Nadine Anseeuw
Noel Bacani
Project Goals
General Knowledge of SW
Complex Surfacing
FEA with Solidworks and Pro/E
Sustainability Reports
Rendering Techniques
About the Cycloc
§ Practical bike storage for your home
§ Capable of holding most bicycles
§ Very stylish design – no sharp edges § Made with recycled products and is considered a sustainable
Choosing the Software
• Chose SolidWorks • Handles Complex Surfaces
• Designer of Cycloc used Solidworks
• No prior experience with SW
• Easy to use
Modeling
Curve of the Body
Tapered Lip
Helical Sweep Cut
Fillets
Curve of Main Body
Tapered Lip
Helical Sweep
Fillets
FEA Objectives
§ Compare SW and Pro/E results § Optimize the design § Factor of Safety
SolidWorks Pro/E
Max Displacement = 2.677e-‐2 mm Max Displacement = 3.306e-‐2 mm
Simulation Express Optimization
§ Min = 8.1mm, Max = 35mm § Constraint: Min 16.5 for Factor of Safety § Minimize Mass
ManualOptimization Design Tip
Thickness (mm)
Weight (grams)
Max von Mises Stress (N/m2)
Max Displacement (mm)
Min Factor of Safety
Option 1 15 5873.76 243,287.5 0.2511 28.34
Option 2 10 5238.13 246,244.2 0.2567 28.0
Option 3 8 5212.32 248,254.3 0.2562 27.77
Option 4 7 5197.08 254,951.8 0.2552 27.00
Option 5 6 5183.16 228,608.3 0.2537 30.16
SolidWorks
PhotoView 360
PhotoView 360
PhotoView 360
Thank You Very Much!
Questions?
Go Canucks Go!
Top Related