OblivionDesigned by Koray Malhan
Your office habitat may re-create your working habits.
Now, it’s time to re-work your office.
54
ORGATEC | 2014
Oblivion is conceived as a very basic geometry, the conical shape provides many structural
advantages apart from an aesthetic statement. All the vertical posts and brackets that
are holding the horizontal surfaces, are pointing to the central point of the structure.
Therefore, all the vertical surfaces support the horizontal ones and vice versa. Thus, we
can have all the shelves, desktops, seating units, etc, without the use of any leg supports.
This provides a great freedom in practical use as well as a visual lightness to the design,
where all horizontal surfaces are floating freely without a distruption of a column.
7
98
Each unit is constructed in several steps decided together with the architect and the
customer. The first step is the floor diameter, the second decision is the height and the
top diameter, thus a void is constructed in volume. Finally, the decisions for the inner
construction and functions are made. This concerns the planning of the shelves, desks,
cabinets, seats etc, depending on the desired performance that this void is dedicated to.
10
The next decision involves the electrical and electronical equipment, where the vertical
and horizontal wiring can easily be conducted accordingly through the aluminium
extruded beams. Following this, lighting solutions can be planned as LED strips in the
vertical beams where necessary. Finally, the outer surface cover is installed. The colour
can be selected in a presented fabric chart or again be developed uniquely with the
customer if needed.
13
Technical Details
OBLIVION H130_CLS Ø min: 3409 mm / 134.2 inchØ max: 3870 mm / 152.4 inchH: 1600 mm / 63.0 inch
OBLIVION H130_OTR Ø min: 3409 mm / 134.2 inchØ max: 3870 mm / 152.4 inchH: 1600 mm / 63 inch
OBLIVION H240_OTR Ø min: 3089 mm / 121.6 inchØ max: 3870 mm / 152.4 inchH: 2650 mm / 104.3 inch
TechnicalSpecificationsOblivionH360_CLS, H240CLS, H130_CLS, H130_TPL Materials & Finishes
Aluminium pillars: Anodized or epoxy painted on specially-designed aluminium profile.
Shelves: Laminate, veneer and lacquer finish on 14 mm (0.6 inch) MDF, wax polished edges.
Table top: Laminate, veneer and lacquer finish on 25 mm (1 inch) MDF, wax polished edges.
Shelf brackets: Zamak injection base, ABS injection cover.
Table brackets: Epoxy on specially-formed 3 mm (0.1 inch) laser cut sheet.
Horizontal curved profiles: Epoxy on 70x20x2 mm (2.8x0.8x0.1 inch) box profile.
Surfaces: Fabric cover on specially-curved 12 mm (0.5 inch) plywood.
H240_OTR, H130_OTR Materials & Finishes
Aluminum pillars: Anodized or epoxy on specially-designed aluminium profile.
Shelves: Laminate finish on 14 mm (0.6 inch) MDF, wax polished edges.
14 mm (0.6 inch) MDF with veneer finish, edges 2 mm veneer band.
14 mm (0.6 inch) MDF with lacquer finish, edges 2 mm dyeable ABS.
Table top: 25 mm (1 inch) MDF with laminate finish, edges wax polish.
Veneer finish on 25 mm (1 inch) MDF, 2 mm (0.1 inch) veneer band edges.
Lacquer finish on 25 mm (1 inch) MDF, 2 mm (0.1 inch) ABS edges.
Shelf brackets: Epoxy on specially-formed 1.5 mm (0.04 inch) laser cut sheet.
Table and sitting brackets: Epoxy on specially-formed 3 mm (0.1 inch) laser cut sheet.
Horizontal curved profiles: Epoxy on 70x20x2 mm (2.8x0.8x0.1 inch) box profile.
Surfaces: Fabric cover on specially-curved 10 mm (0.4 inch) plywood.
Seat: After being covered with 150 gr (0.33 lbs) fiber on 4 cm (1.6 inch) 35D HR CNC sponge on 6 mm (0.2 inch) MDF, seat is covered with fabric and fixed.
Back (Seating): After being covered with 35d HR CNC sponge on 12 mm (0.5 inch) MDF and 150 gr (0.33 lbs) fiber, back is covered with fabric.
Armrest with power kit: Case is made of 15 mm (0.6 inch) plywood, font and sides are coated with 1 cm (0.4 inch) Eva sponge on 1 cm (0.4 inch) 22d gray sponge is covered with fabric.
Fastening Elements Aluminium and spring profile connections;
special “zamak” corner piece and metrical bolts.
Surface connections: Special molded plastic fastening parts, metrical bolts and nuts.
Bracket connections: Sliding special connection metal sheet and metrical bolts.
Shelf and table connections: Steel bearings and metrical bolts.
OBLIVION H130_TPL Ø min: 3409 mm / 134.2 inchØ max: 3870 mm / 152.4 inchH: 1600 mm / 63 inch
OBLIVION H240_CLS Ø min: 3089 mm / 121.6 inchØ max: 3870 mm / 152.4 inchH: 2650 mm / 104.3 inch
OBLIVION H360_CLS Ø min: 2675 mm / 105.3 inchØ max: 3850 mm / 151.6 inchH: 3790 mm / 149.2 inch
1514
Material SamplesFabric ECamira
Blazer CUZ28
Blazer CUZ18
BlazerCUZ90
BlazerCUZ27
BlazerCUZ26
BlazerCUZ30
Blazer CUZ63
BlazerCUZ62
Blazer CUZ35
Blazer CUZ08
Blazer CUZ39
BlazerCUZ86
BlazerCUZ87
BlazerCUZ88
BlazerCUZ1F
BlazerCUZ82
BlazerCUZ66
Blazer CUZ02
Blazer CUZ1J
Blazer CUZ1K
BlazerCUZ1L
BlazerCUZ1E
Blazer CUZ1R
BlazerCUZ1G
Blazer CUZ21
Blazer CUZ1A
Blazer CUZ1B
Blazer CUZ1Z
Blazer CUZ2A
BlazerCUZ1M
BlazerCUZ1V
BlazerCUZ1P
Blazer CUZ1W
Blazer CUZ13
MetalGrey White
EpoxyBlackEpoxy
Laminate White
Special Laminate 3153 3190
Veneer WalnutSmoked
OakWhite Oak
Analin Black
LacqueredMat
WhiteMat
BeigeGlossy Black
Mat Black
1716
NEW YORKKoleksiyon New York228 East 58th New York, NY 10022 USATel: +1 212 486 [email protected]
DALLASKoleksiyon Dallas211 North Ervay, Suite 130Dallas, TX 75201 USATel: +1 214 577 [email protected]
International Showrooms
North America
COLOMBIASchaller GroupCra 11 No: 93A-20 Bogota, ColombiaTel: +57 1 743 [email protected]
PERUZiyazAvenue Mariscal La Mar 835 Lima, PeruTel: +51 714 [email protected]
South America
EGYPTKoleksiyon EgyptThe 47th Building, 90th Street North 5th Settlement, New Cairo, EgyptTel: +20 2266 87 [email protected]
LIBYA Avcı Interior Fourth Ring Road Venezia St, Benghazi, LibyaTel: +218 92 396 [email protected]
JORDANTriology Furniture CompanyIritiria Str. Um Uthienah Vista P.O. Box 630 - 11118 Amman, JordanTel: +962 6 [email protected]
SAUDI ARABIATechnolight P.O. Box 12679 Jeddah 21483 Saudi ArabiaTel: +966 2 669 3241 [email protected]
BAHRAINBuilders Depot SPC 104 Government Ave. Manama Centre Suite 303 Building 4Manama Kingdom of BahrainP.O. Box 21679Tel: +973 17 [email protected]
QATARAl Mana GalleriaSalwa Road Ramada Signals Nissan ShowroomP.O. Box 91 Doha, QatarTel: +974 4 428 [email protected]
IRAN Mammut Construction7th Street, Khaled Estamboli Ave, No:7, P.O. Box 1513737511 Tehran, Iran Tel: +98 21 88 109 [email protected]
MEA & AfricaRUSSIA Workplace Interiors Ltd.Moscow, RussiaTel: +7 926 124 48 [email protected]
PlanmaxPiskarevskij Prospect, 2 Building 2, Office 221 Business Center “Benois”195027, St. Petersburg, RussiaTel: +7 812 612 12 [email protected]
AZERBAIJANWorkplace InteriorsMarine Plaza, 62 Uzeyir Hajibeyli StreetBaku, AzerbaijanTel: +99 412 599 05 82 / [email protected]
KAZAKHSTANV-time Object Office Ltd.Office 111, b/c ‘Prime’ Furmanova 100 ‘g’ 050000, Almaty, KazakhstanTel: +7 727 312 11 22 / [email protected]
AUSTRALIAEnvoy FurnitureSuite 30391 Murphy Street Richmond 3121 Melbourne, AustraliaTel: +61 3 9029 [email protected]
CIS Asia PasificENGLANDKoleksiyon Furniture Limited9 Brewhouse YardLondon EC1V 4JR United KingdomTel: +44 (0)20 3405 [email protected]
TURKEYKoleksiyonCumhuriyet Mahallesi Hacı Osman Bayırı Cad. No: 25 Sarıyer 34457 Istanbul, TurkeyTel: +90 212 363 63 [email protected]
GERMANYNetwork2DesignRöntgenstrasse 104, 64291Darmstadt, GermanyTel: +49 6151 [email protected]
AUSTRIABuerofreunde GmbHBörsegasse 9, A-1010 Vienna, AustriaTel: +43 1 532 028 [email protected]
SPAINArtis, Arquitectura InteriorEntença 242, 08029 Barcelona, SpainTel: +34 973 25 78 [email protected]
NETHERLANDS DingsDesign B.V.G. van Nijenrodestraat 151 3621 GJ Breukelen, The Netherlands Tel: +31 63195 [email protected]@loading-ddesign.com
CYPRUSDivani Mobilya2 Irmak Sokak Gönyeli Çemberi, Gönyeli, Nicosia, CyprusTel: +90 392 224 04 50 - [email protected]
Europe
GRAPHIC DESIGNİrem Mangıtlı
PHOTOGRAPHSCemal Emden
Onur KolkırThomas Mayer
January 2016
Koleksiyon© All intellectual property rights, such as trade marks, patents and copyrights are reserved.
Nothing contained in this brochure may be reproduced without written permission.
For more informationplease visit
www.koleksiyoninternational.com
Top Related