QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2
GLASS REINFORCED CONCRETE (GRC)
PITS & RISERS STEP IRONS CAN NOW BE INSTALLED IN GRC PITS AND RISERS
Whilst developing this product, we listened to the end user, who wanted the flexibility to install step irons before and
after installation. There are preformed holes in the back of the pit or riser, where you can install step irons before
or after back filling. This unique design gives customers flexibility and a fully compliant step iron installation.
The end user can choose to either use the pit with, or without step irons. If step irons are required, follow the steps
below.
BCP can always install your step irons for you, prior to delivery.
STEP INSTALLATION FOR GRC PITS AND RISERS
1. The position of the preformed holes are marked with blue dots #1
2. To complete the penetration into the pit, the front of the preformed holes need to be drilled out to complete the depth required for the step iron #2
3. Drill the holes on the inside of the pit wall using a 25mm drill bit #2
4. Mix Up equal parts of BCP 2 part Megapoxy #3 to a smooth grey paste #4
5. Place a reasonable amount of paste into the hole that you have drilled
6. Coat a small amount around the corrugated part of the step iron #5
7. Push the step iron in and gently tap the step iron in using a piece of timber to protect the plastic coating
8. Finish it off by smoothing around the step iron and the back of the pit or riser #6
#1 #2 #3 Part No. 8314160
#4 #5 Part No. 8505906 #6
Better Concrete Products Pty Ltd, ABN 77 685 113 842 trading as
BCP Precast, PO Box 537, Moorebank, NSW, 1875 Phone: 02 9612 5800 Fax: 02 9821 1031 Email: [email protected] Web: www.bcp.com.au
QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2
GLASS REINFORCED CONCRETE (GRC) BCP SETS NEW STANDARD IN LIGHT WEIGHT PITS
INTEGRATED LIFTING PINS
Our team of Qualified Engineers and Designers with experience from Civil Industry to Residential projects have
incorporated the concept of Australian Standard Approved “Swift Lift Pins”.
This allows for safer handling of GRC products in accordance with Occupational Health & Safety demands.
Swift lift inside GRC PIT Typical lifting of a GRC PIT
COMPLIANT STEP IRONS TO SUIT GRC PITS AND RISERS
For a long time there has never been a compliant answer to installing step irons into GRC and light weight pits.
BCP has modified its 900 & 1200 pit and riser moulds to accommodate “off the shelf” plastic encapsulated step
irons. These have been rigorously tested and are compliant with the latest Australian Standards 1657-2013
QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2
GLASS REINFORCED CONCRETE (GRC) PRODUCT RANGE
PIT SIZE PRODUCT
DESCRIPTION EXTERNAL
SIDE A EXTERNAL
SIDE B INTERNAL
HEIGHT
1.3 ton Lifting
Anchors
Holes for Step
Irons
MASS (kg)
ORDER CODE
300 x 300 Pit 335 335 260 12 PTAA-GRC0300
450 x 450
Pit 555 555 490 37 PTA-GRC0500
Riser 555 555
150 18 PRA-GRC0150
300 26 PRA-GRC0300
600 46 PRA-GRC0600
600 x 600
Pit 710 710 490 54 PTB-GRC0500
Riser 710 710
150 25 PRB-GRC0150
300 35 PRB-GRC0300
600 55 PRB-GRC0600
900 x 600
Pit 1010 710 750 YES 115 PTC-GRC0800
Riser 1010 710 300 38 PRC-GRC0300
600 YES 74 PRC-GRC0600
900 x 900
Pit 1010 1010 750 YES YES 158 PTD-GRC0800
Riser 1010 1010 300 YES YES 53 PRD-GRC0300
600 YES YES 91 PRD-GRC0600
1200 x 1200 Pit 1340 1340 870 YES YES 331 PTE-GRC0900
Riser 1340 1340 300 YES YES 126 PRE-GRC0300
NOTE: Drawing is not to scale, Dimensions are nominal and Weights are approximate, Subject to change
PIT SECTION VIEW PIT & RISER PLAN VIEW RISER SECTION
VIEW
Inte
rnal
Hei
ght
Inte
rnal
Hei
ght
A
B
QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2
Solid Top Gas Tight
Cover
(Duty M/D)
Hinge Grate in Concrete
Surround
(Duty M/D)
Concrete surrounds are rebated to suit GRC pits
Cover
thickness
GLASS REINFORCED CONCRETE (GRC)
GRATES and COVERS
PIT SIZE PRODUCT
DESCRIPTION EXTERNAL
SIZE CLEAR
OPENING MASS (kg)
DEPTH DUTY ORDER CODE
300 x 300 Drop-In Galvanised Grate 300 x 300 280 x 280 7 L/D GRC3030A
Drop-In Solid GRC Cover 300 x 300 280 x 280 10 P/D* PLAA-GRC
450 x 450
Drop-In Galvanised Grate
500 x 500 450 x 450
10
L/D GRC4949A
Drop-In Galvanised Grate 18 M/D GRC4949B
Drop-In Chequer plate 16 P/D* PLA-GRCGMS
Drop-In Solid GRC Cover 15 P/D* PLA-GRC
Gas Tight Cover in Concrete Surround
560 x 560 300 x 300 70 75 M/D PLA-GRCCICIN33B
600 x 600
Drop-In Galvanised Grate
650 x 650 600 x 600
18
L/D GRC6565A
Drop-In Galvanised Grate 30 M/D GRC6565B
Drop-In Chequer plate 29 P/D* PLB-GRCGMS
Drop-In Solid GRC Cover 27 P/D* PLB-GRC
Gas Tight Cover in Concrete Surround
710 x 710 450 x 450 105 75 L/D PLB-GRCCICIN44B
900 x 600
Drop-In Galvanised Grate
950 x 650 900 x 600
25
L/D GRC6595A
Drop-In Galvanised Grate 38 M/D GRC6595B
Drop-In Chequer plate 40 P/D* PLC-GRCGMS
Gas Tight Cover in Concrete Surround
1010 x 710 600 x 450 197 130 M/D PLC-GRCCICST64B
Hinged Gal Grate in Concrete Surround
1010 x 710 450 x 450 192 130 M/D PLC-GRCHSG44B
900 x 900
Drop-In Galvanised Grate
950 x 950 900 x 900
36
P/D* GRC9595A
Drop-In Galvanised Grate 56 L/D GRC9595B
Drop-In Chequer plate 57 P/D* PLD-GRCGMS
Gas Tight Cover in Concrete Surround
1010 x 1010 750 x 750 263 130 M/D PLD-GRCCICST77B
Hinged Gal Grate in Concrete Surround
1010 x 1010 600 x 600 254 130 M/D PLD-GRCHSG66B
1200 x 1200
Gas Tight Cover in Concrete Surround
1340 x 1340 900 x 900 505 150 M/D PLE-GRCCICST99B2P
Hinged Gal Grate in Concrete Surround
1340 x 1340 900 x 900 479 150 M/D PLE-GRCHSG99B
Note: Drawing is not to scale, Dimensions are nominal and Weights shown are estimates. Subject to change.
LOADING/DUTY P/D*= Pedestrian Only, L/D = Light Vehicle Traffic Only, M/D= Slow Moving Trucks Only.
TYPES OF COVERS AVAILABLE FOR GRC PITS AND RISERS
Phone: 02 9612 5800 Email: [email protected] Web: www.bcp.com.au
Drop-In GRC Cover
P/D* Drop-In Galvanised Grate
(Duty P/D* L/D, M/D)
Drop-In Chequer Plate
(Duty P/D*)
Top Related