New hydraulic 24V swing-leaf gates operator
S450HFAAC International Workshop 2009
Rimini, Italy
September 2009 by SAT
New FAAC swing-leaf gates hydraulic 24V operator: S450H
September 2009 by SAT
Summary Plus Technical specifications
September 2009 by SAT
Plus - 1/2
technology
Easy to install
For single-leaf up to 2 m for CBAC version or 3 m for SB version (with electrical lock)
New SB flange
New positive stop for opening and closing
1
2
3
4
5
September 2009 by SAT
6
7
8
Faster rod linear speed, respect “old” hydraulic operator
New tank without breath
New Encoder bus in the equipment
Plus - 2/2
September 2009 by SAT
1 Hybrid technologyHydraulic technology + low voltage (24 v)
The hybrid technology combines the advantages of both technologies:
- Hydraulic technology : Torque, resistance, long life and duty cycle;
- 24 V technology : high frequency use, easy speed and force control, backup battery unit
September 2009 by SAT
Long strokeOperator 402 = 240 mmOperator 422 = 240 mm Operator 400 = 260 mm
2 Easy to install - 1/5
September 2009 by SAT
Increased flexibility in the installation dimensions thanks to the very long stroke
2 Easy to install - 2/5Multi-position rear bracketThe S450H operator includes multi-position bracket (three positions), that allows the operator to be installed in a wide range of pillar dimensions.The multi-position bracket can be welded or fixed by screws.
September 2009 by SAT
2 Easy to install - 3/5
D and B quotesThe hole to be used depends on the D dimension, B dimension and opening angle.
September 2009 by SAT
2 Easy to install - 4/5D and B quotes
September 2009 by SAT
2 Easy to install - 5/5
Front bracketThe front bracket can be welded or fixed by screws
September 2009 by SAT
3 Max leaf length CBAC: 2 m SB: 3 m (with electrical lock)
September 2009 by SAT
4 NEW SB flange
September 2009 by SAT
Easy manual open/close
The operator is free to be moved manually without having to be released.The new system realizes a “real” reversible operator: the force required for manual operation is very low.
PATENTED
4 NEW SB flange – operator at rest
September 2009 by SAT
PATENTED
Controlled suction valve
Suction valve
PISTON
4 NEW SB flange – operator in closing
September 2009 by SAT
PATENTED
Controlled suction valve
Suction valve
4 NEW SB flange – operator in opening
September 2009 by SAT
PATENTED
Controlled suction valve
Suction valve
5 Positive stop11 spacers supplied for opening stop
Each spacer is wide 6 mm
September 2009 by SAT
stops
6 Faster piston rod2,5 cm/sec with E1242,0 cm/sec with E024S
Operator 400 from 0.75 to 1.5 Cm/sec
Operator 422From 1 to 1.3 Cm/Sec (2
Cm/sec PED.)
Operator 402From 1 to 1.3 Cm/sec
September 2009 by SAT
8 Encoder busCover for additional protection and design
Absolute encoder with very high resolution : < 0,1°
September 2009 by SAT
Technical specifications S450H
September 2009 by SAT
Top Related