PROJECT
DEVELOPMENT
GUIDE
Prepared by:
Division of Design Services
Bureau of Engineering and Construction
Connecticut Department of Transportation
October 2012
Table of Contents
ii
Section Number Description Page
List of Exhibits.......................................................................... vi
1.0 FUNDAMENTALS....................................................................................... 1
1.1 Nomenclature............................................................................................ 1
1.1.1 Glossary..................................................................................... 1
1.1.2 Abbreviations and Acronyms................................................... 7
1.2 Introduction................................................................................................ 12
1.2.1 Purpose, Coverage and Structure of Guide................................ 13
1.2.2 Relationship to Other Publications............................................ 13
1.3 Project Development Principles and Concepts................................. 14
1.3.1 Principles.................................................................................... 15
1.3.2 Systematic Decision Making..................................................... 16
1.3.3 Context Sensitive Solutions/Design........................................... 23
1.3.4 Public Involvement and Public Information.............................. 23
1.4 Environmental Considerations and Requirements........................... 24
1.4.1 Overview.................................................................................... 25
1.4.2 Major Participants, Roles and Responsibilities......................... 27
1.4.3 Common Categories of Impacts................................................. 29
1.4.4 Environmental Review Processes.............................................. 31
1.5 Project Development Phases and Project Categories...................... 43
1.5.1 Project Development Phases..................................................... 46
1.5.2 Minor Projects........................................................................... 47
1.5.3 Intermediate Projects................................................................. 47
1.5.4 Major Projects........................................................................... 48
2.0 DETAILED PROCESS GUIDANCE................................................... 52
2.1 Project Development Cost..................................................................... 52
2.2 Typical Activity Patterns, By Phase.................................................... 56
2.2.1 Typical Project Initiation Phase................................................ 57
2.2.2 Typical Preliminary Design Phase (Without Studies).............. 58
2.2.3 Typical Preliminary Design Phase (With Studies)................... 66
2.2.4 Typical Final Design Phase....................................................... 71
2.2.5 Typical Contract Development Phase....................................... 75
2.3 Activity Descriptions, By Phase........................................................... 75
Table of Contents
iii
Section Number Description Page
2.3.1 Project Initiation Phase............................................................. 76
2.3.2 Studies/Preliminary Design Phase........................................... 81
2.3.3 Final Design Phase.................................................................... 103
2.3.4 Contract Development Phase................................................... 121
3.0 DESIGN SUBMISSION REQUIREMENTS................................... 125
3.1 Requirements at Design Completion................................................... 124
3.1.1 Construction Plans.................................................................... 125
3.1.2 Special Provisions..................................................................... 125
3.1.3 Construction Cost Estimate and Schedule................................ 126
3.1.4 Design Report and Design Statement....................................... 128
3.1.5 Other Documentation................................................................ 131
3.2 Milestone Submissions........................................................................... 131
3.2.1 Overview................................................................................... 131
3.2.2 Studies Submission................................................................... 136
3.2.3 Preliminary Design Submission................................................ 137
3.2.4 Drainage Submission............................................................... 138
3.2.5 Semi-Final Design Submission................................................. 138
3.2.6 Final Plans for Review Submission.......................................... 139
3.2.7 Final Design Plans Submission................................................. 139
3.3 Other Deliverables................................................................................... 139
3.3.1 Property Maps........................................................................... 139
3.3.2 Environmental Analysis/Support.............................................. 140
3.3.3 Permit Applications................................................................... 140
3.3.4 Design Exceptions.................................................................... 140
3.3.5 Interstate Point of Access Modification Requests.................... 140
3.3.6 Interim/Progress Submissions................................................... 140
4.0 APPROVALS.................................................................................................... 141
4.1 Initiation and New Phases...................................................................... 141
4.1.1 Financial and Programming...................................................... 142
4.2 Agreements................................................................................................ 144
Table of Contents
iv
Section Number Description Page
4.2.1 Utility Agreements.................................................................... 144
4.2.2 Railroad/Highway Agreements................................................. 144
4.2.3 Municipal Agreements.............................................................. 144
4.3 Plans (Outside Contract Documents).................................................. 144
4.3.1 Financial Plans.......................................................................... 145
4.3.2 Project Management Plans........................................................ 145
4.3.3 Transportation Management Plans........................................... 145
4.4 Consultant Administration..................................................................... 145
4.4.1 Retaining a Consultant.............................................................. 145
4.4.2 Entering a Consultant Supplemental Agreement...................... 146
4.4.3 Consultant Agreements and Supplemental Agreements........... 146
4.4.4 Consultant Scope of Services.................................................... 146
4.4.5 Consultant Notice to Proceed.................................................... 147
4.5 Technical.................................................................................................... 147
4.5.1 Hydraulic Engineer................................................................... 147
4.5.2 Hydraulics/Drainage Programs................................................. 147
4.5.3 Railroad Clearances.................................................................. 147
4.5.4 Structure Type Studies.............................................................. 147
4.5.5 Rehabilitation Study Reports.................................................... 148
4.5.6 Structure Layout for Design...................................................... 148
4.5.7 Pilot Boring Plans..................................................................... 148
4.5.8 Subsurface Exploration Programs............................................. 148
4.6 Construction Documents and Procurement....................................... 149
4.6.1 Public Interest Findings............................................................ 149
4.6.2 Plans, Specifications and Estimates.......................................... 149
4.6.3 Waivers to Advertise................................................................. 149
4.6.4 Advertise for Bids..................................................................... 149
4.6.5 Addenda.................................................................................... 150
4.7 Other............................................................................................................ 150
4.7.1 Design Exceptions..................................................................... 150
Table of Contents
v
Section Number Description Page
4.7.2 Major Scope Revisions............................................................. 150
4.7.3 Environmental Documentation................................................. 150
4.7.4 Interstate Point of Access Modification.................................... 152
4.7.5 Design Approval....................................................................... 152
4.7.6 Value Engineering..................................................................... 152
4.7.7 Rail Regulatory Approval......................................................... 152
List of Exhibits
Number Title Page
vi
1 Project development process concept........................................................... 12
2 Department project development references................................................. 14
3 Comparison of example acceptable/unacceptable needs statements............ 17
4 Example evaluation matrix........................................................................... 22
5 Common environmental laws, regulations and references........................... 25
6 NEPA document flow chart.......................................................................... 33
7 Typical agency environmental activities and roles....................................... 39
8 Project categories.......................................................................................... 44
9 Project development within project life........................................................ 45
10 Schematic for development of minor projects.............................................. 49
11 Schematic for development of intermediate projects.................................... 50
12 Schematic for development of major projects.............................................. 51
13 Example of percentages used to develop engineering cost for
programming purposes.............................................................................. 53
14 Sample engineering cost worksheet.............................................................. 54
15 Typical activity patterns, by project phase and type..................................... 56
16 Typical project initiation activities, consultant-designed projects................ 57
17 Typical project initiation activities, State-designed projects........................ 57
18 Typical preliminary design activities, minor projects (no studies)............... 58
19 Typical preliminary design activities, intermediate projects (no
studies)...................................................................................................... 60
20 Typical preliminary design activities, major projects, CATX (no
studies)...................................................................................................... 62
21 Typical preliminary design activities, major projects, EA or EIS (no
studies)...................................................................................................... 64
22 Typical preliminary design activities, major projects, CATX (with
studies)...................................................................................................... 66
23 Typical preliminary design activities, major projects, EA or EIS (with
studies)...................................................................................................... 68
24 Typical final design activities, minor projects.............................................. 71
25 Typical final design activities, intermediate and major projects.................. 73
List of Exhibits
Number Title Page
vii
26 Typical contract development activities, minor projects.............................. 75
27 Typical contract development activities, intermediate and major projects.. 75
28 Typical schedule milestones......................................................................... 77
29 Design Report outline................................................................................... 128
30 Design Statement outline.............................................................................. 130
31 Milestone submissions.................................................................................. 132
32 Items included with highway milestone submissions.................................. 134
33 Plans included with highway milestone submissions................................... 134
34 Color convention for annotated display plans.............................................. 137
35 Summary of individual approvals required to initiate a project or new
phase......................................................................................................... 142
36 Summary of agency roles for different types of environmental
(CEPA/NEPA) documentation................................................................. 151
- 1 -
1.0 FUNDAMENTALS This section provides the basic background information related to development of
transportation projects for the Connecticut Department of Transportation (Department).
Section 2 provides detailed information using the nomenclature, principals and concepts
outlined in here.
1.1 Nomenclature An extensive lexicon has developed around the transportation profession and within
individual organizations. The same word or term may have different meanings. To
facilitate effective communications, this section identifies and defines various terms used
in this Guide.
1.1.1 Glossary
Advisory Council on Historic Preservation: An independent federal agency that
promotes the preservation, enhancement, and productive use of historic resources.
Approval: Documented acceptance of a proposal.
Bureau of Engineering and Construction: Department bureau responsible for
implementation of the capital program for all transportation modes. It includes
engineering and construction services as well as property acquisition and management,
research and material testing.
Bureau of Finance and Administration: Department bureau responsible for funds
management, construction contract procurement and award and other functions.
Bureau of Highway Operations: Department bureau responsible for the safe operation
and maintenance of the State’s highway and bridge system including snow and ice
control, equipment repair and maintenance.
Bureau of Policy and Planning: Department bureau responsible for recommending
transportation policy, plans and programs.
Categorical Exclusion: Actions that do not have significant environmental impacts
under NEPA (40 CFR 1508.4, 23 CFR 771.117).
Code of Federal Regulations: Compilation of the general and permanent rules and
regulations published by federal executive departments and agencies.
Commissioner: State of Connecticut Transportation Commissioner acting through a
duly-authorized representative.
Connecticut Commission on Culture and Tourism: State agency with a mission of
preserving and promoting Connecticut's cultural and tourism assets. The Commission’s
Historic Preservation and Museum Division is the State Historic Preservation Office.
http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?type=simple;c=ecfr;cc=ecfr;rgn=div5;idno=40;q1=1508.4;sid=f229fb23703bd2ed42cddd2a392a3721;view=text;node=40%3A33.0.3.3.9http://edocket.access.gpo.gov/cfr_2011/aprqtr/pdf/23cfr771.117.pdf
- 2 -
Connecticut Council on Environmental Quality: State agency that monitors
environmental trends in Connecticut and recommends improvements to state
environmental policies and advises other agencies on environmental impacts of projects.
Connecticut Environmental Policy Act: Connecticut law establishing the requirement
to identify and evaluate the impacts of proposed state actions which may significantly
affect the environment; codified at Connecticut General Statutes, Sections 22a-1 through
22a-1h, annotated.
Connecticut General Statutes: The official General Statutes of Connecticut, including
the Constitution of the United States, the Amendments to the Constitution of the United
States, the Constitution of the State of Connecticut, and the thirty Amendments to the
Constitution of the State of Connecticut adopted since 1965.
Contract documents: Plans, special provisions and other documents (e.g., notices,
permits) defining the construction requirements and responsibilities of the parties.
Construction contract: Agreement with a private company for construction and based
primarily on the contract documents.
Consultant: Private company contracted to provide project development services for a
project.
Consultant-designed project: Infrastructure project designed exclusively or primarily
by a consultant.
Contract Development: Development phase during which the engineering elements of
the contract documents are completed by refining and augmenting the designer-prepared
materials (e.g., drawings, special provisions).
Contract Development Section: Organizational element of the Department’s Bureau of
Engineering and Construction, Division of Design Services responsible for preparation of
the final construction contract documents.
CORE-CT: Connecticut State government's core financial and administrative
information systems
Cost Estimating Section: Organizational element of the Department’s Bureau of
Engineering and Construction, Division of Design Services responsible for preparation of
engineer’s estimates and bid analysis.
De minimis impact: An impact to a Section 4(f) resource meeting the definition in 23
CFR 774.17.
Department: State of Connecticut Department of Transportation
Design Approval: Documented selection, by an authorized official, of a particular
alternative for implementation after having evaluated transportation considerations,
completed the environmental analysis and fulfilled other requirements. Design approval
http://edocket.access.gpo.gov/cfr_2011/aprqtr/pdf/23cfr774.17.pdfhttp://edocket.access.gpo.gov/cfr_2011/aprqtr/pdf/23cfr774.17.pdf
- 3 -
is required prior to commencement of final design, rights of way acquisition and
construction.
Designer: Entity with primary responsibility for design of the project; may be a
consultant or Department organizational unit. Also known as the Prime Designer.
Division of Bridges and Facilities: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering responsible for facility- and
structures-related infrastructure, including the development of projects consisting
primarily of bridges, facilities and other structures.
Division of Design Services: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering, that provides technical support
services to project development lead units.
Division of Highway Design: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering responsible for developing projects
that are primarily “highway” in character.
Division of Traffic Engineering: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering that manages, directs and
coordinates traffic designs, studies, and investigations, provides design and review
services of maintenance and protection of traffic, traffic signals, signing and pavement
markings and projects with railroad involvement and administers the railroad/highway at-
grade crossing program.
Endangered Species Act: Federal law designed to protect critically imperiled species
from extinction as a consequence of economic growth and development.
Environmental Assessment: This term has two distinct meanings: (1) Public document
prepared under NEPA for projects not classified as a categorical exclusion and the
necessity of preparing an environmental impact statement is not clear. (40 CFR 1508.9,
23 CFR 771.119) (2) Under CEPA (regulations 22a-1a-1), it is the process of
determining if a proposed action may have a significant impact on the environment.
Environmental Classification Document: Document used by a sponsoring agency in
conjunction with the CEPA regulations to determine which of its actions may have
significant impacts.
Environmental Compliance Section: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering, Division of Design Services that
conducts investigations of suspected waste sites in the vicinity of Department projects
and operating facilities and provides technical support and regulatory guidance on
hazardous wastes and regulated contaminated materials.
Environmental Impact Evaluation: Detailed written document concerning the
environmental impacts of a proposed action prepared under CEPA (regulations 22a-1a-
1).
http://www.gpo.gov/fdsys/pkg/CFR-2010-title40-vol1/xml/CFR-2010-title40-vol1-part6.xmlhttp://edocket.access.gpo.gov/cfr_2010/aprqtr/pdf/23cfr771.119.pdfhttp://www.ct.gov/opm/cwp/view.asp?a=2990&q=383208http://www.ct.gov/opm/cwp/view.asp?a=2990&q=383208http://www.ct.gov/opm/cwp/view.asp?a=2990&q=383208
- 4 -
Environmental Impact Statement: Detailed written document concerning the
environmental impacts of a proposed action prepared under NEPA (40 CFR 1508.11, 23
CFR 771.123-5).
FHWA High Cost Project: Project with an estimated cost exceeding $100 million,
funded in part with FHWA-administered funds, and subject to special oversight and
review requirements (e.g., Project Management Plan, Financial Plan).
Final Design: Development phase during which the selected alternative is completely
defined in construction contract documents, a detailed cost estimate is prepared and other
required arrangements (e.g., utility agreements, securing environmental permits and
clearances) are completed.
Finding of No Significant Impact: Documented determination that an action/project
will have no significant environmental impact, prepared under CEPA (regulations 22a-
1a-1) or NEPA (40 CFR 1508.13, 23 CFR 771.121).
Freedom of Information Act: Connecticut laws requiring state and local agencies to
disclose records, with limited exceptions, to any requester; codified at Connecticut
General Statutes, Chapter 14, Sections 1-200 through 1-242.
Green Book: Latest edition of the Policy on Geometric Design of Highways and Streets,
published by the AASHTO.
Highway Capacity Manual: Latest edition of the Highway Capacity Manual, published
by the TRB.
Highway Design Manual: Latest edition of the Highway Design Manual, published by
the Department.
Highway Safety Manual: Latest edition of the Highway Safety Manual, published by the
AASHTO.
Hydraulics and Drainage Section: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering, Division of Engineering Services
that provides specialized engineering, technical support and policy advice on all storm
water and water resource management issues related to the planning, permitting, design,
construction and maintenance of transportation facilities.
Interactive Highway Safety Design Model: Suite of software analysis tools for
evaluating safety and operational effects of geometric design decisions on highways.
Lead Unit: Department organizational unit with principal responsibility for advancing a
particular project.
Long Range Plan: Federally-recognized statewide long-range transportation plan for the
State of Connecticut prepared pursuant to 23 CFR 450.214. The plan is general as
opposed to project-specific.
http://edocket.access.gpo.gov/cfr_2009/julqtr/pdf/40cfr1508.6.pdfhttp://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&tpl=/ecfrbrowse/Title23/23cfr771_main_02.tplhttp://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&tpl=/ecfrbrowse/Title23/23cfr771_main_02.tplhttp://www.fhwa.dot.gov/ipd/project_delivery/resources/financial_plans/guidance.htmhttp://www.fhwa.dot.gov/ipd/project_delivery/resources/financial_plans/guidance.htmhttp://www.ct.gov/opm/cwp/view.asp?a=2990&q=383208http://www.ct.gov/opm/cwp/view.asp?a=2990&q=383208http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=ee417dfb93649fbcbf32b443496f8c94&rgn=div8&view=text&node=40:33.0.3.3.9.0.29.13&idno=40http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&tpl=/ecfrbrowse/Title23/23cfr771_main_02.tplhttp://www.cga.ct.gov/2011/pub/chap014.htmhttp://www.cga.ct.gov/2011/pub/chap014.htmhttp://edocket.access.gpo.gov/cfr_2010/aprqtr/pdf/23cfr450.214.pdf
- 5 -
National Environmental Policy Act: US law establishing national policy promoting
protection and enhancement of the environment; codified at 42 USC 42, Chapter 55.
Office of Construction: Organizational unit of the Department’s Bureau of Engineering
and Construction responsible for the management and coordination of all construction
activities administered by the Construction Districts.
Office of Engineering: Organizational unit of the Department’s Bureau of Engineering
and Construction responsible for the management, direction, and coordination of
engineering activities.
Office of Environmental Planning: Organizational unit of the Department’s Bureau of
Policy and Planning responsible for development and administration of environmental
policy, including preparation and oversight environmental documents required by the
state and federal laws and regulations.
Office of Policy and Management: Multi-function Connecticut State agency
Office of Right of Way: Organizational unit of the Department’s Bureau of Engineering
and Construction responsible for acquiring and managing State property interests with a
primary purpose of transportation.
Permit: Regulatory agency’s written authorization to perform a regulated action.
Planning: Development phase leading to completion of an intermodal Transportation
Plan. Also used to mean the Department’s Bureau of Policy and Planning.
Plans: Drawings developed by the designer whether used in reports, for meeting displays
or incorporation in the contract documents. Also refers to documents prepared to
describe an approach or strategy (e.g., Management Plan, Financial Plan)
Preliminary Design: Development phase during which an alternative is selected for final
design following definition of the underlying problem and identification, refinement and
detailed evaluation of alternatives.
Preliminary Engineering: Term used by the Federal Highway Administration to denote
all the engineering activities leading up to completion of the Plans, Specifications and
Estimate. The studies, preliminary design, final design and contract development phases
are all included within Preliminary Engineering.
Programming: Development phase during which planned projects are prioritized and
available funds are assigned.
Project Memorandum: Memorandum from the Bureau of Engineering and Construction
to the Bureau of Finance and Administration requesting a change in a project’s funding,
scope or schedule. There are two types of Project Memoranda: Recommended Project
Memoranda (RPM) and Project Memoranda, Modification (MOD). A template for this
document is located in the ProjectWise Project Development folder.
http://uscode.house.gov/download/pls/42C55.txtpw:\\ctdot.projectwiseonline.com:CTDOT\Documents\04.0 - Engineering Libraries\10 - Project Development\
- 6 -
Project Memorandum, Modification: Project Memorandum documenting
request/approval for administrative modification of an established project.
Recommended Project Memorandum: Project Memorandum documenting
request/approval for the administrative creation (initiation) of a project. A template for
this document is located in the ProjectWise Project Development folder.
Record of Decision: Concise statement of an agency’s decision following completion of
an environmental impact statement prepared pursuant to NEPA (40 CFR 1506.1, 23 CFR
771.127).
Report of Meeting: Documentation summarizing the date, names and affiliations of
participants, subject (project number and topic) and discussions and conclusions of a
meeting, signed by the persons preparing and approving the report.
SafetyAnalyst: Set of software tools available through the AASHTO, used by state and
local highway agencies for highway safety management.
Scope of Work: Statement of work, activities and work products associated with a
consultant agreement.
Section 4(f): Section 4(f) of the Department of Transportation (DOT) Act of 1966,
codified at 23 USC 138.
Section 106: Section 106 of the National Historic Preservation Act of 1966 (16 USC 470
et seq.).
Selected Alternative: Alternative selected for final design after having been classified
and evaluated in conformance with CEPA/NEPA.
Soils and Foundations Section: Organizational unit of the Department’s Bureau of
Engineering and Construction, Office of Engineering, Division of Engineering Services
that provides design and review services on matters related to soil, rock, and foundations
for the planning, design, construction, and maintenance of roads, bridges, and
transportation facilities.
Special Provisions: Specifications applicable to an individual project prepared by the
designer, utility owner, municipality or another entity.
Sponsoring Agency: Agency responsible for the preparation of environmental
classification documents, environmental impact evaluations, and findings of no
significant impact required by CEPA.
State Historic Preservation Officer: Entity designated by the governor (of each state)
to administer the national historic preservation program at the State level, review
National Register of Historic Places nominations, maintain data on historic properties that
have been identified but not yet nominated, and consult with federal agencies during
Section 106 review.
pw:\\ctdot.projectwiseonline.com:CTDOT\Documents\04.0 - Engineering Libraries\10 - Project Development\http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?type=simple;c=ecfr;cc=ecfr;rgn=div5;idno=40;q1=1506.1;sid=4872a17ef5e0c81e6ac2d93e833ee07f;view=text;node=40%3A33.0.3.3.7http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=0607a4689b5e18cdf77686b9616d404a&rgn=div8&view=text&node=23:1.0.1.8.43.0.1.14&idno=23http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=0607a4689b5e18cdf77686b9616d404a&rgn=div8&view=text&node=23:1.0.1.8.43.0.1.14&idno=23http://frwebgate.access.gpo.gov/cgi-bin/getdoc.cgi?dbname=browse_usc&docid=Cite:+23USC138http://www.achp.gov/nhpa.htmlhttp://www.achp.gov/nhpa.html
- 7 -
State Implementation Plan: State-level plan for complying with the federal Clean Air
Act, consisting of narrative, rules, technical documentation, and agreements that
Connecticut will employ to meet the requirements of the law.
State-designed project: Infrastructure project designed exclusively or primarily by state
forces, with little or limited support by a consulting engineer.
Statewide Bicycle and Pedestrian Transportation Plan: Document directing the
Department’s policy development and initiatives to advance programs and projects to
accommodate non-motorized transportation (bicycling, walking, and horse riding).
Strategic Highway Safety Plan: The statewide-coordinated safety plan that provides a
comprehensive framework for reducing highway fatalities and serious injuries on all
public roads in Connecticut.
Studies: Optional project development phase, between project initiation and preliminary
design, during which the information on the transportation problem is developed, the
range of alternatives is narrowed and remaining alternatives are analyzed.
Suggested List of Surveillance Study Sites: List of locations with the greatest promise
of accident reduction, as identified by the Department’s Division of Systems Information
using the Rate-Number Quality Control method. The information is not subject to
disclosure under the FOIA.
Traffic Accident Surveillance Report: Compilation of comparative accident statistics
developed by the Department’s Division of Systems Information. This information is not
subject to disclosure under the FOIA.
Traffic Engineering project: Project for which the Division of Traffic Engineering is
the lead unit.
Trns•port: Suite of software modules that supports the Department’s delivery of
construction projects through functionality in the areas of cost estimation, proposal
development, bidding, contract award, construction contract administration and materials
management.
United States Code: Compilation of the general and permanent federal laws.
Utility: Any public service company and their facilities.
Utilities Section: Organizational unit of the Department’s Bureau of Engineering and
Construction, Office of Engineering, Division of Engineering Services that coordinates
the relocation of public utilities with the construction or reconstruction of transportation
facilities.
1.1.2 Abbreviations and Acronyms The following abbreviations and acronyms are used in this Guide:
AASHTO: American Association of State Highway and Transportation Officials
http://en.wikipedia.org/wiki/Clean_Air_Acthttp://en.wikipedia.org/wiki/Clean_Air_Acthttp://en.wikipedia.org/wiki/Law_of_the_United_States#Federal_law
- 8 -
ACHP: Advisory Council on Historic Preservation
ADA: Americans with Disabilities Act
ADT: Average Daily Traffic
ADV: Advertising date (construction contract)
BFO: Burden, Fringe and Overhead
BID: Bid opening date (construction contract)
CAM: Coastal Area Management
CATX: Categorical Exclusion
CCEQ: Connecticut Council on Environmental Quality
CCT: Commission on Culture and Tourism (Connecticut)
CEPA: Connecticut Environmental Policy Act
CFR: Code of Federal Regulations
CGS: Connecticut General Statutes
CN: Construction
CSD/S: Context-Sensitive Design/Solutions
CTDOT: Connecticut Department of Transportation
DBE: Disadvantaged Business Enterprise
DCD: Design Completion Date
DDHV: Directional Design Hourly Volume
DECD: Department of Economic and Community Development (Connecticut)
DEIS: Draft Environmental Impact Statement
DEP: Department of Environmental Protection (Connecticut)
DHV: Design Hourly Volume
DOA: Department of Agriculture (US)
- 9 -
DOI: Department of Interior (US)
DOT: Department of Transportation
DPH: Department of Public Health (Connecticut)
EA: Environmental Assessment
ECD: Environmental Classification Document
EIE: Environmental Impact Evaluation
EIS: Environmental Impact Statement
EPA: Environmental Protection Agency (US)
ESA: Endangered Species Act
FAA: Federal Aviation Administration (US)
FD: Final Design
FDP: Final Design Plans
FHWA: Federal Highway Administration
FOIA: Freedom of Information Act
FONSI: Finding of No Significant Impact
FPFR: Final Plans for Review
FTA: Federal Transit Administration
FWS: Fish and Wildlife Service (US)
HCM: Highway Capacity Manual
HDM: Highway Design Manual
HSIP: Highway Safety Improvement Program
HSM: Highway Safety Manual
HUD: Department of Housing and Urban Development (US)
IHS: Interstate Highway System
IHSDM: Interactive Highway Safety Design Model
- 10 -
ISTEA: Intermodal Surface Transportation Efficiency Act of 1991
ITS: Intelligent Transportation System
LRP: Long Range Plan
MPO: Metropolitan Planning Organization
MOA: Memorandum of Agreement
MOD: Project Memorandum, Modification
MOE: Measures of Effectiveness
MOU: Memorandum of Understanding
MPO: Metropolitan Planning Organization
MS4: Municipal Separate Storm Sewer System
MVMT: Million Vehicle Miles of Travel
NAAQS: National Ambient Air Quality Standards
NEPA: National Environmental Policy Act
NHPA: National Historic Preservation Act of 1966 (16 USC 470)
NHS: National Highway System
NPDES: National Pollutant Discharge Elimination System
NRHP: National Register of Historic Places
NTP: Notice to Proceed
OPM: Office of Policy and Management
PD: Preliminary Design
PIP: Public Involvement Plan
PIGM: Public Involvement Guidance Manual
PM: Project Manager
PS&E: Plans, Specifications and Estimates
- 11 -
ROD: Record of Decision
ROM: Report of Meeting
ROW: Right of Way
RPO: Regional Planning Organization
RPM: Recommended Project Memorandum
R/W: Right of Way
SBE: Small Business Enterprise
Section 106: Section 106 of the National Historic Preservation Act of 1966
Section 401: Section 401 of the Clean Water Act
Section 404: Section 404 of the Clean Water Act
SCEL: Stream Channel Encroachment Line
SEE: Social, Economic, and Environmental
SEP: Subsurface Exploration Program
SFD: Semi-Final Design
SHPO: State Historic Preservation Officer
SHSP: Strategic Highway Safety Plan
SIP: State Implementation Plan
SLOSSS: Suggested List of Surveillance Study Sites
SPN: State Project Number
STIP: Statewide Transportation Improvement Program
TASR: Traffic Accident Surveillance Report
TIP: Transportation Improvement Program
TRB: Transportation Research Board
US: United States
USACOE: United States Army Corps of Engineers
- 12 -
USC: US Code
USCG: US Coast Guard
USDOT: US Department of Transportation
US EPA: US Environmental Protection Agency (same as EPA)
VE: Value Engineering
1.2 Introduction A “project” is a transportation improvement or a package of improvements identified in
Connecticut’s Long Range Plan for implementation. The project description, as included
in the Long Range Plan, is often very general. “Project development” is the process of
transforming a general need to a specific and well-defined solution, often involving
infrastructure construction. This process is conceptually represented by Exhibit 1.
Exhibit 1. Project development process concept.
The Department undertakes projects with a wide variety of scopes and complexities.
Even moderately complex projects involve a multitude of decisions and activities
involving the project team, Department functional units (e.g., Utility Section, Office of
Single, well-defined
outcome
Problems, potential solutions
Decision
Screens
- 13 -
Environment Planning), joint-lead and cooperating agencies, and other stakeholders (e.g.,
municipalities, planning agencies, property owners, regulatory agencies, utility owners).
Recognizing these complexities and challenges is the first step in mapping out a
successful project delivery plan.
At the dawn of the Interstate Highway era, project development consisted almost entirely
of engineering design. Much has changed. As our transportation network has matured,
public expectations have changed. Numerous State and federal laws have been enacted
directly affecting how projects are developed. Today, project decisions take into account
a complex and evolving array of environmental, funding and technical factors. The
Department has published references (e.g., policies, manuals) on many individual
subjects (e.g., drainage and hydraulics, geometric design, utility coordination). This
Guide does not alter or supersede any Department-issued policy or manual. This Guide
covers the entire project development process, tying together many individual topics,
some of which are covered by separate guidance.
1.2.1 Purpose, Coverage and Structure of Guide This Guide is written primarily for Department personnel and consultants involved in
project development. It outlines typical activities leading to the completion of
construction contract documents for Department capital projects. The Guide covers
administrative, technical and project management topics and consists of four sections,
summarized below:
1. Terminology and abbreviations used within the Guide are defined. Key concepts are summarized and a project classification system is established.
2. This section included guidance on engineering cost estimation and detailed project development guidance. Typical activity patterns for common project
types are provided along with narrative guidance for each activity.
3. This section describes typical products developed during project development, including the final deliverables (contract documents) and
interim milestone submissions.
4. This section summarizes typical Department and FHWA approvals. It identifies required approvals in relation to development activities (Section 2)
and authorized approving officials. It does not include approvals made by
other agencies (e.g., permits).
This Guide is used most-efficiently in electronic format through a Web browser, which
enables the hypertext links that connect the Guide to primary reference materials. It is
also useable in print (hard copy).
1.2.2 Relationship to other Publications This Guide relies extensively on other publications, mostly Department Manuals and
procedures. The referenced publications are identified in Exhibit 2 and provide detailed
information within specific topical areas but often do not relate technical activities within
one disciplines to those in another or to the overall development process. As previously
noted, this Guide ties together numerous technical, coordination and administrative
activities.
- 14 -
This Guide does not establish any new engineering or technical criteria nor does it
supersede any technical information within the publications listed in Exhibit 2.
Exhibit 2. Department project development references.
1.3 Project Development Principles and Concepts This section outlines the principles and concepts that serve as the foundation for various
policies, processes and procedures. These tenets are woven into the detailed guidance
found in Section 2. Understanding the concepts makes it easier to follow the procedures
and adapt them when appropriate. Procedures change frequently to reflect
organizational, personnel, information technology and business process evolution.
Further, detailed guidance cannot address every situation that may be encountered during
project development. There will always be situations for which explicit detailed
guidance is not available. When faced with this circumstance, project teams should adapt
the enduring principles and basic concepts, along with their collective experience.
Title or Description Date
Bridge Design Manual 2003
Connecticut Bicycle and Pedestrian Transportation Plan 2009
Constructability Review Program 2009
Construction Contract Bidding & Award Manual 2010
Consultant Administration & Project Development Manual 2008
Digital Design Environment Guide 2007
Consultant Selection, Negotiations and Contract Monitoring
Procedures for Municipally-Administered Projects
2011
Digital Project Development Manual 2011
Drainage Manual 2000
Engineering Policy Statements Various
Geotechnical Engineering Manual 2005
Highway Design Manual 2003
Information Guide for Right of Way Acquisition Activities 2007
Location Survey Manual 1997
Implementation of Policy Ex.O-29 (permitting) – in development TBD
Policies and Procedures for Property Maps 2000
Policy and Procedures for New or Revised Interstate Access Approval 1998
Preliminary Cost Estimating Guidelines Annual
Professional Services, Consultant Selection Procedures Manual 2010
Public Involvement Guidance Manual 2009
Public Involvement Procedures 2009
Public Service Facility Policy and Procedures for Highways 2008
Traffic Control Signal Design Manual 2009
Utility Accommodation Manual 2009
Value Engineering Program 2009
http://www.ct.gov/dot/lib/dot/documents/dpublications/bridge/bdm.pdfhttp://www.ct.gov/dot/cwp/view.asp?a=1390&q=259656http://www.ct.gov/dot/lib/dot/documents/dqa_qc/cru/constructibility_procedure_pdf_format_8-09.pdfhttp://www.ct.gov/dot/lib/dot/Documents/dcontracts/construction.pdfhttp://www.ct.gov/dot/lib/dot/documents/dconsultdesign/manual/Consultant_Administration__and__Project_Development_Manual.pdfhttp://www.ct.gov/dot/lib/dot/documents/deng/CTDOT_DDE_Guide.pdfhttp://www.ct.gov/dot/lib/dot/documents/dhighwaydesign/Consultant_Selection_Guidelines_December_2011.pdfhttp://www.ct.gov/dot/lib/dot/documents/dhighwaydesign/Consultant_Selection_Guidelines_December_2011.pdfhttp://www.ct.gov/dot/lib/dot/documents/aec/Digital_Project_Development.pdfhttp://www.ct.gov/dot/cwp/view.asp?a=3200&q=260116&dotPNavCtr=|http://dot.si.ct.gov/dotsi/cwp/view.asp?a=3568&q=449746http://www.ct.gov/dot/lib/dot/documents/dpublications/gtman_3-05.pdfhttp://www.ct.gov/dot/lib/dot/documents/dpublications/highway/cover.pdfhttp://www.ct.gov/dot/lib/dot/documents/dcsurvey/LocationManual.pdfhttp://www.ct.gov/dot/lib/dot/documents/dcsurvey/PropertyMaps.pdfhttp://www.ct.gov/dot/lib/dot/documents/dcontractdev/ESTIMATING_ENGLISH.pdfhttp://www.ct.gov/dot/lib/dot/documents/dconsultantoffice/Procedures_Manual__FINAL_Jan_2010_.pdfhttp://www.ct.gov/dot/lib/dot/documents/dpolicy/pigm_final_11_16_09.pdfhttp://www.ct.gov/dot/lib/dot/documents/dplans/PIP.pdfhttp://www.ct.gov/dot/lib/dot/documents/dutilities/UtilityPolicyProcedures.pdfhttp://www.ct.gov/dot/lib/dot/documents/dtrafficdesign/sigmanapproved2009.pdfhttp://www.ct.gov/dot/lib/dot/documents/dutilities/ACCOMODATION.pdfhttp://www.ct.gov/dot/lib/dot/documents/dqa_qc/cru/ve_doc_nov_09.pdf
- 15 -
The Department is a mission-oriented executive agency with numerous responsibilities,
none being more important than the development and improvement of the State’s
intermodal transportation network. Transportation systems are critical to a vibrant
economy and social interaction at the local, regional, national and global levels. Public
interest and expectations in transportation are justifiably high. As users and principal
sponsor of transportation systems, the public is the Department’s customer.
In project development, results matter. So does process. Project development must
reflect the public will and prevailing values on both counts: results and process. This
section describes how to get the job done, consistent with the Department’s
responsibilities as a State agency.
1.3.1 Principles Although this Guide provides procedures for many specific activities, no set of
instructions can be comprehensive. In some situations, the path forward is not clear.
Decisions involve numerous factors. Uniform, unequivocal rules (“always do A” or
“never do B”) do not exist. The project team and Department managers will be called
upon to adapt, innovate and exercise judgment. The following principles, which are
embedded in many policies, should guide project development decisions.
Deliberative: Decisions should be made thoughtfully and, when appropriate, after
consultation. Decisions made in haste or without pertinent information are often
revisited and reversed, negating substantial resources and time. Key decisions
should be documented in project records (e.g., correspondence, ROMs).
Inclusive: Actively seek and consider a broad range of factors and perspectives.
Objective: Utilize information and techniques that are free of bias, distortion and
prejudice. Use quantitative measures when possible; never describe complex
conditions with vague, simple terms (e.g., good, poor). When information
sources are in conflict, weigh the authority and basis (e.g., technical merit) of
each.
Proportional: The scale of the solution should correspond to the problem.
Significant problems warrant costs and impacts that may not be justified for lesser
problems. This principle also applies to process. A significant problem (e.g.,
persistently high crash rate) may warrant very rigorous study. Conversely, no
task or activity should be made more complicated than is needed.
Responsive: Recognize, characterize and consider the varying levels of
remediation or resolution that different actions (e.g., project alternatives) provide
to the defined problem or concern. When viewed objectively, some commonly
perceived solutions offer very little remediation.
Transparent: All interested persons should have access to, and visibility of, the
process. The decision process and decisions should be an open book.
These principles are utilized throughout the project development process.
- 16 -
1.3.2 Systematic Decision Making Project development is a systematic method of selecting and implementing the optimal
solution to a transportation problem. As noted in the Context Sensitive Design/solutions
(CSD/S) discussion that follows (Section 1.3.3), solutions reflect consideration of
technical and non-technical factors. .
When decisions rely too heavily on historical practice, both threats and opportunities are
overlooked. Use progressive technical and technological methods within a deliberative,
objective and rigorous process. This section outlines a four-step problem solving process
that is widely used in transportation and other fields.
1. Define the Problem Projects are initiated to solve problems. However, at the outset, the problem may not be
clearly understood. The starting point for all technical activities is to define the problem
using objective methods and characteristics. This step is critical. Ultimately, each
potential alternative will be assessed on the basis of its responsiveness to the stated needs.
Without a clear definition of the problem, subsequent evaluations and decisions can be
arbitrary.
The project development team usually has some information about the nature of the
perceived problem at the time of initiation. The type, format and support for this
information vary widely. In all cases, the information should be scrutinized to determine
its adequacy and reliability for further use. The following are examples (but not a
complete list) of information that is generally considered reliable:
Objective, current data from Department inventory and asset management systems (e.g., pavement management),
Objective, current data from Department operational data (e.g., traffic and safety records),
Recent surveys (e.g., topographic, wetland) conducted and certified by licensed professionals,
Objective analyses (e.g., demand projections) from recent studies conducted or managed by the Department.
Other information should be reviewed on a case-by-case basis to assess its usefulness.
In some cases, the problem can be adequately defined at initiation. Problem statements
should:
Concisely identify/describe a patently undesirable condition,
Be easily understandable by the general public (free of arcane terms and agency jargon),
Be based on a rigorous technical evaluation,
Not identify a solution, explicitly or implicitly.
Exhibit 3 provides examples of acceptable and unacceptable problem statements.
- 17 -
Exhibit 3. Comparison of example acceptable/unacceptable needs statements.
When an acceptable and supportable problem definition has been provided or can be
formulated at project initiation, this step requires no further work and is concluded. In
the absence of adequate pre-initiation support, a technical plan should be prepared to
adequately define the problem.
There is no set formula for conducting problem/needs studies. The scope and depth of
studies should be responsive and proportional to the problem location and description.
The following are examples of information that is collected and developed through
analysis in connection with problem statement technical studies.
Existing traffic conditions and performance o Functional classification, o Traffic conditions (volumes, turning movements, levels of service), o Mobility (levels of service, delay, travel times), o Bicycle and pedestrian accommodation, o Accessibility for the disabled, o Public transportation facilities and service, o Accident history.
Existing infrastructure conditions o Pavements, o Structures (bridges, walls, sign supports, etc.), o Traffic control devices (pavement markings, signs, signals), o Barriers and safety hardware.
Plans/Requirements o Long Range Plan, o Statewide Transportation Improvement Program, o Strategic Highway Safety Plan, o Statewide Bicycle And Pedestrian Transportation Plan, o Corridor plans, o Legislative mandates.
Appropriate/acceptable Poor/unacceptable
The existing bridge is structurally deficient. Replacement bridge needed.
The average travel time along Route 1, between the
intersections at Routes 2 and 22, is 4 minutes longer
during peak periods compared to off peak.
Route 1 capacity is
inadequate.
Average delay on all uncontrolled approaches
exceeds 3 minutes during AM and PM peaks.
A traffic signal at the
intersection is needed.
The actual crash rate at the intersection is
approximately double the critical accident rate.
A left turn lane is needed.
- 18 -
Projected traffic conditions and performance o Traffic conditions (volumes, turning movements, levels of service), o Mobility (levels of service, delay, travel times), o Accidents/safety.
Given the potential breadth of the subjects involved, the project development team may
not have direct access to all/key relevant information or the resources to perform some
analysis. Department functional units and external organizations (e.g., MPOs,
municipalities) may have information and other resources readily available and should be
contacted.
In planning and conducting technical studies, the project team should bear in mind the
relationship of these studies to future evaluations. As a subsequent step, the
responsiveness of each alternative will be assessed. The approach used to define
problems, or one similar, should be used to assess solutions. Therefore, study methods
that work for both existing and proposed conditions are desirable.
Very often, technical studies reveal several problems at a potential project location. In
such cases, the project team will determine which problem(s) should be identified as the
underlying project purpose. There is no simple answer but the following guidance is
provided:
The primary problem is the one most closely related to the general description provided in the initiation and posing the most pressing public interest. The
primary problem at a location should always be defined,
The project’s merit (benefit) is not based on the number of identified problems,
There is no preferred number of problems; a single or several identified problems for the same project are equally acceptable,
A condition should be identified and included within the problem definition if it is of critical importance; meaning:
o it is so troublesome (e.g., hazardous, disruptive) that it would justify a separate project, or
o remediation is a necessary outcome for a project at the location;
Conditions should not be identified and defined as a problem simply to accommodate a suggestion (as a “courtesy”) without meeting the test of
critical importance,
Conditions that do not rise to the level of a defined problem/need are not unimportant and should not be disregarded. When alternatives are
evaluated, all benefits (including improvements not identified in the
problem statement) of each alternative will be consideration as part of the
selection.
Problem definitions should be developed through an objective and deliberative process.
However, the initial results of this step (problem definition with support) are not fixed or
unalterable. With the progression of time and circumstances, additional and updated
information may become available. When warranted by circumstances, the project
- 19 -
manager may determine that the problem definition should be revisited and, if
appropriate, revised.
Stakeholders should have ample opportunity to participate in problem identification and
the project PIP should address public participation in this step of project development.
For some minor projects (e.g., resurfacing), public participation may be accomplished on
a program-wide basis (e.g., TIP/STIP development).
The information in this Guide is not sufficient for projects requiring an EIS, which
include a Purpose and Need section. When preparing an EIS, reference the applicable
law, regulations and reference guides.
2. Identify and Evaluate Alternatives
An “ideal” solution is one in which every evaluation factor favors the same alternative.
In real-world project development, ideal alternatives are rare. Most projects involve
tradeoffs, wherein a desired result (e.g., increased safety) can only be obtained if less-
desirable effects (e.g., cost, negative impacts) are also incurred. The overriding goal of
the evaluation process is to enable a “well informed, well considered” decision. To
accomplish this, a decision maker needs comprehensive and unbiased information on the
available choices (range of reasonable alternatives). An alternative selection based on
inadequate information is inherently flawed. When the record is corrected, the selection
decision is called into question and may be reversed.
Potential solutions originate at many sources, including asset and performance
management systems, planning and municipal organizations, pre-design studies, public
comments and investigations by the project development team. The range of input and
diversity of candidate alternatives depends on the scope and complexity of the defined
problem. Early in the process, alternatives may evolve by combining the positive
features of different concepts and through refinement. The project development process
should be very receptive to input from all sources. The project PIP should address public
involvement opportunities in this phase. At the outset, the number, type and range of
alternatives should not be constrained. Failing to consider a potentially viable solution is
a much greater risk than considering a poor candidate.
The “No Build” (also known as No Action) alternative is the condition that will exist if
none of the Build alternatives are implemented. Evaluation of the No Build alternative
provides useful perspective for alternatives comparison. NEPA documents (EAs, EISs)
always include evaluation of the No Build and its inclusion is often helpful for
evaluations not directly related to NEPA.
Time and funds are required to evaluate each alternative. These expenditures are a
worthy investment when the alternative is potentially viable. However, no public interest
is served by evaluating alternatives that are not reasonable. There are no minimum or
maximum numbers of alternatives that require evaluation. Prior to commencing detailed
evaluation, the viability of each candidate alternative is assessed, often on a qualitative
basis. Evaluation methods employed at this stage are typically less rigorous than those
used for detailed design and analysis. Unreasonable alternatives do not require detailed
evaluation and should be dismissed from consideration (“screened out”). For reasons
explained previously, the No Build is retained and fully evaluated.
- 20 -
For some projects (e.g., less-complicated, low-impact), a single, consensus, best-choice
alternative may emerge from the refinement processes. In other cases, several unique
alternatives are identified, each with unique benefits, impacts and advocacies.
The approach and techniques used for detailed evaluation should be objective and include
all critical factors. Although the specific factors associated with a particular project vary
widely, they tend to fall within three general categories. One category of measures is
related to how effectively the alternative responds to the defined problem and other
desirable outcomes. A second category identifies social, environmental and economic
impacts. Costs, both initial and recurring, are a third category. An example of specific
factors within these three categories follows:
Responsiveness/Effectiveness o Select measures of effectiveness (MOEs) based on problem definition,
such as:
Accessibility, Crash frequency and severity, Emissions, Ride quality, Ridership, Travel time.
o Other benefits (not counted elsewhere)
Impacts (positive and negative) o Community/social, o Cultural resource, o Economic, o Natural resources, o Temporary impacts, o Right-of-way, property.
Cost o Initial (construction, purchase), o Maintenance, o Operating.
The measures and methods used to estimate responsiveness, impacts and cost should be
consistent with professional practices for the relevant technical disciplines (e.g.,
environmental science, hydraulics, structural engineering, traffic).
- 21 -
Evaluation documentation varies with project scale, impacts, cost and public interest. For
minor projects, documentation is modest. A much more rigorous process and
comprehensive documentation is needed for complex projects since they involve more
variables, stakeholders, development time, collaborative decision making and generally
greater risk. An enduring record of key decisions and relevant background information is
needed. Even for minor projects, summary documentation of the evaluation should be
included in the project file. The documentation should summarize how the evaluations
were conducted and the results. Exhibit 4 is an example of a summary presentation
format that can be easily adapted to most projects.
3. Select an Alternative
After the evaluation is complete and information is available to the decision maker, a
single alternative is selected from among those evaluated. The selection doesn’t take
place at a single moment in time. Following discussion within the project team, a
meeting should be scheduled for the purpose of presenting a summary of the evaluation
and selecting an alternative. Based on the specific project factors (e.g., cost, complexity,
controversy, range of alternatives), the project manager will determine the appropriate
level of management representation. A summary of the evaluation should be circulated
in advance of the meeting. A summary of the meeting discussion and conclusions,
including the tentative selection of an alternative, should be documented in the file.
Design Approval is the conclusive and documented selection of an alternative. In
essence, this approval is the point where resources can be committed to implementing the
selected design concept.
4. Refine Selected Alternative Under this activity, the detailed information required for implementation of the selected
alternative is developed. Typical activities include refinement of geometry, structural
design, traffic control design, identification and acquisition of required property interests,
utility and railroad coordination, preparation of permit applications and completion of
construction contract documents.
The project PIP should address public involvement opportunities in this phase.
In Section 2 of this Guide, the concepts outlined in this section are translated to
Department processes and procedures. The general decision-making approach described
here applies to every project. However, the range of considerations, intensity of effort
and timing of individual activities vary substantially by project and circumstance.
Exhibit 4. Example evaluation matrix.
Transportation
Responsiveness Impacts Cost
Factor
Safety
Mobility
Wetlan
d
Noise
Real p
roperty
Histo
ric
Eco
nom
ic
Constru
ction
Main
tenan
ce
Measure
Alternative
Expected
num
ber o
f serious crash
es, annually
Red
uctio
n in
averag
e travel tim
e (min
utes)
Wetlan
d area d
isplaced
(acres)
Impacted
noise recep
tors
Partial p
roperty
acquisitio
ns
Total resid
ential acq
uisitio
ns &
relocatio
ns
Com
mercial &
industrial relo
cations
Histo
ric pro
perties affected
Em
plo
ym
ent d
islocatio
n (fu
ll time p
ositio
ns)
All in
clusiv
e, constru
ction, u
tilities, R/W
($ m
illion
)
Dem
and an
d ro
utin
e ($th
ousan
d/an
nually
)
No Build 2.3 0.0 0.0 3 0 0 0 0 0 0 4.2
Alternative A 1.6 1.2 0.08 6 3 1 1 0 3 3.6 0.3
Alternative B 1.8 1.1 0.12 4 2 2 0 0 0 2.5 0.5
- 22 -
23
1.3.3 Context Sensitive Design/Solutions Context Sensitive Design/Solutions (CSD/S) is an approach to transportation decision-
making and design that considers the communities and land (i.e., context) that streets
and highways pass through. While there is a general consistency in how various
agencies define and apply CSD/S, there is also some variation. The following are the
Department’s CSD/S objectives:
The project purpose and needs are forged early in the process with ample opportunity for stakeholder input and dialogue.
The resources (e.g., time, budget) of all involved parties are used efficiently and effectively.
The selected alternative satisfies the defined purpose and needs.
The project improves or maintains user and community safety.
The project is in harmony with the community and preserves environmental, scenic, aesthetic, historic, and natural resource values of the area.
Attentive design and construction provisions minimize community disruption.
The completed project is seen as an enduring community enhancement.
“Context sensitive” is not a unique type of project or approach; it is the Department’s
routine mode of project development. While some projects present greater challenges
and generate more public interest than others, the objectives are the same for all
projects.
1.3.4 Public Involvement and Public Information It is Department policy to engage in early, active and continuous public involvement
efforts throughout all phases of project planning, development, implementation and
operation. The Department’s public involvement requirements and guidance for various
development phases (e.g., planning, programming, design) are outlined in the Public
Involvement Guidance Manual and Public Involvement Procedures. These documents
are the primary references for public involvement activities. Several key points are
summarized here as an introduction to, not a substitute for, the primary reference
publications.
The “public” refers to the very broad range of people and organizations with an interest
in the project. These people and organizations are often referred to as “stakeholders”,
which may include:
Federal officials,
Other state agencies (e.g., DEP or SHPO),
Local elected officials,
Town engineers/planners,
Regional officials,
http://www.ct.gov/dot/lib/dot/documents/dpolicy/pigm_final_11_16_09.pdfhttp://www.ct.gov/dot/lib/dot/documents/dpolicy/pigm_final_11_16_09.pdfhttp://www.ct.gov/dot/lib/dot/documents/dplans/PIP.pdf
24
Special interest or advocacy groups (e.g., Sierra Club, Commuter Rail Council, etc.),
Ad hoc groups created for a specific project,
Abutting or nearby property owners,
Civic associations,
Business or economic development interests,
Other interested parties,
State legislators and congressional delegation.
In addition to satisfying legal requirements, public involvement is the principal
mechanism for identifying stakeholders and their concerns. Early coordination improves
the opportunity for meaningful consideration of issues and their efficient resolution.
Encountering a significant concern late in the process is inherently problematic since
modifications are more disruptive and expensive. To avoid this situation, initiate public
outreach at the onset of the development of any proposed action, prior to conducting
detailed analysis.
The extent of public outreach for each proposed action depends on the project’s scope,
location and other factors. A public involvement plan (PIP) should be developed and
documented for each project in consideration of (minimum) requirements and needs.
Again, Department publications outline relevant policies and guidance.
1.4 Environmental Considerations and Requirements
The protection and enhancement of environmental resources is a global pursuit. In the
US, public support is reflected in an extensive body of State and federal laws,
regulations, executive orders and policies that define our environmental goals and
required actions. This section of the Guide introduces several of the more important and
frequently occurring requirements. Exhibit 5 identifies environmental-related laws and
regulations that are routinely encountered during project development, along with several
information sources.
Environmental regulation of transportation projects is a very complicated subject. It is
not practical to summarize or even identify all of the possible requirements under State
and federal environmental laws. This section provides key highlights. Similarly, Exhibit
5 is sample rather than a comprehensive list of environmental requirements and guidance.
The list of potentially relevant laws, regulations and executive orders is too extensive for
inclusion in this Guide.
25
Exhibit 5. Common environmental laws, regulations and references.
Title or Description Citation S
tate
Environmental Protection CGS 22a
Water Resources, Flood and Erosion Control CGS 25
Endangered Species CGS 26-303
Air Quality Standards regulation 22a-174-1
Connecticut Stormwater Quality Manual
Implementation of Policy Ex.O-29
OEP Office Processes and Procedures Manual
Fed
eral
National Environmental Policy Act 42 USC 4321
Section 4(f) 23 USC 138
National Historic Preservation Act 16 USC 470 et seq
Endangered Species Act 16 USC 1531 - 1544
Clean Water Act, Section 401 33 USC 1341
Clean Water Act, Section 404 33 USC 1344
Coastal Zone Management Act 16 USC 1451 et seq
FAA NEPA Implementing Instructions Order 5050.4B
FHWA environmental regulation 23 CFR 771
FHWA Section 4(f) regulation 23 CFR 774
FHWA noise regulation 23 CFR 772
FTA environmental regulation 49 CFR 662
NHPA Section 106 Regulations 36 CFR 800
FHWA Environmental Review Toolkit
1.4.1 Overview The term “environment” generally refers to the natural and physical surroundings. In
some cases, economic and social conditions and setting are also included within the
meaning of environment. The following are generally considered elements of the human
environment:
Air quality,
Aquatic resources,
Contaminated and hazardous material,
Cultural (e.g., archeological, historic) resources,
Fauna (i.e., animal life),
Flora (i.e., plant life),
Land use,
Sound quality (i.e., noise), and
Visual/viewshed.
http://www.cga.ct.gov/2011/pub/title22a.htmhttp://www.cga.ct.gov/2011/pub/title22a.htmhttp://www.cga.ct.gov/2011/pub/title25.htmhttp://www.cga.ct.gov/2011/pub/title25.htmhttp://www.cga.ct.gov/2011/pub/chap495.htmhttp://www.cga.ct.gov/2011/pub/chap495.htmhttp://www.ct.gov/dep/lib/dep/air/regulations/mainregs/sec1.pdfhttp://www.ct.gov/dep/lib/dep/air/regulations/mainregs/sec1.pdfhttp://ct.gov/dep/cwp/view.asp?a=2721&q=325704http://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc42.pt2.wais&start=5750013&SIZE=5655&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc42.pt2.wais&start=5750013&SIZE=5655&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc23.wais&start=1121859&SIZE=11848&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc23.wais&start=1121859&SIZE=11848&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=6106929&SIZE=65742&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=6106929&SIZE=65742&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=12573309&SIZE=6543&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=12573309&SIZE=6543&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc33.wais&start=3290888&SIZE=10968&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc33.wais&start=3290888&SIZE=10968&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc33.wais&start=3350146&SIZE=36380&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc33.wais&start=3350146&SIZE=36380&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=12346734&SIZE=35750&TYPE=PDFhttp://frwebgate.access.gpo.gov/cgi-bin/usc.cgi?ACTION=RETRIEVE&FILE=$$xa$$busc16.wais&start=12346734&SIZE=35750&TYPE=PDFhttp://www.faa.gov/airports/resources/publications/orders/environmental_5050_4http://www.faa.gov/airports/resources/publications/orders/environmental_5050_4http://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr771_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr771_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr774_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr774_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr772_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/23cfr772_10.htmlhttp://www.fta.dot.gov/laws/leg_reg_821.htmlhttp://www.fta.dot.gov/laws/leg_reg_821.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/36cfr800_10.htmlhttp://www.access.gpo.gov/nara/cfr/waisidx_10/36cfr800_10.htmlhttp://www.environment.fhwa.dot.gov/index.asp
26
The Department has a responsibility to consider the effects of its actions on the
environment. All projects require an environmental review. The extent of analysis and
documentation depends primarily on the value of the impacted resource(s) and intensity
of the impact. Extensive analysis and documentation of avoidance and mitigation are
required when a severe impact to a high-value resource is proposed. Limited
documentation is required for projects with no or minor environmental impacts.
The core responsibility of the Department under various laws and regulations is to avoid
environmental impacts whenever practicable. The following four-step process is a
generally accepted approach to developing transportation projects in relation to
environmental resources:
Identification: Develop information on the location, limits and characteristics of
environmental resources. Begin with research of secondary sources (e.g., archival
data bases and mapping), including online materials. Conduct location/project
investigations as the range of alternatives narrows.
Avoidance: In developing alternatives, avoid impacts where practicable. In
assessing practicality, consider the value of the resource and impact/avoidance
consequences.
Impact assessment: When avoidance is not practicable, assess and characterize
the effect using accepted techniques and protocols corresponding to the
resource(s).
Mitigation: Identify and evaluate measures that reduce the negative effects.
Mitigation measures vary by the type and value of the impacted resource.
For some projects, several iterations of this sequence may be necessary. For example,
some resources (i.e., located below ground) are difficult to identify and may be
discovered only after the completion of initial investigations. Additionally, impacts and
avoidance are related to the configuration of specific alternatives. As alternatives evolve,
the impact area and affected resources may also change, resulting in additional review.
Environmental reviews take place at several “levels”. A high-level review is one that
considers all relevant impacts. A focused review is an in-depth examination of one or
more related impacts. The high-level and focused reviews often occur at different points
in development but they should not be in conflict. High-level reviews often compare
different alternatives using estimated impacts based on secondary information sources
(e.g., mapping in lieu of field surveys). Using this information, an alternative may be
selected that will be the subject of focused studies using detailed information (resource
and impact) developed later in the design process. It’s important that the information in
the high-level review allow for a reasonably-accurate comparison.
27
The Connecticut Environmental Policy Act (CEPA) and National Environmental Policy
Act (NEPA) are State and federal laws of similar purpose. All Department actions are
subject to conformance with CEPA. Any actions taken by a federal agency also require
compliance with NEPA. Therefore, NEPA compliance is required for all federally-
funded projects. Additionally, other federal actions such as a federal permit or approval
to modify an Interstate Highway point of access (interchange) also require compliance
with NEPA, even absent federal funding.
When NEPA is applicable, the analysis and documentation may also be used to satisfy
the requirements of CEPA. Even when NEPA is not applicable, CEPA requirements
must be met. The CEPA and NEPA are high-level reviews as previously described. The
requirements are primarily “process” related and compel consideration of environmental
factors in government decisions. These laws do not establish an environmental resource
value system, prohibit specific impacts or require particular outcomes or mitigation
measures.
Impacts to certain specified resources (e.g., coastal areas, endangered species) require
permits, findings, agreement, concurrence or another other form of documentation. Some
of these actions take place in conjunction with the CEPA/NEPA process while others
have a separate timeline. Permit applications often require very detailed information on
the resource, impacts and mitigation, which is generally only available near the
completion of final design.
The timing and sequencing of environmental processes, especially permits, often defines
the critical path to construction.
1.4.2 Major Participants, Roles and Responsibilities Environmental reviews and decisions are primarily the responsibility of State and federal
agencies, with consideration of input from other government entities and the general
public. Project impacts vary widely and therefore there is also a wide range in how
external agencies affect the project development process. For complex projects with the
potential for substantial impacts, many State and federal agencies may be involved in
some capacity. For minor projects and intermediate projects, the necessary coordination
with external agencies, which will be identified on the Environmental Review Form, may
be limited. Some projects involve extensive coordination. The following summary
identifies possible project-level agency coordination.
The NEPA regulations identify roles for “cooperating”, “lead”, and “sponsoring”
agencies in the preparation of environmental documents. These roles are most pertinent
to environmental impact statements (EIS) and do not apply to categorical exclusions.
Section 1.4.4 outlines the various levels of NEPA documentation. All Department EISs
have two or more “lead agencies” (i.e., “NEPA lead”), operating in a “joint lead”
arrangement. The Department, as the direct recipient of federal funds and project
sponsor, is required to serve as NEPA lead for its projects. Additionally, a federal agency
must also serve as a NEPA lead. Typically, the federal funding agency (FAA, FHWA,
FTA) fills that role. Other agencies may serve as joint NEPA leads. Examples are a
http://www.ct.gov/opm/cwp/view.asp?a=2990&q=383210http://ceq.hss.doe.gov/laws_and_executive_orders/the_nepa_statute.htmlhttp://ceq.hss.doe.gov/laws_and_executive_orders/the_nepa_statute.htmlhttp://ceq.hss.doe.gov/ceq_regulations/regulations.htmlhttp://ceq.hss.doe.gov/nepa/regs/ceq/1501.htm
28
federal agency with permitting jurisdiction (e.g., US Army Corps of Engineers) or an
MPO. Local governmental entities that are subrecipients of federal funds may, at the
discretion of the Department and federal lead agency, serve as a joint lead agency but are
not required. When a role or decision under NEPA is assigned to the lead agency, it
should be made collaboratively by the joint lead agencies. The lead agencies are
responsible for preparation of the NEPA documentation.
As a lead agency, project owner and initiator, the Department bears primary
responsibility for advancing projects, including development of nearly all environmental-
related documentation.
“Cooperating agency” is a status that may be assigned to an agency with regulatory
jurisdiction or non-regulatory stewardship of specific environmental resources. An
agency with jurisdiction by law over some environmental aspect of the project is
designated as a cooperating agency by the lead agency. Other agencies, such as those
with relevant expertise, may be invited by the lead agency to serve as cooperating
agencies. The basic responsibilities of cooperating agencies are:
Top Related