AstraL I G H T I N G
SAFESTEP LED
AstraL I G H T I N G
SAFESTEP Luminaire
2www.astralighting.co.uk
The Astra SAFESTEP luminaire is specifically designed for use in cleanrooms and clean areas such as in the pharmaceutical, food, micro-electronic and healthcare industries.
Aptly named, the SAFESTEP luminaires’ unique design integrates seamlessly into composite panel ceilings and provides walk-on protection, thus safeguarding personnel working above the ceiling.
With safety paramount in mind, the SAFESTEP luminaire removes potential trip hazards and the risk of falls from height, whilst also eliminating any need for boxes, cages or barriers that are often fitted on top of non-walkable luminaires.
Applications
• Pharmaceutical
• Biotechnology
• Life Sciences
• Semi-conductor
• Nanotechnology
• Laboratories
Features
• Flush integration into composite ceiling panels
• Available to suit 2'', 3'', 4'', 5'' and 6'' ceiling systems
• Available to suit walk-on grid ceilings
• Rear Access lift-off lid
• Dual Access with removable front and lift-off lid
• No visible fastener on the room side (rear access version)
• Safety First! Eliminates risk of falling from large heights
• Safety First! Eliminates potential trip hazards above the ceiling
• Minimal grooves and crevices for easy cleaning
2
AstraL I G H T I N G
SAFESTEP Luminaire
3www.astralighting.co.uk
Construction:
Fabrication: 16-gauge Z-profile, 18-gauge lid and 20-gauge housing from CRS. Welded construction with a durable Ral 9010 epoxy powder coat finish - 5 step pre-treatment. Salt spray test 1,000 hours.
Optics: High impact resistant Makrolon® opal polycarbonate diffusers with high light transmission and excellent lamp hiding providing a uniform appearance.
Gasket: EPDM closed cell gaskets seal-on lid and VHB adhesive bonding diffuser to front frame.
Specification:
Installation: For installation into 2'', 3'', 4'', 5'' and 6'' ceiling panel systems. Also available to suit a range of walk-on grid systems.
Photometrics: Photometry tested to IESNA LM-79-08 standards & EN13032:1.
Warranty: Limited five (5) year warranty.
Listings: Luminaire is certified to UL standards by MET laboratories Inc. UL1598 Standard for Safety Luminaires, UL 8750 Standard for Safety Light Emitting Diode (LED) Equipment for Use in Lighting.
Electrical:
120/277VAC, 50-60Hz electrical input with replaceable electronic constant current driver (<10% THD, >0.90 PF).
Electrical Connections:
Power supply - Internal Connections: As standard the luminaires are to be hard wired. This is by removing the luminaire lid and inserting the power supply cable through the cable gland entry. Internally there is a terminal bock for power, dimming and emergency options as required.
Power supply - Pre-wired Lead/Whip: Alternatively the luminaire can be supplied with lead/whip which is pre-wired to the luminaire and the opposite end of the lead can be prepared or fitted with a plug connector.
Power supply - External Connections: The luminaire is pre-wired with a walk-on PCB (power connection box) on the back of the lid. The PCB houses a panel mount connector for plug & play connections and is available in 3, 4, 5 & 6 poles to accommodate dimming and emergency versions.
Pre-wired leads to the length of your choice can be supplied to create a complete plug & play wiring system.
Internal Connections
Pre-wired Lead/Whip
Power Connection Box
AstraL I G H T I N G
SAFESTEP Luminaire
4www.astralighting.co.uk
Key Performance Indicators
LL/CW 142 - 156 Ra 80+
L90/B10 50K CCT 4800K
Life Expectancy (L70) > 100K Colour Consistency 3 SDCM
LL/CW: Luminaire Lumens per circuit watt - The efficiency of the luminaire including the electrical losses associated with the control gear and the reduced lumen output due to the light-transmission of the diffuser material.
L90/B10:These figures illustrate the life expectancy of the LED (e.g. 50K = 50,000 hour life expectancy) which is a combination of light output degradation (L90 = when the light output has reduced to 90% of its initial level) and lamp failure expectations (B10 = when 10% of the LEDs have failed to meet operational expectations.
Life Expectancy (L70):This figure illustrates the life expectancy of the LEDs at 100,000 hours as L70 (when the light output has reduced to 70% of it’s initial level).
Ra:‘Ra’ indicates the LED colour rendering index. We recommend Ra80 for working areas.
CCT (Colour Temperature):°K indicates colour temperature. We recommend 4000 - 5000K for working areas.
Colour Consistency:SDCM is an acronym which stands for Standard Deviation Colour Matching. SDCM has the same meaning as ‘MacAdam Ellipse’.
LED Specifications
Energy Saving
Technology
AstraL I G H T I N G
SAFESTEP Luminaire
5www.astralighting.co.uk
Anti-bacterial Coating:
Anti-bacterial powder coatings provide an active biocidal system based on silver, which is effective against major strains of bacteria. This provides long term protection against bacterial growth and is shown to exhibit zero growth for fungi and moulds. The coating delivers a constant and controlled release of Silver ions which remain active for periods in excess of 10 years. The active Silver ions penetrate the bacteria cell walls disrupting the cell and inhibiting bacterial growth.
How Anti-bacterial works
304/316 stainless steel:
Corrosion resistance of stainless steel varies by grade. The two most common stainless steel grades are 304 and 316. The key difference is the addition of molybdenum, an alloy which drastically enhances corrosion resistance, especially for more stringent environments. 316 stainless steel contains molybdenum, but 304 doesn’t.
Coating matrixActive ion carrier
Active ionsPenetrate the bacteria cell walls disrupting the cell and thereby inhibiting bacterial growth.
Bacteria
Moisture
Active ionsReleased under the action of moisture and difuse to the surface.
Chemical Resistant Coating:
For areas where aggressive cleaning and sterilisation chemicals such as VHP (vaporised hydrogen peroxide) are used, we can provide a specialist highly durable coating which is suitable for such environments.
Photosensitive:
Options are available for both yellow LEDs, providing protection up to 500nm and red LEDs with protection up to 620nm wavelengths. Twin switching enables both white light and red/yellow light from within one luminaire.
Options
AstraL I G H T I N G
SAFESTEP Luminaire
6www.astralighting.co.uk
Approvals:
A product with the MET Listed Mark is determined to have met the minimum requirements of prescribed safety standards as certified by a Nationally Recognized Testing Laboratory (NTRL). The mark also indicates that the manufacturers production site confirms to a range of compliance measures and is subject to regular inspections to verify continued conformance.
Rated to IP65/64 ingress protection for both water and dust.
Both 60598-2-2 :2012 and EN 60598-1 :2015 - Certified design and manufactured.
BS6399:1
BS 6399-1 :1996 - Minimum concentrated load of 0.9kN (200 lbs) as recommended for accidental walk-on protection. Uniform distributed load 2.5kN/m² (550 lbs).
Suitable for ISO 5, Class 100 Rated Rooms (FED STD 209E).
ISO 5Class 100
EN 60598
IP65
METUS
AstraL I G H T I N G
SAFESTEP Luminaire
7www.astralighting.co.uk
Resources:
Download product data sheets and technical support documents.
LDT files are available for lighting calculations.
Rivet files are available for BIM (Building Information Modelling).
Product installation instructions.
Operation and maintenance manual.
Product warranty.
Visit our website, www.astragroupuk.com, and register for on-line access to our product resources.
SAFESTEP Product Range AstraL I G H T I N G
8
SAFESTEP Composite Panel Rear Access
LED Options SuffixChoose LED lumen output from tableabove and select suffix L1 - L9 as required
L1 - L9
Add suffix as required i.e. SSCPRA6060MET/L1
Optics Options SuffixOpal Diffuser No suffix requiredT/Glass & Opal TGO
Add suffix as required i.e. SSCPRA6060MET/L1/TGO
Options SuffixIntegral 3 Hour Emergency EM3Anti-Bacterial Coating AB
Chemical Resistant Coating CRCAdd suffix as required i.e. SSCPRA6060MET/L1/TGO/DSI/EM3
HFD Options SuffixHF Dimmable DSI DSIHF Dimmable DALI DALI
Add suffix as required i.e. SSCPRA6060MET/L1/TGO/DSI
UV-Safety Options SuffixC20 400nm Protection C20LY5 470nm Protection LY5G10 520nm Protection G10
Add suffix as required i.e. SSCPRA6060MET/L1/TGO/DSI/EM3/C20
LED Power & L/lumensOrder Codes Dimensions L1 L2 L3 L4 L5 L6 L7 L8 L9
SSCPRA6060MET 2' x 2' 19.62w 21.58w 25.51w 29.43w 35.32w 47.09w 59.52w 73.26 82.41w(600 x 600) 3065lm 3355lm 3926lm 4485lm 5302lm 6854lm 8572lm 10439lm 11744lm
LL/CW 156.20 155.44 153.92 152.39 150.11 145.54 144.02 142.50 142.50SSCPRA1230MET 4' x 1' 23.55w 35.32w 47.09w 62.79w
(1200 x 300) 3642lm 5302lm 6854lm 9139lmLL/CW 154.68 150.11 145.54 145.54
LED IP65/64 Non-Modular recessed luminaire for composite panel ceilings
To specify state:
IP65/64 Non-Modular recessed luminaire for seamless integration into composite panel ceilings. Tested to BS 6399-1: 1996 . minimum concentrated load of 0.9kN as recommended for accidental walk-on protection. Sealed opal diffuser optics with option for 4mm toughened glass. Smooth front for easy cleaning, fully welded construction from corrosion resistant steel with durable epoxy powder coat finish. High efficiency LEDs and drivers mounted on a removable gear tray for ease of maintenance. – as Astra Lighting SAFESTEP Composite Panel Rear Access.LED
Wiring Options SuffixInternal connections No suffix required3 pole walk-on connection box 3PWCB4 pole walk-on connection box 4PWCB5 pole walk-on connection box 5PWCB6 pole walk-on connection box 6PWCB
Add suffix as required i.e. SSCPRA6060MET/L1/TGO/DSI/EM3/C20/3PWCB
Key Performance Indicators
LL/CW 142 - 156 Ra 80+
L90/B10 50K CCT 4800K
Life Expectancy (L70) > 100K Colour Consistency 3 SDCM
SAFESTEP Product Range AstraL I G H T I N G
9
Luminaire tested to BS 6399-1:1996. Minimum concentrated load of 0.9kN as recommended for accidental walk-on protection.
Uniform distributed load 2.5kN/m2.
SAFESTEP Composite Panel Rear AccessLED
D
E
Cut-out
A x B
C
D
E
Cut-out
A x B
C
LED Dimensions (in inches)Code A B C D E Cut-Out
SCPRA6060MET 25.35(644mm)
25.35(644mm)
2*(50mm)
26.42(671mm)
26.42(671mm)
23.82 x 23.82(605 x 605mm)
SSCPRA1230MET 14.69(373mm)
41.50(1054mm)
2*(50mm)
15.75(400mm)
42.56(1081mm)
13.11 x 39.96(333 x 1015mm)
* Luminaires available from 2 - 8'' (50-200mm) to suit panel ceiling.
Luminaire weights - 2' x 2' lb Kg
SSCPRA6060MET - 2'' depth 33lb 8oz 15.2SSCPRA6060MET - 4'' depth 37lb 1oz 16.8
Additional weight for TGO 7lb 12oz 3.5Additional weight for WCB 9.2oz 0.26
Luminaire weights - 4' x 1' lb Kg
SSCPRA1230MET - 2'' depth 35lb 8oz 16.1
SSCPRA1230MET - 4'' depth 38lb 13oz 17.6
Additional weight for TGO 7lb 4oz 3.3Additional weight for WCB 9.2oz 0.26
SAFESTEP Product Range AstraL I G H T I N G
10
SAFESTEP Composite Panel Dual Access
LED Options SuffixChoose LED lumen output from tableabove and select suffix L1 - L9 as required
L1 - L9
Add suffix as required i.e. SSCPDA6060MET/L1
Optics Options SuffixOpal Diffuser No suffix requiredT/Glass & Opal TGO
Add suffix as required i.e. SSCPDA6060MET/L1/TGO
Options SuffixIntegral 3 Hour Emergency EM3Anti-Bacterial Coating AB
Chemical Resistant Coating CRCAdd suffix as required i.e. SSCPDA6060MET/L1/TGO/DSI/EM3
HFD Options SuffixHF Dimmable DSI DSIHF Dimmable DALI DALI
Add suffix as required i.e. SSCPDA6060MET/L1/TGO/DSI
UV-Safety Options SuffixC20 400nm Protection C20LY5 470nm Protection LY5G10 520nm Protection G10
Add suffix as required i.e. SSCPDA6060MET/L1/TGO/DSI/EM3/C20
LED Power & L/lumensOrder Codes Dimensions L1 L2 L3 L4 L5 L6 L7 L8 L9
SSCPDA6060MET 2' x 2' 19.62w 21.58w 25.51w 29.43w 35.32w 47.09w 59.52w 73.26 82.41w(600 x 600) 3065lm 3355lm 3926lm 4485lm 5302lm 6854lm 8572lm 10439 11744lm
LL/CW 156.20 155.44 153.92 152.39 150.11 145.54 144.02 142.50 142.50SSCPDA1230MET 4' x 1' 23.55w 35.32w 47.09w 62.79w
(1200 x 300) 3642lm 5302lm 6854lm 9139lmLL/CW 154.68 150.11 145.54 145.54
LED IP65/64 Non-Modular recessed luminaire for composite panel ceilings
To specify state:
IP65/64 Non-Modular recessed luminaire for seamless integration into composite panel ceilings. Tested to BS 6399-1: 1996 . minimum concentrated load of 0.9kN as recommended for accidental walk-on protection. Sealed opal diffuser optics with option for 4mm toughened glass. Smooth front for easy cleaning, fully welded construction from corrosion resistant steel with durable epoxy powder coat finish. High efficiency LEDs and drivers mounted on a removable gear tray for ease of maintenance. – as Astra Lighting SAFESTEP Composite Panel Dual Access.LED
Wiring Options SuffixInternal connections No suffix required3 pole walk-on connection box 3PWCB4 pole walk-on connection box 4PWCB5 pole walk-on connection box 5PWCB6 pole walk-on connection box 6PWCB
Add suffix as required i.e. SSCPDA6060MET/L1/TGO/DSI/EM3/C20/3PWCB
Key Performance Indicators
LL/CW 142 - 156 Ra 80+
L90/B10 50K CCT 4800K
Life Expectancy (L70) > 100K Colour Consistency 3 SDCM
SAFESTEP Product Range AstraL I G H T I N G
11
Luminaire tested to BS 6399-1:1996. Minimum concentrated load of 0.9kN as recommended for accidental walk-on protection.
Uniform distributed load 2.5kN/m2.
D
E
Cut-out
A x B
C
LED Dimensions (in inches)Code A B C D E Cut-Out
SSCPDA6060MET 24.80(630mm)
24.80(630mm)
2*(50mm)
26.42(671mm)
26.42(671mm)
23.82 x 23.82(605 x 605mm)
SSCPDA1230MET 14.13(359mm)
40.95(1040mm)
2*(50mm)
15.75(400mm)
42.56(1081mm)
13.11 x 39.96(333 x 1015mm)
* Luminaires available from 2-8'' (50-200mm) to suit panel ceiling.
Luminaire weights - 2' x 2' lb Kg
SSCPDA6060MET - 2'' depth 37lb 15oz 17.2SSCPDA6060MET - 4'' depth 41lb 7oz 18.8
Additional weight for TGO 7lb 12oz 3.5Additional weight for WCB 9.2oz 0.26
Luminaire weights - 4' x 1' lb Kg
SSCPDA1230MET - 2'' depth 39lb 150z 18.1
SSCPDA1230MET - 4'' depth 43lb 40z 19.6
Additional weight for TGO 7lb 4oz 3.3Additional weight for WCB 9.2oz 0.26
SAFESTEP Composite Panel Dual AccessLED
D
E
Cut-out
A x B
C
Cut-out
A x B
C
SSCPRA
SSCPDA
SAFESTEP Product Range AstraL I G H T I N G
12
SAFESTEP T56 Grid Rear Access
LED Options SuffixChoose LED lumen output from tableabove and select suffix L1 - L9 as required
L1 - L9
Add suffix as required i.e. SSTG6060MET/L1
Optics Options SuffixOpal Diffuser No suffix requiredT/Glass & Opal TGO
Add suffix as required i.e. SSTG6060MET/L1/TGO
Options SuffixIntegral 3 Hour Emergency EM3Anti-Bacterial Coating AB
Chemical Resistant Coating CRCAdd suffix as required i.e. SSTG6060MET/L1/TGO/DSI/EM3
HFD Options SuffixHF Dimmable DSI DSIHF Dimmable DALI DALI
Add suffix as required i.e. SSTG6060MET/L1/TGO/DSI
UV-Safety Options SuffixC20 400nm Protection C20LY5 470nm Protection LY5G10 520nm Protection G10
Add suffix as required i.e. SSTG6060MET/L1/TGO/DSI/EM3/C20
LED Power & L/lumensOrder Codes Dimensions L1 L2 L3 L4 L5 L6 L7 L8 L9
SSTG6060MET 2' x 2' 19.62w 21.58w 25.51w 29.43w 35.32w 47.09w 59.52w 73.26 82.41w(600 x 600) 3065lm 3355lm 3926lm 4485lm 5302lm 6854lm 8572lm 10439 11744lm
LL/CW 156.20 155.44 153.92 152.39 150.11 145.54 144.02 142.50 142.50SSTG1230MET 4' x 1' 23.55w 35.32w 47.09w 62.79w
(1200 x 300) 3642lm 5302lm 6854lm 9139lmLL/CW 154.68 150.11 145.54 145.54
LED IP65/64 Modular recessed luminaire for T56 grid ceilings
To specify state:
IP65/64 Modular recessed luminaire for seamless integration into T56 grid ceilings. Tested to BS 6399-1: 1996 . minimum concentrated load of 0.9kN as recommended for accidental wall-on protection. Sealed opal Diffuser optics with option for 4mm toughened glass. Smooth front for easy cleaning, fully welded construction from corrosion resistant steel with epoxy powder coat finish. High efficiency LEDs and drivers mounted on a removable gear tray for ease of maintenance. – as Astra Lighting SAFESTEP T56 Grid Rear Access.LED
Wiring Options SuffixInternal connections No suffix required3 pole walk-on connection box 3PWCB4 pole walk-on connection box 4PWCB5 pole walk-on connection box 5PWCB6 pole walk-on connection box 6PWCB
Add suffix as required i.e. SSTG6060MET/L1/TGO/DSI/EM3/C20/3PWCB
Key Performance Indicators
LL/CW 142 - 156 Ra 80+
L90/B10 50K CCT 4800K
Life Expectancy (L70) > 100K Colour Consistency 3 SDCM
SAFESTEP Product Range AstraL I G H T I N G
13
LED Dimensions (in inches)Code A B C Grid Center
SSTG6060MET 23.43(595mm)
23.43(595mm)
2.76(70mm)
24.41 x 24.41(620 x 620mm)
SSTG1230MET 11.62(295mm)
47.05(1195mm)
2.76(70mm)
12.60 x 48.03(320 x 1220mm)
SAFESTEP T56 GridLED
Luminaire tested to BS 6399-1:1996. Minimum concentrated load of 0.9kN as recommended for accidental walk-on protection.
Uniform distributed load 2.5kN/m2.
Luminaire dimensions are to suit Astra T56 Grid and grid centres as shown below.
SAFESTEP T56 Grid
Kingsway House, 23A Marlborough Road, Lancing, West Sussex, BN15 8TRt: +44 (0) 1903 764 736 f: +44 (0) 1903 764 761 e: [email protected]
BS EN ISO 9001:2008 Certificate No: 14129639
www.astralighting.co.uk
AstraL I G H T I N G
I N N O VAT I O N I N T E G R I T Y
AstraC L E A N S Y S T E M S
P E R F O R M A N C E
AstraF I L T R A T I O N
Kingsway House, 23A Marlborough Road, Lancing, West Sussex, BN15 8TRt: +44 (0) 1903 764 736 f: +44 (0) 1903 764 761 e: [email protected]
BS EN ISO 9001:2008 Certificate No: 14129639
www.astracleansystems.com www.astralighting.co.ukwww.astrafiltration.com
Rev 156.MET.090817
Top Related