8/2/2019 Hydro Datas
1/51
A
PRATICAL TRAINING REPORT
ON
HYDRO TURBINES
AT
ANDRITZ HYDRO LTD.
(DURATION-18 JUNE TO 18 JULY)Submitted in partial fulfillment of Bachelor of Technology of Rajasthan
Technical University, KOTA
(2011-2012)
Submitted To:
Submitted By :Mr. D.N. NARESH ABHISHEK TANWAR
(HEAD) B.TECH MECH ENGG.
HEAD OF DEPARTMENT 4TH YEAR [VII SEM.]
ME08002
DEPARTMENT OF MECHANICAL ENGINEERING
JAIPUR ENGINEERING COLLEGE
KUKAS, JAIPUR (RAJ.)ACKNOWLEDGEMENT
To express my opinion in words is extremely difficult, though the present project
apparently speaks out names .The real credit goes to the organization which gave
1
8/2/2019 Hydro Datas
2/51
me this lifetime opportunity to work & learn in this much systematic and
professional environment. Now I would like to thankMr. D. N. NARESH(HOD)who provided me constant guidance, inspiration and help whenever and however
required. Last but not the least I would like to thank those numerous employees of
the company specially Mr. Kuldeep Kumar (D. Manager)whose clarity of
concepts and ability to solve problems is proverbial. Their unflinchingencouragement shall ever remain as a treasure in my memory.
ABHISHEK TANWAR
PREFACE
Engineer student gain their theoretical knowledge only through their books. Only
theoretical knowledge is not sufficient for absolute mastery in any field.theoritical given in
2
8/2/2019 Hydro Datas
3/51
our books is not much use without knowing its practical implementation, it has been
experienced that theoretical knowledge is volatile in nature, however practical knowledgemake solid foundation of our mind.
To accomplish this aspect, RTU, KOTA has included a SUMMER TRAINING
programme for the student of B.Tech. in summer vacation.
I took training in ANDRITZ HYDRO at Faridabad from 18 June to 18 July 2011.Successding chapter give detail about what I have learned in this prestigious organization.
ABHIHEK TANWAR
CONTENTS
Chapter Name Page1 Company Profile 5
2 History 7
3
8/2/2019 Hydro Datas
4/51
3 Introduction to hydro 10
Turbines
4 Machine shop 16
5 Fabrication shop 24
6 Assembly shop 30
7 Grinding Shop 33
8 Maintenance 35
9 Quality control 36
10 Stores 37
11 Planning 43
12 Machines & components 44
13 Conclusion 50
CHAPTER-1
Company Profile
4
8/2/2019 Hydro Datas
5/51
Global Activities
The ANDRITZ GROUP is a global market leader for customized plant, systems andservices for hydropower, the pulp and paper, steel and other specialized industries
(solid/liquid separation, feed and biofuel).
The Group is headquartered in Graz, Austria and has a staff of approx. 16,100 employees
worldwide. It develops and makes its high-tech systems at production, service and sales
sites all around the world.
Five business areas
The Group focuses on five business areas:
HYDRO
PULP & PAPER
METALS
ENVIRONMENT & PROCESS
FEED & BIOFUEL
The ANDRITZ HYDRO business area is a global supplier of turnkey electromechanical
equipment and services for hydro power plants; the product range also covers pumps for
the pulp and paper industries, and space technology components (e.g. for the EuropeanARIANE rocket launcher program).
PULP & PAPERprovides technology and services that enable the industry to produce
practically all grades of pulp for the manufacture of paper, board and fibreboard, and alsospecialized machines for tissue production.
ANDRITZ METALS develops, manufactures and installs plants for the production of
cold-rolled and hot-rolled, surface-finished carbon steel, high-grade steel and non-ferrousmetal strip. This includes plants for the regeneration of pickling acids and for metal
oxides. In addition, the Business Area builds plants for punching and metal forming.
ENVIRONMENT & PROCESS covers a comprehensive range of technologies,
products and services for mechanical and thermal solid/liquid separation for
5
http://www.andritz.com/ANONID09D8521827FB539F/hydro.htm#tophttp://www.andritz.com/ANONID09D8521827FB539F/ppp.htmhttp://www.andritz.com/ANONID09D8521827FB539F/metals.htmhttp://www.andritz.com/ANONID09D8521827FB539F/ep.htm#tophttp://www.andritz.com/ANONID09D8521827FB539F/ft.htm#tophttp://www.andritz.com/ANONID09D8521827FB539F/ppp.htmhttp://www.andritz.com/ANONID09D8521827FB539F/metals.htmhttp://www.andritz.com/ANONID09D8521827FB539F/ep.htm#tophttp://www.andritz.com/ANONID09D8521827FB539F/ft.htm#tophttp://www.andritz.com/ANONID09D8521827FB539F/hydro.htm#top8/2/2019 Hydro Datas
6/51
municipalities and major industries (mining, steel).
The FEED & BIOFUEL business area supplies systems and machines for industrial
production of conventional mixed animal feed and high-quality, special animal feed. Inaddition, the Business Area holds a leading position in equipment for wood pelleting.
CHAPTER-2
History
6
8/2/2019 Hydro Datas
7/51
ANDRITZ: From small iron foundry
to globally leading machinery and plant engineering company
Milestones in the history of ANDRITZ:
1852-1900Beginnings as an iron foundry
ANDRITZ AG has its origins in an iron foundry that was established in
1852 by the Hungarian entrepreneurJosef Krsi in Andritz, a suburb of
the city of Graz. Soon after its foundation, the companys production
program was extended to include large capital goods, such as cranes,pumps, water turbines, and later also bridges, steam boilers and engines, as
well as mining equipment.
In 1900, ANDRITZ became a stock corporation.
1900-1946World Wars and the Great Depression
At the end of the First and Second World Wars and during the Great
Depression in the early 1930s, ANDRITZs production came to a standstill,
but committed management and employees succeeded each time in making a
new start.
1946-1980Growth and new products
In 1949, ANDRITZ began a lasting cooperation with the Escher Wyss
Group of Switzerland, initially in the water turbines sector. ANDRITZsproduct portfolio was revised: Production of steam engines and air
compressors ceased, and the focus was placed on water turbines, centrifugalpumps, cranes, and steel structures. In 1951, ANDRITZ embarked on
production ofcomplete paper machines in cooperation with Escher Wyss.
In 1950, Creditanstalt-Bankverein of Vienna acquired a majority interest in
ANDRITZ.
During the 1960s and 1970s, ANDRITZ continued to grow. The production
shops were extended, new machines purchased, and R&D activities
intensified. Electrochemical and metallurgical equipment was added to theproduction program.
1980s Crisis and recovery
The second global oil crisis and worldwide economic stagnation in the early
1980s caused a drop in ANDRITZs order intake and the company was
operating at a loss, but Austrian government subsidies and drastic
7
8/2/2019 Hydro Datas
8/51
rationalization measures enabled the company to survive.
In 1987,AGIV AG, a Frankfurt-based investment company, purchased the
ANDRITZ share majority. ANDRITZ began to change its strategicdirection, from being a licensee of other equipment manufacturers to
become a leading international supplier of its own high-tech productionsystems.
Since 1990 Growth through acquisitions
In 1990, the acquisition of Sprout-Bauer, a US company supplyingequipment for mechanical pulp and animal feed production, marked the
beginning of the ANDRITZ GROUPs successful expansion policythrough acquisitions. Complementary acquisitions, in addition to researchand development, have been an important driver of company growth ever
since.
Since 1990, ANDRITZ has acquired and integrated more than 60
companies, pursuing its policy of complementary acquisitions. The largest
transactions in terms of sales were the acquisition of Ahlstrom Machinery
Group in 2000/2001 (making ANDRITZ a globally leading supplier of pulpproduction systems) and VA TECH HYDROs hydropower section in 2006
(advancing ANDRITZ to a globally leading supplier of hydropower plants).
1999 Change of ownership
AGIV AG sold its shareholding in ANDRITZ to a consortium of investment
companies (The Carlyle Group, GE Capital, Unternehmensinvest AG,
Deutsche Beteiligungs AG) and the Custos private foundation (establishedby ANDRITZ President and CEO, Wolfgang Leitner).
2001/2003 Going public
In 2001, ANDRITZ went public on the Vienna Stock Exchange. Two
million newly issued shares were placed successfully with national andinternational investors.
2003 saw the Secondary Placing of ANDRITZ shares on the Vienna stockexchange. The financial investors sold the entirety of their shareholding in
ANDRITZ, which resulted in a rise in free float to over 70%.
TODAYANDRITZ today
The ANDRITZ GROUP is a globally leading supplier of plants andservices for the hydropower, pulp and paper, metals, and other specializedindustries (solid/liquid separation, feed and biofuel). The Group is
headquartered in Graz, Austria, and operates over 120 production sites,
service and sales companies all around the world.
8
8/2/2019 Hydro Datas
9/51
CHAPTER-3
HYDRO TURBINES
What are hydro turbines?
9
8/2/2019 Hydro Datas
10/51
ANS: A hydro turbine uses the potential and kinetic energy of water and converts itinto usable mechanical energy. The fluid energy is available in the natural or artificial high
level water reservoirs, which are created by constructing dam at appropriate places in the
flow path of rivers. When water from the reservoir is taken to the turbine, transfer of
energy takes place in the blade passages of the unit .the mechanical energy made available
at the turbine shaft is used to run an electric generator, which is directly couple to theturbine shaft. The power generated by utilizing the potential and kinetic energy of water
has the advantages of high efficiency, operational flexibility, low wear and tear, and easeof maintenance.
Classification of turbine
Turbines are of two types:
A. Impulse Turbine: Wherein the available hydraulic energy is first converted
into kinetic energy by means of an efficient nozzle. The high velocity jetissuing from the nozzle then strikes a series of suitably shaped buckets fixed
around the rim of a wheel .The buckets change direction of jet without
changing its pressure .The resulting change in momentum sets bucket and
wheel into rotary motion and energy. An impulse turbine operator underatmospheric pressure, there is no change of static pressure across turbine
runner and the unit is often referred to as free jet turbine. Important impulse
turbines are: pelton wheel, turgo-impulse wheel, girad turbine, bunkiturbine and jonval turbine etc.
B. Reaction Turbine: Wherein the part of the total available hydraulic energyis transformed into kinetic energy before the water is taken to the turbine
runner. A substantial part remains in the form pressure energy.Subsequently both the velocity and pressure change simultaneously as water
bleeds along the turbine runner. The flow from inlet to outlet of the turbine
is under pressure and, therefore, blades of reaction turbine are closed
passages sealed from atmospheric conditions. Important reaction turbinesare: Fourneyron, Thompson, Francis, Kaplan and propellor turbines.
Hydraulic turbines further classified into various kinds according to:
Direction of water flow through runner:
Turbine
1.
Tangential flow Axial or parallel flow Mixed: radial and axial
(Pelton wheel) (Kapaln turbine) (Modern Francis turbine)
10
8/2/2019 Hydro Datas
11/51
Flow path in different types of runner has been illustrated in following figure.
BLADE
ROTOR
STATOR
(a)AXIAL FLOW(b)RADIAL FLOW (c)MIXEDFLOW
Pelton wheel is the tangential flow turbine; here the centerline of jet is
tangential to the path of rotation of the runner.
Propellor and Kaplan turbines are axial flow turbines; here water entersand leaves the runner along a direction parallel to the axis of the shaft.
Mixed flow turbines where water enters the runner at the outer periphery in
the radial direction and leaves it at the center in the direction parallel to the
axis of rotation of the runner. Modern Francis turbine is a mixed flowmachine.
Available head and discharge
High head turbines, which operate under high head (above 250 m) and
require relatively small rates or flow. Pelton wheel is a high head turbine.
Medium head turbines, which operates under medium heads (60 m to 250m) and require medium flow rates. Modern Francis turbine belongs to this
category.
Low head turbines, which operate under heads, up to 30m and require very
large volumetric rates of flow. Units of axial flow turbine (Propellor and
Kaplan) are examples of low head turbines.
On the basis of speed
For Pelton wheel: Ns = 9-17 for a slow runner=17-25 for a normal runner
=25-30 for fast runner
=40 for a double jet
Francis turbine: Ns = 50-100 for a slow runner
=100-500 for a normal runner=150-200 for a fast runner
11
8/2/2019 Hydro Datas
12/51
Kaplan turbine: Ns =250-850
Disposition of shaft
Impulse turbines have usually a horizontal shaft and vertical runner arrangement.Reaction turbine may be either of vertical or horizontal shaft type.
Main assemblies and operation of Pelton turbines
ASSEMBLIES
Assemblies mainly classified into three categories:-
a) Static1) Turbine housing
2) Disposition
3) Distribution Pipe4) Inlet Pipe
b) Dynamic1) Nozzle Assembly
2) Deflection Assembly
3) Runner Assembly4) Distributor Assembly
5) Oil Head
6) Cooling Water
c) Governing
1) Governor
2) Skada
Working Of Pelton turbine
Penstock is a large size conduit, which conveys water from the high level
reservoir to the turbine. Depending upon head it is made up of mild steel, concrete, or
wood .It is provided with control valves like butterfly valve, also screens and trashrack areprovided at the inlet of the penstock prevent entries of debris. At its downstream end,
penstock fitted with an efficient nozzle that converts the whole of hydraulic energy into a
high-speed jet. To regulate water flow a spear is provide which moves backward orforward thereby controlling flow area either by governing mechanism or by hand wheel.
The turbine rotor, called the runner is acicular disk carrying a number ofcup shaped buckets, which are arranged equidistantly around the periphery of the disk. In
case of mini hydro turbine the buckets are the integral part of the runner while in case ofthe large hydro turbine or large runner size the buckets are bolt mounted to the runners
disc. The runner is generally mounted on a horizontal shaft support in a small thrust
bearing and is casted integrally; they are made up of stainless steel. The inner surface of hebuckets is polished to reduce frictional resistance to the water jet. Each bucket has a ridge
or splitter, which distributes the striking jet equally into two halves of the hemispherical
12
8/2/2019 Hydro Datas
13/51
bucket. Again there is a cut (notch) in the outer rim of each bucket this make the jet face the
bucket only when they are at 90to each other. The angular deflection of jet in the bucket is
limited to about 165-170 degree. The arrangement has advantage that bearings supporting
the wheel shaft are not subjected to any axial or end thrust.A casing is provided around the runner to prevent splashing of water and to
guide the water to the tail race. It has no hydraulic function to perform apart it act as asafeguard against accidents.Speed of turbine runner is maintained so that generator coupled directly to the
turbine shaft runs at constant speed under varying load conditions. Governing mechanism
by regulating water supply does this above function.
With increase in load, the runner speed falls and consequently balls of thecentrifugal governor move inwards. Through suitable linkages, the resulting downward
movement of the governor sleeve is transmitted to a relay, which admits oil under pressure
to servomotor .The oil exerts a force on the piston of the servomotor, and that pushes thespear to a position, which increases the annular area of the nozzle. Quantum of water
striking the buckets is then increased and the normal turbine speed is restored. Conversely
happen when we have to reduce the load.
Main assemblies and operation of Francis turbines
ASSEMBLIES
Assemblies mainly classified into three categories:-
a) Static1) Turbine housing
2) Disposition
3) Stay Ring
4) Spiral
b) DynamicDistribution
Runner
Oil Seal
Shaft Seal Cooling water
Guide Bearing
c) Governing
1) Governor2) Skada
Working Of Francis turbine
Penstock is a large size conduit, which conveys water from the high levelreservoir to the turbine. Depending upon head it is made up of mild steel, concrete, or
wood .It is provided with control valves like butterfly valve, also screens and trashrack are
13
8/2/2019 Hydro Datas
14/51
provided at the inlet of the penstock prevent entries of debris. At its downstream end,penstock fitted with an efficient nozzle that converts the whole of hydraulic energy into a
high-speed jet. To regulate water flow a spear is provide which moves backward or
forward thereby controlling flow area either by governing mechanism or by hand wheel.
Penstock is connected to and feeds water directly into the spiral casing. Casing
constitutes a closed passage whose cross section area gradually decreases along the flowdirection area are maximum at inlet and very less at exit. The casing is made up of mild
steel or concrete. Stay vanes are usually provided to direct the water from the casing toguide vanes.
Guide vanes or wicket gates are series of airfoil shaped vanes, which are arranged
inside casing to form a number of flow passages between the casing and the runner blades.They guide the water onto the runner as per design. They swing around their own axes that
change the flow area between two consecutive runner blades. The motion is given by means
of governor.
The system consists of a centrifugal governing mechanism, linkages servomotor withits oil pressure governor and the guide wheel. The water flow and its direction remain
same at all the passages between any two consecutive guide vanes.
Runner of the Francis turbine is a rotor and has passages formed between crownand shroud in one direction and two consecutives blades on the other. There is about 16 to
24 number of blades in runner. These passages take water in at the outer periphery it in a
direction parallel to the axis of rotor. The driving force is both due to the impulse andreaction force. The runner blades are usually is made up of stainless steel. The runner is
keyed to the shaft, which may be of vertical or horizontal disposition.
After passing through the runner, the water is discharged to the tail racethrough a gradually expanding tube called the draft tube .the free end of the tube is
submerged deep into the tail race.
Main assemblies and operation of Kaplan turbines
ASSEMBLIES
Assemblies mainly classified into three categories:-
d) Static1) Turbine housing
2) Disposition
3) Stay Ring4) Spiral
e) Dynamic
DistributionRunner
Oil Seal
Shaft SealCooling water
Guide Bearing
14
8/2/2019 Hydro Datas
15/51
f) Governing
1) Governor
2) Skada
Working Of Kaplan turbine
Except the runner, all other parts such as spiral casing, stay ring
and stay vanes, guide mechanism and the draft tube are similar to those of Francis turbine.
Between the guide vanes and the runner water turns through right angle and subsequently
flows parallel to the shaft. The runner is in the form of boss, on the periphery of the bossare mounted equidistantly 3 to 6 vanes made of stainless steel. Hence it has less friction
resistance as runner blades are directly attached to the runner hub and also there are
fewer blades as compared to Francis turbines.The Kaplan has a double regulation, which comprises the movement of guide
vanes and runner vanes. The runner employs two servomotors; one control the guide vanes
and the second operates on the runner vanes .the governing is done by the governor frominside of the hollow shaft of turbine runner and the movement of piston is employed to the
twist blades through suitable linkages.
CHAPTER-4
MACHINE SHOP
Vertical Turret Lathe-1
Machine Maker FroriepMachine No. VTL 1
Job Undergoing Discharge ring lower part
Project Undergoing Karcham WangtooOperation Undergoing Boring
Tool Used Boring Tool or an Insert tool
15
8/2/2019 Hydro Datas
16/51
Maximum Diameter 7100 mm
Maximum Height 4200 mm
Digital Control PanelNo. Of RAM 3
Speed: 0.5 56 RPM
Feed: 0.05- 10 mm per minute
Vertical Turret Lathe-2
Machine Maker Dorries
Machine No. VTL 2Job Undergoing Runner Hub
Project Undergoing SomanamardiOperation Undergoing Boring
Tool Used DJNL (name of an single point insert)
Maximum Diameter of Job 1600 mm
Maximum Height 1000 mmNo. Of RAM 2
No. Of Turret or Tool Index 5
Speed: 180 RPMFeed: 0.044 4 mm per minute
Digital Control Panel
Vertical Turret lathe-3
Machine Maker FroriepMachine Number VTL-3
Max. Diameter 1200mmMax. Height 500mm
Job undergoing Servomotor cover
16
8/2/2019 Hydro Datas
17/51
Project - BabehalliTool Used DNMG (name of an insert)
Operation Undergoing: TurningNo. of Tool RAM 2
Tool Index / Turret 5
Max. Speed 180 RPMFeed 0.07 to 5 mm per min
Digital Control Panel
In vertical turret lathe while working tool remain fixed and job rotates. Various operations
carried on VTL are facing, turning, boring, grooving etc. Feed is automatic. Scrapproduced are spring like ribbon chips. RPM should always be low while working on
profile. For good finishing the RPM should be high and feed should be low. But final cut is
always small to maintain the desired accuracy and surface finish.
Job is set on table. Dial indicator is used to see whether it is uniformly attached to themachine always checks its position.
Errors in VTL
1. Misinterpretation of drawing and getting machined wrong dimensions.
2. Measuring instrument errors.
3. Sometimes machining of hot job causes shrinkage when the job cools.4. When doing vertical boring more than 100 mm sometimes taper occur at
the bottom.
Remedy
1. When shrinkage occurs extra material is welded to it and later on machining
is again done.
2. Also job is examined by the design and planning department whether thepresent dimension will work or not.
Precaution
Read the drawing carefully.
Check the accuracy of tool and calculate the error if there is any.
Use proper coolant like cutting oil.4. For avoiding taper at the bottom during vertical boring,
slide should be straight.
Radial Drilling Machine (RM 65)
Machine Maker - HMT
Working Range:
a. Drilling Radius: 550 2350 mmb. Sleeve Diameter: 400 mm
c. Distance Sleeve to Spindle: 350 2150 mm
17
8/2/2019 Hydro Datas
18/51
d. Spindle Traverse Distance, Base to Spindle: 380- 1645 mme. Working Surface Of Base: Length 2330 mm
Width 1000 mm
f. Standard Box Table (L*B*H): 600*500*500 mm
g. Maximum Feed: 1.25 mm per min
h. Minimum Feed: 0.125 mm per mini. Range Of Speeds:
Standard: 40 1800 RPMOptional: 50 2240 RPM
j. Machine Weight 4560 kg
Project Undergoing Somanamardi
Operation Undergoing Reaming
Job Undergoing Sealing SupportTool Used Taper Shunk socket Reamer
Drilling Machine
Machine Maker CsepelMachine No. 06 RD 1
Maximum Height: 10 11 feet
Job Undergoing Rotating Sump BottomProject Undergoing Somanamardi
Tool Used Drill Tool (Maximum 100 mm)
Operation Drilling
Speed 1800 RPMFeed range: 0.3 2 mm per min
Job is fixed and tool moves and rotates. It is used for drilling,
reaming and tapping, spot facing etc. Tools are adjusted and fixed by clamp. The
waste material produced is continuous long helical spring. Tool used are twist drill,
extra long drill, core drill, taper shrunk socket reamer etc. It has both automaticand manual feed.
Error in drilling machine
1. Misinterpretation of drawing and getting machined wrong
dimensions.2. Measuring instrument errors.
3. If tapping tool breaks then it get stuck inside the hole.4. Improper clamping of job causing slip of job.
5. RPM improper arrangement.
6. Shrinkage in Stainless steel7. Tool Setting
18
8/2/2019 Hydro Datas
19/51
Precautions
1. Metal plate should be used to prevent bending of
both tool and work piece.
Coolant should be used.Waste material should be removed bye brush.
Measuring instrument should be checked for error.Drawing should be studied properly.
Remedy is similar to that of VTL
Horizontal Boring Machine (Large)
Machine Maker SkodaMachine No. 14 HB-1
Job Undergoing Head Cover
Project Undergoing Karcham WangtooProcess Boring
Tool Used Boring Tool
Maximum Height 3800 mmMaximum Length 10,740 mm
Spindle Taper ISO 60
Table Length 3500 mm * 3500 mm
Maximum RPM 600Feed two types: 1/1 and 1/10
Maximum and minimum feed: 6.32 1250 mm per minute
X Direction Reciprocating Motion.
Y Direction Upward and Downward Motion.Z Direction Inward and Outward Motion.
Horizontal Boring Machine (Small)
Machine Maker Pama
Machine No. AL 127(15 HB 2)Job Undergoing Runner Blade
Operation Undergoing Facing
Project Undergoing Karcham WangtooTool Used Cutter
Speed Range: 8 950 RPMMaximum Feed 3 mm per revolution
Minimum Feed 0.025 mm per revolutionMaximum Length 1500 mm * 1500 mm
Maximum Height 1000mm
Job is fixed and tool rotates. For cutting purpose tool moves in clockwise
direction and for boring in any direction. It can move in X, Y, Z directions. For hard
19
8/2/2019 Hydro Datas
20/51
material the speed of spindle is kept low i.e. in first gear. For soft material we use highspindle speed i.e. fourth gear. It is used for making slots, t- slots, boring, and turning,
facing and drilling etc. Tool used areboring tool, radius slot cutter, facing cutter, turning
tool and all drilling tool etc. Sometimes a special drilling tool is also used depending upon
the job. This tool automatically uses coolant and has drill diameter of 120mm and 150 mm.
It has a digital read out (DRO). For holding job we have v block, clamp, strut and nut bolt.Waste materials produced are spiral shaped chips.
RPM is decided on following factor1. Type of material i.e. hard or soft
2. Diameter of the job
3. Tool used
Error in drilling machine
1. Over size of bore, drill and length i.e. crossing the tolerance provided in thedrawing.
2. Shrinkage, which generally occurs when job gets heat up and after cooling
it contracts.
Precautions
Coolant should be used.
Measuring instruments should be checked for errors.While working with long drill lubricating oil or cutting oil must be used.
Remedy is similar to that of VTL.
Computerized Numerically Controlled Lathe Machine
Machine Maker Ravens burg
Machine No. 01 L1
Job Undergoing Dummy Discharge RingProject Undergoing Somanamardi
Tool Used Turning Tool i.e. an insert PDJNL
Operation Undergoing Ding turning proof machiningChuck: Swing over bed 2000 mm.
Bed Length 6000 mm
Maximum Speed 125 RPMFeed range: 0.037 3.15 RPM
Here is job is set in the chuck. Here alignment of the job with respect to chuck is
checked with the help of dial indicator fitted with stand.
Errors are similar to above said machine.
Precautions and remedy are also similar.
20
8/2/2019 Hydro Datas
21/51
The selection of tool depends upon following criteria.
1. Operation to be performed.
2. Size of the job e.g. how large is the diameter of the hole to be made.
3. Vibrations in the job.
4. Finishing required.5. Thickness of the job.
6. Type of material.
Similarly the feed depends upon
1. Proof cut or finish cut.
2. Type of material.
LIGHT MACHINE SHOP
Lathe Machine
Machine Maker- HMTMachine no. NH-26 (No. 6)
Bed Length 6 feet/ 3000 mm
Gap Bed 290 mm
Holding Capacity of Chuck 480 mm diameterSwing Over Centroid 300 mm diameter
RPM: 40 240Project Undergoing Baglihar
Job Undergoing Centering Bushing
Operation Boring
Tool Used CNMP 4000 (an insert)Coolant Used Soluble Oil
Lathe Machine L2
Machine Maker HMTMachine no. NH-32
Bed Length 3000 mmHolding Capacity Of Chuck 480 mm diameter
RPM 40- 230
Swing over Bed 640 mmJob Undergoing - Guide Vanes
Project Undergoing Somanamardi
21
8/2/2019 Hydro Datas
22/51
Operation Run Out CheckTool Used TNMP (an insert)
Shaper Machine No. 1
Machine Maker Sagar
Machine no. - SH-1Stroke 26-inch/550 mmRPM 72
Job Undergoing Pointer
Project Undergoing Somanamardi
Operation TaperTool Used High Speed Steel cutting tool
Milling Machine
Mainly used to make boresMachine Maker HMTMachine no. - UM-1
RPM 35-1800
Coolant Used Cutting OilVertical Height 400 mm
Operation Undergoing Boring
Instructions Ensure proper clamping of the cutter, work piece and fixture beforestarting the machine.
Universal Tool & Cutter Grinder
Machine Maker HMT
Machine no. - TCG 1Length Of Magnetic chuck size 200 mm * 375 mm
Table can rotate at 45 Deg.
Tool Head 25 Deg. Both ways
The chuck can be attached to it to hold the job of bigger diameter.Universal vise is used for holding job.
Common lifting machines
Fork lifter
Capacity 3 tones
Make Godrej
Cylinder 4
22
8/2/2019 Hydro Datas
23/51
Fuel DieselFuel tank 40 liter
Automatic transmission i.e. only two gears reverse and forward. Jaws can
go up to a height of 3m. Power steering is also provided.
Cranes
Make WMI Cranes ltd. and Grip.
Capacity : 1- 40 tones.
There are 4 such cranes in the workshop. Mainly nylon sling and wire sling
are used to carry load with the help of attachments like S clamp, C clamp, Eye bolt, Swivel
Threads, manual hoist and D circle.Even this nylon sling and wire sling varies from 1 tone capacity to 40 tones
capacity.
CHAPTER -5
FABRICATION DEPARTMENT
Welding Equipments
TIG (Tungsten Inert Gas)
Machine Make: Frronius and Triodyn.
23
8/2/2019 Hydro Datas
24/51
It is a semiautomatic welding process. Here arc is struck
between electrode and job. Electrode is non-consumable. There is ceramic
coating over tungsten electrode tip. Ceramic coating is used because it has a
very high melting point of 3500C. Inert environment is provided by argon gas.
Hands supply filler metal manually.TIG has better penetration as comparison to otherwelding operations. It has no backfire. It is specially used for giving a coating
of stainless steel over a job when it is over machined or over grinded. Also
some times for balancing purpose metal are added through TIG. The filler
metal comes in various range of thickness from 1.2 mm, 1.6 mm, 2 mm and 2.4mm (Make is ESAB, kobelco and bohler). Copper cable is used to connect
Electrode holder and D.C. Flow meter are generally attached to the argon
cylinder.
MIG (Metal Inert Gas)
Machine Make: Frronius and Triodyn.
It is also semi automatic welding process. Here arc is also struck
between electrode and job. But here electrode is filler metal wire. Electrode isconsumable. Here filler metal wire speed is 5 mm per revolution. Argon and
carbon-di-oxide gases provide the inner environment. Color code for argon and
carbon-di-oxide cylinder is green. The Mild steel wire diameter ranges are 1.2 mm,2 mm, and 4 mm (Make is ESAB). Sometimes S.S coating is provided over M.S for
water resistant coating.
In MIG welding, spatter is prevented by applying spatter gel is applied
on the torch so that spatter doesnt stick to the torch. Spatter core is the area wherespatter can reach.
Welding fixture for M.S comes along with wire but for a S.S a separate fixture is
used.
SAW (Submerged Arc Welding)
Machine Make: Frronius and Triodyn.
It is an automatic welding process. Electrode is consumable. Herearc is struck between the electrode i.e. filler metal wire and the job. Filler metal wire act as
an electrode. Here shielding is done by flux. Flux is kept inside a cylinder at a pressure of6kg/cm^2. Flux come and covers the welded zone. Grain size of flux varies from 0.2 mm to1.6 mm. Its basicity index is 1.4. Before filling cylinder with flux, flux has to be heated at a
temperature of 300C for 2 hours .The make of flux is either ESAB or Ador. It is generally
used for heavy thickness.
SMAW (Shield Metal Arc Welding)
24
8/2/2019 Hydro Datas
25/51
Machine Make: Frronius and Triodyn.
It is used for welding pipe section like spiral. Butt joint can be weld up to thickness 15 20
mm. Here arc is struck between electrode and the job. Electrode can be of various types
depending upon job material and the thickness of the job. Always the positive terminal of
the dc source is connected to the electrode i.e. 1/3 to the electrode and 2/3 to the job. Thedistance between the job and the electrode depends upon thickness of the electrode at most
it could be 3 mm. Electrodes are generally heated in the electronic furnace at a
temperature about 100c to 120c before use so that it has no moisture and it gives you a
continuous weld. Hoses are made us of rubber. Reverse polarity is applied in SMAW.
According to American Standards, E 6013 means E stands for Electrode.60 stand for tensile strength. 1 stands for Welding Position. 3 stand for flux coating
or covering.
Welding job: Spiral Casing
Various electrodes used are: -
1. Electrode: 7018
Used for MS (Mild Steel). Heavy coated low hydrogen iron powder electrode for
high quality welds in restrained joints in MS. Radiographic Quality Weld. Metalrecovery minimum 110%. Ready electrode at 300 Deg. Celsius per hour.
Manufacturer: D & H
Use AC 70 or DC +
Diameter in mm Current (Amperes)
2.0 50 70
2.5 70 - 1003.15 100 - 150
4.0 150 - 1905.0 200 - 256
6.30 270 - 320
2. Electrode: 309L
Used for stainless steel. Electrode deposits a stainless steel weld metal of 25%Cr
12%Ni with extra low carbon. The weld deposit displays excellent resistance to
cracking even in restrained joints. The electrode is highly suitable for welding mildsteel to stainless steel.
The electrode possesses pleasing performance characteristics.
Manufacturer: D&H
Use AC or DC (+)
Diameter (mm) Current (ampere)
2 40-502.5 60-80
3.15 80-100
4 110-140
25
8/2/2019 Hydro Datas
26/51
5 150-180
3. Electrode: Bohler Fox (CN 13/4 Supra)
Maker Bohler Thyssen
Type C 0.03, Si 0.3, Mn 0.6, Cr 12.5, Mo 0.5, Ni 4.54. A basic coated alloyed core wire electrode design for both joint and
build up welding of similar stainless Cr steels and cast steels. Especiallysuited for water turbine, compressor and pumps. The
Maker: D&H
It yields a weld deposit of 25 % Cr, 12 % Ni austenitic deposit giveshigh resistance against cavitations.
Both AC and DC (+) can be applied to it.
Electrode: Cranitherne 25/12stainless steel suitable for welding. Its uses are asfollows:-
a) Welding stainless steel of similar composition.
b) Joining 18% Cr, 8% Ni from stainless steel to mild steel.c) Applying sheet linings of12% Cr steel to mild steel.
Both AC and DC (+) can be use
Diameter (mm) Current (ampere)2 40-50
2.5 60-80
3.15 80-1004 110-140
5 150-180
5. Electrode: Eutectic CPS 006
Maker: L&T
It is an all position electrode, design to yield low carbon weld metalwith superior corrosion resistance properties. Use for welding S.S.
Welding may produce fumes and gases, which are hazardous to health. Avoid breathing
this. Use adequate ventilations.
Safety Equipments used are
1) Welding curtain
2) Leather Hand gloves
3) Welding Respirator4) Leg Guard
5) Fire Retardant Cap
6) Welding glasses with side safety
7) Welding head screen8) Helmet
26
8/2/2019 Hydro Datas
27/51
NOTE: In other to prevent the bending while doing welding spiders are generally attachedto the large hollow job. These spiders are removed by gas cutting equipments.
Defects in Welding:
1. External
I. Blow Holes
II. Slag Trap
III. ImpurityIV. Surface Crack
V. Under Cuts
VI. Spatter
2. Internal
I. Blow HolesPin Holes
II. Porosity
III. Insufficient FusionIV. Internal Cracks
Types of Test
1. Dye Penetration Test:
In this test firstly the surface to be tested is cleaned by thinner & then
red penetrant is applied on it & then again it is cleaned. After this developer isapplied on it. After drying all surface impurities like crack are visible to eye & this
can be removed by the use of gauging. It is used for examining external cracks. The
developer stays there for about a minute so examiner had to note the entire surfacedefects very quickly.
2. Magnetic Penetration Test:
In this test magnetic powder is spread on the welded part & then
through magnetic jaws the magnetic field is applied & where the crack exist this powderstarts to jump-up or starts to attract towards the crack that depends on the development of
south-north pole i.e. on the polarity. It is used for examining the internal cracks.
3. Ultrasonic Test
In these test ultrasonic sound waves comes. The device used in UT test is
known as transducer or search unit .It contains piezoelectric material whichtransmits desired frequency of sound .For normal casting defects zero degree
angles is used & for bevel weld joint angled transducer is used like 60 degree, 45
degree. The defects are shown on the cathode ray oscilloscope. Before testing
27
8/2/2019 Hydro Datas
28/51
coupling should be applied. More the smoothness of the job more clearly thetransducer detects the defect & more clear the graph is plotted.
4. Radiography Test
In these test x-rays are made to fall on the job piece and deflections are
noted in the form of graph and by studying them we can find out internal defects. It is avery dangerous test as these rays are very harmful to human beings. So when these test are
carried nobody should be around a radius of 50 meter. These are a very accurate test ascompared to other test. For X-ray test cobalt-92 and Ra-162 are used.
After these if cracks are found there then these cracks are removed bygauging rod then grinding is done and after that it is again checked for cracks. For best
results in gauging following steps need to be followed:
1) Air pressure should be between 5 kg/ sq. cm and 8 kg/ sq. cm
2) The angle of rod should 45to the work piece.
3) Air jet should be switched on before striking of an arc.
4) Always use reverse polarity.Sometimes dousing is also done. It is done generally during heavy thickness and
internal crack. Carbon electrode and rectifier sets with heavy current do dousing.
After welding jobs are generally given a heat treatment in furnace. There are
two furnaces:a) Electric Furnace: 2800 mm * 2000 mm * 2000 mm, 440 volts.
b) Diesel Furnace: 9400 mm * 4400 mm * 2000 mm, With 6 burners.
IN S.R furnace first there is mild steel then there is a coating of brick, then glass wool orasbestos wool and lastly mild steel grill. In Stress relieving furnace gloves made of asbestos
are used.
Gas Cutting Equipments
Computerized Numerically Controlled Gas Cutting Machine
Machine maker: SatoTable length: 8400 mm * 3200 mm.
Oxygen/Acetylene & Oxygen/LPG is used for cutting. Mainly LPG is used because it
is cheap. Piercing pressure comes from Oxygen. Job is not heated to the melting point but
to the temperature where it can be plastically deformed. Gas cutting equipment uses airpressure to produce arc. Cutting pressure ranges from 9-kg/sq. cm to 16-kgf/sq.cm up to
thickness of 50 mm of Mild Steel. Nozzle cutting speed or piercing pressure depends on the
thickness of the plate. Working pressure for oxygen and acetylene is 9-10 kg/sq. cm. Thepressure in cylinder for oxygen and acetylene is 15-kg/sq. cm. While ratio between
oxygen/acetylene and is Oxygen/LPG 1:2.In CNC gas cutting machine first it checkwhether the required shape is possible or not. Nozzle, cutting speed, pressure, Pre-heatingtime, pre-heating pressure, piercing pressure and curf are all according to thickness of
plate. Line in and out also causes changes in piercing time for different shape.
Manual Gas cutting machine
In these machines there are two cylinders each of oxygen and acetylene or oxygen
and LPG connected two torches through hoses. The torch is made up of gunmetal.
28
8/2/2019 Hydro Datas
29/51
Generally single regulator is used for LPG, acetylene and oxygen. In winter seasonelectronic pre-heater is used when to temperature falls very low. It is fitted between
the regulator and the cylinder.
Plasma Cutting Machine
Machine maker: Hypertherm powermax (1100 watts)In these machines air pressure is used to produce arc and also used for cutting withpressure ranging from 9-kg/ sq. cm to 16-kg/ sq. cm up to thickness of 50 mm of
stainless steel. Here the arc produced is plasma arc .The electrode is made up of
brass.
Also carbon electrode can be attached to the SMAW for cutting purpose for
stainless steel for more than 50 mm thickness.
CHAPTER-6
ASSEMBLY SECTION
Project Undergoing Somanamardi
Job Undergoing Assembly Wicket Gate Assembly or Distributor Assembly
Dummy discharge ring is placed at the bottom and is known as bottomhead. On this ring we place the 24 guide vanes and on these guide vanes
we place bushes along with the top head. On this top head we placelevers whose one end is attached to the guide vane and other to the link.This link is attached to the regulating wheel. With the help of
servomotor we get reciprocating motion, which is of guide vanes.
In upper head there are 24 bores and in these bores 24 bushes areplaced. In these bushes similar number of guide vanes is also placed.
Inner head or inner distributor is fit into the center of wicket gate
assembly and through it the shaft is passed.
29
8/2/2019 Hydro Datas
30/51
Through guide bearing housing shaft is passed.
Guide Vanes It consists of two sides i.e. thick end and thin side. The
thick side is called flat side and the thin side is called chamfer side. The
water strikes at the thick side and passes away from the thin side. The
distance between the thick ends of the guide vein is called facial gap.
Ceiling Gap The distance between two corresponding faces of guidevanes. If ceiling gap is more than we have to file to make it less.
Filler gauge It is used to check the gap between two mating partsgiven as per drawing.
Axial play is done through dial indicator and dial stand.
After the fitting of head cover dew surface washers having the propertyof self-lubrication are placed on the upper surface of the guide veins.
Their main use is to reduce friction & provide lubrication. Without their
application the working of shaft will be affected.
After fitting of dew surface washers we place the track ring which
remain fixed on the guide vanes.
In Francis and Kaplan turbine regulating wheel is used to provideclockwise and anticlockwise rotation to guide vanes.
Tripping Relay Device It is a safety device used in turbines. It consists
of arrangement of lever, spring and cam. An electronic speed-measuringdevice is placed on the shaft to calculate its speed. As the speed of shaft
increases tension in the spring increases and it begin to move and a
stage comes when it outer face collides with the trip of tripping devicebecause of which the trip cuts off and the supply of oil to the shaft stops
which causes shaft to switch off. It is mainly due to the cut off of
servomotor. Maximum pressure in servomotor is 60kg/cm square&
maximum stroke of servomotor is 172.
Water attacks on the pressure side of the guide vanes and flow awayfrom the suction side.
Shot blasting is done before painting so that paints stick hard on thesurface. The pressure in shot blasting is 6-kg/sq. cm. In shot blasting
chips of either S.S or M.S are used of size varying from 0.2 mm to 0.5
mm diameter. Shot blasting is carried out in a closed room having 2 mmthick rubber walls. The operator operating shot blasting has to wear a
special dress, which covers all his body.
Firstly Red oxide (epoxy-71) is used for coating the surface. Afterwards
the epoxy paint coatings are done at the end of the job. These paints areof Epoxy 72 and are high quality abrasion resistant and water resistant.
Sometimes synthetic paint is also used over S.S just to give a good look
to the turbine and to hide the scratches.
Red oxide coating ensures good surface texture and smoothening. It also
avoids scratching to the job made by applying the blue and black color
directly to the job.
In hydro turbines black paint is used to coat that part of the job, which
is placed inside the water. Single red coating is applied at that place
30
8/2/2019 Hydro Datas
31/51
which comes in direct contact with oil. Yellow and blue are mainly usedfor outer surfaces, which come in contact with the air.
In spiral casing water is mainly given the view to flow and also a force
is exerting on it. The water enters the spiral casing gets divided by thehelp of internal fixed blades. This water then strikes the pressure side of
the guide vanes, which is thick and then goes to suction side, which isthin. After passing from the guide vanes water strikes the runner placedinside the spiral casing and then it starts to rotate the shaft. Due to this
rotation the hydro energy is converted into mechanical energy of the
rotation of shaft and this mechanical energy is converted into electrical
energy by use of generator.
There are two types of balancing static & dynamic. Static balancing is
mainly done in Pelton turbine. It is mainly done to check weight
irregularity. In the runner of Pelton turbine we always place weightduring static balancing for the balancing of job. But in case of Francis
weight removal is done from Francis runner.
Jobs accuracy is measured or checked by means of templates. Thetemplates drawings are sending by the designer to the assembly
department where the help of these drawings makes the required
templates of brass. For making this we use flat files, half round files,needle files, rounded files and tools.
In runner hub we use the inner bush of brass (non-ferrous) because if
the ferrous part is made in contact with the ferrous part for the rotation
purpose then both these SS parts produce friction between them andcause scratching of each other and our purpose of rotation is not
fulfilled. Therefore we use ferrous and non-ferrous combination to avoid
friction. Also in these brass bushes small slots are made for the purpose
of lubrication. Tungsten carbide is used for the coating of the turbine face because due
to high pressure water consisting of sand particles the turbine face isaffected very much and their exists some holes in it. Due to this reason
turbines life is reduced. To increase its life we use tungsten carbide.
SILT Tanks is used for cleaning purpose to prevent sand coming into the
turbine. Although trash racks are provided in the penstock but theycant stop sand. They can control only stop big wood blocks sought of
thing.
31
8/2/2019 Hydro Datas
32/51
CHAPTER-7
GRINDING SECTION
Different Types Of Grinders
Single-phase 50hz angle grinder
Three-phase 300hz angle grinder
Three-phase high frequency angle grinder can be used for longer time& does not get heat up as compare to single-phase grinder. It requires less
maintenance than other grinder.
Pneumatic air grinderMaker: Chicago.
Pressure in pneumatic air grinder is 6.2 bars. RPM in pneumatic air
grinder is 13000.
Sendor
It is also single-phase 50hz. Support pad is used in sender for supporting
amri disc. Generally two-amri disc are also used for support.
32
8/2/2019 Hydro Datas
33/51
Swing Grinder
It is used for rough grinding. It is very helpful in removing material in large scale.
BOSCH manufactures all die grinders stated above.
TOOLS USED
Grinding Wheel
Maker: NORTON
It is used for rough or proof machining or material removing. Its diameter
ranges from 7 inch, 9 inch and 125 mm. They all have different RPM.
Stone Wheel
Maker: NORTON
Stone wheel 50 mm in diameter. is used for removing carbon.
Flat wheel or Amri Wheel:
Maker: Split Fire
It is used for polishing and finishing e.g. Pelton wheel runner etc. Its diameterranges from 25 mm, 40 mm and 50 mm. Its grit size ranges from 36, 60, 80 and 120.
Mounting Wheel or Mounted Tip:
Maker: NORTON
Mounted tip is used in pneumatic air tool. It is used for finishing & polishing. It isof following two types: -
1) Conical T3: It is used for sharp edges and is conical in shape. It is made up
of tungsten.2) Round B4: It is used for round edges or making cylindrical radius. It is also
made up of tungsten.
Amri Disc:
Maker: Alkon GoldIt is used for surface finishing & mainly for light work. Grit size varies from 20,
36, 60, 80 and 80. Its compositions are diamond dust, zirconium and silicon carbide.General order for finishing in grit size is 20, 36, 60, and 80 and 120 depending upon the
surface finishes required.
Swing Grinder wheel
Make: Norton.
Its size is 300*40*38.1.
In grinding section manufacturing of runner, stay vanes, runner blades,
and guide vanes is done. Sometimes job comes for step merging also. Manual Grinding isdone to obtain special hydraulic contours. Grinding is done according to the requirementsmention in the drawing using various templates for various contours or profiles. Some
places need rough grinding and some need finish grinding depending upon the part. Safety
Equipments Used is goggles, earplug, and gloves. When mounting job in the fixture itshould be covered by tape so that no scratches occur.
Punching is done to have proper thickness and proper hydro dynamically
contour. It is done from both sides i.e. x and y direction. Grinding is done in Z direction.
33
8/2/2019 Hydro Datas
34/51
Tolerances for Pelton wheel are +0.5 or 0.5, for runner profile in Francisturbine is +1 or 1; for thickness of runner is +0.3 and 0.3 and for guide vanes and
runner blades is +0.5 to 0.5.
Moving trolley has trips the meter when earthing doesnt work then it get trip.
Templates are made through CNC wire cutting machine. These are made up off SS, MS,
spring steels and gunmetal.
34
8/2/2019 Hydro Datas
35/51
CHAPTER-8
MAINTENANCE DEPARTMENT
Maintenance is of two types:
1. Planned
I. Autonomous: 3M 3S (Japanese Method)3M 3S stands for 3 minute 3 services that mean daily to daily
checking of machine cleanliness, hydraulic pressure and oiling or
lubrication.
II. Preventive:
In these MTBF (mean time between failures) and MTTR (meantime to repair) should be same.
III. Predictive MaintenanceIt is like you can predict the time to failure. It requires control
over frequency of checking.
IV. Conditioning Maintenance:It is monitory very close before sometime of predictable failure
date i.e. 10 days before so that if it fails first we can replace it or if it works
for some more days then it prevents some money for organization. Different
tests carried on condition monitoring like vibration test and hydraulic checketc.
2. Unplanned
I. Breakdown Maintenance
II. Corrective Maintenance
Maintenance mainly involves infrastructure details along with the machineprofile and all computer related things.
Here in VA Tech total production management is followed. Maintenance department alsohandles computer network wiring and generators.For computer networking VA TECH use
Cat-7 technology in which 20,000 meters long wires are laid down. Proportional Logic
Controller Synchronization is used in generators which synchronies voltage, frequency andphase angle. Maintenance involves external power generation, internal power generation
in case of power cut off, synchronization thru PLC. Maintenance also assembled new
machinery.
35
8/2/2019 Hydro Datas
36/51
CHAPTER 9
QUALITY CONTROL
There are four stages of quality control:
1. Incoming Stage
2. Process
3. Final Machining
4. Assembly
a) Standard of quality is achieved in accordance to customer needs.
b) QAP stands for Quality Assurance Plan
c) Casting test is done at the foundry shop witnessed by VA TECH
Officials.d) NCR means Non Confirmation Report is made for the faulty
product.
e) Various test conducted under quality control are Hardness Test, Elongation Test, Tensile Strength Test, Dimensioning and heat
treatment.
f) In process test Penetration Test, Ultrasonic Test, Magnetic Test and
Accuracy Test, Radiography test is done.g) In final machining dimensioning and penetration test are conducted.
h) In assembly dimensioning test are conducted.
36
8/2/2019 Hydro Datas
37/51
CHAPTER-10
STORES DEPARTMENT
In two ways the material is given:
Consumables (electrodes, grinding wheel)
These tools once you give dont return back. Consumables are always enter the SAP.
Non-Consumables (instrument, tools)
These tools are return back to the customer after there use. Non- consumables are
manually maintained in the register.
How to maintain the stock levels?
1. Identify all major regular items with monthly average consumption.2. Fix the maximum, minimum and ordering level of these items in SAP.
3. Review the stock levels and raise MPR when stock reaches ordering level
(material purchase requisition).
4. Consider the current lead-time while raising MPR.5. Purchase MPR if the level is going down.
6. Review the consumption trend periodically.
7. Based on the consumption trend review the list of stock items and theirstock levels with the users and update the same.
MRV stands for material receive voucher.Store is divided into following sections:
Special Erection Tools
Used when machines are plotted or fixed.
Welding Equipments
Grinding Equipments
Safety Equipments
Heavy Sections
Hydraulic jacks are used to uplift the heavy loads. Using a cycle chain
like arrangement uses roller spadder to move heavy jobs from one place
to another. Its ranges from 1 tons to 20 tons.
Oil pump pumps the oil to the hydraulic machine. It has a dial showing
how much weight lifted.
37
8/2/2019 Hydro Datas
38/51
Special purpose drilling machine both magnetic and vaccum usedspecially for foundation purpose or packing purpose. It is a portable
machine.
Pipe bending hydraulic machine fitted with oil seal is used to bend pipe.
Pumping is done by hand. Oil seal doesnt allow it to flow back. It ha
various dies of different shape. Also pipe holder can hold pipes ofdifferent shape.
Electrical Instruments
BS-60 electric paint spray gun mainly used for painting, disinfecting,corrosion-removal & cleaning. It has .5 mm round spray nozzle.
Specifications:
Power supply: 230V, 50 HZPower: 60 Watts
Maximum pressure (app.): 140 bars
HILTI PD-10 mainly used to measure the distance during erection.
These include torches, Meqquer, Electronic Label maker, C.R.O,
and Switchboard. In these devices some are current measuring devices &some are used for the purpose of amplification
General Instruments
Center head (dead center) revolving whole.
Revolving head only tip port.
Drill chuck
General Tools
BOX SPANNER: They are used for tightening purposes. Handle,
which is fitted inside the box spanner & is working like lever & rotates to
produce tightening. (6 mm to 110 mm diameter)
Vice are used to hold the job. Letter punch, Number punch are
used to print numbers & letters on the job.
Hammer spanner (30 mm to 125 mm diameter)
Hammer ring spanner (50 mm, 55 mm, 125 mm)
Die spanner
38
8/2/2019 Hydro Datas
39/51
Allen key
Ring spanner
Lifting Tools
Manual hoist is lifting equipment.
CALIBRATED & MEASURING INSTRUMENTS
Electronic Surface finish tester is used to
measure the surface finish. It gives you RA um. A conversion sheet isprovided to convert finishing N6,N7etc to corresponding RA um
Vernier bevel protector is used to measure angles from 5-360.
Radius gauge is used to measure radius of a
section. You can measure both outside and inside radius. Its range is from1mm to 25 mm.
Combination set is used to find center of
round shape objects from o-180. It has two main parts center head and
45head.
Pistol caliper is used to measure thickness ofa job where micrometer cant reach. Its least count is 0 .1 mm. Its range is
from 0.1 to 100mm.
Depth micrometer is used to measure depth.
Its least count is 0.1 mm. Its range is from 0 to 300 mm.
Filler gauge use to find out facial gap .It has
a standard thickness plate. Its range is from 0.5 to 1mm.
Dial gauge indicator is used to measure run
outs, finding center and parallel also used to check whether job is alignedwith machine or not its least count is 0.01 mm. Its range is from 0.01mmto 10 mm.
Bore gauge is used to measure diameter of a
bore. Its least count is according to dial gauge. But generally is 0.01 mm.Its range is from 6 to 450. Its main parts are dial indicator, holder (grip),
39
8/2/2019 Hydro Datas
40/51
outer sleeve, measuring, contact point, guide, interchangeable rod, limitedhand, and bezel.
Bore gauge
Flange type micrometer is used to measure
small gap like parting area. Its least count is 0.01 mm. Its range is from 1to 25 mm.
Height gauge is used to find height of a job. It
has carbide, which can be use for marking. Its main parts are base,vernier scale, and scriber locking screw, adjusting screw. Its least count is
0.02 mm. Its range is from 0.1 mm to 600 mm. Its main part are base,reference surface of base, column, slider, main beam, main scale, vernier
scale, clamp screw, fine feed screw, scriber and magnifying glass.
Lever type dial gauge or Puppy dial is used
to find center of a bore or hole. Its main part are as follows:
a) Stylishb) Dovetail Spigot Assembly
c) Height Gauge
d) Adaptor Assemblye) Universal clamp Assembly
f) Spanner
g) Calibration
Slip gauge is small blocks which stick to each
other when they are rub against each other due to better surface finishhence they create a vacuum. It is use to measure Height .It is made up of
high carbon steel. Its range is from 0.5 mm to 100 mm.
40
8/2/2019 Hydro Datas
41/51
Inside micrometer is used to measure insidediameter. It has micrometer in which you can add rod of required length
to measure the diameter. Its range is from 50 mm to 5 m.
Outside micrometer used to measure the
outside diameter of the job in the range of 0 mm to 1100 mm. It has amasterpiece, which is used to check error. Each division is of 10 microns
or 0.01 mm. Spindle, frame, anvil, inner sleeve, outer sleeve, adjustmentnut, ratchet stop, ratchet screw, clamp, frame cover, carbide tip and
thimble are its important part.
Inside dial caliper is used to measure inside
diameter. It has least count of 0.025 mm. Its range is from 10 70 mm.
Ring gauge are of two types thread ringgauge (male threads) and thread plug gauge (female gauge). These are of
go and no go types. Thread ring gauge is used to measure the thread
41
8/2/2019 Hydro Datas
42/51
accuracy on nut while plug gauge is used to measure the accuracy ofthread in holes. Its range starts from M6.
Digital Vernier micrometer gives thereadings digitally .It is very accurate machine. It gives readings up to
microns. Its range is from 1 micron to 25 mm.
Digital height gauge is also a very accuratemeasuring instrument. It has a digital display. It gives readings up to
microns and can measure up to 600 mm.
Master level or spirit level is used to check
the level of machine during foundation.
Laser range meter is use to measure the
distances with the help of laser light. It has a very wide range and is very
accurate instrument.
Cutting tool
Twist drill is made up of HSS. Its range is from 3 mm to 80 mm.
Extra long twist drill is made up of HSS.
Core drill is made up of HSS.
Taper shank socket reamer made up of HSS. Its range is from 5 mm
to 60 mm.
Cutter is also made up of HSS.
Brazing tool is made of carbide tip.
Flat drill is also made up of HSS.
Taps are available from M1 to M 80.
Stationary
42
8/2/2019 Hydro Datas
43/51
CHAPTER-11
PLANNING
After release of drawing from design department it comes to planning department. It has
following three parts:
a) Action planningb) Technology
c) Subcontracting
d) Loading and scheduling
Basically it handles the manufacturing process in workshop and subcontracting. First
it prepares a job card, which has all the operation to be performed. Every time each
process is over the supervisor has to enter the time taken by each operation in SAP, sothat planning can monitor over the progress over job.
It has an important part called subcontracting which look after the jobs which have
to be machined from outside. Planning you can say is completely done and controlled
with the help of SAP (system application product). Various important functions ofplanning are:
a) Raising sub contracting purchase requisition
b) Preparation of purchase requisitionc) Handling proof machined items
d) Amending purchase requisition
e) Booking material and hoursf) Booking hours for PPC (production planning control).
g) Ordering and inspection of hardware
h) External processing of customer supplied goodsi) Control of plate material
j) Regularization of materials lying in project stockk) Closing subcontracting orders
l) Closing of projectsm) Closing of P.O
n) Making checklist for P.O
o) Preparation of MIS reportsp) Logging of man hours
43
8/2/2019 Hydro Datas
44/51
CHAPTER-12
Machines & Components
FRANCIS STAY RING
44
8/2/2019 Hydro Datas
45/51
SKODA HB-1
PANCHEEL HILL RUNNER ASSEMBLY
45
8/2/2019 Hydro Datas
46/51
FINAL GRINDING OF KAPLAN RUNNER
ASSEMBLY OF SPIRAL CASING
46
8/2/2019 Hydro Datas
47/51
FINAL GRINDING FRANCIS RUNNER
KAPLAN RUNNER
47
8/2/2019 Hydro Datas
48/51
HEAVY ROLLING MACHINE
PELTON TURBINE
48
8/2/2019 Hydro Datas
49/51
DRAFT TUBE
FRANCIS TURBINE
49
8/2/2019 Hydro Datas
50/51
LAYOUT OF KAPLAN TURBINE
CHAPTER-13
CONCLUSION
ANDRITZ HYDRO LTD is one of the global leading company in HYDRO
POWER PLANT, which manufacture , design & overhaul of a variety of
hydro products from small to large hydro projects.
Since its inception in 1852, the company has grown into a giant hrdro
complex spread worldwide, the advancement of new technology using
SCADA(supervisory control & data acquisition) for automation.The
divisions competence is based on more than 225,000 MW of installed hydro
capacity worldwide with turbine of all type.
Thus increasing the business on commercial lines in a climate of growing
professional competence.
And finally training has proved to be quite fruitful.
50
8/2/2019 Hydro Datas
51/51
Top Related