22

ACCESSORIESINTERFACE C

Up to 36 kVApplicationFor use with connectors andbushings with an interface Cas described by CENELEC EN50180 and 50181.

Technical characteristicsAll these products, except theearthing plugs, are tested forAC withstand and partialdischarge prior to leavingthe factory.

6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV

12/20 (24) kV12.7/22 (24) kV

18/30 (36) kV

400SOP-BStand-off plugIs designed to support and'dead-end' connectors with atype C interface when removedfrom equipment.

Ordering instructionsOrder400SOP-B for 12 kV,K400SOP-B for 24 kV orM400SOP-B for 36 kVapplications.

400GP-BEarthing plugIs designed to support andearth connectors with a type Cinterface when removed fromequipment.

Ordering instructionsOrder400GP-B for 12, 24 or 36 kVapplications.

300GP-BEarthing plugIs designed to earth the 430TB-630A connectors when it isfixed-mounted to the equipment(maintenance earthing).

Ordering instructionsOrder300GP-B for 12 or 24 kVapplications.

400DR-BDead-end receptacleFits over a bushing with a typeC interface to provide 'dead-end' facility.

Ordering instructionsOrder400DR-B for 12 kV,K400DR-B for 24 kV orM400DR-B for 36 kVapplications.The dead-end receptacle canbe supplied with an earth lead.Order: -/G.E.g. K400DR-B/G.

23

Kit MTEarthing kit for coppertape screened cablesContains a tinned copper braid(25 mm² - L = 500 mm), atinned copper wire for cleatingand some water sealing mastic.

Ordering instructionsOrderKit MT for 12 kV, 24 kV36 kV or 41.5 kV applications.

440CPConnecting plugFor connecting two or more440TB connectors, thus creatinga separable cable joint or amultiple cable connection toequipment.For use up to 1250 A.Only for use with 440TB.

400RTPAReducing tap plugProvides a type A interfaceto connectors with a type Cinterface.A 'C' spanner, 600SW, is usedto tighten the reducing tap plugon to its mating part.

Ordering instructionsOrder400RTPA for 12 kV orK400RTPA for 24 applications.Order 600SW for the 'C'spanner.

400CP-SCConnecting plugFor connecting two or moreconnectors with a type Cinterface together, thus creatinga separable cable joint or amultiple cable connection toequipment.

Ordering instructionsOrder400CP-SC for 12 kV,K400CP-SC for 24 kV orM400CP-SC for 36 kVapplications.

400BIPABasic insulating plugActs as a tightening nut forthe 400TB and 440TB teeconnector kits.The plug contains a voltagedetection point.The conductive rubberprotection cap is included.

Ordering instructionsOrder400BIPA for 12 kV,K400BIPA for 24 kV orM400BIPA for 36 kVapplications.

Ordering instructionsOrder440CP for 12 kV,K440CP for 24 kV orM440CP for 36 kVapplications.Order: -/ATEX for use inpotentially explosiveatmospheres (for 12 kV max.).