7/28/2019 Process Valves
1/12
Non-Slam, Nozzle Check Valve
P R O C E S S V A L V E S
Enertech, Authorized Nuclear Power Industry Representative
7/28/2019 Process Valves
2/12
P R O C E S S V A L V E S
7/28/2019 Process Valves
3/12
P R O C E S S V A L V E S
TABLE OF CONTENTS
NON-SLAM, NOZZLE CHECK VALVE
Features and Applications 2
Design and Product Oerings 3, 4 & 5
Quality Assurance and Face-to-Face Dimensions 6
Materials of Construction 7
TRADEMARK INFORMATION 8
7/28/2019 Process Valves
4/12
P R O C E S S V A L V E S
2
Since 1930, ENTECH nozzle check valves have provided reliablebackow prevention for the oil, gas, water and process industries.
Beginning in 1972, ENTECH has served the nuclear industry withnozzle check valves for containment and commercial process.
The ENTECH nozzle check valve is designed to meet thecriteria of conventional check valves by allowing forwardow under normal conditions, opening easily, rmlybackseating at low velocity and closing on reverse owwith minimal seat leakage.
The ENTECH nozzle check valve meets these basicrequirements and incorporates these additional features:
The ENTECH nozzle check valveis aligned with other Cameronproducts, leading the eld in
pipeline and gas production,oshore, onshore, sub-sea,rening and industrial processing.
Non-slamming - valve closes prior to reverse ow
Short stroke length reduces closure time andeliminates water hammer
Metal-to-metal sealing Conical seating surface is self-aligning and
rovides tight shut-o
Minimum pressure loss withexcellent dynamic performance
Spring loaded disc design allowsmounting in any orientation
No scheduled maintenance
NON-SLAM, NOZZLE CHECK VALVE
APPLICATIONS
Compressor discharge
Natural gas, reneries
Pump discharge
Critical equipment discharge
Compressor/pump bypass
Storage facilities Oshore
Nuclear power plants
7/28/2019 Process Valves
5/12
P R O C E S S V A L V E S
3
NON-SLAM, NOZZLE CHECK VALVE
PRODUCT OFFERING
DRV-Z
The DRV-Z Nozzle Check is a small bore valve designed for use in piping systems from 1 in. (25 mm) to10 in. (250 mm) diameter. This size range allows the use of a simple, streamlined, in-line check designwhich is quick to respond to changes in velocity.
The DRV-Z design also provides:
Non-Slam Closure
Metal Seating
Extremely Quick Closure
Spring Loaded disc design allows mounting in any orientation
Low Pressure Loss
No Scheduled Maintenance
Sizes and Ratings
Size 1 in. (25 mm) through 10 in. (250 mm)
ANSI/ASME Classes 150 through 2500
API 3000 through 10,000
Face-to-Face API 6D, Manufacturers Standard, DIN Standard
End Connections ANSI/ASME anges are standard,weld end or other ange end congurations can be provided upon request
Other sizes and pressure classes on request
VALVE BODY
BUSHING
HELICAL SPRING
FLOW DIFFUSER
VALVE DISC
7/28/2019 Process Valves
6/12
P R O C E S S V A L V E S
4
NON-SLAM, NOZZLE CHECK VALVE
PRODUCT OFFERING
The DRV-B Nozzle Check is a large bore valve for use in compressor and pumping stations from 12 in.(300 mm) through 68 in. (1700 mm) diameter. In this size range ENTECH incorporates the use of an
annular ring design which outperforms other nozzle check valve designs. By utilizing the doughnutshaped annular disc, ENTECH Nozzle Checks are able to minimize the weight (mass) of the disc and hasthe ability to go from fully open to fully closed in a fraction of a second.
The DRV-B design also provides:
Non-Slam Closure
Metal Seating
Extremely Quick Closure
Spring Loaded disc design allows mounting in any orientation
Low Pressure Loss
No Scheduled Maintenance
Tight Shut-oSizes and Ratings
Size 12 in. (300 mm) through 68 in. (1700 mm)
ANSI/ASME Classes 150 through 2500
API 3000 through 10,000
Face-to-Face API 6D, Manufacturers Standard
End Connections ANSI/ASME anges are standard,weld end or other ange end congurations can be provided upon request
Other sizes and pressure classes on request
DRV-B
RADIAL GUIDE
HELICAL SPRING
CENTRAL TIE BOLT
VALVE BODY
FLOW DIFFUSERSPRING HOLDER
DISC
TRAPEZOID WASHER
7/28/2019 Process Valves
7/12
P R O C E S S V A L V E S
5
DRV-BK
NON-SLAM, NOZZLE CHECK VALVE
PRODUCT OFFERING
The DRV-BK utilizes the same design concept and features and benets found in ENTECHs DRV-Bdesign. The only dierence is that the DRV-BK is a compact design thus it has shorter Face-to Face and islighter weight.
The DRV-BK design also provides:
Non-Slam Closure
Metal Seating
Extremely Quick Closure
Spring Loaded disc design allows mounting in any orientation
Low Pressure Loss
No Scheduled Maintenance
Tight Shut-oSizes and Ratings
Size 12 in. (300 mm) through 64 in. (1600 mm)
ANSI/ASME Classes 150 through 900
API 3000 through 10,000
Face-to-Face API 6D, Manufacturers Standard
End Connections ANSI/ASME anges are standard,weld end or other ange end congurations can be provided upon request
Other sizes and pressure classes on request
DISC
TRAPEZOID WASHER
VALVE BODY
FLOW DIFFUSER
RADIAL GUIDE
CENTRAL TIE BOLT
HELICAL SPRING
SPRING HOLDER
7/28/2019 Process Valves
8/12
P R O C E S S V A L V E S
6
NON-SLAM, NOZZLE CHECK VALVE
QUALITY ASSURANCE
Cameron management operates a high level quality control program to ensure that all ENTECHproducts are designed and manufactured to the highest standards available using the latest technology.
The Cameron Quality Assurance program encompasses our entire operation, from order entry to nalinspection and delivery.
Cameron's Six Sigma lean manufacturing philosophy and the standard warranty which covers theproduct for 12 months after installation or 18 months after shipment, whichever occurs rst, assure thatthe design, materials and workmanship of all ENTECH products result in years of dependable operation.
SPECIFICATIONS AND COMPLIANCE:
ISO 9001-2000, API 6D, GOST R, PED/CE, API 6A.
Size Manufactures Standard API 6D
in. (mm) ASME 150-900 ASME 1500 ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500
1 (25) 3.937 (100) 7.087 (180) - - - - -
2 (50) 4.724 (120) 7.874 (200) 7.99 (203) 10.51 (267) 11.50 (292) 14.49 (368) 14.49 (368)
3 (80) 7.087 (180) 7.874 (200) 9.49 (241) 12.52 (318) 14.02 (356) 15.00 (381) 18.50 (470)
4 (100) 9.449 (240) 7.874 (200) 11.50 (292) 14.02 (356) 17.01 (432) 17.99 (457) 21.50 (546)
5 (125) 11.811 (300) 9.449 (240) - - - - -
6 (150) 13.780 (350) 13.780 (350) 14.02 (356) 17.52 (445) 22.01 (559) 24.02 (610) 27.76 (705)
8 (200) 17.717 (450) 17.717 (450) 19.49 (495) 20.98 (533) 25.98 (660) 29.02 (737) 32.76 (832)
10 (250) 19.685 (500) 19.685 (500) 24.49 (622) 24.49 (622) 30.98 (787) 32.99 (838) 39.02 (991)
DRV-Z
Size Manufactures Standard API 6D
in. (mm) ASME 150-300 ASME 600 ASME 900 ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500
12 (300) 13.780 (350) 14.764 (375) 17.323 (440) 27.52 (699) 27.99 (711) 32.99 (838) 37.99 (965) 44.49 (1130)
14 (350) 15.945 (405) 17.323 (440) 17.323 (440) 30.98 (787) 32.99 (838) 35.00 (889) 40.51 (1029) 49.49 (1257)
16 (400) 17.913 (455) 19.685 (500) 18.504 (470) 34.02 (864) 34.02 (864) 39.02 (991) 44.49 (1130) 54.49 (1384)
18 (450) 20.472 (520) 22.244 (565) 20.866 (530) 38.50 (978) 38.50 (978) 42.99 (1092) 47.99 (1219) 60.51 (1537)
20 (500) 22.441 (570) 24.606 (625) 23.425 (595) 38.50 (978) 40.00 (1016) 47.01 (1194) 52.01 (1321) 65.51 (1664)
24 (600) 26.969 (685) 29.331 (745) 33.465 (850) 50.98 (1295) 52.99 (1346) 55.00 (1397) - -
28 (700) 31.496 (800) 34.252 (870) 34.449 (875) 57.01 (1448) 59.02 (1499) 62.99 (1600) - -
30 (750) 33.661 (855) 36.614 (930) 36.417 (925) 60.00 (1524) 62.76 (1594) 65.00 (1651) - -
32 (800) 35.827 (910) 38.976 (990) 38.386 (975) - - - - -
36 (900) 40.551 (1030) 44.094 (1120) 46.850 (1190) 77.01 (1956) 82.01 (2083) 82.01 (2083) - -
40 (1000) 44.685 (1135) 48.819 (1240) - - - - - -
42 (1050) 47.047 (1195) 51.181 (1300) - - - - - -
48 (1200) 53.740 (1365) 58.465 (1485) - - - - - -
56 (1400) 62.992 (1600) 68.110 (1730) - - - - - -
60 (1500) 67.323 (1710) 73.031 (1855) - - - - - -
DRV-B
DRV-BK Consult factory for Face-To-Face Dimensions.
FACE-TO FACE DIMENSIONS
7/28/2019 Process Valves
9/12
P R O C E S S V A L V E S
7
NON-SLAM, NOZZLE CHECK VALVE
STANDARD MATERIALS OF CONSTRUCTION
GUIDE BUSHING DIFFUSER
VALVE DISC HELICAL SPRING
OPEN
CLOSED
HELICAL SPRING
SEAT
VALVE DISC
VALVE BODY VALVE BODY
DIFFUSER
CENTRALTIE BOLT
SCREW RADIAL GUIDE
SEAT(outer)
SEAT(inner)
OPEN
CLOSED
Description Standard Carbon Steel Low Temperature Carbon Steel Stainless Steel
Valve Body ASTM A216 WCC / ASTM A105 ASTM A352 LCC ASTM A351 CF8M / 316 S
Diuser ASTM A216 WCC / ASTM A105 ASTM A352 LCC ASTM A351 CF8M / 316 Stainless Steel
Valve Disc ASTM A351 CF8M / 316 Stainless Steel ASTM A351 CF8M / 316 Stainless Steel ASTM A351 CF8M / 316 Stainless Steel
Seat* 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Helical Spring Alloy X-750 Alloy X-750 Alloy X-750
Radial Guide** Alloy X-750 Alloy X-750 Alloy X-750
Screw** ASTM A193 B8M ASTM A320 B8M ASTM A193 B8M
Central Tie Bolt** ASTM A193 B7M ASTM A320 L7M ASTM A193 B8M
Guide Bushing Gr. 630 Stainless Steel Gr. 630 Stainless Steel -
tainless Steel
* 12 in. (300 mm) and larger valves use inlaid seats as standard.** 12 in. (300 mm) and larger only.Other materials available upon request to meet specic service requirements. Cameron reserves the right to substitute equivalent materials.All materials comply with NACE MR0175.
7/28/2019 Process Valves
10/12
P R O C E S S V A L V E S
TRADEMARK INFORMATION
8
REQUEST FOR QUOTES CAN BE SENT VIA
Mail To:
Enertech, a business unit of Curtiss-Wright Flow Control Company2950 Birch StreetBrea, CA 92821 USA
Phone: 714-528-2301
Fax:
http://enertech.cwfc.com
714-528-0128
7/28/2019 Process Valves
11/12
P R O C E S S V A L V E S
7/28/2019 Process Valves
12/12
P R O C E S S V A L V E S
Top Related