www.kikusui.co.jp90
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
•TheKROSeriespayloadweightcanbeincreasedtoapproximately400kgbychangingthecasters.•TheKROSeriesaresoldinkitform.•ThesupportangleisdesignedforKikusuiracksandproducts.Itisnotinterchangeablewithproductsoftheothermanufacturer.*1:Thesesupportangles(OP01-KRC)areequivalenttothesupportanglesincorporatedintothemainrackunit. Theycomeinatwo-item(1-pair)set.Whentheproductweightexceeds70kg,useaweightsupportangle(OP02-KRC).*2:TheseL-shapedfittings(OP03-KRC)securethebaseoftheracktothefloor.Thesetincludesfourmainfittingcomponentsandtheboltsandnutsthatsecurethefittingstothebases.*3:Theseeyebolts(OP04-KRC)arespeciallymadefortheKRCseries.ThesetincludesfourM12eyebolts.
Rack MountVarious Kikusui products can be easily mounted in a rack by using a bracket and rack mount frame, rack adaptor, etc.JIS standards (mill imeter size) and EIA standards (inch size) racks are available. Brackets and rack mount frames, rack adaptors, etc. applicable to each type are also available.Since the width of one panel is 50mm for JIS Standards and 44.45mm for EIA Standards, the bracket and rack mount frame, etc. of the panel width matched to the product body are selected based on one panel width.
RacksThe KRO Series are designed in accordance with both JIS Standards and EIA Standards.
KROSeries
Supportangle
Anchorbolt
The Enclosed type rack (Custom Product on request)The rack system that will be used for concerning the heat generated from the Power Supplies, considerable a mount of t he dust a s a n environmental condition, metal corrosion occur red such as at plat ing factor y, an electrolytic chemical synthesis factory.(*The water cooled unit will be built in the system which require for the water pipe and drain)
KRCSeries
Since these racks are equipped with support angle as standard, even heavy products can be mounted. (With products weighing more than 70kg, use a rack with brackets.) The KRO Series conforms both JIS and EIA standards simply replacing the front panel with the rear panel.The KRC series is a multifunctional decorative rack that is based on a steel cabinet rack and designed to allow the attachment of various rack options. In addition to having models that meet two different standards (JIS and EIA) and being available in two overall heights (1,835 mm and 1,435 mm), this series comes in depths of 800 mm and 950 mm (two types), giving it eight models in all. Also, additional support angles
(two types), base fittings and suspension eyebolts are available as separately sold options.
ModelPayloadweight Numberofpanels Overallheight Weight Thelengthfor
maximumsurfaceSupportangle
Supportleveler
Options
kg JIS EIA mm kg Supportangle Baseholdangle Eyebolt
Openrack(KROseries)
KRO1600
Approx.300
32 36 1825 55
700
12(6pairs)
4KRO1250 25 28 1475 50 10(5pairs)
KRO900 18 20 1125 45 8(4pairs)
Decorativerack(KRCseries)
KRC363LApprox.300
36 1835 95950
12(6pairs)4
OP01-KRCOP02-KRC
*1
OP03-KRC*2
OP04-KRC*3
KRC273L 27 1435 85 10(5pairs)
Decorativerack(KRCseries)
Productionitemuponorder
KRC363
Approx.300
36 1835 90800
12(6pairs)
4
KRC273 27 1435 75 10(5pairs)
KRC160332 1835
90 80012(6pairs)
KRC1603L 95 950
KRC120324 1435
75 80010(5pairs)
KRC1203L 85 950
TheEnclosedtyperack
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
91
RACK ASSEMBLIESRACK ASSEMBLIES
■ Forusewithrackmountingframeandspecialbrackets RMF4 and RMF4M are rack mount frames to be used with standard racks.
Designed to meet the EIA/JIS standards, they are used to install models ranging
from 1/2 rack to 1/6 rack in width using a rack mount frame bracket.
MIN400
KRO900900mm
18 panels pitches900mm
20 panels pitches
KRO12501250mm
25 panels pitches1250mm
28 panels pitches
24 panels pitches 27 panels pitches
KRO1600KRC363(L)KRC1603(L)
1601.5mm32 panels pitches
1601.5mm36 panels pitches
JIS Standard rack (millimeter size)
1 panel height : 50mm
Rack model No.
MIN400
EIA Standard rack (inch size)
1 panel height : 44.45mm
KRO SeriesPitch magnified view
KRC SeriesPitch magnified view
Pitch magnified view
KRO(465)/KRC(452)
7mm
31.75mm
12.7mm
31.75mm
465
1200mm 1200mm
KRO(530)/KRC(570)
KRO(465)/KRC(452)
KRO(530)/KRC(570)
7mm
31.75mm
12.7mm
31.75mm
465
15.875mm
15.875mm
25mm50mm50mm
465
KRC273(L)KRC1203(L)
Racks Mount
Racks & Accessories
RMF-4M
RMF-4444*
465480/482
400H
(mm)
177
10250
5050
199
24.5 (mm)
460480/482
57 132.
5
100
149
Compliedproductsl PAN-ASeriesl PLZ-W2Series
Blankpanel(soldseparately)
Sampleforthebracket(Pairofrightandleftportion)
■Bracket The bracket can be used to install models of 1 (1/1) rack in width directly in
the rack.
■ Forusewithrackadapter KRA3 and KRA150 are rack adapters conforming to EIA/JIS standards to be
used with standard racks. Power supplies can be stored without using brackets.
KRA150
KRA3444*
465480/482
400H
(mm)
177
10250
5050
199
24.5 (mm)
460480/482
57 132.
5
100
149
Compliedproductsl PWRSeries(400/800W)l PASSeriesl PAK-ASeriesl PMC-ASeriesl PMCSeriesl PMPSeriesl PMRSeriesl PCR500Ml PLZ-3WHSeries(TYPEI)l PLZ-4WSeries(TYPEI)l PIA3200/4800Series
■Blankpanel When using brackets to install models liable to give off heat, it is necessary to
provide at least the minimum number of blank panels required for each model.
Plate-type panels and mesh-type blank panels are also available.
Samplefortheblankpanel
www.kikusui.co.jp92
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
EIA Standard Rack (Inch Size) Mounting Options
Product name Bracket Panel "M" is added Rack mount frame Panel
Bracket necessary when
Rack adaptor Panel
model No. width(*) for mesh type model No. width(*)
fastening mainframe to rack model No. width(*) Series Type Width mount frame
PAD-L II1 1 BH4 4(*1) BP191A-M II3 1 BH2 2(*1) BP191-M PAD-LA III 1 KRB5-PAD 5 BP191-M IV 1 KRB11-PAD 11 BP191-M PAT-T 1 KRB3-TOS 3 PAN-A 0 1/4 BP191-M RMF4 4(*1) B42 I2[I3] 1/2 BP191-M RMF4 4(*1) B22 II 1 BH4 4(*1) BP191A-M PAK-A I 1/6 KRA3 3 II 1/3 KRA3 3 III 1/2 KRA3 3 PAS I 1/6 KRA3 3 II 1/3 KRA3 3 III 1/2 KRA3 3 PAM 2kw 1 KRB3-TOS 3 4kw 1 KRB6-PAM 6 PVS 1200 1 Supplied as standard(*4) 1 2800 1 Supplied as standard(*4) 2 PVD-T 6kw 1 Supplied as standard 3 12kw 1 Supplied as standard 6 PWR 400 1/4 KRA3 3 800 1/2 KRA3 3 1600 1 KRB3-TOS 3 PAX/PBX 1 KRB3 3 PMC-A/PMC 1/4 BP191-M KRA3(*3) 3 PMR/PMP 1/3 BP191-M KRA3(*1) 3 PCR-M 500 1/2 KRA3 3 1000/2000 1 KRB3-TOS 3 PCR-LA 500 1 KRB5 5 1000 1 KRB8 8 2000 1 KRB11 11 4000 1 KRB19 19 6000 1 KRB25(*5) 25 PCR-W 2000 1 KRB8(*2) 8 4000 1 KRB11(*2) 11 8000 1 KRB19(*2) 19 12000 1 KRB25(*5) 25 PCR-W2 6000 1 KRB19(*2) 19 PLZ-4W I 1/2 KRA3 3 II 1 KRB3-TOS 3 PLZ2004WB 1 KRB3-TOS 3 PLZ-U PLZ-30F 2/3 KRB3-PLZ-30F 3 PLZ-50F 1 KRB3-PLZ-50F 3 PLZ-3WH I 1/2 KRA3 3 II 1 KRB3 3 PLZ-W2 I 1/6 BP191-M RMF4 4(*1) B24(B11) II 1/3 BP191-M RMF4 4(*1) B24(B11) PIA4810/4820 1/3 BP191-M RMF4 4(*1) B2-PIA4810/4820 KRA3 3 PIA4830 1/6 BP191-M KRA3 3 PIA3200 1/6 BP191-M RMF4 4(*1) B4-PIA KRA3 3
Ele
ctro
nic
Loa
d
DC
pow
er s
uppl
yA
C p
ower
sup
ply
Bracket Blank panel Rack mount frame Rack adapter
* :EIApanelwidthis44.45mm(13/4inch).Thepanelwidthdoesnotincludetherubberfeet,
casters,andlevelers.
*1 :Sincethereareforce-aidcoolingintakeholesinthesideortopandbottomofthemainframe,
whenmountingintherack,theblankpanelatleast1panelwidemustbeinstalled.
*2 :Asupportanglespeciallydesignedfortheracksissupplied.
*3 :Sincethoseappliedmodelsweredesignedforthetypeof"NaturalCooling"unit,soitisrequired
tohavecountermeasureforenoughradiationoftheheatwhenusedwithrackmountingsystem.
*4:Asupportingangle(KRB1-PVS)isneededadditionallywhenstacksmultiplenumberof
PVSpowersupplies.
*5:ModelKRB1150andKRB25willbetheproductionitemuponorder.
•WhenPIA4800andPIA3200powersupplycontrollerarerank-mountedtogetherwiththepower
supply,therankmountframeandrackadaptorarenecessarytobeaddeddependingonthe
seriesoftheconnectedpowersupply.
Powe
r sup
ply
cont
rolle
r
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
93
RACK ASSEMBLIESRACK ASSEMBLIES
JIS Standard Rack (Millimeter Size) Mounting Options
Ele
ctro
nic
Loa
d
DC
pow
er s
uppl
yA
C p
ower
sup
ply
* :JISpanelwidthis50mm.Thepanelwidthdoesnotincludetherubberfeet,casters,andlevelers.
*1 :Sincethereareforced-aircoolingholesinthesideortopandbottomofthemainframe,when
mountingintherack,theblankpanelatleast1panelwidthmustbeinstalled.
*2 :Asupportanglespeciallydesignedfortheracksissupplied.
*3 :Sincethoseappliedmodelsweredesignedforthetypeof"NaturalCooling"unit,soitisrequired
tohavecountermeasureforenoughradiationoftheheatwhenusedwithrackmountingsystem.
*4:Asupportingangle(KRB1-PVS)isneededadditionallywhenstacksmultiplenumberof
PVSpowersupplies.
*5:ModelKRB1150andKRB25willbetheproductionitemuponorder.
•WhenPIA4800andPIA3200PowerSupplyControllerarerack-mountedtogetherwiththepower
supply,therackmountframeandrackadaptorarenecessarytobeaddeddependsontheseries
oftheconnectedpowersupply.
Bracket Blank panel Rack mount frame Rack adapter
Powe
r sup
ply
cont
rolle
r
Product name Bracket Panel "M" is added Rack mount frame Panel
Bracket necessary when
Rack adaptor Panel
model No. width(*) for mesh type model No. width(*)
fastening mainframe to rack model No. width(*) Series Type Width mount frame
PAD-L II1 1 BH4M 4(*1) BP1H-M II3 1 BH2M 2(*1) BP1H-M PAD-LA III 1 KRB250-PAD 5 BP1H-M IV 1 KRB500-PAD 10 BP1H-M PAT-T KRB150-TOS 3 PAN-A 0 1/4 BP1H-M RMF4M 4(*1) B42 I2[I3] 1/2 BP1H-M RMF4M 4(*1) B22 II 1 BH4M 4(*1) BP1H-M PAK-A I 1/6 KRA150 3 II 1/3 KRA150 3 III 1/2 KRA150 3 PAS I 1/6 KRA150 3 II 1/3 KRA150 3 III 1/2 KRA150 3 PAM 2kw 1 KRB150-TOS 3 4kw 1 KRB300-PAM 6 PVS 1200 1 Supplied as standard(*4) 1 2800 1 KRB100-PVS 2 PVD-T 6kw 1 Supplied as standard 3 12kw 1 Supplied as standard 6 PWR 400 1/4 KRA150 3 800 1/2 KRA150 3 1600 1 KRB150-TOS 3 PAX/PBX 1 KRB150 3 PMC-A/PMC 1/4 BP1H-M KRA150(*3) 3 PMR/PMP 1/3 BP1H-M KRA150(*1) 3 PCR-M 500 1/2 KRA150 3 1000/2000 1 KRB150-TOS 3 PCR-LA 500 1 KRB250 5 1000 1 KRB400 8 2000 1 KRB500 10 4000 1 KRB850 17 6000 1 KRB1150(*5) 23 PCR-W 2000 1 KRB400(*2) 8 4000 1 KRB500(*2) 10 8000 1 KRB850(*2) 17 12000 1 KRB1150(*5) 23 PCR-W2 6000 1 KRB850(*2) 17 PLZ-4W I 1/2 KRA150 3 II 1 KRB150-TOS 3 PLZ2004WB 1 KRB150-TOS 3 PLZ-U PLZ-30F 2/3 KRB150-PLZ-30F 3 PLZ-50F 1 KRB150-PLZ-50F 3 PLZ-3WH I 1/2 KRA150 3 II 1 KRB3 3 PLZ-W2 I 1/6 BP1H-M RMF4M 4(*1) B24(B11) II 1/3 BP1H-M RMF4M 4(*1) B24(B11) PIA4810/4820 1/3 BP1H-M RMF4 4(*1) B2-PIA4810/4820 KRA150 3 PIA4830 1/6 BP1H-M KRA150 3 PIA3200 1/6 BP1H-M RMF4 4(*1) B4-PIA KRA150 3
www.kikusui.co.jp94
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
PWR Series External dimensional diagrams / Rack Mount Option
106.5
124
MAX
145
MAX20MAX470
400
214
124
MAX
20M
AX15
5
400MAX20MAX470
428.5
128
MA
X15
0
MAX10MAX450
400MAX20MAX470
KRA150
460
480
460
482
149
24.5
100
132.
5
57
260
260
37.7
5
KRA3
KRB150-TOS
KRB3-TOS
460477.9
460477.9
37.5
57
132
100
24.5
149
KRA150
460
480
460
482
149
24.5
100
132.
5
57
260
260
37.7
5
KRA3
■ 400WTYPE(4unitscanberackmounted)PWR400L/PWR400M/PWR400H
■ 800WTYPE(2unitscanberackmounted)PWR800L/PWR800M/PWR800H
■ 1600WTYPEPWR1600L/PWR1600M/PWR1600H
Output (Rear) M8 (Front) M6Input AC inletAccessory power cable approx. 2.4m long
Output (Rear) M8 (Front) M6Input AC inlet Accessory power cable approx. 3m long
Output (Rear) M8 (Front) M6Input Terminal M4Accessory power cable approx. 3m long
Unit:mm
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
95
RACK ASSEMBLIESRACK ASSEMBLIES
MAX20 MAX50350
MA
X15
0
71
124
142.5
MA
X16
0M
AX
2512
4
MA
X16
0M
AX
2512
4
214
MAX420
260
132.5
460482
5737.75
149
460480
100
24.5
260
149
100
460480
24.5
260
132.5
57
460482
37.75
260
132.5
57
460482
37.75
260
149
100
460480
24.5
260
RackAdapterKRA150
BlankPanelKBP3-2
BlankPanelKBP3-6
RackAdapterKRA150
BlankPanelKBP3-3
BlankPanelKBP3-2
RackAdapterKRA150
BlankPanelKBP3-2
BlankPanelKBP3-6
RackAdapterKRA3
BlankPanelKBP3-3
BlankPanelKBP3-2
RackAdapterKRA3
BlankPanelKBP3-2
RackAdapterKRA150
BlankPanelKBP3-2
PAS Series External dimensional diagrams / Rack Mount Option
■TYPEIPAS10-35/PAS20-18PAS40-9/PAS60-6PAS80-4.5/PAS160-2PAS320-1/PAS500-0.6
■TYPEIIPAS10-70/PAS20-36PAS40-18/PAS60-12PAS80-9/PAS160-4PAS320-2/PAS500-1.2
Output M8 boltInput AC inletAttached power cable SVT3 18AWG 3P plug, with
connector Cable length 2.4m
Output M8 boltInput AC inletAttached power cable SVT3 18AWG 3P plug, with
connector Cable length 2.4m
Output M8 boltInput Terminal M4 Attached power cable VCT3 3.5 mm2 plug, without
connector Cable length 3m
■ TYPEI(6unitscanberackmounted)
■ TYPEII(3unitscanberackmounted)
■ TYPEIII(2unitscanberackmounted)
Unit:mm■TYPEIIIPAS10-105/PAS20-54PAS40-27/PAS60-18PAS80-13.5/PAS160-6PAS320-3/PAS500-1.8
www.kikusui.co.jp96
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
PAK-A Series External dimensional diagrams / Rack Mount Option
■ TYPEI(6unitscanberackmounted)
149
100
460480
RackadaptorKRA150
BlankpanelKBP3-3
BlankpanelKBP3-2
149
100
460480
RackadaptorKRA150
BlankpanelKBP3-2
149
460480
100
RackadaptorKRA150
BlankpanelKBP3-2
BlankpanelKBP3-6
132.
5
57
460482
RackadaptorKRA3
BlankpanelKBP3-2
132.
5
460482
57
RackadaptorKRA3
BlankpanelKBP3-2
BlankpanelKBP3-6
132.
5
57
460482
RackadaptorKRA3
BlankpanelKBP3-3
BlankpanelKBP3-2
24.5
37.7
537
.75
37.7
5
24.5
24.5
260 260
260
260
260
260
124
ラックアダプタKRA150
MA
X13
4
71 MAX25 MAX60350±3
ブランクパネルKBP3-3
ブランクパネルKBP3-2149
100
465480
MA
X10
124
214
MA
X14
4
*Those models indicated with a "✰" are not equipped with an output terminal on the front panel.
MA
X14
4
142.5
124
MA
X10 M
AX
1012
4
350214
MA
X10
MAX435
MAX25
Output (Rear) M6 bolt (Front) Binding post M6Input Terminal M4Attached power cable 3-wire 18AWG, approx. 2.5m long
Output (Rear) M6 bolt (Front) Binding post M6Input Terminal M4Attached power cable 3-wire 3.5mm2, approx. 2.5m long
Output (Rear) M8 bolt (Front) Binding post M6Input Terminal M4Attached power cable 3-wire 3.5mm2, approx. 2.5m long
■TYPEIPAK6-60A✰PAK20-18APAK35-10APAK60-6A
■TYPEIIPAK6-120A✰PAK35-20APAK60-12A
■ TYPEII(3unitscanberackmounted)
■ TYPEIII(2unitscanberackmounted)
Unit:mm■TYPEIIIPAK6-160A✰PAK35-30APAK60-18A
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
97
RACK ASSEMBLIESRACK ASSEMBLIES
429.5
262
MA
X28
512
8M
AX
150
429.5 548
MAX665
MAX20
MAX20 548
MAX665
Auxiliaryoutputterminalcover*
*PAM40-50doesnothaveauxiliaryoutputterminals.
Auxiliaryoutputterminalcover**
**PAM40-100andPAM80-50donothaveauxiliaryoutputterminals.
464480
460480
BracketKRB3-TOS Bracket
KRB150-TOS
132
57 149
100
299
5015
050
480
460480
464
266
5776
57
BracketKRB300-PAM
BracketKRB6-PAM
PAM Series External dimensional diagrams / Rack Mount Option
■ 2kWTYPEPAM40-50/PAM80-25PAM160-12/PAM320-6
■ 4kWTYPEPAM40-100/PAM80-50PAM160-25/PAM320-12
Unit:mm
www.kikusui.co.jp98
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
Unit:mmPAT-T Series External dimensional diagrams / Rack Mount Option
PMC/PMC-A Series External dimensional diagrams / Rack Mount Option
Output (Front) Binding post M6Input AC inletAccessory power cable approx. 2.5m long
■ TYPEI(PMCSeries)PMC18-2/PMC18-3PMC35-1/PMC35-2
■ TYPEII(PMCSeries)PMC18-5/PMC35-3
(4unitscanberackmounted) Unit:mm
430
MAX 440
129.
2
MA
X 1
55
MA
X 2
0
MA
X 6
20
550
Output PAT20-400T : M12 PAT40-200T : M10 PAT60-133T : M10Input Terminal M6
■ TYPEI(PMC-ASeries)PMC18-1A/PMC18-2APMC18-3A/PMC35-0.5APMC35-1A/PMC35-2A
■ TYPEII(PMC-ASeries)PMC18-5A/PMC35-3APMC70-1A/PMC110-0.6APMC160-0.4A/PMC250-0.25APMC350-0.2A/PMC500-0.1A
132.
557
37.7
5
460482
260
Blank Panel KBP3-4
Blank Panel KBP3-2
PMC Series
PMC-A Series
149
100
460480
260
Blank Panel KBP3-4
Blank Panel KBP3-2
24.5
107
124
MA
X13
4
MAX15
Dimensional Drawings [ ] for Type II
270[350]
MAX290[MAX370]
MAX15 270[350]
MAX305[MAX385]
Rack adaptor KRA3 Rack adaptor KRA150
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
99
RACK ASSEMBLIESRACK ASSEMBLIES
132.
557
37.7
5
460482
260
RackadaptorKRA3BlankpanelKBP3-3
149
100
24.5
460480
260
RackadaptorKRA150BlankpanelKBP3-3
MA
X25
MA
X16
012
4
142.5MAX20
MAX380350
124
PMR Series External dimensional diagrams / Rack Mount Option
PMR18-2.5DU/PMR35-1.2DUPMR18-1.3TR/PMR25-1TRPMR24-1QU
Output (Front) Binding post M6Input AC inletAccessory power cable approx. 2.5m long
(3unitscanberackmounted)Unit:mm
PMP Series External dimensional diagrams / Rack Mount Option
PMP18-3TRPMP25-2TRPMP16-1QU
Output (Front) Binding post M6Input AC inletAccessory power cable approx. 2.5m long
(3unitscanberackmounted) Unit:mm
Rack Adaptor KRA3Blank panel KBP3-3 Rack Adaptor KRA150Blank panel KBP3-3
www.kikusui.co.jp100
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
PVS Series External dimensional diagrams / Rack Mount Option
444
MAX625
MAX30
31.7
43.4
R3.2
-6.4×
11.4 463.8
483
43.4
31.7
463.8482.6Standardbracketforbothinchandmetricsize
■ 1200WTYPE
Model TYPE Dimensions(Max):W✕H✕Dmm* Inputterminal Outputterminal Inputpowercable[standard]
PVS7.5-140 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS12-100 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS20-60 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS40-30 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS60-20 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS100-12 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS150-8 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS300-4 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS600-2 1200WTYPE 429(483)✕43.4✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS7.5-300 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS12-220 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS20-130 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS40-70 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS60-46 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS100-28 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Steelbusbar 3✕12AWG,Approx.3m
PVS150-18 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS300-9 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
PVS600-4 2800WTYPE 431.8(483)✕87.63✕444(625) three-terminalwireclampingconnector Four-terminalwireclampingconnector 3✕12AWG,Approx.3m
*Valuesinparenthesesindicatethemaximumdimensionsincludingprotrusionssuchasbrackets.Standardbracketfortheinchsize.
BracketKRB100-PVSBracketsuppliedasstandard
87.6
3
76.2
463.8483
99
50
459.3480.3
76.2
87.6
3
463.8
483
MAX30
MAX625
444431.8
■2800WTYPE
Unit:mm
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
101
RACK ASSEMBLIESRACK ASSEMBLIES
263
460483
Standardbracketforbothinchandmetricsize
PVD-T Series External dimensional diagrams / Rack Mount Option
462
MAX650*
*ThemaximumdepthofPVD300-20TandPVD600-10Tis585mm.
MAX50
133
5737
.56.
4
460
24.56
50
483
263
460483
462MAX615
MAX40
5050
57.1
56.
476
.157
.15
35.3
5055
6
133
460483
Standardbracketforbothinchandmetricsize
Model TYPE Dimensions(Max):W✕H✕Dmm* Inputterminal Outputterminal Inputpowercable[standard]
PVD10-600T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews M8 10,3m
PVD20-300T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews M8 10,3m
PVD40-150T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews M8 10,3m
PVD60-100T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews M8 10,3m
PVD80-75T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews M8 10,3m
PVD100-60T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 10,3m
PVD150-40T 6kWTYPE 483✕133✕462(650) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 10,3m
PVD300-20T 6kWTYPE 483✕133✕462(585) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 10,3m
PVD600-10T 6kWTYPE 483✕133✕462(585) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 10,3m
PVD10-1200T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews M8 13.3,3m
PVD20-600T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews M8 13.3,3m
PVD40-300T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews M8 13.3,3m
PVD60-200T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews M8 13.3,3m
PVD80-150T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews M8 13.3,3m
PVD100-120T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 13.3,3m
PVD150-80T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 13.3,3m
PVD300-40T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 13.3,3m
PVD600-20T 12kWTYPE 483✕263✕462(615) Theterminalswiththetypeoftightenscrews Theterminalswiththetypeoftightenscrews 13.3,3m
*Valuesinparenthesesindicatethemaximumdimensionsincludingprotrusionssuchasbrackets.Standardbracketfortheinchsize.
■ 6kWTYPE
■12kWTYPE
Unit:mm
www.kikusui.co.jp102
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
PAN-A Series External dimensional diagrams / Rack Mount OptionUnit:mm
■ 175WTYPE(TYPE0)(4unitscanberackmounted)
PAN16-10A/PAN35-5APAN60-3A/PAN70-2.5APAN110-1.5A/PAN160-1A
199
5050
5024.5
465
480BlankpanelBP2
BlankpanelBP4
RackmountframeRMF4M
BracketB42
199
5050
5024.5
465
480
BlankpanelBP2
BracketB22
RackmountframeRMF4M
BracketBH4M
199
480
5050
50
460
24.5
177
102
37.5
465
482BlankpanelBP2
BlankpanelBP4
RackmountframeRMF4
BracketB42
177
102
37.5
465
482BlankpanelBP2
BracketB22
RackmountframeRMF4
BracketBH4
160
482
102
462
21.5
Output (Rear) Terminal M4 (Front) Binding post M6 (auxiliary output terminal)Input AC inletAttached power cable SVT3 × 18AWG, approx. 3m long, with 3P plug
MAX35
MA
X17
514
0M
AX
20
106
MAX115
MAX470
400
Output (Rear) Terminal M4 (Front) Binding post M8 (auxiliary output terminal)Input 350W Type:AC inlet 700W Type:Terminal M4Attached power cable 350W Type: SVT3 × 18AWG, approx. 3 m long,
with 3P plug 700W Type: Nominal sectional area 2.0 SQ. mm,
cabtyre cable, with 3P plug, approx. 3m long(For PAN35-20A: Norminal sec-tional area 3.5 SQ. mm,cabtyre cable, approx. 3m long)
Output (Rear) Terminal M4 (M5 for PAN16-50A) (Front) Binding post M8 (auxiliary output terminal)Input Terminal M4Attached power cable Nominal sectional area 3.5 SQ. mm,
cabtyre cable, without plug, approx. 3 m long)
Note:There is no auxiliary output terminal, on the front panel of Model PAN16-50A.
MAX10MAX45
[400]350
MAX235 210
140
MA
X16
0
[505]MAX425
*[ ] : TYPE I3
430
MAXBMAXC
400MAXA
160
MA
X17
5
MODEL MAXA MAXB MAXCPAN16-50A 40 500 60PAN35-30APAN60-20APAN70-15APAN110-10APAN160-7APAN250-4.5APAN350-3.5APAN600-2A
45 505 60
■ 350WTYPE(TYPEI2)/700WTYPE(TYPEI3)(2unitscanberackmounted)
■ 350W TYPEPAN16-18A/PAN35-10APAN60-6A/PAN70-5APAN110-3A/PAN160-2A
■ 1000WTYPE(TYPEII)PAN16-50A/PAN35-30APAN60-20A/PAN70-15APAN110-10A/PAN160-7APAN250-4.5A/PAN350-3.5APAN600-2A
■ 700W TYPEPAN16-30A/PAN35-20APAN60-10A/PAN70-8APAN110-5A/PAN160-3.5APAN250-2.5A
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
103
RACK ASSEMBLIESRACK ASSEMBLIES
PAD-L/LP Series External dimensional diagrams / Rack Mount OptionUnit:mm*Mounting precaution
Since there are forced-air cooling intake holes in the mainframe, when mounting it in the rack, the blank panel at least 1 panel width must be installed.
Output Terminal M12 boltInput Terminal M8 (3-phase type: M6)Accessory power cable 3-wire 14mm2 , approx. 4m long (3-phase type: 4-wire 14mm2, 4m*)*35-200LT: 4-wire 8mm2 4m*PAD110-60L: OutputTerminal M6 bolt Input Terminal M6
840
MA
X93
5
MAX612[MAX739]
5004242
584[684]
[600]
*[]:TYPEV2
430
■ TYPEV(V2)■ TYPE VPAD35-200L/PAD35-200LTPAD60-120L/PAD110-60L
■ TYPE V2
PAD35-300LPT/PAD60-200LPT
MAX520465MAX40430
MAX440
MA
X57
548
4.6MAX625
549MAX40
430MAX440
MA
X27
521
8
481.5
461.5
37.5
488
488
150
150
100
133
146
121
459.5479.5
24.5
BracketKRB11-PAD
BracketKRB500-PAD
461.5480.8
37.5
133.
522
150
458.8478.8
24.5
200
249
24.5
BracketKRB5-PAD
BracketKRB250-PAD
■ TYPEIVPAD36-100LA/PAD60-60LAPAD110-32LA/PAD250-15LA
■ TYPEIIIPAD16-100LA/PAD36-60LAPAD60-35LA/AD72-30LAPAD110-20LA/PAD250-8LA
PAD-LA Series External dimensional diagrams / Rack Mount Option
www.kikusui.co.jp104
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
460
480
50
149
24.5
MAX45
450[550]MAX15
132
MAX450
430
460
482 57
132.5
37.7
5
BracketKRB3
BracketKRB150
*[]:TYPEII
Output (Rear)TerminalM4(PAX35-30:BarterminalM6)(Front)BindingpostM6(auxiliaryoutputterminal)
Input TerminalM4Attachedwithinputpowercable
■TYPEIPAX35-10PBX20-5PBX40-2.5
■TYPEIIPAX35-20PAX35-30PBX20-10PBX20-20PBX40-5PBX40-10
MA
X1
5
PAX and PBX Series External dimensional diagrams / Rack Mount OptionUnit:mm
Unit:mmPCR-M Series External dimensional diagrams / Rack Mount Option
(465)482
132.
557
37.7
5
(460)480
24.5
100
149
RackadaptorKRA3 RackadaptorKRA150
MAX20
124
MA
X1
50
214
350MAX395
MA
X2
5
■ PCR500M(2unitscanberackmounted)Output (Front) Outlet (Rear) Terminal M4Input Terminal M4Accessory power cable approx. 2.4m long
■ PCR1000M/PCR2000M(Example:PCR1000M)Output (Front) Outlet (Rear) Terminal M4Input Terminal M4Accessory power cable approx. 3m long
350
MAX
30
MAX
400
MAX
2012
8M
AX 15
0
429MAX 450
MAX 15
(465)
132 57
37.7
5
(460)478
478
24.5
100149
Bracket KRB3-TOS Bracket KRB150-TOS
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
105
RACK ASSEMBLIESRACK ASSEMBLIES
PCR500LA/1000LA/2000LAPCR-W/W2 Series
550
MAX595
MAX40
PCR4000LA/6000LA
550
MAX605
MAX40
PCR-LA and PCR-W/W2 Series External dimensional diagrams / Rack Mount OptionUnit:mm Model Dimensions(Max):W✕H✕Dmm Inputterminal Outputterminal Inputpowercable[standardaccessory]
PCR500LA 430(455)✕217(245)✕550(595) (Inlet) M4 Exclusivedesignedcable,2mm2/3mwithathreeprongedplug PCR1000LA 430(455)✕351(415)✕550(595) M6 M6 Three-coreheavyPVCjacketedcable,5.5mm2/3m PCR2000LA 430(455)✕484(545)✕550(595) M6 M6 Single-core,8mm2/3m PCR4000LA 430(455)✕839(920)✕550(605) M6 M6 Single-core,22mm2/3m PCR6000LA 430(455)✕1105(1190)✕550(605) M6 M6 Single-core,22mm2/3m PCR2000W 430(450)✕351(415)✕550(595) M6 M6 Single-core,5.5mm2,approx.3m PCR4000W 430(450)✕484(545)✕550(595) M6 M6 Single-core,14mm2,approx.3m PCR8000W 430(450)✕839(920)✕550(595) M6 M6 Single-core,14mm2,approx.3m PCR12000W 430(450)✕1105(1190)✕550(595) M8 M8 Single-core,22mm2,approx.3m PCR6000W2 430(450)✕839(920)✕550(595) M6 M6·M6 Single-core,14mm2,approx.5m PCR12000W2 430(450)✕1238(1320)✕550(595) M8 M8·M6 Single-core,22mm2,approx.5m
www.kikusui.co.jp106
RACK ASSEMBLIESRACK ASSEMBLIES RACK ASSEMBLIESRACK ASSEMBLIES
292
128
MAX150
128
MAX150
MAX10
MAX315
435MAX10
MAX460
MAX 470
40 0MAX 20
149
24.5
100(460)
480
KRB150 -PLZ-30F132
37.5
57482
(465)
KRB3-PLZ-30F
149100
24.5
484. 4
(465)
KRB150 -PLZ-50F
132484. 4
37.5
57
KRB3-PLZ-50F
(465)
PLZ-U Series External dimensional diagrams / Rack Mount OptionUnit:mm
DC input terminals (Rear) M6
(Front) M6Input AC inletAttached power cable SVT3 18AWG 3P plug, Cable length 2.4m
www.kikusui.co.jp
RACK ASSEMBLIESRACK ASSEMBLIES
107
RACK ASSEMBLIESRACK ASSEMBLIES
PLZ-3WH and PLZ-4W Series External dimensional diagrams / Rack Mount OptionUnit:mm
MAX45400
MAX35
MA
X1
012
4
MA
X20
214430
128
MA
X25
MAX450 MAX45400
MAX15
149
100
24.5
460480 260 430
132.
557
37.7
5
460482 260 430
460482 5
7
132.5
37.7
5
RackmountbracketKRB3
460
480
50
149
24.5
RackmountbracketKRB150
RackadapterKRA3
RackadapterKRA150
DC input terminals (Rear) M8
Input AC inletProvided with a power cable with three-pronged power plug
■ TYPEI(PLZ-3WHSeries)(2unitscanberackmounted)PLZ153WH / PLZ303WH
■ TYPEII(PLZ-3WHSeries)
PLZ603WH / PLZ1003WH
DC input terminals (Rear) M6
(Front) M6Input AC inletProvided with a power cable with three-pronged power plug
■ TYPEI(PLZ-4WSeries)(2unitscanberackmounted)PLZ164W/PLZ334W/PLZ164WA
■ TYPEII(PLZ-4WSeries)
PLZ1004W/PLZ664WA
DC input terminals (Rear) M8
(Front) M6Input AC inlet
DC input terminals (Rear) M8 (Front) M6
PLZ2004WBDC input terminals
(Rear) M12Input AC inlet
MAX40400
MAX30
MA
X1
112
4
MA
X20
214.5 429.512
8M
AX
22MAX455
MAX40400
MAX30
465479
57
13
2
37
.5
465479
10
0
14
9
24
.5
RackmountbracketKRB3-TOS
RackmountbracketKRB150-TOS
149
100
24.5
460480 260 430
132.
557
37.7
5
460482 260 430
460482 5
7
13
2.5
37
.75
RackmountbracketKRB3
460
480
50
14
9
24
.5
RackmountbracketKRB150
RackadapterKRA3
RackadapterKRA150
■ TYPEI(PLZ-3WHandPLZ-4WSeries)
■ TYPEII(PLZ-3WHSeries)
■ TYPEII(PLZ-4WSeries)
*The length for Model PLZ2004WB is 550(600)mm
* The front panel for Model PLZ2004WB is designed differently, but external size is the same
www.kikusui.co.jp108
RACK ASSEMBLIESRACK ASSEMBLIES
PLZ-W2 Series External dimensional diagrams / Rack Mount Option
DC input terminals (Rear) Terminal M3
(Front) Binding post M6Input AC cable
65
MAX75 MAX145
140
MA
X1
55
MA
X1
0
MAX25 MAX22298
140
MA
X1
0M
AX
15
138
348
MAX27
MAX30
199
5050
5024
.5
465
480BlankpanelBP2
BlankpanelBP6
BracketB24
RackmountframeRMF4M
177
102
37.5
465
482BlankpanelBP2
BlankpanelBP6
BracketB24
RackmountframeRMF4
199
5050
5024
.5
465
480BlankpanelBP2
BlankpanelBP6
BracketB24
RackmountframeRMF4M
177
102
37.5
465
482BlankpanelBP2
BlankpanelBP6
BracketB24
RackmountframeRMF4
■ PLZ72W(6unitscanberackmounted) ■ PLZ152W(3unitscanberackmounted)
DC input terminals (Rear) Terminal M5
(Front) Binding post M8Input AC cable
Mounting precaution : Since there are forced-air cooling intake holes in the mainframe, when mounting in the rack, the blank panel at least one panel width must be installed.
Unit:mm
Printed in Japan Issue:Jun.2009 20090610KCMEC11a
■ All products contained in this catalogue are equipment and devices that are premised on use under the supervision of qualifi ed personnel, and are not designed or produced for home-use or use by general consumers. ■ Specifi cations, design and so forth are subject to change without prior notice to improve the quality. ■ Product names and prices are subject to change and production may be discontinued when necessary. ■ Product names, company names andbrand names contained in this catalogue represent the respective registered trade name or trade mark. ■ Colors, textures and so forth of photographs shown in this catalogue may differ from actual products due to a limited fi delityin printing. ■ Although every effort has been made to provide the information as accurate as possible for this catalogue, certain details have unavoidably been omitted due to limitations in space. ■ If you fi nd any misprints or errors in this catalogue, it would be appreciated if you would inform us. ■ Please contact our distributors to confi rm specifi cations, price, accessories or anything that may be unclear when placing an order or concluding a purchasing agreement.
●Distributor/Representative
1633 Bayshore Highway, Suite 331, Burlingame, CA 94010Phone : 650-259-5900 Facsimile : 650-259-5904
www.kikusuiamerica.com
www.kikusui.cnRoom, D-01,11F, Majesty Bld, No.138, Pudong Ave, Shanghai City Phone : 021-5887-9067 Facsimile : 021-5887-9069
1-877-876-2807
Top Related