8/8/2019 Kerf 2009 Cabinet Catalog
1/20
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
2/20
KERF CABINETS
Our cabinets are truly custom; every cabinet is built to order in whatever size is needed for the project. You can
choose between maple and walnut veneered plywood for the basic cabinet construction. You can further
personalize your design with any combination of our 16 stock laminate colors. Finally, if you need a cabinet that
you don't see in our catalog, ask us and we will design something just for you.
We believe that our cabinets are the best built option on the market today. We use a high quality hardwood
veneer core plywood and our cases are assembeld using a unique intricate combination of dado and mortice and
tenon joinery. We use top of the line Blum hardware in our door and drawers, which open and close quietly and
smoothly.
Our DIY cabinets are built exactly the same as our shop built cabinets but they are packed flat in a crate and
shipped directly to you. All of the necessary hardware and screws are included in your kit. All you need is a screw
gun and some glue to build our DIY cabinets on-site. You complete the project by applying two coats of finish
(provided) on the edges of the plywood after the installation is complete (the faces of the plywood are pre-
finished).
In this catalog weve provided the basic building blocks for a Kerf kitchen. Weve separated our cabinets into
different categories: lower cabinets, upper cabinets and pantry combinations. Pricing is broken down between DIY
and shop built cabinets and whether you choose stainless steel or gray finished drawer hardware. We have listed
prices for each combination within a range of widths that are available for each cabinet. There are also 16
different colors of laminate that can be added to almost any spot and in any combination that you choose.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
3/20
LOWER CABINETS
DIMENSIONS
All lower cabinets are 24 deep and 34.5 tall. When a 1.5 thick countertop is applied, lower cabinets will be 36 in
overall height. We can change the height of the cabinet if you wish to have a different thickness for your
countertop at no extra charge.
LAMINATE
Colored laminate may be added to any door, drawer front or open cubby for the cost of $6/square foot.
MERGING
Lower cabinets can be merged together to create one larger cabinet, thereby eliminating the need for two panels
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
4/20
(ss) = stainless steel drawer hardware, (g) = gray drawer hardware
BASE100width" DIY Built (2 cookie sheet)
8-16 $610 $97517-24 $695 $1,080
BASE101width" DIY (ss) DIY (g) Built (ss) Built (g) (1 drawer, 1 cookie sheet)
8-16 $740 $700 $1,105 $1,06517-24 $825 $785 $1,210 $1,170
BASE102width" DIY (ss) DIY (g) Built (ss) Built (g) (1 drawer)24-36 $915 $845 $1,270 $1,200
Note:BASE102's dimensions can be customized to hold a microwave.
BASE103width" DIY (ss) DIY (g) Built (ss) Built (g) (1 trash pullout)
14 $780 $675 $1,040 $930
BASE104
width" DIY (ss) DIY (g) Built (ss) Built (g) (2 trash pullout)
20 $815 $705 $1,075 $965
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
5/20
(ss) = stainless steel drawer hardware, (g) = gray drawer hardware
BASE105width" DIY Built (1 door)
8-16 $520 $78017-24 $585 $855
BASE106width" DIY (ss) DIY (g) Built (ss) Built (g) (1 drawer, 1 door)
8-16 $705 $665 $1,010 $97017-24 $780 $740 $1,100 $1,060
BASE107width" DIY (ss) DIY (g) Built (ss) Built (g) (1 drawer, 2 doors)24-30 $1,020 $980 $1,430 $1,39031-36 $1,095 $1,055 $1,515 $1,475
BASE108
width" DIY Built (2 doors)24-32 $800 $1,14533-40 $870 $1,23041-48 $955 $1,325
BASE109
width" DIY (ss) DIY (g) Built (ss) Built (g) (2 drawers, 2 doors)24-32 $1,175 $1,095 $1,585 $1,50533-40 $1,270 $1,190 $1,700 $1,62041-48 $1,365 $1,285 $1,810 $1,730
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
6/20
(ss) = stainless steel drawer hardware, (g) = gray drawer hardware
BASE110width" DIY (ss) DIY (g) Built (ss) Built (g) (3 drawers)
8-16 $1,065 $900 $1,425 $1,26517-24 $1,125 $960 $1,500 $1,33525-36 $1,200 $1,040 $1,590 $1,430
BASE111width" DIY (ss) DIY (g) Built (ss) Built (g) (4 drawers)
8-16 $1,220 $1,030 $1,630 $1,44017-24 $1,280 $1,090 $1,705 $1,51525-36 $1,355 $1,165 $1,795 $1,605
BASE112
width" DIY (ss) DIY (g) Built (ss) Built (g) (4 drawers)24-36 $1,380 $1,180 $1,820 $1,620
BASE113
width" DIY (ss) DIY (g) Built (ss) Built (g) (3 drawers, 1 door)24-32 $1,385 $1,220 $1,885 $1,72033-40 $1,460 $1,295 $1,970 $1,81041-48 $1,520 $1,360 $2,045 $1,880
BASE114width" DIY (ss) DIY (g) Built (ss) Built (g) (6 drawers)32-40 $2,000 $1,675 $2,615 $2,29041-48 $2,060 $1,735 $2,690 $2,36049-56 $2,120 $1,795 $2,760 $2,43557-64 $2,180 $1,855 $2,835 $2,50565-72 $2,225 $1,900 $2,890 $2,565
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
7/20
(ss) = stainless steel drawer hardware, (g) = gray drawer hardware
BASE117width" DIY (ss) DIY (g) Built (ss) Built (g) (4 drawers, 1 door)24-32 $1,625 $1,420 $2,230 $2,02533-40 $1,685 $1,480 $2,300 $2,10041-48 $1,735 $1,530 $2,360 $2,155
BASE118width" DIY (ss) DIY (g) Built (ss) Built (g) (7 drawers)48-56 $2,375 $1,995 $3,115 $2,73557-64 $2,435 $2,055 $3,190 $2,81065-72 $2,485 $2,105 $3,245 $2,865
COOK001
width" DIY (ss) DIY (g) Built (ss) Built (g) (2 drawers)24-36 $1,015 $880 $1,345 $1,205
Note:COOK001 is built shorter to accommodate a cooktop. It will be custom fit to your appliance.This cabinet cannot be used in a pantry combination.
COOK002
width" DIY (ss) DIY (g) Built (ss) Built (g) (4 drawers)32-40 $1,675 $1,400 $2,175 $1,90041-48 $1,715 $1,440 $2,225 $1,95049-56 $1,765 $1,490 $2,285 $2,00557-64 $1,825 $1,550 $2,355 $2,08065-72 $1,890 $1,615 $2,440 $2,165
Note:COOK002 is built shorter to accommodate a cooktop. It will be custom fit to your appliance.This cabinet cannot be used in a pantry combination.
SINK003
width" DIY Built (2 doors)24-32 $685 $1,06533-40 $745 $1,14041-48 $795 $1,195
Note:SINK001 is designed to hold a kitchen sink.This cabinet cannot be used in a pantry combination.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
8/20
(ss) = stainless steel drawer hardware, (g) = gray drawer hardware
COR004door width" DIY Built (1 door, corner)
14-20 $875 $1,335
Note:COR004 is designed to fit in a corner.This cabinet cannot be used in a pantry combination.
COR005door width" DIY (ss) DIY (g) Built (ss) Built (g) (1 drawer, 1 door, corner)
14-20 $1,030 $990 $1,495 $1,455
Note:
COR005 is designed to fit in a corner.This cabinet cannot be used in a pantry combination.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
9/20
8/8/2019 Kerf 2009 Cabinet Catalog
10/20
UP200
width" DIY Built8-16 $275 $380
17-24 $285 $395
25-36 $330 $44037-48 $360 $475
49-60 $400 $52061-72 $430 $555
73-84 $525 $68085-96 $555 $710
Note:UP200's are typically 12" in height.
UP201width" DIY Built
12 $350 $590
UP202
width" DIY Built (2 doors)24-36 $490 $74037-48 $555 $820
Note:UP202 is intended to be used above an exhaust hood.
UP203
width" DIY Built (1 door, 2 int. shelves)
8-16 $425 $66517-24 $480 $730
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
11/20
UP204
width" DIY Built (1 door, 1 int. shelf)8-16 $470 $765
17-24 $530 $835
UP205width" DIY Built (2 doors. 4 int. shelves)24-32 $645 $96533-40 $740 $1,12541-48 $790 $1,180
UP206
width" DIY Built (2 doors, 3 int. shelves)24-32 $685 $1,06033-40 $735 $1,11541-48 $780 $1,170
UP207
width" DIY Built (2 doors, 2 int. shelves)24-32 $730 $1,15033-40 $775 $1,20541-48 $825 $1,265
UP208width" DIY Built (2 doors, 2 int. shelves)24-32 $730 $1,15033-40 $775 $1,20541-48 $825 $1,265
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
12/20
UP209
X+Y width" DIY Built30-36 $765 $1,23537-48 $830 $1,31049-60 $895 $1,390
Note:X or Y cannot exceed 30".
UP210
X+Y width" DIY Built30-36 $855 $1,38037-48 $920 $1,46049-60 $985 $1,535
Note:X or Y cannot exceed 30".
UP211door width" DIY Built (1 door, 2 int. shelves)
14-20 $625 $985
Note:Up 211 is designed to fit into a corner, please specify left (pictured) or right.
UP212door width" DIY Built (1 door, 1 int. shelf)
14-20 $640 $1,010
Note:Up 212 is designed to fit into a corner, please specify left (pictured) or right.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
13/20
PANTRY COMBINATIONS
DIMENSIONS
All pantry combinations are 24 deep and 90 tall.
CHOOSING A PANTRY COMBINATION
To make a pantry cabinet, choose a base (located in the lower cabinet section of this catalog), middle, and top.
Your three choices will then be merged together to create one 90 tall pantry cabinet. 70 tall oven cabinets are
also available combine oven cabinets with a to cabinet to make a com lete antr combination.
base112
mid301
top403
LAMINATE
Colored laminate may be added to any door, drawer front or open cubby for the cost of $6/square foot.
REFRIGERATOR CABINETS
Top-sections may be ordered separately for installation above a refrigerator. If you wish, you can order refrigerator
panels that extend to the floor from the top cabinet to cover the sides of the appliance. Refrigerator panels cost
$155 each.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
14/20
MID300
width" DIY Built8-16 $470 $735
17-24 $530 $805
MID301width" DIY Built (1 door)
8-16 $515 $78017-24 $585 $870
MID302
width" DIY Built (1 door, 2 int. shelves)8-16 $530 $795
17-24 $590 $870
MID303width" DIY Built (1 door. 2 int. shelves)24-36 $865 $1,290
MID304width" DIY Built (2 doors. 2 int. shelves)24-36 $940 $1,420
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
15/20
MID305
width" DIY Built (2 doors, 4 int. shelves)24-36 $900 $1,320
MID306width" DIY Built (2 doors)24-36 $955 $1,435
Note:MID306's dimensions can be customized to fit your microwave
TOP400width" DIY Built
8-16 $360 $60017-24 $390 $63525-36 $450 $705
Note:Add a frig. panel for $155 ea.
TOP401width" DIY Built (1 door)
8-16 $400 $64517-24 $445 $700
25-36 $530 $800
Note:Add a frig. panel for $155 ea.
TOP402width" DIY Built17-24 $445 $70025-36 $505 $770
Note:Add a frig. panel for $155 ea.
TOP403width" DIY Built (1 door)17-24 $515 $83025-36 $600 $930
Note:Add a frig. panel for $155 ea.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
16/20
(g) = gray drawer hardware, (ss) = stainless steel hardware.
TOP404width" DIY Built (2 doors)17-24 $500 $76025-36 $585 $865
Note:Add a frig. panel for $155 ea.
OVEN500
width" DIY (ss) DIY (g) Built (ss) Built (g) (2 ovens, 1 drawer)30 $1,110 $1,040 $1,540 $1,470
Note:OVEN500's dimensions can be customized to fit your double oven.
OVEN501
width" DIY (ss) DIY (g) Built (ss) Built (g) (1 oven, 2 drawers)30 $1,440 $1,300 $1,940 $1,800
Note:OVEN501's dimensions can be customized to fit your oven.
OVEN502
width" DIY (ss) DIY (g) Built (ss) Built (g) (1 oven, 2 drawers, 1 door)30 $1,495 $1,355 $2,005 $1,865
Note:OVEN502's dimensions can be customized to fit your oven.
OVEN503width" DIY (ss) DIY (g) Built (ss) Built (g) (1 oven, 2 drawers, 2 doors)
30 $1,535 $1,400 $2,050 $1,915
Note:OVEN503's dimensions can be customized to fit your oven.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
17/20
VANITIES
DIMENSIONS
All vanities are 22" deep. Standard measurements are specified in the following cabinets. However, we can
customize each vanity to fit your specific requirements.
WALL-MOUNTED VANITIES
Backs of wall-mounted vanities are 3/4" thick and securely engineered into the vanity. To hang the vanity, screw
directly through the back of the cabinet and into the wall.
LAMINATE
Colored laminate may be added to any door, drawer front or open cubby for the cost of $6/square foot.
LEG OPTIONS
On our full hei ht vanities choose between two st les: a toe kick or metal le s with ad ustable feet.
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
18/20
8/8/2019 Kerf 2009 Cabinet Catalog
19/20
PRICING EXAMPLE
Maple cabinets with some laminated panels shown above.
(ss) = stainless steel drawe hardware, (g) = gray drawer hardware
width" DIY (ss) DIY (g) Built (ss) Built (g) laminateLOWERS
A) sink001 36 $685 $685 $1,065 $1,065 $0B) base110 24 $1,125 $960 $1,500 $1,335 $17C) cor004 16 (door) $875 $875 $1,335 $1,335 $0D) cook001 24 $1,015 $880 $1,345 $1,205 $0
E) base108 24 $800 $800 $1,145 $1,145 $0F) base106 12 $705 $665 $1,010 $970 $0
PANTRIESG) base112 24 $1,380 $1,180 $1,820 $1,620 $5
mid301 " $585 $585 $870 $870 $0top403 " $515 $515 $830 $830 $40
H) base113 36 $1,460 $1,295 $1,970 $1,810 $30mid306 " $955 $955 $1,435 $1,435 $62top403 " $600 $600 $930 $930 $15
UPPERSI) up201 12 $350 $350 $590 $590 $32J) up203 12 $425 $425 $665 $665 $24
K) up210 X+Y= 36 $855 $855 $1,380 $1,380 $32L) up202 24 $490 $490 $740 $740 $0
M) up207 36 $775 $775 $1,205 $1,205 $87
subtotal: $13,595 $12,890 $19,835 $19,130 $344TOTAL w/ laminate: $13,939 $13,234 $20,179 $19,474
Kerf Cabinet Catalog 2009 www.kerfdesign.com
8/8/2019 Kerf 2009 Cabinet Catalog
20/20
ORDERING
ORDERSOrders can be initiated by telephone, fax, or email. Please include a list of cabinets that you have chosen, the
type of plywood, the type of hardware, the width of each piece, and your estimated laminate cost. A floor plan
and/or photos of the space is also very helpful. After we receive your order we will send you a laminate and
veneer sample kit to help you specify colors and finishes. Next we will work with you to create a 3D rendering of
your project. Once your plan is worked out and you have signed off on the drawings it takes about 4-6 weeks to
produce your DIY cabinet kit.
tel. (206) 954-8677
fax (206) 284-3092
email: [email protected]
TERMS
We ask for a 10% deposit based on the initial estimate for your project before we begin work on your design.During the design process it is possible for the price of the job to change. We will keep you informed of any
changes that will have a significant impact on the price. Once a final design is reached we require a 40%
payment to begin construction, and a second 40% payment when we are ready to ship your project. The final
balance, about 10%, is due when you have assembled the cabinets and are satisfied with the result. We accept
personal checks, VISA, MasterCard, and American Express.
SHIPPING
We crate your project and ship via freight. Typical transit time is 3-5 days. Deliveries are curbside unless other
arrangements are made prior to delivery. If you require any additional services (inside delivery, unpacking and
disposal of the crates, etc.) please let us know before we ship and we will make the arrangements.
Kerf Cabinet Catalog 2009 www kerfdesign com
Top Related