JOSEF EMMERICH PUMPENFABRIK GMBH D-53506 Hönningen-Liers/Ahr

_______________________________________________________________________________________________________________________________________________________________________

Geschäftsführer: Reiner Arenz Registergericht Andernach Nr. B. 377 www.EMMERICH-Pumpenfabrik.de TKM-Info_GB.doc

[m3/h] 50 60 70 80 90 100 150 200 250 300 350 400

3 - cylinder, single - actingTKM1200

TKM1000TKM900

TKM800TKM700

TKM600TKM500

TKM1500

MaterialsMaterialsMaterialsMaterials:::: Cast-iron Cast-iron rubber-lined Various stainless steel

Capacities:Capacities:Capacities:Capacities: 0,5 ... 400 m³/h

Pressure:Pressure:Pressure:Pressure: 1,6 MPa (16 bar) as standard design, higher pressures acc. project requirements

Temperature of pumped material:Temperature of pumped material:Temperature of pumped material:Temperature of pumped material: Up to 100°C as standard design, higher temperatures on demand

Field of application:Field of application:Field of application:Field of application: Pumping of abrasive and aggressive materials. Very gentle pumping of materials sensitive to shear

Remark:Remark:Remark:Remark: The well-tried „TKM“–model (Triplex-Kolben-Membranpumpe)! produces nearly half of the pulsation compared to a 2-cylinder quadruple-acting piston diaphragm pump. This is the basis for an extremely quit operation of the pump.

Constructional features:Constructional features:Constructional features:Constructional features:

Electrically driven modular Piston Diaphragm Pump

Pump head made of various metal materials

Diaphragm pulsation dampener

Double diaphragm

Internal adjustment of pressure and quantity in dependence to the discharge pressure

Inspection opening for diaphragm and valves

Picture 1 Crankshaft gear Picture 2 TKM500 Picture 3 TKM900