REINVENTING
R
EINFORCIN
G
www.reinforcing.com
www.reinforcing. tv
Build with OneSteel Reinforcing
ALL THE REBAR, REOMESH® AND ACCESSORIES FOR ANY PROJECT BIG OR SMALL ARE INSIDE.
NATIONAL PRODUCT & SERVICES CATALOGUE
Contents
ECO-REO™ 3
Green Star® Steel Credit Points 4
ONEMESH® Reinforcing Mesh 5
UTEMESH® Reinforcing Mesh 6
ONEMESH® Trench Mesh 8
HANDIMESH® - General Purpose Mesh 9
IRONBARK® Stockyard Mesh 10
ONEMESH® Reinforcing Wire 12
500PLUS® Reinforcing Bar 13
Fabricated Z Cages 14
POOLSTEEL® 15
ACRS 16
SRIA 17
500PLUS® REBAR & REOMESH® 18
Threaded Bar 25
500PLUS® REBAR – Deformed 26
500PLUS® BAMTEC® Rollout Carpets 27
500PLUS® ROMTECH® Lattice Girders 28
Bar Chairs 29
Tie Wire 42
Steel Fixing Tools 44
Polythene Building Film 45
Tape 46
Dowels 47
Dowel Cradles 51
Dowel Sleeves 55
Safety Caps 57
Expansion Joints 59
Crack-A-Joint® 61
Crack Inducers 62
Key Joints 63
Polystyrene Pods 67
Decorative Products 69
Drainage & Ventilation 73
Lintels 74
Angles & Flats 76
Traditional Angels 78
RENDABAR® 79
Multi-Rib T-Bars 80
Traditional T-Bars 81
CAVI-T-BAR™ 82
500PLUS® REIDBAR™ & Accessories 83
Mechanical Splices 94
Headed Reinforcement 97
Pullout Bar Box 98
Bracing Systems 100
TRUSSDEK® Structural Decking 101
Construction Solutions 102
Metal Decking 103
Punching Shear Reinforcement 111
Formwork 112
Tools 113
Reinforced Concrete Thesaurus 125
Terms & Conditions 127
Notes 132
Branch Network 134
Please NoteUpdates, changes and additions to this catalogue can be accessed at www.reinforcing.com
REINFORCING.TVOur latest videos and case studies are right here to view on our new YouTube™ website. It’s here you’ll discover why so many projects big and small use OneSteel Reinforcing products.
Visit us now on www.reinforcing.tv
National Product & Services Catalogue 2011/2012
1Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
National Product & Services Catalogue 2011/2012
2Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
National Product & Services Catalogue 2011/2012
2
Specifi cations and Services
Delivery OfferThe OneSteel Reinforcing delivery offer is comprised of the following:
• Delivery to Site• Delivery Hours• Vehicles• First Drops• Order Lead Time• Return of Goods (Pick-ups)
To obtain the appropriate delivery offer in your area please contact your nearest OneSteel Reinforcing Branch.
Bundling500PLUS® Reinforcing bar is bundled with a maximum nominal mass of two tonnes per bundle unless otherwise requested. Content of rebar bundles is determined by OneSteel Reinforcing.
Special Bundling SizesSpecial bundling sizes are available – details on request.
Tolerances500PLUS® Reinforcing bar is cut and bent to the appropriate tolerances as per AS/NZS 4671 : 2001, Steel reinforcing materials and/or AS 3600 : 2009, Concrete structures. ONEMESH® Reinforcing mesh and wire is manufactured to AS/NZS 4671 : 2001.
Tolerances tighter than those specifi ed in AS 3600 : 2009 are possible and may incur an additional charge. Prices available on request.
Pre-Galvanized WirePurchasers should assess suitability for end-use applications.
Cut & Bent MeshONEMESH® Reinforcing Mesh and HANDIMESH® can be cut and/or bent to suit your specifi c requirements. Prices and delivery lead times available on application.
Mesh Made To OrderOneSteel Reinforcing can produce mesh to suit your particular requirements. For further details relating to prices, capability, minimum order quantities and delivery please contact your nearest OneSteel Reinforcing Branch.
PrefabricationPrefabrication of reinforcing steel is available. A complete OneSteel Reinforcing service, prefabrication of reinforcement assemblies for elements such as footings, columns or beams, takes place under factory conditions, maximising quality and reducing congestion on site. Pricing is determined based on your requirements and is available on request.
OneSteel Reinforcing SolutionsOneSteel Reinforcing manufacture and distribute a number of other products and construction systems such as 500PLUS®
BAMTEC®, TRUSSDEK®, 500PLUS® REIDBAR™ and 500PLUS®
ROMTECH®. Full details are available on request.
Construction AccessoriesA wide range of accessories are available our Branches.
Mechanical SplicingMechanical splicing services (threading and couplers) are available on request and are charged on a per unit basis.
Hot Dipped GalvanizedOneSteel Reinforcing can provide a high quality galvanizing service that meets AS/NZS 4534 : 1998, Zinc and zinc/aluminium-alloy coatings on steel wire.
Customer Pick-UpCustomers have the option of picking up goods from OneSteel Reinforcing Branches, which can save you time and money.
Scheduling & EstimatingOneSteel Reinforcing can offer scheduling and estimating services, including detailed take-offs from engineering and architectural drawings. Note: Charges may apply.
Saw CuttingOneSteel Reinforcing can offer an accurate and quality saw cutting service.
Lump Sum or Supply & FixFor selected projects, OneSteel Reinforcing is able to offer Lump Sum or Supply & Fix rates.
Please NoteTo improve our delivery service our sales staff would appreciate that you:
When ordering• Quote job reference number and product codes• When possible, fax or e-mail details of cut and/or bent bar
and mesh
For Delivery• Quote your order number, delivery site address, contact
name and phone number• Supply the nearest cross street and/or landmark to the site• Supply any other site access or opening and closing time
information
DisclaimerThe information contained in this publication is provided as a service to those interested in steel reinforcement. Since the information is provided for general guidance only, and in no way replaces the services of professional consultants on particular projects or subjects, no legal liability can be accepted by OneSteel Reinforcing for its use.
National Product & Services Catalogue 2011/2012
3Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
EC
O-R
EO
™
ECO-REO™ - Sustainable Reinforcing Products
OneSteel Reinforcing have introduced a range of ECO-REO™ products that offer builders and construction companies a range of REBAR, REOMESH® and Decking products that can provide a more sustainable use of materials in structures.
These products carry the additional branding of ECO-REO™, ECO-BAR™ or ECO-MESH™, as they can provide economic and environmental benefi ts compared to traditional reinforcing steels.
* ECONOMICAL The products can give more cost-effi cient cover and
economy in the number of sheets or bars, or the volumesof steel needed to effi ciently reinforce the structure and meet the design intent of the project
* ENVIRONMENTAL OneSteel’s manufacturing of reinforcing steel utilises
energy reducing polymer injection technology and recycled steel scrap content
OneSteel has introduced a number of initiatives in recent years to assist with more sustainable useof materials.
• The majority of OneSteel’s reinforcing bar and reinforcing mesh has been made from recycled scrap for many years – OneSteel announced on 10th June 2009 that the overall percentage of post-consumer recycled content (FY2008 average) was 89% for reinforcing bar and 66% for reinforcing mesh.
• OneSteel announced on 1st May 2010 that OneSteel’s improved energy-effi cient steel making process Polymer Injection Technology (PIT), used at the Rooty Hill, Sydney and Laverton, Melbourne electric arc furnaces has allowed OneSteel to achieve an average 66% of reinforcing rod for mesh and 82% of reinforcing bar produced using this technology. In operating this technology as standard practice at OneSteel’s Rooty Hill and Laverton steel mills, there is potential to recycle more than 285,000 car tyres per annum.
• OneSteel Reinforcing is supporting customers to have projects gain up to two Green Building Council of Australia (GBCA) Green Star® steel credits (revised scheme effective 29th April 2010) with enhanced capability to provide off site optimal fabrication of reinforcing steel used in the building structure.
* Supporting information on environmental claims for specifi c OneSteel Reinforcing ECO-REO™ products is given below and on the Technical Resources page of the OneSteel Reinforcing website www.reinforcing.com
PREFAB
ECO-BAR™ products include: • 500PLUS® BAMTEC® – Engineered reinforcing bar carpets can allow the size and
positioning of reinforcing steel to be optimised with variable diameters and spacings. • 5OOPLUS® PREFAB – Prefabricated reinforcement is a more effi cient process that
can be designed to generate less waste and scrap on site.
made to size
ECO-MESH™ products include:• Customised special run ONEMESH® can minimise duplication of reinforcing steel and
scrap losses that result from excess lapping and trimming of mesh sheets. • Engineered and tailored mesh solutions can include variable wire spacing and wire
diameters, and optimised mesh size (length and width). • The new UTEMESH® and the large (up to 9 x 3 m) ONEMESH® MADE TO SIZE sheets
give more cost effi cient cover and economy in the number of sheets used on projects.
TRUSSDEKECO-REO™ products include:• TRUSSDEK® is a unique patented long span steel decking system that serves as a
permanent formwork system, therefore eliminating other formwork. • Like reinforcing bar carpets and special meshes, TRUSSDEK® can optimise steel distribution
and steel intensity. • The amount of the steel reinforcing bars or mesh in a TRUSSDEK® slab can be up to 60% of
that used in a conventional one-way reinforced-concrete slab. • TRUSSDEK® panels can span up to 8.5 metres, which in steel-framed buildings can
potentially lead to the complete elimination of secondary steel beams.
National Product & Services Catalogue 2011/2012
4Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Gre
en
Star
®
Green Star® Steel Credit Points
• If customers talk to OneSteel Reinforcing in the early stages of the project we can suggest ways of redesigning the reinforcing such as spacing and diameters to optimise material use.
• This can improve the sustainability credentials of the project allowing the awarding of Green Star® steel credit points where appropriate as well as potentially reducing the costs of reinforcing steel in the project.
• OneSteel Reinforcing encourages the practice of moving product off site into prefabrication which fulfi ls the intent to reduce waste on site. This can provide the opportunity for dematerialisation and potentially speeding up construction, using our off site optimal fabrication techniques such as 500PLUS® BAMTEC®, 500PLUS® PREFAB and ONEMESH® MADE TO SIZE.
• OneSteel Reinforcing is keen to assist customers in making progress towards adopting more sustainable practices.
• OneSteel has a valid 14001 Environmental Management System in place.
• OneSteel is a member of the World Steel Association’s Climate Action Programme.
• At least 60% of OneSteel Reinforcing steel is produced using Polymer Injection Technology – an energy reducing process in manufacturing.
• At least 95% of all OneSteel Reinforcing REBAR and REOMESH® meets or exceeds 500 MPa strength grade.
• At least 15% by mass of all OneSteel Reinforcing REBAR and REOMESH® is produced using off site optimal fabrication techniques for agreed projects.
For more information on Green Star® related products visit www.reinforcing.com
OneSteel Reinforcing can meet the new Green Star® steel credit requirements which are outlined below:
REINVENTING
R
EINFORCIN
G
PO
LYM
ER IN
JECT
ION T
ECHNOLOGY
GREEN STAR® CREDIT POINTS
OFF-SITE OPTIMA
L FAB
RIC
AT
ION
Green Building Council documentation requirements
• Documentation to demonstrate compliance with optimal fabrication techniques is required from the steel fabricator/reinforcement processor in the form of a short report on where optimal steel manufacturing techniques are claimed, the optimal off site fabrication techniques used in the building, and the quantities (by mass) of steel used in each optimal off site fabrication technique.
• OneSteel Reinforcing can confi rm pre-project by letter that it can meet the requirements, and will also complete the post-project GBCA Criteria 3 & 4 charts required for the project.
For more information on GBCA documentation visit www.gbca.com.au
• Off site optimal fabrication of reinforcing steel used in the building structure includes any combination of the design-driven fabrication techniques in the table (right) which optimise laps in mesh and spacing between bars, thereby reducing material and waste associated with reinforcing steel fabrication and use.
Off site optimal fabrication techniques*Optimisation Technique
Description
Engineered ReinforcingBar Carpet
Reinforcing bars fabricated off site for rolling out on site
Engineered/Customised Mesh
Run-to-length meshes, tailored meshes, high ductility meshes, special size meshes, engineered meshes, variable wire diameters and spacing
Prefabricated Reinforcing Cages
Prefabricated reinforcing cages for concrete elements such as slabs, walls, cores, columns, piles and beams
GBCA Table 2 – Off Site Optimal Fabrication Techniques for Reinforcing Steels
• Off site cutting and bending of bars to be hand-laid on site is not considered an optimal fabrication technique for the purpose of this credit
• Post-tensioning tendons are not counted in the reinforcing steel quantities.
*Source: GBCA Revised Green Star® Credit 24.08.10
National Product & Services Catalogue 2011/2012
5Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Re
info
rcing
Mesh
ONEMESH® Square & Rectangular Mesh – Cross-sectional Areas
* SL53 and SL63 are 6 x 2.3 m
Note: Cross-sectional areas (mm2/m) shown in bold are average rather than minimum values that apply to meshes lap-spliced in accordance with AS 3600 : 2001 or AS 3600 : 2009. See Technical Note 6 Design to AS 3600 : 2001 of Suspended Concrete Floors Reinforced with Class L Mesh* at SRIA’s website www.sria.com.au for more design information.
Square Mesh* (SL) with edge lap wires Rectangular Mesh* (RL)
ONEMESH® Properties Slab Mesh (6 x 2.4 m)
SL53*
(WA Only)
SL63*
(WA Only)
SL52 SL62 SL72 SL82 SL92 SL102 SL81 RL718 RL818 RL918 RL1018 RL1118 RL1218
Cross-sectional
Area (mm2/m)
Longitudinal Wires
60 94 89141157
179190
227247
290303
354495
454495
358390
454495
581634
709774
899982
11121215
Cross Wires 60 94 89141152
179192
227243
290311
354380
454470
227243
227243
227243
227243
227243
227243
Sheet Mass (kg) 15 21 20 33 41 52 66 80 105 67 79 93 109 130 157
Lapped Splices for ONEMESH® Mesh in Tension or Compression
In AS 3600 : 2001, Clause 13.2.3 states that "the two outermost transverse wires of one sheet of mesh must overlap the two outermost transverse wires of the sheet being lapped," as shown below.
Overlap of ends of sheets (with overhang)
Overlap of sides of sheets
Overlap of side and end of sheets
The same requirements for full-strength tensile laps apply in Clause 13.2.3 of AS 3600 : 2009, but with additional criteria about the minimum spacing of transverse wires, which are all satisfi ed by using ONEMESH®.
ONEMESH® Trench Mesh – Cross-sectional Areas
Product CodeWidth(mm)
Mass(kg)
Longitudinal Wires*
No.Cross-sectional Area
(mm2)
L8TM200 200 7.0 3 136
L8TM300 300 9.1 4 181
L8TM400 400 11.2 5 227
L11TM200 200 13.5 5 227
L11TM300 300 17.8 4 360
L11TM400 400 22.0 5 450
L12TM200 200 15.8 3 334
L12TM300 300 21.2 4 445
L12TM400 400 26.5 5 556
* Standard length = 6 m
REINFORCING MESHReinforcing mesh is used in a variety of applications such as concrete pavements, fl ooring and precast concrete sections. The most suitable reinforcing mesh for these applications should be specifi ed by an engineer.
National Product & Services Catalogue 2011/2012
6Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Re
info
rcing
Mesh
ONEMESH® Ribbed Rectangular Mesh AS/NZS 4671 – Class L
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (kg)
Dimensions(m)
RL718 Sheet 25 x 6.75 @ 100 30 x 7.6 @ 200 67 6 x 2.4
RL818 Sheet 25 x 7.6 @ 100 30 x 7.6 @ 200 79 6 x 2.4
RL918 Sheet 25 x 8.6 @ 100 30 x 7.6 @ 200 93 6 x 2.4
RL1018 Sheet 25 x 9.5 @ 100 30 x 7.6 @ 200 109 6 x 2.4
RL1118 Sheet 25 x 10.7 @ 100 30 x 7.6 @ 200 130 6 x 2.4
RL1218 Sheet 25 x 11.9 @ 100 30 x 7.6 @ 200 157 6 x 2.4
ONEMESH® Ribbed Square Mesh AS/NZS 4671 – Class L
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (kg)
Dimensions(m)
SL52 Sheet 10 x 4.77 @ 200+4 x 4 @ 100
30 x 4.77 @ 200 21 6 x 2.4
SL62 Sheet 10 x 6 @ 200+4 x 4.24 @ 100
30 x 6 @ 200 33 6 x 2.4
SL72 Sheet 10 x 6.75 @ 200+4 x 4.77 @ 100
30 x 6.75 @200 41 6 x 2.4
SL81 Sheet 25 x 7.6 @ 100 60 x 7.6 @ 100 105 6 x 2.4SL82 Sheet 10 x 7.6 @ 200
+4 x 5.37 @ 10030 x 7.6 @ 200 52 6 x 2.4
SL92 Sheet 10 x 8.6 @ 200+4 x 6 @ 100
30 x 8.6 @ 200 66 6 x 2.4
SL102 Sheet 10 x 9.5 @ 200+4 x 6.75 @ 100
30 x 9.5 @ 200 80 6 x 2.4
ONEMESH® Ribbed UTEMESH® AS/NZS 4671 – Class L
UTEMESH® has been specifi cally designed to conform to road traffi c authorities regulations in terms of transportation of oversize products. UTEMESH® can also be easily handled by one person using the appropriate lifting techniques. Now safer to handle with reduced fl ying ends (reduced to 20 mm). Up to 8% improved mesh cover through lap effi ciency across and along the sheet.
x Diameter (mm) x Spacing (mm) BSS
BRS
BUS
Visit your nearest branch or www.reinforcing.com
Ask us about larger size mesh to suit your project
Talk to OneSteel Reinforcing early in your project for producing larger size and customised mesh sheets
• Reduces lapping, cutting and waste• Suited to residential and commercial projects• Cut & Bent service and delivery to site available
made to size
Product Code
Std Unit Longitudinal Wires Cross Wires Mass (kg)
Dimensions (m)
SL62UTE Sheet 8 x 6 @ 200 20 x 6 @ 200 18 4 x 2
SL72UTE Sheet 8 x 6.75 @ 200 20 x 6.75 @ 200 23 4 x 2
SL82UTE Sheet 8 x 7.6 @ 200 20 x 7.6 @ 200 30 4 x 2
National Product & Services Catalogue 2011/2012
7Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
ONEMESH® Square Mesh 300 x 300 Spacing – Class L
Note: Only available in WA
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (kg)
Dimensions(m)
SL53 Sheet 6 x 5 @ 300 20 x 5 @ 300 14 6 x 2.3
SL63 Sheet 6 x 6 @ 300 20 x 6 @ 300 21 6 x 2.3
BSS1
Plain Square Mesh – Sheet
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (kg)
Dimensions(m)
F41 Sheet 25 x 4 @ 100 61 x 4 @ 100 29 6 x 2.4
F51 Sheet 25 x 5 @ 100 61 x 5 @ 100 45 6 x 2.4
BSSS
Plain Square Mesh – Roll
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (kg)
Dimensions(m)
F411 Roll 25 x 4 @ 100 601 x 4 @ 100 286 60 x 2.4
F41ST Roll 23 x 4 @ 100 601 x 4 @ 100 274.5 60 x 2.4
BSSR
Concrete Tank Mesh
Product Code
Std Unit
Mass (kg)
Dimensions (m)
F414 Sheet 13 4.5 x 1.4
F415 Sheet 15 5.4 x 1.4
These mesh sheets have been designed to suit various concrete tank manufacturers’ tank designs.
BST
Masonry Mesh
BPS
Product Code
Std Unit
Longitudinal Wires
Cross Wires
Mass (Kg)
Dimensions (mm)
MM50 Sheet 2 x 3.15 @ 50 10 x 3.15 @ 300 0.877 3000 x 50
BR100 Sheet 2 x 3.15 @ 100 10 x 3.15 @ 300 0.945 3000 x 100
BR150 Sheet 2 x 3.15 @ 150 10 x 3.15 @ 300 1.012 3000 x 150
Note: Only available in Darwin
Re
info
rcing
Mesh
National Product & Services Catalogue 2011/2012
8Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Tren
ch M
esh
Trench Mesh AS/NZS 4671 – Class L Size 8
ProductCode
Std Unit
Longitudinal Wires
Mass (kg)
Dimensions (m)
L8TM200 Sheet 3 x 7.6 @ 100 6.8 6 x 0.2
L8TM300 Sheet 4 x 7.6 @ 100 9.2 6 x 0.3
L8TM400 Sheet 5 x 7.6 @ 100 11.6 6 x 0.4
L8TM500 Sheet 6 x 7.6 @ 100 13.9 6 x 0.5
Trench Mesh AS/NZS 4671 – Class L Size 11
ProductCode
Std Unit
Longitudinal Wires
Mass (kg)
Dimensions (m)
L11TM200 Sheet 3 x 10.7 @ 100 13.3 6 x 0.2
L11TM300 Sheet 4 x 10.7 @ 100 17.7 6 x 0.3
L11TM400 Sheet 5 x 10.7 @ 100 22.3 6 x 0.4
L11TM500 Sheet 6 x 10.7 @ 100 26.8 6 x 0.5
Trench Mesh AS/NZS 4671 – Class L Size 12
Trench Mesh AS/NZS 4671 – Class L Size 16
Product Code
Std Unit
LongitudinalWires
Mass (kg)
Dimensions (m)
L12TM200 Sheet 3 x 11.9 @ 100 15.8 6 x 0.2
L12TM300 Sheet 4 x 11.9 @ 100 21.2 6 x 0.3
L12TM400 Sheet 5 x 11.9 @ 100 26.5 6 x 0.4
L12TM500 Sheet 6 x 11.9 @ 100 31.9 6 x 0.5
Product Code
Std Unit
LongitudinalWires
Mass (kg)
Dimensions (m)
FTM16200 SHEET 3 X 15.9 @ 100 30.6 6 X 0.2
FTM16300 SHEET 4 X 15.9 @ 100 41.1 6 X 0.3
TRENCH MESHTrench Mesh is used to reinforce concrete beams constructed in ground for housing, industrial and commercial buildings for example. The most appropriate Trench Mesh for these applications should be specifi ed by an engineer.
BTS
BTS2
BTS3
IBNE
National Product & Services Catalogue 2011/2012
9Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
HA
ND
IME
SH
®
HANDIMESH® Sheet – Galvanized
HANDIMESH®
HANDIMESH® Sheet – Black
Product Code
Length(m)
Width(m)
Line Wire(mm)
Cross Wires(mm)
Mass(kg)
B224 3 2.4 4 @ 50 4 @ 50 29
B234 3 2.4 4 @ 50 4 @ 75 24
B225 3 2.4 5 @ 50 5 @ 50 44
B235 3 2.4 5 @ 50 5 @ 75 38
B445A 3 2.4 5.6 @ 100 5.6 @ 100 29
HANDIMESH® Sheet – Handi Size Galvanized
ProductCode
Length(m)
Width(m)
Line Wire(mm)
Cross Wires(mm)
Mass(kg)
G112AHS 2 1.2 2.5 @ 25 2.5 @ 25 8
G122AHS 2 1.2 2.5 @ 25 2.5 @ 50 6
G234HS 2 1.2 4 @ 50 4 @ 75 8
G224HS 2 1.2 4 @ 50 4 @ 50 10
G444HS 2 1.2 4 @ 100 4 @ 100 5
HANDIMESH® is a range of general purpose welded mesh products. Its uses range from simple domestic applications to commercial and industrial projects.
Our Handi Size sheets are made for people who are doing smaller jobs and don’t need our full size sheets. Less waste = Less cost.
Ideal for:
• Pet enclosures• Garden arches• Security screens• Wine racks• Storage bins
• Fishpond covers• Shelving• Guarding equipment• Fencing• Trailer enclosures
PGG
PG
PGHG
Product Code
Length(m)
Width(m)
Line Wire(mm)
Cross Wires(mm)
Mass(kg)
G112A 3 2.4 2.5 @ 25 2.5 @ 25 23
G122A 3 2.4 2.5 @ 25 2.5 @ 50 17
G113 3 2.4 3.15 @ 25 3.15 @ 25 36
G123 3 2.4 3.15 @ 25 3.15 @ 50 27
G234 3 2.4 4 @ 50 4 @ 75 24
G235 3 2.4 5 @ 50 5 @ 75 38
G224 3 2.4 4 @ 50 4 @ 50 29
G225 3 2.4 5 @ 50 5 @ 50 44
G445 3 2.4 5 @ 100 5 @ 100 23
G445A 3 2.4 5.6 @ 100 5.6 @ 100 29
G465A 3 2.4 5.6 @ 100 5.6 @ 150 24.3
National Product & Services Catalogue 2011/2012
10Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Sto
ckyard M
esh
rural mesh
IRONBARK® Stockyard Mesh Sheet – Galvanized
HANDIMESH® Sheet - Handi Size Galvanized
IRONBARK® Stockyard Mesh Sheet – Black
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STG5109 6 0.9 100 250 5 13
STG51011 6 1.1 100 250 5 15
STG569 6 0.9 100 150 5 15
STG5611 6 1.1 100 150 5 18
Product Code
Length (m)
Width (m)
Line Wire (mm)
Cross Wires (mm)
Mass(kg)
G112AHS24 2.4 1.2 2.5 @ 25 2.3 @ 25 9
G122AHS24 2.4 1.2 2.5 @ 25 2.3 @ 25 7
G224HS24 2.4 1.2 4 @ 50 4 @ 50 12
G234HS24 2.4 1.2 4 @ 50 4 @ 75 10
G444HS24 2.4 1.2 4 @ 100 4 @ 100 6
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STB8812 6 1.2 100 150 8 46
STB8814 6 1.4 100 200 8 51
OSG
PGHGE
OSL
OS
IRONBARK® Stockyard Mesh – Large Galvanized
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STHG8812 6 1.2 100 200 8 45
STG5615 6 1.5 150 150 5 24
OSGL
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STB569 6 0.9 100 150 5 15
STB5611 6 1.1 100 150 5 18
National Product & Services Catalogue 2011/2012
11Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Sto
ckyard M
esh
IRONBARK® Stockyard Mesh Roll – Black
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STB569R 30 0.9 100 150 5 73
STB5611R 30 1.1 100 150 5 88
OSR
IRONBARK® Stockyard Mesh Roll – Galvanized
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Wire Dia (mm)
Mass(kg)
STG5109R 30 0.9 100 250 5 63
STG51011R 30 1.1 100 250 5 76
STG569R 30 0.9 100 150 5 75
STG5611R 30 1.1 100 150 5 90
STG5615R 60 1.5 150 150 5 194.5
OSGR
rural mesh
IRONBARK® Farm Gate Infi ll – Galvanized
Product Code
Length(m)
Height(m)
Horizontal Spacing
(mm)
VerticalSpacing
(mm)
Mass(kg)
FGI8 2.35 1.1 100 195.5 7
FGI10 2.95 1.1 100 196.4 8
FGI12 3.55 1.1 100 197 10
FGI14 4.15 1.1 100 197.4 11
FGI16 4.65 1.1 100 197.7 13
OGG
Mesh for small projectseshh fffor smalll projjjeMMeNEW and improved
Easy to handle & legal to transport 4 m x 2 m mesh sheets.
• New design with reduced fl ying ends (from 100 to 20 mm)
• Up to 8% improved mesh cover through lap effi ciency across and along the sheet
• Ideal for driveways, paths and smaller concreting jobs
Call into your nearest branch or visit www.reinforcing.com
™eco mesh
National Product & Services Catalogue 2011/2012
12Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Re
info
rcing
Wire
Straightened Wire – Black
ProductCode
Length(m)
Mass (kg/m)
Length*(m/t)
W4C 6 0.1 10140
W5C 6 0.15 6490
W6C 6 0.25 4500
W7C 6 0.31 3310
W8C 6 0.40 2530
W10C 6 0.62 1580
LCD
Straightened Wire AS/NZS 4671 – Class L Black Ribbed
ProductCode
Mass (kg/m)
Length*(m/t)
RW6.00C 0.22 4500
RW6.75C 0.28 3560
RW7.60C 0.37 2810
RW8.60C 0.45 2190
RW9.50C 0.56 1800
LCR
Straightened Wire – Galvanized
LCG
ProductCode
Mass (kg/m)
Length*(m/t)
GW4C 0.1 10410
GW5C 0.15 6490
GW5.6C 0.19 5170
GW6C 0.22 4500
GW8C 0.4 2530
Need more technical data? NEW REODATA 4.0
Available Now!
To receive your FREE copy, call into your nearest branch or visit www.reinforcing.com
3
www.reinforcing.com | www.reinforcing.tv 3
Along with REODATA, we also have a range of reinforcing essentials, guides and resources that will benefit your next project including:
REOWORKS – comprehensive CD and DVD combination for everything on REO including case studies, videos and technical data.
REO CALCULATOR – for steel reinforcement area calculations.
REO WIRE GAUGE – for measuring REOMESH® wire diameters.
REO BAR GAUGE – for measuring REBAR diameters.
NATIONAL PRODUCT & SERVICES CATALOGUE – the most comprehensive guide to reinforcing available anywhere today.
REINFORCING.COM – the online resource for products, technical data, case studies and testimonials that’s right at your fingertips.
REINFORCING.TV – our YouTube™ channel where you can see our products and services in action and listen to our customers talking about the benefits they get from using our reinforcing solutions.
To keep you up to date on all our reinforcing products, visit the ‘Register for Updates’ page at www.reinforcing.com
b h i it i f i
ooorrrcccciinnngg..tv
Along with REODATA, we also have a range of reinforcing essentials, uides and resources that will benefit your next project including:
DVD combination for
www.reinforwww reinforww reiww reinforww.reinforww reinfoww reinww i fww.reinfw reinforww reinforww reinforeinforeinforreinforwww.reinforwww.reeinforinfowww reinforfnforrwwwww.reinfowwwwww.reinforww reww.reinfow.reinforw.reinforw reinforeinww.reinforeeiwww.reinnforwww.reinfoowww.reinforrwwwwwwwwwwwww.reinforww.reinforw.reinforreeinforeiww.reinforoowww.reinforwwwww reinfowwww.rwww.reinforwwwwwwww.reinfww.rein.reinrrreinforreinfowwwwwww.reinfowwwww.reinfowwwww.reinfww.reinfw.reinforww.reinforeeinforeeiinnnwwwwwwwwwwwwww.reinwwww.w.w.rrrreeeinfeii ffoooowwwwww.w.reinforrrreeeeeiinnnforreinfororrcing.comcing.com cing.comiing coi ggcing.comcing.comcomcing.comcing.coming.com cing.comccing.comcing.comcing.coming coinnng.comng.comng.cing.conggcing.ccccccing.ccing.coomoomommmmmmming.com cccing.com ng.comng.comng cog.comgg.c.com cing.comcco.com ommmmmmmmcincing.com nng.comgggg.cccoommmmmcing.com mccincing.comcing.cing.cogggg.com.comcomcing.com cing.comcing.coming.coinng.comnng.comngg.com comccccciing.cn .com cocomcomm g | www.rei| www.r www.rei| www.reiwww.reiwww| wwww www.| www.reiw.reiiiwww www.reiwww.re| www.reiwww.wwww.ww.rewww rei www.rw reiww.reiw.reiww.reiww| wwww| wwwwwwww reiww.reie.rewww.rewww.reiw.reii| ww| www.rewwww rwww reiwwww.reieiiwww.wwwwwwwwww.rew.reiirei| ww|| wwwwwwww.reiwww.rw.| www| www| ww www wwwwwwwwwwwwwww.rwww.rree| www|| www wwwwwwwwww| wwwwwwwww.rw.reeeeii|||| nfonnfnfonfonffonfnnffnfnfnnfffonnfofffnfoonnnnnfnnnnnf
guides and resources tha
REOWORKS – comprehensive CD and DVD combination foeverythingeverytheveveryverything oerything oything oeverythieverythveryveerytheerything oeverytheverythveerythinereveryeverytryythinytheverythytthinthing eve t g n REO including case studies, videosideos and technicand technicand techniccal dataal datataaal data.al datatdataal dataatadataaata.atdattaatadataal data.ata.dataal ddd a.
REO CALCCALCLCCACCCCALCALCAAAALLCCCUUUUUUUUULATOLATAAATATTTOTOOOLATOATTTTOTOOOLATOOOLLATOLL RRRRRRRRRRRRR for steelt lfor steelfo– for steelfor steel– fo– for st– ffor steel– for – for stefor for stfor steor steelor stesteelrr stesteeeeeeeel reinforcemereinforcemeforcemereinforcemereinforcereinforeiin orcemerr inff emmeeeeentnt ant arnt areaarea ct area calclcrea calcarea calca calcarea calclccaaa caarea callcea calcccea calcarea ca ccacaaalcccalcrrent arearea cccaannttt areaaa cccaannntt ccc ulaulations.latullluu
REERRRRRREERREEEEEOOOOO WWWWWWWWIIIRE GRRRE GRERREREEEEEE GGGREEEEE E AAAAAAUGEUUUUUGGGG – for measusuuuuo easuo easuoooooo eo easuring REOMMg REOMESring REOMEEMEring REOMESSring REOMESHREOMMMring REOMng REOMEg REOMEEOMEng REOring REOring REOg REOMng REOMMring RRRring REREOng REOnnringringg Rg ® wire diameters.
REREREOOO BBAAAARRRR GGGRRRRR GRRRRRRRR GRRRRR GAUGE – for measuring REBAR diameters.
NNNNNATIONALAATIONAATIOATIONAATIOTIONTIIONAONALONALONAOONANNAATIONALAANAALATIONALLLNALNATINATIONNATIONNATIONALAAAATIONAATTIIONALOO ALAAAALLLLNNNNATIONALNATIONALAATIOATIONALTIOTIONONANAAAAALLNATNATIONNATAAAAAATATT NNAAALLIIOOOONAAAALLNNAALL PRPPPPRRRRPPPPPRRRRRPRPRPPRPPRPPPPRRRRPPPPRRRRPPRRRROOOOOOOOOOOOOOOOOOOOOOOODDDDDDDDDDDDDDDDDDDD RVICES CATALOGUE – the mosststtttttttttttt comprehensivehhhhhheeeeenncomprehensiomprehensivm hompreheeeeenncomprehensivcomprehensccoomprehoomprehensomm hhompreheeemprehensivmprehensivprehensivprehenpprrehensr hhehensiennhhheeeennco ennsivs e gue gu einforcing a where today.ere todayere todayo y.dtt dwwwwhhhhere today.he y.hewhere todtwherewhere twherwhhhhwheere todeeerrrreee todayeehwhere todwhere todwhere hhere todeerre todarehere todaywhere today.ee ttooooddd ywwwhhere errrree tere toodayoooddaaayy
REREINFOINFOOORRRRCINCINCINC NGGG.G.GGGGGGGGG COCOCOCOO oducts,oducts,oodddd technical d technical dchnical dhhhhnical dhnical diiccaal dnical dal dcal dddddhnicannnniiccal dlhnnnnicaaaall ddnniiccaal dnniiciccccaanniiccanniiccca ataatatttataataataaaatattaataatttaata, ataaaaatttaaataa, case studiescase studiesase studiesse stuse studiesssesssase stuuudddddiieuuudddddiieseseseudiessssuudddddiieeees annnd tnd td tnd tanannaanaaaaan nials that’s right at yo fififingertipsfingertipsfingertipsfingfifi ertfififingertipsfifi .
RERER INFOINFOOFOINNN RRCINCIIINNNNNNCININNNNNNNNNGGGGGGGGG.GGGTTTTTTTTTTTTT. rre you care you carrrre yorerr n see our n see our ee ouee ourourrur uuue our products andproducts andproducts at dddtts dproductd ttss dtts dp sucts andproducts a dd servservsersee action and listen to ou customerscustomers customercustomt eerrrrst ersererssssc ersc eerrrc rrsss c e sss talking alkingklkinalkinkktttattataattataaalkabout thabout the bout tabout th btthhhhe behee bbebbbbeabout ttthhheee bee be bebebetthe thhheeaba tthhheeut ttthhhettthhe nefitfiefifitnefinefinenefifififitfififififififififi et from usin oooooorcing solutrcing sorcing sorcing sorcing so tiircing so tiircing so ircing soinn o in io iioons. ns.ooooonooonononon .
TTTTTTTTo keep you uo keep you uuuo keep yo keep you uuuuukeep you uuukeep uo p tpp p p proroppppp ducts, visitducts, visit, vii, vis, vis, visvisiiitcts visitvii, visits, visitvvisis, visisitvvvisissiisits, vv ss, vissssd s viiis,, the the the ththet etht eTTTTTT‘Register foRegister fo‘Register foter foer foe‘‘RRRegistReR gistereRRRRRReReeeeggggister fgii rRegiRegister eRegisegggReggiissssstttteeeeRRegRegister feeggg sstttteeeeRegisterr forr fffoggg rrr Upr Ur UpUprr UUprr Uprr Ur UUUpppr UUUUUr Uppppp nnggggnngnngnngng.com.como
ESSENTIAL TECHNICAL DATA ON STEEL REINFORCEMENT
DUDUUDDDUUUUUDUUUUUDUUUDUUUUCTCCCCCCCCCCC & SERVERVVICICICEES CATALOALOGdeuide to rid to rto ro ro ro reeinforcing aeinforcing aeinforcing aeinforcing availablvailable anyailable ae anyvaila eee anyevaila eee anyaanye an anynnnnnyyyvail ee aanyaaanane ananyyyanye anya yyee anyaaannnyee aaannyyyywwwwwwwwwwwwwww
OOOOMOMOMMMMOOOM – tt th the thethethethe the the othe ohe ohe onlinhe onlin– e resoure resource fsource fource fource fource furce furce furce frce foooororr prooooo otesttesstitimtimtimmmomomoteestimmmestimmimmte immmmm nials that’snials that’sls that’s right atright atat at atat t yt yt yyoyoyoat yyrig ur fififififi
TTTTTVVVVVVVVVVVV ––––– our– our Yr YouTu––– ooo o be™ chanannel nnel wwwhwhwhwhhererww rwwwhw rw rrvrvvvviviciciccecesss is ininicicc sviicesv esssv ss action and listen tto oto oououuuuouuurr cr ccrttts ttthhhhetheyy gfittttssss theththhhefittssss ttssfitts th et from using ourr reir reininnnnnffffonffooon
ttototooo o dddadadaateatee ondda e ono o ddaaatetee oneaatattteeeee onnnondaatteeee onooonnonatte oonnaatttteeeee ooo all our reiall our reiall our reiallaaall our all ourlll ooouall our reiaaallll our l ou oooouu r inforrcingrcinggg g ppppgg pppggpdapdaaatttttees’s’’’pdaaattteeeesses’ttteeeeessaaaatttteeeeessss’es’pdddddapdaatttteeppppdddddaaaaatttteeeeppdaatttteeeespp page at wwwpage at wwwage at wwwe at wwwpage at wage at wwwpage at wwwage at wwpage at wwwttpage at wwwwwwage at wwpappage at wwwage at wwwage at wwwge at wge at wwwgeee atat wt wwwwwge at wwge at wwwwage at wwwge at wwwe at wwwpppage at wwwge at wwge at wwwgege at wwe atee at wwwat wwat wat t wwwat wwage at wwwpage at wwwwage at wwwppppage at wwgege at wwatt wwwt wwwwppp gege wwwwwat wwwpppagee aaat wwwp g wpppp g .reinforei ffffoinfor.reinforeinforcrcciciiinin.reinforre nneinfnfffonfoeinfofoorrrcccrcciiinnnn.reinforrereinfor.rereeeeeiinfornnforreinfoorrrrccccciiinnnnreieinfoinnnnfffnfooorrccciinnnn. nfoorrccccciciinnnn..rrrereeeeiin rrrccccciiinnnn. inn ooorrrcc nnn
REINVENTING
REINFORCIN
G
www.reinforcing.com
www.reinforcing. tv
4.0
Build with OneSteel Reinforcing
* Approximate
* Approximate
* Approximate
National Product & Services Catalogue 2011/2012
13Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Re
info
rcing
Bar
Standard Ligature
Product Code
No. Per Bundle
Dimensions(mm)
R6F2015 10 200 x 150
R6F3015 10 300 x 150
R6F4015 10 400 x 150
R6F2020 10 200 x 200
R6F2520 10 250 x 200
R6F3020 10 300 x 200
R6F3520 10 350 x 200
R6F4520 10 450 x 200
R6F3025 10 300 x 250
R6F4025 10 400 x 250
R6F3030 10 300 x 300
R6F3530 10 350 x 300
R6F4030 10 400 x 300
R6F4530 10 450 x 300
R6F4020 10 400 x 200
R6F4035 10 400 x 350
R6F4540 10 450 x 400
Used to form footing cages and provide shear reinforcement in concrete beams. Available to suit a wide range of footing beam sizes.
ARFE
accessoriesconcrete&building
Standard Ligature
Product Code
No. Per Bundle
Dimensions(mm)
R10F2020 10 200 x 200
R10F3020 10 200 x 300
R10F3030 10 300 x 300
R10F3520 10 200 x 350
R10F4020 10 200 x 400
ARFE5
Non-standard Ligatures
Product Code Length Mass (kg/m)
Length (m/t)
W6F Various 0.25 4090
W8F Various 0.4 2530
W10F Various 0.02 1620
Z-Bar provide a positive connection between the slab and the footing beam reinforcing.
LPF
National Product & Services Catalogue 2011/2012
14Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Fabricate
d Z
Cag
es
Fabricated Z Cage – Class N Bar
Fabricated Z Cage – Class L Wire
ProductCode
No. of Bars
Height(mm)
Width(mm)
ZC4Y 4 x N12 200 200
ZC12435 4 x N12 350 150
ZC9Y 6 x N12 300 200
ZC10Y 6 x N12 400 200
ZC12635 6 x N12 350 150
ZC11Y 6 x N12 500 200
ZC16Y 6 x N16 500 200
Product Code
No. of Wires
Height(mm)
Width(mm)
ZC111 6 x RW10.70 200 200
ZC711 6 x RW10.70 300 200
ZC811 6 x RW10.70 400 200
ZC11 8 x RW10.70 200 300
ZC18 8 x RW10.70 300 300
IBZC
ILCZ
• Z Cages provide reinforcing for various concrete strip footing applications.
accessoriesconcrete&building
Footing Bars — Z Bar
ProductCode
No. Per Bundle
Dimensions(mm)
R10Z203030 25 200 x 300 x 300
R10Z203530 25 200 x 350 x 300
R10Z204030 25 200 x 400 x 300
R10Z204530 25 200 x 450 x 300
R10Z2032 25 200 x 320 x 200
Z-Bar provide a positive connection between the slab and the footing beam reinforcing.ARFE3
Reduce Your Slab Costs• Fixed square metre price
• Reduces on-site labour requirements
• The Waffl e Slab package includes: Plastic sheeting, Polystyrene waffl e pods, Spacers, Reinforcing bars, ONEMESH®, Tie wires, Bar chairs and Tape
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
15Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
PO
OL
ST
EE
L®
FREE REO Bar Gauge• Confi rm key REBAR sizes for N10, N12, N16, N20,
N24, N28 and N32.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
POOLSTEEL® (S12) 250N Grade
Product Code
Mass(kg/m)
Stock Lengths(m)
Length(m/t)
S12S 0.91 6 183
S12S 0.91 9 122
POOLSTEEL® is specifi cally designed for use in pools and complies with AS 2783 : 1992. Use of reinforced concrete for small swimming pools and AS/NZS 4671 : 2001. Steel reinforcing materials.
Benefi ts• 250N Grade 12 mm diameter steel• Made in Australia by OneSteel• Flexibility in pool designs• Independently certifi ed by ACRS• Gives concrete strength and crack control• Proven in 1000’s of pools
APS
Footing Cages
L8TM Top & Bottom L11TM Top & Bottom L12TM Top & Bottom
8TM200 Top &
11TM200 Bottom
Cage Width (mm)
Depth (mm) Product Code 200 300 200 300 200 300 200
200SE QLD ZC18A ZC12 ZC111 ZC11 - - -
NSW 8ZC2020 8TC3020 11ZC2020 11TC3020 12ZC020 - -
300SE QLD ZC210 ZC17 ZC711 ZC18 ZC9Y - ZC7A
NSW 8ZC2028 8TC3030 11ZC2028 11TC3030 12ZC2028 12TC3028 -
400SE QLD ZC310 - ZC811 ZC20 ZC10Y - -
NSW 8ZC2040 - 11ZC2040 - 12ZC2040 - -
Note: Standard length = 6 m
National Product & Services Catalogue 2011/2012
16Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
AC
RS
OneSteel Reinforcing REOMESH® & REBAR are ACRS accredited
Relevant Concrete Construction Standards
ACRS – The Australian Certifi cation Authority forReinforcing Steels • ACRS is an independent third party assessment body which
checks Reinforcement for compliance to AS/NZS 4671, Steel reinforcing materials
• It tests both the steel supplied by the steel mills in Australia & overseas to Australian reinforcing mesh manufacturers, and the fi nished REBAR and REOMESH® products delivered to builders and concreters
• ACRS certifi cation independently confi rms the Standards compliance of the materials you buy
• Ask for proof that the reinforcing mesh you are supplied complies with AS/NZS4671, Steel reinforcing materials
• The easiest way to check this is ask to see your supplier’s ACRS certifi cate.
Full details of ACRS can be found at acrs.net.au
Does reinforcing bar and mesh comply with Australian Standards?• Commercial buildings, bridges, civil structures, house slabs,
patios, extensions, driveways, footpaths, etc. must be built with steel reinforcement with the correct chemical and mechanical properties.
• Not all REBAR and REOMESH® meets Australian Standards. Materials are sourced widely in Australia and from overseas, and manufactured to varying standards, so you need to check and be sure of what you are getting or specifying.
• There are potentially serious consequences of using non-compliant materials. For example: serviceability (excessive cracking or defl ections due to poor bond); ultimate (reduced strength and safety due to low yield stress or inadequate ductility).
• Australian Standards require steel reinforcement to have the necessary chemical and mechanical properties, strength and level of ductility appropriate to the engineering design assumptions on which they are based.
• The Building Code of Australia (BCA) references Australian Standards. ACRS certifi ed steel reinforcing materials comply with the relevant Australian Standards and therefore the BCA.
Relevant Concrete Construction Standards:Commercial, Civil, IndustrialAS/NZS 4671 : 2001 Steel reinforcing materials• Specifi cation of Steel bars, wire and mesh for use in reinforced
concrete structures that have been designed in accordance withAS 3600 : 2001 or AS 3600 : 2009.
• Amendment 1: 2003 refers to latest ISO Standards, etc.• 250 & 500 MPa, Class N & L reinforcing bar and mesh.AS 3600 : 2009 Concrete structures• Design and detailing of concrete structures and elements, with
or without steel reinforcement or prestressing tendons, based on the principles of structural engineering mechanics.
• Previous version referenced in BCA published in 2001,i.e. AS 3600 : 2001 not expected to be withdrawn until July 2012.
• References AS/NZS 4671.• Amendment 2, 2004 provided modifi ed rules for the design of
Class L steel in fl oors.• AS 3600 : 2009 published December 2009: Amendment 1, 2010
contains mainly typographical corrections.AS 5100.5 : 2004 Bridge design: Concrete• Minimum requirements for the design and construction of
concrete bridges and associated structures including members that contain reinforcing steel and tendons, or both.
• Although AS 5100.5 closely follows the design rules of AS 3600. There are some differences in regard to the detailing of reinforcing steel in concrete elements. Recent developments in AS 3600 : 2009 have yet to be considered.
AS/NZS 1170 : 2002 Structural design actionsPart 1: Permanent, imposed and other actions (Loading code)• Specifi es permanent, imposed, static liquid pressure, ground
water, rainwater ponding and earth pressure actions to be used in the limit state design of structures and parts of structures.
• Ref AS/NZS 1170 - Loading Standards.• Amendments 1 & 4 - April 2005.AS 2327.1 : 2003 - Composite structuresPart 1: Simply supported beams• Sets out minimum requirements for the design, detailing and
construction of simply supported composite beams composed of a steel beam and a concrete slab interconnected with shear connectors, including applications where the slab incorporates profi led steel sheeting.
• The main changes are related to the design of shear connectors, stud location, distinction between open and closed rib profi les, 500 MPa longitudinal shear reinforcement and some new reference material.
AS 1554.3 : 2008 Part 3: Welding of reinforcing steels• The welding of reinforcing steel used in concrete structures that
are designed and constructed in accordance with AS 3600.• Reference: AS/NZS 4671.AS 110O-Part 501 : 2002 - Technical drawing - Structural engineering drawing• This Standard references AS/NZS 4671 : 2001 and thus covers
the use of 500 MPa reinforcing bar and mesh.
Relevant Concrete Construction Standards: Residential Housing Slabs, Concrete Pavements, Pools, Driveways, Patios, House Extensions, Footpaths, etcAS/NZS 4671 : 2001 Steel reinforcing materials• Specifi cation of steel bars, wire and mesh for use in reinforced
concrete structures that have been designed in accordance with AS 3600 : 2001 or AS 3600 : 2009.
• 250 & 500 MPa. Class N & L reinforcing bar and mesh.• Supersedes AS 1302, 1303 & 1304. Amendment - 1 June 2003.AS 3727 : 1993 Guide to residential pavements• Guidelines for the selection and construction of pavements
associated with residential buildings consisting of single houses or multiple dwellings in medium density housing development.
• Recommends mesh sizes for concrete slabs, depending on the service requirements.
• Loading categories - foot traffi c, light and medium vehicles,as well as joint spacing.
AS 2870 : 2011 Residential slabs and footings – Construction• This standard covers slab on ground for housing.• Classifi cation of a site and the design and construction of a
footing system for a single dwelling house, townhouse or the like which may be detached or separated by a party wall or common wall, but not situated vertically above or below another dwelling.
• Treats Class N and L reinforcing steels as fully equivalent to each other as main or secondary reinforcement.
• Previous version referenced in BCA published in 2001,i.e. AS 2870 : 1996.
AS 2783 : 1992 Use of reinforced concrete for small swimming pools• Structural design and construction of reinforced concrete pools• References AS 3600 & AS 3735 - Concrete structures for
retaining liquids.
National Product & Services Catalogue 2011/2012
17Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
SR
IA
Steel Reinforcement Institute of Australia (SRIA) Technical Notes
OneSteel Reinforcing is proud to be a member of the SRIA. The following Technical Notes are available for download from the SRIA website.
Technical Note 1: Surface Condition of Steel Reinforcement
Technical Note 2: Substitution of N12 Rebar as AS 2870 Residential Slabs & Footings
Technical Note 3: Restrictions on the Use of Wire Bar Chairs
Technical Note 4: Fabrication and Site Handling of Reinforcing Bars
Technical Note 5: Guidelines for Economical Assembly of Reinforcement
Technical Note 6: Design to AS 3600 : 2001 of Suspended Concrete Floors Reinforced with Class L Mesh
REBAR & REO WIRE Product Designations
AS/NZS 4671*
Designation
OneSteel Designation**
Yield Stress (MPa)
Ductility Class***
Product Description
Source Material Type Size Range
D5OON_ N_ 500 NHot rolled
deformed rebar (500PLUS® REBAR)
TEMPCORE® (TC)MICROALLOY (MA)
CONTISTRETCH (CS)
N12 – N40 straight stock lengths
N10, N12, N16 off coil
R250N_ R_ 250 N Hot rolled round rebar Mild SteelR6, R10, R12 off coilR16 – R28 straight
stock lengths
D25ON_**** S_ 250 NHot rolled deformed rebar (POOLSTEEL®)
Mild Steel S12 – straights
D5OOL_ RW_ 500 L Cold rolled ribbed wire Mild Steel RW5 – RW12 off coil
R5OOL_ W_ 500 L Cold drawn round wire Mild Steel W4 – W12 off coil
* AS/NZS 4671 : 2001 Steel reinforcing materials, D = Deformed, R = Round, N = Normal Ductility, L = Low Ductility
** _ indicates bar diameter (mm), N = Normal, R = Round, S = Structural, RW = Ribbed Wire, W = Wire
*** Uniform Strain Limits N : Normal (≥5%) L : Low (≥1.5%)
**** POOLSTEEL®
Reduce your steelfi xingPrefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
www.sria.com.au
National Product & Services Catalogue 2011/2012
18Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
RE
BA
R &
RE
OM
ES
H®
REBAR & REOMESH® – Identifi cation markings
Identifi cation markings are rolled into the different types of REBAR and the wire in REOMESH® so the manufacturing facility of origin and steel type can be identifi ed.
The identifi ers for REBAR have been standardised as a combination of horizontal marks placed between the ribs at intervals as shown on the right:
The identifi ers for REOMESH® have been standardised as a combination of horizontal and diagonal marks placed between the ribs at intervals. Before 2010, OneSteel Reinforcing rolled the word ‘one’ into wire for REOMESH®.
TEMPCORE
REBARMICROALLOY
REBAR
CONTISTRETCH
REBAR
500N TEMPCORE (TC)
500N MICROALLOY (MA) CONTISTRETCH
500N TEMPCORE (TC)
250N S12 POOLSTEEL
500N MICROALLOY (MA)
Reinforcing wire/mesh identifi ers for manufacturing facilitiesAS/NZS 4671 Grade 500L: 5 – 12 mm
Brisbane - Acacia Ridge™ - / -
Sydney – Revesby™ - /
Melbourne – Sunshine™ // -
Perth – Forrestfi eld™ - - /
REBAR
Sydney Bar Mill
Newcastle Rod Mill
Laverton Bar Mill Laverton Rod Mill
made to size
National Product & Services Catalogue 2011/2012
19Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
RE
BA
R &
RE
OM
ES
H®
500PLUS® REBAR Detailing Information
Cross-sectional area (mm2)
Bar diameter (mm)
Number of Bars 10 12 16 20 24 28 32 36 40
1 78 113 201 314 452 616 804 1020 1260
2 156 226 402 628 904 1232 1608 2040 2520
3 234 339 603 942 1356 1848 2412 3060 3780
4 312 452 804 1256 1808 2464 3216 4080 5040
5 390 565 1005 1570 2260 3080 4020 5100 6300
6 468 678 1206 1884 2712 3696 4824 6120 7560
7 546 791 1407 2198 3164 4312 5628 7140 8820
8 624 904 1608 2512 3616 4928 6432 8160 10080
9 702 1017 1809 2826 4068 5544 7236 9180 11340
10 780 1130 2010 3140 4520 6160 8040 10200 12600
Mass (kg/m)* 0.632 0.910 1.619 2.528 3.640 4.955 6.471 8.190 10.112
Min. Hole Dia. (mm)** 12 15 20 25 29 34 39 44 49
* – Invoice weight - includes rolling margin of 2.5%
** – Minimum hole diameter for clearance
* Measure centre-to-centre
Cross-sectional area (mm2)
Bar diameter (mm)
Bar Spacing* (mm) 10 12 16 20 24 28 32 36 40
100 780 1130 2010 3140 4520 6160 8040 10200 12600
125 624 904 1608 2512 3616 4928 6432 8160 10080
150 520 753 1340 2093 3013 4107 5360 6800 8400
175 446 646 1149 1794 2583 3520 4594 5829 7200
200 390 565 1005 1570 2260 3080 4020 5100 6300
225 347 502 893 1396 2009 2738 3573 4533 5600
250 312 452 804 1256 1808 2464 3216 4080 5040
275 284 411 731 1142 1644 2240 2924 3709 4582
300 260 377 670 1047 1507 2053 2680 3400 4200
REBAR
Reduce your steelfi xingPrefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
National Product & Services Catalogue 2011/2012
20Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
RE
BA
R &
RE
OM
ES
H®
Application Allowable Deviation
Position controlled by cover
Beams, slabs, columns and walls -5, +10 mm
Slabs on ground -10, +20 mm
Footings cast in ground -10, +40 mm
Position not controlled by cover
End of reinforcement 50 mm
Spacing of bars or fi tments in walls, slabs, beams or columns
10% of the specifi ed spacing or15 mm whichever is greater
Note: A positive value indicates the amount the cover may increase and a negative value indicates the amount the cover may decrease relative to the specifi ed cover.
Positioning Tolerances for Reinforcement to AS 3600 : 2009
Processing Tolerances for Reinforcement to AS 3600 : 2009
In accordance with Clause 17.5.3:
The nominal internal diameter of a reinforcement bend or hook shall be taken as the diameter of the pin aroundwhich the reinforcement is bent. The diameter of the pin shall be not less than the value determined from the table as appropriate. Note: TEMPCORE®, MICROALLOY and CONTISTRETCH and all galvanized rebar have differing recommended bending pin diameters.
* Must be indicated on drawing that bars are to be straightened or rebent.
• OneSteel Reinforcing recommends that 500PLUS® TEMPCORE® be used in such situations for use as pull-out bars rather than MICROALLOY or CONTISTRETCH rebar.
Standard Processing Tolerances:
Product UseProduct
ToleranceAllowable
On any overall dimension for bars or mesh except where used as a fi tment
≤ 600 mm overall
-25, +0 mm
≥ 600 mm overall
-40, +0 mm
On any overall dimension for bars or
mesh used as a fi tment
Deformed bars and mesh
-15, +0 mm
Plain round bars and wire
-10, +0 mm
For offset dimensionof a cranked bar
-0, +10 mm
REBAR
Calculating Reinforcing & Accessory Quantities
Accessories in REOMESH® Mesh Round Up: Slab Area (m2) ÷ 12.5 = No. of 6 x 2.4 m Sheets Bar Chairs: Slab Area (m2) ÷ 0.56 = No. of bar chairs Polythene Film: Slab Area (m2) ÷ 180 = No. of 200 m2 rolls Duct Tape: 2 rolls per 200 m2 roll polythene fi lm
Accessories in REBAR Bar Chairs: Slab area (m2) ÷ 0.56 = No. of bar chairs Tie Wire: 3 kg per tonne of REBAR (for bar sizes above 20 mm) 1.5 kg per tonne of REBAR (for bar sizes up to 20 mm)
Accessories in Strip Footings Trench Mesh: Footing Length (m) ÷ 5.4 = No. of 6 m lengths Prefab Cages: Footing Length (m) ÷ 5.4 = No. of 6 m cages Support Chairs: 7 chairs per 6 m length
REBAR No. of Bars: Round Up ( Coverage Length (m) ) + 1 Bar Spacing (m) Bar Length: Concrete dimension (mm) – ∑ {cover each end (mm)} Stock Bars: Allow for lapping of bars when calculating No. of Bars
Spirals Diameter: Concrete dimension (mm) – cover each side (mm) Pitch: Specifi ed on drawing. Maximum of half diameter of spiral No. of Turns: Round Up ( Coverage Length (m) ) + 3 ( Pitch (m) )
National Product & Services Catalogue 2011/2012
21Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Standard Hooks & Cogs to Clause 13.1.2.7 of AS 3600 : 2009
Minimum Dimensions:
D500N bar diameter, db (mm)
Pin diameter factor, fp
*
180o hook 135o hook 90o coga
(mm)b
(mm)c
(mm)
104 for fi tments 100 120 140
5 105 130 155
124 for fi tments 110 130 155
5 115 145 170
164 for fi tments 120 150 185
5 130 165 205
204 for fi tments 140 180 220
5 150 200 245
244 for fi tments 170 220 265
5 180 240 295
28 5 210 280 345
32 5 240 320 395
36 5 270 355 440
40 5 300 395 490
500PLUS® REBAR Standard Hooks and Cogs
In accordance with Clause 13.1.2.6 of AS 3600 : 2009, a standard hook or cog provides half of the tensile development length for that end of the bar, measured from the outside of the hook/cog. In accordance with Clause 13.1.2.7, their details are as follows.
Standard Hook
A hook consisting of a 180o bend around the appropriate pin complying with Clause 17.2.3.2 with a straight extension of 4db or 70 mm, whichever is greater, or a hook consisting of a 135o bend with the same internal diameter and length as for a hook with a 180o bend
Standard CogA cog consisting of a 90o bend around the appropriate pin complying with Clause 17.2.3.2 but not greater than 8db and having the same total length as required for a 180o hook of the same diameter bar
REBAR
*(Pin diameter dp=fpdb)
RE
BA
R &
RE
OM
ES
H®
Need more technical data? NEW REODATA 4.0
Available Now!
To receive your FREE copy, call into your nearest branch or visit www.reinforcing.com
3
www.reinforcing.com | www.reinforcing.tv 3
Along with REODATA, we also have a range of reinforcing essentials, guides and resources that will benefit your next project including:
REOWORKS – comprehensive CD and DVD combination for everything on REO including case studies, videos and technical data.
REO CALCULATOR – for steel reinforcement area calculations.
REO WIRE GAUGE – for measuring REOMESH® wire diameters.
REO BAR GAUGE – for measuring REBAR diameters.
NATIONAL PRODUCT & SERVICES CATALOGUE – the most comprehensive guide to reinforcing available anywhere today.
REINFORCING.COM – the online resource for products, technical data, case studies and testimonials that’s right at your fingertips.
REINFORCING.TV – our YouTube™ channel where you can see our products and services in action and listen to our customers talking about the benefits they get from using our reinforcing solutions.
To keep you up to date on all our reinforcing products, visit the ‘Register for Updates’ page at www.reinforcing.com
b h i it i f i
ooorrrcccciinnngg..tv
Along with REODATA, we also have a range of reinforcing essentials, uides and resources that will benefit your next project including:
VD combination for
www.reinwww.reinfwww.reinfori fww reinforww reinforww.reinforww reinwwww reinforwwww reinfowww.reinforwww reinfori freinfori fww reinforfreinfow reinfoforinforwww.reinforwww reinforww reinww.reinfw reinforw reinforeinforeinforwww.reeinforwwwwwww.reinforww.reinforww.reinfoww.reinforww.rreinfoee nnfororwwwwwww reinfowwwwww.reinforw.reinfrereinforreeinforinnforn oowww.reinforwwwww reinfowwwww.reinforwww.reinwwwwww.rww.reinforw.reinfww rreinforeinforreinfoowww.reinfwwwwww.ww.wwwwwwwww.rew.reinfo.reinfowww.reinforeeeinnnn oowwwwwwwwwwwwwwwwww.rrrreeeeii ffoooowww ww.w..rrreeeeiinnnnnnffooorcing coiing comicing.comcing.ciing.ccing.comcing.ccing.comcing.coming.comcing.comcing.comcing.comcing coming coing.comggcing.comng.comomccing.com cing.comciinnnng.congggng.comcing.ccing.com cccccocing.coomommmmmmmcing.comcc ng.comg.comg.ccing ccomcomcing.coing.commmmmmccing.com nnng.comnggg comg.cocoocoog.com mming.com cccinnng.cogggg.comcommmcing.coccing.com cing.comcing.cominng.comng.comnggg.comccciciinnng comooommmng.com g | www.rei| www.reiwww r| www.re| wwwwwwww| www.reiwww.www reiwww.reiwww.ww.rewww.w. www.rei| www.reiwww.reiw reiwww reiwww.reiii www.reiwwwwwww.rww.reiww rwwww.rw.rei| www.rei| www.reiw.rew.reiww.reiwwwww| wwww rww reew.re| www ree| www.rei www.reiwwwwww reiw wwww rewww.reiwww.rei| wwwwww.rewww| ww|| wwwwwwwwww w rre| www|| ww www wwwwwwwwwwwwwwwww..rer| www|| ww wwwwwwww www| wwwwwwwww.reeeeeii|| nfonfnnfffffnfonfonfnfonfofnnnffnnffffonfonffnffonnnnfnfnnnfnnnfo
guides and resources tha
REOWORKS – comprehensive CD and DVD combination foeveryeverythverything overything oerything oything oeverythieverytheverythveeereveryeveryterytryryyeveryyteve thintthheve hhhining n REO includn ing case studies, videosideosos and technicand technicand technical dataal data.tal data.aadataal dataatttaaatadata.daattal data.ddddadat .aalll d taa
REO CALCCALCLCCCCACCCALCCAALCAAALLLCCCCUUUUUUUUULATOLATAATATATTTOTOOOLATOATTTOTOOOLATOOOLLLLA RRRRRRRRRRR for steelt l– for steelfor– for stefor steel–– for st– ffor steel for forffor foor sr steror sterr ststeeeltteeeeeeeeell reinforcemereinforcemeforcemereinforcemereinforcereinreinfororcemerreinff eemmeeeeentnt ant arnt areaarea ct area calclrea calccnt area calccccalcarea calccaarea caarea calcea calcccrea rea caccaaaalca calccarrareea cccalnnttt aar aaa ccaannntt e cc ulations.ulatululuuuuluu
REERRERRREEEOOOOOOOO WWWWWWWIIIIRE GRRERRE GRERRREEEERE GGGRREEEEE E AAAAAAUGEUUUUGGGGEEE – for measuaaasssuuufor measu for measuo easuo eooooo easuring REOMMg REOMEring REOMEg REOMEring REOMEOMESng REOMESng REOMESREOMESring REOMESHring REOMESHg REOMESHng REOMREOMMREOMEring REOMESEEEOg REOg REOMMMMRg REnngring EOg ®® wire diameters.
REREREOOO BBAAAARRRRR GGGRRRRR GRRR GRRRRRRRR RR GAUGE – for measuring REBAR diameters.
NNNATIONANATIONATATIONAATIONALATIONALATIONALAATIONALTIONATIONALTIIONAOONALONALOONNNALONANATIONALAANATIONALLALATIONALNATIONALNANNATATIONALANATIONALATIOATIONALIONAOONALONAAONALLLNATIONALNNATIONALAATIOTIONIIOONNNAAAALNATIONNNNNATAAAA IONALIONOOONANNAAANATIOAATATTIIONALNAAAALLONNNNAANNAALL PPPPPRRRPPPPRPPRRRRPRPPPRPRRPRRRPPPRPPPRRRPRPRPRRRRPPPRROOOOOOOOOOOOOOOOOOOOOOOOOODDDDDDDDDDDDDDDDDDDDDD RVICES CATALOGUE – the mosststtttttttttttt comprehensivehhhhhhecompreheeeennomprehensm hompreheeeeenncomprehensivcomprehensivccomprehensivomprehenoomprehensomprehensmprehensmprehensimmprehensivmprehheeomprehenspprrr hheeneehhhhehensieeennenn i e gu einforcing a where today.ere todayere todayy.oere ydwwwwhhhere todayheere tod y.where todewhwwhhere tohhere todayheeeeerrrreeeehewhere todwhere todwhherhere todeerrre todayhere todaywhereee ttttoooddodwhere towwhere twhhhere eere e ttodare todaodwhere toddaaaayy.y..y
REREINFOINFOOORRRCINCINC NNGGG.G.GGGGGGGGGG COCOCOCOOO oducts,ucts,oodddod technical dechnical dechnical dechnicachnicalchnicalhhnical dhnical dh inicalnical diiicccalal dal dl dddddcal dechnical dhnnicanicalnniccal dalhnnnnicaa ddnnicicanniiicccanniiicanniicc atatttataataataattaaataatattaaataaaaatttaata, ata, a,,,case studiescase studiesase studiescasse studiesssesssuudiesudddddiieuuuddddddiieeudieessssse uudddddiiieessess annd tnd d tnd tnnananaaanaaanan nials that’s right at yo fififingertipsfingertipsfingertipsfi gefi gertfingefifififi p ..
REREINFOINFOOINNFINN RRCINCIIINNNNNNCINCINNNNNNNNNNGGGGGGGG.GGGTTTTTTTTTTTTT. rre you care you carrrr orrr n see our n see ouro roe our uuue ouuproducts andproducts aproducts andprodu t ddtts dproducts ad ttss dtts dp sucts a dddd servservseserere action and listen to ou customerscustomers customerscustomercustomsstt eerrrt ererssssc e sc eerrc rrsss c e ss s talking talking kktalking kkktttattataaatataaalkabout the beabout the bettthhhheee bebbthe bhe bebabout tthhhhee bee bebebeeeeaabout tttheee a tthhheebout ttthhe bettthhhhetthh e fitfififitnnenefifififitnefinefifififififififififinefifififi et from usin ooooooooorcing solutrcing sorcing sorcing so ttiircing sorcing so trcing so iiin so in o io iiooons.ns. ns. oooonoooonoonononon
TTTTTTTTTo keep you uo keep you o keep y uuukeep you uuuukeep you uukeep uuk o up p tpppp p pproropppp ducts, visitducts, visitvii, vis, vis, visvisiis, visitisitvii, visits, visitcts, visvisivv ss, vv sss isssd s viiis,, the the ththeet ethe thetTTTTTT‘Register foRegister fo‘Register foterer foer foeeister fo‘‘RRRReR gistereRRegRRegisRReeeeeggggister fgisRRegister fRegisRegggggiisssstttteeeer foRegReRegiReegister feggReg sstttteeeeerrrr ffgg rrr Ur Upr Uprr Ur Ur UpUpr Upr Urr UUpppUUUUUUppppp nnggggnngnngnngng.com.comom
ESSENTIAL TECHNICAL DATA ON STEEL REINFORCEMENT
DUUUDDUUUUUDDUUUUUDUDUUUDUUUUDUUUUCTCCCCCCCCCCCC & SERVERVERVICICICEES CATALOL Gduide to ridd to rto ro ro ro reeinforcing aeinforcing aeinforcing aeinforcing availablvailable anailable anye anyvaila eee ae availa eee aanye an annnnnnyyyyvail eee aanyanyaannanananyyyyanyee anyanaanynnyyyee anyanyannyyee aannnnyyyywwwwwwwwwwwwwwww
OOOOMOMOMMMMMOOOMO – tt th thethethehethe the ohe ohe ohe onhe online onlin– e resoure resource fsource fsource fource fource fource furce furce frce fooooororr proooo otesttesstistimtimtimmmomomoteestimimmes mimmtee timimmmmmm nials that’snials that’sals that’s right atright atat at atat t yt yt yyoyoyoat yyrig ur fififififi
TTTTTVVVVVVVVVVVVV ––––– our– our Yr YouTu––– o o oo be™ channannel nnel wwwhwhwhwhherrww rwwhwhww rrrvvvviicicicceesescesss is ininrvicc sviviic ssv ss action and listen tto oto oououuuuouuuurr ccr crtt ttthhhhetheyy gttttssss ttthhefittssss tthstfitttssss t et from using ourr reir reininnnnnffffonfoon
ttototooo o ddddadadatetee onddaa e ono o ddaaateteete onaatetee oeee ononnndaatteeee ooooonnatttee ooonnnaatttteeee oo all our reiall our reiall our reiall olaaaaaall ourllll ouall ooall ourall our reiaalll oull our rl oooouuu r nforrcingrcinggg g ppppppgg ppgg nnfor ppdapdaaatattttees’s’es’’aattteeees’pdatteeeeeses’aaaatttteees’eessss’ppdddddaaatttteeppppddddadaaaatttteeesppdaaatttteeeeesspp ppage at wwwpage at wwwage at wwwe at wge at wwwe ate at wwwpage at wwwe atge at wwwt wwt watge at wwwwat wwwpapage at wwwpage at wppage at wage at wage at wwwage age at wwwge at wwwee at wwwt wwwpage atpage at wwwwwwwwwwwwwwwpp ee at wwaattt wwwppppage at wwge at wwwaatt wwt wwwwwwppppaaaage aage at wwwgge at wwwe at wwwt wwwwwwwwpppage at wwwgee atee ataa wpp gge at wwwge at ww w wwppppp gg ..reinforei fffforinfor.reinforeinforcrcciciiinin.reinfre nneinfnffofnfoeinfooororrforrcccrcciiinnnnrer.rereeinfoeinfoeiinneinfreinforrccrccciiinnnnreeieiinnnffnfooorrnforccciinnnnn. n ofoorrrrccccciniinnnn.rereeiin orrrccciinnnn. inn oorrrccc nnn
REINVENTING
REINFORCIN
G
www.reinforcing.com
www.reinforcing. tv
4.0
Build with OneSteel Reinforcing
National Product & Services Catalogue 2011/2012
22Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Minimum Dimensions for Standard Shapes Processed to AS 3600 : 2009
Minimum Dimensions (mm) for R Rebar Standard Shapes that can be processed complying with AS 3600 : 2009
The pin sizes used in this table are for mild steel bars, which are not to be subsequently straightened or rebent. Values indicated are a guide only and may vary depending on equipment of supply locations. Some values are governed by processing equipment rather than minimum code requirements. If you require a shape smaller than indicated please contact your OneSteel Reinforcing representative for possible alternatives.
Rebar Type and Size
Code Pin Size
4db 5db 5db 5db 5db - 3db
a b a a a a a a
R6 165 40 200 80 90 80 150 150
R10 175 60 230 130 150 130 170 180
R12 185 75 250 155 160 155 200 195
Minimum Dimensions for Standard Shapes Processed to AS 3600 : 2009
Minimum Dimensions (mm) for Class N 500PLUS® REBAR standard shapes that can be processed
complying with AS 3600 : 2009
Rebar Type and Size
Code Pin Size
5db 5db 5db 5db 5db - 4db
a b a a a a a a
N10 130 80 170 130 150 130 400 140
N12 135 95 190 160 160 155 400 160
N16 150 125 220 210 210 210 420 210
N20 175 155 260 260 260 260 500 260
N24 205 185 315 315 315 315 550 315
N28 235 220 365 365 365 365 600 365
N32 265 250 420 420 420 420 800 420
N36 295 280 470 470 470 470 1000 -
N40 325 310 520 520 520 520 1200 -
The pin sizes used in this table are for hot-rolled deformed bars, which are not to be subsequently straightened or rebent. Values indicated are a guide only and may vary depending on equipment of supply locations. Some values are governed by processing equipment rather than minimum code requirements. If you require a shape smaller than indicated please contact your OneSteel Reinforcing representative for possible alternatives.
REBAR
RE
BA
R &
RE
OM
ES
H®
FREE REOWORKS CD/DVD!The ultimate reinforcing essential that has everything you need to know about ‘REO’.
• Case Studies and Videos• Design Guides, Product Brochures and more…
Call into your nearest branch or visit www.reinforcing.com for a copy today!oday!
!
National Product & Services Catalogue 2011/2012
23Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Processing 500PLUS® REBAR and Wire to AS 3600 : 2009
Technical Note
Rebar Bending and Rebending / Straightening Standard names and use:
• Bending of 500PLUS® REBAR should be carried out in accordance with Clause 17.2.3 of AS 3600 : 2009
• If engineers/builders request pin diameters smaller thanthose required by AS 3600, such bends can only be suppliedif the engineer gives written approval to the order.
• Rebending 500PLUS® REBAR on site – due to limitations of adequate rebending facilities on site, we recommend that the customer’s attention is drawn to the guidelines set out in AS 3600 and in the OneSteel Reinforcing 500PLUS® technical notes.
• Care must be taken when bending, straightening or rebending is performed on a construction site to ensure that the bend radii are not formed below the prescribed minimum sizes in AS 3600.
• OneSteel Reinforcing recommends that 500PLUS® TEMPCORE® be used in such situations for use as pull-out bars rather than MICROALLOY or CONTISTRETCH rebar.
Bending Reinforcing Bars to Clause 17.2.3.2:
Product Use Product Type Pin Size
(a) Fitments Ribbed or round Grade 500
wire & Grade 250 rebar3db
D500N bars 4db
(b) Reinforcement that is to be
galvanized or epoxy coated
(before or after bending)
≤ 16 mm diameter 5db
≥ 20 mm diameter 8db
(c) Reinforcement in which the bend
is intended to be straightened
or rebent
≤ 16 mm diameter 4db
20 mm or 24 mm diameter 5db
≥ 28 mm diameter 6db
(d) Other than specifi ed in (b)
or (c)Reinforcement of any grade 5db
REBAR
Bending & Rebending 500PLUS® REBAR
Diameter(mm)
AS/NZS 4671 Requirements
AS 3600 Requirements
TEMPCORE® 500PLUS® Capability
MICROALLOY & CONTISTRETCH
500PLUS® Capability
Galvanized Bars*
≤ 16 4db @ 90 deg5db generally, but 4db for fi tments
2db @ 180 deg 3db @ 180 deg 5db @ 180 deg
≥ 20 4db @ 180 deg5db generally, but 4db for fi tments
3db @ 180 degNot
produced8db @ 180 deg
* The bending limits shown in this column have been specifi ed in AS 3600 to minimise spalling of the galvanized coating.
A number of situations may arise where bars must be bent or rebent on site, or where pre-bent bars must be straightened.
For smaller diameter bars (i.e., 10, 12 & 16 mm), this is preferably performed at ambient temperature, as this has the least effect on steel properties.
In accordance with Clause 17.2.3.1 of AS 3600 : 2009, to cold bend D500N bars not exceeding 16 mm in diameter:
• The initial bend should be performed around a mandrel or former of diameter not less than 4db;
• Do not use impact blows to bend or rebend the steel; and
• Take care to minimise mechanical damage to the bar surface and visually inspect rebent area for cracks.
Diameter (mm)
TEMPCORE® 500PLUS® Capability
500PLUS®
MICROALLOY or CONTISTRETCH
Capability
AS 3600 Limits
≤ 16 2db @ 180 deg 3db @ 180 deg 4db
20 ≤ db ≤ 24 3db @ 180 deg Not produced 5db
28 ≤ db ≤ 36 6db - 6db
For larger diameter bars, the application of heat (e.g. from an acetylene fl ame) may be used to reduce the bending force, but a reduction in bar strength may result. Ref: AS 3600 : 2009 Clause 17.2.3.1(b)
Further details on bending/rebending and welding 500PLUS® REBAR can be found at www.reinforcing.com
A pipe must not be used to make the initial bend, or to rebend back past the straight position. Rebending of bars that have been bent prior to galvanizing is not recommended, as cracking on the inside of the original bend may result.
Rebending or straightening should be performed using a powered bending tool, or a pipe with an internal diameter not greater than 2x the nominal bar diameter.
RE
BA
R &
RE
OM
ES
H®
National Product & Services Catalogue 2011/2012
24Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Heating & Welding 500PLUS® REBAR
After heating, the resultant ambient temperature properties of reinforcing steels may be signifi cantly altered. This is an important consideration if heat has been applied to assist with bending bars through welding or the effect of fi re. To effectively control the temperature during the heating or welding process the use of temperature control crayons is recommended.
Heating Heating should be avoided if the original bar properties are required. Bending should always be around a former of the appropriate size (refer processing to AS 3600).
AS 3600 : 2001 states in Clause 19.2.3.1 and AS 3600 : 2009 in Clause 17.2.3.1 that reinforcement may be bent hot, provided that all of the following are complied with:
i) the steel is heated uniformly through and beyond the portion to be bent
ii) the temperature of the steel does not exceed 600oC
iii) the bar is not cooled by quenching
iv) if during heating the temperature of the bar exceeds 450
oC, the characteristic yield stress (fsy) of the steel
after bending shall be taken as 250 MPa.
Welding 500PLUS® REBAR produced by the TEMPCORE® process and microalloyed and CONTISTRETCH® 500PLUS® coiled rebar has a maximum carbon equivalent (Ceq) of 0.44 and, as such, requires no preheating prior to welding.
Preheating is not required when bars are welded in accordance with the AS/NZS 1554.3 : 2002, Structural steel welding. Part 3 : Welding of reinforcing steels. Hydrogen controlled electrodes are required for all weld types, and matching strength electrodes are required for butt welds.
Note: Some types of welded splices can reduce the ductility of the connected bars.
Threading 500PLUS® REBAR
Threaded 500PLUS® REIDBAR™
The design tensile capacities of fi ne-threaded 500PLUS® REBAR can be determined in accordance with AS 4100*. Based on the results of testing, fi ne-threaded 500PLUS® REBAR has a reduced characteristic yield stress equal to 75% of the normal characteristic yield stress (500 MPa) and a reduced characteristic tensile strength equal to 85% of the normal characteristic tensile strength (540 MPa) based on the thread stress area. It follows that OneSteel Reinforcing 500PLUS® REBAR when cut with AS 1275** metric threads and fi tted with AS 1112*** Property Class 5 nuts, has the values of design tensile capacity specifi ed in the adjoining table. These design tensile capacities are based on the effective tensile stress areas (As) from AS 1275**, a strength reduction factor φ = 0.8 and a characteristic tensile strength equal to 0.85 x 540 = 459 MPa.
Bar Diameter
(mm)
Normal Thread
Size
Stress Area
(mm2)
500PLUS® REBAR
Design Tensile Capacity (kN)
N12 M10 58 21N16 M12 84 31N20 M16 157 58N24 M20 245 90N28 M24 353 130N32 M30 561 205N36 M33^ 694 255N40 M36 817 300
500PLUS® REIDBAR™ is a hot-rolled, continuously coarse-threaded steel reinforcing bar that complies with the requirements in AS/NZS 4671 for Class N reinforcing.
When used in conjunction with accessories, it offers the designer fl exibility to overcome challenging design or buildability issues. These tables list the material properties and the common accessories available for 500PLUS® REIDBAR™. A 500PLUS® REIDBAR™ Design Guide and case studies are available from OneSteel Reinforcing or www.reinforcing.com
CouplerThreaded Insert**
Grout Sleeve
Nut***
RB12C RB12TI – RB12NRBA16C RBA16TI RBA16GS RBA16NRBA20C RBA20TI RBA20GS RBA20NRB25C RBA25TI RBA25GS RB25NRB32C RBA32TI RBA32GS RB32N
All accessories, except nuts, develop the breaking strength of 500PLUS® REIDBAR™. The load that a threaded insert can provide is dependent on its anchorage (refer to REIDBAR™ Design Guide). Nuts have a minimum strength corresponding to a bar stress of 1.15fsy
Design Tensile Capacity = φ As x 0.85 x TS where TS = 540 MPa
* – AS4100 : 1998 Steel structures** – AS 1275 : 1985 Metric screw threads for fasteners*** – AS 1112 : 2000 ISO metric hexagon nuts
^ Denotes second choice thread size. Nuts may be diffi cult to obtain. N.B. Engineers should be aware that threading reinforcing bars this way also reduces the ductility to less than the minimum requirements for Class N bars specifi ed in AS/NZS 4671.
Bar Diameter
(mm)
Cross-sectional
Area (mm2)
Yield Stress (MPa)
Design Yield
Capacity (kN)
Design Tensile
Capacity (kN)
Max Tensile Working
Load (kN)
Design Shear Capacity
(0.62 min ult) (kN)
Minimum Hole for
Clearance (mm)
Minimum Length ‘a’ for L bar with Coupler (mm)
(5db pin)
RB12 113 500 56.5 61.0 39.0 37.8 15 145
RBA16 201 500 100.6 108.5 70.0 67.3 20 185
RBA20 314 500 157.0 169.6 109.0 105.2 24 230
RB25 491 500 245.5 265.1 171.0 164.4 29 295
RB32 804 500 402.0 434.2 281.0 269.2 38 365
a
RE
BA
R &
RE
OM
ES
H®
REBAR
National Product & Services Catalogue 2011/2012
25Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Th
reade
d B
ar
Wall Bars/Starter Bars
Product Code
Dimensions (m)
Weight (kg)
N16L7070 0.7 x 0.7 2.3
N16L8080 0.8 x 0.8 2.6
N16L10018 1.0 x 0.18 1.9
N16L6060 0.6 x 0.6 1.9
N16L26015 2.6 x 0.15 4.5
ANFE5
Wall Bars/Starter Bars
Product Code
Dimensions (m)
Weight (kg)
N12L5050 0.5 x 0.5 0.9
N12L8020 0.8 x 0.2 0.9
N12L10015 1.0 x 0.15 1.05
N12L10020 1.0 x 0.2 1.07
N12L6060 0.6 x 0.6 1.09
N12L10515 1.05 x 0.15 1.09
N12L26015 2.6 x 0.15 2.5
ANFE1
Metric Threaded Bar
ProductCode
Height(mm)
Length(mm)
N12TB50 12 500
N16TB55 16 550
N16TB60 16 600
N20TB60 20 600
N20TB65 20 650
ATHRD
Need Cut or Bent Mesh?We can Cut and Bend mesh to meet just about any requirement and offer fast, reliable turnaround with short lead times.
Applications include: Barrier mesh, Precast Concrete, Footings, Safety Screens, Shelving & Displays, Pipe Encasement and Mining Applications.
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
26Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Deformed Reinforcing Bar AS/NZS 4671 – Class N
ProductCode
Mass (kg/m)
Length(m/t)
N10S 0.63 1582
Calculated mass includes an allowance for rolling variations as per our Terms and Conditions. Note: N40S is available only on request – Lead time required.
REBAR
ANS10
ANS12
ANS16
ANS20
Approximate Number of Bars Per Tonne
250R Plain Reinforcing Round Bar AS/NZS 4671
Diameter(mm)
Length6 m
Length7 m
Length8 m
Length9 m
Length10 m
Length12 m
Length15 m
10 264
12 183 157 137 122 110 92
16 103 88 77 69 62 51
20 66 56 50 44 40 33 26
24 46 39 24 31 28 23 18
28 34 29 25 22 20 17 14
32 26 22 19 17 15 13 10
36 20 17 15 14 12 10 9
40 7
Shaded areas are standard stock lengths. Not all stock lengths and diameters are available at all OneSteel Reinforcing Branches.
N12S 0.91 1099
N20S 2.53 395
N24S 3.64 275
N28S 4.95 202
N32S 6.47 155
N36S 8.19 122
N40S 10.11 99
N16S 1.62 617
Product Code
Mass (kg/m)
Length (m/t)
R10S 0.63 1582
R12S 0.91 1099
R16S 1.62 617
R20S 2.53 395
R24S 3.64 275
R28S 4.61 217
R30S 5.69 176
R32S 6.88 145
R36S 8.19 122
ARS10
ARS12
ARS16
ARS20
50
0P
LU
S®
RE
BA
R
National Product & Services Catalogue 2011/2012
27Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
50
0P
LU
S® B
AM
TE
C®
500PLUS® BAMTEC® – ‘Rollout Carpet’ Concrete Slab Reinforcing System
Product Code Product Description
N10BM 10 mm 500PLUS® REBAR BAMTEC®
N12BM 12 mm 500PLUS® REBAR BAMTEC®
N16BM 16 mm 500PLUS® REBAR BAMTEC®
N20BM 20 mm 500PLUS® REBAR BAMTEC®
N24BM 24 mm 500PLUS® REBAR BAMTEC®
N28BM 28 mm 500PLUS® REBAR BAMTEC®
N32BM 32 mm 500PLUS® REBAR BAMTEC®
N36BM 36 mm 500PLUS® REBAR BAMTEC®
500PLUS® BAMTEC® is the world’s fastest steel fi xing system. It involves prefabricating reinforcing steel “carpets” to a wide range of shapes and sizes.
Individual reinforcing bars are welded to fl exible steel straps and the resultant “carpet” is rolled up for transport and handling. The carpets can contain hundreds of bars which may be of different length and diameter, with variable spacings that accommodate complex shapes and penetrations. When needed on site, the carpet is simply lifted into place and unrolled onto continuous bar chairs.
Benefi ts• Faster construction• Save up to 80% on steel-fi xing costs• Ideal for suspended slabs, slab on ground, CRCP and
tilt-up panels• Improves cost effectiveness of slab construction• Variable spacing and bar diameters available• Improved accuracy and quality• Less material waste and scrap• Redesign and detailing assistance available• Can contribute to earning Green Star® points on projects• Less bending and carrying• Easier chairing and no bars to sort
• Simpler marking plan
Ask for our BAMTEC® design assistance and take advantage of a revolution in steelfi xing!
JN
REINFORCING.TVOur latest videos and case studies are right here to view on our new YouTube™ website. It’s here you’ll discover why so many projects big and small use OneSteel Reinforcing products.
Visit us now on www.reinforcing.tv
National Product & Services Catalogue 2011/2012
28Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
50
0P
LU
S®
RO
MT
EC
H®
500PLUS® ROMTECH® Lattice Girders
ROMTECH® Lattice Girders in conjunction with shotcrete, are an increasingly popular strata control method in tunnelling applications.
They provide a high strength-to-weight ratio, are available in a wide range of sizes, and can accommodate complex radial geometries.
When used with mesh or fi bre reinforced concrete, they form a continuous reinforced concrete shell, which can support both temporary and permanent loadings.
Benefi ts• Suitable for hard rock and soft ground conditions
• Available in a wide range of cross sectional sizes and designs
• Lightweight and easy to handle on site
• Simple connection details for easy installation
• Fast installation reducing shotcrete cycle times
• Reduced shotcrete shadowing
Need more technical data? NEW REODATA 4.0
Available Now!
To receive your FREE copy, call into your nearest branch or visit www.reinforcing.com
3
www.reinforcing.com | www.reinforcing.tv 3
Along with REODATA, we also have a range of reinforcing essentials,
guides and resources that will benefit your next project including:
REOWORKS – comprehensive CD and DVD combination for
everything on REO including case studies, videos and technical data.
REO CALCULATOR – for steel reinforcement area calculations.
REO WIRE GAUGE – for measuring REOMESH® wire diameters.
REO BAR GAUGE – for measuring REBAR diameters.
NATIONAL PRODUCT & SERVICES CATALOGUE – the most
comprehensive guide to reinforcing available anywhere today.
REINFORCING.COM – the online resource for products, technical data,
case studies and testimonials that’s right at your fingertips.
REINFORCING.TV – our YouTube™ channel where you can see our
products and services in action and listen to our customers talking
about the benefits they get from using our reinforcing solutions.
To keep you up to date on all our reinforcing products, visit the
‘Register for Updates’ page at www.reinforcing.com
a?
earestst
fooorrcrcccicininngngg.g.tvtv3
Along with REODATA, we also have a range of reinforcing essentials,
uides and resources that will benefit your next project including:DVD combination for
wwwww.reinforcwwwwww.reinfor
ww.reinforcww.reinforww.reinforcww.reinforww.reinforc
w.reinfow.reinforcw.reinfor
www.reinfowww.reinforcwww.reinwwww.reinforwwwwwww.reinforc
ww.reinforcwwww.reinforc
w.reinforcw.reinforc
www.reinfreinforcinforwww.reinforcwww.rewwwwwwww rwwwwwww.reinfow.reinforc
w.reinforcrreinforcr nforcfwww.reinforcwwwwww.reinfoww.reinfor
wwwwwwww.reinforcw.reinfo.reinforeinforc
ww.reeeinforcfnfowwwwwww.reinfor
wwwwwwww.reinforcw rreinfoinnnforc
wwwwww.reinforcww.reinfww.reinfwwwww.w.rereree orwwww.w..rrrreeeiiinnfofooorcc
w.w.rrereeeiiinnnffffoorceiiinnnffofoorccffffoooorrrrccing.com |ing.com | ing.com | ing.com ing.com iingngnging.com |ing.com | ing.com | ing.coininging.com ng cong.cogg.com |com |comcoing.coing.com | innnnggng.com | comcomoming.com |ing.com |ing.ciinnnngging.com | ccccomm ||ing.cong.com |ning.cnggg.comg.com.com.com | coooommminnng.comngggg.comccommmmming.com |nnng.comccom comcommcom |mm ||g.com |g.com |g mmm | mmom ||g com |g ccoo |||mmm | | ||| www.rewww.wwwwww.reinfo
www.reinfowww.reinfowwwwww.rwwww.reinfow.rei www.reinfo www.reiwww.reinwwwwww.reinw.reinfoww.rew.reinfw.r.reinfowwwwwwwww.reinwwww reinfw reinforww reiww.reinfoeinf ww wwwwwwwwwwwwww.reinww reiww..reinforrereeeinreinf ww wwwwwwwwwwwwww.reinfoeeinreinnfwwwwwwwwwwwwwwwwwww.rrereinfnnfnfwwwwwwww..rreineinnnf.reinffowww.ree nnfeiinnfff
guides and resources thaREOWORKS – comprehensive CD and DVD combination foor
eveverythingeverytheveryvvverything oerything on
erything on everytheverythivere ything on everyeveryeryrryeverythingryeverythyyyte yttthinthhhihhhi REO including case studies, videos and tec
deos and tecos and hnical data.hnical datanical datl tadaataataatl dattataaall ddddadadata.attatal data.ll tat
REOO CALCCCACCCCALCCACALCCAALALCALLLCCCCCUUUUUUUULATOLATLATOLATOLATOAATOATATOTTOTOOOL TOOOOORRRRRRRRRRR – for steel r– for steel r– for steel ror steel r–– for steel r– for steel r––– for st– for steel reel for forforfoor steel rfor sor sr stor ster stesteetteeeeeel einforcement a
einforcement aeinforcement aeinforcemeeinforcementeinfoeinforceeiinnf emmennt aeeennnntntt t aaat at aaaarerea crea calculatiocrea calcrea calcurea calculcula calculal
rrea caeea ceaa ca caaaallca calcccuurea calculateaeaa caaallclccccacaa ns.
REERRRRRRERREEEEOOOOOOO WWWW WWWWWIIIRE GRE GRRE GRRRREEREE GRREEE GEEE AAAAAAUGEUUUGUUUGUGGGEEE – for measuri for measur for measurifor measurifor measurifffor mor mear measur measurirr mmeasumeasuasuu iing REOMnng REOMng REOMg OMEEEESES
ng REOMESHng REOREOMESRng REOMESHOOMng REOMESEOMEREOMEng REOMEg REOMESESng REOMESSng Rng RREEOOMM SH® wire diameters.
REREREOOO B B AAARRRR RR GRRR GGRRRRR GGRRRRR GRRRR R GGRRR GGAUGE – for measuring REBAR diameters.
NNNATIONALNNATIONAATIONNATIONALNATIONATIONNNAATIONALATIONALAATATIOTIONATNNNATIOATIONALATATATIOTTTIIONAOONALONANATIONNAATIOAATIONALTTIONALIOONNNANANAAANATIOATIOATATTIOTIONONALONALNNAALLTTIONIOONNALAAALLLOOONNAAALLLNNNAALLLNNNAALLL PPPPPRRRPRPRPPPRRRRRRPPRPRPPRRRRPPPPRRRPRPPRRRRRPPRRRROOOOOOOOOOOOOOOOOOOODDDDDDDDDDDDDDDDD
RVICES CATALOL GUE – the mosststtttttttttstt t
ccomprehensive comprehensivccomprehensicoomprehensomprehensiveehcompreheoomomprehensm hhhemprehmpmpprehensivhheeepr hhheeeenneeehenshhhensiveennhheeneeenn vev gugu
where tre towhere toe toe twwhere twhere there twhwherereheww ewhewwhwhhehhhereherehhheeer twwhereeerrrerehere tohheree ttre ttooototooodaydday.y.dddday.dddadaydaaaayyyy..yy
REREINFONFOORRRRCICINCINNGG.G.GGG.GGG COCOCCOCO
oducts, techoducts te hhhho
hhhoducts, techn
ddddu hnhnnncc nnnnnnnniiiiciciiiccccal dataal dataal datalcal datacal datiiccal d tcal daaal datal datadaical dataddatacal daiccal datacal dacacal data,aal datal data,datadatical dattcal dataiiccccacal data, dddattaaiiicca aaatatacca ta,tal data,
case studies acase studies ast ssuuud sse uuuuddddidiudies auuuddddidiies aes eesddddidiieies ees aes as as aaaaannd tnd nnd ttnnnndnddnnn
fififingerfifinfingerfifingefifi gefifi tips.tips.ps
REREREINFOINFOINFOOIN RRCINININNNCININNNNINNNNNNNNGGG.GGGG.GTTTTTTTTTTT..
errererrrere you can see e you can see e you can see
u can see our our ourourour oouuuur
products and products and
rod tproducts andu ttproducts atstststs dd sd ss d sdd sd d d serverveee
cccustomccustomccustomcustostomcccu mers talking ers taerrs trs talking eers trsrsss keerrs ta kkkieersrrs tterrss ts ss ttatala
about thabout the benabout tbabouabout ttthhhhttthhhheeee bee benebbbabou ttthhhehee benebenebeeennnttththhhhee ennbeneetttthhheeetthhhe eneeeee benebbb eefifitfififitfififififittfifitfifififififififi
orcing sooorcing sooorcing scing sooo in oo nn oooolutions. luttiiiotiioioooonns. tioonontiontionoon .
TTTTTo keep you uo keep you uo keep yokeep uup up uup puupou uuuup t
products, vproducts,products, vprppr c s vvp ss, vdu s, v, vvvs,, vvvsss,s, v,, vvviisiisisiissiititisit the sit the isit theisiitisissi tthess eiisiss et
TTTTTT‘Register forRegister for‘RRRRegister forRegisterRegister RegisRReReeegistegister forerRegister for Register for Regiegeggggii eer forRRRRegegeggggister fiisss rr
ggg sststttee rtttteeeererr rrr ff roooorr UUpUpUUpUpUpUUUUUpUpppppp
ng.comg.comngngngngngngngg mmESSENTIAL TECHNICAL DATA ON STEEL REINFORCEMENT
DUDDUUDDDUUUDDDUDUUUUDDUUUUDDDUUUCTCCCCCCCC & SERVERVRVICICICEES CATALOOGuide to rididid to reto reinfo reinfo reinfo reinforcing availa
orcing availaorcing availorcing availabailabailable anywle ananyweee aanee anywe anywanaaanee anywe anywanywanaaanyannyyye anye e anywanyaanyye anywwwwee anywe anyaa ywaanaannnywwywyywwCOMCOMOOMMOMMMCOCOMOMMOMOM – t– t– the– thethe– thethe the othe othe o– he othe onhe online he online resourresource fsource foource foource foource fource fource force fource foororor pfor rorooo
testitetesteseestistimtimtimmmmmmonialmonialtimmmmtitimimmmm als that’s rights that’s rights that’s rig at at at atat yt yt yat at yt yyyyoyour fifififififiTTTTTVVVVVVVVVVVVVV ––– our our Y–– ur YouTube
––– oooo™ channnel wnnel wwwwwwwhwhherwwhhewherererer
rvrvrvivicicicicecescesrvviviciceess ivicic ss inin actessvi eses ion and listen to oto oououuuurr cou cuur cur cccttfitttssss ttthfittssss ttthhhhthetheyy get fsss thefittsss tfitfitttss tt
rom using ourr r reireinininnfnfnffofonfonnfoinfon ottotoo o dddadao d tattedaate on allo atate ateee on all
ddddaatattteteeate tteteee e on aonn alaattte ooon allonnon aeeee on aonnn aln alon alooo aaalallaalll our reinforc our reinooou orcirciouooour uuuur reirr n ngngg g g pppprg g pg ppprgg prppp
pdadpdaatp aatttteeteeseses’s’’pppdpdddaaaatttteeeeseses’s’pppdapdpdddadaaaatttteeeesesss’s’’p aatttteesaaatttteeeesessss page at wwpage at wwwpage at www.rpppage at wwwpage at wpage at www.rage at www r
page at www.rpage at www.rpapage at www.rppppage at www.rage at www.rage at wage at wwwge at wwwgeppp ge at www.rgeee at wtttpppppapage at wwe at www.re at www.ratt www.tge at www
ge at ww pppage at www.r
age at wwagage at www rgee at wwwatat wwge at www.ww
pp gee at wwwatat wwt www.rwww.rwwwwww rt www.rwwww.rp ggg aaatat ww.w.r
g aat www rwww.ww. einfoeiniieeinnnnfofffeinfoeinfoeinfoeeeinfoeinfoinnnforeinffonfoorreinforcieeinfoininnfonnforrrcrcccrciiicingeinfoeininnfffofooorrrcrcccciiinncingngeeiininn oorrrcrcccciiinnngngnnnfforrrcrcccciiinnngoorrrccciinnngngccccinngng
REINVENTING
REINFORCINGw
ww.reinforcing.com
www.reinforcing. tv
4.0
Build with OneSteel Reinforcing
Giving our customers a voice!We’re always looking for feedback on how we can improve our products and services to you. That’s why we’ve developed REO RESPONSE. We value your opinions that go into helping us become a “Better and Different” reinforcing company.
Visit www.reinforcing.com or email [email protected]
National Product & Services Catalogue 2011/2012
29Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Bar C
hairs
Concrete Block Chairs – Galvanized Tie Wire
ProductCode
Height (mm)
No./BagMass
(kg/Bag)
CB20G 20 125 17
CB25G 25 125 18
CB30G 30 100 17
CB35G 35 100 18
CB40G 40 75 16
CB45G 45 75 18
CB50G 50 60 17
CB55G 55 50 19
CB60G 60 40 18
CB65G 65 40 20
CB70G 70 30 19
CB75G 75 30 19
CB80G 80 25 15
CB85G 85 25 17
CB90G 90 25 18
CB95G 95 25 19
CB100G 100 20 18
CB110G 110 20 20
Concrete Block Chairs – Plain
Product Code
Dimensions(mm)
No./BagMass
(kg/Bag)
CB653 65 x 50 x 32 50 20
CB654 65 x 50 x 40 50 23
CB754 75 x 50 x 40 50 25
CB765 75 x 65 x 50 25 or 50 14 or 27
CB777 75 x 75 x 75 25 29
CB1077 100 x 75 x 75 20 29
CB1119 115 x 100 x 90 10 23
accessoriesconcrete&building
• Sets concrete cover• Heat tolerant• Multiple heights
Ideal for: Slab on ground
• Complies with Roads Authority requirements
• Sets concrete cover• Heat tolerant• Stable – wider base and
integrated galvanized tie wire
Ideal for: Slab on ground, civil & infrastructure projects
H24
H23
Concrete Block Chairs – Galvanized Tie Wire (Max Frank)
Product Code
Height (mm)
No./Bag
MFCB30G 30 250
MFCB40G 40 160
MFCB50G 50 80
Ideal for: Slab on ground, civil & infrastructure projects
H37
National Product & Services Catalogue 2011/2012
30Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Bar C
hairs
accessoriesconcrete&building
Fibre Concrete Single Spacers With Gal Wire (Max Frank)
Fibre Concrete Combination Spacers (Max Frank)
Fibre Concrete Combination Spacers With Gal Wire (Max Frank)
H43
H41
H40
Product CodeHeight(mm)
No./BagMass
(kg/Bag)
FCSS30G 30 500 22
FCSS35G 35 500 32
FCSS40G 40 250 20
FCSS50G 50 250 30
FCSS55G 55 250 34
Product CodeHeight(mm)
No./BagMass
(kg/Bag)
FCCS345 35 x 40 x 50 250 23
FCCS456 45 x 55 x 60 125 19
FCCS567 50 x 60 x 70 125 29
Product CodeHeight(mm)
No./BagMass
(kg/Bag)
FCCS345G 35 x 40 x 50 250 24
FCCS456G 45 x 55 x 60 125 19
Fibre Concrete Single Spacers (Max Frank)
H44
Product CodeHeight(mm)
No./BagMass
(kg/Bag)
FCSS35 35 500 31
FCSS60 60 200 28
FCSS70 70 100 18
National Product & Services Catalogue 2011/2012
31Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Fibre Concrete Spacers With Steel Clips – 70 mm (Max Frank)
Fibre Concrete Triangular Bar (Max Frank)
Fibre Concrete Rail Bar (Max Frank)
H46
H38
H42
Product CodeHeight(mm)
Width(mm)
No./BagMass
(kg/Bag)
FC5070SC 50 70 50 8
FC5570SC 55 70 75 13
FC7070SC 70 70 50 10
Product CodeHeight(mm)
Length(mm)
No./PalletMass
(kg/Bag)
FCTB55330 55 330 400 568
Product CodeHeight(mm)
Length(mm)
No./PalletMass
(kg/Bag)
FCRB50330 50 330 1080 616
FCRB70330 70 330 800 700
FCRB1001000 100 1000 500 860
Fibre Concrete Spacers With Steel Clips – 40 mm (Max Frank)
H45
Product CodeHeight(mm)
Width(mm)
No./BagMass
(kg/Bag)
FC3540SC 35 40 250 15
FC4040SC 40 40 250 18
FC7040SC 70 40 200 24
• Spacer for vertical elements • preformed groove
• Spacer for vertical elements • preformed groove
• Continuous spacer for ease of steel fi xing
• Continuous spacer for ease of steel fi xing• Curve-shaped for stabilityB
ar Ch
airs
National Product & Services Catalogue 2011/2012
32Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Fibre Concrete Banana Bar (Max Frank)
H39
Product CodeHeight(mm)
Length(mm)
No./PalletMass
(kg/Bag)
FCBB30330 30 330 2700 756
FCBB50330 50 330 1080 626
FCBB70330 70 330 1080 630
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
• Curve-shaped for stability
Bar C
hairs
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
National Product & Services Catalogue 2011/2012
33Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal Bar Chairs
ProductCode
Height(mm)
No./BagMass
(kg/Bag)
MC20 20 100 2
MC25 25 100 2
MC30 30 100 2
MC35 35 100 2
MC40 40 100 3
MC45 45 100 3
MC50 50 100 5
MC60 60 100 5
MC65 65 100 6
MC70 70 100 6
MC75 75 100 6
MC80 80 100 7
MC85 85 100 7
MC90 90 100 7
MC100 100 100 8
MC110 110 50 6
MC120 120 50 6
MC130 130 50 6
MC140 140 50 7
MC150 150 50 7
MC160 160 50 7
MC170 170 50 10
MC180 180 50 10
MC190 190 50 11
MC200 200 50 11
MC210 210 50 12
MC220 220 50 12
MC230 230 50 12
MC240 240 50 13
MC250 250 50 14
MC260 260 50 14
MC270 270 50 15
MC280 280 25 8
MC290 290 25 8
MC300 300 25 8
MC310 310 25 8
MC320 320 25 9
MC340 340 25 9
MC350 350 25 9
MC360 360 25 9
MC380 380 25 10
MC400 400 25 11
• Plastic tipped to minimise corrosion
• Sets concrete cover• Four leg wire bar chairs
Ideal for: Suspended slab, slab on ground with metal base.
Note: Steel Reinforcement Institute of Australia Technical Note 3 January 2007.
H14
Restrictions on the use of Wire Bar Chairs
Plastic-tipped wire bar chairs should not be used within 1 km of the coast.
AS 3600. Concrete Structures. Table 4.3, classifi es exterior above-ground environments that are within 1 km of a coastline as B2 in any climatic zone.
It is now considered that plastic-tipped wire chairs should not be used in B2 or more severe environments.
This restriction has been established after bar chair load tests and the potential for corrosion of chairs and subsequent staining of concrete surfaces in B2 environments.
As from 1st July 2006, SRIA advises reinforcement companies to schedule plastic bar chairs for all projects that are known to be within 1 km of the coast.
Metal Bases
Product Code
ProductDescription
No./Bag
MB Square base – suit metal chair ≤ 110 mm 100
MBL 230 dia. base – suit metal chair ≥ 110 mm 50
MBS 150 dia. base – suit metal chair ≤ 110 mm 100
• For use with plastic tipped metal chairs• Corrosion resistant steel• Ideal for spreading point loads from
bar chairs over wider area of support
• Ideal for protecting polythene fi lm from puncture by legs of bar chairs
Ideal for: Slab on groundH26
Bar C
hairs
National Product & Services Catalogue 2011/2012
34Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Metal Bar Chairs – Continuous
• Plastic tipped to minimise corrosion• Continuous spacer• Allows rapid placement and chairing• Provides stable support for reinforcing
H21
ProductCode
Height(mm)
Length(m)
No./Bag
CBCG20 20 2 10
CBCG25 25 2 10
CBCG30 30 2 10
CBCG40 40 2 10
CBCG50 50 2 10
CBCG60 60 2 10
CBCG65 65 2 10
CBCG75 75 2 10
CBCG90 90 2 10
CBCG100 100 2 10
• Other Sizes Available• Minimum Volume and
Lead Time Apply
Ideal for: Suspended slab, slab on ground with concrete blinding layer.
Plastic Bar Chairs – Combination
ProductCode
Height(mm)
No./Bag
COM2540 25 or 40 100
COM5065 50 or 65 100
COM5065C 50 or 65 100
COM7590 75 or 90 100
COM7590C 75 or 90 100
COM85100 85 or 100 100
COM105110 105 or 110 100
COM115120 115 or 120 100
COM125130 125 or 130 100
COM135140 135 or 140 100
COM145150 145 or 150 100
COM155160 155 or 160 100
COM165170 165 or 170 100
• Sets concrete cover• Dual heights• Clip-on mechanism for
stability• Integrated base to minimise
puncture of polythene fi lm
*C = Clip-on
Ideal for: Slab on ground, polystyrene pod slab, swimming pools. H30
Top Hat Base
ProductCode
Suit Bar(mm)
Length(mm)
THB16 16 500
• Serves as base for U-Bars that support top layer reinforcing steel• Sits on second layer reinforcing steel• Other sizes available on request
Ideal for: Deep raft slab construction.
H31
Plastic-tipped wire bar chairs should not be used within 1 km of the coast.
Restrictions on the use of Wire Bar Chairs
Bar C
hairs
National Product & Services Catalogue 2011/2012
35Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Plastic Bar Chairs – Combination Deck Chair
ProductCode
Height(mm)
No./Bag
COMDC2025 20 or 25 100
COMDC2530 25 or 30 100
COMDC3035 30 or 35 100
COMDC3040 30 or 40 100
COMDC3540 35 or 40 100
COMDC3545 35 or 45 100
COMDC4050 40 or 50 100
COMDC4550 45 or 50 100
COMDC6575 65 or 75 50 or 100
COMDC7590 75 or 90 50 or 100
COMDC90100 90 or 100 50 or 100
COMDC110120 110 or 120 50 or 100
COMDC130140 130 or 140 50 or 100
COMDC150160 150 or 160 50 or 100
COMDC170180 170 or 180 50 or 100
COMDC190200 190 or 200 50 or 100
COMDCBASE – 100
• Sets concrete cover• Dual heights• Corrosion-free support
Ideal for: Suspended slab & beams, tilt-up panels, precast panels & beams,slab on ground when used with base.
H1
Plastic Bar Chairs – Novabones
Product Code
Height(mm)
No./Bag
FAST2530 25 or 30 100
FAST4050 40 or 50 100
FAST6070 60 or 70 50
• Designed for heavy duty application• Suits large bar diameter• Central hole for tie wire
• Withstands high ambient temperature• Approved for Main Roads (WA) projects
Ideal for: Columns, super T beams, civil projects, slab on ground with blinding layer. H4
Plastic Bar Chairs – Circular Clip-On
ProductCode
Concrete Cover(mm)
Suit Bar Size(mm)
No./Bag
CPC15 15 4 – 16 100
CPC20 20 4 – 16 100
CPC206 20 6 100
CPC25 25 4 – 16 100
CPC25A 25 12 – 2 0 100
CPC30 30 4 – 16 100
CPC30A 30 12 – 2 0 100
CPC40 40 4 – 16 100
CPC40A 40 12 – 2 0 100
CPC50 50 8 – 12 100
CPC50A 50 12 – 2 0 100
CPC60 60 8 – 12 100
CPC60A 60 12 – 2 0 100
CPC65 65 8 – 12 100
CPC75 75 8 – 12 100
CPC75A 75 12 – 2 0 100
• Provides constant cover• Easy clip-on• Wide range to suit
different bar sizes• Stable from twisting
Ideal for: Columns & piers, civil precast and commercial construction.
H18
Bar C
hairs
National Product & Services Catalogue 2011/2012
36Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Plastic Bar Chairs – Clipfast
Product Code
Height(mm)
Suit Bar Size(mm)
No./Bag
PC20B 20 4 – 16 100PC25B 25 4 – 16 100PC30B 30 4 – 16 100PC32B 32 4 – 16 100PC35B 35 4 – 16 100PC40B 40 4 – 16 100PC50B 50 4 – 16 100PC55B 55 4 - 16 100PC65B 65 4 – 16 100PC75B 75 4 – 16 100
PC40B+ 40 16 – 2 8 100PC45B+ 45 16 – 2 8 100PC50B+ 50 16 – 2 8 100PC50BP 50 - Type B 16 – 2 8 100PC55B+ 55 16 – 2 8 100PC65B+ 65 16 – 2 8 100PC65BP 65 - Type B 16 – 2 8 100PC75B+ 75 16 – 2 8 100
PCB – Base 100
• Designed specifi cally for bar• Easy clip-on• Small foot confi guration –
minimal exposure at concrete surface
• Suits different bar sizes
Ideal for: Precast and tilt-up. walls and panels.
+ = Large
H17
Plastic Mesh Chairs – Clipfast
ProductCode
Height(mm)
No./Bag
PC20M 20 100PC25M 25 100PC30M 30 100PC32M 32 100PC40M 40 100PC50M 50 100PC65M 65 100PC75M 75 100
Ideal for: Precast and tilt-up, walls & panels.
• Designed specifi cally for mesh• Easy clip-on• Small foot confi guration – minimal exposure at concrete surface• Suits different wire sizes H16
Plastic Bar Chairs – Clipfast
Product Code
Height(mm)
No./Bag
RSOG95 95 100RSOG95C 95 100RSOG100 100 100
RSOG100C 100 100RSOG110 110 100
RSOG110C 110 100RSOG115C 115 100RSOG120 120 100RSOG130 130 100RSOG140 140 100RSOG150 150 100
Ideal for: Deep ground slabs and roadways, commercial & civil projects.
• Lightweight chairs with integral bases• Load tested to exceed 500 kg
*C = Easy clip-on H27
Bar C
hairs
National Product & Services Catalogue 2011/2012
37Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Plastic Bar Chairs – Combination Heavy Duty Clip-On
Product Code
Height(mm)
No./Bag
COM3034HDC 30 or 34 100
COM3539HDC 35 or 39 100
COM4044HDC 40 or 44 100
COM4549HDC 45 or 49 100
COM5054HDC 50 or 54 100
COM6064HDC 60 or 64 100
COM6569HDC 65 or 69 100
COM7074HDC 70 or 74 100
COM7579HDC 75 or 79 100
COM8084HDC 80 or 84 100
Ideal for: Civil projects. precast, suspended slab.
• Load tested to exceed 200 kg• Easy clip-on• Grey colour to match concrete
• Suits different bar & mesh sizes,horizontal & vertical applications
H32
Plastic Bar Chairs – Continuous
ProductCode
Height(mm)
Length(mm)
No. Per Bundle
CC20 20 2000 100
CC25 25 2000 100
CC30 30 2000 100
CC40 40 2000 50
CC50 50 2000 50
• Continuous spacer• Allows rapid placement and chairing• Provides stable support for steel reinforcing• Ideal for structures near the coast – corrosion free support
Ideal for: 500PLUS® BAMTEC® and suspended slab.
H20
Plastic Bar Chairs – Continuous Zig Zag
ProductCode
Height (mm)
Length (mm)
No./Bag
ZZ20CP 20 2000 50
ZZ25CP 25 2000 50
ZZ30CP 30 2000 50
ZZ40CP 40 2000 40
ZZ50CP 50 2000 40
ZZ65CP 65 2000 40
• Continuous spacer• Allows rapid placement and chairing• Provides strong and stable support for steel reinforcing
Ideal for: 500PLUS® BAMTEC®. suspended slab, slab on ground with concrete blinding layer. H28
Bar C
hairs
National Product & Services Catalogue 2011/2012
38Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Plastic Bar Chairs – REIDBAR™ Tilt Wall Panel
Product Code
Suit Panel Thickness(mm)
No./Bag
RBTICHAIR 125 – 200 90
• Designed to enable REIDBAR™ inserts to be easily used for near face applications• Fully adjustable • Can be used for all metric and coil thread inserts with appropriate nailing plate
Ideal for: Precast and tilt-up panels.
Plastic Bar Chairs – Tilt Wall Panel
Product Code
Height(mm)
No./Bag
BCTWP5060 50 or 60 100
BCTWP6575 65 or 75 100
• Push-on clip mechanism• Dual heights• Dimples at leg base for minimal concrete surface exposure• Strong and stable
Ideal for: Precast and tilt-up panels.H2
S276
Plastic Bar Chairs – Continuous Deck Rails
ProductCode
Height (mm)
Length (mm)
No./Bag
CDR25C 25 750 25
CDR30C 30 750 25
CDR35C 35 750 25
CDR40C 40 750 25
CDR45C 45 750 25
CDR50C 50 750 25
CDR55C 55 750 25
CDR60C 60 750 25
CDR65C 65 750 25
CDR70C 70 750 25
CDR75C 75 750 25
CDR80C 80 750 25
CDR85C 85 750 25
CDR90C 90 750 25
CDR95C 95 750 25
CDR100C 100 750 25
CDRBASE Base 740 25
• Continuous spacer• Allows rapid placement
and chairing• Provides strong and stable
support for reinforcing• Minimum soffi t exposure• Plastic base to suit slab
on ground application
Ideal for: 500PLUS® BAMTEC®, precast, tilt-up panels, suspended slab, slab on ground with concrete blinding layer.
H8Note: When using Deck Rail Base, customers should consider the 5 mm thickness which will affect concrete cover.
Bar C
hairs
National Product & Services Catalogue 2011/2012
39Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Plastic Bar Chairs – BLOCKAID© (for Reinforced Masonry)
Product Code Masonary BlockNo.
Per BoxMass
(kg/Box)
BACL190 190 mm Centrally located 300 6
BANCL190 190 mm Non-centrally located 300 6
BANCL290 290 mm Non-centrally located 200 6
• Accurate positioning of reinforcement in masonry• Ensures adequate grout cover• Aligns control joint dowels• Ensures construction meets specifi cation
Ideal for: Reinforced masonry block walls.H35
Kwik Zip Centralisers
Product CodeBow Height
(mm)Suit Bar Size
(mm)No.
Per BoxMass
(kg/Box)
KWIKZIP10 10 20 - 50 100 1.45
KWIKZIP20 20 20 - 50 100 1.67
KWIKZIP30 30 20 - 50 100 2.00
KWIKZIP40 40 20 - 50 100 2.69
Bow Height = distance between the surface of the bar and the hole.
H47
Bar Size(mm)
No. of Units per assembly
20 - 28 2
32 - 40 3
50 4
• Spacers for soil nails• Wide bow and simple integrated “cable tie” method of assembly
Bar C
hairs
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
40Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Plastic Trench Mesh Support
ProductCode
Height(mm)
Suit Wire(mm)
No./Bag
TMS65 65 8 – 12 25
TMS6016 60 16 25
Trench Mesh Spacers – Metal (Bogar Enterprises)
ProductCode
Suit Trench Mesh Wire(mm)
Height(mm)
No./Bag
BS8150 8 150 100
BS8200 8 200 50
BS8250 8 250 100
BS8300 8 300 50
BS8400 8 400 50
BS8450 8 450 50
BS8500 8 500 50
BS11200 11 200 50
BS11250 11 250 100
BS11300 11 300 50
BS11350 11 350 50
BS11400 11 400 50
BS11450 11 450 50
BS11500 11 500 50
BS12200 12 200 50
BS12250 12 250 100
BS12300 12 300 50
BS12350 12 350 50
BS12400 12 400 50
BS12450 12 450 50
BS12500 12 500 50
• Support and locate trench mesh• Suits all trench mesh sizes
Ideal for: Footing beams, waffl e pod slab perimeter.
• Joins bottom and top trench mesh to form footing cage
Ideal for: Footing beams.
H12
S19
TMS65 Action
TMS65 Modfi x
Bar C
hairs
Ask us about larger size mesh to suit your project
Talk to OneSteel Reinforcing early in your project for producing larger size and customised mesh sheets
• Reduces lapping, cutting and waste• Suited to residential and commercial projects• Cut & Bent service and delivery to site available
made to size
National Product & Services Catalogue 2011/2012
41Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Plastic Bar Chairs – Foundation Frame
ProductCode
Height(mm)
No./Bag
FF1520 150 or 200 50
FF2530 250 or 300 50
FF3540 350 or 400 50
• Support and locate trench mesh• Suits all trench mesh sizes• Joins bottom and top trench mesh to form footing cage
H10
Plastic Bar Chairs – Hinge Pile Wheel
Plastic Bar Chairs – Heavy Duty Pile Wheel
ProductCode
Concrete Cover(mm)
Suit Bar(mm)
No./Bag
CPCH75 75 Up to 12 72
ProductCode
Concrete Cover(mm)
Suit Bar(mm)
No./Bag
CPCH50HD 50 10 – 20 60
CPCH75HD 75 10 – 20 58
CPCH80HD 80 10 – 20 50
CPCH85HD 85 10 – 20 50
CPCH100HD 100 10 – 20 39
• Circular plastic spacer• Provides perimeter cover• Hinge clip mechanism for ease of installation• Wider fl ange rim and rigid spoke wheel design against skew action• Suits different bar sizes
• Circular plastic spacer• Provides perimeter cover• Push fi t for ease of installation• Wider fl ange rim and rigid spoke wheel design against skew action• Suits different bar sizes
Ideal for: Pile cages, raked pile.
Ideal for: Pile cages. H9
H34
Plastic Bar Chairs – Pile Cage Foot
ProductCode
Height(mm)
Suit Bar(mm)
No./Bag
PCF85 85 20 – 40 60
PCF150 150 20 – 40 40
• Ensures correct cover at the bottom end of the reinforcing pile cage• Load tested to exceed 500 kg
Ideal for: Pile cages.
H33
Bar C
hairs
National Product & Services Catalogue 2011/2012
42Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Tie
Wire
accessoriesconcrete&building
Tie Wire – Pre-Cut Black
ProductCode
Diameter(mm)
Length(mm)
Mass(kg)
TWC11 1.6 280 3
TWC14 1.6 355 3
TWC125280 1.25 280 3
TWC125355 1.25 355 3
• Pre-cut lengths• Suitable for tying bars and mesh
Tie Wire – Belt Pack Black
ProductCode
Diameter (mm)
Length(m)
Mass(kg)
BP1.4 1.4 100 1.2
BP1.5 1.6 94 1.42
• Annealed wire• Suitable for tying bars and mesh
S200
Tie Wire – Roll Black
Product Code
Diameter(mm)
Length(m)
Mass(kg)
TW 1.6 60 1
TW5 1.6 320 5
TW10 1.6 650 10
TW14 1.4 60 0.75
TW75 1.6 4875 75
TW315 3.15 16 1
• Suitable for tying bars and mesh S204
S202
Tie Wire – Belt Pack Galvanized
ProductCode
Diameter(mm)
Length(m)
Mass(kg)
BP1.5GAL 1.6 85 1.5
• Annealed wire• Suitable for tying bars and mesh
S201
National Product & Services Catalogue 2011/2012
43Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Tie
Wire
accessoriesconcrete&building
Block Wall Ties
Product Code No. Per Bundle
BWT250 50
Bond Beam Ties
Product Code
Description No./Bag
BBVT V Tie 100 –
BOP Block Out Plate 100
WLIGS Ligature 100
• Used in pairs at 600 mm centres to tie-in unreinforced block walls• Controls cracking of corners where blocks do not intersect or overlay
BLOCK OUT PLATESIdeal for: Closing-off concrete blocks where core fi lling is not required beneath bond beams, lintel beams or sill beams
W LIGSIdeal for: Holding bars in bond beams and block walls where two bars are specifi ed
Bag Tie – Black
ProductCode
Length(mm)
No. Per Bundle
BT110 110 2000
BT125 125 2000
BT150 150 2000
BT175 175 2000
BT200 200 2000
S10
Bag Tie – Galvanized
ProductCode
Length(mm)
No. Per Bundle
BT110G 110 2000
BT125G 125 2000
BT150G 150 2000
BT200G 200 2000
• Annealed• Four different lengths• Loops on both ends for ease of fi xing
S9
S226
S21
National Product & Services Catalogue 2011/2012
44Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Ste
el F
ixing
Too
ls
Steel Fixing Tools
accessoriesconcrete&building
Product Code Description
ACROW-TOOL Bag Tying Tool
RTWTOOL Twisting Tool - Rod Tie Wire
TTOOL Twisting Tool - Bar Tie
BPREEL Belt Pack Reel - Alloy
REEL Belt Pack Reel - Plastic
IDLREEL Belt Pack Reel
IDLBELT Belt To Suit Reels
TTMS Small Hand Twisting Tool
Nips
ProductCode
DescriptionLength(mm)
KNIPSC200 Crescent Nips 200
KNIPSK200 Nips 200
KNIPSK280 Nips 280
• Tools for tying wire
• Suitable for cutting tie wire
S224
S102
Need Cut or Bent Mesh?We can Cut and Bend mesh to meet just about any requirement and offer fast, reliable turnaround with short lead times.
Applications include: Barrier mesh, Precast Concrete, Footings, Safety Screens, Shelving & Displays, Pipe Encasement and Mining Applications.
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
45Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Po
lyth
en
e B
uild
ing
Film
Polythene Building Film – Medium Impact Orange
ProductCode
Thickness Width(m)
Length(m)
Mass(kg)
PBO34 300 4 25 28
PO22 200 2 50 18
PO24 200 4 50 36
Polythene Building Film – Medium Impact Black
ProductCode
Thickness Width(m)
Length(m)
Mass(kg)
PB141 100 4 100 36
PB22 200 2 50 18
PB24 200 4 50 36
PB2425 200 4 25 18
PB26 200 6 33 36
PB26300 200 6 50 54
PB34 300 4 50 54
Polythene Building Film – High Impact Black
ProductCode
Thickness Width(m)
Length(m)
Mass(kg)
PB22H 200 2 50 18
PB2425H 200 4 25 18
PB24H 200 4 50 36
PB26H 200 6 33 36
accessoriesconcrete&building
POLYTHENE BUILDING FILM• Complies with requirements of AS/NZS 2904 : 1995
Damp-proof courses and fl ashings• See also AS 2870 : 2011 Residential Slabs & Footings• High and Medium Impact• Black, Orange and Clear• Wide range of widths, lengths and thicknesses to suit
construction requirements
Ideal for: Slab on ground, moisture and water barrier, overlay curing sheets for newly poured concrete.
S141
S140
S145
National Product & Services Catalogue 2011/2012
46Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Tape
Tape
ProductCode
Width(mm)
Length(m)
Colour
PTR 48 30 Silver
PVC 48 75 Orange
• For joining and sealing polythene building fi lm
accessoriesconcrete&building
Polythene Building Film – Medium Impact Clear
ProductCode
Thickness Width(m)
Length(m)
Mass(kg)
PN053 50 3 100 14
PN12 100 2 100 9
PN14 100 4 100 18
Polythene Building Film – High Impact Orange
ProductCode
Thickness Width(m)
Length(m)
Mass(kg)
POV24H 200 4 25 18
POV34H 300 4 25 27
POV26 200 6 33 36
POV22 200 2 50 18
POV24 200 4 50 36
S144
S143
S197
Mesh for small projectseshh fffor smalll projjjeMMeNEW and improved
Easy to handle & legal to transport 4 m x 2 m mesh sheets.
• New design with reduced fl ying ends (from 100 to 20 mm)
• Up to 8% improved mesh cover through lap effi ciency across and along the sheet
• Ideal for driveways, paths and smaller concreting jobs
Call into your nearest branch or visit www.reinforcing.com
™eco mesh
National Product & Services Catalogue 2011/2012
47Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
els
accessoriesconcrete&building
Round Dowels – Black
Round Dowels – Galvanized
Product Code
Diameter (mm)
Length(mm)
R16D300FG 16 300R16D400FG 16 400R16D450FG 16 450R16D500FG 16 500R16D600FG 16 600R16D1000FG 16 1000R20D300FG 20 300R20D450FG 20 450R20D600FG 20 600R20D1000FG 20 1000R24D350FG 24 350R24D450FG 24 450R24D600FG 24 600R24D1000FG 24 1000
• Friction cut• Provide positive load
transfer across the joints• Smooth bars allow
movement in the joint due to shrinkage and temperature changes
Note: Dowels are sold per unit. ARDFGE
Square Dowels – Galvanized
Product Code
Size(mm)
Length(mm)
SQ16D400FG 16 400SQ16D500FG 16 500SQ16D600FG 16 600SQ20D400FG 20 400SQ20D500FG 20 500SQ20D600FG 20 600SQ25D400FG 25 400SQ25D500FG 25 500SQ25D600FG 25 600
• Friction cut• Provide positive load transfer across the joints• Smooth bars allow movement in the joint due to shrinkage and temperature changes
Note: Dowels are sold per unit. ASDFGE
Product Code
Diameter (mm)
Length(mm)
R16D300F 16 300R16D400F 16 400R16D450F 16 450R16D500F 16 500R16D600F 16 600R16D1000F 16 1000R20D300F 20 300R20D450F 20 450R20D600F 20 600R20D1000F 20 1000R24D350F 24 350R24D450F 24 450R24D600F 24 600R24D1000F 24 1000
ARDFE
National Product & Services Catalogue 2011/2012
48Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
els
accessoriesconcrete&building
Square Dowels – Black
ProductCode
Size (mm)
Length (mm)
SQ16D400F 16 400
SQ16D500F 16 500
SQ16D600F 16 600
SQ20D400F 20 400
SQ20D500F 20 500
SQ20D600F 20 600
SQ25D400F 25 400
SQ25D500F 25 500
SQ25D600F 25 600
ASQDFE
Diamond® Dowels – Black (Danley®)
Product Code
ColourPlate Thick-
ness(mm)
Size(mm)
No. Per Box
DDDBLNP6 Orange 6 110 x 110 25
DDDBLNP10 Blue 10 110 x 110 15
S44
Diamond® Dowels – Galvanized (Danley®)
ProductCode
ColourPlate
Thickness(mm)
Size(mm)
No. Per Box
DDDGNP6 Orange 6 110 x 110 25
DDDGNP10 Blue 10 110 x 110 15
S45
• Available with colour coded one-piece PVC sleeves; 6 mm orange and 10 mm blue• Dowel plates available in black, galvanized and stainless steel• High load capacity• Minimise differential defl ection between slabs• Allow two directional movement in the horizontal plane• Ideal for perimeter-of-pour dowel applications, i.e. at construction joints• Nailing fl ange provides secure attachment to form boards• Flange on sleeve ensures dowel is perpendicular to form board and is stable• Supplied with fi xing nails
Ideal for: Construction joints.
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
National Product & Services Catalogue 2011/2012
49Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
els
accessoriesconcrete&building
Shear Load Connectors – Stainless steel (Ancon®)
Product Code
Dowel Diameter
(mm)
Dowel Length (mm)
Sleeve Length (mm)
TypeLateral
Movement
ESD10 20 300 300 Single No
ESD15 22 300 300 Single No
ESD20 30 300 300 Single No
ESDQ10 20 300 300 Single Yes
ESDQ15 22 300 300 Single Yes
ESDQ20 30 300 300 Single Yes
DSD25 14 250 250 Double No
DSD30 16 260 260 Double No
DSD50 18 280 280 Double No
DSD65 20 300 300 Double No
DSD75 22 340 340 Double No
DSD100 30 400 400 Double No
DSD130 35 470 470 Double No
DSD150 42 550 550 Double No
DSDQ30 16 260 260 Double Yes
DSDQ50 18 280 280 Double Yes
DSDQ65 20 300 300 Double Yes
DSDQ75 22 340 340 Double Yes
DSDQ100 30 400 400 Double Yes
DSDQ130 35 470 470 Double Yes
DSDQ150 42 550 550 Double Yes
• More effective at transferring load and allowing movement
• Easier to fi x on site
• Sleeve is nailed to the formwork ensuring subsequent alignment with the dowel component
• Member 2012. Elimination of corbel method of construction
Ideal for: Slab-to-slab, slab-to-column, fl oor-to-wall connections and structural movement joint
S7
Biscuit Plate Dowels – Black (Connolly®)
S325
Biscuit Plate Dowels – Galvanized (Connolly®)
ProductCode
Plate Thickness(mm)
Size(mm)
No. PerBox
BPD6G 6 110 x 150 10
BPD10G 10 110 x 150 10
ProductCode
Plate Thickness(mm)
Size(mm)
No. PerBox
BPD6B 6 110 x 150 10
BPD10B 10 110 x 150 10
• Lateral and end expansion capabilities• Can be attached to both timber and steel formwork
Ideal for: Construction joints
• Lateral and end expansion capabilities• Can be attached to both timber and steel formwork
Ideal for: Construction joints
S324
National Product & Services Catalogue 2011/2012
50Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
els
accessoriesconcrete&building
Square Dowel - Flange Dowel Box with Black Dowels (Danley®)
Product Code Dowel Size (mm)
Flange Box Length (mm)
FDBS16B 16 x 400 220
FDBS20B 20 x 400 220
FDBS25B 25 x 400 220
FDBS28B 28 x 400 220
FDBS32B 32 x 400 220
FDBS40B 40 x 400 220
Suited for use in construction joints in both ground slabs and elevated slabs.
• Can be used in elevated slabs as a shear connector• Suitable for post-tension slab joints• Allow for large lateral movement• Have expansion joint capability• Available in galvanized or stainless steel• Boxes formed from galvanized steel sheet with rigid foam void fi ller inside box• Integral nailing fl anges with location marks• Available for 16 – 40 mm square dowels• For use with square dowels only
S336
Square Dowel - Flange Dowel Box with Galvanized Dowels (Danley®)
Product Code Dowel Size(mm)
Flange Box Length(mm)
FDBS16G 16 x 400 220
FDBS20G 20 x 400 220
FDBS25G 25 x 400 220
FDBS28G 28 x 400 220
FDBS32G 32 x 400 220
FDBS40G 40 x 400 220
S337
Staifi x Lockable Dowel (Ancon)
Product Code
Size(mm)
Sleeve Size(mm)
Application
ESDQL20 30 x 450 170 x 245 Slab to Slab
HLDQL30 30 x 490 170 x 280 Slab to Slab High Load
ESDQL20W 30 x 282 170 x 245 Slab to Wall
SKS24 40 x 150 Threaded Anchor for ESDQL20W
RESIN1.5KG Resin
Lockplate Locking Plate
S331
• Designed for use at temporary movement joints
• Allows initial shrinkage of concrete to take place and is then locked in position with a mechanical plate and epoxy resin
• Locked dowel continues to transfer sheer but prevents further movement taking place
• Eliminates the need for complicated form-work
Ideal for: Slab-to-slab, slab-to-wall, connections
National Product & Services Catalogue 2011/2012
51Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el C
radles
Square Dowel Cradles - Black (Danley®)
Product Code
Size(mm)
Cradle Length(m)
DDCSQ16 16 3
DDCSQ20 20 3
S68
Round Dowel Cradles – Black (Danley®)
Product Code
Diameter(mm)
Cradle Length(m)
DDCR16 16 3
DDCR20 20 3
S63
Round Dowel Cradles – Galvanized (Danley®)
Product Code
Diameter(mm)
Cradle Length(m)
DDCR16G 16 3
DDCR20G 20 3
• Manufactured to meet the specifi cations of road authorities and specifi c projects.
• Round dowels of 16, 20, 24, 27, 30, 33, 36, 39, and 42 mm diameter to AS/NZS 3679.1 : 2010 Structural steel – hot-rolled bars and sections are available in stainless steel, black, galvanized and shrink wrapped.
• A fully welded prefabricated dowel cradle with shrink wrapped round dowels.
S64
Note: For larger size dowels, length is limited by maximum weight of 25 kg that can be safely handled by one man; or to specifi c lengths as specifi ed by the customer
Square Dowel Cradles – Galvanized (Danley®)
Product Code
Size(mm)
Cradle Length(m)
DDCSQ16G 16 3
DDCSQ20G 20 3
• Suitable for contraction joints in concrete slabs and pavements.
• Ensures the dowels are set at the exact height for the specifi ed slab thickness, and at precise spacing.
• Consists of a fully welded prefabricated dowel cradle with square dowels and either Dowelmaster® or metal dowel covers.
• Available in 16, 20, 25, 28, 32, and 40 mm dowel sizes
• Available for slab thicknesses from 100 to 300 mm
• High load capacity• Dowels available in black,
galvanized and stainless steel
S69
• Available for slab thicknesses from 100 – 300 mm
• Dowels available in black, galvanized and stainless steel
• Sizes up to 24 mm• Manufactured as specifi ed for
pavement thickness, dowel spacing, materials and fi nish.
National Product & Services Catalogue 2011/2012
52Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el C
radles
accessoriesconcrete&building
Plate Dowel Cradles – Black (Danley®)
Product Code
Plate Width(mm)
Plate Thickness
(mm)
Plate Length (mm)
Plate Spacing
(mm)
SuitSlab (mm)
CradleLength
(m)
DCP6350150 50 6 300 350 150 3
DCP6300230 50 6 300 300 230 3
DCP6400100 50 6 300 400 100 3
DCP6450100 50 6 300 450 100 3
DCP6450125 50 6 300 450 125 3
DCP6450130 50 6 300 450 130 3
DCP6450150 50 6 300 450 150 3
DCP6450175 50 6 300 450 175 3
DCP6450200 50 6 300 450 200 3
DCP6600150 50 6 300 600 150 3
DCP10450150 50 10 300 450 150 3
DCP10450175 50 10 300 450 175 3
DCP10450200 50 10 300 450 200 3
DCP10450250 50 10 300 450 250 3
DCP10500150 50 10 300 500 150 3
DCP10500175 50 10 300 500 175 3
DCP10500200 50 10 300 500 200 3
DCP10500225 50 10 300 500 225 3
DCP10600150 50 10 300 600 150 3
DCP10600200 50 10 300 600 200 3
S58
Plate Dowel Cradles – Galvanized (Danley®)
Product Code
Plate Width(mm)
Plate Thickness
(mm)
Plate Length (mm)
PlateSpacing
(mm)
SuitSlab (mm)
CradleLength
(m)
DCP6300150G 50 6 300 300 150 3
DCP6300230G 50 6 300 300 230 3
DCP6450120G 50 6 300 450 120 3
DCP6450150G 50 6 300 450 150 3
DCP6450175G 50 6 300 450 175 3
DCP6450200G 50 6 300 450 200 3
DCP6600125G 50 6 300 600 125 3
DCP10450150G 50 10 300 450 150 3
DCP10450175G 50 10 300 450 175 3
DCP10450200G 50 10 300 450 200 3
DCP10450250G 50 10 300 450 250 3
DCP10500200G 50 10 300 500 200 3
DCP10600150G 50 10 300 600 150 3
DCP10600200G 50 10 300 600 200 3
• Consist of a plate dowel secured in a fabricated cradle• Suited for contraction joints• High load capacities• Limits differential deformation between slabs• Available for slab thickness 100 – 300 mm• Dowels available in black, galvanized and stainless steel
Ideal for: Contraction joints. S59
National Product & Services Catalogue 2011/2012
53Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el C
radles
accessoriesconcrete&building
PD3 Dowel® Cradles – Galvanized (Danley®)
ProductCode
Plate Thickness
(mm)
Dowel Length (mm)
Dowel Spacing
(mm)
SuitSlab (mm)
CradleLength
(m)
PD306450125G 6 300 450 125 3
PD306450150G 6 300 450 150 3
PD306450175G 6 300 450 175 3
PD306450200G 6 300 450 200 3
PD310450150G 10 300 450 150 3
PD310450175G 10 300 450 175 3
PD310450200G 10 300 450 200 3
• Available in 6 or 10 mm thick dowels spaced at 450 or 600 mm centres, and for slab thicknesses ranging from 125 to 300mm (not all sizes listed above)
• Tapered plate dowels 300 mm long; made from AS/NZS 3679.1 grade 300 steel
* PD3 Dowel® Cradles have the same load transfer capacities and defl ection characteristics as rectangular Plate Dowel Cradles™
S280
PD3 Dowel® Cradles – Black (Danley®)
ProductCode
Plate Thickness
(mm)
Dowel Length (mm)
Dowel Spacing
(mm)
SuitSlab (mm)
CradleLength
(m)
PD306450125B 6 300 450 125 3
PD306450150B 6 300 450 150 3
PD306450175B 6 300 450 175 3
PD306450200B 6 300 450 200 3
PD310450150B 10 300 450 150 3
PD310450175B 10 300 450 175 3
PD310450200B 10 300 450 200 3
S279
REINFORCING.TVOur latest videos and case studies are right here to view on our new YouTube™ website. It’s here you’ll discover why so many projects big and small use OneSteel Reinforcing products.
Visit us now on www.reinforcing.tv
National Product & Services Catalogue 2011/2012
54Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el C
radles
accessoriesconcrete&building
Plate Dowel Cradles – Black (Connolly®)
S323
Plate Dowel Cradles – Galvanized (Connolly®)
• Pre assembled & welded to ensure accuracy • Built to specifi cations to minimise installation time • Custom cradles are available
S322
Product Code
Plate Width(mm)
Plate Thickness
(mm)
Plate Length (mm)
Plate Spacing
(mm)
SuitSlab (mm)
CradleLength
(m)
CCP6450125G 50 6 300 450 125 3
CCP6450150G 50 6 300 450 150 3
CCP6450175G 50 6 300 450 175 3
CCP6450200G 50 6 300 450 200 3
CCP10450180G 50 10 300 450 180 3
CCP10450200G 50 10 300 450 200 3
CCP10450250G 50 10 300 450 250 3
ProductCode
Plate Width(mm)
Plate Thickness
(mm)
Plate Length (mm)
Plate Spacing
(mm)
SuitSlab (mm)
CradleLength
(m)
CCP6450125 50 6 300 450 125 3
CCP6450150 50 6 300 450 150 3
CCP6450175 50 6 300 450 175 3
CCP6450200 50 6 300 450 200 3
CCP10450180 50 10 300 450 180 3
CCP10450200 50 10 300 450 200 3
CCP10450250 50 10 300 450 250 3
Reduce Your Slab Costs• Fixed square metre price
• Reduces on-site labour requirements
• The Waffl e Slab package includes: Plastic sheeting, Polystyrene waffl e pods, Spacers, Reinforcing bars, ONEMESH®, Tie wires, Bar chairs and Tape
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
55Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el S
leeves
accessoriesconcrete&building
Round Dowel Sleeves – Dowelsert (Reid®)
Round Dowel Sleeves – Speed Sleeve® (Danley®)
Product Code
DescriptionSuit Dowel Diameter
(mm)Length(mm)
DSPSLR1620 Sleeve 16 240
DSPSLR1630 Sleeve 16 310
DSPSLNP16 Nailing Pl ate 16 –
DSPSLR2020 Sleeve 20 240
DSPSLR2030 Sleeve 20 310
DSPSLNP20 Nailing Plate 20 –
ProductCode
Suit Dowel Diameter(mm)
Length(mm)
DWLSERT16 16 200
DWLSERT20 20 300
• Two piece cast-in socket for construction joint dowels • High density black polypropylene ensuring positive bearing capacity between
the dowel and concrete
• Eliminates need for drilling form boards• Eliminates greased bars• Minimises vertical movement at joints• Reduces damage at joints• Suitable for galvanized dowels• Reusable nailing plate• Available for 16 and 20 mm diameter dowels• Standard length 240 and 310 mm to suit 400 and 600 mm long dowels• Nailing plates available for fi xing to forms (sold separately)
S76
S66
Note: For all ONEMESH® applications and services available see above or page number XX.
Round Dowel Sleeves – Universal (Connolly®)
ProductCode
Suit Dowel Diameter(mm)
Length(mm)
UDSR12150 12 150
UDSR16230 16 230
UDSR16300 16 300
UDSR20230 20 230
UDSR20300 20 300
UDSR24230 24 230
UDSR33230 33 230
UDSR33300 33 300
• Plastic• Twists in & locks into all Connolly Key Joint & Expansion Joint Systems • Easily fi xed to timber and/or steel formboards• All sleeves come with Support Leg and Nail on Plate• Colour-coded for easy identifi cation
S320
National Product & Services Catalogue 2011/2012
56Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Dow
el S
leeves
accessoriesconcrete&building
Square Dowel Covers – Galvanized (Danley®)
ProductCode
Suit Dowel Size(mm)
Length(mm)
SQDC16200 16 200
SQDC16250 16 250
SQDC16300 16 300
SQDC20200 20 200
SQDC20250 20 250
SQDC20300 20 300
SQDC25200 25 200
SQDC25250 25 250
SQDC25300 25 300
To suit anticipated dowel movement both perpendicular and parallel to the joint.
• Prevents slab lock-up• Standard sizes available for 16 - 40 mm square dowels• Standard type has 5 mm compressible foam each side• Other sizes available on request
S67
Square Dowel Sleeves – Universal (Connolly®)
Product Code
Suit Dowel Diameter(mm)
Length(mm)
UDSSQ16230 16 230
UDSSQ16300 16 300
UDSSQ20230 20 230
UDSSQ20300 20 300
S321
• Plastic• Twists in & locks into all Connolly Key Joint & Expansion Joint Systems • Easily fi xed to timber and/or steel formboards• All sleeves come with Support Leg & Nail on Plate• Colour-coded for easy identifi cation
Note: For all ONEMESH® applications and services available see above or page number XX.
Square Dowel Sleeves – Dowelmaster® (Danley®)
ProductCode
DescriptionSuit Dowel Size
(mm)Length(mm)
DWLM16 Sleeve 16 200
DWLM16NP Nailing Pl ate 16 –
DWLM20 Sleeve 20 250
DWLM20NP Nailing Pl ate 20 –
• Plastic• Allows slab movement in two directions• Available for 16 and 20 mm square dowels• Suits both 300 and 400 mm long dowels• Prevents slab lock-up• Nailing plate available for wood forms• Supplied with fi xing stake and wedge• Compatible with Danley® Keyjoint
S227
National Product & Services Catalogue 2011/2012
57Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Safety
Cap
s
accessoriesconcrete&building
Round Dowel Caps – Plastic
Round Expansion Caps Plastic
ProductCode
Suit Dowel Diameter(mm)
No. PerBag
DCP16 16 100
DCP1620 16 or 20 100
DCP2024 20 or 24 100
DCP24 24 100
ProductCode
Suit Dowel Diameter (mm)
No. PerBag
DCPX 12 – 20 100
EC24 24 100
• Allows longitudinal movement• Designed with hinged cap providing fi rm fi t over the dowel• 10 mm internal pin to locate dowel centrally and to create void for expansion
Ideal for: Round dowels.
• Allows longitudinal movement
Ideal for: Round dowels. S136
S231
Safety Caps Plastic
ProductCode
Colour No. PerBag
BSC Yellow 100
• Suits all bar sizes• Reduces the chance of cuts and abrasions from exposed bar ends• Coloured for visibility• Not designed for high load vertical impacts
Ideal for: Bar ends, star pickets.S182
Safety Caps Plastic – Andy (Aus Fin Co)
ProductCode
Suit Bar(mm)
ColourNo. Per
Bag
ACAP10 10 Green 50
ACAP12 12 Blue 50
ACAP16 16 Yellow 50
• Reduces the chance of cuts and abrasions from exposed bar ends• Coloured for visibility and to suit specifi c bar size
Ideal for: Bar ends. S229
National Product & Services Catalogue 2011/2012
58Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Safety
Cap
s
Safety Caps Plastic – Reosok® (Danley®)
Safety Caps Plastic – Life Guard™ (Danley®)
Safety Caps Plastic – Cushion Caps (Connolly®)
ProductCode
Suit Bar(mm)
ColourNo. Per
Bag
REOSOK12 12 – 20 Yellow 50
REOSOK24 24 – 36 Orange 50
ProductCode
Suit Bar(mm)
ColourNo. Per
Bag
LIFEGUARD1220 12 – 20 Yellow 50
LIFEGUARD2436 24 – 36 Orange 50
ProductCode
Suit Bar(mm)
ColourNo. Per
Bag
SCC1220 12 – 20 Green 50
SCC2036 20 – 36 Green 50
accessoriesconcrete&building
• Protection from exposed or protruding reobars on-site• Yellow to suit bars from 12 - 20 mm nominal diameter • Orange to suit 24 - 36 mm nominal diameter bars and star pickets • High visibility• UV Stabilised polypropylene• Reusable
Ideal for: Bar ends, star pickets.
• High visibility Yellow to suit bars from 12 - 20 mm nominal diameter • High visibility Orange to suit 24 - 36 mm nominal diameter bars and star pickets • Manufactured from robust, UV Stabilised polypropylene • Encapsulated domed steel plate 2 mm thick with central raised boss • Internal ribs within sleeve to hold cap centrally on bar
Ideal for: Bar ends, star pickets, safety barriers.
• Safety caps for reinforcing bars• Refl ective material • Recyclable plastic
S61
S232
S319
Reduce your steelfi xingPrefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
National Product & Services Catalogue 2011/2012
59Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Exp
ansio
n J
oin
t
accessoriesconcrete&building
Expansion Joint – Ablefl ex
Expansion Joint Sticky Back – Ablefl ex
ProductCode
Height(mm)
Thickness(mm)
Length(m/roll)
AFX1050 50 10 25
AFX1075 75 10 25
AFX10100 100 10 25
AFX10125 125 10 25
AFX10150 150 10 25
AFX10200 200 10 25
AFX10300 300 10 25
AFX12100 100 12 25
AFX12125 125 12 25
AFX12150 150 12 25
AFX12200 200 12 25
ProductCode
Height(mm)
Thickness(mm)
Length(m/roll)
AFX1050S 50 10 25
AFX1075S 75 10 25
AFX10100S 100 10 25
AFX10125S 125 10 25
AFX10150S 150 10 25
AFX10200S 200 10 25
AFX10300S 300 10 25
• Strip is easily removed • Flexible, lightweight and can be formed around curved objects• Easy to install S1
S233
Building a Concrete Pool?Our guarantee of quality and performance is POOLSTEEL® from OneSteel Reinforcing.
• POOLSTEEL® is designed specially for concrete pools• POOLSTEEL® meets or exceeds standards AS/NZS 4671 : 2001, Steel reinforcing
materials & AS 2783 : 1992. Use of reinforced concrete for small swimming pools
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
60Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Exp
ansio
n J
oin
t
Expansion Joint – Jointex
ProductCode
Height(mm)
Thickness(mm)
Length(m)
JNTX50 50 10 2.4
JNTX75 75 10 2.4
JNTX100 100 10 2.4
JNTX125 125 10 2.4
JNTX150 150 10 2.4
JNTX200 200 10 2.4
accessoriesconcrete&building
• A compressible bitumen-impregnated joint fi ller used to seal movement joints in concrete slabs and elements
S100
Expansion Joint – Ridge Flex
ProductCode
Height(mm)
Thickness(mm)
Length(m)
RF75 75 10 2.4
RF100 100 10 2.4
S179
Call into your nearest branch or visit www.reinforcing.com for a copy today!oday!
NEW REOWORKS CD/DVD5!The reinforcing essential that has everything you need to know about ‘REO’ has been revised and is Available Now!
• New Case Studies and Videos• Design Guides. Product Brochures and more…
National Product & Services Catalogue 2011/2012
61Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Crack-A
-Jo
int
®
accessoriesconcrete&building
Crack-A-Joint® (Danley®)
ProductCode
DescriptionHeight(mm)
Length(m)
CRAKJ25 Plain 25 3
CRAKJ45 Plain 45 3
CRAKJ45GC Permanent 45 3
CJS25025 Support Stakes 250 –
• Initiates a contraction joint in the slab• No need to saw cut• Rigid• Joined using the joining clips• Available with Rip-A-Strip™ capping• Roll formed from a pre-galvanized strip
Crack Inducer Capping – Crack-A-Joint® (Danley®)
ProductCode
Height(mm)
Length (m)
Colour
CJR253B 25 3 Black
CJR253G 25 3 Grey
CJR253S 25 3 Sandstone
CJR253T 25 3 Terracotta
CJR453B 45 3 Black
CJR453G 45 3 Grey
CJR453S 45 3 Sandstone
CJR453T 45 3 Terracotta
• Available in 4 colours • Easy removal of concrete slurry from top of joint• Permanent – prevents dust and grit penetration
S41
S43
Mesh for small projectseshh fffor smalll projjjeMMeNEW and improved
Easy to handle & legal to transport 4 m x 2 m mesh sheets.
• New design with reduced fl ying ends (from 100 to 20 mm)
• Up to 8% improved mesh cover through lap effi ciency across and along the sheet
• Ideal for driveways, paths and smaller concreting jobs
Call into your nearest branch or visit www.reinforcing.com
™eco mesh
National Product & Services Catalogue 2011/2012
62Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Crack In
du
cers
accessoriesconcrete&building
Ground Crack Inducers (Danley®)
ProductCode
Height(mm)
Length(m)
Suit Slab(mm)
DCI25 25 3 Up to 150
DCI50 50 3 150 - 250
• Produces a weakening in a slab which induces a crack where planned. • Durable PVC extrusion• Ideal for use with Danley® dowel cradles
Ideal for: Dowel cradles.
Crack Inducers (Connolly®)
ProductCode
Height (mm)
Length(m)
Suit Slab(mm)
KCI25 25 3 Up to 150
KCI45 45 3 150 - 250
• Ideal for joints in stenciled fi nishes• Tear off strip to the capping produces a clean true colour to the joint
Ideal for: Small pours such as footpaths, entertaining areas and small driveways.
Surface Grinding Cap (Connolly®)
ProductCode
Height(mm)
Width(mm)
Length(m)
Colour
KJSGC30B 24 5 3 Black
KJSGC30G 24 5 3 Grey
KJSGC30W 24 5 3 White
KJSGC30S 24 5 3 Sandstone
KJSGC30T 24 5 3 Terracotta
• Eliminates the need for sealants and saw cutting• Grinds easily • One size fi ts all Connolly® Key Joint profi les S317
S40
S31
Reduce your steelfi xingPrefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
National Product & Services Catalogue 2011/2012
63Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Key
Jo
int
accessoriesconcrete&building
Expansion Joint System (Connolly®)
ProductCode
Height(mm)
Length(m)
CEKJ3100 100 3
CEKJ3125 125 3
CEKJ3150 150 3
CEKJ3200 200 3
Key Joint – Expanda Joint Cut to length (Danley®)
ProductCode
Height (mm)
EXPKJ100C 100
EXPKJ125C 125
EXPKJ150C 150
EXPKJ200C 200
EXPKJ250C 250
• Includes expansion foam, dowels, dowel sleeves, pegs and wedges• Rigid steel profi le produces straighter joints • Allows load transfer• Designed for continuous pours and/or stop pours• Steel section compatible with all Connolly® UDS dowel sleeves• Load transfer is catered for
S47
Key Joint – Expanda Joint (Danley®)
ProductCode
Height(mm)
Length(m)
EXPKJ24100S 100 2.4
EXPKJ3100S 100 3
EXPKJ3125S 125 3
EXPKJ3150S 150 3
EXPKJ3200S 200 3
EXPKJ3250S 250 3
• Provides the same benefi ts as Keyjoint as well as expansion joint capability• One side faced with 5 mm closed cell foam• Expansion joint capability• Sizes to suit 100 – 250 mm thick slabs• Multiple cappings available• Drive-and-twist stake system• Knockouts allow use of 16 and 20 mm Dowelmaster® sleeves and square dowels• Provides excellent load transfer
Ideal for: Dowelmaster® and square dowels. S235
S47
S318
National Product & Services Catalogue 2011/2012
64Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Key
Jo
int
Key Joint (Danley®)
ProductCode
Height (mm)
Length(m)
KJD3100 100 3
KJD3125 125 3
KJD3150 150 3
KJD3200 200 3
KJD3250 250 3
KJD6100 100 6
KJD6125 125 6
KJD6150 150 6
KJD6200 200 6
accessoriesconcrete&building
• Multi-function galvanized steel stay in place formwork system for concrete slabs• Enables transfer of vertical loads across the joints between slabs• Allows lateral movement between the slabs, but limits vertical differential movement
between the slabs• Has a rigid top edge• Allows continuous concrete placement with preformed internal joints• Incorporates drive’n’twist stake system• Knock-outs provide for placement of square dowels• Ideal for light traffi c areas• Capping available for 3 mm recess, 10 mm recess, or permanent capping with Rip-A-Strip
S51
Key Joint (Connolly®)
ProductCode
Height(mm)
Length(m)
KJ100 100 6
KJ150 150 6
KJ200 200 6
KJ300 300 6
• Stakes included• Can screed off joint• Knockouts to accommodate a range of dowel sizes and shapes• Galvanized steel
S33
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
65Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Key
Jo
int
accessoriesconcrete&building
Key Joint – Accessories (Connolly®)
ProductCode
DescriptionLength(mm)
KJJ100 Joiner to Suit 100 mm key joint –
KJJ150 Joiner to Suit 150 mm key joint –
KJJ200 Joiner to Suit 200 mm key joint –
KJPEG Stake –
KJPEG100 Stake 100
KJPEG150 Stake 150
KJPEG200 Stake 200
KJWEDGE Wedge –
KJWP4 Wedges & Stakes 400
KJWP5 Wedges & Stakes 500
• Keeps joints straighter• Quick and accurate alignment in both horizontal and vertical directions• One size fi ts all Connolly® Key joint profi les• Does not interrupt the line of Connolly® capping strips
S34
Key Joint – Stakes (Danley®)
ProductCode
Diameter(mm)
Length(mm)
Suit Key Joint(mm)
No. Per Pack
KJDPEG3 10 350 100 - 150 8
KJDPEG4 10 450 200 8
KJDPEG5 10 550 250 8
S54
Key Joint – Capping (Danley®)
ProductCode
Description ColourWidth (mm)
Set Down (mm)
Length (m)
DRASB Permanent ( Rip-A-Strip) Black 13 2 25
DRASG Permanent ( Rip-A-Strip) Grey 13 2 25
DRASS Permanent ( Rip-A-Strip) Sandstone 13 2 25
DRAST Permanent ( Rip-A-Strip) Terracotta 13 2 25
KJDCAPR10 Removable - S tandard Black 10 3 25
KJDCAPR12 Removable - B lock Black 12 10 25
• Four decorative colours (black, grey, terracotta & sandstone)• Standard removable capping (10 x 3 mm)• Block capping (12 x 10 mm)
S53
National Product & Services Catalogue 2011/2012
66Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Key
Jo
int
Key Joint – Capping (Connolly®)
Key Joint Capping – Foam Filler Strips (Connolly®)
Key Joint Capping – Rebate Mould (Connolly®)
ProductCode
Description ColourWidth (mm)
Set Down (mm)
Length (m)
KJCAP Removable Grey 7.5 3 24
KJPCAP Permanent Black 9.5 3 24
KJCAPTBLK Permanent – T earoff Black 9 4 24
ProductCode
ColourWidth (mm)
Set Down (mm)
Length(m)
Suit Key Joint(mm)
KJF100 Black 12 8 6 100
KJF150 Black 12 8 6 150
KJF200 Black 12 8 6 200 - 3 00
ProductCode
ColourWidth(mm)
Set Down(mm)
Rebate Height(mm)
Length(m)
KJRM12 Yellow 12 14 12 3
accessoriesconcrete&building
• Permanent – for architectural fi nish• Removable – where sealant is to be applied• Prevents foreign particles entering the joint• UV treated PVC
• Compression strip for application to the top of Key joints• Closed cell polyethylene foam for maximum compression capabilities• Allows for greatest expansion near the slab surface where it is most needed
• A two-piece rigid plastic capping which forms a dimensionally correct rebate at joints• Designed for heavy traffi c• Forms a true square or rectangular rebate• Rigid PVC
S236
S36
S35
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
National Product & Services Catalogue 2011/2012
67Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Po
lystyre
ne
Po
ds
Polystyrene Pod
ProductCode
Height(mm)
Dimension(mm)
POD150 150 1100 x 1100
POD225 225 1100 x 1100
POD300 300 1100 x 1100
POD375 375 1100 x 1100
Polystyrene Pod Chairs – TRIPOD®
Compressible Void Former
Polystyrene Pod Spacer/Chair – FISHBONE®
ProductCode
Height(mm)
Length (mm)
No. PerPack
TP45 45 430 20
Product Code Height (mm) Dimensions (mm)
POD140C 140 1100 x 1100
POD225C 225 1100 x 1100
POD300C 300 1100 x 1100
ProductCode
Height(mm)
Length(mm)
No. PerPack
FB45 45 370 25
• Void former• Recyclable material• Light weight• Easy to handle
• Durable• Strong & Flexible• Dimensionally stable
• Compressible to alleviate heavy pressure on slabs
• Used in a slab design that offers fi xed pricing
• Fully tested and accredited • Light weight• Easy to handle• Recycled material
• Triangular design enhances ease of installation and construction speed• Aperture design allows continuous concrete aggregate fl ow• Guarantees two-wire minimum support of reinforcing mesh• Continuous length ensures load distribution minimising damage to polystyrene pods• Part of the ONESLAB® package
Ideal for: Slab on ground using polystyrene pods.
• Replaces footing steel support and internal single pod spacers.• Dual purpose steel location and pod separation• Locates internal and perimeter rib reinforcing connection• Facilitates consistent alignment of pods• Accommodates Trench Mesh and bars (N12 & N16)• Part of the ONESLAB® package
Ideal for: Slab on ground using polystyrene pods.
S217
S218
S332
S220
National Product & Services Catalogue 2011/2012
68Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Po
lystyre
ne
Po
ds
Polystyrene Pod Miscellaneous
Polystyrene Pod Spacers
Polystyrene Pod Chairs – PODRAIL
Product Code Description
EB300 Edge Spacer 300 mm
INSPACE Interlock Spacer
PODEDGE Edge Spacer
PODINT1 1 Way Internal Spacer
PODEXT2 2 Way External Spacer
PODEXT3 3 Way External Spacer
PODINT4 4 Way Internal Spacer
PODSP 4 Way Internal Spacer
Product Code Description
PODBAG Clear Clean Up Bags
PODRUB Rubbish Pickup Charge
ProductCode
Height(mm)
Length(mm)
No. PerPack
BPODR40 40 600 25
• Designed to spread the load of the top reinforcing mesh• Reduces bending of concreter or steel fi xer
Ideal for: Slab on ground using polystyrene pods.
• 2-way or 4-way spacers forming internal beam between polystyrene pods• Supports reinforcing bars• Provides concrete cover• Designed to ensure continuous concrete fl ow
Ideal for: Slab on ground using polystyrene pods.
• Clear rubbish bags to facilitate collection of pod scraps• Clear rubbish bags provides visibility to ensure non-contamination of pod scraps• Rubbish pick-up enhances ONESLAB® offer to recycle pod scraps
S237
S238
S219
Reduce Your Slab Costs• Fixed square metre price
• Reduces on-site labour requirements
• The Waffl e Slab package includes: Plastic sheeting, Polystyrene waffl e pods, Spacers, Reinforcing bars, ONEMESH®, Tie wires, Bar chairs and Tape
Call into your nearest branch or visit www.reinforcing.com
National Product & Services Catalogue 2011/2012
69Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
De
corative
Pro
du
cts
accessoriesconcrete&building
Sealer & Solvent
Product Code Description Size
CRSMODIFIER CRS Resurfacing Modifi er 20 L
STENADDSLIP Slip Resistant Additive 1 kg
STENPRIMER Sealer Prime & Sealer 20 L
STENSEALER Decorative Sealer 20 L
STENSOLVENT Solvent 20 L
TINTSEALER Base Sealer for STENTINT 18 L
• Resealing use and/or fi nish coat to new surfaces after application of initial ‘prime and seal’ coat• Designed for use with Decorative Concrete Resurfacing system • Aids curing• Promotes durability and serviceability• Specifi cally designed for the colour sealing of concrete
S73
Designer Concrete Coatings
Designer Concrete Coatings systems are the modern alternative to standard concrete paving fi nishes at a competitive cost over clay brick or tile alternatives. Resurface dull, existing plain concrete or a brand new pavement.
Benefi ts:• New Colour Range• Customer Service and Product Support• Classic and Traditional Paving Patterns• Economy and Value• Low Maintenance• Skid Resistant
Ideal for:• Patios• Driveways• Terraces• Service Courts • Carport Floors• Shop Floors• Pathways & Entranceways• Pool Surrounds • Kitchen & Family Room Floors
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
70Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
De
corative
Pro
du
cts
accessoriesconcrete&building
Decorative Stencil
Product Code Description Size
STENHEAD50 Stencil Header 100 m
STENHD050BLOCK Block Header 100 m
STENHD050BRIC Brick Header 100 m
STENHD050COBBLE Cobble Header 100 m
STENHD050CONVICT Convict Header 100 m
STENHD050EDGE Edge Brick Header 100 m
STENHD050LGTILE Large Tile Header 100 m
STEN050 Stencil 50 - 100 m2
STEN050ASHLAR Ashlar Slate 50 - 100 m2
STEN050BASKT Basket weave 50 - 100 m2
STEN050BLOCK Block 50 - 100 m2
STEN050BUSH Bushrock 50 - 100 m2
STEN050COBBLE Cobblestone 50 - 100 m2
STEN050CONVICT Convict Brick 50 - 100 m2
STEN050DIAMD Diamond Tile 50 - 100 m2
STEN050EURO European Fan 50 - 100 m 2
STEN050HERIT Heritage Weave 50 - 100 m 2
STEN050HERRING Herringbone 50 - 100 m 2
STEN050LGTILE Large Tile 50 - 100 m2
STEN050LONDON London Cobble 50 - 100 m 2
STEN050QUARRY Quarry Tile 50 - 100 m2
STEN050RAND Random Stone 50 - 100 m 2
STEN050REGAL Regal Tile 50 - 100 m2
STEN050RUN Running Bond 50 - 100 m2
STEN050RUST Rustic Brick 50 - 100 m2
STEN050SMLTILE Small Tile 50 - 100 m2
• Completed at the laying of wet concrete• Distinctive driveway surface colours & stencil pattern designs to complement the home, villa or unit• Stencil also available in 100 m2
Ideal for: Driveways, footpaths, patios, terraces, courtyards, pool surround, streetscapes, etc.
S287
Tools & Accessories
Product Code Description Dimension
STENBARTAPE Barrier Tape 100 m x 7 5 m m
STENBROOM10 Scrubbing B room wi th H andle 250 m m
STENBROOMSTN Broom Heads –STENCOVER230 Roller Cover 230 mm
STENCOVER270 Roller Cover 270 mm
STENCOVER460 Texture R oller C over 460 m m
STENDUCTTAPE Duct Tape 48 m m
STENEXTPOLE Roller E xtension Pole 1.8 m
STENFRAME230 Roller Frame 230 mm
STENFRAME270 Roller Frame 270 mm
STENFRAME460 Yoke Frame 460 mm
STENHANDLE Broom Handle –STENSCISSORS Scissors –
• Range of tools and accessories designed for use with Decorative ColourS284
National Product & Services Catalogue 2011/2012
71Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Multimix Colour
Decorative Spray
ProductCode
DescriptionMass(kg)
STENCOLOUR Multi Mix Colour 20
STENCOLAPRICOT Apricot 20
STENCOLBLUESTN Bluestone 20
STENCOLBRICRED Brick Red 20
STENCOLCHAR Charcoal 20
STENCOLCHOC Chocolate 20
STENCOLCLAY Clay 20
STENCOLCOFF Coffee Colour 20
STENCOLDARKRED Dark Red 20
STENCOLDKTERRA Dark Terracotta 20
STENCOLDUSTROS Dusty Rose 20
STENCOLFAWN Fawn Colour 20
STENCOLFREGRAY French Grey 20
STENCOLGUNMET Gunmetal 20
STENCOLLGHTERA Light Terracotta 20
STENCOLLITEGRY Light Grey 20
STENCOLLITESTON Lightstone 20
STENCOLMISGREEN Mist Green 20
STENCOLMUSTD Mustard 20
STENCOLSDBEIGE Sandy Beige 20
STENCOLSDSTONE Sand Stone 20
ProductCode
DescriptionMass(kg)
STENSPRAY Spray on 20
STENSPRAYAPRICOT Apricot 20
STENSPRAYBASE Base Coat 20
STENSPRAYBLUESTON Bluestone 20
STENSPRAYBRICRED Brick Red 20
STENSPRAYCHAR Charcoal 20
STENSPRAYCHOC Chocolate 20
STENSPRAYCLAY Clay 20
STENSPRAYCOBALT Cobalt Blue 20
STENSPRAYCOFF Coffee 20
STENSPRAYDARKRED Dark Red 20
STENSPRAYDKTERRA Dark Terracotta 20
STENSPRAYDUSTROS Dusty Rose 20
STENSPRAYFAWN Fawn 20
STENSPRAYFREGRAY French Gray 20
STENSPRAYGUNMET Gunmetal 20
STENSPRAYHGREEN Heritage Green 20
STENSPRAYLITEGRY Light Grey 20
STENSPRAYMISGREEN Mist Green 20
STENSPRAYMUSTD Mustard 20
STENSPRAYNEUTRAL Neutral 20
STENSPRAYOFFWHITE Off White 20
STENSPRAYSDBEIGE Sandy Beige 20
STENSPRAYSDSTONE Sand Stone 20
STENSPRAYWHITE White 20
accessoriesconcrete&building
• Multimix is used for stencil and stamped concrete. This product is the colour which is shaken over the wet concrete
• Lead time may apply
• Resurfacing/Spray on is mixed with water and modifi er and used to spray on over existing concrete
• Lead time may apply
S282
S283
De
corative
Pro
du
cts
National Product & Services Catalogue 2011/2012
72Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
De
corative
Pro
du
cts
Decorative Admixture
ProductCode
DescriptionMass(kg)
STENADD Admix Colour 1
STENADDDRIFT Driftwood 1
STENADDEBONY Ebony 1
STENADDFIJI Fiji Sands 1
STENADDFOREST Forest 1
STENADDGHOST Ghost Gum 1
STENADDGRANITE Granite 1
STENADDGRECIAN Grecian Terracotta 1
STENADDHAWKES Hawkesbury 1
STENADDHUSKY Husky 1
STENADDIRON Iron Bark 1
STENADDLATTE Latte 1
STENADDLAVA Lavastone 1
STENADDLAVENDER Lavender 1
STENADDMANLY Manly Sands 1
STENADDMORROCAN Moroccan 1
STENADDMOUNTAIN Mountain Mist 1
STENADDPAPER Paperbark 1
STENADDPEWTER Pewter 1
STENADDRIVER Riverbed 1
STENADDROSE Rose 1
STENADDSHELL Shell Haven 1
STENADDSMOKEY Smokey Rose 1
STENADDSNOW Snowfi eld 1
STENADDSPRING Spring 1
STENADDSTORM Storm Grey 1
STENADDTUSCANY Tuscany 1
STENADDWHEAT Wheat 1
accessoriesconcrete&building
S281
• Admixture colour oxide is combined with Spray On to achieve a variety of designer colours• Lead time may apply
Release Agent
ProductCode
DescriptionMass(kg)
RELAGT Release Agent 8
RELAGTBEIGE Beige 8
RELAGTBLACK Black 8
RELAGTDARKBROWN Dark Brown 8
RELAGTLITEBROWN Light Brown 8
RELAGTLITEGREY Light Grey 8
RELAGTSAND Sand 8
RELAGTTERRACOTTA Terracotta 8
RELAGTULURURED Uluru Red 8
• Release agent is the fi ne powder that is used when applying stamped concrete systems. Gives a two-tone effect to stamping to help achieve the look of stone, rock or slate etc.
• Lead time may applyS286
National Product & Services Catalogue 2011/2012
73Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Drain
age
& V
en
tilation
accessoriesconcrete&building
Ventilation – Weepa
Possible Product code
DescriptionSize H x W x D
(mm)No. Per Pack
WEEPASTD Standard Weepa 75 x 10 x 105 25
WEEPAHPB High Perf. Bush Fire Weepa 75 x 10 x 105 25
WEEPALOUV Louvered Weepa 75 x 10 x 105 25
WEEPA70 70mm Weepa 75 x 10 x 70 25
WEEPA70HPB 70mm Bushfi re Weepa 75 x 10 x 70 25
WEEPA90EXT 90mm Extension75 x 10 x 70
+ 90 mm extension25
WEEPAPS Pest Stoppa 20
Drainage – Unifl ow® (Mastermesh® Industries)
ProductCode
Channel DimensionW x D x T (mm)
Grate DimensionW x T (mm)
Length(m)
UF24 130 x 90 x 2 145 x 5 2.4
UF30 130 x 90 x 2 145 x 5 3
UF36 130 x 90 x 2 145 x 5 3.6
• Large capacity drain• Hinged cleaning and inspection fl ap• Distinctive slotted grating panel – reduces litter & leaf intake• Fully hot-dipped galvanized to AS/NZS 4680 : 2006. Hot-dip galvanized (zinc) coatings on
fabricated ferrous articles• No formwork necessary• Four Easy-Fit accessories available
• Simplifi es and improves ventilation and drainage in cavity construction• Prevents dampness, fungus and mildew• Prevents entry of embers and vermin into the wall cavity
Ideal for: Brick work and rendered panel
S214
S222
Drainage – Unifl ow® Accessories (Mastermesh® Industries)
Product Code
Description
UFSJ Slip Joint
UFPF Pipe Flange
UFBE Blank End
UFBO Bottom Outlet
S215
National Product & Services Catalogue 2011/2012
74Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Lin
tels
accessoriesconcrete&building
LINTELSPremium quality GALINTELS® are a range of light-weight, easy to install, load bearing, hot-dipped galvanized ribbed steel lintel bars for the building and construction industry. They are specifi cally designed and fully tested to support brickwork over openings such as windows and doors.
Your design engineer should determine the type, size and length of the GALINTEL® to be used.
An extensive range of profi les and sizes are available to suit all types of applications including:
• GALINTEL® Solid Base Angle• GALINTEL® Multi-Rib T-Bar• GALINTEL® Rendabar• GALINTEL® Traditional Flat Angles and T-Bars• GALINTEL® Cavi-T-Bar.
Note: All Lintels hot-dip galvanized to AS/NZS 4680 : 2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles and also achieve R3 durability Rating
R3 Durability Rating – 25-year WarrantyGenuine Galintel® hot-dip galvanized steel lintels are 40% lighter than solid lintels with a high strength to weight ratio.
The ribbed Galintel® profi le creates a superior bond with the mortar. The brickwork, mortar and lintel work together to form a composite beam with exceptional strength and load carrying capacity.
You won’t have to worry about corroded lintels and cracked brickwork thanks to the generous galvanizing layer – including the ends of the product where corrosion often begins.
All Galintel® bars comply with the following standards:
> Hot-dip galvanized to AS/NZS 4680 : 2006
> Up to R3 durability ratings in accordance with AS/NZS 2699.3 : 2001 - Built in components for masonry construction.
> Loads in accordance with AS/NZS 1170.1 : 2002 - Structural design actions set.
Compliance with codes and standards is guaranteed – Galintel performance backed by research conducted by the University of NSW, Sydney University and CSIRO.
Durability & corrosion – resistance (R3 rating)All Galintel® products are hot-dip galvanized with a zinc coating of 600 g/m2 which complies with an R3 durability rating. Durability is a function of the thickness of the zinc coating (black steel is classifi ed as RO and stainless steel as R5).
Galintels® can achieve an R4 durability rating when coated with a two-part epoxy coating (contact Galintel® for specifi cation sheet).
Product WarrantyAll Galintel® products are guaranteed against defects in materials and workmanship.
Galintel Pty Ltd further warrants that its products will suffer no loss of function nor will they adversely affect the masonry within 25 years from the date of installation. For full warranty conditions and registration details visit www.galintel.com.au.
Quick Selection Guide1. Determine the Loading Category by referring to the
diagrams below.
2. Determine the span of the opening, including end bearings, and use the Clear Span Length table to fi nd the appropriate Galintel® profi le.
3. Determine the load to be applied to the Galintel® and refer to the Safe Load tables over page to fi nd the correct profi le size and stock length.
Example: Loading Category B (cavity wall construction), 1800 mm span with UDL of 1400 kg/m, from the safe load tables over page, this requires a Galintel® Solid Base Angle with 150 x 100 mm profi le and stock length of 2100 mm.
Construction CategoryCategory A – Non-load bearing brick veneer with separate structural timber frame.
Category B – Cavity wall equally supported on both skins. Supported roof span < 8m.
Category C – Lightweight sheet roof and ceiling supported on single skin. Supported roof span < 8m.
Category D – Lightweight timber truss, tiled roof and sheet ceiling supported on single skin. Supported roof span < 8m.
Category E – Load-bearing internal brickwork under
upper storeys. Supported fl oor span < 8m.
A B C D E
These diagrams represent general domestic and light commercial construction only using conventional framing materials and standard building practices. All load-bearing walls must have at least three courses of bricks over the opening.
The wall above the opening should not be subjected to major loads other than those from normal roof, ceiling and fl oors. Avoid point loads above the opening such as hot water tanks and roof storage areas.
Category E loadings that do not comply with the above conditions should be referred to a structural engineer.
National Product & Services Catalogue 2011/2012
75Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
Lin
tels
accessoriesconcrete&building
How do I decide which Galintel® is best for my project?
Your design engineer should determine the type, size and length of Galintel® for the brickwork openings by consulting the relevant technical data and safe load tables.
Why are Galintel® products hot-dip galvanized?
Hot-dip galvanizing (HDG) is the most economical form of providing corrosion protection for steel to prevent rust. Brickwork cracking caused by rust displacement is virtually eliminated by the corrosion protection of HDG. HDG also offers excellent impact and scratch resistance to cope with the rigours of transport and handling on a building site.
What if I require a non-standard length Galintel®?
You may use a longer length of Galintel®, which will result in a longer end-bearing length. Where the end-bearing length is restricted, you can cut the Galintel® to the required length. The cut end must be cleaned, primed and painted with a zinc-rich paint (minimum 95% zinc content). However, product warranty would not apply.
Do I need to prop Galintels®?
Yes. During installation props must be positioned and not removed until the mortar is cured. This allows the composite beam to form correctly and ensures level alignment of the brickwork. Props should be no further apart than 1.2 m.
How many courses of bricks are needed above a steel lintel?
The Building Code of Australia requires that not less than three courses of bricks must be used above a steel lintel to form an arching effect.
Can I weld to a Galintel®?
We don’t recommend that you perform welding on Galintel® products as welding destroys the protective zinc coating. If welding is required, consult your design engineer.
Which Galintel® product is best suited for a rendered fi nish application?
Galintel® Rendabar® is ideal because it is specifi cally designed and developed for rendered applications.
Is there a Galintel® available for fi re rated structures?
Yes. Galintel Rendabar® has a fi re rating of up to two hours depending on the application. To achieve the designed fi re rating the Galintel Rendabar® must be cement-rendered after installation. The rendering must also meet relevant building codes and standards.
Are Galintels® suitable for buildings near the coast or in severe environments?
Galintels® are suitable for use in these areas, but additional coatings may be required. AS2312 specifi es the types of additional protective coating needed to maintain the required service life in highly corrosive environments.
What guarantees do Galintels® offer?
Galintel Pty Ltd guarantees that all Galintel® products are free from defects in material and workmanship. Galintels® have been appraised by the CSIRO, they comply with the requirements of the BCA and are designed and tested to meet the relevant sections of AS3700 : 2001 – Masonry structures. Galintels® meet the requirements of the R3 durability classifi cation as defi ned in AS/NZS2699.3 : 2002. Galintel® products have been recognised by the Australian Design Council with an Australian Design Award.
How do I identify a genuine Galintel® product?
Galintels® can be identifi ed by their ribbed profi le. All products in the Galintel® range are also clearly labelled to show the name, size, length, unit weight, month/year of manufacture and durability classifi cation.
How do I ensure full composite action is achieved?
By ensuring that mortar is present at all contact surfaces between bricks and lintel and that the lintel is correctly propped during installation.
Lintels – Frequently Asked Questions
Disclaimer: Information contained in this brochure does not constitute an offer and is supplied in good faith to aid the user in the correct selection of our products. Every care has been taken to ensure that the information is correct; however, we cannot guarantee its accuracy or completeness and we assume no responsibility for errors or omissions or for any consequences of reliance on this publication. Galintel Pty Ltd is committed to continual improvements in their products and they reserve the right to change specifi cations, details and designs without notice. All dimensions and masses in this brochure are nominal.
National Product & Services Catalogue 2011/2012
76Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
An
gles &
Flats
Lintel – Traditional Flat 75 x 10 mm (Galintel®)
ProductCode
Length(m)
Recommended Span(m)
A1FG08 0.8 0.6
A1FG09 0.9 0.7
A1FG10 1.0 0.8
A1FG11 1.1 0.9
A1FG12 1.2 1.0
• Hot rolled merchant bar lintel• 300 MPa grade steel• Fully hot-dip galvanized fi nish to achieve R3 durability rating
S99
Lintel – Flat Bar 85 x 7 mm (Galintel®)
accessoriesconcrete&building
ANGLES & FLATSUnless otherwise indicated, load values in the tables are limited by stress. For example, for a span of 2100 mm, a 150 x 100 x 2400 Galintel® may have a load of 949 kg/m applied safely with a maximum long-term defl ection of 1/600 span or 3.5 mm (2100/600 = 3.5).
Note: All tables are intended as a guide only. Qualifi ed expert advice should be sought in deciding the suitability of any structural product for a construction application. UDL = Uniform Distributed Load
Safe Load Tables
ProductCode
Length(m)
Clear Span Length (m)
Category A
Category B
Category C
Category D
Category E
TF08 0.8 0.6
TF09 0.9 0.7
TF10 1 0.8
TF11 1.1 0.9
TF12 1.2 1
S27
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
77Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
An
gles &
Flats
ProductCode
Length(m)
Clear Span Length (m)
Category A
Category B
Category C
Category D
Category E
GRL218 1.8 1.5
GRL220 2 1.7
GRL221 2.1 1.8
GRL224 2.4 2.1
GRL227 2.7 2.4
GRL230 3 2.7
GRL233 3.3 3
GRL236 3.6 3.3
GRL240 4 3.7
Lintel – Angle Bar 100 x 100 x 6 mm (Galintel®)
S24
Lintel – Angle Bar 150 x 100 x 6 mm (Galintel®)
S239
ProductCode
Length (m)
Clear Span Length (m)
Category A
Category B
Category C
Category D
Category E
GRL109 0.9 0.6
GRL112 1.2 1
GRL114 1.4 1.1
GRL115 1.5 1.2
GRL117 1.7 1.4
GRL118 1.8 1.5
GRL120 2 1.7
GRL121 2.1 1.8
GRL124 2.4 2.1
GRL127 2.7 2.4
Safe Load Tables
Call into your nearest branch or visit www.reinforcing.com for a copy today!oday!
NEW REOWORKS CD/DVD5!The reinforcing essential that has everything you need to know about ‘REO’ has been revised and is Available Now!
• New Case Studies and Videos• Design Guides. Product Brochures and more…
National Product & Services Catalogue 2011/2012
78Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Traditio
nal A
ng
les
accessoriesconcrete&building
Lintel – Traditional Angle 100 x 75 x 10 mm (Galintel®)
S98
TRADITIONAL ANGLESNotes on safe load tables for Traditional Angles
Loads given are total (allowable) loads including lintel and brickwork. These load tables assume that bricks and props fully restrain the lintel against twisting and local buckling of compression leg. Non-composite action was used in the calculations. UDL for each Construction Category was based
on 8 m of supported span of fl oor or roof (of which 4 m is taken by the section being considered). Six courses of bricks were considered for each category. UDLs for each Loading Category in kg/m were: A – 124, B – 374, C – 391, D – 605, E – 2202, F – 1020.
Note: A minimum of three courses of bricks must be laid above the lintel.
Safe Load Tables
Lintel – Traditional Angle 150 x 90 x 10 mm (Galintel®)
S245
ProductCode
Length(m)
Clear Span Length (m)
Category A
Category B
Category C
Category D
Category E
A2LG12 1.2 0.9
A2LG15 1.5 1.2
A2LG18 1.8 1.5
A2LG21 2.1 1.8
A2LG24 2.4 2.1
A2LG27 2.7 2.4
A2LG30 3.0 2.7
A2LG60 6.0 5.7
ProductCode
Length(m)
Clear Span Length (m)
Category A
Category B
Category C
Category D
Category E
A3LG18 1.8 1.5
A3LG21 2.1 1.8
A3LG24 2.4 2.1
A3LG27 2.7 2.4
A3LG30 3.0 2.7
A3LG33 3.3 3.0
A3LG36 3.6 3.3
A3LG40 4.0 3.7
A3LG45 4.5 4.2
A3LG50 5.0 4.7
A3LG55 5.5 5.2
A3LG60 6.0 5.7
FREE REO Bar Gauge!• Confi rm key REBAR sizes for N10, N12, N16, N20,
N24, N28 and N32.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
79Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
RE
ND
AB
AR
®
Lintel – Rendabar® 100 x 100 x 8 mm (Galintel®)
RENDABAR®
Galintel Rendabar® is a total load bearing bar specifi cally designed to facilitate cement rendering. The bond between mortar, brickwork and lintel forms a composite beam of superior strength and structural integrity. The platform leg provides a wide base of support for brickwork and a generous keying area for cement rendering.
Light weight rigidity
Galintel Rendabars® are considerably lighter than other forms of lintels contributing to ease of handling and faster construction and less potential damage to green masonry. Mortar bonding with the multi-ribbed section locks the Rendabar® fi rmly to the masonry providing superior lateral bracing and rigidity.
Safe Load Tables
Lintel – Rendabar® 150 x 100 x 8 mm (Galintel®)
ProductCode
Length(m)
Recommended Span (m)
RDBL21 2.1 1.8
RDBL24 2.4 2.1
RDBL27 2.7 2.4
RDBL30 3 2.7
RDBL33 3.3 3
RDBL36 3.6 3.3
RDBL40 4 3.7
ProductCode
Length(m)
Recommended Span (m)
RDB09 0.9 0.6
RDB12 1.2 0.9
RDB15 1.5 1.2
RDB18 1.8 1.5
RDB21 2.1 1.8
RDB24 2.4 2.1
• Total load bearing lintel designed to facilitate cement rendering • Lighter than other forms of lintels used with rendered fi nish • Ribbed profi le forms a composite beam of superior strength• Fully hot-dip galvanized fi nish to achieve R3 durability rating• Complies with Australian Building Code requirements
S26
S240
Ask us about larger size mesh to suit your project
Talk to OneSteel Reinforcing early in your project for producing larger size and customised mesh sheets
• Reduces lapping, cutting and waste• Suited to residential and commercial projects• Cut & Bent service and delivery to site available
made to size
National Product & Services Catalogue 2011/2012
80Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Lintel – Multi-Rib T-Bar 200 x 200 x 7 mm (Galintel®)
Product Code
Length(m)
Recommended Span(m)
TB7 Size to Order As Applicable
TB709 0.9 0.6
TB712 1.2 0.9
TB715 1.5 1.2
TB718 1.8 1.5
TB721 2.1 1.8
TB724 2.4 2.1
TB727 2.7 2.4
TB730 3 2.7
TB733 3.3 3
• Total load bearing lintel designed to support 230 mm brickwork over openings• High strength-to-weight ratio• Relies on composite action with mortar and brickwork• Up to 40% lighter than traditional T-Bars• Fully hot-dipped galvanized fi nish to achieve R3 durability rating• Complies with Australian Building Code requirements
S241
MULTI-RIB T-BARSGalintel® Multi-Rib T-Bars are cost-effective lintels that provide structural rigidity, high strength-to-weight ratio and resistance to corrosion.
The multi-ribbed profi le forms a superior bond with the mortar. This bond between mortar, brickwork and lintel creates a composite beam of superior strength and structural integrity. The Galintel® Multi-Rib T-Bar is a total load bearing lintel designed to support 230 mm brickwork over a clear opening.
Safe Load Tables
Lintel – Multi-Rib T-Bar 200 x 200 x 9 mm (Galintel®)
ProductCode
Length(m)
Recommended Span(m)
TB9 Size to Order As Applicable
TB936 3.6 3.3
TB939 3.9 3.6
TB942 4.2 3.9
TB945 4.5 4.2
TB948 4.8 4.5
TB951 5.1 4.8
TB954 5.4 5.1
TB957 5.7 5.4
TB960 6 5.7
TB963 6.3 6
S242
Mu
lti-Rib
T-Bars
National Product & Services Catalogue 2011/2012
81Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Traditio
nal T-B
ars
Lintel – Traditional T-Bar 200 x 200 x 10 mm (Galintel®)
ProductCode
Length(m)
Recommended Span(m)
TTB1020 Made to Order As Applicable
TTB102027 2.7 2.4
TTB102033 3.3 3
TTB102052 5.2 4.9
TTB102060 6 5.7
TTB102063 6.3 6
S339
TRADITIONAL T-BARSTraditional T-Bar features
• Designed and manufactured in Australia
• Comply with Australian Standards and Building Code requirements
• Manufactured under process-based quality control requirements
• Product certifi ed by Unisearch Limited
• Fully machine welded
• 300 MPa grade steel
• All surfaces, including ends, fully hot-dip galvanized with 600 g/m2 zinc coating
• R3 durability rating as standard fi nish
Safe Load Tables
Lintel – Traditional T-Bar 250 x 200 x 10 mm (Galintel®)
ProductCode
Length(m)
Recommended Span(m)
TTB1025 Made to Order As Applicable
TTB102554 5.4 5.1
TTB102560 6 5.7
• Fully machine welded structural lintel beam• 300 MPa grade steel• Does not rely on composite action• Fully hot-dip galvanized fi nish to achieve R3 durability rating
S243
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
National Product & Services Catalogue 2011/2012
82Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
CA
VI-T-B
ars™
Lintel – Cavi-T-Bar™ Vertical Leg 240 x 9.5 mm Platform Leg 250 x 8 mm (Galintel®)
Product Code
Height(m)
Recommended Span (m)
CAVTL Made to Order As Applicable
CAVTL42 4.2 3.9
CAVTL45 4.5 4.2
CAVTL48 4.8 4.5
CAVTL52 5.2 4.9
CAVTL54 5.4 5.1
CAVTL56 5.6 5.3
CAVTL60 6.0 5.7
S330
CAVI-T-BAR™The Galintel Cavi-T-Bar™ lintel is the ideal solution for cavity walls, either double brick, or brick veneer with timber trusses.
The Cavi-T-Bar™ was developed in response to demand from builders for an economical substitute for built-up steel sections such as parallel fl ange channel and plate.
Similar to a T-Bar but with a special top fl ange incorporated into the upright section, the Galintel Cavi-T-Bar™ provides an off-the-shelf solution for cavity walls, hot-dip galvanized and fully engineered.
Cavi-T-Bar™ features
• Up to 25% lighter than built-up steel sections
• Convenient, economical substitute for built-up steel sections such as parallel fl ange channel and plate
• Fully hot-dip galvanized (600 g/m2)
• Available in standard lengths
• Fully engineered and university tested
• Full product warranty
Safe Load Tables
• Convenient, economical substitute for built-up steel sections such as parallel fl ange channel & plate
• Up to 20% lighter than built-up steel sections of equivalent load capacity• Fully hot dip galvanized fi nish to achieve R3 durability rating• Fully Engineered• Full Product Warranty
Lintel – Cavi-T-Bar™ Vertical Leg 180 x 8 mm Platform Leg 250 x 8 mm (Galintel®)
ProductCode
Length(m)
Recommended Span (m)
CAVT Made to Order As Applicable
CAVT27 2.7 2.4
CAVT30 3.0 2.7
CAVT33 3.3 3.0
CAVT36 3.6 3.3
S329
National Product & Services Catalogue 2011/2012
83Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
50
0P
LU
S® R
EID
BA
R™
Threaded REIDBAR™ System – Frequently Asked Questions
How far into the Coupler must the bar be threaded?Tests show that to achieve the ultimate strength of the connection the thread engagement must be at least 80% of the maximum thread depth available in the fi tting. Correct bar insertion is critical to the performance of the REIDBAR™ system and it is recommended that good practice requires the user to mark the bar at half coupler length back from the inserted end so that a visual check is available.
Is tightening torque critical in the performance of REIDBAR™ components?Provided the bar is screwed tightly against the centre stop, or fully through the component, whichever is appropriate, the full breaking strength of the bar will be developed. Reid™ recommends using a wrench with a minimum length of 300 mm to ensure the bar is fully engaged.
What is the best way of cutting REIDBAR™ before joining?It is preferable to cut REIDBAR™ with an abrasive cut-off wheel or cut-off saw as sheared or cropped ends usually present problems. Poorly maintained equipment will leave a misshaped core diameter and excessive burr on the bar end making more diffi cult to thread on nuts and couplers.
What end treatment is required before coupling?If diffi culty is encountered because of burring or distortion of the end during cutting or shearing then a light dressing with an angle grinder to remove the damage is all that is required.
Can you bend and rebend REIDBAR™?Rebending reinforcing steel is not recommended because steel strain hardens when it is bent and loses some of its ductility, an effect that is usually increased when the steel is rebent. It is important that reinforcing steel used in concrete structures remains ductile, especially when the structure could be subjected to seismic loads.
Can I weld cast REIDBAR™ fi ttings?Although cast SG Iron fi ttings can be welded using specialised techniques it is not a recommended practice because it will degrade the strength and ductility of the fi tting and it will no longer meet the performance characteristics stated in this manual. Hot forged nuts can be welded and nuts manufactured from free machining steels can also be welded but caution needs to be exercised if load capacity is critical. If you have further questions regarding welding contact Reid™ for clarifi cation.
How do I connect one precast concrete element to another using REIDBAR™?The best way to join to concrete elements is by casting a REIDBAR™ Grout Sleeve into the top of the lower element and a REIDBAR™ Coupler into the bottom of the upper element. This eliminates the need for any starter bars protruding from the precast elements that are liable to damage and bending. Immediately prior to fi nal placing a starter bar of the correct length is screwed into the coupler and non-shrink grout is poured into the grout sleeve cup. The two elements are then brought together into the fi nal position, levelled and propped.
Note: This pre-grout method avoids the necessity for casting in grout tubes and the need for a separate grouting operation. TO EFFECTIVELY ANCHOR A GROUT SLEEVE IT REQUIRES A LAP LENGTH OF BAR PROTRUDING FROM AND SCREWED INTO THE THREADED END.
What are the minimum cover requirements for REIDBAR™ and components?REIDBAR™: Code requirements for Reinforcing must be observed. Refer to AS 3600 Concrete structures. Components: Because the two main factors to be considered are Fire and Corrosion suffi cient protection for the components should be specifi ed by the designer according to the requirements of the application, taking into consideration the relevant codes and the following notes.
Fire: The temperature of the steel reinforcing is affected by the cover of concrete over the full extent of the embedded bar. The temperature is averaged over the steel by conduction along its length which acts to quickly dissipate any localised temperature variations. A minor reduction in the cover in a very localised area (e.g. at a coupler) would therefore not lead to any signifi cant increase in steel temperature and no increased reduction in strength.Corrosion: (1) Those metal REIDBAR™ components not made of ductile iron require the same cover as the bar itself unless galvanized or otherwise protected.(2) REIDBAR™ components in sizes larger than RB12 are generally manufactured from specially alloyed high strength ductile iron. Ductile iron corrodes at about 30% of the rate of reinforcing steels and the products of the corrosion are not expansive. Therefore it does not lead to the spalling and fl aking problems commonly associated with the corrosion of steels in concrete. Because of this good corrosion resistance cover for Ductile Iron components can be reduced, although it is suggested that cover be maintained to at least 50% of code requirements for reinforcing steel. The exception to the better corrosion resistance of ductile iron is sea water and in that case it is preferable to use the same cover limitation as the bar.
Can I use the REIDBAR™ system at temperatures below freezing?All low temperature applications should be considered carefully, especially where impact loads are also present, even though AS/NZS 4671 : 2001 Steel reinforcing materials, has no impact test requirement.
REIDBAR
National Product & Services Catalogue 2011/2012
84Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
50
0P
LU
S® R
EID
BA
R™
Threaded REIDBAR™ System
Features and Benefi ts• A continuously threaded, hot rolled, Grade 500 reinforcing bar that can be cut
at any point along its length, then simply joined end to end by a coupler. This unique feature enables an entirely new approach to reinforcement placing and fi xing
• Improved structural integrity. Ductility can be guaranteed at all column/beam/slab joints
• Ultimate strength development is possible with short embedment depths
• Suitable for very thin concrete sections, such as wall panels
• Conforms to recognised Industry Standards
• Provides simple solutions for construction problems, reducing both labour and material costs
• Increases productivity on site
• Full range of threaded fi ttings for joining, anchoring and terminating
• Simplifi es the detailing and fi xing of REBAR
• Economical to splice at any point along the bar without specialised splicing equipment
• Reduces bar congestion problems; laps, cogs, eliminated in heavily reinforced areas
• Eliminates cast-in starter bars to simplify transport and handling
• Easy to provide anchorage for starter bars for in-situ concrete pours
• Eliminates the need to drill holes in formwork and shutters for starter bars
• Offcuts have many other uses and the ability to join shorter lengths reduces wastage
REIDBAR™ satisfi es the requirements of the standard for AS/NZS 4671 : 2001 Steel reinforcing materials. The bars are hot rolled with the deformations forming a continuous right hand thread.
REIDBAR™ is part of a proprietary system using a range of fi ttings to simplify reinforcement detailing. With exception of formwork fi ttings and some RBRACE fi ttings all construction system fi ttings develop the breaking strength of REIDBAR™.
* – Miniumum
REIDBAR
ProductCode
Bar Diameter
(mm)Grade
Nom Thread Pitch (mm)
Characteristic Values
Mass (kg/m)
Nom Area
(mm2)
Hole Dia. to
Pass Bar* (mm)
Yield Stress* (MPa)
Yield Strength*
(kN)
Ultimate Strength*
(kN)
Shear* (.62 min
ult)
RB12 12 500N 8 500 56.5 61.0 37.8 0.91 113 15
RBA16 16 500N 9 500 100.6 108.5 67.3 1.62 201 20
RBA20 20 500N 10 500 157.0 169.6 105.2 2.53 314 24
RB25 25 500N 12.9 500 245.5 265.1 164.4 3.95 491 29
RB32 32 500N 16.4 500 402.0 434.2 269.2 6.47 804 38
Specifi cations & Sizes
National Product & Services Catalogue 2011/2012
85Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
ProductCode
Grade(MPa)
Metric ThreadStressed Area
(mm2)f
sy
(kN)
Limit State Strength ø f
sy
(kN)
N12 500 M10 58 21.8 17.4
RB12 500 RB12 113.1 56.5 45.2
N16 500 M12 84.3 31.6 25.3
RBA16 500 RB16 201 100.5 80.4
N20 500 M16 157 58.9 47.1
RBA20 500 RB20 314 157.1 125.7
N24 500 M20 245 91.9 73.5
RB25 500 RB25 491 245.5 196.4
Threaded REIDBAR™ Starter Bar Systems
REIDBAR
REIDBAR™ starter bar systems have been developed to provide full strength and positive connections between precast concrete panels, fl oor slabs and in situ suspended fl oors.
The system comprises REIDBAR™ Threaded Inserts, REIDBAR™ Starter Bars, specially designed Placement Chairs, Nailing Plates and Antenna Caps.
The versatility of the system allows the contractor to set up the REIDBAR™ Inserts prior to the panel being poured or to ‘puddle them in’ before the panel is fl oated off.
Whatever the method used, REIDBAR™ starter bar systems offer strength, stability, price effectiveness and ease of operation that you just don’t get with standard N Bar starter bars.
Features and Benefi ts• Available in RB12, RBA16 and RBA20 diameters – off the shelf
• Thread diameter is true to size – not a N20 bar with a thread turned down to 16 mm
• Coarse thread on the bar resists damage and minimises foreign materials blocking the threads of the cast-in REIDBAR™ insert
• Coarse thread results in speed of application when screwing the Insert and starter together
• System components are purpose designed and offer speed of set up and installation either in the precast yard or on site
• Non-standard lengths are easily catered for as starter bars are cut from standard 6 or 12 m lengths of threaded reinforcing bar.
Comparison Table – REIDBAR™ Starter Bars vs N-bar Starter Bars
fsy
= the characteristic yeild strength of steel reinforcement (referred to as Re in AS/NZS 4671 : 2001)
50
0P
LU
S® R
EID
BA
R™
National Product & Services Catalogue 2011/2012
86Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Threaded REIDBAR™ – Soil and Rock Anchoring
REIDBAR
Features and Benefi ts• REIDBAR™ has closely defi ned mechanical properties which provide consistent
performance under long-term anchor loading
• Unlike strand tendons the solid anchors have no constructional losses
• Supplied in the hot rolled condition which is effectively stress-free
• The high ductility and smooth, relatively fl at rate of strain hardening ensures a high margin of safety against tensile/shear overload in the case of transverse movements in the rock or soil
• Resists dynamic loads (e.g. traffi c wheel loads)
• Preloading to the full working load ensures that the load transmitted to the anchorage medium (rock or soil) is constant i.e. live loads are not transmitted to the anchorage medium
• Rugged thread is resistant to damage
• May be tensioned, released and re-tensioned with ease
• Simplicity in applying the prestress with jacks, torque wrenches or air operated tools
• Recoverable anchors may be removed to simplify later excavations
• The rigidity of the anchors makes them easy to install especially in overhead applications
• High shear bond as deformations are designed for shear interlock with concrete or resin
• Transmits the anchor forces effi ciently to the grout body without additional fi ttings
• Standard stock lengths may be stored and cut to suit the application
• Offcut bars may be used for all standard concrete reinforcement applications in the construction site whilst small pieces are ideal for formwork, starter bars or hangers in underground works
• Can be cut and spliced at any point along its length
Specifi cations & Working LoadsMechanical properties and working loads for grade 500 REIDBAR™
ProductCode
Bar Diameter
(mm)Grade
Char Yield Stress (MPa)
Char Min Strength
(kN)
Char Min Ult Strength
(kN)
Char Min Shear .62 min Ult
(kN)
Max Tensile Working Load
(kN)
RB12 12 500N 500 56.5 61.0 37.8 39
RBA16 16 500N 500 100.6 108.5 67.3 70
RBA20 20 500N 500 157.0 169.6 105.2 109
RB25 25 500N 500 245.5 265.1 164.4 171
RB25 32 500N 500 402.0 434.2 269.2 281
50
0P
LU
S® R
EID
BA
R™
FREE REO Bar Gauge!• Confi rm key REBAR sizes for N10, N12, N16, N20,
N24, N28 and N32.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
87Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
REIDBAR
REIDBAR™ – Stock Black
ProductCode
Diameter (mm)
Length(m)
RB12S6 12 6
RBA16S6 16 6
RBA20S6 20 6
RB25S6 25 6
RB32S6 32 6
RBA16S12 16 12
RBA20S12 20 12
RB25S12 25 12
RB32S12 32 12
REIDBAR™ – Stock Galvanized
ProductCode
Diameter (mm)
Length(mm)
RB12SG 12 6
RB25SG 25 6
RB32SG 32 6
RBA16SG 16 6
RBA20SG 20 6
Note: OneSteel Reinforcing does not recommend REIDBAR™ for formwork use.
Note: OneSteel Reinforcing does not recommend REIDBAR™ for formwork use.
500PLUS® REIDBAR™This unique system consists of continuously threaded 500N Grade reinforcing bar and a complementary range of fi ttings and accessories which have been proven to simplify the detailing and fi xing of reinforcing bar. REIDBAR™ reinforcing bars can be cut and joined together at any point without the loss of strength associated with tradtional bar systems, or the material wastage arising from lapped connections.
Note: Lead time required for galvanized bars and fi ttings.
REIDBAR™ – Processed Black
ProductCode
Diameter(mm)
RB12 12
RBA16 16
RBA20 20
RB25 25
RB32 32
Note: OneSteel Reinforcing does not recommend REIDBAR™ for formwork use.
Ideal for:• Wall to Beam• Wall to Slab• Beams• Columns
• Slab to Slab• Core Wall/Shear Wall Joints• Beam to Slab
QAB
QAG
QPB
50
0P
LU
S® R
EID
BA
R™
National Product & Services Catalogue 2011/2012
88Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
REIDBAR™ – Processed Galvanized
ProductCode
Diameter(mm)
RB12G 12
RBA16G 16
RBA20G 20
RB25G 25
RB32G 32
Note: OneSteel Reinforcing does not recommend REIDBAR™ for formwork use.QPG
REIDBAR
REIDBAR™ – Couplers Black
ProductCode
Suit REIDBAR™
(mm)
Length(mm)
Thread Depth(mm)
Body OD(mm)
Hex OD(mm)
RB12C 12 90 43 22 29
RBA16C 16 102 47 30 34
RBA20C 20 116 55 33 43
RB25C 25 180 87 43 52
RB32C 32 210 102 55 66
S162
REIDBAR™ – Couplers Galvanized
ProductCode
Suit RE-IDBAR™
(mm)
Length(mm)
Thread Depth(mm)
Body OD(mm)
Hex OD(mm)
RB12CG 12 90 43 22 29
RBA16CG 16 102 47 30 34
RBA20CG 20 116 55 33 43
RB25CG 25 180 87 43 52
RB32CG 32 210 102 55 66
S163
• Internally threaded couplers for joining REIDBAR™ lengths• Ideally suited to provide continuity of reinforcing especially for heavily congested areas • Eliminates the need for lapping and protruding bars whilst ensuring structural integrity
50
0P
LU
S® R
EID
BA
R™
Giving our customers a voice!We’re always looking for feedback on how we can improve our products and services to you. That’s why we’ve developed REO RESPONSE. We value your opinions that go into helping us become a “Better and Different” reinforcing company.
Visit www.reinforcing.com or email [email protected]
National Product & Services Catalogue 2011/2012
89Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
REIDBAR™ – Nut Galvanized
S172
accessoriesconcrete&building
REIDBAR™ – Nut Black
ProductCode
Suit REIDBAR™ (mm)
Length(mm)
Hex A/F(mm)
Hex A/C(mm)
RB12N 12 40 25 25
RBA16N 16 45 30 34
RBA20N 20 45 36 42
RB25N 25 65 46 53
RB32N 32 82 55 63.5
ProductCode
Suit REIDBAR™ (mm)
Length(mm)
Hex A/F(mm)
Hex A/C(mm)
RB12NG 12 40 25 25
RBA16NG 16 45 30 34
RBA20NG 20 45 36 42
RB25NG 25 65 46 53
RB32NG 32 82 55 63.5
S171
REIDBAR™ – Threaded Inserts Galvanized
ProductCode
Suit REIDBAR™ (mm)
Length (mm)
Thread Depth (mm)
OD (mm)
Foot Diameter (mm)
RB12TIG 12 100 53 22 38
RBA16TIG 16 118 47 30 50
RBA20TIG 20 148 60 35 64
RB25TIG 25 191 78 43 80
RB32TIG 32 210 102 55 101
S177
50
0P
LU
S® R
EID
BA
R™
• Fastening of structural elements• Bracing & tie back applications
• Soil anchoring
REIDBAR™ – Threaded Inserts Black
ProductCode
Suit REIDBAR™ (mm)
Length (mm)
Thread Depth (mm)
OD (mm)
Foot Diameter (mm)
RB12TI 12 100 53 22 38
RBA16TI 16 118 47 30 50
RBA20TI 20 148 60 35 64
RB25TI 25 191 78 43 80
RB32TI 32 210 102 55 101
S176
• Cast into concrete & designed to accept REIDBAR™ • Provide full anchorage in thin walled panels• Ensures suffi cient embedment to develop the full strength of the bar• On-site bending of bar is eliminated and site effi ciencies are improved,
resulting in faster fl oor cycles
National Product & Services Catalogue 2011/2012
90Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
REIDBAR™ – Grout Sleeve
ProductCode
Size(mm)
Length (mm)
Thread Depth (mm)
OD (mm)
Max Bar Embedment
(mm)
RBA16GS 16 240 47 50 190
RBA20GS 20 290 55 60 224
RB25GS 25 360 78 70 274
RB32GS 32 445 109 75 320
• Used for connecting REIDBAR™ lengths where one side of the connection cannot be spun• Used for converting to standard reinforcing bar or for vertical connections where continuity
of reinforcing is requiredS167
REIDBAR™ – Base Plates Galvanized
ProductCode
Suit REIDBAR™ (mm)
Length(mm)
Width(mm)
Thickness(mm)
RBA20BPG 16 or 2 0 100 100 6.3
RB32BPG 25 or 3 2 150 150 10
REIDBAR™ – Spherical Washers Galvanized
ProductCode
Suit REIDBAR™ (mm)
Dimensions – OD x ID x T (mm)
RBA20SWG 16 or 2 0 50 x 24 x 18
RB32SWG 25 or 3 2 70 x 37 x 24
• Used for soil nailing and rock anchoring when the REIDBAR™ is not perpendicular to the bearing face. The arrangement will accommodate an inclination up to 20˚.
• Used for soil nailing and rock anchoring when the REIDBAR™ is not perpendicular to the bearing face. The arrangement will accommodate an inclination up to 20˚.
S159
S175
REIDBOX™
ProductCode
Length (mm)
Width (mm)
Thickness(mm)
Punchout Hole Spacing(mm)
REIDBOX 750 100 35 50
• Plastic boxes used to position and locate REIDBAR™ threaded inserts and couplers
S301
50
0P
LU
S® R
EID
BA
R™
National Product & Services Catalogue 2011/2012
91Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
REIDBOX™ – Threaded Inserts
Product Code
Suit REIDBAR™ Threaded Insert
(mm)
Insert Spacing (mm)
Inserts/Box
RB12BOX150TI 12 150 5
RB12BOX200TI 12 200 4
RBA16BOX150TI 16 150 5
RBA16BOX200TI 16 200 4
RBA20BOX150TI 20 150 5
RBA20BOX200TI 20 200 4
• Pre-assembled boxes to suit specifi c project requirements• Offer a fast, cost-effective way to position and locate REIDBAR™ threaded inserts• Box length – 750 mm S178
REIDBOX™ – Couplers
ProductCode
Suit REIDBAR™ Coupler (mm)
Spacing (mm)
No. Per Box
RB12BOX150C 12 150 5
RB12BOX200C 12 200 4
RBA16BOX150C 16 150 5
RBA16BOX200C 16 200 4
RBA20BOX150C 20 150 5
RBA20BOX200C 20 200 4
S158
REIDBAR™ – Polyurethane Board
ProductCode
TypeThickness
(mm)Width(mm)
Mass(kg/m)
Length(mm)
RBBOARDS Single 30 90 2.8 As required
RBBOARDD Double 30 180 5.6 As required
• Max board length – 1200 mm
REIDBAR™ – Bolt
ProductCode
Suit REIDBAR™ fi ttings(mm)
RB12BOLT 12
RBA16BOLT 16
RBA20BOLT 20
RB25BOLT 25
RB32BOLT 32
S290
S300• Plastic holding bolt
50
0P
LU
S® R
EID
BA
R™
National Product & Services Catalogue 2011/2012
92Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
REIDBAR™ – Rebate Insert
ProductCode
Suit REIDBAR™ (mm)
Length (mm)
Thread Depth (mm)
Foot Dia (mm)
Cross Hole Dia (mm)
RB12RI 12 78 53 39 14.5
RBA16RI 16 96 47 51 14.5
• Designed to be used in thin walled panels and panels with rebates, where standard REIDBAR™ Inserts will not fi t
• Includes a cross hole to suit N12 bar • Minimum rebate of 25 mm required to achieve bar break connection
Ideal for: Precast wall panels.S272
REIDBAR™ – Metric Thread Couplers Galvanized
ProductCode
Suit(mm)
Length(mm)
Metric Thread Length(mm)
Hex A/C(mm)
RB12M16CG RB12 to M16 90 40 29
RBA16M20CG RBA16 to M20 102 45 34
S270
REIDBAR™ – Stick On Nailing Plates
ProductCode
Suit Fittings(mm)
RB12SP 12
RBA16SP 16
• Plastic• Support for fi xing to steel formwork for positioning all internally threaded components
S271
REIDBAR™ – Metric Thread Couplers Black
ProductCode
Suit(mm)
Length(mm)
Metric Thread Length(mm)
Hex A/C(mm)
RB12M16C RB12 to M16 90 40 29
RBA16M20C RBA16 to M20 102 45 34
S269
50
0P
LU
S® R
EID
BA
R™
• Ideal when a fully engineered, full capacity fi xing is required close to an edge, along an edge of a panel or at close spacings
• Premium alternative to ferrule anchor bars• Full bar break system is achieved when using REIDBAR™ Starter Bars and 8.8
grade metric bolts
National Product & Services Catalogue 2011/2012
93Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Reduce steelfi xing?Prefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
accessoriesconcrete&building
REIDBAR™ – Antenna Caps
ProductCode
Suit Fittings(mm)
RB12AC 12
RBA16AC 16
• Plastic• Used to seal and locate REIDBAR™ fi ttings in “near face” applications
S157
REIDBAR™ – Sealing Caps
ProductCode
Suit Fittings(mm)
RBA16CAP 16
RBA20CAP 20
RB25CAP 25
RB32CAP 32
REIDBAR™ – Nailing Plates
ProductCode
Suit Fittings(mm)
RB12NP 12
RBA16NP 16
RBA20NP 20
RB25NP 25
RB32NP 32
• Plastic• Support for fi xing to formwork for positioning all REIDBAR™ fi ttings
• Plastic• Used to protect the internal thread of the threaded inserts or couplers
S161
S170
50
0P
LU
S® R
EID
BA
R™
National Product & Services Catalogue 2011/2012
94Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Me
chan
ical Sp
lices
accessoriesconcrete&building
Couplers – Bartec Type B (Ancon®)
ProductCode
Suit Bar Size(mm)
Length(mm)
OD(mm)
Thread Type
BARTEC12B 12 32 21 Single & Extended
BARTEC16B 16 40 26 Single & Extended
BARTEC20B 20 48 32 Single & Extended
BARTEC24B 24 60 40 Single & E xtended
BARTEC28B 28 66 45 Single & Extended
BARTEC32B 32 72 50 Single & Extended
BARTEC36B 36 84 57 Single & Extended
BARTEC40B 40 90 62 Single & Extended
Couplers – Bartec Type A (Ancon®)
ProductCode
Suit Bar Size(mm)
Length(mm)
OD(mm)
Thread Type
BARTEC12 12 32 21 Single
BARTEC16 16 40 26 Single
BARTEC20 20 48 32 Single
BARTEC24 24 60 40 Single
BARTEC28 28 66 45 Single
BARTEC32 32 72 50 Single
BARTEC36 36 84 57 Single
BARTEC40 40 90 62 Single
• Utilises internally threaded couplers with a single right hand thread• Used for applications where the bar can be rotated
• Uses the same coupler as the Type A, but one bar is threaded for a full coupler length • Used for applications where it is diffi cult but not impossible to rotate bar
Couplers – Bartec Type C (Ancon®)
ProductCode
Size(mm)
Length(mm)
OD(mm)
Thread Type
BARTEC12C 12 32 21 Single & Extended
BARTEC16C 16 40 26 Single & Extended
BARTEC20C 20 48 32 Single & Extended
BARTEC24C 24 60 40 Single & E xtended
BARTEC28C 28 66 45 Single & E xtended
BARTEC32C 32 72 50 Single & E xtended
BARTEC36C 36 84 57 Single & E xtended
BARTEC40C 40 90 62 Single & E xtended
ProductCode
Size(mm)
Length(mm)
OD(mm)
Thread Type
BARTEC12LN 12 11 21 Extended
BARTEC16LN 16 13 26 Extended
BARTEC20LN 20 16 32 Extended
BARTEC24LN 24 20 40 Extended
BARTEC28LN 28 22 45 Extended
BARTEC32LN 32 24 50 Extended
BARTEC36LN 36 28 57 Extended
BARTEC40LN 40 30 62 Extended
S5
S246
S247
tt
2t
t 2t2t
2tt2 2/3t
2/3t
• Locknut required• Used for applications
where the bar cannot be rotated
• Uses the same coupler as type A, but one bar is threaded 1 1/3 of coupler length
National Product & Services Catalogue 2011/2012
95Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Me
chan
ical Sp
lices
accessoriesconcrete&building
Couplers – MBT (Ancon®)
ProductCode
Suit Bar Size(mm)
Length(mm)
OD(mm)
Mass(kg)
MBT12 12 140 33.4 0.7
MBT16 16 160 42.2 1.2
MBT20 20 204 48.3 2
MBT24 24 258 54 3
MBT28 28 312 66.7 5.8
MBT32 32 312 71 6.5
MBT36 36 420 75 8.6
MBT40 40 484 81 11.3
• Mechanically bolted coupler that doesn’t require bar end preparation or rotation • The bolt heads shear off at a predetermined torque to provide an instant check of
correct installation
Ideal for: Column splicing, bridge applications, piling, splicing to protruding dowels cast in concrete, closure pours, beams.
S6
Couplers – Lenton® (Erico®)
ProductCode
Suit Bar Size (mm)
Length(mm)
OD(mm)
LA212 12 60 22
LA216 16 75 27
LA220 20 87 30
LA224 24 99 35
LA228 28 106 38
LA232 32 110 44
LA236 36 130 48
LA240 40 149 52
• Unique self-aligning taper-threaded design provides continuity and structural integrity • Minimal “slip” and excellent cyclic performance • Provides full strength in tension, compression and stress reversal applications • Quick and easy to install • Provides full load transfer
S103
FREE! Reo Wire Mesh Gauge• Confi rm key REOMESH® sizes from SL52 through to
RL1218 and also Trench Mesh sizes in 8, 11 and 12 ranges.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
96Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Me
chan
ical Sp
lices
Position Couplers – Lenton® Type 13 (Erico®)
ProductCode
Suit Bar size (mm)
Length(mm)
Extended Length(mm)
OD(mm)
LP1312 12 119 162 22
LP1316 16 136 181 27
LP1320 20 175 228 33
LP1324 24 195 255 41
LP1328 28 207 272 46
LP1332 32 223 288 52
LP1336 36 243 316 58
LP1340 40 270 351 64
accessoriesconcrete&building
• Tapered thread provides positive locking to reduce “slip”• Designed to splice two curved, bent, or straight bars, when neither bar can be rotated• Designed to splice bars where the bar is restricted in its axial movement or cannot be rotated
Ideal for: Joining prefabricated cages, bored pile cages and diaphragm walls.
Couplers – Lenton® Lock (Erico®)
ProductCode
Suit Bar Size (mm)
Length(mm)
OD(mm)
Mass(kg)
LL12 12 127 29 0.6
LL16 16 159 35 0.9
LL20 20 222 48 1.4
LL24 24 254 54 3.4
LL28 28 287 60 4.6
LL32 32 323 65 5.9
LL36 36 358 70 7.9
LL40 40 400 80 10.9
• Works in repair, bent bar, retrofi t, precast and new construction applications • The bolt heads shear off at a predetermined torque to provide an instant check of
correct installationIdeal for: Column splicing, bridge applications, piling, splicing to protruding dowels cast in concrete, closure pours, beams.
S105
S302
Weldable Couplers – Lenton® (Erico®)
ProductCode
Suit Bar Size(mm)
Length(mm)
OD(mm)
EL12C2 12 30 20
EL16C2 16 40 25
EL20C2 20 50 30
EL24C2 24 55 40
EL28C2 28 55 40
EL32C2 32 60 50
EL36C2 36 65 60
EL40C2 40 75 60
• Designed for connecting reinforcing bar to structural steel sections or plates • Made of low carbon steel suitable for welding • Preformed J groove to receive weld • Provides full load transfer
S107
National Product & Services Catalogue 2011/2012
97Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Head
ed
Re
info
rcing
accessoriesconcrete&building
Anchors (Ancon®)
ProductCode
Suit Bar Size(mm)
Length(mm)
OD (mm)
ANCHOR12 12 16 38
ANCHOR16 16 20 50
ANCHOR20 20 24 64
ANCHOR24 24 30 76
ANCHOR28 28 33 89
ANCHOR32 32 36 102
ANCHOR36 36 42 114
ANCHOR40 40 45 127
• Creates an anchorage in the concrete• Replaces need for cogged or hooked bar ends
S4
Terminators – Lenton® Type D6 (Erico®)
ProductCode
Suit Bar Size (mm)
Length(mm)
OD(mm)
LT12 12 14 35
LT16 16 22 35
LT20 20 29 48
LT24 24 35 57
LT28 28 38 70
LT32 32 40 76
LT36 36 43 83
LT40 40 61 95
• D6 = 5 x bar cross section area• D14 = 10 x bar cross section area available • Utilises “shear cone” theory• Eliminates rebar hook - simplifi es bar placement • Minimises embedment lengths – reduces congestion • Improve concrete placement • Allows greater design fl exibility • Faster installation lowers in-place costs
S106
Did you know…You can pick up concreting and building accessories from any of our 39 branches Australia wide.
National Product & Services Catalogue 2011/2012
98Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Pu
llou
t Bar B
ox
accessoriesconcrete&building
Pullout Bar Box – Keybox (Ancon®)
ProductCode
Bar Diameter (mm)
Bar Spacing (mm)
Bar Shape
Suit Slab(mm)
KB85L7 12 150 L 85
KB85L9 12 150 L 85
KB85S7 12 200 L 85
KB120U4 12 200 U 130 - 150
KB120U5 12 200 U 130 - 150
KB120U7 12 150 U 130 - 150
KB150U5 12 200 U 160 - 200
KB150U6 12 200 U 160 - 200
KB150U7 12 150 U 160 - 200
KB150U9 12 110 U 160 - 200
KB150U11 12 110 U 160 - 200
KB190U5 12 200 U 200 - 250
KB190U7 12 150 U 200 - 250
KB190U9 12 110 U 200 - 250
KB190U11 12 110 U 200 - 250
KB270U7 12 200 U 270 - 3 00
KB120U6 12 200 U 130-150
KB150U4 12 250 U 160-200
KB190U4 12 250 U 200-250
KB190U6 12 200 U 200-250
KB220U5 12 200 U 250-300
KB220U9 12 110 U 250-300
KB220U6 12 200 U 250-300
KB220U11 12 110 U 250-300
• Quick and easy to install • Maintains continuity
of reinforcement at construction joints in concrete
• Simplifi cation of formwork design
• No need to drill shuttering• Risk of injury from
projecting bars is minimised
S3
Need more technical data? NEW REODATA 4.0
Available Now!
To receive your FREE copy, call into your nearest branch or visit www.reinforcing.com
3
www.reinforcing.com | www.reinforcing.tv 3
Along with REODATA, we also have a range of reinforcing essentials, guides and resources that will benefit your next project including:
REOWORKS – comprehensive CD and DVD combination for everything on REO including case studies, videos and technical data.
REO CALCULATOR – for steel reinforcement area calculations.
REO WIRE GAUGE – for measuring REOMESH® wire diameters.
REO BAR GAUGE – for measuring REBAR diameters.
NATIONAL PRODUCT & SERVICES CATALOGUE – the most comprehensive guide to reinforcing available anywhere today.
REINFORCING.COM – the online resource for products, technical data, case studies and testimonials that’s right at your fingertips.
REINFORCING.TV – our YouTube™ channel where you can see our products and services in action and listen to our customers talking about the benefits they get from using our reinforcing solutions.
To keep you up to date on all our reinforcing products, visit the ‘Register for Updates’ page at www.reinforcing.com
b h i it i f i
ooorrrcccciinnngg..tv
Along with REODATA, we also have a range of reinforcing essentials, uides and resources that will benefit your next project including:
VD combination for
www.reinforw reinforww reinww reinfoww reinfoww reinforw reinfow reinforwww.reinforreinfwww reinforwww reinforieinfowww.rewww.reinforffww reinforww.reinforinfow.reinforww.reinforww.reinforwww rwwww rww.reinforw reinforw reinforwww.reinfornforww.reinforwww reww.reinforw.reinforreinreinforreeine nnnfwwwwwwwwwwwww.reinforeinfewww re nww.rein oowwwwwww.reinfowwww.reiwww.reinfwww.reinforreinfor i foowwwwwwwwwwwwwww.rwwww.reinfw.reinfw.reinfowww.reinreinreinfeinfoeeiinn oorwwwwwwwww.reinwwwwwwww.w.re.rrreineinii foowwwwwww.w..rrrreeeeeinn ooorrrrcing.comingg.coming.comng.com cing.cocing.comcing.com ing.com cincing comiiing.comg.comg.com.ccing.cocingcing.comcing.comcing.comcinging.cominnng.cong.com nggg.comcing.comccccomcooooommmmmmmmcing.com cingcing cong.comng comgcing.cng.c.cocom cooooommmmmmmcing.ccing.comccingcing.com ng.com nng.congggng.com g.comcoommmom ccincccing.com ing.com nng.comngggg..ccommcing.cocincing.cocing.coming.comng.comngg ccooommg.com cing.cccccinngg. oomm gg | www.re|| www.rei| www.reiwwwwww reiwww.reiwwww.reiwww.reiw.reiwww.rewww.rei| www.reiwww.rei www.rewww.ww.reiww reiww reiw rrww.reiw.reiwwww.rew rerewww.reeeww.reii| ww| www.rei| wwww.rew| wwww reieeiw.rei|| wwwwwww.rwww.r ii||| wwwww.rwwww.reiwww.reiww.rw rrr| www|| w| wwwwwwwwwwwwwwwwwww.w.re.rre|| wwww wwwwww wwww| wwwwwwwwww.rw..rreeeii|||| nfonfnfonfnfonnfnfnfonnfnfnnnnnnfffoonnnfnfffoonnnfnnnnff
guides and resources tha
REOWORKS – comprehensive CD and DVD combination foor everythievereverything everythverything oerything orything oything oeverythiverythveveeeverytheverytherythrryeveryeverytrrythinyythineveryythinyttheveryytthhhi gg n REO includn ing case studies, videosvideoseos and technicand technicand technical datal data.tataal data.atal dataaa.attaaadata.daataadatal data.l dddddata..aalll t
REOOO CCALCLCCALCCCCCAAAAAALLLLCCCCUUUUUUUULATOLALAAATATTTTOTOOLATOLATOTOTTOTOOOOOLLATOL RRRRRRRRRRR for stfor steelt l– for steel– for steelor s– for ste– for ste for stefor steeffor steel forfoor sor ssteer st eeel reinforcemereinforcemeeinforcemereinforcemenforcereinforei ef emmeeentnt ant arnt areat area carea calcrea calccalclarea calt area calcccccalccrea cat area cacalla calccca calcareaa cccccaa callrea calclcaaarnt arearea caa ca caaannn eea cca ulations.ulatlluuuuu
REERERERERERRREOOOOOOOOOO WWWWWWWIIIIRE GRE GRERRREEEERE GGGGGRREEEEE RREEEEE E AAAAAAAAUGEUUGGGGGUGEEEE – for measussuor measuor measu for m for mefor mfor mmeeeeaaasuring REOMring REOMEring REOMEEng REOMESring REOMESS REOMESring REOMESHMring REOMring REOMREOMng REOMESing REOMEring REOMEg REOMESOOREOng REOMng REOMEng REOMEREOMnggg Ering REOOingg Rgg ® wire diameters.
REREREOOO BBBAAAARRRRR GGR GRRRRR GRRR GRRRRR GRRRRRR GR GAUGE – for measuring REBAR diameters.
NNNATIONATIONANATIONALATIATIONAAATIOATATIONTIONATTIIONALONONALONAONNNNAATIONAAANATIONALLALLNATIONALNATIONNATIONNATIONALNATIONANATIONALAATIONAATTIONALOONAOOO AAALAATIONALLNNNATATIONAATIOTIONAOONANNNAAAALLNATIONNATNAAATIAATT OONALAALLNATITTIOOOOONAAALLNNNAAAL PRPPPPRRRRRPPPPRPRRRRPPPRRRRPPPRRPPPPRRRRPPRRRROOOOOOOOOOOOOOOOOOOOOOOOOOODDDDDDDDDDDDDDDDDDD RVICES CATALOGUE – the mosststtttttttttttt tcomprehensivehehhhcomprehensihhompreheensiveeennccccomprehheeeenncomprehensivomprehenomprehensivompromprehensmprehensimprehensimprehensivmprehensivmprehensivprehensivhehensieeneehheeennhheeeenncomprehensnns e gu einforcing a where today.re todaywhere todayy.e ewhere todaddwhere today.where twwhhhhhere today.eeer y.where todhere todwhere todawhhhhhere todayere todayhere todeerre todare toreeee ttterewhere towhhhere toheerrhereewhere tode e where today.ttooooddddwhewwhewhhhere toeerre te tode e toere to aaayyyy..y
REREINFONFOOOORRRCINCINC NNGGG.G.G.GGGGGGGGG COCOCOCOO oducts,oducts,oodd technical d technical dtechnical dchnical dhhhhnical dnical diiiccal dl dal dl dcal dcal dl dddcal dhhhnicaic l ddhnnnnicaaall ddnniicaal dnniiccccaanniiicccaannicc tttttttatattataatatataaaata,aattaaata, ata,taa,,case studiescase studiesse studiesessse studiesssuuuddiesuuudddddiieeeuuudddddiieeeesudiess annd tnd d tnd tnnannnaaaan nials that’s right at yo fififingertipsfingertipsfingertgertfifingertipsfifingefifi p ..
REREEINFOINFONFOINFONINN RRCINCINC NNNNNNNNNCINNNNNNNGGGGGGGG.G.GGTTTTTTTTTTT. rre you care you care yorrrrrrr n see our n see our o rure ouuruuuproducts andproducts andt ddtttssproducts a ddproducts atttstsproducts a dts ducts ddd servservseseer action and listen to ou customerscustomers customt erscustomt eersrrrssc erserserssc ersc errrc rrssss c e ss talking kalking ka ktalkinttttataaatttatalkabout about the beth btthhh bhhee bhe bbbabout ttthhhhee e be beeabout tthethhheeeaba tthhheeut tthhee ettthhe bttthhhhee b fifitfifitnefineefifififitnefifififififineefififififi et from usin ooooooooorcing solutrcing sorcing so tiiircing soo uttiiso iinn o in oo iioons. nsooonooonooononon .on
TTTTTTTTo keep you uo keep you uo keep y uuuep you uukeep you uuuuup o uup tp tp pp p propproppp ducts, visitducts, visitviii, visvis visiiisit, viivisic , vvivivissisis vvissis vvs issssd tsss,, s the the the hetheetTTTTTT‘Register foRegister foRegister fogiste‘Registerer fogisterer‘ egisterRRRRegister foRReegistergiRRRegister fRReegistereegggggiiistesssRegiRegister fegister fgister ggRegissssstttteeeerr eg steeg steegegegeeeggg ssstttee ooog rrr UpUr Upr Uprr Ur UpUprr Ur UUpr UUUpUppUUUUUppp nngggnggnngnngg.com.com
ESSENTIAL TECHNICAL DATA ON STEEL REINFORCEMENT
DUDUDUDDUUUUUDDUUUUUDUUUUUDDUUUCTCCCCCCCCCC & SERVERVVICICICEES CATALOLOGuide to rid to rto ro ro ro reeinforcing aeinforcing aeinforcing aeinforcing availavailablvailable anailable ane anyvaila eee anyaaaaneee anaaaannyannynnyyyyvail eee ananyananannyynye anyee anyanyaanynyyyeee an anyaanya yee ananyannyywwwwwwwwwwwwwwwwwww
OOOOOMOMMMMMOMO – t t ththethethethe hethe ohe ohe ohe ohe online onlin– e resoure resource fsource fsource fource fource fource furce furce foooooororr proooo otesteststitimtimtimmmomomotesstimmestimmimimmte mmm nials that’snials that’sals that’s right atright atat at at at t yt yt yyoyoyoat yyrig ur fififi
TTTTTVVVVVVVVVVVVV ––––– our– our Yr YouTu–––––– ooo o be™ chanannel nnel wwwwhwhwhhererrwwwhwhww rw rrvrvvviicicccecess is ininrvviiciccessesvi sc sv ss action and listen tto oto oououuuuuuouurr cr cr ccrtttss ttthhhhetheyy gfittttssss ttthhhhhefittssss tssfitsfittttssss ttthh et from using ourr reir reinnnnnffffonffoooon
ttottooo o ddddadadatete e ono ddaaate ono daateteeee onate ondaaaattetteeeee onooonne onatteee oonoonnnaaatttte oonnaatttteeee oooo all our reiall our rall oall our reiall ourall our raallaall aall oaallll oul ouooo raaa ou eoooouuu nforrcingrcinggg g ppppgg pppgg ppdapdaaatttttees’s’p aattteeeeses’es’ttteeeeesss’ddaaadaatttteeeessspppddddpdapdaaatttteeppppdaddddaaaaatttteeeespdaatttteeeeessssp page at wwpage at wpage at wpage at wwwpage page at wwpage at wwwage at wwwe at wwwe at wwwpage at wwwge at wtge att wwwage at wat wge at wat wage at we at wwt wwwpapppage at wwwage at wwee at wwge att wwat ww at wwt wwwpage at wwwwwwwge at wwwpppp gegeee at wwwe at wwwaatt e at wwwwat wwwwe at wwwppp ge at wwwege at wwwat wwwwwwwwwppppaaaage at gggeee at wwwt wge at wwwwwwwwpp ge wwwwwppag ttppp g .reinfor.reireiinfffforfnforeinforcciciiinreinforreinforereinneinfofonforeinfoorrrccccciiinnncinrereinforeeeeinneinf rrrcccciciinnnnnreinfoinnnnfffeinfooorrrrccccinnn..rr.reinfoin orrrrccccciiinnnnn.reinfoeinn orrrrcccinnnnoo ccc
REINVENTING
REINFORCIN
G
www.reinforcing.com
www.reinforcing. tv
4.0
Build with OneSteel Reinforcing
National Product & Services Catalogue 2011/2012
99Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Pu
llou
t Bar B
ox
Pullout Bar Box – Rebox® (Danley®)
ProductCode
Bar Diameter (mm)
Bar Spacing (mm)
Box Length (m)
Suit Slab (mm)
REB151512 12 150 1 150 - 160
REB151516 16 150 1 150 - 160
REB152012 12 200 1 150 - 160
REB152016 16 250 1 150 - 160
REB152512 12 250 1 150 - 160
REB152516 16 250 1 150 - 160
REB153012 12 300 1 150 - 160
REB153016 16 300 1 150 - 160
REB181512 12 150 1 180 - 2 00
REB181516 16 150 1 180 - 2 00
REB182012 12 200 1 180 - 2 00
REB182016 16 200 1 180 - 2 00
REB182512 12 250 1 180 - 2 00
REB182516 16 250 1 180 - 2 00
REB183012 12 300 1 180 - 2 00
REB183016 16 300 1 180 - 2 00
REB251512 12 150 1 250
REB251516 16 150 1 250
REB252012 12 200 1 250
REB252016 16 200 1 250
REB252512 12 250 1 250
REB252516 16 250 1 250
REB253012 12 300 1 250
REB253016 16 150 1 250
REB301512 12 150 1 300
REB301516 16 150 1 300
REB302012 12 200 1 300
REB302016 16 200 1 300
REB302512 12 250 1 300
REB302516 16 250 1 300
REB303012 12 300 1 300
REB303016 16 300 1 300
• Floor to wall reinforcing bar joining system
• Unique dimpled rebate box stays in place eliminating the need for scabbling
• Galvanized steel rebate box
S60
REINFORCING.TVOur latest videos and case studies are right here to view on our new YouTube™ website. It’s here you’ll discover why so many projects big and small use OneSteel Reinforcing products.
Visit us now on www.reinforcing.tv
National Product & Services Catalogue 2011/2012
100Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Bracin
g S
ystem
s
accessoriesconcrete&building
REIDBAR™ – Bracelok® Kits Galvanized (Danley®)
REIDBAR™ – DBracket Kits Galvanized (Danley®)
ProductCode
Suit REIDBAR™ (mm)
RB12BKG 12
RBA16BKG 16
RBA20BKG 20
RB25BKG 25
ProductCode
Suit REIDBAR™ (mm)
RB12DKG 12
RBA16DKG 16
RBA20DKG 20
RB25DKG 25
• Used with 12, 16, 20, and 25 mm diameter 500PLUS® REIDBAR™
• Hot dip galvanized malleable iron components• Bracing system utilises full capacity of high-tensile 500PLUS® REIDBAR™
• Supplied in fl at-pack kit form or assembled on bar• Available ‘off-the-shelf ‘ in convenient kit packaging• No threading• No turn buckles• Adjustable on site• Simple to extend or shorten• Fast installation
• Kit form bracing system, with D-Bracket castings• Used with 12, 16, 20, and 25 mm diameter high-tensile 500PLUS® REIDBAR™
• Galvanized components• Supplied in fl at-pack kit form or assembled on bar• Standard components available “off the shelf” in convenient kit packaging• No threading or turnbuckles• Adjustable on site• Fast installation
S291
S164
REIDBAR™ – Speedibrace™ Kits Galvanized (Danley®)
ProductCode
Suit REIDBAR™ (mm)
RB12SBKG 12
• Light-duty bracing system with easy adjustment• Used with 12 mm diameter 500PLUS® REIDBAR™
• Galvanized components• Supplied in fl at pack kit form or assembled on bar• Accommodate posts 40 – 110 mm thick• No cleats, so no welding• Fast installation
S173
National Product & Services Catalogue 2011/2012
101Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
TR
US
SD
EK
®
TRUSSDEK® Structural Decking
TRUSSDEK
Developed for use in high or low rise residential, commercial, mining or infrastructure applications in either steel or concrete framed construction.
Truss - Solid/Truss - Solid
Truss - Voided/Truss - Voided
Truss - Solid/Infi ll - Solid
Truss - Voided/Infi ll - Solid
TRUSSDEK® Long Span Structural Decking
Average concrete depth saving in voided slabs (mm)(TRUSSDEK® panels are precambered in the factory to prevent concrete ponding)
TRUSSDEK® Panel Code
TRUSSDEK® Composite Slab Type (see fi gures opposite)
Truss-Voided/Truss-Voided Truss-Voided/Infi ll-Solid
TD90 55 25
TD110 65 30
TD140 75 35
TD160 85 40
Overall depth of TRUSSDEK®
panels is 90, 110, 140 or 160 mm standard (Pre-punched holes in panel webs are from 50 mm deep and 90 mm long)
Overall Composite Slab Depth Dcs
(mm)Span Chart for Truss - Voided/Truss - Voided Slabs in
Unpropped Construction using Simply-Supported Panels
Benefi ts• Spans up to 8 m without propping
• Combines formwork and slab reinforcing
• Offers full composite action in steel framed structures
• Creates a stable working platform supporting full construction loads
• Manually installed using safe working methods
• Simple installation to improve cycle time
• Ability to reduce slab thickness and reinforcing
• Designed precamber to provide fl at soffi ts to simplify fi t-out and reduce concrete volumes
• Suitable for both one way and two way slab action
National Product & Services Catalogue 2011/2012
102Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Co
nstru
ction
So
lutio
ns
Civil Construction Solutions
In addition to our standard range of processed reinforcing bar and cut & bent reinforcing mesh. OneSteel Reinforcing has a number of Civil Construction Solutions to provide you with opportunities to save money, time and effort.
Products suitable for• Piling
• Ground Anchoring
• Footings
• Culvert Bases
• Wind Tower Bases
• Columns
• Tunnel Construction
• Beams, Girders, Planks
• Concrete Paving
• Barriers & Screens.
Commercial Construction Solutions
OneSteel Reinforcing has developed a range of innovative steel reinforcing solutions to streamline Commercial Construction developments and take steelfi xing off the critical path, adding to time, cost and labour savings.
Our range includes• Rebar Solutions
• Threaded Rebar System
• Prefabricated Reinforcing
• Lattice Girders
• Construction Accessories
• Steel Decking
• 500PLUS® BAMTEC® Reinforcing steel rollout carpet
• Engineered mesh
National Product & Services Catalogue 2011/2012
103Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
accessoriesconcrete&building
Bondek® Formwork/Slab Span Tables
Material Specifi cation (BlueScope Lysaght)
BONDEK® (BlueScope Lysaght)
Features & benefi s
• Excellent spanning capacities for greater strength and less defl ection
• Acts as permanent formwork with minimal propping and no stripping of formwork is required
• Fast and easy to install (590 mm wide) with less handling required
• Works as composite slab saving on concrete and reinforcement costs
• Increased unsupported spans of BONDEK® sheeting
• Backed by a BlueScope Steel warranty
Single Spans Maximum Spans (mm) for Defl ection L/240 Equal formwork spans
Thickness(mm)
Mass Yield Strength(MPa)
Coverage(m2/t)kg/m2 kg/m
0.60 8.52 5.03 550 117.3
0.75 10.50 6.20 550 95.2
1.00 13.79 8.14 550 72.5
Slab Thickness
(mm)
0.6 BMT* Bondek 0.75 BMT* Bondek 1.0 BMT* Bondek
No of props per slab span No of props per slab span No of props per slab span
0 1 2 0 1 2 0 1 2
100 2000 4800 5350 2150 5350 5350 2350 5350 5350
110 1900 4700 5750 2050 5700 5750 2250 5750 5750
120 1800 4550 6100 2000 5550 6100 2200 6100 6100
130 1750 4450 6450 1950 5400 6450 2150 6000 6450
140 1700 4350 6400 1900 5300 6850 2100 5900 6850
150 1650 4250 6200 1850 5200 7100 2050 5750 7200
160 1600 4150 6050 1750 5050 6900 2000 5650 7550
170 1550 4100 5850 1750 5000 6750 1950 5550 7500
180 1550 4000 5700 1700 4900 6550 1900 5400 7350
190 1500 3950 5550 1650 4750 6400 1850 5300 7200
200 1450 3850 5400 1600 4650 6250 1850 5200 7050
210 1400 3800 5300 1550 4550 6150 1800 5050 6900
220 1400 3750 5200 1550 4450 6000 1750 5000 6800
230 1350 3700 5050 1500 4350 5900 1700 4900 6650
240 1350 3600 4950 1500 4300 5800 1700 4800 6550
250 1.3 3.55 4.85 1.45 4.2 5.65 1.65 4.75 6.45
Note: Coverage fi gures are approximations.
* – BMT = Base Metal Thickness (mm)
National Product & Services Catalogue 2011/2012
104Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
Two SpanMaximum Spans (mm) for Defl ection L/240 Equal formwork spans
Slab Thickness
(mm)
0.6 BMT* Bondek 0.75 BMT* Bondek 1.0 BMT* Bondek
No of props per slab span No of props per slab span No of props per slab span
0 1 2 0 1 2 0 1 2
100 2400 4800 5350 2900 5350 5350 3250 5350 5350
110 2350 4700 5750 2850 5400 5750 3150 5750 5750
120 2250 4550 6100 2750 5250 6100 3050 5800 6100
130 2200 4450 6450 2700 5100 6450 3000 5650 6450
140 2150 4350 6550 2650 5000 6850 2950 5550 6850
150 2100 4250 6400 2600 4850 7200 2850 5400 7200
160 2050 4150 6200 2500 4750 7100 2800 5250 7550
170 2050 4000 6050 2500 4600 6950 2750 5150 7700
180 2000 3900 5900 2450 4500 6750 2700 5000 7550
190 1950 3800 5750 2350 4400 6600 2650 4900 7350
200 1900 3700 5600 2300 4300 6450 2600 4800 7200
210 1900 3650 5450 2250 4200 6300 2500 4700 7100
220 1850 3550 5350 2200 4100 6200 2500 4600 6950
230 1850 3450 5200 2150 4050 6050 2450 4550 6850
240 1800 3400 5100 2150 3950 5950 2400 4450 6700
0.25 1750 3350 5000 2100 3900 5850 2350 4400 6600
Three SpanMaximum Spans (mm) for Defl ection L/240 Equal formwork spans
Slab Thickness
(mm)
0.6 BMT* Bondek 0.75 BMT* Bondek 1.0 BMT* Bondek
No of props per slab span No of props per slab span No of props per slab span
0 1 2 0 1 2 0 1 2
100 2400 4800 5350 2700 5350 5350 3000 5350 5350
110 2350 4700 5750 2600 5400 5750 2900 5750 5750
120 2250 4550 6100 2550 5250 6100 2850 5800 6100
130 2200 4450 6450 2500 5100 6450 2750 5650 6450
140 2100 4350 6550 2450 5000 6850 2700 5550 6850
150 2050 4250 6400 2350 4850 7200 2600 5400 7200
160 2000 4150 6200 2300 4750 7100 2550 5250 7550
170 1950 4000 6050 2250 4600 6950 2500 5150 7700
180 1900 3900 5900 2150 4500 6750 2450 5000 7550
190 1850 3800 5750 2100 4400 6600 2400 4900 7350
200 1800 3700 5600 2050 4300 6450 2350 4800 7200
210 1750 3650 5450 2050 4200 6300 2300 4700 7100
220 1700 3550 5450 2000 4100 6200 2250 4600 6950
230 1650 3450 5200 1950 4050 6050 2200 4550 6850
240 1650 3400 5100 1900 3950 5950 2150 4450 6700
0.25 1600 3350 5000 1850 3900 5850 2150 4400 6600
Bondek® Formwork/Slab Span Tables
* – BMT = Base Metal Thickness (mm)
* – BMT = Base Metal Thickness (mm)
National Product & Services Catalogue 2011/2012
105Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
Bondek® Accessories (BlueScope Lysaght)
ProductCode
DescriptionSize(mm)
BDEND Poly Filler Strip –
BEF100 Edge Form 100
BEF120 Edge Form 120
BEF125 Edge Form 125
BEF150 Edge Form 150
BEF200 Edge Form 200
BEFM Edge Form Made To Order –
BEPP End Plugs (poly) –
PLINST Infi ll Strip –
Bondek® (BlueScope Lysaght)
ProductCode
Thickness(mm)
Length(m)
BD60 0.6 As required
BD75 0.75 As required
BD100 1 As required
• Effective Width = 590 mm, Height = 54 mm• Effi cient, versatile and robust formwork reinforcement and ceiling system for concrete slabs • Minimal propping and no stripping of formwork is required
Ideal for: Floor slab construction in residential, commercial and many industrial applications.
• A range of special fi xtures and fi ttings is available for use with LYSAGHT BONDEK®
S17
S18
Reduce steelfi xing?Prefabrication takes the steelfi xing of major structural components such as piles, ground beams, pad footings, columns, beams, arches and lattice girders off the critical path.
Call into your nearest branch or visit www.reinforcing.com
PREFAB
National Product & Services Catalogue 2011/2012
106Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
Temporary Propping Tables
Material Specifi cation (Fielders)
Base Metal Thickness
MassZinc Coating
(g/m2 ) (Z350)
Yield Strength
(MPa) (kg/m2)* (k/m)**
2-PAN 3-PAN 2-PAN 3-PAN
0.6 8.57 8.83 3.43 5.03 350 550
0.75 10.56 10.32 4.22 6.19 350 550
1.0 13.87 13.56 5.55 8.14 350 550
*Average mass of 2-PAN/3-PAN deck per plan area (kg/m2)**Mass of individual 2-PAN/3-PAN length (kg/m)
RF55 is available in two sheet widths. The traditional 600 mm wide cover, 3 pan, and the easy to handle, 400 mm wide cover, 2 pan. The RF55-2P is equivalent in all aspects technically to the RF55-3P. Similarly, the recommendations for RF55 in construction also apply to both RF55-3P and RF55-2P. Please check with your local branch as to which version applies in your state.
KINGFLOR® – RF55®
Features & Benefi ts
Fielders RF55 is a traditional fl at pan or ‘re-entrant’ profi le that provides unmatched performance in suspended concrete slabs. RF55 is used in both concrete and steel frame construction and utilises patented technology to achieve superior spanning capabilities, less defl ection and greater composite strength than similar re-entrant profi les. RF55 comes complete with a range of accessories allowing for easy suspension of ceilings and services.
• Stronger composite strength
• Greater spanning capacities
• RF55 is stronger than similar decks due to the patented ReLok corner embossments. ReLok develops a strong mechanical interlock with the concrete slab
• RF55 is stronger than similar decks in positive bending and end shear due to the dovetail ribs which resist lateral defl ection
Dcs*(mm)
Unpropped 1 Row of Props 2 Rows of Props
0.6BMT*
0.75 BMT*
1.0BMT*
0.6BMT*
0.75 BMT*
1.0BMT*
0.6BMT*
0.75 BMT*
1.0BMT*
100 2000 2250 2450 [4800] [5950] [6500] [7000] [8250] [9000]
110 2000 2200 2400 [4800] [5750] [6300] [7000] [8000] [8750]
120 1950 2150 2350 [4800] [5600] [6150] [7000] [7800] [8550]
130 1900 2100 2250 [4800] [5500] [6000] [6900] [7600] [8300]
140 1850 2050 2200 4550 [5350] [5850] [6650] [7400] [8150]
150 1800 1950 2200 4300 [5250] [5750] [6400] [7200] [7950]
160 1750 1900 2150 4100 5100 [5650] [6200] [6950] [7800]
170 1700 1850 2100 3900 5000 5500 [6000] [6750] [7650]
180 1650 1850 2050 3700 4850 5400 5800 [6550] [7550]
190 1600 1800 2000 3550 4750 5350 5600 6350 [7400]
200 1600 1750 2000 3400 4600 5250 5300 6200 [7200]
210 1550 1700 1950 3300 4500 5150 5150 6050 7000
220 1550 1700 1900 2900 4400 5100 4950 5900 6850
230 1500 1650 1850 2850 4300 5000 4450 5750 6700
240 1450 1600 1850 2750 4200 4950 4300 5600 6550
250 1450 1600 1800 2700 4150 4850 4200 5500 6400
RF55® Equally Spaced Props - Single Spans Maximum Spans (mm) for Defl ection L/240
* – BMT = Base Metal Thickness (mm) * Dcs = Depth of Composite Slab
National Product & Services Catalogue 2011/2012
107Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
Temporary Propping Tables
Dcs(mm)
Unpropped 1 Row of Props 2 Rows of Props
0.60 BMT*
0.75 BMT*
1.00 BMT*
0.60 BMT*
0.75 BMT*
1.00BMT*
0.60 BMT*
0.75BMT*
1.00BMT*
100 2350 2700 2950 [4650] [5550] [6050] [7000] [8150] [8900]
110 2350 2650 2900 [4650] [5400] [5900] [7000] [7950] [8700]
120 2350 2550 2800 4650 [5250] [5750] [7000] [7750] [8450]
130 2250 2500 2750 4650 5150 [5600] [6800] [7550] [8250]
140 2200 2450 2700 4500 5000 5500 [6550] [7350] [8100]
150 2100 2350 2600 4350 4900 5400 [6350] [7100] [7900]
160 2050 2300 2550 4200 4750 5300 6100 [6900] [7750]
170 2000 2200 2500 4000 4600 5200 6050 6650 [7600]
180 1900 2150 2500 3850 4450 5100 5750 6450 [7500]
190 1800 2100 2450 3650 4350 5000 5500 6300 7300
200 1750 2050 2350 3500 4200 4900 5300 6105 7100
210 1650 2000 2300 3400 4100 4800 5100 5950 6950
220 1500 1950 2250 3250 4000 4650 4900 5950 6800
230 1450 1900 2200 2900 3900 4550 4400 5900 6600
240 1400 1850 2150 2850 3850 4450 4250 5750 6500
250 1350 1800 2100 2750 3750 4350 4150 5650 6350
Temporary Propping Tables Notes• The tables above denote maximum allowable centreline
to centreline span in millimetres between permanent supports after temporary propping is removed
• The practical limit for span to slab depth ratio is considered to be 35 for single span slabs, or 40 for continuous slabs. Values above these limits have been listed in brackets “[ ]”. The use of the results in brackets must be confi rmed with the structural engineer or a Fielders representative as the long-term serviceability and composite performance of the resulting concrete slab may not be suitable for the project application
• Allowance has been made for ponding of wet concrete due to decking defl ection, wet concrete (density = 2400kg/m3)
• Loading is considered in accordance with AS 1170.0 : 2002 Structural design actions, AS 2327.1 : 2003 Composite Structures - simply supported beams, AS 3610 : 1995 Formwork for concrete with a Stage III construction live load allowance of 1.0 kPa in accordance with AS 2327.1 : 2003 Appendix F
• The requirements for Stage II & IV material staking loads in accordance with AS 2327.1 : 2003 Appendix F are assumed to be zero
• It is recommended that an experienced structural engineer design the composite slab to ensure suffi cient capacity to meet strength and long-term defl ection requirements
• The temporary propping tables have been prepared for a span/240 defl ection criteria. A span/240 defl ection is generally considered aesthetically satisfactory for exposed soffi ts
• These tables are based upon effective section properties of the sheeting calculated in accordance to AS 4600 : 2005 Cold formed steel structures
• Care must be exercised when placing concrete to avoid mounding
• Wide ply strips, of 300 mm wide shall be provided to prevent any concentrated loads being applied to the sheeting, particularly for exposed soffi ts, to avoid direct point loading of the sheet overlap ribs and unsupported edges of the sheeting
• When using the table for two or more spans the adjacent spans should not differ in length by more than 5%
• A maximum sheet length of 12 m has been considered
• A minimum bearing width of the permanent support has been considered to be 50 mm
• Fielders recommend a thickness of 1.00 mm BMT for exposed soffi ts in propped applications to avoid creasing of steel decking.
RF55® Equally Spaced Props - Two or More Spans Maximum Spans (mm) for Defl ection L/240
* – BMT = Base Metal Thickness (mm) * Dcs = Depth of Composite Slab
National Product & Services Catalogue 2011/2012
108Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
accessoriesconcrete&building
Kingfl or® – KF57 (Fielders)
ProductCode
Thickness(mm)
CKF75 0.75
CKF100 1
• Effective Width = 300 mm, Height = 57 mm• Composite steel/concrete slab system• Embossments and ribs provide an effective
mechanical interlock for the concrete• Span tables available upon request
Ideal for: Residential construction, multilevel carparks, multistorey buildings, commercial buildings and shopping centres.
Kingfl or® – KF70 (Fielders)
ProductCode
Thickness(mm)
KF60 0.6
KF75 0.75
KF100 1
KF150 1.5
• Effective Width = 600 mm, Height = 70 mm• Used for composite concrete slabs in
concrete and steel framed construction • Span tables available upon request
Ideal for: Residential construction, multilevel carparks, multi-storey buildings, commercial buildings and shopping centres.
Kingfl or® – RF55 (Fielders)
ProductCode
Thickness(mm)
RF5560G 0.6
RF5575G 0.75
RF551G 1
• Effective Width = 300 mm, Height = 55 mm• Traditional fl at pan or “re-entrant” profi le • Dovetail lapping ribs resist lateral defl ection
to enhance the spanning capacity and strength in positive bending and end shear
• Span tables available upon request
Ideal for: Residential construction, multilevel carparks, multi-storey buildings, commercial buildings and shopping centres.
S84
S248
S249
Need more technical data? NEW REODATA 4.0
Available Now!
To receive your FREE copy, call into your nearest branch or visit www.reinforcing.com
3
www.reinforcing.com | www.reinforcing.tv 3
Along with REODATA, we also have a range of reinforcing essentials,
guides and resources that will benefit your next project including:
REOWORKS – comprehensive CD and DVD combination for
everything on REO including case studies, videos and technical data.
REO CALCULATOR – for steel reinforcement area calculations.
REO WIRE GAUGE – for measuring REOMESH® wire diameters.
REO BAR GAUGE – for measuring REBAR diameters.
NATIONAL PRODUCT & SERVICES CATALOGUE – the most
comprehensive guide to reinforcing available anywhere today.
REINFORCING.COM – the online resource for products, technical data,
case studies and testimonials that’s right at your fingertips.
REINFORCING.TV – our YouTube™ channel where you can see our
products and services in action and listen to our customers talking
about the benefits they get from using our reinforcing solutions.
To keep you up to date on all our reinforcing products, visit the
‘Register for Updates’ page at www.reinforcing.com
a?
earestst
fooorrcrcccicininngngg.g.tvtv3
Along with REODATA, we also have a range of reinforcing essentials,
uides and resources that will benefit your next project including:DVD combination for
wwwww.reinforcwwwwww.reinfor
ww.reinforcww.reinforww.reinforcww.reinforww.reinforc
w.reinfow.reinforcw.reinfor
www.reinfowww.reinforcwww.reinwwww.reinforwwwwwww.reinforc
ww.reinforcwwww.reinforc
w.reinforcw.reinforc
www.reinfreinforcinforwww.reinforcwww.rewwwwwwww rwwwwwww.reinfow.reinforc
w.reinforcrreinforcr nforcfwww.reinforcwwwwww.reinfoww.reinfor
wwwwwwww.reinforcw.reinfo.reinforeinforc
ww.reeeinforcfnfowwwwwww.reinfor
wwwwwwww.reinforcw rreinfoinnnforc
wwwwww.reinforcww.reinfww.reinfwwwww.w.rereree orwwww.w..rrrreeeiiinnfofooorcc
w.w.rrereeeiiinnnffffoorceiiinnnffofoorccffffoooorrrrccing.com |ing.com | ing.com | ing.com ing.com iingngnging.com |ing.com | ing.com | ing.coininging.com ng cong.cogg.com |com |comcoing.coing.com | innnnggng.com | comcomoming.com |ing.com |ing.ciinnnngging.com | ccccomm ||ing.cong.com |ning.cnggg.comg.com.com.com | coooommminnng.comngggg.comccommmmming.com |nnng.comccom comcommcom |mm ||g.com |g.com |g mmm | mmom ||g com |g ccoo |||mmm | | ||| www.rewww.wwwwww.reinfo
www.reinfowww.reinfowwwwww.rwwww.reinfow.rei www.reinfo www.reiwww.reinwwwwww.reinw.reinfoww.rew.reinfw.r.reinfowwwwwwwww.reinwwww reinfw reinforww reiww.reinfoeinf ww wwwwwwwwwwwwww.reinww reiww..reinforrereeeinreinf ww wwwwwwwwwwwwww.reinfoeeinreinnfwwwwwwwwwwwwwwwwwww.rrereinfnnfnfwwwwwwww..rreineinnnf.reinffowww.ree nnfeiinnfff
guides and resources thaREOWORKS – comprehensive CD and DVD combination foor
eveverythingeverytheveryvvverything oerything on
erything on everytheverythivere ything on everyeveryeryrryeverythingryeverythyyyte yttthinthhhihhhi REO including case studies, videos and tec
deos and tecos and hnical data.hnical datanical datl tadaataataatl dattataaall ddddadadata.attatal data.ll tat
REOO CALCCCACCCCALCCACALCCAALALCALLLCCCCCUUUUUUUULATOLATLATOLATOLATOAATOATATOTTOTOOOL TOOOOORRRRRRRRRRR – for steel r– for steel r– for steel ror steel r–– for steel r– for steel r––– for st– for steel reel for forforfoor steel rfor sor sr stor ster stesteetteeeeeel einforcement a
einforcement aeinforcement aeinforcemeeinforcementeinfoeinforceeiinnf emmennt aeeennnntntt t aaat at aaaarerea crea calculatiocrea calcrea calcurea calculcula calculal
rrea caeea ceaa ca caaaallca calcccuurea calculateaeaa caaallclccccacaa ns.
REERRRRRRERREEEEOOOOOOO WWWW WWWWWIIIRE GRE GRRE GRRRREEREE GRREEE GEEE AAAAAAUGEUUUGUUUGUGGGEEE – for measuri for measur for measurifor measurifor measurifffor mor mear measur measurirr mmeasumeasuasuu iing REOMnng REOMng REOMg OMEEEESES
ng REOMESHng REOREOMESRng REOMESHOOMng REOMESEOMEREOMEng REOMEg REOMESESng REOMESSng Rng RREEOOMM SH® wire diameters.
REREREOOO B B AAARRRR RR GRRR GGRRRRR GGRRRRR GRRRR R GGRRR GGAUGE – for measuring REBAR diameters.
NNNATIONALNNATIONAATIONNATIONALNATIONATIONNNAATIONALATIONALAATATIOTIONATNNNATIOATIONALATATATIOTTTIIONAOONALONANATIONNAATIOAATIONALTTIONALIOONNNANANAAANATIOATIOATATTIOTIONONALONALNNAALLTTIONIOONNALAAALLLOOONNAAALLLNNNAALLLNNNAALLL PPPPPRRRPRPRPPPRRRRRRPPRPRPPRRRRPPPPRRRPRPPRRRRRPPRRRROOOOOOOOOOOOOOOOOOOODDDDDDDDDDDDDDDDD
RVICES CATALOL GUE – the mosststtttttttttstt t
ccomprehensive comprehensivccomprehensicoomprehensomprehensiveehcompreheoomomprehensm hhhemprehmpmpprehensivhheeepr hhheeeenneeehenshhhensiveennhheeneeenn vev gugu
where tre towhere toe toe twwhere twhere there twhwherereheww ewhewwhwhhehhhereherehhheeer twwhereeerrrerehere tohheree ttre ttooototooodaydday.y.dddday.dddadaydaaaayyyy..yy
REREINFONFOORRRRCICINCINNGG.G.GGG.GGG COCOCCOCO
oducts, techoducts te hhhho
hhhoducts, techn
ddddu hnhnnncc nnnnnnnniiiiciciiiccccal dataal dataal datalcal datacal datiiccal d tcal daaal datal datadaical dataddatacal daiccal datacal dacacal data,aal datal data,datadatical dattcal dataiiccccacal data, dddattaaiiicca aaatatacca ta,tal data,
case studies acase studies ast ssuuud sse uuuuddddidiudies auuuddddidiies aes eesddddidiieies ees aes as as aaaaannd tnd nnd ttnnnndnddnnn
fififingerfifinfingerfifingefifi gefifi tips.tips.ps
REREREINFOINFOINFOOIN RRCINININNNCININNNNINNNNNNNNGGG.GGGG.GTTTTTTTTTTT..
errererrrere you can see e you can see e you can see
u can see our our ourourour oouuuur
products and products and
rod tproducts andu ttproducts atstststs dd sd ss d sdd sd d d serverveee
cccustomccustomccustomcustostomcccu mers talking ers taerrs trs talking eers trsrsss keerrs ta kkkieersrrs tterrss ts ss ttatala
about thabout the benabout tbabouabout ttthhhhttthhhheeee bee benebbbabou ttthhhehee benebenebeeennnttththhhhee ennbeneetttthhheeetthhhe eneeeee benebbb eefifitfififitfififififittfifitfifififififififi
orcing sooorcing sooorcing scing sooo in oo nn oooolutions. luttiiiotiioioooonns. tioonontiontionoon .
TTTTTo keep you uo keep you uo keep yokeep uup up uup puupou uuuup t
products, vproducts,products, vprppr c s vvp ss, vdu s, v, vvvs,, vvvsss,s, v,, vvviisiisisiissiititisit the sit the isit theisiitisissi tthess eiisiss et
TTTTTT‘Register forRegister for‘RRRRegister forRegisterRegister RegisRReReeegistegister forerRegister for Register for Regiegeggggii eer forRRRRegegeggggister fiisss rr
ggg sststttee rtttteeeererr rrr ff roooorr UUpUpUUpUpUpUUUUUpUpppppp
ng.comg.comngngngngngngngg mmESSENTIAL TECHNICAL DATA ON STEEL REINFORCEMENT
DUDDUUDDDUUUDDDUDUUUUDDUUUUDDDUUUCTCCCCCCCC & SERVERVRVICICICEES CATALOOGuide to rididid to reto reinfo reinfo reinfo reinforcing availa
orcing availaorcing availorcing availabailabailable anywle ananyweee aanee anywe anywanaaanee anywe anywanywanaaanyannyyye anye e anywanyaanyye anywwwwee anywe anyaa ywaanaannnywwywyywwCOMCOMOOMMOMMMCOCOMOMMOMOM – t– t– the– thethe– thethe the othe othe o– he othe onhe online he online resourresource fsource foource foource foource fource fource force fource foororor pfor rorooo
testitetesteseestistimtimtimmmmmmonialmonialtimmmmtitimimmmm als that’s rights that’s rights that’s rig at at at atat yt yt yat at yt yyyyoyour fifififififiTTTTTVVVVVVVVVVVVVV ––– our our Y–– ur YouTube
––– oooo™ channnel wnnel wwwwwwwhwhherwwhhewherererer
rvrvrvivicicicicecescesrvviviciceess ivicic ss inin actessvi eses ion and listen to oto oououuuurr cou cuur cur cccttfitttssss ttthfittssss ttthhhhthetheyy get fsss thefittsss tfitfitttss tt
rom using ourr r reireinininnfnfnffofonfonnfoinfon ottotoo o dddadao d tattedaate on allo atate ateee on all
ddddaatattteteeate tteteee e on aonn alaattte ooon allonnon aeeee on aonnn aln alon alooo aaalallaalll our reinforc our reinooou orcirciouooour uuuur reirr n ngngg g g pppprg g pg ppprgg prppp
pdadpdaatp aatttteeteeseses’s’’pppdpdddaaaatttteeeeseses’s’pppdapdpdddadaaaatttteeeesesss’s’’p aatttteesaaatttteeeesessss page at wwpage at wwwpage at www.rpppage at wwwpage at wpage at www.rage at www r
page at www.rpage at www.rpapage at www.rppppage at www.rage at www.rage at wage at wwwge at wwwgeppp ge at www.rgeee at wtttpppppapage at wwe at www.re at www.ratt www.tge at www
ge at ww pppage at www.r
age at wwagage at www rgee at wwwatat wwge at www.ww
pp gee at wwwatat wwt www.rwww.rwwwwww rt www.rwwww.rp ggg aaatat ww.w.r
g aat www rwww.ww. einfoeiniieeinnnnfofffeinfoeinfoeinfoeeeinfoeinfoinnnforeinffonfoorreinforcieeinfoininnfonnforrrcrcccrciiicingeinfoeininnfffofooorrrcrcccciiinncingngeeiininn oorrrcrcccciiinnngngnnnfforrrcrcccciiinnngoorrrccciinnngngccccinngng
REINVENTING
REINFORCINGw
ww.reinforcing.com
www.reinforcing. tv
4.0
Build with OneSteel Reinforcing
National Product & Services Catalogue 2011/2012
109Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Metal D
eckin
g
Stramit Condeck HP® Span Tables
Material Specifi cation
STRAMIT CONDECK HP®
Stramit Condeck HP® composite decking speeds up construction of slabs.
The HP stands for "High Performance" and that's what you get. Stramit Condeck HP® composite decking provides you with a real time and money saving solution.
Features & benefi s
• Manufactured from high strength galvanized steel
• Base thickness 0.75, 0.9 and 1.0 mm
• Supplied with standard Z350 coating
• Alternative material available for highly corrosive environments
• Hinged Lapping – No need for side lap fasteners. Easier construction, plus time and cost savings
• Flat Soffi t – Flush fi tting panels from an attractive ceiling ready for painting
• Enclosed Ribs – No need for end closures
• Stud Flexibility – No restrictions on placement of shear studs. Allow lighter beams
Single Spans Double Spans
Thickness(mm)
Mass Yield Strength(MPa)
BMT* TCT* (kg/m2) (kg/m)
0.75 0.78 10.14 3.04 550
0.9 0.93 12.04 3.62 550
1.0 1.03 13.31 4 550
Slab Thickness
(mm)
Stramit Condeck HP® decking thickness
(mm)
0.75 0.9 1.0
90 2100 2350 2450
100 2040 2280 2380
110 1990 2210 2310
120 1940 2160 2250
125 1920 2130 2220
130 1900 2110 2200
140 1860 2060 2150
150 1820 2020 2100
160 1780 1980 2060
170 1750 1940 2020
180 1720 1900 1990
190 1690 1870 1960
200 1660 1840 1920
210 1610 1810 1890
220 1600 1790 1870
230 1580 1760 1840
240 1560 1740 1820
250 1540 1720 1790
Slab Thickness
(mm)
Stramit Condeck HP® decking thickness
(mm)
0.75 0.9 1.0
90 2440 2930 3090
100 2370 2840 3000
110 2300 2760 2920
120 2250 2690 2850
125 2220 2660 2820
130 2190 2630 2780
140 2140 2540 2720
150 2100 2460 2670
160 2050 2390 2610
170 1990 2330 2560
180 1940 2270 2470
190 1890 2210 2410
200 1840 2160 2350
210 1790 2110 2300
220 1710 2060 2250
230 1660 2010 2200
240 1620 1970 2150
250 1580 1930 2110
* Base Metal Thickness (BMT) is used for structural design analysis, whilst total coated thickness (TCT) values are approximate and given for reference only.
National Product & Services Catalogue 2011/2012
110Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Condeck Edgeforma
ProductCode
Size(mm)
Length (mm)
CEF100 100 Made to Order
CEF120 120 Made to Order
CEF125 125 Made to Order
CEF150 150 Made to Order
CEF180 180 Made to Order
CEF200 200 Made to Order
S338
Stramit Condeck HP®
ProductCode
Thickness(mm)
COND75 0.75
COND90 0.9
COND100 1
• Effective Width = 300 mm, Height = 55 mm• Suitable for use in both steel frame and concrete frame constructionIdeal for: Floor slab construction in residential, commercial and many industrial applications.
S196
FREE REOWORKS CD/DVD!The ultimate reinforcing essential that has everything you need to know about ‘REO’.
• Case Studies and Videos• Design Guides, Product Brochures and more…
Call into your nearest branch or visit www.reinforcing.com for a copy today!f t d !
!
Metal D
eckin
g
National Product & Services Catalogue 2011/2012
111Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Pu
nch
ing
Sh
earR
ein
force
me
nt
accessoriesconcrete&building
Lenton® Fortress (Erico®)
Studrail (Reid™)
Shearfi x (Ancon®)
• Custom-made to suit• Simple solution for punching shear
around columns• Eliminates column capitals• Minimises congestion• Lead time applies
Ideal for: Column/fl oor intersection and fl at slab construction.
• Shear reinforcement system that provides a simple solution to the complex problem of punching shear
• Installs quickly and easily after rebar placement
• Lead time applies
Ideal for: Column/fl oor intersection and fl at slab construction.
• Custom-made to suit• Provides additional reinforcement at column
locations and consists of double-headed studs welded to fl at rails
• Offers advantages over loose shear links which can be time-consuming to both design and install
• Ancon® provides free software to determine the optimum system design
• Lead time applies
Ideal for: Column/fl oor intersection and fl at slab construction.
S150
S8
S104
FREE REO Bar Gauge!• Confi rm key REBAR sizes for N10, N12, N16, N20,
N24, N28 and N32.
• Ideal for builders, architects, engineers and certifi ers.
Visit www.reinforcing.com to obtain yours today!
National Product & Services Catalogue 2011/2012
112Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Form
wo
rk
REINFORCING.TVOur latest videos and case studies are right here to view on our new YouTube™ website. It’s here you’ll discover why so many projects big and small use OneSteel Reinforcing products.
Visit us now on www.reinforcing.tv
Pecaform (Danley®)
ProductCode
Length(mm)
Width(mm)
PECA600 600 2250
PECA900 900 2250
PECA1200 1200 2400
PECA1500 1500 2400
PECA1800 1875 2400
PECA2400 2400 2400
accessoriesconcrete&building
• Alternative to conventional formwork• Flat sheet wire mesh with a heat-shrunk layer of polyethylene applied to both sides• Strong and lightweight• Can be pre-formed prior to delivery• Backfi ll after installation and pour concrete• Does not require stripping
S56
Giving our customers a voice!We’re always looking for feedback on how we can improve our products and services to you. That’s why we’ve developed REO RESPONSE. We value your opinions that go into helping us become a “Better and Different” reinforcing company.
Visit www.reinforcing.com or email [email protected]
National Product & Services Catalogue 2011/2012
113Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
accessoriesconcrete&building
Bolt Cutters
ProductCode
Length(mm)
BOLTC450 450
BOLTC600 600
BOLTC750 750
BOLTC900 900
BOLTC1050 1050
• Heat treated alloy jaws • Rated to cut HRC49• Fully adjustable with replaceable jaws
Trimming Knife
Product Code Description
KNIFEGRIP Rhino Tuff Total Grip Knife
KNIFEBLADE Black Rhino 10pk Heavy Duty Blades
• Retractable blade with Ergonomic grip• Quick blade change design with Magnetic Blade holder
Mesh Lifting Device
Product CodeLength (mm)
Weight(kg)
REOJACK 600 1.3
• Heavy duty
Ideal for: Lifting mesh
S273
S20
S208
Rebar Lifter
Product Code
REBARLIFTER
S265
• Resilient Durasoft® handle provides a soft feel, reduces fatigue and offers excellent durability• 815 mm reach minimises bending over
National Product & Services Catalogue 2011/2012
114Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
accessoriesconcrete&building
Marking
ProductCode
DescriptionNo. Per
Pack
MPAINT Survey Marking Spray can Paint –
MRKCRYN Fluro Yellow Spot Marking Paint 12
MRKPAINTSPOT Marking Crayon –
MRKPENCILGREEN Hanson Gr een H ard C arp’s P encils 72
MRKPENCILRED Hanson Red Medium Carp’s Pencils 72
CHALKLINEHD30 Heavy Duty Chalk Line Reel
CHALKRFL4R Hanson Red Chalk Refi ll –
CHALKRFL4W Hanson White Chalk Refi ll –
CHALKRFL8R Hanson Red Chalk Refi ll –
STRINGLINE50 Lime Builders Line 12
STRINGLINE100 String Line –
S109
Blades – Cured Concrete
ProductCode
Diameter(mm)
12LACU 300
14LACU 350
16LACU 400
• Laser Welded
S38
Blades – Green Concrete
Blades – Superior Diamond
ProductCode
Diameter(mm)
9LAGC 230
12LAGC 300
14LAGC 350
16LAGC 400
ProductCode
Diameter(mm)
DRB04MPS 105
DRB05MPS 125
DRB09MPS 230
DRB14MPS 350
• Laser Welded
• To cut all construction materials including steel
S16
S293
National Product & Services Catalogue 2011/2012
115Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
accessoriesconcrete&building
Straight Edge
ProductCode
Length (mm)
STEDGPA1500 1500
STEDGPA1800 1800
STEDGPA2700 2700
• Heavy duty aluminium structural alloy• Easy to grip extrusion design• Easy to clean powder-coated fi nish, fl uted profi le S274
Measuring Tape
ProductCode
Length(m)
TAPE8 8
TAPE10 10
TAPE30 30
TAPECON8 8
REELTAPE30 30
REELTAPE50 50
• Duragrip™ moulded rubber case• 25 mm blade• Triple riveted hook end S110
Barricade Warning Safety Tape
ProductCode
Width(mm)
Length(m)
Colour
SAFETAPE 75 75 Red & W hite
S221
Spirit Level
ProductCode
Length(mm)
SLEVEL08 800
SLEVEL10 1000
SLEVEL12 1200
SLEVEL20 2000
• Double milled working surfaces• Magnifi ed center vial• Vials set in epoxy resin
S188
National Product & Services Catalogue 2011/2012
116Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
accessoriesconcrete&building
Float – Aluminium
ProductCode
Size(mm)
FLOATBAL600 600
FLOATBAL900 900
FLOATBAL1200 1200
FLOATBAL1500 1500
FLOATBAL1800 1800
FLOATBM *
S296* Bull fl oat mechanism
Float – Magnesium
ProductCode
Size(mm)
FLOATM406 406
FLOATM508 508
FLOATM519 519
FLOATM520 520
S90
Float – Steel
Float – Wood
ProductCode
Size(mm)
FLOATS150380 380 x 150
FLOATS160210 210 x 160
FLOATS290100 290 x 100
ProductCode
Size(mm)
FLOATW50450 450 x 50
FLOATW112300 300 x 112
FLOATW112380 380 x 112
FLOATW112450 450 x 112
S91
S92
National Product & Services Catalogue 2011/2012
117Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
accessoriesconcrete&building
Trowel – Finishing
Trowel – Pointed Light
ProductCode
DescriptionSize(mm)
TRWPFIN100355A Pointed Fin Trowel Duragrip™ 355
TRWPFIN100356M Pointed Fin Trowel Soft Grip Handle 356
TRWPFIN100362M Pointed Fin Trowel Soft Grip Handle 362
TRWPFIN100400M Pointed Fin Trowel Soft Grip Handle 400
TRWPFIN100451M Pointed Fin Trowel Soft Grip Handle 451
ProductCode
Size(mm)
TRWPL115405 405 x 115
TRWPL115450 450 x 115
TRWPL115500 500 x 115
TRWPL115600 600 x 115
TRWPL120355 355 x 120
TRWPL120365 365 x 120
• Stainless steel
• Stainless steel• Duragrip™
Trowel – Machine Blades
ProductCode
DescriptionSize(mm)
TRWSBL40 Standard 1000
H1066 Combination 850
H1069FG Combination 1000
S250
Trowel – Machine
ProductCode
Diameter(mm)
TRWLMACH24 600
TRWLMACH34 865
TRWLMACH36 915
• Supplied fi tted with combination blades• Oil viewing glass
S210
S316
S211
Too
ls
National Product & Services Catalogue 2011/2012
118Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Trowel – Square
Trowel – Walking
ProductCode
Size(mm)
Type
TRWSQL115405 405 x 120 Light
TRWSH280120 280 x 120 Heavy
Product Code Description
TRWWLK Walking Trowel
• Stainless steel• Duragrip™
• Stainless steel
Trowel – Pool
Product Code DescriptionSize(mm)
TRWPOOLSS100300 Pool Trowel Flex Dg 300 x 100
TRWPOOLSS100356 Pool Trowel Flex Dg 356 x 100
TRWPOOLSS100457 Pool Trowel Flex Dg 457 x 100
TRWPOOLSS100356M Durasoft™ Gold Pool Trowel 254 x 76
S212
S213
S252
• Stainless steel
Bullnose Edger
Product CodeSize(mm)
T402 140 x 75
T403 140 x 75
T406 150 x 100
T408 140 x 80
T700 150 x 12.5
T706 105 x 10
• Stainless steel• Duragrip™
S81
Too
ls
National Product & Services Catalogue 2011/2012
119Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Lip Edger
ProductCode
Size(mm)
Lip(mm)
EDGER100180 180 x 100 19 x 19
EDGER130190 190 x 130 25 x 22
EDGER145215 215 x 145 32 x 16
• Stainless steel• Durasoft™ handle
S254
Screed
ProductCode
Length(mm)
SCREEDCH1200 1200
SCREEDCH1200V 1200
SCREEDCH1500 1500
SCREEDCH1500V 1500
SCREEDCH1800 1800
SCREEDCH1800V 1800
SCREEDCH2100 2100
SCREEDCH2100V 2100
SCREEDCH2400 2400
SCREEDCH2400V 2400
SCREEDCH2700 2700
SCREEDCH2700V 2700
SCREEDCH3000 3000
SCREEDCH3000V 3000
SCREEDCH3600 3600
SCREEDCH3600V 3600
• Heavy duty structural alloy• Ergo grip handle• Internal strength support bars• Cutting and pushing edge positioned for comfort• V – includes vial S184
Placer
Product Code
PLACERALUM
S264
• All aluminium
Too
ls
National Product & Services Catalogue 2011/2012
120Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Concrete Finishing Broom
ProductCode
Width(mm)
FINBROOM750 750
FINBROOM900 900
S268
Brick Rub
Product Code
RUBBRICKFLUTED
• Fluted
S266
Telescopic Handle
ProductCode
Length(mm)
HANDLETEL1200 1200 – 2400
HANDLETEL2700 2700 – 5000
• Ergo grip• H.D.P.E screw-lock fi tting• Fluted profi le• “T” section “twist top”
S198
Bracket
Product Code Description
BRACKETFORMWORK50 Adjustable Formwork Bracket
BRACKETTRWFRESNO Fresno Trowel Bracket Only
BRACKETTRWSTAND Walking Trowel Mechanical Stand Bracket
BRACKETTRWWALK Walking Trowel Bracket
• Suit walking trowel
S259
Too
ls
National Product & Services Catalogue 2011/2012
121Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Claw Hammer
Product Code
HAMMERC
• One piece drop forged steel, hardened and tempered
Sledge Hammer
ProductCode
Mass(kg)
SH5 5
SH7 7
• Double faced high quality drop forged steel head• Hickory handle fi tted with steel wedges
S95
S96
Board – Kneeling
Product Code
BOARDKNEEL
• Extra large grip handles• Firm foam pad for greater knee support
S258
Floor Squeegee Head
Product Code Length (mm)
FSH750HD 750
S335
Too
ls
National Product & Services Catalogue 2011/2012
122Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
accessoriesconcrete&building
Glove
Product Code Description
GLOVE Leather Gloves
• Beige cow hide• Premium quality and thickness• Wing thumb• Stitch free palm• Colour coded cuff for size identifi cation
S94
Liquid Hammer
ProductCode
Volume (L)
LH5L 5
LH20L 20
LH750 0.75
• Cleans concrete, cement and mortar safely, without any chipping or hammering• Designed specifi cally to remove build-up from concrete hauling, handling and
fi nishing equipmentS256
Safety Gumboot
ProductCode
Size
GUMBOOT07 7
GUMBOOT08 8
GUMBOOT09 9
GUMBOOT10 10
GUMBOOT11 11
GUMBOOT12 12
GUMBOOT13 13
• Steel toe safety cap S261
Shovel
Product Code Description
SMSHOVEL Square Mouth Shovel
SMSHOVELLONGHDL Square Mouth Shovel Long Handle
• Heavy duty steel• All steel• Moulded D grip handle• Tempered head
S187
Too
ls
National Product & Services Catalogue 2011/2012
123Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Rubber Bucket
ProductCode
Capacity(L)
BUCKETRUBBER15LT 15
• Flexible
S260
Spray pump
ProductCode
Volume(L)
SPRAYERSS10LT 10
• Stainless steel• For spraying curing compound and form release agents• Victor seals• Spare parts kit included
S267
Mixing Paddle
ProductCode
Length(mm)
MIXPADDLE10120600 600
MIXPADDLE890500 500
S263
accessoriesconcrete&building
Liquid Hammer Foamer
ProductCode
Volume (L)
LHFOAM1 1
LHFOAM5 5
LHFOAM8 8
• Cleans concrete, cement and mortar safely, without any chipping or hammering• Designed specifi cally to remove build-up from concrete hauling, handling and
fi nishing equipmentS257
accessoriesconcrete&building
Too
ls
Too
ls
National Product & Services Catalogue 2011/2012
124Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Too
ls
Ratchet Strap
ProductCode
SWL(kg)
RS500 500
RS750 750
RS1000 1000
RS1250 1250
RS2500 2500
• Load restraint• Less loading time• Faster turnaround time• Less damage to cargo or paintwork
S149
Building a Concrete Pool?Your guarantee of quality and performance is POOLSTEEL® from OneSteel Reinforcing.
• POOLSTEEL® is designed specially for concrete pools• POOLSTEEL® meets or exceeds standards AS/NZS 4671:2001. Steel reinforcing
materials & AS 2783 : 1992. Use of reinforced concrete for small swimming pools.
Call into your nearest branch or visit www.reinforcing.com
Ratchet Assembly
ProductCode
SWL(kg)
LBIND1500 1500
LBIND2500 2500
LBIND400 400
S299
• Load restraint• Less loading time• Faster turnaround time• Less damage to cargo or paintwork
Hopper Gun
Product Code Description
HOPPERGUNKIT Hopper Gun Maintenance Kit
HOPPERGUNSQ Hopper Gun Square Hopper
S262
accessoriesconcrete&building
National Product & Services Catalogue 2011/2012
125Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Th
esauru
s
Reinforced Concrete Thesaurus
Ast.fsy - Product of reinforcing steel area (Ast),mm2 and reinforcement yield stress (fsy), MPa - gives nominal tensile capacity of a reinforcing bar - units generally kilo Newtons (kN) by dividing product by 1000.Band Beam - Wide beam with width signifi cantly greater than depth, generally about 1200 to 2400 wide, used in buildings and carparks to minimise structural fl oor depth. Either reinforced or post-tensioned concrete depending on the span anddesign loads.Beam - A narrow member in a building structure predominantly acting in fl exure, generally horizontal.Bending Moment - Internal action effect due to bending, normally resolved about a principal axis at a cross-section of a structural member.Bond Strength - Normally expressed as the average ultimate stress that can develop at the interface between a bar and concrete when longitudinal slip occurs.500N CONTISTRETCH (CS) - 500 MPa low carbon bar : strength achieved by continuous stretching process.Centre Heave - Generally refers to deformation of a housing slab caused by the contraction of the expansive (clay) soils around the edge of a house - generally caused by drying out of the soils around house edge - opposite would be edge heave.Column - A narrow vertical member in a building as distinct from a wall, normally under combined compression and bending.Compression - An internal state of compressive stress prependicular to a cross-section.Compression Member - A structural member predominantlyin compression.Cover - Minimum clear distance from an exposed concrete surface to closest bar - for durability design not just to main bars but to closest bar which is generally a stirrup or a tie. Insuffi cient cover is a major cause of reinforcement corrosion in concrete.Creep - Property of concrete (dependant upon its constituents and internal state of stress) where a concrete element will deform due to sustained stress during its life. This is very important in the calculation of long-term defl ections, and in prestressed/post-tensioned concrete design as an element can lose a signifi cant proportion of its prestress.Decking - Profi led steel sheeting or structural steel decking used as a dual formwork, reinforcement system.Defl ection - Normally the maximum vertical or horizonal movement of a structural member or a building frame, measured relative to the member supports or between adjacent fl oor levels in the case of sway.Design Load - The combination of factored loads (e.g. imposed, wind etc.) for the applicable limit state (e.g. serviceability, stability, strength, fi re, etc.), assumed to be applied to a structural member or building.Detailing - Process whereby an engineer’s sketch is transformed into an engineering drawing - generally performed by a draftsman - this is then used by the reinforcing scheduler.Ductility (Reinforcement) - See Uniform Strain or Elongation.Ductility (Member) - Ability of a member to deform under load - relevant to moment redistribution and especially important for seismic design of structures.Edge Beam - The beam around a fl oor perimeter, generallycast integrally with a concrete slab, which may form part of the beam fl ange.Edge Heave - Generally refers to deformation of a housing slab caused by swelling of the expansive (clay) soils around the edge of a house - generally caused by excessive moisture around house edge - opposite would be centre heave.Edge Rebate - Notch cast in corner of beam - common in edge beam footing of brick veneer house to allow for brickwork to start below level of timber framing - done for aesthetic and waterproofi ng reasons.Elastic Design - When the design action effects associated with a redundant member of a building are computed assuming elastic behaviour of the steel and concrete, which affects the relative stiffnesses.Embedment - The length of reinforcement measured past a critical section that is bonded to the concrete.
Finite Element Analysis - A sophisticated form of numerical analysis traditionally used to model complex components or members acted on by different actions including temperature and increasingly being used to model whole 3-D concrete structures.Flexural Tensile Strength - The maximum tensile stress reached in the extreme tensile fi bre before the concrete cracks, normally measured in a small concrete beam test.In Situ - In the actual position at the job site.Lapping of Mesh - The over-lapping of two or more adjacent sheets of mesh which is necessary in order to achieve continuity of the reinforcement.Ligatures - General term for stirrups or ties - term more used in reinforcing manufacture than in design. Superseded by the general term “fi tments” in AS 3600 : 2009.Lightweight Concrete - AS 3600 : 2009 defi nes lightweight concrete as “Concrete having a saturated surface-dry density in the range 1800 - 2100 kg/m3“.Lintel - Beam type element generally supporting masonryover an opening. Can be concrete but more often than not is a steel angle.Load Factor - Factor by which a load is increased when computing design loads for the applicable limit state, e.g. serviceability, stability, strength, fi re, etc).500N MICROALLOY (MA) - 500 MPa bar : strength achieved by additions of alloying elements.Modulus of Elasticity - Slope of elastic portion of stress/strain curve for a particular material, e.g. steel or concrete (same as Young’s modulus) - symbol generally E.Moment Redistribution - In design, adjustment of the bending moment diagram at the strength limit state relative to the elastically-calculated design bending moment diagram and the actual distribution of design strength in bending, while maintaining equilibrium with the design loads.Negative Bending Moment - A bending moment that causes a tensile change in stress on the nearer face of a member, e.g. on the topside of a slab loaded from above.Negative Moment Region - Area of negative bending moment.Negative Reinforcement - Main tensile reinforcement in a negative moment region.Normal-Weight Concrete - AS 3600 : 2009 defi nes normal-weight concrete as having a saturated surface-dry density in the range 2100 to 2800 kg/m3. Concrete density is usually assumed to be 2400 kg/m3.Perimeter Edge Footing - Edge beam around outside edge of house - may or may not be cast integrally with slab.Piles - Elements used to support a structure in poor soil/foundation conditions - based on the pile bearing on a good stratum at some distance below the structure to be supported - typically are steel, precast or cast in situ concrete - steel and precast used for long lengths and would be generally end bearing piles onto rock - cast in situ used for shorter length, and combination of end bearing onto a soil plus skin friction on the surrounding soil.Positive Bending Moment - A bending moment that causes a tensile change in stress on the opposite face of a member. e.g. on the underside of a slab loaded from above.Positive Reinforcement - Main tensile reinforcement in a positive moment region of a horizontal member of a building. Post-Tensioned Concrete - Concrete elements where the concrete is poured with hollow ducts containing steel strand or bar subsequently stressed and normally grouted for bond. Extensively used in bridges, and beams and slabs of high-rise buildings. Strand has the ability to be “draped” (held towards the top of a member at the ends and towards the bottom of the member at mid-span) so as to induce an uplift force in the member. Strand is more suitable than bar where long lengths are required.Precast Concrete - Concrete elements that are cast in the factory or yard and lifted into position on site. Precast prestressed or post-tensioned beams for bridge construction are popular in Australia.
National Product & Services Catalogue 2011/2012
126Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Th
esauru
s
Reinforced Concrete Thesaurus
Prestressed Concrete - Generic term for any beam, slab or column containing stressed strands or bars - but normally refers to a concrete element cast around previously placed and stressed strand - just about all prestressed concrete is precast but not vice versa - main examples would be hollowcore planks - strands are stressed in long lengths, concrete poured, cured and set then strands cut - long members cut to required lengths - not to be confused with Post-Tensioned Concrete.Raft - Usually applied to slabs where the whole area of the slab is considered to act as a “raft” which relies on the underlying ground for support.Reinforcement Surface Condition - The state of the surface on the exterior of reinforcing bars. Note: hot-rolled bars normally have a thin layer of mill scale on the surface. Rust on the surface of reinforcement is not normally deleterious to the bond developed between the steel and concrete.Shear Reinforcement - The reinforcement which caters for vertical or transverse shear forces in the member.Shrinkage - Shortening of concrete due to autogenous shrinkage or drying shrinkage, which may be restrained in the direction of embedded steel, e.g. rebar, or by adjacent members or supports.Slump - Simple on-site measure of consistency (and possibly workability) of concrete in the as-mixed fl uid state - involves a standard test using a metal cone.Slipform - Form of construction used for building service cores, towers, etc - involves formwork moving continuously as concrete and reinforcement are placed.Spacing of Reinforcement - The distance between adjacent reinforcing bars, normally measured centre-to-centre.Stack Cast - Flat slabs which are cast alternately, one on top of the other.Starter Bars - Short reinforcing bars which are cast in or screwed into inserts at a joint to provide continuity of bending and shear strength across the joint.Stiffness - Under fl exural conditions, it is a function of EI/L - modulus of elasticity (normally of the concrete) (E) times effective second moment of area (l) of the composite uncracked and cracked sections divided by the length or span (L) of the element.Stirrups - Same as ligatures. Generally provided in a beam as shear and torsional reinforcement (determined from engineering design) and hold the main bars in position. Superseded by the general term "fi tments" in AS 3600 : 2009.Strain - Ratio of elongation to original length. There are no units to strain.Strain Localisation - Uneven distribution of tensile strain in longitudinal steel reinforcement at fl exural cracks due to bond transfer.
Strength - Used synonymously with capacity in Australian Standards, and can relate to axial force, shear force, bending moment, torsion, etc.Stress - Local internal pressure that can arise due to action effects, restraint, etc. Units MPa or kPa.Strip Footing - Beam around the perimeter of a house, generally supporting a continuous line of masonry - generally not connected to the fl oor slab.TEMPCORE® (TC) - Quenched and self-tempered straight length Grade 500 reinforcing bar.Tensile Development Length - A term in AS 3600 referring to the length of embedment of a straight reinforcing bar into concrete required to develop the yield stress of the reinforcement in axial tension. Related to bond stress(or strength).Tensile Strength - The maximum or ultimate tensile stress that can develop in a reinforcing bar, at which necking is initiated and fracture ensues.Ties - Used in columns for various purposes including to prevent main bars from buckling at ultimate load should the cover spall - generally more closely spaced than stirrups in beams. See AS 3600 : 2009 for new rules concerning core-confi nement for concrete >50 MPa and also new type of internal fi tment with one leg. Superseded by the general term "fi tments" in AS 3600 : 2009.Tilt Up - Process of casting fl at wall panels on the concrete fl oor on site and then lifting and securing in place using amobile crane.Torsion - Twisting of a building element (beam, slab, etc.) requiring additional reinforcement such as closed fi tments in beams or additional corner bars in slabs. Ultimate Strength Design - Design using the ultimate strength of materials to calculate the design strength of critical cross-sections or regions of concrete members which must exceed the ultimate design action effects.Uniform Strain or Elongation - Axial strain of steel bar up to the point where the stress/strain curve starts to turn down (at the point of maximum load) - symbolised as Agt or εu and expressed as %.Yield Strength - Alternative term for Yield Stress used inAS 3600.Yield Stress - Stress at which steel yields, the defi nition of which depends on the shape of the stress-strain curve. In design, a lower characteristic value is used to defi ne the strength grade of the steel.Young’s Modulus - Slope of elastic portion of stress/strain curve (same as Modulus of Elasticity) - Symbol generally E for steel or concrete.
Giving our customers a voice!We’re always looking for feedback on how we can improve our products and services to you. That’s why we’ve developed REO RESPONSE. We value your opinions that go into helping us become a “Better and Different” reinforcing company.
Visit www.reinforcing.com or email [email protected]
National Product & Services Catalogue 2011/2012
127Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Term
s & C
on
ditio
ns
Terms & Conditions of Contract for Sale of Goods and Provision of Works for all Sales as at 25 May 2009
These Terms and Conditions replace and supersede all previous OneSteel Reinforcing Terms and Conditions issued prior to 25 May 2009. OneSteel Reinforcing Pty Limited ABN 22 004 148 289 trading as OneSteel Reinforcing.
GENERALAll Goods are supplied, and Works provided, to Purchasers on these Terms and Conditions. No person employed by or acting otherwise as agent of OneSteel Reinforcing or purporting to do so has authority to accept orders and supply Goods or provide Works on any other terms and conditions or to vary these Terms and Conditions in any way whatsoever unless the person has been authorised to do so by OneSteel Reinforcing.1. DEFINITIONS1.1 In these Terms and Conditions: (a) Contract means the contract created in accordance with
clause 4; (b) Delivery Offer means the delivery offer, which sets out
the terms and conditions on which OneSteel Reinforcing delivers Goods, and which is available on request from OneSteel Reinforcing locations;
(c) Goods means goods, products and materials (and any related Works) supplied by OneSteel Reinforcing under the Contract;
(d) OneSteel Reinforcing means OneSteel Reinforcing Pty Limited ABN 22 004 148 289;
(e) Purchaser means the person, fi rm or company that agrees to purchase the Goods or Works;
(f) Quotation means a quote for Goods and/or Works issued to the Purchaser by OneSteel Reinforcing;
(g) Working Documents means architectural drawings, structural drawings, construction drawings, specifi cations and reinforcement schedules or other documents together with any variation or site instruction;
(h) Works means any labour performed and/or services provided by OneSteel Reinforcing under the Contract (whether or not a fee is charged for such labour and/or services), including but not limited to estimating, scheduling, re-scheduling, detailing, re-detailing, design, re-design, prefabrication, project management, steel fi xing and administrative services; and
(i) Writing means hard copy, signed by a person authorised in writing, or electronic, transmitted by a person authorised in writing.
2. QUOTATIONS AND PRICING2.1 OneSteel Reinforcing may at any time and at its absolute
discretion accept or reject in whole or in part any request from the Purchaser for a Quotation.
2.2 A Quotation is valid for a period of 30 days from the date of the Quotation, unless OneSteel Reinforcing specifi es otherwise in writing. Any Quotation may be withdrawn earlier by notice from OneSteel Reinforcing at its absolute discretion.
2.3 OneSteel Reinforcing reserves the right to withdraw, change or re-issue a Quotation if supply of the quoted Goods and/or Works does not start within 30 days after the date of the Quotation.
2.4 OneSteel Reinforcing reserves the right to change the pricing in the Contract for the whole or any part of the Contract if:
(a) Supply of the quoted Goods and/or Works does not start within 30 days after the date of the written order acknowledgement;
(b) Supply under the Contract is stopped or suspended for more than 30 days; or
(c) Supply under the Contract is changed in any way before, during or after commencement of supply, including but not limited to re-design of the project, the start date of supply, the completion date of supply and the agreed rate of supply of the Goods and/or Works; or
(d) Supply under the Contract has not been completed within twelve months of the date of the Quotation.
2.5 The price quoted is subject to the Purchaser ordering the whole quantity of the Goods and Works described in the Quotation. If the Purchaser orders less than the whole quantity of Goods and Works specifi ed in the Quotation, then OneSteel Reinforcing reserves the right to revise the pricing for such Goods and/or Works.
2.6 Unless otherwise agreed in writing, the price charged for the Goods and Works is the price applying at the date of despatch. Any price indications or price lists are subject to alteration in accordance with these Terms and Conditions.
2.7 All amounts shown in OneSteel Reinforcing quotations and invoices may be rounded up or down to the nearest multiple of 10 cents.
3. ESCALATION AND PRICE VARIATION3.1 In addition to its rights in clause 2 or any rights under the
Contract. OneSteel Reinforcing may increase or decrease the Contract price of Goods and/or Works during the term of the Contract where it incurs an increase or decrease in its costs (including any transaction or other taxes) of supplying the Goods and/or Works.
4. THE CONTRACT4.1 An order or offer to purchase Goods and/or Works can be
made by the Purchaser in writing or verbally.4.2 An order or offer made by the Purchaser does not constitute
a binding contract until OneSteel Reinforcing has accepted such order or offer in accordance with these Terms and Conditions.
4.3 An order or offer made by a Purchaser is accepted by OneSteel Reinforcing only if OneSteel Reinforcing:
(a) formally accepts the order by written acknowledgement; or
(b) delivers the ordered Goods and/or Works described in the order or offer, whichever occurs fi rst.
4.4 OneSteel Reinforcing may at any time and at its absolute discretion accept or reject part or all of any order or offer made by the Purchaser.
4.5 The Purchaser is not entitled to cancel or change part or all of any order accepted by OneSteel Reinforcing, unless OneSteel Reinforcing consents in writing.
4.6 The Contract, when created, is wholly documented by (in descending order of precedence):
(a) Any specifi c terms agreed by the parties in accordance with clause 6;
(b) The Quotation (if applicable); (c) These Terms and Conditions; (d) The relevant Working Documents; (e) The applicable Delivery Offer; (f) The credit terms applying to the Purchaser
(if applicable).4.7 Previous dealings between OneSteel Reinforcing and the
Purchaser have no effect on the Contract.4.8 Trade custom and/or trade usage is superseded by the
Contract and is not applicable in interpretation of the Contract.
National Product & Services Catalogue 2011/2012
128Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Term
s & C
on
ditio
ns
4.9 The Contract constitutes the entire agreement between OneSteel Reinforcing and the Purchaser with respect to the Goods supplied or Works provided under the Contract and all prior negotiations, proposals and correspondence are superseded by that Contract.
4.10 Unless agreed otherwise in writing, OneSteel Reinforcing may, by written notice, terminate the Contract 12 months after the date of fi rst delivery of the Goods and/or Works.
5. QUANTITIES5.1 Generally, the steel mass of steel reinforcing Goods supplied
will be within the tolerances permitted by Australian Standards AS/NZS4671, AS3600, AS5100, AS2870, AS2327 and AS/NZS1100.
5.2 When calculating the mass of the steel reinforcing Goods, OneSteel Reinforcing will make calculations on a per metre basis in accordance with AS/NZS4671. OneSteel Reinforcing will add a margin of 2.5% onto the calculated nominal mass to cover rolling variations and other costs.
5.3 Calculations with respect to the length of steel reinforcing will be made in accordance with AS/NZS1100 Part 501.
5.4 Unless the Quotation states that the price is a lump sum, the price in the Quotation is based on estimated quantities of Goods and Works as applicable and, unless the price is a lump sum, the Purchaser is liable to pay for the actual quantity of Goods and the quantum of the Works necessary for OneSteel Reinforcing to perform its obligations. Other than with a lump sum price, any adjustment in the actual price compared to the quoted price will refl ect the increase or decrease of the Goods and/or Works actually supplied or provided.
6. VARIATIONS6.1 No purported variation of the Contract is effective unless it
is in writing.7. WARRANTIES AND LIMITATION OF LIABILITY7.1 To the extent permitted by law, all implied conditions
and warranties are excluded. To the extent that any implied conditions and warranties cannot be excluded, the Purchaser’s sole and exclusive remedy for any loss or damage (whether direct, indirect, liquidated, special or consequential and including loss or damage arising as a result of death or personal injury to the Purchaser or any other person) however arising (including by reason of any breach of contract, condition or warranty in the Contract (whether express or implied)) is, where permitted at law, limited to any one of the following, as determined by OneSteel Reinforcing:
(a) in the case of any Goods supplied by OneSteel Reinforcing pursuant to the Contract:
(i) the replacement of the relevant Goods or supply of equivalent Goods; or
(ii) the repair of the Goods; or (iii) after prior agreement between OneSteel Reinforcing
and the Purchaser, payment of the cost of replacing or repairing or having the Goods replaced or repaired; or
(iv) reimbursement of some or all amounts paid by the Purchaser in respect of the Goods.
(b) In the case of any Works supplied by OneSteel Reinforcing pursuant to the Contract:
(i) the provision of the Works again; or (ii) payment of the cost of having the relevant Works
provided again; or (iii) reimbursement of some or all amounts paid by the
Purchaser in respect of the Works.7.2 Goods which are not manufactured by OneSteel Reinforcing
are subject solely to the warranties (if any) specifi ed by the manufacturers or the third party suppliers to OneSteel Reinforcing, and the Purchaser acknowledges that, to the extent permitted by law. OneSteel Reinforcing gives no warranties beyond such manufacturers’ or suppliers’ warranties.
7.3 The Purchaser acknowledges that OneSteel Reinforcing makes no representations or warranties as to the fi tness or suitability for any purpose of any of the Goods or Works described in the Quotation or Contract.
7.4 Except as required by law, OneSteel Reinforcing is not obliged to accept Goods returned for any reason.
7.5 OneSteel Reinforcing is not liable for the design, lifting and/or positioning of any pre-fabricated elements at the Purchaser’s site, including but not limited to manually tied and/or welded components.
7.6 Subject to clause 7.1 and Part VA of the Trade Practices Act 1974 (Cth). OneSteel Reinforcing is not liable to the Purchaser for any loss or damage, whether direct, indirect, liquidated, special or consequential and including loss or damage arising as a result of death or personal injury, however caused (including negligent or reckless conduct or omission) which the Purchaser or any other person may suffer or incur and which may, without limiting the generality of the foregoing, arise directly or indirectly in respect of the Goods and/or Works, any defects in the Goods and/or Works or in respect of any failure or omission by OneSteel Reinforcing or any of its offi cers, agents or employees to comply with the Contract or any obligation imposed by law.
8. INVOICING AND PAYMENT8.1 Where the Purchaser has an established and approved
commercial credit account with OneSteel Reinforcing or with any of OneSteel Reinforcing’s related bodies corporate (within the meaning of the Corporations Act 2001), the Purchaser must comply with the terms and conditions of that commercial credit account. OneSteel Reinforcing reserves the right to charge an administration fee as determined from time to time to cover credit card merchant fees and OneSteel Reinforcing’s associated overhead charges.
8.2 If the Purchaser has a commercial credit account with OneSteel Reinforcing then, unless otherwise agreed in writing:
(a) OneSteel Reinforcing may issue invoices for Goods and Works either:
(i) on despatch of such Goods and/or Works; or (ii) when such Goods and/or Works are delivered; or (iii) when such Goods and/or Works are deemed
delivered in accordance with clause 12; and (b) the Purchaser must pay all invoices in full and without
set-off by the last business day of the month following the month in which the invoice was issued.
8.3 If the Purchaser does not have a commercial credit account with OneSteel Reinforcing then the Purchaser must pay OneSteel Reinforcing for the Goods and/or Works at the time it places an order for such Goods and/or Works with OneSteel Reinforcing.
8.4 OneSteel Reinforcing reserves the right to charge additional administration fees (such as commercial credit account keeping fees) as determined by OneSteel Reinforcing from time to time.
8.5 If OneSteel Reinforcing delivers only part of an order, then it may invoice, and the Purchaser must pay for, that part of the Goods and/or Works delivered, unless otherwise agreed in writing between the parties.
8.6 The Purchaser is not entitled to, and must not demand or hold, any sum on account of retention for completion of the Contract to be performed by OneSteel Reinforcing or against any pending or unsecured claim against OneSteel Reinforcing. If the Purchaser withholds any money as retention money. OneSteel Reinforcing reserves the right to withhold further supply under the Contract or any other contract between OneSteel Reinforcing and the Purchaser.
9. DEFAULT AND TERMINATION9.1 If: (a) the Purchaser refuses or fails to pay any amounts when
due under the Contract; or (b) the Purchaser defaults in performing any of its
obligations under the Contract; or
National Product & Services Catalogue 2011/2012
129Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Term
s & C
on
ditio
ns
(c) in OneSteel Reinforcing’s reasonable opinion, the Purchaser is insolvent or suffering from fi nancial issues including but not limited to, if the Purchaser is an individual, the Purchaser commits an act of bankruptcy, or, if the Purchaser is a company, it becomes an externally-administered body corporate within the meaning of section 9 of the Corporations Act 2001 (Cth) or passes a resolution to wind up; or
(d) the Purchaser is in breach of contract, then, in addition to and without prejudice to any other rights it has by law. OneSteel Reinforcing:
(e) is entitled to treat the whole of the Contract as repudiated;
(f) may refuse to supply the Goods or provide the Works to the Purchaser;
(g) is entitled to treat any other contract between OneSteel Reinforcing and the Purchaser as repudiated; and
(h) is entitled to claim return of any Goods in the possession of the Purchaser where title has not passed to the Purchaser.
9.2 The Purchaser is not entitled to terminate, suspend or cancel part or all of the Contract for any reason (including for convenience) except if OneSteel has failed to remedy its breach of the Contract within a reasonable period after the Purchaser gives it written notice of such breach, If the Purchaser purports to wrongly terminate or rescind part or all of the Contract or refuses to take delivery of any Goods delivered in accordance with the Contract. OneSteel may recover from the Purchaser the total amount of the order placed on OneSteel, less any amounts already paid by the Purchaser.
10. MONEY OWING10.1 A statement in writing as to any amount owing under the
Contract by the Purchaser on the date mentioned in such statement is prima facie evidence that such amount is owing.
11. TAX11.1 Unless otherwise agreed in writing or required by law,
all amounts stated in a Quotation or payable under the Contract are calculated or expressed exclusive of GST. If GST is payable, the amount of GST will be specifi ed separately in the relevant documentation.
11.2 If GST is or becomes payable by a supplier in relation to a supply under the Contract, the recipient of that supply must pay to that supplier an amount equal to the GST. An amount payable under this clause 11 must be paid:
(a) at the same time as the payment of the amount in respect of that supply is due; and
(b) in addition to the amount payable under the Contract.11.3 The Purchaser is not obliged to pay any GST unless a valid
tax invoice has been issued.11.4 If the Purchaser fails to pay such GST when due. OneSteel
Reinforcing may recover it from the Purchaser as a debt under the Contract.
11.5 Any party that becomes aware of the occurrence of any adjustment event in connection with the Contract must notify the other party as soon as possible. The parties must then take whatever steps are necessary and make whatever adjustments are required to ensure that any additional GST, or refund of GST, on that supply is paid no later than 20 business days after the parties fi rst become aware of the adjustment event.
11.6 For the purposes of this clause 11. terms used in this clause 11 which are defi ned in the A New Tax System (Goods and Services Tax) Act 1999 (Cth) have the meaning given to them in that Act.
12. DELIVERY12.1 Delivery of Goods will be in accordance with the applicable
Delivery Offer. It is the obligation of the Purchaser to ensure that it is familiar with and observes the Delivery Offer. OneSteel Reinforcing may deliver the Goods in any number of installments.
12.2 If OneSteel Reinforcing quotes the price as “ex works”, the Purchaser must collect the Goods from OneSteel Reinforcing’s nominated premises at the time notifi ed by OneSteel Reinforcing to the Purchaser.
12.3 If OneSteel Reinforcing quotes the price as “delivered”, it will deliver the Goods to the Purchaser’s nominated site, and the Purchaser must:
(a) nominate the site for delivery in writing to OneSteel Reinforcing prior to the delivery;
(b) ensure that an area is available which complies with all applicable occupational health, safety and welfare legislation; and
(c) ensure that its representative is available at the time of delivery to acknowledge delivery by signing a delivery receipt.
12.4 If OneSteel Reinforcing’s obligation is to deliver the Goods, and the Purchaser or its representative is not in attendance when the Goods are delivered at the Purchaser’s nominated site. OneSteel Reinforcing reserves the right to unload the Goods.
12.5 Where the Purchaser does not accept delivery of Goods or allow performance of the Works which it has ordered from OneSteel Reinforcing when such Goods and/or Works are ready for delivery or performance, the Purchaser is liable for any additional charges that OneSteel Reinforcing may incur for storage and/or double-handling, at OneSteel Reinforcing’s then current rates.
12.6 If Goods are to be despatched “ex works” they are deemed delivered at the premises of OneSteel Reinforcing when OneSteel Reinforcing notifi es the Purchaser that the Goods are ready for collection.
12.7 If Goods are to be delivered by OneSteel Reinforcing, they are deemed to be delivered:
(a) if the parties agree that the Purchaser or the Purchaser’s representative will unload the Goods, when OneSteel Reinforcing delivers the Goods on a truck to a site adjacent to the Purchaser’s nominated site; or
(b) when OneSteel Reinforcing has unloaded the Goods at or adjacent to the Purchaser’s site to a ground level, fl at area.
13. RISK13.1 Risk in the Goods passes to the Purchaser on: (a) delivery of the Goods to the Purchaser; or (b) deemed delivery of the Goods to the Purchaser in
accordance with clause 12; or (c) collection of the Goods by the Purchaser, whichever
occurs fi rst.13.2 OneSteel Reinforcing will not be responsible for any claim
from the Purchaser arising from or in any way relating to the unloading of the Goods.
13.3 If OneSteel Reinforcing’s offi cers, agents or employees enter upon any property at the actual or implied request of the Purchaser. OneSteel Reinforcing accepts no responsibility for any damage suffered by the Purchaser or the Purchaser’s offi cers, agents or employees or to the Purchaser’s property as a result of or in connection with OneSteel Reinforcing’s offi cers, agents or employees entering such property.
13.4 If a vehicle engaged in the delivery of Goods to the Purchaser’s property is disabled or damaged due to the condition of the Purchaser’s property, the Purchaser is liable for the cost of salvage of or repair to the vehicle. The Purchaser indemnifi es OneSteel Reinforcing and keeps OneSteel Reinforcing indemnifi ed against any loss or damage suffered by OneSteel Reinforcing or as a consequence of OneSteel Reinforcing becoming liable to any third party directly or indirectly as a result of OneSteel Reinforcing’s offi cers, agents or employees entering any property at the actual or the implied request of the Purchaser or unloading the Goods.
Term
s & C
on
ditio
ns
National Product & Services Catalogue 2011/2012
130Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
14. LEGAL TITLE AND RELATED MATTERS14.1 The legal and equitable title to the Goods will be transferred
from OneSteel Reinforcing to the Purchaser only when the Purchaser has met and paid all that is owed to OneSteel Reinforcing on any account whatsoever.
14.2 The Purchaser acknowledges that until the Purchaser has met and paid all that is owed to OneSteel Reinforcing on any account whatsoever, the Purchaser holds the Goods as bailee for OneSteel Reinforcing and that a fi duciary relationship exists between the Purchaser and OneSteel Reinforcing.
14.3 Until OneSteel Reinforcing receives full payment of all monies due to it from the Purchaser, the Purchaser must keep the Goods separate and in good condition as a fi duciary of OneSteel Reinforcing, clearly showing OneSteel Reinforcing’s ownership of the Goods and must keep books recording OneSteel Reinforcing’s ownership of the Goods and the Purchaser’s sale or otherwise of them in accordance with clauses 14.5 and 14.6. The Purchaser, if required, must deliver up the Goods to OneSteel Reinforcing.
14.4 If the Purchaser defaults in addition to OneSteel Reinforcing’s rights under the Contract. OneSteel Reinforcing may take possession of the Goods wherever the Goods are located and the Purchaser agrees that representatives of OneSteel Reinforcing may enter upon the Purchaser’s premises for that purpose.
14.5 Despite clause 14.1 but subject to clause 15, the Purchaser may sell as fi duciary agent for OneSteel Reinforcing the Goods to a third party in the normal course of the Purchaser’s business provided that where the Purchaser is paid by that third party, the Purchaser holds the proceeds of sale, to the extent of the amount owing by the Purchaser to OneSteel Reinforcing at the time of receipt of such proceeds, on trust for OneSteel Reinforcing. The Purchaser must keep those proceeds separate on trust for OneSteel Reinforcing and not mix those proceeds with any other monies.
14.6 If the Purchaser uses the Goods in some manufacturing or construction process of its own or some third party, then the Purchaser holds such part of the proceeds of such manufacturing or construction process as related to the Goods on trust for OneSteel Reinforcing. Such part is deemed to equal in dollar terms the amount owing by the Purchaser to OneSteel Reinforcing at the time of the receipt of such proceeds. The Purchaser must keep that part of the proceeds separate on trust for OneSteel Reinforcing and not mix those proceeds with any other monies, Not with standing the above, the Purchaser is still required to pay OneSteel Reinforcing for Goods already delivered and for Goods manufactured or ordered to specifi cation and not yet delivered.
15. RESALE15.1 The Purchaser is not permitted to re-sell, re-supply, transfer
or assign any Goods to any other party without OneSteel Reinforcing’s prior written consent, which OneSteel Reinforcing may withhold at its absolute discretion.
16. FORCE MAJEURE16.1 If OneSteel Reinforcing is prevented (directly or indirectly)
from supplying the Goods or providing the Works or any part thereof by reason of acts of God, strikes, lockouts, trade disputes, fi re, fl oods, breakdowns, delay in the manufacture of the Goods for any reason whatsoever, interruption of transport, government action, non-delivery of raw material or products, refusal or failure of OneSteel Reinforcing’s own suppliers to deliver to OneSteel Reinforcing any Goods or components of Goods, or any cause whatsoever (whether or not of a like nature to those specifi ed above) outside its control. OneSteel Reinforcing is under no liability whatsoever to the Purchaser and is entitled, at its discretion, to give notice to the Purchaser, either to cancel the Contract or to extend the time for its performance.
17. SHORTAGES, DEFECTS AND INACCURACIES 17.1 The Purchaser hereby agrees to check all Goods received
immediately upon unloading at their destination and all
Works immediately upon completion. No claim by the Purchaser for shortages or improper or defective or damaged Goods, or defective or improper Works, will be recognised by OneSteel Reinforcing unless notifi ed to OneSteel Reinforcing within forty-eight (48) hours of delivery or performance.
17.2 OneSteel Reinforcing will endeavour to rectify inaccuracies or short supply within forty-eight (48) hours of notifi cation, but will not be responsible for any loss or damage (including consequential loss) however caused arising out of or resulting from such inaccuracies or short supply.
17.3 If, due to any cause whatsoever. OneSteel Reinforcing is unable to supply any part of the Contract by the nominated delivery date or at all, it is entitled, at its option:
(a) to supply to the Purchaser similar Goods and/or Works which in the opinion of OneSteel Reinforcing are an appropriate substitute without prior reference to the Purchaser; or
(b) not to supply part or all of the Goods and/or Works; or (c) delay supply of part or all of the Goods and/or Works,
and OneSteel Reinforcing is not liable to the Purchaser for any failure or delay in supplying part or all of the Contract.
18. DISPUTE RESOLUTION18.1 If there is a dispute or disagreement between OneSteel
Reinforcing and the Purchaser arising in any way from or in relation to the Contract, then OneSteel Reinforcing and the Purchaser must use all reasonable endeavours and reasonably appropriate alternative dispute resolution procedures as soon as possible before resorting to litigation.
18.2 Nothing in this clause 3 prevents a party seeking urgent interlocutory relief from a court or requires that party to participate in informal resolution processes for longer than 30 days after a dispute has arisen.
19. CONFIDENTIALITY19.1 OneSteel Reinforcing and the Purchaser agree that a
Contract and any other information furnished by one party to the other pursuant to the Contract is and remains confi dential between the parties and the parties must not disclose the same, or permit or cause the same to be disclosed, either directly or indirectly, to any third party unless:
(a) prior approval in writing has been obtained from the other party;
(b) disclosure is required by law or; (c) the information is in the public domain prior to the
disclosure by the party.19.2 The expression “any third party” does not include the
fi nancial or legal advisers of a party or a related body corporate of a party.
20. EXTRAS20.1 Unless noted in the Quotation, the price quoted does not
include items such as: tie wire; bar chairs; threading and/or screwing; saw cutting; mechanical splices; welding of any nature; blacksmithing; press work; butt welding; assembly of goods; supply and location of lifting hooks, slings and cradles; supply of bars exceeding lengths of ten metres or exceeding diameter of 36mm; delivery of oversized loads or provision of vehicle escorts; brickwork reinforcing and holding down bolts; galvanizing; on-site scheduling; product containers; steel fi xing; on-site accommodation; provision of traffi c control; or such other items as specifi ed in the Quotation as being excluded.
Term
s & C
on
ditio
ns
National Product & Services Catalogue 2011/2012
131Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Term
s & C
on
ditio
ns
20.2 Where the Quotation states that prefabricated elements, such as reinforcing elements or cages, BAMTEC®, ROMTECH®, TRUSSDEK®, engineered manufactured items and steel fi xing are included, unless expressly stated otherwise the quoted price does not include the cost of or associated with lifting or lowering to position on site; site scaffolding; supply and welding of lifting points; or site welding.
20.3 The Purchaser is responsible for the design and location of any required lifting and/or support items at the Purchaser’s site.
21. WORKS21.8 Unless expressly stated in a Quotation, the prices, fees or
rates quoted do not include any Works. 21.9 OneSteel Reinforcing reserves the right to charge for any or
all Works.21.10 Where OneSteel has agreed to provide Works, the Purchaser
must pay OneSteel Reinforcing’s fees for such Works, if applicable, when such Works have been performed.
21.11 OneSteel Reinforcing will use all reasonable endeavours to perform Works in a competent, proper and workmanlike manner and exercising a reasonable standard of skill and diligence, but is not liable for any inaccuracy, error or omission arising from performance of the Works.
21.12 Where a Quotation expressly includes steelfi xing and/or prefabrication as part of the Works, the Purchaser must give OneSteel suffi cient notice to arrange such steelfi xing and/or prefabrication and meet associated health and safety requirements.
22. WORKING DOCUMENTS22.1 OneSteel Reinforcing accepts no responsibility for the
correctness of Working Documents prepared by the Purchaser or a third party.
22.2 Unless otherwise agreed, the Purchaser must deliver all Working Documents without charge to OneSteel Reinforcing prior to commencement of the Works.
22.3 Where the Purchaser submits electronic copies of Working Documents to OneSteel Reinforcing, then OneSteel Reinforcing reserves the right to charge for the printing costs associated with those Working Documents.
22.4 Should errors occur as a result of Working Documents prepared by the Purchaser or a third party, the Purchaser is liable for the cost of rectifi cation.
22.5 All Working Documents will remain in the custody and control of OneSteel Reinforcing.
22.6 A Quotation does not include any fee for design, re-design, detailing, re-detailing, scheduling or re-scheduling of Working Documents to be prepared by OneSteel Reinforcing unless stated in the Quotation, The Purchaser must pay OneSteel Reinforcing’s fees for such services, if applicable, when such Working Documents are prepared.
22.7 OneSteel Reinforcing will provide only two copies of material processing supply schedules and associated installation location plans.
22.8 OneSteel Reinforcing reserves the right to schedule distribution steel as detailed in the Working Documents or as otherwise agreed in writing.
22.9 Unless authorised in writing, neither the Purchaser nor any third party is authorised to reproduce, adapt or use in any manner whether part or whole any Working Documents prepared by OneSteel Reinforcing (whether prepared on a fee paying basis or not). Any unauthorised reproduction, adaptation or use may be, among other things, a breach of copyright and actionable by OneSteel Reinforcing.
22.10 The Purchaser indemnifi es OneSteel Reinforcing against all claims and all costs, liabilities and expenses incurred by OneSteel Reinforcing as a result of or related to:
(a) any inaccuracy, omission or error in the Working Documents prepared by the Purchaser or a third party; or
(b) Working Documents, or any other documents provided by the Purchaser to OneSteel Reinforcing for the purposes of or in the course of the supply of Goods or performance of Works, breaching a third party’s intellectual property rights, and this clause 22.10 survives termination or expiry of the Contract.
23. MISCELLANEOUS23.1 A notice under the Contract can only be in writing and can
only be given to a party: (a) personally; (b) by registered post to the last known place of business or
residence or registered offi ce. Such notice is deemed to be received at the time at which the letter is delivered in the ordinary course of post;
(c) by facsimile transmission to the last known facsimile number. Such notice is deemed to be received when the sending machine confi rms notice has been sent; and
(d) by electronic transmission to the last known email address. Such notice is deemed to be received when the sending machine confi rms notice has been sent.
23.2 The Contract is governed by the laws in the State of New South Wales and the courts of that jurisdiction have exclusive jurisdiction in connection with the Contract.
23.3 A party must not assign its benefi ts or obligations under the Contract without the prior consent in writing of the other party and such other party must not unreasonably withhold its consent to an assignment.
23.4 A party waives a right under the Contract only by written notice that it waives that right.
23.5 If a provision of the Contract would, but for this clause 23.5. be unenforceable:
(a) the provision must be read down to the extent necessary to avoid that result; and
(b) if the provision cannot be read down to that extent, it must be severed without affecting the validity and enforceability of the remainder of the Contract.
REINV
ENTING
R
EINFORCIN
G
www.reinforcing.co
m
www.re
inforcing. tv
OneSteel Reinforcing Pty Limited ABN 22 004 148 289
National Offi ce: Lvl 8. 205 Pacifi c Hwy. St Leonards NSW 2065 Phone: 02 8424 9800 Fax: 02 8436 4361Email: [email protected]
Term
s & C
on
ditio
ns
National Product & Services Catalogue 2011/2012
132Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
No
tes
Notes
No
tes
National Product & Services Catalogue 2011/2012
133Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
No
tes
Notes
National Product & Services Catalogue 2011/2012
MELBOURNE
SYDNEY
BRISBANE
HorshamAlbury
Canberra
Orange
TamworthCoffs Harbour
Lismore
Gladstone
Rockhampton
Mackay
Townsville
Cairns
Darwin
Wagga Wagga
Adelaide
Launceston
Hobart
Perth
GREATER BRISBANE AREA
GREATER MELBOURNE AREA
GREATER SYDNEY AREA
McGraths Hill
Newcastle
Central Coast
Revesby
Wetherill Park NationalOffice
SmeatonGrange
Villawood
Wollongong
Carole Park
BrisbaneStrathpine
Maroochydore
Gold Coast
ClevelandToowoomba
Altona North
Somerton
Wingfield
DandenongNoble Park
Ringwood
Geelong
OneSteel Reinforcing Australia wide Branches(Additional authorised distributors in other areas)
Guaranteed Quality • Australian made REBAR & REOMESH®
• Independently Certifi ed by ACRS (AS/NZS 4671)• National Code of Practice compliant
At your service wherever you are • Australia-wide Branch & Distributor Network• Unmatched experience & applications knowledge• Dedicated PREFAB/CUT & BENT Mesh facilities
Logistics & Transport • Experienced in servicing remote locations• Special containers for long distance transport• Pre-slinging and other OH&S initiatives
Scheduling & Technical Support • Experienced national & regional engineers• Specialised design and detailing assistance• Advanced reinforcement scheduling solutions
Your One-Stop-Reo-Shop • Wide range of accessories and materials• Comprehensive processing options• Complete package solutions
134Note: OneSteel Reinforcing reserve the right to change specifi cations without notice. Not all products are available at all OneSteel Reinforcing Branches.
Check with your local OneSteel Reinforcing Branch for product availability. Warranties given on all accessories are manufacturers warranties only.
Bran
ch N
etwo
rk
REINVENTING
R
EINFORCIN
G
www.reinforcing.com
www.reinforcing. tv
Build with OneSteel Reinforcing
ACT
Canberra OneSteel Reinforcing17 Sheppard Street, Hume ACT 2620Phone: 02 6203 0200 Fax: 02 6260 1286Email: [email protected]
New South Wales
Albury OneSteel Reinforcing327 Kiewa Street, Albury NSW 2640Phone: 02 6021 1466 Fax: 02 6041 1594Email: [email protected]
Central Coast OneSteel ReinforcingCnr Gavenlock Rd & Marklea Close,Tuggerah NSW 2259 Phone: 02 4351 1077 Fax: 02 4351 1075Email: [email protected]
Coffs Harbour OneSteel Reinforcing c/- OneSteel MetalandCnr Elswick & Isles Drive, Coffs Harbour NSW 2450 Phone: 02 6652 3744 Fax: 02 6652 4226Email: [email protected]
Lismore OneSteel Reinforcing c/- OneSteel Metaland39-41 Habib Drive, Lismore South NSW 2480Phone: 02 6621 8722 Fax: 02 6621 8497Email: [email protected]
McGraths Hill OneSteel Reinforcing38 Park Road, McGraths Hill NSW 2756 Phone: 02 4587 9679 Fax: 02 4587 9122Email: [email protected]
Newcastle OneSteel Reinforcing15 Statham Street, Bennetts Green NSW 2290Phone: 02 4948 7433 Fax: 02 4947 2084Email: [email protected]
Orange OneSteel Reinforcing5 Stephen Place, Orange NSW 2800Phone: 02 6362 2299 Fax: 02 6362 4994Email: [email protected]
Port Macquarie OneSteel Reinforcing10 Belah Road, Port Macquarie NSW 2444 Phone: 02 6581 1144 Fax: 02 6581 1181Email: [email protected]
Revesby OneSteel ReinforcingGate 3 Mons Road, Revesby NSW 2212 Phone: 02 9792 9062 Fax: 02 9792 1971Email: [email protected]
Smeaton Grange OneSteel Reinforcing2-4 Bluett Drive, Smeaton Grange NSW 2567 Phone: 02 4648 1691 Fax: 02 4648 1311Email: [email protected]
Tamworth OneSteel Reinforcingc/- OneSteel Metaland26-30 Goonan Street, West Tamworth NSW 2340Phone: 02 6765 4044 Fax: 02 6765 2552Email: [email protected]
Wagga Wagga OneSteel ReinforcingCnr Say & Schiller Streets, Wagga Wagga NSW 2650 Phone: 02 6921 4178 Fax: 02 6921 7069Email: [email protected]
Wetherill Park OneSteel Reinforcing14 Walker Place, Wetherill Park NSW 2164Phone: 02 9725 1799 Fax: 02 9756 1168Email: [email protected]
Wollongong OneSteel Reinforcing14-16 Lady Penrhyn Drive, Unanderra NSW 2526Phone: 02 4272 9889 Fax: 02 4271 8718Email: [email protected]
Northern Territory
Darwin OneSteel ReinforcingLot 1611 Bombing Road, Winnellie NT 0820Phone: 08 8947 0330 Fax: 08 8947 0358Email: [email protected]
Queensland
Brisbane OneSteel Reinforcing 220 Bradman Street, Acacia Ridge QLD 4110Phone: 07 3845 5655 Fax: 07 3845 5697Email: [email protected]
Cairns OneSteel Reinforcing Lot 25 Hargreaves Street, South Cairns Industrial Estate. Edmonton QLD 4869Phone: 07 4045 5955 Fax: 07 4045 5922Email: [email protected]
Carole Park OneSteel Reinforcing23-25 Argon Street, Carole Park QLD 4300Phone: 07 3271 2099 Fax: 07 3271 2950Email: [email protected]
Cleveland OneSteel ReinforcingLot 11 Freeth Street, Cleveland QLD 4163 Phone: 07 3821 3222 Fax: 07 3821 3233Email: [email protected]
Gladstone OneSteel Reinforcing c/- OneSteel MetalandBensted Street, Gladstone QLD 4680Phone: 07 4972 8033 Fax: 07 4972 8066Email: [email protected]
Gold Coast OneSteel ReinforcingCnr Precision Drive & Barnett Place, Ernest QLD 4214Phone: 07 5594 0599 Fax: 07 5594 0495Email: [email protected]
Mackay OneSteel Reinforcing12-18 Success Street, Paget QLD 4740 Phone: 07 4998 5875 Fax: 07 4998 5906Email: [email protected]
Maroochydore OneSteel Reinforcing517 Maroochydore Rd, Kunda Park QLD 4556 Phone: 07 5445 1561 Fax: 07 5445 1038Email: [email protected]
Rockhampton OneSteel Reinforcing88 Hollingsworth Street, North Rockhampton QLD 4701Phone: 07 4927 9155 Fax: 07 4922 2773Email: [email protected]
Strathpine OneSteel Reinforcing8 Duntroon Street, Strathpine QLD 4500Phone: 07 3205 6766 Fax: 07 3205 4722Email: [email protected]
Toowoomba OneSteel ReinforcingLot 4 Production Court, Toowoomba QLD 4350 Phone: 07 4633 3800 Fax: 07 4633 3690Email: [email protected]
Townsville OneSteel Reinforcing399 Bayswater Road, Garbutt QLD 4814Phone: 07 4775 5100 Fax: 07 4775 1222Email: [email protected]
South Australia
Adelaide OneSteel Reinforcing519 Cross Keys Road, Cavan SA 5094Phone: 08 8349 8666 Fax: 08 8349 7555Email: [email protected]
Wingfi eld OneSteel Reinforcing305 Hanson Road, Wingfi eld SA 5013Phone: 08 8244 8630 Fax: 08 8243 0552Email: reowingfi [email protected]
Tasmania
Hobart OneSteel Reinforcing9 Sunmont Street, Derwent Park TAS 7009Phone: 03 6273 0300 Fax: 03 6273 0315Email: [email protected]
Launceston OneSteel Reinforcing36b Murphy Street, Invermay TAS 7248Phone: 03 6334 3410 Fax: 03 6334 3412Email: [email protected]
Victoria
Altona North OneSteel Reinforcing2-22 Kyle Road, Altona North VIC 3025Phone: 03 9207 2200 Fax: 03 9207 2270Email: [email protected]
Dandenong OneSteel Reinforcing6-10 Business Park Drive, Lynbrook VIC 3975Phone: 03 9554 7999 Fax: 03 9554 7900Email: [email protected]
Geelong OneSteel Reinforcing2 Haworth Court, Breakwater VIC 3219Phone: 03 5248 3500 Fax: 03 5248 6315Email: [email protected]
Horsham OneSteel Reinforcing36 Hamilton Road, Horsham VIC 3400Phone: 03 5382 3192 Fax: 03 5381 1173Email: [email protected]
Ringwood OneSteel ReinforcingFactory 10/505 Maroondah Highway,Ringwood VIC 3134Phone: 03 9879 5360 Fax: 03 9870 0575Email: [email protected]
Somerton OneSteel Reinforcing134 Hume Hwy, Somerton VIC 3062Phone: 03 8339 3600 Fax: 03 8339 3699Email: [email protected]
Western Australia
Perth OneSteel Reinforcing53 Harrison Road, Forrestfi eld WA 6058Phone: 08 6332 3111 Fax: 08 6332 3149Email: [email protected]
Head Offi ce
National Offi ce OneSteel ReinforcingLevel 8. 205 Pacifi c Highway, St Leonards NSW 2065Phone: 02 8424 9800 Fax: 02 8436 4361Email: [email protected]
OneSteel Reinforcing Pty Limited ABN 22 004 148 289 Locked Bag 3050. Artarmon NSW 1570. ©OSR1189
OneSteel Reinforcing Branch Network
Top Related