Corporate Headquarters
301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
Asset Sales (Canada) Inc.
4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5
Tel 902.852.5331 Fax 704.821.4325
Asset Sales, Inc.
JACK HECKMAN TUBE COMPANY TUBE BENDING, FABRICATION & WELDING
851 VICTOR HILL ROAD – GREER, SC 29651
WEDNESDAY, FEBRUARY 27TH @ 10:00 A.M. EST
MFG DATE
OR SPEC
MFG
DATE OR
SPEC
MFG
DATE OR
SPEC
European Headquarters
Unit 7, Branxholme Industrial Estate, Bradford Road,
Brighouse, West Yorkshire, HD6 4EA, England, UK
Tel 1484.401.906 Fax 1484.715.327
2006 2006
2007
2005
RAND-BRIGHT TUBE POLISHING CYLINDRICAL FINISHING SYSTEM
LINCOLN CYCLOMATIC SUB ARC/TABLE SEAM WELDER ROLLING H-FRAME PRESS STRAIGHTENING TABLE
2008 2001
2007
2004
BY ORDER OF THE BANKRUPTCY COURT
Inspection: TUESDAY, FEBRUARY 26TH FROM 8:00 A.M. – 4:00 P.M. EST
TELEDYNE PINES #2A TUBE BENDER
LIKE
NEW
EXCELLENT EXCELLENT
(4) TUBE BENDERS TELEDYNE PINES #2A Tube Bender with 3” OD Capacity, Auto Mandrel Extractor, Retract-
Clamp / Unclamp, NC Bender Control
TELEDYNE PINES #2 Tube Bender with 3” OD Capacity, Mandrel Extractor, NC Bender
Control, sn:11235-88146
TELEDYNE PINES #4A Tube Bender with 4” OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, Counter Clockwise Bending Rotation, 30” Maximum Radius of Bend, NC Bender
Control, sn:11435-65247
TELEDYNE PINES #4 Tube Bender with 4’ OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, NC Bender Control, sn:11435-59006
Various Bending Dies and Parts for Tube Benders
END FINISHING MACHINE TELEDYNE PINES Model 662 Beveler / Pneumatic End Finishing Machine with 3” O.D.
Capacity, sn:66250-73382
TUBE POINTER GEORGE MITCHELL Hydraulic Tube Push Pointer with Maximum Tube size 4-1/2” OD,
Maximum Travel of Dies 16”, Number of Dies (2), 10” Maximum Point Length, sn:PP-228
TUBE POLISHING FINISHING SYSTEM RAND-BRIGHT Model HD-300 Tube Polishing Cylindrical Finishing System with Maximum Part
Size 4-1/2” OD, 16” x 4” Maximum Polishing Wheel Diameter, Single Head, Turns, Rolls &
Polishes Tubing, Torit Dust Collector System, sn:300-218HD300
SWAGE MACHINE PARKER HANNIFIN Model C2LS33 Press Swaging Machine with 8.00 Bore, 6.00 Stroke, 25HP,
Clamp Positioner, Swage-Cylinders, sn:FJ68473
4-POST PRESS DAKE Model 927187 100 Ton Platen Press with 3’ x 6’ Work Area, sn:149167
H-FRAME PRESS Approx. 50 Ton H-Frame Press with 5HP
ROLLING H-FRAME PRESS/STRAIGHTNER Rolling H-Frame Press Straightening Table with Hydraulic Pump and Enerpac Cylinders Unit,
Approx. 35’ x 9’ Steel Table
INDUCTION HEATER PILLAR Model AB4660-22 Induction Heater with 50KW, 460 Volt, 10 KHZ Maximum Output,
sn:33162PU
SAWS EVERETT #20 Chop Saw, sn:2100
DORINGER Model D350 Cold Saw, sn:24958
MARVEL Horizontal Band Saw Model 15/7 with In feed and Out feed, sn:E-151994W
DOALL Approx. 10” x 12” Capacity Horizontal Bandsaw with 1-1/2” Blade
AIR COMPRESSOR KAESER Model AS47 Air Compressor with 40HP, 100-190 PSIG, 135-175 CFM (parts only
missing motor)
KAESER Model TC44 Air Dryer
GARDNER DENVER Air Compressor with 200 PSI, sn:M3839
ACORN PLATES/WELDING TABLES (3) ACORN 5’ x 10’ Welding Tables
HOPPERS (3) Self Dumping Hoppers
SAND BLASTER CLEMCO Model 2024 Sand Blaster Series 2000 with 6.OCP, sn:31044, mfg.2000
SUB ARC/SEAM WELDER LINCOLN Cyclomatic Sub Arc/Table Seam Welder with Cyclomatic Seam Tracker System,
In/Out and Front/Back Welders, NA-5 Lincoln Welders, Approximately 55’ Long Capacity with
Two Lincoln Ideal Arc DC-1000 Welding Power Source, sn:U1080704888
FORKLIFTS TOYOTA Forklift Model 6FGU35 with LP Gas, Side Shift, sn:60664
TOYOTA Forklift Model 7FGU35 with LP Gas, Side Shift, sn:63434
SCRAP All Metals, Plate, Round Tube, Shelving, Racks, Solid Metal Tube, Hollow Tube, Flat Steel, Steel
Racking
WELDING/PLASMA THERMAL DYNAMICS Plasma Welder Pakmaster 100 XLP, mfg.2005
(21) LINCOLN WELDERS - Precision Tig 375 Model K1833-l, sn:U1040717007 ● Power Mig
255c Model K2416-2, sn:U1061003909 ● Power Mig 255c Model K2416-2, sn:U1070415702 ●
Ideal Arc CV300 with wire, sn:A6P42596 ● Ideal Arc DC250 with wire, sn:A796074 ● Ideal Arc
CV300 with wire, sn:U1010503641 ● Precision Tig 275 with Dynaflex, sn:U1011201806 ● Ideal
ArcTig 300/300 with Dynaflex, sn:AC827480 ● Ideal Arc Tig 300/300, sn:804265 ● Power Mig
255C, sn:U1061003905 ● Precision Tig 275 with Dynaflex, sn:U1041112564 ● Precision Tig
275 with Dynaflex, sn:U102033514 ● Precision Tig 275 with Dynaflex, sn:1041201805 ●
Precision Tig 275 with Dynaflex, sn:U1010701023 ● Precision Tig 275 with Dynaflex,
sn:101120081 ● Precision Tig 275 with Dynaflex, sn:10111025336 ● Square Tig 275,
sn:U1010701792 ● CV300, sn:U1991011176 ● Ideal Arc 400, sn:AC655023 ● Ideal Arc 300,
sn:AC620637 ● Ideal Arc 250, sn:AC10100200047
Miscellaneous Welding Parts & Accessories
MISCELLANEOUS Rack and Contents of Jigs and Fixtures, Horses, Welding Flux, 3 Spreading Bars, Preston
Easton Tank Turing Rolls, Office Equipment, HP Plotter, Raw Material, Stand Alone Office and
Contents, Fans, Ladders, Chains, Slings, Hand Tools, Power Tools, Large Qty. Steel Tables and
Miscellaneous Scrap Outside, Welders, Forklift Booms, Contents of Cage (inside and outside),
Come-A-Longs, Enerpac, Tool Boxes, Rod Ovens, Track Burner, Jet Drill Press, Rack of
Contents and Dies, Shop Press, Metal Works Roller, Straps, Metal Tables and Carts, Sump
Pump, Bugo Systems, Jack & Pipe Stands, Pipe Beveler, Torch Rings, Lab Equipment, Pallets,
Pallet Jacks
1 of 3
1 of 4
1 of 2
BANKRUPTCY CASE NUMBER 12-05050-HB
55’
TRAVEL
2
RAND-BRIGHT TUBE POLISHING CYLINDRICAL FINISHING SYSTEM
AUCTION SALE DATE & TIME – WEDNESDAY, FEBRUARY 27th @ 10:00 A.M. EST
EXCELLENT
Want to Sell Your Shop or Know Someone
Who Does? Call Us Toll Free at
(888) 800-4442! We Pay Great Finder’s Fees!
Can’t Attend the Sale, but Still
Want to Bid?
Visit www.asset-sales.com
for More Bidding Options!
AMADA MODEL PEGA 345-K PEGA KING CNC TURRET PUNCH
TELEDYNE PINES #2A TUBE BENDER
VARIOUS
BENDING
DIES
1 of 2
2005
2007
2008 2001
WWW.ASSET-SALES.COM
ATTENDING THE AUCTION IN PERSON?
What you need to Bring…
•Your Drivers License
•Business Card
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be
Paying via Company Check.
2008
50
TAPER
50
TAPER
TELEDYNE PINES BEVELER
AMADA MODEL PEGA 344-Q PEGA QUEEN CNC TURRET PUNCH
AMADA MODEL VIPROS 255 CNN TURRET PUNCH
AMADA MODEL PEGA 344-Q PEGA QUEEN CNC TURRET PUNCH
AMADA MODEL VIPROS 255 CNN TURRET PUNCH
AMADA MODEL PEGA 344-Q PEGA QUEEN CNC TURRET PUNCH
(4) TUBE BENDERS TELEDYNE PINES #2A Tube Bender with 3” OD
Capacity, Auto Mandrel Extractor, Retract-Clamp /
Unclamp, NC Bender Control
TELEDYNE PINES #2 Tube Bender with 3” OD
Capacity, Mandrel Extractor, NC Bender Control,
sn:11235-88146
TELEDYNE PINES #4A Tube Bender with 4” OD
Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, Counter Clockwise Bending
Rotation, 30” Maximum Radius of Bend, NC
Bender Control, sn:11435-65247
TELEDYNE PINES #4 Tube Bender with 4” OD
Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, NC Bender Control, sn:11435-
59006
Various Bending Dies and Parts for Tube Benders
END FINISHING MACHINE TELEDYNE PINES Model 662 Beveler /
Pneumatic End Finishing Machine with 3” O.D.
Capacity, sn:66250-73382
TUBE POLISHING FINISHING
SYSTEMS RAND-BRIGHT Model HD-300 Tube Polishing
Cylindrical Finishing System with Maximum Part
Size 8+” OD, 16” x 4” Maximum Polishing Wheel
Diameter, Single Head, Turns, Rolls & Polishes
Tubing, Torit Dust Collector System, sn:300-
218HD300
RAND-BRIGHT Model LD-35 Tube Polisher with
1/4” – 3” Diameter Capacity, 3” x 12”, Pop Head
Cylinder Option, sn:1095-2123, mfg.1996
(4) TUBE BENDERS TELEDYNE PINES #2A Tube Bender with 3” OD Capacity, Auto Mandrel Extractor, Retract-
Clamp / Unclamp, NC Bender Control
TELEDYNE PINES #2 Tube Bender with 3” OD Capacity, Mandrel Extractor, NC Bender
Control, sn:11235-88146
TELEDYNE PINES #4A Tube Bender with 4” OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, Counter Clockwise Bending Rotation, 30” Maximum Radius of Bend, NC Bender
Control, sn:11435-65247
TELEDYNE PINES #4 Tube Bender with 4’ OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, NC Bender Control, sn:11435-59006
Various Bending Dies and Parts for Tube Benders
END FINISHING MACHINE TELEDYNE PINES Model 662 Beveler / Pneumatic End Finishing Machine with 3” O.D.
Capacity, sn:66250-73382
TUBE POINTER GEORGE MITCHELL Hydraulic Tube Push Pointer with Maximum Tube size 4-1/2” OD,
Maximum Travel of Dies 16”, Number of Dies (2), 10” Maximum Point Length, sn:PP-228
TUBE POLISHING FINISHING SYSTEM RAND-BRIGHT Model HD-300 Tube Polishing Cylindrical Finishing System with Maximum Part
Size 4-1/2” OD, 16” x 4” Maximum Polishing Wheel Diameter, Single Head, Turns, Rolls &
Polishes Tubing, Torit Dust Collector System, sn:300-218HD300
RAND-BRIGHT Model LD-35 Tube Polisher with ¼” – 3” Diameter Capacity, 3” x 12”, Pop Head
Cylinder Option, sn:1095-2123, mfg.1996
SWAGE MACHINE PARKER HANNIFIN Model C2LS33 Press Swaging Machine with 8.00 Bore, 6.00 Stroke, 25HP,
Clamp Positioner, Swage-Cylinders, sn:FJ68473
4-POST PRESS DAKE Model 927187 100 Ton Platen Press with 3’ x 6’ Work Area, sn:149167
H-FRAME PRESS Approx. 50 Ton H-Frame Press with 5HP
INDUCTION HEATER PILLAR Model AB4660-22 Induction Heater with 50KW, 460 Volt, 10 KHZ Maximum Output,
sn:33162PU
SAWS EVERETT #20 Chop Saw, sn:2100
DORINGER Model D350 Cold Saw, sn:24958
MARVEL Horizontal Band Saw Model 15/7 with In feed and Out feed, sn:E-151994W
DOALL Approx. 10” x 12” Capacity Horizontal Bandsaw with 1-1/2” Blade
ROLLING H-FRAME PRESS/STRAIGHTNER Rolling H-Frame Press Straightening Table with Hydraulic Pump and Enerpac Cylinders Unit,
Approx. 35’ x 9’ Steel Table
AIR COMPRESSOR KAESER Model AS47 Air Compressor with 40HP, 100-190 PSIG, 135-175 CFM (parts only
missing motor)
KAESER Model TC44 Air Dryer
GARDNER DENVER Air Compressor with 200 PSI, sn:M3839
ACORN PLATES/WELDING TABLES (3) ACORN 5’ x 10’ Welding Tables
HOPPERS (3) Self Dumping Hoppers
SAND BLASTER CLEMCO Model 2024 Sand Blaster Series 2000 with 6.OCP, sn:31044, mfg.2000
SUB ARC/SEAM WELDER LINCOLN Cyclomatic Sub Arc/Table Seam Welder with Cyclomatic Seam Tracker System,
In/Out and Front/Back Welders, NA-5 Lincoln Welders, Approximately 55’ Long Capacity with
Two Lincoln Ideal Arc DC-1000 Welding Power Source, sn:U1080704888
FORKLIFTS TOYOTA Forklift Model 6FGU35 with LP Gas, Side Shift, sn:60664
TOYOTA Forklift Model 7FGU35 with LP Gas, Side Shift, sn:63434
SCRAP All Metals, Plate, Round Tube, Shelving, Racks, Solid Metal Tube, Hollow Tube, Flat Steel, Steel
Racking
WELDING/PLASMA THERMAL DYNAMICS Plasma Welder Pakmaster 100 XLP, mfg.2005
(21) LINCOLN WELDERS - Precision Tig 375 Model K1833-l, sn:U1040717007 ● Power Mig
255c Model K2416-2, sn:U1061003909 ● Power Mig 255c Model K2416-2, sn:U1070415702 ●
Ideal Arc CV300 with wire, sn:A6P42596 ● Ideal Arc DC250 with wire, sn:A796074 ● Ideal Arc
CV300 with wire, sn:U1010503641 ● Precision Tig 275 with Dynaflex, sn:U1011201806 ● Ideal
ArcTig 300/300 with Dynaflex, sn:AC827480 ● Ideal Arc Tig 300/300, sn:804265 ● Power Mig
255C, sn:U1061003905 ● Precision Tig 275 with Dynaflex, sn:U1041112564 ● Precision Tig
275 with Dynaflex, sn:U102033514 ● Precision Tig 275 with Dynaflex, sn:1041201805 ●
Precision Tig 275 with Dynaflex, sn:U1010701023 ● Precision Tig 275 with Dynaflex,
sn:101120081 ● Precision Tig 275 with Dynaflex, sn:10111025336 ● Square Tig 275,
sn:U1010701792 ● CV300, sn:U1991011176 ● Ideal Arc 400, sn:AC655023 ● Ideal Arc 300,
sn:AC620637 ● Ideal Arc 250, sn:AC10100200047
Miscellaneous Welding Parts & Accessories
MISCELLANEOUS Rack and Contents of Jigs and Fixtures, Horses, Welding Flux, 3 Spreading Bars, Preston
Easton Tank Turing Rolls, Office Equipment, HP Plotter, Raw Material, Stand Alone Office and
Contents, Fans, Ladders, Chains, Slings, Hand Tools, Power Tools, Large Qty. Steel Tables and
Miscellaneous Scrap Outside, Welders, Forklift Booms, Contents of Cage (inside and outside),
Come-A-Longs, Enerpac, Tool Boxes, Rod Ovens, Track Burner, Jet Drill Press, Rack of
Contents and Dies, Shop Press, Metal Works Roller, Straps, Metal Tables and Carts, Sump
Pump, Bugo Systems, Jack & Pipe Stands, Pipe Beveler, Torch Rings, Lab Equipment, Pallets,
Pallet Jacks
TELEDYNE PINES #2 TUBE BENDER
TELEDYNE PINES #4 TUBE BENDER TELEDYNE PINES #4A TUBE BENDER
1 of 4
1 of 4
4 AVAILABLE
MACHINERY INSPECTION DATE & TIMES – TUESDAY, FEBRUARY 26th FROM 8:00 A.M. – 4:00 P.M. EST
DAKE MODEL 927187 100 TON
PLATEN PRESS
H-FRAME PRESS PARKER HANNIFIN MODEL C2LS33
PRESS SWAGING MACHINE
Can’t Attend the Sale? Register on Bidspotter.com to Bid Live Online in this Auction!!
(888) 800-4442
3
2001 2003 2004
2000 2007
GEORGE MITCHELL HYDRAULIC TUBE PUSH POINTER
WWW.ASSET-SALES.COM
EXCELLENT 15”
CHUCK
OVER
1000
LOTS
ROLLING H-FRAME PRESS STRAIGHTENING TABLE
Can’t Attend the Sale, but Still Want to
Bid? Visit www.asset-sales.com
for More Bidding Options!
TUBE POINTER GEORGE MITCHELL Hydraulic Tube Push Pointer with Maximum Tube size 4-1/2” OD,
Maximum Travel of Dies 16”, Number of Dies (2), 10” Maximum Point Length, sn:PP-228
SWAGE MACHINE PARKER HANNIFIN Model C2LS33 Press Swaging Machine with 8.00 Bore, 6.00 Stroke, 25HP,
Clamp Positioner, Swage-Cylinders, sn:FJ68473
4-POST PRESS DAKE Model 927187 100 Ton Platen Press with 3’ x 6’ Work Area, sn:149167
H-FRAME PRESS Approx. 50 Ton H-Frame Press with 5HP
INDUCTION HEATER PILLAR Model AB4660-22 Induction Heater with 50KW, 460 Volt, 10 KHZ Maximum Output,
sn:33162PU
SAWS EVERETT #20 Chop Saw, sn:2100
DORINGER Model D350 Cold Saw, sn:24958
MARVEL Horizontal Band Saw Model 15/7 with In feed and Out feed, sn:E-151994W
DOALL Approx. 10” x 12” Capacity Horizontal Bandsaw with 1-1/2” Blade
ROLLING H-FRAME PRESS/STRAIGHTNER Rolling H-Frame Press Straightening Table with Hydraulic Pump and Enerpac Cylinders Unit,
Approx. 35’ x 9’ Steel Table
AIR COMPRESSOR KAESER Model AS47 Air Compressor with 40HP, 100-190 PSIG, 135-175 CFM (parts only
missing motor)
KAESER Model TC44 Air Dryer
GARDNER DENVER Air Compressor with 200 PSI, sn:M3839
ACORN PLATES/WELDING TABLES (3) ACORN 5’ x 10’ Welding Tables
HOPPERS (3) Self Dumping Hoppers
SAND BLASTER CLEMCO Model 2024 Sand Blaster Series 2000 with 6.OCP, sn:31044, mfg.2000
SUB ARC/SEAM WELDER LINCOLN Cyclomatic Sub Arc/Table Seam Welder with Cyclomatic Seam Tracker System,
In/Out and Front/Back Welders, NA-5 Lincoln Welders, Approximately 55’ Long Capacity with
Two Lincoln Ideal Arc DC-1000 Welding Power Source, sn:U1080704888
FORKLIFTS TOYOTA Forklift Model 6FGU35 with LP Gas, Side Shift, sn:60664
TOYOTA Forklift Model 7FGU35 with LP Gas, Side Shift, sn:63434
SCRAP All Metals, Plate, Round Tube, Shelving, Racks, Solid Metal Tube, Hollow Tube, Flat Steel, Steel
Racking
WELDING/PLASMA THERMAL DYNAMICS Plasma Welder Pakmaster 100 XLP, mfg.2005
(21) LINCOLN WELDERS - Precision Tig 375 Model K1833-l, sn:U1040717007 ● Power Mig
255c Model K2416-2, sn:U1061003909 ● Power Mig 255c Model K2416-2, sn:U1070415702 ●
Ideal Arc CV300 with wire, sn:A6P42596 ● Ideal Arc DC250 with wire, sn:A796074 ● Ideal Arc
CV300 with wire, sn:U1010503641 ● Precision Tig 275 with Dynaflex, sn:U1011201806 ● Ideal
ArcTig 300/300 with Dynaflex, sn:AC827480 ● Ideal Arc Tig 300/300, sn:804265 ● Power Mig
255C, sn:U1061003905 ● Precision Tig 275 with Dynaflex, sn:U1041112564 ● Precision Tig
275 with Dynaflex, sn:U102033514 ● Precision Tig 275 with Dynaflex, sn:1041201805 ●
Precision Tig 275 with Dynaflex, sn:U1010701023 ● Precision Tig 275 with Dynaflex,
sn:101120081 ● Precision Tig 275 with Dynaflex, sn:10111025336 ● Square Tig 275,
sn:U1010701792 ● CV300, sn:U1991011176 ● Ideal Arc 400, sn:AC655023 ● Ideal Arc 300,
sn:AC620637 ● Ideal Arc 250, sn:AC10100200047
Miscellaneous Welding Parts & Accessories
MISCELLANEOUS Rack and Contents of Jigs and Fixtures, Horses, Welding Flux, 3 Spreading Bars, Preston
Easton Tank Turing Rolls, Office Equipment, HP Plotter, Raw Material, Stand Alone Office and
Contents, Fans, Ladders, Chains, Slings, Hand Tools, Power Tools, Large Qty. Steel Tables and
Miscellaneous Scrap Outside, Welders, Forklift Booms, Contents of Cage (inside and outside),
Come-A-Longs, Enerpac, Tool Boxes, Rod Ovens, Track Burner, Jet Drill Press, Rack of
Contents and Dies, Shop Press, Metal Works Roller, Straps, Metal Tables and Carts, Sump
Pump, Bugo Systems, Jack & Pipe Stands, Pipe Beveler, Torch Rings, Lab Equipment, Pallets,
Pallet Jacks
TUBE POINTER GEORGE MITCHELL Hydraulic Tube Push
Pointer with Maximum Tube Size 4-1/2”
OD, 16” Maximum Travel of Dies, (2) Dies,
10” Maximum Point Length, sn:PP-228
SWAGE MACHINE PARKER HANNIFIN Model C2LS33 Press
Swaging Machine with 8.00 Bore, 6.00
Stroke, 25HP, Clamp Positioner, Swage-
Cylinders, sn:FJ68473
4-POST PRESS DAKE Model 927187 100 Ton Platen
Press with 3’ x 6’ Work Area, sn:149167
H-FRAME PRESS Approx. 50 Ton H-Frame Press with 5HP
INDUCTION HEATER PILLAR Model AB4660-22 Induction
Heater with 50KW, 460 Volt, 10 KHZ
Maximum Output, sn:33162PU
ROLLING H-FRAME
PRESS/STRAIGHTNER Rolling H-Frame Press Straightening Table
with Hydraulic Pump and Enerpac
Cylinders Unit, Approx. 9’ x 35’ Steel Table
SAWS EVERETT #20 Chop Saw, sn:2100
DORINGER Model D350 Cold Saw,
sn:24958
MARVEL Horizontal Band Saw Model 15/7
with Infeed and Outfeed, sn:E-151994W
DO-ALL Approx. 10” x 12” Capacity
Horizontal Bandsaw with 1-1/2” Blade
AIR COMPRESSOR KAESER Model AS47 Air Compressor with
40HP, 100-190 PSIG, 135-175 CFM (parts
only missing motor)
KAESER Model TC44 Air Dryer
GARDNER DENVER Air Compressor with
200 PSI, sn:M3839
<
PILLAR
MODEL
AB4660-22
INDUCTION
HEATER
DORINGER COLD SAW DO-ALL APPROXIMATELY 10” X 12”
HORIZONTAL BANDSAW
>
MARVEL
HORIZONTAL
BAND SAW
INTELLECTUAL ASSETS TO BE
AUCTIONED INCLUDING
● BLUEPRINTS
● CUSTOMER LISTS
FOR MORE INFORMATION ON ITEMS AT THIS
AUCTION SALE PLEASE VISIT
WWW.ASSET-SALES.COM
Want to Sell Your Shop or
Know Someone Who Does?
Call Us Toll Free at
(888) 800-4442! We Pay Great
Finder’s Fees!
1 of 2
4
AUCTION SALE DATE & TIME – WEDNESDAY, FEBRUARY 27th @ 10:00 A.M. EST VERY
CLEAN
Want to Sell Your Shop or Know
Someone Who Does? Call Us Toll Free
at (888) 800-4442! We Pay Great
Finder’s Fees!
LINCOLN CYCLOMATIC SUB ARC/TABLE SEAM WELDER
(2) TOYOTA FORKLIFTS
EXCELLENT
1 of 2
2000 1997 1997
Can’t Attend the Sale?
Still Want to Bid? Visit
Our Website at
www.asset-sales.com
and Check Out Our
Upcoming Auction
Calendar! You Can Also
Sign Up to Receive Email
Notifications by Joining
Our Mailing List!
CLEMCO MODEL 2024 SAND BLASTER
WWW.ASSET-SALES.COM
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
VERY
CLEAN
LIKE
NEW
VERY
CLEAN
DBL
CHUCKS
OVER 1000 LOTS
(888) 800-4442
1 of 2
1 of 2
2006
2006
ATTENDING THE AUCTION
IN PERSON? What you need to Bring…
•Your Drivers License
•Business Card, For Fast and Easy
Registration
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be
Paying via Company Check or You Can
Choose to Pay Via Wire Transfer.
ACORN PLATES/WELDING
TABLES (3) ACORN 5’ x 10’ Welding Tables
HOPPERS (3) Self Dumping Hoppers
SAND BLASTER CLEMCO Model 2024 Sand Blaster Series 2000 with
6.OCP, sn:31044, mfg.2000
SUB ARC/SEAM WELDER LINCOLN Cyclomatic Sub Arc/Table Seam Welder
with Cyclomatic Seam Tracker System, In/Out and
Front/Back Welders, NA-5 LINCOLN Welders,
Approximately 55’ Long Capacity with (2) LINCOLN
Ideal Arc DC-1000 Welding Power Sources,
sn:U1080704888
FORKLIFTS TOYOTA Approx. 8000lb Forklift Model 6FGU35 with
LP Gas, Side Shift, sn:60664
TOYOTA Approx. 8000lb Forklift Model 7FGU35 with
LP Gas, Side Shift, sn:63434
SCRAP All Metals, Plate, Round Tube, Shelving, Racks, Solid
Metal Tube, Hollow Tube, Flat Steel, Steel Racking
MISCELLANEOUS Rack and Contents of Jigs and Fixtures, Horses,
Welding Flux, 3 Spreading Bars, Preston Easton Tank
Turning Rolls, Office Equipment, HP Plotter, Raw
Material, Stand Alone Office and Contents, Fans,
Ladders, Chains, Slings, Hand Tools, Power Tools,
Large Qty. Steel Tables and Miscellaneous Scrap
Outside, Welders, Forklift Booms, Contents of Cage
(inside and outside), Come-A-Longs, Enerpac, Tool
Boxes, Rod Ovens, Track Burner, Jet Drill Press, Rack
of Contents and Dies, Shop Press, Metal Works Roller,
Straps, Metal Tables and Carts, Sump Pump, Bugo
Systems, Jack & Pipe Stands, Pipe Beveler, Torch
Rings, Lab Equipment, Pallets, Pallet Jacks
>
(3) ACORN
5’ X 10’
WELDING
TABLES
<
(3) DUMP
HOPPERS
2 AVAILABLE
2 AVAILABLE
3 AVAILABLE
3 AVAILABLE
55’
TRAVEL
MACHINERY INSPECTION DATE & TIMES – TUESDAY, FEBRUARY 26th FROM 8:00 A.M. – 4:00 P.M. EST
Can’t Attend the Sale? Register on Bidspotter.com to Bid Live Online in this Auction!! (888) 800-4442
5
MISCELLANEOUS WELDERS
2 of 5
Visit Our Website to View
a Calendar of Additional
Upcoming Industrial
Machine Auctions!
www.asset-ales.com
Visit Our
Website to
See
Upcoming
Auctions &
Join Our
Mailing List
www.asset-
sales.com
Visit Our Website to View a Calendar of Upcoming Auctions! While
You’re There, Join Our Mailing List and Receive Email Notifications of
Future Sales! WWW.ASSET-SALES.COM
>
(2)
FELLOWS
MODEL 6A
GEAR
SHAPERS
MONARCH DS&G 17” SWING X 80” CENTERS ENGINE LATHE
LEBLOND REGAL SERVO SHIFT 15” SWING X 54” CENTERS ENGINE LATHE
<
BRIDGEPORT
VERTICAL
MILLING
MACHINE
MONARCH 20” SWING X 102” CENTERS HEAVY DUTY LATHE
CLAUSING COLCHESTER 17” SWING X 83” CENTERS ENGINE LATHE
<
BARBER
COLMAN
NO.4-4 HOB
SHARPENER
1 of 2 1 of 5 1 of 2
ATTENDING THE AUCTION IN PERSON?
What you need to Bring…
•Your Drivers License
•Business Card
•Tax Exempt Form if You’re Non Taxable
•Bank Letter of Guarantee if You Will be Paying via
Company Check.
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442! We Pay Great Finder’s Fees!
Visit Our Website to
View a Calendar of
Additional Upcoming
Industrial Machine
Auctions!
www.asset-sales.com
WWW.ASSET-SALES.COM
EXCELLENT 2 AVAILABLE
EXCELLENT
EXCELLENT
WELDING/PLASMA THERMAL DYNAMICS Plasma Welder Pakmaster 100 XLP, mfg.2005
(21) LINCOLN WELDERS - Precision Tig 375 Model K1833-l, sn:U1040717007
● Power Mig 255c Model K2416-2, sn:U1061003909 ● Power Mig 255c Model
K2416-2, sn:U1070415702 ● Ideal Arc CV300 with wire, sn:A6P42596 ● Ideal
Arc DC250 with wire, sn:A796074 ● Ideal Arc CV300 with wire,
sn:U1010503641 ● Precision Tig 275 with Dynaflex, sn:U1011201806 ● Ideal
Arc Tig 300/300 with Dynaflex, sn:AC827480 ● Ideal Arc Tig 300/300,
sn:804265 ● Power Mig 255C, sn:U1061003905 ● Precision Tig 275 with
Dynaflex, sn:U1041112564 ● Precision Tig 275 with Dynaflex, sn:U102033514
● Precision Tig 275 with Dynaflex, sn:1041201805 ● Precision Tig 275 with
Dynaflex, sn:U1010701023 ● Precision Tig 275 with Dynaflex, sn:101120081 ●
Precision Tig 275 with Dynaflex, sn:10111025336 ● Square Tig 275,
sn:U1010701792 ● CV300, sn:U1991011176 ● Ideal Arc 400, sn:AC655023 ●
Ideal Arc 300, sn:AC620637 ● Ideal Arc 250, sn:AC10100200047
Miscellaneous Welding Parts & Accessories
ABBREVIATED TERMS & CONDITIONS OF AUCTION YOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING
CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR
IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE. Subject to
amendments and modifications announced by the auctioneer at the time of the
auction, any person participating in the auction shall be bound by the following terms
and conditions. The auctioneer does not warrant the accuracy, authenticity,
description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in
accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES
AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in
full and all articles purchased shall be removed in the time allocated by the auctioneer.
No item, no matter how small or how far the purchaser has to travel, may be removed
until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company
check accompanied by a bank letter of guarantee payable to Asset Sales, Inc. All
bidding and invoicing will be in US Dollars ($). All bidders are responsible for all
applicable taxes.
Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must
be completed by the posted date. Rigging/Removal may not begin until payment has
been made in full and the auction sale is complete. All heavy rigging will require a
certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL
FAULTS” BASIS.
A 13% Buyer’s Premium will apply to all onsite purchases and a 16% Buyer’s Premium for online
purchases.
REGISTRATION & BIDDING ONLINE:
If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc.
The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify
telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO
WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-
ONSITE BIDDING.
21 AVAILABLE
HOTEL
Street Address
City, State Zip Code
Telephone Number
“LYNYRD SKYNYRD”
MILWAUKEE IRON STREET SURVIVOR
DIRECTIONS – FROM TRI-CITIES MUNICIPAL AIRPORT
Exit Airport toward I-182 E. Turn right to merge onto I-182 E/US 12 E toward Walla Walla. Continue onto US 12E for approximately 4 miles. Turn right onto Sacajawea Park Road. Take the 2nd right onto E. Ainsworth Street. Plant will be on the right. Follow the auction signs.
HOTELS
Corporate Headquarters 301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079 Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.com Asset Sales, Inc. – South Carolina License # Lance Mannion 3113R * Asset Sales 003427
Asset Sales, Inc.
PUBLIC AUCTION By Order of the Bankruptcy Court
JACK HECKMAN TUBE COMPANY
TUBE BENDING, FABRICATION & WELDING
Greer, SC
WEDNESDAY, FEBRUARY 27th @ 10:00 A.M. EST
GREENVILLE MARRIOTT
1 Parkway East
Greenville, SC 29615
(864) 297-0300
UPCOMING AUCTIONS TUESDAY, MARCH 27TH – Allstate Diversified Products
CNC Fabricating & Stamping Facility – Syracuse, NY
TUESDAY, MAY 15TH – Tri-America Contractors
Structural Steel Fabrication – Ironton, OH
3 AVAILABL
E
(2) TOYOTA FORKLIFTS
?
UPCOMING AUCTIONS FRIDAY, JUNE 15th – R&D Enterprise Contractors, Inc.
Excavation & Construction Company, Yellow Iron –
Chambersburg, PA
WEDNESDAY, JUNE 27th – Tri-America Steel Division
Fabricating Shop – Ironton, OH
TBA – Tyler Pipe
Iron Foundry – Tyler, TX
AUGUST TBA – Fabricating & Machinery Facility
Amada’s, Laser & Fabricating – Vermont
UPCOMING AUCTIONS TUESDAY, MARCH 5th – N&N Machine Inc.
Complete Heavy Turning & Machine Shop
Onsite & Online thru Bidspotter
Paducah, KY
WEDNESDAY, MARCH 6th – Precision DNC Canada Inc.
CNC & Manual Machinery Shop
ONLINE ONLY thru Bidspotter
Lachine, QC, Canada
THURSDAY, MARCH 7th – D-TEK Manufacturing
CNC Horizontal Boring & Machining & Inspection Facility
Onsite & Online thru Bidspotter
Duncan, SC
UPCOMING
AUCTIONS THURSDAY, NOVEMBER 8TH
PLAZA MACHINE TOOL COMPANY INC.
CNC & Manual Machine Shop
Milan, TN
2008
DIRECTIONS –FROM GREENVILLE-SPARTANBURG INTERNATIONAL AIRPORT: Exit Airport onto Stevens Road. Turn left onto S12/Brockman McClimon Road. Turn right onto S. Carolina 101. Take the 1st left onto Brookshire Rd. Take the 2nd right onto State Rd S-42-1836 Yellow Lane. Turn right onto Victor Hill Road. Plant will be on the left. Plant is approximately 3.5 miles from the airport. Follow auction signs.
HOTELS
HOLIDAY INN Express Hotel & Suites
2681 Dry Pocket Road
Greer, SC 29650
(864) 213-9331
Want to join our mailing list? Want to be included in
Email Blasts announcing future auctions? Want to
update your address? Curious to preview machines and
tooling featured in an upcoming auction? Want to
request a brochure? Or want to be removed from our
mailing list?
Just write the info on the back cover of this
brochure and email or fax it to us at:
[email protected] or (704) 821-4325
Visit our website at www.asset-sales.com to view all of our
Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
(4) TUBE BENDERS TELEDYNE PINES #2A Tube Bender with 3” OD Capacity, Auto Mandrel Extractor, Retract-
Clamp / Unclamp, NC Bender Control
TELEDYNE PINES #2 Tube Bender with 3” OD Capacity, Mandrel Extractor, NC Bender
Control, sn:11235-88146
TELEDYNE PINES #4A Tube Bender with 4” OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, Counter Clockwise Bending Rotation, 30” Maximum Radius of Bend, NC Bender
Control, sn:11435-65247
TELEDYNE PINES #4 Tube Bender with 4’ OD Capacity Schedule 80 to 6” .250 Non Ferrous
Round Tubing, NC Bender Control, sn:11435-59006
Various Bending Dies and Parts for Tube Benders
END FINISHING MACHINE TELEDYNE PINES Model 662 Beveler / Pneumatic End Finishing Machine with 3” O.D.
Capacity, sn:66250-73382
TUBE POINTER GEORGE MITCHELL Hydraulic Tube Push Pointer with Maximum Tube size 4-1/2” OD,
Maximum Travel of Dies 16”, Number of Dies (2), 10” Maximum Point Length, sn:PP-228
TUBE POLISHING FINISHING SYSTEM RAND-BRIGHT Model HD-300 Tube Polishing Cylindrical Finishing System with Maximum Part
Size 4-1/2” OD, 16” x 4” Maximum Polishing Wheel Diameter, Single Head, Turns, Rolls &
Polishes Tubing, Torit Dust Collector System, sn:300-218HD300
SWAGE MACHINE PARKER HANNIFIN Model C2LS33 Press Swaging Machine with 8.00 Bore, 6.00 Stroke, 25HP,
Clamp Positioner, Swage-Cylinders, sn:FJ68473
4-POST PRESS DAKE Model 927187 100 Ton Platen Press with 3’ x 6’ Work Area, sn:149167
H-FRAME PRESS Approx. 50 Ton H-Frame Press with 5HP
INDUCTION HEATER PILLAR Model AB4660-22 Induction Heater with 50KW, 460 Volt, 10 KHZ Maximum Output,
sn:33162PU
SAWS EVERETT #20 Chop Saw, sn:2100
DORINGER Model D350 Cold Saw, sn:24958
MARVEL Horizontal Band Saw Model 15/7 with In feed and Out feed, sn:E-151994W
DOALL Approx. 10” x 12” Capacity Horizontal Bandsaw with 1-1/2” Blade
ROLLING H-FRAME PRESS/STRAIGHTNER Rolling H-Frame Press Straightening Table with Hydraulic Pump and Enerpac Cylinders Unit,
Approx. 35’ x 9’ Steel Table
AIR COMPRESSOR KAESER Model AS47 Air Compressor with 40HP, 100-190 PSIG, 135-175 CFM (parts only
missing motor)
KAESER Model TC44 Air Dryer
GARDNER DENVER Air Compressor with 200 PSI, sn:M3839
ACORN PLATES/WELDING TABLES (3) ACORN 5’ x 10’ Welding Tables
HOPPERS (3) Self Dumping Hoppers
SAND BLASTER CLEMCO Model 2024 Sand Blaster Series 2000 with 6.OCP, sn:31044, mfg.2000
SUB ARC/SEAM WELDER LINCOLN Cyclomatic Sub Arc/Table Seam Welder with Cyclomatic Seam Tracker System,
In/Out and Front/Back Welders, NA-5 Lincoln Welders, Approximately 55’ Long Capacity with
Two Lincoln Ideal Arc DC-1000 Welding Power Source, sn:U1080704888
FORKLIFTS TOYOTA Forklift Model 6FGU35 with LP Gas, Side Shift, sn:60664
TOYOTA Forklift Model 7FGU35 with LP Gas, Side Shift, sn:63434
SCRAP All Metals, Plate, Round Tube, Shelving, Racks, Solid Metal Tube, Hollow Tube, Flat Steel, Steel
Racking
WELDING/PLASMA THERMAL DYNAMICS Plasma Welder Pakmaster 100 XLP, mfg.2005
(21) LINCOLN WELDERS - Precision Tig 375 Model K1833-l, sn:U1040717007 ● Power Mig
255c Model K2416-2, sn:U1061003909 ● Power Mig 255c Model K2416-2, sn:U1070415702 ●
Ideal Arc CV300 with wire, sn:A6P42596 ● Ideal Arc DC250 with wire, sn:A796074 ● Ideal Arc
CV300 with wire, sn:U1010503641 ● Precision Tig 275 with Dynaflex, sn:U1011201806 ● Ideal
ArcTig 300/300 with Dynaflex, sn:AC827480 ● Ideal Arc Tig 300/300, sn:804265 ● Power Mig
255C, sn:U1061003905 ● Precision Tig 275 with Dynaflex, sn:U1041112564 ● Precision Tig
275 with Dynaflex, sn:U102033514 ● Precision Tig 275 with Dynaflex, sn:1041201805 ●
Precision Tig 275 with Dynaflex, sn:U1010701023 ● Precision Tig 275 with Dynaflex,
sn:101120081 ● Precision Tig 275 with Dynaflex, sn:10111025336 ● Square Tig 275,
sn:U1010701792 ● CV300, sn:U1991011176 ● Ideal Arc 400, sn:AC655023 ● Ideal Arc 300,
sn:AC620637 ● Ideal Arc 250, sn:AC10100200047
Miscellaneous Welding Parts & Accessories
MISCELLANEOUS Rack and Contents of Jigs and Fixtures, Horses, Welding Flux, 3 Spreading Bars, Preston
Easton Tank Turing Rolls, Office Equipment, HP Plotter, Raw Material, Stand Alone Office and
Contents, Fans, Ladders, Chains, Slings, Hand Tools, Power Tools, Large Qty. Steel Tables and
Miscellaneous Scrap Outside, Welders, Forklift Booms, Contents of Cage (inside and outside),
Come-A-Longs, Enerpac, Tool Boxes, Rod Ovens, Track Burner, Jet Drill Press, Rack of
Contents and Dies, Shop Press, Metal Works Roller, Straps, Metal Tables and Carts, Sump
Pump, Bugo Systems, Jack & Pipe Stands, Pipe Beveler, Torch Rings, Lab Equipment, Pallets,
Pallet Jacks
2 AVAILABLE
Top Related