UFM Compact Ultrasonic Flowmeter
Installation
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific,
written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Suitable Applications
Use with Water OnlyFully Developed Flow
Minimal Air in PipeMinimal Sludge in Pipe
Suitable Pipe Run Available
Installation Location
Install UFM at 45° angle Avoids Interference with Air and Sludge
Installation Location
Ensure Suitable Location on Pipe20 Pipe Diameters Upstream & 10 Downstream
Set-Up
Enter Password: 71360
Enter Pipe ID
Enter Pipe Material
Obtain Separation Code
Sensor Separation
Device Displays Sensor Location Code (e.g. A2)
Position Sensors According to Code
PASSWORD:71360
Attach to PipeApply Silicon Grease to Sensors
Attached to Pipe
Snap on Top Assembly
Connect Sensor Wiring
PASSWORD:71360
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Top Related