Revision Date20150115
Document numbeR
notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be in-stalled by a certified technician. Please review the Installation Guide carefully before beginning any work.
beFoRe instaLLation1- Connect module to computer2- Login to Weblink account3- Flash firmware to module (module is not preloaded with firmware)4- Use accessories accordingly (accessories are sold separately)
U.S. Patent No. 8,856,780
instaLL guiDeCOM-AL(RS)-TL1-[ADS-ALCA]-EN
haRDwaReADS-ALCA
accessoRiesADS-USB (REQUIRED)
COMPATIBLE RF-KIT (OPTIONAL)DRONE 2/3 (OPTIONAL)
FiRmwaReCOM-AL(RS)-TL1-[ADS-ALCA]
www.idatalink.comAutomotive Data Solutions Inc. © 2015
19945
U.S. Patent No. 8,856,780
VEHICLE LIST - 1 OF 1M
AK
E
MO
DEL
YEA
R
INST
ALL
TYP
E
FEATURES
DAT
A IM
MO
BIL
IZER
BYP
ASS
3X L
OC
K S
TAR
T/ST
AN
DA
LON
E M
OD
.
PU
SH T
O S
TAR
T CT
RL
AR
M O
EM A
LAR
M
DIS
AR
M O
EM A
LAR
M
DO
OR
LO
CK
DO
OR
UN
LOC
K
TRU
NK
/HAT
CH
REL
EASE
TAIL
GAT
E W
IND
OW
REL
EASE
TAC
HO
MET
ER O
UTP
UT
BR
AK
E P
EDA
L ST
ATU
S O
UTP
UT
E-B
RA
KE
OU
TPU
T
DO
OR
STA
TUS
OU
TPU
T
TRU
NK
STA
TUS
OU
TPU
T
HO
OD
STA
TUS
OU
TPU
T*
LEXU
S
ES350 PTS AT 07-11 3 • • • • • • • • • • • • • •
TOYO
TA
Camry PTS AT 07-11 3 • • • • • • • • • • • • • •
Camry Hybrid PTS AT 07-11 3 • • • • • • • • • • • • • •
Corolla PTS AT 09-13 2 • • • • • • • • • • • • • •
Highlander PTS AT 08-13 3 • • • • • • • • • • • • • •
Highlander Hybrid PTS AT 08-13 3 • • • • • • • • • • • • • •
Rav4 PTS AT 09-12 2 • • • • • • • • • • • • •* Available only if vehicle is equipped with factory hood switch.
NOTE
I Keyless and smartkey systems will remain functional during remote start.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 2 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 3 oF 18• 20150115
BOX CONTENTS - 1 OF 1
21
3
21
3
34
21
76
9
54321
10
845
2
67
1
3
45
2
6
1
3
D
C
B
A
F
E
PROGRAMMINGBUTTON
LED 1
BLACKDATA PORT(WEBLINK, RF, TELEMATIC)
BLUE
WHITE
WHITE
WHITE
BLACK
6 PIN WHITE CONNECTOR
7 PIN WHITE CONNECTOR
MODULE 4 PIN BLACK CONNECTOR
10 PIN BLACK CONNECTOR
DATA CABLE 1
DATA CABLE 2
3 PIN WHITE CONNECTOR
3 PIN BLUE CONNECTOR
BOX CONTENTS
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULEDATA PORT
DOC.: #19945
U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 4 oF 18• 20150115
COMPATIBLE ACCESSORIES - 1 OF 1
5 AMPS
12V (+) REDBLACK
RF KIT
ANTENNA
FLASH RF DECODERBEFORE INSTALLATION
RF DECODERBLUE CABLE BLACK CABLE
BLACK
BLUEMODULE
DATA PORT
RF KIT (accessories sold separately)
5 AMPS
MODULEDATA PORT
DRONE
(NC)
TELEMATIC KIT (accessory sold separately)
01 RED
04 YELLOW OR BLUE
REMOVE THE WHITE WIRE FROM PIN 03 AND INSERT IT IN PIN 04 ANDREMOVE THE YELLOW OR BLUE WIRE FROM PIN 04 AND INSERT IT IN PIN 03.
02 BLACK03 WHITE
12V (+)
DOC.: #19945
U.S. Patent No. 8,856,780
A
COMPONENT LOCATOR - 1 OF 1
inteRioR view
DRiveR siDe view PassengeR siDe view
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 5 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
TYPE 2 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
TOYO
TA
Corolla TMMCPTSAT
09-13
Ignition 2F ~ 8 pin 4 Yellow (+) ECU ~
STSW E52 ~ 19 pin 4 Black (+) ECU ~
PTS ~ ~ 14 pin 7 White (-) Push button ~
Parking Light E8 White 20 pin 18 Brown (-) Parking light switch ~
CanH OBDII ~ 16 pin 6 LtGreen (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
Corolla NUMMIPTSAT
09-13
Ignition 2F ~ 8 pin 4 Red (+) ECU ~
STSW E52 ~ 19 pin 4 White (+) ECU ~
PTS ~ ~ 14 pin 7 White (-) Push button ~
Parking Light E8 White 20 pin 18 Brown (-) Parking light switch ~
CanH OBDII ~ 16 pin 6 LtGreen (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
Rav4 PTSAT
09-12
Ignition 2F ~ 8 pin 4 Yellow (+) ECU ~
STSW E17 ~ 19 pin 4 Red (+) ECU ~
PTS ~ ~ 14 pin 7 White (-) Push button ~
Parking Light E12 White 20 pin 18 Brown (-) Parking light switch ~
CanH OBDII ~ 16 pin 6 Black (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 6 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
PTS
OBDII
A
B
C
AA
BB
1 2 3 4 5 6 78 9 10 11 12 13 14
15 16 17 18 19
8 7 6 5 43 2 1
1112131415161718192012345678910
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
1 2 3 4 5 6 78 9 10 11 12 13 14
AA
BB
A
B
C
D
F
21
34
21
3
21
3
56789
10
21
34567
21
3456
F
A
B
CD E DATA
E
21
34
21
34
7.5 A
PTS SWITCH
OBDII CONNECTOR
PARKING LIGHT SWITCH
MAIN BODY ECU
TYPE 2 - WIRING DIAGRAM - 1 OF 1
GRAY/YELLOW (NC)01 GRAY/YELLOW (NC)02 GRAY/RED (NC)
GREEN/YELLOW (NC)03 GREEN/YELLOW (NC)04 GREEN/RED (NC)
- PTS (-) OUTPUT05 BLUE/YELLOW - PTS (-) OUTPUT INPUT06 BLUE/RED - GROUND (-) INPUT
PINK - IGNITION (+) INPUT01 PINK - IGNITION (+) INPUT PINK/BLACK (NC)02 PINK/BLACK (NC)
03 ORANGE (NC)
- GROUND (-) INPUT05 ORANGE/BLACK - GROUND (-) INPUT BROWN/YELLOW - CANL06 BROWN/YELLOW - CANL
WHITE/BLACK - STSW (+) OUTPUT03 WHITE/BLACK - STSW (+) OUTPUT
- IGNITION (+) INPUT01 WHITE - IGNITION (+) INPUT
BROWN/RED - CANH07 BROWN/RED - CANH
04 ORANGE/WHITE (NC)
PTS (-) - 07
01 GREEN/BLACK - HOOD STATUS (-) INPUT
03 RED/WHITE (NC)02 BLUE/BLACK (NC)
04 BROWN (NC)
06 PURPLE/BLACK (NC)05 PURPLE/YELLOW (NC)
WHITE 07 WHITE (NC)08 BLACK/WHITE (NC)
10 PURPLE/WHITE (NC)
02 YELLOW/RED (NC)03 YELLOW/BLACK (NC)
01 YELLOW (NC)
CANL - 14
HOOD STATUS (-)
IGNITION (+) - 04
STSW (+) - 04
CANH - 06
PARKING LIGHT (-) - 18
02 WHITE/RED (NC)
GREEN09 GREEN - PARKING LIGHT (-) OUTPUT
C - WHITE
FRONT SIDE BACK SIDE
IMPORTANT:1- NO TAKEOVER AVAILABLE.UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.
WITHOUTOEM HOOD
STATUSONLY
WITHOUTOEM HOOD
STATUSONLY
CONNECTIONS ARE REQUIREDONLY IF IDLE MODE
IS DESIRED
MODULE
DATA CABLE
OR
02 WHITE (NC)03 BLACK - GROUND04 RED - 12V (+)
01 BLUE/WHITE (NC)WITHOUT ACOMPATIBLEACCESSORY
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
COMPATIBLEACCESSORY
12V (+)
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 7 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
TYPE 3 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
LEXU
S ES350PTSAT
07-12
Ignition 1I ~ 10 pin 07 Black (+) ECU ~
STSW E61 ~ 10 pin 04 Red (+) ECU ~
PTS ~ ~ 14 pin 07 Blue (-) Push button ~
Parking Light E27 White 20 pin 18 Black (-) Parking light switch ~
CanH OBDII ~ 16 pin 06 LtGreen (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 Pink (DATA) OBDII ~
TOYO
TA
Camry PTSAT
07-11
Ignition 1I ~ 10 pin 07 Brown (+) ECU ~
STSW E9 ~ 10 pin 04 Gray (+) ECU ~
PTS ~ ~ 14 pin 07 Blue (-) Push button ~
Parking Light E21 White 20 pin 18 Black (-) Parking light switch ~
CanH OBDII ~ 16 pin 06 Black (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
Camry HybridPTSAT 07-11
Ignition 1I ~ 10 pin 07 Brown (+) ECU ~
STSW E9 ~ 10 pin 04 Gray (+) ECU ~
PTS ~ ~ 14 pin 07 Blue (-) Push button ~
Parking Light E21 White 20 pin 18 Black (-) Parking light switch ~
CanH ~ ~ 16 pin 06 Black (DATA) OBDII ~
CanL ~ ~ 16 pin 14 White (DATA) OBDII ~
Highlander PTSAT
08-13
Ignition 1I ~ 10 pin 07 White (+) ECU ~
STSW D10 ~ 10 pin 04 Pink (+) ECU ~
PTS ~ ~ 14 pin 07 Pink (-) Push button ~
Parking Light D13 White 20 pin 18 LtBlue (-) Parking light switch ~
CanH OBDII ~ 16 pin 06 Blue (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
Highlander HybridPTSAT
08-13
Ignition 1I ~ 10 pin 07 White (+) ECU ~
STSW D10 ~ 10 pin 04 Yellow (+) ECU ~
PTS ~ ~ 14 pin 07 Pink (-) Push button ~
Parking Light D13 White 20 pin 18 LtBlue (-) Parking light switch ~
CanH OBDII ~ 16 pin 06 Black (DATA) OBDII ~
CanL OBDII ~ 16 pin 14 White (DATA) OBDII ~
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 8 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
PTS
OBDII
A
B
AA
BB
1112131415161718192012345678910
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
1 2 3 4 5 6 78 9 10 11 12 13 14
1 23 4 5 67 8 9 10
1 2 3 4 56 7 8 9 10
C
BB
AA
A
B
C
D
F
21
34
21
3
21
3
56789
10
21
34567
21
3456
F
A
B
CD E DATA
E
21
34
21
34
7.5 A
PTS SWITCH
OBDII CONNECTOR
PARKING LIGHT SWITCH
MAIN BODY ECU
TYPE 3 - WIRING DIAGRAM - 1 OF 1
GRAY/YELLOW (NC)01 GRAY/YELLOW (NC)02 GRAY/RED (NC)
GREEN/YELLOW (NC)03 GREEN/YELLOW (NC)04 GREEN/RED (NC)
- PTS (-) OUTPUT05 BLUE/YELLOW - PTS (-) OUTPUT INPUT06 BLUE/RED - GROUND (-) INPUT
PINK - IGNITION (+) INPUT01 PINK - IGNITION (+) INPUT PINK/BLACK (NC)02 PINK/BLACK (NC)
03 ORANGE (NC)
05 ORANGE/BLACK (NC) BROWN/YELLOW - CANL06 BROWN/YELLOW - CANL
WHITE/BLACK - STSW (+) OUTPUT03 WHITE/BLACK - STSW (+) OUTPUT
- IGNITION (+) INPUT01 WHITE - IGNITION (+) INPUT
BROWN/RED - CANH07 BROWN/RED - CANH
04 ORANGE/WHITE (NC)
PTS (-) - 07
01 GREEN/BLACK (NC)
03 RED/WHITE (NC)02 BLUE/BLACK (NC)
04 BROWN (NC)
06 PURPLE/BLACK (NC)05 PURPLE/YELLOW (NC)
WHITE 07 WHITE (NC)08 BLACK/WHITE (NC)
10 PURPLE/WHITE (NC)
02 YELLOW/RED (NC)03 YELLOW/BLACK (NC)
01 YELLOW (NC)
CANL - 14
IGNITION (+) - 07
STSW (+) - 04
CANH - 06
02 WHITE/RED (NC)
GREEN09 GREEN - PARKING LIGHT (-) OUTPUT
BACK SIDE
IMPORTANT:1- NO TAKEOVER AVAILABLE.UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.
CONNECTIONS ARE REQUIREDONLY IF IDLE MODE
IS DESIRED
PARKING LIGHT (-) - 18
C - WHITE
MODULE
DATA CABLE
OR
02 WHITE (NC)03 BLACK - GROUND04 RED - 12V (+)
01 BLUE/WHITE (NC)WITHOUT ACOMPATIBLEACCESSORY
WITH A COMPATIBLEACCESSORY.IMPORTANT: SEE THECOMPATIBLE ACCESSORIESPAGE FOR DETAILS.
COMPATIBLEACCESSORY
12V (+)
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 9 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
>>
01
ENGINESTARTSTOP
STOP ACC ON STARTON
02
03
ENGINESTARTSTOP
STOP ACC ON STARTSTOP
04
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Between each step, LED will turn solid RED, this is the default standby mode.
Push start button twice [2x] to ON position.
Wait, LED will turn solid GREEN then will turn OFF.
Push start button once [1x] to OFF position.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 10 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
ENGINESTARTSTOP
OFF ACC ON STARTOFF
05
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
Wait, LED 1 will turn solid RED for 2 seconds.
Set ignition to OFF position.
Valet Mode Programming Procedure completed.
To exit valet mode: repeat steps 1 to 5.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 11 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
06
07
>>
08
09
ENGINESTARTSTOP
OFF ACC ON STARTOFF
10
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
LED 1 will turn solid RED.
Time restriction. Complete next step within 2 seconds from previous step.
Press once [1x] on LOCK button of aftermarket remote.
LED 1 will fl ash GREEN once [1x].
LED 1 will turn solid RED.
To program additional remotes: repeat steps 4 to 7 using each additional remote.
Wait, LED 1 will turn OFF.
Set ignition to OFF position.
Aftermarket Remote Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 12 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
>>
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTOFF
02
03[X]
04
05[Y]
06
07[Z]
08[Z]
09
10
11[Y]
12
13
14
>>
MODULE NAVIGATION PROCEDURE - 1 OF 1
It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13.
Module must be programmed to the vehicle.
Use the Module Navigation Chart on the next page.
Set ignition to OFF position.
TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN.
IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will fl ash GREEN an equal amount of times continuously.
TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED.
IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will fl ash RED an equal amount of times continuously.
TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN.
LED 1 will flash GREEN as many times as the current (or default) setting number, continuously.
IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will fl ash GREEN an equal amount of times continuously.
To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure.
To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED.
LED 1 will fl ash RED as many times as the current option number continuously.
Configure every other setting and proceed to step 13.
MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will fl ash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 13 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
moDuLe navigation chaRt - 1 OF 1
moDuLe navigation chaRt:notes
[X] m
enu
s
[Y] o
Ptio
ns
[Z] s
etti
ngs
I Default settings are listed in bold.
01 CONFIGURATION
01 DISARM/UNLOCK BEFORE START01 oFF
II Make sure the option is covered on the vehicle before attempting to change the setting.
02 ON
02 RELOCK AFTER START01 oFF02 ON
03 RELOCK AFTER SHUTDOWN01 oFF02 ON
04 FORCE UNLOCK ALL ON FIRST PRESS01 oFF02 ON
05 N/A 01 N/A06 N/A 01 N/A
07 FACTORY KEYLESS RS SEQUENCE
01 DISABLE02 N/A03 LOCK + UNLOCK + LOCK04 LocK + LocK + LocK
08 MODULE RUN TIME
01 03 MIN02 05 MIN03 10 MIN04 15 MIN05 25 MIN06 30 MIN07 35 MIN08 15 min
09 WAIT TO START DELAY
01 02 sec02 05 SEC03 08 SEC04 10 SEC05 15 SEC06 20 SEC07 25 SEC08 30 SEC
10-12 N/A 01 N/A02-07 Technical Support only 01 N/A 01 N/A
*Vehicle will shutdown when a door is opened.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 14 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
Remote staRteR eRRoR coDes - 1 OF 1
Remote staRteR eRRoR coDes:notes
[X] n
um
beR
oF
PaR
Kin
g Li
ght
FLas
hes
Dia
gno
stic
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 N/A04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 N/A08 Tach failure.09 N/A10 System is in Valet Mode.
Remote staRteR shutDown eRRoR coDes:notes
[Y] n
um
beR
oF
PaR
Kin
g Li
ght
FLas
hes
Dia
gno
stic
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 N/A
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 Check engine warning light is ON.09 Low fuel warning light is ON.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 15 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
moDuLe Diagnostics - 1 OF 1
test moDuLe
LeD
1 s
tatu
s
Dia
gno
stic
I DURING PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
III WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 16 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
Disconnect all connectors from module except the BLACK 4-PIN connector.
Disconnect the BLACK 4-PIN connector.
PRESS AND HOLD programming button while connecting the BLACK 4-PIN connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 17 oF 18• 20150115DOC.: #19945
U.S. Patent No. 8,856,780
instaLLation checKList - 1 OF 1
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
¨
Question 1: Do the doors lock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
¨
Question 2: Do the doors unlock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
¨
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
¨
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
¨
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 6: Does the vehicle remote start?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
¨
Question 7: Does the vehicle shut down?
YES: Go to next step.
¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
¨
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.
18 Press brake pedal.
¨
Question 10: Does the vehicle shut down?
YES: Go to next step.
¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
checKList
www.idatalink.comAutomotive Data Solutions Inc. © 2015 COM-AL(RS)-TL1-[ADS-ALCA]-EN
Page 18 oF 18• 20150115DOC.: #19945
Top Related