ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PROGRAM BOOK
ANVAYA HOTEL, BALI – INDONESIA
31 OCTOBER-2 NOVEMBER 2018
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
CONFERENCE ARRANGEMENT
Date Time Program
30 October
31 October
1 November
Full day Secretariat Preparation
15.30 Registration desk open @ ANVAYA
07.00 – 08.15 Registration
08.15 – 10.00 Opening Session
10.00 – 10-15 Coffee break
10.15 – 12.00 Plenary Lectures 1
12.00 – 13.00 LUNCH
13.00 – 15.30 Parallel Session 1.
15.30 – 16-00 Coffee break
16.00 – 18.00 Poster Session
16.00 – 21.00 Welcome Dinner (Invitation Only)
08.00 – 10.00 Plenary Lectures 2
10.00 – 10-15 Coffee break
10.15 – 12.00 Parallel Session 2
12.00 – 13.00 LUNCH
13.00 – 15.30 Parallel Session 3
15.30 – 16.00 Coffee break
16.00-17.00 Plenary Lectures 3
17.00-17.30 Transfer to ANVAYA SANDS RESTAURANT
(All participants)
18.00 – 21.00 Banquet & Traditional Dance
2 November
07.30 - 08.30 Transfer to Udayana University
08.30 – 09.00 Opening
09.00 – 11.30 Plenary Lectures 4
11.30– 13.00 LUNCH
13.00 – 13.30 Transfer to GWK
13.30 – 14.00 Around GWK (at Bus)
14.00 – 15.00 Transfer to ULUWATU
15.00-16.00 Sightseeing at ULUWATU
16.00 – 17.00 Ready at the Stage
17.00-19.00 RAMAYANA & KECAK DANCE
19.00 – 21.00 Transfer to Hotel (no Dinner)
3 November 08.00-17.00 Optional /Cultural Tour : Ubud, Tanah Lot Temple
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
TIME/DATE TUESDAY
30 OCTOBER 2018
WEDNESDAY
31 October 2018
THURSDAY
1 November 2018
FRIDAY
2 November 2018
SATURDAY
3 November 2018
08.00 – 08.30
OPENING PLENARY 2
PLENARY 4
LECTURES
@ UDAYANA
UNIVERSITY
CULTURAL TOUR
(OPTIONAL)
08.30 – 09.00
09.00 – 09.30
09.30 – 10.00
10.00 – 10.30
INTERNATIONAL
SYMPOSIA
(PARALLEL 2)
10.30 – 11.00 PLENARY 1
11.00 – 11.30
11.30 – 12.00
12.00 – 13.00 LUNCH BREAK
13.00 – 13.30
INTERNATIONAL
SYMPOSIA
(PARALLEL 1)
INTERNATIONAL
SYMPOSIA
(PARALLEL 3)
EXCURSION
TO
ULUWATU
(KECAK DANCE)
13.30 – 14.00
14.00 – 14.30
14.30 – 15.00
15.00 – 15.30
REGISTRATION
&
CHECK-IN
15.30 – 16.00 COFFEE BREAK COFFEE BREAK
16.00 – 16.30
PLENARY 3
16.30 – 17.00
POSTER SESSION 17.00 – 17.30
BANQUET
@ ANVAYA
AWARD CEREMONY
17.30 – 18.00
18.00 – 21.00
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Program Schedule Wednesday, 31 October 2018
07.00 Registration
OPENING
Room Ballroom (1st floor).
Chair Prof. Dr. Akhmad Herman Yuwono (UI, Indonesia)
08.00 Report from Chairperson
Prof.Dr. Anne Zulfia (UI Indonesia)
08.10 Greeting from President MRS-INA
Prof. Dr. Evvy Kartini (BATAN Indonesia)
08.20 Opening Remarks from Chair of Presidential Advisory Council
Prof. Dr. Sri Adiningsih Accompanied by Rector of Udayana
08.40
P.1.1. Prof. Dr. Soo Wohn Lee
Greeting from President IUMRS (Korea)
09.00
P.1.2 General Luhut Binsar Panjaitan
Plenary Lecture from Coordinator Minister for Maritime Affairs (Indonesia)
09.30 Collaboration and signing MoU Photo Session
09.45 Coffee break
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Wednesday, 31 October 2018
Plenary Lectures 1.
Room Ballroom (1st floor).
Chair Dr. Jamie Schultz (Drector of ACNS-ANSTO, Australia)
10.00
P.1.3. Prof.Dr. Djarot S. Wisnubroto
(Chairman of BATAN, Indonesia)
10.30 P.1.4. Prof. Dr.Rodrigo FP Martin
(President of EuASc, Portugal) “Designing the Future with Functional Materials”
11.00
P.1.5 Prof. Dr. Thomas Proffen
(Director of SI-ORNL, USA) “Advances in Structural Analysis of Disordered and Nano-Crystalline Materials
using Neutron and X-ray Total Scattering”
11.30 P.1.6 Prof.Dr. Chennupati Jagadish
(President MRS-Australia) “Semiconductor Nanowires for Optoelectronics Applications”
12:00 LUNCH
@KUNYIT RESTAURANT
13.00 PARALLEL SESSION 1
15.30 COFFEE BREAK
16.00 POSTER SESSION @ Ball Room
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Program Schedule Thursday, 1 November 2018
Plenary Lectures 2
Room Ball Room
Chair Prof. Dr. Jim S Williams (Conference Chair, IUMRS, Australia)
08.00
P.2.1. Prof.Dr.B.V.R. Chowdary (President MRS-Singapore; NTU-Singapore)
“Introduction to MRS Singapore and Recent Developments in IUMRS”
08.20
P.2.2. Prof. Dr.Elvira Fortunato
(Director Cenimat, Portugal)
“Sustainable emerging materials for advanced thin film electronics”
08.40
P.2.3. Prof.Dr.Toshiji Kanaya
(Director of J-PARC MLF, Japan) “Materials researches in Materials and Life Science Experimental Facility (MLF)
at J-PARC”
09.20
P.2.4. Prof.Dr.Evvy Kartini
(President MRS-INA; BATAN, Indonesia)
“Prospect of Lithium Ion Battery in Indonesia”
09.40
P.2.5. Dr. Jong Yeon Kim (CEO TAOS Co. Korea.)
10:00 Coffee Break
10:30 PARALLEL SESSION 2
12.00 LUNCH @ KUNYIT RESTAURANT
13.00 PARALLEL SESSION
15:30 COFFEE BREAK
16.00 PLENARY 3
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Thursday, 1 November 2018 Plenary Lectures 3
Room Ball Room
Chair Prof. Dr. Rodrigo Martin (MRS-Europe, VP IUMRS, Portugal)
16.00
P.2.3. Dr. Jamie Schultz
(Director ANSC, ANSTO, Australia) “Overview of the Neutron Beam Capabilities at the OPAL Research Reactor”
16.20
P.2.4. Dr. Paul Horng
(Industrial Technology Research Institute, Taiwan) “Introduction of Material Chemical Laboratories, Industrial Technology
Research Institute and Lithium Battery Materials Development for Energy Application”
16.40
P.2.5. Prof. Dr. Masatomo Yashima
(Tokyo Institute of Technology, Japan)
“Exploration and Ion-Diffusion Mechanism of New Structure-Type Ion Conductors”
17.00
Announcement
Transfer to SANDS RESTAURANT ANVAYA
18.00-21.00
BANQUET @ SANDS ANVAYA
AWARDS CEREMONY
TRADITIONAL DANCE
Sands Restaurant Anvaya Resort Bali
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Program Schedule Friday, 2 November 2018
PLENARY LECTURE 4
Room AUDITORIUM @ UDAYANA UNIVERSITY
Chair Prof. Dr. Evvy Kartini (President of MRS-INA, President of INSS,
BATAN, Indonesia)
08.30 Opening
Dean of UNUD
09.00
P.4.1. Prof. Dr. Brendan Kennedy
President AONSA; Sydney University, Australia “In-Situ Synchrotron X-Ray and Neutron Diffraction Studies of Uranium
Oxides”
09.30
P.4.2 Prof. Dr. Matteo Leoni
Director of ICDD, Italy
“Modern microstructure analysis by diffraction beyond Scherrer equation”
10.00
p.4.3 Prof. Dr. Stefan Adams*
NUS, Singapore
10.30
P.4.4 Prof. Dr. Yafang Han
VP IUMRS; MRS-China; Chief Editor PNMS
11.00 Photo Session CLOSING
11.30 LUNCH
13.00 TRANSFER TO ULUWATU
17.00 KECAK DANCE
20.00 RETURN TO HOTEL ANVAYA
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSIONS (CHAIRS & KEYNOTES SPEAKERS)
International Symposia
Room 1
(Celagi)
Room 2
(Cemara)
Room 3
(Cempaka)
Room 4
(Kemiri)
Room 5
(Kesuna)
Room 6
(Kelapa)
Room 7
(Kemangi)
EEM AFSM PBSM MPC MPC CMMS NST
C.1.1
Takashi
Kamiyama
C.1.2
Elvira
Fortunato
C.1.3.
T.Kanaya
C.1.4
Yukinobu
Kawakita
C.1.5.
Thomas
Proffen
C.1.6.
Matteo
Leoni
C.1.7
Shahidan
Radiman
K.1.1
Rudi
Harjanto
K.1.2
Akhmad H
Yuwono
K.1.3
Christine
Rehm
Ru-Shi Liu
K.1.4
I Made
Dana M.
Tangkas
Wutthikarai
Busayatorn
K.1.5
Shinji
Kohara
K.1.6
Nicholas
Harrison
K.1.7
Tsong-Pyng
Perng
Lan Fu
EEM AFSM PBSM MPC MPC CMMS PBSM+EEM
C.2.1
Paul
Horng
C.2.2
Yafang
Han
C.2.3
Clarina R.
Dela Cruz
C.2.4
Taik Nam
Kim
C.2.5
Shaoqing
Weng
C.2.6
Nicholas
Harrison
C.2.7
Santi Maensiri
K.2.1
Do Kyung
Kim
Takashi
Kamiyama
K.2.2.
Soo Wohn
Lee
K.2.3
Anne Zulfia
Pakorn
Opaprakasit
K.2.4
Shahidan
Radiman
K.2.5
Jim S
Williams
K.2.6
Yuan Ping
Feng
K.2.7
Hirofumi
Tanaka
EEM AFSM PBSM MPC MPC CMMS NSTA+Other
C.3.1
Do Kyung
Kim
C.3.2
Masatomo
Yasima
C.3.3
Lan Fu
C.3.4
Tsong Ping
Feng
C.3.5
Ru-Shi
Liu
C.3.6
Yuan Ping
Feng
C.3.7
Christine
Rehm
K.3.1
Santi
Maensiri
K.3.2
Nobuyuki
Iwata
Jakrapong
Kaewkhao
K.3.3
Yukinobu
Kawakita
K.3.4
Taik Nam
Kim
K.3.5
Isao
Watanabe
K.3.6
Shaoqing
Wang
K.3.7
Clarina R. Dela
Cruz
Evvy
Kartini/Maykel
Manawan
C.#.n : Chair, Parallel #,Symposia n ; K.#.n : Keynote, Parallel #,Symposia n
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION (ORAL PRESENTATION)
Room 1
(Celagi)
Room 2
(Cemara)
Room 3
(Cempaka)
Room 4
(Kemiri)
Room 5
(Kesuna)
Room 6
(Kelapa)
Room 7
(Kemangi)
Parallel
Session
1
EEM O1-
O10 ,O27
AFSM
O1-O10
PBSM O1-
O10
MPC O1-
O9
MPC
O11-O20
CMMS
O1-O9
NST O1-
O9
Parallel
Session
2
EEM
O11-O15
AFSM
O11-
O14, -
O18
PBSM
O11-O15
MPC
O21-
O25,
O45,
O10
MPC O26
-O29,
O47
CMMS
O3,
O11-
O15
EEM O16-
O18
PBSM
O16, O18,
O28
Parallel
Session
3
EEM
O19-O26
AFSM
O19-O23
PBSM O9,
O19-O25
MPC
O30-O36
MPC
O37-O43
CMMS
O16-
O22
PBSM O26
NSTA O1-
O3
SSH-O1
OTHER
O1-O2
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.1 Wednesday, 31 October 2018
International Simposia on Energy Environment Materials (EEM)
Room 1 (Celagi)
Chair Takashi Kamiyama
Co-Chair : Sudaryanto
13.00-
13.20
K1.1.1 Rudi Harjanto
Infinity Energy Creates A Better Life
13.20-
13.40
K1.1.2
13.40-
13.50
EEM-
O1
Lukman Noerochim
Effect of acetylene gas and milling time on the electrochemical
performance of Li4Ti5O12
13.50-
14.00
EEM-
O2
Michal Petrů
Tensile Properties of Glass Roving and Hybrid Tapes
14.00-
14.10
EEM-
O3
Adlan Mizan
Synthesis and Deposition of High Crystallinity Cu2ZnSnS4 (CZTS)
Using Dip Coating Method
14.10-
14.20
EEM-
O4
Nirmal Kumar Velu
Thermoelectric studies on III-V binaries: GaSb and InSb solid
solutions doped with In and Ga elements
14.20-
14.30
EEM-
O5
Sutripto Majumder
First report on Bi2O3/PbS heterojunction nanostructured thin film
photoelectrode for enhancing photoelectrochemical water splitting
14.30-
14.40
EEM-
O6
Arum Cahyanurani Setyabrata
The Effect of Sodium Carbonate Addition on the Reduction Process of
Nickel Slag with Different Temperature and Additive Ratio
14.40-
14.50
EEM-
O7
Arenst Andreas Arie
Synthesis and application of Salacca peel based hierarchical porous
carbons as cathodes for lithium sulfur battery
14.50-
15.00
EEM-
O8
Kwunta Siwawongkasem
The influence of hydrothermal temperature in hierarchically
manganese oxides on titanate nanotubes materials and their
electrochemical properties
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
15.00-
15.10
EEM-
O9
Rahmat Hidayat
Towards lithium ion batteries with pure ionic liquid for improving the
safety of electric vehicles
15.10-
15.20
EEM-
O10
Thalhah Hanif Ramadhan
Improvement of Li4Ti5O12 nanorod anode performance through Sn
Doping and Carbon Coating for Lithium Battery Aplication
15.20-
15.30
EEM-
O27
Neni Sintawardani
The Performance of Pedal Mixing Composting-Toilet System Using
Corn Stalks as the Decomposition Media for Feces and Feces-Urine
Mixture
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.2 Wednesday, 31 October 2018
International Simposia on Advanced Functional and Structural Materials (AFSM)
Room 2 (Cemara)
Chair Elvira Fortunato
Co-Chair : Azwar
13.00-
13.20
K1.2.1 Akhmad H Yuwono
13.20-
13.40
K1.2.2
13.40-
13.50
AFSM -
O1
Teguh Ariyanto
Hollow Core Carbide-Derived Carbon for High Power Electric
Double Layer Capacitors
13.50-
14.00
AFSM -
O2
Muhammad Abiyyu Kenichi Purbayanto
The effect of nanostructure on the excitonic properties of ZnO
14.00-
14.10
AFSM -
O3
Novrita Idayanti
Structural and magnetic properties of crystallite clusters in
composites SrFe12O19/CoFe2O4 magnets
14.10-
14.20
AFSM -
O4
Jiri Militky
Selected Application of Linear Composites Containing Side Emitting
Optical Fibres
14.20-
14.30
AFSM -
O6
Irma Tri Aryani
The Study of Final Tin Slag as Partial Substitution in Portland based
Concrete towards Corrosion Resistance of Reinforcement Steel
against Chloride Environment with Linear Polarization Method
14.30-
14.40
AFSM -
O7
Souvanik Talukdar
Developing Multifunctional Magnetic ZnFe2O4 nanohollowspheres
for Drug Delivery by Facile Surface Modification
14.40-
14.50
AFSM -
O8
Asep Ridwan Setiawan
The Effect of Zn on Biodegradation and Strength of as-Cast Mg-Zn
Alloys Fabricated from Mg anode source
14.50-
15.00
AFSM -
O9
Muhammad Ibnu
The Study of the Effect of Slag Ferronickel Substitution (FNS) in
Portland Concrete on Corrosion Resistance of Reinforced Steel in
Chloride Environment with Cyclic Polarization Method
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
15.00-
15.10
AFSM -
O10
Sadra Partogi Panjaitan
Characteristic of ZnO Nanorod Grown on a Glass Substrate via
Chemical Bath Deposition at Different Reaction Time and
Precursors Concentration
15.10
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.3 Wednesday, 31 October 2018
International Simposia on Polymer-, Bio- and Soft Materials (PBSM)
Room 3 (Cempaka)
Chair Toshiji Kanaya
Co-Chair : Anne Zulfia
13.00-
13.20
K1.3.1 Cristine Rehm
Neutron Scattering Applications in the Area of Advanced Food Technology
13.20-
13.40
K1.3.2 Ru-Shi Liu
Silicon Microwire Arrays with Amorphous Heterometal-doped
Molybdenum Sulfide Cocatalysts for Water Splitting
13.40-
13.50
PBSM -
O1
Mahyuni Harahap
Wet-spinning of Cellulose Acetate Reinforced with Acetylated Nano-
crystalline Cellulose for Manufacturing Carbon Fibre
13.50-
14.00
PBSM -
O2
Yuriko Takayama
Multiple parallel gel filaments prepared by shear-induced
deformation of the polymer assembly
14.00-
14.10
PBSM -
O3
Norihiro Kato
Inhibitory control of the bacterial communication system using
functional polymer gels
14.10-
14.20
PBSM -
O4
Mohanapriya Venkataraman
Aerogel based high performance thermal insulation materials
14.20-
14.30
PBSM -
O5
Rajesh Mishra
Basalt based Hybrid Fabrics for Composites
14.30-
14.40
PBSM -
O6
Arif Rachman
Synthetic scaffold and natural scaffold with x-ray diffraction
simulation
14.40-
14.50
PBSM -
O7
Ekwipoo Kalkornsurapranee
Shape Memory Thermoplastic Natural Rubber for Forensic
Applications
14.50-
15.00
PBSM -
O8
Nussana Lehman
Enhancing properties of cured NR/PVA blends using Glutaraldehyde
as a Crosslinking Agent: Effect of Nano-Clay Loading
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
15.00-
15.10
PBSM -
O10
Gina Ayu Wardhani
Influence on Polymerization Techniques to Electrical Conductivity of
Polypyrrole (PPy) Based Polymers
15.10
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.4 Wednesday, 31 October 2018
International Simposia on Materials Processing and Characterization (MPC)
Room 4 (Kemiri)
Chair Yukinobu Kawakita
Co-Chair : Ari S/Dwi
13.00-
13.20
K1.4.1 Ir. I Made Dana M. Tangkas, M. Si.
Director of PT. Toyota Motor Manufacturing Indonesia
13.20-
13.40
K1.4.2
(MPC -
O7)
Wutthikrai Busayaporn
Local Structure Evolution in AlN Thin Film Studied by Soft X-ray
Absorption Spectroscopy
13.40-
13.50
MPC -
O1
Ken Hashigata
Electrodeposition of Gold on Titanium and Bending Test of Au-Ti Bi-
Layered Micro-Cantilever
13.50-
14.00
MPC -
O2
Annida Jihan Maulida
The Effect of Thermo Reactive Diffusion (TRD) Processing Time With
Ferrochromium Powder On Carbide Layer Characteristics On SUJ 2 Tool
Steel Substrate
14.00-
14.10
MPC -
O3
Rochimb Cahyono
Improvement morphology of low grade iron ore by dehydration process
for ironmaking industry : effect of pressure and heating rate
14.10-
14.20
MPC -
O4
Adimas Habib Iqbal
The Effect of Neodymium Rare Earth Element Addition on the
Solidification Process of Al-5Zn-0,5Cu Alloy Sacrificial Anode
14.20-
14.30
MPC -
O5
Jako Aprilio Sibuea
Study of Al-Zn-Cu-Sm Efficiency for Low-Voltage Sacrificial Anode
Candidate
14.30-
14.40
MPC -
O6
Muhammad Panji Wiguna
Product Characteristics of Thermo Reactive Deposition JIS-SUJ2 Steel
Treatment with Fe-Cr Coatings Powder on Process Temperature
Variations
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
14.40-
14.50
MPC -
O8
Anis Sa'Adah
Effect of temperature and holding time of second stage on nickel grade
and recovery in two-stage thermal upgrading of low-grade nickeliferous
laterite ore
14.50
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.5 Wednesday, 31 October 2018
International Simposia on Materials Processing and Characterization (MPC)
Room 5 (Kesuma)
Chair Thomas Proffen
Co-Chair : Ayu
13.00-
13.20
K1.5.1 Shinji Kohara
Structure of high-temperature liquid oxides revealed by quantum
beam diffraction measurements, thermophysical properties
measurements and advanced computer simulations
13.20-
13.40
K1.5.2
13.40-
13.50
MPC -
O11
Sovian Aritonang
The Process of Processing Iron Sand into Permanent Magnets in
Supporting the Independence of Components for Defense Industrial
Products
13.50-
14.00
MPC –
O12
Achmad Fauzi Trinanda
Effect of Heat Treatment on Microstructure and Mechanical
Properties of Mg-Al-Sr Reinforced Nano-SiC Composite
14.00-
14.10
MPC –
O13
Chinh Nguyen Duc
Nano-hybrid of Molybdenum oxide and SWCNT for ethanol sensing at
room-temperature
14.10-
14.20
MPC –
O14
Hung Nguyen Manh
Thick Film Sensors of WO3/CNT Nanocomposite to detect NO2 Gas
14.20-
14.30
MPC –
O15
B A Hardianto Bancin
The influence of spray distance of Thermal Sprayed Aluminum (TSA)
on its corrosion resistance and bond strength
14.30-
14.40
MPC –
O16
Alaa Keshtta
Effect of Sn addition on the properties of the biomedical Ti-17Nb-6Ta
alloy.
14.40-
14.50
MPC –
O17
Teguh Endah Saraswati
Synthesis and Structural Characterization of Multiwalled Carbon
Nanotube Growth in Chemical Vapor Deposition using Iron
oxide/Carbon Catalyst
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
14.50-
15.00
MPC –
O18
Wahyuaji Narottama Putra
Effect of FeCr/FeV Ratio During Thermo-Reactive Deposition(TRD)
Process on Mechanical Properties and Characteristics of Carbide
Layer of SUJ2 Steel
15.00-
15.10
MPC –
O19
Nanang Sudrajat
Reduced Remanence to Coercivity Increase Ratio of Pr11,76-
xDyxFe82B6 (x = 0; 1; 2; 3) Permanent Magnets
15.10-
15.20
MPC –
O20
Raden Dadan Ramdan
Mechanical Properties and Microstructure at Stainless Steel HAZ from
Dissimilar Metal Welding After Heat Treatment Processes
15.20
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.6 Wednesday, 31 October 2018
International Simposia on Computational Materials, Modeling and Simulation (CMMS)
Room 6 (Kelapa)
Chair Matteo Leoni
Co-Chair : Maykel Manawan
13.00-
13.20
K1.6.1 Nicholas Harrison
Molecular Electronics: Novel Materials for Room Temperature
Spintronics in Thin Films
13.20-
13.40
K1.6.2
13.40-
13.50
CMMS
-O8
Hira Meidia
Brownian Dynamics Simulation of Colloidal Gels as Matrix for
Controlled Release Applications
13.50-
14.00
CMMS
-O1
Gagus Ketut Sunnardianto
Desorption pathways of hydrogenated graphene vacancy for
hydrogen storage application
14.00-
14.10
CMMS
-O2
Shibghatullah Muhammady
The modifications of structural and optical properties of ZnO induced
by elemental defects: A first-principles study
14.10-
14.20
CMMS
-O4
Qoimatul Mustaghfiroh
Dynamic Magnetization Observation of Square Model CoFe and
CoFeB Ferromagnetic Materials Using Micromagnetic Simulation
14.20-
14.30
CMMS
-O5
Sulaiman Hawibowo
Micromagnetic Study of Domain Wall Motion in FePt and FePd
Nanowires Triggered by Sub-nanosecond Pulse of Magnetic Field
14.30-
14.40
CMMS
-O6
Agung Yudistira
The Chemisorption Study of Dimer-hydrogen Configuration on the
Graphene Surfaces: Flat and Buckling
14.40-
14.50
CMMS
-O7
Miyah Sofani
Sensitivity of Localized Surface Plasmon Resonance (LSPR) Au
Nanorod with Methylene Blue Medium Using Boundary Element
Method Simulation
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
14.50-
15.00
CMMS
-O9
Candra Kurniawan
Investigation of Notch Dept Effect on Domain Wall Depinning in
Ferromagnetic Nanowires by Micromagnetic Simulation
15.00
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 1.7 Wednesday, 31 October 2018
International Simposia on Nano Science and Technology (NST)
Room 7 (Kemangi)
Chair Shahidan Radiman
Co-Chair : Leli
13.00-
13.20
K1.7.1 Tsong-Pyng Perng
Design and Validation of Forced Flow Atomic Layer Deposition for
Conformal Coating on Complex Substrates with High Aspect Ratio
13.20-
13.40
K1.7.2 Lan Fu
InP Nanowire based Optoelectronic Devices
13.40-
13.50
NST-O1 Desak Gede Sri Andayani
Production of Nanobiocontrol Agent in Molasses and Tofu Liquid
Waste Media by Streptomyces sp. TT10
13.50-
14.00
NST–O2 Saharman Gea
Preparation of polyvinyl alcohol/ cellulose nanofiber
nanocomposite isolated from empty oil palm fruit bunches
14.00-
14.10
NST–O3 Truong-Giang Vo
Promoting surface charge utilization by incorporating novel ternary
ZnCoMn layered double hydroxide nanowall with bismuth vanadate
for efficient photoelectrochemical water oxidation
14.10-
14.20
NST-O4 Yuki Taniguchi
End-to-End Self-Assembly of Semiconductor Nanocrystals with
Amphiphilic Surface Design in Water
14.20-
14.30
NST-O5 Ramzul Irham Riza
Thermal Conductivity and Cooling Rate Observation in Quenching
Process Using Carbon Nanofluids for S45C Carbon Steel and SKD11
Tool Steel
14.30-
14.40
NST-O6 Weerachon Phoohinkong
Mn3O4 Hausmannite-Carbon nanocomposites derived from
Carbonization of Nano-Manganese Oxide-Cellulose
14.40-
14.50
NST-O7 Rajeev Kumar
Nitrogen-doped carbon encapsulated iron-cobalt nanoparticles
derived from pyrolysis as robust catalysts
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
14.50-
15.00
NST-O8 Manjunatha M
59Co NMR study of cobalt nanoparticles synthesized via wet
chemical method using sodium borohydride as a solvent
15.00-
15.10
NST-O9 Muhamad Nasir
Heat Treatment Effect on Activated Nano Carbon/ Polyvinyl Alcohol
Nanofiber Composite: Nanostructure Properties and Crystallinity
Study
15.10-
15.20
NST-
O10
Lisda Ainiya Ahmad Barkat
Synthesis and Electrochemical Characterization of LiFePO4 By
Addition Of 10%(Li3PO4)0.5(AgI)0.25(LiI)0.25 as Cathode Material
For All-Solid-State Li-ion Battery
15.30 Coffee Break
16.00-
18.00 POSTER SESSION
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.1 Thursday, 1 November 2018
International Simposia on Energy Environment Materials (EEM)
Room 1 (Celagi)
Chair Paul Horng
Co-Chair : Sudaryanto
10.15-
10.35
K2.1.1 Takashi Kamiyama
Crystallography in Functional Materials
10.35-
10.55
K2.1.2 Do Kyung Kim
Design, Synthesis and Electrochemical Characterizations of Electrode
Materials for Lithium-Sulfur Batteries
10.55-
11.05
EEM -
O11
Subhan Achmad
Structure and electrochemical performance of Li(Mn2-x-yNixAly)O4
synthesized with minimum Ni and Ni/Al dual-doping
11.05-
11.15
EEM –
O12
Sabdoyono Harimurti
Management of Bengawan Jero as Source Water Irrigation and
Drainage
11.15-
11.25
EEM –
O13
Siriporn Phongtongpasuk
Effect of pH on the environmentally friendly fabrication of silver
nanoparticles using rambutan peel extract
11.25-
11.35
EEM –
O14
Gajanan Honnavar
Effect of molar volume on the interaction between mobile ions in
mixed alkali oxyfluoro vanadate glasses: An Electrical modulus
analysis
11.35-
11.45
EEM –
O15
Indra Gunawan
Synthesis and characterization of graphene from coconut fiber (cocos
nucifera) as anode materials for li-ion battery
11.45
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.2 Thursday, 1 November 2018
International Simposia on Advanced Functional and Structural Materials (AFSM)
Room 2 (Cemara)
Chair Yafang Han
Co-Chair : Azwar
10.15-
10.35
K2.2.1
(AFSM-
O12)
Soo Wohn Lee
Modified α-NiMoO4 Photocatalyst for Dyes/Drugs Degradation and
Antibacterial Application
10.35-
10.55
K2.2.2
10.55-
11.05
AFSM-
O11
Wang Yanlong
Strain-engineered Phonon and Band Gap Modification in 2D
Materials
11.05-
11.15
AFSM-
O13
Deni Haryadi
Study of First Principle Of Mg-Si binary system as Precipitate from
T6 Heat treatment at Al alloys
11.15-
11.25
AFSM-
O14
Haris Rudianto
Manufacturing Technique of Graphene Reinforced Aluminum Matrix
Nanocomposite
11.25-
11.35
AFSM –
O18
Dedi Mada
Magnetic and Electromagnetic Wave Absorption Characteristics of
BaFe11Ti0.5Zn0.5O19 in X Band
11.35
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.3 Thursday, 1 November 2018
International Simposia on Polymer-, Bio- and Soft Materials (PBSM)
Room 3 (Cempaka)
Chair Clarina R Dela Cruz
Co-Chair : Ayu
10.15-
10.35
K2.3.1 Anne Zulfia
10.35-
10.55
K2.3.2 Pakorn Opaprakasit
Synthesis and Quantitative Analyses of Acrylamide Grafted
Poly(lactide-co-glycidyl methacrylate) Amphiphilic Copolymers for
Use in Environmental and Biomedical Applications
10.55-
11.05
PBSM –
O11
Ihda Novia Indrajati
Relaxation behavior of natural rubber composites through assessing
the tension and compression set
11.05-
11.15
PBSM –
O12
Noor Maryam Setyadewi
Shape memory behavior of shape memory natural rubber
11.15-
11.25
PBSM –
O13
Asep Ridwan Setiawan
Biodegradation behavior of as-cast Mg-Zn-Ca alloys fabricated from
different Mg source
11.25-
11.35
PBSM –
O14
Oceu Dwi Putri
Utilization of Soy Wax in Improving Water Resistance Properties of
Starch-based Bioplastics
11.35-
11.45
PBSM –
O15
Anti Khoerul Fikriyyah
Fabrication and characterization of poly lactic acid (PLA)-starch
based bioplastic composites
11.45
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.4 Thursday, 1 November 2018
International Simposia on Materials Processing and Characterization (MPC)
Room 4 (Kemiri)
Chair Taik Nam Kim
Co-Chair : Ari S/Dwi
10.15-
10.35
K2.4.1 Shahidan Radiman
Improving Sensitivity of Radiophotoluminescence Glass Dosimeter by
Ag Nanoparticles Doping
10.35-
10.55
MPC -
O10
Ciswandi
Microstructure, Phases Transformation and Hardness of Sintered Fe-
Mo-Si Alloys Prepared by Powder Metallurgy Technique
10.55-
11.05
MPC –
O21
Reza Fawazul
Effect of FeV Recycled Powders as an Innovation of Thermo Reactive
Deposition Process (TRD) with Material Balance Method to Carbide
Surface Characteristics on SUJ2 Tool Steel
11.05-
11.15
MPC–
O22
Weerachon Phoohinkong
Preparation, Characterization, Electrochemical and Catalytic
Properties of Hybrid Zinc Oxide-protein Bionanocomposite
11.15-
11.25
MPC–
O23
Fuad Adnan
Effect of Sn on Mechanical Properties and T6 Heat Treatment
Behavior of Cast Al-Si Alloy
11.25-
11.35
MPC–
O24
Hery Sulistyo
Effect of Cu on Mechanical Properties and T6 Heat Treatment
Behaviour of Cast Al-Si Alloy
11.35-
11.45
MPC–
O25
Angga Khairul Fahmi
Sintering and Post Sintering Treatment of Fe Based Alloy Powder
11.45-
11.55
MPC-
O45
Muhammad Faris Ghiyats
The effect of rice husk as the reduction agent in reduction of titanium
from iron sand
11.55
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.5 Thursday, 1 November 2018
International Simposia on Materials Processing and Characterization (MPC)
Room 5 (Kesuna)
Chair Shaoqing Wang
Co-Chair : Ayu
10.15-
10.35
K2.5.1 Jim S Williams
Hyperdoping of Si using ion beam and pulsed laser melting techniques
to realise efficient near-to-mid infrared Si-based photodetectors
10.35-
10.55
K2.5.2
10.55-
11.05
MPC-
O26
Nuraziz Handika
Evaluation of Loading Rate to the Stress-Strain Response of
Reinforcing Steel Bar
11.05-
11.15
MPC-
O28
Harish Kumar Choudhary
57Fe NMR spectroscopy studies of Barium, Lead and Strontium
hexaferrites samples synthesized using solution combustion method
11.15-
11.25
MPC-
O29
Christian Christian
Evaluation of Temperature Changes Effect to Dynamic Performances
of a Pinned-supported Steel-arch-bridge
11.25-
11.35
MPC-
O47
Dwi Rahmalina
Effect of the Processing Parameters on the Shrinkage Defect Using A
High-Pressure Die-Casting Process
11.35
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.6 Thursday, 1 November 2018
International Simposia on Computational Materials, Modeling and Simulation (CMMS)
Room 6 (Kelapa)
Chair Nicholas Harrison
Co-Chair : Akhmad H Yuwono
10.15-
10.35
K2.6.1 Yuan Ping Feng
2D Materials: Genome, Discovery and Applications
10.35-
10.55
K2.6.2
10.55-
11.05
CMMS -
O3
Ghiska Ramahdita
3D-modelling and casting simulation for the fabrication of
megaprosthesis implant by vacuum centrifugal casting
11.05-
11.15
CMMS –
O12
Haris Rudianto
Effects of Chemical Compositions on Properties of Dual Composites
Gas Atomized Al-Si and Al-Si-SiC Powder
11.15-
11.25
CMMS –
O13
Syaiful Rachman
Modeling of Fluid-Fluid Interaction With Different Density and
Viscosity Using Smoothed Particle Hydrodynamics Method
11.25-
11.35
CMMS –
O14
Muhammad Irham Sya'Bani
Testing of Smoothed Particle Hydrodynamics Method For Minor
Loss In Three-Dimensional Water Flow In Circular Vertical Pipe
Contraction
11.35-
11.45
CMMS –
O15
Anisa Wulandari
Investigation of Stiffness Coefficient (Ks) and Damping Coefficient
(Kd) Value on Numerical and Physical Parameters of Smoothed
Particle Hydrodynamics (SPH) on Fluid-Solid Interaction
Phenomenon
11.45
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 2.7 Thursday, 1 November 2018
International Simposia on Energy Environment Materials (EEM) and Polymer-, Bio-
and Soft Materials (PBSM)
Room 7 (Kemangi)
Chair Santi Maensiri
Co-Chair : Leli
10.15-
10.35
K2.7.1 Hirofumi Tanaka
Neuron like pulse generation by SWNT/POM random network
10.35-
10.55
K2.7.2
10.55-
11.05
EEM–
O16
Inas Sharfina Rahmah
Impact of Cellulase Addition on Microbial Population Dynamics and
Bio-Stabilization in Organic Waste Biodrying
11.05-
11.15
EEM–
O17
Syifa Aulia Rahmah
Compost Maturity Analysis with Static Respirometry Method
11.15-
11.25
EEM–
O18
Hsi-Wen Yang
The Effect of Zirconia Doping on the Properties of Soda-lime Glass
11.25-
11.35
PBSM
–O16
Erich Umbu Kondi Maliwemu
Corrosion Resistance of 316L Biomaterial in Simulated Body Fluid by
Shot Peening in Modification of Shot Distance and Shot Angle
11.35-
11.45
PBSM
–O18
Thalhah Hanif
Effects of lignin addition on ductility and penetration of high density
polyethylene modified bitumen mixture
11.45-
11.55
PBSM-
O28
Febri Ramdani Nugraha
Novel Salt Leached Porous Silk Fibroin Scaffold Using Direct
Dissolution Techniques For Tissue Engineering
12.00 LUNCH @ KUNYIT RESTAURANT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Room 1 (Celagi)
Chair Do Kyung Kim
Co-Chair : Sudaryanto
13.00-
13.20
K3.1.1 Santi Maensiri
Electrospun Nanocomposites of Carbon-based Nanofibers for Energy
Storage
13.20-
13.40
K3.1.2
13.40-
13.50
EEM–
O19
Yin-Hsuan Chang
Magnetic Separable Fe3O4/Ag/TiO2 Nanofibers for Removal of
Hexavalent Chromium
13.50-
14.00
EEM–
O20
Ying-Han Liao
Tuning Metal-Doped TiO2 Electron Extraction Layer for High-
Performance Perovskite Solar Cells
14.00-
14.10
EEM–
O22
Iriani Yofentina
Effect of Strontium Mole (x) on Characteristics of Ba1-xSrxTiO3
Fabricated by Solid State Reaction Method
14.10-
14.20
EEM–
O23
Suphawi Chaisit
Effect of chemical activation ratio on electrochemical properties
derive from cassava starch for super capacitor
14.20-
14.30
EEM-
O26
Sudaryanto Sudayranto
Interfacial Properties of Solid Polymer Electrolyte for Lithium-Ion
Battery
14.30
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
17.30 TRANSFER TO SANDS RESTAURANT
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
PARALLEL SESSION 3.1 Thursday, 1 November 2018
International Simposia on Energy Environment Materials (EEM)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 3.2 Thursday, 1 November 2018
International Simposia on Advanced Functional and Structural Materials (AFSM)
Room 2 (Cemara)
Chair Masatomo Yasima
Co-Chair : Nofrizon
13.00-
13.20
K3.2.1 Nobuyuki Iwata
Fabrication of Novel Materials and its Magnetic Properties for
Electric Field Driven Magnetic Memory
13.20-
13.40
K3.2.2 Jakrapong Kaewkhao
Optical and Luminescence Materials from Ln3+
13.40-
13.50
AFSM –
O19
Yuda Aria Binangun
Effect of the Ratio of Sisal/Carbon on Tensile Properties of
Sisal/Carbon/Poly (methyl methacrylate) PMMA Hybrid Composites
13.50-
14.00
AFSM –
O20
Anawati Anawati
Enhancing the Electrochemical Corrosion of Magnesium Alloy
AMX601 by Acid and Alkaline Treatments
14.00-
14.10
AFSM –
O21
Wahyu Wuryanti
The Capacity of various Cold-Formed Steel Product in Indonesia
14.10-
14.20
AFSM –
O22
Herdi Ardiyana
The Influence of Yttrium on Corrosion Resistance and Strength of as-
Cast Mg-Y Binary Alloys Fabricated from Mg anode source
14.20-
14.30
AFSM –
O23
Methee Promsawat
Effects of poling on electrical properties of a flexible piezoelectric
composite with natural rubber matrix
14.30
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
17.30 TRANSFER TO SANDS RESTAURANT
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 3.3 Thursday, 1 November 2018
International Simposia on Polymer-, Bio- and Soft Materials (PBSM)
Room 3 (Cempaka)
Chair Lan Fu
Co-Chair : Anne Zulfia
13.00-
13.20
K3.3.1 Yukinobu Kawakita
Studies of Atomic Dynamics in functional energy materials by using
pulsed neutron beam
13.20-
13.40
K3.3.2
13.40-
13.50
PBSM
-O9
Ladawan Songtipya
Poly(lactic acid)-based Composites Incorporated with Spent Coffee
Ground and Tea Leave for Food Packaging Application
13.50-
14.00
PBSM
–O19
Fauzan Alfarisi
Analyzing the role of modified lignin on bitumen and polypropylene
mixture through ft-ir and fesem
14.00-
14.10
PBSM
–O21
Maritsa Nauva
Synthesis and Optimization of Carbon-based Nanofluid by
Comminution Process using Planetary Ball Mill and Sodium
Dodecylbenzene Sulfonate (SDBS) as Surfactant
14.10-
14.20
PBSM
–O23
Azwar Manaf
Increased Electrical Conductivity of Polypyrrole Through Emulsion
Polymerization Technique Assisted Emulsifier
14.20-
14.30
PBSM
–O24
Annisa Rifathin
The Roles of Processing Parameters on Structures and Mechanical
Properties of Polypropylene/Clay Nanocomposites
14.30-
14.40
PBSM
–O25
Arie Restu Nurhidayani
Synthesis of Tannin Fenol Formaldehyde (TPF) Copolymer from Ethyl
Acetate Extract of Green Tea Leaf (Camellia Sinensis) as Bioadhesive
Wood
14.40
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 3.4 Thursday, 1 November 2018
International Simposia Materials Processing and Characterization (MPC)
Room 4 (Kemiri)
Chair Tsong Pyng Perng
Co-Chair : Ari S/Dwi
13.00-
13.20
K3.4.1 Taik Nam Kim
Residue-free fabrication of suspended MoS2 nanosheets using a PMMA
transfer method
13.20-
13.40
K3.4.2
13.40-
13.50
MPC-
O31
Yus Rama Denny
Effect of precursor concentration and annealing temperature to
crystal structure, morphology of surface film and optical properties of
thin film zinc oxide using spray pyrolysis method
13.50-
14.00
MPC-
O32
Norman Subekti
Corrosion Inhibition by Acai Berries Extract for Corrosion of Carbon
steel in HCl Environment
14.00-
14.10
MPC-
O33
Yusmaniar Yusmaniar
Effects of adding TEOS for UPR/Core-Shell Fe3O4@SiO2 Composites
Nanoparticle from Iron Sand as Microwave Absorption Materials
14.10-
14.20
MPC-
O34
Gunawan Refiadi
Tensile properties of the lignocellulosic fibers extracted from Petung
Bamboo/Dendrocalamus asper and Ampel Hijau Bamboo/Bambusa
vulgaris
14.20-
14.30
MPC-
O35
Febri Ramdani Nugraha
Porous Architecture and Permeability Evaluation of Silk Fibroin
Scaffold from Direct Dissolution Salt Leaching Method
14.30-
14.40
MPC-
O36
Ni Nyoman Rupiasih
The Effect of Amount of Filler on the Structure and Physical Properties
of the Chitosan Composite Membranes
14.40
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 3.5 Thursday, 1 November 2018
International Simposia on Materials Processing and Characterization (MPC)
Room 5 (Kesuna)
Chair Ru-Shi Liu
Co-Chair : Dedi
13.00-
13.20
K3.5.1 Isao Watanabe
Muons and DFT, How to use for Studies of Electronic States of High-TC
Oxides
13.20-
13.40
K3.5.2
13.40-
13.50
MPC-
O37
Kowit Lertwittayanon
Tubular Al2O3 membrane fabrication through novel combined
processes of agar gelcasting and osmotic drying
13.50-
14.00
MPC-
O38
Yuda Bakti Zainal
Role of Zn Substitution on Improvement of Electromagnetic and
Microwave Absorption Characteristics of BaZnxTi(1-x)O3 (x= 0; 1/3;
½; 2/3; 1)
14.00-
14.10
MPC-
O39
Triannisa Rahmawati
Synthesis and Characterization of Biochar from Crab Shell by Pyrolysis
14.10-
14.20
MPC-
O40
Adi Farmasiantoro
Materials and Miniaturizing for Infra Red Sensors
14.20-
14.30
MPC-
O41
Tony Kristiantoro
Synthesis and Characterization of Bi2Te3 Thermoelectric Material
Using Cold Pressing and Sintering Method
14.30-
14.40
MPC-
O42
Ary Subagia I.D.G
Effect of Interlaminated Carbon and Basalt Fibre Reinforced Hybrid
Composites on Mode I Fracture Toughness
14.40-
14.50
MPC-
O43
I Nyoman Budiarsa
Determining of Strain Hardening Exponent Through Indentation Size
Effect (ISE) Of Vickers Hardness
14.50
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
PARALLEL SESSION 3.6 Thursday, 1 November 2018
International Simposia on Computational Materials, Modeling and Simulation (CMMS)
Room 6 (Kelapa)
Chair Yuan Ping Feng
Co-Chair : Maykel Manawan
13.00-
13.20
K3.6.1
(CMMS
–O16)
Shaoqing Wang
Robust algorithms of molecular vibrational spectrum calculation by
first-principles simulation
13.20-
13.40
K3.6.2
13.40-
13.50
CMMS
–O17
Muhammad Sujak Mk
The thickness effect on LSPR spectra of Au-nanorod coated TiO2 and
SiO2 studied by MNPBEM modeling
13.50-
14.00
CMMS
–O18
Muhammmad Hanif Abdurrahman
Molecular Dynamics Simulation of Hydrogen Adsorption on Silica
14.00-
14.10
CMMS
–O19
Nesy Fitria
Investigation the exponential decay of LSPR Ag nanorod-coupled with
side by side configuration using boundary element method
14.10-
14.20
CMMS
–O20
Ummaira Fadhilah
Investigation of Dynamic Magnetization in FePt and FePd Disk
Ferromagnets Using Micromagnetic Simulation
14.20-
14.30
CMMS
–O21
Thananchai Dasri
Tuning optical absorption property of core-shell structured TiO2@Ag
nanowire and nanosphere
14.30-
14.40
CMMS
–O22
I Made Gatot Karohika
Design of Forming Parameters for Corrugated Metal Gasket Product
14.40
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
17.30 TRANSFER TO SANDS RESTAURANT
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Room 7 (Kemangi)
Chair Christine Rehm
Co-Chair : Leli
13.00-
13.20
K3.7.1 Clarina R Dela Cruz
Opportunities in Quantum Materials Research using Neutrons at
ORNL’s Spallation Neutron Source and High Flux Isotope Reactor
13.20-
13.40
K3.7.2 Evvy Kartini/Maykel manawan
Neutron Study on Solid Electrolyte Li3PO4
13.40-
13.50
PBSM-
O26
Kritsada Phatcharasit
The Mechanical properties of Epoxidized Natural Rubber/Guar Gum
Blends for Conducting Polymer Application
13.50-
14.00
PBSM-
O27
Yogi Angga Swasono
Wood Plastic Composites From Waste Plastic Bags: Formula
Optimization Using Extreme Vertices Mixture Design
14.00-
14.10
NSTA-
O1
Yudi Sholihin
Remaining life and corrosion rate prediction of well casing material
in the Co2 environment by simulation model at north aceh
production field
14.10-
14.20
NSTA-
O2
Marlina Harahap
A paper based gamma ray indicator using red cabbage acid extract
14.20-
14.30
NSTA-
O3
Moch Setyadji
Characteristics of uranium dioxide (UO2) kernel produced by
sintering process using modified sintering reactor
14.30-
14.40
Other-
O1
Niswati Fathmah
Drug Release Profile and in vitro Degradation Properties of
Simvastatin-Loaded Hydrogel Gelatin
14.40-
14.50
Other-
O2
Sofian Rizal
Compression Method in JPEG Standard
14.50-
15.00
SSH-O1 Praptining Sukowati
Model of regional development policy based on community of
pondok pesantren in lamongan district
PARALLEL SESSION 3.7 Thursday, 1 November 2018
International Simposia on Polymer-, Bio- and Soft Materials (PBSM), Nuclear Science
and Technology Application (NSTA), and Other Related Topic
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
15.00
15.30 Coffee Break
16.00 PLENARY 3
17.00 ANNOUNCEMENT
17.30 TRANSFER TO SANDS RESTAURANT
18.00 BANQUET , AWARDS & TRADITIONAL DANCE (ALL PARTICIPANTS)
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
POSTER SESSION
POSTER SESSION Wednesday, 31 October 2018
16.00-18-00
Ball Room
EEM-POS1
Ivan Orlando
Effect of Activated Carbon Addition on Electrochemical Performance of
Li4Ti5O12/Nano Si Composite as AnodeMaterial for LIB
EEM–POS2
Ming-Chung Wu
Enhanced Performance of Perovskite Solar Cells Based on Lead-Reduced
Perovskite Absorber and Metal-Doped TiO2 Electron Extraction Layer
EEM–POS3
Ornuma Kalawa
Synthesis and electrochemical properties of polymer–solution prepared
MnCo2O4 nanoparticles
AFSM-POS1
Taro Yaeo
Optimization of Bioinspired Liquid Transport Devices by Array Change
AFSM-POS2
Shingo Ito
Unidirectional Liquid Transport on Anisotropic Surface Structure
Inspired with Hair Cuticle
AFSM-POS3
Nozomi Ito
Evaluation of anisotropic dynamic wettability of a hair cuticle structure
AFSM-POS4
Takao Sasagawa
Observation of Large Magnetoresistance in Single Crystals of Transition
Metal Pnictides MCu2P2 (M = Zr, Hf)
AFSM-POS5
Tsubasa Kashima
Evaluation of Spread Wetting on Biomimetic Microstructured Surfaces
AFSM-POS6
Takao Sasagawa
Exploration of Topological Superconductor Candidates in Pd-Compounds
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
AFSM-POS7
Nanami Sawayama
High Durability Plasma-Polymerized Thin Film for Corrosion Protection
of Metals
PBSM-POS1
Dwi Wahini Nurhajati
Biodegradability of Cassava Starch/High Density Polyethylene Reactive
Blend During Compost Burial
NST-POS1
Viruntachar Kruefu
Highly Sensitive and Selective Detection of Hydrogen Sulfide Gas Using
CuO/SnO2 Films
NST-POS3
Pimpan Leangtanom
Enhanced Ethylene Sensing Performance of CeOx-SnO2 Sensor for Fruit
Ripening Application
MPC-POS1
Pimpilai Wannasut
Investigation thermoelectric properties of segmented YBa2Cu3O7-x-
Ca3Co4O9 oxide ceramic synthesized by hot pressing methods
MPC-POS2
Keisuke Asano
Mechanical Characterization of Constant Current Electroplated Au-Cu
Alloy Micro-Cantilever
MPC-POS3
Maria Veronica Purwani
Separation of Cerium From Neodymium Hydroxide Concentrate Through
Calcination and Leaching Using HNO3
MPC-POS4
Yang Haneul
Fabrication and Gas sensing property of Cobalt oxide and Cobalt oxide-
carbon nanotube composite
MPC-POS5
Yustinus Purwamargapratala
Lithium Ion Battery Li4Ti5O12 Anode With Sol-Gel Method
MPC-POS6
Wagiyo Honggowiranto
Improving Performace of LiFePO4 With Addition of Carbon Nano Tube
For Lithium Ion Battery
NSTA-POS1
Teguh Yulius Surya Panca Putra
Operando Neutron Diffraction Experiments For Studies on The
Deterioration Mechanism of Li-Ion Batteries
OTHER-
POS1
Masatyuki Murase
Crystal Growth and Superconducting Properties of Layered Compounds
with a Bi Square-net
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
OTHER-
POS2
Arie Listyarini
Colorimetric Detection of Ammonia with A paper-based Label Using
Extract of Purple Roselle Flower
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
ICA_IUMRS 2018 The International Conference in Asia - International Union of Materials Research Society
Please arrive at session a few minutes before starting time Program is subject to change
Top Related