Download - Morrison - Knoll · Morrison veneer finishes apply to top caps and trim, veneer and combination panels and add-on panels, hinged doors, worksurfaces, desk support panels, pedestal

PLMORR0319 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains

50% recycled content and 15% post consumer waste.

Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041

knoll.com

Price ListMarch 2019

Morrison

Morrison P

rice List M

arch 2019

Table of Contents

Introduction Knoll and Sustainable Design 3Introduction 4Morrison System Finishes 5Knoll Color Program 6Morrison System Legacy Finishes 8

Panel Planning Panels 10Doors 42Windows 44Markerboard and combination add-on panels 46Upholstered add-on panels 47Upholstered Options add-on panels 48Veneer and combination add-on panels 49Add-on connectors, post assemblies 50Connectors, post assemblies 54High-low connectors 60High-low post assemblies 62Panel accessories 68Trim covers for reconfiguration 70Morrison Access 72Currents trim for Morrison 77Top cap and raceway cover kits 78High-low top caps 80PDC and multiple outlet covers 81Stackable add-up panels 82Stackable add-up connectors and trim caps 85Power distribution components 88Power distribution 101

Worksurface Planning Worksurfaces, 1 3/4 103Worksurfaces, 1 1/4 109Morrison Options worksurfaces, 1 1/4 120Currents worksurfaces for Morrison 130Cascade edge worksurfaces 136Universal and conference desk end panels 142VDT corner and transitional end panels 143Kneehole filler and transitional filler panels 144Return and bridge filler panels 145Brackets 146Morrison Network Desk System 152Power distribution components 158

Morrison

PLMORR03191

Copyright � 2019 Knoll, Inc.All rights reserved.All prices effective 03/15/2019.

Storage Floorstanding pedestals 166Double-width floorstanding pedestals and cabinets 167Mobile pedestals 169Pedestal accessories 170Intermediate shelves 171Aluminum shelf 172Shelves and flush counter surfaces, 13/4� 173Shelves and flush counter surfaces, 11/4� 175Morrison overhead cabinets 177Task lights for panel or wall mounted storage 178Morrison Network overhead storage 179Overhead Storage 182Morrison Options overhead cabinets and shelves 183Morrison Options 184Reuter open shelf 186Reuter open overhead 187Reuter overhead cabinet 188Reuter overhead storage 192Reuter flat front overhead cabinet 194Task Lights for Reuter Overhead Storage 195Morrison Network privacy screens 196Kiosk vertical storage 199

Accessories Accessories 200Wall Mounting of Knoll Products 201

Alpha-Numeric Index 203

Selling Policy 211

KnollKey Lock Program 213

General Ordering Information 214

Morrison

2

Knoll and Sustainable Design

Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.

Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level�certification from Scientific Certification Systems (SCS).

In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.

Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement

solutions to some of the world’s most pressing challenges, including environmental change.

• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.

Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw

materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.

Setting Industry Standards• Knoll partners with MTS (The Institute for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable

Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.

• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level� sustainabilitystandards for the contract furniture industry.

• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.

• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.

• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.

For more information about Knoll and sustainable design, visit knoll.com/environment.

3

Introduction

This price list provides you with theproduct information you need tospecify and order Knoll Morrison.

Morrison is a completely integratedoffice system, capable of all typesof office planning. Morrison mayplan as a panel system, with panelmounted components, or as afreestanding desk system. Morrisoncan also be combined with theCurrents service wall for superiorwire management, cable access andoff-module planning. Majorcomponents – panels, worksurfacesand storage – may be configured orreconfigured in all types ofplanning listed above.

Information about Morrison is foundin three companion books: thisPrice List, the Planning Guide andthe Brochure.

The Price List arranges componentsin a logical sequence.

The first section includes all majorcomponents required for panelsystem planning: Morrison andOptions panels, add-on panels,connectors, doors, Morrison Access,top cap kits, stackable add-uppanels and power distribution.

The second section includes thosecomponents required forworksurface planning and support:Morrison and Options worksurfaces,Currents worksurfaces for Morrison,desk panels, Morrison Network desksupports, brackets, and powercomponents.

The third section includes storagecomponents for panel based orfreestanding planning: pedestals,Intermediate shelves, Morrison,Options and Reuter overheadstorage and lighting, screens, andvertical storage.

The fourth section includesaccessories. The complete range ofcomputer support and accessoriescan be found in the KnollExtraprice list.

How to order MorrisonMorrison is a component-basedsystem. To ensure a complete orderfor a workstation or project, specifycomponents in the same order asthe price list.

You will find that Morrison patternnumbers contain a logical,alphanumeric sequence describingthe type, size, features, and finishof the component.

To specify components, consult theordering code examples andapplication notes provided.

For example, to order a 13/4�folkstone grey laminate worksurfacewith grommets, 48�W by 24�Dspecify:MW2-S4824A114. Details follow:

MW2 13/4� worksurfaceS Straight48 Width24 DepthA With grommets114 Folkstone Grey

laminate

For further assistance with orderingor specifying Morrison, consult yourKnoll representative or Knolldealer.

Please note that pattern numbersbeginning with the letter A- areCurrents pattern numbers andpatterns beginning with the letterR- are Reuter storage patternnumbers.

Note to Knoll Dealer Sellers:The products contained in thisprice list are also available throughthe Knoll Essentials program, withlimited exceptions. For additionalinformation, please contact yourcustomer service representative orvisit Knoll Exchange.

Morrison

4

Morrison System FinishesKnollTextiles

KNOLLTEXTILES

Approved for vertical panels andprivacy screens.

Fabric Group 10Annex (W1360)Beacon (W1597)Broadcloth II (W1619)Circuit (W1754)Element (W1077)Growth Spurt (W692)Messa (W2061)Pivot (W1926)Skylark (W1718)Symbolic Detail (W693)Tailor Made II (W1610)Twister (W1926)Versatility (W432)

Fabric Group 20Bauhaus Block (W296A)Circle Line (W1146)Criss Cross (W305)Delite (K2026)Edo (W2111)Logic (W1318)Mainframe (W1783)Nematic II (W1620)Photon II (W1695)Reflect (W884)

Fabric Group 30Flow (W565)Micro (W465)Relay (W1020)

Fabric Group 40Amplify (W1215)Bandwidth (W1219)Crossroad (K2085)Hourglass (K1523)Ornament (W1078)Palladium (W1030)Spellbound (W1464)

*Not available for upholsteredconnector trim covers

Fabric Group 50Presto (K1000)

Fabric Group 55Ransom (K1298)

Ported panels can only beupholstered with textiles approvedfor application on Reff panels.

Customer’s Own Material is subjectto an application testing fee of perfabric and a fee for UL testing.Fabric requirements - applicationtest, 10 yards; UL test, 15 yards.COM is also subject to extendedleadtimes. COM panels are priced atGroup 10 plus cost of fabric.

Morrison

5

Knoll Color ProgramMorrison System Finishes

Core paint and laminate finishes

Specify Core finishes for all new customers

Core Legacy

Topcapsandtrim,

Panels(veneer

only)

Glazedpanel,

window,door

frames(tex-

tured)

Deskpanels,storagefronts

Hingeddoors

Desksup-

ports,stan-

chion,storage,brack-

ets,racewaycovers

Work-sur-

facesand

shelves(all)

Work-sur-

facesand

shelves(post-

formed)

CascadeEdgework-sur-

faces Pedestals

ReuterOver-head

611 Beige Mist Metallic • • • • P2 P2

118 Bright White • • • • • • • P3 P3

112 Brown • • • • P1 P1

113 Dark Grey Y3 • • • • P1 P1

114 Folkstone Grey LA • • • • • • • P1 P1

111 Jet Black • • • • • • P1 P1

115 Medium Grey Y2 • • • • P1 P1

612 Medium Metallic Grey J • • • • P2 P2

119 Pumice F • • •116 Sandstone • • • • P1 P1

613 Silver 3 • • • • P3 P3

117 Soft Grey E/M42 • • • • • • • P1 P1

128 Fog G • •129 Micro Sand •121 Micro Grey •122 Brushed Sand •123 Brushed Grey •124 Medium Cherry • •125 Natural Maple • •126 Natural Cherry • •127 Walnut • •

This price list contains pricing for Core finishes. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheet or contact yourcustomer service representative.

The new, Core P1 finishes in Morrison have the same list prices as P2. Additionally, Pedestals and Reuter overhead storage have a separate P3 price point forSilver and Bright White.

The new Core finish 113 Dark Grey is not a match to the Morrison Legacy finish NV. It is a match to the Dividends Legacy finish Y3.

The new Core finish 115 Medium Grey is not a match to the Morrison Legacy finish NJ. It is a match to the Dividends Legacy finish Y2.

Patterned laminates (Micro, Brushed and Wood grain laminates) are available on Morrison postformed worksurfaces and shelves (straight, trapezoidal, VDT).

Wood grain laminates are also available on Cascade Edge worksurfaces.

Morrison

6

Knoll Color ProgramMorrison System Finishes

Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represets a different combination of pore fill optionsand gloss levels.

Core Veneer Finishes

V1 Techwood637 Natural638 Blond Maple639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut628 Dark Mahogany513 Medium Teak514 Espresso

V2 Premium Techwood647 White Pine642 Grigio

V2 Natural Veneer002 Bronzed Cherry006 Maple017 Light Walnut020 Natural Oak021 Peacock Green Walnut022 Old English Walnut

Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore

D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore

Morrison veneer finishes apply to top caps and trim, veneer and combination panels and add-on panels, hinged doors, worksurfaces, desk support panels,pedestal fronts, shelves, Network, Options and Flat Front Reuter overhead storage fronts. Please consult the individual price list pages for details on price andavailability.

In September 2008 all existing Morrison finishes were transferred from our East Greenville Plant to our Toronto plant. All existing finishes were changed toclosed pore finishing and assigned new finish codes.

This price list contains pricing for Core finishes. Core finishes include some existing Morrison finishes formally referred to as Techgrain (cross-referenced above)as well as numerous new veneer finishes now available on Morrison. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheetor contact your customer service representative.

Morrison

7

Morrison System Legacy Finishes

Work-surfaces Panels

DeskPanels Shelves

Top caps/Trim

covers

GlazedPanel/

Window/Door

Frames*Storagefronts

StorageCases

Desk Supports,Stanchions, Steelshelves, brackets,

raceway covers

Plastic Laminates Light Grey L L

Medium Grey G G

Sand D D

Pumice F F

Snow B B

Wood GrainLaminates

Clear Maple(Currents forMorrisonworksurfaces only)

CM

Paint Group 2 Metallic Flint 2 2 2 2 2 2

Light metallic grey U U U U U U

Medium metallicgrey

J J J J J J

Dark metallic grey V V V V V V

Light metallic tan W W W W W W

Metallic beige H H H H H H

Paint Group 3 Silver 3 3 3 3 3 3

White B B B B B B

* Paint finishes for glazed panels, window and door frames are textured only.Specify legacy finishes to match existing product only. Legacy finishes are not available for new customers.

This price list contains pricing for Core finishes. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheet or contact yourcustomer service representative.

In September 2008 all existing Morrison veneer finishes were transferred to our Toronto plant. All existing finishes were changed to closed pore finishing andassigned new finish codes. The older, semi-open pore finishes are no longer available.

As of February 2009 Legacy laminates will be priced 10% higher than Core laminates.

Morrison

8

This page intentionally left blank

Panels30�H upholstered

description w d h pattern no. 10 15 20 30 40 45

High performance panels, upholstered both sides 18� 21/4� 30� MP2-3018-( ) $572. $625. $646. $741. $859. $912.24� 21/4� 30� MP2-3024-( ) 622. 713. 737. 847. 937. 1,014.30� 21/4� 30� MP2-3030-( ) 705. 783. 811. 932. 1,014. 1,124.36� 21/4� 30� MP2-3036-( ) 780. 878. 903. 1,037. 1,154. 1,262.42� 21/4� 30� MP2-3042-( ) 886. 990. 1,014. 1,168. 1,281. 1,421.48� 21/4� 30� MP2-3048-( ) 963. 1,076. 1,109. 1,273. 1,445. 1,552.60� 21/4� 30� MP2-3060-( ) 1,119. 1,261. 1,293. 1,486. 1,658. 1,790.

Options panels, upholstered both sides 18� 21/4� 30� MP2-3018-N( ) 539. 574. 595. 684. 783. 833.24� 21/4� 30� MP2-3024-N( ) 592. 658. 678. 776. 860. 935.30� 21/4� 30� MP2-3030-N( ) 658. 715. 741. 849. 935. 1,035.36� 21/4� 30� MP2-3036-N( ) 732. 804. 829. 951. 1,055. 1,156.42� 21/4� 30� MP2-3042-N( ) 831. 905. 935. 1,070. 1,174. 1,307.48� 21/4� 30� MP2-3048-N( ) 905. 990. 1,014. 1,169. 1,326. 1,423.60� 21/4� 30� MP2-3060-N( ) 1,050. 1,154. 1,183. 1,362. 1,523. 1,643.

Order Code

Example: MP2-3030-15-W210/20

MP2 Panel30 Height30 Width15 Surface type and group

no.W210/20 Upholstery

Specification Information

Surface type/finish suffixes

For upholstered panels, specifyupholstery pattern number after thefabric group number.10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Upholstered panels may be orderedin a combination of fabrics. Listprice is the average of the two fabricgrades.

For combinations of fabrics list bothsuffixes (e.g. 10/20) and upholsterypattern numbers.

Application Notes

Top caps/raceway covers arespecified as separate kits, and arebulk shipped to facilitateinstallation.

Non-powered panel racewaysaccommodate 96 or more 4-pairunshielded twisted pair cables(Category 5, 5E or 6). Poweredpanel raceways accommodate up to48 4-pair cables. Power componentsare ordered separately andfield-installed.

High performance panel acousticalratings:NRC .80, STC 24

Options panel acoustical ratings:NRC .75, STC 8

Upholstered panels may bespecified to achieve ASTM E-84Class ‘‘A’’ flamespread rating.

Morrison

10

Panels30� H glazed

description w d h pattern no. C/T

Glazed panels 18� 21/4� 30� MP2-3018-C/T-( ) $1,273.24� 21/4� 30� MP2-3024-C/T-( ) 1,423.30� 21/4� 30� MP2-3030-C/T-( ) 1,585.36� 21/4� 30� MP2-3036-C/T-( ) 1,707.42� 21/4� 30� MP2-3042-C/T-( ) 1,913.48� 21/4� 30� MP2-3048-C/T-( ) 2,058.

Order Code

Example: MP2-3030-T-613

MP2 Panel30 Height30 WidthT Acid etched tempered

glass613 Frame finish

Specification Notes

For glazed panels specify:C- Clear tempered glassT- Acid etched tempered glass

Frame finish

Application Notes



60�W glazed panels are notavailable.

Morrison

11

Pan

elP

lann

ing

Panels30�H combination veneer/upholstery


Combination Veneer 1/upholstery 18� 21/4� 30� MP2-3018-( )-( ) $893. $917. $921. $973. $1,032. $1,055.24� 21/4� 30� MP2-3024-( )-( ) 958. 1,002. 1,010. 1,068. 1,109. 1,153.30� 21/4� 30� MP2-3030-( )-( ) 1,072. 1,105. 1,119. 1,173. 1,222. 1,274.36� 21/4� 30� MP2-3036-( )-( ) 1,174. 1,220. 1,229. 1,306. 1,361. 1,412.42� 21/4� 30� MP2-3042-( )-( ) 1,362. 1,404. 1,423. 1,498. 1,589. 1,643.48� 21/4� 30� MP2-3048-( )-( ) 1,536. 1,590. 1,612. 1,707. 1,794. 1,861.

Combination Veneer 2/upholstery 18� 21/4� 30� MP2-3018-( )-( ) 1,070. 1,098. 1,107. 1,169. 1,231. 1,268.24� 21/4� 30� MP2-3024-( )-( ) 1,154. 1,204. 1,216. 1,279. 1,335. 1,379.30� 21/4� 30� MP2-3030-( )-( ) 1,289. 1,319. 1,342. 1,411. 1,464. 1,534.36� 21/4� 30� MP2-3036-( )-( ) 1,416. 1,458. 1,481. 1,560. 1,630. 1,697.42� 21/4� 30� MP2-3042-( )-( ) 1,635. 1,690. 1,706. 1,802. 1,907. 1,972.48� 21/4� 30� MP2-3048-( )-( ) 1,841. 1,913. 1,936. 2,049. 2,152. 2,230.

Order Code

Example: MP2-3030-Y811-15-W210/20

MP2 Panel30 Height30 WidthY811 Veneer finish15 Fabric groupW210/20 Upholstery


When specifying combinationpanels, follow panel size withveneer finish code, the upholsteryfinish code and pattern number.

Surface type/finish suffixesFor upholstered panels, specifyupholstery pattern number after thefabric group number.10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes



60�W panels are not available withveneer surfaces.

Morrison

12

Panels30�H veneer both sides

description w d h pattern no. V1 V2

Veneer both sides 18� 21/4� 30� MP2-3018-V-( ) $1,204. $1,436.24� 21/4� 30� MP2-3024-V-( ) 1,281. 1,540.30� 21/4� 30� MP2-3030-V-( ) 1,424. 1,709.36� 21/4� 30� MP2-3036-V-( ) 1,564. 1,872.42� 21/4� 30� MP2-3042-V-( ) 1,729. 2,077.48� 21/4� 30� MP2-3048-V-( ) 1,929. 2,315.

Order Code

Example: MP2-3030-V-Y811

MP2 Panel30 Height30 WidthV Veneer both sidesY811 Veneer finish


For veneer panels specify:

Veneer finish

Application Notes



60�W panels are not available withveneer surfaces

Morrison

13

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 39� MP2-3918-( ) $620. $685. $702. $810. $932. $992.24� 21/4� 39� MP2-3924-( ) 678. 780. 805. 922. 1,018. 1,107.30� 21/4� 39� MP2-3930-( ) 765. 849. 883. 1,008. 1,107. 1,226.36� 21/4� 39� MP2-3936-( ) 845. 953. 987. 1,123. 1,259. 1,368.42� 21/4� 39� MP2-3942-( ) 960. 1,073. 1,107. 1,268. 1,393. 1,540.48� 21/4� 39� MP2-3948-( ) 1,043. 1,171. 1,210. 1,382. 1,579. 1,691.60� 21/4� 39� MP2-3960-( ) 1,219. 1,365. 1,408. 1,613. 1,803. 1,952.

Options panels, upholstered both sides 18� 21/4� 39� MP2-3918-N( ) 592. 624. 641. 737. 849. 906.24� 21/4� 39� MP2-3924-N( ) 638. 710. 736. 844. 935. 1,012.30� 21/4� 39� MP2-3930-N( ) 713. 780. 810. 925. 1,012. 1,123.36� 21/4� 39� MP2-3936-N( ) 798. 876. 902. 1,035. 1,149. 1,260.42� 21/4� 39� MP2-3942-N( ) 905. 989. 1,012. 1,165. 1,277. 1,416.48� 21/4� 39� MP2-3948-N( ) 989. 1,073. 1,107. 1,270. 1,443. 1,542.60� 21/4� 39� MP2-3960-N( ) 1,142. 1,259. 1,290. 1,483. 1,654. 1,784.

Order Code

Example: MP2-3930-15-W210/20








Application Notes






Morrison

14

Panels39�H glazed



Order Code

Example: MP2-3930-C-613

MP2 Panel39 Height30 WidthC Clear tempered glass613 Frame finish



Frame finish

Application Notes




Morrison

15

Pan

elP

lann

ing



Combination Veneer 1/upholstery 18� 21/4� 39� MP2-3918-( )-( ) $966. $997. $1,002. $1,057. $1,119. $1,149.24� 21/4� 39� MP2-3924-( )-( ) 1,041. 1,086. 1,098. 1,161. 1,210. 1,258.30� 21/4� 39� MP2-3930-( )-( ) 1,168. 1,204. 1,219. 1,274. 1,326. 1,387.36� 21/4� 39� MP2-3936-( )-( ) 1,279. 1,321. 1,342. 1,412. 1,476. 1,535.42� 21/4� 39� MP2-3942-( )-( ) 1,481. 1,527. 1,542. 1,635. 1,728. 1,784.48� 21/4� 39� MP2-3948-( )-( ) 1,666. 1,729. 1,750. 1,860. 1,953. 2,023.


Order Code

Example: MP2-3930-Y811-15-W210/20





Application Notes




Morrison

16




Order Code





Veneer finish

Application Notes




Morrison

17

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 42� MP2-4218-( ) $654. $722. $736. $847. $978. $1,040.24� 21/4� 42� MP2-4224-( ) 710. 825. 845. 972. 1,072. 1,165.30� 21/4� 42� MP2-4230-( ) 804. 899. 928. 1,066. 1,165. 1,289.36� 21/4� 42� MP2-4236-( ) 893. 1,004. 1,037. 1,178. 1,317. 1,437.42� 21/4� 42� MP2-4242-( ) 1,012. 1,127. 1,165. 1,337. 1,472. 1,623.48� 21/4� 42� MP2-4248-( ) 1,105. 1,231. 1,270. 1,454. 1,654. 1,776.60� 21/4� 42� MP2-4260-( ) 1,277. 1,436. 1,483. 1,701. 1,897. 2,049.

Options panels, upholstered both sides 18� 21/4� 42� MP2-4218-N( ) 618. 661. 673. 780. 899. 954.24� 21/4� 42� MP2-4224-N( ) 670. 755. 776. 890. 987. 1,068.30� 21/4� 42� MP2-4230-N( ) 756. 825. 847. 973. 1,068. 1,178.36� 21/4� 42� MP2-4236-N( ) 835. 921. 950. 1,086. 1,211. 1,318.42� 21/4� 42� MP2-4242-N( ) 953. 1,038. 1,068. 1,226. 1,345. 1,490.48� 21/4� 42� MP2-4248-N( ) 1,038. 1,127. 1,165. 1,338. 1,519. 1,627.60� 21/4� 42� MP2-4260-N( ) 1,205. 1,317. 1,361. 1,558. 1,743. 1,876.

Order Code

Example: MP2-4230-15-W210/20








Application Notes







Morrison

18

Panels42�H glazed



Order Code




Specification Notes


Frame finish

Application Notes




Morrison

19

Pan

elP

lann

ing



Combination Veneer 1/upholstery 18� 21/4� 42� MP2-4218-( )-( ) $1,019. $1,043. $1,053. $1,116. $1,173. $1,211.24� 21/4� 42� MP2-4224-( )-( ) 1,098. 1,145. 1,157. 1,224. 1,270. 1,316.30� 21/4� 42� MP2-4230-( )-( ) 1,227. 1,264. 1,277. 1,344. 1,395. 1,455.36� 21/4� 42� MP2-4236-( )-( ) 1,348. 1,393. 1,411. 1,486. 1,552. 1,614.42� 21/4� 42� MP2-4242-( )-( ) 1,554. 1,611. 1,627. 1,721. 1,820. 1,878.48� 21/4� 42� MP2-4248-( )-( ) 1,757. 1,821. 1,841. 1,954. 2,050. 2,124.


Order Code

Example: MP2-4230-Y811-15-W210/20



When specifying combinationpanels, follow panel size withveneer finish code, then upholsteryfinish code and pattern number.


Application Notes




Morrison

20




Order Code





Veneer finish

Application Notes




Morrison

21

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 48� MP2-4818-( ) $715. $788. $811. $935. $1,076. $1,145.24� 21/4� 48� MP2-4824-( ) 784. 902. 934. 1,068. 1,174. 1,279.30� 21/4� 48� MP2-4830-( ) 884. 989. 1,018. 1,169. 1,279. 1,420.36� 21/4� 48� MP2-4836-( ) 986. 1,107. 1,137. 1,308. 1,447. 1,587.42� 21/4� 48� MP2-4842-( ) 1,116. 1,241. 1,279. 1,472. 1,614. 1,787.48� 21/4� 48� MP2-4848-( ) 1,216. 1,360. 1,395. 1,601. 1,821. 1,954.60� 21/4� 48� MP2-4860-( ) 1,361. 1,585. 1,630. 1,868. 2,091. 2,253.

Options panels, upholstered both sides 18� 21/4� 48� MP2-4818N( ) 673. 725. 741. 859. 990. 1,050.24� 21/4� 48� MP2-4824N( ) 736. 827. 850. 978. 1,081. 1,173.30� 21/4� 48� MP2-4830N( ) 829. 903. 935. 1,072. 1,173. 1,306.36� 21/4� 48� MP2-4836N( ) 922. 1,012. 1,040. 1,190. 1,328. 1,452.42� 21/4� 48� MP2-4842N( ) 1,043. 1,142. 1,173. 1,345. 1,483. 1,639.48� 21/4� 48� MP2-4848N( ) 1,142. 1,241. 1,279. 1,472. 1,669. 1,790.60� 21/4� 48� MP2-4860N( ) 1,274. 1,451. 1,492. 1,713. 1,919. 2,063.

Order Code

Example: MP2-4830-15-W210/20







For combinations of fabrics list bothsuffixes (e.g., 15/40) and upholsterypattern numbers.

Application Notes






Morrison

22

Panels48�H glazed



Order Code





Frame finish

Application Notes




Morrison

23

Pan

elP

lann

ing





Order Code

Example: MP2-4830-Y811-15-W210/20





Application Notes




Morrison

24




Order Code





Veneer finish

Application Notes




Morrison

25

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 56� MP2-5618-( ) $741. $878. $901. $1,037. $1,136. $1,227.24� 21/4� 56� MP2-5624-( ) 859. 973. 1,004. 1,154. 1,289. 1,408.30� 21/4� 56� MP2-5630-( ) 953. 1,107. 1,142. 1,309. 1,437. 1,560.36� 21/4� 56� MP2-5636-( ) 1,040. 1,214. 1,241. 1,424. 1,623. 1,747.42� 21/4� 56� MP2-5642-( ) 1,125. 1,312. 1,345. 1,542. 1,747. 1,897.48� 21/4� 56� MP2-5648-( ) 1,220. 1,436. 1,483. 1,701. 1,897. 2,050.60� 21/4� 56� MP2-5660-( ) 1,393. 1,650. 1,697. 1,942. 2,173. 2,347.

Options panels, upholstered both sides 18� 21/4� 56� MP2-5618N( ) 702. 804. 826. 950. 1,039. 1,123.24� 21/4� 56� MP2-5624N( ) 805. 893. 921. 1,055. 1,178. 1,290.30� 21/4� 56� MP2-5630N( ) 898. 1,012. 1,041. 1,194. 1,318. 1,428.36� 21/4� 56� MP2-5636N( ) 978. 1,109. 1,142. 1,308. 1,490. 1,604.42� 21/4� 56� MP2-5642N( ) 1,061. 1,205. 1,231. 1,421. 1,604. 1,743.48� 21/4� 56� MP2-5648N( ) 1,145. 1,317. 1,361. 1,558. 1,743. 1,878.60� 21/4� 56� MP2-5660N( ) 1,312. 1,509. 1,552. 1,781. 1,994. 2,157.

Order Code

Example: MP2-5630-15-W210/20




Surface type/finish suffixesUpholstered panels:




Application Notes






Morrison

26

Panels56�H glazed



Order Code





Frame finish

Panel stiffeners should be specifiedwith glazed panels in straight orcorner configurations. See page 42 .

Application Notes




Morrison

27

Pan

elP

lann

ing





Order Code

Example: MP2-5630-Y811-15-W210/20

MP2 Panel56 Height30 WidthY811 Veneer finish15 Fabric group no.W210/20 Upholstery



Surface type/finish suffixesFor upholstered panels, specifyupholstery pattern number after thefabric group number.

10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45


Application Notes



Morrison

28



Veneer both sides 18� 21/4� 56� MP2-5618-V( ) $1,408. $1,691.24� 21/4� 56� MP2-5624-V( ) 1,500. 1,803.30� 21/4� 56� MP2-5630-V( ) 1,661. 1,997.36� 21/4� 56� MP2-5636-V( ) 1,856. 2,225.42� 21/4� 56� MP2-5642-V( ) 2,109. 2,530.48� 21/4� 56� MP2-5648-V( ) 2,366. 2,846.





Veneer finish


Application Notes



Morrison

29

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 64� MP2-6418-( ) $804. $928. $954. $1,088. $1,289. $1,408.24� 21/4� 64� MP2-6424-( ) 893. 1,032. 1,057. 1,219. 1,408. 1,535.30� 21/4� 64� MP2-6430-( ) 1,012. 1,157. 1,183. 1,368. 1,560. 1,690.36� 21/4� 64� MP2-6436-( ) 1,105. 1,261. 1,306. 1,486. 1,713. 1,837.42� 21/4� 64� MP2-6442-( ) 1,185. 1,388. 1,428. 1,642. 1,837. 1,990.48� 21/4� 64� MP2-6448-( ) 1,277. 1,490. 1,535. 1,757. 1,990. 2,173.60� 21/4� 64� MP2-6460-( ) 1,490. 1,697. 1,743. 1,999. 2,328. 2,508.

Options panels, upholstered both sides 18� 21/4� 64� MP2-6418N( ) 756. 847. 878. 1,002. 1,178. 1,290.24� 21/4� 64� MP2-6424N( ) 835. 943. 966. 1,116. 1,290. 1,404.30� 21/4� 64� MP2-6430N( ) 953. 1,061. 1,090. 1,260. 1,428. 1,542.36� 21/4� 64� MP2-6436N( ) 1,038. 1,154. 1,187. 1,363. 1,571. 1,686.42� 21/4� 64� MP2-6442N( ) 1,119. 1,273. 1,312. 1,500. 1,686. 1,825.48� 21/4� 64� MP2-6448N( ) 1,205. 1,365. 1,404. 1,612. 1,825. 1,994.60� 21/4� 64� MP2-6460N( ) 1,395. 1,552. 1,596. 1,835. 2,129. 2,305.

Order Code

Example: MP2-6430-15-W210/20

MP2 Panel64 Height30 Width15 Surface typeW210/20 Upholstery






Application Notes






Morrison

30

Panels64�H glazed


Glazed panels 18� 21/4� 64� MP2-6418-C/T( ) $1,789.24� 21/4� 64� MP2-6424-C/T( ) 2,010.30� 21/4� 64� MP2-6430-C/T( ) 2,206.36� 21/4� 64� MP2-6436-C/T( ) 2,430.42� 21/4� 64� MP2-6442-C/T( ) 2,623.48� 21/4� 64� MP2-6448-C/T( ) 2,902.

Order Code





For glazed panels specify:C- Clear tempered glasscT- Acid etched tempered glass

Frame finish

Panel stiffeners should be specifiedwith glazed panels in all straight orcorner configurations. See page 42

Application Notes




Morrison

31

Pan

elP

lann

ing





Order Code

Example: MP2-6430-Y811-15-W210/20







Application Notes



Morrison

32




Order Code





Veneer finish


Application Notes



Morrison

33

Pan

elP

lann

ing



High performance panels, upholstered both sides 18� 21/4� 80� MP2-8018-( ) $1,149. $1,361. $1,393. $1,601. $1,821. $1,954.24� 21/4� 80� MP2-8024-( ) 1,238. 1,497. 1,540. 1,768. 1,954. 2,091.30� 21/4� 80� MP2-8030-( ) 1,376. 1,613. 1,658. 1,902. 2,091. 2,260.36� 21/4� 80� MP2-8036-( ) 1,475. 1,722. 1,775. 2,034. 2,260. 2,492.42� 21/4� 80� MP2-8042-( ) 1,571. 1,838. 1,891. 2,172. 2,430. 2,662.48� 21/4� 80� MP2-8048-( ) 1,663. 1,980. 2,035. 2,338. 2,630. 2,827.

Options panels, upholstered both sides 18� 21/4� 80� MP2-8018-N( ) 1,076. 1,241. 1,279. 1,473. 1,669. 1,790.24� 21/4� 80� MP2-8024-N( ) 1,168. 1,376. 1,416. 1,620. 1,790. 1,919.30� 21/4� 80� MP2-8030-N( ) 1,292. 1,481. 1,523. 1,747. 1,919. 2,063.36� 21/4� 80� MP2-8036-N( ) 1,387. 1,584. 1,626. 1,865. 2,063. 2,285.42� 21/4� 80� MP2-8042-N( ) 1,476. 1,686. 1,732. 1,990. 2,218. 2,441.48� 21/4� 80� MP2-8048-N( ) 1,569. 1,819. 1,868. 2,138. 2,410. 2,593.

Order Code

Example: MP2-8030-15-W210/20








Application Notes






Morrison

34

Panels80�H glazed



Order Code





Frame finish

Panel stiffeners should be specifiedwith glazed panels in all straight orcorner configurations. See page 42.

60�W panels are not available.

Application Notes




Morrison

35

Pan

elP

lann

ing





Order Code

Example: MP2-8030-Y811-15-W210/20







Application Notes



Morrison

36




Order Code





Veneer finishes


Application Notes



Morrison

37

Pan

elP

lann

ing

Panelsported panel39�, 42� and 48� H

description type w d h pattern no. 10 15 20 30 40 45

Ported panels, upholstered both sides 39�H 18� 21/4� 39� MP2-3918-P( ) $774. $859. $876. $1,010. $1,161. $1,235.24� 21/4� 39� MP2-3924-P( ) 847. 973. 1,006. 1,156. 1,272. 1,381.30� 21/4� 39� MP2-3930-P( ) 954. 1,067. 1,101. 1,262. 1,381. 1,534.36� 21/4� 39� MP2-3936-P( ) 1,057. 1,187. 1,229. 1,401. 1,569. 1,709.42� 21/4� 39� MP2-3942-P( ) 1,206. 1,344. 1,381. 1,587. 1,746. 1,929.48� 21/4� 39� MP2-3948-P( ) 1,310. 1,470. 1,505. 1,729. 1,971. 2,109.

42�H 18� 21/4� 42� MP2-4218-P( ) 816. 902. 922. 1,061. 1,226. 1,307.24� 21/4� 42� MP2-4224-P( ) 893. 1,032. 1,057. 1,216. 1,343. 1,452.30� 21/4� 42� MP2-4230-P( ) 1,005. 1,121. 1,158. 1,328. 1,452. 1,612.36� 21/4� 42� MP2-4236-P( ) 1,116. 1,259. 1,292. 1,481. 1,645. 1,796.42� 21/4� 42� MP2-4242-P( ) 1,268. 1,412. 1,452. 1,666. 1,836. 2,031.48� 21/4� 42� MP2-4248-P( ) 1,379. 1,541. 1,588. 1,821. 2,073. 2,218.

48�H 18� 21/4� 48� MP2-4818-P( ) 899. 990. 1,012. 1,169. 1,345. 1,434.24� 21/4� 48� MP2-4824-P( ) 986. 1,125. 1,168. 1,337. 1,476. 1,597.30� 21/4� 48� MP2-4830-P( ) 1,105. 1,231. 1,272. 1,455. 1,597. 1,773.36� 21/4� 48� MP2-4836-P( ) 1,227. 1,381. 1,424. 1,630. 1,814. 1,981.42� 21/4� 48� MP2-4842-P( ) 1,390. 1,553. 1,597. 1,836. 2,021. 2,239.48� 21/4� 48� MP2-4848-P( ) 1,519. 1,697. 1,747. 2,002. 2,276. 2,441.

Order Code

Example: MP2-3918-P-15-W210/20

MP2 Panel39 Height18 WidthP Ported panel15 Fabric groupW210/20 Upholstery




Ported panels are upholstered bothsides and may be upholstered withtextiles approved for application onReff panels only.For combination of fabrics list bothsuffixes and upholstery patternnumbers. List price is the average ofthe two fabric grades.

Application Notes


Vertical duplexes, power and dataports and connectors are specifiedseparately.

Morrison

38

Panelsported panel56�, 64� and 80� H


Ported panels, upholstered both sides 56�H 18� 21/4� 56� MP2-5618-P( ) $932. $1,092. $1,124. $1,292. $1,423. $1,535.24� 21/4� 56� MP2-5624-P( ) 1,070. 1,219. 1,259. 1,439. 1,612. 1,762.30� 21/4� 56� MP2-5630-P( ) 1,187. 1,381. 1,426. 1,635. 1,796. 1,953.36� 21/4� 56� MP2-5636-P( ) 1,307. 1,514. 1,553. 1,778. 2,031. 2,182.42� 21/4� 56� MP2-5642-P( ) 1,411. 1,642. 1,686. 1,931. 2,182. 2,377.48� 21/4� 56� MP2-5648-P( ) 1,523. 1,795. 1,848. 2,124. 2,377. 2,559.

64�H 18� 21/4� 64� MP2-6418-P( ) 1,005. 1,158. 1,190. 1,362. 1,612. 1,762.24� 21/4� 64� MP2-6424-P( ) 1,116. 1,284. 1,321. 1,520. 1,762. 1,921.30� 21/4� 64� MP2-6430-P( ) 1,268. 1,443. 1,486. 1,709. 1,953. 2,107.36� 21/4� 64� MP2-6436-P( ) 1,379. 1,579. 1,626. 1,858. 2,143. 2,299.42� 21/4� 64� MP2-6442-P( ) 1,488. 1,732. 1,787. 2,050. 2,299. 2,490.48� 21/4� 64� MP2-6448-P( ) 1,596. 1,863. 1,921. 2,194. 2,490. 2,715.

80�H 18� 21/4� 80� MP2-8018-P( ) 1,435. 1,700. 1,746. 2,002. 2,276. 2,441.24� 21/4� 80� MP2-8024-P( ) 1,552. 1,872. 1,929. 2,209. 2,441. 2,611.30� 21/4� 80� MP2-8030-P( ) 1,721. 2,019. 2,076. 2,382. 2,611. 2,821.36� 21/4� 80� MP2-8036-P( ) 1,839. 2,152. 2,213. 2,539. 2,821. 3,118.42� 21/4� 80� MP2-8042-P( ) 1,969. 2,300. 2,364. 2,713. 3,034. 3,330.48� 21/4� 80� MP2-8048-P( ) 2,080. 2,476. 2,543. 2,923. 3,285. 3,537.

Order Code

Example: MP2-6418-P-15-W210/20

MP2 Panel64 Height18 WidthP Ported panel15 Fabric groupW210/20 Upholstery




Ported panels are upholstered bothsides and may be upholstered withtextiles approved for application onReff panels only.For combination of fabrics list bothsuffixes and upholstery patternnumbers. List price is the average ofthe two fabric grades.

Application Notes


Vertical duplexes, power and dataports and connectors are specifiedseparately.

Morrison

39

Pan

elP

lann

ing

Panelscombination upholstered/markerboard


Combination upholstered/markerboard 48�H 24� 2� 48� MP2-4824-M-( ) $1,006. $1,066. $1,081. $1,149. $1,205. $1,259.30� 2� 48� MP2-4830-M-( ) 1,114. 1,165. 1,176. 1,260. 1,312. 1,379.36� 2� 48� MP2-4836-M-( ) 1,235. 1,306. 1,316. 1,396. 1,475. 1,540.42� 2� 48� MP2-4842-M-( ) 1,393. 1,455. 1,481. 1,571. 1,645. 1,729.48� 2� 48� MP2-4848-M-( ) 1,541. 1,613. 1,638. 1,733. 1,843. 1,916.

56�H 24� 2� 56� MP2-5624-M-( ) 1,066. 1,121. 1,136. 1,214. 1,277. 1,338.30� 2� 56� MP2-5630-M-( ) 1,169. 1,241. 1,264. 1,344. 1,412. 1,473.36� 2� 56� MP2-5636-M-( ) 1,306. 1,382. 1,396. 1,490. 1,589. 1,652.42� 2� 56� MP2-5642-M-( ) 1,439. 1,535. 1,552. 1,652. 1,750. 1,826.48� 2� 56� MP2-5648-M-( ) 1,588. 1,700. 1,721. 1,826. 1,930. 2,002.



Order Code

Example: MP2-6436-M-15-W210/2

MP2 Panel64 Height36 WidthM Markerboard15 Fabric groupW210/2 Upholstery


When specifying combinationpanels, follow panel size withmarkerboard code, then theupholstery finish code and patternnumber.

Surface type/finish suffixes:M- Markerboard surface10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes

Top caps/raceway covers arespecified as separate kits, and arebulk packed to facilitateinstallation.


Markerboard surface isnon-metallic.

Morrison

40

Panelsmarkerboard both sides

description type w d h pattern no.markerboard

both sides

Markerboard both sides 48�H 24� 2� 48� MP2-4824-M $1,226.30� 2� 48� MP2-4830-M 1,342.36� 2� 48� MP2-4836-M 1,492.42� 2� 48� MP2-4842-M 1,673.48� 2� 48� MP2-4848-M 1,869.

56�H 24� 2� 56� MP2-5624-M 1,268.30� 2� 56� MP2-5630-M 1,381.36� 2� 56� MP2-5636-M 1,554.42� 2� 56� MP2-5642-M 1,757.48� 2� 56� MP2-5648-M 1,956.



Order Code

Example: MP2-6436-M

MP2 Panel64 Height36 WidthM Markerboard


For markerboard surface on bothsides, no finish code is required.

Surface type/finish suffixes:M- Markerboard surface

Application Notes

Top caps/raceway covers arespecified as separate kits, and arebulk packed to facilitateinstallation.



Morrison

41

Pan

elP

lann

ing

Doorsrolling door

description type w d h pattern no. paint RC C T

Rolling door 64�H with lock 36� 2� 64� MRD-6436-(L/R)-( )-( )-L $4,083. $4,256. $4,590.42� 2� 64� MRD-6442-(L/R)-( )-( )-L 4,236. 4,461. 4,838.48� 2� 64� MRD-6448-(L/R)-( )-( )-L 4,290. 4,513. 4,888.

64�H no lock 36� 2� 64� MRD-6436-(L/R)-( )-( )-N 3,785. 3,967. 4,299.42� 2� 64� MRD-6442-(L/R)-( )-( )-N 3,943. 4,164. 4,544.48� 2� 64� MRD-6448-(L/R)-( )-( )-N 3,998. 4,217. 4,601.

80�H with lock 36� 2� 80� MRD-8036-(L/R)-( )-( )-L 4,305. 4,798. 5,299.42� 2� 80� MRD-8042-(L/R)-( )-( )-L 4,475. 4,838. 5,324.48� 2� 80� MRD-8048-(L/R)-( )-( )-L 4,549. 4,890. 5,396.

80�H no lock 36� 2� 80� MRD-8036-(L/R)-( )-( )-N 4,009. 4,500. 5,007.42� 2� 80� MRD-8042-(L/R)-( )-( )-N 4,181. 4,544. 5,027.48� 2� 80� MRD-8048-(L/R)-( )-( )-N 4,255. 4,602. 5,104.

Threshold for rolling door 36� door 731/4� 3� 3/8� MRD-FT36 312.42� door 851/4� 3� 3/8� MRD-FT42 327.48� door 971/4� 3� 3/8� MRD-FT48 353.

Panel stiffeners for 80�H doors 90° 2-way L MM1-DSL2 70.In-line post MM1-DSP1 70.Straight MM1-DSS1 70.

Masts for doors (set of 2) AY1-DMK 58.

Post trim covers for 64�H door 90° 2-way L 21/4� – 64� MT1-64XL2-( ) 107.90° 3-way T 21/4� – 64� MT1-64XT3-( ) 79.


Order Code

Example: MRD-6436-L-C-613-N

M MorrisonRD Rolling door64 Height36 WidthL LeftC Door finish613 Frame finishN No lock


Specify:

Left / Right Hand

Glazing for rolling door:C- Clear AcrylicT- Translucent AcrylicRC- Ribbed polycarbonate

Frame finish

Lock / No Lock

Rolling doors mount to the outsideof Morrison workstations.

Application Notes

64�H rolling door kit includes doorpanel, post with mounting bracket,and door jamb (for door sideopposite to mounting bracket).Specify post high-low top cap (seepage ) for Morrison panel adjacentto the door jamb.

80�H rolling door kit includes doorpanel, post with mounting bracket,door jamb (for door side opposite tomounting bracket), header, top capfor header and two corner brackets.Top caps for panels adjacent to 80�rolling doors must be modified inthe field. Header for 80� doormounts with two corner brackets.

Specify separately straightconnector tracks to connect doorpost and door jamb to adjacentpanels.

A full threshold may be specifiedseparately. A threshold is requiredto assure the ADA requirement formaximum pull force of 5 lbs. is met.

Rolling door post with mountingbracket must attach to a Morrisonpanel, or panel run, of width equalor greater than the nominal width ofthe door. When fully open, the doorwill extend 13/16� (half the width of auniversal post) beyond a panel ofcorresponding width.

Door jamb may be attached to aMorrison panel or to a universalpost. When attaching to a post,specify separately dedicatedvertical trims for 90° 2-way L or3-way T connections.

Masts for doors combine with panelstiffeners for 80� doors to mountstackable add-up panels overMorrison doors.

Morrison

42

Doorshinged door

description type w d h pattern no. laminate paint V1 V2

Hinged door with frame

left hand shown

no lock 36� 2� 80� MHD-8036-(L/R)-(P/L/V)-( )-( )-N $3,286. $3,611. $4,252. $5,094.42� 2� 80� MHD-8042-(L/R)-(P/L/V)-( )-( )-N 3,475. 3,721. 4,650. 5,576.

with lock 36� 2� 80� MHD-8036-(L/R)-(P/L/V)-( )-( )-L 4,428. 4,751. 5,391. 6,236.42� 2� 80� MHD-8042-(L/R)-(P/L/V)-( )-( )-L 4,610. 4,865. 5,790. 6,715.

Panel stiffeners for 80�H doors 90° 2-way L MM1-DSL2 70.In-line post MM1-DSP1 70.Straight MM1-DSS1 70.


Masts for doors (set of 2) AY1-DMK 58.

Order Code

Example: MHD-8042-L-V-Y811-613-L

M MorrisonHD Hinged door80 Height42 WidthL LeftV VeneerY811 Door finish613 Frame finishL With lock


Specify:

Left / Right hand.

Door Panel finish type:P PaintL LaminateV Veneer

Door panel finish

Frame finish

Lock/ No lock

Application Notes

Specify separately two straightconnector tracks to connect door toadjacent panels or posts. Whenattaching to a post, specifyseparately dedicated vertical trimsfor 90° 2-way L or 3-way Tconnections.

Hinged door with no lock isintended to allow specifiers to usenon-Knoll hardware to match otherarchitectural details. Lock andhandle are not included and must bepurchased separately from anon-Knoll source. Hinged door withno lock is a solid panel. It is notdrilled for lock and handleassembly. Lock and handle,purchased separately, must be fielddrilled and installed.

Masts for doors combine with panelstiffeners for 80� doors to mountstackable add-up panels overMorrison doors.

Morrison

43

Pan

elP

lann

ing

Windows9�, 16�, 18�, 22� and 32�H

description w d h pattern no. C T

Windows, 9�H 18� 21/4� 9� MP3-W0918-C/T-( ) $628. $708.24� 21/4� 9� MP3-W0924-C/T-( ) 708. 787.30� 21/4� 9� MP3-W0930-C/T-( ) 787. 868.36� 21/4� 9� MP3-W0936-C/T-( ) 868. 973.42� 21/4� 9� MP3-W0942-C/T-( ) 947. 1,051.48� 21/4� 9� MP3-W0948-C/T-( ) 1,028. 1,158.60� 21/4� 9� MP3-W0960-C/T-( ) 1,178. 1,344.

Windows, 16�H 18� 21/4� 16� MP3-W1618-C/T-( ) 669. 750.24� 21/4� 16� MP3-W1624-C/T-( ) 750. 830.30� 21/4� 16� MP3-W1630-C/T-( ) 830. 917.36� 21/4� 16� MP3-W1636-C/T-( ) 917. 1,028.42� 21/4� 16� MP3-W1642-C/T-( ) 997. 1,108.48� 21/4� 16� MP3-W1648-C/T-( ) 1,081. 1,222.60� 21/4� 16� MP3-W1660-C/T-( ) 1,241. 1,416.

Windows, 18�H 18� 21/4� 18� MP3-W1818-C/T-( ) 693. 776.24� 21/4� 18� MP3-W1824-C/T-( ) 776. 865.30� 21/4� 18� MP3-W1830-C/T-( ) 865. 951.36� 21/4� 18� MP3-W1836-C/T-( ) 951. 1,067.42� 21/4� 18� MP3-W1842-C/T-( ) 1,037. 1,153.48� 21/4� 18� MP3-W1848-C/T-( ) 1,123. 1,270.60� 21/4� 18� MP3-W1860-C/T-( ) 1,297. 1,475.

Windows, 22�H 18� 21/4� 22� MP3-W2218-C/T-( ) 741. 830.24� 21/4� 22� MP3-W2224-C/T-( ) 830. 922.30� 21/4� 22� MP3-W2230-C/T-( ) 922. 1,014.36� 21/4� 22� MP3-W2236-C/T-( ) 1,014. 1,142.42� 21/4� 22� MP3-W2242-C/T-( ) 1,108. 1,229.48� 21/4� 22� MP3-W2248-C/T-( ) 1,206. 1,359.60� 21/4� 22� MP3-W2260-C/T-( ) 1,389. 1,569.

Order Code

Example: MP3-W2230-C-613

MP3 PanelW Window22 Height30 WidthC Window finish613 Frame finish


Specify glazing for windows:C- Clear tempered glassT- Acid etched tempered glass

Frame finish

Application Notes

Windows mount on any heightMorrison vertical panel of the samewidth with add-on connectors or fullheight connectors.

All windows are1/4� less thannominal height to allow for a1/4�horizontal reveal with light seal.

9�H windows may be mounted on30�H and 39�H vertical panels andconnected, respectively, withstandard 39�H and 48�H connectortracks and post assemblies.



22�H windows may be mounted on42�H vertical panels and connectedwith standard 64�H connectortracks and post assemblies.


Full height 48� and 64� connectorspermit cantilevered shelves andoverhead cabinets.

Two 16�H windows may be mountedon a 48�H upholstered panel onlywhen using 80�H full heightconnector tracks and postassemblies.

Morrison

44

Windows9�, 16�, 18�, 22� and 32�H

description w d h pattern no. C T

Windows, 32�H 18� 21/4� 32� MP3-W3218-C/T-( ) $1,076. $1,210.24� 21/4� 32� MP3-W3224-C/T-( ) 1,210. 1,338.30� 21/4� 32� MP3-W3230-C/T-( ) 1,338. 1,475.36� 21/4� 32� MP3-W3236-C/T-( ) 1,475. 1,653.42� 21/4� 32� MP3-W3242-C/T-( ) 1,606. 1,787.48� 21/4� 32� MP3-W3248-C/T-( ) 1,746. 1,962.60� 21/4� 32� MP3-W3260-C/T-( ) 2,019. 2,272.

Order Code

Example: MP3-W2230-C-613

MP3 PanelW Window22 Height30 WidthC Window finish613 Frame finish


Specify glazing for windows:C- Clear tempered glassT- Acid etched tempered glass

Frame finish

Application Notes

Windows mount on any heightMorrison vertical panel of the samewidth with add-on connectors or fullheight connectors.

All windows are1/4� less thannominal height to allow for a1/4�horizontal reveal with light seal.







Two 16�H windows may be mountedon a 48�H upholstered panel onlywhen using 80�H full heightconnector tracks and postassemblies.

Morrison

45

Pan

elP

lann

ing

Markerboard and combination add-on panels16�, 18�, 22� and 32�H

description w d h pattern no.combination

10 15 20 30 40 45marker

both sides

16�H 24� 2� 16� MP3-A1624-M( ) $673. $708. $713. $761. $816. $847. $816.30� 2� 16� MP3-A1630-M( ) 752. 787. 799. 847. 912. 950. 901.36� 2� 16� MP3-A1636-M( ) 830. 878. 886. 941. 1,010. 1,053. 998.42� 2� 16� MP3-A1642-M( ) 932. 978. 992. 1,055. 1,136. 1,178. 1,101.48� 2� 16� MP3-A1648-M( ) 1,034. 1,085. 1,098. 1,168. 1,258. 1,307. 1,233.

18�H 24� 2� 18� MP3-A1824-M( ) 707. 741. 755. 798. 850. 888. 860.30� 2� 18� MP3-A1830-M( ) 784. 827. 833. 890. 953. 992. 947.36� 2� 18� MP3-A1836-M( ) 871. 917. 928. 989. 1,057. 1,101. 1,050.42� 2� 18� MP3-A1842-M( ) 972. 1,024. 1,038. 1,107. 1,183. 1,233. 1,157.48� 2� 18� MP3-A1848-M( ) 1,081. 1,136. 1,153. 1,224. 1,310. 1,363. 1,307.

22�H 24� 2� 22� MP3-A2224-M( ) 752. 784. 798. 844. 905. 943. 905.30� 2� 22� MP3-A2230-M( ) 831. 878. 888. 943. 1,010. 1,053. 998.36� 2� 22� MP3-A2236-M( ) 922. 972. 987. 1,041. 1,121. 1,169. 1,107.42� 2� 22� MP3-A2242-M( ) 1,034. 1,085. 1,098. 1,170. 1,262. 1,312. 1,220.48� 2� 22� MP3-A2248-M( ) 1,143. 1,206. 1,220. 1,293. 1,388. 1,443. 1,372.

32�H 24� 2� 32� MP3-A3224-M( ) 843. 893. 903. 960. 1,006. 1,050. 1,034.30� 2� 32� MP3-A3230-M( ) 935. 978. 992. 1,053. 1,101. 1,157. 1,127.36� 2� 32� MP3-A3236-M( ) 1,038. 1,088. 1,105. 1,170. 1,231. 1,290. 1,260.42� 2� 32� MP3-A3242-M( ) 1,157. 1,214. 1,227. 1,308. 1,365. 1,436. 1,382.48� 2� 32� MP3-A3248-M( ) 1,283. 1,344. 1,435. 1,445. 1,537. 1,594. 1,558.

Order Code

Example: MP3-A1636-M15-W210/20

MP3 PanelA Add-on16 Height36 WidthM Markerboard15 Surface type and group



Surface type/finish suffixes:

For markerboard surface on bothsides, follow add-on panel size withfinish code M.

When specifying combinationpanels, follow add-on panel sizewith markerboard code, thenupholstery finish code and patternnumber.M- Markerboard surface10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes

Add-on panels mount on any heightMorrison vertical panel of the samewidth with add-on connectors or fullheight connectors.

All add-on panels are1/4� less thannominal height to allow for a1/4�horizontal reveal with light seal.

16�H add-on panels may bemounted on 48�H and 74�H verticalpanels and connected, respectively,with standard 64�H and 80�connector tracks and postassemblies.


22�H add-on panels may bemounted on 42�H vertical panelsand connected with standard 64�Hconnector tracks and postassemblies.


Full height 48� and 64� connectorspermit cantilevered shelves andoverhead cabinets. Add-on panelsmay also span two lower panels ofthe same total width.


Morrison

46

Upholstered add-on panels16�, 18�, 22� and 32�H


Add-on panels, upholstered, 16�H 18� 21/4� 16� MP3-A1618-( ) $486. $554. $572. $658. $759. $819.24� 21/4� 16� MP3-A1624-( ) 533. 602. 618. 706. 816. 883.30� 21/4� 16� MP3-A1630-( ) 602. 678. 697. 799. 922. 997.36� 21/4� 16� MP3-A1636-( ) 668. 755. 772. 886. 1,028. 1,108.42� 21/4� 16� MP3-A1642-( ) 757. 850. 883. 1,010. 1,169. 1,264.48� 21/4� 16� MP3-A1648-( ) 826. 934. 958. 1,092. 1,267. 1,368.60� 21/4� 16� MP3-A1660-( ) 954. 1,076. 1,114. 1,270. 1,470. 1,587.

Add-on panels, upholstered, 18�H 18� 21/4� 18� MP3-A1818-( ) 506. 574. 598. 685. 787. 849.24� 21/4� 18� MP3-A1824-( ) 553. 622. 641. 732. 845. 917.30� 21/4� 18� MP3-A1830-( ) 622. 707. 725. 830. 957. 1,037.36� 21/4� 18� MP3-A1836-( ) 692. 781. 804. 921. 1,067. 1,153.42� 21/4� 18� MP3-A1842-( ) 784. 888. 917. 1,051. 1,219. 1,313.48� 21/4� 18� MP3-A1848-( ) 859. 966. 998. 1,142. 1,316. 1,424.60� 21/4� 18� MP3-A1860-( ) 994. 1,121. 1,157. 1,318. 1,526. 1,650.

Add-on panels, upholstered, 22�H 18� 21/4� 22� MP3-A2218-( ) 549. 618. 638. 731. 843. 906.24� 21/4� 22� MP3-A2224-( ) 595. 669. 686. 783. 905. 978.30� 21/4� 22� MP3-A2230-( ) 669. 756. 774. 888. 1,028. 1,108.36� 21/4� 22� MP3-A2236-( ) 737. 833. 860. 987. 1,137. 1,228.42� 21/4� 22� MP3-A2242-( ) 836. 951. 978. 1,123. 1,306. 1,401.48� 21/4� 22� MP3-A2248-( ) 917. 1,037. 1,067. 1,222. 1,408. 1,519.60� 21/4� 22� MP3-A2260-( ) 1,061. 1,194. 1,231. 1,412. 1,630. 1,758.

Add-on panels, upholstered, 32�H 18� 21/4� 32� MP3-A3218-( ) 602. 661. 676. 780. 901. 954.24� 21/4� 32� MP3-A3224-( ) 657. 755. 776. 893. 987. 1,068.30� 21/4� 32� MP3-A3230-( ) 736. 826. 847. 976. 1,068. 1,178.36� 21/4� 32� MP3-A3236-( ) 819. 921. 950. 1,086. 1,214. 1,319.42� 21/4� 32� MP3-A3242-( ) 932. 1,038. 1,068. 1,226. 1,345. 1,490.48� 21/4� 32� MP3-A3248-( ) 1,012. 1,127. 1,313. 1,338. 1,519. 1,630.60� 21/4� 32� MP3-A3260-( ) 1,171. 1,318. 1,362. 1,560. 1,743. 1,878.

Order Code

Example: MP3-A2230-15-W210/20

MP3 PanelA Add-on22 Height30 Width15 Surface type and group





Upholstered add-on panels may beordered in a combination of fabrics.List price is the average of the twofabric grades.


Application Notes



16�H add-on panels may bemounted on 48�H and 64�H verticalpanels and connected, respectively,with standard 64�H and 80�Hconnector tracks and postassemblies.





Upholstered panel ratings are highperformance acoustical:NRC .80, STC 24 - acoustic rating.

Two 16�H add-on panels may bemounted on a 48�H upholsteredpanel only when using 80�H fullheight connector track and postassemblies.

Morrison

47

Pan

elP

lann

ing

Upholstered Options add-on panels16�, 18�, 22� and 32�H


Options add-on panels, upholstered, 16�H 18� 21/4� 16� MP3-A1618N-( ) $460. $504. $522. $602. $692. $750.24� 21/4� 16� MP3-A1624N-( ) 498. 549. 558. 641. 747. 801.30� 21/4� 16� MP3-A1630N-( ) 563. 619. 628. 725. 836. 905.36� 21/4� 16� MP3-A1636N-( ) 622. 685. 705. 805. 935. 1,006.42� 21/4� 16� MP3-A1642N-( ) 709. 776. 801. 921. 1,066. 1,149.48� 21/4� 16� MP3-A1648N-( ) 774. 845. 876. 998. 1,153. 1,241.60� 21/4� 16� MP3-A1660N-( ) 901. 986. 1,010. 1,156. 1,337. 1,439.

Options add-on panels, upholstered, 18�H 18� 21/4� 18� MP3-A1818N-( ) 478. 530. 543. 621. 715. 774.24� 21/4� 18� MP3-A1824N-( ) 522. 570. 582. 669. 770. 831.30� 21/4� 18� MP3-A1830N-( ) 593. 646. 661. 757. 871. 941.36� 21/4� 18� MP3-A1836N-( ) 652. 709. 731. 835. 966. 1,043.42� 21/4� 18� MP3-A1842N-( ) 737. 810. 831. 957. 1,107. 1,194.48� 21/4� 18� MP3-A1848N-( ) 805. 884. 906. 1,038. 1,194. 1,293.60� 21/4� 18� MP3-A1860N-( ) 935. 1,019. 1,053. 1,205. 1,387. 1,498.

Options add-on panels, upholstered, 22�H 18� 21/4� 22� MP3-A2218N-( ) 515. 558. 579. 668. 767. 827.24� 21/4� 22� MP3-A2224N-( ) 554. 606. 622. 710. 826. 890.30� 21/4� 22� MP3-A2230N-( ) 624. 686. 706. 810. 935. 1,006.36� 21/4� 22� MP3-A2236N-( ) 696. 761. 781. 898. 1,037. 1,120.42� 21/4� 22� MP3-A2242N-( ) 787. 865. 890. 1,024. 1,178. 1,274.48� 21/4� 22� MP3-A2248N-( ) 861. 941. 966. 1,109. 1,279. 1,382.60� 21/4� 22� MP3-A2260N-( ) 998. 1,088. 1,123. 1,283. 1,484. 1,596.

Options add-on panels, upholstered, 32�H 18� 21/4� 32� MP3-A3218N-( ) 563. 603. 618. 708. 816. 868.24� 21/4� 32� MP3-A3224N-( ) 618. 685. 707. 813. 898. 972.30� 21/4� 32� MP3-A3230N-( ) 693. 752. 772. 888. 972. 1,076.36� 21/4� 32� MP3-A3236N-( ) 770. 835. 865. 990. 1,101. 1,206.42� 21/4� 32� MP3-A3242N-( ) 876. 943. 972. 1,116. 1,226. 1,360.48� 21/4� 32� MP3-A3248N-( ) 953. 1,034. 1,194. 1,220. 1,382. 1,484.60� 21/4� 32� MP3-A3260N-( ) 1,105. 1,205. 1,235. 1,421. 1,587. 1,711.

Order Code

Example: MP3-A2230-15-W210/2

MP3 PanelA Add-on22 Height30 Width15 Surface type and group





Upholstered add-on panels may beordered in a combination of fabrics.List price is the average of the twofabric grades.


Application Notes








Two 16�H add-on panels may bemounted on a 48�H upholsteredpanel only when using 80�H fullheight connector track and postassemblies.

Morrison

48

Veneer and combination add-on panelsveneer group 116�, 18�, 22� and 32�H

description w d h pattern no.combination

10 15 20 30 40 45Veneer

both sides

16�H 18� 2� 16� MP3-A1618-( )( ) $722. $756. $765. $805. $859. $888. $953.24� 2� 16� MP3-A1624-( )( ) 774. 811. 816. 861. 918. 951. 1,018.30� 2� 16� MP3-A1630-( )( ) 866. 905. 917. 963. 1,032. 1,066. 1,127.36� 2� 16� MP3-A1636-( )( ) 953. 998. 1,006. 1,066. 1,134. 1,173. 1,238.42� 2� 16� MP3-A1642-( )( ) 1,067. 1,116. 1,125. 1,190. 1,272. 1,317. 1,376.48� 2� 16� MP3-A1648-( )( ) 1,174. 1,229. 1,247. 1,313. 1,395. 1,447. 1,534.

18�H 18� 2� 18� MP3-A1818-( )( ) 757. 787. 799. 843. 899. 928. 1,004.24� 2� 18� MP3-A1824-( )( ) 813. 847. 859. 903. 958. 997. 1,072.30� 2� 18� MP3-A1830-( )( ) 906. 950. 957. 1,010. 1,073. 1,114. 1,185.36� 2� 18� MP3-A1836-( )( ) 1,002. 1,041. 1,055. 1,116. 1,183. 1,228. 1,309.42� 2� 18� MP3-A1842-( )( ) 1,119. 1,169. 1,178. 1,258. 1,335. 1,381. 1,445.48� 2� 18� MP3-A1848-( )( ) 1,231. 1,290. 1,308. 1,378. 1,464. 1,516. 1,612.

22�H 18� 2� 22� MP3-A2218-( )( ) 801. 833. 845. 898. 950. 987. 1,055.24� 2� 22� MP3-A2224-( )( ) 860. 901. 906. 957. 1,018. 1,053. 1,125.30� 2� 22� MP3-A2230-( )( ) 958. 1,005. 1,012. 1,070. 1,142. 1,176. 1,259.36� 2� 22� MP3-A2236-( )( ) 1,057. 1,107. 1,119. 1,176. 1,261. 1,307. 1,376.42� 2� 22� MP3-A2242-( )( ) 1,178. 1,233. 1,258. 1,319. 1,412. 1,464. 1,523.48� 2� 22� MP3-A2248-( )( ) 1,309. 1,365. 1,381. 1,455. 1,552. 1,611. 1,697.

32�H 18� 2� 32� MP3-A3218-( )( ) 901. 932. 939. 992. 1,050. 1,076. 1,204.24� 2� 32� MP3-A3224-( )( ) 966. 1,018. 1,034. 1,088. 1,134. 1,173. 1,281.30� 2� 32� MP3-A3230-( )( ) 1,082. 1,123. 1,137. 1,205. 1,247. 1,308. 1,424.36� 2� 32� MP3-A3236-( )( ) 1,187. 1,238. 1,260. 1,321. 1,387. 1,439. 1,564.42� 2� 32� MP3-A3242-( )( ) 1,328. 1,382. 1,396. 1,481. 1,537. 1,612. 1,729.48� 2� 32� MP3-A3248-( )( ) 1,473. 1,529. 1,620. 1,635. 1,724. 1,778. 1,929.

Order Code

Example: MP3-A2230-Y811-15-W210/20

MP3 PanelA Add-on22 Height30 WidthY811 Veneer finish15 Fabric groupW210/20 Upholstery


Surface type/finish suffixes:

When specifying combinationpanels, follow panel size withveneer finish code, the upholsteryfinish code and pattern number.Forupholstered panels, specifyupholstery pattern number after thefabric group number.

10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

To order veneer on both sides, followpanel size with suffix V- and veneerfinish code.Example: MP3-A2230-V-8.

Application Notes


All add-on panels are1/4� less thannominal height to allow for a 1/4�horizontal reveal with light seal.






Morrison

49

Pan

elP

lann

ing

Add-on connectors, post assembliesupholstered

description type w d h pattern no. no trim 10 15 20 30 40 45

Connector track No trim – – 9� MC1-A09S1 $70.- – 16� MC1-A16S1 70.- – 18� MC1-A18S1 72.- – 22� MC1-A22S1 72.- – 32� MC1-A32S1 76.

90° 2-way, ‘‘L’’ Upholstered 21/4� 21/4� 9� MC1-A09L2-( ) 244. 271. 271. 271. 291. 291.21/4� 21/4� 16� MC1-A16L2-( ) 244. 271. 271. 271. 291. 291.21/4� 21/4� 18� MC1-A18L2-( ) 247. 275. 275. 275. 298. 298.21/4� 21/4� 22� MC1-A22L2-( ) 247. 275. 275. 275. 298. 298.21/4� 21/4� 32� MC1-A32L2-( ) 262. 291. 291. 291. 313. 313.

90° 3-way, ‘‘T’’ Upholstered 21/4� 21/4� 9� MC1-A09T3-( ) 299. 325. 325. 325. 345. 372.21/4� 21/4� 16� MC1-A16T3-( ) 299. 325. 325. 325. 345. 372.21/4� 21/4� 18� MC1-A18T3-( ) 308. 335. 335. 335. 352. 380.21/4� 21/4� 22� MC1-A22T3-( ) 308. 335. 335. 335. 352. 380.21/4� 21/4� 32� MC1-A32T3-( ) 320. 353. 353. 353. 367. 396.

90° 4-way, ‘‘X’’ No trim 21/4� 21/4� 9� MC1-A09X4 330.21/4� 21/4� 16� MC1-A16X4 330.21/4� 21/4� 18� MC1-A18X4 341.21/4� 21/4� 22� MC1-A22X4 341.21/4� 21/4� 32� MC1-A32X4 362.

End Upholstered 21/4� 1� 9� MC1-A09E1-( ) 115. 132. 132. 132. 146. 172.21/4� 1� 16� MC1-A16E1-( ) 115. 132. 132. 132. 146. 172.21/4� 1� 18� MC1-A18E1-( ) 118. 134. 134. 134. 148. 176.21/4� 1� 22� MC1-A22E1-( ) 118. 134. 134. 134. 148. 176.21/4� 1� 32� MC1-A32E1-( ) 121. 141. 141. 141. 155. 185.

End Post Upholstered 21/4� 21/4� 9� MC1-A09P1-( ) 244. 271. 271. 271. 291. 291.21/4� 21/4� 16� MC1-A16P1-( ) 244. 271. 271. 271. 291. 291.21/4� 21/4� 18� MC1-A18P1-( ) 247. 275. 275. 275. 298. 298.21/4� 21/4� 22� MC1-A22P1-( ) 247. 275. 275. 275. 298. 298.21/4� 21/4� 32� MC1-A32P1-( ) 262. 291. 291. 291. 313. 313.

Order Code

Example: MC1-A16L2-15-W210/20

MC1 ConnectorA Add-on16 HeightL2 2 way ‘‘L’’15 Surface type and group



Assembly:S1- Straight connector trackL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 4-way post assemblyE1- End connector assemblyP1- End post assemblyS2 Straight post assembly

Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes

Post assembly pricing includesconnector tracks, posts, and trimcovers when required. Top caps/raceway covers are specified asseparate kits and bulk shipped tofacilitate installation.

Add-on connectors include bracketsto add panels or windows to the topof any Morrison vertical panelexcept glazed panels.

Add-on connectors must bespecified in the same height as theadd-on panel or window.

Add-on connectors do not supportcantilevered shelves or overheadcabinets. For these applications,specify full height connectors.

Add-on end post should bespecified when add-on panels endover L or T post.

2-way straight post should bespecified when add-on panelsconnect in a straight line over an Xor T post.

Morrison

50

Add-on connectors, post assembliesupholstered


180° 2-way straight post Upholstered 21/4� 21/4� 9� MC1-A09S2-( ) $299. $325. $325. $325. $345. $372.21/4� 21/4� 16� MC1-A16S2-( ) 299. 325. 325. 325. 345. 372.21/4� 21/4� 18� MC1-A18S2-( ) 308. 335. 335. 335. 352. 380.21/4� 21/4� 22� MC1-A22S2-( ) 308. 335. 335. 335. 352. 380.21/4� 21/4� 32� MC1-A32S2-( ) 320. 353. 353. 353. 367. 396.

Order Code

Example: MC1-A16L2-15-W210/20

MC1 ConnectorA Add-on16 HeightL2 2 way ‘‘L’’15 Surface type and group



Assembly:S1- Straight connector trackL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 4-way post assemblyE1- End connector assemblyP1- End post assemblyS2 Straight post assembly


Application Notes

Post assembly pricing includesconnector tracks, posts, and trimcovers when required. Top caps/raceway covers are specified asseparate kits and bulk shipped tofacilitate installation.

Add-on connectors include bracketsto add panels or windows to the topof any Morrison vertical panelexcept glazed panels.

Add-on connectors must bespecified in the same height as theadd-on panel or window.

Add-on connectors do not supportcantilevered shelves or overheadcabinets. For these applications,specify full height connectors.

Add-on end post should bespecified when add-on panels endover L or T post.

2-way straight post should bespecified when add-on panelsconnect in a straight line over an Xor T post.

Morrison

51

Pan

elP

lann

ing

Add-on connectors, post assembliesnon-upholstered

description type w d h pattern no. no trim Paint V1

Connector track No trim – – 9� MC1-A09S1 $70.- – 16� MC1-A16S1 70.- – 18� MC1-A18S1 72.- – 22� MC1-A22S1 72.- – 32� MC1-A32S1 76.

90° 2-way, ‘‘L’’ Non-upholstered 21/4� 21/4� 9� MC1-A09L2-( ) 236. 332.21/4� 21/4� 16� MC1-A16L2-( ) 236. 332.21/4� 21/4� 18� MC1-A18L2-( ) 244. 341.21/4� 21/4� 22� MC1-A22L2-( ) 244. 341.21/4� 21/4� 32� MC1-A32L2-( ) 255. 362.

90° 3-way, ‘‘T’’ Non-upholstered 21/4� 21/4� 9� MC1-A09T3-( ) 299. 413.21/4� 21/4� 16� MC1-A16T3-( ) 299. 413.21/4� 21/4� 18� MC1-A18T3-( ) 308. 429.21/4� 21/4� 22� MC1-A22T3-( ) 308. 429.21/4� 21/4� 32� MC1-A32T3-( ) 322. 447.

90° 4-way, ‘‘X’’ No trim 21/4� 21/4� 9� MC1-A09X4 330.21/4� 21/4� 16� MC1-A16X4 330.21/4� 21/4� 18� MC1-A18X4 341.21/4� 21/4� 22� MC1-A22X4 341.21/4� 21/4� 32� MC1-A32X4 362.

End Non-upholstered 21/4� 1� 9� MC1-A09E1-( ) 100. 172.21/4� 1� 16� MC1-A16E1-( ) 100. 172.21/4� 1� 18� MC1-A18E1-( ) 102. 179.21/4� 1� 22� MC1-A22E1-( ) 102. 179.21/4� 1� 32� MC1-A32E1-( ) 107. 187.

End Post Non-upholstered 21/4� 21/4� 9� MC1-A09P1-( ) 236. 403.21/4� 21/4� 16� MC1-A16P1-( ) 236. 403.21/4� 21/4� 18� MC1-A18P1-( ) 244. 410.21/4� 21/4� 22� MC1-A22P1-( ) 244. 410.21/4� 21/4� 32� MC1-A32P1-( ) 255. 436.

Order Code

Example: MC1-A16L2-613

MC1 ConnectorA Add-on16 HeightL2 2 way ‘‘L’’613 Paint finish


Assembly:S1- Straight connector trackL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 4-way post assemblyE1- End connector assemblyP1- End post assemblyS2- Straight post assembly

Application Notes

Please see previous page forApplication Notes.

Morrison

52

Add-on connectors, post assembliesnon-upholstered

description type w d h pattern no. no trim Paint V1

180° 2-way straight post Non-upholstered 21/4� 21/4� 9� MC1-A09S2-( ) $299. $504.21/4� 21/4� 16� MC1-A16S2-( ) 299. 504.21/4� 21/4� 18� MC1-A18S2-( ) 308. 522.21/4� 21/4� 22� MC1-A22S2-( ) 308. 522.21/4� 21/4� 32� MC1-A32S2-( ) 322. 546.

Order Code

Example: MC1-A16L2-613

MC1 ConnectorA Add-on16 HeightL2 2 way ‘‘L’’613 Paint finish


Assembly:S1- Straight connector trackL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 4-way post assemblyE1- End connector assemblyP1- End post assemblyS2- Straight post assembly

Application Notes

Please see previous page forApplication Notes.

Morrison

53

Pan

elP

lann

ing

Connectors, post assembliesupholstered


Connector track No trim – – 30� MC1-30S1 $72.- – 39� MC1-39S1 74.- – 42� MC1-42S1 74.- – 48� MC1-48S1 84.- – 56� MC1-56S1 89.- – 64� MC1-64S1 90.- – 80� MC1-80S1 106.

90° 2-way, ‘‘L’’ Upholstered 21/4� 21/4� 30� MC1-30L2-( ) 246. 271. 271. 271. 291. 318.21/4� 21/4� 39� MC1-39L2-( ) 256. 277. 277. 277. 299. 323.21/4� 21/4� 42� MC1-42L2-( ) 254. 281. 281. 281. 300. 324.21/4� 21/4� 48� MC1-48L2-( ) 262. 295. 295. 295. 312. 347.21/4� 21/4� 56� MC1-56L2-( ) 269. 300. 300. 300. 317. 362.21/4� 21/4� 64� MC1-64L2-( ) 277. 317. 317. 317. 324. 373.21/4� 21/4� 80� MC1-80L2-( ) 356. 389. 389. 389. 421. 485.

90° 3-way, ‘‘T’’ Upholstered 21/4� 21/4� 30� MC1-30T3-( ) 301. 332. 332. 332. 347. 373.21/4� 21/4� 39� MC1-39T3-( ) 313. 341. 341. 341. 353. 382.21/4� 21/4� 42� MC1-42T3-( ) 314. 345. 345. 345. 362. 386.21/4� 21/4� 48� MC1-48T3-( ) 324. 362. 362. 362. 373. 410.21/4� 21/4� 56� MC1-56T3-( ) 338. 373. 373. 373. 386. 429.21/4� 21/4� 64� MC1-64T3-( ) 353. 386. 386. 386. 401. 447.21/4� 21/4� 80� MC1-80T3-( ) 447. 492. 492. 492. 533. 579.

90° 4-way, ‘‘X’’ No trim 21/4� 21/4� 30� MC1-30X4 338.21/4� 21/4� 39� MC1-39X4 347.21/4� 21/4� 42� MC1-42X4 352.21/4� 21/4� 48� MC1-48X4 385.21/4� 21/4� 56� MC1-56X4 406.21/4� 21/4� 64� MC1-64X4 429.21/4� 21/4� 80� MC1-80X4 532.

End Upholstered 21/4� 1� 30� MC1-30E1-( ) 115. 132. 132. 132. 146. 172.21/4� 1� 39� MC1-39E1-( ) 118. 134. 134. 134. 148. 176.21/4� 1� 42� MC1-42E1-( ) 120. 135. 135. 135. 153. 177.21/4� 1� 48� MC1-48E1-( ) 131. 146. 146. 146. 160. 187.21/4� 1� 56� MC1-56E1-( ) 134. 153. 153. 153. 165. 198.21/4� 1� 64� MC1-64E1-( ) 139. 155. 155. 155. 167. 213.21/4� 1� 80� MC1-80E1-( ) 187. 187. 187. 187. 223. 283.

Order Code

Example: MC1-42L2-15-W210/20

MC1 Connector42 HeightL2 2 way ‘‘L’’15 Surface type and group



Assembly:S1- Straight connectorL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 90° 4-way post assemblyE1- End connector assembly


Application Notes

Post assembly pricing includesconnector tracks, posts and trimcovers when required. Top caps andraceway covers are specified asseparate kits and bulk shipped tofacilitate installation.

Morrison

54

Connectors, post assembliesnon-upholstered

description type w d h pattern no. no trim Paint V1 V2

Connector track No trim – – 30� MC1-30S1 $72.- – 39� MC1-39S1 74.- – 42� MC1-42S1 74.- – 48� MC1-48S1 84.- – 56� MC1-56S1 89.- – 64� MC1-64S1 90.- – 80� MC1-80S1 106.

90° 2-way, ‘‘L’’ Non-upholstered 21/4� 21/4� 30� MC1-30L2-( ) 242. 338. 406.21/4� 21/4� 39� MC1-39L2-( ) 246. 347. 417.21/4� 21/4� 42� MC1-42L2-( ) 247. 349. 419.21/4� 21/4� 48� MC1-48L2-( ) 256. 366. 438.21/4� 21/4� 56� MC1-56L2-( ) 264. 382. 460.21/4� 21/4� 64� MC1-64L2-( ) 275. 390. 473.21/4� 21/4� 80� MC1-80L2-( ) 349. 504. 606.

90° 3-way, ‘‘T’’ Non-upholstered 21/4� 21/4� 30� MC1-30T3-( ) 301. 382. 460.21/4� 21/4� 39� MC1-39T3-( ) 313. 387. 464.21/4� 21/4� 42� MC1-42T3-( ) 314. 390. 473.21/4� 21/4� 48� MC1-48T3-( ) 325. 417. 499.21/4� 21/4� 56� MC1-56T3-( ) 335. 438. 530.21/4� 21/4� 64� MC1-64T3-( ) 353. 454. 546.21/4� 21/4� 80� MC1-80T3-( ) 442. 603. 722.

90° 4-way, ‘‘X’’ No trim 21/4� 21/4� 30� MC1-30X4 338.21/4� 21/4� 39� MC1-39X4 347.21/4� 21/4� 42� MC1-42X4 352.21/4� 21/4� 48� MC1-48X4 385.21/4� 21/4� 56� MC1-56X4 406.21/4� 21/4� 64� MC1-64X4 429.21/4� 21/4� 80� MC1-80X4 532.

End Non-upholstered 21/4� 1� 30� MC1-30E1-( ) 102. 189. 226.21/4� 1� 39� MC1-39E1-( ) 106. 198. 231.21/4� 1� 42� MC1-42E1-( ) 106. 203. 235.21/4� 1� 48� MC1-48E1-( ) 118. 211. 253.21/4� 1� 56� MC1-56E1-( ) 122. 218. 256.21/4� 1� 64� MC1-64E1-( ) 132. 227. 275.21/4� 1� 80� MC1-80E1-( ) 161. 300. 364.

Order Code

Example: MC1-42L2-V-Y811

MC1 Connector42 HeightL2 2 way ‘‘L’’V Surface typeY811 Veneer


Assembly:S1- Straight connectorL2- 90° 2-way post assemblyT3- 90° 3-way post assemblyX4- 90° 4-way post assemblyE1- End connector assembly

Application Notes

Post assembly pricing includesconnector tracks, posts and trimcovers when required. Top caps andraceway covers are specified asseparate kits and bulk shipped tofacilitate installation.

Morrison

55

Pan

elP

lann

ing

Connectors, post assemblies120-degreeupholstered

description type w d h pattern no. Paint 10 15 20 30 40 45

120° 2-way, ‘‘V’’ Upholstered 21/4� 21/4� 30� MC1-30V2-( )( ) $269. $295. $295. $295. $317. $338.21/4� 21/4� 39� MC1-39V2-( )( ) 275. 301. 301. 301. 322. 345.21/4� 21/4� 42� MC1-42V2-( )( ) 272. 308. 308. 308. 323. 347.21/4� 21/4� 48� MC1-48V2-( )( ) 277. 318. 318. 318. 329. 367.21/4� 21/4� 56� MC1-56V2-( )( ) 286. 323. 323. 323. 335. 382.21/4� 21/4� 64� MC1-64V2-( )( ) 301. 335. 335. 335. 347. 396.21/4� 21/4� 80� MC1-80V2-( )( ) 380. 413. 413. 413. 445. 505.

Top cap andraceway cover kits

120° 2-way, ‘‘V’’ – – – MT5-CV2-( )( ) 17.120° 3-way, ‘‘Y’’ – – – MT5-CY3-( ) 17.

Order Code

Example: MC1-64V2-15-W210/20613

MC1 Connector64 HeightV2 120° 2 way ‘‘V’’15 Fabric gradeW210/20 Upholstery613 Inside trim finish


Assembly:V2- 120-° 2-way connector


Inside trimFinish

Application Notes

Post assembly pricing includesconnector tracks, posts and trimcovers when required.

2-way ‘‘V’’ post assemblies includeone outside trim, upholstered, andone inside trim, painted.

3-way ‘‘Y’’ post assemblies includethree inside trims, painted.

Top caps and raceway covers arespecified separately.

Veneer trim finishes are notavailable on 120° post assemblies.

Morrison

56

Connectors, post assemblies120-degreenon-upholstered

description type w d h pattern no. Paint

120° 2-way, ‘‘V’’ Non-upholstered 21/4� 21/4� 30� MC1-30V2-( )( ) $264.21/4� 21/4� 39� MC1-39V2-( )( ) 269.21/4� 21/4� 42� MC1-42V2-( )( ) 270.21/4� 21/4� 48� MC1-48V2-( )( ) 275.21/4� 21/4� 56� MC1-56V2-( )( ) 283.21/4� 21/4� 64� MC1-64V2-( )( ) 300.21/4� 21/4� 80� MC1-80V2-( )( ) 369.

120° 3-way, ‘‘Y’’ Non-upholstered 21/4� 21/4� 30� MC1-30Y3-( ) 324.21/4� 21/4� 39� MC1-39Y3-( ) 330.21/4� 21/4� 42� MC1-42Y3-( ) 332.21/4� 21/4� 48� MC1-48Y3-( ) 349.21/4� 21/4� 56� MC1-56Y3-( ) 356.21/4� 21/4� 64� MC1-64Y3-( ) 379.21/4� 21/4� 80� MC1-80Y3-( ) 464.


120° 2-way, ‘‘V’’ – – – MT5-CV2-( )( ) 17.120° 3-way, ‘‘Y’’ – – – MT5-CY3-( ) 17.

Order Code

Example: MC1-64V2-613-613

MC1 Connector64 HeightV2 120° 2-way ‘‘V’’613 Outside trim finish613 Inside trim finish


Assembly:V2- 120° 2-wayY3- 120° 3-way

Outside and inside trim paint finish.

Veneer trim finishes are notavailable on 120° post assemblies.

Application Notes

Post assembly pricing includesconnector tracks, posts and trimcovers when required.

2-way ‘‘V’’ post assemblies includeone outside trim and one insidetrim, painted.

3-way ‘‘Y’’ post assemblies includethree inside trims, painted.

Top caps and raceway covers arespecified separately.

Morrison

57

Pan

elP

lann

ing

Connectors, post assembliesvariable anglesupholstered


Variable angle Upholstered 21/4� 21/4� 64� MC1-64H1-( ) $934. $947. $947. $947. $978. $1,019.

Order Code

Example: MC1-64H1-15-W210/20

MC1 Morrison accessory64 HeightH1 Variable angle15 Surface type and group



Finishes for variable angle:

Upholstered:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes

Variable angle connector includesconnector tracks, continuous hinge,and trim covers. Specify top cap andraceway cover kit separately.

Morrison

58

Connectors, post assembliesvariable anglesnon-upholstered

description type w d h pattern no. Paint V1 V2

Variable angle Non-upholstered 21/4� 21/4� 64� MC1-64H1-( ) $935. $1,067. $1,277.

Order Code

Example: MC1-64H1-613

MC1 Morrison accessory64 HeightH1 Variable angle613 Painted finish


Specify non-upholstered surface type:( ) Painted (finish code)V( ) Veneer (finish code)

Application Notes

Variable angle connector includesconnector tracks, continuous hinge,and trim covers. Specify top cap andraceway cover kit separately.

Morrison

59

Pan

elP

lann

ing

High-low connectorsstraightupholstered


Straight high-low connectors 39� H 21/4� – 39� M2-9030-( )-( ) $226. $244. $244. $244. $256. $301.

48� H 21/4� – 48� M2-8030-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 48� M2-8040-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 48� M2-8090-( )-( ) 226. 244. 244. 244. 256. 301.

56� H 21/4� – 56� M2-5030-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 56� M2-5040-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 56� M2-5080-( )-( ) 226. 244. 244. 244. 256. 301.

64� H 21/4� – 64� M2-6030-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 64� M2-6040-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 64� M2-6050-( )-( ) 226. 244. 244. 244. 256. 301.21/4� – 64� M2-6080-( )-( ) 226. 244. 244. 244. 256. 301.

80� H 21/4� – 80� M2-1060-( )-( ) 313. 341. 341. 341. 390. 454.21/4� – 80� M2-1080-( )-( ) 313. 341. 341. 341. 390. 454.

Order Code

Example: M2-5040-613-15-W210/20

M2 Connector5040 Configuration613 Top cap finish15 Surface type and group



First finish suffix is for top cap,second is surface type.


For a high-low configuration withwood top caps, change patternnumber prefix to M3. For V2finishes, add $65 to the price listedabove.

Specify finish for top cap as shown(included in high-low postassemblies).

Application Notes

High-low connectors are used tojoin panels of two heights in astraight line. Assemblies comecomplete with connector track,hardware and trim as required.

Order dedicated high-low top capsseparately for the lower panel in astraight high-low configuration.

All high-low pattern numberscontain a logical four digit code toaccommodate the range of high-lowconnections in which 30,’’ is 3, 39�is 9, 42� is 4, 48� is 8, 56� is 5, 64�is 6, and 80� is 1. To specify astraight high-low connectionbetween a 54� panel and a 42�panel:1. Start with the highest panel, 56�

= ‘‘5’’.2. Proceed either clockwise or

counter-clockwise; hold this digitwith a ‘‘0’’.

3. Denote the next highest panel,42� = ‘‘4’’.

4. Hold the next place with a ‘‘0’’.

The correct code is M2-5040.

Morrison

60

High-low connectorsstraightnon-upholstered

description type w d h pattern no. Painted V1 V2

Straight high-low connectors 39� H 21/4� – 39� M2-9030-( )-( ) $220. $323. $387.

48� H 21/4� – 48� M2-8030-( )-( ) 220. 323. 387.21/4� – 48� M2-8040-( )-( ) 220. 323. 387.21/4� – 48� M2-8090-( )-( ) 220. 323. 387.

56� H 21/4� – 56� M2-5030-( )-( ) 220. 323. 387.21/4� – 56� M2-5040-( )-( ) 220. 323. 387.21/4� – 56� M2-5080-( )-( ) 220. 323. 387.

64� H 21/4� – 64� M2-6030-( )-( ) 220. 323. 387.21/4� – 64� M2-6040-( )-( ) 220. 323. 387.21/4� – 64� M2-6050-( )-( ) 220. 323. 387.21/4� – 64� M2-6080-( )-( ) 220. 323. 387.

80� H 21/4� – 80� M2-1060-( )-( ) 299. 463. 556.21/4� – 80� M2-1080-( )-( ) 299. 463. 556.

Order Code

Example: M2-5040-613-V-Y811

M2 Connector5040 Configuration613 Top cap finishV Surface typeY811 Veneer


First finish suffix is for top cap,second is surface type.

When ordering non-upholsteredtrims, surface type must match topcap type.

Non-upholstered surface type:( ) Painted (finish code)V( ) Veneer (finish code)

For a high-low configuration withwood top caps, change patternnumber prefix to M3. Paintedhigh-low connectors are notavailable with wood top caps. ForV2 finishes, add $65 to the pricelisted above.

Specify finish for top cap as shown(included in high-low postassemblies).

Application Notes

High-low connectors are used tojoin panels of two heights in astraight line. Assemblies comecomplete with connector track,hardware and trim as required.

Order dedicated high-low top capsseparately for the lower panel in astraight high-low configuration.

All high-low pattern numberscontain a logical four digit code toaccommodate the range of high-lowconnections in which 30� is 3, 39� is9, 42� is 4, 48� is 8, 56� is 5, 64� is6, and 80� is 1. To specify a straighthigh-low connection between a 54�panel and a 42� panel:1. Start with the highest panel,

56�=‘‘5’’.2. Proceed either clockwise or

counter-clockwise; hold this digitwith a ‘‘0’’.

3. Denote the next highest panel,42�=‘‘4’’.

4. Hold the next place with a ‘‘0’’.


Morrison

61

Pan

elP

lann

ing

High-low post assemblies90° 2-way, ‘‘L’’upholstered


90° 2-way, ‘‘L’’ high-low assemblies 39� H 21/4� 21/4� 39� M2-9300-( )-( )-( ) $438. $456. $456. $456. $468. $515.

48� H 21/4� 21/4� 48� M2-8300-( )-( )-( ) 438. 456. 456. 456. 468. 515.21/4� 21/4� 48� M2-8400-( )-( )-( ) 438. 456. 456. 456. 468. 515.21/4� 21/4� 48� M2-8900-( )-( )-( ) 438. 456. 456. 456. 468. 515.

56� H 21/4� 21/4� 56� M2-5300-( )-( )-( ) 438. 456. 456. 456. 468. 515.21/4� 21/4� 56� M2-5400-( )-( )-( ) 438. 456. 456. 456. 468. 515.21/4� 21/4� 56� M2-5800-( )-( )-( ) 438. 456. 456. 456. 468. 515.

64� H 21/4� 21/4� 64� M2-6300-( )-( )-( ) 456. 468. 468. 468. 481. 532.21/4� 21/4� 64� M2-6400-( )-( )-( ) 456. 468. 468. 468. 481. 532.21/4� 21/4� 64� M2-6500-( )-( )-( ) 456. 468. 468. 468. 481. 532.21/4� 21/4� 64� M2-6800-( )-( )-( ) 456. 468. 468. 468. 481. 532.

80� H 21/4� 21/4� 80� M2-1600-( )-( )-( ) 592. 592. 592. 592. 671. 747.21/4� 21/4� 80� M2-1800-( )-( )-( ) 592. 592. 592. 592. 671. 747.

Order Code

Example: M2-5400-613-613-15-W210/20

M2 Connector5400 Configuration613 Top cap finish613 Raceway finish15 Surface type and group



First suffix is for top cap finish,second is for raceway cover finish.Final suffix is for trim coverssurface type. When orderingnon-upholstered trims, surface typemust match top cap type.



Painted high-low connectors are notavailable with wood top caps.Specify finish for top cap andraceway covers, as shown (includedin high-low post assemblies).

Application Notes

High-low post assemblies are usedto join panels of two heights in acorner configuration. Assembliescome complete with post, hardware,and trim as required.

Order dedicated high-low top capsseparately for the lower panel in acorner high-low configuration.

All high-low pattern numberscontain a logical four digit code toaccommodate the range of high-lowconnections in which 30� is 3, 39� is9, 42� is 4, 48� is 8, 56� is 5, 64� is6, and 80� is 1. To specify an Lhigh-low connection between a 54�panel and a 42� panel:1. Start with the highest panel,


counter-clockwise to the lowerpanel, 42�=‘‘4’’.

3. Hold the next two places with a‘‘0’’.


Morrison

62

High-low post assemblies90° 2-way, ‘‘L’’non-upholstered


90° 2-way, ‘‘L’’ 39� H 21/4� 21/4� 39� M2-9300-( )-( )-( ) $426. $549. $657.

48� H 21/4� 21/4� 48� M2-8300-( )-( )-( ) 426. 549. 657.21/4� 21/4� 48� M2-8400-( )-( )-( ) 426. 549. 657.21/4� 21/4� 48� M2-8900-( )-( )-( ) 426. 549. 657.

56� H 21/4� 21/4� 56� M2-5300-( )-( )-( ) 426. 549. 657.21/4� 21/4� 56� M2-5400-( )-( )-( ) 426. 549. 657.21/4� 21/4� 56� M2-5800-( )-( )-( ) 426. 549. 657.

64� H 21/4� 21/4� 64� M2-6300-( )-( )-( ) 439. 556. 670.21/4� 21/4� 64� M2-6400-( )-( )-( ) 439. 556. 670.21/4� 21/4� 64� M2-6500-( )-( )-( ) 439. 556. 670.21/4� 21/4� 64� M2-6800-( )-( )-( ) 439. 556. 670.

80� H 21/4� 21/4� 80� M2-1600-( )-( )-( ) 605. 776. 934.21/4� 21/4� 80� M2-1800-( )-( )-( ) 605. 776. 934.

Order Code

Example: M2-5400-613-613-V-Y811

M2 Connector5400 Configuration613 Top cap finish613 Raceway finishV Surface typeY811 Veneer


First suffix is for top cap finish,second is for raceway cover finish.Final suffix is for trim coverssurface type. When orderingnon-upholstered trims, surface typemust match top cap type.

Non-upholstered surface types:( ) Painted (finish code)V( ) Veneer (finish code)


Painted high-low connectors are notavailable with wood top caps.

Specify finish for top cap andraceway covers, as shown (includedin high-low post assemblies).

Application Notes

High-low post assemblies are usedto join panels of two heights in acorner configuration. Assembliescome complete with post, hardware,and trim as required.

Order dedicated high-low top capsseparately for the lower panel in acorner high-low configuration.

All high-low pattern numberscontain a logical four digit code toaccommodate the range of high-lowconnections in which 30� is 3, 39� is9, 42� is 4, 48� is 8, 56� is 5, 64� is6, and 80� is 1. To specify an Lhigh-low connection between a 54�panel and a 42� panel:1. Start with the highest panel,


counter-clockwise to the lowerpanel, 42�=‘‘4’’.

3. Hold the next two places with a‘‘0’’.


Morrison

63

Pan

elP

lann

ing

High-low post assemblies90° 3-way, ‘‘T’’upholstered


90° 3-way, ‘‘T’’ high-low assemblies (code 5404shown)

39� H 21/4� 21/4� 39� M2-9303-( )-( )-( ) $563. $595. $595. $595. $622. $669.21/4� 21/4� 39� M2-9330-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 39� M2-9390-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 39� M2-9930-( )-( )-( ) 563. 595. 595. 595. 622. 669.

48� H 21/4� 21/4� 48� M2-8**0-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 48� M2-8*0*-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 48� M2-8*80-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 48� M2-88*0-( )-( )-( ) 563. 595. 595. 595. 622. 669.

56� H 21/4� 21/4� 56� M2-5**0-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 56� M2-5*0*-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 56� M2-5*50-( )-( )-( ) 563. 595. 595. 595. 622. 669.21/4� 21/4� 56� M2-55*0-( )-( )-( ) 563. 595. 595. 595. 622. 669.

80� H 21/4� 21/4� 80� M2-1**0-( )-( )-( ) 819. 831. 831. 831. 876. 941.21/4� 21/4� 80� M2-1*0*-( )-( )-( ) 819. 831. 831. 831. 876. 941.21/4� 21/4� 80� M2-1*10-( )-( )-( ) 819. 831. 831. 831. 876. 941.21/4� 21/4� 80� M2-11*0-( )-( )-( ) 819. 831. 831. 831. 876. 941.

64� H 21/4� 21/4� 64� M2-6**0-( )-( )-( ) 595. 622. 622. 622. 638. 684.21/4� 21/4� 64� M2-6*0*-( )-( )-( ) 595. 622. 622. 622. 638. 684.21/4� 21/4� 64� M2-6*60-( )-( )-( ) 595. 622. 622. 622. 638. 684.21/4� 21/4� 64� M2-66*0-( )-( )-( ) 595. 622. 622. 622. 638. 684.

Order Code

Example: M2-5404-613-613-15-W210/20

M2 Connector5404 Configuration613 Top cap finish613 Raceway finish15 Fabric groupW210/20 Upholstery


All high-low pattern numberscontain a logical four digit code inwhich 30� is 3, 39� is 9, 42� is 4,48� is 8, 56� is 5, 64� is 6, and 80�is 1.

* Indicate height of lower panelsreplace * with one of the following:3 30�H9 39�H4 42�H8 48�H5 56�H6 64�H1 80�HThe following high-low connectionsare available as standard product:panel connection to39� 30�48� 42�, 39�, 30�56� 48�, 42�, 30�64� 56�, 48�, 42�, 30�80� 64�, 48�

For all other connections, pleasecontact your Custom ProductDevelopment representative.

First suffix is for top cap finish,second is for raceway finish. Finalsuffix is for trim covers surfacetype.Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45For a high-low configuration withwood top caps, change patternnumber prefix to M3. For V2finishes, add $65 to the price listedabove.

Application Notes

High-low post assemblies are usedto join panels of two heights in a Tconfiguration. Assemblies comecomplete with post, hardware, andtrim as required.

Order dedicated high-low top capsseparately for the lower panels in aT-configuration.

To specify a 90° 3-way high-lowconnection of 42� panels with a 56�panel between:1. Start with the highest panel,


counter-clockwise to the nexthighest panel, 42�=‘‘4’’.

3. Hold the next digit with a ‘‘0’’.4. Continue in the same direction to

the last panel, 42�=‘‘4’’.


Morrison

64

High-low post assemblies90° 3-way, ‘‘T’’non-upholstered


90° 3-way, ‘‘T’’ high-low assemblies (code 5404shown)

39� H 21/4� 21/4� 39� M2-9303-( )-( )-( ) $550. $697. $835.21/4� 21/4� 39� M2-9330-( )-( )-( ) 550. 697. 835.21/4� 21/4� 39� M2-9390-( )-( )-( ) 550. 697. 835.21/4� 21/4� 39� M2-9930-( )-( )-( ) 550. 697. 835.

48� H 21/4� 21/4� 48� M2-8**0-( )-( )-( ) 550. 697. 835.21/4� 21/4� 48� M2-8*0*-( )-( )-( ) 550. 697. 835.21/4� 21/4� 48� M2-8*80-( )-( )-( ) 550. 697. 835.21/4� 21/4� 48� M2-88*0-( )-( )-( ) 550. 697. 835.

56� H 21/4� 21/4� 56� M2-5**0-( )-( )-( ) 550. 697. 835.21/4� 21/4� 56� M2-5*0*-( )-( )-( ) 550. 697. 835.21/4� 21/4� 56� M2-5*50-( )-( )-( ) 550. 697. 835.21/4� 21/4� 56� M2-55*0-( )-( )-( ) 550. 697. 835.

64� H 21/4� 21/4� 64� M2-6**0-( )-( )-( ) 575. 709. 850.21/4� 21/4� 64� M2-6*0*-( )-( )-( ) 575. 709. 850.21/4� 21/4� 64� M2-6*60-( )-( )-( ) 575. 709. 850.21/4� 21/4� 64� M2-66*0-( )-( )-( ) 575. 709. 850.

80� H 21/4� 21/4� 80� M2-1**0-( )-( )-( ) 825. 986. 1,174.21/4� 21/4� 80� M2-1*0*-( )-( )-( ) 825. 986. 1,174.21/4� 21/4� 80� M2-1*10-( )-( )-( ) 825. 986. 1,174.21/4� 21/4� 80� M2-11*0-( )-( )-( ) 825. 986. 1,174.

Order Code

Example: M2-5404-613-613-V-Y811

M2 Connector5404 Configuration613 Top cap finish613 Raceway finishV Surface typeY811 Veneer



*Indicate height of lower panelsreplace * with one of the following:3 30�H9 39�H4 42�H8 48�H5 56�H6 64�H1 80�H

The following high-low connectionsare available as standard product:panel

ht.connection to

39� 30�48� 42�, 39�, 30�56� 48�, 42�, 30�64� 56�, 48�, 42�, 30�80� 64�, 48�

For all other connections, pleasecontact your Custom ProductDevelopment representative.Firstsuffix is for top cap finish, second isfor raceway cover finish. Final suffixis for trim covers surface type.When ordering non-upholsteredtrims, surface type must match topcap type.Surface type:V( ) Veneer (finish code)( ) Painted (finish code)

Application Notes

High-low post assemblies are usedto join panels of two heights in a Tconfiguration. Assemblies comecomplete with post, hardware, andtrim as required.


Painted high-low connectors are notavailable with wood top caps.

Order dedicated high-low top capsseparately for the lower panels in aT-configuration.

To specify a 90° 3-way high-lowconnection of 42� panels with a 56�panel between:1. Start with the highest panel,



3. Hold the next digit with a ‘‘0’’.4. Continue in the same direction to

the last panel, 42�=‘‘4’’.


Morrison

65

Pan

elP

lann

ing

High-low post assemblies90° 4-way, ‘‘X’’upholstered


90° 4-way, ‘‘X’’ high-low assemblies (code 5454shown)

39� H 21/4� 21/4� 39� M2-9333-( )-( ) $653. $684. $684. $684. $693. $737.21/4� 21/4� 39� M2-9393-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 39� M2-9933-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 39� M2-9993-( )-( ) 653. 684. 684. 684. 693. 737.

48� H 21/4� 21/4� 48� M2-8***-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 48� M2-8*8*-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 48� M2-88**-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 48� M2-888*-( )-( ) 653. 684. 684. 684. 693. 737.

56� H 21/4� 21/4� 56� M2-5***-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 56� M2-5*5*-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 56� M2-55**-( )-( ) 653. 684. 684. 684. 693. 737.21/4� 21/4� 56� M2-555*-( )-( ) 653. 684. 684. 684. 693. 737.

64� H 21/4� 21/4� 64� M2-6***-( )-( ) 684. 693. 693. 693. 708. 756.21/4� 21/4� 64� M2-6*6*-( )-( ) 684. 693. 693. 693. 708. 756.21/4� 21/4� 64� M2-66**-( )-( ) 684. 693. 693. 693. 708. 756.21/4� 21/4� 64� M2-666*-( )-( ) 684. 693. 693. 693. 708. 756.

80� H 21/4� 21/4� 80� M2-1***-( )-( ) 925. 958. 958. 958. 997. 1,051.21/4� 21/4� 80� M2-1*1*-( )-( ) 925. 958. 958. 958. 997. 1,051.21/4� 21/4� 80� M2-11**-( )-( ) 925. 958. 958. 958. 997. 1,051.21/4� 21/4� 80� M2-111*-( )-( ) 925. 958. 958. 958. 997. 1,051.

Order Code

Example: M2-5444-613-15-W210/5

M2 Connector5444 Configuration613 Top cap finish15 Fabric groupW210/5 Upholstery



* Indicate height of lower panelsreplace * with one of the following:3 30�H9 39�H4 42�H8 48�H5 56�H6 64�H1 80�HThe following high-low connectionsare available as standard product:panel connection to39� 30�48� 42�, 39�, 30�56� 48�, 42�, 30�64� 56�, 48�, 42�, 30�80� 64�, 48�

For all other connections, pleasecontact your Custom ProductDevelopment representative. Firstsuffix is for top cap finish, second isfor raceway cover finish. Racewaycovers will always be matched withthe metallic finish corresponding totop cap finish. Final suffix is fortrim covers surface type. Whenordering non-upholstered trims,surface type must match top captype.Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45For a high-low configuration withwood top caps, change patternnumber prefix to M3. For V2finishes, add $65 to the price listedabove.

Application Notes

High-low post assemblies are usedto join panels of two heights in an Xconfiguration. Assemblies comecomplete with post, hardware, andtrim as required.

Order dedicated high-low top capsseparately for the lower panel in anX configuration.

To specify a 90° 4-way high-lowconnection of a 56� panel and three42� panels:1. Start with the highest panel,



3. Continue in the same direction tothe next panel, 42�=‘‘4’’.

4. Continue in the same direction tothe last panel, 42�=‘‘4’’.


Morrison

66

High-low post assemblies90° 4-way, ‘‘X’’non-upholstered


90° 4-way, ‘‘X’’ high-low assemblies (code 5404shown)

39� H 21/4� 21/4� 39� M2-9333-( )-( ) $652. $759. $912.21/4� 21/4� 39� M2-9393-( )-( ) 652. 759. 912.21/4� 21/4� 39� M2-9933-( )-( ) 652. 759. 912.21/4� 21/4� 39� M2-9993-( )-( ) 652. 759. 912.

48� H 21/4� 21/4� 48� M2-8***-( )-( ) 652. 759. 912.21/4� 21/4� 48� M2-8*8*-( )-( ) 652. 759. 912.21/4� 21/4� 48� M2-88**-( )-( ) 652. 759. 912.21/4� 21/4� 48� M2-888*-( )-( ) 652. 759. 912.

56� H 21/4� 21/4� 56� M2-5***-( )-( ) 652. 759. 912.21/4� 21/4� 56� M2-5*5*-( )-( ) 652. 759. 912.21/4� 21/4� 56� M2-55**-( )-( ) 652. 759. 912.21/4� 21/4� 56� M2-555*-( )-( ) 652. 759. 912.

64� H 21/4� 21/4� 64� M2-6***-( )-( ) 684. 772. 928.21/4� 21/4� 64� M2-6*6*-( )-( ) 684. 772. 928.21/4� 21/4� 64� M2-66**-( )-( ) 684. 772. 928.21/4� 21/4� 64� M2-666*-( )-( ) 684. 772. 928.

80� H 21/4� 21/4� 80� M2-1***-( )-( ) 922. 1,073. 1,290.21/4� 21/4� 80� M2-1*1*-( )-( ) 922. 1,073. 1,290.21/4� 21/4� 80� M2-11**-( )-( ) 922. 1,073. 1,290.21/4� 21/4� 80� M2-111*-( )-( ) 922. 1,073. 1,290.

Order Code

Example: M2-5444-613-V-Y811

M2 Connector5444 Configuration613 Top cap finishV VeneerY811 Finish



*Indicate height of lower panelsreplace * with one of the following:3 30�H9 39�H4 42�H8 48�H5 56�H6 64�H1 80�H

The following high-low connectionsare available as standard product:panel

ht.connection to

39� 30�48� 42�, 39�, 30�56� 48�, 42�, 30�64� 48�, 42�, 30�80� 64�, 48�

For all other connections, pleasecontact your Custom ProductDevelopment representative.Firstsuffix is for top cap finish (integralcolor or P2), second is for racewaycover finish. Raceway covers willalways be matched with the metallicfinish corresponding to top capfinish. Final suffix is for trim coverssurface type. When orderingnon-upholstered trims, surface typemust match top cap type (integralcolor or P2).Surface type:( ) Painted (finish code)V( ) Veneer (finish code)

Application Notes

For a high-low configuration withwood top caps, change patternnumber prefix to M3. Paintedhigh-low connectors are notavailable with wood top caps. ForV2 finishes, add $65 to the pricelisted above.

High-low post assemblies are usedto join panels of two heights in an Xconfiguration. Assemblies comecomplete with post, hardware, andtrim as required.

Order dedicated high-low top capsseparately for the lower panel in anX configuration.

To specify a 90° 4-way high-lowconnection of a 56� panel and three42� panels:1. Start with the highest panel,



3. Continue in the same direction tothe next panel, 42�=‘‘4’’.

4. Continue in the same direction tothe last panel, 42�=‘‘4’’.


Morrison

67

Pan

elP

lann

ing

Panel accessorieswall starters


Wall starter 1� 21/4� 30� MM1-WS30( ) $284.1� 21/4� 39� MM1-WS39( ) 295.1� 21/4� 42� MM1-WS42( ) 298.1� 21/4� 48� MM1-WS48( ) 329.1� 21/4� 56� MM1-WS56( ) 356.1� 21/4� 64� MM1-WS64( ) 389.1� 21/4� 80� MM1-WS80( ) 439.

Order Code

Example: MM1-WS56-613

MM1 Morrison accessoryWS Wall starter56 Height613 Finish


Specify painted finishes for wallstarter.

Application Notes

Wall starters connect a panel runperpendicular to a fixed wall. Wallstarter includes connector track,wall mount bracket, and paintedend top cap.

For wood top caps, order wood endtrim top cap (MT5-CE1) separately.

Morrison

68

Panel accessoriesaccessories

description type w d h pattern no. list price

Panel stiffeners Corner – – – MM1-PSL2 $70.Straight – – – MM1-PSS1 36.

Stabilizer foot 2� 13� 14� MM1-SF( ) 417.

Carpet grips (10) MM2-CG 33.

Top Capconnector

(set of 50) – – – MM1-CNP2 62.

Order Code

Example: MM1-PSS1

MM1 Morrison accessoryPSS1 Panel stiffener


Specify paint finish for stabilizerfoot.

Applicatin Notes

Panel stiffeners add rigidity tostraight or corner connections, andshould be used with glazed panels.Bracket is concealed under topcaps.

Stabilizer foot attaches to connectortrack to stabilize panel runs.

Carpet grips snap onto panel glidesto prevent panel runs from shiftingon carpet. Glide rotates in carpetgrip to permit leveling

For applications involving RollingDoors use stiffeners found on page42.

Morrison

69

Pan

elP

lann

ing

Trim covers for reconfigurationupholstered


90° 2-way, ‘‘L’’ Upholstery 21/4� – 9� MT1-09L2-( ) $90. $102. $102. $102. $122. $135.21/4� – 16� MT1-16L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 18� MT1-18L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 22� MT1-22L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 30� MT1-30L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 32� MT1-32L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 39� MT1-39L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 42� MT1-42L2-( ) 90. 102. 102. 102. 122. 135.21/4� – 48� MT1-48L2-( ) 98. 110. 110. 110. 132. 145.21/4� – 56� MT1-56L2-( ) 102. 120. 120. 120. 135. 153.21/4� – 64� MT1-64L2-( ) 120. 134. 134. 134. 153. 166.21/4� – 80� MT1-80L2-( ) 141. 155. 155. 155. 177. 189.

90° 3-way, ‘‘T’’ Upholstery 21/4� – 9� MT1-09T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 16� MT1-16T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 18� MT1-18T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 22� MT1-22T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 30� MT1-30T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 32� MT1-32T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 39� MT1-39T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 42� MT1-42T3-( ) 62. 76. 76. 76. 91. 106.21/4� – 48� MT1-48T3-( ) 70. 87. 87. 87. 98. 115.21/4� – 56� MT1-56T3-( ) 76. 90. 90. 90. 106. 122.21/4� – 64� MT1-64T3-( ) 90. 102. 102. 102. 122. 135.21/4� – 80� MT1-80T3-( ) 107. 124. 124. 124. 143. 158.

End Upholstery 21/4� – 9� MT1-09E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 16� MT1-16E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 18� MT1-18E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 22� MT1-22E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 30� MT1-30E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 32� MT1-32E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 39� MT1-39E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 42� MT1-42E1-( ) 76. 90. 90. 90. 106. 122.21/4� – 48� MT1-48E1-( ) 87. 98. 98. 98. 115. 132.21/4� – 56� MT1-56E1-( ) 90. 102. 102. 102. 122. 135.21/4� – 64� MT1-64E1-( ) 102. 120. 120. 120. 135. 153.21/4� – 80� MT1-80E1-( ) 124. 141. 141. 141. 143. 177.

Order Code

Example: MT1-42L2-15-W210/2

MT1 Trim cover42 HeightL2 Assembly15 Surface typeW210/2 Upholstery



Application Notes

Order trim covers for replacement orreconfiguration only.

Trim covers are included in allconnector kits.

Morrison

70

Trim covers for reconfigurationnon-upholstered


90° 2-way, ‘‘L’’ Non-upholstered 21/4� – 9� MT1-09L2-( ) $79. $154. n/a21/4� – 16� MT1-16L2-( ) 79. 154. n/a21/4� – 18� MT1-18L2-( ) 79. 154. n/a21/4� – 22� MT1-22L2-( ) 79. 154. n/a21/4� – 30� MT1-30L2-( ) 79. 154. 185.21/4� – 32� MT1-32L2-( ) 79. 154. n/a21/4� – 39� MT1-39L2-( ) 79. 154. 185.21/4� – 42� MT1-42L2-( ) 79. 154. 185.21/4� – 48� MT1-48L2-( ) 87. 161. 203.21/4� – 56� MT1-56L2-( ) 93. 167. 210.21/4� – 64� MT1-64L2-( ) 106. 183. 222.21/4� – 80� MT1-80L2-( ) 122. 210. 247.

90° 3-way, ‘‘T’’ Non-upholstered 21/4� – 9� MT1-09T3-( ) 53. 124. n/a21/4� – 16� MT1-16T3-( ) 53. 124. n/a21/4� – 18� MT1-18T3-( ) 53. 124. n/a21/4� – 22� MT1-22T3-( ) 53. 124. n/a21/4� – 30� MT1-30T3-( ) 53. 124. 153.21/4� – 32� MT1-32T3-( ) 53. 124. n/a21/4� – 39� MT1-39T3-( ) 53. 124. 153.21/4� – 42� MT1-42T3-( ) 53. 124. 153.21/4� – 48� MT1-48T3-( ) 55. 134. 158.21/4� – 56� MT1-56T3-( ) 65. 139. 165.21/4� – 64� MT1-64T3-( ) 79. 154. 185.21/4� – 80� MT1-80T3-( ) 98. 179. 218.

End Non-upholstered 21/4� – 9� MT1-09E1-( ) 65. 139. n/a21/4� – 16� MT1-16E1-( ) 65. 139. n/a21/4� – 18� MT1-18E1-( ) 65. 139. n/a21/4� – 22� MT1-22E1-( ) 65. 139. n/a21/4� – 30� MT1-30E1-( ) 65. 139. 165.21/4� – 32� MT1-32E1-( ) 65. 139. n/a21/4� – 39� MT1-39E1-( ) 65. 139. 165.21/4� – 42� MT1-42E1-( ) 65. 139. 165.21/4� – 48� MT1-48E1-( ) 74. 146. 177.21/4� – 56� MT1-56E1-( ) 79. 154. 185.21/4� – 64� MT1-64E1-( ) 93. 167. 210.21/4� – 80� MT1-80E1-( ) 110. 191. 227.

Order Code

Example: MT1-22E1-613

MT1 Trim cover22 HeightE1 Configuration613 Finish


Specify paint surface or veneer finish.

Application Notes

Order trim covers for replacement orreconfiguration only. Trim coversare included in all connector kits.

Morrison

71

Pan

elP

lann

ing

Morrison Accessvertical raceway panelsframe and face plates

description type w d h pattern no. no finish paint

Vertical raceway panel frame 6� 21/4� 42� MA1-V4206 $483.6� 21/4� 48� MA1-V4806 556.6� 21/4� 56� MA1-V5606 603.6� 21/4� 64� MA1-V6406 654.6� 21/4� 80� MA1-V8006 761.

Face plates kit for vertical raceway 4 openings one side 6� – 42� MA1-F4240( ) n/c6� – 48� MA1-F4840( ) n/c6� – 56� MA1-F5640( ) n/c6� – 64� MA1-F6440( ) n/c6� – 80� MA1-F8040( ) n/c

4 openings two sides (or 8 one side) 6� – 42� MA1-F4244( ) n/c6� – 48� MA1-F4844( ) n/c6� – 56� MA1-F5644( ) n/c6� – 64� MA1-F6444( ) n/c6� – 80� MA1-F8044( ) n/c

8 openings two sides 6� – 42� MA1-F4288( ) n/c6� – 48� MA1-F4888( ) n/c6� – 56� MA1-F5688( ) n/c6� – 64� MA1-F6488( ) n/c6� – 80� MA1-F8088( ) n/c

No openings 6� – 42� MA1-F4200( ) n/c6� – 48� MA1-F4800( ) n/c6� – 56� MA1-F5600( ) n/c6� – 64� MA1-F6400( ) n/c6� – 80� MA1-F8000( ) n/c

Order Code

Example: MA1-V4206

MA1 Morrison AccessV Vertical raceway42 Height06 Width


For face plates, specify surface paintfinish. n/c = No charge.

Vertical raceway extends panel baseraceway to top cap, providingdesk-height access and continuitywith Highway and top cap raceway.

Vertical raceway plans as 6� widepanel, requiring standardconnectors to join to adjacentvertical panels. Specify 6� top capand raceway cover kit separately.

Vertical raceway panel has two full2� x 2� lay-in channels for powertrack, PDC connectors or lay-incable management, and one centereasy-access channel.

Application Notes

Specify face plates kit with coversfor all vertical raceway panels, withoutlets one or both sides. Kit withfour openings has two outletopenings just above worksurfaceand two outlets below theworksurface, in one channel. Otherchannel and all other covers have nooutlet openings. Face plates kit witheight openings has four outletsabove and four below, in twochannels.

All kits include covers for bothsides of vertical raceway.

Outlet openings accept PDCmodules, blank filler plates, orpower outlets (specify outlets andpower components separately).

Morrison

72

Morrison Accessvertical raceway panelsfabric covers


Full fabric cover, no outlets (one side of panelonly)

6� 21/4� 42� MA1-F42F( ) $228. $242. $247. $267. $291. $300.6� 21/4� 48� MA1-F48F( ) 253. 263. 270. 291. 314. 322.6� 21/4� 56� MA1-F56F( ) 271. 279. 286. 314. 335. 349.6� 21/4� 64� MA1-F64F( ) 291. 301. 312. 340. 365. 379.6� 21/4� 80� MA1-F80F( ) 327. 341. 353. 383. 414. 433.

Fabric covers with center channel, no outlets (oneside of panel only)

6� 21/4� 14� MA1-F14C( ) 279. 299. 301. 322. 353. 367.6� 21/4� 22� MA1-F22C( ) 314. 331. 341. 366. 390. 410.6� 21/4� 32� MA1-F32C( ) 353. 373. 382. 410. 438. 455.6� 21/4� 38� MA1-F38C( ) 366. 385. 390. 421. 455. 465.6� 21/4� 42� MA1-F42C( ) 385. 410. 416. 449. 479. 498.6� 21/4� 48� MA1-F48C( ) 414. 438. 450. 483. 509. 534.6� 21/4� 56� MA1-F56C( ) 450. 476. 484. 517. 553. 570.6� 21/4� 64� MA1-F64C( ) 483. 505. 522. 556. 587. 603.6� 21/4� 80� MA1-F80C( ) 549. 582. 593. 654. 668. 685.

Order Code

Example: MA1-F42-F10

MA1 Morrison AccessF Facecover42 HeightF Full cover10 Fabric group


Specify fabric grade for fabric covers:10- Fabric group 1015- Fabric group 1520- Fabric group 2025- Fabric group 2530- Fabric group 3040- Fabric group 4045- Fabric group 45

Application Notes

Full fabric cover replaces standardpainted covers on one side ofvertical raceway panel, with nooutlet openings and no access tocenter channel.

Fabric covers with center channelreplace the standard painted coversabove outlet openings, from 42�H tothe top of the panel. Specify 14�Hcovers for 56�H panel, 22�H coversfor 64�H panel, or 38�H covers for80�H panel.

Fabric covers with center channelmay also be specified in anystandard panel height, with nooutlet openings.

Morrison

73

Pan

elP

lann

ing

Morrison Accessceiling infeed panels

description w d h pattern no. paint

Ceiling infeed panel 6� 21/4� 48� MA1-CI48( ) $603.6� 21/4� 60� MA1-CI60( ) 675.6� 21/4� 72� MA1-CI72( ) 747.

Order Code

Example: MA1-CI48-613

MA1 Morrison AccessCI Ceiling infeed48 Height613 Finish


Specify painted finish for ceilinginfeed panel.

Application Notes

Ceiling infeed panel mountsbetween vertical raceway panel andceiling, and may be trimmed on site.

Morrison

74

Morrison AccessHighwayhorizontal channels

description type w d h pattern no. black

Highway Panels 6� 21/4� 1� MA1-H6 $54.18� 21/4� 1� MA1-H18 61.24� 21/4� 1� MA1-H24 65.30� 21/4� 1� MA1-H30 77.36� 21/4� 1� MA1-H36 91.42� 21/4� 1� MA1-H42 102.48� 21/4� 1� MA1-H48 120.60� 21/4� 1� MA1-H60 153.

Highway for high/low panels 5� 21/4� 1� MA1-HHL6 54.17� 21/4� 1� MA1-HHL18 61.23� 21/4� 1� MA1-HHL24 65.29� 21/4� 1� MA1-HHL30 77.35� 21/4� 1� MA1-HHL36 91.41� 21/4� 1� MA1-HHL42 102.47� 21/4� 1� MA1-HHL48 120.59� 21/4� 1� MA1-HHL60 153.

Highway Corner connector MA1-CL 12.End connector MA1-CE 12.End post MA1-CP 12.Straight post MA1-CS 12.T connector MA1-CT 12.X connector MA1-CX 12.

Order Code

Example: MA1-H42

MA1 Morrison AccessH Highway42 Width


Highway for panels is blackanodized aluminum with black vinylflaps. Highway connectors are blackcolor-integral molded plastic.

Highway snaps onto top of verticalpanel to provide accessiblehorizontal cable channel on eachside of panel.

Highway may be planned on allsame-height panels in a cluster oronly on center spine panels.

Highway accepts standard top caps.

Highway capacity is approximatelythirty-two Category 5 4-pair UTPcables ( 3/16�dia. or equivalent), orsixteen each side.

Highways for high-low panels aresized for the lower panel in straighthigh-low configurations.

Application Notes

When Highway is planned only onthe center spine of a cluster specifystraight post Highway connectors atT and X connections; specifyHighway end post connector atcorner or T at end of spine. Specifystraight post or end post top capsseparately (see page 78) for all L, Tand X connections.

Highway connectors permitcontinuous lay-in cabling at all postconnections.

Morrison

75

Pan

elP

lann

ing

Morrison AccessHighwayvertical wire management

description type w d h pattern no. black paint

Change of height highway Straight 1� 21/4� 6� MA1-HCS6( ) $19.1� 21/4� 8� MA1-HCS8( ) 32.1� 21/4� 9� MA1-HCS9( ) 35.1� 21/4� 10� MA1-HCS10( ) 36.1� 21/4� 14� MA1-HCS14( ) 45.1� 21/4� 16� MA1-HCS16( ) 49.1� 21/4� 18� MA1-HCS18( ) 51.1� 21/4� 22� MA1-HCS22( ) 61.1� 21/4� 26� MA1-HCS26( ) 65.1� 21/4� 32� MA1-HCS32( ) 85.

Vertical wire manager 39�H panel 2� 3/8� 35� MA1-VWM39( ) 5. 12.42�H panel 2� 3/8� 38� MA1-VWM42( ) 11. 15.48�H panel 2� 3/8� 44� MA1-VWM48( ) 12. 16.56�H panel 2� 3/8� 52� MA1-VWM56( ) 15. 17.64�H panel 2� 3/8� 60� MA1-VWM64( ) 16. 18.80�H panel 2� 3/8� 76� MA1-VWM80( ) 18. 31.

Order Code

Example: MA1-VWM42-612

MA1 Morrison AccessV Vertical racewayWM Wire manager42 Height612 Finish


Change of height Highway arepainted finish.

Vertical wire managers are black (N)or painted finish:

Application Notes

Change of height Highway managescables from one panel height toanother in high-low straightconfigurations. Specify kit to matchheight difference in panels (e.g.,MA1-HCS22 for change of heightfrom 64� to 42�).

Specify Highway for high/low panels(see page 75) for lower panel instraight high/low connection.

Vertical wire manager attaches toHighway rim anywhere along face ofpanel to control cables fromHighway to worksurface, panel baseraceway, or lower panels in corner T,or X configurations.

Vertical wire manager isdimensioned to fit in the3/8� cableclearance behind the worksurface.

Morrison

76

Currents trim for Morrisontrim covers for reconfiguration


Top trim 6� 2� – AA1 T06 $9.18� 2� – AA1 T18 12.24� 2� – AA1 T24 15.30� 2� – AA1 T30 28.36� 2� AA1 T36 30.42� 2� – AA1 T42 31.48� 2� – AA1 T48 33.60� 2� – AA1 T60 36.72� 2� – AA1 T72 39.

Top caps for Morrison post assemblies (90° 4-way‘‘X’’ shown)

End post AA1 TMP1 11.Straight post AA1 TMS2 11.90° 2-way ‘‘L’’ AA1 TML2 11.90° 3-way ‘‘T’’ AA1 TMT3 11.90° 4-way ‘‘X’’ AA1 TMX4 11.

End connector (with connector track) 1� 2� 39� AC1-39E1 80.1� 2� 48� AC1-48E1 84.1� 2� 64� AC1-64E1 95.

End trim (no connector) 39� panel – 2� 39� AA1 39E 49.48� panel – 2� 48� AA1 48E 51.64� panel – 2� 64� AA1 64E 53.

Raceway cover for end trim on Morrison panel AA1 RE( ) 36.

Order Code

Example: AA1 T36

AA1 T Top trim, panel36 Width


End and top trims are trim greyintegral finish.

Specify painted finish for racewaycover.

Application Notes

Currents-style trim covers found onthis page may be retrofitted to newand existing Morrison panels.

When using Currents top trims,Currents for Morrison end correctorsor end trims must also be used.

Top trim corresponds in width toMorrison panels.

Top cap for post assemblies can beretrofitted to Morrison postassemblies.

End connector includes top cap andconnector track.

End trim may be specified insteadof an end connector if cantilevercapability is not required. End trimincludes top cap.

Raceway cover encloses end ofMorrison panel raceway underCurrents end trim.

Morrison

77

Pan

elP

lann

ing

Top cap and raceway cover kitspainted finish top caps


Straight - no outlet plates 6� – 4� MT5-N6-( )( ) $17.18� – 4� MT5-N18-( )( ) 22.24� – 4� MT5-N24-( )( ) 24.30� – 4� MT5-N30-( )( ) 26.36� – 4� MT5-N36-( )( ) 28.42� – 4� MT5-N42-( )( ) 33.48� – 4� MT5-N48-( )( ) 33.60� – 4� MT5-N60-( )( ) 44.

Straight - with outlet plates 24� – 4� MT5-E24-( )( ) 27.30� – 4� MT5-E30-( )( ) 27.36� – 4� MT5-E36-( )( ) 27.42� – 4� MT5-E42-( )( ) 38.48� – 4� MT5-E48-( )( ) 38.60� – 4� MT5-E60-( )( ) 50.


End post (top cap only) MT5-CP1-( ) 17.Straight post (top cap only) MT5-CS2-( ) 17.End – – – MT5-CE1-( )( ) 17.Variable angle – – – MT5-CH1-( )( ) 17.90° 2-way, ‘‘L’’ – – – MT5-CL2-( )( ) 17.90° 3-way, ‘‘T’’ – – – MT5-CT3-( )( ) 17.90° 4-way, ‘‘X’’ – – – MT5-CX4-( ) 17.

Order Code

Example: MT5-N36-612-612

MT5 Top cap/raceway coverkit

N Type36 Panel width612 Paint finish612 Raceway finish


N- No outlet filler platesE- With outlet filler platesC- Post assembly

For Chicago code raceway coverswith outlet plates, see page 101.

Specify finish for top cap andraceway covers.

Application Notes

Top caps/raceway covers arespecified as separate kits and bulkshipped to facilitate installation.High-low post assemblies come withconnector top cap/raceway coverkits; they do not have to be specifiedseparately.

18� powered panels can transmitpower but do not accept outlets.24�W panels accept only onereceptacle each side. All poweredpanels over 24�W have tworeceptacles on each side (4 duplexoutlets per panel).

Raceway covers with additionalreceptacle openings on panels over42�W may be specified separately(in addition to top cap/covers kit).See Multiple outlet covers, page 81.

Morrison

78

Top cap and raceway cover kitswood top caps

description type w d h pattern no. PV1 PV2

Straight - no outlet plates 6� – 4� MT5-N6-( )( ) $17. $90.18� – 4� MT5-N18-( )( ) 22. 244.24� – 4� MT5-N24-( )( ) 24. 262.30� – 4� MT5-N30-( )( ) 26. 271.36� – 4� MT5-N36-( )( ) 28. 291.42� – 4� MT5-N42-( )( ) 33. 312.48� – 4� MT5-N48-( )( ) 33. 322.60� – 4� MT5-N60-( )( ) 44. 353.

Straight - with outlet plates 24� – 4� MT5-E24-( )( ) 27. 262.30� – 4� MT5-E30-( )( ) 27. 271.36� – 4� MT5-E36-( )( ) 27. 291.42� – 4� MT5-E42-( )( ) 38. 312.48� – 4� MT5-E48-( )( ) 38. 322.60� – 4� MT5-E60-( )( ) 50. 353.


End post (top cap only) MT5-CP1-( ) 17. 176.Straight post (top cap only) MT5-CS2-( ) 17. 176.End – – – MT5-CE1-( )( ) 17. 161.Variable angle – – – MT5-CH1-( )( ) 17. 244.90°, 2-way, ‘‘L’’ – – – MT5-CL2-( )( ) 17. 176.90°, 3-way, ‘‘T’’ – – – MT5-CT3-( )( ) 17. 176.90°, 4-way, ‘‘X’’ – – – MT5-CX4-( ) 17. 176.

Order Code

Example: MT5-N36-Y811-612

MT5 Top cap/raceway coverkit

N Type36 Panel widthY811 Top cap612 Raceway cover paint

finish


N- No outlet filler platesE- With outlet filler platesC- Post assembly

Specify top cap veneer suffix, thenraceway cover finish suffix.PV1- Painted covers, V1 top capPV2- Painted covers, V2 top cap

For Chicago code raceway coverswith outlet plates, see page 102.

Application Notes

Top caps/raceway covers arespecified as separate kits and bulkshipped to facilitate installation.High-low post assemblies come withconnector top cap/raceway coverkits; order top caps for lower panelsseparately.

18� powered panels can transmitpower but do not accept outlets.24�W powered panels accept onereceptacle each side.

All powered panels over 24�W havetwo receptacles on each side (4 perpanel).

Raceway covers with additionalreceptacle openings on panels over42�W may be specified separately(in addition to top cap/covers kit).See multiple outlet covers, page 81.

Morrison

79

Pan

elP

lann

ing

High-low top caps

description w d h pattern no. Paint V1 V2

High-low dedicated width top cap - Straight 17� 21/4� 1/4� MT5-HLS18-( ) $63. $63. $323.23� 21/4� 1/4� MT5-HLS24-( ) 70. 70. 338.29� 21/4� 1/4� MT5-HLS30-( ) 76. 76. 353.35� 21/4� 1/4� MT5-HLS36-( ) 89. 89. 372.41� 21/4� 1/4� MT5-HLS42-( ) 91. 91. 385.47� 21/4� 1/4� MT5-HLS48-( ) 95. 95. 396.59� 21/4� 1/4� MT5-HLS60-( ) 106. 106. 429.

High-low dedicated width top cap - Post 171/2� 21/4� 1/4� MT5-HLC18-( ) 63. 63. 323.231/2� 21/4� 1/4� MT5-HLC24-( ) 70. 70. 338.291/2� 21/4� 1/4� MT5-HLC30-( ) 76. 76. 353.351/2� 21/4� 1/4� MT5-HLC36-( ) 89. 89. 372.411/2� 21/4� 1/4� MT5-HLC42-( ) 91. 91. 385.471/2� 21/4� 1/4� MT5-HLC48-( ) 95. 95. 396.591/2� 21/4� 1/4� MT5-HLC60-( ) 106. 106. 429.

Order Code

Example: MT5-HLC36-612

MT5 Top cap kitHLC Type36 Panel width612 Paint finish


Specify finish for top cap.

Application Notes

For panels used in high-lowconfigurations, order standard topcap/raceway cover kits on previouspages. Then order one dedicatedwidth top cap for each of the lowerpanels in the high-lowconfiguration. Install the standardraceway covers, but replace thestandard top cap with the high-lowtop cap. Save the standard top capfor future reconfiguration.

High-low top caps for straightconfigurations are used only withhigh-low straight connectors.High-low top caps for postconfigurations are used with allcorner, T, or X high-low postassemblies.

Morrison

80

PDC and multiple outlet covers

description type w d h pattern no. painted

Power, data, and communications (PDC) outlets 24� – 4� MT5-PDC-24-( ) $47.30� – 4� MT5-PDC-30-( ) 51.36� – 4� MT5-PDC-36-( ) 54.42� – 4� MT5-PDC-42-( ) 61.48� – 4� MT5-PDC-48-( ) 63.60� – 4� MT5-PDC-60-( ) 74.

Multiple power outlets Four outlets 48� – 4� MT5-EX48-( ) 63.Four outlets 60� – 4� MT5-EX60-( ) 74.

Order Code

Example: MT5-PDC-48612

M MorrisonT5 Top capPDC PDC raceway48 Width612 Finish


Specify paint finish.

Application Notes

Specify PDC covers when planningvoice/data outlets in a poweredpanel. PDC covers provide oneprotected opening for PDC modules6� from each end of panel, inaddition to standard power outletopenings.

Specify multiple power outlet coversin addition to standard panel topcap/raceway cover kits, whenplanning more than two duplexoutlets on a panel face.

Multiple outlet covers haveopenings for four duplex outlets.

Power, data and communicationsoutlets covers cannot be used withMorrison panels produced prior to1995; specify standard powered ormultiple outlet covers and plandata/communications outlets inpass-through or non-poweredpanels.

For Chicago code PDC covers, referto page 102.

Morrison

81

Pan

elP

lann

ing

Stackable add-up panelsupholstered

description h w d pattern no. 10 15 20 30 40 45

First up panel on Morrison panels 16� 18� 2� AY1-1618M-A( ) $540. $592. $604. $668. $736. $780.24� 2� AY1-1624M-A( ) 576. 624. 628. 698. 778. 822.30� 2� AY1-1630M-A( ) 624. 680. 692. 768. 856. 904.36� 2� AY1-1636M-A( ) 672. 730. 746. 824. 932. 988.42� 2� AY1-1642M-A( ) 734. 802. 822. 920. 1,028. 1,096.48� 2� AY1-1648M-A( ) 782. 860. 882. 978. 1,100. 1,172.60� 2� AY1-1660M-A( ) 876. 964. 990. 1,100. 1,244. 1,328.

25� 18� 2� AY1-2518M-A( ) 596. 646. 668. 730. 816. 864.24� 2� AY1-2524M-A( ) 628. 684. 700. 774. 862. 916.30� 2� AY1-2530M-A( ) 684. 748. 768. 850. 948. 1,010.36� 2� AY1-2536M-A( ) 738. 812. 824. 920. 1,032. 1,100.42� 2� AY1-2542M-A( ) 816. 892. 916. 1,022. 1,152. 1,230.48� 2� AY1-2548M-A( ) 868. 953. 982. 1,094. 1,232. 1,312.60� 2� AY1-2560M-A( ) 974. 1,076. 1,102. 1,234. 1,394. 1,494.

Next up panel on stackable add-up panels 16� 18� 2� AY1-1618S-A( ) 536. 588. 596. 658. 730. 774.24� 2� AY1-1624S-A( ) 566. 618. 628. 690. 772. 816.30� 2� AY1-1630S-A( ) 618. 674. 686. 762. 848. 896.36� 2� AY1-1636S-A( ) 666. 722. 738. 818. 924. 976.42� 2� AY1-1642S-A( ) 728. 796. 816. 904. 1,018. 1,086.48� 2� AY1-1648S-A( ) 776. 852. 874. 968. 1,088. 1,160.60� 2� AY1-1660S-A( ) 868. 954. 982. 1,090. 1,232. 1,314.

Order Code

Example: AY1-1618M-A-15-W210/2

AY1 Stackable panel16 Height18 WidthM Mounting kitA Surface type15 Fabric groupW210/2 Upholstery


First suffix indicates application:M Morrison panelsS Stackable add-up panels

Surface type:A Tackable upholstered

Specify fabric group:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45

Fabric groups can be found on page5.


For combinations of fabrics, listboth suffixes (e.g. 20/40) andupholstery pattern numbers.

Specify trim caps and connectorsseparately (see page 85).

Application Notes

Stackable add-up panels provideadaptable privacy on Morrisonpanels.

First up panels include top trim,edge trim in Currents trim grey andbayonet supports that bolt on to topof a Morrison panel.

Next up panels include intermediatemasts that engage into the sides offirst up (or next up) panels ofcorresponding width. All stackableadd-up panels may be removedwithout tools.

Currents for Morrison end connectoror end trim (page 77) must bespecified when stacking over aMorrison panel in end condition.

Top and edge trims are Currentstrim grey.

Morrison

82

Stackable add-up panelsglazed

description h w d pattern no. C T

First up panel on Morrison panels 16� 18� 2� AY1-1618M-W( )( ) $671. $728.24� 2� AY1-1624M-W( )( ) 728. 790.30� 2� AY1-1630M-W( )( ) 786. 859.36� 2� AY1-1636M-W( )( ) 851. 930.42� 2� AY1-1642M-W( )( ) 904. 990.48� 2� AY1-1648M-W( )( ) 966. 1,057.60� 2� AY1-1660M-W( )( ) 1,050. 1,143.

25� 18� 2� AY1-2518M-W( )( ) 854. 932.24� 2� AY1-2524M-W( )( ) 932. 1,018.30� 2� AY1-2530M-W( )( ) 1,012. 1,110.36� 2� AY1-2536M-W( )( ) 1,094. 1,205.42� 2� AY1-2542M-W( )( ) 1,176. 1,292.48� 2� AY1-2548M-W( )( ) 1,264. 1,389.60� 2� AY1-2560M-W( )( ) 1,344. 1,475.

Next up panel on stackable add-up panels 16� 18� 2� AY1-1618S-W( )( ) 666. 720.24� 2� AY1-1624S-W( )( ) 720. 781.30� 2� AY1-1630S-W( )( ) 779. 853.36� 2� AY1-1636S-W( )( ) 842. 921.42� 2� AY1-1642S-W( )( ) 896. 981.48� 2� AY1-1648S-W( )( ) 957. 1,048.60� 2� AY1-1660S-W( )( ) 1,041. 1,134.

Order Code

Example: AY1-1636M-W-C-612

AY1 Stackable add-up16 Height36 WidthM Mounting kitW Surface typeC Glazing finish612 Frame finish



Second suffix indicatessurface type:W Glazed



Application Notes





Top and edge trim are Currents trimgrey.

Morrison

83

Pan

elP

lann

ing

Stackable add-up panelstranslucent and marker surface on both sides

description h w d pattern no. M

First up panel on Morrison panels 16� 24� 2� AY1-1624M-( ) $778.30� 2� AY1-1630M-( ) 837.36� 2� AY1-1636M-( ) 905.42� 2� AY1-1642M-( ) 982.48� 2� AY1-1648M-( ) 1,078.60� 2� AY1-1660M-( ) n/a

25� 24� 2� AY1-2524M-( ) 865.30� 2� AY1-2530M-( ) 941.36� 2� AY1-2536M-( ) 1,015.42� 2� AY1-2542M-( ) 1,112.48� 2� AY1-2548M-( ) 1,213.60� 2� AY1-2560M-( ) n/a

Next up panel on stackable add-up panels 16� 24� 2� AY1-1624S-( ) 772.30� 2� AY1-1630S-( ) 828.36� 2� AY1-1636S-( ) 896.42� 2� AY1-1642S-( ) 971.48� 2� AY1-1648S-( ) 1,066.60� 2� AY1-1660S-( ) n/a

Order Code

Example: AY1-1636-M-TC

AY1 Stackable add-up16 Height36 WidthM Mounting kitM Surface type



Second suffix indicatessurface type:M Marker surface (both sides)


Application Notes





Top and edge trim are Currents trimgrey.


Morrison

84

Stackable add-up connectors and trim capsMorrison applications - first up


Trim caps End cap AY1-CE $5.Straight cap 2� 2� – AY1 CS 5.

Stackable first up connectors over Morrisonpanels - Corner

2� 2� 16� AY1 ML16-( ) 314.2� 2� 25� AY1 ML25-( ) 365.

Stackable first up connectors over Morrisonpanels - T

2� 2� 16� AY1 MT16-( ) 380.2� 2� 25� AY1 MT25-( ) 465.

Stackable first up connectors over Morrisonpanels - X

2� 2� 16� AY1 MX16 450.2� 2� 25� AY1 MX25 566.

Stackable first up connectors over Morrisonpanels - Straight post

2� 2� 16� AY1 MP16-( ) 314.2� 2� 25� AY1 MP25-( ) 365.

Order Code

Example: AY1 CS

AY1 Stackable add-upCS Connector type


Trim caps are Currents trim grey.

Top caps for Stackable connectorsover Morrison panels are Currentstrim grey.

Specify paint finish for Stackableconnector vertical trims.

Application Notes

Trim caps are specified byapplication to fill top corners ofstackable add-up panels. Straightcap aligns adjacent add-up panels.End cap finishes the end of the runof add-up panels.

Stackable connectors join stackableadd-up panels over a Morrisonconnector.

Morrison

85

Pan

elP

lann

ing

Stackable add-up connectors and trim capsMorrison applications - first up


Masts for Morrison panel (replacement part) AY1-MMK $73.

Order Code

Example: AY1 CS






Application Notes



Morrison

86

Stackable add-up connectors and trim capsMorrison applications - next up


Trim caps End cap AY1-CE $5.Straight cap 2� 2� – AY1 CS 5.

Stackable next up connectors

(X shown)

Corner 2� 2� 16� AY1 SML16-( ) 279.Straight post 2� 2� 16� AY1 SMP16-( ) 279.T 2� 2� 16� AY1 SMT16-( ) 345.X 2� 2� 16� AY1 SMX16-( ) 414.

High/low adapter kit AY1-HLA 88.

Stacking hardware kit (replacement part) AY1-SMK 50.

Order Code

Example: AY1 CS






Application Notes



Next up connectors correspond tonext up panels.

High-low adapter kit includes anend cap and a bayonet withattachment holes to join stackableadd-up panels in a straight high-lowconfiguration. The kit also adapts acorner T or X post for high-lowconfigurations.

Morrison

87

Pan

elP

lann

ing

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for panelspower rails


Power rail for panel base 24�w 6� 2� 2� MR3-E24 $242.30�w 12� 2� 2� MR3-E30NS 269.36�w 18� 2� 2� MR3-E36NS 291.42�w 24� 2� 2� MR3-E42NS 312.48�w 30� 2� 2� MR3-E48NS 323.60�w 42� 2� 2� MR3-E60NS 345.

Multiple outlet power rails 48�w 30� 2� 2� MR3-E48-4 460.60�w 42� 2� 2� MR3-E60-4 484.

Power rail for vertical raceway 2� 2� 30� MR3-EVR 686.

Data Shield 1 pair MR3-DATSHD 47.

Order Code

Example: MR3-E48-4

MR3 MorrisonE Eight wire 2 + 248 For 48� panel4 Multiple outlets


Morrison 2 +2™ Raceway is afour-circuit, eight-wire modularpower distribution system, for use inMorrison panels and Network desksupports. 2 + 2™ Racewaycomponents distribute two 20-ampconvenience circuits (A and B), withneutral and ground, and twoprotected 20-amp circuits (X and Y)with separate neutral and ground.

Application Notes

Power rails are the primary powerdistribution component of theMorrison 2 + 2 Raceway. Each railprovides outlet mounting positionson both sides, and receptacles fortwo branching power connectors ateach end. Center supports permitlay-in cabling from either side of theraceway.

Rail for 24� wide panel accepts oneduplex outlet or power infeedcentered on each side. Rails for 30�and wider panels accept two outlets(or one outlet and one infeed) eachside, 12� from either end of thepanel. Multiple outlet power railsaccept up to four duplex outletseach side.

Power rail for vertical racewayaccepts up to four duplex outletseach side, two above and two belowstandard worksurface height. Powerrail for vertical raceway includespower connector from adjacentpowered panel base.

If separation of cabling andelectrical wires is required, a datashield can be attached below thepower rail. Data shields are fieldinstalled.

Morrison

88

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for panelsconnectors and jumpers


Power connector Straight 18� 2� 2� MR3-EPCM $139.Post 21� 2� 2� MR3-EPCPM 139.

Jumper 6� panel 24� 2� 2� MR3-EJ6 154.6� + 6� panel 30� 2� 2� MR3-EJ12 166.18� panel 36� 2� 2� MR3-EJ18 179.24� panel 42� 2� 2� MR3-EJ24 190.30� panel 48� 2� 2� MR3-EJ30 203.36� panel 54� 2� 2� MR3-EJ36 222.42� panel 60� 2� 2� MR3-EJ42 230.48� panel 66� 2� 2� MR3-EJ48 242.54� panel run 75� 2� 2� MR3-EJ54P 255.60� panel 81� 2� 2� MR3-EJ60P 269.66� panel run 87� 2� 2� MR3-EJ66P 279.72� panel run 93� 2� 2� MR3-EJ72P 291.78� panel run 99� 2� 2� MR3-EJ78P 312.84� panel run 105� 2� 2� MR3-EJ84P 323.90� panel run 111� 2� 2� MR3-EJ90P 331.96� panel run 117� 2� 2� MR3-EJ96P 345.

Extended jumper 6� + post 27� 2� 2� MR3-EJ6P 154.6� + post + 6� panel 33� 2� 2� MR3-EJ12P 166.18� + post 39� 2� 2� MR3-EJ18P 179.24� + post 45� 2� 2� MR3-EJ24P 190.30� + post 51� 2� 2� MR3-EJ30P 203.36� + post 57� 2� 2� MR3-EJ36P 222.42� + post 63� 2� 2� MR3-EJ42P 230.48� + post 69� 2� 2� MR3-EJ48P 242.

Order Code

Example: MR3-EPC

MR3 Morrison racewayE Eight wire 2 + 2P Power infeedC Straight



Power connectors are enclosed insteel flexible conduit.

Application Notes

Jumpers connect rails on either sideof a panel or panels without outlets.Extended jumpers for panels lessthan 60�wide (suffix -P) transmitpower through an adjacent L, T or Xpost connection. Jumpers for widerpanel runs accommodate anintermediate post connection.

Also specify extended jumper whenconnecting between verticalraceway power rail and a panel basepower rail on either side of a panelor panels without outlets.

Power connectors transmit powerbetween adjacent powered panels.Specify straight power connector forstraight connections, and post powerconnector for L, T or X postconnections.

Morrison

89

Pan

elP

lann

ing

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for panelsoutlets and infeeds

description type pattern no. list price

Duplex outlets, black Circuit A MR3-DA $63.Circuit B MR3-DB 63.Circuit X MR3-DX 63.Circuit Y MR3-DY 63.

Duplex outlets, orange Circuit X MR3-DXO 74.Circuit Y MR3-DYO 74.

Duplex outlets, black with orange triangle Circuit X MR3-DXT 74.Circuit Y MR3-DYT 74.

Duplex outlets, black with controlled symbol Circuit A MR3-DAC 70.Circuit B MR3-DBC 70.Circuit X MR3-DXC 70.Circuit Y MR3-DYC 70.

Power infeeds - Panel base(reversible)

panel base MR3-ERPI 419.SF MR3-EPSF 419.

Power infeeds - Ceiling external power pole MR3-EPIC 484.vertical raceway MR3-EPVR 419.

Order Code

Example: MR3-EPVR

MR3 Morrison racewayE Eight wire 2 + 2P Power infeedVR For vertical raceway



Duplex outlets are preconfigured toaccess one of the four circuits, A, B,X, Y, and snap into any standardoutlet location (12� from either endof panel). Duplexes on circuits Xand Y may be specified with orangeface or black face with orangetriangle to signify protected circuitsfor electronic equipment.

Application Notes

Power infeeds connect buildingpower supply to a cluster ofinterconnected power rails. Panelbase infeed snaps into any outletposition in rail, 12� from either sideof panel, and includes 6 footliquid-tight conduit and pigtail forconnection to floor or wall electricalbox. MR3-ERPI Panel Base Infeedrotates to provide either a left- orright-hand power entry.

Ceiling infeeds include12�-6�pigtail for connection intopanel base through Morrisonvertical raceway and ceiling infeedpanel, or through standard powerpole (supplied by others) adjacent toMorrison panel with power rail.

Hardwire infeed, used in all NewYork City installations, includesjunction box that mounts withinnon-powered panel base (any width24� or greater). Electrical contractorsupplies conduit from buildingpower supply to panel, punchesinfeed hole in raceway cover, andtrims power connectors to length.MR3-EPNY2 includes two powerconnectors to power panels on bothsides of infeed panel; MR3-EPNY1includes only one power connector.Template is included to modifystandard N-type raceway cover(without outlet openings).

Power infeed for Panel base for SanFrancisco installations have aliquid-tight sleeve over a metallicflexible conduit.

Morrison

90

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for panelsoutlets and infeeds


Power infeeds - hardwire NYC - one direction MR3-EPNY1 $353.NYC - two directions MR3-EPNY2 534.

Order Code

Example: MR3-EPVR

MR3 Morrison racewayE Eight wire 2 + 2P Power infeedVR For vertical raceway



Duplex outlets are preconfigured toaccess one of the four circuits, A, B,X, Y, and snap into any standardoutlet location (12� from either endof panel). Duplexes on circuits Xand Y may be specified with orangeface or black face with orangetriangle to signify protected circuitsfor electronic equipment.

Application Notes

Power infeeds connect buildingpower supply to a cluster ofinterconnected power rails. Panelbase infeed snaps into any outletposition in rail, 12� from either sideof panel, and includes 6 footliquid-tight conduit and pigtail forconnection to floor or wall electricalbox. MR3-ERPI Panel Base Infeedrotates to provide either a left- orright-hand power entry.

Ceiling infeeds include12�-6�pigtail for connection intopanel base through Morrisonvertical raceway and ceiling infeedpanel, or through standard powerpole (supplied by others) adjacent toMorrison panel with power rail.

Hardwire infeed, used in all NewYork City installations, includesjunction box that mounts withinnon-powered panel base (any width24� or greater). Electrical contractorsupplies conduit from buildingpower supply to panel, punchesinfeed hole in raceway cover, andtrims power connectors to length.MR3-EPNY2 includes two powerconnectors to power panels on bothsides of infeed panel; MR3-EPNY1includes only one power connector.Template is included to modifystandard N-type raceway cover(without outlet openings).

Power infeed for Panel base for SanFrancisco installations have aliquid-tight sleeve over a metallicflexible conduit.

Morrison

91

Pan

elP

lann

ing

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for panelsaccessories


Desktop power module From panel base MR3-NESP $611.Hardwire MR3-NESH 484.

Grommet outlet module Directly above panel outlet MR3-EGM 686.Duplex outlet, circuit A MR1-DA 51.Duplex outlet, circuit B MR1-DB 51.Hardwire MR3-EGMH 505.Up to 24� away from panel outlet MR3-EGM48 713.

Contact protectors (set of 10) MR3-CP 18.

Wire manager clips (10) Under worksurface MR1-WC 55.

High capacity wire managers (10) Panel connector ML1-HCWM24 353.

Order Code

Example: MR3-NESP

MR3 Morrison racewayN NetworkE Eight wire 2 + 2S Stanchion outletP Power feed



Duplex outlet circuits aredesignated by white letters on blackbackground.

Application Notes

Desktop power module is powercomponent for desktop powermonument or overhead supportstanchion. Power module includestwo duplex outlets and powerconnector.

Grommet outlet module stands inany Morrison (not Options)worksurface grommet for convenientaccess. Grommet outlet moduleaccepts only special duplexes(MR1-DA or MR1-DB) on circuits Aor B.

Contact protectors enclose openconductors on power rail whereveroutlets or power connectors are notplanned.

Wire manager clips are includedwith Morrison worksurfaces withgrommets.

High capacity wire manager fastensat any panel connection. Hingedflap contains 1� x 3�data/communications cables.

Morrison

92

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for panelspower rails, connectors and outlets


Power rail for panel base 24�w 6� 2� 2� MR3-T24 $279.30�w 12� 2� 2� MR3-T30NS 303.36�w 18� 2� 2� MR3-T36NS 329.42�w 24� 2� 2� MR3-T42NS 353.48�w 30� 2� 2� MR3-T48NS 367.60�w 42� 2� 2� MR3-T60NS 394.

Multiple outlet power rail 48�w 30� 2� 2� MR3-T48-4 548.60�w 42� 2� 2� MR3-T60-4 573.

Power rail for vertical raceway 2� 2� 30� MR3-TVR 813.

Power connector Straight 18� 2� 2� MR3-TPCM 179.Through post 21� 2� 2� MR3-TPCPM 179.

Duplex outlets, black Circuit A MR3-DA 63.Circuit B MR3-DB 63.Circuit C MR3-DC 63.Circuit X MR3-DX 63.Circuit Y MR3-DY 63.Circuit Z MR3-DZ 63.

Duplex outlets, orange Circuit X MR3-DXO 74.Circuit Y MR3-DYO 74.Circuit Z MR3-DZO 74.

Order Code

Example: MR3-T-24

MR3 Morrison racewayT Ten wire 3 + 324 For 24� panel


Morrison 3 +3™ Raceway is asix-circuit, ten-wire modular powerdistribution system, for use inMorrison panels and Network desksupports. 3 + 3™ Racewaycomponents distribute three 20-ampconvenience circuits (A, B, C), withneutral and ground, and threeprotected 20-amp circuits (X, Y, Z)with separate neutral and ground.

A, B, X, Y outlets are identical toeight wire, 2+2 components.


Application Notes

Power rails are the primary powerdistribution component of theMorrison 3 + 3 Raceway. Each railprovides outlet mounting positionson both sides, and receptacles forbranching power connectors at eachend. Center supports permit lay-incabling from either side of theraceway. Rail for 24� wide panelaccepts one duplex outlet or powerinfeed on either side. Rails for 30�and wider panels accept two outletseach side, 12� from either end of thepanel. Power rail for VerticalRaceway panel accepts up to fourduplex outlets each side, two aboveand two below standard worksurfaceheight.


Duplex outlets are preconfigured toaccess one of the six circuits, A, B,C, X, Y, Z, and snap into anystandard outlet location (12� fromeither end of panel). Duplexes oncircuits X, Y, and Z may bespecified with an orange face, orblack face with orange triangle tosignify protected circuits forelectronic equipment; all otherduplexes are black.


Morrison

93

Pan

elP

lann

ing

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for panelspower rails, connectors and outlets


Data Shield 1 pair MR3-DATSHD $47.

Duplex outlets, black with orange triangle Circuit X MR3-DXT 74.Circuit Y MR3-DYT 74.Circuit Z MR3-DZT 74.

Duplex outlets, black with controlled symbol Circuit A MR3-DAC 70.Circuit B MR3-DBC 70.Circuit C MR3-DCC 66.Circuit X MR3-DXC 70.Circuit Y MR3-DYC 70.Circuit Z MR3-DZC 66.

Order Code

Example: MR3-T-24

MR3 Morrison racewayT Ten wire 3 + 324 For 24� panel



A, B, X, Y outlets are identical toeight wire, 2+2 components.


Application Notes

Power rails are the primary powerdistribution component of theMorrison 3 + 3 Raceway. Each railprovides outlet mounting positionson both sides, and receptacles forbranching power connectors at eachend. Center supports permit lay-incabling from either side of theraceway. Rail for 24� wide panelaccepts one duplex outlet or powerinfeed on either side. Rails for 30�and wider panels accept two outletseach side, 12� from either end of thepanel. Power rail for VerticalRaceway panel accepts up to fourduplex outlets each side, two aboveand two below standard worksurfaceheight.


Duplex outlets are preconfigured toaccess one of the six circuits, A, B,C, X, Y, Z, and snap into anystandard outlet location (12� fromeither end of panel). Duplexes oncircuits X, Y, and Z may bespecified with an orange face, orblack face with orange triangle tosignify protected circuits forelectronic equipment; all otherduplexes are black.


Morrison

94

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for panelspower infeeds


Power infeeds - Panel base(reversible)

SF MR3-TPSF $484.Panel base MR3-TRPI 484.

Ceiling infeed external power pole MR3-TPIC 591.vertical raceway MR3-TPVR 484.

Harwire infeed NYC - one direction MR3-TPNY1 410.NYC - two directions MR3-TPNY2 591.

Order Code

Example: MR3-TPVR

MR3 Morrison racewayT Ten wire 3 + 3P Power infeedVR For vertical raceway


Morrison 3 +3™ Raceway is afour-circuit, eight-wire modularpower distribution system, for use inMorrison panels and Network desksupports. 3 + 3™ Racewaycomponents distribute three 20-ampconvenience circuits (A, B, C), withneutral and ground, and threeprotected 20-amp circuits (X, Y, Z)with separate neutral and ground.

Application Notes

Power infeeds connect buildingpower supply to a cluster ofinterconnected power rails. Panelbase infeed snaps into any outletposition in rail, 12� from either sideof panel, and includes 6 footliquid-tight conduit and pigtail forconnection to floor or wall electricalbox. MR3-TRPI Panel Base Infeedrotates to provide either a left- orright-hand power entry.

Ceiling infeeds include 12’-6�pigtail for connection into panelbase through Morrison verticalraceway and ceiling infeed panel, orthrough standard power pole(supplied by others) adjacent toMorrison panel with power rail.

Hardwire infeed, used in all NewYork City installations, includesjunction box that mounts withinnon-powered panel base (any width24� or greater). Electrical contractorsupplies conduit from buildingpower supply to panel, punchesinfeed hole in raceway cover, andtrims power connectors to length.

MR3-TPNY2 includes two powerconnectors to power panels on bothsides of infeed panel; MR3-TPNY1includes only one power connector.Template is included to modifystandard N-type raceway cover(without outlet openings).

Power infeed for panel base for SanFrancisco installations have aliquid-tight sleeve over a metallicconduit.

Morrison

95

Pan

elP

lann

ing

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for panelsjumpers


Jumper 18� panel 36� 2� 2� MR3-TJ18 $203.24� panel 42� 2� 2� MR3-TJ24 222.30� panel 48� 2� 2� MR3-TJ30 230.36� panel 54� 2� 2� MR3-TJ36 242.42� panel 60� 2� 2� MR3-TJ42 269.48� panel 66� 2� 2� MR3-TJ48 291.54� panel run 75� 2� 2� MR3-TJ54P 312.6� + 6� panel 30� 2� 2� MR3-TJ12 190.60� panel 81� 2� 2� MR3-TJ60P 323.66� desk 87� 2� 2� MR3-TJ66P 349.72� panel run 93� 2� 2� MR3-TJ72P 345.78� desk 99� 2� 2� MR3-TJ78P 372.84� panel run 105� 2� 2� MR3-TJ84P 385.90� panel run 111� 2� 2� MR3-TJ90P 396.96� panel run 117� 2� 2� MR3-TJ96P 410.

Extended jumper 18� + post 39� 2� 2� MR3-TJ18P 203.24� + post 45� 2� 2� MR3-TJ24P 222.30� + post 51� 2� 2� MR3-TJ30P 230.36� + post 57� 2� 2� MR3-TJ36P 242.42� + post 63� 2� 2� MR3-TJ42P 269.48� + post 69� 2� 2� MR3-TJ48P 291.6� + post 27� 2� 2� MR3-TJ6P 179.6� + post + 6� panel 33� 2� 2� MR3-TJ12P 190.

Power connector Crossover 24� 2� 2� MR3-TJ6 189.

Order Code

Example: MR3-TJ30

MR3 Morrison racewayT Ten wire 3 + 3J Jumper30 Type


Morrison 3 +3™ Raceway is afour-circuit, eight-wire modularpower distribution system, for use inMorrison panels and Network desksupports. 3 + 3™ Racewaycomponents distribute three 20-ampconvenience circuits (A, B, C), withneutral and ground, and threeprotected 20-amp circuits (X, Y, Z)with separate neutral and ground.

Application Notes

Jumpers connect rails on either sideof a panel or panels without outlets.Extended jumpers for panels lessthan 60�wide (suffix -P) transmitpower through an adjacent L, T or Xpost connection. Jumpers for widerpanel runs accommodate anintermediate post connection.

Also specify extended jumper whenconnecting between verticalraceway power rail and a panel basepower rail on either side of a panelor panels without outlets.

Morrison

96

Power distribution componentsPDC Components


PDC module extension kit Set of 10 MR3-PDC-X $223.

PDC blank filler Set of 10 MN2-OF 64.

Under worksurface PDC mounting bracket MR3-UW-PDC 139.

Order Code

Example: MR3-UW-PDC

MR3 Morrison racewayUW PositionPDC Application

Application Notes

PDC module extension kit is 1/2�spacer between module and racewaycover, providing more depth forcables and connections insideraceway.

PDC blank filler is black texturedcover for unused outlet openings.

Under worksurface PDC bracketmounts anywhere under aworksurface to support two PDCmodules with faceplate.

Morrison

97

Pan

elP

lann

ing

Power distribution componentsPDC™ RacewayTerminator and outlets


PDC terminator 4� 2� 3� MA1-PDC-T $84.

Terminator adapter for ATT outlets 4� 2� 3� MA1-TATT2 47.4� 2� 3� MA1-TATT3 47.

Order Code

Example: MA1-PDC-T

MA1 Morrison AccessPDC ApplicationT Terminator


Terminator is textured black plastic.

Application Notes

Terminator is two-part moldedplastic housing for data andcommunications outlets.

Terminator protects outlets andimproves access to connections.

Terminator adheres to raceway overPDC outlet opening or subway.

Separate outlet components fit onlythe Terminator, which includes afaceplate with two outlet openings.

Other outlet combinations areavailable on special request.

Morrison

98

Power distribution componentsPorted paneldata port, outlets, raceway connectors


Floating data port kit MR3-FDP $87.

Vertical power port bracket kit MR3-VPBK 146.

Vertical duplex outlet Black Circuit A MR3-VDA 63.Circuit B MR3-VDB 63.Circuit C MR3-VDC 63.Circuit X MR3-VDX 63.Circuit Y MR3-VDY 63.Circuit Z MR3-VDZ 63.

Vertical duplex outlet Orange Circuit X MR3-VDXO 74.Circuit Y MR3-VDYO 74.Circuit Z MR3-VDZO 74.

Vertical duplex outlet Black with Orange triangle Circuit X MR3-VDXT 74.Circuit Y MR3-VDYT 74.Circuit Z MR3-VDZT 74.

Vertical duplex outlet, black with controlledsymbol

Circuit A MR3-VDAC 63.Circuit B MR3-VDBC 63.Circuit C MR3-VDCC 63.Circuit X MR3-VDXC 63.Circuit Y MR3-VDYC 63.Circuit Z MR3-VDZC 63.

Order Code

Example: MR3-VPBK

MR3 MorrisonVP ApplicationBK Bracket kit


Ported panel electrical componentsconnect to 2+2, four circuit and3+3, six-circuit racewaycomponents to deliverworksurface-height outlets withinthe ported panel frame.

Floating data port allows data andcommunication outlets to bemounted at any location on theported panel face except directlyabove or below electrical outlets.

Floating data ports include front andback mounting plates.

PDC modules ( faceplates andoutlets ) are specified separately.

Vertical power and data ports forported panel are black finish andrequire field cutting the panel insertfor installation.

Application Notes

Vertical power port bracket kitincludes an outlet mountingbracket, a cover mounting bracketand cover plate. Outlet mountingbracket attaches to vertical rails ofpanel frame.

Vertical duplex outlets arededicated for ported panelapplication and are preconfigured toaccess the circuit indicated by theletter on the outlet face. All outletsare black with white letters. Outletsfor circuits X,Y and Z are availablewith orange face and black face withorange triangle to signify protectedcircuits for electronic equipment.Base raceway duplex outlets will notwork in vertical port applications.

Vertical duplex outlets areone-sided only and must be orderedseparately from the bracket kit.

Ported panel connectors powervertical duplex outlets by joiningthem to the base raceway of thesame or adjacent panel.MR3-TVBPC connects a base raceway railwith a vertical duplex outlet in thesame panel or mounted on the nearside of the adjacent ported panel.

MR3-TV24, 36, 48 PC connect abase raceway rail with a verticalduplex outlet mounted on the farside of, respectively, 18�-24�,30�-36�, or 42�-48� wide portedpanels.

MR3-EVI J connects two verticalduplex outlets of the same circuitinside the ported panel frame.

Based on connector lengths, theintended location of the centerlineof the vertical duplex outlet is 32�from the floor.

Morrison

99

Pan

elP

lann

ing

Power distribution componentsPorted paneldata port, outlets, raceway connectors


2 + 2 raceway connectors Base of adjacent panel to far side of 18�,24�Wpanel

MR3-EV24 PC $230.

Base of adjacent panel to far side of 30�,36�Wpanel

MR3-EV36 PC 255.


MR3-EV48 PC 277.

Base of same panel, adjacent panel to near side MR3-EVB PC 211.Internal jumper to same circuit outlet MR3-EVI J 230.

3 + 3 raceway connectors Base of adjacent panel to far side of 18�,24�Wpanel

MR3-TV24 PC 269.


MR3-TV36 PC 312.


MR3-TV48 PC 331.

Base of same panel, adjacent panel to near side MR3-TVB PC 230.Internal jumper to same circuit outlet MR3-TVI J 255.

Order Code

Example: MR3-VPBK

MR3 MorrisonVP ApplicationBK Bracket kit


Ported panel electrical componentsconnect to 2+2, four circuit and3+3, six-circuit racewaycomponents to deliverworksurface-height outlets withinthe ported panel frame.

Floating data port allows data andcommunication outlets to bemounted at any location on theported panel face except directlyabove or below electrical outlets.

Floating data ports include front andback mounting plates.

PDC modules ( faceplates andoutlets ) are specified separately.

Vertical power and data ports forported panel are black finish andrequire field cutting the panel insertfor installation.

Application Notes

Vertical power port bracket kitincludes an outlet mountingbracket, a cover mounting bracketand cover plate. Outlet mountingbracket attaches to vertical rails ofpanel frame.

Vertical duplex outlets arededicated for ported panelapplication and are preconfigured toaccess the circuit indicated by theletter on the outlet face. All outletsare black with white letters. Outletsfor circuits X,Y and Z are availablewith orange face and black face withorange triangle to signify protectedcircuits for electronic equipment.Base raceway duplex outlets will notwork in vertical port applications.

Vertical duplex outlets areone-sided only and must be orderedseparately from the bracket kit.

Ported panel connectors powervertical duplex outlets by joiningthem to the base raceway of thesame or adjacent panel.MR3-TVBPC connects a base raceway railwith a vertical duplex outlet in thesame panel or mounted on the nearside of the adjacent ported panel.

MR3-TV24, 36, 48 PC connect abase raceway rail with a verticalduplex outlet mounted on the farside of, respectively, 18�-24�,30�-36�, or 42�-48� wide portedpanels.

MR3-EVI J connects two verticalduplex outlets of the same circuitinside the ported panel frame.

Based on connector lengths, theintended location of the centerlineof the vertical duplex outlet is 32�from the floor.

Morrison

100

Power distribution2+2™ Racewayhardwire raceway components


Power infeed kit Hardwire, Chicago MR2-PICHI $532.

Hardwire receptacles kit for panel base 24�W MR2-CHI-24 255.30�W MR2-CHI-30 279.36�W MR2-CHI-36 312.42�W MR2-CHI-42 331.48�W MR2-CHI-48 353.60�W MR2-CHI-60 385.

Bridge connector Straight connections only MR2-CHI-PT 39.

Hardwire outlet box for stanchion or desktopmonument

MR2-NS-CHI 102.

Hardwire receptacles kit for vertical racewaypanel, two outlets above and two belowworksurface

42�H, 56�H, 64�H, 74�H panel MR2-RVR42-H4( ) 534.48�H panel MR2-RVR48-H4( ) 534.

Hardwire receptacles kit for vertical racewaypanel, two outlets above worksurface

42�H, 56�H, 64�H, 74�H panel MR2-RVR42-H2( ) 433.48�H panel MR2-RVR48-H2( ) 433.

Order Code

Example: MR2-CHI-24

MR2 Power componentCHI Chicago hardwire24 Panel width


Hardwire raceway components areapproved for use in City of Chicagoinstallations.

Application Notes

Hardwire infeed and receptacleskits are field-installed in anyMorrison vertical panel base widerthan 18�.

Hardwire infeed consists ofcode-approved electrical box withmounting bracket.

Electrical contractor supplieswatertight conduit from buildingpower supply to panel base,punches infeed hole in standardnon-powered raceway cover, andsupplies flexible conduit for allpanel-to-panel power connections.

Receptacles kit includes full widthcable tray, forming a continuoussteel septum between power anddata/telecommunications cables.

Receptacles kits and hardwirecovers accommodate standardDecora-type architectural duplexoutlets on one or both sides, 12�from each end of panel.

Hardwire outlet openings are in thesame position as 2+2 modularraceway outlets. Top cap andraceway cover kits for hardwireraceway include two screws toenclose cable tray as code-approvedelectrical box.

Bridge connector mechanicallyconnects adjacent receptacles kits,eliminating flexible conduitbetween hardwired panels in astraight connection.

Hardwire components do notinclude wire, outlets, cable conduit,or fittings.

Hardwire receptacles kits forvertical raceway panel include facecovers.

Morrison

101

Pan

elP

lann

ing

Power distributionhardwire raceway components

description type w d h pattern no. Paint PV1 PV2

Top cap and raceway cover kits, hardwire With outlet plates 24� 4� MT6-E24-( )( )-CHI $17. $17. $271.30� 4� MT6-E30-( )( )-CHI 18. 18. 282.36� 4� MT6-E36-( )( )-CHI 19. 19. 312.42� 4� MT6-E42-( )( )-CHI 23. 23. 325.48� 4� MT6-E48-( )( )-CHI 23. 23. 335.60� 4� MT6-E60-( )( )-CHI 36. 36. 369.

PDC raceway cover with hardwire outlet openings 24� 4� MT6-PDC24-( )( )-CH 50.30� 4� MT6-PDC30-( )( )-CH 54.36� 4� MT6-PDC36-( )( )-CH 61.42� 4� MT6-PDC42-( )( )-CH 63.48� 4� MT6-PDC48-( )( )-CH 65.60� 4� MT6-PDC60-( )( )-CH 76.

Order Code

Example: MT6-E24-612-612-CHI

MT6 Top cap/coversE Powered24 Width612 Top cap finish612 Raceway finishCHI Chicago hardware


Specify finish for top cap andraceway cover.

Application Notes

For combinations of wood top capswith hardwire raceway covers, inserttop cap finish before raceway coverfinish.

Hardwire raceway components areapproved for use in City of Chicagoinstallations.

Receptacles kits and hardwirecovers accommodate standardDecora-type architectural duplexoutlets on one or both sides, 12�from each end of panel.

Hardwire outlet openings are in thesame position as 2+2 modularraceway outlets. Top cap andraceway cover kits for hardwireraceway include two screws toenclose cable tray as code-approvedelectrical box.

Morrison

102

Worksurfaces, 1 3/418�D

description type w d h pattern no. lam. V1 V2

Straight, 18�D No grommets 30� 175/8� 13/4� MW2-S3018-B-( ) $558. $821. $1,154.36� 175/8� 13/4� MW2-S3618-B-( ) 613. 880. 1,242.42� 175/8� 13/4� MW2-S4218-B-( ) 675. 963. 1,382.48� 175/8� 13/4� MW2-S4818-B-( ) 757. 1,040. 1,498.54� 175/8� 13/4� MW2-S5418-B-( ) 811. 1,132. 1,613.60� 175/8� 13/4� MW2-S6018-B-( ) 836. 1,182. 1,728.66� 175/8� 13/4� MW2-S6618-B-( ) 928. 1,328. 1,929.72� 175/8� 13/4� MW2-S7218-B-( ) 1,010. 1,475. 2,105.

Order Code

Example: MW2-S3618-B-117

MW2 Worksurface 13/4� thickS Worksurface type36 Width18 DepthB No grommets117 Surface finish


B: Worksurface does not includegrommets

Specify surface finish

All worksurfaces are U.L.-listed.

Application Notes

18�D worksurfaces are usedinterchangeably in desk and panelsystem applications as shallow mainsurfaces, extensions, or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 60� between supports.

All worksurfaces have threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.

MW2- worksurfaces are supportedby brackets with machine screws.

Panel supported worksurfaces over60� must be mid-span supported byMB2-C18 bracket, specifiedseparately.

18�D worksurfaces with desksupports or filler panels do notaccept pedestals.

All worksurfaces are3/8� less thannominal depth for rear wireclearance or privacy screens.

Morrison

103

Wor

ksur

face

Pla

nnin

g



Straight, 24�D Grommets 24� 235/8� 13/4� MW2-S2424-A-( ) $678. $1,021. $1,382.30� 235/8� 13/4� MW2-S3024-A-( ) 734. 1,051. 1,439.36� 235/8� 13/4� MW2-S3624-A-( ) 793. 1,108. 1,501.42� 235/8� 13/4� MW2-S4224-A-( ) 878. 1,161. 1,617.48� 235/8� 13/4� MW2-S4824-A-( ) 932. 1,277. 1,791.54� 235/8� 13/4� MW2-S5424-A-( ) 989. 1,388. 1,936.60� 235/8� 13/4� MW2-S6024-A-( ) 1,070. 1,479. 2,047.66� 235/8� 13/4� MW2-S6624-A-( ) 1,155. 1,617. 2,252.72� 235/8� 13/4� MW2-S7224-A-( ) 1,270. 1,757. 2,483.78� 235/8� 13/4� MW2-S7824-A-( ) 1,379. 1,898. 2,651.84� 235/8� 13/4� MW2-S8424-A-( ) 1,461. 2,040. 2,853.90� 235/8� 13/4� MW2-S9024-A-( ) 1,573. 2,210. 3,114.96� 235/8� 13/4� MW2-S9624-A-( ) 1,721. 2,436. 3,402.

Straight, 24�D - No grommets No grommets 24� 235/8� 13/4� MW2-S2424-B-( ) 558. 902. 1,268.30� 235/8� 13/4� MW2-S3024-B-( ) 613. 934. 1,327.36� 235/8� 13/4� MW2-S3624-B-( ) 675. 990. 1,382.42� 235/8� 13/4� MW2-S4224-B-( ) 757. 1,040. 1,498.48� 235/8� 13/4� MW2-S4824-B-( ) 811. 1,157. 1,673.54� 235/8� 13/4� MW2-S5424-B-( ) 875. 1,272. 1,818.60� 235/8� 13/4� MW2-S6024-B-( ) 950. 1,363. 1,929.66� 235/8� 13/4� MW2-S6624-B-( ) 1,037. 1,498. 2,132.72� 235/8� 13/4� MW2-S7224-B-( ) 1,146. 1,642. 2,366.78� 235/8� 13/4� MW2-S7824-B-( ) 1,261. 1,779. 2,539.84� 235/8� 13/4� MW2-S8424-B-( ) 1,348. 1,921. 2,738.90� 235/8� 13/4� MW2-S9024-B-( ) 1,453. 2,094. 2,995.96� 235/8� 13/4� MW2-S9624-B-( ) 1,597. 2,321. 3,285.

Order Code

Example: MW2-S7224-A-117

MW2 Worksurface, 13/4� thickS Straight worksurface72 Width24 DepthA Grommets117 Surface finish


Grommets/no grommets:A- Worksurfaces include 3�

grommet in each backcorner leading into desksupport or wire manager.

B- Worksurface does notinclude grommets.

Specify surface finish


Application Notes

24�D worksurfaces are usedinterchangeably as shallow mainsurfaces,extensions or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 60� between supports.

All worksurfaces have threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.


Use 18�D pedestals with 24�Dworksurfaces for full wiremanagement capability in desk orpanel applications.

All straight worksurfaces are3/8� lessthan nominal depth for rear wireclearance or privacy screens.

Plastic laminate worksurfaces arepost-formed top and bottom, frontand back.

Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.


Morrison

104



Straight, 30�D Grommets 30� 295/8� 13/4� MW2-S3030-A-( ) $817. $1,136. $1,589.36� 295/8� 13/4� MW2-S3630-A-( ) 903. 1,220. 1,706.42� 295/8� 13/4� MW2-S4230-A-( ) 958. 1,307. 1,818.48� 295/8� 13/4� MW2-S4830-A-( ) 1,040. 1,419. 1,958.54� 295/8� 13/4� MW2-S5430-A-( ) 1,094. 1,529. 2,070.60� 295/8� 13/4� MW2-S6030-A-( ) 1,155. 1,617. 2,252.66� 295/8� 13/4� MW2-S6630-A-( ) 1,243. 1,729. 2,449.72� 295/8� 13/4� MW2-S7230-A-( ) 1,379. 1,898. 2,651.78� 295/8� 13/4� MW2-S7830-A-( ) 1,492. 2,070. 2,880.84� 295/8� 13/4� MW2-S8430-A-( ) 1,604. 2,240. 3,145.90� 295/8� 13/4� MW2-S9030-A-( ) 1,747. 2,460. 3,487.96� 295/8� 13/4� MW2-S9630-A-( ) 1,913. 2,690. 3,831.

Straight 30�D - no grommets No grommets 30� 295/8� 13/4� MW2-S3030-B-( ) 705. 1,020. 1,475.36� 295/8� 13/4� MW2-S3630-B-( ) 787. 1,105. 1,588.42� 295/8� 13/4� MW2-S4230-B-( ) 836. 1,182. 1,705.48� 295/8� 13/4� MW2-S4830-B-( ) 925. 1,294. 1,843.54� 295/8� 13/4� MW2-S5430-B-( ) 981. 1,416. 1,955.60� 295/8� 13/4� MW2-S6030-B-( ) 1,037. 1,498. 2,132.66� 295/8� 13/4� MW2-S6630-B-( ) 1,125. 1,613. 2,334.72� 295/8� 13/4� MW2-S7230-B-( ) 1,261. 1,779. 2,539.78� 295/8� 13/4� MW2-S7830-B-( ) 1,376. 1,955. 2,764.84� 295/8� 13/4� MW2-S8430-B-( ) 1,488. 2,121. 3,024.90� 295/8� 13/4� MW2-S9030-B-( ) 1,627. 2,342. 3,375.96� 295/8� 13/4� MW2-S9630-B-( ) 1,789. 2,564. 3,716.

Order Code

Example: MW2-S4230A-117

MW2 Worksurface, 13/4� thickS Straight worksurface42 Width30 DepthA Grommets117 Surface finish


Grommets/no grommets:A- worksurface includes 3�

grommet in each backcorner leading into desksupport or wire managerclips.

B- worksurface does not includegrommets

Specify surface finish.


Application Notes

30�D worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces, extensions or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 60� between supports.





Morrison

105

Wor

ksur

face

Pla

nnin

g



Straight, 36�D Recessed grommets 66� 355/8� 13/4� MW2-S6636-R-( ) $1,517. $2,040. $2,797.72� 355/8� 13/4� MW2-S7236-R-( ) 1,604. 2,210. 3,114.78� 355/8� 13/4� MW2-S7836-R-( ) 1,747. 2,410. 3,313.

Straight 36�D - no grommets No grommets 66� 355/8� 13/4� MW2-S6636-B-( ) 1,398. 1,921. 2,682.72� 355/8� 13/4� MW2-S7236-B-( ) 1,488. 2,094. 2,995.78� 355/8� 13/4� MW2-S7836-B-( ) 1,627. 2,294. 3,199.

Order Code

Example: MW2-S6636R-117

MW2 Worksurface, 13/4� thickS Straight worksurface66 Width36 DepthR Grommets117 Surface finish


Grommets/no grommets:B- worksurface does not include

grommetsR- worksurface includes 3�

grommets recessed for usewith 6� recessed desksupport.

Specify surface finish.All worksurfaces are U.L.-listed.

Application Notes

36�D desks may be planned with 6�recessed desk support and 24�Dpedestals or end panels, or 29� or35�W universal end panels withkneehole filler. 36�D worksurfacesdo not accept privacy screens.





Morrison

106

Worksurfaces, 1 3/4VDT corners


Corner Corner grommet only 355/8� 175/8� 13/4� MW2-V3618-A-( ) $1,439. $1,804. $2,546.Corner grommet only 355/8� 235/8� 13/4� MW2-V3624-A-( ) 1,498. 1,828. 2,606.Corner grommet only 415/8� 235/8� 13/4� MW2-V4224-A-( ) 1,551. 1,916. 2,715.Corner grommet only 415/8� 295/8� 13/4� MW2-V4230-A-( ) 1,639. 2,028. 2,880.Corner grommet only 475/8� 235/8� 13/4� MW2-V4824-A-( ) 1,831. 2,190. 3,199.Corner grommet only 475/8� 295/8� 13/4� MW2-V4830-A-( ) 1,919. 2,357. 3,364.

Corner - 3 grommets 3 grommets 355/8� 235/8� 13/4� MW2-V3624-C-( ) 1,617. 1,952. 2,716.415/8� 235/8� 13/4� MW2-V4224-C-( ) 1,669. 2,032. 2,834.415/8� 295/8� 13/4� MW2-V4230-C-( ) 1,757. 2,143. 3,001.475/8� 235/8� 13/4� MW2-V4824-C-( ) 1,945. 2,308. 3,313.475/8� 295/8� 13/4� MW2-V4830-C-( ) 2,037. 2,479. 3,483.

Order Code

Example: MW2-V4830-C-117

MW2 Worksurface, 13/4� thickV VDT corner48 Width30 Depth of returnC Three grommets117 Surface finish


Grommets/no grommets:A- VDT corner includes 3�

grommet in back corner.C- VDT corner includes 3�

grommet in all three backcorners.

Specify surface finish.VDT worksurfaces have threadedmetal inserts at all desk support andbracket locations.



All VDT corner worksurfaces arebored to accept and are shippedwith wire manager clips.

Application Notes

VDT corners may be usedinterchangeably in desk and panelsystem applications. They must besupported by VDT support bracketson each back edge or cantileverbridging brackets on each side edgeand a cantilever bracket on the backcorner.

36�W x 18�D VDT corners accept18�D returns, 36�, 42�, and 48�W x24�D VDT corners accept 24�Dreturns, 42� and 48�W x 30�D VDTcorners accept 30�D returns.

VDT corners are3/8� less thannominal depth for rear wireclearance or privacy screens.

Plastic laminate worksurfaces arepost-formed on front and backedges. 48� x 24� VDT corners havean inside radius, T-mold front edgethat curves into an optimal 45°straight keyboard location.

Morrison

107

Wor

ksur

face

Pla

nnin

g

Worksurfaces, 1 3/4rounded end, 30�D

description w d h pattern no. paint lam. V1 V2

30�D - End grommets 63� 30� 13/4� MW2-R6330E( ) $2,246. $2,945. $4,181.75� 30� 13/4� MW2-R7530E( ) 2,332. 3,072. 4,299.87� 30� 13/4� MW2-R8730E( ) 2,495. 3,173. 4,504.

30�D - No grommets 63� 30� 13/4� MW2-R6330B( )(L/R) 2,122. 2,827. 4,062.75� 30� 13/4� MW2-R7530B( )(L/R) 2,209. 2,941. 4,176.87� 30� 13/4� MW2-R8730B( )(L/R) 2,377. 3,056. 4,382.

Support column 5� – 27� MM2-L26( ) 273.

Order Code

Example: MW2-R8730E-117

MW2 Worksurface, 13/4� thickR Rounded end87 Width30 DepthE End grommets117 Surface finish



grommets.E- rounded end worksurface

includes 3� grommet ineach straight end corner.

R- rounded end worksurfaceincludes 3� grommetsrecessed for use with 6�recessed desk support.


Rounded end worksurfaces withrecessed or no grommets arespecified left or right to determineposition of grommets and pedestaldrilling. Rounded end when seatedat desk defines L/R hand (Righthand shown above). Allworksurfaces are U.L.-listed.

Recessed grommets align with desksupport recessed 6�.

Application Notes

Rounded end worksurfaces may beused to create fully enclosed desksor open table/desks with supportcolumn. For front modesty, use48�W desk support with 63�rounded end, 60�W desk supportwith 75� rounded end; 72�W desksupport with 87� rounded end.

Use 18�D pedestal or end paneleach end with 30�D rounded endwith recessed grommets. Roundedend worksurfaces with endgrommets are supported by 30�W or36�W desk support and supportcolumn.


Worksurfaces with end grommetsmay not be supported by conferenceend panels.

Plastic laminate worksurfaces haveradiused T-mold edge.

Rounded end worksurfaces havethreaded metal inserts for desksupport, end panel each end, and atall bracket locations. End grommetworksurfaces have no pedestalinserts.


Morrison

108



Straight, 18�D No grommets 30� 175/8� 11/4� MU1-S3018-B-( ) $433. $671. $981.36� 175/8� 11/4� MU1-S3618-B-( ) 479. 723. 1,057.42� 175/8� 11/4� MU1-S4218-B-( ) 501. 783. 1,168.48� 175/8� 11/4� MU1-S4818-B-( ) 589. 865. 1,279.54� 175/8� 11/4� MU1-S5418-B-( ) 613. 916. 1,361.60� 175/8� 11/4� MU1-S6018-B-( ) 641. 971. 1,473.66� 175/8� 11/4� MU1-S6618-B-( ) 693. 1,081. 1,629.72� 175/8� 11/4� MU1-S7218-B-( ) 773. 1,211. 1,796.

Order Code

Example: MU1-S4818-B-117

MU1 Worksurface 11/4� thickS Worksurface type48 Width18 DepthB No grommets117 Surface finish


B: Worksurface does not includegrommets.


11/4� worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.


MU1- worksurfaces are supportedby brackets with machine screws.

Application Notes

18�D worksurfaces are usedinterchangeably in desk and panelsystem applications as shallow mainsurfaces, extensions, or credenzatops. They may be supported at eachend by an 18 ‘‘ end support bracket,18� cantilever bracket, 18�Wconference end panel, 18�Dpedestal, or 12�W end panel(MN2-E12) in conjunction with adesk support.

18�D worksurfaces with desksupports do not accept pedestals.


Panel-supported 11/4� worksurfacesover 48� must be mid-spansupported by MB2-C18 bracket,specified separately.

Suspended pedestals may not beused with 11/4� worksurfaces.

Morrison

109

Wor

ksur

face

Pla

nnin

g


description w d h pattern no. lam. V1 V2

Straight, 24�D - Grommets 24� 235/8� 11/4� MU1-S2424-A-( ) $548. $875. $1,204.30� 235/8� 11/4� MU1-S3024-A-( ) 595. 899. 1,259.36� 235/8� 11/4� MU1-S3624-A-( ) 621. 922. 1,285.42� 235/8� 11/4� MU1-S4224-A-( ) 705. 978. 1,389.48� 235/8� 11/4� MU1-S4824-A-( ) 726. 1,055. 1,557.54� 235/8� 11/4� MU1-S5424-A-( ) 787. 1,161. 1,666.60� 235/8� 11/4� MU1-S6024-A-( ) 835. 1,219. 1,747.66� 235/8� 11/4� MU1-S6624-A-( ) 916. 1,359. 1,937.72� 235/8� 11/4� MU1-S7224-A-( ) 998. 1,458. 2,129.78� 235/8� 11/4� MU1-S7824-A-( ) 1,085. 1,588. 2,276.84� 235/8� 11/4� MU1-S8424-A-( ) 1,156. 1,703. 2,443.90� 235/8� 11/4� MU1-S9024-A-( ) 1,228. 1,810. 2,606.96� 235/8� 11/4� MU1-S9624-A-( ) 1,342. 1,980. 2,853.

Straight, 24�D - No grommets 24� 235/8� 11/4� MU1-S2424-B-( ) 433. 757. 1,090.30� 235/8� 11/4� MU1-S3024-B-( ) 479. 783. 1,145.36� 235/8� 11/4� MU1-S3624-B-( ) 501. 811. 1,168.42� 235/8� 11/4� MU1-S4224-B-( ) 589. 865. 1,279.48� 235/8� 11/4� MU1-S4824-B-( ) 613. 943. 1,443.54� 235/8� 11/4� MU1-S5424-B-( ) 669. 1,052. 1,554.60� 235/8� 11/4� MU1-S6024-B-( ) 722. 1,105. 1,629.66� 235/8� 11/4� MU1-S6624-B-( ) 800. 1,243. 1,825.72� 235/8� 11/4� MU1-S7224-B-( ) 883. 1,349. 2,012.78� 235/8� 11/4� MU1-S7824-B-( ) 961. 1,473. 2,160.84� 235/8� 11/4� MU1-S8424-B-( ) 1,038. 1,587. 2,330.90� 235/8� 11/4� MU1-S9024-B-( ) 1,110. 1,697. 2,491.96� 235/8� 11/4� MU1-S9624-B-( ) 1,222. 1,861. 2,738.

Order Code

Example: MU1-S3024-B-117

MU1 Worksurface, 11/4� thickS Straight worksurface30 Width24 DepthB No grommets117 Surface finish


Grommets/no grommets:A- Worksurfaces include 3�

grommet in each backcorner leading into desksupport or wire manager.

B- Worksurface does notinclude grommets.

Specify surface finish.11/4� worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.




Application Notes

24�D worksurfaces are usedinterchangeably as shallow mainsurfaces, extensions or credenzatops. They can be supported at eachend by 24� end support bracket, 24�cantilever bracket, 24�W end panel,18�D pedestal or end panel inconjunction with desk support.

Use 18�D pedestals with 24�Dworksurfaces for full wiremanagement capability in desk orpanel applications.




Morrison

110



Straight, 30�D - Grommets 30� 295/8� 11/4� MU1-S3030-A-( ) $653. $948. $1,366.36� 295/8� 11/4� MU1-S3630-A-( ) 705. 1,006. 1,451.42� 295/8� 11/4� MU1-S4230-A-( ) 759. 1,087. 1,557.48� 295/8� 11/4� MU1-S4830-A-( ) 810. 1,161. 1,666.54� 295/8� 11/4� MU1-S5430-A-( ) 865. 1,270. 1,803.60� 295/8� 11/4� MU1-S6030-A-( ) 916. 1,359. 1,937.66� 295/8� 11/4� MU1-S6630-A-( ) 966. 1,435. 2,101.72� 295/8� 11/4� MU1-S7230-A-( ) 1,073. 1,570. 2,262.78� 295/8� 11/4� MU1-S7830-A-( ) 1,158. 1,703. 2,492.84� 295/8� 11/4� MU1-S8430-A-( ) 1,251. 1,835. 2,693.90� 295/8� 11/4� MU1-S9030-A-( ) 1,323. 1,949. 2,869.96� 295/8� 11/4� MU1-S9630-A-( ) 1,437. 2,118. 3,118.

Straight, 30�D - No grommets 30� 295/8� 11/4� MU1-S3030-B-( ) 538. 831. 1,254.36� 295/8� 11/4� MU1-S3630-B-( ) 589. 890. 1,338.42� 295/8� 11/4� MU1-S4230-B-( ) 641. 971. 1,443.48� 295/8� 11/4� MU1-S4830-B-( ) 693. 1,052. 1,554.54� 295/8� 11/4� MU1-S5430-B-( ) 743. 1,155. 1,691.60� 295/8� 11/4� MU1-S6030-B-( ) 800. 1,243. 1,825.66� 295/8� 11/4� MU1-S6630-B-( ) 850. 1,316. 1,986.72� 295/8� 11/4� MU1-S7230-B-( ) 958. 1,454. 2,146.78� 295/8� 11/4� MU1-S7830-B-( ) 1,040. 1,587. 2,377.84� 295/8� 11/4� MU1-S8430-B-( ) 1,132. 1,718. 2,575.90� 295/8� 11/4� MU1-S9030-B-( ) 1,212. 1,837. 2,754.96� 295/8� 11/4� MU1-S9630-B-( ) 1,319. 2,002. 3,005.

Order Code

Example: MU1-S3030B-117

MU1 Worksurface, 11/4� thickS Straight worksurface30 Width30 DepthB No grommets117 Surface finish


Grommets/no grommets:A- worksurface includes 3�

grommet in each backcorner leading into desksupport or wire managerclips.

B- worksurface does not includegrommets






Application Notes

30�D worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces, extensions or credenzatops. They can be supported at eachend by 30� end support bracket, 30�cantilever bracket, 30� flat bracket,30�W end panel, 24�D pedestal orend panel in conjunction with desksupport, or 30�D pedestal.





Morrison

111

Wor

ksur

face

Pla

nnin

g

Worksurfaces, 1 1/4VDT corners


Corner - Corner grommet only 355/8� 175/8� 11/4� MU1-V3618-A( ) $1,109. $1,454. $2,136.355/8� 235/8� 11/4� MU1-V3624-A( ) 1,137. 1,481. 2,163.415/8� 235/8� 11/4� MU1-V4224-A( ) 1,183. 1,534. 2,272.415/8� 295/8� 11/4� MU1-V4230-A( ) 1,249. 1,614. 2,380.475/8� 235/8� 11/4� MU1-V4824-A( ) 1,401. 1,741. 2,667.475/8� 295/8� 11/4� MU1-V4830-A( ) 1,456. 1,878. 2,802.

Corner - 3 grommets 355/8� 235/8� 11/4� MU1-V3624-C( ) 1,258. 1,596. 2,278.415/8� 235/8� 11/4� MU1-V4224-C( ) 1,306. 1,647. 2,386.415/8� 295/8� 11/4� MU1-V4230-C( ) 1,362. 1,725. 2,493.475/8� 235/8� 11/4� MU1-V4824-C( ) 1,514. 1,860. 2,788.475/8� 295/8� 11/4� MU1-V4830-C( ) 1,572. 1,990. 2,922.

Order Code

Example: MU1-V4830-C-117

MU1 Worksurface, 11/4� thickV VDT corner48 Width30 Depth of returnC Three grommets117 Surface finish


Grommets/no grommets:A- VDT corner includes 3�

grommet in back corner.C- VDT corner includes 3�

grommet in all three backcorners.

Specify surface finish.11/4� VDT corners are solid coreconstruction with threaded metalinserts at desk support and allbracket locations.All worksurfacesare U.L.-listed.


Application Notes

VDT corners may be usedinterchangeably in desk and panelsystem applications. They may besupported by VDT end supportbrackets on each back edge; theymay be supported by flat bracket orbridging bracket on each side edge.


VDT corners are3/8� less thannominal depth for rear wireclearance or privacy screens.

48� x 24� VDT corners have aninside radius, T-mold front edge thatcurves into an optimal 45° straightkeyboard location.

Corner worksurfaces with equal rearedges have diagonal grain direction.

Morrison

112

Worksurfaces, 1 1/4split top VDT corners


VDT corner Corner grommet only 415/8� 235/8� 11/4� MU1-V42SS-A( ) $3,008. $3,337. $4,074.475/8� 235/8� 11/4� MU1-V48SS-A( ) 3,218. 3,548. 4,473.475/8� 295/8� 11/4� MU1-V48DS-A( ) 3,276. 3,682. 4,604.

VDT corner 3 grommets 415/8� 235/8� 11/4� MU1-V42SS-C( ) 3,122. 3,451. 4,188.475/8� 235/8� 11/4� MU1-V48SS-C( ) 3,337. 3,663. 4,586.475/8� 295/8� 11/4� MU1-V48DS-C( ) 3,393. 3,801. 4,720.

Order Code

Example: MU1-V48SS-A-117

MU1 Worksurface, 11/4� thickV VDT corner48 WidthS DepthS Split topA Grommet117 Surface finish


VDT Corner Depth:S- 24�D sidesD- 30�D sides

Grommets/no grommets:A- Grommets in back corners of

straight tops, one backcorner of VDT

C- Grommets in all three backcorners of VDT

Specify surface finish.11/4� VDT corners are solid coreconstruction with threaded metalinserts at desk support and allbracket locations. All worksurfacesare U.L.-listed.MU1- worksurfaces are supportedby brackets with machine screws.

Application Notes

Split top worksurfaces includecounterbalanced adjustablekeyboard/ mouse support withfingertip control.

Front surface adjusts from 5� belowback surface to 7� above, andadjusts in tilt from -10° to +10°.

Split top surfaces may be panelsupported or desk supported withstandard Morrison brackets.

Specify 18�D cantilever bracketswith 235/8� split corners, and 24�Dcantilever or bridging brackets with295/8� D split corners.

48�W split-top VDT corners mustbe supported by VDT-end supportkits in conjunction with cantileverbrackets at side edges.


Morrison

113

Wor

ksur

face

Pla

nnin

g

Worksurfaces, 1 1/4rounded end worksurfaces

description w d h pattern no. paint lam. V1 V2

30�D rounded end - End grommets 625/8� 30� 11/4� MU1-R6330E( ) $1,730. $2,410. $3,548.745/8� 30� 11/4� MU1-R7530E( ) 1,789. 2,490. 3,628.

30�D rounded end - No grommets 625/8� 30� 11/4� MU1-R6330B( )(L/R) 1,617. 2,294. 3,433.745/8� 30� 11/4� MU1-R7530B( )(L/R) 1,671. 2,370. 3,506.


Order Code

Example: MU1-R6330E-117

MU1 Worksurface, 11/4� thickR Rounded end63 Width30 DepthE End grommets117 Surface finish


Grommets/no grommets:E- rounded end worksurface

includes 3� grommet ineach straight end corner.

R- rounded end worksurfaceincludes 3� grommetsrecessed for use with 6�recessed desk support.

B- rounded end worksurfacedoes not include grommets

Specify surface finish.Rounded end worksurfaces withrecessed or no grommets arespecified left or right to determineposition of grommets and pedestaldrilling. Rounded end when seatedat desk defines L/R hand (Righthand shown above).




End grommeted tops have inserts toaccept desk support at straight endand no pedestal inserts.Plasticlaminate worksurfaces haveradiused T mold edge and a flatself-edge in the straight edge.

Application Notes

Rounded end worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces or extensions. They may besupported by 30� end supportbrackets, 30� cantilever bracket,30� flat bracket or 30� conferenceend panel, and by a support columnat the rounded end.

Use 18�D pedestal or end panel withdesk support under rounded endworksurfaces with recessedgrommets. Use 48�D desk supportwith 63� rounded end and 60�Wdesk support with 75� rounded end.

Worksurfaces with end grommetsmay not be supported by conferenceend panel.


Rounded end worksurfaces havethreaded metal inserts for desksupport, end panel each end, and atall bracket locations. End grommetworksurfaces have no pedestalinserts.

Morrison

114

Worksurfaces, 1 1/4conference shapes

description type w d h pattern no. paint lam. V1 V2

Half round - Standard 30� 48� 11/4� MU1-R3048-B-( ) $1,179. $1,685. $2,397.

Half round - With vertical panel 30� 503/8� 11/4� MU1-R3050-B-( ) 1,310. 1,848. 2,642.


Order Code

Example: MU1-R3050B-117

MU1 Worksurface, 11/4� thickR Rounded end30 Width50 DepthB No grommet117 Surface finish



grommets.




Plastic laminate worksurfaces haveradiused T mold edge.


Application Notes

Half-round and extended half-roundare used with back-to-back 24�Dstraight or VDT cornerworksurfaces. Half round withvertical panel attaches to 24�Dstraight or VDT corner worksurfacessupported by vertical panel.

Conference worksurfaces must besupported by support column andflat bracket or bridging bracket toadjacent worksurface.

Morrison

115

Wor

ksur

face

Pla

nnin

g

Worksurfaces, 1 1/4P-shape curvilinear


Rounded end left 24�D return 48� 72� 11/4� MU1-P72SA( )L $3,012. $3,869. $5,422.30�D return 48� 78� 11/4� MU1-P78DA( )L 3,138. 4,037. 5,653.

Rounded end right 24�D return 48� 72� 11/4� MU1-P72SA( )R 3,012. 3,869. 5,422.30�D return 48� 78� 11/4� MU1-P78DA( )R 3,138. 4,037. 5,653.

Rounded end support column 5� – 27� MM2-L26-( ) 273.

Order Code

Example: MU1-P72SA-117L

MU1 Worksurface, 11/4�P P-shape curvilinear72 Overall lengthS Depth of returnA Grommets117 Surface finishL Rounded end left


S- 24�D side edgeD- 30�D side edge


11/4� curvilinear surfaces are solidcore construction with threadedmetal inserts at desk support and allbracket locations.



All P-shape worksurfaces have 2grommets at 48� end for use with48� desk and overhead supports.

Application Notes

P-shape curvilinear worksurfacesmay be used interchangeably indesk and panel system applications.They may be supported by a 48�VDT support bracket kit, or 48�desk support and 6� end panel, inconjunction with rounded endsupport column. Use flat bracket orbridging bracket to join to adjacent11/4� worksurface.

P-shape laminate surfaces havecontinuous T-mold edge in profile tomatch adjacent 11/4� worksurfaces.

Morrison

116

Worksurfaces, 1 1/4L-shape curvilinear


24�D returns left and right 3 grommets 42� 42� 11/4� MU1-C4242SS( ) $1,378. $1,775. $2,487.48� 48� 11/4� MU1-C4848SS( ) 1,502. 1,937. 2,706.48� 60� 11/4� MU1-C4860SS( ) 1,708. 2,194. 3,076.48� 72� 11/4� MU1-C4872SS( ) 1,958. 2,525. 3,542.60� 48� 11/4� MU1-C6048SS( ) 1,708. 2,194. 3,076.72� 48� 11/4� MU1-C7248SS( ) 1,958. 2,525. 3,542.

24�D return left, 30�D right 3 grommets 48� 48� 11/4� MU1-C4848SD( ) 1,502. 1,937. 2,706.48� 60� 11/4� MU1-C4860SD( ) 1,708. 2,194. 3,076.48� 72� 11/4� MU1-C4872SD( ) 1,958. 2,525. 3,542.60� 48� 11/4� MU1-C6048SD( ) 1,708. 2,194. 3,076.72� 48� 11/4� MU1-C7248SD( ) 1,958. 2,525. 3,542.

30�D return left, 24�D right 3 grommets 48� 48� 11/4� MU1-C4848DS( ) 1,502. 1,937. 2,706.48� 60� 11/4� MU1-C4860DS( ) 1,708. 2,194. 3,076.48� 72� 11/4� MU1-C4872DS( ) 1,958. 2,525. 3,542.60� 48� 11/4� MU1-C6048DS( ) 1,708. 2,194. 3,076.72� 48� 11/4� MU1-C7248DS( ) 1,958. 2,525. 3,542.

30�D returns left and right 3 grommets 48� 48� 11/4� MU1-C4848DD( ) 1,502. 1,937. 2,706.

Order Code

Example: MU1-C4860SD-117

MU1 Worksurface, 11/4�C L-shape curvilinear48 Width left60 Width rightS Depth of left returnD Depth of right return117 Surface finish


Width dimension (W) refers to widthof left-side back edge; depthdimension (D) indicates width ofright-side back edge.S- 24�D side edgeD- 30�D side edge


11/4�curvilinear surfaces are solidcore construction with threadedmetal inserts at desk support and allbracket locations.MU1- worksurfaces are supportedby brackets with machine screws.


All L-shape curvilinearworksurfaces have three grommets.


L-shape worksurfaces have graindirection along the longer backedge.

Application Notes

L-shape curvilinear worksurfacesmay be used interchangeably indesk and panel system applications.They may be supported by cornerdesk supports or by VDT endsupport bracket kit. Use cantileverbridging brackets or flat brackets tojoin to adjacent worksurfaces.

L-shape surfaces may also besupported by MN1- end panel inconjunction with desk support, orcantilever bracket in panelplanning.

L-shape surfaces are veneer orpost-formed plastic laminate onboth back edges, matching profileT-mold on curvilinear front, andself-edge on sides.

Curvilinear worksurfaces areavailable only in 11/4� thickness.

L-shape surfaces are3/8� less thannominal depth for rear wireclearance or privacy screens.

If specifying privacy screens onboth back edges, one or both mustbe 48� back-of-VDT type.

Morrison

117

Wor

ksur

face

Pla

nnin

g

Worksurfaces, 1 1/4120° corners90° return

description w return h pattern no. lam. V1 V2

90° returnRight hand - grommet

36� 24� 11/4� MU1-Y36S-AR-( )( ) $1,037. $1,453. $1,766.42� 24� 11/4� MU1-Y42S-AR-( )( ) 1,092. 1,758. 2,323.48� 24� 11/4� MU1-Y48S-AR-( )( ) 1,216. 1,936. 2,909.60� 24� 11/4� MU1-Y60S-AR-( )( ) 1,478. n/a n/a

90° returnLeft hand - grommet

36� 24� 11/4� MU1-Y36S-AL-( )( ) 1,037. 1,453. 1,766.42� 24� 11/4� MU1-Y42S-AL-( )( ) 1,092. 1,758. 2,323.48� 24� 11/4� MU1-Y48S-AL-( )( ) 1,216. 1,936. 2,909.60� 24� 11/4� MU1-Y60S-AL-( )( ) 1,478. n/a n/a

Transitional 24� 11/4� MU1-YTS-( )( ) 823. 1,081. 1,403.

Order Code

Example: MU1-Y48S-A-R-L-117

MU1 Worksurface, 11/4� thickY 120° corner,90° returns48 WidthS 24�D returnA GrommetsR Right handL Laminate117 Surface finish


Width dimension (w) refers to widthof both back edges.


1 1/4� worksurfaces are solid coreconstruction with threaded metalinserts at desk supports and allstandard bracket locations.


Grommets/no grommets:A- worksurface includes 2

grommets in 2 backcorners, creating Left- andRight-hand applications(see illustration).

B- worksurface does not includegrommets. Worksurfaceswith no grommets are nothanded.

Application Notes

Worksurfaces are3/8� less thannominal depth for rear wireclearance or privacy screens.

120° worksurfaces with 90° returnsare used mainly in panel systemapplications. They can besuppported at each end with 24� endsupport brackets, 24� cantileverbracket, 24�W end panel, 18�D and24�D pedestal or end panel inconjunction with desk supports.

120° corner is supported by astandard ( 90° ) 24�D cantileverbracket.

Use cantilever bridging brackets tojoin to adjacent worksurface or totransitional 120° worksurface.

Transitional worksurfaces connecttwo 120° corner tops with 90°returns.

Corner worksurfaces have diagonalgrain direction.

Morrison

118

Worksurfaces, 1 1/4120° cornersMeeting corners

description w return h pattern no. paint lam.

Meeting cornerRight hand - grommet

48� 24� 11/4� MU1-M48S-AR-( )( ) $1,254.

Meeting cornerLeft hand - grommet

48� 24� 11/4� MU1-M48S-AL-( )( ) 1,254.

Support column 5� 27� MM2-L26( ) 273.

Order Code

Example: MU1-M48S-A-L-L-117

MU1 Worksurface, 11/4� thickM Meeting corner48 WidthS 24�D returnA GrommetsL Left handL Laminate117 Surface finish


Width dimension (w) refers to widthof smaller back edge. Total width ofback edge with rounded meetingarea is 621/2�.


1 1/4� worksurfaces are solid coreconstruction with threaded metalinserts at desk supports and allstandard bracket locations.


Grommets/no grommets:A- worksurface includes 2

grommets in 2 backcorners.

B- worksurface does not includegrommets.

Application Notes


120° meeting worksurfaces are usedmainly in panel system applications.Support at the rounded meeting endwith a Morrison support column,specified separately. They can besupported at the other end by 24�end support brackets, 24� cantileverbracket, 24�W end panel, 18�D and24�D pedestal or end panel inconjunction with desk supports.Morrison Network straight desksupport may be used under the 48Wback edge.

120° corner is supported by 24�Dcantilever bracket.

Use 24�D cantilever bridgingbrackets to join to adjacentworksurfaces.

Morrison

119

Wor

ksur

face

Pla

nnin

g

Morrison Options worksurfaces, 1 1/418�D


Straight, 18�D - Grommet 30� 175/8� 11/4� LU1-S3018-A-( ) $352. $589. $880.36� 175/8� 11/4� LU1-S3618-A-( ) 372. 611. 931.42� 175/8� 11/4� LU1-S4218-A-( ) 418. 685. 1,053.48� 175/8� 11/4� LU1-S4818-A-( ) 463. 723. 1,121.54� 175/8� 11/4� LU1-S5418-A-( ) 504. 798. 1,219.60� 175/8� 11/4� LU1-S6018-A-( ) 553. 870. 1,345.66� 175/8� 11/4� LU1-S6618-A-( ) 595. 960. 1,490.72� 175/8� 11/4� LU1-S7218-A-( ) 639. 1,055. 1,614.78� 175/8� 11/4� LU1-S7818-A-( ) 684. 1,109. 1,701.84� 175/8� 11/4� LU1-S8418-A-( ) 726. 1,165. 1,784.90� 175/8� 11/4� LU1-S9018-A-( ) 772. 1,243. 1,902.96� 175/8� 11/4� LU1-S9618-A-( ) 817. 1,310. 2,009.108� 175/8� 11/4� LU1-S10818-A-( ) 884. 1,403. 2,148.120� 175/8� 11/4� LU1-S12018-A-( ) 966. 1,513. 2,330.

Straight, 18�D - No grommet 30� 175/8� 11/4� LU1-S3018-B-( ) 308. 546. 832.36� 175/8� 11/4� LU1-S3618-B-( ) 332. 569. 884.42� 175/8� 11/4� LU1-S4218-B-( ) 372. 639. 1,008.48� 175/8� 11/4� LU1-S4818-B-( ) 419. 685. 1,081.54� 175/8� 11/4� LU1-S5418-B-( ) 463. 757. 1,176.60� 175/8� 11/4� LU1-S6018-B-( ) 505. 825. 1,299.66� 175/8� 11/4� LU1-S6618-B-( ) 553. 917. 1,445.72� 175/8� 11/4� LU1-S7218-B-( ) 595. 1,010. 1,570.78� 175/8� 11/4� LU1-S7818-B-( ) 640. 1,069. 1,653.84� 175/8� 11/4� LU1-S8418-B-( ) 684. 1,123. 1,741.90� 175/8� 11/4� LU1-S9018-B-( ) 730. 1,202. 1,858.96� 175/8� 11/4� LU1-S9618-B-( ) 772. 1,268. 1,971.108� 175/8� 11/4� LU1-S10818-B-( ) 840. 1,361. 2,106.120� 175/8� 11/4� LU1-S12018-B-( ) 928. 1,475. 2,286.

Order Code

Example: LU1-S4818-B-117

LU1 Worksurface, 11/4� thickS Straight worksurface48 Width18 DepthB No grommet117 Surface finish


Grommet/no grommet:A- worksurface includes one

edge grommetB- worksurface does not include

grommet


11/4� Options worksurfaces are3-ply, solid core construction withpilot holes at all pedestal, endpanel, and bracket locations.

Edge grommets are centered at rearof worksurface.

LU1- worksurfaces are supported bybrackets with wood screws.

Application Notes

18�D worksurfaces are used inpanel system applications asshallow main surfaces, extensions orcredenza tops. They may besupported at each end by an 18� endsupport bracket, 18� cantileverbracket, 18�W desk end panel or18�D pedestal.

Options worksurfaces cannot beused in conjunction with Networkdesk supports.

All straight worksurfaces are3/8� lessthan nominal depth for rear wireclearance.


Panel-supported 11/4� worksurfacesover 96� must be pedestal orMB2-C24 cantilever bracketsupported every 48�.


Morrison

120



Straight, 24�D - Grommet 24� 235/8� 11/4� LU1-S2424-A-( ) $396. $708. $1,021.30� 235/8� 11/4� LU1-S3024-A-( ) 418. 731. 1,052.36� 235/8� 11/4� LU1-S3624-A-( ) 442. 761. 1,072.42� 235/8� 11/4� LU1-S4224-A-( ) 485. 784. 1,145.48� 235/8� 11/4� LU1-S4824-A-( ) 531. 843. 1,294.54� 235/8� 11/4� LU1-S5424-A-( ) 574. 938. 1,416.60� 235/8� 11/4� LU1-S6024-A-( ) 620. 986. 1,486.66� 235/8� 11/4� LU1-S6624-A-( ) 665. 1,086. 1,636.72� 235/8� 11/4� LU1-S7224-A-( ) 708. 1,152. 1,787.78� 235/8� 11/4� LU1-S7824-A-( ) 747. 1,185. 1,862.84� 235/8� 11/4� LU1-S8424-A-( ) 797. 1,290. 1,964.90� 235/8� 11/4� LU1-S9024-A-( ) 836. 1,375. 2,089.96� 235/8� 11/4� LU1-S9624-A-( ) 884. 1,452. 2,206.108� 235/8� 11/4� LU1-S10824-A-( ) 966. 1,541. 2,363.120� 235/8� 11/4� LU1-S12024-A-( ) 1,061. 1,683. 2,557.

Straight, 24�D - No grommet 24� 235/8� 11/4� LU1-S2424-B-( ) 352. 663. 986.30� 235/8� 11/4� LU1-S3024-B-( ) 372. 690. 1,006.36� 235/8� 11/4� LU1-S3624-B-( ) 399. 715. 1,028.42� 235/8� 11/4� LU1-S4224-B-( ) 442. 739. 1,099.48� 235/8� 11/4� LU1-S4824-B-( ) 485. 799. 1,254.54� 235/8� 11/4� LU1-S5424-B-( ) 532. 898. 1,372.60� 235/8� 11/4� LU1-S6024-B-( ) 574. 941. 1,441.66� 235/8� 11/4� LU1-S6624-B-( ) 621. 1,039. 1,594.72� 235/8� 11/4� LU1-S7224-B-( ) 665. 1,108. 1,746.78� 235/8� 11/4� LU1-S7824-B-( ) 708. 1,143. 1,821.84� 235/8� 11/4� LU1-S8424-B-( ) 750. 1,247. 1,921.90� 235/8� 11/4� LU1-S9024-B-( ) 797. 1,337. 2,045.96� 235/8� 11/4� LU1-S9624-B-( ) 840. 1,406. 2,164.108� 235/8� 11/4� LU1-S10824-B-( ) 928. 1,497. 2,320.120� 235/8� 11/4� LU1-S12024-B-( ) 1,014. 1,638. 2,513.

Order Code

Example: LU1-S3024-B-117

LU1 Worksurface, 11/4� thickS Straight worksurface30 Width24 DepthB No grommet117 Surface finish


Grommet/no grommet:A- worksurface includes one


grommet





24�D worksurfaces are usedinterchangeably as shallow mainsurfaces, extensions or credenzatops.

They can be supported at each endby 24� end support bracket, 24�cantilever bracket, 24�W end panelor 18�D pedestal.

Application Notes




Panel-supported 11/4� worksurfacesover 96� must be pedestal orMB2-C24 cantilever bracketsupported every 48�.


Morrison

121

Wor

ksur

face

Pla

nnin

g



Straight, 30�D - Grommets 30� 295/8� 11/4� LU1-S3030-A-( ) $463. $741. $1,146.36� 295/8� 11/4� LU1-S3630-A-( ) 504. 797. 1,216.42� 295/8� 11/4� LU1-S4230-A-( ) 553. 870. 1,312.48� 295/8� 11/4� LU1-S4830-A-( ) 595. 937. 1,411.54� 295/8� 11/4� LU1-S5430-A-( ) 639. 1,032. 1,535.60� 295/8� 11/4� LU1-S6030-A-( ) 684. 1,105. 1,656.66� 295/8� 11/4� LU1-S6630-A-( ) 726. 1,169. 1,807.72� 295/8� 11/4� LU1-S7230-A-( ) 797. 1,264. 1,924.78� 295/8� 11/4� LU1-S7830-A-( ) 836. 1,321. 2,023.84� 295/8� 11/4� LU1-S8430-A-( ) 884. 1,393. 2,132.90� 295/8� 11/4� LU1-S9030-A-( ) 928. 1,466. 2,225.96� 295/8� 11/4� LU1-S9630-A-( ) 966. 1,541. 2,341.

Straight, 30�D - No grommets 30� 295/8� 11/4� LU1-S3030-B-( ) 419. 707. 1,101.36� 295/8� 11/4� LU1-S3630-B-( ) 463. 755. 1,173.42� 295/8� 11/4� LU1-S4230-B-( ) 505. 825. 1,270.48� 295/8� 11/4� LU1-S4830-B-( ) 553. 894. 1,368.54� 295/8� 11/4� LU1-S5430-B-( ) 595. 992. 1,492.60� 295/8� 11/4� LU1-S6030-B-( ) 640. 1,061. 1,617.66� 295/8� 11/4� LU1-S6630-B-( ) 684. 1,127. 1,763.72� 295/8� 11/4� LU1-S7230-B-( ) 750. 1,220. 1,884.78� 295/8� 11/4� LU1-S7830-B-( ) 797. 1,284. 1,982.84� 295/8� 11/4� LU1-S8430-B-( ) 840. 1,353. 2,091.90� 295/8� 11/4� LU1-S9030-B-( ) 884. 1,424. 2,186.96� 295/8� 11/4� LU1-S9630-B-( ) 928. 1,497. 2,300.

Order Code

Example: LU1-S3030B-117

LU1 Worksurface, 11/4� thickS Straight worksurface30 Width30 DepthB No grommets117 Surface finish


Grommets/no grommets:A- worksurface includes one


grommets





Application Notes

30�D worksurfaces are used inpanel system applications as mainsurfaces, extensions or credenzatops. They can be supported at eachend by 30� end support bracket, 30�cantilever bracket or 30�W endpanel.




Suspended pedestals may not beused with 11/4�worksurfaces.

Morrison

122

Morrison Options worksurfaces, 1 1/4trapezoidal


Right hand - grommet 48� 30�/24� 11/4� LU1-T48A-R-( ) $747. $1,067. $1,491.54� 30�/24� 11/4� LU1-T54A-R-( ) 951. 1,354. 1,894.60� 30�/24� 11/4� LU1-T60A-R-( ) 1,154. 1,642. 2,300.72� 30�/24� 11/4� LU1-T72A-R-( ) 1,359. 1,930. 2,698.

Left hand - grommet 48� 24�/30� 11/4� LU1-T48A-L-( ) 747. 1,067. 1,491.54� 24�/30� 11/4� LU1-T54A-L-( ) 951. 1,354. 1,894.60� 24�/30� 11/4� LU1-T60A-L-( ) 1,154. 1,642. 2,300.72� 24�/30� 11/4� LU1-T72A-L-( ) 1,359. 1,930. 2,698.

Right hand - no grommet 48� 30�/24� 11/4� LU1-T48B-R-( ) 709. 1,008. 1,406.54� 30�/24� 11/4� LU1-T54B-R-( ) 908. 1,294. 1,814.60� 30�/24� 11/4� LU1-T60B-R-( ) 1,110. 1,587. 2,212.72� 30�/24� 11/4� LU1-T72B-R-( ) 1,313. 1,868. 2,619.

Left hand - no grommet 48� 24�/30� 11/4� LU1-T48B-L-( ) 709. 1,008. 1,406.54� 24�/30� 11/4� LU1-T54B-L-( ) 908. 1,294. 1,814.60� 24�/30� 11/4� LU1-T60B-L-( ) 1,110. 1,587. 2,212.72� 24�/30� 11/4� LU1-T72B-L-( ) 1,313. 1,868. 2,619.

Order Code

Example: LU1-T48B-R-117

LU1 Worksurface, 11/4� thickT Trapezoidal48 WidthB No grommetsR Right hand117 Surface finish


Grommets/ no grommetsA- worksurface includes one


grommets


Edge grommets are centered at rearof worksurface.Right-and-Left andare defined by applying trapezoidaltops as returns from rectilinearworksurfaces.R- Right hand30� D Left, 24� D Right edgeL- Left hand24� D Left, 30� D Right edge

Application Notes

1 1/4� Options worksurfaces are 3-ply solid core construction with pilotholes at all pedestal, end panel andbracket locations.


Trapezoidal worksurfaces must besupported at each end by a pedestal,cantilever or cantilever bridgingbracket with a maximum span of 48�between supports. Panel-supportedworksurfaces over 48� must bemid-span supported by MB2-C18brackets, specified separately.

Options worksurfaces cannnot beused in conjunction with Networkdesk supports.


Morrison

123

Wor

ksur

face

Pla

nnin

g

Morrison Options worksurfaces, 1 1/4VDT corners and split-top surfaces


Corner Corner grommet only 36� 175/8� 11/4� LU1-V3618-A( ) $840. $1,169. $1,820.Corner grommet only 36� 235/8� 11/4� LU1-V3624-A( ) 861. 1,190. 1,839.Corner grommet only 42� 235/8� 11/4� LU1-V4224-A( ) 905. 1,239. 1,939.Corner grommet only 42� 295/8� 11/4� LU1-V4230-A( ) 951. 1,306. 2,032.Corner grommet only 48� 235/8� 11/4� LU1-V4824-A( ) 1,066. 1,388. 2,272.Corner grommet only 48� 295/8� 11/4� LU1-V4830-A( ) 1,105. 1,507. 2,390.

Order Code

Example: LU1-V4830-A-117

LU1 Worksurface, 11/4� thickV VDT corner48 Width30 Depth of returnA Corner grommet117 Specify finish


Grommet/no grommet:A- VDT corner includes one

edge grommet in backcorner. Straight split tophas one center back edgegrommet.


11/4� Options worksurfaces are solidcore construction with pilot holes atall bracket locations.


Application Notes

VDT corners and split top straightsurfaces are used in panel systemapplications. Options VDT cornersmay be supported by left or righthand 24� cantilever brackets at therear corner, and cantilever bridgingbracket on each side edge (see page149).

Options straight split top should besupported by 18�D cantileverbracket.

48�W split-top corners must besupported by VDT- end supportbrackets kits in conjunction withcantilever brackets at side edges.

Options worksurfaces cannot beused in conjunction with MorrisonNetwork desk supports.


VDT corners are3/8� less thannominal depth for rear wireclearance.

Split top corners havecounterbalanced adjustablekeyboard/mouse surface withfingertip control. Front surfaceadjusts from 5� below to 7� aboveback surface, and adjusts in tiltfrom -10° to +10°.


Morrison

124

Morrison Options worksurfaces, 1 1/4L-shape curvilinear


24�D returns left and right 2 grommets 48� 60� 11/4� LU1-C4860SS( ) $1,299. $1,766. $2,606.48� 72� 11/4� LU1-C4872SS( ) 1,493. 2,034. 2,997.60� 48� 11/4� LU1-C6048SS( ) 1,299. 1,766. 2,606.72� 48� 11/4� LU1-C7248SS( ) 1,493. 2,034. 2,997.

Corner grommet 42� 42� 11/4� LU1-C4242SS( ) 1,051. 1,433. 2,105.48� 48� 11/4� LU1-C4848SS( ) 1,146. 1,560. 2,294.

24�D return left, 30�D right 2 grommets 48� 60� 11/4� LU1-C4860SD( ) 1,299. 1,766. 2,606.48� 72� 11/4� LU1-C4872SD( ) 1,493. 2,034. 2,997.60� 48� 11/4� LU1-C6048SD( ) 1,299. 1,766. 2,606.72� 48� 11/4� LU1-C7248SD( ) 1,493. 2,034. 2,997.

Corner grommet 48� 48� 11/4� LU1-C4848SD( ) 1,146. 1,560. 2,294.

30�D return left, 24�D right 2 grommets 48� 60� 11/4� LU1-C4860DS( ) 1,299. 1,766. 2,606.48� 72� 11/4� LU1-C4872DS( ) 1,493. 2,034. 2,997.60� 48� 11/4� LU1-C6048DS( ) 1,299. 1,766. 2,606.72� 48� 11/4� LU1-C7248DS( ) 1,493. 2,034. 2,997.

Corner grommet 48� 48� 11/4� LU1-C4848DS( ) 1,146. 1,560. 2,294.

30�D returns left and right Corner grommet 48� 48� 11/4� LU1-C4848DD( ) 1,146. 1,560. 2,294.

Order Code

Example: LU1-C4860SD-117

LU1 Options worksurface,11/4�

C L-shape curvilinear48 Width left60 Width rightS Depth of left returnD Depth of right return117 Surface finish


Width dimension (W) refers to widthof left-side back edge; depthdimension (D) indicates width ofright-side back edge.S- 24�D side edgeD- 30�D side edge


11/4� curvilinear surfaces are solidcore construction with pilot holes atall bracket locations.LU1- worksurfaces are supported bybrackets with wood screws.


L-shape worksurfaces have graindirection along the longer backedge.

Application Notes

Options L-shaped curvilinearworksurfaces may be supported byleft- or right-hand cantileverbrackets at the rear corner andcantilever bridging bracket on eachside edge. Use mid-span supportwhenever Options worksurfacesspan more than 48�.

L-shape surfaces are veneer orpost-formed plastic laminate onboth back edges, matching profileT-mold on curvilinear front, andself-edge on sides.

Curvilinear worksurfaces areavailable only in 11/4� thickness.

L-shape surfaces are3/8� less thannominal depth for rear wireclearance or privacy screens.

Morrison

125

Wor

ksur

face

Pla

nnin

g

Morrison Options worksurfaces, 1 1/4rounded end and conference shapes


30�D rounded end No grommets 625/8� 30� 11/4� LU1-R6330B( )(L/R) $1,228. $1,872. $2,978.No grommets 745/8� 30� 11/4� LU1-R7530B( )(L/R) 1,273. 1,940. 3,025.

Half round With vertical panel 30� 503/8� 11/4� LU1-R3050-B-( ) 903. 1,378. 2,061.


Order Code

Example: LU1-R6330B-117-L

LU1 Options worksurface,11/4� thick

R Rounded end63 Width30 DepthB No grommets117 Surface finishL Left hand



grommets.


11/4� worksurfaces are 3-ply, solidcore construction.Plastic laminateworksurfaces have radiused T moldedge.Rounded end worksurfaces have aflat self-edge in the straight end.


Rounded end worksurfaces arespecified left or right to determineposition of pedestal drilling.Rounded end when seated at deskdefines L/R hand (Right handshown above). All worksurfaces areU.L.-listed.

Application Notes

Rounded end worksurfaces may besupported by 30� end supportbrackets, 30� flat bracket or 30�conference end panel, and by asupport column at the rounded end.

Suspended pedestals may not beused with 11/4� worksurfaces.Conference worksurfaces must besupported by support column andflat bracket or bridging bracket toadjacent desk.

Half round with vertical panelattaches to 24�D straight or VDTcorner worksurfaces supported byvertical panel.

Morrison

126

Morrison Options worksurfaces, 1 1/4Wave-end surfaces

description w d h pattern no. lam

Left wave-end - Grommet 36� 295/8� 11/4� LU1-W36AL( ) $1,081.42� 295/8� 11/4� LU1-W42AL( ) 1,146.48� 295/8� 11/4� LU1-W48AL( ) 1,214.

Left wave-end - No grommet 36� 295/8� 11/4� LU1-W36BL( ) 1,061.42� 295/8� 11/4� LU1-W42BL( ) 1,124.48� 295/8� 11/4� LU1-W48BL( ) 1,194.

Right wave-end - Grommet 36� 295/8� 11/4� LU1-W36AR( ) 1,081.42� 295/8� 11/4� LU1-W42AR( ) 1,146.48� 295/8� 11/4� LU1-W48AR( ) 1,214.

Right wave-end - No grommet 36� 295/8� 11/4� LU1-W36BR( ) 1,061.42� 295/8� 11/4� LU1-W42BR( ) 1,124.48� 295/8� 11/4� LU1-W48BR( ) 1,194.

Order Code

Example: LU1-W48AL-117

LU1 Options worksurface,11/4�

W Wave-end curvilinear48 WidthA With grommetsL Left117 Surface finish


11/4� curvilinear surfaces are solidcore construction with pilot holes atbracket and pedestal locations.


Grommets/no grommets:A- Worksurface includes one

edge grommetB- Worksurface does not

include grommets



Application Notes

Options wave-end curvilinearworksurfaces are for panel planningonly and cannot be used inconjunction with Network desksupports.

Use cantilever bridging bracket tojoin to adjacent 11/4� worksurface.

Wave-end surfaces are post-formedon back edge, matching profileT-mold on curvilinear front, andself-edge on sides.

Wave-end surfaces are availableonly in plastic laminate, 11/4�thickness.

Wave-end surfaces are nominal30�D at left or right, and align with24�D surface at the other end.

Morrison

127

Wor

ksur

face

Pla

nnin

g

Morrison Options worksurfaces, 1 1/4120° corners90° returns and Diamond

description type w return h pattern no. lam. V1 V2

90° return no grommet 36� 24� 11/4� LU1-Y36S-B( )( ) $973. $1,372. $1,664.42� 24� 11/4� LU1-Y42S-B( )( ) 1,028. 1,664. 2,193.48� 24� 11/4� LU1-Y48S-B( )( ) 1,139. 1,825. 2,748.60� 24� 11/4� LU1-Y60S-B( )( ) 1,390. n/a n/a

Diamond no grommet 36� 24� 11/4� LU1-D36S-B( )( ) 961. 1,387. 1,712.42� 24� 11/4� LU1-D42S-B( )( ) 1,068. 1,695. 2,285.48� 24� 11/4� LU1-D48S-B( )( ) 1,169. 1,897. 2,878.

Transitional 24� 11/4� LU1-YTS-( )( ) 747. 981. 1,274.

Order Code

Example: LU1-Y48S-B-L-L-117


Y 120° corner,90° returns48 WidthS 24�D returnB No GrommetsL Left handL Laminate117 Surface finish


Width dimensions (w) refers towidth of both back edges.


1 1/4� Options worksurfaces are solidcore construction with pilot holes atstandard support locations.

120° Options worksurfaces areavailable without grommets only.


Application Notes

Worksurfaces are3/8� less thannominal depth for rear wireclearance.

120° Morrison Optionsworksurfaces with 90° returns areused in panel system applicationsonly. They can be supported at eachend by 24� end support brackets,24� cantilever bracket or 18�D and24�D pedestals. 120° corner issupported by a standard ( 90° )24�D cantilever bracket.

Use cantilever bridging brackets tojoin to adjacent worksurfaces or totransitional 120° worksurfaces. Usemid-span support whenever Optionsworksurfaces span more then 48�.

Transitional worksurfaces connecttwo 120° corner tops with 90°returns.

120° Morrison Optionsworksurfaces with 120° returns areused in panel system applicationsonly. They can be supported at eachreturn end by 24� end supportbrackets, 24� cantilever bracket or18�D and 24�D pedestals. 120°corner is supported by standard (90° ) 24�D cantilever bracket.

Order brackets with wood screws forMorrison Options worksurfaces.

Corner worksurfaces have diagonalgrain direction.

Morrison

128

Morrison Options worksurfaces, 1 1/4120° cornersMeeting corner

description w return h pattern no. paint lam. V1 V2

Meeting cornerRight hand - no grommet

48� 24� 11/4� LU1-M48S-BRL( ) $1,174. n/a n/a

Meeting cornerLeft hand - no grommet

48� 24� 11/4� LU1-M48S-BLL( ) 1,174. n/a n/a

Support column 5� 27� MM2-L26( ) 273.

Order Code

Example: LU1-M48S-B-L-L-117


M Meeting corner48 WidthS 24�D returnB No GrommetsL Left handL Laminate117 Surface finish


Width dimension (w) refers to widthof smaller back edge. Total width ofback edge with rounded meetingarea is 621/2�.


1 1/4� worksurfaces are solid coreconstruction with pilot holes at allsupport locations.

120° Options worksurfaces areavailable without grommets only.


Application Notes


Morrison Options 120° meetingworksurfaces are used in panelsystem application only. They aresupported at the rounded meetingend by a Morrison support column,specified separately. They can besupported at the other end by 24�end support brackets, 24� cantileverbracket or 18�D and 24�Dpedestals.

120° corner is supported by 24�Dcantilever bracket.

Use 24�D cantilever bridgingbrackets to join to adjacentworksurfaces.

Morrison

129

Wor

ksur

face

Pla

nnin

g

Currents worksurfaces for Morrisonstraight, flat front3/8� wire drop and grommet

description w d h pattern no. lam.

24�D straight worksurface, flat front 24� 235/8� 1� AWM2 F2424 ( )( ) $342.30� 235/8� 1� AWM2 F3024 ( )( ) 376.36� 235/8� 1� AWM2 F3624 ( )( ) 411.42� 235/8� 1� AWM2 F4224 ( )( ) 446.48� 235/8� 1� AWM2 F4824 ( )( ) 477.54� 235/8� 1� AWM2 F5424 ( )( ) 513.60� 235/8� 1� AWM2 F6024 ( )( ) 548.66� 235/8� 1� AWM2 F6624 ( )( ) 582.72� 235/8� 1� AWM2 F7224 ( )( ) 617.78� 235/8� 1� AWM2 F7824 ( )( ) 648.84� 235/8� 1� AWM2 F8424 ( )( ) 684.90� 235/8� 1� AWM2 F9024 ( )( ) 717.96� 235/8� 1� AWM2 F9624 ( )( ) 754.

30�D straight worksurface, flat front 30� 295/8� 1� AWM2 F3030 ( )( ) 426.36� 295/8� 1� AWM2 F3630 ( )( ) 463.42� 295/8� 1� AWM2 F4230 ( )( ) 499.48� 295/8� 1� AWM2 F4830 ( )( ) 527.54� 295/8� 1� AWM2 F5430 ( )( ) 570.60� 295/8� 1� AWM2 F6030 ( )( ) 617.66� 295/8� 1� AWM2 F6630 ( )( ) 669.72� 295/8� 1� AWM2 F7230 ( )( ) 718.78� 295/8� 1� AWM2 F7830 ( )( ) 769.84� 295/8� 1� AWM2 F8430 ( )( ) 823.90� 295/8� 1� AWM2 F9030 ( )( ) 872.96� 295/8� 1� AWM2 F9630 ( )( ) 922.

Order Code

Example: AWM2 F4830-119-119

AWM2 WorksurfaceF Flat48 Width30 Depth119 Top finish119 Trim finish


Specify top finish first, followed bytrim finish.

Please refer to the Currents pricelist for finishes.

Veneer finishes for Currentsworksurfaces for Morrison areavailable through Custom ProductDevelopment.

Application Notes

Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrison panelplanning brackets or end-supportedfrom Currents wall. 24�D straighttops may also be cantilevered fromCurrents service wall. Underside ofworksurfaces is drilled to accept allMorrison panel-planning brackets,Morrison and Currents pedestals,and worksurface stiffeners. 24�Dstraight tops are also drilled toaccept Currents wall cantileverbrackets. AWM2- worksurfaces aresupported by brackets with woodscrews.When using Morrison end supportbrackets, order MB3-EC18, 24 or30.Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately (page 135).

Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.

Flat front allows two straightworksurfaces to meet at right angles.

Actual worksurface depth is3/8� lessthan nominal 24� and 30� for cableclearance.

All worksurfaces include one edgegrommet, centered at rear ofworksurface, with maximumclearance of 15/8�.

Currents for Morrison worksurfacesfeature crisp, 90-degree cornerseliminating the corner kick detailtypical of Currents universalworksurfaces. This facilitates theuse of brackets, pedestals and endpanels at the side edge ofworksurfaces.

Morrison

130

Currents worksurfaces for Morrisoncorner3/8� wire drop and grommet

description type w d h pattern no. lam.

Corner worksurfaces 24�D both sides 42� 42� 1� AWM2 C4242 S ( )( ) $763.48� 48� 1� AWM2 C4848 S ( )( ) 847.60� 60� 1� AWM2 C6060 S ( )( ) 1,185.

30�D both sides 42� 42� 1� AWM2 C4242 D ( )( ) 763.48� 48� 1� AWM2 C4848 D ( )( ) 847.60� 60� 1� AWM2 C6060 D ( )( ) 1,185.

30�D left/24�D right 42� 42� 1� AWM2 C4242 L ( )( ) 763.48� 48� 1� AWM2 C4848 L ( )( ) 847.60� 60� 1� AWM2 C6060 L ( )( ) 1,185.

24�D left/30�D right 42� 42� 1� AWM2 C4242 R ( )( ) 763.48� 48� 1� AWM2 C4848 R ( )( ) 847.60� 60� 1� AWM2 C6060 R ( )( ) 1,185.

Order Code

Example: AWM2 C4848S-119-119

AWM2 WorksurfaceC Corner48 Width left48 Width rightS Depth left and right119 Top finish119 Trim finish


Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.

Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D right




Wood grain laminate is not availableon 60�W x 60�D cornerworksurfaces.

Application Notes

Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents wall. Underside ofworksurfaces is drilled to accept allMorrison panel-planning brackets,Morrison and Currents pedestals,and worksurface stiffeners. 24�Dworksurfaces are also drilled toaccept Currents wall cantileverbrackets.

AWM2- worksurfaces are supportedby brackets with wood screws.

When using Morrison end supportbrackets, order MB3-EC18, 24 or30.

Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately (page 135).


Actual worksurface depth is3/8� lessthan nominal 24� and 30� for cableclearance.

All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 15/8�.

Morrison

131

Wor

ksur

face

Pla

nnin

g

Currents worksurfaces for Morrisonextended corner3/8� wire drop and grommetextended left


24�D both sides - Corner worksurfaces, extendedleft

60� 36� 1� AWM2 C6036 S ( )( ) $847.60� 42� 1� AWM2 C6042 S ( )( ) 934.60� 48� 1� AWM2 C6048 S ( )( ) 1,017.72� 36� 1� AWM2 C7236 S ( )( ) 1,017.72� 42� 1� AWM2 C7242 S ( )( ) 1,098.72� 48� 1� AWM2 C7248 S ( )( ) 1,185.84� 48� 1� AWM2 C8448 S ( )( ) 1,355.

30�D both sides - Corner worksurfaces, extendedleft

60� 48� 1� AWM2 C6048 D ( )( ) 1,101.72� 48� 1� AWM2 C7248 D ( )( ) 1,270.84� 48� 1� AWM2 C8448 D ( )( ) 1,439.

24�D left/30�D right - Corner worksurfaces,extended left

60� 42� 1� AWM2 C6042 R ( )( ) 1,017.60� 48� 1� AWM2 C6048 R ( )( ) 1,101.72� 42� 1� AWM2 C7242 R ( )( ) 1,185.72� 48� 1� AWM2 C7248 R ( )( ) 1,270.84� 48� 1� AWM2 C8448 R ( )( ) 1,439.

30�D left/24�D right - Corner worksurfaces,extended left

60� 42� 1� AWM2 C6042 L ( )( ) 1,017.60� 48� 1� AWM2 C6048 L ( )( ) 1,101.72� 42� 1� AWM2 C7242 L ( )( ) 1,185.72� 48� 1� AWM2 C7248 L ( )( ) 1,270.84� 48� 1� AWM2 C8448 L ( )( ) 1,439.

Order Code

Example: AWM2 C6036S119-119








Application Notes

Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents wall. Extended sidemay also be supported with CurrentsC-legs. Underside of worksurface isdrilled to accept all Morrisonpanel-planning brackets, Morrisonand Currents pedestals, worksurfacestiffeners and Currents C-leg on theextended side.





Actual worksurface is3/8� less thannominal 24� and 30� for cableclearance.

All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 1 5/8.�

Morrison

132

Currents worksurfaces for Morrisonextended corner3/8� wire drop and grommetextended right


24�D both sides - Corner worksurfaces extendedright

36� 60� 1� AWM2 C3660 S ( )( ) $847.36� 72� 1� AWM2 C3672 S ( )( ) 1,017.42� 60� 1� AWM2 C4260 S ( )( ) 934.42� 72� 1� AWM2 C4272 S ( )( ) 1,098.48� 60� 1� AWM2 C4860 S ( )( ) 1,017.48� 72� 1� AWM2 C4872 S ( )( ) 1,185.48� 84� 1� AWM2 C4884 S ( )( ) 1,355.

30�D both sides - Corner worksurfaces extendedright

48� 60� 1� AWM2 C4860 D ( )( ) 1,101.48� 72� 1� AWM2 C4872 D ( )( ) 1,270.48� 84� 1� AWM2 C4884 D ( )( ) 1,439.

24�D left/30�D right - Corner worksurfacesextended right

42� 60� 1� AWM2 C4260 R ( )( ) 1,017.42� 72� 1� AWM2 C4272 R ( )( ) 1,185.48� 60� 1� AWM2 C4860 R ( )( ) 1,101.48� 72� 1� AWM2 C4872 R ( )( ) 1,270.48� 84� 1� AWM2 C4884 R ( )( ) 1,439.

30�D left/24�D right - Corner worksurfacesextended right

42� 60� 1� AWM2 C4260 L ( )( ) 1,017.42� 72� 1� AWM2 C4272 L ( )( ) 1,185.48� 60� 1� AWM2 C4860 L ( )( ) 1,101.48� 72� 1� AWM2 C4872 L ( )( ) 1,270.48� 84� 1� AWM2 C4884 L ( )( ) 1,439.

Order Code

Example: AWM2 C3660S-119-119








Application Notes

Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents wall. Extended sidemay also be supported with CurrentsC-legs. Underside of worksurface isdrilled to accept all Morrisonpanel-planning brackets, Morrisonand Currents pedestals, worksurfacestiffeners and Currents C-leg on theextended side.





Actual worksurface is3/8� less thannominal 24� and 30� for cableclearance.

All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 1 5/8.�

Morrison

133

Wor

ksur

face

Pla

nnin

g

Currents worksurfaces for MorrisonP-shape3/8� wire drop and grommet


P-shape surfaces, extended left 75� 48� 1� AWM2 P7548 S ( )( ) $1,355.87� 48� 1� AWM2 P8748 S ( )( ) 1,525.

P-shape surfaces, extended right 48� 78� 1� AWM2 P4875 S ( )( ) 1,355.48� 87� 1� AWM2 P4887 S ( )( ) 1,525.

Order Code

Example: AWM2 P7548 S-119-119

AWM2 WorksurfaceP P-shape75 Width left48 Width rightS Depth of return119 Top finish119 Trim finish





Application Notes

Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets.

P-shaped worksurfaces may besupported with Morrison brackets orcantilevered from Currents servicewall along 48� edge, and supportedby a 24�D Currents C-leg atconference end. Specify supportsseparately.


All P-shaped worksurfacescorrespond to a 24�D adjacentstraight or corner worksurface.




Actual worksurface depth is3/8� lessthan nominal for cable clearance.

All worksurfaces include one edgegrommet, centered at rear ofworksurface, with maximumclearance of 15/8�.

For 90� application span, use twoAWB-S42 stiffeners.

For 96� application span, use twoAWB-S48 stiffeners.

Morrison

134

Currents worksurfaces for Morrisonstiffeners

description type w d h pattern no. list

Stiffener for straight and corner worksurfaces 36� 20� 11/2� 2� AWM1 S36 $72.42� 26� 11/2� 2� AWM1 S42 77.48� 32� 11/2� 2� AWM1 S48 79.60� 44� 11/2� 2� AWM1 S60 81.66� 50� 11/2� 2� AWM1 S66 85.72� 56� 11/2� 2� AWM1 S72 89.78� 62� 11/2� 2� AWM1 S78 93.84� 68� 11/2� 2� AWM1 S84 95.

Order Code

Example: AWM1 S48

AWM1 WorksurfaceS Stiffener48 Type

Application Notes

Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.



For 90� application span, use twoAWM1-S42 stiffeners.

For 96� application span, use twoAWM1-S48 stiffeners.

Stiffener mounts 18� from front edgeof worksurface and will interferewith mobile or floorstandingpedestals greater than 18� deep.

To accommodate a floorstandingpedestal greater than 18� deep atone end of worksurface, specifystiffener for 12� narrowerworksurface. To accommodate twofloorstanding pedestals ordouble-wide at one end ofworksurface, specify stiffener for24� narrower worksurface.

Morrison

135

Wor

ksur

face

Pla

nnin

g

Cascade edge worksurfacesRectangular

description w d h pattern no. Solid woodgrain

24�D Rectangular 24� 24� 11/8� MCE1R2424N $254. $290.30� 24� 11/8� MCE1R3024N 290. 334.36� 24� 11/8� MCE1R3624N 319. 368.42� 24� 11/8� MCE1R4224N 368. 424.48� 24� 11/8� MCE1R4824N 414. 476.54� 24� 11/8� MCE1R5424N 444. 511.60� 24� 11/8� MCE1R6024N 483. 555.66� 24� 11/8� MCE1R6624N 521. 597.72� 24� 11/8� MCE1R7224N 545. 626.78� 24� 11/8� MCE1R7824N 586. 673.84� 24� 11/8� MCE1R8424N 619. 710.90� 24� 11/8� MCE1R9024N 698. 801.96� 24� 11/8� MCE1R9624N 762. 875.

30�D Rectangular 24� 30� 11/8� MCE1R2430N 320. 370.30� 30� 11/8� MCE1R3030N 360. 414.36� 30� 11/8� MCE1R3630N 401. 462.42� 30� 11/8� MCE1R4230N 436. 499.48� 30� 11/8� MCE1R4830N 483. 555.54� 30� 11/8� MCE1R5430N 546. 628.60� 30� 11/8� MCE1R6030N 601. 690.66� 30� 11/8� MCE1R6630N 670. 770.72� 30� 11/8� MCE1R7230N 698. 801.78� 30� 11/8� MCE1R7830N 744. 855.84� 30� 11/8� MCE1R8430N 790. 910.90� 30� 11/8� MCE1R9030N 851. 978.96� 30� 11/8� MCE1R9630N 910. 1,045.

Order Code

Example: MCE1R4824N, 118

MCE1 Cascasde edgeworksurface

R Rectangular48 Width24 DepthN No grommets118 Surface finish


Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $20.

Finish:

Solid:

114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice

Woodgrain:

124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut

Application Notes

Cascade Edge worksurfaces arewrapped with a pvc free, 3Dlaminate sheet heated and pressedaround an FSC certified substrate.3D laminate is more susceptible todenting, impact, tearing andmarring than conventional highpressure laminate and should behandled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty that covers defects inworkmanship and materials. Thiswarranty does not cover damageoccurring during or afterinstallation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.

Cascade Edge are not drilled forwire management clips, pedestals orbrackets. Cascade Edgeworksurfaces are for panel-basedplanning only and cannot be used inconjunction with Network desksupports.

Worksurfaces are1/16� less thennominal width and3/8� less thannominal depth for rear wireclearance.

Edge grommets are centered at rearedge of worksurface for maximunclearance of 13/8�

Worksurfaces require support every48� in width. All supportinghardware is ordered separately.Worksurfaces may be supported ateach end by pedestals or endsupport ‘‘EC’’ brackets andcantilever brackets matching theworksurface depth.

Panel supported worksurfaces over48� must be mid-span supported bycantilever brackets, specifiedseparately. Order Morrison bracketswith wood screws ( suffix-W).

Morrison

136

Cascade edge worksurfacesCurvilinear Corner

description A B C h pattern no solid woodgrain

Curvilinear corner 36� 24� 24� 11/8� MCE1L3636SSN $630. $726.42� 24� 24� 11/8� MCE1L4242SSN 762. 875.42� 24� 30� 11/8� MCE1L4242SDN 905. 1,038.42� 30� 24� 11/8� MCE1L4242DSN 905. 1,038.48� 24� 24� 11/8� MCE1L4848SSN 855. 984.48� 24� 30� 11/8� MCE1L4848SDN 1,025. 1,178.48� 30� 24� 11/8� MCE1L4848DSN 1,025. 1,178.48� 30� 30� 11/8� MCE1L4848DDN 918. 1,057.

Order Code

Example: MCE1L4848SSG-114

MCE1 Cascade edgeworksurface

L Curvilinear ‘‘L’’ top48 Width48 DepthS 24�d, left sideS 24�d, right sideG Grommet114 Surface finishL Grain direction


Specify:Grommet / no grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $40.Finish:

Solid:


Woodgrain:


Note: When wood grain or brushedfinishes are specified on Cascadecorner worksurfaces with two ‘‘A’’sides of equal length that do notexceed 42� you must select one ofthree grain direction options. Insertthe desired grain direction ‘‘L’’ =Left hand, ‘‘R’’ = Right hand or ‘‘D’’= Diagonal after the worksurfacefinish code to indicate theappropriate grain direction. Whenthe ‘‘D’’ option is selected pleaseadd $25.00 to the worksurface listprice. 48� Cascade corners are notavailable with a diagonal grainoption.

Application Notes


Cascade Edge worksurfaces and arenot drilled for wire managementclips, pedestals or brackets.Cascade Edge worksurfaces are forpanel-based planning only andcannot be used in conjunction withNetwork desk supports.

Worksurfaces are1/16� less thannominal width and3/8� less thannominal depth for rear wireclearance.


Worksurfaces require support every48� in width. All supportinghardware is ordered separately.Worksurfaces may be supported byleft or right hand 18� cantileverbrackets at the rear corner, andcantilever bridging brackets on eachside edge.

Panel supported worksurfaces over48� must be mid-span supported bycantilever brackets, specifiedseparately. Order Morrison bracketswith wood screws (suffix -W ).

Morrison

137

Wor

ksur

face

Pla

nnin

g

Cascade edge worksurfacesBlended ‘‘L’’

description B C A D h pattern no. solid woodgrain

Blended ‘‘L’’ 42� 60� 24� 24� 11/8� MCE1L4260SSN $1,045. $1,202.42� 66� 24� 24� 11/8� MCE1L4266SSN 1,072. 1,236.42� 72� 24� 24� 11/8� MCE1L4272SSN 1,113. 1,281.42� 78� 24� 24� 11/8� MCE1L4278SSN 1,126. 1,293.48� 60� 24� 24� 11/8� MCE1L4860SSN 1,059. 1,216.48� 60� 24� 30� 11/8� MCE1L4860SDN 1,038. 1,196.48� 60� 30� 24� 11/8� MCE1L4860DSN 1,038. 1,196.48� 66� 24� 24� 11/8� MCE1L4866SSN 1,097. 1,260.48� 66� 24� 30� 11/8� MCE1L4866SDN 1,093. 1,257.48� 66� 30� 24� 11/8� MCE1L4866DSN 1,093. 1,257.48� 72� 24� 24� 11/8� MCE1L4872SSN 1,137. 1,307.48� 72� 24� 30� 11/8� MCE1L4872SDN 1,143. 1,317.48� 72� 30� 24� 11/8� MCE1L4872DSN 1,143. 1,317.48� 78� 24� 24� 11/8� MCE1L4878SSN 1,253. 1,441.48� 84� 24� 24� 11/8� MCE1L4884SSN 1,409. 1,621.60� 42� 24� 24� 11/8� MCE1L6042SSN 1,045. 1,202.60� 48� 24� 24� 11/8� MCE1L6048SSN 1,059. 1,216.60� 48� 24� 30� 11/8� MCE1L6048SDN 1,038. 1,196.60� 48� 30� 24� 11/8� MCE1L6048DSN 1,038. 1,196.66� 42� 24� 24� 11/8� MCE1L6642SSN 1,072. 1,236.66� 48� 24� 24� 11/8� MCE1L6648SSN 1,097. 1,260.66� 48� 24� 30� 11/8� MCE1L6648SDN 1,093. 1,257.66� 48� 30� 24� 11/8� MCE1L6648DSN 1,093. 1,257.72� 42� 24� 24� 11/8� MCE1L7242SSN 1,113. 1,281.72� 48� 24� 24� 11/8� MCE1L7248SSN 1,137. 1,307.72� 48� 24� 30� 11/8� MCE1L7248SDN 1,143. 1,317.72� 48� 30� 24� 11/8� MCE1L7248DSN 1,143. 1,317.

Order Code

Example: MCE1L4872SDG-114


L Blended ‘‘L’’ top48 Depth72 WidthS 24�d return leftD 30�d return rightG Grommet114 Surface finish


Specify:Grommet / no grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $40.

Finish:

Solid:


Woodgrain:


Application Notes







Morrison

138

Cascade edge worksurfacesBlended ‘‘L’’

description B C A D h pattern no. solid woodgrain

Blended ‘‘L’’ 78� 42� 24� 24� 11/8� MCE1L7842SSN $1,126. $1,293.78� 48� 24� 24� 11/8� MCE1L7848SSN 1,253. 1,441.84� 48� 24� 24� 11/8� MCE1L8448SSN 1,409. 1,621.

Order Code

Example: MCE1L4872SDG-114


L Blended ‘‘L’’ top48 Depth72 WidthS 24�d return leftD 30�d return rightG Grommet114 Surface finish



Finish:

Solid:


Woodgrain:


Application Notes







Morrison

139

Wor

ksur

face

Pla

nnin

g

Cascade edge worksurfacesHalf round and Corner round

description w d h pattern no. solid woodgrain

Half Round 501/4� notched for panel 18� 11/8� MCE1H4818P $545. $626.601/4� notched for panel 24� 11/8� MCE1H6024P 749. 863.48� 18� 11/8� MCE1H4818 545. 626.60� 24� 11/8� MCE1H6024 749. 863.

24�D- RH Corner Round 24� 24� 11/8� MCE1CR24R 290. 334.

24�D- LH Corner Round 24� 24� 11/8� MCE1CR24L 290. 334.

24�D - Notched Corner Round 24� notched 24� 11/8� MCE1CR24N 290. 334.

Sample 12� 12� 11/8� MCE1R1212G 156. 181.

Order Code

Example: MCE1H4818P-117


H Half round48 Width18 DepthP Notched for panel117 Surface finish


Specify:

Finish:

Solid:


Woodgrain:


Application Notes


Cascade Edge worksurfaces are arenot drilled for wire managementclips, pedestals or brackets.Cascade Edge worksurfaces are forpanel-based planning only andcannot be used in conjunction withNetwork desk supports.

Worksurfaces are1/16� less thannominal width and3/8� less thannominal depth for rear wireclearance. Worksurfaces requiresupport every 48� in width. Allsupporting hardware is orderedseparately.

Half Round:Half round worksurfaces may besupported by cantilever bridgingbrackets in conjunction with arounded end support column.

Corner Round:Notched corner round worksurfacesare supported by cantilever bridgingbrackets on both side edges.

End run Left- and Right-handedcorner round worksurfaces aresupported by a combination of anend bracket along the panel edgeand a cantilever bridging bracket tothe adjacent worksurface side edge.

Order Morrison brackets with woodscrews ( suffix -W ).

Morrison

140

Cascade edge worksurfacesWave End

description 1 2 3 A B h pattern no. solid woodgrain

Wave End, RH 36� 30� 24� 3� 15� 11/8� MCE1W362430N $678. $779.42� 30� 24� 9� 15� 11/8� MCE1W422430N 711. 820.48� 30� 24� 15� 15� 11/8� MCE1W482430N 763. 877.72� 30� 24� 301/2� 231/2� 11/8� MCE1W722430N 970. 1,115.

Wave End, LH 36� 24� 30� 15� 3� 11/8� MCE1W363024N 678. 779.42� 24� 30� 15� 9� 11/8� MCE1W423024N 711. 820.48� 24� 30� 15� 15� 11/8� MCE1W483024N 763. 877.78� 24� 30� 231/2� 301/2� 11/8� MCE1W723024N 970. 1,115.

Order Code

Example: MCE1W483024N-118


W Wave end48 Width30 Depth left24 Depth rightN No Grommet118 Surface finish



Finish:

Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice

Woodgrain:


Application Notes


Cascade Edge worksurfaces are notdrilled for wire management clips,pedestals or brackets.

Cascade Edge worksurfaces are forpanel-based planning only andcannot be used in conjunction withNetwork desk supports.


Edge grommets are centered at rearedge of worksurface for maximunclearance of 13/8�.

Worksurfaces require support every48� in width. All supportinghardware is ordered separately.Worksurfaces may be supported ateach end by pedestals or endsupport ‘‘EC’’ brackets andcantilever brackets matching theworksurface depth. Use cantileverbridging bracket to join to adjacentworksurface.

Panel supported worksurfaces over48� must be mid-span supported bycantilever brackets, specifiedseparately. Order Morrison bracketswith wood screws ( suffix -W ).

Morrison

141

Wor

ksur

face

Pla

nnin

g

Universal and conference desk end panelsMorrison desks and panel-based planning


Universal Desk height 17� 11/4� 26� MK4-U2618-P/V-( ) $529. $654. $931.23� 11/4� 26� MK4-U2624-P/V-( ) 556. 767. 1,108.29� 11/4� 26� MK4-U2630-P/V-( ) 591. 888. 1,259.35� 11/4� 26� MK4-U2636-P/V-( ) 653. 1,006. 1,435.

Conference Desk Height (Right hand shown) 17� 11/4� 26� MK4-C2618-P/V-( )-(L/R) 653. 767. 1,108.23� 11/4� 26� MK4-C2624-P/V-( )-(L/R) 676. 888. 1,284.29� 11/4� 26� MK4-C2630-P/V-( )-(L/R) 707. 1,006. 1,435.35� 11/4� 26� MK4-C2636-P/V-( )-(L/R) 740. 1,125. 1,614.

Order Code

Example: MK4-U2624-P-612

MK4 Desk panelU Desk panel type26 Height24 WidthP Surface type612 Finish


Surface type:P- PaintedV- Veneer

Specify L/R left or right handapplication for conference endpanels.Desk height end panelssupport worksurface at 281/4� or283/4�. 7�W end panels are used tosupport 18�D worksurfaces.

23�W end panels are used tosupport 24�D or 30�D worksurfaceswith recessed grommets.

29�W end panels are used tosupport 30�D or 36�D worksurfaces.

35�W end panels are used tosupport 36�D worksurfaces.

Application Notes

Universal end panels may be usedas end support for a worksurface, inconjunction with vertical panels(specify MB1-N separately) orkneehole filler panels.

Universal panels are predrilled toaccept brackets or filler panelseither direction.

A universal end panel includesbracket MB1-T desk endpanel/worksurface.

Conference end panels are used fortable desks and similar applicationswhere neither pedestals nor fillerpanels are used.

Conference end panels cannot bemounted under rounded endsurfaces with end grommets.

A conference end panel includesbrackets MB1-T, desk endpanel/worksurface and MB1-D,conference endpanel/worksurface.

Universal and conference endpanels are not used in conjunctionwith desk supports (see page 153).

Morrison

142

VDT corner and transitional end panelsMorrison desks and panel-based planning


VDT corner panels (shipped in pairs) Desk height 34� 11/4� 26� MK4-V2636-P/V-( ) $1,568. $2,073. $2,898.40� 11/4� 26� MK4-V2642-P/V-( ) 1,724. 2,216. 3,140.

VDT transitional end panel Desk height 35� 11/8� 26� MK4-X2636-P/V-( )-(L /R) 766. 1,068. 1,498.41� 11/8� 26� MK4-X2642-P/V-( )-(L/R) 829. 1,125. 1,554.

Order Code

Example: MK4-V2636-P-612

MK4 Desk panelV Desk panel type26 Height36 WidthP Surface type612 Finish



Application Notes

VDT corner endpanel widths:

Correspondingworksurfacewidths:

34� 36�40� 42�35� 36�41� 42�

VDT corner panels are wood deskpanels ordered and shipped inpairs: one left and one right.

34�W VDT corner end panelssupport both sides of 36� VDTcorner worksurfaces.

40�W VDT corner end panelssupport both sides of 42� VDTcorner worksurfaces.

VDT corner end panels include 2MB1-T brackets, VDT corner endpanels/worksurface and bracketMB1-L1, filler/desk end panel.

VDT transitional end panels areused when one back edge of a VDTsurface is supported by a verticalpanel.

A VDT transitional end panelincludes bracket MB1-T, desk endpanel/ worksurface. Specifybracket MB1-W 18 or 20(L or R)separately.

Morrison

143

Wor

ksur

face

Pla

nnin

g

Kneehole filler and transitional filler panelsMorrison desks


Kneehole filler Desk height 57� 11/8� 26� MK4-K6026-P/V-( ) $740. $1,092. $1,554.63� 11/8� 26� MK4-K6626-P/V-( ) 829. 1,183. 1,673.69� 11/8� 26� MK4-K7226-P/V-( ) 925. 1,274. 1,794.75� 11/8� 26� MK4-K7826-P/V-( ) 1,043. 1,360. 1,941.

Transitional filler Desk height 581/2� 11/8� 26� MK4-T6026-P/V-( ) 740. 1,092. 1,554.641/2� 11/8� 26� MK4-T6626-P/V-( ) 829. 1,183. 1,673.701/2� 11/8� 26� MK4-T7226-P/V-( ) 925. 1,274. 1,794.761/2� 11/8� 26� MK4-T7826-P/V-( ) 1,043. 1,360. 1,941.

Order Code

Example: MK4-T6026-P-612

MK4 Desk panelT Desk panel type60 Width26 HeightP Surface type612 Finish



Application Notes

Kneeholefillerpanelwidths:

57�57�63�69�69�75�

Corres-pondingstraightworksurfacewidths:60�60�66�72�72�78�

Corres-pondingroundedworksurfacewidths:745/8�775/8�–865/8�895/8�–

Kneehole filler panels span usebetween two universal desk endpanels to construct a freestandingwood desk.

A kneehole panel includes 2brackets MB1-L1, filler panel/deskend panel.

All 69�W and 75�W kneehole fillerpanels are shipped with a centerstabilizing bracket, MB1-AUX-D.

Transitional filler panels are usedbetween a universal desk end paneland a vertical panel.

A transitional filler panel includesbracket MB1-L1, filler panel/deskend panel. Specify bracket MB1-W18 or 20(L or R) separately.

A transitional filler panel over 70�Wis shipped with a center stabilizingbracket, MB1-AUX-D.

Morrison

144

Return and bridge filler panelsMorrison desks


Return filler Desk height 323/4� 11/8� 26� MK4-R3026-(P/V)-( )-(L/R) $591. $798. $1,136.383/4� 11/8� 26� MK4-R3626-(P/V)-( )-(L/R) 613. 861. 1,228.443/4� 11/8� 26� MK4-R4226-(P/V)-( )-(L/R) 653. 944. 1,313.503/4� 11/8� 26� MK4-R4826-(P/V)-( )-(L/R) 707. 1,068. 1,461.623/4� 11/8� 26� MK4-R6026-(P/V)-( )-(L/R) 800. 1,220. 1,673.683/4� 11/8� 26� MK4-R6626-(P/V)-( )-(L/R) 898. 1,309. 1,794.743/4� 11/8� 26� MK4-R7226-(P/V)-( )-(L/R) 1,018. 1,393. 1,976.

Bridge filler Desk height 381/2� 11/8� 26� MK4-B3026-(P/V)-( ) 591. 829. 1,168.441/2� 11/8� 26� MK4-B3626-(P/V)-( ) 613. 883. 1,259.501/2� 11/8� 26� MK4-B4226-(P/V)-( ) 653. 976. 1,372.561/2� 11/8� 26� MK4-B4826-(P/V)-( ) 707. 1,068. 1,520.681/2� 11/8� 26� MK4-B6026-(P/V)-( ) 829. 1,243. 1,764.741/2� 11/8� 26� MK4-B6626-(P/V)-( ) 925. 1,360. 1,941.801/2� 11/8� 26� MK4-B7226-(P/V)-( ) 1,043. 1,453. 2,063.

Order Code

Example: MK4-R3026-P-612-L

MK4 Desk panelR Desk panel type30 Width26 HeightP Surface type612 PaintL Left


Return filler Correspondingpanel widths: worksurface widths323/4� 30�383/4� 36�443/4� 42�503/4� 48�623/4� 60�683/4� 66�743/4� 72�

Bridge filler Correspondingpanel widths: worksurface

widths:381/2� 30�441/2� 36�501/2� 42�561/2� 48�681/2� 60�741/2� 66�801/2� 72�

Surface type:

P- PaintedV- Veneer

Application Notes

Return filler panels provideenclosure between a universal deskend panel and the end panel of areturn.

Return filler panels may also beconnected to a vertical panel toprovide enclosure for a desk ormachine height return off a panelsupported workstation. SpecifyMB1-FV brackets separately.

All 69�W and 75�W return fillerpanels are shipped with a centerstabilizing bracket, MB1-AUX-D.

A return filler panel includesbracket MB1-L1, filler panel/deskend panel and all connectinghardware.

Bridge filler panels are usedbetween two universal end panelsunder a bridge worksurface. Bridgefiller panels may also be specifiedfor desk enclosure between twovertical panels (specify bracketsMB1-FV separately.)

All 69�W, 75�W and 81�W bridgefiller panels are shipped with acenter stabilizing bracket,MB1-AUX-D.

Morrison

145

Wor

ksur

face

Pla

nnin

g

Bracketspanel planningend support and VDT brackets

description type w d h pattern no. paint

End support brackets-E with machine screws End support 18�D straight worksurface – 18� 11/4� MB3-E18M-( ) $64.24�D straight worksurface – 24� 11/4� MB3-E24M-( ) 70.30�D straight worksurface – 30� 11/4� MB3-E30M-( ) 77.36�D straight worksurface – 36� 11/4� MB3-E36M-( ) 89.

End support for 30� high panel 18�D straight worksurface – 18� 11/4� MB3-EC18M-( ) * 64.24�D straight worksurface – 24� 11/4� MB3-EC24M-( ) * 70.30�D straight worksurface – 30� 11/4� MB3-EC30M-( ) * 77.

VDT support 36�D VDT worksurface 36� 3/8� 11/4� MB3-EV36M-( ) 89.42�D VDT worksurface 42� 3/8� 11/4� MB3-EV42M-( ) 91.48�D VDT worksurface 48� 3/8� 11/4� MB3-EV48M-( ) 98.

End support brackets-E with wood screws End support 18�D straight worksurface – 18� 11/4� MB3-E18W-( ) 64.24�D straight worksurface – 24� 11/4� MB3-E24W-( ) 70.30�D straight worksurface – 30� 11/4� MB3-E30W-( ) 77.36�D straight worksurface – 36� 11/4� MB3-E36W-( ) 89.

End support for 30� high panel 18�D straight worksurface – 18� 11/4� MB3-EC18W-( ) * 64.24�D straight worksurface – 24� 11/4� MB3-EC24W-( ) * 70.30�D straight worksurface – 30� 11/4� MB3-EC30W-( ) * 77.

VDT support 36�D VDT worksurface 36� 3/8� 11/4� MB3-EV36W-( ) 89.42�D VDT worksurface 42� 3/8� 11/4� MB3-EV42W-( ) 91.48�D VDT worksurface 48� 3/8� 11/4� MB3-EV48W-( ) 98.

VDT end support bracket kits-V with machinescrews (includes 2 VDT end brackets and 1stabilizer bracket)

36�D VDT worksurface 36� 3/8� 11/4� MB3-V36M-( ) 210.42�D VDT worksurface 42� 3/8� 11/4� MB3-V42M-( ) 222.48�D VDT worksurface 48� 3/8� 11/4� MB3-V48M-( ) 242.

Order Code

Example: MB3-E30-M-612

MB3 BracketE Bracket type30 Bracket depthM Machine screws612 Paint finish


Bracket type:E- End supportV- VDT corner end supportC- Cantilever


Application Notes

E-type end support brackets support11/4� or 13/4� worksurface fromconnector tracks at both back andfront.

EV- bracket supports one back edgeof VDT or curvilinear corner surfacewhen other side is desk-supported.

V-type end support bracket kitssupport both back edges of 90°VDT corner worksurfaces.

V-kits include two end support andone AUX-V.

Brackets with machine screws(suffix-M) are used with MW2- andMU1- worksurfaces.

Brackets with wood screws(suffix-W) are used with LU1- andAWM2- worksurfaces.

*MB3-EC18-( ), MB3-EC24-( ),and MB3-EC30-( ) end supportbrackets should be specified whensupporting worksurfaces from 30�high panels or for supportingCurrents work-surfaces for Morrisonfrom all panel heights.

Morrison

146

Bracketspanel planningend support and VDT brackets


VDT end support bracket kits-V with woodscrews (includes 2 VDT end brackets and 1stabilizer bracket)

36�D VDT worksurface 36� 3/8� 11/4� MB3-V36W-( ) $210.42�D VDT worksurface 42� 3/8� 11/4� MB3-V42W-( ) 222.48�D VDT worksurface 48� 3/8� 11/4� MB3-V48W-( ) 242.

Order Code

Example: MB3-E30-M-612

MB3 BracketE Bracket type30 Bracket depthM Machine screws612 Paint finish


Bracket type:E- End supportV- VDT corner end supportC- Cantilever


Application Notes

E-type end support brackets support11/4� or 13/4� worksurface fromconnector tracks at both back andfront.

EV- bracket supports one back edgeof VDT or curvilinear corner surfacewhen other side is desk-supported.

V-type end support bracket kitssupport both back edges of 90°VDT corner worksurfaces.

V-kits include two end support andone AUX-V.



*MB3-EC18-( ), MB3-EC24-( ),and MB3-EC30-( ) end supportbrackets should be specified whensupporting worksurfaces from 30�high panels or for supportingCurrents work-surfaces for Morrisonfrom all panel heights.

Morrison

147

Wor

ksur

face

Pla

nnin

g

Bracketspanel planningcantilever brackets


Cantilever brackets-C with machine screws 18�D worksurface 1/2� 15� 81/2� MB2-C18M-(L/R)-( ) $85.24�D worksurface 1/2� 21� 111/2� MB2-C24M-(L/R)-( ) 99.30�D worksurface 1/2� 24� 131/2� MB2-C30M-(L/R)-( ) 116.

Cantilever brackets-C with wood screws 18�D worksurface 1/2� 15� 81/2� MB2-C18W-(L/R)-( ) 85.24�D worksurface 1/2� 21� 111/2� MB2-C24W-(L/R)-( ) 99.30�D worksurface 1/2� 24� 131/2� MB2-C30W-(L/R)-( ) 116.

Cantilever tie-clips-AUX-C (10) – – – MB1-AUX-C 19.

Worksurface/vertical panel spacer-Y withmachine screws

1/16� 15� 81/2� MB2-YM-(L/R)-( ) 72.

Worksurface/vertical panel spacer-Y with woodscrews

1/16� 15� 81/2� MB2-YW-(L/R)-( ) 72.

Order Code

Example: MB2-C24W-R-612

MB2 BracketC Bracket type24 Bracket depthW Wood screwsR Left or right612 Paint finish


Bracket type:E- End supportV- VDT corner end supportC- CantileverY- Worksurface/vertical

panel spacer


Application Notes

C-type cantilever brackets supportworksurfaces from connector trackat the back. Specify left or right.

AUX-C cantilever tie-clips tietogether two adjacent cantileverbrackets for added stability.

Y-type spacer brackets secure theend of pedestal-supportedworksurfaces to a connector track. Ybrackets maintain the3/8� wire dropand allow pedestal fronts to alignwith the end of the worksurface.



Morrison

148

Bracketspanel planningflat brackets, cantilever brackets


Flat brackets with machine screws 18� surface 31/2� 8� – MB3-F18M $50.24� surface 31/2� 14� – MB3-F24M 54.30�/36� surfaces 31/2� 20� – MB3-F30M 62.

Flat brackets with wood screws 18� surface 31/2� 8� – MB3-F18W 50.24� surface 31/2� 14� – MB3-F24W 54.30�/36� surfaces 31/2� 20� – MB3-F30W 62.

Cantilever bridging with machine screws 18�D surfaces support brackets MB1-CB18M 121.24�D surfaces MB1-CB24M 143.30�D surfaces MB1-CB30M 161.

Cantilever bridging with wood screws 18�D surfaces support brackets MB1-CB18W 121.24�D surfaces MB1-CB24W 143.30�D surfaces MB1-CB30W 161.

VDT support panel kit-VP with machine screws 1� 12� 24� MB1-VP-1224M 426.1� 12� 26� MB1-VP-1226M 438.

VDT support panel kit-VP with wood screws 1� 12� 24� MB1-VP-1224W 426.1� 12� 26� MB1-VP-1226W 438.

Order Code

Example: MB3-F24M

MB3 BracketF Bracket type24 Bracket depthM Machine screws


Bracket type:F- FlatCB- Cantilever bridgingVP- VDT support panel kit

Application Notes

Flat bridging brackets attach twoworksurfaces at the same height in90° ‘‘L’’, VDT or end-to-endapplications (in conjunction withfloorstanding pedestal support).

Flat bridging brackets are universalfor freestanding or panel basedplanning.

Cantilever bridging bracketsprovide cantilever support forcurvilinear and VDT cornersurfaces and returns at the sameheight. Cantilever bridging bracketsmay be used in conjunction withVDT end support brackets.

VP-type brackets attach anywhereunder worksurface to provideadditional support in largefreestanding desks or in verticalpanel applications.



Morrison

149

Wor

ksur

face

Pla

nnin

g

Bracketspanel planningdesk end panel, pedestal extender, filler panel


Desk end panel/vertical panel-N with machine screws – – – MB1-NM-(L/R)-( ) $120.with wood screws – – – MB1-NW-(L/R)-( ) 120.

Pedestal extender-R shallow 24�, desk ht. 1� 6� 26� MB2-RS2426-(L/R)-( ) 252.30�, desk ht. 1� 12� 26� MB2-RS3026-(L/R-( ) 295.

deep 30�, desk ht. 1� 6� 26� MB2-RD3026-(L/R)-( ) 252.36�, desk ht. 1� 12� 26� MB2-RD3626-(L/R)-( ) 295.

Filler panel/vertical panel-FV Desk height MB1-FV26-(L/R)-( ) 100.

Transitional filler panel/worksurface-W Desk height with machine screws MB1-W20M-(L/R)-( ) 120.Desk height with wood screws MB1-W20W-(L/R)-( ) 120.

Order Code

Example: MB2-RS2426-R-612

MB2 BracketR Pedestal extenderS Pedestal depth24 Worksurface depth26 Bracket heightR Right-hand612 Paint finish


Specify left or right end of return orbridge worksurface.

Bracket type:N- Desk end panel/vertical

panelRS- 18�D pedestal extenderRD- 24�D pedestal extenderFV- Filler panel/vertical panelW- Transitional filler/

worksurfaceSpecify paint finish.

Application Notes

N-type desk end panel/verticalpanel brackets ensure alignmentand rigidity between worksurface,universal end panel or pedestalextender, and back panel.

R-type pedestal extender bracketsclose the gap between a pedestaland a vertical panel. Pedestalextender brackets can receive anMB1-N bracket to secure to avertical panel, or a kneehole fillerpanel. Description indicatesapplication by worksurfacedepth/pedestal depth/pedestalheight.

W-type filler panel/worksurfacebrackets are used at the end of atransitional filler panel nearest tothe vertical panel. The same bracketMB1-W20( )-(L/R) is used for bothmachine and desk height.

FV-type filler panel/vertical panelbrackets are used when a return orbridge filler panel is adjacent to avertical panel end connector.



Morrison

150

Bracketspanel planningend panel and filler panel


Desk end panel/worksurface-T with machinescrews

18� surfaces MB1-T18M $50.24�-36� surfaces MB1-T24M 54.

Desk end panel/worksurface-T with wood screws 18� surfaces MB1-T18W 50.24�-36� surfaces MB1-T24W 54.

Conference end panel/worksurface D MB1-D 106.

Desk panel mid span bracket - AUX-D with machine screws – – MB1-AUX-DM 46.with wood screws – – MB1-AUX-DW 46.

Filler panel/desk end panel- L1 – – – MB1-L1 46.

Order Code

Example: MB1-T18W

MB1 BracketT Bracket type18 Bracket heightW Wood screws


Bracket type:T- Desk end

panel/worksurfaceD- Conference end

panel/worksurfaceAUX-D- Filler panel/worksurfaceL1- Filler panel/desk end

panel

Application Notes

Brackets on this page arereplacement parts for Morrison deskpanels.

T-type bracket joins desk end panelto worksurface (included in all endpanels).

D-type bracket provides additionalstability for conference end panels(included in all conference endpanels.)

L-bracket joins end panel tokneehole or return filler (includedwith all filler panels.

AUX-D bracket is included in allfiller panels greater than 60� wide.



Morrison

151

Wor

ksur

face

Pla

nnin

g

Morrison Network Desk Systemdesk supports


Straight desk supports 24� 24� 6� 26� MN2-D2400( ) $761.30� 30� 6� 26� MN2-D3000( ) 768.36� 36� 6� 26� MN2-D3600( ) 787.42� 42� 6� 26� MN2-D4200( ) 806.48� 48� 6� 26� MN2-D4800( ) 817.54� 54� 6� 26� MN2-D5400( ) 829.60� 60� 6� 26� MN2-D6000( ) 849.66� 66� 6� 26� MN2-D6600( ) 869.72� 72� 6� 26� MN2-D7200( ) 901.78� 78� 6� 26� MN2-D7800( ) 928.

90° corner supports 36� x 36� 36� 36� 26� MN2-D3636( ) 1,258.42� x 42� 42� 42� 26� MN2-D4242( ) 1,283.48� x 48� 48� 48� 26� MN2-D4848( ) 1,317.60� x 60� 60� 60� 26� MN2-D6060( ) 1,379.72� x 72� 72� 72� 26� MN2-D7272( ) 1,472.

Return supports 24� 18� 6� 26� MN2-D0024( ) 445.30� 24� 6� 26� MN2-D0030( ) 449.36� 30� 6� 26� MN2-D0036( ) 464.42� 36� 6� 26� MN2-D0042( ) 483.48� 42� 6� 26� MN2-D0048( ) 498.54� 48� 6� 26� MN2-D0054( ) 517.60� 54� 6� 26� MN2-D0060( ) 530.66� 60� 6� 26� MN2-D0066( ) 543.72� 66� 6� 26� MN2-D0072( ) 575.78� 72� 6� 26� MN2-D0078( ) 607.

Order Code

Example: MN2-D4848-612

MN2 Network componentD Desk support48 Width of desk48 Width of return612 Paint finish


Specify desk support the width ofthe worksurface to be supported.

Corner desk support is used underany combination of worksurfaces upto 72�. Specify flat bracketsseparately.

Return support may be connected tostraight desk support to form other90° corner support combinations.Specify return support the sum ofthe width of the return and thedepth of the desk (or width of VDT).

Desk spans wider than 60� requirepedestal support at one end of theworksurface.

Specify painted finish.

Application Notes

Corner legs include two grommets(3� x 21/2�) in back and side, forcable and power distribution toadjacent desk supports. Allgrommets have caps, 31/4� x 31/4�.Two grommet sleeves to protectcables are also provided.

Desk supports enclose the back 6�of freestanding Morrison Systemdesks, enabling full horizontal andvertical wire management, andgiving the structural supportnecessary for desk mountedoverhead storage.

Straight desk supports are specifiedthe same width as the desk (or VDT+ return). Return supports continuethe wireway for L-shape desks,supporting the end of the desk andwidth of the return. 90° cornersupports may be used to supportdesk-and-return orVDT-with-extensions.

Desk supports consist of nominal 6�x 6� corner legs and horizontalmodesty/wireway channel 8�H x11/2�D.

Straight desk supports include 2legs and 1 channel; 90° cornersupports include 3 legs and 2channels. Return supports include 1leg and 1 channel and connect tostraight desk support to form 90°corner. All components areinterchangeable and non-handed.

Worksurfaces are supported by desksupports in conjunction with endpanels, pedestals or bracketslinking to adjacent desks.

MN2- desk support corner legs andwireway channels areinterchangeable with original MN1-desk supports.

Hardware kits for beam and legcomponents include metal inserts.Tops will be drilled for fieldinstallation.

Morrison

152

Morrison Network Desk Systemdesk end and filler panels


End panel for desk support 6� 11/4� 26� MN2-E06-( ) $445.71/2� 11/4� 26� MN2-E09-( ) 468.

18�d 101/2� 11/4� 26� MN2-E12-( ) 498.24�d 161/2� 11/4� 26� MN2-E18-( ) 579.30�d 221/2� 11/4� 26� MN2-E24-( ) 639.

Transitional support panel Support panel 6� 1� 26� MN2-RDR( ) 449.Stanchion adapter kit – – – MN2-RSAK 23.

Return support adapter 6� 11/4� 26� MN2-RER-( ) 250.

End panel wireway 18�d 18� 11/2� 8� MN2-EW18-( ) 250.24�d 24� 11/2� 8� MN2-EW24-( ) 275.

Order Code

Example: MN2-E24-612

MN2 Morrison NetworkE End panel24 Depth612 Finish


Specify desk end and filler panels tocorrespond with desk depth andwidth. End panels are nominally 6�less deep than desk to accommodatedesk support. Actual filler panelsare 12� less wide than desk, to fitbetween desk support corner legs.

Return support adapter attaches tofront edge of end panel. Specifyreturn support in same nominalwidth as return worksurface.

Specify painted finishes for endpanels, filler panels and accessories.

Application Notes

Desk end panels are used to supportan end of a freestanding deskwithout pedestal support. Integralbrackets permit application on leftor right end of desk.

For desk planning applications withfull end panel and desk support:

Use MN2-E12 with 18�Dworksurface



For 24�D VDT desks withextensions, specify MN2-E06 endpanel and single bridging bracket.For 30�D VDT, specify MN2-E12end panel and single bridgingbracket.

For support of one end of 24�Dreturn with desk support adjacent tofreestanding Interaction cornertable, specify MN2-E09.

Desk end panels do not permitadjacent pedestal attachment.

Transitional support panel secures areturn desk support to Morrisonvertical panel connector track inintegrated desk and panel planning.

Transitional panel also acts as a legor pedestal extender to stabilizevertical panels supporting overheadstorage.

Use MN2-RDR to stabilize eachside of vertical panel at half-roundconference worksurface.

Transitional panel includes onegrommet.

Return support adapter is specifiedwhen adding a return worksurface toa desk with end panel. Adapterextends from end panel to returnsupport. End panel wirewayattaches to inside of end panel tolink desk support wireway to returnsupport.

Filler panels provide full enclosurefor desk supports, filling thekneehole space between corner legs.They are specified in addition tocorresponding desk supports.

Morrison

153

Wor

ksur

face

Pla

nnin

g

Morrison Network Desk Systemdesk end and filler panels


Filler panel for desk support 24�w 12� 1/2� 18� MN2-F24( ) $358.30�w 18� 1/2� 18� MN2-F30( ) 386.36�w 24� 1/2� 18� MN2-F36( ) 414.42�w 30� 1/2� 18� MN2-F42( ) 445.48�w 36� 1/2� 18� MN2-F48( ) 498.54�w 42� 1/2� 18� MN2-F54( ) 553.60�w 48� 1/2� 18� MN2-F60( ) 639.66�w 54� 1/2� 18� MN2-F66( ) 690.72�w 60� 1/2� 18� MN2-F72( ) 770.78�w 66� 1/2� 18� MN2-F78( ) 857.

Order Code

Example: MN2-E24-612

MN2 Morrison NetworkE End panel24 Depth612 Finish


Specify desk end and filler panels tocorrespond with desk depth andwidth. End panels are nominally 6�less deep than desk to accommodatedesk support. Actual filler panelsare 12� less wide than desk, to fitbetween desk support corner legs.

Return support adapter attaches tofront edge of end panel. Specifyreturn support in same nominalwidth as return worksurface.

Specify painted finishes for endpanels, filler panels and accessories.

Application Notes

Desk end panels are used to supportan end of a freestanding deskwithout pedestal support. Integralbrackets permit application on leftor right end of desk.

For desk planning applications withfull end panel and desk support:




For 24�D VDT desks withextensions, specify MN2-E06 endpanel and single bridging bracket.For 30�D VDT, specify MN2-E12end panel and single bridgingbracket.

For support of one end of 24�Dreturn with desk support adjacent tofreestanding Interaction cornertable, specify MN2-E09.

Desk end panels do not permitadjacent pedestal attachment.

Transitional support panel secures areturn desk support to Morrisonvertical panel connector track inintegrated desk and panel planning.

Transitional panel also acts as a legor pedestal extender to stabilizevertical panels supporting overheadstorage.

Use MN2-RDR to stabilize eachside of vertical panel at half-roundconference worksurface.

Transitional panel includes onegrommet.

Return support adapter is specifiedwhen adding a return worksurface toa desk with end panel. Adapterextends from end panel to returnsupport. End panel wirewayattaches to inside of end panel tolink desk support wireway to returnsupport.

Filler panels provide full enclosurefor desk supports, filling thekneehole space between corner legs.They are specified in addition tocorresponding desk supports.

Morrison

154

Morrison Network Desk Systembrackets


Desk support light seal MN2-DD( ) $165.

Desk support to pedestal MN1-DP 23.

Flat brackets with machine screws 18�D worksurface 31/2� 8� – MB3-F18M 50.24�D worksurface 31/2� 14� – MB3-F24M 54.30�/36�D worksurface 31/2� 20� – MB3-F30M 62.

Single bridging bracket 18�D worksurface 31/2� 10� 51/4� MB1-SB18(L/R) 124.24�D worksurface 31/2� 131/2� 51/4� MB1-SB24(L/R) 150.30�D worksurface 31/2� 191/2� 51/2� MB1-SB30(L/R) 160.

Dual bridging bracket 24�D worksurfaces 33/4� 131/2� 4� MB1-DB24 255.30�D worksurfaces 33/4� 191/2� 51/2� MB1-DB30 284.

Transitional support panel Support panel 6� 1� 26� MN2-RDR( ) 449.Stanchion adapter kit – – – MN2-RSAK 23.

Worksurface stiffener 54� worksurface 43� 21/2� 1� MB1-WS54 167.60� worksurface 49� 21/2� 1� MB1-WS60 167.66� worksurface 55� 21/2� 1� MB1-WS66 167.72� worksurface 61� 21/2� 1� MB1-WS72 167.

Order Code

Example: MB1-SB24-L

MB1 BracketSB Type24 Worksurface sizeL Left


Specify paint finish for transitionalsupport panel and light seal.

All other brackets are black.

Specify single bridging bracket leftor right handed (left for conferencetop on left when seated atworksurface).

Application Notes

F-type flat brackets joinworksurfaces at the same height, indesk or panel system application.

SB bridging brackets are used tojoin desk supported worksurface to1/2 round or teardrop, whenworksurface is not pedestalsupported. SB brackets may also beused with transitional support panelto join worksurface to teardrop or1/2 round with vertical panel.

MB1-SB18(L/R) single bridgingbracket supports freestanding splitVDT with 24� returns; it should beused on each side in combinationwith 9� end panels MNZE09( ).

DB bridging bracket is used to joinadjacent desk supports andworksurfaces.

For pedestal or end panel supportedworksurface to half-round orteardrop, use flat brackets andsupport column.

For clear access kneespace athalf-round with vertical panel, usetransitional support panel, singlebridging bracket, and supportcolumn.

Desk support light seal wrapsaround corner legs of adjacent desksupports, and provides additionallay-in cable.

Worksurface stiffeners may be usedto span distances over 48� withoutpedestal support. (Use one sizesmaller than worksurface widthwhen supporting one end with apedestal.) Specify the patternnumber which corresponds to thewidth to be spanned, e.g.MB1-WS54 enables a 3-ply MU1 orLU1 worksurface to span 54�.

Morrison

155

Wor

ksur

face

Pla

nnin

g

Morrison Network Desk Systemdesk mounted overhead storage, counter, and power monument


Stanchions for desk mounted Reuter overheadstorage, pair

13/4� worksurface 5� 5� 20� RO2-NS20( ) $698.11/4� worksurface 5� 5� 201/2� RO2-NS21( ) 698.

Stanchions for desk mount counter, pair 11/4� worksurface 5� 5� 131/2� MN2-NS14( ) 756.

Reinforcement channel for desk mount counters 60� counter 48� 2� 1/2� MS2-URC60-N 154.66� counter 54� 2� 1/2� MS2-URC66-N 154.72� counter 60� 2� 1/2� MS2-URC72-N 154.78� counter 66� 2� 1/2� MS2-URC78-N 154.84� counter 72� 2� 1/2� MS2-URC84-N 154.90� counter 78� 2� 1/2� MS2-URC90-N 154.

Desktop power monument 13/4� worksurfaces 5� 5� 13� MN2-PMW( ) 379.11/4� worksurfaces 5� 5� 131/2� MN2-PMU( ) 379.

Order Code

Example: MN2-PMU-612

MN2 NetworkPM Power monumentU 11/4� worksurface612 Paint finish


Specify paint finish for overheadsupports, monuments, and covers:

Application Notes

Stanchions and overhead supportsare bolted to desk supportedworksurfaces with grommets.Overheads may span over end ofworksurface and width of returnworksurface if grommets and desksupport legs align with stanchions.

Reuter stanchions support anywidth Reuter overhead cabinet, orshelf, and include cover plates andmounting hardware.

Stanchions for desk mountedcounter may be specified withMS2-shelves on page . Stanchionssupport shelf underside at 42�H,positioned above 15�H privacyscreen.

Specify reinforcement channel forcounters wider than 60�.

All stanchions include internal andsurface concealment channels fortask light cords.

Desktop power monument attachesto grommet in freestanding orpanel-supported worksurfaces.Monument includes top cap to alignwith 42�H panels, and front coverwith four outlet openings.

Specify stanchion outlets coverwhen planning PDC modules and/orpower module in Reuter stanchions.Stanchion outlets cover has fouropenings; specify blank outlet fillersfor unused openings.

Specify desktop power module fordesktop outlets in power monumentor stanchions (see page 161).

Morrison

156

Morrison Network Desk Systemdesk mounted overhead storage, counter, and power monument


Stanchion outlets cover 13/4� worksurfaces 7� 1/2� 15� MN2-SO20( ) $66.11/4� worksurfaces 7� 1/2� 151/2� MN2-SO21( ) 66.

Blank outlet filler (10) MN2-OF 64.

Order Code

Example: MN2-PMU-612

MN2 NetworkPM Power monumentU 11/4� worksurface612 Paint finish


Specify paint finish for overheadsupports, monuments, and covers:

Application Notes

Stanchions and overhead supportsare bolted to desk supportedworksurfaces with grommets.Overheads may span over end ofworksurface and width of returnworksurface if grommets and desksupport legs align with stanchions.

Reuter stanchions support anywidth Reuter overhead cabinet, orshelf, and include cover plates andmounting hardware.

Stanchions for desk mountedcounter may be specified withMS2-shelves on page . Stanchionssupport shelf underside at 42�H,positioned above 15�H privacyscreen.

Specify reinforcement channel forcounters wider than 60�.

All stanchions include internal andsurface concealment channels fortask light cords.

Desktop power monument attachesto grommet in freestanding orpanel-supported worksurfaces.Monument includes top cap to alignwith 42�H panels, and front coverwith four outlet openings.

Specify stanchion outlets coverwhen planning PDC modules and/orpower module in Reuter stanchions.Stanchion outlets cover has fouropenings; specify blank outlet fillersfor unused openings.

Specify desktop power module fordesktop outlets in power monumentor stanchions (see page 161).

Morrison

157

Wor

ksur

face

Pla

nnin

g

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for desk supportspower rails


Power rail for desk 30�w 12� 2� 2� MR3-NE30 $291.36�w 18� 2� 2� MR3-NE36 323.42�w 24� 2� 2� MR3-NE42 331.48�w 30� 2� 2� MR3-NE48 345.54�w 30� 2� 2� MR3-NE54 353.60�w 42� 2� 2� MR3-NE60 367.66�w 48� 2� 2� MR3-NE66 385.72�w 54� 2� 2� MR3-NE72 396.78�w 60� 2� 2� MR3-NE78 410.

Multiple outlet power rail for desk 48� 30� 2� 2� MR3-NE48-4 484.60� 42� 2� 2� MR3-NE60-4 505.66� 48� 2� 2� MR3-NE66-4 534.72� 54� 2� 2� MR3-NE72-4 563.78� 60� 2� 2� MR3-NE78-4 591.

Order Code

Example: MR3-NE30

MR3 Morrison racewayN For Network desksE Eight wire 2 + 230 for 30� panel



Application Notes

Power rails are the primary powerdistribution component of theMorrison 2 + 2 Raceway. Each railprovides outlet mounting positionsand receptacles for branching powerconnectors at each end. Endbrackets permit lay-in cabling in thedesk support trough.

Rails accept two outlets, 12� fromeither end of the desk. Multipleoutlet rails for 48� - 78� desksaccept 4 duplex outlets, 12� and 18�from either end of desk.

Morrison

158

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for desk supportsoutlets, connectors, jumpers, infeeds


Duplex outlets, black Circuit A MR3-DA $63.Circuit B MR3-DB 63.Circuit X MR3-DX 63.Circuit Y MR3-DY 63.

Duplex outlets, orange Circuit X MR3-DXO 74.Circuit Y MR3-DYO 74.

Duplex outlets, black with orange triangle Circuit X MR3-DXT 74.Circuit Y MR3-DYT 74.

Duplex outlets, black with controlled symbol Circuit A MR3-DAC 70.Circuit B MR3-DBC 70.Circuit X MR3-DXC 70.Circuit Y MR3-DYC 70.

Power connector Straight/L 18� 2� 2� MR3-EPCM 139.Crossover 24� 2� 2� MR3-EJ6 154.Panel/desk 36� 2� 3� MR3-NEPD 505.

Jumper 12� end panel 30� 2� 2� MR3-EJ12 166.18� end panel 36� 2� 2� MR3-EJ18 179.24� end panel 42� 2� 2� MR3-EJ24 190.24� desk 42� 2� 2� MR3-EJ24 190.30� desk 48� 2� 2� MR3-EJ30 203.36� desk 54� 2� 2� MR3-EJ36 222.42� desk 60� 2� 2� MR3-EJ42 230.48� desk 66� 2� 2� MR3-EJ48 242.54� desk 75� 2� 2� MR3-EJ54P 255.

Order Code

Example: MR3-NEPD

MR3 Morrison racewayN For Network desksE Eight wire 2 + 2PD Panel/desk



Application Notes

Power infeeds connect buildingpower supply to a cluster ofinterconnected power rails. Desksupport infeed snaps into the end ofany desk power rail, and includes 6foot liquid-tight conduit and pigtailfor connection to floor or wallelectrical box. Panel/desk connectortransmits power between the end ofa desk support rail and any panelbase power rail outlet position.

Hardwire infeed, used in all NewYork City installations, includesjunction box that mounts to theinside of a desk support corner leg.Electrical contractor suppliesconduit from building power supplyto box and trims power connector tolength. Hardwire kit includespainted finish cover panel.

Duplex outlets are preconfigured toaccess one of the four circuits, A, B,X, Y, and snap into any standardoutlet location (12� from either endof desk). Duplexes on circuits X andY may be specified with orange faceor black face with orange triangle tosignify protected circuits forelectronic equipment; all otherduplexes are black.

Power connectors transmit powerbetween adjacent powered desks.Crossover transmits power‘‘diagonally’’ between non-adjacentdesks in a cluster of 3 or 4 desksupports.

Jumpers connect rails on either sideof a desk end panel or desk supportwithout outlets.

Morrison

159

Wor

ksur

face

Pla

nnin

g

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for desk supportsoutlets, connectors, jumpers, infeeds


Jumper 60� desk 81� 2� 2� MR3-EJ60P $269.66� desk 87� 2� 2� MR3-EJ66P 279.72� desk 93� 2� 2� MR3-EJ72P 291.78� desk 99� 2� 2� MR3-EJ78P 312.

Power infeeds Panel/desk connector MR3-NEPD 505.Desk support infeed MR3-NEPI 385.Hardwire infeed (NYC) MR3-NEPNY( ) 505.

Order Code

Example: MR3-NEPD

MR3 Morrison racewayN For Network desksE Eight wire 2 + 2PD Panel/desk



Application Notes



Duplex outlets are preconfigured toaccess one of the four circuits, A, B,X, Y, and snap into any standardoutlet location (12� from either endof desk). Duplexes on circuits X andY may be specified with orange faceor black face with orange triangle tosignify protected circuits forelectronic equipment; all otherduplexes are black.



Morrison

160

Power distribution components2+2™ Racewayfour circuit, eight-wire raceway for desk supportsaccessories


Desktop power module From desk support power rail MR3-NESD $385.From panel MR3-NESP 611.Hardwire MR3-NESH 484.

Grommet outlet module Directly above panel outlet MR3-EGM 686.Duplex outlet, circuit A MR1-DA 51.Duplex outlet, circuit B MR1-DB 51.From desk support MR3-NEGM 563.Hardwire MR3-EGMH 505.Up to 24� away from panel outlet MR3-EGM48 713.


Wire manager clips (10) Under worksurface MR1-WC 55.

High capacity wire managers (10) Panel connector ML1-HCWM24 353.

Desk to desk cable sleeves (10) MN2-CS 65.

Order Code

Example: MR3-NESD

MR3 Morrison racewayN NetworkE Eight wire 2 + 2S Power infeedD Desk feed



First duplex in desktop powermodule is wired to Circuits A and Band is black; second duplex is wiredto Circuits X and Y and is orange.

Application Notes

Desktop power module is powercomponent for desktop powermonument or overhead supportstanchion. Power module includestwo duplex outlets and powerconnector.



Cable sleeves contain and protectpower and data cables passingbetween desk supports.

Morrison

161

Wor

ksur

face

Pla

nnin

g

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for desk supportspower rail and module


Power rail for desk support 30�w 12� 2� 2� MR3-NT30 $331.36�w 18� 2� 2� MR3-NT36 353.42�w 24� 2� 2� MR3-NT42 367.48�w 30� 2� 2� MR3-NT48 385.54�w 42� 2� 2� MR3-NT54 396.60�w 48� 2� 2� MR3-NT60 410.66�w 54� 2� 2� MR3-NT66 433.72�w 60� 2� 2� MR3-NT72 442.78�w 66� 2� 2� MR3-NT78 460.

Multiple outlet power rail for desk 48�w 30� 2� 2� MR3-NT48-4 591.60�w 42� 2� 2� MR3-NT60-4 611.66�w 48� 2� 2� MR3-NT66-4 640.72�w 54� 2� 2� MR3-NT72-4 663.78�w 60� 2� 2� MR3-NT78-4 686.

Desktop power module From desk support power rail MR3-NESD 385.From panel MR3-NESP 611.Hardwire MR3-NESH 484.

Order Code

Example: MR3-NT-30

MR3 Morrison racewayNT Ten wire 3 + 330 For 30� panel



Application Notes

Power rails are the primary powerdistribution component of theMorrison 3 + 3 Raceway. Each railprovides outlet mounting positionsand receptacles for branching powerconnectors at each end.

Rails accept two outlets, 12� fromeither end of desk. Multiple outletrails for 48� - 78� desks accept fourduplex outlets, 12� and 18� fromeither end of desk.

Desktop power module is powercomponent for Desktop PowerMonument or overhead supportstanchion. Power module includestwo duplex outlets, and powerconnector. First duplex in desktoppower module is wired to Circuits Aand B and is black; second duplexis wired to Circuits X and Y and isorange.

Morrison

162

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for desk supportsconnectors and jumpers


Power connector Straight/L 18� 2� 2� MR3-TPCM $179.Crossover 24� 2� 2� MR3-TJ6 189.Panel/desk 36� 2� 3� MR3-NTPD 591.

Jumper 12� end panel 30� 2� 2� MR3-TJ12 190.18� end panel 36� 2� 2� MR3-TJ18 203.24� desk 42� 2� 2� MR3-TJ24 222.24� end panel 42� 2� 2� MR3-TJ24 222.30� desk 48� 2� 2� MR3-TJ30 230.36� desk 54� 2� 2� MR3-TJ36 242.42� desk 60� 2� 2� MR3-TJ42 269.48� desk 66� 2� 2� MR3-TJ48 291.54� desk 75� 2� 2� MR3-TJ54P 312.60� desk 81� 2� 2� MR3-TJ60P 323.66� desk 87� 2� 2� MR3-TJ66P 349.72� desk 93� 2� 2� MR3-TJ72P 345.78� desk 99� 2� 2� MR3-TJ78P 372.

Order Code

Example: MR3-TJ12

MR3 Morrison racewayT Ten wire 3 + 3 jumperJ Jumper12 For 12� end panel



Application Notes



Power connectors and jumpers areenclosed in steel flexible conduit.

Morrison

163

Wor

ksur

face

Pla

nnin

g

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for desk supportsinfeeds, outlets and cable sleeves


Power infeeds Desk support infeed MR3-NTPI $433.Hardwire infeed (NYC) MR3-NTPNY( ) 591.Panel/desk connector MR3-NTPD 591.

Duplex outlets, black Circuit A MR3-DA 63.Circuit B MR3-DB 63.Circuit C MR3-DC 63.Circuit X MR3-DX 63.Circuit Y MR3-DY 63.Circuit Z MR3-DZ 63.

Duplex outlets, orange Circuit X MR3-DXO 74.Circuit Y MR3-DYO 74.Circuit Z MR3-DZO 74.

Duplex outlets, black with orange triangle Circuit X MR3-DXT 74.Circuit Y MR3-DYT 74.Circuit Z MR3-DZT 74.

Duplex outlets, black with controlled symbol Circuit A MR3-DAC 70.Circuit B MR3-DBC 70.Circuit C MR3-DCC 66.Circuit X MR3-DXC 70.Circuit Y MR3-DYC 70.Circuit Z MR3-DZC 66.

Order Code

Example: MR3-NTPI

MR3 Morrison racewayN Network desk supportT Ten wire 3 + 3PI Power infeed


Morrison 3 + 3™ Raceway is afour-circuit, eight-wire modularpower distribution system, for use inMorrison panels and Network desksupports. 3 + 3™ Racewaycomponents distribute three 20-ampconvenience circuits (A, B, C), withneutral and ground, and threeprotected 20-amp circuits (X, Y, Z)with separate neutral and ground.

Duplex outlet circuits aredesignated by white letters on blackbackground, or black letters onorange background.

Specify paint finishes for hardwireinfeed kit.

Application Notes



Duplex outlets are preconfigured toaccess one of the six circuits, A, B,C, X, Y, Z, and snap into anystandard outlet location. Duplexeson circuits X, Y, Z may be specifiedwith orange face or black face withorange triangle to signify protectedcircuits for electronic equipment; allother duplexes are black.




Morrison

164

Power distribution components3+3™ Racewaysix circuit, ten-wire raceway for desk supportsinfeeds, outlets and cable sleeves


Grommet outlet module Duplex outlet, circuit A MR1-DA $51.Duplex outlet, circuit B MR1-DB 51.From desk support MR3-NEGM 563.Hardwire MR3-EGMH 505.


Desk to desk cable sleeves (10) MN2-CS 65.

Order Code

Example: MR3-NTPI

MR3 Morrison racewayN Network desk supportT Ten wire 3 + 3PI Power infeed


Morrison 3 + 3™ Raceway is afour-circuit, eight-wire modularpower distribution system, for use inMorrison panels and Network desksupports. 3 + 3™ Racewaycomponents distribute three 20-ampconvenience circuits (A, B, C), withneutral and ground, and threeprotected 20-amp circuits (X, Y, Z)with separate neutral and ground.

Duplex outlet circuits aredesignated by white letters on blackbackground, or black letters onorange background.

Specify paint finishes for hardwireinfeed kit.

Application Notes



Duplex outlets are preconfigured toaccess one of the six circuits, A, B,C, X, Y, Z, and snap into anystandard outlet location. Duplexeson circuits X, Y, Z may be specifiedwith orange face or black face withorange triangle to signify protectedcircuits for electronic equipment; allother duplexes are black.




Morrison

165

Wor

ksur

face

Pla

nnin

g

Floorstanding pedestals18�D, 24�D, and 30�D

description type w d h pattern no. P1 P2 P3 V1 V2

2 box, 1 file Desk height 147/8� 18� 265/8� MD6-S2B1F( )-( ) $1,541. $1,541. $1,618. $1,976. $2,242.147/8� 24� 265/8� MD6-D2B1F( )-( ) 1,729. 1,729. 1,818. 2,186. 2,396.147/8� 30� 265/8� MD6-E2B1F( )-( ) 1,924. 1,924. 2,021. 2,341. 2,578.

Double file Desk height 147/8� 18� 265/8� MD6-S0B2F( )-( ) 1,368. 1,368. 1,435. 1,725. 1,916.147/8� 24� 265/8� MD6-D0B2F( )-( ) 1,553. 1,553. 1,629. 1,898. 2,094.147/8� 30� 265/8� MD6-E0B2F( )-( ) 1,738. 1,738. 1,825. 2,077. 2,267.

Order Code

Example: MD6-D2B1F-612-612

MD6 PedestalD Deep2B1F Configuration612 Paint finish for case612 Veneer/paint finish for

drawer fronts


Specify finishes for case and front.

All drawer pulls are matte black.

All pedestals are equipped withlocks. Order pedestal locks with aKnollKey order form.

Application Notes

18�D pedestals may be used underany Morrison worksurface. 24�Dpedestals can be used under 30�and 36�D worksurfaces, withoutobstructing wire managementthrough worksurface grommets.

24�D pedestals may also beinstalled under 24�D surfaceswithout grommets; 30�D pedestalsmay be used only under 30�Dsurfaces without grommets.

Pedestals are bolted into either endof any worksurface over 30�W.Insert locations and caseconstruction permit use of pedestalsas worksurface support, with orwithout universal desk end panels.

One box drawer divider is includedwith each 2 box, 1 file and 1 box, 1file pedestal. Drawers accept up to 7dividers, or 6 stationery insert trays.

All file drawers accommodate letterwidth filing front-to-back. 18�D filedrawers accommodate legal filesside-to-side. 24� and 30�D filedrawer pedestals include one filesupport for legal filing, side-to-side.

Order file supports separately toequip other drawer in 24� or 30�deep 2 file.

Morrison

166

Double-width floorstanding pedestals and cabinetsNetwork Double Wide


Double-wide, 2 file 30�W 293/4� 18� 265/8� MD6-W0B2F-( )-( ) $2,454. $2,454. $2,575. $3,103. $3,550.36�W 353/4� 18� 265/8� MD6-X0B2F-( )-( ) 3,080. 3,080. 3,234. 3,932. 4,414.

Double door cabinet 30�W 293/4� 18� 265/8� MD4-WDD30-( )-( ) 2,141. 2,141. 2,246. 2,837. 3,306.

Letter filing kits 30�W 27� – 9� MD6-WDK 516.36�W 33� – 9� MD6-XDK 516.

Vertical dividers Set of 10 MD6-VP 202.

Order Code

Example: MD6-W0B2F-612-612

MD6 PedestalW 2 file, double width0B2F Configuration612 Paint finish for case612 Veneer/paint finish for

fronts





Application Notes

Double-wide pedestals can be usedunder 18�, 24�, 30� and 36�Dworksurfaces.

2-file pedestals allow legal filingside-to-side or front-to-back.Double door cabinet includes oneadjustable shelf.

30�W pedestals are bolted intoeither end of any worksurface, 30�Wor more. Insert locations and caseconstruction permit use of pedestalsas worksurface support, with orwithout universal desk end panels.

Weight distribution limitationspreclude using only double-widthpedestals and worksurfaces tocreate freestanding credenzas.

Letter filing partition kits include 2vertical dividers and 2 movablebacks, to allow side-to-side letterwidth filing.

Morrison

167

Sto

rage

Double-width floorstanding pedestals and cabinetsOptions Double Wide


Double-wide, 2 file 30�W 30� 19� 267/8� MD7 DW30C( )( ) $2,063. $2,063. $2,164. $2,594. $2,974.36�W 36� 19� 267/8� MD7 DW36C( )( ) 2,619. 2,619. 2,745. 3,291. 3,699.

Double door cabinet 30�W 30� 19� 267/8� MD7 DC30C( )( ) 1,791. 1,791. 1,885. 2,307. 2,690.

Order Code

Example: MD7-DW30C-612-612

MD7 PedestalDW 2 file, double width30C Configuration612 Paint finish for case612 Veneer/paint finish for

fronts




Application Notes

Options double-wide pedestals canbe used under 18�, 24�, 30� and36�D worksurfaces in panelplanning applications only.

2-file pedestals allow legal filingside-to-side or front-to-back.Double door cabinet includes oneadjustable shelf.

Weight distribution limitationspreclude using only double-widthpedestals and worksurfaces tocreate freestanding credenzas.

Morrison

168

Mobile pedestals18�D


1 box, 1 file Machine or desk height 147/8� 18� 233/8� MD6-M1B1F-( )-( ) $2,114. $2,114. $2,216. $2,439. $2,606.

2 box, 1 file Freestanding 147/8� 18� 295/8� MD6-M2B1F-( )-( ) 2,586. 2,586. 2,713. 3,005. 3,259.

2 file Freestanding 147/8� 18� 295/8� MD6-M0B2F-( )-( ) 2,212. 2,212. 2,328. 2,569. 2,735.

Pencil tray 131/4� 57/8� 1� MD7-PT(C) 55.131/4� 57/8� 1� MD7-PT(N) 48.

Order Code

Example: MD6-M1B1F-612-612

MD6 PedestalM Mobile1B1F Configuration612 Painted finish for case612 Veneer/paint finish for

fronts




All pedestals are equipped withlocks.

Order locks with a KnollKey orderform.

Pencil tray is molded plastic andavailable in black or clear.Black: NClear: C

Application Notes

Mobile pedestals include top withfinger grip, locking casters, andcounter weight. One box, one filemobile pedestal will fit under anyMorrison worksurface at desk ormachine height.

Pencil tray must be orderedseparately.

2 box/file or 2 file mobile pedestalsare higher than standard deskheight worksurfaces.

One box drawer divider is includedwith each 2 box, 1 file and 1 box, 1file pedestal. Drawers accept up to 7dividers or 5 stationery insert trays.

Mobile pedestal handle attaches toeither height mobile pedestal top foreasier movement around a facility.Handle stores on top of pedestal andunfolds for use. Handle is orderedseparately.

Morrison

169

Sto

rage

Pedestal accessoriesMorrison Pedestals


Pencil tray 131/4� 57/8� 1� MD7-PT(C) $55.131/4� 57/8� 1� MD7-PT(N) 48.

Stationery inserts, set of four trays – – – MD6-ST 242.

Drawer divider Box MD6-BD 51.File MD6-FD 51.

File support (set of 2) MD6-FS 18.

Mobile pedestal handle MD6-PULL-( ) 235.

Order Code

Example: MD7-PT

MD7 PedestalPT Pencil tray


Application Notes

Pencil tray rests on any box drawerand is specified separately.

Stationery inserts are sloped traysfor 18�D box drawer.

Specify two sets of inserts for 24� or30�D box drawers.

Drawer dividers are sloped U-shapeinserts for box or file drawers.

Specify file support for side-to-sidefilling in 24� or 30� file drawers.

Mobile pedestal handle attaches toeither height mobile pedestal top foreasier movement around a facility.Handle stores on top of pedestal andunfolds for use.

Morrison

170

Intermediate shelvesDesigned by John Rizzi


Full width 60� 60� 10� 3/4� MM3-IS60F( ) $574.66� 66� 10� 3/4� MM3-IS66F( ) 652.72� 72� 10� 3/4� MM3-IS72F( ) 722.78� 78� 10� 3/4� MM3-IS78F( ) 829.

Returns 60� 60� 10� 3/4� MM3-IS60R( ) 504.66� 66� 10� 3/4� MM3-IS66R( ) 574.72� 72� 10� 3/4� MM3-IS72R( ) 652.78� 78� 10� 3/4� MM3-IS78R( ) 722.

Half round endpiece 11� 22� 3/4� MM3-ISE( ) 253.

Quarter round endpiece 10� 10� 3/4� MM3-ISX( ) 146.

Order Code

Example: MM3-IS72R-612

MM3 AccessoryIS Intermediate shelves72 WidthR Return612 Paint finish



Specify return shelves by numberthat corresponds to total returndimension (depth of desk and widthof return).

Application Notes

Intermediate shelves provide anadditional level of storage betweenthe worksurface and standardoverhead storage.

Intermediate shelves includebrackets for cantilever support fromvertical panel connector tracks.

Intermediate shelves may bemounted on 1� increments of heightup to 1� from top of panel.Recommended position is 6� - 7�above the worksurface.

Use full width shelves with backpanels of the same total width. Addreturns to form a continuous ‘‘L’’.Half-round endpiece joinsback-to-back shelves over ahalf-round conference worksurface.Quarter round terminates anintermediate shelf at a straightpanel connection.

Intermediate shelves cannot bemounted to freestanding desks oroverhead supports.

Use full width intermediate shelvesthat correspond with actualworkstation width.

Morrison

171

Sto

rage

Aluminum shelf

description w d h pattern no. list

Aluminum shelf with panel brackets 24� 8� 1� MM3-AS24-( ) $650.30� 8� 1� MM3-AS30-( ) 688.36� 8� 1� MM3-AS36-( ) 731.42� 8� 1� MM3-AS42-( ) 767.48� 8� 1� MM3-AS48-( ) 801.60� 8� 1� MM3-AS60-( ) 878.72� 8� 1� MM3-AS72-( ) 947.

Order Code

Example: MM3-AS48-613

MM3 AccessoryAS Aluminum Shelf48 Width613 Bracket finish


Specify shelf width and paint finishfor brackets.

Shelf is extruded aluminum with ananodized finish. Shelf end caps arepainted silver.

Application Notes

Aluminum display shelves providean additional level of storagebetween the worksurface andstandard overhead storage.

Aluminum display shelves includebrackets for support from verticalpanel connector tracks.

Shelves may be mounted on anycombination of vertical panels of thesame total width.

Shelves may extend 12� past themounting bracket on either side.

Morrison

172

Shelves and flush counter surfaces, 13/4�panel or wall mountedsteel bookshelves


Steel bookshelves 24� 13� 13/4� MS1-S2413-( ) $409.30� 13� 13/4� MS1-S3013-( ) 435.36� 13� 13/4� MS1-S3613-( ) 468.42� 13� 13/4� MS1-S4213-( ) 537.48� 13� 13/4� MS1-S4813-( ) 675.60� 13� 13/4� MS1-S6013-( ) 768.

Brackets Bookend (pair) – 13� 6� MB1-B13-( ) 124.Shelf auxiliary support – – – MB2-AUX-S-( ) 62.Tie clip, adjacent – – – MB1-TC-( ) 15.Undershelf (pair) – 13� 8� MB1-C13-( ) 124.

Shelf organizers, black (10) – – – MS1-SO 62.

Transaction shelf brackets (set of four) 1� 4� 6� MB2-TS-( ) 141.

Order Code

Example: MS1-S2413-612

MS1W Shelf24 Width13 Depth612 Surface finish


Specify paint finish for brackets andsteel shelves.

Application Notes

All steel bookshelves have holes forshelf organizers (do not add -H).

13�D shelves hold binders, booksand other reference material. Orderbrackets and shelf organizers, ifapplicable, separately.

13�D steel bookshelves come withholes for shelf organizers. Onlybookend-style brackets areapproved for use with steel shelves.

Standard 13� deep shelves doubleas flush counter surfaces. Specifyundershelf or transaction shelfbrackets for this application. Eachset supports a maximum span of48�. Shelves over 60�W requireMB2-AUX-S auxiliary supportbrackets.

All shelf brackets accept task lightfixtures with the exception of thetransaction shelf bracketsMB2-TS-( ). Adjacent bookend-styleshelf brackets require MB1-TC tieclip to secure full-width task light.

For wall mounting shelves see page180.

Desk mounted counter surfaces donot accept task lights.

Morrison

173

Sto

rage

Shelves and flush counter surfaces, 13/4�panel or wall mountedlaminate and veneer shelves

description w d h pattern no.

with holes(suffix-H)

lam V1 V2

withoutholes

lam V1 V2

Panel mounted shelves and flush countersurfaces

24� 13� 13/4� MS2-W2413-( ) $420. $650. $912. $397. $622. $888.30� 13� 13/4� MS2-W3013-( ) 460. 710. 1,008. 436. 690. 986.36� 13� 13/4� MS2-W3613-( ) 517. 830. 1,168. 492. 810. 1,143.42� 13� 13/4� MS2-W4213-( ) 579. 958. 1,360. 556. 937. 1,328.48� 13� 13/4� MS2-W4813-( ) 646. 1,057. 1,547. 620. 1,036. 1,523.60� 13� 13/4� MS2-W6013-( ) 706. 1,241. 1,766. 684. 1,219. 1,746.66� 13� 13/4� MS2-W6613-( ) 767. 1,365. 1,931. 741. 1,338. 1,905.72� 13� 13/4� MS2-W7213-( ) 826. 1,456. 2,053. 801. 1,428. 2,031.78� 13� 13/4� MS2-W7813-( ) 888. 1,584. 2,243. 865. 1,554. 2,213.84� 13� 13/4� MS2-W8413-( ) 950. 1,707. 2,433. 931. 1,683. 2,410.90� 13� 13/4� MS2-W9013-( ) 1,012. 1,828. 2,589. 989. 1,805. 2,573.

Order Code

Example: MS2-W4213-612-H

MS2W Shelf42 Width13 Depth612 Surface finishH With holes


Specify finish for shelves.

Application Notes

Note:Add H to pattern number for shelfholes that accept shelf organizers.


13�D steel bookshelves come withholes for shelf organizers. Onlybookend-style brackets areapproved for use with steel shelves.

Standard 13� deep shelves doubleas flush counter surfaces. Specifyundershelf or transaction shelfbrackets for this application. Eachset supports a maximum span of48�. Shelves over 60�W requireMB1-AUX-S auxiliary supportbrackets.

All shelf brackets accept task lightfixtures with the exception of thetransaction shelf bracketsMB2-TS-( ). Adjacent bookend-styleshelf brackets require MB1-TC tieclip to secure full-width task light.

For wall mounting shelves see page180.

Desk mounted counter surfaces donot accept task lights.

Morrison

174

Shelves and flush counter surfaces, 11/4�panel or wall mountedlaminate and veneer shelves


Shelves without holes 24� 13� 11/4� MS2-U2413( ) $283. $515. $752.30� 13� 11/4� MS2-U3013( ) 332. 550. 831.36� 13� 11/4� MS2-U3613( ) 394. 688. 982.42� 13� 11/4� MS2-U4213( ) 426. 770. 1,127.48� 13� 11/4� MS2-U4813( ) 484. 886. 1,302.60� 13� 11/4� MS2-U6013( ) 573. 1,014. 1,484.66� 13� 11/4� MS2-U6613( ) 619. 1,091. 1,594.72� 13� 11/4� MS2-U7213( ) 667. 1,172. 1,711.78� 13� 11/4� MS2-U7813( ) 706. 1,258. 1,826.84� 13� 11/4� MS2-U8413( ) 752. 1,327. 1,940.90� 13� 11/4� MS2-U9013( ) 797. 1,411. 2,055.

Shelves with holes 24� 13� 11/4� MS2-U2413( )H 312. 539. 774.30� 13� 11/4� MS2-U3013( )H 364. 573. 860.36� 13� 11/4� MS2-U3613( )H 419. 709. 1,006.42� 13� 11/4� MS2-U4213( )H 454. 797. 1,154.48� 13� 11/4� MS2-U4813( )H 505. 908. 1,321.60� 13� 11/4� MS2-U6013( )H 598. 1,038. 1,505.66� 13� 11/4� MS2-U6613( )H 640. 1,116. 1,617.72� 13� 11/4� MS2-U7213( )H 688. 1,203. 1,738.78� 13� 11/4� MS2-U7813( )H 730. 1,273. 1,848.84� 13� 11/4� MS2-U8413( )H 774. 1,359. 1,969.90� 13� 11/4� MS2-U9013( )H 819. 1,428. 2,079.

Order Code

Example: MS2-U-4213-612-H

MS2 ShelfU 11/4� thick42 Width13 Depth612 Surface finishH With holes


Specify finish.

Specify suffix H for shelf holes thataccept shelf organizers.

Application Notes

Panel mounted shelves arecantilevered from vertical panelconnector tracks with bookend orundershelf brackets. 11/4� shelvesmust be midspan supported every48�.


Bookend-style brackets keepmaterial upright when verticalpanels are not used at the ends ofshelves (brackets are shipped inpairs.)

Standard 13� deep shelves doubleas flush counter surfaces. Specifyundershelf brackets or desk-mountstanchions for this application.

For wall mounted shelves see page180.

All shelves accept task lights.Adjacent bookend-style shelvesrequire MB1-TC tie clip to securefull width task light.

Transaction shelf brackets supportpanel-mounted shelves withoutholes. Each set supports a maximumspan of 48�.

Morrison

175

Sto

rage

Shelves and flush counter surfaces, 11/4�panel or wall mountedshelf brackets


Brackets 11/4� shelf auxiliary support – – – MB1-UAUXS-( ) $62.Bookend (pair) – 13� 6� MB1-B13-( ) 124.Tie clip, adjacent shelves – – – MB1-TC( ) 15.Undershelf (pair), 11/4� – 13� 8� MB1-UC13-( ) 124.

Shelf organizers, black (10) – – – MS1-SO 62.

Transaction shelf brackets (set of four) 1� 4� 6� MB2-TS-( ) 141.

Order Code

Example: MB1-UAUXS-611

MB1-UAUXS

Shelf bracket

611 Finish

Application Notes

Panel mounted shelves arecantilevered from vertical panelconnector tracks with bookend orundershelf brackets. 11/4� shelvesmust be midspan supported every48�.


Bookend-style brackets keepmaterial upright when verticalpanels are not used at the ends ofshelves (brackets are shipped inpairs.)

Standard 13� deep shelves doubleas flush counter surfaces. Specifyundershelf brackets or desk-mountstanchions for this application.

For wall mounted shelves see page180.

All shelves accept task lights.Adjacent bookend-style shelvesrequire MB1-TC tie clip to securefull width task light.

Transaction shelf brackets supportpanel-mounted shelves withoutholes. Each set supports a maximumspan of 48�.

Morrison

176

Morrison overhead cabinetspanel mounted

description w d h pattern no. Paint V1 V2

Painted or veneer front, panel mounted - lock 30� 14� 173/4� MO8-30-( )-( )-N-L $1,261. $1,492. $1,674.36� 14� 173/4� MO8-36-( )-( )-N-L 1,453. 1,708. 1,891.42� 14� 173/4� MO8-42-( )-( )-N-L 1,680. 1,945. 2,143.48� 14� 173/4� MO8-48-( )-( )-N-L 1,868. 2,169. 2,387.60� 14� 173/4� MO8-60-( )-( )-N-L 2,252. 2,622. 2,922.

Painted or veneer front, panel mounted - No lock 30� 14� 173/4� MO8-30-( )-( )-N-N 1,145. 1,382. 1,564.36� 14� 173/4� MO8-36-( )-( )-N-N 1,342. 1,595. 1,779.42� 14� 173/4� MO8-42-( )-( )-N-N 1,560. 1,837. 2,032.48� 14� 173/4� MO8-48-( )-( )-N-N 1,752. 2,055. 2,281.60� 14� 173/4� MO8-60-( )-( )-N-N 2,132. 2,509. 2,813.

Vertical dividers (10) – – – MO7-VD-( ) 218.

Order Code

Example: MO8-60-612-612-N-N

MO8 Overhead cabinet60 Width612 Paint finish for case612 Surface finish for doorN Black pullsN No lock



Overhead cabinet door pulls arematte black.

Order overhead cabinet locks with aKnollKey order form.

Application Notes

Overhead cabinets are hung fromvertical panels with removablebrackets. Cabinet door recedeswithin cabinet to allow use of top ofoverhead for storage or lighting.

Interior shelves have slots forvertical dividers.

Order vertical dividers separately.

Morrison

177

Sto

rage

Task lights for panel or wall mounted storageMorrison shelves and overheads

description w d h pattern no. list price light light with dimmer

Task 30� 121/2� 21/4� ML5-F30-( ) $389. $498.36� 121/2� 21/4� ML5-F36-( ) 447. 556.42� 121/2� 21/4� ML5-F42-( ) 499. 613.48� 121/2� 21/4� ML5-F48-( ) 587. 693.60� 121/2� 21/4� ML5-F60-( ) 640. 752.66� 121/2� 21/4� ML5-F66-( ) 697. 806.72� 121/2� 21/4� ML5-F72-( ) 755. 860.

Wire managers (set of 10) – – – ML2-WM 183.

Order Code

Example: ML5-F48-612

ML5 LightingF Fixture type48 Width612 Paint finish


Insert suffix ‘‘D’’ for dimmer switchafter the F in pattern number.

For Chicago task lights, add CH topattern number and $45 list.

For New York task lights, add NY topattern number.

Application Notes

Task lights include standardfluorescent cool white lamp, 9�grounded cordset, prismatic lens,electronic ballast, and integralmounting brackets.

Task lights may be mounted to anyequal-width combination of shelvesor overheads; not for use withMorrison Options.

Lights with dimmer include two2-position rocker switches.

Morrison Network lighting is ULlisted. UL File E 182396. Can behardwired where required.

Cordsets on 30�-72� lights exit atcenter of fixture.

Morrison

178

Morrison Network overhead storagedesk mounted Morrison overheads


Stanchion mounted overhead cabinets Lock 30� 14� 173/4� MO8-N30( )( )NL $1,261. $1,492. $1,674.36� 14� 173/4� MO8-N36( )( )NL 1,453. 1,708. 1,891.42� 14� 173/4� MO8-N42( )( )NL 1,680. 1,945. 2,143.48� 14� 173/4� MO8-N48( )( )NL 1,868. 2,169. 2,387.60� 14� 173/4� MO8-N60( )( )NL 2,252. 2,622. 2,922.

No lock 30� 14� 173/4� MO8-N30( )( )NN 1,145. 1,382. 1,564.36� 14� 173/4� MO8-N36( )( )NN 1,342. 1,595. 1,779.42� 14� 173/4� MO8-N42( )( )NN 1,560. 1,837. 2,032.48� 14� 173/4� MO8-N48( )( )NN 1,752. 2,055. 2,281.60� 14� 173/4� MO8-N60( )( )NN 2,132. 2,509. 2,813.

Back for stanchion mounted overheads 30� 3/8� 173/4� MO7-NB30( ) 403.36� 3/8� 173/4� MO7-NB36( ) 431.42� 3/8� 173/4� MO7-NB42( ) 463.48� 3/8� 173/4� MO7-NB48( ) 487.60� 3/8� 173/4� MO7-NB60( ) 550.

Order Code

Example: MO8-N60-612-612-N-N

MO8 Overhead cabinetN Network mounted60 Width612 Paint finish for case612 Surface finish for doorN Black pullsN No lock


Specify finish for case and front.


Interior shelves have slots forvertical dividers. Order verticaldividers separately.

Desk mounted MO8 overheads alignwith 64�H panel and verticalstorage.

Overhead cabinet door pulls arematte black.

Application Notes

Stanchion mounted overheadcabinets attach to overheadsupports. Specify overhead backsseparately for finished appearancein back-to-back or exposedapplications.

Specify conversion kit MO7-SMBonly if converting panel hungoverheads to stanchion mounted.

Wall-mounting Morrison overheadcabinets: Use MO8-WMR to mountup to 120� of MO8 overheads.Specify one MO8-WMB for eachoverhead.

For Options overheads or Morrisonor Options shelves, useMO6-WMSK to wall mount up to 9�of shelves or overheads. Kitincludes wall mount rail and onevertical standard. Specify oneadditional MO6 WMSB for eachshelf or overhead. Morrison shelvesalso require MB1-B13 shelfbrackets.

Wall mount rails may be trimmed tolength.

Specify conversion kit MO7-PMBonly if converting stanchionmounted overheads to panel hung.

Wall mount wire manager istwo-part wire concealment kit,22�H.

Morrison

179

Sto

rage

Morrison Network overhead storagedesk or wall mounted Morrison overheads, shelf and overheadwall-mount kits


Conversion kit, mounting brackets for overheadsupports

MO7-SMB $74.

Vertical dividers (set of 10) MO7-VD( ) 218.

Morrison, Network overheadwall mount rail

120� 1� 31/2� MO8-WMR-( ) 485.

Morrison, Network overheadwall mount brackets (2)

– – – MO8-WMB-( ) 188.

Wall mounting kit for shelves andOptions overheads

111� 1� 2� MO6-WMSK-( ) 485.

Wall mounting vertical standardfor shelves and Options overheads

3/4� 1� 18� MO6-WMSB-( ) 129.

Conversion kits, panel mount - brackets foroverheads

– – – MO7-PMB-( ) 74.

Wall mount wire managers, set of 10 MWM-J 230.

Order Code

Example: MO8-N60-612-612-N-N

MO8 Overhead cabinetN Network mounted60 Width612 Paint finish for case612 Surface finish for doorN Surface finish for pullsN No lock


Specify paint finish for brackets.

Application Notes

Stanchion mounted overheadcabinets attach to overheadsupports. Specify overhead backsseparately for finished appearancein back-to-back or exposedapplications.

Specify conversion kit MO7-SMBonly if converting panel hungoverheads to stanchion mounted.

Wall-mounting Morrison overheadcabinets: Use MO8-WMR to mountup to 120� of MO8 overheads.Specify one MO8-WMB for eachoverhead.

For Options overheads or Morrisonor Options shelves, useMO6-WMSK to wall mount up to 9�of shelves or overheads. Kitincludes wall mount rail and onevertical standard. Specify oneadditional MO6 WMSB for eachshelf or overhead. Morrison shelvesalso require MB1-B13 shelfbrackets.


Specify conversion kit MO7-PMBonly if converting stanchionmounted overheads to panel hung.

Wall mount wire manager istwo-part wire concealment kit,22�H.

Morrison

180

Morrison Network overhead storageMorrison overhead supports


Overhead support for 13/4� worksurfaces 30� 29� 13� 17� MN2-S3017( ) $990.36� 35� 13� 17� MN2-S3617( ) 1,021.42� 41� 13� 17� MN2-S4217( ) 1,042.48� 47� 13� 17� MN2-S4817( ) 1,085.54� 53� 13� 17� MN2-S5417( ) 1,105.60� 59� 13� 17� MN2-S6017( ) 1,139.66� 65� 13� 17� MN2-S6617( ) 1,172.72� 71� 13� 17� MN2-S7217( ) 1,203.78� 77� 13� 17� MN2-S7817( ) 1,259.

Overhead support for 11/4� worksurfaces 30� 29� 13� 171/2� MN2-S3018( ) 990.36� 35� 13� 171/2� MN2-S3618( ) 1,021.42� 41� 13� 171/2� MN2-S4218( ) 1,042.48� 47� 13� 171/2� MN2-S4818( ) 1,085.54� 53� 13� 171/2� MN2-S5418( ) 1,105.60� 59� 13� 171/2� MN2-S6018( ) 1,139.66� 65� 13� 171/2� MN2-S6618( ) 1,172.72� 71� 13� 171/2� MN2-S7218( ) 1,203.78� 77� 13� 171/2� MN2-S7818( ) 1,259.

Order Code

Example: MN2-S7217-612

MN2 NetworkS Overhead support72 Width17 Height612 Paint finish



Application Notes

Overhead supports are bolted todesk supported worksurfaces withgrommets. Overheads may span overend of worksurface and width ofreturn worksurface if grommets anddesk support legs align withstanchions.

Overhead supports include 2stanchions with cover plates,mounting hardware, and fullplatform for overheads.

Overhead supports arepre-configured for the followingcombinations of overhead storageunits:Support Overheadwidth storage30� one 30�36� one 36�42� one 42�48� one 48�54� one 54�60� one 60� or two 30�66� one 30� and one 36�72� two 36�78� one 36� and one 42�

Stanchions may be equipped withdesktop power module (page 161)and stanchion outlets cover (page156).

Overhead supports are used onlywith Morrison overhead cabinets.For desk-mounted Reuteroverheads, specify stanchions (page192).

Morrison

181

Sto

rage

Overhead StorageTask Lights for Morrison Network


T5 Standard Task Light Use with 24� and wider overhead 18� 4� 11/2� MN2T5E19S $314.Use with 30� and wider overhead 25� 4� 11/2� MN2T5E25S 339.Use with 42� and wider overhead 37� 4� 11/2� MN2T5E37S 391.Use with 60� and wider overhead 49� 4� 11/2� MN2T5E49S 494.

T5 Advanced Task Light Use with 30� and wider overhead 25� 4� 11/2� MN2T5E25A 613.Use with 42� and wider overhead 37� 4� 11/2� MN2T5E37A 645.Use with 60� and wider overhead 49� 4� 11/2� MN2T5E49A 668.

Order Code

T5 Standard Task Light

Example: MN2T5E19S

MN2 Task LightT5 T5 lampE Electronic ballast25 WidthS Standard


T5 Task Lights:120v and includes T5 cool white(4100K) fluorescent lamp,electronic ballast, 9� groundedcordset, prismatic lens, rockerswitch, one cord exit managementclip and mounting hardware.Housings are black.

Application Notes

T5 Task Lights:Specify suffix -CH and add $45 listfor City of Chicago installations.Example: DL3T5E25S-CH

Cordset is center exit. On smallerunits cord exit is off-center, but stillnot handed.

T5 advanced task lights are fittedwith ballasts and lamps compliantwith LEED requirements, meetingthe LEED EB standard for mercurycontent.

Notes:All task lights mount into the recessin the underside of overheadcabinets and shelves at least 6�wider than task light width.

All task lights are TCLP compliantand meet requirements of CaliforniaTitle 20 and Title 24.

Morrison

182

Morrison Options overhead cabinets and shelvespanel or wall mounted


Overhead cabinet Lock 24� 13� 143/4� LO2-24-( )( )-L $849. $1,028. $1,151.30� 13� 143/4� LO2-30-( )( )-L 953. 1,151. 1,268.36� 13� 143/4� LO2-36-( )( )-L 1,051. 1,268. 1,386.42� 13� 143/4� LO2-42-( )( )-L 1,154. 1,386. 1,529.48� 13� 143/4� LO2-48-( )( )-L 1,259. 1,501. 1,666.60� 13� 143/4� LO2-60-( )( )-L 1,404. 1,721. 1,937.

No lock 24� 13� 143/4� LO2-24-( )( )-N 757. 935. 1,053.30� 13� 143/4� LO2-30-( )( )-N 850. 1,053. 1,171.36� 13� 143/4� LO2-36-( )( )-N 953. 1,171. 1,290.42� 13� 143/4� LO2-42-( )( )-N 1,053. 1,290. 1,434.48� 13� 143/4� LO2-48-( )( )-N 1,156. 1,412. 1,584.60� 13� 143/4� LO2-60-( )( )-N 1,309. 1,626. 1,839.

Vertical dividers (6) – – – LO2-VD-( ) 267.

Steel bookshelves 24� 13� 73/4� LS1-S2413-( ) 284.30� 13� 73/4� LS1-S3013-( ) 314.36� 13� 73/4� LS1-S3613-( ) 331.42� 13� 73/4� LS1-S4213-( ) 362.48� 13� 73/4� LS1-S4813-( ) 382.60� 13� 73/4� LS1-S6013-( ) 434.

Wall mounting kit for shelves andOptions overheads

111� 1� 2� MO6-WMSK-( ) 485.

Wall mounting vertical standardfor shelves and Options overheads

3/4� 1� 18� MO6-WMSB-( ) 129.

Order Code

Example: LO2-60-612-612-N

LO2 Overhead cabinet60 Width612 Paint finish for case612 Surface finish for doorN No lock



Application Notes

Overhead cabinets are hung fromvertical panels with integralbrackets. Cabinet door opens overthe top of the cabinet. Overheadcabinets cannot be used in Networkfreestanding applications.

Order vertical dividers separately.

13�D shelves hold binders, booksand other reference material.

Bookshelves consist of two steelside panels with integral brackets.

All shelves accept task lightfixtures.

For Options overheads or shelves,use MO6-WMSK to wall mount upto 9� of shelves or overheads. Kitincludes wall mount rail and onevertical standard. Specify oneadditional MO6 WMSB for eachshelf or overhead.


Morrison

183

Sto

rage

Morrison OptionsTask Lights


T5 Standard Task Light Use with 24� and wider overhead 19� 4� 11/2� LL2T5E19S $248.Use with 30� and wider overhead 25� 4� 11/2� LL2T5E25S 314.Use with 42� and wider overhead 37� 4� 11/2� LL2T5E37S 352.Use with 60� and wider overhead 49� 4� 11/2� LL2T5E49S 416.

T5 Advanced Task Light Use with 30� and wider overhead 25� 4� 11/2� LL2T5E25A 603.Use with 42� and wider overhead 37� 4� 11/2� LL2T5E37A 635.Use with 60� and wider overhead 49� 4� 11/2� LL2T5E49A 659.

Order Code


Example: LL2T5E19S

LL2 Task LightT5 T5 lampE Electronic ballast19 WidthS Standard



Application Notes






Morrison

184

Morrison Optionsoverhead brackets

description w d h pattern no. paint

Morrison Options overhead downmount bracketsand back panel (for Currents 64�H wall only)

24� AA1-LO24 DN( ) $329.30� AA1-LO30 DN( ) 339.36� AA1-LO36 DN( ) 347.42� AA1-LO42 DN( ) 358.48� AA1-LO48 DN( ) 366.

Order Code

Example: AA1-LO36 DN-612

AA1 Currents accessoryLO Overhead cabinet36 Case widthDN Downmount612 Paint finish


Specify paint finish for overheaddownmount kit.

Application Notes

Morrison Options overheaddownmount bracket kits includeback panel and brackets to suspendOptions overhead cabinets from64�H Currents service wall crown.

Morrison

185

Sto

rage

Reuter open shelfDesigned by Robert Reuter

description type w d h pattern no. black P1 P2 P3

Open shelf Morrison panel brackets 24� 13� 8� RS1-M24( ) $465. $465. $490.30� 13� 8� RS1-M30( ) 510. 510. 536.36� 13� 8� RS1-M36( ) 576. 576. 606.42� 13� 8� RS1-M42( ) 623. 623. 653.48� 13� 8� RS1-M48( ) 668. 668. 700.60� 13� 8� RS1-M60( ) 781. 781. 819.

Open shelf no mounting hardware 24� 13� 8� RS1-N24( ) 444. 444. 465.30� 13� 8� RS1-N30( ) 491. 491. 514.36� 13� 8� RS1-N36( ) 557. 557. 584.42� 13� 8� RS1-N42( ) 601. 601. 629.48� 13� 8� RS1-N48( ) 646. 646. 678.60� 13� 8� RS1-N60( ) 758. 758. 796.

Interior partitions Vertical, set of 5 – 12� 6� RS1-VP 122.

Horizontal, set of 10 6� 12� – RO1-HP6 202.9� 12� – RO1-HP9 253.12� 12� – RO1-HP12 301.15� 12� – RO1-HP15 351.

Order Code

Example: RS1-N48-612

RS1 Reuter shelfN No mounting hardware48 Width612 Finish


Specify paint finishes for shelf.

Application Notes

Interior partitions are black paintedsteel finish.

Reuter storage is a universalproduct applicable on Morrison orother Knoll systems.

Open shelves may be mounted onany combination of vertical panelsthe same width. Reuter openshelves may be Morrison Networkdesk-mounted, mounted on otherKnoll systems, cantilevered abovepanels, or wall-mounted. SpecifyReuter shelves with no mountinghardware, and brackets separately.

Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting threehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than shelf width. Availablein sets of 10; 6�, 9�, 12�, 15� widths.

Morrison

186

Reuter open overheadDesigned by Robert Reuter


Open overhead Morrison panel brackets 30� 13� 143/4� RO3-OM30( ) $758. $758. $796.36� 13� 143/4� RO3-OM36( ) 869. 869. 908.42� 13� 143/4� RO3-OM42( ) 980. 980. 1,030.48� 13� 143/4� RO3-OM48( ) 1,087. 1,087. 1,144.60� 13� 143/4� RO3-OM60( ) 1,269. 1,269. 1,330.72� 13� 143/4� RO3-OM72( ) 1,492. 1,492. 1,566.

Open overhead no mounting hardware 30� 13� 143/4� RO3-ON30( ) 737. 737. 771.36� 13� 143/4� RO3-ON36( ) 842. 842. 886.42� 13� 143/4� RO3-ON42( ) 958. 958. 1,006.48� 13� 143/4� RO3-ON48( ) 1,070. 1,070. 1,121.60� 13� 143/4� RO3-ON60( ) 1,245. 1,245. 1,309.72� 13� 143/4� RO3-ON72( ) 1,466. 1,466. 1,539.

Interior partitions Vertical, set of 5 – 11� 12� RO3-VP 131.

Horizontal, set of 10 6� 11� – RO1-HP6 202.9� 11� – RO1-HP9 253.12� 11� – RO1-HP12 301.15� 11� – RO1-HP15 351.

Door retrofit kit, with lock For open overhead 30� RO3-RD30( )L 514. 514. 543.36� RO3-RD36( )L 557. 557. 584.42� RO3-RD42( )L 651. 651. 681.48� RO3-RD48( )L 712. 712. 744.60� RO3-RD60( )L 1,085. 1,085. 1,142.72� RO3-RD72( )L 1,221. 1,221. 1,280.

Door retrofit kit, no lock For open overhead 30� RO3-RD30( )N 394. 394. 414.36� RO3-RD36( )N 456. 456. 478.42� RO3-RD42( )N 551. 551. 576.48� RO3-RD48( )N 609. 609. 638.60� RO3-RD60( )N 884. 884. 931.72� RO3-RD72( )N 1,021. 1,021. 1,075.

Order Code

Example: RO3-ON30-612

RO3-O Reuter open overheadN No mounting hardware30 Width612 Finish


Specify finish for case and door.

Application Notes

Interior partitions are black paintedsteel finish.

Door retrofit kits convert an openoverhead to an enclosed cabinet andinclude Reuter overhead door, leftand right arm mechanisms, and lockor lock plug.

Reuter storage is a universalproduct applicable on Morrison orother Knoll systems. Openoverheads may be mounted on anycombination of vertical panels thesame width or up to 12� less thanshelf width.

Reuter open overheads may bedesk-mounted, mounted on otherKnoll systems, cantilevered abovepanels, or wall-mounted. Specifyopen overhead with no mountinghardware and brackets separately.

Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting threehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than shelf width. Availablein sets of 10; 6�, 9�, 12�, 15� widths.

Morrison

187

Sto

rage

Reuter overhead cabinetMorrison panel mountedDesigned by Robert Reuter


Enclosed cabinet, with lock (Morrison panelbrackets) - One door

24� 141/4� 143/4� RO3-M24( )( )L $1,050. $1,050. $1,100.30� 141/4� 143/4� RO3-M30( )( )L 1,175. 1,175. 1,228.36� 141/4� 143/4� RO3-M36( )( )L 1,352. 1,352. 1,418.42� 141/4� 143/4� RO3-M42( )( )L 1,561. 1,561. 1,640.48� 141/4� 143/4� RO3-M48( )( )L 1,738. 1,738. 1,826.

Enclosed cabinet, with lock (Morrison panelbrackets) - Two doors

60� 141/4� 143/4� RO3-M60( )( )L 2,204. 2,204. 2,310.66� 141/4� 143/4� RO3-M66( )( )L 2,398. 2,398. 2,524.72� 141/4� 143/4� RO3-M72( )( )L 2,571. 2,571. 2,697.

Enclosed cabinet, no lock (Morrison panelbrackets) - One door

24� 141/4� 143/4� RO3-M24( )( )N 950. 950. 996.30� 141/4� 143/4� RO3-M30( )( )N 1,075. 1,075. 1,128.36� 141/4� 143/4� RO3-M36( )( )N 1,254. 1,254. 1,314.42� 141/4� 143/4� RO3-M42( )( )N 1,462. 1,462. 1,532.48� 141/4� 143/4� RO3-M48( )( )N 1,639. 1,639. 1,718.

Order Code

Example: RO3-M48-612-M-L

RO3 Reuter overhead cabinetM Morrison panel mounted48 Width612 Case finishM Front finishL With lock


First suffix is for case, second isdoor finish.

Specify finish for case and door:Interior partitions are black paintedsteel finish.

Application Notes

Reuter storage is a universalproduct applicable on Morrison orother Knoll systems. Overheadcabinets may be mounted on anycombination of vertical panels thesame width or up to 12� less thancabinet width. Cabinet door rotatesabove cabinet on side pivots,counterbalanced by two pneumaticcylinders. Two door cabinets havecenter divider and four pneumaticcylinders.

Reuter overheads may be mountedon other Knoll systems, cantileveredabove 42� or 56� Morrison panels, orwall-mounted.

Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting fivehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than cabinet width.Available in sets of 10; 6�, 9�, 12�,15� widths.

Ganging bracket (page 193) joinsadjacent overheads or shelves foradditional stiffness and alignment.

Order locks for overheads with aKnollKey order form. Please notethat Reuter overhead cabinets 60�Wor wider require two lock cores.

Reuter overhead doors without locksinclude black, Knoll-logo insert, inthe same position.

Insert may be removed to retrofit alock later.

Morrison

188

Reuter overhead cabinetMorrison panel mountedDesigned by Robert Reuter


Enclosed cabinet, no lock (Morrison panelbrackets) - Two doors

60� 141/4� 143/4� RO3-M60( )( )N $1,999. $1,999. $2,098.66� 141/4� 143/4� RO3-M66( )( )N 2,201. 2,201. 2,305.72� 141/4� 143/4� RO3-M72( )( )N 2,362. 2,362. 2,482.

Interior partitions Horizontal,set of 10

6� 11� – RO1-HP6 202.

Horizontal,set of 10

9� 11� – RO1-HP9 253.


12� 11� – RO1-HP12 301.


15� 11� – RO1-HP15 351.

Vertical,set of 5

– 11� 12� RO3-VP 131.

Order Code

Example: RO3-M48-612-M-L

RO3 Reuter overhead cabinetM Morrison panel mounted48 Width612 Case finishM Front finishL With lock


First suffix is for case, second isdoor finish.

Specify finish for case and door:Interior partitions are black paintedsteel finish.

Application Notes

Reuter storage is a universalproduct applicable on Morrison orother Knoll systems. Overheadcabinets may be mounted on anycombination of vertical panels thesame width or up to 12� less thancabinet width. Cabinet door rotatesabove cabinet on side pivots,counterbalanced by two pneumaticcylinders. Two door cabinets havecenter divider and four pneumaticcylinders.

Reuter overheads may be mountedon other Knoll systems, cantileveredabove 42� or 56� Morrison panels, orwall-mounted.

Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting fivehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than cabinet width.Available in sets of 10; 6�, 9�, 12�,15� widths.

Ganging bracket (page 193) joinsadjacent overheads or shelves foradditional stiffness and alignment.


Reuter overhead doors without locksinclude black, Knoll-logo insert, inthe same position.

Insert may be removed to retrofit alock later.

Morrison

189

Sto

rage

Reuter overhead cabinetdesk, wall, or other Knoll system mountedDesigned by Robert Reuter


Enclosed cabinet, with lock (no mountinghardware) - One door

24� 141/4� 143/4� RO3-N24( )( )L $1,030. $1,030. $1,079.30� 141/4� 143/4� RO3-N30( )( )L 1,145. 1,145. 1,208.36� 141/4� 143/4� RO3-N36( )( )L 1,324. 1,324. 1,394.42� 141/4� 143/4� RO3-N42( )( )L 1,538. 1,538. 1,618.48� 141/4� 143/4� RO3-N48( )( )L 1,718. 1,718. 1,802.

Enclosed cabinet, with lock (no mountinghardware) - Two doors

60� 141/4� 143/4� RO3-N60( )( )L 2,175. 2,175. 2,285.66� 141/4� 143/4� RO3-N66( )( )L 2,382. 2,382. 2,493.72� 141/4� 143/4� RO3-N72( )( )L 2,542. 2,542. 2,670.

Enclosed cabinet, no lock (no mountinghardware) - One door

24� 141/4� 143/4� RO3-N24( )( )N 924. 924. 969.30� 141/4� 143/4� RO3-N30( )( )N 1,049. 1,049. 1,099.36� 141/4� 143/4� RO3-N36( )( )N 1,226. 1,226. 1,286.42� 141/4� 143/4� RO3-N42( )( )N 1,440. 1,440. 1,510.48� 141/4� 143/4� RO3-N48( )( )N 1,615. 1,615. 1,698.

Enclosed cabinet, no lock (no mountinghardware) - Two doors

60� 141/4� 143/4� RO3-N60( )( )N 1,972. 1,972. 2,071.66� 141/4� 143/4� RO3-N66( )( )N 2,173. 2,173. 2,282.72� 141/4� 143/4� RO3-N72( )( )N 2,344. 2,344. 2,461.

Order Code

Example: RO3-N48-613-613-L

RO3 Reuter overhead cabinetN No brackets48 Width613 Case finish613 Front finishL With lock



Application Notes

Reuter storage is a universalproduct applicable on Knollsystems.

Cabinet door rotates above cabineton side pivots, counterbalanced bytwo pneumatic cylinders. Two-doorcabinets have center divider andfour pneumatic cylinders.Verticalinterior partitions may be positionedon 11/2� increments of widthanywhere across shelf, 11/2� in fromeach side. Vertical partitionscontain cutouts for mounting up tofive horizontal partitions at 2�increments on either or both sides.

Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than cabinet width.Available in sets of 10; 6�, 9�, 12�,15� widths.


Reuter overhead doors without locksinclude black, Knoll-logo insert, inthe same position. Insert may beremoved to retrofit a lock later.

Morrison

190

Reuter overhead cabinetdesk, wall, or other Knoll system mountedDesigned by Robert Reuter


Interior partitions Vertical,set of 5

– 11� 12� RO3-VP $131.


6� 11� – RO1-HP6 202.


9� 11� – RO1-HP9 253.


12� 11� – RO1-HP12 301.


15� 11� – RO1-HP15 351.

Order Code

Example: RO3-N48-613-613-L

RO3 Reuter overhead cabinetN No brackets48 Width613 Case finish613 Front finishL With lock



Application Notes

Reuter storage is a universalproduct applicable on Knollsystems.




Reuter overhead doors without locksinclude black, Knoll-logo insert, inthe same position. Insert may beremoved to retrofit a lock later.

Morrison

191

Sto

rage

Reuter overhead storagedesk and panel mounting optionsDesigned by Robert Reuter

description type w d h pattern no. black paint

Stanchions for Network desk mount, pair 11/4� worksurface 5� 5� 201/2� RO2-NS21( ) $698.13/4� worksurface 5� 5� 20� RO2-NS20( ) 698.

Stanchion outlets cover 11/4� worksurface 7� 1/2� 151/2� MN2SO21( ) 66.13/4� worksurface 7� 1/2� 15� MN2SO20( ) 66.

Panel mount brackets, pair, overhead cabinet For Dividends panels RO1-DPB 84.For Equity panels RO1-EPB 66.For Morrison panels RO1-MPB 66.For Reff System panels RO1-RPB 66.

Note : Reff System panels require 2 pair for 60�, 66� and 72� long Reuters.

Panel mount brackets, pair, open shelf For Dividends panels RS1-DPB 84.For Equity panels RS1-EPB 56.For Morrison panels RS1-MPB 56.For Reff / AutoStrada panels RS1-RPB 56.

Note : Reff System panels require 2 pair for 60�, 66� and 72� long Reuters.

Upmount brackets For Equity panels RO1-ECB( ) 145.For Morrison panels 1/2� 10� 10� RO1-CB( ) 145.For Reff / AutoStrada panels RO1-RCB( ) 145.

Order Code

Example: RO2-NS21-612

RO2 Reuter overheadNS Network stanchions21 Height612 Paint finish


Specify paint finish for stanchionsand upmount brackets.

Panel mount brackets are paintedblack finish.

Application Notes

Reuter overhead cabinets andshelves may be mounted on Networkdesks or other Knoll systems,upmounted, or wall-mounted. Usebracket kits on this page withReuter storage without mountinghardware.

For Morrison Network desk mountapplications, overhead cabinet orshelf width must correspond to desksupport width and worksurface withgrommet. Stanchions bolt to desksupport corner leg. Top of cabinet onstanchions aligns with adjacent64�H vertical panels or verticalstorage.

Specify 22�H privacy screens (to49�H) to enclose space betweenoverhead and desk.

Specify stanchion outlets coverwhen planning PDC modules and/orpower module in overhead support.See page for information on desktoppower module.

Upmount brackets support bottom ofReuter storage 1� or 2� above, orflush with top of correspondingwidth Morrison, Equity or Reffpanel.

Overhead storage may be centeredon, or mount to either side of Equitypost. Note that full 6� modular widthReuter storage is wider than Equitycenterline-width panel surrounds.

Morrison

192

Reuter overhead storagewall-mounting options and ADA pullDesigned by Robert Reuter

description type w d h pattern no. black

Wall mount frames, overhead cabinet 24� or 30�W overheads 23� 1/2� 13� RO1-WMF2 $127.36� or 42�W overheads 35� 1/2� 13� RO1-WMF3 137.48� or 60�W overheads 47� 1/2 13� RO1-WMF4 145.

Wall mount frames, shelf 24�W shelf 23� 11/2� 6� RS1-WMF24 127.30�W shelf 29� 11/2� 6� RS1-WMF30 133.36�W shelf 35� 11/2� 6� RS1-WMF36 137.42�W shelf 41� 11/2� 6� RS1-WMF42 143.48�W shelf 47� 11/2� 6� RS1-WMF48 145.60�W shelf 59� 11/2� 6� RS1-WMF60 153.

Wall mount wire manager, set of 10 MWM-J 230.

Ganging bracket RO1-GB 18.

ADA pull RO1-PULL 73.

Order Code

Example: RO1-GB

RO1 Reuter overheadGB Ganging bracket


Wall mount frames are paintedblack finish.

ADA pull is stainless steel.

Application Notes

Wall mount frames secure Reuteroverhead cabinet or shelf to wall(frame/wall mounting hardware isnot included). Frame is concealedbehind storage. Use twoRO1-WMF2 to wall-mount 66�- and72�-wide Reuter overheads.

Reuter open shelves 66� and 72�Ware for stanchion support only.

Wall mount wire manager istwo-part wire concealment kit, 22�H(medium grey only).

Ganging bracket joins adjacentReuter overheads or shelves foradditional stiffness and alignmentwhen storage is planned on only oneside of a panel run.

ADA pull mounts to Reuter paintedfront overhead door to allow seatedusers to close door easily. Specifyone for each cabinet 24� - 48�, twofor cabinets 60� - 72�.

ADA pull cannot be mounted onwood front Reuter doors.

Morrison

193

Sto

rage

Reuter flat front overhead cabinetflat frontDesigned by Robert Reuter

description w d h pattern no. P1/P2/P3 L V1 V2 V3

Enclosed cabinet (no mounting hardware) - Onedoor, no pull, no lock

30� 141/4� 143/4� RO3-A30NN ( )( )( )( ) n/a $1,524. $1,658. $1,733. $2,097.36� 141/4� 143/4� RO3-A36NN ( )( )( )( ) n/a 1,732. 1,924. 2,024. 2,583.42� 141/4� 143/4� RO3-A42NN ( )( )( )( ) n/a 1,966. 2,229. 2,382. 3,190.48� 141/4� 143/4� RO3-A48NN ( )( )( )( ) n/a 2,219. 2,414. 2,592. 3,701.

Enclosed cabinet (no mounting hardware) - Twodoors, no pull, no lock

60� 141/4� 143/4� RO3-A60NN ( )( )( )( ) n/a 2,956. 3,086. 3,246. 4,019.72� 141/4� 143/4� RO3-A72NN ( )( )( )( ) n/a 3,339. 3,579. 3,799. 4,984.

Enclosed cabinet (no mounting hardware) - Onedoor, no pull, with lock

30� 141/4� 143/4� RO3-A30NL ( )( )( )( ) 1,523. 1,621. 1,758. 1,830. 2,192.36� 141/4� 143/4� RO3-A36NL ( )( )( )( ) 1,704. 1,827. 2,020. 2,127. 2,679.42� 141/4� 143/4� RO3-A42NL ( )( )( )( ) 1,891. 2,065. 2,333. 2,478. 3,292.48� 141/4� 143/4� RO3-A48NL ( )( )( )( ) 2,203. 2,316. 2,514. 2,690. 3,799.

Enclosed cabinet (no mounting hardware) - Twodoors, no pull, with lock

60� 141/4� 143/4� RO3-A60NL ( )( )( )( ) 2,924. 3,151. 3,277. 3,441. 4,220.72� 141/4� 143/4� RO3-A72NL ( )( )( )( ) 3,307. 3,532. 3,777. 3,991. 5,178.

Order Code

Example: RO3-A30PL-117-V-H-Y316 AA

RO3 Reuter overheadA flat front30 widthP with pullL with lock117 case finishV front finish typeH front grain directionY316 front colorAA pull finish


Specify mounting hardwareseparately.

Optional anodized aluminum orpainted front pull trims the entirewidth of cabinet door.

Specify paint finishes for case. Finishtypes for front:L laminateP paintV veneer or techwood

Specify grain direction for veneerfronts.

Please refer to the AutoStrada pricelist for finishes available on ReuterFlat Front overhead cabinets fronts.

Application Notes

Reuter storage is a universalproduct applicable Knoll systems.




Morrison

194

Task Lights for Reuter Overhead Storage


T5 Standard Task Light Use with 24� and wider overhead 19� 4� 11/2� RTAT5E19S $327.Use with 30� and wider overhead 25� 4� 11/2� RTAT5E25S 349.Use with 42� and wider overhead 37� 4� 11/2� RTAT5E37S 379.Use with 60� and wider overhead 49� 4� 11/2� RTAT5E49S 409.Use with 66� and wider overhead 61� 4� 11/2� RTAT5E61S 436.

T5 Advanced Task Light Use with 30� and wider overhead 25� 4� 11/2� RTAT5E25A 604.Use with 42� and wider overhead 37� 4� 11/2� RTAT5E37A 636.Use with 60� and wider overhead 49� 4� 11/2� RTAT5E49A 659.Use with 66� and wider overhead 61� 4� 11/2� RTAT5E61A 687.

LED Task Light Use with 24� and wider overhead (24 LED’s) 17� 2� 1/2� ML4L17 608.Use with 36� and wider overhead (48 LED’s) 31� 2� 1/2� ML4L31 1,012.Use with 48� and wider overhead (72 LED’s) 44� 2� 1/2� ML4L44 1,321.Use with 66� and wider overhead (96 LED’s) 58� 2� 1/2� ML4L58 1,659.

Order Code


Example: RTAT5E25S

RTA Task LightT5 T5 lampE Electronic ballast25 WidthS StandardLED Task Light

Example: ML4L17ML4 Task LightL LED17 Width



LED Task Lights:Includes LED’s, power supply with9-12’ cord and mounting hardware.Housings are clear anodizedaluminum with white colorend-caps.

Application Notes






Morrison

195

Sto

rage

Morrison Network privacy screensback screens


Back of worksurface screens to 42�H 30� 3/4� 15� MZ1-B3015-( ) $330. $372. $382. $418. $469. $522.36� 3/4� 15� MZ1-B3615-( ) 397. 433. 443. 486. 534. 575.42� 3/4� 15� MZ1-B4215-( ) 486. 509. 524. 577. 629. 673.48� 3/4� 15� MZ1-B4815-( ) 546. 569. 586. 641. 720. 768.54� 3/4� 15� MZ1-B5415-( ) 637. 656. 675. 746. 814. 863.60� 3/4� 15� MZ1-B6015-( ) 703. 715. 741. 812. 905. 962.66� 3/4� 15� MZ1-B6615-( ) * 771. * * * *72� 3/4� 15� MZ1-B7215-( ) * 857. * * * *78� 3/4� 15� MZ1-B7815-( ) * 938. * * * *

Back of worksurface screens to overhead supportheight, 46�H

30� 3/4� 19� MZ1-B3019-( ) 419. 458. 469. 515. 565. 615.36� 3/4� 19� MZ1-B3619-( ) 518. 545. 559. 618. 657. 698.42� 3/4� 19� MZ1-B4219-( ) 613. 627. 640. 710. 784. 829.48� 3/4� 19� MZ1-B4819-( ) 696. 713. 730. 804. 929. 947.54� 3/4� 19� MZ1-B5419-( ) 794. 798. 826. 906. 973. 1,035.60� 3/4� 19� MZ1-B6019-( ) 857. 879. 905. 1,002. 1,063. 1,134.66� 3/4� 19� MZ1-B6619-( ) * 963. * * * *72� 3/4� 19� MZ1-B7219-( ) * 1,053. * * * *78� 3/4� 19� MZ1-B7819-( ) * 1,142. * * * *

Back of worksurface screens, to Reuter overheadsupport height, 49�H

30� 3/4� 22� MZ1-B3022-( ) 515. 540. 553. 615. 657. 703.36� 3/4� 22� MZ1-B3622-( ) 636. 656. 675. 743. 797. 826.42� 3/4� 22� MZ1-B4222-( ) 730. 743. 768. 844. 938. 982.48� 3/4� 22� MZ1-B4822-( ) 857. 858. 883. 976. 1,041. 1,135.54� 3/4� 22� MZ1-B5422-( ) 939. 941. 976. 1,081. 1,149. 1,212.60� 3/4� 22� MZ1-B6022-( ) 1,002. 1,049. 1,081. 1,190. 1,261. 1,306.66� 3/4� 22� MZ1-B6622-( ) * 1,165. * * * *72� 3/4� 22� MZ1-B7222-( ) * 1,249. * * * *78� 3/4� 22� MZ1-B7822-( ) * 1,345. * * * *

Order Code

Example: MZ1-B6619-15-W210/20

MZ1 Morrison Networkprivacy screen

B Back of worksurface66 Width19 Height15 Surface type and group




Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.

* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.

Application Notes

Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 42�, 46�or 49�.

Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.

Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.

VDT worksurfaces will accept backscreens on only one back edge.

Back screens may not be used at theend of a straight worksurface; useend screens in this application.

Privacy screens are not available ina combination of fabrics.

Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 36� screens for a72� surface.

Between back-to-back straight orVDT worksurfaces specify asingle3/4� back screen. This allowsback-to-back 235/8�D or 295/8�Dworksurfaces to plan on a precise 6�module.

15� high screens are used for a 42�horizon.

19�H screens are used to fill inspace between worksurface andMorrison overhead.

22�H screens fill the space betweenworksurface and Reuter overhead.

All but shared end screens start atthe bottom of the worksurface.

Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.

For replacement screen stiffenerssee Accessories page.

Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.

Morrison

196

Morrison Network privacy screensVDT screens


Back of VDT screens To 42�H 355/8� 3/4� 15� MZ1-V3615-( ) $397. $433. $443. $469. $522. $575.415/8� 3/4� 15� MZ1-V4215-( ) 486. 509. 524. 565. 615. 673.475/8� 3/4� 15� MZ1-V4815-( ) 546. 569. 586. 629. 698. 768.595/8� 3/4� 15� MZ1-V6015-( ) 693. 720. 743. 795. 878. 951.715/8� 3/4� 15� MZ1-V7215-( ) * 865. * * * *

To 46�H 355/8� 3/4� 19� MZ1-V3619-( ) 523. 542. 559. 595. 638. 698.415/8� 3/4� 19� MZ1-V4219-( ) 613. 627. 640. 685. 768. 829.475/8� 3/4� 19� MZ1-V4819-( ) 696. 715. 741. 788. 858. 947.595/8� 3/4� 19� MZ1-V6019-( ) 875. 903. 937. 1,014. 1,124. 1,216.715/8� 3/4� 19� MZ1-V7219-( ) * 1,091. * * * *

To 49�H 355/8� 3/4� 22� MZ1-V3622-( ) 636. 656. 675. 722. 768. 826.415/8� 3/4� 22� MZ1-V4222-( ) 730. 743. 768. 804. 918. 982.475/8� 3/4� 22� MZ1-V4822-( ) 857. 860. 885. 941. 947. 1,135.595/8� 3/4� 22� MZ1-V6022-( ) 1,013. 1,052. 1,085. 1,181. 1,301. 1,412.715/8� 3/4� 22� MZ1-V7222-( ) * 1,261. * * * *

Order Code

Example: MZ1-V4822-15-W210/20


V VDT48 Width22 Height15 Surface type and group




VDT worksurfaces will not acceptback screens on both back edges.Use VDT screens on at least oneback edge.

VDT screens are not in pairs;specify one for each back edge orone VDT screen and one backscreen.

* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.

Application Notes

Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.


19�H screens are used to fill inspace between worksurface anddesk mounted Morrison Networkoverheads.

22�H screens fill the space betweenworksurface and desk mountedReuter overheads.


* Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.

Morrison

197

Sto

rage

Morrison Network privacy screensend screens


End screens for outside application To 42�H 24� 3/4� 15� MZ1-E2415-W/U-( ) $314. $359. $369. $386. $446. $509.30� 3/4� 15� MZ1-E3015-W/U-( ) 351. 383. 397. 427. 477. 542.

To 46�H 24� 3/4� 19� MZ1-E2419-W/U-( ) 381. 415. 419. 461. 509. 570.30� 3/4� 19� MZ1-E3019-W/U-( ) 439. 476. 486. 522. 570. 636.

To 49�H 24� 3/4� 22� MZ1-E2422-W/U-( ) 446. 474. 483. 518. 573. 634.30� 3/4� 22� MZ1-E3022-W/U-( ) 534. 565. 574. 618. 669. 729.

End screens for shared application To 42�H 24� 3/4� 13� MZ1-S2415-W/U-( ) 303. 345. 357. 373. 433. 487.30� 3/4� 13� MZ1-S3015-W/U-( ) 330. 372. 382. 411. 460. 522.

To 46�H 24� 3/4� 17� MZ1-S2419-W/U-( ) 364. 397. 411. 438. 487. 550.30� 3/4� 17� MZ1-S3019-W/U-( ) 419. 458. 469. 501. 550. 615.

To 49�H 24� 3/4� 20� MZ1-S2422-W/U-( ) 427. 456. 463. 499. 551. 613.30� 3/4� 20� MZ1-S3022-W/U-( ) 515. 540. 553. 595. 638. 703.

Order Code

Example: MZ1-S3019W15-W210/20


S Shared30 Width19 HeightW For 13/4� worksurface15 Surface type and group




End screens specify:W- For use with 13/4� thick

worksurfacesU- For use with 11/4� thick

worksurfaces

* Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.

End screens must be used at theend of straight or rounded endworksurfaces.

End screens for outside applicationcover the end of the worksurfaceand align with adjacent backscreens.

End screens for shared applicationbegin above the worksurface toallow modular planning whenstraight worksurfaces areend-to-end.

When specifying end screens under64�H panel mounted MorrisonNetwork overheads with task lights,only screens to 42�H will fit.

With 64�H panel-mounted Reuteroverheads any screen up to 49�Hmay be planned perpendicular tostorage.

Application Notes

Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.


19�H screens are used to fill inspace between worksurface anddesk mounted Morrison Networkoverheads.

22�H screens fill the space betweenworksurface and desk mountedReuter overheads.

All but shared end screens start atthe bottom of the worksurface.


Morrison

198

Kiosk vertical storagefreestanding

description type w d h pattern no. Black Paint

Options Kiosk 4 files/coats 24� 24� 64� LV4-S64(L/R)-( )( ) $5,881.Cupola 24� 24� 41/2� MV2-STC( ) 882.Extended depth cupola 24� 261/4� 41/2� MV1-STCX( ) 882.Extended depth flat top cap 24� 261/4� 1� MV1-SFCX( ) 379.Flat top cap 24� 24� 1� MV1-SFC( ) 379.

Standard 24�W x 24�D 4 files/coats (front access) 24� 24� 56� MV4-S56F-(L/R)-( ) 9,537.4 files/coats (front access) 24� 24� 64� MV4-S64F-(L/R)-( ) 10,067.Cupola 24� 24� 41/2� MV2-STC( ) 882.Extended depth cupola 24� 261/4� 41/2� MV1-STCX( ) 882.Extended depth flat top cap 24� 261/4� 1� MV1-SFCX( ) 379.Flat top cap 24� 24� 1� MV1-SFC( ) 379.Top cabinet (side access) 24� 24� 18� MV2-S18S-(L/R)-( ) 2,387.

Deep 24�W x 30�D 4 files/coats (front access) 24� 30� 56� MV4-D56F-(L/R)-( ) 9,802.4 files/coats (front access) 24� 30� 64� MV4-D64F-(L/R)-( ) 10,326.Cupola 24� 30� 41/2� MV1-DTC( ) 1,010.Extended depth cupola 24� 321/4� 41/2� MV1-DTCX( ) 1,010.Extended depth flat top cap 24� 321/4� 1� MV1-DFCX( ) 502.Flat top cap 24� 30� 1� MV1-DFC( ) 502.Top cabinet (side access) 24� 30� 18� MV2-D18S-(L/R)-( ) 2,445.

Back panel for Kiosk 24� 2� 56� MV1-BP5624( ) 1,643.24� 2� 64� MV1-BP6424( ) 1,693.

Adjustable shelf kit (3 shelves) Deep 9� 24� 1� MV1-DAS 706.Standard 9� 18� 1� MV1-SAS 706.

File support (set of 2) MD6-FS 18.

Order Code

Example: MV3-D64F-R612

MV3 Vertical storageD 30� deep64 HeightF Front accessR Right door hinge612 Case and front finish


Specify Melamine finishes for sides,top, and back of Options Kiosk.

Options Kiosk fronts may bespecified in any standard Morrisonpainted finish. Sides, top and backare available in melamine only.

Melamine finishes:128 Fog119 Pumice114 Folkstone Grey

Kiosk storage is available in fullpainted finishes only.S- 24�W x 24�DD- 24�W x 30�DL- Hinged door for coats

(shelves) on leftR- Hinged door for coats

(shelves) on right

All kiosks have KnollKey lock fordoor, and internal sliding lockswitch for files.

Application Notes

Options Kiosks are freestandingwood construction vertical storagewith four Morrison file drawers,hinged door cabinet, and coatstorage with door. Options Kioskshave painted fronts and melaminesides, back and interior. Themelamine top is finished, with lockcams and a few pilot holes visible.

Kiosks are identical to Optionskiosks but painted on all surfaces.

64�H Kiosks include cabinet withhinged door over the file drawers.

18�H top cabinet attaches to 56�HKiosk to create 74�H storage unit.Top cabinet includes front accesshinged door storage over the coatstorage and open shelves accessiblefrom the sides.

File supports for kiosk drawers mustbe ordered separately.

Flat top caps may be specifiedseparately to coordinate withMorrison panel top caps;vault-shaped cupolas may also beused to prevent storage above kiosk.

Kiosk back panels and extendeddepth top caps or cupolas are usedwith adjacent vertical panels.

Back panel is notched to connect topanel with brackets and trimincluded.

Specify straight connector tracksame height as vertical panel, andhi/low top cap for postconfigurations, in width of adjacentpanel.

Morrison

199

Sto

rage

Accessories

description type w d h pattern no. list price L V1 V2

Pencil drawer 141/2� 15� 11/4� MM1-PD-( ) $366.

Coathooks (10) – – – MM2-CH 110.

Pencil tray 131/4� 57/8� 1� MD7-PT(C) 55.131/4� 57/8� 1� MD7-PT(N) 48.

Stationery inserts – – – MD6-ST 242.

Stabilizer foot 2� 13� 14� MM1-SF-( ) 417.

Carpet grips (10) Panel – – – MM2-CG 33.Pedestal or desk support – – – MM2-NCG 32.

Worksurface insert package Package of 10 MM1-IN10 3.Package of 100 MM1-IN100 53.

Replacement grommets (10) Thin surface 3� 3� 11/4� MM1UG 150.Thick surface 3� 3� 13/4� MM1WG 150.

Privacy screen alignment clips, set of 10 Corner MZ1-LS 51.Straight MZ1-SS 51.

Desk-to-desk cable sleeves (10) MN2-CS 65.

Wire managers (set of 10) – – – ML2-WM 183.

Sample Worksurface Currents for Morrison 16� 16� 1� AWMSAMP1616 109. 139. 288.Morrison 16� 16� 11/4� MSAMP1616 121. 156. 322.

Order Code

Example: MM1-PD-612

MM1 AccessoryPD Height612 Medium grey


Specify paint finishes.


Stabilizer foot attaches to connectortrack to stabilize panel runs.

Carpet grips snap under panelglides to prevent panel runs fromsliding. Glide rotates in carpet gripto permit leveling.Coathooks engagebelow the top cap at any point onthe vertical panel.

Pencil drawer secures underneath aworksurface.

Morrison

200

Wall Mounting Suggestions The following information is provided only as a guide, and represents minimum recommendations only. Knoll does not accept responsibility for the attachment of any Knoll product to a Customer’s site wall. Wall specification/construction is the responsibility of the Customer and its structural engineer/architect. Failure to properly attach Knoll products to adequate wall structures can lead to property damage and/or personal injury.

You should consult your own structural engineers and/or architects and must not rely on the information provided herein.

It is the responsibility of the Customer and its structural engineers/architects to verify that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the Knoll products are intended to be mounted are designed appropriately to support the product weight, PLUS 3 lbs. per linear inch for each useable shelf length

NOTE: A cabinet’s top is considered a “useable shelf” and MUST be included in the calculation of the total load for an overhead cabinet.

It is the responsibility of the Customer and its structural engineer/architects to specify the fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc. to the supporting wall and to confirm that the installers have adhered to these specifications. For all local building standards and codes, and additional requirements (including, but not limited to, seismic conditions) the Customer should always consult local code agencies.

Wall Mounting of Knoll Products Morrison

201

NEW CONSTRUCTION

Cinder Block or Poured Concrete Masonry Wall

Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above

Wood Stud Wall, the studs being only Ceiling Height

Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above

Steel Stud Wall, the studs being only Ceiling Height

Stud Specification

Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width

The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above

Wood studs must be Grade #2, or better, 3 1/2" minimum width

Wood studs must be Grade #2, or better, 3 1/2" minimum width

Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width

Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width

Stud Centers

Metal and wood studs must be spaced at 16" c/c maximum

N/A Wood studs must be spaced at 16" c/c maximum

Wood studs must be spaced at 16"" c/c maximum"

Metal studs must be spaced at 16" c/c maximum

Metal studs must be spaced at 16" c/c maximum

Stud Height

Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above

Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above

Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above

Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above

Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above

Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*

Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.

Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)

Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"

In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.

Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.

Fasten the wood block to each stud using three screws at the ends of each block.

Replace the drywall and repair as desired.

Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"



Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.






Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.






Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.





*Graham Wall Hung Shelf

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket









Fasten the Knoll supplied wall cleat with...

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with

1-1/4" embedment, screwed directly into the masonry wall





EXISTING CONSTRUCTION

Wall Mounting of Knoll Products Morrison

202

pattern no. page

AA1 39E 77

AA1 48E 77

AA1 64E 77

AA1 RE 77

AA1 T06 77

AA1 T18 77

AA1 T24 77

AA1 T30 77

AA1 T36 77

AA1 T42 77

AA1 T48 77

AA1 T60 77

AA1 T72 77

AA1 TML2 77

AA1 TMP1 77

AA1 TMS2 77

AA1 TMT3 77

AA1 TMX4 77

AA1-LO24 DN 185

AA1-LO30 DN 185

AA1-LO36 DN 185

AA1-LO42 DN 185

AA1-LO48 DN 185

AC1-39E1 77

AC1-48E1 77

AC1-64E1 77

AWM1 S36 135

AWM1 S42 135

AWM1 S48 135

AWM1 S60 135

AWM1 S66 135

AWM1 S72 135

AWM1 S78 135

AWM1 S84 135

AWM2 C3660 S 133

AWM2 C3672 S 133

AWM2 C4242 D 131

AWM2 C4242 L 131

AWM2 C4242 R 131

AWM2 C4242 S 131

AWM2 C4260 L 133

AWM2 C4260 R 133

AWM2 C4260 S 133

AWM2 C4272 L 133

AWM2 C4272 R 133

AWM2 C4272 S 133

AWM2 C4848 D 131

AWM2 C4848 L 131

AWM2 C4848 R 131

AWM2 C4848 S 131

AWM2 C4860 D 133

AWM2 C4860 L 133

AWM2 C4860 R 133

AWM2 C4860 S 133

AWM2 C4872 D 133

AWM2 C4872 L 133

AWM2 C4872 R 133

AWM2 C4872 S 133

AWM2 C4884 D 133

AWM2 C4884 L 133

AWM2 C4884 R 133

pattern no. page

AWM2 C4884 S 133

AWM2 C6036 S 132

AWM2 C6042 L 132

AWM2 C6042 R 132

AWM2 C6042 S 132

AWM2 C6048 D 132

AWM2 C6048 L 132

AWM2 C6048 R 132

AWM2 C6048 S 132

AWM2 C6060 D 131

AWM2 C6060 L 131

AWM2 C6060 R 131

AWM2 C6060 S 131

AWM2 C7236 S 132

AWM2 C7242 L 132

AWM2 C7242 R 132

AWM2 C7242 S 132

AWM2 C7248 D 132

AWM2 C7248 L 132

AWM2 C7248 R 132

AWM2 C7248 S 132

AWM2 C8448 D 132

AWM2 C8448 L 132

AWM2 C8448 R 132

AWM2 C8448 S 132

AWM2 F2424 130

AWM2 F3024 130

AWM2 F3030 130

AWM2 F3624 130

AWM2 F3630 130

AWM2 F4224 130

AWM2 F4230 130

AWM2 F4824 130

AWM2 F4830 130

AWM2 F5424 130

AWM2 F5430 130

AWM2 F6024 130

AWM2 F6030 130

AWM2 F6624 130

AWM2 F6630 130

AWM2 F7224 130

AWM2 F7230 130

AWM2 F7824 130

AWM2 F7830 130

AWM2 F8424 130

AWM2 F8430 130

AWM2 F9024 130

AWM2 F9030 130

AWM2 F9624 130

AWM2 F9630 130

AWM2 P4875 S 134

AWM2 P4887 S 134

AWM2 P7548 S 134

AWM2 P8748 S 134

AWMSAMP1616 200

AY1 CS 85, 87

AY1 ML16 85

AY1 ML25 85

AY1 MP16 85

AY1 MP25 85

AY1 MT16 85

pattern no. page

AY1 MT25 85

AY1 MX16 85

AY1 MX25 85

AY1 SML16 87

AY1 SMP16 87

AY1 SMT16 87

AY1 SMX16 87

AY1-1618M-A 82

AY1-1618M-W 83

AY1-1618S-A 82

AY1-1618S-W 83

AY1-1624M 84

AY1-1624M-A 82

AY1-1624M-W 83

AY1-1624S 84

AY1-1624S-A 82

AY1-1624S-W 83

AY1-1630M 84

AY1-1630M-A 82

AY1-1630M-W 83

AY1-1630S 84

AY1-1630S-A 82

AY1-1630S-W 83

AY1-1636M 84

AY1-1636M-A 82

AY1-1636M-W 83

AY1-1636S 84

AY1-1636S-A 82

AY1-1636S-W 83

AY1-1642M 84

AY1-1642M-A 82

AY1-1642M-W 83

AY1-1642S 84

AY1-1642S-A 82

AY1-1642S-W 83

AY1-1648M 84

AY1-1648M-A 82

AY1-1648M-W 83

AY1-1648S 84

AY1-1648S-A 82

AY1-1648S-W 83

AY1-1660M 84

AY1-1660M-A 82

AY1-1660M-W 83

AY1-1660S 84

AY1-1660S-A 82

AY1-1660S-W 83

AY1-2518M-A 82

AY1-2518M-W 83

AY1-2524M 84

AY1-2524M-A 82

AY1-2524M-W 83

AY1-2530M 84

AY1-2530M-A 82

AY1-2530M-W 83

AY1-2536M 84

AY1-2536M-A 82

AY1-2536M-W 83

AY1-2542M 84

AY1-2542M-A 82

AY1-2542M-W 83

pattern no. page

AY1-2548M 84

AY1-2548M-A 82

AY1-2548M-W 83

AY1-2560M 84

AY1-2560M-A 82

AY1-2560M-W 83

AY1-CE 85, 87

AY1-DMK 42, 43

AY1-HLA 87

AY1-MMK 86

AY1-SMK 87

LL2T5E19S 184

LL2T5E25A 184

LL2T5E25S 184

LL2T5E37A 184

LL2T5E37S 184

LL2T5E49A 184

LL2T5E49S 184

LO2-24 183

LO2-30 183

LO2-36 183

LO2-42 183

LO2-48 183

LO2-60 183

LO2-VD 183

LS1-S2413 183

LS1-S3013 183

LS1-S3613 183

LS1-S4213 183

LS1-S4813 183

LS1-S6013 183

LU1-C4242SS 125

LU1-C4848DD 125

LU1-C4848DS 125

LU1-C4848SD 125

LU1-C4848SS 125

LU1-C4860DS 125

LU1-C4860SD 125

LU1-C4860SS 125

LU1-C4872DS 125

LU1-C4872SD 125

LU1-C4872SS 125

LU1-C6048DS 125

LU1-C6048SD 125

LU1-C6048SS 125

LU1-C7248DS 125

LU1-C7248SD 125

LU1-C7248SS 125

LU1-D36S-B 128

LU1-D42S-B 128

LU1-D48S-B 128

LU1-M48S-BLL 129

LU1-M48S-BRL 129

LU1-R3050-B 126

LU1-R6330B 126

LU1-R7530B 126

LU1-S10818-A 120

LU1-S10818-B 120

LU1-S10824-A 121

LU1-S10824-B 121

LU1-S12018-A 120

Alpha-Numeric Index

203

pattern no. page

LU1-S12018-B 120

LU1-S12024-A 121

LU1-S12024-B 121

LU1-S2424-A 121

LU1-S2424-B 121

LU1-S3018-A 120

LU1-S3018-B 120

LU1-S3024-A 121

LU1-S3024-B 121

LU1-S3030-A 122

LU1-S3030-B 122

LU1-S3618-A 120

LU1-S3618-B 120

LU1-S3624-A 121

LU1-S3624-B 121

LU1-S3630-A 122

LU1-S3630-B 122

LU1-S4218-A 120

LU1-S4218-B 120

LU1-S4224-A 121

LU1-S4224-B 121

LU1-S4230-A 122

LU1-S4230-B 122

LU1-S4818-A 120

LU1-S4818-B 120

LU1-S4824-A 121

LU1-S4824-B 121

LU1-S4830-A 122

LU1-S4830-B 122

LU1-S5418-A 120

LU1-S5418-B 120

LU1-S5424-A 121

LU1-S5424-B 121

LU1-S5430-A 122

LU1-S5430-B 122

LU1-S6018-A 120

LU1-S6018-B 120

LU1-S6024-A 121

LU1-S6024-B 121

LU1-S6030-A 122

LU1-S6030-B 122

LU1-S6618-A 120

LU1-S6618-B 120

LU1-S6624-A 121

LU1-S6624-B 121

LU1-S6630-A 122

LU1-S6630-B 122

LU1-S7218-A 120

LU1-S7218-B 120

LU1-S7224-A 121

LU1-S7224-B 121

LU1-S7230-A 122

LU1-S7230-B 122

LU1-S7818-A 120

LU1-S7818-B 120

LU1-S7824-A 121

LU1-S7824-B 121

LU1-S7830-A 122

LU1-S7830-B 122

LU1-S8418-A 120

LU1-S8418-B 120

LU1-S8424-A 121

LU1-S8424-B 121

LU1-S8430-A 122

LU1-S8430-B 122

pattern no. page

LU1-S9018-A 120

LU1-S9018-B 120

LU1-S9024-A 121

LU1-S9024-B 121

LU1-S9030-A 122

LU1-S9030-B 122

LU1-S9618-A 120

LU1-S9618-B 120

LU1-S9624-A 121

LU1-S9624-B 121

LU1-S9630-A 122

LU1-S9630-B 122

LU1-T48A-L 123

LU1-T48A-R 123

LU1-T48B-L 123

LU1-T48B-R 123

LU1-T54A-L 123

LU1-T54A-R 123

LU1-T54B-L 123

LU1-T54B-R 123

LU1-T60A-L 123

LU1-T60A-R 123

LU1-T60B-L 123

LU1-T60B-R 123

LU1-T72A-L 123

LU1-T72A-R 123

LU1-T72B-L 123

LU1-T72B-R 123

LU1-V3618-A 124

LU1-V3624-A 124

LU1-V4224-A 124

LU1-V4230-A 124

LU1-V4824-A 124

LU1-V4830-A 124

LU1-W36AL 127

LU1-W36AR( ) 127

LU1-W36BL 127

LU1-W36BR 127

LU1-W42AL( ) 127

LU1-W42AR( ) 127

LU1-W42BL 127

LU1-W42BR 127

LU1-W48AL( ) 127

LU1-W48AR 127

LU1-W48BL 127

LU1-W48BR 127

LU1-Y36S-B 128

LU1-Y42S-B 128

LU1-Y48S-B 128

LU1-Y60S-B 128

LU1-YTS 128

LV4-S64(L/R) 199

M2-1*** 66, 67

M2-1**0 64

M2-1*0* 64

M2-1**0 65

M2-1*0* 65

M2-1060 60, 61

M2-1080 60, 61

M2-1*1* 66

M2-11** 66

M2-1*1* 67

M2-11** 67

M2-1*10 64

M2-11*0 64

pattern no. page

M2-1*10 65

M2-11*0 65

M2-111* 66, 67

M2-1600 62, 63

M2-1800 62, 63

M2-5*** 66, 67

M2-5**0 64

M2-5*0* 64

M2-5**0 65

M2-5*0* 65

M2-5030 60, 61

M2-5040 60, 61

M2-5080 60, 61

M2-5300 62, 63

M2-5400 62, 63

M2-5*5* 66

M2-55** 66

M2-5*5* 67

M2-55** 67

M2-5*50 64

M2-55*0 64

M2-5*50 65

M2-55*0 65

M2-555* 66, 67

M2-5800 62, 63

M2-6*** 66, 67

M2-6**0 64

M2-6*0* 64

M2-6**0 65

M2-6*0* 65

M2-6030 60, 61

M2-6040 60, 61

M2-6050 60, 61

M2-6080 60, 61

M2-6300 62, 63

M2-6400 62, 63

M2-6500 62, 63

M2-6*6* 66

M2-66** 66

M2-6*6* 67

M2-66** 67

M2-6*60 64

M2-66*0 64

M2-6*60 65

M2-66*0 65

M2-666* 66, 67

M2-6800 62, 63

M2-8*** 66, 67

M2-8**0 64

M2-8*0* 64

M2-8**0 65

M2-8*0* 65

M2-8030 60, 61

M2-8040 60, 61

M2-8090 60, 61

M2-8300 62, 63

M2-8400 62, 63

M2-8*8* 66

M2-88** 66

M2-8*8* 67

M2-88** 67

M2-8*80 64

M2-88*0 64

M2-8*80 65

M2-88*0 65

pattern no. page

M2-888* 66, 67

M2-8900 62, 63

M2-9030 60, 61

M2-9300 62, 63

M2-9303 64, 65

M2-9330 64, 65

M2-9333 66, 67

M2-9390 64, 65

M2-9393 66, 67

M2-9930 64, 65

M2-9933 66, 67

M2-9993 66, 67

MA1-CE 75

MA1-CI48 74

MA1-CI60 74

MA1-CI72 74

MA1-CL 75

MA1-CP 75

MA1-CS 75

MA1-CT 75

MA1-CX 75

MA1-F14C 73

MA1-F22C 73

MA1-F32C 73

MA1-F38C 73

MA1-F4200 72

MA1-F4240 72

MA1-F4244 72

MA1-F4288 72

MA1-F42C 73

MA1-F42F 73

MA1-F4800 72

MA1-F4840 72

MA1-F4844 72

MA1-F4888 72

MA1-F48C 73

MA1-F48F 73

MA1-F5600 72

MA1-F5640 72

MA1-F5644 72

MA1-F5688 72

MA1-F56C 73

MA1-F56F 73

MA1-F6400 72

MA1-F6440 72

MA1-F6444 72

MA1-F6488 72

MA1-F64C 73

MA1-F64F 73

MA1-F8000 72

MA1-F8040 72

MA1-F8044 72

MA1-F8088 72

MA1-F80C 73

MA1-F80F 73

MA1-H18 75

MA1-H24 75

MA1-H30 75

MA1-H36 75

MA1-H42 75

MA1-H48 75

MA1-H6 75

MA1-H60 75

MA1-HCS10 76

MA1-HCS14 76

Morrison

204

pattern no. page

MA1-HCS16 76

MA1-HCS18 76

MA1-HCS22 76

MA1-HCS26 76

MA1-HCS32 76

MA1-HCS6 76

MA1-HCS8 76

MA1-HCS9 76

MA1-HHL18 75

MA1-HHL24 75

MA1-HHL30 75

MA1-HHL36 75

MA1-HHL42 75

MA1-HHL48 75

MA1-HHL6 75

MA1-HHL60 75

MA1-PDC-T 98

MA1-TATT2 98

MA1-TATT3 98

MA1-V4206 72

MA1-V4806 72

MA1-V5606 72

MA1-V6406 72

MA1-V8006 72

MA1-VWM39 76

MA1-VWM42 76

MA1-VWM48 76

MA1-VWM56 76

MA1-VWM64 76

MA1-VWM80 76

MB1-AUX-C 148

MB1-AUX-DM 151

MB1-AUX-DW 151

MB1-B13 173, 176

MB1-C13 173

MB1-CB18M 149

MB1-CB18W 149

MB1-CB24M 149

MB1-CB24W 149

MB1-CB30M 149

MB1-CB30W 149

MB1-D 151

MB1-DB24 155

MB1-DB30 155

MB1-FV26-(L/R) 150

MB1-L1 151

MB1-NM-(L/R) 150

MB1-NW-(L/R) 150

MB1-SB18(L/R) 155

MB1-SB24(L/R) 155

MB1-SB30(L/R) 155

MB1-T18M 151

MB1-T18W 151

MB1-T24M 151

MB1-T24W 151

MB1-TC 173, 176

MB1-UAUXS 176

MB1-UC13 176

MB1-VP-1224M 149

MB1-VP-1224W 149

MB1-VP-1226M 149

MB1-VP-1226W 149

MB1-W20M-(L/R) 150

MB1-W20W-(L/R) 150

MB1-WS54 155

pattern no. page

MB1-WS60 155

MB1-WS66 155

MB1-WS72 155

MB2-AUX-S 173

MB2-C18M-(L/R) 148

MB2-C18W-(L/R) 148

MB2-C24M-(L/R) 148

MB2-C24W-(L/R) 148

MB2-C30M-(L/R) 148

MB2-C30W-(L/R) 148

MB2-RD3026-(L/R) 150

MB2-RD3626-(L/R) 150

MB2-RS2426-(L/R) 150

MB2-RS3026-(L/R 150

MB2-TS 173, 176

MB2-YM-(L/R) 148

MB2-YW-(L/R) 148

MB3-E18M 146

MB3-E18W 146

MB3-E24M 146

MB3-E24W 146

MB3-E30M 146

MB3-E30W 146

MB3-E36M 146

MB3-E36W 146

MB3-EC18M 146

MB3-EC18W 146

MB3-EC24M 146

MB3-EC24W 146

MB3-EC30M 146

MB3-EC30W 146

MB3-EV36M 146

MB3-EV36W 146

MB3-EV42M 146

MB3-EV42W 146

MB3-EV48M 146

MB3-EV48W 146

MB3-F18M 149, 155

MB3-F18W 149

MB3-F24M 149, 155

MB3-F24W 149

MB3-F30M 149, 155

MB3-F30W 149

MB3-V36M 146

MB3-V36W 147

MB3-V42M 146

MB3-V42W 147

MB3-V48M 146

MB3-V48W 147

MC1-30E1 54, 55

MC1-30L2 54, 55

MC1-30S1 54, 55

MC1-30T3 54, 55

MC1-30V2 56, 57

MC1-30X4 54, 55

MC1-30Y3 57

MC1-39E1 54, 55

MC1-39L2 54, 55

MC1-39S1 54, 55

MC1-39T3 54, 55

MC1-39V2 56, 57

MC1-39X4 54, 55

MC1-39Y3 57

MC1-42E1 54, 55

MC1-42L2 54, 55

pattern no. page

MC1-42S1 54, 55

MC1-42T3 54, 55

MC1-42V2 56, 57

MC1-42X4 54, 55

MC1-42Y3 57

MC1-48E1 54, 55

MC1-48L2 54, 55

MC1-48S1 54, 55

MC1-48T3 54, 55

MC1-48V2 56, 57

MC1-48X4 54, 55

MC1-48Y3 57

MC1-56E1 54, 55

MC1-56L2 54, 55

MC1-56S1 54, 55

MC1-56T3 54, 55

MC1-56V2 56, 57

MC1-56X4 54, 55

MC1-56Y3 57

MC1-64E1 54, 55

MC1-64H1 58, 59

MC1-64L2 54, 55

MC1-64S1 54, 55

MC1-64T3 54, 55

MC1-64V2 56, 57

MC1-64X4 54, 55

MC1-64Y3 57

MC1-80E1 54, 55

MC1-80L2 54, 55

MC1-80S1 54, 55

MC1-80T3 54, 55

MC1-80V2 56, 57

MC1-80X4 54, 55

MC1-80Y3 57

MC1-A09E1 50, 52

MC1-A09L2 50, 52

MC1-A09P1 50, 52

MC1-A09S1 50, 52

MC1-A09S2 51, 53

MC1-A09T3 50, 52

MC1-A09X4 50, 52

MC1-A16E1 50, 52

MC1-A16L2 50, 52

MC1-A16P1 50, 52

MC1-A16S1 50, 52

MC1-A16S2 51, 53

MC1-A16T3 50, 52

MC1-A16X4 50, 52

MC1-A18E1 50, 52

MC1-A18L2 50, 52

MC1-A18P1 50, 52

MC1-A18S1 50, 52

MC1-A18S2 51, 53

MC1-A18T3 50, 52

MC1-A18X4 50, 52

MC1-A22E1 50, 52

MC1-A22L2 50, 52

MC1-A22P1 50, 52

MC1-A22S1 50, 52

MC1-A22S2 51, 53

MC1-A22T3 50, 52

MC1-A22X4 50, 52

MC1-A32E1 50, 52

MC1-A32L2 50, 52

MC1-A32P1 50, 52

pattern no. page

MC1-A32S1 50, 52

MC1-A32S2 51, 53

MC1-A32T3 50, 52

MC1-A32X4 50, 52

MCE1CR24L 140

MCE1CR24N 140

MCE1CR24R 140

MCE1H4818 140

MCE1H4818P 140

MCE1H6024 140

MCE1H6024P 140

MCE1L3636SSN 137

MCE1L4242DSN 137

MCE1L4242SDN 137

MCE1L4242SSN 137

MCE1L4260SSN 138

MCE1L4266SSN 138

MCE1L4272SSN 138

MCE1L4278SSN 138

MCE1L4848DDN 137

MCE1L4848DSN 137

MCE1L4848SDN 137

MCE1L4848SSN 137

MCE1L4860DSN 138

MCE1L4860SDN 138

MCE1L4860SSN 138

MCE1L4866DSN 138

MCE1L4866SDN 138

MCE1L4866SSN 138

MCE1L4872DSN 138

MCE1L4872SDN 138

MCE1L4872SSN 138

MCE1L4878SSN 138

MCE1L4884SSN 138

MCE1L6042SSN 138

MCE1L6048DSN 138

MCE1L6048SDN 138

MCE1L6048SSN 138

MCE1L6642SSN 138

MCE1L6648DSN 138

MCE1L6648SDN 138

MCE1L6648SSN 138

MCE1L7242SSN 138

MCE1L7248DSN 138

MCE1L7248SDN 138

MCE1L7248SSN 138

MCE1L7842SSN 139

MCE1L7848SSN 139

MCE1L8448SSN 139

MCE1R1212G 140

MCE1R2424N 136

MCE1R2430N 136

MCE1R3024N 136

MCE1R3030N 136

MCE1R3624N 136

MCE1R3630N 136

MCE1R4224N 136

MCE1R4230N 136

MCE1R4824N 136

MCE1R4830N 136

MCE1R5424N 136

MCE1R5430N 136

MCE1R6024N 136

MCE1R6030N 136

MCE1R6624N 136

Morrison

205

pattern no. page

MCE1R6630N 136

MCE1R7224N 136

MCE1R7230N 136

MCE1R7824N 136

MCE1R7830N 136

MCE1R8424N 136

MCE1R8430N 136

MCE1R9024N 136

MCE1R9030N 136

MCE1R9624N 136

MCE1R9630N 136

MCE1W362430N 141

MCE1W363024N 141

MCE1W422430N 141

MCE1W423024N 141

MCE1W482430N 141

MCE1W483024N 141

MCE1W722430N 141

MCE1W723024N 141

MD4-WDD30 167

MD6-BD 170

MD6-D0B2F( ) 166

MD6-D2B1F( ) 166

MD6-E0B2F( ) 166

MD6-E2B1F( ) 166

MD6-FD 170

MD6-FS 170, 199

MD6-M0B2F 169

MD6-M1B1F 169

MD6-M2B1F 169

MD6-PULL 170

MD6-S0B2F( ) 166

MD6-S2B1F( ) 166

MD6-ST 170, 200

MD6-VP 167

MD6-W0B2F 167

MD6-WDK 167

MD6-X0B2F 167

MD6-XDK 167

MD7 DC30C 168

MD7 DW30C 168

MD7 DW36C 168

MD7-PT(C) 169, 170, 200

MD7-PT(N) 169, 170, 200

MHD-8036-(L/R)-(P/L/V) 43

MHD-8042-(L/R)-(P/L/V) 43

MK4-B3026-(P/V) 145

MK4-B3626-(P/V) 145

MK4-B4226-(P/V) 145

MK4-B4826-(P/V) 145

MK4-B6026-(P/V) 145

MK4-B6626-(P/V) 145

MK4-B7226-(P/V) 145

MK4-C2618-P/V 142

MK4-C2624-P/V 142

MK4-C2630-P/V 142

MK4-C2636-P/V 142

MK4-K6026-P/V 144

MK4-K6626-P/V 144

MK4-K7226-P/V 144

MK4-K7826-P/V 144

MK4-R3026-(P/V) 145

MK4-R3626-(P/V) 145

MK4-R4226-(P/V) 145

MK4-R4826-(P/V) 145

pattern no. page

MK4-R6026-(P/V) 145

MK4-R6626-(P/V) 145

MK4-R7226-(P/V) 145

MK4-T6026-P/V 144

MK4-T6626-P/V 144

MK4-T7226-P/V 144

MK4-T7826-P/V 144

MK4-U2618-P/V 142

MK4-U2624-P/V 142

MK4-U2630-P/V 142

MK4-U2636-P/V 142

MK4-V2636-P/V 143

MK4-V2642-P/V 143

MK4-X2636-P/V 143

MK4-X2642-P/V 143

ML1-HCWM24 92, 161

ML2-WM 178, 200

ML4L17 195

ML4L31 195

ML4L44 195

ML4L58 195

ML5-F30 178

ML5-F36 178

ML5-F42 178

ML5-F48 178

ML5-F60 178

ML5-F66 178

ML5-F72 178

MM1-CNP2 69

MM1-DSL2 42, 43

MM1-DSP1 42, 43

MM1-DSS1 42, 43

MM1-IN10 200

MM1-IN100 200

MM1-PD 200

MM1-PSL2 69

MM1-PSS1 69

MM1-SF 69, 200

MM1UG 200

MM1WG 200

MM1-WS30 68

MM1-WS39 68

MM1-WS42 68

MM1-WS48 68

MM1-WS56 68

MM1-WS64 68

MM1-WS80 68

MM2-CG 69, 200

MM2-CH 200

MM2-L26 108, 114, 115, 116, 119, 126, 129

MM2-NCG 200

MM3-AS24 172

MM3-AS30 172

MM3-AS36 172

MM3-AS42 172

MM3-AS48 172

MM3-AS60 172

MM3-AS72 172

MM3-IS60F 171

MM3-IS60R 171

MM3-IS66F 171

MM3-IS66R 171

MM3-IS72F 171

MM3-IS72R 171

MM3-IS78F 171

pattern no. page

MM3-IS78R 171

MM3-ISE 171

MM3-ISX 171

MN1-DP 155

MN2-CS 161, 165, 200

MN2-D0024 152

MN2-D0030 152

MN2-D0036 152

MN2-D0042 152

MN2-D0048 152

MN2-D0054 152

MN2-D0060 152

MN2-D0066 152

MN2-D0072 152

MN2-D0078 152

MN2-D2400 152

MN2-D3000 152

MN2-D3600 152

MN2-D3636 152

MN2-D4200 152

MN2-D4242 152

MN2-D4800 152

MN2-D4848 152

MN2-D5400 152

MN2-D6000 152

MN2-D6060 152

MN2-D6600 152

MN2-D7200 152

MN2-D7272 152

MN2-D7800 152

MN2-DD 155

MN2-E06 153

MN2-E09 153

MN2-E12 153

MN2-E18 153

MN2-E24 153

MN2-EW18 153

MN2-EW24 153

MN2-F24 154

MN2-F30 154

MN2-F36 154

MN2-F42 154

MN2-F48 154

MN2-F54 154

MN2-F60 154

MN2-F66 154

MN2-F72 154

MN2-F78 154

MN2-NS14 156

MN2-OF 97, 157

MN2-PMU 156

MN2-PMW 156

MN2-RDR 153, 155

MN2-RER 153

MN2-RSAK 153, 155

MN2-S3017 181

MN2-S3018 181

MN2-S3617 181

MN2-S3618 181

MN2-S4217 181

MN2-S4218 181

MN2-S4817 181

MN2-S4818 181

MN2-S5417 181

MN2-S5418 181

pattern no. page

MN2-S6017 181

MN2-S6018 181

MN2-S6617 181

MN2-S6618 181

MN2-S7217 181

MN2-S7218 181

MN2-S7817 181

MN2-S7818 181

MN2-SO20 157

MN2SO20 192

MN2-SO21 157

MN2SO21 192

MN2T5E19S 182

MN2T5E25A 182

MN2T5E25S 182

MN2T5E37A 182

MN2T5E37S 182

MN2T5E49A 182

MN2T5E49S 182

MO6-WMSB 180, 183

MO6-WMSK 180, 183

MO7-NB30 179

MO7-NB36 179

MO7-NB42 179

MO7-NB48 179

MO7-NB60 179

MO7-PMB 180

MO7-SMB 180

MO7-VD 177, 180

MO8-30 177

MO8-36 177

MO8-42 177

MO8-48 177

MO8-60 177

MO8-N30 179

MO8-N36 179

MO8-N42 179

MO8-N48 179

MO8-N60 179

MO8-WMB 180

MO8-WMR 180

MP2-3018 10, 12

MP2-3018-C/T 11

MP2-3018-N 10

MP2-3018-V 13

MP2-3024 10, 12

MP2-3024-C/T 11

MP2-3024-N 10

MP2-3024-V 13

MP2-3030 10, 12

MP2-3030-C/T 11

MP2-3030-N 10

MP2-3030-V 13

MP2-3036 10, 12

MP2-3036-C/T 11

MP2-3036-N 10

MP2-3036-V 13

MP2-3042 10, 12

MP2-3042-C/T 11

MP2-3042-N 10

MP2-3042-V 13

MP2-3048 10, 12

MP2-3048-C/T 11

MP2-3048-N 10

MP2-3048-V 13

Morrison

206

pattern no. page

MP2-3060 10

MP2-3060-N 10

MP2-3918 14, 16

MP2-3918-C/T 15

MP2-3918-N 14

MP2-3918-P 38

MP2-3918-V 17

MP2-3924 14, 16

MP2-3924-C/T 15

MP2-3924-N 14

MP2-3924-P 38

MP2-3924-V 17

MP2-3930 14, 16

MP2-3930-C/T 15

MP2-3930-N 14

MP2-3930-P 38

MP2-3930-V 17

MP2-3936 14, 16

MP2-3936-C/T 15

MP2-3936-N 14

MP2-3936-P 38

MP2-3936-V 17

MP2-3942 14, 16

MP2-3942-C/T 15

MP2-3942-N 14

MP2-3942-P 38

MP2-3942-V 17

MP2-3948 14, 16

MP2-3948-C/T 15

MP2-3948-N 14

MP2-3948-P 38

MP2-3948-V 17

MP2-3960 14

MP2-3960-N 14

MP2-4218 18, 20

MP2-4218-C/T 19

MP2-4218-N 18

MP2-4218-P 38

MP2-4218-V 21

MP2-4224 18, 20

MP2-4224-C/T 19

MP2-4224-N 18

MP2-4224-P 38

MP2-4224-V 21

MP2-4230 18, 20

MP2-4230-C/T 19

MP2-4230-N 18

MP2-4230-P 38

MP2-4230-V 21

MP2-4236 18, 20

MP2-4236-C/T 19

MP2-4236-N 18

MP2-4236-P 38

MP2-4236-V 21

MP2-4242 18, 20

MP2-4242-C/T 19

MP2-4242-N 18

MP2-4242-P 38

MP2-4242-V 21

MP2-4248 18, 20

MP2-4248-C/T 19

MP2-4248-N 18

MP2-4248-P 38

MP2-4248-V 21

MP2-4260 18

pattern no. page

MP2-4260-N 18

MP2-4818 22, 24

MP2-4818-C/T 23

MP2-4818N 22

MP2-4818-P 38

MP2-4818-V 25

MP2-4824 22, 24

MP2-4824-C/T 23

MP2-4824-M 40, 41

MP2-4824N 22

MP2-4824-P 38

MP2-4824-V 25

MP2-4830 22, 24

MP2-4830-C/T 23

MP2-4830-M 40, 41

MP2-4830N 22

MP2-4830-P 38

MP2-4830-V 25

MP2-4836 22, 24

MP2-4836-C/T 23

MP2-4836-M 40, 41

MP2-4836N 22

MP2-4836-P 38

MP2-4836-V 25

MP2-4842 22, 24

MP2-4842-C/T 23

MP2-4842-M 40, 41

MP2-4842N 22

MP2-4842-P 38

MP2-4842-V 25

MP2-4848 22, 24

MP2-4848-C/T 23

MP2-4848-M 40, 41

MP2-4848N 22

MP2-4848-P 38

MP2-4848-V 25

MP2-4860 22

MP2-4860N 22

MP2-5618 26, 28

MP2-5618-C/T 27

MP2-5618N 26

MP2-5618-P 39

MP2-5618-V 29

MP2-5624 26, 28

MP2-5624-C/T 27

MP2-5624-M 40, 41

MP2-5624N 26

MP2-5624-P 39

MP2-5624-V 29

MP2-5630 26, 28

MP2-5630-C/T 27

MP2-5630-M 40, 41

MP2-5630N 26

MP2-5630-P 39

MP2-5630-V 29

MP2-5636 26, 28

MP2-5636-C/T 27

MP2-5636-M 40, 41

MP2-5636N 26

MP2-5636-P 39

MP2-5636-V 29

MP2-5642 26, 28

MP2-5642-C/T 27

MP2-5642-M 40, 41

MP2-5642N 26

pattern no. page

MP2-5642-P 39

MP2-5642-V 29

MP2-5648 26, 28

MP2-5648-C/T 27

MP2-5648-M 40, 41

MP2-5648N 26

MP2-5648-P 39

MP2-5648-V 29

MP2-5660 26

MP2-5660N 26

MP2-6418 30, 32

MP2-6418-C/T 31

MP2-6418N 30

MP2-6418-P 39

MP2-6418-V 33

MP2-6424 30, 32

MP2-6424-C/T 31

MP2-6424-M 40, 41

MP2-6424N 30

MP2-6424-P 39

MP2-6424-V 33

MP2-6430 30, 32

MP2-6430-C/T 31

MP2-6430-M 40, 41

MP2-6430N 30

MP2-6430-P 39

MP2-6430-V 33

MP2-6436 30, 32

MP2-6436-C/T 31

MP2-6436-M 40, 41

MP2-6436N 30

MP2-6436-P 39

MP2-6436-V 33

MP2-6442 30, 32

MP2-6442-C/T 31

MP2-6442-M 40, 41

MP2-6442N 30

MP2-6442-P 39

MP2-6442-V 33

MP2-6448 30, 32

MP2-6448-C/T 31

MP2-6448-M 40, 41

MP2-6448N 30

MP2-6448-P 39

MP2-6448-V 33

MP2-6460 30

MP2-6460N 30

MP2-8018 34, 36

MP2-8018-C/T 35

MP2-8018-N 34

MP2-8018-P 39

MP2-8018-V 37

MP2-8024 34, 36

MP2-8024-C/T 35

MP2-8024-M 40, 41

MP2-8024-N 34

MP2-8024-P 39

MP2-8024-V 37

MP2-8030 34, 36

MP2-8030-C/T 35

MP2-8030-M 40, 41

MP2-8030-N 34

MP2-8030-P 39

MP2-8030-V 37

MP2-8036 34, 36

pattern no. page

MP2-8036-C/T 35

MP2-8036-M 40, 41

MP2-8036-N 34

MP2-8036-P 39

MP2-8036-V 37

MP2-8042 34, 36

MP2-8042-C/T 35

MP2-8042-M 40, 41

MP2-8042-N 34

MP2-8042-P 39

MP2-8042-V 37

MP2-8048 34, 36

MP2-8048-C/T 35

MP2-8048-M 40, 41

MP2-8048-N 34

MP2-8048-P 39

MP2-8048-V 37

MP3-A1618 47, 49

MP3-A1618N 48

MP3-A1624 47, 49

MP3-A1624-M 46

MP3-A1624N 48

MP3-A1630 47, 49

MP3-A1630-M 46

MP3-A1630N 48

MP3-A1636 47, 49

MP3-A1636-M 46

MP3-A1636N 48

MP3-A1642 47, 49

MP3-A1642-M 46

MP3-A1642N 48

MP3-A1648 47, 49

MP3-A1648-M 46

MP3-A1648N 48

MP3-A1660 47

MP3-A1660N 48

MP3-A1818 47, 49

MP3-A1818N 48

MP3-A1824 47, 49

MP3-A1824-M 46

MP3-A1824N 48

MP3-A1830 47, 49

MP3-A1830-M 46

MP3-A1830N 48

MP3-A1836 47, 49

MP3-A1836-M 46

MP3-A1836N 48

MP3-A1842 47, 49

MP3-A1842-M 46

MP3-A1842N 48

MP3-A1848 47, 49

MP3-A1848-M 46

MP3-A1848N 48

MP3-A1860 47

MP3-A1860N 48

MP3-A2218 47, 49

MP3-A2218N 48

MP3-A2224 47, 49

MP3-A2224-M 46

MP3-A2224N 48

MP3-A2230 47, 49

MP3-A2230-M 46

MP3-A2230N 48

MP3-A2236 47, 49

MP3-A2236-M 46

Morrison

207

pattern no. page

MP3-A2236N 48

MP3-A2242 47, 49

MP3-A2242-M 46

MP3-A2242N 48

MP3-A2248 47, 49

MP3-A2248-M 46

MP3-A2248N 48

MP3-A2260 47

MP3-A2260N 48

MP3-A3218 47, 49

MP3-A3218N 48

MP3-A3224 47, 49

MP3-A3224-M 46

MP3-A3224N 48

MP3-A3230 47, 49

MP3-A3230-M 46

MP3-A3230N 48

MP3-A3236 47, 49

MP3-A3236-M 46

MP3-A3236N 48

MP3-A3242 47, 49

MP3-A3242-M 46

MP3-A3242N 48

MP3-A3248 47, 49

MP3-A3248-M 46

MP3-A3248N 48

MP3-A3260 47

MP3-A3260N 48

MP3-W0918-C/T 44

MP3-W0924-C/T 44

MP3-W0930-C/T 44

MP3-W0936-C/T 44

MP3-W0942-C/T 44

MP3-W0948-C/T 44

MP3-W0960-C/T 44

MP3-W1618-C/T 44

MP3-W1624-C/T 44

MP3-W1630-C/T 44

MP3-W1636-C/T 44

MP3-W1642-C/T 44

MP3-W1648-C/T 44

MP3-W1660-C/T 44

MP3-W1818-C/T 44

MP3-W1824-C/T 44

MP3-W1830-C/T 44

MP3-W1836-C/T 44

MP3-W1842-C/T 44

MP3-W1848-C/T 44

MP3-W1860-C/T 44

MP3-W2218-C/T 44

MP3-W2224-C/T 44

MP3-W2230-C/T 44

MP3-W2236-C/T 44

MP3-W2242-C/T 44

MP3-W2248-C/T 44

MP3-W2260-C/T 44

MP3-W3218-C/T 45

MP3-W3224-C/T 45

MP3-W3230-C/T 45

MP3-W3236-C/T 45

MP3-W3242-C/T 45

MP3-W3248-C/T 45

MP3-W3260-C/T 45

MR1-DA 92, 161, 165

MR1-DB 92, 161, 165

pattern no. page

MR1-WC 92, 161

MR2-CHI-24 101

MR2-CHI-30 101

MR2-CHI-36 101

MR2-CHI-42 101

MR2-CHI-48 101

MR2-CHI-60 101

MR2-CHI-PT 101

MR2-NS-CHI 101

MR2-PICHI 101

MR2-RVR42-H2 101

MR2-RVR42-H4 101

MR2-RVR48-H2 101

MR2-RVR48-H4 101

MR3-CP 92, 161, 165

MR3-DA 90, 93, 159, 164

MR3-DAC 90, 94, 159, 164

MR3-DATSHD 88, 94

MR3-DB 90, 93, 159, 164

MR3-DBC 90, 94, 159, 164

MR3-DC 93, 164

MR3-DCC 94, 164

MR3-DX 90, 93, 159, 164

MR3-DXC 90, 94, 159, 164

MR3-DXO 90, 93, 159, 164

MR3-DXT 90, 94, 159, 164

MR3-DY 90, 93, 159, 164

MR3-DYC 90, 94, 159, 164

MR3-DYO 90, 93, 159, 164

MR3-DYT 90, 94, 159, 164

MR3-DZ 93, 164

MR3-DZC 94, 164

MR3-DZO 93, 164

MR3-DZT 94, 164

MR3-E24 88

MR3-E30NS 88

MR3-E36NS 88

MR3-E42NS 88

MR3-E48-4 88

MR3-E48NS 88

MR3-E60-4 88

MR3-E60NS 88

MR3-EGM 92, 161

MR3-EGM48 92, 161

MR3-EGMH 92, 161, 165

MR3-EJ12 89, 159

MR3-EJ12P 89

MR3-EJ18 89, 159

MR3-EJ18P 89

MR3-EJ24 89, 159

MR3-EJ24P 89

MR3-EJ30 89, 159

MR3-EJ30P 89

MR3-EJ36 89, 159

MR3-EJ36P 89

MR3-EJ42 89, 159

MR3-EJ42P 89

MR3-EJ48 89, 159

MR3-EJ48P 89

MR3-EJ54P 89, 159

MR3-EJ6 89, 159

MR3-EJ60P 89, 160

MR3-EJ66P 89, 160

MR3-EJ6P 89

MR3-EJ72P 89, 160

pattern no. page

MR3-EJ78P 89, 160

MR3-EJ84P 89

MR3-EJ90P 89

MR3-EJ96P 89

MR3-EPCM 89, 159

MR3-EPCPM 89

MR3-EPIC 90

MR3-EPNY1 91

MR3-EPNY2 91

MR3-EPSF 90

MR3-EPVR 90

MR3-ERPI 90

MR3-EV24 PC 100

MR3-EV36 PC 100

MR3-EV48 PC 100

MR3-EVB PC 100

MR3-EVI J 100

MR3-EVR 88

MR3-FDP 99

MR3-NE30 158

MR3-NE36 158

MR3-NE42 158

MR3-NE48 158

MR3-NE48-4 158

MR3-NE54 158

MR3-NE60 158

MR3-NE60-4 158

MR3-NE66 158

MR3-NE66-4 158

MR3-NE72 158

MR3-NE72-4 158

MR3-NE78 158

MR3-NE78-4 158

MR3-NEGM 161, 165

MR3-NEPD 159, 160

MR3-NEPI 160

MR3-NEPNY 160

MR3-NESD 161, 162

MR3-NESH 92, 161, 162

MR3-NESP 92, 161, 162

MR3-NT30 162

MR3-NT36 162

MR3-NT42 162

MR3-NT48 162

MR3-NT48-4 162

MR3-NT54 162

MR3-NT60 162

MR3-NT60-4 162

MR3-NT66 162

MR3-NT66-4 162

MR3-NT72 162

MR3-NT72-4 162

MR3-NT78 162

MR3-NT78-4 162

MR3-NTPD 163, 164

MR3-NTPI 164

MR3-NTPNY 164

MR3-PDC-X 97

MR3-T24 93

MR3-T30NS 93

MR3-T36NS 93

MR3-T42NS 93

MR3-T48-4 93

MR3-T48NS 93

MR3-T60-4 93

pattern no. page

MR3-T60NS 93

MR3-TJ12 96, 163

MR3-TJ12P 96

MR3-TJ18 96, 163

MR3-TJ18P 96

MR3-TJ24 96, 163

MR3-TJ24P 96

MR3-TJ30 96, 163

MR3-TJ30P 96

MR3-TJ36 96, 163

MR3-TJ36P 96

MR3-TJ42 96, 163

MR3-TJ42P 96

MR3-TJ48 96, 163

MR3-TJ48P 96

MR3-TJ54P 96, 163

MR3-TJ6 96, 163

MR3-TJ60P 96, 163

MR3-TJ66P 96, 163

MR3-TJ6P 96

MR3-TJ72P 96, 163

MR3-TJ78P 96, 163

MR3-TJ84P 96

MR3-TJ90P 96

MR3-TJ96P 96

MR3-TPCM 93, 163

MR3-TPCPM 93

MR3-TPIC 95

MR3-TPNY1 95

MR3-TPNY2 95

MR3-TPSF 95

MR3-TPVR 95

MR3-TRPI 95

MR3-TV24 PC 100

MR3-TV36 PC 100

MR3-TV48 PC 100

MR3-TVB PC 100

MR3-TVI J 100

MR3-TVR 93

MR3-UW-PDC 97

MR3-VDA 99

MR3-VDAC 99

MR3-VDB 99

MR3-VDBC 99

MR3-VDC 99

MR3-VDCC 99

MR3-VDX 99

MR3-VDXC 99

MR3-VDXO 99

MR3-VDXT 99

MR3-VDY 99

MR3-VDYC 99

MR3-VDYO 99

MR3-VDYT 99

MR3-VDZ 99

MR3-VDZC 99

MR3-VDZO 99

MR3-VDZT 99

MR3-VPBK 99

MRD-6436-(L/R) 42

MRD-6442-(L/R) 42

MRD-6448-(L/R) 42

MRD-8036-(L/R) 42

MRD-8042-(L/R) 42

MRD-8048-(L/R) 42

Morrison

208

pattern no. page

MRD-FT36 42

MRD-FT42 42

MRD-FT48 42

MS1-S2413 173

MS1-S3013 173

MS1-S3613 173

MS1-S4213 173

MS1-S4813 173

MS1-S6013 173

MS1-SO 173, 176

MS2-U2413 175

MS2-U3013 175

MS2-U3613 175

MS2-U4213 175

MS2-U4813 175

MS2-U6013 175

MS2-U6613 175

MS2-U7213 175

MS2-U7813 175

MS2-U8413 175

MS2-U9013 175

MS2-URC60-N 156

MS2-URC66-N 156

MS2-URC72-N 156

MS2-URC78-N 156

MS2-URC84-N 156

MS2-URC90-N 156

MS2-W2413 174

MS2-W3013 174

MS2-W3613 174

MS2-W4213 174

MS2-W4813 174

MS2-W6013 174

MS2-W6613 174

MS2-W7213 174

MS2-W7813 174

MS2-W8413 174

MS2-W9013 174

MSAMP1616 200

MT1-09E1 70, 71

MT1-09L2 70, 71

MT1-09T3 70, 71

MT1-16E1 70, 71

MT1-16L2 70, 71

MT1-16T3 70, 71

MT1-18E1 70, 71

MT1-18L2 70, 71

MT1-18T3 70, 71

MT1-22E1 70, 71

MT1-22L2 70, 71

MT1-22T3 70, 71

MT1-30E1 70, 71

MT1-30L2 70, 71

MT1-30T3 70, 71

MT1-32E1 70, 71

MT1-32L2 70, 71

MT1-32T3 70, 71

MT1-39E1 70, 71

MT1-39L2 70, 71

MT1-39T3 70, 71

MT1-42E1 70, 71

MT1-42L2 70, 71

MT1-42T3 70, 71

MT1-48E1 70, 71

MT1-48L2 70, 71

pattern no. page

MT1-48T3 70, 71

MT1-56E1 70, 71

MT1-56L2 70, 71

MT1-56T3 70, 71

MT1-64E1 70, 71

MT1-64L2 70, 71

MT1-64T3 70, 71

MT1-64XL2 42

MT1-64XT3 42

MT1-80E1 70, 71

MT1-80L2 70, 71

MT1-80T3 70, 71

MT1-80XL2 42, 43

MT1-80XT3 42, 43

MT5-CE1 78, 79

MT5-CH1 78, 79

MT5-CL2 78, 79

MT5-CP1 78, 79

MT5-CS2 78, 79

MT5-CT3 78, 79

MT5-CV2 56, 57

MT5-CX4 78, 79

MT5-CY3 56, 57

MT5-E24 78, 79

MT5-E30 78, 79

MT5-E36 78, 79

MT5-E42 78, 79

MT5-E48 78, 79

MT5-E60 78, 79

MT5-EX48 81

MT5-EX60 81

MT5-HLC18 80

MT5-HLC24 80

MT5-HLC30 80

MT5-HLC36 80

MT5-HLC42 80

MT5-HLC48 80

MT5-HLC60 80

MT5-HLS18 80

MT5-HLS24 80

MT5-HLS30 80

MT5-HLS36 80

MT5-HLS42 80

MT5-HLS48 80

MT5-HLS60 80

MT5-N18 78, 79

MT5-N24 78, 79

MT5-N30 78, 79

MT5-N36 78, 79

MT5-N42 78, 79

MT5-N48 78, 79

MT5-N6 78, 79

MT5-N60 78, 79

MT5-PDC-24 81

MT5-PDC-30 81

MT5-PDC-36 81

MT5-PDC-42 81

MT5-PDC-48 81

MT5-PDC-60 81

MT6-E24 102

MT6-E30 102

MT6-E36 102

MT6-E42 102

MT6-E48 102

MT6-E60 102

pattern no. page

MT6-PDC24 102

MT6-PDC30 102

MT6-PDC36 102

MT6-PDC42 102

MT6-PDC48 102

MT6-PDC60 102

MU1-C4242SS 117

MU1-C4848DD 117

MU1-C4848DS 117

MU1-C4848SD 117

MU1-C4848SS 117

MU1-C4860DS 117

MU1-C4860SD 117

MU1-C4860SS 117

MU1-C4872DS 117

MU1-C4872SD 117

MU1-C4872SS 117

MU1-C6048DS 117

MU1-C6048SD 117

MU1-C6048SS 117

MU1-C7248DS 117

MU1-C7248SD 117

MU1-C7248SS 117

MU1-M48S-AL 119

MU1-M48S-AR 119

MU1-P72SA 116

MU1-P78DA 116

MU1-R3048-B 115

MU1-R3050-B 115

MU1-R6330B 114

MU1-R6330E 114

MU1-R7530B 114

MU1-R7530E 114

MU1-S2424-A 110

MU1-S2424-B 110

MU1-S3018-B 109

MU1-S3024-A 110

MU1-S3024-B 110

MU1-S3030-A 111

MU1-S3030-B 111

MU1-S3618-B 109

MU1-S3624-A 110

MU1-S3624-B 110

MU1-S3630-A 111

MU1-S3630-B 111

MU1-S4218-B 109

MU1-S4224-A 110

MU1-S4224-B 110

MU1-S4230-A 111

MU1-S4230-B 111

MU1-S4818-B 109

MU1-S4824-A 110

MU1-S4824-B 110

MU1-S4830-A 111

MU1-S4830-B 111

MU1-S5418-B 109

MU1-S5424-A 110

MU1-S5424-B 110

MU1-S5430-A 111

MU1-S5430-B 111

MU1-S6018-B 109

MU1-S6024-A 110

MU1-S6024-B 110

MU1-S6030-A 111

MU1-S6030-B 111

pattern no. page

MU1-S6618-B 109

MU1-S6624-A 110

MU1-S6624-B 110

MU1-S6630-A 111

MU1-S6630-B 111

MU1-S7218-B 109

MU1-S7224-A 110

MU1-S7224-B 110

MU1-S7230-A 111

MU1-S7230-B 111

MU1-S7824-A 110

MU1-S7824-B 110

MU1-S7830-A 111

MU1-S7830-B 111

MU1-S8424-A 110

MU1-S8424-B 110

MU1-S8430-A 111

MU1-S8430-B 111

MU1-S9024-A 110

MU1-S9024-B 110

MU1-S9030-A 111

MU1-S9030-B 111

MU1-S9624-A 110

MU1-S9624-B 110

MU1-S9630-A 111

MU1-S9630-B 111

MU1-V3618-A 112

MU1-V3624-A 112

MU1-V3624-C 112

MU1-V4224-A 112

MU1-V4224-C 112

MU1-V4230-A 112

MU1-V4230-C 112

MU1-V42SS-A 113

MU1-V42SS-C 113

MU1-V4824-A 112

MU1-V4824-C 112

MU1-V4830-A 112

MU1-V4830-C 112

MU1-V48DS-A 113

MU1-V48DS-C 113

MU1-V48SS-A 113

MU1-V48SS-C 113

MU1-Y36S-AL 118

MU1-Y36S-AR 118

MU1-Y42S-AL 118

MU1-Y42S-AR 118

MU1-Y48S-AL 118

MU1-Y48S-AR 118

MU1-Y60S-AL 118

MU1-Y60S-AR 118

MU1-YTS 118

MV1-BP5624 199

MV1-BP6424 199

MV1-DAS 199

MV1-DFC 199

MV1-DFCX 199

MV1-DTC 199

MV1-DTCX 199

MV1-SAS 199

MV1-SFC 199

MV1-SFCX 199

MV1-STCX 199

MV2-D18S-(L/R) 199

MV2-S18S-(L/R) 199

Morrison

209

pattern no. page

MV2-STC 199

MV4-D56F-(L/R) 199

MV4-D64F-(L/R) 199

MV4-S56F-(L/R) 199

MV4-S64F-(L/R) 199

MW2-R6330B 108

MW2-R6330E 108

MW2-R7530B 108

MW2-R7530E 108

MW2-R8730B 108

MW2-R8730E 108

MW2-S2424-A 104

MW2-S2424-B 104

MW2-S3018-B 103

MW2-S3024-A 104

MW2-S3024-B 104

MW2-S3030-A 105

MW2-S3030-B 105

MW2-S3618-B 103

MW2-S3624-A 104

MW2-S3624-B 104

MW2-S3630-A 105

MW2-S3630-B 105

MW2-S4218-B 103

MW2-S4224-A 104

MW2-S4224-B 104

MW2-S4230-A 105

MW2-S4230-B 105

MW2-S4818-B 103

MW2-S4824-A 104

MW2-S4824-B 104

MW2-S4830-A 105

MW2-S4830-B 105

MW2-S5418-B 103

MW2-S5424-A 104

MW2-S5424-B 104

MW2-S5430-A 105

MW2-S5430-B 105

MW2-S6018-B 103

MW2-S6024-A 104

MW2-S6024-B 104

MW2-S6030-A 105

MW2-S6030-B 105

MW2-S6618-B 103

MW2-S6624-A 104

MW2-S6624-B 104

MW2-S6630-A 105

MW2-S6630-B 105

MW2-S6636-B 106

MW2-S6636-R 106

MW2-S7218-B 103

MW2-S7224-A 104

MW2-S7224-B 104

MW2-S7230-A 105

MW2-S7230-B 105

MW2-S7236-B 106

MW2-S7236-R 106

MW2-S7824-A 104

MW2-S7824-B 104

MW2-S7830-A 105

MW2-S7830-B 105

MW2-S7836-B 106

MW2-S7836-R 106

MW2-S8424-A 104

MW2-S8424-B 104

pattern no. page

MW2-S8430-A 105

MW2-S8430-B 105

MW2-S9024-A 104

MW2-S9024-B 104

MW2-S9030-A 105

MW2-S9030-B 105

MW2-S9624-A 104

MW2-S9624-B 104

MW2-S9630-A 105

MW2-S9630-B 105

MW2-V3618-A 107

MW2-V3624-A 107

MW2-V3624-C 107

MW2-V4224-A 107

MW2-V4224-C 107

MW2-V4230-A 107

MW2-V4230-C 107

MW2-V4824-A 107

MW2-V4824-C 107

MW2-V4830-A 107

MW2-V4830-C 107

MWM-J 180, 193

MZ1-B3015 196

MZ1-B3019 196

MZ1-B3022 196

MZ1-B3615 196

MZ1-B3619 196

MZ1-B3622 196

MZ1-B4215 196

MZ1-B4219 196

MZ1-B4222 196

MZ1-B4815 196

MZ1-B4819 196

MZ1-B4822 196

MZ1-B5415 196

MZ1-B5419 196

MZ1-B5422 196

MZ1-B6015 196

MZ1-B6019 196

MZ1-B6022 196

MZ1-B6615 196

MZ1-B6619 196

MZ1-B6622 196

MZ1-B7215 196

MZ1-B7219 196

MZ1-B7222 196

MZ1-B7815 196

MZ1-B7819 196

MZ1-B7822 196

MZ1-E2415-W/U 198

MZ1-E2419-W/U 198

MZ1-E2422-W/U 198

MZ1-E3015-W/U 198

MZ1-E3019-W/U 198

MZ1-E3022-W/U 198

MZ1-LS 200

MZ1-S2415-W/U 198

MZ1-S2419-W/U 198

MZ1-S2422-W/U 198

MZ1-S3015-W/U 198

MZ1-S3019-W/U 198

MZ1-S3022-W/U 198

MZ1-SS 200

MZ1-V3615 197

MZ1-V3619 197

pattern no. page

MZ1-V3622 197

MZ1-V4215 197

MZ1-V4219 197

MZ1-V4222 197

MZ1-V4815 197

MZ1-V4819 197

MZ1-V4822 197

MZ1-V6015 197

MZ1-V6019 197

MZ1-V6022 197

MZ1-V7215 197

MZ1-V7219 197

MZ1-V7222 197

RO1-CB 192

RO1-DPB 192

RO1-ECB 192

RO1-EPB 192

RO1-GB 193

RO1-HP12 186, 187, 189, 191

RO1-HP15 186, 187, 189, 191

RO1-HP6 186, 187, 189, 191

RO1-HP9 186, 187, 189, 191

RO1-MPB 192

RO1-PULL 193

RO1-RCB 192

RO1-RPB 192

RO1-WMF2 193

RO1-WMF3 193

RO1-WMF4 193

RO2-NS20 156, 192

RO2-NS21 156, 192

RO3-A30NL 194

RO3-A30NN 194

RO3-A36NL 194

RO3-A36NN 194

RO3-A42NL 194

RO3-A42NN 194

RO3-A48NL 194

RO3-A48NN 194

RO3-A60NL 194

RO3-A60NN 194

RO3-A72NL 194

RO3-A72NN 194

RO3-M24 188

RO3-M30 188

RO3-M36 188

RO3-M42 188

RO3-M48 188

RO3-M60 188, 189

RO3-M66 188, 189

RO3-M72 188, 189

RO3-N24 190

RO3-N30 190

RO3-N36 190

RO3-N42 190

RO3-N48 190

RO3-N60 190

RO3-N66 190

RO3-N72 190

RO3-OM30 187

RO3-OM36 187

RO3-OM42 187

RO3-OM48 187

RO3-OM60 187

RO3-OM72 187

pattern no. page

RO3-ON30 187

RO3-ON36 187

RO3-ON42 187

RO3-ON48 187

RO3-ON60 187

RO3-ON72 187

RO3-RD30 187

RO3-RD36 187

RO3-RD42 187

RO3-RD48 187

RO3-RD60 187

RO3-RD72 187

RO3-VP 187, 189, 191

RS1-DPB 192

RS1-EPB 192

RS1-M24 186

RS1-M30 186

RS1-M36 186

RS1-M42 186

RS1-M48 186

RS1-M60 186

RS1-MPB 192

RS1-N24 186

RS1-N30 186

RS1-N36 186

RS1-N42 186

RS1-N48 186

RS1-N60 186

RS1-RPB 192

RS1-VP 186

RS1-WMF24 193

RS1-WMF30 193

RS1-WMF36 193

RS1-WMF42 193

RS1-WMF48 193

RS1-WMF60 193

RTAT5E19S 195

RTAT5E25A 195

RTAT5E25S 195

RTAT5E37A 195

RTAT5E37S 195

RTAT5E49A 195

RTAT5E49S 195

RTAT5E61A 195

RTAT5E61S 195

Morrison

210

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.

Selling Policy

211March 15, 2019

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 VeneerFront Storage, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital keypad lock, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon SatelliteSurfaces, Reff Profiles, Rockwell Unscripted, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, Wood Casegoods (TheGraham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor ArmCollection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, cork andFilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structural components, KnollStudioPixel and Propeller, Tone bases.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital keypad lock, all other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable

warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

212March 15, 2019

KnollKey Lock Program

KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.

Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.

Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.

Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.

There is no charge for key-alike orders if placed with the furniture order.

IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.

If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.

Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.

KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.

Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.

Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.

Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.

How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.

Step 1 - Using the project floorplan, count the number of locks in eachworkstation.

Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.

5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station

Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.

Qty Pattern # Description Unit List Ext. List

5

Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).


5 KSPEC 2 Set of 2 cores/keys N / C N / C

Step 5 - Repeat for other groups.





Your Key instructions are complete.

Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.

Service PartsPattern # Description List Price

KKEY_ _ _ Shrouded KeySpecify key number desired

$10

KBLANK Shrouded Key Blank $10

KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired

$22

KCHANGE Change Key $10

HLKRKMASTER* Master Key $10

*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.

213

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

214