8/7/2019 linksys home router Manual
1/50
USER GUIDE
Wireless-G Home Router
with SpeedBurst
Model:WRT54GH
8/7/2019 linksys home router Manual
2/50
About This Guide
iWireless-G Home Router with SpeedBurst
About This Guide
Icon Descriptions
While reading through the User Guide you may see
various icons that call attention to speciic items. Below isa description o these icons:
NOTE: This check mark indicates that there isa note o interest and is something that youshould pay special attention to while using theproduct.
WARNING: This exclamation point indicatesthat there is a caution or warning and it issomething that could damage your property orproduct.
WEB: This globe icon indicates a noteworthywebsite address or e-mail address.
Online Resources
Website addresses in this document are listed withouthttp:// in ront o the address because most current webbrowsers do not require it. I you use an older web browser,you may have to add http:// in ront o the web address.
Resource Website
Linksys www.linksysbycisco.com
Linksys
Internationalwww.linksysbycisco.com/international
Glossary www.linksysbycisco.com/glossary
Network Security www.linksysbycisco.com/security
Copyright and Trademarks
2009 Cisco Systems, Inc. All rightsreserved. Cisco, the Cisco logo, and Linksysare trademarks or registered trademarkso Cisco Systems, Inc. and/or its ailiatesin the United States and certain othercountries. All other trademarks mentionedin this document or website are theproperty o their respective owners. Theuse o the word partner does not imply apartnership relationship between Ciscoand any other company.
8/7/2019 linksys home router Manual
3/50
Table of Contents
iiWireless-G Home Router with SpeedBurst
Chapter 1: Product Overview 1
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chapter 2: Wireless Security Checklist 3General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 3: Advanced Confguration 4
Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup > DDNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setup > MAC Address Clone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wireless > Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wireless > Wireless MAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Wireless > Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Security > Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Security > VPN Passthrough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Access Restrictions > Internet Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Applications and Gaming > Single Port Forwarding. . . . . . . . . . . . . . . . . . . . . . . .15
Applications and Gaming > Port Range Forwarding . . . . . . . . . . . . . . . . . . . . . . .16
Applications & Gaming > Port Range Triggering . . . . . . . . . . . . . . . . . . . . . . . . . .16
Applications and Gaming > DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Administration > Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Administration > Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Administration > Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Administration > Factory Deaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Administration > Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Status > Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Status > Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Status > Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Appendix A: Troubleshooting 23
Appendix B: Specifcations 24
Appendix C: Warranty Inormation 25Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8/7/2019 linksys home router Manual
4/50
Table of Contents
iiiWireless-G Home Router with SpeedBurst
Appendix D: Regulatory Inormation 27
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Saety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Avis dIndustrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Avis de non-responsabilit concernant les appareils sans fl . . . . . . . . . . . . . . . . . .28
User Inormation or Consumer Products Covered by EU Directive 2002/96/EC on WasteElectric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Appendix E: Sotware End User License Agreement 33
Cisco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Sotware Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
8/7/2019 linksys home router Manual
5/50
Chapter 1 Product Overview
1Wireless-G Home Router with SpeedBurst
Chapter 1:Product OverviewThank you or choosing the Linksys by Cisco Wireless-GHome Router with SpeedBurst. The Router lets you access
the Internet via a wireless connection or through one o itsour switched ports. You can also use the Router to shareresources such as computers, printers and iles. A varietyo security eatures help to protect your data and yourprivacy while you are online. Security eatures includeWPA2 security, a Stateul Packet Inspection (SPI) irewall,and NAT technology. Coniguring the Router is easy usingthe provided browserbased utility.
Front Panel
1, 2, 3, 4 (Green) These numbered LEDs,corresponding with the numbered ports on theRouters back panel, serve two purposes. I theLED is continuously lit, the Router is successullyconnected to a device through that port. Alashing LED indicates network activity over
that port.Wireless (Green) The Wireless LED lights upwhen the wireless eature is enabled. I the LEDis lashing, the Router is sending or receivingdata over the network.
Internet (Green) The Internet LED lights upwhen there is a connection made through theInternet port. It lashes to indicate networkactivity over the Internet port.
Power (Green) The Power LED lights upand will stay on while the Router is poweredon. When the Router goes through its sel-diagnostic mode during every boot-up, thisLED will lash. When the diagnostic is complete,the LED will be solidly lit.
Back Panel
Internet The Internet port is where you willconnect your cable or DSL Internet connection.
4, 3, 2, 1 These Ethernet ports (4, 3, 2, 1)connect the Router to computers on your wirednetwork and other Ethernet network devices.
On/Off Push the On/O button to power on oro the Router.
Power The Power port connects to the includedpower adapter.
Side Panel
Reset There are two ways to reset the Routerto its actory deaults. Either press and hold theReset button or approximately ive seconds, orrestore the deaults rom the Administration >Factory Defaults screen o the Routersbrowser-based utility. (Reer to Administration> Factory Defaults, page 20.)
Horizontal Placement
The Router has our rubber eet on its bottom panel. Placethe Router on a level surace near an electrical outlet.
8/7/2019 linksys home router Manual
6/50
Chapter 1 Product Overview
2Wireless-G Home Router with SpeedBurst
Wall-Mounting Placement
The Router has two wall-mount slots on its bottompanel. The distance between the slots is 51.3 mm(2.02 inches).
Two screws are needed to mount the Router.
Suggested Mounting Hardware
2.5-3.0mm
4-5 mm 1-1.5 mm
Note: Mounting hardware illustrations are nottrue to scale.
NOTE: Linksys is not responsible or damagesincurred by insecure wall-mounting hardware.
Follow these instructions:
1. Determine where you want to mount the Router. Makesure that the wall you use is smooth, lat, dry, andsturdy. Also make sure the location is within reach oan electrical outlet.
2. Drill two holes into the wall. Make sure the holes are51.3 mm (2.02 inches) apart.
3. Insert a screw into each hole and leave 3 mm(0.12 inches) o its head exposed.
4. Maneuver the Router so the wall-mount slots line upwith the two screws.
5. Place the wall-mount slots over the screws and slidethe Router down until the screws it snugly into thewall-mount slots.
51.3 mm
Wall-Mounting Template
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drillprecise spacing.
8/7/2019 linksys home router Manual
7/50
Chapter 2 Wireless Security Checklist
3Wireless-G Home Router with SpeedBurst
Chapter 2:Wireless Security ChecklistWireless networks are convenient and easy to install, sohomes with high-speed Internet access are adopting them
at a rapid pace. Because wireless networking operates bysending inormation over radio waves, it can be morevulnerable to intruders than a traditional wired network.Like signals rom your cellular or cordless phones, signalsrom your wireless network can also be intercepted. Sinceyou cannot physically prevent someone rom connectingto your wireless network, you need to take some additionalsteps to keep your network secure.
1. Change the default wirelessnetwork name or SSID
Wireless devices have a deault wireless network nameor Service Set Identiier (SSID) set by the actory. Thisis the name o your wireless network, and can be upto 32 characters in length. Linksys wireless productsuse linksys as the deault wireless network name. Youshould change the wireless network name to somethingunique to distinguish your wireless network rom otherwireless networks that may exist around you, but do notuse personal inormation (such as your Social Securitynumber) because this inormation may be available oranyone to see when browsing or wireless networks.
2. Change the default password
For wireless products such as access points and routers,you will be asked or a password when you want to changetheir settings. These devices have a deault password setby the actory. The Linksys deault password is admin.Hackers know these deaults and may try to use themto access your wireless device and change your networksettings. To thwart any unauthorized changes, customizethe devices password so it will be hard to guess.
3. Enable MAC address filteringLinksys routers give you the ability to enable Media AccessControl (MAC) address iltering. The MAC address is aunique series o numbers and letters assigned to everynetworking device. With MAC address iltering enabled,wireless network access is provided solely or wirelessdevices with speciic MAC addresses. For example, you canspeciy the MAC address o each computer in your homeso that only those computers can access your wirelessnetwork.
4. Enable encryption
Encryption protects data transmitted over a wirelessnetwork. Wi-Fi Protected Access (WPA/WPA2) and WiredEquivalent Privacy (WEP) oer dierent levels o security
or wireless communication.A network encrypted with WPA/WPA2 is more securethan a network encrypted with WEP, because WPA/WPA2uses dynamic key encryption. To protect the inormationas it passes over the airwaves, you should enable thehighest level o encryption supported by your networkequipment.
WEP is an older encryption standard and may be theonly option available on some older devices that do notsupport WPA.
General Network Security GuidelinesWireless network security is useless i the underlyingnetwork is not secure.
Password protect all computers on the network andindividually password protect sensitive iles.
Change passwords on a regular basis.
Install anti-virus sotware and personal irewallsotware.
Disable ile sharing (peer-to-peer). Some applicationsmay open ile sharing without your consent and/or
knowledge.
Additional Security Tips
Keep wireless routers, access points, or gateways awayrom exterior walls and windows.
Turn wireless routers, access points, or gatewayso when they are not being used (at night, duringvacations).
Use strong passphrases that are at least eight charactersin length. Combine letters and numbers to avoid usingstandard words that can be ound in the dictionary.
WEB: For more inormation on wireless security,visit www.linksysbycisco.com/security
8/7/2019 linksys home router Manual
8/50
Chapter 3 Advanced Configuration
4Wireless-G Home Router with SpeedBurst
Chapter 3:Advanced ConfigurationAter setting up the Router with the Setup Wizard (locatedon the CD-ROM), the Router will be ready or use. However,
i you want to change its advanced settings, use theRouters browser-based utility. This chapter describes eachweb page o the utility and each pages key unctions. Youcan access the utility via a web browser on a computerconnected to the Router.
The browser-based utility has these main tabs: Setup,Wireless, Security, Access Restrictions, Applications &Gaming, Administration, and Status. Additional tabs willbe available ater you click one o the main tabs.
NOTE: When irst installing the Router, youshould use the Setup Wizard on the Setup
CD-ROM. I you want to conigure advancedsettings, use this chapter to learn about thebrowser-based utility.
Access the Browser-Based Utility
To access the browser-based utility, launch the webbrowser on your computer, and enter the Routers deaultIP address, 192.168.1.1, in the Address ield. Then pressEnter.
A login screen will appear. (Non-Windows XP users will
see a similar screen.) Leave the User name ield blank.The irst time you open the browser-based utility, use thedeault password admin. (You can set a new passwordrom the Administration > Managementscreen.) ClickOKto continue.
Login Screen
Setup > Basic Setup
The irst screen that appears is the Basic Setup screen. Thisallows you to change the Routers general settings.
Setup > Basic Setup
Internet Setup
The Internet Setup section conigures the Router to yourInternet connection. Most o this inormation can beobtained through your Internet Service Provider (ISP).
Internet Connection Type
Select the type o Internet connection your ISP providesrom the drop-down menu. These are the available types:
Automatic Coniguration - DHCP
Static IP
PPPoE
PPTP
L2TP
Telstra Cable
Automatic Configuration - DHCP
By deault, the Routers Internet Connection Type is setto Automatic Configuration - DHCP, which should be
kept only i your ISP supports DHCP or you are connectingthrough a dynamic IP address. (This option usually appliesto cable connections.)
Internet Connection Type > Automatic Coniguration - DHCP
8/7/2019 linksys home router Manual
9/50
Chapter 3 Advanced Configuration
5Wireless-G Home Router with SpeedBurst
Static IP
I you are required to use a permanent IP address toconnect to the Internet, select Static IP.
Internet Connection Type > Static IP
Internet IP Address This is the Routers IP address, whenseen rom the Internet. Your ISP will provide you with theIP Address you need to speciy here.
Subnet Mask This is the Routers Subnet Mask, as seenby users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the IPaddress o the ISP server.
DNS 1-3 Your ISP will provide you with at least one DNS(Domain Name System) server IP address.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocolover Ethernet) to establish Internet connections. I you areconnected to the Internet through a DSL line, check withyour ISP to see i they use PPPoE. I they do, you will have
to enable PPPoE.
Internet Connection Type > PPPoE
Username and Password Enter the Username andPassword provided by your ISP.
Service Name (Optional) I provided by your ISP, enterthe Service Name.
Connect on Demand: Max Idle Time You can conigurethe Router to cut the Internet connection ater it has beeninactive or a speciied period o time (Max Idle Time). Iyour Internet connection has been terminated due toinactivity, Connect on Demand enables the Router toautomatically re-establish your connection as soon as youattempt to access the Internet again. To use this option,select Connect on Demand. In the Max Idle Time ield,enter the number o minutes you want to have elapsed
beore your Internet connection terminates. The deaultMax Idle Time is 5 minutes.
Keep Alive: Redial Period I you select this option,the Router will periodically check your Internetconnection. I you are disconnected, then the Routerwill automatically re-establish your connection. To use
this option, select Keep Alive. In the Redial Period ield,you speciy how oten you want the Router to checkthe Internet connection. The deault Redial Period is30 seconds.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service thatapplies to connections in Europe only.
Internet Connection Type > PPTP
I your ISP supports DHCP or you are connecting througha dynamic IP address, then select Obtain an IP Address
Automatically. I you are required to use a permanent IPaddress to connect to the Internet, then select Specify anIP Address. Then conigure the ollowing:
Specify an IP Address This is the Routers IP address,as seen rom the Internet. Your ISP will provide youwith the IP Address you need to speciy here.
Subnet Mask This is the Routers Subnet Mask, asseen by users on the Internet (including your ISP). YourISP will provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with theIP address o the ISP server.
DNS 1-3 Your ISP will provide you with at least oneDNS (Domain Name System) server IP address.
PPTP Server IP Address Your ISP will provide you withthe IP address o the PPTP server.
Username and Password Enter the Username andPassword provided by your ISP.
Connect on Demand: Max Idle Time You can conigurethe Router to cut the Internet connection ater it has beeninactive or a speciied period o time (Max Idle Time). Iyour Internet connection has been terminated due toinactivity, Connect on Demand enables the Router to
8/7/2019 linksys home router Manual
10/50
Chapter 3 Advanced Configuration
6Wireless-G Home Router with SpeedBurst
automatically re-establish your connection as soon as youattempt to access the Internet again. To use this option,select Connect on Demand. In the Max Idle Time ield,enter the number o minutes you want to have elapsedbeore your Internet connection terminates. The deaultMax Idle Time is 5 minutes.
Keep Alive: Redial Period If you select this option, theRouter will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, selectKeep Alive. In the Redial Periodfield, you specify how often
you want the Router to check the Internet connection. The
default value is 30 seconds.
L2TP
L2TP is a service that applies to connections in Israel only.
Internet Connection Type > L2TP
Server IP Address This is the IP address o the L2TPServer. Your ISP will provide you with the IP Address youneed to speciy here.
Username and Password Enter the Username andPassword provided by your ISP.
Connect on Demand: Max Idle Time You can conigurethe Router to cut the Internet connection ater it has beeninactive or a speciied period o time (Max Idle Time). Iyour Internet connection has been terminated due toinactivity, Connect on Demand enables the Router toautomatically re-establish your connection as soon as youattempt to access the Internet again. To use this option,select Connect on Demand. In the Max Idle Time ield,enter the number o minutes you want to have elapsedbeore your Internet connection terminates. The deaultMax Idle Time is 5 minutes.
Keep Alive: Redial Period I you select this option,
the Router will periodically check your Internetconnection. I you are disconnected, then the Routerwill automatically re-establish your connection. To usethis option, select Keep Alive. In the Redial Period ield,you speciy how oten you want the Router to checkthe Internet connection. The deault Redial Period is30 seconds.
Telstra Cable
Telstra Cable is a service that applies to connections inAustralia only.
Internet Connection Type > Telstra Cable
Server IP Address This is the IP address o the HeartbeatServer. Your ISP will provide you with the IP Address youneed to speciy here.
Username and Password Enter the Username andPassword provided by your ISP.
Connect on Demand: Max Idle Time You can conigurethe Router to cut the Internet connection ater it has beeninactive or a speciied period o time (Max Idle Time). Iyour Internet connection has been terminated due toinactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as youattempt to access the Internet again. To use this option,select Connect on Demand. In the Max Idle Time ield,enter the number o minutes you want to have elapsedbeore your Internet connection terminates. The deaultMax Idle Time is 5 minutes.
Keep Alive: Redial Period I you select this option,the Router will periodically check your Internetconnection. I you are disconnected, then the Routerwill automatically re-establish your connection. To usethis option, select Keep Alive. In the Redial Period ield,you speciy how oten you want the Router to check
the Internet connection. The deault Redial Period is30 seconds.
Optional Settings
Some o these settings may be required by your ISP. Veriywith your ISP beore making any changes.
Optional Settings
Host Name and Domain Name These ields allow you tosupply a host and domain name or the Router. Some ISPs,usually cable ISPs, require these names as identiication.You may have to check with your ISP to see i yourbroadband Internet service has been conigured with ahost and domain name. In most cases, leaving these ieldsblank will work.
MTU MTU is the Maximum Transmission Unit. It speciiesthe largest packet size permitted or Internet transmission.Select Manual i you want to manually enter the largestpacket size that is transmitted. To have the Router select
8/7/2019 linksys home router Manual
11/50
Chapter 3 Advanced Configuration
7Wireless-G Home Router with SpeedBurst
the best MTU or your Internet connection, keep thedeault, Auto.
Size When Manual is selected in the MTUield, this optionis enabled. Leave this value in the 1200 to 1500 range. Thedeault size depends on the Internet Connection Type:
DHCP, Static IP, or Telstra: 1500 PPPoE: 1492
PPTP or L2TP: 1460
Network Setup
The Network Setup section changes the settings o thelocal network. Wireless setup is perormed through theWireless tab.
Router IP
This presents both the Routers Local IP Address and
Subnet Mask as seen by your network.
Router IP
DHCP Server Setting
The settings allow you to conigure the Routers DynamicHost Coniguration Protocol (DHCP) server unction. TheRouter can be used as a DHCP server or your network. ADHCP server automatically assigns an IP address to eachcomputer on your network. I you choose to enable the
Routers DHCP server option, make sure there is no otherDHCP server on your network.
DHCP Server Setting
DHCP Server DHCP is enabled by actory deault. I youalready have a DHCP server on your network, or you donot want a DHCP server, then select Disabled (no otherDHCP eatures will be available).
DHCP Reservation Click this button i you want to assigna ixed local IP address to a MAC address.
DHCP Reservation
You will see a list o DHCP clients with the ollowinginormation: Client Name, Interace, IP Address, andMAC Address.
DHCP Reservation
Select Clients from DHCP Table Click the Selectcheck box to reserve a clients IP address. Then click
Add Clients.
Manually Adding Client To manually assign an IPaddress, enter the clients name in the Enter ClientName ield. Enter the IP address you want it to have intheAssign IP Address ield. Enter its MAC address in theTo This MAC Address ield. Then clickAdd.
Clients Already Reserved
A list o DHCP clients and their ixed local IP addresseswill be displayed at the bottom o the screen. I youwant to remove a client rom this list, clickRemove.
Click Save Settings to apply your changes, or clickCancel Changes to clear your changes. To update theon-screen inormation, clickRefresh. To exit this screenand return to the Basic Setup screen, clickClose.
Start IP Address Enter a value or the DHCP server tostart with when issuing IP addresses. Because the Routersdefault IP address is 192.168.1.1, the Start IP Address must
be 192.168.1.2 or greater, but smaller than 192.168.1.253.
The default is 192.168.1.100.
Maximum Number of Users Enter the maximum numbero computers that you want the DHCP server to assign IPaddresses to. This number cannot be greater than 253.
The deault is 50.IP Address Range The range o available IP addresses. isdisplayed.
Client Lease Time The Client Lease Time is the amounto time a network user will be allowed connection to theRouter with their current dynamic IP address. Enter theamount o time, in minutes, that the user will be leasedthis dynamic IP address. Ater the time has expired, theuser will be automatically assigned a new dynamic IPaddress, or the lease will be renewed. The deault is 0minutes, which means one day.
8/7/2019 linksys home router Manual
12/50
Chapter 3 Advanced Configuration
8Wireless-G Home Router with SpeedBurst
Static DNS 1-3 The Domain Name System (DNS) is howthe Internet translates domain or website names into
Internet addresses or URLs. Your ISP will provide you with at
least one DNS Server IP Address. If you wish to use another,
enter that IP Address in one of these fields. You can enter up
to three DNS Server IP Addresses here. The Router will use
these for quicker access to functioning DNS servers.WINS The Windows Internet Naming Service (WINS)manages each computers interaction with the Internet. Iyou use a WINS server, enter that servers IP Address here.Otherwise, leave this blank.
Time Settings
Time Settings
Time Zone Select the time zone in which your network
unctions rom this drop-down menu.
Automatically adjust clock for daylight savingchanges Select this option to have the Routerautomatically adjust or daylight saving time.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Setup > DDNS
The Router oers a Dynamic Domain Name System (DDNS)eature. DDNS lets you assign a ixed host and domainname to a dynamic Internet IP address. It is useul when
you are hosting your own website, FTP server, or otherserver behind the Router.
Beore you can use this eature, you need to signup or DDNS service with a DDNS service provider,www.dyndns.org or www.TZO.com. I you do not wantto use this eature, keep the deault, Disabled.
DDNS
DDNS Service
I your DDNS service is provided by DynDNS.org, thenselect DynDNS.org rom the drop-down menu. I yourDDNS service is provided by TZO, then select TZO.com.The eatures available on the DDNS screen will vary,depending on which DDNS service provider you use.
DynDNS.org
Setup > DDNS > DynDNS
Username Enter the Username or your DDNS account.
Password Enter the Password or your DDNS account.Host Name The is the DDNS URL assigned by the DDNSservice.
System Select the DynDNS service you use: Dynamic,Static, or Custom. The deault selection is Dynamic.
Mail Exchange (Optional) Enter the address o your mailexchange server, so e-mails to your DynDNS address go toyour mail server.
Backup MX This eature allows the mail exchange serverto be a backup. To disable this eature, keep the deault,Disabled. To enable the eature, select Enabled. I you
are not sure which setting to select, keep the deault,Disabled.
Wildcard This setting enables or disables wildcardsor your host. For example, i your DDNS address ismyplace.dyndns.org and you enable wildcards, thenx.myplace.dyndns.org will work as well (x is the wildcard).To disable wildcards, keep the deault, Disabled. To enablewildcards, select Enabled. I you are not sure which settingto select, keep the deault, Disabled.
Internet IP Address The Routers Internet IP address isdisplayed here. Because it is dynamic, it will change.
Status The status o the DDNS service connection isdisplayed here.
Update To manually trigger an update, click this button.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
13/50
Chapter 3 Advanced Configuration
9Wireless-G Home Router with SpeedBurst
TZO.com
Setup > DDNS > TZO
E-mail Address, TZO Key, and Domain Name Enter thesettings o the account you set up with TZO.
Internet IP Address The Routers Internet IP address isdisplayed here. Because it is dynamic, it will change.
Status The status o the DDNS service connection isdisplayed here.
Update To manually trigger an update, click this button.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a uniquepiece o hardware or identiication. Some ISPs will requireyou to register a MAC address in order to access the
Internet. I you do not wish to re-register the MAC addresswith your ISP, you may assign the MAC address you havecurrently registered with your ISP to the Router with theMAC Address Clone eature.
Setup > MAC Address Clone
MAC Address Clone
Enabled/Disabled To have the MAC address cloned,select Enabled.
MAC Address Enter the MAC address registered withyour ISP here.
Clone My PCs MAC Click this button to clone the MACaddress o the computer you are using.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Wireless > Basic Wireless Settings
The basic settings or wireless networking are set on thisscreen.
Basic Wireless Settings
Wireless > Basic Wireless Settings
Network Mode From this drop-down menu, you canselect the wireless standards running on your network.I you have Wireless-G and Wireless-B devices in yournetwork, keep the deault, Mixed. I you have onlyWireless-G devices, select Wireless-G Only. I you haveonly Wireless-B devices, select Wireless-B Only. I youdo not have any wireless devices in your network, selectDisabled.
Network Name (SSID) The SSID is the network nameshared among all points in a wireless network. TheSSID must be identical or all devices in the wirelessnetwork. It is case-sensitive and must not exceed32 characters (use any o the characters on the keyboard).Make sure this setting is the same or all points in yourwireless network. For added security, you should changethe deault SSID (linksys) to a unique name.
Standard Channel Select the appropriate channel oryour wireless network. I you are not sure which channelto select, then keep the deault, Auto.
SSID Broadcast When wireless clients survey the localarea or wireless networks to associate with, they willdetect the SSID broadcast by the Router. To broadcast the
Routers SSID, keep the deault, Enabled. I you do notwant to broadcast the Routers SSID, then select Disabled.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
14/50
Chapter 3 Advanced Configuration
10Wireless-G Home Router with SpeedBurst
Wireless > Wireless Security
The Wireless Security screen conigures the security oyour wireless network. The Router supports the ollowingwireless security mode options: WPA2 Personal, WPAPersonal, and WEP. (WPA stands or Wi-Fi Protected Access,
which is a security standard stronger than WEP encryption.WEP stands or Wired Equivalent Privacy.)
Wireless Security
Security Mode
Select the security method or your wireless network. Iyou do not want to use wireless security, keep the deault,Disabled.
WPA2 Personal
NOTE: I you are using WPA2, then each devicein your wireless network MUST use the sameWPA2 method and shared key, or else thenetwork will not unction properly.
Security Mode > WPA2 Personal
Encryption WPA2 supports two encryption methods,TKIP and AES, with dynamic encryption keys. Select thetype o algorithm, AES or WPA-TKIP or WPA2-AES. Thedeault is WPA-TKIP or WPA2-AES.
Passphrase Enter a Passphrase o 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructsthe Router how oten it should change the encryption
keys. The deault is 3600 seconds.
WPA Personal
NOTE: I you are using WPA, then each device inyour wireless network MUST use the same WPAmethod and shared key, or else the network willnot unction properly.
Security Mode > WPA Personal
Passphrase Enter a Passphrase o 8-63 characters.
Key Renewal Enter a Key Renewal period, which instructsthe Router how oten it should change the encryptionkeys. The deault is 3600 seconds.
WEP
WEP is a basic encryption method, which is not as secureas WPA.
IMPORTANT: If you are using WEP encryption,
then each device in your wireless network MUST
use the same WEP encryption method and key,
or else the network will not function properly.
Security Mode > WEP
Encryption Select a level o WEP encryption,40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).The deault is 40/64 bits (10 hex digits).
Passphrase Enter a Passphrase to automatically generateWEP keys. Then clickGenerate.
Key 1 I you did not enter a Passphrase, enter the WEPkey manually.
Transmit Key Transmit Key 1 is used.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
15/50
Chapter 3 Advanced Configuration
11Wireless-G Home Router with SpeedBurst
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your networks radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled To filter wireless users by MAC address,either permitting or blocking access, select Enabled. If you
do not wish to filter users by MAC address, keep the default,
Disabled.
Access Restriction
Prevent Select this option to block wireless access byMAC address. This button is selected by deault.
Permit Select this option to allow wireless access by MACaddress. This button is not selected by deault.
MAC Address Filter List
Wireless Client List Click this button to open the WirelessClient Listscreen.
Wireless Client List
Wireless Client List
This screen shows computers and other devices onthe wireless network. The list can be sorted by ClientName, IP Address, MAC Address, and Status.
Select Save to MAC Address Filter List or any device
you want to add to the MAC Address Filter List. ThenclickAdd.
To update the on-screen inormation, click Refresh.To exit this screen and return to the Wireless MAC Filterscreen, clickClose.
MAC 01-32 Enter the MAC addresses o the deviceswhose wireless access you want to block or allow.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Wireless > Advanced Wireless Settings
The Advanced Wireless Settings screen is used to set upthe Routers advanced wireless unctions. These settingsshould only be adjusted by an expert administrator asincorrect settings can reduce wireless perormance.
Wireless > Advanced Wireless Settings
Advanced Wireless
AP Isolation This option isolates all wireless clients andwireless devices on your network rom each other. Wirelessdevices will be able to communicate with the Router butnot with each other. To use this option, select Enable. APIsolation is disabled by deault.
Frame Burst Enabling this option should provide yournetwork with greater perormance, depending on themanuacturer o your wireless products. To use the FrameBurst option, keep the deault, Enabled.
Authentication Type The Authentication Type settingis available i the Security Mode is WEP. The deaultis Auto, which allows either Open System or SharedKey authentication to be used. With Open System
8/7/2019 linksys home router Manual
16/50
Chapter 3 Advanced Configuration
12Wireless-G Home Router with SpeedBurst
authentication, the sender and the recipient do NOTuse a WEP key or authentication. With Shared Keyauthentication, the sender and recipient use a WEP key orauthentication. Select Shared Key to only use Shared Keyauthentication.
Basic Rate The Basic Rate setting is not actually one
rate o transmission but a series o rates at which theRouter can transmit. (The Basic Rate is not the actual rateo data transmission. I you want to speciy the Routersrate o data transmission, conigure the TransmissionRate setting.) The Router will advertise its Basic Rate tothe other wireless devices in your network, so they knowwhich rates will be used. The Router will also advertise thatit will automatically select the best rate or transmission.The deault setting is Default, when the Router cantransmit at all standard wireless rates (1-2 Mbps, 5.5 Mbps,11 Mbps, 18 Mbps, and 24Mbps). Select 1-2 Mbps oruse with older wireless technology. Select All, when theRouter can transmit at all wireless rates.
Transmission Rate The Transmission setting is availablei the Network Mode is Mixed, Wireless-G Only, orWireless-B Only. The rate o data transmission should beset depending on the speed o your wireless network.Select rom a range o transmission speeds, or keep thedeault, Auto, to have the Router automatically use theastest possible data rate and enable the Auto-Fallbackeature. Auto-Fallback will negotiate the best possibleconnection speed between the Router and a wirelessclient.
CTS Protection Mode The Router automatically uses CTS(Clear-To-Send) Protection Mode when your Wireless-Gdevices are experiencing severe problems and are not ableto transmit to the Router in an environment with heavy802.11b traic. This option boosts the Routers ability tocatch all Wireless-G transmissions but severely decreasesperormance. To use this option, keep the deault, Auto.To disable this option, select Disabled.
Beacon Interval Enter a value between 1 and 65,535milliseconds. The Beacon Interval value indicates therequency interval o the beacon. A beacon is a packetbroadcast by the Router to synchronize the wirelessnetwork. The deault is 100 milliseconds.
DTIM Interval This value, between 1 and 255, indicatesthe interval o the Delivery Traic Indication Message(DTIM). A DTIM ield is a countdown ield inormingclients o the next window or listening to broadcastand multicast messages. When the Router has bueredbroadcast or multicast messages or associated clients, itsends the next DTIM with a DTIM Interval value. Its clientshear the beacons and awaken to receive the broadcastand multicast messages. The deault value is 1.
Fragmentation Threshold This value speciies themaximum size or a packet beore data is ragmentedinto multiple packets. I you experience a high packet
error rate, you may slightly increase the FragmentationThreshold. Setting the Fragmentation Threshold too lowmay result in poor network perormance. Only minorreduction o the deault value is recommended. In mostcases, it should remain at its deault value o2346.
RTS Threshold Should you encounter inconsistent data
low, only minor reduction o the deault value, 2347, isrecommended. I a network packet is smaller than thepreset RTS threshold size, the RTS/CTS mechanism willnot be enabled. The Router sends Request to Send (RTS)rames to a particular receiving station and negotiatesthe sending o a data rame. Ater receiving an RTS, thewireless station responds with a Clear to Send (CTS) rameto acknowledge the right to begin transmission. The RTSThreshold value should remain at its deault value o2347.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Security > Firewall
The Firewallscreen is used to conigure a irewall that canilter out various types o unwanted traic on the Routerslocal network.
Security > Firewall
Firewall
SPI Firewall Protection To use irewall protection,keep the deault selection, Enabled. To turn o irewallprotection, select Disabled.
Internet Filter
For the ollowing options, select the option to enable it, ordeselect the option to disable it.
Filter Anonymous Internet Requests This eature makesit more diicult or outside users to work their way intoyour network. This eature is enabledby deault. Deselectthis option to allow anonymous Internet requests.
8/7/2019 linksys home router Manual
17/50
Chapter 3 Advanced Configuration
13Wireless-G Home Router with SpeedBurst
Filter Multicast Multicasting allows or multipletransmissions to speciic recipients at the same time. Imulticasting is permitted, then the Router will allow IPmulticast packets to be orwarded to the appropriatecomputers. Select this option to ilter multicasting. Thisoption is disabled by deault.
Filter Internet NAT Redirection This eature uses portorwarding to block access to local servers rom localnetworked computers. Select this option to ilter InternetNAT redirection. This option is disabled by deault.
Filter IDENT (Port 113) This eature keeps port 113 rombeing scanned by devices outside o your local network.This eature is enabled by deault. Deselect this option todisable it.
Web Filter
For the ollowing options, select the option to enable it, ordeselect the option to disable it.
Proxy Use o WAN proxy servers may compromise theGateways security. Denying Proxy will disable access toany WAN proxy servers. Select this option to enable proxyiltering. This option is disabled by deault.
Java Java is a programming language or websites. I youdeny Java, you run the risk o not having access to Internetsites created using this programming language. Selectthis option to enable Java iltering. This option is disabledby deault.
ActiveX ActiveX is a programming language or websites.I you deny ActiveX, you run the risk o not having access to
Internet sites created using this programming language.Select this option to enable ActiveX iltering. This optionis disabled by deault.
Cookies A cookie is data stored on your computer andused by Internet sites when you interact with them. Selectthis option to ilter cookies. This option is disabled bydeault.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Security > VPN Passthrough
The VPN Passthrough screen allows you to enable VPN
tunnels using IPSec, PPTP, or L2TP protocols to pass through
the Routers firewall.
Security > VPN Passthrough
VPN Passthrough
IPSec Passthrough Internet Protocol Security (IPSec) isa suite o protocols used to implement secure exchangeo packets at the IP layer. To allow IPSec tunnels to passthrough the Router, keep the deault, Enabled.
PPTP Passthrough Point-to-Point Tunneling Protocol(PPTP) allows the Point-to-Point Protocol (PPP) to betunneled through an IP network. To allow PPTP tunnels to
pass through the Router, keep the deault, Enabled.L2TP Passthrough Layer 2 Tunneling Protocol is themethod used to enable Point-to-Point sessions via theInternet on the Layer 2 level. To allow L2TP tunnels to passthrough the Router, keep the deault, Enabled.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
18/50
Chapter 3 Advanced Configuration
14Wireless-G Home Router with SpeedBurst
Access Restrictions > Internet Access
The Internet Access screen allows you to block or allowspeciic kinds o Internet usage and traic, such as Internetaccess, designated services, and websites during speciicdays and times.
Access Restrictions > Internet Access
Internet Access Policy
Access Policy Access can be managed by a policy. Usethe settings on this screen to establish an access policy(ater Save Settings is clicked). Selecting a policy romthe drop-down menu will display that policys settings. Todelete a policy, select that policys number and clickDeleteThis Entry. To view all the policies, clickSummary.
SummaryThe policies are listed with the ollowing inormation: No.,Policy Name, Days, and Time o Day. To delete a policy,select the policys Delete option, and then click Delete.To return to the Internet Access Policyscreen, clickClose.
Summary
Status Policies are disabled by deault. To enable a policy,select the policy number rom the drop-down menu, andselect Enabled.
To create a policy, ollow steps 1-11. Repeat these steps tocreate additional policies, one at a time.
1. Select a number rom the Access Policy drop-downmenu.
2. Enter a Policy Name in the ield provided.
3. To enable this policy, select Enabled.
4. Click Edit List to select which computers will be
affected by the policy. The Internet Access PC Listscreen
appears. You can select a computer by MAC address or
IP address. You can also enter a range of IP addresses
if you want this policy to affect a group of computers.
After making your changes, click Save Settings toapply your changes, or click Cancel Changes to clear
your changes. Then clickClose.
Internet Access PC List
8/7/2019 linksys home router Manual
19/50
Chapter 3 Advanced Configuration
15Wireless-G Home Router with SpeedBurst
5. Select the appropriate option, Deny or Allow,depending on whether you want to block or allowInternet access or the computers you listed on theInternet Access PC Listscreen.
6. Decide which days and what times you want this policyto be enorced. Select the individual days during which
the policy will be in eect, or select Everyday. Thenenter a range o hours and minutes during which thepolicy will be in eect, or select 24 Hours.
7. You can block websites with speciic URL addresses.Enter each URL in a separate Website Blocking by URLAddress ield.
8. You can also block websites using speciic keywords.Enter each keyword in a separate Website Blocking byKeywordield.
9. You can ilter access to various services accessedover the Internet, such as FTP or telnet. (Youcan block up to three applications per policy.)
From the Applications list, select the application youwant to block. Then click the >> button to move it tothe Blocked List. To remove an application rom theBlocked List, select it and click the Single Port
Forwarding
The Single Port Forwarding screen allows you to customize
port services for common applications on this screen.
When users send these types of requests to your network viathe Internet, the Router will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers (use the DHCP Reservation feature on the Basic Setup
screen; refer to DHCP Reservation, page 7).
Applications and Gaming > Single Port Forwarding
Single Port Forwarding
Common applications are available or the irst iveentries. Select the appropriate application. Then enter theIP address o the server that should receive these requests.Select Enabled to activate this entry.
For additional applications, complete the ollowing ields:
Application Name Enter the name you wish to give theapplication. Each name can be up to 12 characters.
External Port Enter the external port number used by
the server or Internet application. Check with the Internetapplication documentation or more inormation.
Internal Port Enter the internal port number used bythe server or Internet application. Check with the Internetapplication documentation or more inormation.
Protocol Select the protocol(s) used or this application,TCP, UDP, or Both.
To IP Address For each application, enter the IP addresso the computer that should receive the requests. I youassigned a static IP address to the computer, then youcan look up its IP address; clickDHCP Reservation on theBasic Setup screen (refer to DHCP Reservation, page 7).
Enabled For each application, select Enabled to enableport orwarding.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
20/50
Chapter 3 Advanced Configuration
16Wireless-G Home Router with SpeedBurst
Applications and Gaming > Port Range
Forwarding
The Port Range Forwarding screen allows you to set up
public services on your network, such as web servers,
ftp servers, e-mail servers, or other specialized Internet
applications. (Specialized Internet applications are anyapplications that use Internet access to perform functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)
When users send these types of requests to your network via
the Internet, the Router will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers (use the DHCP Reservation feature on the Basic Setup
screen; refer to DHCP Reservation, page 7).
If you need to forward all ports to one computer, click the
DMZ tab.
Applications and Gaming > Port Range Forwarding
Port Range Forwarding
To orward a port, enter the inormation on each line orthe criteria required.
Application Name In this ield, enter the name youwish to give the application. Each name can be up to 12characters.
Start~End Port Enter the number or range o port(s)used by the server or Internet applications. Check with theInternet application documentation or more inormation.
Protocol Select the protocol(s) used or this application,TCP, UDP, or Both.
To IP Address For each application, enter the IP addresso the computer that should receive the requests. I youassigned a static IP address to the computer, then youcan look up its IP address; clickDHCP Reservation on theBasic Setup screen (refer to DHCP Reservation, page 7).
Enabled Select Enabled to enable port orwarding orthe applications you have deined.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Applications & Gaming > Port Range
Triggering
The Port Range Triggering screen allows the Router towatch outgoing data or speciic port numbers. The IPaddress o the computer that sends the matching data isremembered by the Router, so that when the requesteddata returns through the Router, the data is pulled backto the proper computer by way o IP address and portmapping rules.
Applications and Gaming > Port Range Triggering
Port Range Triggering
Application Name Enter the application name o thetrigger.
Triggered Range For each application, enter the startingand ending port numbers o the triggered port numberrange. Check with the Internet application documentationor the port number(s) needed.
Forwarded Range For each application, enter thestarting and ending port numbers o the orwardedport number range. Check with the Internet applicationdocumentation or the port number(s) needed.
Enabled Select Enabled to enable port triggering or theapplications you have deined.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
21/50
Chapter 3 Advanced Configuration
17Wireless-G Home Router with SpeedBurst
Applications and Gaming > DMZ
The DMZ eature allows one network computer to beexposed to the Internet or use o a special-purposeservice such as Internet gaming or videoconerencing.DMZ hosting orwards all the ports at the same time to
one computer. The Port Range Forwarding eature is moresecure because it only opens the ports you want to haveopened, while DMZ hosting opens all the ports o onecomputer, exposing the computer to the Internet.
Applications and Gaming > DMZ
DMZ
Any computer whose port is being orwarded must haveits DHCP client unction disabled and should have a newstatic IP address assigned to it because its IP address maychange when using the DHCP unction.
Enabled/Disabled To disable DMZ hosting, selectDisabled. To expose one computer, select Enabled. Thenconigure the ollowing settings:
Source IP Address I you want any IP address to be thesource, select Any IP Address. I you want to speciy an IPaddress or range o IP addresses as the designated source,select and complete the IP address range ields.
Destination I you want to speciy the DMZ host by IP
address, select IP Address and enter the IP address inthe ield provided. I you want to speciy the DMZ hostby MAC address, select MAC Address and enter the MACaddress in the ield provided. To retrieve this inormation,clickDHCP Client Table.
DMZ > DHCP Client Table
DHCP Client Table
The DHCP Client Table lists computers and otherdevices that have been assigned IP addresses by theRouter. The list can be sorted by Client Name, Interace,IP Address, MAC Address, and Expires time (howmuch time is let or the current IP address). To selecta DHCP client, click Select. To update the on-screen
inormation, click Refresh. To exit this screen andreturn to the DMZscreen, clickClose.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
22/50
Chapter 3 Advanced Configuration
18Wireless-G Home Router with SpeedBurst
Administration > Management
The Administration > Managementscreen allows thenetworks administrator to manage speciic Routerunctions or access and security.
Administration > Management
Management
Router Access
To ensure the Routers security, you will be asked or yourpassword when you access the Routers browser-basedutility. The deault is admin.
Router Password Enter a new password or the Router.
Re-enter to Confirm Enter the password again to confirm.
Local Management Access
Access via Wireless I you are using the Router in a publicdomain where you are giving wireless access to yourguests, you can disable wireless access to the Routersbrowser-based utility. You will only be able to access theutility via a wired connection i you disable the setting.Keep the deault, Enabled, to allow wireless access to the
utility, or select Disabled to block wireless access to theutility.
Remote Management Access
Remote Management To permit remote access o theRouter, rom outside the local network, select Enabled.Otherwise, keep the deault, Disabled.
Remote Upgrade I you want to be able to upgrade theRouter remotely, rom outside the local network, selectEnabled. (You must have the Remote Management
eature enabled as well.) Otherwise, keep the deault,Disabled.
Allowed Remote IP Address I you want to be able toaccess the Router rom any external IP address, select AnyIP Address. I you want to speciy an external IP address orrange o IP addresses, then select the second option and
complete the ields provided.
Remote Management Port Enter the port number thatwill be open to outside access.
NOTE: When you are in a remote locationand wish to manage the Router, enterhttp://xxx.xxx.xxx.xxx:yyyy orhttps://xxx.xxx.xxx.xxx:yyyy , dependingon whether you use HTTP or HTTPS. Enter theRouters speciic Internet IP address in placeo xxx.xxx.xxx.xxx, and enter the RemoteManagement Port number in place o yyyy.
UPnP
Universal Plug and Play (UPnP) allows the appropriateWindows operating system to automatically conigure theRouter or various Internet applications, such as gamingand videoconerencing.
UPnP To use UPnP, keep the deault, Enabled. Otherwise,select Disabled.
Allow Users to Configure Keep the deault, Enabled,i you want to be able to make manual changes to theRouter while using the UPnP eature. Otherwise, select
Disabled.
Allow Users to Disable Internet Access Select Enabled,i you want to be able to prohibit any and all Internetconnections. Otherwise, keep the deault, Disabled.
Backup and Restore
Backup Configuration To back up the Routersconiguration settings, click this button and ollow theon-screen instructions.
Restore Configuration To restore the Routersconiguration settings, click this button and ollow the
on-screen instructions. ( You must have previously backedup the Routers coniguration settings.)
System Reboot
Start to Reboot I you need to restart the Router, clickthis button.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
8/7/2019 linksys home router Manual
23/50
Chapter 3 Advanced Configuration
19Wireless-G Home Router with SpeedBurst
Administration > Log
The Router can keep logs o all traic or your Internetconnection.
Administration > Log
Log
Enabled/Disabled To disable the Log unction, selectDisabled. To monitor traic between the network and theInternet, keep the deault, Enabled. With logging enabled,you can choose to view temporary logs.
View Log To view the logs, clickView Log.
Log > View Log
Log
Type Select Incoming Log, Outgoing Log, SecurityLog, or DHCP Client Log.
Log The Incoming Log displays a temporarylog o the source IP addresses and destinationport numbers or the incoming Internet traic. TheOutgoing Log displays a temporary log o the local IPaddresses, destination URLs/IP addresses, and service/port numbers or the outgoing Internet traic. The
Security log displays the login inormation or thebrowser-based utility. The DHCP Client Log displaysthe LAN DHCP server status inormation.
ClickSave the Log to save this inormation to a ile onyour computers hard drive. Click Refresh to updatethe log. ClickClear to clear all the inormation that isdisplayed.
ClickSave Settings to apply your changes, or clickCancelChanges to clear your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you tocheck the connections o your network devices, includingconnection to the Internet.
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks the status o a connection.
IP or URL Address Enter the address o the computerwhose connection you wish to test.
Packet Size Enter the packet size you want to use. Thedeault is 32 bytes.
Number to Ping Enter the number o times you wish totest the connection. The deault is 5.
Start to Ping To run the test, click this button. The Pingscreen shows i the test is successul. ClickClose to returnto the Diagnostics screen.
Diagnostics > Ping
Traceroute Test
Traceroute checks the perormance o a connection.
IP or URL Address Enter the address o the computerwhose connection you wish to test.
8/7/2019 linksys home router Manual
24/50
Chapter 3 Advanced Configuration
20Wireless-G Home Router with SpeedBurst
Start to Traceroute To run the test, click this button.The Traceroute screen shows i the test is successul. ClickClose to return to the Diagnostics screen.
Diagnostics > Traceroute
Administration > Factory DeaultsRestore the Router to its actory deault settings.
Administration > Factory Deaults
NOTE: Do not restore the actory deaults unlessyou are having diiculties with the Router andhave exhausted all other troubleshootingmeasures. Once the Router is reset, you will haveto re-enter all o your coniguration settings.
Factory Deaults
Restore All Settings To reset the Routers settings to thedeaults, click this button and then ollow the on-screeninstructions. Any custom settings you have saved will belost when the deault settings are restored.
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Routers firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new
firmware has a feature you want to use.
Administration > Firmware Upgrade
NOTE: The Router may lose the settings youhave customized. Beore you upgrade itsirmware, write down all o your custom settings.Ater you upgrade its irmware, you may have tore-enter all o your coniguration settings.
Firmware Upgrade
Beore upgrading the irmware, download the Routersirmware upgrade ile rom the Linksys website,www.linksysbycisco.com.
Please select a file to upgrade To select the irmwareupgrade ile, click Browse and ollow the on-screeninstructions.
Start to Upgrade Ater you have selected theappropriate ile, click this button, and ollow the on-screeninstructions.
WARNING: The irmware upgrade must not
be interrupted; do not reboot or power o theRouter during the irmware upgrade.
8/7/2019 linksys home router Manual
25/50
Chapter 3 Advanced Configuration
21Wireless-G Home Router with SpeedBurst
Status > Router
The Routerscreen displays inormation about the Routerand its current settings.
Status > Router
Router Inormation
Firmware Version The version number o the Routerscurrent irmware is displayed.
Firmware Verification The unique identiier o theirmware is displayed.
Current Time The time set on the Router is displayed.
Internet MAC Address The Routers MAC Address, as
seen by your ISP, is displayed.Host Name The Host Name o the Router is displayed (i itwas entered on the Setup > Basic Setup screen).
Domain Name The Domain Name o the Router isdisplayed (i it was entered on the Setup > Basic Setupscreen).
Internet Connection
This section shows the current network inormationstored in the Router. The inormation varies depending onthe Internet connection type selected on the Setup > BasicSetup screen.
For a DHCP connection, select Release IP Address orRenew IP Address as appropriate to release or renewa DHCP lease. For a PPPoE or similar connection, selectConnect or Disconnect as appropriate to connect to ordisconnect rom the Internet.
ClickRefresh to update the on-screen inormation.
Status > Local Network
The Local Network screen displays inormation about thelocal, wired network.
Status > Local Network
Local NetworkLocal MAC Address The MAC address o the Routerslocal, wired interace is displayed.
Router IP Address The Routers IP address, as it appearson your local network, is displayed.
Subnet Mask The Subnet Mask o the Router isdisplayed.
DHCP Server
DHCP Server The status o the Routers DHCP serverunction is displayed.
Start IP Address For the range o IP addresses that canbe used by devices on your local network, the starting IPaddress is displayed.
End IP Address For the range o IP addresses that canbe used by devices on your local network, the ending IPaddress is displayed.
DHCP Clients Table Click this button to view a list ocomputers or other devices that are using the Router asa DHCP server.
8/7/2019 linksys home router Manual
26/50
Chapter 3 Advanced Configuration
22Wireless-G Home Router with SpeedBurst
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and otherdevices that have been assigned IP addresses by theRouter. The list can be sorted by IP Address, MACAddress, Interace, and Client Name. To remove aDHCP client, click Delete. To update the on-screeninormation, click Refresh. To exit this screen and
return to the Local Networkscreen, clickClose.
Status > Wireless Network
The Wireless Network screen displays inormation aboutyour wireless network.
Status > Wireless
Wireless Network
MAC Address The MAC address o the Routers local,wireless interace is displayed.
Mode The wireless mode used by the network isdisplayed.
Network Name (SSID) The name o the wireless network,which is also called the SSID, is displayed.
Standard Channel The Standard Channel setting(selected on the Wireless > Basic Wireless Settings screen)is displayed.
Security The wireless security method used by theRouter is displayed.
SSID Broadcast The status o the SSID Broadcast eatureis displayed.
8/7/2019 linksys home router Manual
27/50
Appendix A Troubleshooting
23Wireless-G Home Router with SpeedBurst
Appendix A:Troubleshooting
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connectto the Internet:
Make sure that the Router is powered on. The PowerLED should be lit and not lashing.
I the Power LED is lashing, then power o all oyour network devices, including the modem, Router,and computers. Then power on each device in theollowing order:
1. Cable or DSL modem
2. Router
3. Computer Check the cable connections. The computer should
be connected to one o the ports numbered 1-4 onthe Router, and the modem must be connected to theInternet port on the Router.
The modem does not have an Ethernet port.
The modem is a dial-up modem or traditional dial-upservice. To use the Router, you need a cable/DSL modemand high-speed Internet connection.
You cannot use the DSL service to connect manually to
the Internet.
Ater you have installed the Router, it will automaticallyconnect to your Internet Service Provider (ISP), so you nolonger need to connect manually.
The DSL telephone line does not ft into the Routers
Internet port.
The Router does not replace your modem. You still needyour DSL modem in order to use the Router. Connect thetelephone line to the DSL modem, and then insert thesetup CD into your computer. ClickSetup and ollow theon-screen instructions.
When you double-click the web browser, you are
prompted or a username and password. I you want to
get rid o the prompt, ollow these instructions.
Launch the web browser and perorm the ollowing steps(these steps are speciic to Internet Explorer but are similaror other browsers):
1. Select Tools > Internet Options.
2. Click the Connections tab.
3. Select Never dial a connection.
4. ClickOK.
The Router does not have a coaxial port or the cable
connection.
The Router does not replace your modem. You still needyour cable modem in order to use the Router. Connect
your cable connection to the cable modem, and theninsert the setup CD into your computer. Click Setup andollow the on-screen instructions.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the sameon both the computer and the Router. I you have enabledwireless security, then make sure the same securitymethod and key are used by both the computer and theRouter.
You need to modiy the settings on the Router.
Open the web browser (or example, Internet Explorer orFireox), and enter the Routers IP address in the addressield (the deault IP address is 192.168.1.1). Whenprompted, enter the password to the Router (the deault isadmin). Click the appropriate tab to change the settings.
WEB: I your questions are not addressedhere, reer to the Linksys website,www.linksysbycisco.com
8/7/2019 linksys home router Manual
28/50
Appendix B Specifications
24Wireless-G Home Router with SpeedBurst
Appendix B:SpecificationsModel WRT54GH
Standards IEEE 802.3, IEEE 802.3u,IEEE 802.11g, IEEE 802.11b
Ports Power, Internet, Ethernet (1-4)
Buttons Power, Reset
LEDs Power, Internet, Wireless,Ethernet (1-4)
Modulations 802.11b: CCK, QPSK, BPSK802.11g: OFDM
RF Pwr (EIRP) in dBm 802.11g: Typ. 14 +/- 1.5 dBm @Normal Temp802.11b: Typ: 17.5 +/- 1.5 dBm @Normal Temp
Receive Sensitivityin dBm 1 Mbps: -93 Typical @ 8% PER
11 Mbps: -82 dBm Typical @8% PER54 Mbps: -68 dBm Typical @10% PER
# o Antennas One Internal PIFA Antenna
Antenna Gain in dBi PIFA
8/7/2019 linksys home router Manual
29/50
Appendix C Warranty Information
25Wireless-G Home Router with SpeedBurst
Appendix C:Warranty Information
Limited Warranty
FOR CONSUMERS WHO ARE COVERED BY CONSUMERPROTECTION LAWS OR REGULATIONS IN THEIR COUNTRYOF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OFRESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTYARE IN ADDITION TO ALL RIGHTS AND REMEDIESCONVEYED BY SUCH CONSUMER PROTECTION LAWS ANDREGULATIONS. THIS WARRANTY DOES NOT EXCLUDE,LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISINGOUT OF NONCONFORMITY WITH A SALES CONTRACT.SOME COUNTRIES, STATES AND PROVINCES DO NOTALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY OR CONDITION MAYLAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBEDBELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSOHAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE ORPROVINCE. THIS LIMITED WARRANTY IS GOVERNED BYAND CONSTRUED UNDER THE LAWS OF THE COUNTRY INWHICH THE PRODUCT PURCHASE TOOK PLACE.
Linksys warrants the hardware in this Linksys productagainst deects in materials and workmanship undernormal use or the Warranty Period, which begins on thedate o purchase by the original end-user purchaser and
lasts or the period speciied below: One (1) year or new product
Ninety (90) days or reurbished product
Your exclusive remedy and Linksys entire liability underthis limited warranty will be or Linksys, at its option, to(a) repair the product with new or reurbished parts,(b) replace the product with a reasonably availableequivalent new or reurbished Linksys product, or (c)reund the purchase price o the product less any rebates.Any repaired or replacement products will be warrantedor the remainder o the original Warranty Period or thirty(30) days, whichever is longer. All products and parts that
are replaced become the property o Linksys.
Linksys additionally warrants that any media on whichthe sotware may be provided will be ree rom deects inmaterials and workmanship under normal use or a periodo ninety (90) days rom the date o original purchase.Your exclusive remedy and Linksys entire liability underthis limited warranty will be or Linksys, at its option, to(a) replace the sotware media, or (b) reund the purchaseprice o the sotware media.
Exclusions and Limitations
This limited warranty does not apply i: (a) the productassembly seal has been removed or damaged, (b) theproduct has been altered or modiied, except by Linksys,(c) the product damage was caused by use with non-Linksys products, (d) the product has not been installed,operated, repaired, or maintained in accordance withinstructions supplied by Linksys, (e) the product hasbeen subjected to abnormal physical or electrical stress,misuse, negligence, or accident, () the serial number onthe Product has been altered, deaced, or removed, or (g)the product is supplied or licensed or beta, evaluation,testing or demonstration purposes or which Linksys doesnot charge a purchase price or license ee.
EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SETFORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTEDBY APPLICABLE LAW, ALL SOFTWARE AND SERVICESPROVIDED BY LINKSYS WITH THE PRODUCT, WHETHER
FACTORY LOADED ON THE PRODUCT OR CONTAINED ONMEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED ASIS WITHOUT WARRANTY OF ANY KIND. Without limitingthe oregoing, Linksys does not warrant that the operationo the product, sotware or services will be uninterruptedor error ree. Also, due to the continual developmento new techniques or intruding upon and attackingnetworks, Linksys does not warrant that the product,sotware or services, or any equipment, system or networkon which the product, sotware or services are used willbe ree o vulnerability to intrusion or attack. The productmay include or be bundled with third party sotware orservice oerings. This limited warranty shall not apply tosuch third party sotware or service oerings. This limitedwarranty does not guarantee any continued availabilityo a third partys service or which this products use oroperation may require.
TO THE EXTENT NOT PROHIBITED BY APPLICABLELAW, ALL IMPLIED WARRANTIES AND CONDITIONSOF MERCHANTABILITY, SATISFACTORY QUALITY ORFITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TOTHE DURATION OF THE WARRANTY PERIOD. ALL OTHEREXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONSAND WARRANTIES, INCLUDING BUT NOT LIMITED TOANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE
DISCLAIMED.
TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, INNO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA,REVENUE OR PROFIT, LOSS OF THE ABILITY TO USE ANYTHIRD PARTY PRODUCTS, SOFTWARE OR SERVICES, ORFOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTALOR PUNITIVE DAMAGES, REGARDLESS OF THE THEORYOF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUTOF OR RELATED TO THE USE OF OR INABILITY TO USETHE PRODUCT, SOFTWARE OR ANY SERVICES PROVIDEDIN RESPECT OF SUCH PRODUCT, SOFTWARE OR SERVICE,EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY
8/7/2019 linksys home router Manual
30/50
Appendix C Warranty Information
26Wireless-G Home Router with SpeedBurst
OF SUCH DAMAGES. TO THE EXTENT NOT PROHIBITED BYAPPLICABLE LAW, IN NO EVENT WILL LINKSYS LIABILITYEXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.The oregoing limitations will apply even i any warrantyor remedy provided under this limited warranty ails o itsessential purpose.
No Linksys employee, agent or reseller is authorized tomake any verbal or written modiication, extension oraddition to this warranty, and Linksys expressly disclaimsany such change to this warranty. I any portion o thislimited warranty is ound to be void or unenorceable, itsremaining provisions shall remain in ull orce and eect.
Obtaining Warranty Service
I you have a question about your productor experience a problem with it, please go towww.linksysbycisco.com/support where you will ind avariety o online support tools and inormation to assist
you with your product. I the product proves deectiveduring the Warranty Period, contact Linksys TechnicalSupport (or, i you purchased your product rom a serviceprovider, contact the service provider) or instructions onhow to obtain warranty service. The telephone numberor Linksys Technical Support in your area can be oundby clicking the Contact Us link on the home page owww.linksysbycisco.com. Have your product serialnumber and proo o purchase on hand when calling. ADATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TOPROCESS WARRANTY CLAIMS. I you are requested toreturn your product, you will be given a Return MaterialsAuthorization (RMA) number. You are responsible or
properly packaging and shipping your product at yourcost and risk. You must include the RMA number anda copy o your dated proo o original purchase whenreturning your product. Products received without aRMA number and dated proo o original purchase willbe rejected. Do not include any other items with theproduct you are returning. Deective product coveredby this limited warranty will be repaired or replaced andreturned to you without charge. Customers outside othe United States o America and Canada are responsibleor all shipping and handling charges, custom duties,VAT and other associated taxes and charges. Repairs orreplacements not covered under this limited warranty willbe subject to charge at Linksys then-current rates.
Technical Support
This limited warranty is neither a service nor asupport contract. Inormation about Linksys currenttechnical support oerings and policies (includingany ees or support services) can be ound atwww.linksysbycisco.com/support.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,CA 92623.
8/7/2019 linksys home router Manual
31/50
Appendix D Regulatory Information
27Wireless-G Home Router with SpeedBurst
Appendix D:Regulatory Information
FCC Statement
This device complies with Part 15 o the FCC Rules.Operation is subject to the ollowing two conditions: (1)This device may not cause harmul intererence, and (2) thisdevice must accept any intererence received, includingintererence that may cause undesired operation.
This product has been tested and complies with thespeciications or a Class B digital device, pursuant to Part15 o the FCC Rules. These limits are designed to providereasonable protection against harmul intererence ina residential installation. This equipment generates,uses, and can radiate radio requency energy and, i notinstalled and used according to the instructions, maycause harmul intererence to radio communications.However, there is no guarantee that intererence will notoccur in a particular installation. I this equipment doescause harmul intererence to radio or television reception,which is ound by turning the equipment o and on, theuser is encouraged to try to correct the intererence byone or more o the ollowing measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment ordevices
Connect the equipment to an outlet other than the
receivers
Consult a dealer or an experienced radio/TV technicianor assistance
FCC Caution: Any changes or modiications not expresslyapproved by the party responsible or compliance couldvoid the users authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposurelimits set orth or an uncontrolled environment. Thisequipment should be installed and operated with
minimum distance 20 cm between the radiator and yourbody.
This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. IEEE802.11b or 802.11g operation o this product in the USA isirmware-limited to channels 1 through 11.
Saety Notices
WARNING: Do not use this product near water,or example, in a wet basement or near aswimming pool.
WARNING: Avoid using this product during anelectrical storm. There may be a remote risk oelectric shock rom lightning.
WARNING: This product contains lead, knownto the State o Caliornia to cause cancer, andbirth deects or other reproductive harm. Washhands ater handling.
Industry Canada StatementThis Class B digital apparatus complies with CanadianICES-003 and RSS210.
Operation is subject to the ollowing two conditions:
1. This device may not cause intererence and
2. This device must accept any intererence, includingintererence that may cause undesired operation othe device.
Industry Canada Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set orth or an uncontrolled environment. This equipmentshould be installed and operated with minimum distance20 cm between the radiator & your body.
This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
8/7/2019 linksys home router Manual
32/50
Appendix D Regulatory Information
28Wireless-G Home Router with SpeedBurst
Avis dIndustrie Canada
Cet appareil numrique de la classe B est conorme auxnormes NMB-003 et RSS210 du Canada.
Lutilisation de ce dispositi est autorise seulement auxconditions suivantes :
1. il ne doit pas produire de brouillage et
2. il doit accepter tout brouillage radiolectrique reu,mme si ce brouillage est susceptible de compromettrele onctionnement du dispositi.
Avis dIndustrie Canada concernant lexposition
aux radiorquences :
Ce matriel est conorme aux limites tablies par ICen matire dexposition aux radiorquences dans unenvironnement non contrl. Ce matriel doit tre installet utilis une distance dau moins 20 cm entre lantenne
et le corps de lutilisateur.Lmetteur ne doit pas tre plac prs dune autre antenneou dun autre metteur, ou onctionner avec une autreantenne ou un autre metteur.
Wireless Disclaimer
The maximum perormance or wireless is derived romIEEE Standard 802.11 speciications. Actual perormancecan vary, including lower wireless network capacity,data throughput rate, range and coverage. Perormance
depends on many actors, conditions and variables,including distance rom the access point, volume onetwork traic, building materials and construction,operating system used, mix o wireless products used,intererence and other adverse conditions.
Avis de non-responsabilit concernant les
appareils sans il
Les perormances maximales pour les rseaux sans ilsont tires des spciications de la norme IEEE 802.11.Les perormances relles peuvent varier, notammenten onction de la capacit du rseau sans il, du dbit
de la transmission de donnes, de la porte et de lacouverture. Les perormances dpendent de acteurs,conditions et variables multiples, en particulier de ladistance par rapport au point daccs, du volume du traicrseau, des matriaux utiliss dans le btiment et dutype de construction, du systme dexploitation et de lacombinaison de produits sans il utiliss, des interrenceset de toute autre condition davorable.
8/7/2019 linksys home router Manual
33/50
Appendix D Regulatory Information
29Wireless-G Home Router with SpeedBurst
User Inormation or Consumer Products
Covered by EU Directive 2002/96/EC on
Waste Electric and Electronic Equipment
(WEEE)
This document contains important inormation or userswith regards to the proper disposal and recycling oLinksys products. Consumers are required to comply withthis notice or all electronic products bearing the ollowingsymbol:
English - Environmental Information for Customers inthe European UnionEuropean Directive 2002/96/EC requires that the equipmentbearing this symbol on the product and/or its packaging mustnot be disposed o with unsorted municipal waste. The symbolindicates that this product should be disposed o separatelyrom regular household waste streams. It is your responsibility todispose o this and other electric and electronic equipment viadesignated collection acilities appointed by the government orlocal authorities. Correct disposal and recycling will help preventpotential negative consequences to the environment andhuman health. For more detailed inormation about the disposal
o your old equipment, please contact your local authorities,waste disposal service, or the shop where you purchased theproduct.
(Bulgarian) - 2002/96/EC , / , . , .
. . - , , .
etina (Czech) - Informace o ochran ivotnhoprosted pro zkaznky v zemch Evropsk unieEvropsk smrnice 2002/96/ES zakazuje, aby zazen oznaentmto symbolem na produktu anebo na obalu bylo likvidovnos netdnm komunlnm odpadem. Tento symbol udv,e dan produkt mus bt likvidovn oddlen od bnhokomunlnho odpadu. Odpovdte za likvidaci tohoto produktu
a dalch elektrickch a elektronickch zazen prostednictvmurench sbrnch mst stanovench vldou nebo mstnmiady. Sprvn likvidace a recyklace pomh pedchzetpotencilnm negativnm dopadm na ivotn prosted a lidskzdrav. Podrobnj inormace o likvidaci starho vybaven silaskav vydejte od mstnch ad, podniku zabvajcho selikvidac komunlnch odpad nebo obchodu, kde jste produktzakoupili.
Dansk (Danish) - Miljinformation for kunder i EUEU-direktiv 2002/96/EF krver, at udstyr der brer dette symbol
p produktet og/eller emballagen ikke m bortskaes somusorteret kommunalt aald. Symbolet betyder, at dette produkt
skal bortskaes adskilt ra det almindelige husholdningsaald.Det er dit ansvar at bortskae dette og andet elektrisk ogelektronisk udstyr via bestemte indsamlingssteder udpegeta staten eller de lokale myndigheder. Korrekt bortskaelseog genvinding vil hjlpe med til at undg mulige skader ormiljet og menneskers sundhed. Kontakt venligst de lokalemyndigheder, renovationstjenesten eller den butik, hvor duhar kbt produktet, angende mere detaljeret inormation ombortskaelse a dit gamle udstyr.
Deutsch (German) - Umweltinformation fr Kundeninnerhalb der Europischen UnionDie Europische Richtlinie 2002/96/EC verlangt, dass technische
Ausrstung, die direkt am Gert und/oder an der Verpackung mitdiesem Symbol versehen ist , nicht zusammen mit unsortiertemGemeindeaball entsorgt werden dar. Das Symbol weist darauhin, dass das Produkt von regulrem Haushaltmll getrenntentsorgt werden sollte. Es liegt in Ihrer Verantwortung, diesesGert und andere elektrische und elektronische Gerte berdie dar zustndigen und von der Regierung oder rtlichenBehrden dazu bestimmten Sammelstellen zu entsorgen.Ordnungsgemes Entsorgen und Recyceln trgt dazu bei,potentielle negative Folgen r Umwelt und die menschlicheGesundheit zu vermeiden. Wenn Sie weitere Inormationen zurEntsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte andie rtlichen Behrden oder stdtischen Entsorgungsdiensteoder an den Hndler, bei dem Sie das Produkt erworben haben.
8/7/2019 linksys home
Top Related