An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA An italian
40% RECYCLED CONTENT
PRODUCT FEATURESEthos is Glazed Porcelain with a traditional stone look with a 40% recycled content body coordinated with a standard 2x2 mosaic and another contemporary hexagon mosaic.
E thos , Pa thos and Logos : t he mos t f amous wo rds o f t he Greek wo r l d . F l o r im USA’s cho ice i s ETHOS tha t means ‘ cha rac te r ’ i n o the r wo rds ‘ comb ina t i on o f qua l i t i es ’ . S t reng th , du rab i l i t y and beau t y a re t he qua l i t i es t ha t make E thos p roduc t l i ne a pe r f ec t emu la t i on o f t he na tu ra l s tone . Ava i l ab l e i n t h ree appea l i ng co lo r s and a va r i e t y o f s i zes E thos co l l ec t i on f uses e l egance and c rea t i v i t y t o be i dea l f o r amaz i ng f l oo rs and wa l l s .
ETHOS
beige18”x18”
Mosaic 12”x12” 3”x12” Bullnose
12”x12”
6”x6” Hexagon Mosaic 12”x12”
TECHNICAL SPECIFICATIONS - GLAZED PORCELAIN Surface Abrasion PEI IV ASTM C1027Water Absorption ≤ 0.5% ASTM C373Chemical Resistance NOT AFFECTED ASTM 650Dynamic Coefficient of Friction ≥0.42• ANSI 137.1Stain Resistance NOT AFFECTED ASTM C1378Breaking Strength ≥ 400 (9mm) ASTM C648Resistance to Freeze RESISTANT ASTM C1026Scratch Hardness ≥7 MOHS
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.• DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT THE COEFFICENT OF FRICTION MAY VARY WITHIN AND BETWEEN PRODUCT RUNS.
grey
noce
Clearly distinguishable differencesin texture and/or pattern with similar colors.
SLIGHT VARIATION
12”x24”
F MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
Beige
Grey
Noce
ETH
OS
GLAZEDPORCELAIN
FLOOR TILE18”x18”12”x24”12”x12”6”x6”
MosaicsBullnose
9
Beige
Grey
Noce
Colors Shown in this brochure may vary from actual product. Final selection should be made from actual product samples.
WHY PORCELAIN?There are many reasons to choose impervious porcelain tile over other floor coverings. It offers the largest array of design options and holds its value the longest. In a comparison between the many different flooring options, porcelain tile offers one of the most durable and least expensive options over the lifespan of the building.
Benefits of Porcelain Tile• Impervious to water• Easy to maintain• Variety of design options • Environmentally friendly• Resistant to germs and bacteria • Fade resistant• Fire resistant• Durable - best long-term value vs.
other floor coverings
HOW TO MAINTAIN YOUR PORCELAIN TILE• Sweep or vacuum regularly.• Wash with a household cleaner and
hot water then rinse with clean water (do not use wax, oil-based, or abrasive cleaners).
Scan this barcode with your smart phone for more care, maintenance, and installationstips at www.florimusa.com
✦ Minimum grout size recommended = 5 mm (or approx. 3/16" If staggered tile placement, we recommend using a 30% offset. If specified brick pattern with 1/2 pattern mandatory, a bigger grout is recommended to hide imperfections of installation (minimum 1/4").
40% RECYCLEDCONTENT
Differences among pieces from the same production run are minimal.
UNIFORM APPEARANCEV1
Clearly distinguishable differences in texture and/or pattern with similar colors.
SLIGHT VARIATIONV2
While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece will vary significantly.
MODERATE VARIATIONV3
SUBSTANTIAL VARIATIONRandom color differences from tile to tile, so that one tile may have totally different colors from that on other tiles. Thus, the final installation will be unique.
V4SHADE VARIATION
COLOR SPECIFICATIONS AND SIZES AVAILABLE
Nominal Size BEIGE NOCE GREY
18”x18” 1094703 1094704 109470512”x24” 1094783 1094784 109478512”x12” 1094699 1094700 1094701
6”x6” 1094711 1094712 10947132”x2” Mosaic (12”x12”) 1094715 1094716 1094717
2”x2” Hexagon Mosaic (12”x12”) 1094719 1094720 10947213”x12” Bullnose 1094707 1094708 1094709
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
• Due to the inherent nature of fire D porcelain tile, it is important to note that the coeffic ient of friction may vary within an D between pro Duct runs.
TECHNICAL SPECIFICATIONSSurface Abrasion PEI IV ASTM C1027Water Absorption 0.5% ASTM C373Chemical Resistance CLASS A ASTM 650
Coefficient of Friction(Dry) 0.80 • ASTM C1028(Wet) 0.60 • ASTM C1028
Stain Resistance CLASS A ASTM C1378Breaking Strength 400 (9mm) ASTM C648Resistance to freeze RESISTANT ASTM C1026Scratch Hardness 7 mohs
PACKAGING
NOMINAL SIZE METRIC(CM)
THICKNESS(MM) PIECES PER BOX SQ. FT PER BOX WEIGHT PER BOX
BOXES PERPALLET
WEIGHT PER PALLET
18”x18” 45x45 9 mm 7 15.75 64.5 32 206412”x24” 30x60 9 mm 7 14 57.4 48 275512”x12” 30x30 9 mm 14 14 57.4 48 2755
6”x6” 15x15 9 mm 34 8.5 35 72 25202”x2” Mosaic (12”x12”) 30x30 9 mm 10 10 41 45 1900
2”x2” Hex Mosaic (12”x12”) . 30x30 9 mm 10 10 41 45 19003”x12” Bullnose 7.5x30 9 mm 12 3 12.0 168 2071
all other sizes will be package D as or Dere D. .noitamrofni gnigakcap rof 1mirolf-778 ta ecivre s remotsu c mirol f tcatnoc esaelp
✦ 2/1 htiw nrettap kcirb Deificeps f i .tesffo %03 a gnisu Dnemmocer ew ,tnemecalp elit Dereggats f i ”61/3 .xorppa ro( mm 5 = DeDnemmocer ezis tuorg muminim pattern man Datory, a bigger grout is recommen DeD to hi De imperfections of installation (minimum 1/4”).
FLORIMUSA
ETHOS
An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An
7024
34 -
Jan
uary
201
2
PROGRESS THAT TOUCHES AND INVESTS IN THE ENTIRE SOCIETYAs a active member of the U.S Green Building Council, Florim spreads awareness to the entire American communities
and encourages towards the use of building solutions inspired by environmentally friendly practices. Using Florim products for project implementation, will positively contribute in obtaining scores and points required for
earning the LEED certification (Leadership in Energy and Environmental Design).
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR A CONSCIOUS BUILDING TRADEFlorim offers products containing recycled material. The adoption of eco-compatible production systems is merit of
Italian designs produced in the U.S.
TECHNICAL DEVELOPMENT THAT CONSIDERS THE NATURAL ENVIRONMENTFlorim commits to the eco-compatible project and translates the same into an avant-guard production process,
minimizing the negative impact on the environment.
ETH
OS
GLAZEDPORCELAIN
FLOOR TILE18”x18”12”x24”12”x12”
6”x6”MosaicsBullnose
9
Beige
Grey
Noce
40% RECYCLEDCONTENT
300 International Blvd. Clarksville, TN 37040free call 877 - Florim1 (356-7461)
tel. 931 645 5100www.florimusa.com
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
FLORIMUSA
ETHOS
6 Page Brochure (8 ½”x11”) - $0.75 each702430
Scan this barcode for more care, maintenance, and installation tips at www.florimusa.com
Sample Board (25”x25”)$11.00 each702501
Contractor Board(9”x11”) - $5.00 each702432
Architect Binder (8 ¾”x11”) - $15.00 each702434
Back of Tile Label (11 3/4”x113/4”) - $1.50 each702431
An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA
ETHOSFLORIMUSA
300 International Blvd. Clarksville, TN 37040
Toll free: 877 - Florim1 (356-7461)tel. 931 645 5100
www.florimusa.com
IV18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaics - bullnoseG L A Z E D P O R C E L A I N
* CONSUMERS SHOULD LOOK AT MULTIPLE PIECES OF TILE TO REALIZE THE FULL COLOR SPECTRUM OF THIS PRODUCT
While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece will vary significantly.
MODERATE VARIATION
*V3
Random color differences from tile to tile, so that one tile may have totally different colors from that on other tiles. Thus, the final installation will be unique.
SUBSTANTIAL VARIATION
*V4
Clearly distinguishable differences in texture and/or pattern with similar colors.
SLIGHT VARIATION
V2Differences among pieces from the same production run are minimal.
UNIFORM APPEARANCE
V1
SHADE VARIATION
SUGGESTED INSTALLATIONS
PEI Class
Recommended for all residential applications as well as medium commercial and light institutional applications.
Moderate to heavy foot traffic
PROGRESS THAT TOUCHES PEOPLE AND INVESTS IN THE ENTIRE SOCIETYAs an active member of the U.S. Green Building Council, Florim promotes awareness in the American community of a greener tomorrow by encouraging the use of building solutions inspired by environmentally friendly practices. Using Florim products in building projects will contribute to the attainment of scores and points required for LEED certification (Leadership in Energy and Environmental Design).
A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR RESPONSIBLE AND SUSTAINABLE BUILDINGFlorim offers products containing recycled material. The adoption of ecologically compatible production systems emerges from Italian designs produced in the U.S.A.
TECHNICAL DEVELOPMENT THAT RESPECTS THE NATURAL ENVIRONMENTFlorim is committed to eco-sustainable projects, as reflected in avant-garde production processes that minimize the impact on the environment.
Colors Shown in this brochure may vary from actual product. Final selection should be made from actual product samples.
WHY PORCELAIN?There are many reasons to choose impervious porcelain tile over other floor coverings. It offers the largest array of design options and holds its value the longest. In a comparison between the many different flooring options, porcelain tile offers one of the most durable and least expensi-ve options over the lifespan of the building.
Benefits of Porcelain Tile• Impervious to water• Easy to maintain• Variety of design options • Environmentally friendly• Resistant to germs and bac-
teria • Fade resistant• Fire resistant• Durable - best long-term
value vs. other floor coveings
HOW TO MAINTAIN YOUR PORCELAIN TILE• Sweep or vacuum regularly.• Wash with a household
cleaner and hot water then rinse with clean water (do not use wax, oil-based, or abrasive cleaners).
Find more care, maintenance, and installation tips at www.florimusa.com
40% RECYCLED CONTENT
BEIGE
1094703 - 18”x18”
1094699 - 12”x12”1094783 - 12”x24”
10947116”x6”
10947152”x2” Mosaic (12”x12”)
10947073”x12” Bullnose
10947192”x2” Hexagon Mosaic (12”x12”)
GREY
1094705 - 18”x18”
1094701 - 12”x12”1094785 - 12”x24”
10947136”x6”
10947172”x2” Mosaic (12”x12”)
10947093”x12” Bullnose
10947212”x2” Hexagon Mosaic (12”x12”)
NOCE
1094704 - 18”x18”
1094700 - 12”x12”1094784 - 12”x24”
10947126”x6”
10947162”x2” Mosaic (12”x12”)
10947083”x12” Bullnose
10947202”x2” Hexagon Mosaic (12”x12”)
COLOR SPECIFICATIONS AND SIZES AVAILABLE
Nominal Size BEIGE NOCE GREY
18”x18” 1094703 1094704 109470512”x24” 1094783 1094784 109478512”x12” 1094699 1094700 1094701
6”x6” 1094711 1094712 10947132”x2” Mosaic (12”x12”) 1094715 1094716 1094717
2”x2” Hexagon Mosaic (12”x12”) 1094719 1094720 10947213”x12” Bullnose 1094707 1094708 1094709
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
• Due to the inherent nature of fire D porcelain tile, it is important to note that the coeffic ient of friction may vary WITHIN AND BETWEEN PRODUCT RUNS.
TECHNICAL SPECIFICATIONSSurface Abrasion PEI IV ASTM C1027Water Absorption 0.5% ASTM C373Chemical Resistance CLASS A ASTM 650
Coefficient of Friction(Dry) 0.80 • ASTM C1028(Wet) 0.60 • ASTM C1028
Stain Resistance CLASS A ASTM C1378Breaking Strength 400 (9mm) ASTM C648Resistance to freeze RESISTANT ASTM C1026Scratch Hardness 7 MOHS
PACKAGING
NOMINAL SIZE METRIC(CM)
THICKNESS(MM) PIECES PER BOX SQ. FT PER BOX WEIGHT PER BOX
BOXES PERPALLET
WEIGHT PER PALLET
18”x18” 45x45 9 mm 7 15.75 64.5 32 206412”x24” 30x60 9 mm 7 14 57.4 48 275512”x12” 30x30 9 mm 14 14 57.4 48 2755
6”x6” 15x15 9 mm 34 8.5 35 72 25202”x2” Mosaic (12”x12”) 30x30 9 mm 10 10 41 45 1900
2”x2” Hex Mosaic (12”x12”) . 30x30 9 mm 10 10 41 45 19003”x12” Bullnose 7.5x30 9 mm 12 3 12.0 168 2071
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED. PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
Find more care, maintenance, and installation tips at www.florimusa.com
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
FLORIMUSA
ETHOS
7024
32 -
Jan
uary
201
2
GLAZED PORCELAIN SIZES AVAILABLE:
18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaicsTRIMS: BULLNOSE
FLOOR / WALL THICKNESS: 9 MM
40% RECYCLED CONTENT
BEIGE
1094703 - 18”x18”
1094699 - 12”x12”1094783 - 12”x24”
10947116”x6”
10947152”x2” Mosaic (12”x12”)
10947073”x12” Bullnose
10947192”x2” Hexagon Mosaic (12”x12”)
GREY
1094705 - 18”x18”
1094701 - 12”x12”1094785 - 12”x24”
10947136”x6”
10947172”x2” Mosaic (12”x12”)
10947093”x12” Bullnose
10947212”x2” Hexagon Mosaic (12”x12”)
NOCE
1094704 - 18”x18”
1094700 - 12”x12”1094784 - 12”x24”
10947126”x6”
10947162”x2” Mosaic (12”x12”)
10947083”x12” Bullnose
10947202”x2” Hexagon Mosaic (12”x12”)
COLOR SPECIFICATIONS AND SIZES AVAILABLE
Nominal Size BEIGE NOCE GREY
18”x18” 1094703 1094704 109470512”x24” 1094783 1094784 109478512”x12” 1094699 1094700 1094701
6”x6” 1094711 1094712 10947132”x2” Mosaic (12”x12”) 1094715 1094716 1094717
2”x2” Hexagon Mosaic (12”x12”) 1094719 1094720 10947213”x12” Bullnose 1094707 1094708 1094709
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI A137.1.
• Due to the inherent nature of fire D porcelain tile, it is important to note that the coeffic ient of friction may vary WITHIN AND BETWEEN PRODUCT RUNS.
TECHNICAL SPECIFICATIONSSurface Abrasion PEI IV ASTM C1027Water Absorption 0.5% ASTM C373Chemical Resistance CLASS A ASTM 650
Coefficient of Friction(Dry) 0.80 • ASTM C1028(Wet) 0.60 • ASTM C1028
Stain Resistance CLASS A ASTM C1378Breaking Strength 400 (9mm) ASTM C648Resistance to freeze RESISTANT ASTM C1026Scratch Hardness 7 MOHS
PACKAGING
NOMINAL SIZE METRIC(CM)
THICKNESS(MM) PIECES PER BOX SQ. FT PER BOX WEIGHT PER BOX
BOXES PERPALLET
WEIGHT PER PALLET
18”x18” 45x45 9 mm 7 15.75 64.5 32 206412”x24” 30x60 9 mm 7 14 57.4 48 275512”x12” 30x30 9 mm 14 14 57.4 48 2755
6”x6” 15x15 9 mm 34 8.5 35 72 25202”x2” Mosaic (12”x12”) 30x30 9 mm 10 10 41 45 1900
2”x2” Hex Mosaic (12”x12”) . 30x30 9 mm 10 10 41 45 19003”x12” Bullnose 7.5x30 9 mm 12 3 12.0 168 2071
ALL OTHER SIZES WILL BE PACKAGED AS ORDERED. PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2 pattern man Datory, a bigger grout is recommen DeD to hi De imperfections of installation (minimum 1/4”).
7024
38 -
Jan
uary
201
2
Beige
An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA
FLOOR AND WALL
FLOOR AND WALLTiles with styling and sizes suitable for both floors and walls.
877-Florim1 (356-7461)
3”x12” Bullnose
V2AVAILABLE IN ALL COLORS
FLORIMUSA
GLAZED PORCELAINSIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6” - MOSAICSTRIMS: BULLNOSE
FLOOR / WALL SHADE VARIATION : V2
THICKNESS: 9 MMETHOS18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaics - bullnoseG L A Z E D P O R C E L A I N
40% RECYCLED CONTENT
Scan this barcode with your smart phone for more care, maintenance, and installationstips at www.florimusa.com
Clearly distinguishable differences in texture and/or pattern with similar colors.
SLIGHT VARIATION
Grey Noce
an tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An italian tile made in USA
An italian tile made in USA An italian tile made in USA An italian tile made in USA
FLORIMUSA
ETHOS
An Italian tile made in USA An Italian tile made in USA An Italian tile
made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An Italian tile made in USA An italian tile made in USA
An italian tile made in USA An italian tile made in USA An italian tile made in USA
18”x18” - 1094704 • 12”x24” - 1094784 • 12”x12” - 1094700 • 6”x6” - 1094712NOCE
18”x18” - 1094705 • 12”x24” - 1094785 • 12”x12” - 1094701 • 6”x6” - 1094713GREY
18”x18” - 1094703 • 12”x24” - 1094783 • 12”x12” - 1094699 • 6”x6” - 1094711BEIGE
FLORIMUSA
ETHOS
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile
18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaics - bullnoseGLAZED PORCELAIN
40% RECYCLEDCONTENT
Scan this barcode with your smart phone for more care, maintenance, and installationstips at www.florimusa.com
An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An italian tile
made in USA An italian tile made in USA An italian tile
made in USA An italian tile made in USA An italian tile made in USA An italian tile
made in USA
NOMINAL SIZE INCHES METRIC(CM)
THICKNESS(MM)
18”x18” 17 3/4”x17 3/4” 45x45 9 mm12”x24” 11 3/4”x 23 3/4” 30x60 9 mm12”x12” 11 3/4”x 11 3/4” 30x30 9 mm
6”x6” 5 3/4”x 5 3/4” 15x15 9 mm2”x2” Mosaic (12”x12”) 11 3/4”x 11 3/4” 30x30 9 mm
2”x2” Hexagon Mosaic (12”x12”) . 11 3/4”x 11 3/4” 30x30 9 mm3”x12” Bullnose 3”x 11 3/4” 7.5x30 9 mm
7024
31 -
Jan
uary
201
2HOW TO MAINTAIN YOUR PORCELAIN TILE• Sweep or vacuum regularly.• Wash with a household cleaner and
hot water then rinse with clean water (do not use wax, oil-based, or abra-sive cleaners).
ETHOS
FLORIMUSA
V2300 International Blvd. Clarksville, TN 37040Toll free:1- 877 - Florim1 (356-7461)Phone: 931 645 5100www.florimusa.com
18”x18” - 12”x24” - 12”x12” - 6”x6” - mosaics - trimsGLAZED PORCELAIN
GLAZEDPORCELAINSIZES AVAILABLE:
12”X24” - 18”X18” - 12”X12” - 6”X6” - MOSAICSTRIMS: BULLNOSE
FLOOR / WALL SHADE VARIATION: V2
THICKNESS: 9MM
✦ MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16” IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PATTERN WITH 1/2 PATTERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFECTIONS OF INSTALLATION (MINIMUM 1/4”).
40% RECYCLEDCONTENT
40% RECYCLED CONTENT
BEIGE
1094703 - 18”x18”
1094699 - 12”x12”1094783 - 12”x24”
10947116”x6”
10947152”x2” Mosaic (12”x12”)
10947073”x12” Bullnose
10947192”x2” Hexagon Mosaic (12”x12”)
GREY
1094705 - 18”x18”
1094701 - 12”x12”1094785 - 12”x24”
10947136”x6”
10947172”x2” Mosaic (12”x12”)
10947093”x12” Bullnose
10947212”x2” Hexagon Mosaic (12”x12”)
NOCE
1094704 - 18”x18”
1094700 - 12”x12”1094784 - 12”x24”
10947126”x6”
10947162”x2” Mosaic (12”x12”)
10947083”x12” Bullnose
10947202”x2” Hexagon Mosaic (12”x12”)
Scan this barcode with your smart phone for more care, maintenance, and installationstips at www.florimusa.com
Clearly distinguishable differences in texture and/or pattern with similar colors.
SLIGHT VARIATION
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
V2 SLIGHT VARIATION
Culla Set (18”x33”) Set of 3 boards$150.00702512
An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAmade in USA An italian tile made in USA An italian
40% RECYCLED CONTENT
Clearly distinguishable differencesin texture and/or pattern with similar colors.
SLIGHT VARIATION
Top Related