8/22/2019 PREMIUM_PLANETARY GEARS.pdf
1/81
PLANETARY DRIVES
1
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
2/81
Introduction
Greaves GP series planetary gearboxes in single/ double/ triple/ quadruple
reduction models are intended to satisfy all the requirements of a reliable drivefor slow speed high torque applications. Standard range of Greaves GP series
available in foot mounted and flange mounted versions, offer unparallelperformance covering ratio graduated from 3.75/1 to 2354/1 with power ratings
ranging from 0.12Kw to 1500Kw.
Greaves range of GP series planetary gearboxes and geared motors are
designed, engineered and manufactured as per the standard recommendations
of American Gear Manufacturers Association (AGMA).
This catalogue contains specifications, dimensions and ratings for standard GP
series. Our engineers will be pleased to assist in case of unusual conditions
attracting special requirements.
Salient Features
Greaves GP series gearboxes are efficient, rugged, reliable andmaintenance free. They are compact and have high power to weight
ratio.
Greaves GP series gearboxes enable the users to save on power,cost of lubricant and cost on structurals.
Greaves GPseries gearboxes are provided with two-ball bearingsper planet gear (in high speed stage) resulting in longer life of the
sun/planet gear and pins.
The planet mounted firmly between the carrier and the cageplate to avoid overhung of the planet gear on the carrier pin. Thus
eliminating the possibility of the failure of sun and planet gears.
Material Of Construction
Sun & Planet Gears: Manufactured from high quality alloy case
hardening steel for long life, wear resistant and fatigue strength.
Ring Gear: Manufactured from high alloy steel, nitride hardened to
absorb impact loads and provide desired wear resistance.
Gear Housing: Manufactured from nodular cast iron/cast steel/mild steelaccording to the power to be transmitted. Are designed rigidly to absorb
vibration and support reactionary loads.
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
3/81
Bearings: Ball bearing/ Needle bearings of reputed make used for the
planet gear. Depending on the speed and power to be transmitted,Input/Output shafts are mounted on Taper roller/ Ball bearing/ Spherical
roller bearings of appropriate size for longer life.
Shafts: Manufactured from through hardened alloy steel, with optimum
diameter as per IS standard for transmitting maximum torque.
Shaft Seals
Shaft extensions are fitted with spring loaded nitrile rubber seals toprevent outflow of oil. In case of flange mounting units with output shaft
projecting downwards, double nitrile rubber seals are provided foreffective sealing.
Lubrication
Lubrication of Gears and Bearings is entirely self-contained by automatic
splash which provides ample and positive flow of oil resulting minimumwear and noise. Recommended oil is of ISO: VG 320 viscosity grade with
EP additives. No special care is required except occasional topping up ofthe oil to specified quantity. All units are provided with combined dipstick,
ventilator and drain plugs.
In some cases, it is necessary to use a forced lubrication system with a
separate oil tank. These are marked in the rating tables.Since the gearbox is supplied without oil the casing should be filled withthe correct quantity of recommended oil before running.
Electrical
Electric motors provided with Greaves planetary geared motor is TEFC,
squirrel cage induction motors suitable for operation on 415V(+/-10%),3phase, 50c/s (+/-5%), AC supply with IP protection and class F
insulation (utilized to class B limits). Units with electric motor of specialdesign e.g. flameproof construction, crane duty motor, extended shaft
motor, motor with built in electromagnetic bake etc. can be offeredagainst specific requirements.
Mechanical Ratings & Service Factors
Greaves GP series planetary gearboxes are designed for steady loading
with fairly small mass acceleration, which includes periodic momentary
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
4/81
overloads up to four times per hour to an extend of 100% (starting or
braking). When used under such operating conditions (i.e. on continuousduty with occasional peak loads), it is not necessary to increase the size
for an additional service factor.
If the unit is subjected to sustained overloads or to shock loads, thesemust be reflected in the chosen service factor. If overloads can be
calculated or estimated then the actual loads should be used instead offactor. When detailed operating conditions are not available table 3,
gives a guide to the load characteristics of many variedapplications, and should be used to determine appropriate service
factors from table 1.
Table 1-Mechanical Service Factor
Load classification driven machine
Prime Mover
Duration ofservice-hrs perday
Uniform Moderate
shock
Heavy
shock
Electric motor,Steam turbineor Hydraulic
motor
Under 33 to 10
Over 10
0.81.00
1.25
1.001.25
1.5
1.51.75
2.00
Multi-cylinder
internalcombustion
engine
Under 3
3 to 10
Over 10
1.00
1.25
1.5
1.25
1.5
1.75
1.75
2.00
2.25
Single cylinder
internal
combustionengine
Under 3
3 to 10
Over 10
1.25
1.5
1.75
1.5
1.75
2.00
2.00
2.25
2.5
When selecting units use the actual load transmitted and not the rating ofthe prime mover, and wherever possible use output torque (Nm).
Catalogues also give input power (Kw), being the power, which the primemover must provide to allow for losses in the gear unit.
Thermal Rating
Thermal rating measures the units ability to dissipate heat. If they areexceeded the lubricant may overheat and breakdown, with consequent life
failure. Both mechanical and thermal ratings are given for all units.
Thermal ratings are affected by ambient temperature and not bymechanical considerations such as increased running time or shock loads.Cataloque ratings assume 40 degree Celsius ambient temperature, the oil
temperature then rising as the units transmit power and generate heat.
If the ambient temperature is more than 40degree Celsius, a lowertemperature rise is allowed therefore less power may be transmitted.
Similarly in cooler temperatures the thermal rating may be exceeded.
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
5/81
When selecting units use a service factor from Table 2 to calculate
equivalent loads.
For intermittent running with ample cooling time during rest periods,
thermal ratings maybe exceeded without overheating.
Table 2 - Thermal Service FactorAmbient Temp. Deg C 20 30 40 50
Service Factor 1.4 1.2 1 0.8
Selection Procedure
The preliminary selection of a GP unit can be made from the powerratings specified in the selection charts. Once the preliminary selection
has been made the external influencing factors must be taken into
consideration. Torque demanded by the application should not exceed thelimits specified.
In case of an electric motor of 4P/6P/8P,the unit rated for the input speedand the torque can be directly selected from the selection table. The next
step is to consider the service factors (Both Mechanical & thermal)demanded by the application. Refer table of service factors (Table 1 & 2)
for the same. Then the unit selected should satisfy the followingrelation.
Pi x Sf< or = Pr
Where Pi = Input power in Kw
Sf = Service factor selected
Pf = Rated power of the unit specified in the chart
In all the case of an oil-hydraulic motor the following formula may
be used to determine the input torque (Ti)
Ti = V x P x Eh Nm
62.86
Where V = Displacement of the hydraulic motor in cc/rev.
P = Pressure in bar
Eh = Hydraulic motor efficiency
The following formula is used to calculate the output torque (To)
To = Ti x R x Eg Nm
Where Ti = Maximum torque at the input
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
6/81
R = Reduction ratio of the gear unit
Eg = Efficiency of the gear reducer (98% per
Stage)
For selecting an ideal gear unit the following relation should be
satisfied
Tr > or = To x Sf
Where Tr = Rated output torque of selected unit in Nm
Thermal capacity (Pt) = Absorbed power (Kw)/ Thermal SF from Table2
Pt must be < or = Thermal capacity of the gearbox
Overhung loads
Greaves GP series planetary gearboxes are fitted with Taper roller/ Ball
bearing/ Spherical roller bearings for accommodating normal overhungloads imposed by the application. Whenever sprocket, gear, sheave orpulley is mounted on the output shaft, a calculation must be made to
determine the overhung load in Newtons on the shaft, using following
formula.Pn = Kw x 9550000 x K Newtons
N x Rp
Where Pn = Equivalent overhung load in Newtons
Kw = Power carried by shaft in Kilo Watts
Rp = Pitch radius of Sprocket, pinion, sheave or
Pulley in mm
K = Factor
Over hung member K Factor
Sprocket, single strand 1.00
Spur Pinion 1.25
V- Belt sheave 1.5
Flat belt pulley 2.0
The calculated overhung load should be compared with the permissible
values given in Table 4. For GP series units with higher overhung loads
please call our application engineers.
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
7/81
Table 4 Allowable overhung loads on output shaft Newton
Single Stage
SizeAt
shaft
middle
AtShaft
Collar
SizeAt
shaft
middle
AtShaft
Collar
SizeAt shaftmiddle
At ShaftCollar
65L 1588 2052 220M 10845 15714 345L 29111 4289670L 1588 2052 220L 4069 5874 345M 26760 37087
100M 2176 2901 240L 10723 16519 390L 29222 43137
110M 2832 3888 240M 11361 16186 390M 29222 43137140L 3525 4963 240H 11211 16005 390H 19773 26715
140H 3982 5220 270L 16174 24386 420M 32565 45062140M 3525 4963 270M 16174 24386 420H 29539 38795
155L 3772 5319 285L 13839 20834 440L 31793 47106
155H 3982 5220 285H 14730 20617 440M 31793 47106175L 3986 5909 305L 24063 35172 480L 33021 48925175M 4172 5629 305M 18982 27521 480M 33021 48925
200L 4908 7286 330L 20558 30777 480H 28870 39986200H 4374 5909 330H 18713 25760
Two stage Three stage Quadruple stage
Size
At
shaft
middle
At
Shaft
Collar
Size
At
shaft
middle
At
Shaft
Collar
SizeAt shaft
middle
At Shaft
Collar95 5338 6917 95 8473 10980 95 11958 16154
110 6022 8063 110 8383 12202 110 26701 38865
140 7998 10675 125 23647 33059 125 37537 52478
160 16125 21311 140 25145 33631 140 51286 68592
180 14164 18388 160 32889 43465 160 42146 55439
200 31738 41633 180 35294 52878 180 56159 84238
225 26339 37971 200 42250 64238 180M 52075 78977
250 25727 37383 225 41810 60275 200 62402 90930
270 37162 47723 250 56500 76079 225 68110 91329
290 43077 57547 250M 48772 69492 225M 83947 119380
320 45384 59072 270 61160 82795 250 77420 110311340 50871 64987 290 68380 91350 270 92764 134699
360 47218 65253 320 72060 99083 320 122115 168541
400 50416 67603 360 74954 103583 340 104894 140360
440 64796 85884 400 66875 89395 360 95209 139288
440 102747 143279
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
8/81
U = Uniform load H = Heavy shock load M = Moderate shock load T = Refer to Greaves
Load ClassificaLoad ClassificaLoad ClassificaLoad ClassificaLoad Classificationtiontiontiontion
Table 2
Agitators
Pure liquids U
Liquids & solids MLiquids-variable density M
Blowers
Centrifugal U
Lobe M
Vane U
Brewing and distilling
Bottling Machinery U
B rew kett les cont . dul y U
Cookers cont. duty U
Mash tubs cont. duty U
S ca le h op pe r- fr e. s ta rt s M
Can filling M/C U
Cane knifes M
Car dumpers H
Car pulleys M
Clarifiers U
Classifiers M
Clay working machinery
Brick press H
Briquette machine H
Cla y wor ki ng mac hi ne ry M
Pug mill M
Compressors
Centrifugal U
Lobe M
Reciprocating - Multi-cyl. M
Single cyl. H
Conveyor-uniformly loaded
Apron UAssembly U
Belt U
Bucket U
Chain U
Flight U
Oven U
Screw U
Conveyor - heavy duty
Apron M
Assembly M
Belt M
Bucket M
Chain M
Flight M
Live roll H
Oven M
Reciprocating H
Screw M
Shaker H
Cranes
Main hoists U
Bridge travel H
Trolley travel H
Crusher
Ore H
Stone H
Sugar H
Dredges
Cable reels M
Conveyors M
Cutter head drives HJig drives H
Manoeuvring Winches M
Pumps M
Dry dock cranes
main hoist T
auxiliary hoist Tboom, luffing T
rotating swing or slew T
t rac kin g ,dr iv e w heel s T
Elevators
bucket-uniform load U
bucket-heavy load M
bucket-continuous U
centrifugal discharge U
escalators U
freight M
gravity discharge U
man lifts T
passenger T
Fans
centrifugal U
cooling towers
induced draft T
forced draft T
induced draft M
large, mine, etc. M
large, industrial M
light, small diameter U
Feeders
apron M
belt M
disc U
reciprocating H
screw M
Food industry
beef slicer Mcereal cooker U
dough mixer M
meat grinders M
Gen er at or s- no t wel di ng U
Hammer mills H
Hoists
heavy duty H
medium duty M
skip hoist M
Laundry machines
Laundry washers reverse M
Laundry tumblers M
Lineshafts
p roc essi ng equ ipm ent M
light applications U
other line shafts U
Lumber industry
barkers- Hydraulic M
barkers- mechanical M
burner conveyor M
c hain saw an d dra g saw H
chain transfer H
craneway transfer H
de-barking drum H
edger feeder M
gang feeder M
green chain M
live rolls H
log deck H
log haul-incline H
log haul-well type Hlog turning device H
main log conveyor H
off bearing rolls M
Merry-go-roundconveyor M
roll cases H
slab conveyor Hsmall waste conveyor-belt U
small waste conveyor-chain M
sorting table M
tipple hoist conveyor M
tipple hoist drive M
transfer conveyor M
transfer rolls M
tray drive M
trimmer feed M
waste conveyor M
Machine tools
bending roll M
punch press-gear driven H
notching press-belt driven T
plate planers H
tapping machine H
Other machine tools
Main drives M
Auxiliary drives U
Metal mills
Draw bench carriage M
Main drive M
pinch, dryer and scrubber
rolls-reversing T
slitters M
Table conveyors -
non-reversing
group drives M
individual drives H
Reversing -
wire drawing Mflattening machine M
wire winging machine M
Mill-rotary type ball H
cement kilns H
dryers and coolers H
kilns, other than - cement H
pebble H
rod plain H
wedge bar H
tumbling barrels H
Mixers
conc ret e m ix ers - co nt. M
concrete mixers -int. M
constant density U
variable density M
Oil industry
chillers M
oil well pumping T
paraffin filter press M
rotary kilns M
Paper mills
agitators, (Mixers) M
barker-auxiliaries hydraulic M
barker-mechanical H
barking drum H
beater and pulper M
bleacher U
calenders M
calenders-super H
Converting machine,
exce pt cut te rs, p lat ers Mconveyors U
couch M
cutters-plates H
felt whipper H
jordans M
log haul Hpresses M
pulp machine reel M
suction roll M
washers & thickeners M
winders M
Printing presses
Pullers T
barge haul H
Pumps centrifugal U
proportioning M
reciprocating single acting
3 or more cylinders M
reciprocating double acting
2 or more cylinders M
single acting 1or 2 cylinders T
double acting; single cylinder T
rotary - gear type U
rotary - lobe, vane U
Rubber and plastics industries
crackers H
l abora tory, equi pme nt M
mixed minds H
refiners M
rubber calenders M
rubber mill-2 on line M
rubber mill-3 on line M
sheeter M
t ir e b uil di ng m achi nes T
tire and tube press openers T
tubers and strainers M
warming mills M
Sand multer M
Sewage disposal equipment
bar screens U
chemical feeders U
collectors U
de watering screws M
scum breakers M
slow or rapid mixers M
thickeners M
vacuum filters M
Screens
air washingU
r ota ry-s tone or gr avel M
t rav ell ing w ater in tak e U
Slab pushers M
Steering gear Stokers U
Sugar industry
cane knives M
crushers M
mills M
Textile industry
batchers M
calenders M
cards M
dry cans M
dryers M
dyeing machinery M
k ni tt in g mac hi ne s l oo ms M
mangles M
nappers M
pads M
range drives slashers M
soapers Mspinners M
tenter frames M
washers M
Driven Machine Load Type Driven Machine Load TypeDriven Machine Load TypeDriven Machine Load Type
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
9/81
DOUBLE STAGE
G.B.SIZE Y Mc, Nm G.B.SIZE Y Mc, Nm G.B.SIZE Y Mc,Nm
65L 69 85 270L 138 2447 95 85 87
70L 69 77 270M 138 1581 110 89 337
100L 75 160 285L 139 2886 140 123 503
100M 75 138 285H 137 989 180 138 1150
110L 81 201 305L 152 3761 200 132 1311
110M 81 266 305M 160 3333 225 129 1361
140L 99 228 330L 185 4104 250 155 1677
140M 99 312 330H 187 2070 270 185 3761
140H 96 257 345L 180 5091 290 194 4276
155L 98 421 345M 183 3437 320 216 4735
155H 96 215 390L 179 3583 340 234 5533
175L 115 485 390M 179 5846 360 216 9479
175H 116 421 390H 190 1910 400 242 11179
200L 114 827 420M 222 5898 440 254 13961
200H 115 648 420H 225 3605 500 371 16882
220L 126 728 440L 218 6478 560 362 33406
220M 123 692 440M 218 9479 630 435 44655
240L 130 1928 480L 218 6754 720 543 56168
240M 130 1618 480M 218 10666 800 549 102063
240H 128 668 480H 224 3040 890 613 126059
G.B.SIZE Y Mc,Nm G.B.SIZE Y Mc,Nm G.B.SIZE Y Mc,Nm
95 85 148 500 387 37619 180M 146 1910
110 90 621 560 429 49547 200 135 2087
125 103 710 630 477 62202 225 154 2353
140 122 692 720 574 151751 225M 154 3040
160 128 892 850 671 93035 250 153 3637
180 141 2197 980 813 473061 270 183 8750
200 135 2591 320 217 11179
225 159 3333 340 244 13961
250 152 3761 G.B.SIZE Y Mc,Nm 360 248 16882
250M 155 4438 95 86 146 440 388 24707
270 184 5091 110 90 358 500 419 35128
290 194 5898 125 103 779 560 436 47531
320 216 7539 140 122 989 630 492 105342
360 216 9307 160 130 1311 750 601 113599
400 245 10888 180 141 1581 850 694 97551
440 254 14839 980 825 343636
For safe operation of gear box, Applied Bending Moment on outputshaft is limited to values given in above
Applied bending moment in Nm = F*[Y+x]/1000
Where F= Transverse load applied on output shaft in N
ALLOWABLE BENDING MOMENT (Mc. Nm)ON OUTPUT SHAFT
QUADRUPLE STAGE
QUADRUPLE STAGE
TRIPLE STAGE
SINGLE STAGE SINGLE STAGE
TRIPLE STAGE
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
10/81
3.75 4.25 4.5 4.71 5.05
1500 2.38 2.10 1.98 1.90 1.771000 1.59 1.40 1.32 1.26 1.18
750 1.19 1.05 0.99 0.95 0.88
1500 2.83 2.50 2.36 2.25 2.10
1000 1.89 1.66 1.57 1.50 1.40
750 1.41 1.25 1.18 1.13 1.05
1500 5.46 4.82 4.55 4.35 4.05
1000 3.64 3.21 3.03 2.90 2.70
750 2.73 2.41 2.27 2.17 2.03
1500 10.91 9.63 9.10 8.69 8.11
1000 7.28 6.42 6.06 5.79 5.40
750 5.46 4.82 4.55 4.35 4.05
1500 18.36 16.20 15.30 14.62 13.631000 12.24 10.80 10.20 9.74 9.09
750 9.18 8.10 7.65 7.31 6.82
1500 39.69 35.02 33.08 31.60 29.47
1000 26.46 23.35 22.05 21.07 19.65
750 19.85 17.51 16.54 15.80 14.74
1500 42.17 37.21 35.14 33.58 31.31
1000 28.11 24.81 23.43 22.38 20.88
750 21.09 18.60 17.57 16.79 15.66
1500 59.54 52.53 49.61 47.40 44.21
1000 39.69 35.02 33.08 31.60 29.47
750 29.77 26.27 24.81 23.70 22.10
1500 79.38 70.04 66.15 63.20 58.951000 52.92 46.69 44.10 42.13 39.30
750 39.69 35.02 33.08 31.60 29.47
1500 109.15 96.31 90.96 86.90 81.05
1000 72.77 64.20 60.64 57.93 54.03
750 54.57 48.15 45.48 43.45 40.53
1500 138.92 122.57 115.76 110.60 103.15
1000 92.61 81.71 77.18 73.73 68.77
750 69.46 61.29 57.88 55.30 51.58
1500 178.61 157.59 148.84 142.20 132.63
1000 119.07 105.06 99.23 94.80 88.42
750 89.30 78.80 74.42 71.10 66.31
1500 213.33 188.24 177.78 169.85 158.42
1000 142.22 125.49 118.52 113.23 105.61
750 106.67 94.12 88.89 84.93 79.21
1500 272.87 240.77 227.39 217.25 202.63
1000 181.91 160.51 151.59 144.83 135.08
750 136.43 120.38 113.70 108.63 101.31
1500 322.48 284.54 268.73 256.75 239.47
1000 214.99 189.70 179.16 171.17 159.64
750 161.24 142.27 134.37 128.38 119.73
1500 436.59 385.23 363.83 347.60 324.20
1000 291.06 256.82 242.55 231.74 216.13
750 218.30 192.61 181.91 173.80 162.10
1500 570.54 503.42 475.45 454.26 423.67
1000 380.36 335.61 316.97 302.84 282.45
750 285 27 251 71 237 73 227 13 211 84
7475
10120
13225
390L
440L
1380
1840
2530
3220
4140
4945
6325
P.in. kW. Mechanical
220L
240L
140L
155L
175L 978
920
55
127
330L
200L
345L
270L
285L
305L
100L
110L 253
426
8.81
13.33
Ratios 3.75 - 5.05
P. kW
Thermaln1 rpmSize T2 Nm
66
65L
70L
35.27
38.07
15.33
17.67
19.6
21.4
REDUCTION RATIO
GREAVES PLANETARY SINGLE REDUCTION RATINGS
>P.kW.Mech
53
58
69.9
104.83
25.37
32.37
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
11/81
5.67 6.25 6.68 7.2 7.58
1500 4.27 3.87 3.62 3.36 3.19
1000 2.84 2.58 2.41 2.24 2.13
750 2.13 1.93 1.81 1.68 1.60
1500 5.25 4.76 4.46 4.13 3.93
1000 3.50 3.18 2.97 2.76 2.62
750 2.63 2.38 2.23 2.07 1.96
1500 10.50 9.53 8.91 8.27 7.85
1000 7.00 6.35 5.94 5.51 5.24
750 5.25 4.76 4.46 4.13 3.93
1500 19.69 17.86 16.71 15.50 14.73
1000 13.13 11.91 11.14 10.34 9.82
750 9.84 8.93 8.36 7.75 7.36
1500 32.81 29.77 27.85 25.84 24.54
1000 21.88 19.85 18.57 17.23 16.36
750 16.41 14.88 13.93 12.92 12.27
1500 52.50 47.63 44.56 41.34 39.27
1000 35.00 31.75 29.71 27.56 26.18
750 26.25 23.81 22.28 20.67 19.64
1500 78.75 71.44 66.84 62.02 58.91
1000 52.50 47.63 44.56 41.34 39.27
750 39.38 35.72 33.42 31.01 29.45
1500 108.28 98.23 91.91 85.27 81.00
1000 72.19 65.49 61.27 56.85 54.00
750 54.14 49.12 45.95 42.64 40.50
1500 147.66 133.95 125.33 116.28 110.45
1000 98.44 89.30 83.55 77.52 73.63
750 73.83 66.98 62.67 58.14 55.23
1500 196.88 178.61 167.11 155.04 147.27
1000 131.25 119.07 111.41 103.36 98.18
750 98.44 89.30 83.55 77.52 73.63
1500 255.94 232.19 217.24 201.55 191.45
1000 170.63 154.79 144.83 134.37 127.63
750 127.97 116.09 108.62 100.78 95.72
1500 321.56 291.72 272.94 253.23 240.54
1000 214.38 194.48 181.96 168.82 160.36
750 160.78 145.86 136.47 126.62 120.27
1500 406.88 369.12 345.36 320.41 304.351000 271.25 246.08 230.24 213.61 202.90
750 203.44 184.56 172.68 160.21 152.18
1500 492.19 446.51 417.77 387.60 368.17
1000 328.13 297.68 278.51 258.40 245.44
750 246.09 223.26 208.89 193.80 184.08
1500 590.63 535.82 501.32 465.12 441.80
1000 393.75 357.21 334.22 310.08 294.53
750 295.31 267.91 250.66 232.56 220.90
1500 820.31 744.19 696.28 646.00 613.61
1000 546.88 496.13 464.19 430.66 409.07
750 410.16 372.09 348.14 323.00 306.81
1500 1115.63 1012.10 946.95 878.56 834.51
1000 743.75 674.73 631.30 585.70 556.34
750 557.81 506.05 473.47 439.28 417.26
1500 1443 75 1309 77 1225 46 1136 95 1079 96
58
110M
Sp
ecialson
enquiry
>P.kW.Mech
69.9
78.87
104.83
114
25.37
32.37
38.06
1150
17.67
19.6
2760
1840
690
Ratios 5.67 - 7.58
P. kW
Thermaln1 rpmSize T2 Nm
P.in. kW. Mechanical
REDUCTION RATIO
175M
440M
17250
345M
420M
520M
480M
184
150
390M
220M
240M
270M
100M
368
305M
140M
610M
670M 39100
560M
GREAVES PLANETARY SINGLE REDUCTION RATINGS
20700
28750
3795
5175
6900
8970
11270
14260
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
12/81
8.04 8.74 9.43 10.26
1500 3.93 3.62 3.35 3.08
1000 2.62 2.41 2.24 2.06
750 1.97 1.81 1.68 1.54
1500 4.86 4.47 4.14 3.81
1000 3.24 2.98 2.76 2.54
750 2.43 2.24 2.07 1.90
1500 9.72 8.94 8.29 7.62
1000 6.48 5.96 5.52 5.08
750 4.86 4.47 4.14 3.81
1500 17.36 15.97 14.80 13.60
1000 11.57 10.64 9.86 9.07
750 8.68 7.98 7.40 6.80
1500 31.24 28.74 26.63 24.48
1000 20.83 19.16 17.76 16.32
750 15.62 14.37 13.32 12.24
1500 48.59 44.70 41.43 38.08
1000 32.40 29.80 27.62 25.39
750 24.30 22.35 20.72 19.04
1500 71.73 65.99 61.16 56.21
1000 47.82 43.99 40.77 37.48
750 35.87 32.99 30.58 28.11
1500 101.82 93.66 86.81 79.79
1000 67.88 62.44 57.87 53.19
750 50.91 46.83 43.40 39.89
1500 138.84 127.72 118.38 108.801000 92.56 85.15 78.92 72.53
750 69.42 63.86 59.19 54.40
1500 185.12 170.29 157.83 145.07
1000 123.41 113.53 105.22 96.71
750 92.56 85.15 78.92 72.53
1500 242.97 223.51 207.16 190.40
1000 161.98 149.01 138.10 126.93
750 121.49 111.76 103.58 95.20
1500 289.25 266.09 246.62 226.67
1000 192.83 177.39 164.41 151.11
750 144.63 133.04 123.31 113.33
1500 370.24 340.59 315.67 290.13
1000 246.83 227.06 210.45 193.42
750 185.12 170.29 157.83 145.07
1500 451.23 415.09 384.72 353.60
1000 300.82 276.73 256.48 235.73
750 225.62 207.55 192.36 176.80
1500 543.79 500.24 463.64 426.13
1000 362.53 333.49 309.09 284.09
750 271.90 250.12 231.82 213.07
1500 763.63 702.47 651.07 598.40
1000 509.08 468.31 434.04 398.93
750 381.81 351.23 325.53 299.20
1500 1052.88 968.55 897.68 825.06
1000 701.92 645.70 598.45 550.04
750 526.44 484.28 448.84 412.53
1500 1365 27 1255 92 1164 03 1069 86
GREAVES PLANETARY SINGLE REDUCTION RATINGS
52325
12075
14375
480H
22425
520H
P.in. kW. Mechanical
870H
940H
18400
9200
27025
37950
560H
610H
863
6900
3565
700H
670H
200H
240H
285H
330H
390H
420H
750H
114.83
32.37
Ratios 8.04 - 10.26
P. kW
Thermaln1 rpmSize T2 Nm
242
140H
5060
Sp
ecialson
enquiry
132.05
141
152
170
78.87
155H
REDUCTION RATIO
>P.kW.Mech
53
69.9
2415
196
483
1553
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
13/81
Ratios 14 - 38
14 20 25 27 30 33 35 38
1500 2.26 1.58 1.26 1.17 1.05 0.96 0.90 0.831000 1.50 1.05 0.84 0.78 0.70 0.64 0.60 0.55750 1.13 0.79 0.63 0.58 0.53 0.48 0.45 0.421500 4.23 2.96 2.37 2.19 1.97 1.79 1.69 1.56
1000 2.82 1.97 1.58 1.46 1.32 1.20 1.13 1.04750 2.11 1.48 1.18 1.10 0.99 0.90 0.85 0.781500 7.75 5.43 4.34 4.02 3.62 3.29 3.10 2.861000 5.17 3.62 2.89 2.68 2.41 2.19 2.07 1.90750 3.88 2.71 2.17 2.01 1.81 1.64 1.55 1.431500 11.98 8.39 6.71 6.21 5.59 5.08 4.79 4.421000 7.99 5.59 4.47 4.14 3.73 3.39 3.20 2.94750 5.99 4.19 3.36 3.11 2.80 2.54 2.40 2.211500 17.62 12.34 9.87 9.14 8.22 7.48 7.05 6.491000 11.75 8.22 6.58 6.09 5.48 4.98 4.70 4.33750 8.55 5.99 4.79 4.44 3.99 3.63 3.42 3.151500 25.38 17.76 14.21 13.16 11.84 10.77 10.15 9.351000 16.92 11.84 9.47 8.77 7.90 7.18 6.77 6.23750 12.69 8.88 7.11 6.58 5.92 5.38 5.08 4.671500 35.25 24.67 19.74 18.28 16.45 14.95 14.10 12.991000 23.50 16.45 13.16 12.18 10.97 9.97 9.40 8.66
750 17.62 12.34 9.87 9.14 8.22 7.48 7.05 6.491500 45.11 31.58 25.26 23.39 21.05 19.14 18.05 16.621000 30.08 21.05 16.84 15.60 14.04 12.76 12.03 11.08750 22.56 15.79 12.63 11.70 10.53 9.57 9.02 8.311500 60.62 42.44 33.95 31.43 28.29 25.72 24.25 22.331000 40.42 28.29 22.63 20.96 18.86 17.15 16.17 14.89750 30.31 21.22 16.97 15.72 14.15 12.86 12.12 11.171500 76.13 53.29 42.63 39.48 35.53 32.30 30.45 28.051000 50.75 35.53 28.42 26.32 23.69 21.53 20.30 18.70750 38.07 26.65 21.32 19.74 17.76 16.15 15.23 14.021500 94.46 66.12 52.90 48.98 44.08 40.07 37.78 34.801000 62.97 44.08 35.26 32.65 29.39 26.72 25.19 23.20750 47.23 33.06 26.45 24.49 22.04 20.04 18.89 17.401500 112.79 78.95 63.16 58.48 52.63 47.85 45.11 41.551000 75.19 52.63 42.11 38.99 35.09 31.90 30.08 27.70750 56.39 39.48 31.58 29.24 26.32 23.92 22.56 20.78
1500 138.16 96.71 77.37 71.64 64.48 58.62 55.27 50.901000 92.11 64.48 51.58 47.76 42.98 39.08 36.84 33.94750 69.08 48.36 38.69 35.82 32.24 29.31 27.63 25.451500 197.38 138.16 110.53 102.34 92.11 83.74 78.95 72.721000 131.58 92.11 73.69 68.23 61.41 55.82 52.63 48.48750 98.69 69.08 55.27 51.17 46.05 41.87 39.48 36.361500 260.82 182.57 146.06 135.24 121.72 110.65 104.33 96.091000 173.88 121.72 97.37 90.16 81.14 73.77 69.55 64.06750 130.41 91.29 73.03 67.62 60.86 55.33 52.16 48.051500 338.36 236.85 189.48 175.45 157.90 143.55 135.34 124.661000 225.57 157.90 126.32 116.96 105.27 95.70 90.23 83.11750 169.18 118.43 94.74 87.72 78.95 71.77 67.67 62.331500 451.15 315.80 252.64 233.93 210.54 191.40 180.46 166.211000 300.77 210.54 168.43 155.95 140.36 127.60 120.31 110.81750 225.57 157.90 126.32 116.96 105.27 95.70 90.23 83.111500 697.87 488.51 390.81 361.86 325.67 296.07 279.15 257.111000 465.25 325.67 260.54 241.24 217.12 197.38 186.10 171.41750 348.94 244.25 195.40 180.93 162.84 148.03 139.57 128.561500 1029.18 720.43 576.34 533.65 480.28 436.62 411.67 379.171000 686.12 480.28 384.23 355.77 320.19 291.08 274.45 252.78750 514.59 360.21 288.17 266.82 240.14 218.31 205.84 189.591500 1452.13 1016.49 813.19 752.96 677.66 616.06 580.85 535.001000 968.09 677.66 542.13 501.97 451.77 410.70 387.24 356.66750 726.07 508.25 406.60 376.48 338.83 308.03 290.43 267.501500 1959.68 1371.77 1097.42 1016.13 914.52 831.38 783.87 721.991000 1306.45 914.52 731.61 677.42 609.68 554.25 522.58 481.32750 979.84 685.89 548.71 508.06 457.26 415.69 391.94 360.99
Specials on request
GREAVES PLANETARY DOUBLE REDUCTION RATINGS
Size T2 Nm n1 rpm
REDUCTION RATIOP.Kw
ThermalP.in kW.Mechanical
95 184
>P2.
Mech
anical
110 345
140 633
160 978
180 1438 12.8
200 2070 14.76
225 2875 18.37
250 3680 20.73
270 4945 25.09
290 6210 27.79
320 7705 33.9
340 9200 37.36
360 11270 47.15
400 16100 53.82
440 21275 55.19
500 27600
Checkforthermalrating
capacitiesand
forcedcoolingrequ
irements'
560 36800
630 56925
720 83950
800 118450
890 159850
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
14/81
Ratios 41 - 64
41 45 47 50 55 58 60 64
1500 0.77 0.70 0.67 0.63 0.57 0.54 0.53 0.49
1000 0.51 0.47 0.45 0.42 0.38 0.36 0.35 0.33750 0.39 0.35 0.34 0.32 0.29 0.27 0.26 0.25
1500 1.44 1.32 1.26 1.18 1.08 1.02 0.99 0.93
1000 0.96 0.88 0.84 0.79 0.72 0.68 0.66 0.62
750 0.72 0.66 0.63 0.59 0.54 0.51 0.49 0.46
1500 2.65 2.41 2.31 2.17 1.97 1.87 1.81 1.70
1000 1.77 1.61 1.54 1.45 1.32 1.25 1.21 1.13
750 1.32 1.21 1.15 1.09 0.99 0.94 0.90 0.85
1500 4.09 3.73 3.57 3.36 3.05 2.89 2.80 2.62
1000 2.73 2.49 2.38 2.24 2.03 1.93 1.86 1.75
750 2.05 1.86 1.78 1.68 1.53 1.45 1.40 1.31
1500 6.02 5.48 5.25 4.93 4.49 4.25 4.11 3.86
1000 4.01 3.66 3.50 3.29 2.99 2.84 2.74 2.57
750 2.92 2.66 2.55 2.40 2.18 2.06 2.00 1.87
1500 8.67 7.90 7.56 7.11 6.46 6.13 5.92 5.551000 5.78 5.26 5.04 4.74 4.31 4.08 3.95 3.70
750 4.33 3.95 3.78 3.55 3.23 3.06 2.96 2.78
1500 12.04 10.97 10.50 9.87 8.97 8.51 8.22 7.71
1000 8.02 7.31 7.00 6.58 5.98 5.67 5.48 5.14
750 6.02 5.48 5.25 4.93 4.49 4.25 4.11 3.86
1500 15.41 14.04 13.44 12.63 11.48 10.89 10.53 9.87
1000 10.27 9.36 8.96 8.42 7.66 7.26 7.02 6.58
750 7.70 7.02 6.72 6.32 5.74 5.44 5.26 4.93
1500 20.70 18.86 18.06 16.97 15.43 14.63 14.15 13.26
1000 13.80 12.57 12.04 11.32 10.29 9.76 9.43 8.84
750 10.35 9.43 9.03 8.49 7.72 7.32 7.07 6.63
1500 26.00 23.69 22.68 21.32 19.38 18.38 17.76 16.65
1000 17.33 15.79 15.12 14.21 12.92 12.25 11.84 11.10
750 13.00 11.84 11.34 10.66 9.69 9.19 8.88 8.33
1500 32.25 29.39 28.14 26.45 24.04 22.80 22.04 20.66
1000 21.50 19.59 18.76 17.63 16.03 15.20 14.69 13.78
750 16.13 14.69 14.07 13.22 12.02 11.40 11.02 10.33
1500 38.51 35.09 33.60 31.58 28.71 27.22 26.32 24.67
1000 25.68 23.39 22.40 21.05 19.14 18.15 17.54 16.45
750 19.26 17.54 16.80 15.79 14.35 13.61 13.16 12.34
1500 47.18 42.98 41.16 38.69 35.17 33.35 32.24 30.22
1000 31.45 28.66 27.44 25.79 23.45 22.23 21.49 20.15
750 23.59 21.49 20.58 19.34 17.58 16.67 16.12 15.11
1500 67.40 61.41 58.79 55.27 50.24 47.64 46.05 43.18
1000 44.93 40.94 39.20 36.84 33.49 31.76 30.70 28.78
750 33.70 30.70 29.40 27.63 25.12 23.82 23.03 21.59
1500 89.06 81.14 77.69 73.03 66.39 62.96 60.86 57.05
1000 59.37 54.10 51.79 48.69 44.26 41.97 40.57 38.04
750 44.53 40.57 38.85 36.51 33.20 31.48 30.43 28.53
1500 115.54 105.27 100.79 94.74 86.13 81.67 78.95 74.02
1000 77.03 70.18 67.19 63.16 57.42 54.45 52.63 49.34
750 57.77 52.63 50.39 47.37 43.06 40.84 39.48 37.01
1500 154.05 140.36 134.38 126.32 114.84 108.90 105.27 98.69
1000 102.70 93.57 89.59 84.21 76.56 72.60 70.18 65.79
750 77.03 70.18 67.19 63.16 57.42 54.45 52.63 49.34
1500 238.30 217.12 207.88 195.40 177.64 168.45 162.84 152.66
1000 158.86 144.74 138.58 130.27 118.43 112.30 108.56 101.77
750 119.15 108.56 103.94 97.70 88.82 84.23 81.42 76.33
1500 351.43 320.19 306.56 288.17 261.97 248.42 240.14 225.13
1000 234.29 213.46 204.38 192.11 174.65 165.62 160.09 150.09
750 175.71 160.09 153.28 144.09 130.99 124.21 120.07 112.571500 495.85 451.77 432.55 406.60 369.63 350.52 338.83 317.65
1000 330.57 301.18 288.37 271.06 246.42 233.68 225.89 211.77
750 247 93 225 89 216 28 203 30 184 82 175 26 169 42 158 83
95
160
110
140
GREAVES PLANETARY DOUBLE REDUCTION RATINGS
P.in kW.Mechanical
n1 rpmSize T2 Nm
REDUCTION RATIO
250 3680
270 4945
14.76
18.37
200 2070
225 2875
20.73
25.09
27.79
33.9
37.36
47.15
53.82
55.19
ortherm
alratingcapacitiesandforced
coo
lingrequirements'
P.Kw
Thermal
>P2.
Mechanical
345
633
978
184
290 6210
320 7705
16100
440 21275
340 9200
360 11270
720 83950
800 118450
1438 12.8180
630 56925
500 27600
560 36800
400
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
15/81
75 80 86 95 101 118 125 139 149 158 167 178 185
1500 0.66 0.62 0.57 0.52 0.49 0.42 0.39 0.35 0.33 0.31 0.30 0.28 0.27
1000 0.44 0.41 0.38 0.35 0.33 0.28 0.26 0.24 0.22 0.21 0.20 0.18 0.18
750 0.33 0.31 0.29 0.26 0.24 0.21 0.20 0.18 0.17 0.16 0.15 0.14 0.13
1500 1.18 1.11 1.03 0.93 0.88 0.75 0.71 0.64 0.60 0.56 0.53 0.50 0.48
1000 0.79 0.74 0.69 0.62 0.59 0.50 0.47 0.43 0.40 0.37 0.35 0.33 0.32
750 0.59 0.56 0.52 0.47 0.44 0.38 0.36 0.32 0.30 0.28 0.27 0.25 0.24
1500 1.89 1.78 1.65 1.50 1.41 1.20 1.14 1.02 0.95 0.90 0.85 0.80 0.77
1000 1.26 1.18 1.10 1.00 0.94 0.80 0.76 0.68 0.64 0.60 0.57 0.53 0.51
750 0.95 0.89 0.83 0.75 0.70 0.60 0.57 0.51 0.48 0.45 0.43 0.40 0.38
1500 2.63 2.47 2.30 2.08 1.95 1.67 1.58 1.42 1.32 1.25 1.18 1.11 1.07
1000 1.75 1.64 1.53 1.39 1.30 1.12 1.05 0.95 0.88 0.83 0.79 0.74 0.71
750 1.32 1.23 1.15 1.04 0.98 0.84 0.79 0.71 0.66 0.62 0.59 0.55 0.53
1500 3.68 3.45 3.21 2.91 2.74 2.34 2.21 1.99 1.85 1.75 1.65 1.55 1.49
1000 2.46 2.30 2.14 1.94 1.82 1.56 1.47 1.33 1.24 1.17 1.10 1.03 1.00
750 1.84 1.73 1.61 1.45 1.37 1.17 1.11 0.99 0.93 0.87 0.83 0.78 0.75
1500 5.26 4.93 4.59 4.16 3.91 3.35 3.16 2.84 2.65 2.50 2.36 2.22 2.13
1000 3.51 3.29 3.06 2.77 2.61 2.23 2.11 1.89 1.77 1.67 1.58 1.48 1.42
750 2.63 2.47 2.30 2.08 1.95 1.67 1.58 1.42 1.32 1.25 1.18 1.11 1.07
1500 7.11 6.66 6.20 5.61 5.28 4.52 4.26 3.83 3.58 3.37 3.19 2.99 2.88
1000 4.74 4.44 4.13 3.74 3.52 3.01 2.84 2.56 2.38 2.25 2.13 2.00 1.92
750 3.55 3.33 3.10 2.80 2.64 2.26 2.13 1.92 1.79 1.69 1.60 1.50 1.44
1500 8.68 8.14 7.57 6.86 6.45 5.52 5.21 4.69 4.37 4.12 3.90 3.66 3.52
1000 5.79 5.43 5.05 4.57 4.30 3.68 3.47 3.12 2.91 2.75 2.60 2.44 2.35
750 4.34 4.07 3.79 3.43 3.22 2.76 2.61 2.34 2.19 2.06 1.95 1.83 1.76
1500 11.32 10.61 9.87 8.93 8.40 7.19 6.79 6.11 5.70 5.37 5.08 4.77 4.59
1000 7.54 7.07 6.58 5.96 5.60 4.80 4.53 4.07 3.80 3.58 3.39 3.18 3.06
750 5.66 5.30 4.93 4.47 4.20 3.60 3.39 3.05 2.85 2.69 2.54 2.38 2.29
1500 13.95 13.08 12.16 11.01 10.36 8.87 8.37 7.53 7.02 6.62 6.26 5.88 5.65
1000 9.30 8.72 8.11 7.34 6.90 5.91 5.58 5.02 4.68 4.41 4.18 3.92 3.77
750 6.97 6.54 6.08 5.51 5.18 4.43 4.18 3.76 3.51 3.31 3.13 2.94 2.83
1500 17.11 16.04 14.92 13.50 12.70 10.87 10.26 9.23 8.61 8.12 7.68 7.21 6.93
1000 11.40 10.69 9.95 9.00 8.47 7.25 6.84 6.15 5.74 5.41 5.12 4.81 4.62
750 8.55 8.02 7.46 6.75 6.35 5.44 5.13 4.61 4.31 4.06 3.84 3.60 3.47
1500 20.53 19.24 17.90 16.21 15.24 13.05 12.32 11.08 10.33 9.74 9.22 8.65 8.32
1000 13.68 12.83 11.93 10.80 10.16 8.70 8.21 7.38 6.89 6.50 6.15 5.77 5.55
750 10.26 9.62 8.95 8.10 7.62 6.52 6.16 5.54 5.17 4.87 4.61 4.32 4.16
1500 28.95 27.14 25.25 22.85 21.50 18.40 17.37 15.62 14.57 13.74 13.00 12.20 11.74
1000 19.30 18.09 16.83 15.24 14.33 12.27 11.58 10.41 9.71 9.16 8.67 8.13 7.82
750 14.47 13.57 12.62 11.43 10.75 9.20 8.68 7.81 7.29 6.87 6.50 6.10 5.871500 39.48 37.01 34.43 31.16 29.31 25.09 23.69 21.30 19.87 18.74 17.73 16.63 16.00
1000 26.32 24.67 22.95 20.78 19.54 16.73 15.79 14.20 13.25 12.49 11.82 11.09 10.67
750 19.74 18.50 17.21 15.58 14.66 12.55 11.84 10.65 9.94 9.37 8.86 8.32 8.00
1500 52.63 49.34 45.90 41.55 39.08 33.45 31.58 28.40 26.49 24.98 23.64 22.18 21.34
1000 35.09 32.90 30.60 27.70 26.06 22.30 21.05 18.93 17.66 16.66 15.76 14.78 14.23
750 26.32 24.67 22.95 20.78 19.54 16.73 15.79 14.20 13.25 12.49 11.82 11.09 10.67
1500 65.79 61.68 57.38 51.94 48.86 41.82 39.48 35.50 33.12 31.23 29.55 27.72 26.67
1000 43.86 41.12 38.25 34.63 32.57 27.88 26.32 23.67 22.08 20.82 19.70 18.48 17.78
750 32.90 30.84 28.69 25.97 24.43 20.91 19.74 17.75 16.56 15.62 14.77 13.86 13.34
1500 107.90 101.16 94.10 85.18 80.12 68.58 64.74 58.22 54.31 51.22 48.46 45.46 43.74
1000 71.93 67.44 62.73 56.79 53.42 45.72 43.16 38.81 36.21 34.15 32.31 30.31 29.16
750 53.95 50.58 47.05 42.59 40.06 34.29 32.37 29.11 27.16 25.61 24.23 22.73 21.87
15 00 16 0. 53 15 0. 50 14 0. 00 12 6. 74 11 9. 21 1 02 .0 3 96 .3 2 86 .6 2 80 .81 76 .20 7 2. 10 6 7. 64 6 5. 08
1000 107.02 100.33 93.33 84.49 79.47 68.02 64.21 57.75 53.87 50.80 48.06 45.09 43.39
750 80.27 75.25 70.00 63.37 59.60 51.02 48.16 43.31 40.40 38.10 36.05 33.82 32.54
1500 228.96 214.65 199.67 180.76 170.02 145.52 137.37 123.54 115.25 108.68 102.83 96.47 92.82
1000 152.64 143.10 133.11 120.50 113.35 97.02 91.58 82.36 76.83 72.45 68.55 64.31 61.88
750 114.48 1 07.32 99.84 90.38 85.01 72.76 68.69 61.77 57.62 54.34 51.41 48.24 46.41
1500 310.54 291.13 270.82 245.16 230.60 197.38 186.32 167.56 156.31 147.41 139.46 130.85 125.89
10 00 20 7. 03 19 4. 09 18 0. 55 16 3. 44 15 3. 73 1 31 .5 8 1 24 .2 2 1 11 .7 1 1 04 .21 98 .27 9 2. 98 8 7. 23 8 3. 93
750 155.27 145.57 135.41 122.58 115.30 98.69 93.16 83.78 78.16 73.70 69.73 65.42 62.95
1500 481.60 451.50 420.00 380.21 357.62 306.10 288.96 259.86 242.42 228.61 216.29 202.92 195.24
1000 321.07 301.00 280.00 253.47 238.42 204.07 192.64 173.24 161.61 152.41 144.19 135.28 130.16
750 240.80 225.75 210.00 190.11 178.81 153.05 144.48 129.93 121.21 114.30 108.14 101.46 97.62
1500 763.19 715.49 665.57 602.52 566.73 485.08 457.92 411.79 384.16 362.27 342.75 321.57 309.40
1000 508.80 477.00 443.72 401.68 377.82 323.39 305.28 274.53 256.10 241.52 228.50 214.38 206.27
750 381.60 357.75 332.79 301.26 283.36 242.54 228.96 205.90 192.08 181.14 171.38 160.78 154.70
Checkforforcedcoolingre
quirements'
Size T2 Nm
95
110
160
518
828
8970
250M
225
290
Ratios 75 - 185
7475
1150
125
140
200
3795
4945
270
250
17250360
3105
333500
28750
47150
70150
100050
135700
210450
23000
6095
GREAVES PLANETARY TRIPLE REDUCTION RATINGS
12650
n1 rpm
P in kW MECHANICAL
1610
288
320
2300180
REDUCTION RATIO
400
850
980
440
500
560
630
720
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
16/81
196 210 225 237 252 274 295 302 322 352 374 394
1500 0.25 0.23 0.22 0.21 0.20 0.18 0.17 0.16 0.15 0.14 0.13 0.13
1000 0.17 0.16 0.15 0.14 0.13 0.12 0.11 0.11 0.10 0.09 0.09 0.08
750 0.13 0.12 0.11 0.10 0.10 0.09 0.08 0.08 0.08 0.07 0.07 0.06
1500 0.45 0.42 0.39 0.37 0.35 0.32 0.30 0.29 0.28 0.25 0.24 0.23
1000 0.30 0.28 0.26 0.25 0.23 0.22 0.20 0.20 0.18 0.17 0.16 0.15
750 0.23 0.21 0.20 0.19 0.18 0.16 0.15 0.15 0.14 0.13 0.12 0.11
1500 0.73 0.68 0.63 0.60 0.56 0.52 0.48 0.47 0.44 0.40 0.38 0.36
1000 0.48 0.45 0.42 0.40 0.38 0.35 0.32 0.31 0.29 0.27 0.25 0.24
750 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.24 0.22 0.20 0.19 0.18
1500 1.01 0.94 0.88 0.83 0.78 0.72 0.67 0.65 0.61 0.56 0.53 0.50
1000 0.67 0.63 0.58 0.56 0.52 0.48 0.45 0.44 0.41 0.37 0.35 0.33
750 0.50 0.47 0.44 0.42 0.39 0.36 0.33 0.33 0.31 0.28 0.26 0.25
1500 1.41 1.32 1.23 1.17 1.10 1.01 0.94 0.91 0.86 0.79 0.74 0.70
1000 0.94 0.88 0.82 0.78 0.73 0.67 0.62 0.61 0.57 0.52 0.49 0.47
750 0.70 0.66 0.61 0.58 0.55 0.50 0.47 0.46 0.43 0.39 0.37 0.35
1500 2.01 1.88 1.75 1.67 1.57 1.44 1.34 1.31 1.23 1.12 1.06 1.00
1000 1.34 1.25 1.17 1.11 1.04 0.96 0.89 0.87 0.82 0.75 0.70 0.67
750 1.01 0.94 0.88 0.83 0.78 0.72 0.67 0.65 0.61 0.56 0.53 0.50
1500 2.72 2.54 2.37 2.25 2.11 1.94 1.81 1.76 1.66 1.51 1.42 1.35
1000 1.81 1.69 1.58 1.50 1.41 1.30 1.20 1.18 1.10 1.01 0.95 0.90
750 1.36 1.27 1.18 1.12 1.06 0.97 0.90 0.88 0.83 0.76 0.71 0.68
1500 3.32 3.10 2.89 2.75 2.58 2.38 2.21 2.16 2.02 1.85 1.74 1.65
1000 2.22 2.07 1.93 1.83 1.72 1.58 1.47 1.44 1.35 1.23 1.16 1.10
750 1.66 1.55 1.45 1.37 1.29 1.19 1.10 1.08 1.01 0.93 0.87 0.83
1500 4.33 4.04 3.77 3.58 3.37 3.10 2.88 2.81 2.64 2.41 2.27 2.15
1000 2.89 2.69 2.51 2.39 2.25 2.07 1.92 1.87 1.76 1.61 1.51 1.44
750 2.17 2.02 1.89 1.79 1.68 1.55 1.44 1.41 1.32 1.21 1.13 1.08
1500 5.34 4.98 4.65 4.41 4.15 3.82 3.55 3.46 3.25 2.97 2.80 2.66
1000 3.56 3.32 3.10 2.94 2.77 2.55 2.36 2.31 2.17 1.98 1.86 1.77
750 2.67 2.49 2.32 2.21 2.08 1.91 1.77 1.73 1.62 1.49 1.40 1.33
1500 6.55 6.11 5.70 5.41 5.09 4.68 4.35 4.25 3.98 3.64 3.43 3.26
1000 4.36 4.07 3.80 3.61 3.39 3.12 2.90 2.83 2.66 2.43 2.29 2.17
750 3.27 3.05 2.85 2.71 2.55 2.34 2.17 2.12 1.99 1.82 1.72 1.63
1500 7.85 7.33 6.84 6.50 6.11 5.62 5.22 5.10 4.78 4.37 4.12 3.91
1000 5.24 4.89 4.56 4.33 4.07 3.75 3.48 3.40 3.19 2.92 2.74 2.60
750 3.93 3.67 3.42 3.25 3.05 2.81 2.61 2.55 2.39 2.19 2.06 1.95
1500 11.08 10.34 9.65 9.16 8.62 7.92 7.36 7.19 6.74 6.17 5.81 5.51
1000 7.38 6.89 6.43 6.11 5.74 5.28 4.91 4.79 4.50 4.11 3.87 3.67
750 5.54 5.17 4.82 4.58 4.31 3.96 3.68 3.59 3.37 3.08 2.90 2.76
1500 15.11 14.10 13.16 12.49 11.75 10.81 10.04 9.80 9.19 8.41 7.92 7.51
1000 10.07 9.40 8.77 8.33 7.83 7.20 6.69 6.54 6.13 5.61 5.28 5.01
750 7.55 7.05 6.58 6.25 5.87 5.40 5.02 4.90 4.60 4.21 3.96 3.76
1500 20.14 18.80 17.54 16.66 15.66 14.41 13.38 13.07 12.26 11.21 10.55 10.02
1000 13.43 12.53 11.70 11.10 10.44 9.60 8.92 8.71 8.17 7.48 7.04 6.68
750 10.07 9.40 8.77 8.33 7.83 7.20 6.69 6.54 6.13 5.61 5.28 5.01
1500 25.18 23.50 21.93 20.82 19.58 18.01 16.73 16.34 15.32 14.02 13.19 12.52
1000 16.78 15.66 14.62 13.88 13.05 12.01 11.15 10.89 10.22 9.35 8.80 8.35
750 12.59 11.75 10.97 10.41 9.79 9.00 8.36 8.17 7.66 7.01 6.60 6.26
1500 41.29 38.54 35.97 34.15 32.11 29.53 27.43 26.80 25.13 22.99 21.64 20.54
1000 27.53 25.69 23.98 22.76 21.41 19.69 18.29 17.86 16.75 15.33 14.43 13.69
750 20.64 19.27 17.98 17.07 16.06 14.77 13.72 13.40 12.57 11.49 10.82 10.27
1500 61.43 57.33 53.51 50.80 47.78 43.94 40.81 39.87 37.39 34.20 32.19 30.56
1000 40.95 38.22 35.67 33.87 31.85 29.29 27.21 26.58 24.93 22.80 21.46 20.37
750 30.71 28.67 26.76 25.40 23.89 21.97 20.41 19.93 18.70 17.10 16.10 15.28
1500 87.61 81.77 76.32 72.45 68.14 62.67 58.21 56.86 53.33 48.78 45.91 43.58
1000 58.41 54.51 50.88 48.30 45.43 41.78 38.81 37.91 35.55 32.52 30.61 29.06
750 43.81 40.89 38.16 36.23 34.07 31.34 29.10 28.43 26.66 24.39 22.96 21.79
1500 118.83 110.91 103.51 98.27 92.42 85.00 78.95 77.12 72.33 66.17 62.27 59.11
1000 79.22 73.94 69.01 65.51 61.62 56.67 52.63 51.41 48.22 44.11 41.52 39.41
750 59.41 55.45 51.76 49.14 46.21 42.50 39.48 38.56 36.17 33.08 31.14 29.56
1500 184.29 172.00 160.53 152.41 143.33 131.83 122.44 119.60 112.17 102.61 96.58 91.68
1000 122 86 114 67 107 02 101 60 95 56 87 88 81 63 79 74 74 78 68 41 64 39 61 12
160 1610
P.in. kW. Mechanical
T2 Nm n1 rpm
288
518
828
1150
2300
3105
3795
4945
6095
7475
8970
12650
17250
23000
28750
47150
290
Size
180
200
225
70150
100050
135700
210450
Ratios 196 - 394
95
110
125
140
500
REDUCTION RATIO
250
250M
GREAVES PLANETARY TRIPLE REDUCTION RATINGS
850
560
630
720
320
360
400
440
270
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
17/81
405 430 456 472 501 533 564 599 625 665 710
1500 0.19 0.18 0.17 0.17 0.16 0.15 0.14 0.13 0.13 0.12 0.11
1000 0.13 0.12 0.12 0.11 0.11 0.10 0.09 0.09 0.08 0.08 0.07
750 0.10 0.09 0.09 0.08 0.08 0.07 0.07 0.07 0.06 0.06 0.06
1500 0.31 0.29 0.27 0.26 0.25 0.23 0.22 0.21 0.20 0.19 0.18
1000 0.20 0.19 0.18 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.12
750 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.10 0.10 0.09 0.09
1500 0.46 0.44 0.41 0.40 0.37 0.35 0.33 0.31 0.30 0.28 0.26
1000 0.31 0.29 0.27 0.26 0.25 0.23 0.22 0.21 0.20 0.19 0.18
750 0.23 0.22 0.21 0.20 0.19 0.18 0.17 0.16 0.15 0.14 0.13
1500 0.66 0.62 0.58 0.56 0.53 0.50 0.47 0.44 0.43 0.40 0.38
1000 0.44 0.41 0.39 0.38 0.35 0.33 0.31 0.30 0.28 0.27 0.25
750 0.33 0.31 0.29 0.28 0.27 0.25 0.24 0.22 0.21 0.20 0.19
1500 0.88 0.83 0.78 0.75 0.71 0.67 0.63 0.59 0.57 0.53 0.50
1000 0.58 0.55 0.52 0.50 0.47 0.44 0.42 0.40 0.38 0.36 0.33
750 0.45 0.43 0.40 0.39 0.37 0.34 0.32 0.31 0.29 0.28 0.26
1500 1.17 1.10 1.04 1.00 0.95 0.89 0.84 0.79 0.76 0.71 0.67
1000 0.78 0.73 0.69 0.67 0.63 0.59 0.56 0.53 0.51 0.47 0.44
750 0.58 0.55 0.52 0.50 0.47 0.44 0.42 0.40 0.38 0.36 0.33
1500 1.51 1.42 1.34 1.30 1.22 1.15 1.08 1.02 0.98 0.92 0.86
1000 1.01 0.95 0.89 0.86 0.81 0.77 0.72 0.68 0.65 0.61 0.57
750 0.76 0.71 0.67 0.65 0.61 0.57 0.54 0.51 0.49 0.46 0.43
1500 1.95 1.84 1.73 1.67 1.58 1.48 1.40 1.32 1.26 1.19 1.11
1000 1.30 1.22 1.15 1.12 1.05 0.99 0.93 0.88 0.84 0.79 0.74
750 0.97 0.92 0.87 0.84 0.79 0.74 0.70 0.66 0.63 0.59 0.56
1500 2.44 2.30 2.16 2.09 1.97 1.85 1.75 1.65 1.58 1.48 1.39
1000 1.62 1.53 1.44 1.39 1.31 1.23 1.17 1.10 1.05 0.99 0.93
750 1.22 1.15 1.08 1.05 0.98 0.93 0.87 0.82 0.79 0.74 0.69
1500 2.92 2.75 2.60 2.51 2.36 2.22 2.10 1.98 1.89 1.78 1.67
1000 1.95 1.84 1.73 1.67 1.58 1.48 1.40 1.32 1.26 1.19 1.11
750 1.46 1.38 1.30 1.25 1.18 1.11 1.05 0.99 0.95 0.89 0.83
1500 3.51 3.30 3.12 3.01 2.84 2.67 2.52 2.37 2.27 2.14 2.00
1000 2.34 2.20 2.08 2.01 1.89 1.78 1.68 1.58 1.52 1.42 1.33
750 1.75 1.65 1.56 1.51 1.42 1.33 1.26 1.19 1.14 1.07 1.00
1500 5.02 4.73 4.46 4.31 4.06 3.81 3.60 3.39 3.25 3.06 2.86
1000 3.35 3.15 2.97 2.87 2.71 2.54 2.40 2.26 2.17 2.04 1.91
750 2.51 2.36 2.23 2.15 2.03 1.91 1.80 1.70 1.63 1.53 1.43
1500 6.82 6.43 6.06 5.85 5.52 5.18 4.90 4.61 4.42 4.16 3.89
1000 4.55 4.28 4.04 3.90 3.68 3.46 3.27 3.08 2.95 2.77 2.59
750 3.41 3.21 3.03 2.93 2.76 2.59 2.45 2.31 2.21 2.08 1.95
1500 9.02 8.49 8.01 7.74 7.29 6.85 6.47 6.10 5.84 5.49 5.14
1000 6.01 5.66 5.34 5.16 4.86 4.57 4.32 4.06 3.89 3.66 3.43
750 4.51 4.25 4.00 3.87 3.64 3.43 3.24 3.05 2.92 2.75 2.57
1500 11.70 11.02 10.39 10.04 9.46 8.89 8.40 7.91 7.58 7.12 6.67
1000 7.80 7.34 6.93 6.69 6.30 5.93 5.60 5.27 5.05 4.75 4.45
750 5.85 5.51 5.19 5.02 4.73 4.44 4.20 3.95 3.79 3.56 3.34
1500 18.28 17.21 16.23 15.68 14.77 13.89 13.12 12.36 11.84 11.13 10.42
1000 12.18 11.48 10.82 10.45 9.85 9.26 8.75 8.24 7.90 7.42 6.95 750 9.14 8.61 8.12 7.84 7.39 6.94 6.56 6.18 5.92 5.57 5.21
1500 26.80 25.25 23.81 23.00 21.67 20.37 19.25 18.12 17.37 16.32 15.29
1000 17.87 16.83 15.87 15.33 14.45 13.58 12.83 12.08 11.58 10.88 10.19
750 13.40 12.62 11.90 11.50 10.83 10.18 9.62 9.06 8.68 8.16 7.64
1500 37.77 35.57 33.55 32.41 30.53 28.70 27.12 25.54 24.47 23.00 21.54
1000 25.18 23.72 22.36 21.61 20.35 19.13 18.08 17.02 16.32 15.34 14.36
750 18.88 17.79 16.77 16.20 15.27 14.35 13.56 12.77 12.24 11.50 10.77
1500 49.22 46.36 43.72 42.24 39.79 37.40 35.35 33.28 31.90 29.98 28.08
1000 32.82 30.91 29.14 28.16 26.53 24.93 23.56 22.19 21.26 19.99 18.72
750 24.61 23.18 21.86 21.12 19.90 18.70 17.67 16.64 15.95 14.99 14.04
1500 84.80 79.87 75.32 72.76 68.55 64.43 60.89 57.34 54.95 51.64 48.37
1000 56.53 53.25 50.21 48.51 45.70 42.96 40.60 38.22 36.63 34.43 32.25
750 42.40 39.93 37.66 36.38 34.28 32.22 30.45 28.67 27.47 25.82 24.19
1500 130.61 123.02 116.00 112.07 105.58 99.24 93.79 88.31 84.64 79.54 74.50
1000 87.07 82.01 77.34 74.71 70.39 66.16 62.53 58.87 56.42 53.03 49.67
750 65.31 61.51 58.00 56.04 52.79 49.62 46.89 44.15 42.32 39.77 37.25
1500 197.38 185.90 175.30 169.36 159.56 149.98 141.73 133.45 127.90 120.21 112.59
1000 131.58 123.93 116.87 112.91 106.37 99.98 94.49 88.97 85.27 80.14 75.06
750 98 69 92 95 87 65 84 68 79 78 74 99 70 87 66 73 63 95 60 10 56 29
200100
308200
465750
43125
63250
89125
116150
GREAVES PLANETARY QUADRUPLE REDUCTION RATINGS
n 1 rpm
REDUCTION RATIO
P in kW. MECHANICAL
Ratios 405 - 752
Size T 2 Nm
2070
5750
27600
8280
11845
16100
21275
6900
2760
4600
46095
225
225M
160
725
1093
1553
200
110
720
850
980
440
500
560
630
180
180M
125
140
3565
360
250
270
320
340
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
18/81
783 800 830 880 900 955 1005 1065 1095 1135 1160 1180
1500 0.10 0.10 0.10 0.09 0.09 0.08 0.08 0.07 0.07 0.07 0.07 0.07
1000 0.07 0.07 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.05 0.04
750 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.04 0.04 0.03 0.03 0.03
1500 0.16 0.16 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.11 0.11 0.11
1000 0.11 0.10 0.10 0.09 0.09 0.09 0.08 0.08 0.08 0.07 0.07 0.07
750 0.08 0.08 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.051500 0.24 0.23 0.23 0.21 0.21 0.20 0.19 0.18 0.17 0.17 0.16 0.16
1000 0.16 0.16 0.15 0.14 0.14 0.13 0.12 0.12 0.11 0.11 0.11 0.11
750 0.12 0.12 0.11 0.11 0.10 0.10 0.09 0.09 0.09 0.08 0.08 0.08
1500 0.34 0.33 0.32 0.30 0.30 0.28 0.27 0.25 0.24 0.23 0.23 0.23
1000 0.23 0.22 0.21 0.20 0.20 0.19 0.18 0.17 0.16 0.16 0.15 0.15
750 0.17 0.17 0.16 0.15 0.15 0.14 0.13 0.13 0.12 0.12 0.11 0.11
1500 0.45 0.44 0.43 0.40 0.39 0.37 0.35 0.33 0.32 0.31 0.31 0.30
1000 0.30 0.30 0.29 0.27 0.26 0.25 0.24 0.22 0.22 0.21 0.20 0.20
750 0.23 0.23 0.22 0.21 0.20 0.19 0.18 0.17 0.17 0.16 0.16 0.16
1500 0.60 0.59 0.57 0.54 0.53 0.50 0.47 0.44 0.43 0.42 0.41 0.40
1000 0.40 0.39 0.38 0.36 0.35 0.33 0.31 0.30 0.29 0.28 0.27 0.27
750 0.30 0.30 0.29 0.27 0.26 0.25 0.24 0.22 0.22 0.21 0.20 0.20
1500 0.78 0.76 0.74 0.70 0.68 0.64 0.61 0.57 0.56 0.54 0.53 0.52
1000 0.52 0.51 0.49 0.46 0.45 0.43 0.41 0.38 0.37 0.36 0.35 0.35
750 0.39 0.38 0.37 0.35 0.34 0.32 0.30 0.29 0.28 0.27 0.26 0.26
1500 1.01 0.99 0.95 0.90 0.88 0.83 0.79 0.74 0.72 0.70 0.68 0.671000 0.67 0.66 0.63 0.60 0.58 0.55 0.52 0.49 0.48 0.46 0.45 0.45
750 0.50 0.49 0.48 0.45 0.44 0.41 0.39 0.37 0.36 0.35 0.34 0.33
1500 1.26 1.23 1.19 1.12 1.10 1.03 0.98 0.93 0.90 0.87 0.85 0.84
1000 0.84 0.82 0.79 0.75 0.73 0.69 0.65 0.62 0.60 0.58 0.57 0.56
750 0.63 0.62 0.59 0.56 0.55 0.52 0.49 0.46 0.45 0.43 0.43 0.42
1500 1.51 1.48 1.43 1.35 1.32 1.24 1.18 1.11 1.08 1.04 1.02 1.00
1000 1.01 0.99 0.95 0.90 0.88 0.83 0.79 0.74 0.72 0.70 0.68 0.67
750 0.76 0.74 0.71 0.67 0.66 0.62 0.59 0.56 0.54 0.52 0.51 0.50
1500 1.81 1.78 1.71 1.61 1.58 1.49 1.41 1.33 1.30 1.25 1.23 1.20
1000 1.21 1.18 1.14 1.08 1.05 0.99 0.94 0.89 0.87 0.83 0.82 0.80
750 0.91 0.89 0.86 0.81 0.79 0.74 0.71 0.67 0.65 0.63 0.61 0.60
1500 2.60 2.54 2.45 2.31 2.26 2.13 2.02 1.91 1.86 1.79 1.75 1.72
1000 1.73 1.69 1.63 1.54 1.51 1.42 1.35 1.27 1.24 1.19 1.17 1.15
750 1.30 1.27 1.22 1.16 1.13 1.06 1.01 0.95 0.93 0.90 0.88 0.86
1500 3.53 3.45 3.33 3.14 3.07 2.89 2.75 2.59 2.52 2.43 2.38 2.34
1000 2.35 2.30 2.22 2.09 2.05 1.93 1.83 1.73 1.68 1.62 1.59 1.56750 1.76 1.73 1.66 1.57 1.54 1.45 1.37 1.30 1.26 1.22 1.19 1.17
1500 4.66 4.56 4.40 4.15 4.06 3.82 3.63 3.43 3.33 3.22 3.15 3.09
1000 3.11 3.04 2.93 2.77 2.70 2.55 2.42 2.29 2.22 2.14 2.10 2.06
750 2.33 2.28 2.20 2.07 2.03 1.91 1.82 1.71 1.67 1.61 1.57 1.55
1500 6.05 5.92 5.71 5.38 5.26 4.96 4.71 4.45 4.33 4.17 4.08 4.01
1000 4.03 3.95 3.80 3.59 3.51 3.31 3.14 2.97 2.88 2.78 2.72 2.68
750 3.02 2.96 2.85 2.69 2.63 2.48 2.36 2.22 2.16 2.09 2.04 2.01
1500 9.45 9.25 8.92 8.41 8.22 7.75 7.36 6.95 6.76 6.52 6.38 6.27
1000 6.30 6.17 5.95 5.61 5.48 5.17 4.91 4.63 4.51 4.35 4.25 4.18
750 4.73 4.63 4.46 4.21 4.11 3.88 3.68 3.47 3.38 3.26 3.19 3.14
1500 13.86 13.57 13.08 12.34 12.06 11.37 10.80 10.19 9.91 9.56 9.36 9.20
1000 9.24 9.05 8.72 8.22 8.04 7.58 7.20 6.80 6.61 6.38 6.24 6.13
750 6.93 6.78 6.54 6.17 6.03 5.68 5.40 5.10 4.96 4.78 4.68 4.60
1500 19.54 19.12 18.43 17.38 17.00 16.02 15.22 14.36 13.97 13.48 13.19 12.96
1000 13.02 12.75 12.29 11.59 11.33 10.68 10.15 9.58 9.31 8.98 8.79 8.64
750 9.77 9.56 9.21 8.69 8.50 8.01 7.61 7.18 6.98 6.74 6.59 6.481500 25.46 24.92 24.02 22.65 22.15 20.87 19.84 18.72 18.21 17.56 17.19 16.89
1000 16.97 16.61 16.01 15.10 14.77 13.92 13.22 12.48 12.14 11.71 11.46 11.26
750 12.73 12.46 12.01 11.33 11.08 10.44 9.92 9.36 9.10 8.78 8.59 8.45
1500 43.86 42.93 41.38 39.03 38.16 35.96 34.17 32.25 31.36 30.26 29.61 29.10
1000 29.24 28.62 27.59 26.02 25.44 23.97 22.78 21.50 20.91 20.17 19.74 19.40
750 21.93 21.46 20.69 19.51 19.08 17.98 17.09 16.12 15.68 15.13 14.80 14.55
1500 67.56 66.12 63.73 60.11 58.77 55.39 52.63 49.67 48.31 46.61 45.60 44.83
1000 45.04 44.08 42.49 40.07 39.18 36.93 35.09 33.11 32.21 31.07 30.40 29.89
750 33.78 33.06 31.87 30.06 29.39 27.69 26.32 24.83 24.15 23.30 22.80 22.41
1500 102.09 99.92 96.31 90.84 88.82 83.70 79.54 75.06 73.00 70.43 68.91 67.74
1000 68.06 66.61 64.21 60.56 59.21 55.80 53.03 50.04 48.67 46.95 45.94 45.16
750 51.05 49.96 48.16 45.42 44.41 41.85 39.77 37.53 36.50 35.21 34.46 33.87
Check with factory for requirements of forced lubrication before offering.
850 308200
980 465750
630 116150
720 200100
500 63250
560 89125
360 27600
440 43125
320 16100
340 21275
250 8280
270 11845
225 5750
225M 6900
460
725
1093
140 1553
GREAVES PLANETARY QUADRUPLE REDUCTION RATINGS
95
110
125
REDUCTION RATIO
P in kW MECHANICAL
Ratios 783 - 1180
SIZE T2 Nm n 1 rpm
180M 3565
200 4600
160 2070
180 2760
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
19/81
1210 1230 1250 1285 1330 1360 1410 1445 1495 1575 1665 1770
1500 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.04
1000 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.03 0.03
750 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.02 0.02
1500 0.10 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08 0.07 0.07
1000 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.05 0.05
750 0.05 0.05 0.05 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.04 0.04
1500 0.15 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.13 0.13 0.11 0.11
1000 0.10 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.07
750 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.05
1500 0.22 0.22 0.21 0.21 0.20 0.20 0.19 0.18 0.18 0.18 0.16 0.15
1000 0.15 0.14 0.14 0.14 0.13 0.13 0.13 0.12 0.12 0.12 0.11 0.10
750 0.11 0.11 0.11 0.10 0.10 0.10 0.09 0.09 0.09 0.09 0.08 0.08
1500 0.29 0.29 0.28 0.28 0.27 0.26 0.25 0.25 0.24 0.24 0.21 0.20
1000 0.20 0.19 0.19 0.18 0.18 0.17 0.17 0.16 0.16 0.16 0.14 0.13
750 0.15 0.15 0.15 0.14 0.14 0.13 0.13 0.13 0.12 0.12 0.11 0.10
1500 0.39 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 0.28 0.27
1000 0.26 0.26 0.25 0.25 0.24 0.23 0.22 0.22 0.21 0.21 0.19 0.18
750 0.20 0.19 0.19 0.18 0.18 0.17 0.17 0.16 0.16 0.16 0.14 0.13
1500 0.51 0.50 0.49 0.48 0.46 0.45 0.43 0.42 0.41 0.41 0.37 0.35
1000 0.34 0.33 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 0.24 0.23
750 0.25 0.25 0.24 0.24 0.23 0.22 0.22 0.21 0.20 0.21 0.18 0.171500 0.65 0.64 0.63 0.61 0.59 0.58 0.56 0.55 0.53 0.54 0.47 0.45
1000 0.43 0.43 0.42 0.41 0.40 0.39 0.37 0.36 0.35 0.36 0.32 0.30
750 0.33 0.32 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.27 0.24 0.22
1500 0.82 0.80 0.79 0.77 0.74 0.73 0.70 0.68 0.66 0.67 0.59 0.56
1000 0.54 0.53 0.53 0.51 0.49 0.48 0.47 0.46 0.44 0.45 0.40 0.37
750 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 0.30 0.28
1500 0.98 0.96 0.95 0.92 0.89 0.87 0.84 0.82 0.79 0.80 0.71 0.67
1000 0.65 0.64 0.63 0.61 0.59 0.58 0.56 0.55 0.53 0.54 0.47 0.45
750 0.49 0.48 0.47 0.46 0.45 0.44 0.42 0.41 0.40 0.40 0.36 0.33
1500 1.17 1.16 1.14 1.11 1.07 1.04 1.01 0.98 0.95 0.96 0.85 0.80
1000 0.78 0.77 0.76 0.74 0.71 0.70 0.67 0.66 0.63 0.64 0.57 0.54
750 0.59 0.58 0.57 0.55 0.53 0.52 0.50 0.49 0.48 0.48 0.43 0.40
1500 1.68 1.65 1.63 1.58 1.53 1.49 1.44 1.41 1.36 1.38 1.22 1.15
1000 1.12 1.10 1.08 1.05 1.02 1.00 0.96 0.94 0.91 0.92 0.81 0.77
750 0.84 0.83 0.81 0.79 0.76 0.75 0.72 0.70 0.68 0.69 0.61 0.57
1500 2.28 2.25 2.21 2.15 2.08 2.03 1.96 1.91 1.85 1.87 1.66 1.56
1000 1.52 1.50 1.47 1.43 1.39 1.35 1.31 1.27 1.23 1.25 1.11 1.04
750 1.14 1.12 1.11 1.08 1.04 1.02 0.98 0.96 0.92 0.94 0.83 0.78
1500 3.02 2.97 2.92 2.84 2.75 2.68 2.59 2.53 2.44 2.48 2.19 2.06
1000 2.01 1.98 1.95 1.89 1.83 1.79 1.73 1.68 1.63 1.65 1.46 1.38
750 1.51 1.48 1.46 1.42 1.37 1.34 1.29 1.26 1.22 1.24 1.10 1.03
1500 3.91 3.85 3.79 3.69 3.56 3.48 3.36 3.28 3.17 3.21 2.85 2.68
1000 2.61 2.57 2.53 2.46 2.37 2.32 2.24 2.19 2.11 2.14 1.90 1.78
750 1.96 1.93 1.89 1.84 1.78 1.74 1.68 1.64 1.58 1.61 1.42 1.34
1500 6.12 6.02 5.92 5.76 5.57 5.44 5.25 5.12 4.95 5.02 4.45 4.18
1000 4.08 4.01 3.95 3.84 3.71 3.63 3.50 3.41 3.30 3.35 2.96 2.79
750 3.06 3.01 2.96 2.88 2.78 2.72 2.62 2.56 2.48 2.51 2.22 2.09
1500 8.97 8.83 8.68 8.45 8.16 7.98 7.70 7.51 7.26 7.36 6.52 6.13
1000 5.98 5.88 5.79 5.63 5.44 5.32 5.13 5.01 4.84 4.91 4.35 4.09
750 4.49 4.41 4.34 4.22 4.08 3.99 3.85 3.76 3.63 3.68 3.26 3.07
1500 12.64 12.44 12.24 11.90 11.50 11.25 10.85 10.59 10.23 10.37 9.19 8.641000 8.43 8.29 8.16 7.94 7.67 7.50 7.23 7.06 6.82 6.91 6.12 5.76
750 6.32 6.22 6.12 5.95 5.75 5.62 5.42 5.29 5.12 5.19 4.59 4.32
1500 16.48 16.21 15.95 15.51 14.99 14.66 14.14 13.80 13.33 13.52 11.97 11.2
1000 10.98 10.80 10.63 10.34 9.99 9.77 9.43 9.20 8.89 9.01 7.98 7.51
750 8.24 8.10 7.97 7.76 7.49 7.33 7.07 6.90 6.67 6.76 5.99 5.63
1500 28.38 27.92 27.47 26.73 25.82 25.25 24.36 23.77 22.97 23.28 20.63 19.4
1000 18.92 18.61 18.32 17.82 17.21 16.84 16.24 15.84 15.31 15.52 13.75 12.94
750 14.19 13.96 13.74 13.36 12.91 12.63 12.18 11.88 11.49 11.64 10.31 9.70
1500 43.72 43.01 42.32 41.17 39.77 38.89 37.52 36.61 35.38 35.86 31.77 29.8
1000 29.14 28.67 28.21 27.44 26.51 25.93 25.01 24.40 23.59 23.91 21.18 19.9
750 21.86 21.50 21.16 20.58 19.89 19.45 18.76 18.30 17.69 17.93 15.89 14.94
1500 66.06 64.99 63.95 62.21 60.10 58.78 56.69 55.32 53.47 54.20 48.01 45.1
1000 44.04 43.33 42.63 41.47 40.07 39.19 37.80 36.88 35.65 36.13 32.01 30.1
750 33.03 32.50 31.98 31.10 30.05 29.39 28.35 27.66 26.74 27.10 24.01 22.5
125 1093
95 460
110 725
GREAVES PLANETARY QUADRUPLE REDUCTION RATINGS
Ratios 1210 - 1770
T2 Nm n 1 rpmSIZE
REDUCTION RATIO
P in kW MECHANICAL
140 1553
180 2760
160 2070
180M 3565
200 4600
225 5750
225M 6900
250 8280
270 11845
320 16100
340 21275
360 27600
630 116150
440 43125
500 63250
560 89125
980 465750
720 200100
850 308200
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
20/81
5.0 5.7 6.0 6.3 6.7
1500 1.79 1.58 1.49 1.43 1.33
1000 1.19 1.05 0.99 0.95 0.89
750 0.90 0.79 0.75 0.71 0.66
1500 2.13 1.88 1.77 1.69 1.58
1000 1.42 1.25 1.18 1.13 1.05
750 1.06 0.94 0.89 0.85 0.79
1500 4.10 3.62 3.42 3.27 3.05
1000 2.74 2.41 2.28 2.18 2.03
750 2.05 1.81 1.71 1.63 1.52
1500 8.21 7.24 6.84 6.53 6.09
1000 5.47 4.83 4.56 4.36 4.06
750 4.10 3.62 3.42 3.27 3.05
1500 13.80 12.18 11.50 10.99 10.25
1000 9.20 8.12 7.67 7.33 6.83
750 6.90 6.09 5.75 5.49 5.12
1500 22.38 19.75 18.65 17.82 16.62
1000 14.92 13.17 12.43 11.88 11.08
750 11.19 9.87 9.33 8.91 8.31
1500 31.71 27.98 26.42 25.24 23.55
1000 21.14 18.65 17.62 16.83 15.70
750 15.85 13.99 13.21 12.62 11.77
1500 44.76 39.50 37.30 35.64 33.24
1000 29.84 26.33 24.87 23.76 22.16
750 22.38 19.75 18.65 17.82 16.62
1500 59.68 52.66 49.74 47.52 44.32
1000 39.79 35.11 33.16 31.68 29.55
750 29.84 26.33 24.87 23.76 22.16
1500 82.07 72.41 68.39 65.34 60.94
1000 54.71 48.27 45.59 43.56 40.63
750 41.03 36.21 34.19 32.67 30.47
1500 104.45 92.16 87.04 83.16 77.56
1000 69.63 61.44 58.03 55.44 51.71
750 52.22 46.08 43.52 41.58 38.78
1500 134.29 118.49 111.91 106.92 99.72
1000 89.53 78.99 74.61 71.28 66.48
750 67.14 59.25 55.95 53.46 49.86
1500 160.40 141.53 133.67 127.71 119.11
1000 106.93 94.35 89.11 85.14 79.41
750 80.20 70.77 66.83 63.85 59.561500 205.16 181.03 170.97 163.35 152.35
1000 136.78 120.69 113.98 108.90 101.57
750 102.58 90.51 85.49 81.67 76.18
1500 242.47 213.94 202.06 193.05 180.05
1000 161.64 142.63 134.70 128.70 120.03
750 121.23 106.97 101.03 96.52 90.03
1500 328.26 289.64 273.55 261.36 243.76
1000 218.84 193.10 182.37 174.24 162.51
750 164.13 144.82 136.78 130.68 121.88
1500 428.98 378.51 357.48 341.55 318.55
1000 285.99 252.34 238.32 227.70 212.37
750 214.49 189.26 178.74 170.77 159.28
1500 596.84 526.63 497.37 475.19 443.20
1000 397.90 351.08 331.58 316.80 295.47
750 298 42 263 31 248 68 237 60 221 60
345L
1380
GREAVES BEVEL PLANETARY SINGLE REDUCTION RATINGS
SpecialsonEnquiry
690
175L 978
155L
19.6
21.4
25.37
Ratios 5 - 6.7
7475
66
100L 127
140L 426
110L
240L
200L
P.in. kW. Mechanical
Size T2 Nm n1 rpm
REDUCTION RATIOP. kW
Thermal
>P.kW.Mech
390L 10120
253
65L 55
70L
220L 1840
8.81
13.33
15.33
17.67
2530
305L 4945
330L 6325
32.37270L 3220
285L 4140 35.27
440L 13225
480L 18400
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
21/81
7.5 8.3 8.9 9.6 10.1
1500 3.21 2.91 2.72 2.53 2.401000 2.14 1.94 1.81 1.68 1.60
750 1.60 1.45 1.36 1.26 1.20
1500 3.95 3.58 3.35 3.11 2.95
1000 2.63 2.39 2.23 2.07 1.97
750 1.97 1.79 1.68 1.55 1.48
1500 7.89 7.16 6.70 6.22 5.91
1000 5.26 4.77 4.47 4.14 3.94
750 3.95 3.58 3.35 3.11 2.95
1500 14.80 13.43 12.56 11.66 11.07
1000 9.87 8.95 8.38 7.77 7.38
750 7.40 6.71 6.28 5.83 5.54
1500 24.67 22.38 20.94 19.43 18.45
1000 16.45 14.92 13.96 12.95 12.30750 12.34 11.19 10.47 9.71 9.23
1500 39.47 35.81 33.51 31.09 29.53
1000 26.32 23.87 22.34 20.72 19.68
750 19.74 17.91 16.75 15.54 14.76
1500 59.21 53.72 50.26 46.63 44.29
1000 39.47 35.81 33.51 31.09 29.53
750 29.61 26.86 25.13 23.31 22.15
1500 81.41 73.86 69.10 64.11 60.90
1000 54.28 49.24 46.07 42.74 40.60
750 40.71 36.93 34.55 32.06 30.45
1500 111.02 100.72 94.23 87.43 83.05
1000 74.01 67.14 62.82 58.29 55.36
750 55.51 50.36 47.12 43.71 41.52
1500 148.03 134.29 125.65 116.57 110.73
1000 98.68 89.53 83.76 77.71 73.82
750 74.01 67.14 62.82 58.29 55.36
1500 192.43 174.58 163.34 151.54 143.95
1000 128.29 116.38 108.89 101.03 95.96
750 96.22 87.29 81.67 75.77 71.97
1500 241.78 219.34 205.22 190.40 180.85
1000 161.18 146.23 136.81 126.93 120.57
750 120.89 109.67 102.61 95.20 90.43
1500 305.92 277.53 259.67 240.91 228.84
1000 203.95 185.02 173.11 160.61 152.56
750 152.96 138.77 129.83 120.46 114.421500 370.07 335.72 314.11 291.43 276.82
1000 246.71 223.82 209.41 194.28 184.54
750 185.03 167.86 157.06 145.71 138.41
1500 444.08 402.87 376.94 349.71 332.18
1000 296.05 268.58 251.29 233.14 221.45
750 222.04 201.43 188.47 174.86 166.09
1500 616.78 559.54 523.52 485.71 461.36
1000 411.18 373.03 349.01 323.81 307.57
750 308.39 279.77 261.76 242.86 230.68
1500 838.82 760.97 711.99 660.57 627.45
1000 559.21 507.32 474.66 440.38 418.30
750 419.41 380.49 355.99 330.28 313.73
1500 1085.53 984.79 921.40 854.85 812.001000 723.69 656.53 614.27 569.90 541.33
750 542 76 492 40 460 70 427 43 406 00
270M 2760
184
140M 368
220M 1150
240M
>P.kW.Mech
17.67
GREAVES BEVEL PLANETARY SINGLE REDUCTION RATINGS
1840
REDUCTION RATIO
Ratios 7.5 - 10.1
P. kW
ThermalP.in. kW. Mechanical
Size T2 Nm n1 rpm
345M 5175
305M 3795
690
100M 150
110M
175M
19.6
25.37
32.37
38.06
58
560M 20700
390M
Specialson
Enq
uiry
520M 17250
670M 39100
750M
6900
480M 14260
50600
420M 8970
440M 11270
610M 28750
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
22/81
10.7 11.6 12.5 13.6
1500 2.96 2.72 2.52 2.321000 1.97 1.81 1.68 1.55
750 1.48 1.36 1.26 1.16
1500 3.65 3.36 3.12 2.86
1000 2.44 2.24 2.08 1.91
750 1.83 1.68 1.56 1.43
1500 7.31 6.72 6.23 5.73
1000 4.87 4.48 4.15 3.82
750 3.65 3.36 3.12 2.86
1500 13.05 12.00 11.13 10.23
1000 8.70 8.00 7.42 6.82
750 6.52 6.00 5.56 5.11
1500 23.49 21.61 20.03 18.41
1000 15.66 14.40 13.35 12.27
750 11.74 10.80 10.01 9.20
1500 36.54 33.61 31.15 28.63
1000 24.36 22.41 20.77 19.09
750 18.27 16.81 15.58 14.32
1500 53.94 49.62 45.99 42.27
1000 35.96 33.08 30.66 28.18
750 26.97 24.81 22.99 21.13
1500 76.55 70.42 65.27 59.99
1000 51.04 46.95 43.51 39.99
750 38.28 35.21 32.63 29.99
1500 104.39 96.03 89.00 81.80
1000 69.59 64.02 59.34 54.54
750 52.20 48.02 44.50 40.90
1500 139.19 128.04 118.67 109.07
1000 92.79 85.36 79.11 72.71
750 69.59 64.02 59.34 54.54
1500 182.69 168.05 155.76 143.16
1000 121.79 112.04 103.84 95.44
750 91.34 84.03 77.88 71.58
1500 217.48 200.06 185.43 170.43
1000 144.99 133.38 123.62 113.62
750 108.74 100.03 92.71 85.21
1500 278.38 256.08 237.34 218.14
1000 185.59 170.72 158.23 145.43
750 139.19 128.04 118.67 109.071500 339.27 312.10 289.26 265.86
1000 226.18 208.07 192.84 177.24
750 169.64 156.05 144.63 132.93
1500 408.87 376.12 348.60 320.40
1000 272.58 250.75 232.40 213.60
750 204.43 188.06 174.30 160.20
1500 574.16 528.17 489.52 449.92
1000 382.77 352.11 326.35 299.95
750 287.08 264.09 244.76 224.96
1500 791.64 728.23 674.95 620.35
1000 527.76 485.49 449.97 413.57
750 395.82 364.12 337.47 310.17
1500 1026.52 944.30 875.21 804.41
1000 684.35 629.54 583.47 536.27
750 513 26 472 15 437 60 402 20
REDUCTION RATIO
Specialsonenq
uiry
14375
700H 22425
940H 52325
>P.k
W.
Mech
9200
240H 863
2415
390H
1080H 67850
560H
1553
750H 27025
870H 37950
520H
420H 5060
12075
610H
n1 rpm
670H 18400
140H 196
155H 242
200H 483
285H
GREAVES BEVEL PLANETARY SINGLE REDUCTION RATINGS
3565
330H
480H 6900
Ratios 10.7 - 13.6
P. kW
ThermalP.in. kW. Mechanical
Size T2 Nm
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
23/81
19 27 33 36 40 44 47 51
1500 1.70 1.19 0.95 0.88 0.79 0.72 0.68 0.62
1000 1.13 0.79 0.63 0.59 0.53 0.48 0.45 0.42
750 0.85 0.59 0.47 0.44 0.40 0.36 0.34 0.31
1500 3.18 2.23 1.78 1.65 1.48 1.35 1.27 1.17
1000 2.12 1.48 1.19 1.10 0.99 0.90 0.85 0.78
750 1.59 1.11 0.89 0.82 0.74 0.67 0.64 0.59
1500 5.83 4.08 3.26 3.02 2.72 2.47 2.33 2.15
1000 3.89 2.72 2.18 2.02 1.81 1.65 1.55 1.43
750 2.92 2.04 1.63 1.51 1.36 1.24 1.17 1.07
1500 9.01 6.31 5.05 4.67 4.20 3.82 3.60 3.32
1000 6.01 4.20 3.36 3.11 2.80 2.55 2.40 2.21
750 4.51 3.15 2.52 2.34 2.10 1.91 1.80 1.66
1500 13.25 9.28 7.42 6.87 6.18 5.62 5.30 4.88
1000 8.83 6.18 4.95 4.58 4.12 3.75 3.53 3.25
750 6.43 4.50 3.60 3.34 3.00 2.73 2.57 2.37
1500 19.08 13.36 10.69 9.89 8.90 8.09 7.63 7.03
1000 12.72 8.90 7.12 6.60 5.94 5.40 5.09 4.69
750 9.54 6.68 5.34 4.95 4.45 4.05 3.82 3.51
1500 26.50 18.55 14.84 13.74 12.37 11.24 10.60 9.76
1000 17.67 12.37 9.89 9.16 8.24 7.50 7.07 6.51
750 13.25 9.28 7.42 6.87 6.18 5.62 5.30 4.88
1500 33.92 23.74 19.00 17.59 15.83 14.39 13.57 12.50
1000 22.61 15.83 12.66 11.73 10.55 9.59 9.05 8.33
750 16.96 11.87 9.50 8.79 7.91 7.20 6.78 6.25
1500 45.58 31.91 25.53 23.63 21.27 19.34 18.23 16.79
1000 30.39 21.27 17.02 15.76 14.18 12.89 12.15 11.20
750 22.79 15.95 12.76 11.82 10.64 9.67 9.12 8.40
1500 57.24 40.07 32.06 29.68 26.71 24.28 22.90 21.09
1000 38.16 26.71 21.37 19.79 17.81 16.19 15.26 14.06
750 28.62 20.03 16.03 14.84 13.36 12.14 11.45 10.541500 71.02 49.72 39.77 36.83 33.14 30.13 28.41 26.17
1000 47.35 33.14 26.51 24.55 22.10 20.09 18.94 17.44
750 35.51 24.86 19.89 18.41 16.57 15.07 14.20 13.08
1500 84.80 59.36 47.49 43.97 39.57 35.98 33.92 31.24
1000 56.53 39.57 31.66 29.31 26.38 23.98 22.61 20.83
750 42.40 29.68 23.74 21.99 19.79 17.99 16.96 15.62
1500 103.88 72.72 58.17 53.87 48.48 44.07 41.55 38.27
1000 69.26 48.48 38.78 35.91 32.32 29.38 27.70 25.52
750 51.94 36.36 29.09 26.93 24.24 22.04 20.78 19.14
1500 148.40 103.88 83.11 76.95 69.26 62.96 59.36 54.68
1000 98.94 69.26 55.40 51.30 46.17 41.97 39.57 36.45
750 74.20 51.94 41.55 38.48 34.63 31.48 29.68 27.34
1500 196.11 137.27 109.82 101.68 91.52 83.20 78.44 72.25
1000 130.74 91.52 73.21 67.79 61.01 55.46 52.29 48.17
750 98.05 68.64 54.91 50.84 45.76 41.60 39.22 36.12
1500 254.41 178.08 142.47 131.91 118.72 107.93 101.76 93.73
1000 169.60 118.72 94.98 87.94 79.15 71.95 67.84 62.49
750 127.20 89.04 71.23 65.96 59.36 53.97 50.88 46.86
1500 339.21 237.45 189.96 175.89 158.30 143.91 135.68 124.97
1000 226.14 158.30 126.64 117.26 105.53 95.94 90.46 83.31
750 169.60 118.72 94.98 87.94 79.15 71.95 67.84 62.49
1500 524.71 367.30 293.84 272.07 244.87 222.61 209.89 193.32
1000 349.81 244.87 195.89 181.38 163.24 148.40 139.92 128.88
750 262.36 183.65 146.92 136.04 122.43 111.30 104.94 96.66
1500 773.82 541.67 433.34 401.24 361.12 328.29 309.53 285.09
1000 515.88 361.12 288.89 267.49 240.74 218.86 206.35 190.06
750 386.91 270.84 216.67 200.62 180.56 164.14 154.76 142.55
1500 1091.83 764.28 611.42 566.13 509.52 463.20 436.73 402.25
1000 727.89 509.52 407.62 377.42 339.68 308.80 291.15 268.17
750 545.91 382.14 305.71 283.07 254.76 231.60 218.37 201.13
83950
118450
36800
16100
56925
21275
27600
GREAVES BEVEL PLANETARY DOUBLE REDUCTION RATINGS
633
978
180 1438
110
140
160
P.kW
Thermal
Ratios 19 - 51
184
345
Size T2 Nm n1 rpm
P in kW.MECHANICAL
REDUCTION RATIO
95
>P2.
Mechanical
forthermalratingcapacitiesandforced
co
olingrequirements'
37.36
47.15
53.82
55.19
25.09
800
12.8
27.79
33.9
14.76
18.37
20.73
4945
500
560
630
720
440
250
270
290
320
3680
340
360
400
6210
7705
9200
11270
200
225
2070
2875
8/22/2019 PREMIUM_PLANETARY GEARS.pdf
24/81
Ratios 55 - 85
55 60 63 67 73 77 80 85
1500 0.58 0.53 0.51 0.47 0.43 0.41 0.40 0.37
1000 0.39 0.35 0.34 0.32 0.29 0.27 0.26 0.25
750 0.29 0.26 0.25 0.24 0.22 0.20 0.20 0.19
1500 1.09 0.99 0.95 0.89 0.81 0.77 0.74 0.70
1000 0.72 0.66 0.63 0.59 0.54 0.51 0.49 0.46
750 0.54 0.49 0.47 0.45 0.40 0.38 0.37 0.351500 1.99 1.81 1.74 1.63 1.48 1.41 1.36 1.28
1000 1.33 1.21 1.16 1.09 0.99 0.94 0.91 0.85
750 1.00 0.91 0.87 0.82 0.74 0.70 0.68 0.64
1500 3.08 2.80 2.68 2.52 2.29 2.17 2.10 1.97
1000 2.05 1.87 1.79 1.68 1.53 1.45 1.40 1.31
750 1.54 1.40 1.34 1.26 1.15 1.09 1.05 0.99
1500 4.52 4.12 3.95 3.71 3.37 3.20 3.09 2.90
1000 3.02 2.75 2.63 2.47 2.25 2.13 2.06 1.93
750 2.20 2.00 1.92 1.80 1.64 1.55 1.50 1.41
1500 6.52 5.94 5.68 5.34 4.86 4.61 4.45 4.17
1000 4.34 3.96 3.79 3.56 3.24 3.07 2.97 2.78
750 3.26 2.97 2.84 2.67 2.43 2.30 2.23 2.09
1500 9.05 8.24 7.89 7.42 6.75 6.40 6.18 5.80
1000 6.03 5.50 5.26 4.95 4.50 4.26 4.12 3.86
750 4.52 4.12 3.95 3.71 3.37 3.20 3.09 2.90
1500 11.58 10.55 10.10 9.50 8.63 8.19 7.91 7.42
1000 7.72 7.04 6.74 6.33 5.76 5.46 5.28 4.95
750 5.79 5.28 5.05 4.75 4.32 4.09 3.96 3.71
1500 15.56 14.18 13.58 12.76 11.60 11.00 10.64 9.97
1000 10.38 9.45 9.05 8.51 7.73 7.33 7.09 6.65
750 7.78 7.09 6.79 6.38 5.80 5.50 5.32 4.99
1500 19.55 17.81 17.05 16.03 14.57 13.82 13.36 12.52
1000 13.03 11.87 11.37 10.69 9.71 9.21 8.90 8.35
750 9.77 8.90 8.53 8.01 7.29 6.91 6.68 6.26
1500 24.25 22.10 21.16 19.89 18.08 17.14 16.57 15.54
1000 16.17 14.73 14.10 13.26 12.05 11.43 11.05 10.36
750 12.13 11.05 10.58 9.94 9.04 8.57 8.29 7.77
1500 28.96 26.38 25.26 23.74 21.59 20.47 19.79 18.55
1000 19.30 17.59 16.84 15.83 14.39 13.65 13.19 12.37750 14.48 13.19 12.63 11.87 10.79 10.23 9.89 9.28
1500 35.47 32.32 30.94 29.09 26.44 25.08 24.24 22.72
1000 23.65 21.55 20.63 19.39 17.63 16.72 16.16 15.15
750 17.74 16.16 15.47 14.54 13.22 12.54 12.12 11.36
1500 50.67 46.17 44.21 41.55 37.78 35.82 34.63 32.46
1000 33.78 30.78 29.47 27.70 25.18 23.88 23.09 21.64
750 25.34 23.09 22.10 20.78 18.89 17.91 17.31 16.23
1500 66.96 61.01 58.41 54.91 49.92 47.34 45.76 42.90
1000 44.64 40.67 38.94 36.61 33.28 31.56 30.51 28.60
750 33.48 30.51 29.21 27.45 24.96 23.67 22.88 21.45
1500 86.87 79.15 75.78 71.23 64.76 61.41 59.36 55.65
1000 57.91 52.77 50.52 47.49 43.17 40.94 39.57 37.10
750 43.44 39.57 37.89 35.62 32.38 30.70 29.68 27.83
1500 115.83 105.53 101.04 94.98 86.34 81.88 79.15 74.20
1000 77.22 70.35 67.36 63.32 57.56 54.59 52.77 49.47
750 57.91 52.77 50.52 47.49 43.17 40.94 39.57 37.10
1500 179.17 163.24 156.30 146.92 133.56 126.66 122.43 114.78
1000 119.45 108.83 104.20 97.95 89.04 84.44 81.62 76.52
750 89.59 81.62 78.15 73.46 66.78 63.33 61.22 57.39
1500 264.23 240.74 230.50 216.67 196.97 186.78 180.56 169.27
1000 176.15 160.50 153.67 144.45 131.32 124.52 120.37 112.85
750 132.12 120.37 115.25 108.33 98.49 93.39 90.28 84.64
1500 372.82 339.68 325.23 305.71 277.92 263.55 254.76 238.84
1000 248.55 226.45 216.82 203.81 185.28 175.70 169.84 159.23
750 186.41 169.84 162.61 152.86 138.96 131.77 127.38 119.42
1500 503.13 458.40 438.90 412.56 375.06 355.66 343.80 322.32
1000 335.42 305.60 292.60 275.04 250.04 237.11 229.20 214.88
750 251.56 229.20 219.45 206.28 187.53 177.83 171.90 161.16
Bevel Units are not standard in this range. Can be offered on enquiry only.
2070
180 1437.5
110 345
140 633
160 978
4945
290 6210
225 2875
250 3680
270
4
Top Related