Hydraulic Power for all IndustrialApplications
®
®H
ydraulic Pow
er for all Industrial Applications
®
E321e
A UNIT OF APPLIED POWER
E321e
Introduction
The World of Enerpac ................................................... 4
Cylinders (Hydraulic) 6-51
Introduction ...................................................................... 6-7RC-Series, Single-Acting Cylinders ........... 8-11RC-Series, Cylinder Accessories ...................... 12RCA-Series,
Single-Acting Aluminium Cylinders ............ 13CLP-Series,
Single-Acting Pancake Cylinders ........ 14-15RSM-Series,
Single-Acting Flat-Jac Cylinders .......... 16-17RCS-Series, Single-Acting
Low Height Cylinders .................................... 16-17BRC-Series, Single-Acting
Pull Cylinders ...................................................... 18-19BRP-Series, Single-Acting
Pull Cylinders ...................................................... 18-19RCH-Series, Single-Acting
Hollow Plunger Cylinders .......................... 20-21RRH-Series, Double-Acting
Hollow Plunger Cylinders .......................... 22-23BRD-Series, Double-Acting
Precision Cylinders ......................................... 24-25RR-Series, Double-Acting Cylinders ...... 26-29CLS-Series, Single-Acting
High Tonnage Cylinders .............................. 30-33CLR-Series, Double-Acting
High Tonnage Cylinders .............................. 34-37CLL-Series, Single-Acting
Lock Nut Cylinders ......................................... 38-41Synchronous Lift System ................................ 42-43BLS-Series, Double-Acting
Stage Lift Cylinders ........................................ 44-45Strand Lift System ................................................ 46-47JHA and JTA-Series, Aluminium Jacks ........ 48JH-Series, Steel Jacks .............................................. 49SC-Series, Cylinder-Pump Sets ................. 50-51
Pumps (Hydraulic) 52-92
Introduction ................................................................ 52-53P-Series, Lightweight Hand Pumps ........ 54-55P-Series, Steel Hand Pumps ........................ 56-57P- and PL-Series, Low Pressure
High Flow Hand Pumps ............................... 58-59P- and 11-Series,
Ultra-High Pressure Hand Pumps ...... 60-61PB-Series, WalkPac
Battery Operated Pumps ........................... 62-63PU-Series, Economy Electric Pumps .... 64-65PU-Series, Titan Electric Pumps ............... 66-69PE-Series, Submerged Electric Pumps 70-73PE-Series, Hushh Electric Pumps............. 74-79PP-Series, Electric Pumps
(8000- and 9000-Series) .............................. 80-81PAH-Series, Air Hydraulic Pumps ............ 82-83PA-Series, Turbo Air Pumps ......................... 84-85PA and 10-Series,
Air Hydraulic Pumps ...................................... 86-87
PAM-2000-Series, Air Hydraulic Pumps ...................................... 88-89
PGM-Series, Atlas Gasoline Powered Pumps ........... 90-91
EGM-Series, Gasoline Pumps ............................. 92
Yellow Pages (Information Section) 93-104
Introduction and Standards ................................... 93Safety Instructions ................................................ 94-95Cylinder-Pump Matching and Selection ............................................ 96Hydraulic Work Sheet ................................................ 97Basic Hydraulic System Set-ups .............. 98-99Basic Hydraulics .............................................. 100-101Conversion Tables ..................................................... 102Cylinder Speed Charts ........................................... 103Valve Information ........................................................ 104
System Components 105-118
Introduction ..................................................................... 105High Pressure Hoses .................................... 106-107Hydraulic Couplers ......................................... 108-109Hydraulic Oil ................................................................... 110Manifolds .......................................................................... 110Fittings ................................................................................ 111GP and GF-Series,
Hydraulic Force Gauges ....................... 112-113G, SSG and H-Series,
Hydraulic Pressure Gauges ................ 114-115T-Series, Test System Gauges ......................... 116BDG-Series, Digital Hydraulic Gauges ...... 117Gauge Accessories ................................................... 118
Valves 119-125
Introduction ..................................................................... 1193-Way Directional Control Valves ........ 120-1214-Way Directional Control Valves ........ 122-123Pressure and Flow Control Valves ..... 124-125
Hydraulic Presses 126-139
Introduction .......................................................... 126-127B-Series, H-Frame Presses ..................... 128-131SOP-Series, Bench and
Workshop Presses ...................................... 132-133BPR-Series, Roll Frame Presses ......... 134-135C-Clamps and Arbor Presses ................ 136-137Press Accessories ..................................................... 138Load Cells and Tension Meters ....................... 139
Pullers, Manual and Hydraulic 140-155
Introduction ........................................................ 140-141MP-Series, Mechanical Pullers ........... 142-143BHP-Series, Hydraulic Puller Sets ... 144-147BMZ-Series,
Hydraulic Master Puller Sets ............ 148-149EP, EPP and EPX-Series,
Mechanical Posi-Lock Pullers ........ 150-153EPH-Series,
Hydraulic Posi-Lock Pullers ............. 154-155
Hydraulic Tools 156-178
Introduction ........................................................ 156-157ST-Series, Tool and Pump Sets .......... 158-159MS-Series, Maintenance Sets ............. 160-163SP-Series,
35 Ton Hydraulic Punch ...................... 164-165SP-Series,
50 Ton Hydraulic Punch ...................... 166-167A and WR-Series,
Wedgies and Spread Cylinders ................ 168SOH-Series, Hydraulic Machine Lifts ....... 169ER-Series,
Heavy Duty Load Skates .................... 170-171WHC-Series,
Self Contained Hydraulic Cutters ........... 172WMC-Series, Hydraulic Cutter Heads ..... 173NC-Series, Hydraulic Nut Splitters ............. 174FS-Series,
Hydraulic Flange Spreaders ......................... 175STB-Series, Pipe Benders ...................... 176-177CM-Series, Material Storage Cases .......... 178
Model Number Index 179
Table of Contents
2
®
Hydraulic Technology Worldwide
World Wide Catalog CoverageEnerpac Catalogs are printed in many languages. If yourrequirements call for product use in a different country, please send your request to the applicable country listedon the back cover of this catalog – the Enerpac catalogof the country serving your specific market area will be forwarded promptly.
For your Safety and BasicHydraulic Information, see ournew ‘Yellow Pages’.
All information in this catalog can be changed due to product improvements wit-hout prior notice.
© Copyright 1997, Applied Power Inc. All rights reserved. Any copying or other useof material in this catalog (text, illustrations,drawings, photo’s) without express writtenconsent is prohibited.
H
Page: 93
3
Model Number Index Section Index
®
H HPage(s) H Page(s) H Page(s) H Page(s) H
CylindersPage 6-51
PumpsPage 52-92
SystemComponents
Page 105-118
Valves Page 119-125
PressesPage 126-139
PullersPage 140-155
ToolsPage 156-178
AA . . . 12, 109, 110
136, 162, 168AD . . . . . . . . . . . . . 138AH . . . . . . . . . . . . . 109AM . . . . . . . . . . . . 110AR . . . . . . . . . . . . . 109AW . . . . . . . . . . . . . . 12
BB . . . . . . . . . . . . . . . 176BAD . . . . . . . . . . . . . 25BAP . . . . . . . . . . . 128BC . . . . . . . . . . . . . . . 62BD- . . . . . . . . . . . . 117BEH . . . . . . . . . . . 128BEP . . . . . . . . . . . 128BFZ . . . . . . . . . . . 111BHP . . . . . . . . . . . 144BLS . . . . . . . . . . . . . 44BMP . . . . . . . . . . 128BMZ . . . . . . . . . . 148BP . . . . . . . . . . . . . . . 62BPR . . . . . . . . . . . 134BRC . . . . . . . . . . . . 18BRD . . . . . . . . . . . . 24BRP . . . . . . . . . . . . . 18BV . . . . . . 120, 122
CC . . . . . . . . . . . . . . . 108CAT . . . . . . . 12, 17CD . . . . . . . . . . . . . 109CH . . . . . . . . . . . . . 109CLL . . . . . . . . . . . . . 38CLP . . . . . . . . . . . . . 14CLR . . . . . . . . . . . . . 34CLS . . . . . . . . . . . . . 30CM . . . . . . . . . . . . 178CR . . . . . . . . . . . . . 109
DDG . . . . . . . . . . . . . 117
EEAM . . . . . . . . . . . . 87EGM . . . . . . . . . . . . 92ELP . . . . . . . . . . . 170EMB . . . . . . . . . . 170EP. . . 150,153,155EPH . . . . . . . . . . . 154EPH- . . . . . . . . . 155
EPP . . . . . . . . . . . 153EPPMI . . . . . . . 150EPX . . . . . . . . . . . 153ER . . . . . . . . . . . . . 170ERH . . . . . . . . . . . 170ERS . . . . . . . . . . . 170ES . . . . . . . . . . . . . 170
FF . 105, 109, 175FH . . . . . . . . . . . . . 109FM . . . . . . . . . . . . . 118FR . . . . . . . . . . . . . 109FS . . . . . . . . . . . . . . 175FZ . . . . . . . . . . . . . . 111
GG . . . . . . . . . . . . . . . 114GA . . . . . . . . . . . . . 118GF . . . . . . . . . . . . . 112GP . . . . . . . . . . . . . 112
HH . . . . . . . . 106, 112
114HA . . . . . . . . . . . . . 106HB . . . . . . . . . . . . . 106HC . . . . . . . . . . . . . 106HF . . . . . . . . . . . . . 110HP . . . . . . . . . 21, 23
IIC . . . . . . . . . . . . . . 122IPK . . . . . . . . . . . . 138IPL . . . . . . . . . . . . . 138
JJBI . . . . . . . . . . . . . . 12JH . . . . . . . . . . . . . . . 49JHA . . . . . . . . . . . . . 48JHL . . . . . . . . . . . . . 49JTA . . . . . . . . . . . . . 48
LLH . . . . . . . . . . . . . 139
MMP . . . . . . . . . . . . . 142MPA . . . . . . . . . . 142MPL . . . . . . . . . . 142MPP . . . . . . . . . . 142MPR . . . . . . . . . . 142
MS2- . . . . . . . . . 160MSP . . . . . . . . . . 164MZ . . . . . . . . . . . . . 162
NNC . . . . . . . . . . . . . 174NV . . . . . . . . . . . . . 118
PP . . . . . . 54, 56, 60PA . . . . . . . . . . . . . . . 86PAH . . . . . . . . . . . . . 82P-AL . . . . . . . . . . . . 55PAM . . 84, 87,88PAN . . . . . . . . . . . . . 88PAT . . . . . . . . . . . . . 84PBM . . . . . . . . . . . . 62PBR . . . . . . . . . . . . . 62PC . . . . 54, 58, 78PD . . . . . . . . . . . . . 117PED . . . . . . . 70, 74PEJ . . . . . . . . . . . . . 70PEM . . . . . . . 70, 74PEN . . . . . . . . . . . . . 74PER . . . . . . . 70, 74PES . . . . . . . 70, 74PFC . . . . . . . . . . . . . 78PGM . . . . . . . . . . . . 90PK . . . . . . . . . . . . . 138PL . . . . . . . . . . . . . . . 58PMB . . . . . . . . . . 138PPH . . . . . . . . . . . . . 78PPK . . . . . . . . . . . . . 78PPN . . . . . . . . . . . . . 80PUD . . . . . . . 64, 66PUF . . . . . . . . . . . . . 66PUJ . . . . . . . 64, 66PUM . . . . . . . . . . . . 66PUR . . . . . . . . . . . . . 66
RRB . . . . . . . . . . . . . . . 12RC . . . . . . . . . . . . . . . . . 8RCA . . . . . . . . . . . . 13RCH . . . . . . . . . . . . 20RCS . . . . . . . . . . . . . 16REB . . . . . . . . . . . . . 12REP . . . . . . . . . . . . . 12RFL . . . . . . . . . . . . . 88RPC . . . . . . . . . . . . . 62RR . . . . . . . . . . . . . . . 26RRH . . . . . . . . . . . . 22
RSM . . . . . . . . . . . . 16
SSBD . . . . . . . . . . . 164SCH . . . . . . . . . . . . . 50SCL . . . . . . . . . . . . . 50SCP . . . . . . . . . . . . . 50SCR . . . . . . . . . . . . . 50SD . . . . . . 164, 166SDB . . . . . . . . . . . 166SL . . . . . . . . . . . . . . . . 42SOH . . . . . . . . . . 169SOP . . . . . . . . . . . 132SP . . . . . . 164, 166SPD . . . . . . . . . . . 164SSG . . . . . . . . . . . 114ST . . . . . . . . . . . . . . . 46STB . . . . 176, 177STC . . . . . . . . . . . 158STF . . . . . . . . . . . . 158STN . . . . . . . . . . . 158STP . . . . . . . . . . . 158
TT . . . . . . . . . . . . . . . . 116TM . . . . . . . . . . . . . 139
VV . . . . . . . . 118, 124VA . . . . . . . . . . . . . . . 87VC . . . . . . 120, 122VM . . . . . 120, 122
WWCB . . . 172, 173WFS . . . . . . . . . . . . 62WHC . . . . . . . . . . 172WHR . . . . . . . . . . 172WMC . . . . . . . . . 173WR . . . . . . . . . . . . 168
ZZ . . . . . . . . 109, 176
2500 . . . . . . . . . . 1144000 . . . . . . . . . . 11411- . . . . . . . . . . . . . . . 6041- . . . . . . . . . . . . . . . 6143- . . . . . . . 61, 11645- . . . . . . . . . . . . . . . 6172- . . . . . . . . . . . . . . . 6083- . . . . . . . 61, 116
Applied Power, founded in 1910,originally supplied hand grindingwheels, and later water pumps forthe Ford Model T motor car.Subsequently, Applied Powerbecame involved with high pressurehydraulics technology, which is thebasis of its present Enerpac andPower-Packer businesses. AppliedPower is now a large and diversegroup, consisting of six companies,each a leader in its own field.
Enerpac manufactures anddistributes high force hydraulic andother tools on a global basis for themanufacturing and constructionindustries, for production,maintenance and repair.
GB Electrical provides a wide arrayof electrical tools to the retail andwholesale electrical distributionmarkets, primarily in North America.
Power-Packer is an expert inhydraulic positioning systems forthe automotive industry. Its convertible top actuators,suspension systems and rollstabilizer systems can be found inall major car makes.
Barry Controls specializes in noiseand vibration control for the aviationindustry worldwide.
Apitech’s expertise is in digitallycontrolled valves, the keycomponents in electro-hydraulicsystems.
Wright Line develops office andlaboratory technical furnituresystems that help create moreefficient working environments.
The World
4
LLifting, pushing, pulling, bending, spreading, cutting,
lowering, pressing, punching . . . that is the real world of
Enerpac. Providing the professionals with hydraulic tools to
work with and be profitable.
Apart from their very attractive color, Enerpac products have
one more thing in common; they are all Expert Designed.
What does that mean? Being the first company worldwide
with high pressure hydraulics, Enerpac had to learn by
experience. Nothing was taken for granted since there were
no established benchmarks. Every new project has been a
learning process. Building experience by working hands-on
with newly developed products. Adapting our ideas to
developing tailor-made solutions and services for the young
industrialized world.
Enerpac is grateful and proud of
the way it has become the
recognized global market
leader in high pressure
hydraulics.
Today there are new
technologies to work
with, to learn from and
to understand and apply.
Our customers can always be
assured that an Enerpac high
pressure hydraulic cylinder, tool
or pump is Expert Designed.
It will perform superbly for the
job it was designed for,
at all times.
Logistics ExcellenceMaintaining service excellence in
the changing world of moderndistribution is Enerpac’s mission.
This demands the highestexpertise in logistics. Expertise
reflected in the way we serve ourthousands of distributors
worldwide, through our extensiverange of products.
A tradition of InnovationBeing the market leader means constantly findingnew solutions to better meet the challenges ofindustry. Enerpac’s list of innovations in its field issecond to none - from Golden Ring bearings (forlonger cylinder life) to Genesis Technology (for higher pump productivity), from WalkPac™
and composite hand pumps (for total portability) to the Turbo Air pump (for increased efficiency and durability).
of EnerpacTotal QualityEvery single product wemake is individually testedto the most exactingstandards. Only in this way can weguarantee to meet thequality, price andperformance requirementsof the markets we servearound the globe.
ISO-9001 CERTIFICATED FIRM
5
10 Good Reasons to10 Work with Enerpac
• Expert Design• Reliability• Service Excellence• Worldwide Experience• Application Support• Availability• Quality• Value• Innovative Products• Global Vision
Enerpac Hydraulic Cylinders ®
Hydraulic Technology Worldwide
N
A
N
P
W
B
Z1
IZ
X
F
WD
K
E H
X
QF1
3/8"-
18NPT
K
F
A
J
B
E
HARDENED SADDLE
prevents plungerfrom mushroomingand jamming in thetop bearing. Snap-in design.
CHROME PLATED
PLUNGER
resists wear andrust.
PLUNGER WIPER
reduces contamination,extending cylinder life.
GOLDEN RING
absorbs eccentricloading without galling cylinder parts.
PLUNGER RETURN
SPRING
enables fast plungerretraction on single-acting cylinders.
ENERPAC hydraulic cylinders are available in over
100 different configurations.
Whatever the industrial application is – lifting, pushing,
pulling, bending, holding... whatever the capacity, size,
stroke or model the industry needs – single- or double-
acting, solid or hollow plunger or spread type – there is an
Enerpac cylinder to fit the application.
Most Enerpac cylinders are designed to ANSI B30.1.
Golden Ring Design
The exclusive GoldenRing Design is a unique bearing designwhich absorbs eccentric load stresses toprotect your cylinder against abrasion,over-extending or plunger blow-outs andjamming or top-end mushrooming. As a result, Golden Ring cylinders givelong, trouble-free operation.
GOLDEN RING
absorbs eccentricloading without galling cylinder parts.
6
All ton values specified in thiscatalog are metric tonnes andare for cylinder classidentification only. Please
refer to the kN data for calculations.
Not
e: T
he c
ut-a
way
dra
win
g is
rep
rese
ntat
ive
of ty
pic
al c
ylin
der
con
stru
ctio
n, a
nd m
ay n
ot re
pre
sent
all
cylin
der
s in
this
sec
tion.
7®
RC
RCA
CLPRSMRCS
BRCBRP
RCH
RRH
BRD
RR
CLS
CLR
JHAJTAJH/JHL
SC
Cylinder Section Overview
5 -95
30-50
5-520
2,5-50
13-145
4 - 23
10 - 520
50-1000
100-1000
50-1000
N/A
1,5-150
5-95
(45-933)
(292-498)
(45-5114)
(24-505)
(125-1429)
(35-222)
(101-5108)
(496-10260)
(929-10265)
(496-10260)
(13-1335)
(45-931)
16-362
50-152
6-62
63 -155
8- 258
28- 260
57-1219
50 -300
50-300
50-300
N/A
76 -508
38-362
General Purpose Cylinders,Single-Acting(incl. accessories)
Aluminium Cylinders,Single-Acting
Pancake and Low Height Cylinders, Single-Acting
Pull Cylinders, Single-Acting
Hollow Plunger Cylinders Single- and Double-Acting
Precision Production Cylinders,Double-Acting(incl. mounting attachments)
Long Stroke Cylinders, Double-Acting
High Tonnage Cylinders,Single-Acting,Corrosion Protected
High Tonnage Cylinders,Double-Acting
High Tonnage Cylinders, Single-Acting with Mechanical Locknut, Corrosion Protected
Synchronous Lift SystemsStage Lift SystemsStrand Lift Systems
Aluminium JacksSteel Jacks
Cylinder - Pump Sets
8 E
13 E
14 E
16 E
18 E
20 E
22 E
24 E
26 E
30 E
34 E
38 E
42 E
48 E
50 E
Capacityton (kN)
Stroke Range (mm)
Cylinder type and functions Series Page
CLL
SLBLSST
RC-Series, Single-Acting Cylinders
8
®
Hydraulic Technology Worldwide
H Shown from left to right: RC-506, RC-50, RC-2510, RC-154, RC-10010, RC-55, RC-1010
H RC cylinder mounting attachments greatlyextend the application possibilities (availablefor 5, 10,15 and 25 ton cylinders).
H Stage lifting set up in Greece, where assembled pipes, 25 meters in length,were stage lifted with six RC-2514 cylinders.
The IndustryStandard GeneralPurpose Cylinder
Saddles
All RC cylinders are equipped with hardenedremovable grooved saddles.For tilt and flat saddles, see
the RC-Series accessory page.
Page: 12
Base Plates
To ensure the stability of cylinders for lifting appli-cations, base plates are available for 10, 25
and 50 ton RC cylinders.
Page: 12
Specialty Attachments
For solving all kinds of appli-cation problems, specialtyattachments are available for5, 10 and 25 ton RC cylinders.
Page: 162
• Collar threads, plunger threads and base mountingholes enable easy fixturing (on most models)
• Designed for use in all positions • Removable strap handles for unobstructed fixturing
(RC-5013, RC-7513 and both 95 ton models) • High strength alloy steel for durability• Nickel plating available on most models (contact
Enerpac for details)• Heavy duty return springs• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending
cylinder life
9®
H QUICK SELECTION CHARTFor complete technical information see next page.
Single-Acting, General Purpose Cylinders
6,56,56,56,56,56,514,514,514,514,514,514,514,514,520,320,320,320,320,320,320,320,333,233,233,233,233,233,233,233,242,171,271,271,271,2102,6102,6133,3133,3
162576
1271772322654
1051562032573043562551
1011522032543053562650
10215821026131136220951
101159337156333168260
4111016521527332389
121171247298349400450124149200271322373423474139165215273323374425476387176227282460285492357449
5(45)
10(101)
15(142)
25 (232)
30 (295)
50(498)
75(718)
95(933)
CylinderEffective
Area
(cm2)
CylinderCapacity
ton(kN)
Stroke
(mm)
CollapsedHeight
(mm)
ModelNumber
1016508311515138781522262943734415165110420530841151661972386166339525697867
10331202880362719
113123991601341722393466
OilCapacity
(cm3)
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006*RC-10010
1,01,01,51,92,42,81,82,33,34,45,46,46,88,23,34,15,06,88,29,5
10,911,85,96,48,2
10,012,214,116,317,718,115,019,123,137,629,559,059,072,6
Weight
(kg)
* Available as set, see note on this page.** RC-50 cylinder has non removable grooved saddle and no collar thread.
Golden Ring Design
Enerpac RC-Cylindersincorporate the Golden Ring Design, forlong, trouble-free performance.
RCSeries
Capacity:
5-95 tonStroke:
16-362 mmMaximum Operating Pressure:
700 bar
Speed Chart
See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ todetermine your approximatecylinder speed.
Page: 103
Gauges
Minimize the risk of overloading and ensurelong, dependable servicefrom your equipment. Refer
to the System Components Section for a full range of gauges.
Page: 105
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure the integrity of
your system, specify only Enerpachydraulic hoses.
Page: 106
Pump and Cylinder Sets
All cylinders markedwith an * are available
as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.
Page: 50
10
®
Hydraulic Technology Worldwide
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006*RC-10010
RC-Series, Single-Acting Cylinders
3/8"-18NPT
V
U
LM
D
H
E
A
F
B
D1
Extended Height
B(mm)
F For full features see previous page.
162576
1271772322654
1051562032573043562551
1011522032543053562650
10215821026131136220951
101159337156333168260
6,56,56,56,56,56,5
14,514,514,514,514,514,514,514,520,320,320,320,320,320,320,320,333,233,233,233,233,233,233,233,242,171,271,271,271,2
102,6102,6133,3133,3
4111016521527332389
121171247298349400450124149200271322373423474139165215273323374425476387176227282460285492357449
5(45)
10(101)
15(142)
25 (232)
30 (295)
50(498)
75(718)
95(933)
Stroke
(mm)
CylinderCapacity
ton(kN)
CylinderEffective
Area
(cm2)
CollapsedHeight
A(mm)
ModelNumber
10165083
1151513878
15222629437344151651
10420530841151661972386
166339525697867
10331202880362719
113123991601341722393466
Oil Capacity
(cm3)
57135241342450555115175276403501606704806149200301423525627728830165215317431533635736838596227328441797441825525709
58***3838383838575757575757575769696969696969698585858585858585
101127127127127146146177177
OutsideDia.
D(mm)
H
W
X
Z
K
A
E
B
O
P
U1
P
O
J
F
V3/8"-18NPT
DU
RC-50
RC-101 only(U1 = 19 mm)
RC-1006 and RC-10010 models
RC-51 to RC-7513 models
* Available as set, see note on this page.** RC-50 cylinder has non removable grooved saddle and no collar thread.*** D1 = 41 mm, L = 20 mm, M = 25 mm.
Pump and Cylinder Sets
All cylinders markedwith an * are available
as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.
Page: 50
11®
RC-50**RC-51RC-53RC-55*RC-57RC-59RC-101RC-102*RC-104RC-106*RC-108RC-1010*RC-1012RC-1014RC-151RC-152RC-154*RC-156*RC-158RC-1510RC-1512RC-1514RC-251RC-252*RC-254*RC-256*RC-258RC-2510RC-2512RC-2514*RC-308RC-502RC-504RC-506*RC-5013RC-756RC-7513RC-1006*RC-10010
Single-Acting, General Purpose Cylinders
28,728,728,728,728,728,742,942,942,942,942,942,942,942,950,850,850,850,850,850,850,850,865,065,065,065,065,065,065,065,073,295,295,295,295,2
114,3114,3130,3130,3
25,425,425,425,425,425,438,138,138,138,138,138,138,138,141,441,441,441,441,441,441,441,457,257,257,257,257,257,257,257,257,279,579,579,579,595,295,2
104,9104,9
191919191919191919191919191919191925252525252525252525252525573333353530304141
**2525252525–
3535353535353538383838383838385050505050505050507171717171717171
**14141416166191919191919192525252525252525252525252525252525————————
1,01,01,51,92,42,81,82,33,34,45,46,46,88,23,34,15,06,88,29,5
10,911,85,96,48,2
10,012,214,116,317,718,115,019,123,137,629,559,059,072,6
Weight
(kg)
**66666–66666669999999910101010101010101022225522
**13/4" - 163/4" - 163/4" - 163/4" - 163/4" - 16
#10 - 24UN
1" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 81" - 8
11/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 16
————————
5,6 mm1/4"- 20UN
1/4"- 20UN
1/4"- 20UN
1/4"- 20UN
1/4"- 20UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
5/16"- 18UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
3/8"- 16UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
—1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
1/2"- 13UN
——
3/4"- 10UN
3/4"- 10UN
ModelNumber
—2828282828262826282628262630303030303030304949494949494949495555555544444444
—1414141414121212121212121212121212121212121919191919191919—19191919——2525
282525252525393939393939393947474747474747475858585858585858—95959595——
139139
—11/2" - 1611/2" - 1611/2" - 1611/2" - 1611/2" - 1621/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1421/4" - 1423/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1623/4" - 1635/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 1235/16" - 12
5" - 125" - 125" - 125" - 12
53/4" - 1253/4" - 1267/8"- 1267/8" - 12
RCSeries
Capacity:
5-95 tonStroke:
16-362 mmMaximum Operating Pressure:
700 bar
Couplers Included!
CR-400 couplers included on all models.Fits all HC-Serieshoses.
CylinderBore Dia.
E(mm)
PlungerDia.
F(mm)
Base toAdv. Port
H(mm)
SaddleDia.
J(mm)
Plunger Thread Length
P(mm)
Saddle Protr.
from Plgr. K
(mm)
PlungerInternal Thread
O
Base Mounting Holes CollarThread
W
CollarThreadLength
X(mm)
Thread
V
Thd. Depth
Z(mm)
BoltCircle
U(mm)
12
®
Hydraulic Technology Worldwide
See our‘YellowPages’
for applicationinformation on these acces-sories.
CD
E H
F
G
AB
B
E
D G
F
AH
DC
B
E C
A
B
E
GI
D
F
A
C
H
Grooved
Base Plate Dimensions (mm)
Tilt
For usewith
Cylinder Capacity
ton (kN)
RC-Series, Cylinder Accessories
Flat Grooved1) Tilt Base4) Plunger
BasePlate
Saddles MountingBlock
Clevis Eyes
A-53F2)
A-102F3)
––––––
A-53G2)
A-102G3)
A-152GA-252GA-252G
–––
RB-52), AW-512), AW-532)
RB-10, AW-102RB-15RB-25RB-25
–––
–
JBI-10–
JBI-25–
JBI-50––
–
CAT-103)
CAT-10CAT-50CAT-50CAT-100CAT-100CAT-100
5 (45)
10 (101)
15 (142)
25 (232)
30 (295)
50 (498)
75 (718)
95 (933)
C
AB
C
AB
A
B
C
0-5°
Model Nr.
A-53FA-102F
A-53GA-102GA-152GA-252G
REB-5REB-10REB-15REB-25REP-5REP-10REP-25
Base4)
Plunger
A
B 0-5°
E FB
AC D D
AC
EFB
1722
17222235
2535
25353850
66
6699
Model Nr.
Model Nr.Type
A
A
B C D E
A
A
B C D E F
B AC B C
RB-5AW-51AW-53RB-10AW-102RB-15RB-25
Model Nr.
JBI-10JBI-25
JBI-50
D
A
CE
B
C
D
B
AE
Model Nr.
CAT-10CAT-50
CAT-100
3550
71
228279
304
228279
15
135140
95
5886
131
2026
31
44637695284257
47666679416174
14252538142538
16222231162231
16252531162531
25353541192835
11/2"- 1611/2"- 1611/2"- 1621/4"- 1421/4"- 1423/4"- 1635/16"- 12
887072114100101127
765978882
114127
–107–
16––
25241925303850
–5457–
76––
–1/4"- 201/4"- 20
–7/16"- 20
––
–4110–
58––
1521
24
2235
–
B C D E F G H
JBI-10, -25
REB REP
AW-51 AW-102 (I=4,8)RB-5, -10 RB-15, -25 AW-53
JBI-50
Saddle Dimensions (mm) Tilt Saddle Dimensions (mm)
Mounting Block Dimensions (mm)
Clevis Eye Dimensions (mm)
Flat
H SELECTION CHART
H DIMENSION CHARTS
1) Standard on 5-30 ton RC-cylinders 2) Except RC-50 3) Except RC-101 4) Mounting screws are included.
Tilt
REB-52)
REB-10REB-15REB-25
––––
REP-52)
REP-103)
REP-10REP-25REP-25
–––
13®
RCASeries
Single-Acting, Aluminium Cylinders
• Light weight, aluminium design for maximum portability• ANSI B30.1 design and test specification approvals guar-
antee increased product life and user safety• Designed for use in all positions• Steel base-plate for increased durability• Base and plunger are hard coat anodized• CR-400 coupler and dust cap included on all models• Plunger wiper extends life
212421638
41,741,741,7
Extend.Height
B(mm)
Outside Dia.
D(mm)
Cyl. Bore Dia.
E(mm)
PlungerDia.
F(mm)
72,972,972,9
Weight
(kg)
Coll.Height
A(mm)
232336445
181235292
Baseto Adv.
Port H
(mm)
120120120
Saddle Protr.
from Plgr.K
(mm)
Saddle Dia.
J(mm)
57,257,257,2
5,47,0
10,0
111
575757
505050
H
KF
A
J
D
B
E3/8"-18NPT
51101153
30 (292)
Stroke
(mm)
Cylinder Capacity
ton (kN)
CylinderEffective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
RCA-302RCA-304RCA-306
Capacity:
30-50 tonStroke:
50-153 mmMaximum Operating Pressure:
700 bar
Saddles
The RCA cylinders areequipped standard withgrooved saddles. For applications requiring a
tilt saddle, the CAT-101 (50 ton) is available as an accessory.
Page: 17
3567261089
71,271,271,2
95,295,295,2
227329431
177227278
149149149
79,279,279,2
9,812,014,3
333
454545
717171
50102153
50 (498)RCA-502RCA-504RCA-506
F Light weight Hand Pump
If your choice is an RCA aluminiumcylinder, then an Enerpac P-392 or P-802 composite hand pump wouldmake the optimal light weight set.
H Shown from left to right: RCA-506, RCA-502
CLP-Series, Pancake Lock Nut Cylinders
14
®
Hydraulic Technology Worldwide
60 (606)100 (1027)160 (1619)200 (1999)260 (2567)400 (3916)520 (5114)
50504545454545
86,6146,8231,3285,6366,8559,5730,6
432734
10401285165025173287
CylinderCapacity
ton (kN)
Stroke
(mm)
CylinderEffective
Area
(cm2)
OilCapacity
(cm3)
ModelNumber*
CLP-602CLP-1002CLP-1602CLP-2002CLP-2502CLP-4002CLP-5002
H Shown from left to right: CLP-2002, CLP-5002
• Extremely low height for use in confined areas• Safety lock nut for mechanical load holding• Single-acting, load return• Optional special synthetic coating for improved corrosion
resistance and lower friction for smoother operation towithstand side load forces up to 3% of rated cylindercapacity without scoring
• Overflow port functions as a stroke limiter• CR-400 coupler and dust cap included on all models
The Lowest Power Lifter
H Only the extreme low height CLP-cylinder fits in thisconfined area to lift the construction.
Saddles
All CLP-Series cylindersinclude integral tilt saddleswith maximum tilt angles up to 5°.
Gauges
Minimize the risk of overloa-ding and ensure long,dependable service fromyour equipment. Refer to the
System Components Section for a fullrange of gauges.
Page: 105
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure the integrity of
your system, specify only Enerpachydraulic hoses.
Page: 106
* For special synthetic coating add suffix ‘C’ to modelnumber.
15®
Single-Acting, Pancake Lock Nut Cylinders
E
H
D
F
R
J
3/8"-18NPT
S
A
B
K
125137148155159178192
Coll.Height
A(mm)
175187193200204223237
Ext.Height
B(mm)
140175220245275350400
OutsideDiameter
D(mm)
105,0136,7171,6190,7216,1266,9305,0
Tr 104 x 4Tr 136 x 6Tr 171 x 6Tr 190 x 6Tr 216 x 6Tr 266 x 6Tr 305 x 6
Cyl. BoreDiameter
E(mm)
19212730323948
96126160180200250290
689
10111110
5°5°5°5°5°4°3°
28314043445562
1526445774
134189
Base to Adv. Port
H(mm)
SaddleDiameter
J(mm)
Saddle Protr.
from Plgr.K
(mm)
SaddleMax. Tilt
AngleR
Lock NutHeight
S(mm)
Weight
(kg)
PlungerDiameter
F(mm)
CLPSeries
Capacity:
60-520 tonStroke:
45-50 mmMaximum Operating Pressure:
700 bar
ModelNumber*
CLP-602CLP-1002CLP-1602CLP-2002CLP-2502CLP-4002CLP-5002
ALL CLP-SERIES CYLIN-DERS REQUIRE A SOLIDLIFTING SURFACE FORCORRECT SUPPORT.
USE OF PANCAKE CYLINDERS ONSURFACES SUCH AS SAND, MUD ORDIRT, MAY RESULT IN CYLINDERDAMAGE!
WRONG! RIGHT!
Rough soil Flat Lifting Surface
For more safety instructions see our ‘Yellow Pages’.
Page: 94
✗ ✓
Speed Chart
See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ todetermine your approximatecylinder speed.
Page: 103
16
®
Hydraulic Technology WorldwideRSM/RCS-Series, Low Height Cylinders
6121113161616163845626057
418325599
16420331755
129261373722
5 (45)
10 (101)
20 (201)
30 (295)
45 (435)
75 (718)
90 (887)
150 (1386)
10 (101)
20 (201)
30 (295)
45 (435)
90 (887)
Stroke
(mm)
Cyl. Capa-
city
ton (kN)
Cyl.Effect.Area
(cm2)
ModelNumber
6,514,528,742,162,1
102,6126,7198,114,528,742,162,1
126,7
Oil Cap.
(cm3)
RSM-50RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500RCS-101*RCS-201*RCS-302*RCS-502*RCS-1002*
H Shown from left to right: RSM-1000, RSM-300, RSM-50, RCS-1002, RCS-302
RSM-series, Flat-Jac® Cylinders• Compact, flat design for use where most other cylinders
will not fit• RSM-750, 1000 and 1500 have handles for easy carrying• Mounting holes permit easy fixturing• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models,
except RSM-50 which is fitted with an AR-400 coupler.• Hard chrome plated high quality steel plungers• Grooved plunger ends require no saddle
RCS-series, Low Height Cylinders• Lightweight, low profile design for use in confined spaces• Baked enamel finish for increased corrosion resistance• Plunger wiper reduces contamination, extending
cylinder life• CR-400 coupler and dust cap included on all models• Grooved plunger end with threaded holes for mounting tilt
saddles• Integral handle on RCS-1002 for easy carrying• Hard chrome plated steel plungers
H Only a couple of centimeters will do for an RSM-cylinder to lift a large steel construction.
Maximum Power to Height Ratio
Saddles
All RCS-Series cylindershave plunger mounting holesfor installation of tilt saddles.See table for selection and
dimensional information.
Page: 17
Machine Lift
In very confined work areasa machine lift often offers thesolution for lifting the first few millimetres.
Page: 169
* Available as set, see note on next page.
17®
ModelNumber
CAT-11CAT-51CAT-101
Single-Acting, Low Height Cylinders
58 x 4182 x 55
101 x 76117 x 95
139 x 114165 x 139177 x 152215 x 190
6992
101127165
28,742,960,573,288,9114,3127,0158,842,960,573,288,9127,0
16191919191919231717192331
Ext.Height
B(mm)
OutsideDiameter
D(mm)
CylinderBore Dia.
E(mm)
PlungerDia.
F(mm)
1,01,43,14,56,8
11,314,526,34,15,06,8
10,922,7
Weight
(kg)
CollapsedHeight
A(mm)
385462718295
101116126143179182198
25,438,150,850,869,882,692,2
114,338,150,866,569,892,2
Base toAdv. Port.
H(mm)
1112222253321
2027394757697695–––––
2234394453667482–––––
PlungerProtrusionfrom Base
K(mm)
ModelNumber
––––––––
2639393955
BoltCircle
U(mm)
––––––––
M4M5M5M5M8
––––––––8888
10
Thread
O(mm)
Plungerto
BaseL
(mm)
Plungerto Mtg.
Hole M
(mm)
ThreadDepth
P(mm)
RSM-50*RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500RCS-101*RCS-201*RCS-302*RCS-502*RCS-1002*
H
KF
P
A
D
B
3/8"-18NPT
E
O
U
3/8"-18NPT
E
H
K
F
AB
U1
L
D
VM
28364952667676
117
57
101011131313
7,910,715,115,919,020,620,620,6
4,37,99,9
11,212,714,214,214,2
BoltCircle
U1
RSM Cylinder Mounting Hole Dimensions (mm)
HoleDia.
V
CounterBoreDia.
CounterBore
Depth
RSM-50RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500
ModelNumber
355071
101517
212935
A B C*
Optional Bolt On Tilt Saddle Dimensions (mm)
For Cylinder Model:
RCS-101RCS-201, -302, -502RCS-1002
RSM-SeriesRCS-Series
32425158667985
1008898
117122141
A
BC 0-5°
RSMRCSSeries
Capacity:
5-150 tonStroke:
6-62 mmMaximum Operating Pressure:
700 bar* ‘C’ dimension equals saddle protrusion from plunger. Mounting screws are included.
Pump and Cylinder Sets
All cylinders markedwith an * are available
as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.
Page: 50
18
®
Hydraulic Technology WorldwideBRC/BRP-Series, Pull Cylinders
• High strength alloy steel construction• Plunger blow-out protection to prevent rod over-extension• Hard chrome-plated plunger for long life• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Baked enamel finish for increased corrosion resistance• Plunger wiper reduces contamination, extending
cylinder life
H Shown from left to right: BRC-25, BRC-46, BRP-306, BRP-606, BRP-106C
H Ship building, welding and Enerpac pull cylinders go hand in hand.H In this roof construction an Enerpac pull cylinder
is applied to position the parts to be welded.
For use withSubassemblies andModules
Attachments and Accessories
BRC-25 and BRC-46 unitshave base, collar and plun-ger threads to affix
a range of optional attachments andaccessories, such as chains, saddlesand extension tubes.
Page: 162
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components Section for a fullrange of gauges.
Page: 105
Pump and Cylinder Sets
All cylinders markedwith an * are available
as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.
Page: 50
Single-Acting, Pull Cylinders
19®
Ext.Height
B(mm)
Coll.Height
A(mm)
Cyl.Effect.Area
(cm2)
Oil Cap.
(cm3)
BRP-106C*BRP-106L*BRP-302BRP-306BRP-606*
15,015,046,646,672,1
2272272947221096
58754110331085719
738692
10961240871
8585
136136140
54,154,188,988,9
110,0
11967
114114130
62115145145149
3022353539
3530393950
3232505070
15,913,234,048,153,5
Cylinder Capacity
ton (kN)
ModelNumber
10 (105)
30 (326)
50 (505)
15115163
155152
Stroke
(mm)
OutsideDia.
D(mm)
Cyl. Bore Dia.
E(mm)
LinkOpen-
ingL
(mm)
LinkThick-ness
M(mm)
LinkWidth
N(mm)
Slot toLinkEnd
T(mm)
Weight
(kg)
LinkHeight
J(mm)
Ext.Height
B(mm)
Coll.Height
A(mm)
Cyl.Effect.Area
(cm2)
Oil Cap.
(cm3)
BRC-25BRC-46BRC-106
Cylinder Capacity
ton (kN)
ModelNumber
2,5 (24)
5 (51)
10 (105)
127140151
Stroke
(mm)
Outs.Dia.
D(mm)
Cyl.Bore Dia.
E(mm)
Plgr.Dia.
F(mm)
Top toInletPort
H(mm)
SaddleDiameter
J
Plgr.Thd.Lgth.
P(mm)
PlungerOutsideThread
Q
Weight
(kg)
––
25
3,57,315,0
45101228
264301289
391441440
485785
28,442,954,1
19,030,231,8
454239
3/4"- 14 NPT11/4"-111/2 NPT
–
11/16"- 2413/16"-16M30X2
1,84,59,5
3/8"-18NPT
H
Z
V ED
PXA
B
F JQ W
Q
P
Q
3/4" - 14 NPT11/4"-111/2 NPT
M30 x 2
11/2"- 16 UN
21/4"- 16 UN
M85 x 2
242625
172424
BRC Cylinder Mounting Dimensions (mm)
Base Mounting
HoleV
CollarThread
W
CollarThd. Lgth.
X
Mtg.Thd. Lgth.
Z
BRC-25BRC-46BRC-106
ModelNumber
N
A TB
L
M
3/8"-18NPT
E
D J
M30 x 2
AB
N
M
J
L T3/8"-18NPT
E
DN
D J
M
TAB
E
3/8"-18NPT
L11/4"-7UNC
M
DN
3/8"-18NPT
AB
L
T
E
J
M50 x 3
M30 x 2
BRP-106C
BRC-25 to BRC-106
BRC-106 only
BRP-106L
BRP-302 and BRP-306
BRP-606
* Fitted with rubber bellows for rod protection.
BRC/BRPSeries
Capacity:
2,5-50 tonStroke:
63-155 mmMaximum Operating Pressure:
700 bar
20
®
Hydraulic Technology WorldwideRCH-Series, Hollow Plunger CylindersH Shown from left to right: RCH-306, RCH-120, RCH-1003
H Two RCH-121 cylinders (13 ton) are used here to clamp this large die. The hollow plunger allows fixturing the slot bolt.
842427649
15564
15576
15376
147575
141150476298722626
12591011
13 (125)
20 (215)
30 (326)
60 (576)
95 (931)
Stroke
(mm)
CylinderCapacity
ton (kN)
Cyl.Effect. Area
(cm2)
ModelNumber
17,917,917,918,530,730,746,646,682,382,3
133,0
Oil Cap.
(cm3)
RCH-120RCH-121*RCH-1211RCH-123RCH-202*RCH-206RCH-302*RCH-306RCH-603*RCH-606RCH-1003*
Versatility in Testing,Maintenance and Tensioning Applications
* Available as set, see note on this page.
Saddles
Most RCH-Series cylinders are equipped with smoothsaddles. See table at nextpage for optional threaded
saddles and all dimensional information.
Page: 21
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure the integrity of
your system, specify only Enerpachydraulic hoses.
Page: 106
• Hollow plunger design allows for both pull and push forces• Nickel-plated, floating center tube on models over 20 ton
increases product life• Baked enamel finish for increased corrosion resistance• Collar threads for easy fixturing• RCH-120 includes AR-630 coupler and has 1/4" NPT port• RCH-121 and RCH-1211 have FZ-1630 reducer and
AR-630 coupler, all other models feature CR-400 coupler
Pump and Cylinder Sets
All cylinders markedwith an * are available
as sets (cylinder, gauge,couplers, hose and pump) for your ordering convenience.
Page: 50
BC
A
BC
A
21®
ModelNumber
Single-Acting, Hollow Plunger Cylinders
696969699898
114114159159212
54,154,154,154,173,173,188,988,9
123,9123,9165,1
––––
545463639191126
Ext.Height
B(mm)
Out.Dia.
D(mm)
Cyl.Bore Dia.
E(mm)
Plgr.Dia.
F
(mm)
Weight
(kg)
Coll.Height
A(mm)
55120120184162306178330247323254
63162162260212461242485323476330
35,135,135,135,154,154,163,563,591,991,9127,0
919191919252125313138
Cyl. Baseto Advance
Port H
(mm)
––––6699121212
3/4"- 16 UN
–3/4"- 16 UN
–19/16"- 16 UN
19/16"- 16 UN
113/16"- 16 UN
113/16"- 16 UN
23/4"- 16 UN
23/4"- 16 UN
4"- 16 UN
Saddle Dia.
J(mm)
Saddle Protr.
from Plgr.K
(mm)
ModelNumber
19,619,619,619,626,926,933,333,353,853,879,0
1,52,82,84,47,7
14,110,921,828,135,463,0
CenterHoleDia.Y
(mm)
16–
16–
19192222191925
3030303038384242484860
23/4"- 1623/4"- 1623/4"- 1623/4"- 1637/8"- 1237/8"- 1241/2"- 1241/2"- 1261/4"- 1261/4"- 1283/8"- 12
Plunger InternalThread
O
CollarThread
W
CollarThreadLength
X(mm)
PlungerThreadLength
P(mm)
RCH-120RCH-121*RCH-1211RCH-123RCH-202*RCH-206RCH-302*RCH-306RCH-603*RCH-606RCH-1003*
50,8––
50,882,682,692,292,2130,3130,3177,8
5/16"-18 UNC
––
5/16" -18 UNC3/8"-16 UNC3/8" -16 UNC3/8" -16 UNC3/8" -16 UNC1/2" -13 UNC1/2" -13 UNC5/8" -11 UNC
6,4––
12,715,715,714,014,014,014,019,0
Bolt Circle
U
Base Mounting Hole Dimensions (mm)
ThreadDepth
Z
Thread
V
RCH-120RCH-121RCH-1211RCH-123RCH-202RCH-206RCH-302RCH-306RCH-603RCH-606RCH-1003
V
Y U D
H
3/8"-18NPT
F
P
OW
X
Z
A
B
E 3/8"-18NPT
Z
H
X
A
B
KF
P
OJW
Y U D
V
E
RCH-120 to RCH-123 models RCH-202 to RCH-1003 models
RCHSeries
Capacity:
13-95 tonStroke:
8-155 mmMaximum Operating Pressure:
700 bar
Saddle Dimensions (mm)Saddle Model Nr.
HP-2035HP-3044HP-5035HP-10033HP-2015HP-3015HP-5016HP-10016
Cylinder Model Number
RCH-202, 206RCH-302, 306RCH-603, 606RCH-1003RCH-202, 206RCH-302, 306RCH-603, 606RCH-1003
Saddle Type
Smooth*Hollow
ThreadedHollow
536391126536391126
Optional Heat Treated Hollow Saddles
991213991213
26,933,353,879,01"- 8
11/4"- 715/8"- 51/2
21/2"- 8
A B C
* Standard on all RCH-models (except RCH 13 ton range).
RCH-121 and RCH-1211 have a 47 mm dia. boss that protrudes 6 mm from base.
RRH-Series, Hollow Plunger Cylinders
22
178258891662573876153257203
30,430,454,254,254,287,487,487,487,4
102,6
8291202733
13662115505
1011203534204144
541784482900
1393333666
133722462083
30
60
95
145
Stroke
(mm)
CylinderClass
ton
Cylinder Effective Area
(cm2)
Max. CylinderCapacity
(kN)
ModelNumber
326326576576576931931931931
1429
213213380380380612612612612718
46,646,682,382,382,3
133,0133,0133,0133,0204,1
Oil Capacity
(cm3)
RRH-307RRH-3010RRH-603RRH-606RRH-6010RRH-1001RRH-1003RRH-1006RRH-10010RRH-1508
AdvanceAdvance AdvanceRetractRetract Retract
H Shown from left to right: RRH-3010, RRH-1001, RRH-6010
• Relief valves prevent damage in case of over-pressurisa-tion
• Baked enamel finish for increased corrosion resistance• Collar threads enable easy fixturing
(except RRH-1001 and RRH-1508)• Double-acting version for fast retraction• Nickel-plated, floating center tube increases product life• Hollow plunger allows for both pull and push forces• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending
cylinder life
Versatility in Testing,Maintenance and Tensioning Applications
H Double-acting hollow plunger cylinders areapplied at this site to level bridge sections.
Saddles
All RRH-Series cylinders are equipped with smoothsaddles. See table at nextpage for optional threaded
saddles and all dimensional information.
Page: 23
Pump Selection
A double-acting cylindermust be powered by a pumpwith a 4-way valve.
Page: 53
®
Hydraulic Technology Worldwide
Gauges
Minimize the risk of overloading and ensurelong, dependable servicefrom your equipment. Refer
to the System Components Section for a full range of gauges.
Page: 105
23®
912
13
139
12
13
13
Double-Acting, Hollow Plunger Cylinders
114114159159159212212212212247
88,988,9
123,9123,9123,9165,1165,1165,1165,1190,5
60606666664485858560
6363919191126126126126127
Ext. Height
B(mm)
Out. Dia.
D(mm)
Cyl. Bore Dia.
E(mm)
Plgr.Dia.
F(mm)
2127283545336179
106111
Weight
(kg)
Coll. Height
A(mm)
330431247323438165254342460349
508689336489695203330495717552
63,563,591,991,991,9127,0127,0127,0127,0152,4
25253131313838383838
Cyl. Baseto Adv.
Port H
(mm)
Cyl. Topto Return
Port I
(mm)
99121212121212124
113/16"- 16113/16"- 1623/4"- 1623/4"- 1623/4"- 164"- 164"- 164"- 164"- 16
41/4"- 12
Saddle Dia.
J(mm)
SaddleProtr.
fr. Plgr.K
(mm)
ModelNumber
33,333,353,853,853,879,279,279,279,279,2
Center HoleDia.Y
(mm)
22221919192525252525
4242484848–
606060–
41/2"- 1241/2"- 1261/4"- 1261/4"- 1261/4"- 12
–83/8"- 1283/8"- 1283/8"- 12
–
Thread
O
CollarThreadLength
X(mm)
CollarThread
W
PlungerThreadLength
P(mm)
RRH-307RRH-3010RRH-603RRH-606RRH-6010RRH-1001RRH-1003RRH-1006RRH-10010RRH-1508
Z
X
A
B
K
3/8"-18NPT
H
I
F
P
OJW
E
Y U D
V
30°
92,292,2
130,0130,0130,0177,8177,8177,8177,8
–
3/8" - 163/8" - 161/2" - 131/2" - 131/2" - 135/8" - 115/8" - 115/8" - 115/8" - 11
–
15,715,714,014,014,019,019,019,019,0
–
Base Mounting Hole Dimensions (mm)
RRH-307RRH-3010RRH-603RRH-606RRH-6010RRH-1001RRH-1003RRH-1006RRH-10010RRH-1508
Bolt Circle
U
ThreadDepth
Z
Thread
V
ModelNumber
RRHSeries
Capacity:
30-145 tonStroke:
38-258 mmMaximum Operating Pressure:
700 bar
Saddle Dimensions (mm)Saddle Model Nr.
HP-3044HP-5035
HP-10033
HP-10032HP-3015HP-5016
HP-10016
HP-10015
Cylinder Model Number
RRH-307, 3010RRH-603, 606, 6010RRH-1001, 1003, RRH-1006, 10010RRH-1508RRH-307, 3010RRH-603, 606, 6010RRH-1001, 1003, RRH-1006, 10010RRH-1508
Saddle Type
Smooth*Hollow
ThreadedHollow
6391
126
1266391
126
126
Optional Heat Treated Saddles
33,353,8
79,0
80,011/4"- 7
15/8"- 51/2
21/2"- 8
21/2"- 8
BC
A
BC
A
A B C
* Standard on all RRH-models.
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure the integrity of
your system, specify only Enerpachydraulic hoses.
Page: 106
BRD-Series, Precision Production Cylinders
24
2879
1552879
155257159260159260
35353580808080142142222222
1616164444444477779898
5,15,15,111,411,411,411,420,320,331,731,7
2,22,22,26,36,36,36,310,610,613,713,7
1440793290
177293323528504824
61734185098
162169276218356
4
8
15
23
Stroke
(mm)
CylinderCapacity
(ton)
Cylinder Effective Area
(cm2)
Max. CylinderCapacity
(kN)
ModelNumber
Oil Capacity
(cm3)
BRD-41BRD-43BRD-46BRD-91BRD-93BRD-96BRD-910BRD-166BRD-1610BRD-256BRD-2510
AdvanceAdvance AdvanceRetractRetract Retract
H Shown from left to right: BRD-2510, BRD-96, BRD-256, BRD-41, BRD-166
• Designed for long life, the best choice for productionapplications
• Unique mounting configurations simplify fixturing• Baked enamel finish for increased corrosion resistance• Double-acting operation develops force in both
directions, providing maximum versatility• Plunger wiper reduces contamination, extending
cylinder life• Imperial models (RD-series) available on request
High Precision and High CyclePerformance
Golden Ring Design
Enerpac BRD-Cylinders areprovided with the Golden Ring Design,for long, trouble-free performance.
Coll.Height
A(mm)
186237313223274350452389491424526
162213289198249325427359461397499
5050506565656580809292
Ext.Height
B(mm)
BodyLength
C(mm)
Out. Dia.
D(mm)
Cyl. BoreDia.
E(mm)
Plgr.Dia.
F(mm)
214316468251353505709548751583786
25,425,425,438,138,138,138,150,850,863,563,5
19,019,019,025,425,425,425,435,035,047,847,8
This paper mill uses BRD cylinders forprecision when trimming. E
Speed Chart
See the Enerpac Cylinder SpeedChart in our ’Yellow Pages’ todetermine your approximatecylinder speed.
Page: 103
®
Hydraulic Technology Worldwide
25®
D
C
E
AB
F
H
Foot MountingMounts onto cylindercollar
Double-Acting, Precision Production Cylinders
N
A
N
P
W
C
Z1
I
ZX
F
WD
K
E
H
X
B
Q
3/8"-18NPT
2,02,63,63,04,25,67,3
10,214,516,020,3
Weight
(kg)
Bottom toAdvance
Port I
(mm)
4747475757575773738989
2424242525252530302727
PlungerProtrusion
K(mm)
ModelNumber
M16 x 1,5M16 x 1,5M16 x 1,5M22 x 1,5M22 x 1,5M22 x 1,5M22 x 1,5M30 x 1,5M30 x 1,5M42 x 1,5M42 x 1,5
2929293838383854547070
2222222222222228282525
NeckLength
N(mm)
PlungerThreadLength
P(mm)
PlungerExternalThread
Q(mm)
BRD-41BRD-43BRD-46BRD-91BRD-93BRD-96BRD-910BRD-166BRD-1610BRD-256BRD-2510
M42 x 1,5M42 x 1,5M42 x 1,5M56 x 2M56 x 2M56 x 2M56 x 2M70 x 2M70 x 2M85 x 2M85 x 2
1111111414141422222929
M30 x 1,5M30 x 1,5M30 x 1,5M42 x 1,5M42 x 1,5M42 x 1,5M42 x 1,5M56 x 2M56 x 2M70 x 2M70 x 2
999
1414141424242626
Cylinder Mounting Dimensions (mm)
CollarThread
W
CollarThreadLength
X
Int. BaseThread
Z
Int. BaseThreadLength
Z1
H
C
A
D
B
E
F
48
1523
48
1523
48
1523
48
1523
42,156,170,185,1
42,156,170,185,1
M42 x 1,5M56 x 2M70 x 2M85 x 2
M16 x 1,5M22 x 1,5M30 x 1,5M42 x 1,5
80105127159
80105127159
577592
108
M30 x 1,5M42 x 1,5M56 x 1,5M70 x 1,5
10,513,520,026,5
11,011,016,017,0
6,36,76,76,7
16,020,025,032,0
20,025,035,045,0
19,025,435,044,5
9,512,719,025,4
15,925,431,838,2
57,082,5
100,0125,0
––––
––––
19,125,425,425,4
31,844,552,463,5
––––
––––
23,823,830,227,0
BAD-141BAD-171BAD-181BAD-191
BAD-142BAD-172BAD-182BAD-192
BAD-143BAD-173BAD-183BAD-193
BAD-150BAD-151BAD-152BAD-153
ModelNumber
BRD-Cyl.(ton) A B C D E F H
E
C
D
AB
E
C AB
D
Flange MountingMounts onto cylindercollar
Clevis EyeThreads onto plunger orinto cylinder base
Retainer NutFor locking foot or flangemountings. Tightens ontocylinder collar threads(Included with foot andflange mounting kits)
58,078,095,2
117,5
78,698,4
115,9135,7
49,565,581,096,5
33,338,152,355,6
Foot Mounting with Retainer Nut
Flange Mounting with Retainer Nut
Retainer Nut
Clevis Eye
BRDSeries
Capacity:
4-23 tonStroke:
28-260 mmMaximum Operating Pressure:
700 bar
4747475757575773738989
Top toRetract
PortH
(mm)
Dimensions (mm)
H BRD CYLINDER ATTACHMENTS
Pump Selection
A double-acting cylindermust be powered by a pumpwith a 4-way valve.
RR-Series, Double-Acting CylindersH Shown from left to right: RR-10013, RR-1502, RR-20013, RR-1010, RR-7513
26
®
Hydraulic Technology Worldwide
• Collar threads, plunger threads and base mounting holesfor easy fixturing (on most models)
• Baked enamel finish for increased corrosion resistance• Removable hardened saddles protect plunger during lifting
and pressing• Built-in safety valve prevents accidental
over-pressurization• CR-400 couplers included on all models• Plunger wiper reduces contamination, extending
cylinder life
Most VersatilePerformers
Rugged enough for the toughest job site uses and precision designed for high-cycle industrial uses.
H RR-cylinders provide power and precision in a special hydraulic press.
H When it comes to precise and controlled positioning of heavy loads, RR cylinders arethe best solution.
Golden Ring Design
Enerpac RR-Cylindersincorporate the Golden Ring Design, for long, trouble-free performance.
Saddles
All RR-Series cylinders haveplunger mounting holes forinstallation of CAT-Series tiltsaddles.
Page: 12
Page: 53
27®
Double-Acting Cylinders
RR-1010*RR-1012*RR-308*RR-3014*RR-506RR-5013RR-5020RR-756RR-7513RR-1006RR-10013RR-10018RR-1502RR-1506RR-15013RR-15032RR-2006RR-20013RR-20018RR-20024RR-20036RR-20048RR-3006RR-30012RR-30018RR-30024RR-30036RR-30048RR-4006RR-40012RR-40018RR-40024RR-40036RR-40048RR-5006RR-50012RR-50018RR-50024RR-50036RR-50048
25430520936815633451115633316833346057
156333815152330457610914
1219153305457609915
1219152305457610914
1219153305457609915
1219
14,514,542,142,171,271,271,2102,6102,6133,3133,3133,3198,1198,1198,1198,1285,0285,0285,0285,0285,0285,0457,3457,3457,3457,3457,3457,3613,1613,1613,1613,1613,1613,1729,7729,7729,7729,7729,7729,7
4,84,819,119,121,521,521,531,431,462,262,262,295,495,495,495,4145,3145,3145,3145,3145,3145,3243,2243,2243,2243,2243,2243,2328,1328,1328,1328,1328,1328,1405,4405,4405,4405,4405,4405,4
368442879154911112378363816013417223844396132112930906597
1614543329405
130251738526049347416997
13947208892785041843557459319
1870028018374005603774737111642225633347444406676888951
122147400703335718
1099490
1046104520712861544
1488317777752209479566408863
132801771237217418
111141481122253296464987
10007149952001429988399966203
1236518526246893697349418
10(101)
30(295)
50(498)
75(718)
95(933)
140(1386)
200(1995)
325(3201)
440(4292)
520(5108)
Stroke
(mm)
CylinderCapacity
ton(kN)
Cylinder Effective Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
Push PushPull Pull
RRSeries
Capacity:
10-520 tonStroke:
57-1219 mmMaximum Operating Pressure:
700 bar
H QUICK SELECTION CHARTFor complete technical information see next page.
Additional Stroke Lengths
RR-Series cylinders, 325through 520 ton are availablein additional stroke lengths.Please contact Enerpac for
additional stroke length options.
Enerpac CLR-Series
If your application does not require highprecision, Enerpac CLR-series cylindersmay be the right alternative.
Page: 34
Coll.Height
(mm)
409457387549331509733347525357524687196385582
1116430608765917
12221527485638790943
12471552538690843995
13001605577730882
103513391644
Optional Snap-in Saddles
Optional snap-in saddles forRR-series double-actingcylinders:
For additional information on saddles:
SaddleType
Cylinder ModelNumber
SaddleModelNumber
Flat
Grooved
Tilt
RR-1010, 1012RR-1010, 1012RR-308, 3014
RR-1010, 1012RR-308, 3014RR-506, 5013 RR-5020, 756
RR-7513
A-102FA-102GA-252GCAT-10CAT-50
CAT-100
Page: 12
Cylinder retract capacity forcertain RR cylinders may beless than theoretical values,as a result of reduced reliefvalve pressure settings.
Speed Chart
See the Enerpac Cylinder SpeedChart in our ’Yellow Pages’ todetermine your approximatecylinder speed.
Page: 103
P
O
H
X
B
A
NI
K
3/8"-18NPT E
D
J
FW
Z
X
A
B
K
W
3/8"-18NPT
H
I
D
E
F
P
OJ
U
V
RR-Series, Double-Acting Cylinders
28
®
Hydraulic Technology Worldwide
RR-1010*RR-1012*RR-308*RR-3014*RR-506RR-5013RR-5020RR-756RR-7513RR-1006RR-10013RR-10018RR-1502RR-1506RR-15013RR-15032RR-2006RR-20013RR-20018RR-20024RR-20036RR-20048RR-3006RR-30012RR-30018RR-30024RR-30036RR-30048RR-4006RR-40012RR-40018RR-40024RR-40036RR-40048RR-5006RR-50012RR-50018RR-50024RR-50036RR-50048
10
30
50
75
95
140
200
325
440
520
Stroke
(mm)
CylinderCapacity
ton
Cylinder Effective Area
(cm2)
Max. CylinderCapacity
(kN)
ModelNumber
Oil Capacity
(cm3)
PushPush PushPullPull Pull
F For full features see previous page.
254305209368156334511156333168333460571563338151523304576109141219153305457609915121915230545761091412191533054576099151219
Ext. Height
B(mm)
Coll.Height
A(mm)
OutsideDia.
D(mm)
2 mounting holes for RR-5020 only.
4 mounting holes for 95 ton, 140 ton (except RR-1502, 15032),200 ton, 325 ton, 440 ton and 520 ton.
Base mounting hole location isfor reference only, as it is affectedby assembly.
RR-1010 to RR-3014 models
RR-506 to RR-50048 models
1011012952954984984987187189339339331386138613861386199519951995199519951995320132013201320132013201429242924292429242924292510851085108510851085108
33335353
103103103156156435435435668668668668
101710171017101710171017170317031703170317031703229722972297229722972297283828382838283828382838
14,514,542,142,171,271,271,2
102,6102,6133,3133,3133,3198,1198,1198,1198,1285,0285,0285,0285,0285,0285,0457,3457,3457,3457,3457,3457,3613,1613,1613,1613,1613,1613,1729,7729,7729,7729,7729,7729,7
4,84,8
19,119,121,521,521,531,431,462,262,262,295,495,495,495,4
145,3145,3145,3145,3145,3145,3243,2243,2243,2243,2243,2243,2328,1328,1328,1328,1328,1328,1405,4405,4405,4405,4405,4405,4
368442879
154911112378363816013417223844396132112930906597
1614543329405
130251738526049347416997
13947208892785041843557459319
1870028018374005603774737111642225633347444406676888951
122147400703335718
1099490
1046104520712861544
1488317777752209479566408863
132801771237217418
111141481122253296464987
10007149952001429988399966203
1236518526246893697349418
409457387549331509733347525357524687196385582
1116430608765917
12221527485638790943
12471552538690843995
13001605577730882
103513391644
663762596917487843
1244503858525857
1147253541915
1931582938
1222152721362746638943
1247155221622771690995
1300160522142824730
10351339164422542863
7373
101101127127127146146177177177203203203203247247247247247247311311311311311311358358358358358358397397397397397397
* For RR-1010 and RR-1012: N = 32 mm; for RR-308 and RR-3014: N = 55 mm.
Cylinder retract capacity forcertain RR cylinders may beless than theoretical values,as a result of reduced reliefvalve pressure settings.
29®
Double-Acting Cylinders
RR-1010*RR-1012*RR-308*RR-3014*RR-506RR-5013RR-5020RR-756RR-7513RR-1006RR-10013RR-10018RR-1502RR-1506RR-15013RR-15032RR-2006RR-20013RR-20018RR-20024RR-20036RR-20048RR-3006RR-30012RR-30018RR-30024RR-30036RR-30048RR-4006RR-40012RR-40018RR-40024RR-40036RR-40048RR-5006RR-50012RR-50018RR-50024RR-50036RR-50048
Cyl.BoreDia.
E(mm)
Plgr.Dia.
F(mm)
Base to Adv.
PortH
(mm)
Top toRet. Port
I(mm)
SaddleDia.
J(mm)
Weight
(kg)
PlungerThreadLength
P(mm)
SaddleProtr.
fr. Plgr. K
(mm)
PlungerInternal Thread
O
Base Mounting Holes ModelNumber
CollarThread
W
CollarThreadLength
X(mm)
Thread
V
Thd. Depth
Z(mm)
Bolt C.Dia.U
(mm)
RRSeries
Capacity:
10-520 tonStroke:
57-1219 mmMaximum Operating Pressure:
700 bar
42,942,973,273,295,295,295,2
114,3114,3130,3130,3130,3158,8158,8158,8158,8190,5190,5190,5190,5190,5190,5241,3241,3241,3241,3241,3241,3279,4279,4279,4279,4279,4279,4304,8304,8304,8304,8304,8304,8
35,135,154,154,179,579,579,595,295,295,295,295,2
114,3114,3114,3114,3133,4133,4133,4133,4133,4133,4165,1165,1165,1165,1165,1165,1190,5190,5190,5190,5190,5190,5203,2203,2203,2203,2203,2203,2
36363639282857303038384122494976575785858585888888888888
108108108108108108120120120120120120
575781817676767681717192668484889696
101101101101114114114114114114133133133133133133152152152152152152
35355050717171717176767695959595
133133133133133133165165165165165165190190190190190190203203203203203203
1110102226633315151515222222222222282828282828282828282828282828282828
1"- 81"- 8
11/2"- 1611/2"- 161"- 121"- 121"- 121"- 121"- 12
13/4"- 1213/4"- 1213/4"- 12
– 33/8"- 1633/8"- 1633/8"- 16
– 21/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 1221/2"- 123"- 123"- 123"- 123"- 123"- 123"- 12
31/4"- 1231/4"- 1231/4"- 1231/4"- 1231/4"- 1231/4"- 12
252525252525253838353535–
353535–
6363636363828282828282959595959595
108108108108108108
–– – – – –
76– –
139139139
– 158158
– 127127127127127127158158158158158158203203203203203203203203203203203203
– – – – – –
1/2"- 13– –
3/4"- 103/4"- 103/4"- 10
– 3/4"- 163/4"- 16
– 1"- 81"- 81"- 81"- 81"- 81"- 8
11/4"- 711/4"- 711/4"- 711/4"- 711/4"- 711/4"- 711/2"- 611/2"- 611/2"- 611/2"- 611/2"- 611/2"- 613/4"- 513/4"- 513/4"- 513/4"- 513/4"- 513/4"- 5
– – – – – –
25– –
252525–
2828–
252525252525444444444444505050505050575757575757
21/4"- 1421/4"- 1435/16"- 1235/16"- 12
5"- 125"- 125"- 12
53/4"- 1253/4"- 1267/8"- 1267/8"- 1267/8"- 12
– 8"- 128"- 128"- 12
– 93/4"- 1293/4"- 1293/4"- 1293/4"- 1293/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12121/4"- 12141/8"- 8141/8"- 8141/8"- 8141/8"- 8141/8"- 8141/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8155/8"- 8
262649494444443838505050–
555555–
5454545454585858585858656565656565797979797979
1214182930526841686193
1174993
124238147199204279383483200312385469628780303399453597792980432589680816
10021224
Couplers Included!
CR-400 couplers included on all models.Fits all HC-Serieshoses.
CLS-Series, High Tonnage Cylinders
The Single-ActingHeavy LiftingSolution
30
®
Hydraulic Technology Worldwide
H Shown from left to right: CLS-1002, CLS-506, CLS-502
• Single-acting, load return• Special synthetic coating for improved corrosion resistan-
ce and lower friction for smoother operation• Withstands sideload forces up to 5% of rated cylinder
capacity without scoring • Overflow port functions as a stroke limiter• Interchangeable, hardened grooved saddles are standard• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending
cylinder life
Saddles
All CLS cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional
tilt saddles, see selection chart.
Page: 33
Heavy Lifting
For heavy lifting in remotelocations use the EnerpacAtlas gasoline poweredpump with an extended highflow performance.
Page: 90
H CLS-cylinders doing their job, synchronised lifting a complete fly-over for exact positioning.
Gauges
Minimize the risk of overloa-ding and ensure long, dependable servicefrom your equipment. Refer
to the System Components Section for afull range of gauges.
Page: 112
Low Height - High Tonnage
When low height with highforce is required, PancakeCylinders with locknut offerthe solution to lift the firstfew centimetres.
Page: 14
Lifting an Unbalanced Load?
See our ‘Yellow Pages’ for multi-cylinder set-ups.
Page: 98
31®
Single-Acting, High Tonnage Cylinders
CLS-502CLS-504CLS-506CLS-508CLS-5010CLS-5012CLS-1002CLS-1004CLS-1006CLS-1008CLS-10010CLS-10012CLS-1502CLS-1504CLS-1506CLS-1508CLS-15010CLS-15012CLS-2002CLS-2006CLS-20010CLS-2502CLS-2506CLS-25010CLS-3002CLS-3006CLS-30010CLS-4002CLS-4006CLS-40010CLS-5002CLS-5006CLS-50010CLS-6002CLS-6006CLS-60010CLS-8002CLS-8006CLS-80010CLS-10002CLS-10006CLS-100010
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
CylinderCapacity
ton(kN)
ModelNumber
Oil Capacity
(cm3)
CollapsedHeight
(mm)
Weight
(kg)
CLSSeries
Capacity:
50-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 bar
H QUICK SELECTION CHARTFor complete technical information see next page.
Optional features
To add optional features to your cylinders, add the following suffixes to the end of the model number.
Example:•For standard CLS-5006 cylinder,
order: CLS-5006•For CLS-5006 cylinder with spring
return, order: CLS-5006 E001
Technical specifications for these features are available from Enerpac.
Spring return E001Base: no synthetic coating E009Base & plunger: no synthetic coating E011Without plunger wiper seal E012
1418232833382432404958664355698295
10866
10113690
137184137198258200275352289390489350465582549709870729921
1113
355709106414181773212766413271991265433183981993198629793972496559581330398966481832549691602281684311405280083991399836561096718278427712830213835882176452940873292198636643
70,970,970,970,970,970,9132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
Cylinder Effective
Area
(cm2)
Stroke
(mm)
5010015020025030050
10015020025030050
10015020025030050
15025050
15025050
15025050
15025050
15025050
15025050
15025050
150250
128178228278327378143193243293342392165214264315365414193293392193293392235335435264365465294395495309410510354454555385484585
Higher Capacities
1500 and 2000 ton modelsare available on request.
Additional Stroke Lengths
Models above 150 ton are also available with standard stroke lengths of 100, 200 and 300 mm. Please contactEnerpac for ordering information.
CLS-Series, High Tonnage Cylinders
32
®
Hydraulic Technology Worldwide
CLS-502CLS-504CLS-506CLS-508CLS-5010CLS-5012CLS-1002CLS-1004CLS-1006CLS-1008CLS-10010CLS-10012CLS-1502CLS-1504CLS-1506CLS-1508CLS-15010CLS-15012CLS-2002CLS-2006CLS-20010CLS-2502CLS-2506CLS-25010CLS-3002CLS-3006CLS-30010CLS-4002CLS-4006CLS-40010CLS-5002CLS-5006CLS-50010CLS-6002CLS-6006CLS-60010CLS-8002CLS-8006CLS-80010CLS-10002CLS-10006CLS-100010
355709
1064141817732127664
13271991265433183981993
1986297939724965595813303989664818325496916022816843
1140528008399
139983656
10967182784277
12830213835882
17645294087329
2198636643
70,970,970,970,970,970,9
132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
5010015020025030050100150200250300501001502002503005015025050150250501502505015025050150250501502505015025050150250
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
CylinderCapacity
ton(kN)
Cylinder Effective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
F For full features see previous page.
H
J K
B
A
L
F
D
E3/8"-18NPT
H
J K
B
A
L
F
D
30°
E3/8"-18NPT
CLS-300 to CLS-1000 models
CLS-50 to CLS-250 models
Stroke
(mm)
Couplers Included!
CR-400 couplers included on all models.Fits all HC-Serieshoses.
33®
Single-Acting, High Tonnage Cylinders
128178228278328378143193243293343393165215265315365415193293393193293393235335435265365465295395495310410510355455555385485585
178278378478578678193293392493593693215315415515615715243443643243443643285485685315515715345545745360560760405605805435635835
125125125125125125165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560
95,095,095,095,095,095,0130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1
95,095,095,095,095,095,0130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1
303030303030303030303030393939393939505050505050595959707070808080858585
100100100110110110
717171717171717171717171130130130130130130130130130150150150139139139159159159179179179194194194224224224249249249
333333333333222222222222555555555555555555
121212121212121212121212252525252525252525252525252525252525252525252525252525252525
1418232833382432404958664355698295
10866
10113690
137184137198258200275352289390489350465582549709870729921
1113
CLS-502CLS-504CLS-506CLS-508CLS-5010CLS-5012CLS-1002CLS-1004CLS-1006CLS-1008CLS-10010CLS-10012CLS-1502CLS-1504CLS-1506CLS-1508CLS-15010CLS-15012CLS-2002CLS-2006CLS-20010CLS-2502CLS-2506CLS-25010CLS-3002CLS-3006CLS-30010CLS-4002CLS-4006CLS-40010CLS-5002CLS-5006CLS-50010CLS-6002CLS-6006CLS-60010CLS-8002CLS-8006CLS-80010CLS-10002CLS-10006CLS-100010
ModelNumber
Weight
(kg)
ExtendedHeight
B(mm)
CylinderBore Dia.
E(mm)
PlungerDia.
F(mm)
Base toAdv. Port
H(mm)
CollapsedHeight
A(mm)
OutsideDia.
D(mm)
* Optional Tilt SaddleDepth ofPlunger
HoleL
(mm)
Saddle Protr.
from Plgr.K
(mm)
Saddle Height
K1(mm)
Saddle Model Number
StandardSaddle
Dia.J
(mm)
SaddleDia.J1
(mm)
K1
J10-5˚
Optional Tilt Saddle *CLSSeries
Capacity:
50-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 bar
717171717171717171717171
130130130130130130130130130150150150195195195225225225250250250275275275320320320360360360
242424242424242424242424202020202020202020212121757575858585919191969696
123123123136136136
CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800
CAT-1000CAT-1000CAT-1000
CLR-Series, High Tonnage Cylinders
34
®
Hydraulic Technology Worldwide
H Shown from left to right: CLR-5006, CLR-100010, CLR-1006
H Three CLR cylinders laid in parallel push a pre-fabricated road underpass into posi-tion in a series of staged pushes.
Double-Acting Power Lifters
• Double-acting, hydraulic return• Safety valve in retract side of cylinder helps to prevent
damage in case of accidental over-pressurization• Special bearing design withstands sideload forces up to
5% of rated cylinder capacity• Interchangeable, hardened grooved saddles are standard• Baked enamel finish for increased corrosion resistance• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending
cylinder life Gauges
Minimize the risk of overloading and ensure long,dependable service fromyour equipment. Refer to the
System Components Section for a fullrange of gauges.
Page: 105
H Replacing adjustment rolls under a fly-overwith CLR cylinders, for controlled lifting andlowering.
Saddles
All CLR cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional
tilt saddles, see selection chart.
Page: 37
Safety Device
A pilot-operated check valve(V-42) can be insertedbetween cylinder and pump.This valve provides a safety
lock on the cylinder under load at anyposition and remote control for unlocking.
Page: 124
Low Height - High Tonnage
When low height with highforce is required, PancakeCylinders with locknut offerthe solution to lift the firstfew centimetres.
Page: 14
35®
Double-Acting, High Tonnage Cylinders
CLR-1002CLR-1004CLR-1006CLR-1008CLR-10010CLR-10012CLR-1502CLR-1504CLR-1506CLR-1508CLR-15010CLR-15012CLR-2002CLR-2006CLR-20010CLR-2502CLR-2506CLR-25010CLR-3002CLR-3006CLR-30010CLR-4002CLR-4006CLR-40010CLR-5002CLR-5006CLR-50010CLR-6002CLR-6006CLR-60010CLR-8002CLR-8006CLR-80010CLR-10002CLR-10006CLR-100010
132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,81176,91176,91176,91466,41466,41466,4
5010015020025030050
10015020025030050
15025050
15025050
15025050
15025050
15025050
15025050
15025050
150250
61,961,961,961,961,961,996,596,596,596,596,596,5126,5126,5126,5152,0152,0152,0151,1151,1151,1193,8193,8193,8248,4248,4248,4294,9294,9294,9387,7387,7387,7542,9542,9542,9
66413271991265433183981993
198629793972496559581328398466401831549291532281684311405280083991399836561096718278427412822213705885176542942373322199636660
310619929
123815481857483965
1448193024132895633
18983163760
22803800756
22673778969
2907484512423726621014754424737319395816969327158144
13573
172222272322372421192242292342391442210310410237337436350450549380480579424525625445545644495595694534635735
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10265)
Stroke
(mm)
CylinderClass
ton(kN)
Cylinder Effective Area
(cm2)
OilCapacity
(cm3)
ModelNumber
Push Pull Push Pull
CollapsedHeight
(mm)
CLRSeries
Capacity:
100-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 bar
RR-series
For loads below 100 tonEnerpac RR-cylinders are agood alternative.
Page: 26
Optional features
To add optional features toyour cylinders, add the following suffixes to the endof the model number.
Example:•For CLR-5006 cylinder with collar
threads and plunger threads, order:CLR-5006 E005
Technical specifications for these features are available from Enerpac.
Collar threads E002Plunger threads E003Base mounting holes E004Collar+plunger threads E005Collar threads+base mounting holes E006Plunger threads+base mounting holes E007Collar+plunger threads E008+base mounting holesWithout plunger wiper seal E012
H QUICK SELECTION CHARTFor complete technical information see next page.
Higher Capacities
1500 and 2000 ton modelsare available on request.
Additional Stroke Lengths
Models above 150 ton are also available with standard stroke lengths of 100, 200 and 300 mm. Please contactEnerpac for ordering information.
Pump Selection
A double-actingcylinder must be
powered by a pump with a 4-way valve.
Page: 53
36
®
Hydraulic Technology WorldwideCLR-Series, High Tonnage Cylinders
CLR-1002CLR-1004CLR-1006CLR-1008CLR-10010CLR-10012CLR-1502CLR-1504CLR-1506CLR-1508CLR-15010CLR-15012CLR-2002CLR-2006CLR-20010CLR-2502CLR-2506CLR-25010CLR-3002CLR-3006CLR-30010CLR-4002CLR-4006CLR-40010CLR-5002CLR-5006CLR-50010CLR-6002CLR-6006CLR-60010CLR-8002CLR-8006CLR-80010CLR-10002CLR-10006CLR-100010
100
150
200
250
300
400
500
600
800
1000
Stroke
(mm)
CylinderCapacity
(ton)
Cylinder Effective
Area(cm2)
MaximumCylinderCapacity
(kN)
ModelNumber
OilCapacity
(cm3)
F For full features see previous page.
H
I
J K
B
A
L
F
D
E
3/8"-18NPT
30°
H
I
J K
B
A
F
D
L
E
3/8"-18NPT
30°
CLR-100 to CLR-250 models
CLR-300 to CLR-1000 models
Push Pull Push Pull Push Pull
50100150200250300501001502002503005015025050150250501502505015025050150250501502505015025050150250
132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
929929929929929929
139013901390139013901390185918591859256225622562319331933193391939193919511851185118598359835983823882388238
102651026510265
433433433433433433675675675675675675885885885
106410641064105710571057135713571357173917391739206420642064271427142714380138013801
61,961,961,961,961,961,996,596,596,596,596,596,5
126,5126,5126,5152,0152,0152,0151,1151,1151,1193,8193,8193,8248,4248,4248,4294,9294,9294,9387,7387,7387,7542,9542,9542,9
66413271991265433183981993
1986297939724965595813283984664018315492915322816843
1140528008399
139983656
10967182784274
12822213705885
17654294237332
2199636660
310619929
123815481857483965
1448193024132895633
18983163760
22803800756
22673778969
2907484512423726621014754424737319395816969327158144
13573
Speed Chart
See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.
Page: 103
Couplers Included!
CR-400 couplers included onall models.Fits all HC-Series hoses.
37®
Double-Acting, High Tonnage Cylinders
CLR-1002CLR-1004CLR-1006CLR-1008CLR-10010CLR-10012CLR-1502CLR-1504CLR-1506CLR-1508CLR-15010CLR-15012CLR-2002CLR-2006CLR-20010CLR-2502CLR-2506CLR-25010CLR-3002CLR-3006CLR-30010CLR-4002CLR-4006CLR-40010CLR-5002CLR-5006CLR-50010CLR-6002CLR-6006CLR-60010CLR-8002CLR-8006CLR-80010CLR-10002CLR-10006CLR-100010
ModelNumber
Weight
(kg)
Extend.Height
B(mm)
Cyl. Bore Dia.
E(mm)
PlungerDia.
F(mm)
Base to Advance
PortH
(mm)
Collaps.Height
A(mm)
OutsideDia.
D(mm)
Optional Tilt Saddle *SaddleProtr.
from Plgr.K
(mm)
StandardSaddle
Dia.J
(mm)
SaddleHeight
K1(mm)
Saddle ModelNumber
Top toRetract
PortI
(mm)
Saddle Dia.J1
(mm)
Depth ofPlunger
HoleL
(mm)
CLRSeries
Capacity:
100-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 barK1
J10-5˚
* Optional Tilt Saddle
CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-150CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800
CAT-1000CAT-1000CAT-1000
242424242424202020202020202020212121757575858585919191969696
123123123136136136
717171717171
100100100100100100100100100150150150195195195225225225250250250275275275320320320360360360
2733374450574757677787976792
117105141176204252299281342405411493575494586678759885
1019101211681325
131313131313252525252525252525252525252525252525252525252525252525252525
222222222222222222555555555555555555
717171717171100100100100100100100100100150150150139139139159159159179179179194194194224224224249249249
646464646464696969696969808080919191137137137148148148167167167173173173188188188198198198
303030303030393939393939505050595959595959707070808080858585100100100110110110
95,095,095,095,095,095,0114,0114,0114,0114,0114,0114,0133,1133,1133,1165,1165,1165,1197,1197,1197,1215,9215,9215,9247,9247,9247,9267,0267,0267,0317,0317,0317,0342,9342,9342,9
130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0183,9183,9183,9215,9215,9215,9241,0241,0241,0267,0267,0267,0305,1305,1305,1329,9329,9329,9387,1387,1387,1432,1432,1432,1
165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560
222322422522622722242342442542642742260460660287487687400600800430630830475675875495695895545745945585785985
172222272322372422192242292342392442210310410237337437350450550380480580425525625445545645495595695535635735
CLL-Series, Lock Nut Cylinders
38
®
Hydraulic Technology Worldwide
H For this curved bridge, CLL-cylinders were used to support the concrete beams, tolevel the pierhead and to place 4000 ton slide bearings between pier and pierhead.
H CLL cylinder, mechanically locked, after posi-tioning the curved bridge.
H Shown from left to right: CLL-5010, CLL-502, CLL-1006
• Single-acting, load return• Safety Lock Nut for mechanical load holding• Special synthetic coating for improved corrosion resistan-
ce and lower friction for smoother operation• Withstands sideload forces up to 5% of rated cylinder
capacity without scoring• Overflow port functions as a stroke limiter• Interchangeable, hardened grooved saddles are standard• Plunger wiper reduces contamination, extending
cylinder life
To Secure LoadsMechanically
Saddles
All CLL cylinders are equip-ped with bolt-on removablegrooved saddles. For information on optional
tilt saddles, see selection chart at next page.
Page: 41
Gauges
Minimize the risk of overloa-ding and ensure long, dependable servicefrom your equipment. Refer
to the System Components Section for afull range of gauges.
Page: 105
Low Height - High Tonnage
When low height with highforce is required, PancakeCylinders with locknut offerthe solution to lift the firstfew centimetres.
Page: 14
39®
Single-Acting, Lock Nut Cylinders
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20010CLL-2502CLL-2506CLL-25010CLL-3002CLL-3006CLL-30010CLL-4002CLL-4006CLL-40010CLL-5002CLL-5006CLL-50010CLL-6002CLL-6006CLL-60010CLL-8002CLL-8006CLL-80010CLL-10002CLL-10006CLL-100010
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
Stroke
(mm)
CylinderCapacity
ton(kN)
Cylinder Effective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
Collapsed Height
(mm)
Weight
(kg)
CLLSeries
Capacity:
50-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 bar
H QUICK SELECTION CHARTFor complete technical information see next page.
Optional features
To add optional features toyour cylinders, add the following suffixes to the endof the model number.
Example:•For standard CLL-5006 cylinder,
order: CLL-5006•For CLL-5006 cylinder with spring
return, order: CLL-5006 E001
Technical specifications for these features are available from Enerpac.
Spring return E001Base: no synthetic coating E009Base & plunger: no syntheticcoating E011Without plunger wiper seal E012
15202530354030394856647353667892
10411783
117152116162210173233293250327402367466567446562679709870
1029949
11411333
355709106414181773212766413271991265433183981993198629793972496559581330398966481832549691602281684311405280083991399836531095918265427712830213835882176452940873292198636643
70,970,970,970,970,970,9132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
5010015020025030050
10015020025030050
10015020025030050
15025050
15025050
15025050
15025050
15025050
15025050
15025050
150250
164214264314364414187237287337387437209259309359409459243343443249349449295395495335435535375475575395495595455555655495595695
Higher Capacities
1500 and 2000 ton modelsare available on request.
Additional Stroke Lengths
Models above 150 ton are also availablewith standard stroke lengths of 100, 200and 300 mm. Please contact Enerpac forordering information.
CLL-Series, Lock Nut Cylinders
40
®
Hydraulic Technology Worldwide
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20010CLL-2502CLL-2506CLL-25010CLL-3002CLL-3006CLL-30010CLL-4002CLL-4006CLL-40010CLL-5002CLL-5006CLL-50010CLL-6002CLL-6006CLL-60010CLL-8002CLL-8006CLL-80010CLL-10002CLL-10006CLL-100010
50(496)
100(929)
150(1390)
200(1859)
250(2562)
300(3193)
400(3919)
500(5118)
600(5983)
800(8238)
1000(10260)
Stroke
(mm)
CylinderCapacity
ton(kN)
Cylinder Effective
Area
(cm2)
ModelNumber
Oil Capacity
(cm3)
F For full features see previous page.
H
S
J K
B
A
L
F
D
E
3/8"-18NPT
H
S
J K
B
A
L
F
D
E
30°
3/8"-18NPT
CLL-300 to CLL-1000 models
CLL-50 to CLL-250 models
70,970,970,970,970,970,9
132,7132,7132,7132,7132,7132,7198,6198,6198,6198,6198,6198,6265,6265,6265,6366,1366,1366,1456,2456,2456,2559,9559,9559,9731,1731,1731,1854,8854,8854,8
1176,91176,91176,91466,41466,41466,4
501001502002503005010015020025030050100150200250300501502505015025050150250501502505015025050150250505025050150250
355709
1064141817732127664
13271991265433183981993
1986297939724965595813303989664818325496916022816843
1140528008399
139983653
10959182654277
12830213835882
17645294087329
2198636643
Couplers Included!
CR-400 couplers included onall models.Fits all HC-Series hoses.
41
Single-Acting, Lock Nut Cylinders
®
CLL-502CLL-504CLL-506CLL-508CLL-5010CLL-5012CLL-1002CLL-1004CLL-1006CLL-1008CLL-10010CLL-10012CLL-1502CLL-1504CLL-1506CLL-1508CLL-15010CLL-15012CLL-2002CLL-2006CLL-20010CLL-2502CLL-2506CLL-25010CLL-3002CLL-3006CLL-30010CLL-4002CLL-4006CLL-40010CLL-5002CLL-5006CLL-50010CLL-6002CLL-6006CLL-60010CLL-8002CLL-8006CLL-80010CLL-10002CLL-10006CLL-100010
ModelNumber
Weight
(kg)
Ext. Height
B(mm)
Cyl.Bore Dia.
E(mm)
PlungerDia.
(threaded)F
(mm)
Base toAdv. Port
H(mm)
Coll.Height
A(mm)
Outs. Dia.
D(mm)
* Optional Tilt SaddleDepth ofPlunger
HoleL
(mm)
Saddle Protr.
from Plgr.K
(mm)
Saddle Height
K1(mm)
Saddle ModelNumber
StandardSaddle
Dia.J
(mm)
Saddle Dia.J1
(mm)
Lock-nut
HeightS
(mm)
CLLSeries
K1
J10-5˚
Optional Tilt Saddle *
717171717171717171717171
130130130130130130130130130150150150195195195225225225250250250275275275320320320360360360
15202530354030394856647353667892
10411783
117152116162210173233293250327402367466567446562679709870
1029949
11411333
363636363636444444444444444444444444505050565656606060707070808080858585
100100100110110110
242424242424242424242424202020202020202020212121757575858585919191969696
123123123136136136
CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-100CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-200CAT-250CAT-250CAT-250CAT-300CAT-300CAT-300CAT-400CAT-400CAT-400CAT-500CAT-500CAT-500CAT-600CAT-600CAT-600CAT-800CAT-800CAT-800
CAT-1000CAT-1000CAT-1000
303030303030303030303030393939393939505050505050595959707070808080858585100100100110110110
Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4Tr 95 x 4
Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 130 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 159 x 6Tr 184 x 6Tr 184 x 6Tr 184 x 6Tr 216 x 6Tr 216 x 6Tr 216 x 6Tr 241 x 6Tr 241 x 6Tr 241 x 6Tr 266 x 6Tr 266 x 6Tr 266 x 6Tr 305 x 6Tr 305 x 6Tr 305 x 6Tr 330 x 6Tr 330 x 6Tr 330 x 6Tr 387 x 6Tr 387 x 6Tr 387 x 6Tr 432 x 6Tr 432 x 6Tr 432 x 6
717171717171717171717171130130130130130130130130130150150150139139139159159159179179179194194194224224224249249249
333333333333222222222222555555555555555555
121212121212121212121212252525252525252525252525252525252525252525252525252525252525
125125125125125125165165165165165165205205205205205205235235235275275275310310310350350350400400400430430430505505505560560560
214314414514614714237337437537637737259359459559659759293493693299499699345545745385585785425625825445645845505705905545745945
164214264314364414187237287337387437209259309359409459243343443249349449295395495335435535375475575395495595455555655495595695
95,095,095,095,095,095,0
130,0130,0130,0130,0130,0130,0159,0159,0159,0159,0159,0159,0184,0184,0184,0216,0216,0216,0241,0241,0241,0267,0267,0267,0305,0305,0305,0330,0330,0330,0387,0387,0387,0432,0432,0432,0
Capacity:
50-1000 tonStroke:
50-300 mmMaximum Operating Pressure:
700 bar
Synchronized Lift & Lowering Systems
42
• Digital technology controls automatic synchronization ofup to 8 cylinders, parallel set-ups allow for even more lif-ting points
• Can effectively and efficiently be operated by one person,computer control offers all features at a friendly interface
• High accuracy (+/- 1 mm) sensors are attached to the loadto ensure accurate positional control
• Utilizes standard hydraulic components, allowing use ofyour present equipment
ComputerControlled Lifting &Lowering Systems:
A Marriage betweenHydraulics andElectronics
H Positioning of two enormous vessels, using a combination of stage and synchronized lifting in Malaysia.
Split Flow Pumps
For applications that do notrequire the high accuracy ofelectronic synchronouslifting, a split flow pump may
provide the cost effective solution.
Page: 80
F Split-flowpump dia-gram
F Here a bridge deck is being re-leveled aftermajor maintenance work.
H Even positioning and leveling large machiningcenters benefits from synchronized techniques.
®
Hydraulic Technology Worldwide
®
a
d
b
c g
e
f
h
Applications that mayrequire synchronous con-trol:
•Bridge lifting•Lifting and lowering of
heavy equipment•Shiplifts•Die separation•Structural testing•Lifting and weight
measuring of oil platforms•Synchronized pressing•Horizontal load shifting
The possible applications of thesystem are to numerous to show inthis catalog. Synchronized lifting,lowering and positioning usingcomputer technology and highpressure hydraulics has becomepopular in many industries aroundthe globe. Basically the lifting orlowering capacity of the system isunlimited. By adding more or largerhydraulic cylinders to the setup, thesystem will allow jobs of 50.000 tonor even more.
Synchronized Lifting & Lowering Systems
43®
SLSeries
•Split Flow pumps equip-ped with solenoid valvesprovide directional controlof lifting cylinders
•Sensors at each liftingpoint send data to thecontrol device
•Best choice for heavy lif-ting jobs: RR- or CLR-Series,Double-Acting cylinders
Both cylinder seriesfeature built-in safetyvalve and baked enamelanti-corrosion finish
PowerSource
ElectronicSensors
& Cylinders
•Microprocessor basedcontrol unit or personalcomputer with user-friendly interface
•Receives data fromelectronic sensors, loca-ted at each lifting point
•Distributes output con-trol signals from control-ler to cylinder controlvalves
ControlDevices
H TYPICAL SYSTEM COMPONENTS
Call Enerpac!
Contact your distributor or theEnerpac office nearest to you for
advice and technical assistance in thelayout of your ideal Synchronous Lifting& Lowering System.
a Hydraulic Cylinder
b Electronic sensor
c Valve
d Pump Unit
e Personal computer
f Electronic cables
g Hydraulic hoses
h Valves
5095
140200
155168155155
498933
13861859
103435668885
Lifting Capacity
(ton)
Stroke
(mm)
Maximum Cylinder Capacity
(kN)
Push Pull
Model Number
BLS-Series, Stage-Lift Cylinders
44
• Double-acting cylinder with solid plunger design• Simple three-stage operation• Swivel saddle and large support attachments for stability• Anti-rotation device• Built-in overload protection
H Shown: BLS-506 in three lifting positions.
Split Flow Pumps
Multi-cylinder arrangementscan be powered and fullysynchronised by Enerpacsplit-flow pumps.
Page: 80
H Typical stage-lift application using a custombuilt Enerpac system to lift this pressure vessel.
The Most SimpleSolution to HigherLifting Jobs
To avoid overload situ-ations, cylinders shouldbe used within 80% oftheir maximum capacity.
80%max
Lifting height
Stage-lift cylinders overcome the usual limitation of lift height
imposed by the cylinder’s plunger stroke length. Large objects, such as oil tanks, can belifted, held and lowered for maintenancewithout sending for a crane.
BLS-506BLS-1006BLS-1506BLS-2006
®
Hydraulic Technology Worldwide
Model NumberCylinder Effective Area
(cm2)
Oil Capacity
(cm3)
A
408448472512
B
563616624664
C
322346370392
D
127175203248
F
79105114133
H
577694
102
I
36233937
J
5071
130130
J1
240320230270
K
515670475550
170231322373
Weight
(kg)Push Pull Push Pull
71,2133,3198,1265,6
21,562,295,4
126,5
1111223830903984
335104514881898
Dimensions (mm)
BLS-506BLS-1006BLS-1506BLS-2006
Double-Acting, Stage-Lift Cylinders
45®
BLSSeries
Capacity:
50-200 tonStroke:
155-168 mmMaximum Operating Pressure:
700 bar
1 The Stage Lift cylinder is placed ona solid support under the load(retracted plunger).
2 Plunger extends, lifting the load andgiving clearance to insert two outerblocks under the spreading plate.
3 Plunger retracts, giving clearance toposition the central blocks whichwill support the plunger plate for thenext extension.
4 Plunger extends, lifting the load andgiving clearance to insert two newblocks, placed crosswise under thespreading plate.
* Support blocksare not suppliedby Enerpac.
5095
140200
565720500575
140150140140
120160115135
Azobe WoodAzobe Wood
Solid AluminiumSolid Aluminium
For Lifting Capacity
(ton)
Block Dimensions (mm)
Support Block Material *
KJ1L
J1K
0-5°
J
A
C
B
H
I
M
N
3/8"-18NPT
D
F
L M N
46
®
Hydraulic Technology Worldwide
ST-132132(1174)
300 12
RequiredStrandsat Full
Capacity
(not included)*
System Pressure
at FullCapacity
(bar)
Lifting Capacity
ton (kN)
ModelNumber
* System uses 15 mm diameter 270 Grade pre-stressing strand.
ST-Serie, Strand Lift System
• 132 ton capacity per cluster, capacity can be increased byusing more clusters
• Positive hydraulic seating of strand chucks
• Ideal for lifting or lowering loads over long distances
• Loads can be locked or secured at any stage
• Maximum lifting capability determined by strand capacity(not by hydraulic capacity)
From the Leader inHeavy Lifting Technology
Strand Lift Pump PST-8418
Specifically designed tooperate the ST-132 cluster.One pump can control up tofour clusters.
Providing independent, manual controlof each cluster.
Lifting Eye SLEA-200
Provides the interfacebetween the ST-132 clusterand the load. Includes 12 SC-22 chucks.
Weight: 309 kg
Strand Chucks SC-11
Twenty-four SC-11 chucksare included with the ST-132. Spare chucks canbe purchased under these
numbers.
H To lift a 112 ton boring machine in a deep tunnel project, workers thread strandthrough the ST-132 strand lift cluster. Due to the lift height required and the low ceiling, the ST-132 Strand Lift was the only solution.
Lifting in Unusual Situations
When loads need to be liftedor lowered in tight areas or insituations where overheadclearance is limited, Enerpac
offers this economical alternative to traditional rigging equipment.
H Shown Strand Lift Cluster ST-132
47®
Strand Lift System
STSeries
Rated Capacity per Cluster:
132 tonOperating Pressure at Rated Load:
300 bar
88066014031073
1 cluster 6,72 clusters 5,53 clusters 4,34 clusters 3,1
7210144202163028841
Oil Capacity
(cm3)
Cluster HeightA
Cluster Width
B
Weight
(kg)
Lifting rate(using the
PST-8418 pump)
(m/hr)
A
B
Hoses
To maintain the integrity ofyour system, demand onlygenuine Enerpac safetyhoses. Long lengths
available for strand lift systems.
Page: 106
1 52 3 4
Hydraulic seating cylinder. Activates chucksto lock strand.
Ø 15 mm 270 grade pre-stressing strand,available worldwide, passes through top and bottom plates
Strand chucks
Top plate
Lifting cylinder
Hydraulic seating cylinder. Activates chucksto lock strand
Strand chucks
Bottom plate
Retracted Extended
Dimensions (mm)
Lifting Sequence1 Chucks lock strands in bottom plate2 Chucks lock strands in top plate3 Lifting load with top plate4 Chucks lock strand in bottom plate5 Top plate being retracted to repeat
sequence
ClampedUnclamped
JHA/JTASeries
48
®
Hydraulic Technology WorldwideSaf-T-Lite® Aluminium JacksH Shown from left to right: JHA-356, JHA-73, JTA-76
• All-directional operation on 7, 15 and 35 ton conventional models
• Two-directional operation (vertical and horizontal) on 75 and 150 ton conventional models
• Internal relief valve to prevent overloading• Machined flat front and bottom surfaces permit flush
alignment in tight corners• Includes pumping handle
JHA-73JHA-156JHA-356JHA-756JHA-1506JTA-76JTA-176JTA-356
7 (62)
15 (133)
35 (311)
75 (667)
150 (1335)
7 (62)
17 (151)
35 (311)
Conven-tional Jack
Toe-LiftJack
9,620,345,6102,6197,920,345,6102,6
133247257285327319360422
209401412439482473515576
73 x 15892 x 238
117 x 254174 x 325241 x 40792 x 295
117 x 333174 x 422
30,241,454,1
114,3158,841,454,182,6
SingleSingleSingleSingle
2-SpeedSingleSingleSingle
5,013,218,142,695,326,339,095,3
–––––
505065
76153155153155153155153
Jack Capacity
ton (kN)
ModelNumber
Stroke
(mm)
JackEffective
Area(cm2)
CollapsedHeight
(mm)
ExtendedHeight
(mm)
OutsideDimensions
(L x W)(mm)
PlungerDiameter
(mm)
Toe Height
(mm)
Pump Speed
Weight
(kg)
Style
Capacity:
7-150 tonStroke:
76-155 mmMaximum Operating Pressure:
700 bar
Toe-Lift and Load Skates
See the tool section in thiscatalog for more toe-lifts andload skates for easy trans-portation.
Page: 169
Enerpac high quality aluminium jacks are a great tool for precise positioning
out in the field. E
49®
Premium Steel JacksH Shown from left to right: JH-506, JH-3, JH-5, JHL-1.5, JH-12
JH-1.5JHL-1.5JH-3JHL-3JH-5JH-8JH-12JH-20JH-306JH-506JH-1006
1,5 (13)
3 (26)
5 (44)
8 (71)
12 (106)
20 (178)
30 (267)
50 (445)
100 (890)
131457149508158158130165155154153
4,16,45,9
11,87,78,6
11,819,126,840,874,4
54–
68–
858585––––
190551222668241241225279254260287
92 x 12792 x 127
108 x 139108 x 139122 x 171134 x 196146 x 146134 x 16095 x 242
127 x 258181 x 328
SingleSingleSingleSingleSingleSingleSingleSingleSingle
2-Speed2-Speed
Jack Capacity
ton (kN)
ModelNumber
Stroke
(mm)
Additional Screw
Extension(mm)
CollapsedHeight
(mm)
OutsideDimensions
L x W(mm)
PumpSpeed
Weight
(kg)
Capacity:
1,5-100 tonStroke:
130-508 mmMaximum Operating Pressure:
700 bar
Screw Feature
Heat treated, adjustableextension screw with cleatedsaddle on select JH modelshelps adjusting and prevents slipping.
JH/JHLSeries
Premium Industrial Line• Automatic by-pass port to prevent over-extension • Long stroke versions available (JHL-1.5, JHL-3)• Pump handle included
On 30, 50 and 100 ton models: • Chrome plated plungers• Machined flat front and bottom surfaces permit flush align-
ment in tight corners• Internal relief valve to prevent overloading
H Creativity is the limit with EnerpacAluminium Jacks.
50
®
Hydraulic Technology WorldwideSingle-Acting Cylinder-Pump SetsH Shown cylinder-pump set: SCR-1010H
• Optimum match of individualcomponents
• All sets are ready-for-use• Sets include 1,8 m safety hose,
calibrated gauge with gaugeadaptor
• All hand pumps are two-speed
Single-Acting, General Purpose Cylinders:
For maximum versatility.RC-Series
Single-Acting, Hollow Cylinders:
For pushing and pulling applications.RCH-Series
Single-Acting, Low Height Cylinders:
Ideal where space is restricted.RCS-Series
Pull Cylinders:
For use with subassemblies and modules.BRP-Series
RC-55RC-102RC-106
RC-1010RC-154RC-156RC-252RC-254RC-256
RC-2514RC-506
RC-1006RCS-101RCS-201RCS-302RCS-502
RCS-1002RCH-121RCH-202RCH-302RCH-603
RCH-1003BRP-106CBRP-106LBRP-302BRP-306BRP-606
5 (45)
10 (101)
15 (142)
25 (232)
50 (498)
95 (933)
10 (101)
20 (201)
30 (295)
45 (435)
90 (887)
13 (125)
20 (215)
30 (326)
60 (576)
95 (933)
10 (105)
30 (326)
50 (505)
12754
15625710115250
10215836215916838456260574249647676
15115163
155152
2151212473492002711652152734762823578898
117122141120162178247254587541
10331085719
Set Capacityton (kN)
CollapsedHeight(mm)
Stroke
(mm)
CylinderModel
Number
The Quickest andEasiest Way to StartWorking Right Away
H1 Cylinder Selection (See Cylinder Section of this catalog for full product descriptions)
Page: 18
Page: 20
Page: 16
Speed ChartSee the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.
Page: 103
Page: 8
® 51
Single-Acting Cylinder-Pump Sets
SCR-55H––––––––––––––––
SCH-121H–––––––––
–SCR-102HSCR-106H
SCR-1010HSCR-154HSCR-156HSCR-252HSCR-254HSCR-256H
–––
SCL-101HSCL-201HSCL-302HSCL-502H
––
SCH-202HSCH-302H
––
SCP-106CHSCP-106LHSCP-302H
––
–––––––––
SCR-2514HSCR-506H
–––––
SCL-1002H–––
SCH-603HSCH-1003H
–––
SCP-306HSCP-606H
–––––––––––
SCR-1006H–––––––––––––––
–SCR-102BSCR-106B
SCR-1010BSCR-154BSCR-156BSCR-252BSCR-254BSCR-256B
–––
SCL-101BSCL-201BSCL-302B
–––
SCH-202BSCH-302B
–––––––
–SCR-102ASCR-106A
SCR-1010ASCR-154ASCR-156ASCR-252ASCR-254ASCR-256A
SCR-2514ASCR-506A
–SCL-101ASCL-201ASCL-302ASCL-502A
––
SCH-202ASCH-302ASCH-603A
––––––
HC-7206QHC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HB-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206
Hand Pump
P-142
Hand Pump
P-392
Hand Pump
P-80
Hand Pump
P-462
WalkPac™Battery Pump* PBM-12001E
Turbo Air Pump
PAT-1102N
HoseModel
Number
GP-10SGF-10SGF-10SGF-10SGP-10SGP-10SGF-20SGF-20SGF-20SGF-20SGF-50SGF-871GF-10SGF-230GF-230GF-510GF-510GF-120
GF-813SGF-813SGF-813SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10S
GaugeModel
Number
GA-4GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-4GA-2GA-3GA-2GA-2GA-2GA-2GA-2GA-2GA-2
GaugeAdaptor
Model Nr.
H2 Pump selection (See Pump Section of this catalog for full product descriptions) Accessories included
SELECTION EXAMPLE
Selected cylinder:
• RC-106, Single-Acting cylinder with 156 mm stroke
Selected pump:
•P-392, Light weight hand pump
Set model number:
• SCR-106H
Included:•HC-7206 hose•GF-10S gauge •GA-2 adaptor
SCSeries
Capacity:
5-95 tonStroke:
38-362 mmMaximum Operating Pressure:
700 bar
SET SELECTION:
E1 Select the cylinder
E2 Select the pump
E3 Find the set modelnumber in the bluematrix
* All WalkPac™ sets include HC-7206C hose.
®
Hydraulic Technology Worldwide
1/4"
-18
G1/
4"
315
347
217 13
8
PRES
S
SE
3/8"-18NPTF
254178 8
38
176203
G1/4"
217
138
Enerpac Hydraulic Pumps
ENERPAC hydraulic pumps are
available in over 1000 different
configurations. Whatever your
high-pressure pump needs are, you
will find an Enerpac pump suited
to the application.
Featuring Hand, Battery, Electric,
Air and Gasoline powered models,
plus multiple reservoir and valve
configurations, Enerpac offers the
most comprehensive pump line
available.
�����
�����
�����
�����
�����
�����
�����
�����
�����
�����
���������������������������������������������������������������������������������������������������������
iiiPump SelectionFor help in selecting
the correct pump for your application,
please review our ‘Yellow Pages’.
If you require further assistance,contact the Enerpac office
located near you.Page: 96
52
® 53
15
Hydraulic Pumps Section Overview
2,5
7,4
3,3
1,0
0,6
3,8
40
5,5
40
80
5,0
5,0
40
40
95
2,47
4,75
25,40
2,49
0,16
0,32
0,98
0,27
1,52
8,0
5,0
0,13
1,2
1,64
5,7
Light Weight Hand Pumps
Steel Hand Pumps
High Flow Hand Pumps
Ultra-High Pressure Hand Pumps
WalkPac™Battery Powered Pumps
Economy SeriesCompact and Portable
Titan SeriesHigh Performance, Intermittent Use
Submerged SeriesPowerful and Low-Noise
Hushh, 2000, 3000 and 5000 SeriesThe Industrial Standard
8000- and 9000-SeriesHigh Flow / Split Flow Pumps
Air Hydraulic PumpsThe Maximum Flow Series Air Pump
Turbo and Air Hydraulic PumpsSingle and Twin-Air
Air Pumps - Modular Air SeriesModular Design
Atlas SeriesYour Gasoline Pump Solution
800 SeriesFor the Largest Jobs
54 E
56 E
58 E
60 E
62 E
64 E
66 E
70 E
74 E
80 E
82 E
84 E
88 E
90 E
92 E
P
P
P/PL
P/11
PB
PU
PU
PE
PE
PP
PA
PA
PA
PG
EG
Power Source
MaximumReservoirCapacity
(litres)
Max.Flow at RatedPressure
(l/min)
Pump Types Series Page
Gas
olin
eA
irE
lect
ric
Bat
tery
Han
d
(cm3/stroke)
(cm3/stroke)
(cm3/stroke)
M
M
E
E
E
E
E
E
54
®
Hydraulic Technology WorldwideLight Weight Hand Pumps
• Light weight and compact design• Durable glass-filled nylon reservoir and nylon
encapsulated aluminium pump base for maximum corrosion resistance
• Two-speed operation reduces handle strokes by as much as 78% over single speed pumps
• Lower handle effort to minimize operator fatigue • Integral 4-way valve on P-842 for operation of double-
acting cylinders• Handle lock and light weight construction for easy carrying• Large oil capacities to power a wide range of cylinders
or tools• Non-conductive fiberglass handle for operator safety• Internal pressure relief valve for overload protection
H Pumps shown, from top to bottom: P-802, P-842, P-202, P-142
32790132790190125402540
N/AN/A1313132727
700700700700700700700
Single-Speed
Two-Speed
Usable OilCapacity
(cm3)
PumpType
Pressure Rating**
(bar)
ModelNumber
N/AN/A3,623,62
11,2639,3339,33
0,902,470,900,902,472,472,47
Oil Displacementper Stroke
(cm3)
P-141P-391P-142*P-202P-392*P-802P-842
Exclusively fromEnerpac
32,738,635,428,642,243,143,1
Max.HandleEffort
(kg)
* Available as set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of
pressure rating.
H P-392 in action with RSM-500 cylinders.
Tank Kits:
When a return-to-tank portis required, the Tank Kitsprovide a 7/16”-20 port at therear of the reservoir.
1st stage 1st stage 2nd stage 2nd stage
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
Cylinder Matching Chart
For help in selecting the correcthand pump for your application,
please refer to the Cylinder MatchingChart located in the ‘Yellow Pages’.
Page: 96
PC-20PC-25
Fits P-141, P-142Fits P-202, P-391, P-392
® 55
E
G
PN
J
D A C
M
L
H
38˚ - P-141, P-142, P-20250˚ - P-391, P-392
B
S
E
Q
PN
G
J
D A C
S
L
H
50˚
B
J
D A C
S
L
H
50˚
B
E
PN
Q
G
Light Weight Hand Pumps
PistonStroke
(mm)
Weight
(kg)
336533336509533552552
ModelNumber
P-141P-391P-142*P-202P-392*P-802P-842
28362836364545
8599858599133133
28332828333520
1/4"- 18 NPT
3/8"- 18 NPT
1/4"- 18 NPT
1/4"- 18 NPT
3/8"- 18 NPT
3/8"- 18 NPT
3/8"- 18 NPT
319522319400522527527
19301919305555
143177143144177228228
–16–
1616––
951209595
120120120
80–
80––
152152
7–7––
1010
–––––
3536
185344185344344337337
A B C D E G H J L M N P SQ
12,725,412,712,725,425,425,4
2,04,12,03,44,18,2
10,0
Aluminium Reservoir
For applications wherecomposite reservoirs maynot be suitable, the P-392AL utilizes an extruded
aluminium reservoir. Also included is asecond handle for two-hand use.
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 106
PSeries
Reservoir Capacity:
327-2540 cm3
Flow at Rated Pressure:
0,90-2,47 cm3/strokeOperating Pressure:
700 bar
Dimensions (mm)
Release valve
Valve Control
Release Valve
Pump and Cylinder sets
All Pumps markedwith an * are available
as sets (pump, cylinder, gauge,couplers and hose) for your ordering convenience.
Page: 50
P-141, P-142, P-202, P-391, P-392
P-802
P-842
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
56
®
Hydraulic Technology WorldwideSteel Hand Pumps
• Two-speed operation for reduced operator fatigue (except P-39)
• 4-way valving on the P-84 and P-464 for operation of double-acting cylinders
• External load release valve on remaining models for single-acting cylinder operation
• Internal pressure relief valves for overload protection • Large oil capacities to power a wide range of cylinders
or tools
H Shown from left to right: P-84, P-80, P-462, P-39
N/A2525251414
Two-Speed
Single
Usable OilCapacity
(cm3)
PumpType
Pressure Rating**
(bar)
ModelNumber
N/A16,2216,2216,22
126,20126,20
Oil Displacementper Stroke
(cm3)
P-39P-80*P-801P-84P-462*P-464
504747474949
Max.HandleEffort
(kg)
65522004080220074237423
H In the absense of a power supply, the P-80 HandPump offers a powerful solution.
2,622,462,462,464,754,75
700700700700700700
1st stage 1st stage2nd stage 2nd stage
Steel - The Solutionfor Tough Jobs
Two Speed
Recommended for applicationswhere cylinder plunger must
advance rapidly to load contact, andapplications where greater oil capacitiesare required, such as multiple cylinderhook-ups.
* Available as a set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of
pressure rating.
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
4-Way Control Valve
P-84 and P-464 feature aVM-4 manual 4-way controlvalve, designed for use withone double-acting or two
single-acting cylinders. For system Set-up information:
Page: 98
Foot Pump Conversion Kits
Convert your P-39 to footpower with the PC-10 Kit.Includes instructions foreasy conversion.
® 57
Steel Hand Pumps
L
D A
H
50˚
J
C
3/8"-18NPT
B MF
SP
R
E
N
Q
T
AB
ME
3/8"-18NPT
JH
74˚
PD
N
C S
QR L
PSeries
Reservoir Capacity:
655-7423 cm3
Flow at Rated Pressure:
2,46-4,75 cm3/strokeMaximum Operating Pressure:
700 bar
P-39P-80*P-801P-84P-462*P-464
PistonStroke
(mm)
Weight
(kg)
520539782539308308
ModelNumber
33252525
163163
38444444320320
325454–
195195
302929292525
133146146146650650
–––
64––
464527772527671671
119174174174270270
6519–
19175175
–1211211219292
–––
38–
89
–212143–
68
–888
8080
–676767––
393425659425210210
A B C D E F H J L M N P Q R S T
5,910,914,113,227,727,7
20,625,425,425,438,138,1
Dimensions (mm)
P-80, P-801, P-84
P-462, P-464
Pump and Cylinder sets
P-80 and P-462also available as set
(pump, cylinder, gauge,couplers and hose) for your ordering convenience.
Page: 50
Cylinder Matching Chart
For help in selecting the correcthand pump for your application,
please refer to the Cylinder MatchingChart located in the ‘Yellow Pages’.
Page: 96
P-84 only
P-39
E
NAD C
B M
L
40˚
HJ
3/8"-18NPT
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
58
®
Hydraulic Technology Worldwide
P-series• Bi-directional pumping on the P-25 and P-50 allows
operation on both handle strokes• External load-release valve • Internal pressure-relief valve for overload protection
PL-series• Pump available with reservoir or without reservoir for
flange mounting on separate tank• Pump handle can be used horizontally and vertically• Interchangeable pump bodies due to same
mounting pattern• Pumps without reservoir include reservoir gasket• Lightweight and compact design
H Shown from left to right: PL-3007R, P-51, P-18, P-25
Low Pressure / High Flow Hand Pumps
When a High FlowCounts
Single-Speed
Single-Speed
Single-Speed
Usable OilCapacity
(cm3)
PumpType
Pressure Rating
(bar)
ModelNumber
OilDisplace-ment perStroke(cm3)
P-18P-25P-50P-51PL-3007RPL-2509RPL-2011RPL-1317RPL-1025RPL-3007FPL-2509FPL-2011FPL-1317FPL-1025F
2627272740404040404040404040
Max.HandleEffort
(kg)
29532773277819
18001800180018001800
*****
2,629,504,754,107,009,10
11,3017,6025,407,009,10
11,3017,6025,40
20017535020030025020013090
30025020013090
Foot Pump Conversion Kits
Convert your P-18 to footpower with the PC-10 Kit.Includes instructions foreasy conversion.
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
Application
The pump handle on PL-series pumps can be used invertical and horizontalposition.
* Requires the use of an external reservoir
���������
H The PL-3007F mounted on a 20 litres reservoir.
® 59
P-18P-25P-50P-51PL-3007RPL-2509RPL-2011RPL-1317RPL-1025RPL-3007FPL-2509FPL-2011FPL-1317FPL-1025F
P/PLSeries
Reservoir Capacity:
295-3280 cm3
Flow at Rated Pressure:
2,62-25,4 cm3/strokeOperating Pressure:
90-350 bar
PistonStroke
(mm)
Weight
(kg)
ModelNumber
21015215252
275275275275275
–––––
32717317392
159159159159159159159159159159
3315215218186868686866262626262
38240240200135135135135135135135135135135
48––
57134134134134134
–––––
––––
64646464646464646464
216––
610237237237237237237237237237237
30––
29203203203203203203203203203203
111684684160532532532532532532532532532532
13200200129
––––––––––
133–––
70707070707070707070
––––
41414141414141414141
––––
36363636363636363636
––––
12121212121212121212
–10109
11111111111111111111
––––
13131313131313131313
5,016,316,85,46,36,36,36,36,34,34,34,34,34,3
A B C D E F H J L M N P Q R S T
20,638,138,125,436,036,036,036,036,036,036,036,036,036,0
Dimensions (mm)
PL-serie F mounting dimensions (mm)
1/4"-18NPT
34˚
C
S
D
M
L
90˚
AB
L
E
J42˚
H
CD
1/4"-18NPT
3/8"-18NPT
S
AB
M
180˚
P-25, P-50
P-51
PN
Q R
JH
L45˚ 28˚
G1/4"
FS
CT
D B
PL-series F
P
EN
Q RA
JH
L45˚ 28˚
G1/4"
F
S
CT
D B
PL-series R
P-18
E
NAD C
B M
L
40˚
HJ
3/8"-18NPT
5053
47
48
43 24
4012
M8 ø2221
ø13
21
Low Pressure / High Flow Hand Pumps
60
®
Hydraulic Technology Worldwide
Cone Seal
Stainless Steel HighPressure fittingsseal on a ‘cone’ surface and do notrequire pipe sealer.The Gland Nutholds the sleeveand tubing tightagainst the conesurface to provide a2800 bar seal.
• Two-speed operation on the P-2282 allows for faster filloperation, reducing cycle times for many testing applications
• 303 Stainless steel construction on the 11-100 and 11-400 models enable use with many different fluids, suchas distilled water, alcohol, diesters, silicones, soluble oilsand petroleum
• Large release knob for improved control of pressurerelease
• Outlet ports are 3/4"-16 cone for 2800 bar rating • 3/8" NPT adaptor included with P-2282, for applications
under 700 bar
H Shown from left to right: 11-100, P-2282
Ultra-High Pressure Hand Pumps
983737737
2800700
2800
13N/A N/A
Two-Speed
Single-Speed
Usable OilCapacity
(cm3)
PumpType
PressureRating*
(bar)
ModelNumber
16,22N/AN/A
0,612,490,62
Oil Displacementper Stroke
(cm3)
P-228211-10011-400
48,154,454,4
Max.HandleEffort
(kg)1st
stage1st
stage2nd
stage2nd
stage
Sleeve
Stainless Steel Tubing
Body
Bleed HoleGland Nut
2-Way Shut-Off Valve 72-750
For 2800 bar applicationsrequiring a shut-off valve orgauge snubber. Made of 318 Stainless Steel and
utilizing .38 inch cone fittings, it is theperfect selection for use with your Ultra-High Pressure hand pump.
Test System Gauges
Ideal for monitoring pressurein your hydraulic circuit, TestSystem Gauges, such as theT6010L, are available with
cone threads or NPT threads and avariety of pressure ranges.
P-2282
T-6010L
45-116
83-011 43-701
Ultra-High Pressureup to 2800 bar
G Typical Test System
43-701
45-11643-300
72-75043-001
83-011
T-6010L
P-2282
G Test System with Gauge Snubber
* Contact Enerpac for applications where operating pressure is less than 10% of pressure rating.
Page: 116
To system
To system
® 61
.38" cone
.38" cone
.38" cone
.38" cone side/
.25" cone gauge port
.38" cone side/
.25" cone gauge port
.38" cone
.38" cone
.38" cone
100 mm tube, O.D. .38" *200 mm tube, O.D. .38" *300 mm tube, O.D. .38" *
.38F cone to 1/4" M NPTF
.38F cone to 3/8" M NPTF
.38F cone to 1/4" F NPTF
.38F cone to 3/8" F NPTF
Model Nr.
Ultra-High Pressure Hand Pumps
PistonStroke
(mm)
ModelNumber
P-228211-10011-400
A B C D E F H J L M N S T
Weight
(kg)
25,419,819,8
344240240
Gland Nut Plug
Elbow
Tee
GaugeTee
GaugeAdaptor
Coupling
Cross
Gland Nut with Sleeve
Tubing
H Optional Ultra-High Pressure Fittings and Tubings
ConnectionDescription
558266266
35151151
–177177
314545
133––
527635635
29162162
228114114
7237237
120314314
–77
–99
6,410,010,0
3/4"-16UNF J M
L
H
40˚
F A CB
EN
3/4"-16UNF
CD
E
J
M
N
1/4"-20UNC
T
35˚
A
S
B
L
H
P/11Series
Reservoir Capacity:
737-983 cm3
Flow at Rated Pressure:
0,61-2,49 cm3/strokeOperating Pressure:
700-2800 bar
700 bar onlyAdaptor
Adaptor
Dimensions (mm)
P-2282
11-100, 11-400
Note: .25" cone fittings use 9/16"-18 threads, 3/8" cone threads use 3/4"-16 threads.
* Actual tubing lengths are 19 mm less than nominal size shown. These dimensions make distance between centers of valves andfittings multiples of 100 mm spaces.
43-001
43-200
43-300
43-301
83-011
43-400
43-600
43-701
45-11645-12645-136
41-146
41-166
41-246
41-266
2800 bar
Optional gauge
Release Valve
62
®
Hydraulic Technology WorldwideWalkPacTM - Battery Powered Pumps
• Light weight, integral battery for improved ergonomics andmaximum portability
• Micro piston pump technology and direct drive for high efficiency and longer life
• Quiet and smooth operation plus ergonomic styling allowuser to “wear” the pump
• Powerful 24 volt interchangable battery pack for high performance and long life
• “Intelligent” battery charger provides fast one-hour chargeand complete battery conditioning for trouble free operation
• CR-400 coupler and dust cap included
Pick Up the Power
H Shown from left to right: PBR-12001E, PBM-11001E, PBR-13001E
H No need for long power cables or air hoses. You can take yourWalkPac™ anywhere you need.
H The included shoulder strap allows easy use of the WalkPac™even in difficult locations.
Additional Battery Packs
WalkPac™ battery packsand chargers are alsoavailable separately.
Foot Switch
Operate your WalkPac™keeping both hands free toposition the tool.Includes 3 m cable.
For use with all PBR-version WalkPacs.
Pendant Extension Cables
These cables allow the pump to beoperated at a greater distance forincreased safety and flexibility.For use with all PBR-version WalkPacs.
Battery Charger 115 VAC BC-1724BBattery Charger 230 VAC BC-1724EBattery Pack BP-1724
1,8 m Cable RPC-025,5 m Cable RPC-0613,7 m Cable RPC-15
Foot Switch (11000, 12000-Series) WFS-1Foot Switch (13000-Series) WFS-2
® 63
WalkPacTM - Battery Powered Pumps
622622622622622622
700700700700700700
Manual
Remote(with
pendant)
Usable Oil
Capacity(cm3)
PumpType
PressureRating
(bar)
Valve Function
0,1640,1640,1640,1640,1640,164
OutputFlow Rate
(l/min)
Weightincludingbattery
(kg)
ValveType
Dump Manual ReleaseDump and Hold
Dump Manual ReleaseDump and Hold
Model Number
PBM-11001EPBM-12001E*PBM-13001EPBR-11001EPBR-12001EPBR-13001E
686868686868
8,68,48,68,68,48,6
SoundLevel
(dBA)
ElectricManualElectricElectricManualElectric
PBSeries
Reservoir Capacity:
622 cm3
E
Flow at Rated Pressure:
0,164 l/minOperating Pressure:
700 bar
WalkPac™ Performance
The most commonly askedquestion concerning battery
powered equipment is: “How long will it last on a charge?”
Although ambient temperature, toolcondition, operating pressure andfrequency of use will affect actual battery life, as a rule of thumb youshould expect this type ofperformance:
Number ofTool Type Operations
Nut Cutter, 20 ton, 38 mm nuts 40Electrical Lug Crimping, 1,5 ton 70Hydraulic Knock-Out, 12 ton, 152 mm 25Rebar Cutter, 20 ton, 12 mm bar 28
For applications requiring morebattery life, a second pack can becharging, ready for use whenneeded.
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
Fault indicator light
“Pressure”
“Release”Reservoir fill cap (auto-vent)
Pendant receptacle (PBR-models only)
Note: To order your WalkPac™ without the battery charger, please delete the “E” suffix in the model number.* Available as a set, see note on this page.
PBR-13001E
WalkPac and Cylinder Sets
WalkPac Pumpsmarked with an * are
available as sets (pump,cylinder, gauge, couplers and
hose) for your ordering convenience.
Page: 50
WalkPac
FLOW CHART
Oil
Flo
w(l/
min
)E
Pressure (bar) E
WalkPac™ series
64
®
Hydraulic Technology Worldwide
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. For use with
the Economy pump the following gaugesare suggested:
For a full range of gauges, please refer tothe System Components section.
Economy Electric Pumps
• Light weight and compact design: 11,8 to 18,6 kg• Large easy-carry handle for maximum portability• Two-speed operation reduces cycle times for improved
productivity • 230 VAC 50/60-cycle universal motor will operate on
voltages as low as 115 volts • 24 VDC remote motor control, 3 m length for operator
safety• Starts under full load• High strength molded shroud, with integral handle,
protects motor from contamination and damage
H Shown: PUJ-1200E
1,93,81,93,81,93,8
131313131313
700700700700700700
Single-Acting
Double-Acting
Usable OilCapacity
(litres)
PumpType
(Used with cylinder)
Pressure Rating
(bar)
ModelNumber*
PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUJ-1400EPUJ-1401E
H An Economy pump PUJ-1200E is used with an RC-2514 to reposition a stamping die to simplify maintenance.
1st stage 2nd stage
Page: 105
* For 115 volt applications replace ’E’ suffix with ’B’.
** Electric dump valve for auto-retract of cylinders.
PUD-1100E, 1101EPUJ-1200E, 1201EPUJ-1400E, 1401E
G-2535LG-2535LG-2535L
GA-3–
GA-3
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
For Pump Model Number
GaugeModelNumber
GaugeAdaptorModel Nr.
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
Heavy onPerformance, Light on Weight
Page: 106
® 65
PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUJ-1400EPUJ-1401E
Economy Electric Pumps
ValveType
OutputFlow Rate
(I/min)
Weight
(kg)
CurrentDraw
(Amps)
ModelNumber*
362373362373362373
101010101010
133142133142133142
244368244368244368
244309244309244309
101105101105101105
119130119130119130
203323203323203323
HFEDCBA J
Dump**
3-way,2-pos.
4-way,3-pos.
11,817,210,015,413,218,6
858585858585
SoundLevel
(dBA)
230230230230230230
MotorVoltage
(VAC)
3,23,23,23,23,23,2
1st stage 2nd stage
PUSeries
Reservoir Capacity:
1,9-3,8 litres
E
Flow at Rated Pressure:
0,32 l/minMotor Size:
0,37 kWMaximum Operating Pressure:
700 bar
D
C
FA
1/4"-18NPT
E
J
3/8"-18NPT
3/8"-18NPT
B
H
Gauge Port (PUJ-1200/1201 only)
Outlet Port
Tankport
Dimensions (mm)
3,313,313,313,313,313,31
0,320,320,320,320,320,32
About the Economy Pump
The Economy pump is bestsuited to power small to
medium size cylinders or hydraulictools. Its light weight and compactdesign make it ideal for applicationswhich require easy transport of thepump. The Universal motor works well onlong extension cords or generator-driven electrical power supplies.
For further application assistancerefer to the ‘Yellow Pages’.
PUD Series• Provides advance-retract control
of single-acting cylinders• Ideal for punching applications• For applications not requiring load
holding• 3 m pendant controls motor and
valve operation
PUJ Series• Available with 3- and 4-way
valves for single or double-actingcylinders
• 3 m pendant controls the motoroperation
• Manual valves provide advance-hold-retract tool operation
FLOW CHARTO
il Fl
ow
(l/m
in)
E
Pressure (bar) E
Page: 93
Economy Series
66
®
Hydraulic Technology Worldwide
• Patented Genesis technology: - coaxial piston design allows high performance in the
most compact and light weight package, starting at 28,1 kg- first-stage piston pump enables higher by-pass pressure
for improved productivity• Powerful 0,84 kW universal motor for a high power to
weight ratio, and the ability to run on as little as 50% ofrated line voltage
• Ergonomic motor shroud is lined with sound reductionmaterial while providing protection for the motor
• Four reservoir sizes to operate a wide range of cylindersand tools
• 24-VDC remote pendant controls for safer operation• Externally adjustable relief valve allows control of
operating pressure without opening the pump• Analog reservoir sight gauge for ease in monitoring oil
level also includes filtered breather
Titan Electric Pumps
Featuring GenesisTechnology
H Shown from left to right: PUD-3309E, PUM-3209E, PUR-3420E
5 BASIC PUMP TYPES
Select the model that suits yourapplication. For special requirements seepage 69 or contact your Enerpac office.
PUF Series: with Solenoid Valve• Identical to PUR-series, except pendant
is replaced with foot switch for hands-free operation
PUJ Series: with Manual Valve• For light production and lifting
applications• Manual valve control for single-acting or
double-acting cylinders• Control pendant with 3 m cord for
remote motor operation
PUM Series: with Manual Valve• Ideal choice for most applications• Manual valve control, for single-acting
or double-acting applications• Manual motor control
PUR Series: with Solenoid Valve• Ideal for lifting applications or wherever
remote control is required• All valves are 3 position for Advance-
Hold-Retract• Control pendant with 3 m cord for
remote valve operation F A Titan PUJ-3309E
is used with ahydraulic cutter tocut wire rope.
H SELECTION CHARTFor more technical information see next page.
PUD Series: with Dump Valve• Ideal for punching, crimping and cutting• For use when load-holding is not
required (3100 Series)• Control pendant with 3 m cord
controls valve and motor• Provides Advance-Hold-Retract for
single-acting cylinders (3300 Series)
* See Valves section for technical information onvalve types.
® 67
Titan Electric Pumps
Weight
(kg)
Single-ActingSingle-ActingSingle-ActingSingle-Acting
Single-ActingSingle-ActingSingle-ActingSingle-ActingSingle-ActingSingle-ActingDouble-ActingDouble-ActingDouble-ActingDouble-ActingDouble-ActingDouble-Acting
Double-ActingDouble-Acting
Single-ActingSingle-ActingDouble-ActingDouble-Acting
Advance/RetractAdvance/Retract
Advance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/RetractAdvance/Retract
Advance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract
599
20
920409
20409
20409
2040
920
999
20
28,632,232,249,4
28,145,866,728,145,466,728,145,466,738,155,376,7
38,155,3
30,830,830,848,1
Genesis Series
Genesis Series
Genesis Series
Genesis Series
Model Number230 VAC 1 Phase
Used with Cylinder
Valve Type* Pump ControlValve Function Usable OilCapacity
(litres)
PUSeries
Reservoir Capacity:
5, 9, 20 and 40 litres
E
Flow at Rated Pressure:
0,98 l/minMotor Size:
0,84 kW
PUD-3105EPUD-3109EPUD-3309EPUD-3320E
PUM-3209EPUM-3220EPUM-3240EPUM-3309EPUM-3320EPUM-3340EPUM-3409EPUM-3420EPUM-3440EPUR-3409EPUR-3420EPUR-3440E
PUF-3409EPUF-3420E
PUJ-3209EPUJ-3309EPUJ-3409EPUJ-3420E
Genesis Series
DumpDump
Dump and HoldDump and Hold
VM-2VM-2VM-2VM-3VM-3VM-3VM-4VM-4VM-4BVS-4BVS-4BVS-4
BVS-4BVS-4
VM-2VM-3VM-4VM-4
RemoteRemoteRemoteRemote
ManualManualManualManualManualManualManualManualManualRemote Remote Remote
Remote (Foot)Remote (Foot)
Remote (Man.)Remote (Man.)Remote (Man.)Remote (Man.)
Pump Type
Titan Pump Application
The Titan pump is bestsuited to power medium to
large size cylinders or hydraulictools, or wherever high speed,intermittent hydraulic power isneeded. Patented Genesis Technologyprovides high by-pass pressures for increased productivity,specifically in applications usinglong hose runs and high pressuredrop circuits like heavy lifting orcertain double-acting tools.
Its light weight and compact designmake it ideal for applications whichrequire easy transport of the pump.It utilizes a Universal motor whichwill work well on long extensioncords or generator driven electricalpower supplies.
For further application assistancesee the ‘Yellow Pages’ or contactyour local Enerpac office.
Page: 93
Maximum Operating Pressure:
700 bar
68
®
Hydraulic Technology Worldwide
83-88
Reservoir Dimensions
25 @ 115-1-50/6012,5 @ 230-1-50/60700 10,5
Titan Electric Pumps
0,84
MotorSize
(kW)
Pressure Rating
(bar)
Motor ElectricalSpecifications*
(Amps @ Volts-Ph-Hz)
Output Flow Rate
(l/min)
Relief ValveAdjustment
Range
(bar)
SoundLevel
(dBA)
140-700
* At full load
1st stage 1st stage2nd stage 2nd stage
110 0,98
20 and 40 litres reservoir
5 and 9 litres reservoir
Reservoir HeightA
(mm)
Usable OilCapacity
(litres)
59
2040
119169185315
Optional Roll Bar(20 litres only)
TITAN PERFORMANCE CHART
F A special bolting version of theTitan is used with an EnerpacTorque Wrench in the installationof a draw bar.
A Titan PUM-3309E is used withan NC-3241 Nut Splitter to
remove nuts in the repair of a loading bucket. E
F For full features see previous page.
FLOW CHART
Oil
Flo
w (l
/min
)E
Pressure (bar) E
Titan Series
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
® 69
Post-Tensioning Model
Developed exclusively forthis tough application, theTitan Post-TensioningPump includes an integral
roll-cage and cooler to extend pumplife and service intervals for thismarket. To order your 230 VAC Titan Post-Tensioning pump,
use the following model numbers:
For other voltages and CSAinformation, please contact yourEnerpac office.
Titan Electric Pumps
PUSeries
Reservoir Capacity:
5, 9, 20 and 40 litres
E
Flow at Rated Pressure:
0,98 l/minMotor Size:
0,84 kWMaximum Operating Pressure:
700 bar
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment.
For all Titan pumps, we suggest the GP-10S, with gauge adaptor GA-2.For a full range of gauges, please refer to the System Components section.
Page: 105
P U M - 3 2 09 E R .1
ProductType
2MotorType
3PumpType
4PumpSeries
5ValveType
6Reservoir
Size
7Motor
Voltage
8Options
1 Product TypeP = Pump
2 Motor TypeU = Universal Motor
3 Pump TypeD = Dump*F = Foot SwitchJ = JogM = ManualR = Remote (Solenoid)N = No Valve
4 Pump Series3 = 0,84 kW, 700 bar
5 Valve Type0 = No Valve1 = Dump2 = 3-way, 2-position3 = 3-way, 3-position4 = 4-way, 3-position6 = 3-way, 3-position, with Locking Valve8 = 4-way, 3-position, with Locking Valve
6 Reservoir Capacity05 = 5 litres** 09 = 9 litres 20 = 20 litres 40 = 40 litres
7 Motor Voltage B = 115 V, 1 Ph, 50/60 HzE = 230 V, 1 Ph, 50/60 Hz
8 Options: (leave blank if not required)R = Roll Bar (20 litres only)E = EPR SealsV = Viton Seals
CUSTOM BUILD YOUR TITAN PUMPIf the Titan that would best fit your application cannot be found in the charton the previous page, here you can easily build your custom Titan pump.
H This is how a Titan Pump Model Number is built up:
Model Number: PUR-3420E
PUR-3420E is a 0,84 kW, 700 bar,electric pump, with a 4-way, 3-position valve, remote control, a 20 litres reservoir and a 230 V, 1 Phase, 50/60 Hz motor.
Ordering Example 1
Model Number: PUM-3305E
PUM-3305E is a 0,84 kW, 700 bar,electric pump, with a 3-way, 3-position valve, a 5 litres reservoirand a 230 V, 1 Phase, 50/60 Hz motor.
Ordering Example 2
* Available with dump valve and 3-way, 3-position valve type
** Consult Enerpac for duty cycle
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses. Page: 106
Valve Model Number
VM-2 PUM-3205FPTVM-4 PUM-3405FPTVM-4 (Power Seat) PUM-3805FPT
70
®
Hydraulic Technology WorldwideSubmerged Electric Pumps
• Two-speed operation reduces cycle times for improvedproductivity
• Powerful 0,37 kW induction motor is submerged in the oilreservoir to run cooler, protect the motor, simplify thepump interface, save space and reduce noise
• Large 5,5 litres reservoir allows operation of a wide rangeof cylinders
• 24 VDC remote pendant control on certain models for safer operation
• Externally adjustable relief valve allows control ofoperating pressure without opening the pump
• 40-micron internal return line filter keeps oil clean, promoting longer pump life
• Full length side tube for easy monitoring of oil level
H Shown: PEJ-1401E
PED Series: with Dump Valve
• Ideal for punching, crimping and cutting•For use when load holding is not
required•Control pendant with 3 m cord controls
valve and motor
5 BASIC PUMP TYPES
Select the model that suits yourapplication. For special requirements seepage 73 or contact your Enerpac office.
PEM Series: with Manual Valve
• Ideal choice for most applications•Manual valve control, for both single-
acting and double-acting applications•Manual motor control
PER Series: with Solenoid Valve
• Ideal for production and lifting•All valves are 3 position for
Advance-Hold-Retract•Control pendant with 3 m cord
for remote valve operation
PEJ Series: with Remote Jog• For light production and lifting
applications• Manual valve control for single-acting or
double-acting cylinders• Control pendant with 3 m cord
for remote motor operation
PES Series: with Pressure Switch
•Designed for continuous pressureapplications, such as clamping,workholding and testing
•All versions include manual valves fordirectional control
F The Remote Jog Model of theSubmerged Pump simplifiesrepair on this constructioncrane.
Best Performanceon Mid-RangeCylinders and Tools
H SELECTION CHARTFor more technical information see nextpage.
* See the Valve Section of this catalog fortechnical information on valve types.
® 71
Submerged Electric Pumps
Model Number230 VAC, 1 ph
Used with Cylinder
Pump Type Valve Type*Valve Function Usable OilCapacity
(litres)
Weight
(kg)
PED-1001E
PEM-1201EPEM-1301EPEM-1401E
PER-1301EPER-1401E
PEJ-1201EPEJ-1301EPEJ-1401E
PES-1201EPES-1401E
Single-Acting
Single-ActingSingle-ActingDouble-Acting
Single-ActingDouble-Acting
Single-ActingSingle-ActingDouble-Acting
Single-ActingDouble-Acting
Dump
Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position
Solenoid, 3-way, 3-positionSolenoid, 4-way, 3-position
Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position
Manual, 3-way, 2-position Manual, 4-way, 3-position
Advance/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/Retract
5,5
5,55,55,5
5,55,5
5,55,55,5
5,55,5
24,9
24,024,024,0
29,529,5
24,924,924,9
28,128,1
PESeries
Reservoir Capacity:
5,5 litres
E
Flow at Rated Pressure:
0,27 l/minMotor Size:
0,37 kW
Submerged PumpApplication
The Submerged pump isbest suited to power small tomedium size cylinders or hydraulictools, or whenever quiet,intermittent hydraulic power isneeded. With its low sound level and theaddition of the optional oil cooler,the Submerged pump is suited to
light production work as well.
Its light weight and compact designalso make it ideal for applicationswhich require some transport of thepump.
For further application assistancesee the ‘Yellow Pages’ or contactyour local Enerpac office.
Page: 93
Maximum Operating Pressure:
700 bar
72
®
Hydraulic Technology WorldwideSubmerged Electric Pumps
13 @ 115-1-50/606,75 @ 230-1-50/60700 2,00,37
MotorSize
(kW)
PressureRating
(bar)
Motor ElectricalSpecifications*
(Amps @ Volts-Ph-Hz)
OutputFlow Rate
(l/min)
Relief ValveAdjustment
Range
(bar)
62-70
SoundLevel
(dBA)
70-700
*At full load.
1st stage 1st stage2nd stage 2nd stage
70 0,27
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
SUBMERGED PUMP PERFORMANCE
F This PED-1001E Submergedpump quickly and quietly powers a hydraulic nut cutter in thisbucket maintenance application.
F For full features see previous page.
a Heat Exchanger (optional for all models)
b Fill Port
c Pressure Switch (PES-series, optional for other models)
d Oil Level Indicator
FLOW CHART
Oil
Flo
w (l
/min
)E
Pressure (bar) E
Submerged Series
® 73
Submerged Electric Pumps
PESeries
Reservoir Capacity:
5,5 litres
E
Flow at Rated Pressure:
0,27 l/minMotor Size:
0,37 kWMaximum Operating Pressure:
700 bar
P E M - 1 3 01 E1
ProductType
2MotorType
3PumpType
4PumpSeries
5ValveType
6Reservoir
Size
7Motor
Voltage
1 Product TypeP = Pump
2 Motor TypeE = Electric Motor
3 Pump TypeD = DumpJ = JogM = ManualR = Remote (Solenoid)S = Pressure Switch
4 Pump Series1 = 0,37 kW, 700 bar
5 Valve Type0 = Dump2 = 3-way, 2-position, normally open3 = 3-way, 3-position, tandem center 4 = 4-way, 3-position, tandem center
6 Reservoir Capacity01 = 5,5 litres
7 Motor Voltage and Heat ExchangerB = 115 V, 1 Ph, 50/60 HzD = 115 V, 1 Ph, 50/60 Hz
with Heat ExchangerE = 230 V, 1 Ph, 50/60 HzF = 230 V, 1 Ph, 50/60 Hz
with Heat Exchanger
CUSTOM BUILD YOUR SUBMERGED PUMPIf the Submerged Pump that would best fit your application cannot be foundin the chart on page 71, here you can easily build your custom submergedpump.
H This is how a Submerged Pump Model Number is built up:
Model Number: PER-1301E
The PER-1301E is a 0,37 kW,700 bar, submerged electricpump, with 5,5 litres usable oilcapacity, a 3-way, 3-position,solenoid remote valve and a230 V, 1 Phase, 50/60 Hzmotor.
Ordering Example Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses. Page: 106
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
74
®
Hydraulic Technology Worldwide
ReservoirCapacity
(litres)
VM-3VM-3LVM-4VM-4LVM-4
BVS-3BVS-4BVS-4BVS-4BVS-4
VM-2VM-3VM-4VM-4
582040
5820
820202040
5582040
8202040
Valve**Model
Number
Valve Function
Hushh Electric Pumps
The Standard forIndustrialApplications
H Shown from left to right: PEM-3420W, PER-3405WS
PEN-Series without Valve
• Ideal for matching your valving to your needs, for example in production applications.
PED-Series with Dump Valve
• Ideal for punching, crimping and cutting• For use when load holding is not required• Control pendant with 3m cord controls valve
and motor
PEM-Series with Manual Valve
• Ideal choice for most applications• Manual valve control, for both single-acting or
double-acting applications• Manual motor control
PER-Series with Solenoid Valve
• Ideal for production and lifting applications• All valves are 3-position for Advance-Hold-Retract• Control pendant with 3m cord for remote valve
operation
PES-Series with Pressure Switch and Manual Valve
• For continuous-pressure applications such as clamping• Includes a manual valve and a pressure gauge• Adjustable pressure switch turns pump off when
desired pressure is reached.
5 BASIC PUMP CONFIGURATIONS
Select your hushh pump model here for mostapplications. For special requirements see the hushh pump ordering matrix.
Pump Type
* All models in this chart are 400 VAC, 3 phase at 50 Hz. For other options please refer to the Hushh Pump ordering matrix on page 79.
Used withCylinder
•••
••
•
••
•••
••••
••
•••
••••••••••••••
••••••••••
•••
•••
••••••••••••••
Page: 79
All models in the chartbelow are the industriesmost commonly selected
pump configurations. See the Hushh Pump ordering matrix for more options.
Page: 79
®
Hydraulic Technology Worldwide
® 75
PEN-2005WSPEN-2008WSPEN-2020WS
–
PED-2105WSPED-2108WSPED-2120WS
PEM-2308WS–
PEM-2420WSPEM-2820WS
–
PER-2305WSPER-2405WS
–––
PES-2208WS–––
272944
293146
32
4749
3740
35
––––
–PED-2108WPED-2120W
––
PEM-2420WPEM-2820WPEM-2440W
–PER-2405WPER-2408WPER-2420WPER-2440W
–PES-2320WPES-2420W
–
3247
485066
41445977
4851
–PEN-3008WS
––
–PED-3108WS
–
PEM-3308WSPEM-3620WS
–––
PER-3305WSPER-3405WS
–––
PES-3208WSPES-3320WS
––
33
35
3752
4143
3749
––
PEN-3020W–
––
PED-3120W
–PEM-3620WPEM-3420WPEM-3820W
–
–––––
––
PES-3420W–
49
51
535153
52
––
PEN-5020WS–
––
PED-5120WS
–––
PEM-5820WS–
PER-5305WSPER-5405WS
–––
––
PES-5420WS–
49
51
53
4446
57
–––
PEN-5040W
––
PED-5120W
–––
PEM-5820W–
–––––
–––
PES-5440W
78
52
54
84
Hushh Electric Pumps
• Available as two-stage model for reduced cycle times andimproved productivity
• Totally enclosed fan-cooled motors are ideal for outdooruse in many environments
• 24-VAC solenoid valves and remote pendant controls forsafer operation
• Adjustable pressure relief valve• 71-73 dBA for quiet in-plant applications with electric
motor
PESeries
Reservoir Capacity:
5, 8, 20 and 40 litres
E
Flow at Rated Pressure:
0,55 - 1,52 l/minMotor Size:
0,75 - 1,1 and 2,2 kWMaximum Operating Pressure:
700 bar
**See Valve Section for technical information.
Two StageSingle Stage Two StageSingle Stage Two StageSingle Stage
2000-SeriesOutput Flow Rate at 700 bar: 0,55 l/min
3000-SeriesOutput Flow Rate at 700 bar: 0,82 l/min
5000-SeriesOutput Flow Rate at 700 bar: 1,52 l/min
Model Number
Weight
(kg)
Model Number
Weight
(kg)
Model Number
Weight
(kg)
Model Number
Weight
(kg)
Model Number
Weight
(kg)
Model Number
Weight
(kg)
Single Stage or Two Stage
Choose Single Stageoperated pumps, for
applications that require constantflow regardless of pressure, such astesting or clamping.
Two Stage operated pumps have an increased output flow (appr.10xhigher) at pressures below 65 bar.This allows fast plunger movementtowards the load, for reduced cycletimes and increased productivity.
76
®
Hydraulic Technology Worldwide
A B C D E F H 1) J 2) K 3)
ReservoirCapacity
(litres)
Hushh Electric Pumps
2000
3000
5000
Single-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stage
HushhPumpSeries
Operation Pressure Rating
(bar)
Type of Pump Motor Size
0,750,751,101,102,202,20
139013901390139013901390
Output Flow Rate
(l/min)
Relief ValveAdjustment
Range(bar)
SoundLevel
(dBA)
All models shown are 400 VAC, 3 phase, 50 Hz. See the Hushh Pump ordering matrix (page 79) for more options.Note: Single-stage, 5000 Series models are not available with 115 VAC, 1 phase or 230 VAC, 1 phase.
–gerotor
–gerotor
–gerotor
700700700700700700
2x Rad.pist.2x Rad.pist.3x Rad.pist.3x Rad.pist.3x Rad.pist.3x Rad.pist.
–65–
65–
65
0,550,550,820,821,521,52
–5,1–
8,5–
8,5
1st stage 2nd stage 1st stage 2nd stage 1st stage 2nd stage RPM kW
58
2040
304304460460
205205340340
335335
––
159191191320
––
5050
165165295295
409440440615
73737373
405405
––
Usable Oil
Capacity(litres)
Pump Dimensions (mm)
CA
KJE E
16 x ø75010
3/8"-18NPT
F
D
H
B
4 x ø7 2525
0 100 200 300 400 500 600 700
1,0
0,0
2,0
3,0
4,0
5,0
6,0
7,0
9,0
8,0
10,0
0 100 200 300 400 500 600 700
1,0
0,0
2,0
3,0
4,0
5,0
6,0
7,0
9,0
8,0
10,0
0 100 200 300 400 500 600 700
1,0
0,0
2,0
3,0
4,0
5,0
6,0
7,0
9,0
8,0
10,0
Oil
Flo
w (l
/min
)E
Oil
Flo
w (l
/min
)E
Oil
Flo
w (l
/min
)E
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
H PERFORMANCE CHART
H FLOW CHARTS
70-700
70-700
70-700
71
73
73
5,07,5
20,040,0
2000WS (single stage)2000W (two stage)
2000-Series 3000-Series 5000-Series
3000WS (single stage)3000W (two stage)
5000WS (single stage)5000W (two stage)
1) Add 25mm for all 5000 singlestage versions or all pumpswith 230VAC, 1phase motors.
2) Only for pumps with manualvalves (PEM- and PES-models).
3) Only for 5 and 8 litres pumpswith electric valves.
®
Hydraulic Technology Worldwide
® 77
Hushh Electric Pumps
H Reliability is the key issue when workingon projects like this.
H This Hushh pump equipped with pressure gauge and flow control valves,is used for concrete form removal.
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses. Page: 106
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 112
PESeries
Reservoir Capacity:
5, 8, 20 and 40 litres
E
Flow at Rated Pressure:
0,55 - 1,52 l/minMotor Size:
0,75, 1,1 and 2,2 kWMaximum Operating Pressure:
700 bar
Application Tip
The Hushh-Series is themost versatile of the Enerpac
pump line. It is best suited to powermost medium to large size cylindersor multiple cylinder circuits. Due toits wide selection of reservoir, valveand control options, the Hushh-Series is well suited to productionwork as well as many liftingapplications. With the smaller
reservoirs it is light enough for someportable applications, as long as theavailable power supply is stable. TheHushh-Series induction motor needsa steady supply of A.C. power.
For further application assistancesee the ‘Yellow Pages’ or contactyour local Enerpac office.
H This PEM-3240W Hushh electric pumpfeatures a 40 litres reservoir for this multi-cylinder system.
For additional models (such as one-stage) andoptions, see the matrix andaccessories pages.
Page: 79
78
®
Hydraulic Technology Worldwide
To order, refer tothe Hushh-Pumpmatrix on page 79for correct voltage.
Available as anaccessory only.
To order installedon your pump, referto the Hushh-Pumpmatrix on page 79for correct voltage.
To order refer tothe Hushh-Pumpmatrix on page 79.
Hushh Pump Accessories & Options
HeatExchanger
CarryingHandle
Oil Reservoir
Roll Bar
Oil Filter Kit
Caster Kit
MotorVoltage
• For use in production applications or anytime the pump will run for more than 1 hour at a time
• Available as an option or an accessory
• Robustly constructed• Easy to read oil level indicator• Filled with premium hydraulic oil• Usable oil capacities of 5, 71/2, 20 or 40 litres
• Attached to the reservoir mounting rails• For easy portability and facilitating crane
hoisting of 5 and 8 litres reservoirs• Dimensions ( L x W x H ) 570 x 185 x 415 mm
• Attached to the reservoir mounting rails, it protects your Hushh-Pump in severeapplications
• Incorporates a top cover plate• Dimensions ( L x W x H )
PPK-20 770 x 315 x 565 mmPPK-40 770 x 315 x 595 mm
• Extends service life of oil and pump• 25 micron filter rating• Filters return-line oil
• A set of 4 casters• For applications requiring mobility• Attached to the reservoir mounting rails,
it allows the pump to be easily rolled on theshop floor
• 5 Different types of motor voltages for AC supply
• 1- or 3-phase • 50 Hz frequency• With or without Heat Exchanger
Available as anaccessory only.
Available as anaccessory only.Cannot be usedwith Roll Bars.
ModelNumber
FeaturesDescription OrderingInformation
Availablefor allmodels
PC-95
PFC-25
PPK-20 (20 ltr)PPK-40 (40 ltr)
PAC-230
PPH-58
Availablefor allmodels
Available as anaccessory only.
®
Hydraulic Technology Worldwide
® 79
Hushh Pump Ordering Matrix
P E M - 3 3 05 W S .1
ProductType
2MotorType
3Valve
Operation
4PumpSeries
5ValveType
6ReservoirCapacity
7Motor
Voltage
8Options
CUSTOM BUILD YOUR HUSHH PUMPIf the Hushh Pump that would best fit your application cannot be found in thechart on page 75, here you can easily build your custom Hushh pump.
H This is how a Hushh Pump Model Number is built up:
Model Number: PEM-3305WS
PEM-3305WS is a 1,1 kW, 700 bar pump, single stage,oil flow 0,55 l/min, with a 3-way, 3-position manual valve(VM-3), a 5 litres reservoir, and 400V, 3 phase, 50 Hz motor.
Ordering Example 1
Model Number: PER-2405W
PER-2405W is a 0,75 kW twostage pump, with a 0,82 l/minoil flow at 700 bar, a 4-way, 3-position solenoid valve(BVS-4), a 5 litres reservoir anda 400V, 3 phase, 50 Hz motor.
Ordering Example 2
1 Product Type
P = Pump
2 Motor Type
E = Electric Motor
3 Valve Operation
D = DumpM = ManualR = Remote (Solenoid)S = Pressure SwitchN = No Valve**
4 Pump Series
2 = 0,55 l/min (0,75 kW)3 = 0,82 l/min (1,10 kW)5 = 1,52 l/min (2,20 kW)
5 Valve Type0 = No valve**1 = Dump Valve2 = 3-way, 2-position,
manual valve3 = 3-way, 3-position,
manual or solenoid valve4 = 4-way, 3-position,
manual or solenoid valve6 = 3-way, 3-position,
manual locking valve with pilot operated check
8 = 4-way, 3-position, manual locking valve with pilot operated check
6 Reservoir Capacity05 = 5 litres08 = 8 litres20 = 20 litres40 = 40 litres
7 Motor VoltageA = 115 V, 1 ph, 50 Hz*C = 115 V, 1 ph, 50 Hz,
with Heat Exchanger*E = 230 V, 1 ph, 50 Hz*F = 230 V, 1 ph, 50 Hz,
with Heat Exchanger*K = 440 V, 3 ph, 50 HzL = 440 V, 3 ph, 50 Hz,
with Heat ExchangerT = 230 V, 3 ph, 50 HzU = 230 V, 3 ph, 50 Hz,
with Heat ExchangerW = 400 V, 3 ph, 50 HzX = 400 V, 3 ph, 50 Hz,
with Heat Exchanger
8 Options
blanc = Two stageE = EPR SealsS = Single stageV = Viton Seals
* Not available for 5000-Series singlestage models.
** For remote valve or valve block, usea BSS-1090 high pressureconnecting plate
Viton and EPR Seals
Enerpac pumps andcomponents are shipped with
Polyurethane and Buna N seals for mostsealing requirements. These sealcompounds offer the best performanceand durability for most applications.
For applications that require specializedseals, Enerpac does make availableViton and EPR seals as options forcertain pumps. The use of these sealsmay reduce life between seal changes,but may be the only solution to theapplication.
Viton:Sometimes required for sealcomputability issues, such as with most glycols, but most commonlyrecommended for hightemperature applications.
EPR: Generally required for use withfire-resistant fluids such asphosphate esters. When used,they must not be exposed tomineral-base fluids!
Valve Selection
For help in selecting the rightvalve for your application, refer
to the Valve Information page of our‘Yellow Pages’.
Page: 104
PESeries
Reservoir Capacity:
5, 8, 20 and 40 litres
E
Flow at Rated Pressure:
0,55 - 1,52 l/minMotor Size:
0,75 - 1,1 and 2,2 kWMaximum Operating Pressure:
700 bar
80
®
Hydraulic Technology Worldwide8000 and 9000 Series, Electric Pumps
• Single-speed operation with two and four independentsplit-flow outlets
• Two-speed operation with high-flow outlet• Oil delivery of each outlet remains equal regardless of
pressure• 60 litres usable oil capacity allows operation of a wide
range of cylinders• Powerful 4 and 9,5 kW motor, available in three voltage
options
The Axial PistonPump with fourindependant outlets
H Shown: PPE-9483-4
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 106
H To lift a rigid construction, four double-acting RR-2006 cylinders are powered by a 4-splitelectric pump.
60606060
190300
––
4,09,59,59,5
two-speed
single-speed
UsableOil
Capacity
(litres)
MotorSize
(kW)
Pump Type PressureRating
(bar)
1 x 4,21 x 8,02 x 5,04 x 2,5
OutputFlow Rate
(l/min)
Pump Series*
PPN-8000PPN-9000PPN-9000-2PPN-9000-4
700700700700
14,514,5
––
1st stage 1st stage2nd stage 2nd stage
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
* The “N” in the model number stands for No Valve. All pump models can be ordered withManual or Solenoid Valves. See selection chart on next page.
Locking Valves
Pumps with VM-3 or VM-4manual valves may beordered with locking valves.
This locking feature provides a hydrauliclock for the cylinder using pilot-operatedcheck valves. To order this option, just place an “L”suffix at the end of the model number.For more information, contact your local Enerpac office.
Page: 120
® 81
* = Single-Acting = Double-Acting
8000 and 9000 Series, Electric Pumps
PPSeries
Reservoir Capacity:
80 litres
E
Flow at Rated Pressure:
4 x 2,5 to 8,0 l/minMotor Size:
4,0 - 9,5 kWMaximum Operating Pressure:
700 bar
274275275286
8000-SeriesHigh-flow outlet
9000-SeriesHigh-flow outlet
9000-Series2 Split-flow outlets
9000-Series4 Split-flow outlets
ModelNumber
Weight(kg)
–VM-3VM-4BVS-4
Used withCylinder*
–ManualManual
Solenoid
–
•••
N/A
•N/A
••
–
•••
–
•••
ValveControl
Valve Function ValveModel
Number
Speed Chart
To determine how a specificpump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page: 103
1000 200 300 400 500 600 7000
2
4
6
8
10
12
14
16
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
PPN-8083PPM-8383PPM-8483PPE-8483
303316316330
ModelNumber
Weight(kg)
PPN-9083PPM-9383PPM-9483PPE-9483
304319319340
ModelNumber
Weight(kg)
PPN-9083-2PPM-9383-2PPM-9483-2PPE-9483-2
328333333372
ModelNumber
Weight(kg)
PPN-9083-4PPM-9383-4PPM-9483-4PPE-9483-4
®
®
®
PP E - 9 4 8 3 - 21 2 3 4 5 6 7
Product Valve Pump Valve Reservoir Motor Split-flowType Control Series Type Capacity Voltage Outlets
H This is how 8000- and 9000-Series Pump Model Numbersare built up:
1 Product Type
PP = Power Pump
2 Valve Control
N = No ValveM = ManualE = Solenoid (Electrical)
3 Pump Series
8 = 8000-Series, 4 kW9 = 9000-Series, 9,5 kW
4 Valve Type
0 = No Valve3 = 3-way, 2-position,
manual valve4 = 4-way, 3-position,
manual or solenoid valve
5 Reservoir Capacity8 = 80 Litres
6 Motor Voltage*3 = 400 V, 3 ph, 50 Hz5 = 230 V, 3 ph, 50 Hz6 = 440 V, 3 ph, 50 Hz
* In the selection chart below only400V models (suffix 3) are shown.To order 230V or 440V models,change this suffix to 5 or 6.
7 Split-Flow Outlets9000-Series only2 = 2 equal flow outlets
of 5,0 l/min. at 700 bar4 = 4 equal flow outlets
of 2,5 l/min. at 700 bar
475
610
96540
790
1030
225225225155
PPN-9000PPN-8000
PPN-9000-2PPN-9000-4
82
®
Hydraulic Technology WorldwidePAH-Series, Air Hydraulic PumpsH Shown: PAH-90
The High-Flow ‘Multi-Fluid’ Pump
• Converts 2-7 bar air pressure to 18-900 bar hydraulicpressure
• Can be used with hydraulic oil or other non corrosiveliquids such as water, kerosene, gasolene etc.
• Six models offer many pressure-flow combinations• User supplied valving and reservoir provides system
flexibility• Exhaust-air muffler lowers sound level for reduced
operator fatigue• Heavy duty construction for long life, even in harsh
environments• Ideal for multi-fluid testing applications
����������������
yyyyyyyyyyyyyyyy
������������������������
yyyyyyyyyyyyyyyyyyyyyyyy �
���
��
��
��
��
��
��
����������������
yyyyyyyyyyyyyyyy
����������������
yyyyyyyyyyyyyyyy
������������
yyyyyyyyyyyy
RFL-102 Regulator-Filter-Lubricator
Recommended for use withall air pumps. Providesclean, lubricated air and
allows for air pressure adjustment. Steelbowl guards are standard.
150-200µ filter150-200µ filter
max.0,5 m
PP T
T
Air pressureAir pressureReservoir mounted External tank
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 106
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
® 83
Air Hydraulic Pumps
PAHSeries
Pressure Intensification Ratio:
1:9 - 1:165Flow at Rated Pressure:
0,17-5,00 l/minAir Consumption:
3000 l/minMaximum Operating Pressure:
56-900 bar
All PAH-Series air hydraulic pumps require auser supplied remote valveand reservoir.
For more ordering information, call yourEnerpac distributor. For a full range ofvalves, please refer to the valve sectionof this catalogue.
Page: 119
76
ø204
ø196
36
G1/4"G3/4"
313
44
ø23055
393 222
95
76
15
135
12,5
160208
G3/8"G3/8"
A R
56120220400800900
MaximumPressure
Rating
(bar)
5,02,01,71,3
0,380,17
OutputFlow Rate
(l/min)
2-72-72-72-72-72-7
AirPressure
Range
(bar)
1:91:201:361:671:1271:165
PressureIntensification
Ratio
80-8580-8580-8580-8580-8580-85
SoundLevel
(dBA)
Weight
(kg)
191919191919
ModelNumber
PAH-05PAH-12PAH-22PAH-40PAH-80PAH-90
13,08,56,84,22,11,5
no load load
00
5
200 400 600 800
1
2
3
4
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
0 2500
3
6
9
12
15
50 100 150 200
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
PAH-22 PAH-12 PAH-05
PAH-40 PAH-80 PAH-90
Air inletExhaustmuffler
84
®
Hydraulic Technology WorldwideTurbo Air Hydraulic Pumps
• ‘Turbo’ feature utilizes exhaust air to help power the pump, developing 700 bar hydraulic pressure with only5,5 bar air pressure
• Patented “Air Saver” feature for lower air consumption andlower operating costs
• Air exhaust muffler for quieter operation and reducedoperator fatigue
• Return-to-tank port for use in remote valve applications • Air and oil inlet filters for reduced risk of damage from
contamination• Extensive use of engineered plastics for light weight,
corrosion resistance and durability• Internal pressure relief valve for overload protection
The New Standardin Air HydraulicPumps
H Shown from left to right: PAM-1402N, PAT-1102N
H Easily operated by hand or by foot
2081422720814227
Single-Acting
Double-Acting
Usable Oil
Capacity
(cm3)
Used with Cylinder
ModelNumber
PAT-1102NPAT-1105NPAM-1402NPAM-1405N
RFL-102 Regulator-Filter-Lubricator
Recommended for use withall air pumps. Providesclean, lubricated air and
allows for air pressure adjustment. Steelbowl guards are standard.
Large Reservoir Models
The Turbo Air Pump is alsoavailable with an enlargedreservoir: PAT-1105N and PAM-1405N.
Hoses
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page: 106
Pump and Cylinder Sets
Turbo pumps are alsoavailable as sets
(Turbo pump, cylinder, gauge, couplersand hose) for your ordering convenience.
Page: 50
TURBO
® 85
Turbo Air Hydraulic Pumps
Weight
(kg)
157201157201
ModelNumber
PAT-1102NPAT-1105NPAM-1402NPAM-1405N
208216272282
229229229229
101101101101
––
3636
128137129139
137146152160
38833883
112120112120
347437315405
6,49,17,3
10,0
306396306396
A B C D E F H J K L M
PATPAMSeries
Reservoir Capacity:
2,5 and 5,0 litresFlow at Rated Pressure:
0,13 l/minAir Consumption:
340 l/minMaximum Operating Pressure:
700 bar
H
C
LJ
1/4"-18NPT
DK
3/8"-18NPT
34
5
AM
F E B
3/8"-18NPT1 2
H
C
LJ
1/4"-18NPT
DK
3/8"-18NPT 3
4
5
RE
LEA
SE
PR
ES
S
AM
E B
1 2 3/8"-18NPT
Dimensions (mm)
Turbo Air Pump (@ 6,9 bar)
a Filtered ‘Permanent’ TankVent
b Return-to-Tank/ Auxiliary Vent / Fill Tank Port
c Hydraulic Output
d Swivel Air Input with Filter
e 4 Mounting Holes for #10 thread formingscrew.Max. depth into reservoir = 19 mm
PAT-1102N and PAT-1105N PAM-1402N and PAM-1405N
700 1,1 0,13 Advance/Hold/Retract
PressureRating
(bar)
Valve Function
Output Flow Rate
(l/min)
Air Pressure
Range
(bar)
79
SoundLevel
(dBA)
340
Air Con-
sumption
(l/min)
2,7-10,3
No load Load
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
The PAT-models use afoot or hand operatedtreadle to control airand valve functions.
The PAM-models use atreadle with a locking feature,controlling a standard VM-4valve.
86
®
Hydraulic Technology WorldwideAir Hydraulic Pumps
• Rugged construction—built for long life and easy service• Swivel coupling simplifies hydraulic connection and pump
operation• Three-position treadle provides cylinder advance, hold or
retract operation • Operates in all positions for increased versatility in use and
mounting (except PA-1150)• Base mounting slots provided on PA-133
H Shown from top to bottom: PA-1150, PA-133
Reservoir Capacity:
0,6-1,3 litresFlow at Rated Pressure:
0,13 l/minAir Consumption:
255 l/minMaximum Operating Pressure:
700 bar
PC-66 ReservoirConversion Kit
Double the reservoircapacity of your existing PA-133 with this easy toinstall conversion kit.
PASeries
Used with
Cylinder
Usable Oil
Capacity(cm3)
ModelNumber
PressureRating
(bar)
Output Flow Rate
(l/min)
Valve Function Air PressureRange*
(bar)
Air Consump-
tion(l/min)
SoundLevel
(dBA)
Weight
(kg)
58911791311
700700700
0,650,650,65
0,130,130,13
Advance/Hold/RetractAdvance/Hold/RetractAdvance/Hold/Retract
2,7-6,92,7-6,92,7-6,9
255255255
858585
5,47,38,2
PA-133PA-166PA-1150
Single-Acting
No load Load
PA-133, PA-166 (mm) PA-1150 (mm)
Air Input Hydraulic Output
Fill Tank Port Fill Tank Port
Air Input
HydraulicOutput
* Recommended Regulator-Filter-Lubricator: RFL-102
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) EAir pressure:
PA Series (@ 6,9 bar)
® 87
10 Series, Air Hydraulic Pumps
• Twin air motor configuration delivers high-flow performancein first stage, up to 4 bar, for rapid cylinder advance
• 4 and 8 litres reservoirs for use with a wide range ofcylinders
• Integral shroud or optional roll bars protect air motors andprovide easy carry
H Shown: PAM-1041
Reservoir Capacity:
4,0-8,0 litresFlow at Rated Pressure:
0,15 l/minAir Consumption:
510 l/minMaximum Operating Pressure:
700 bar
Locking Valves
Pumps with VM-4 manualvalves are available with VM-4L manual lockingvalves instead. Add suffix“L” to pump model number.
Page: 122
VA-2 Remote Valve
For remote operation ofPAM-10 series air pumps.Permits either hand or footoperation.
PAMSeries
Single-Acting
Double-Acting
2,67,62,67,6
10,6510,6510,6510,65
700700700700
0,150,150,150,15
2,7-6,92,7-6,92,7-6,92,7-6,9
510510510510
87878787
22,727,222,727,2
Adv./Hold/Retr.Adv./Hold/Retr.Adv./Hold/Retr.Adv./Hold/Retr.
VM-2VM-2VM-4VM-4
PAM-1021PAM-1022PAM-1041PAM-1042
EAM-1021EAM-1022EAM-1041EAM-1042
Used with
Cylinder
UsableOil
Cap.(litres)
ModelNumberwithShroud
ModelNumberwithRoll Bars
PressureRating
(bar)
Output Flow Rate
(l/min)
Valve Function ValveModel
Air PressureRange*
(bar)
Air Con-sump-
tion(l/min)
SoundLevel
(dBA)
Weight
(kg)1st stage 2nd stage
HydraulicOutput
On/Off Air Valve
4 Li
tres
8 Li
tres
Air Input
* Recommended Regulator-Filter-Lubricator: RFL-102
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
10 Series (@ 6,9 bar)
PAM-Series (mm)
88
®
Hydraulic Technology Worldwide
* See Valve Section for technical information.
Air Hydraulic Pumps
• Available as two-stage model for reduced cycle times andimproved productivity
• 70-700 bar user adjustable pressure relief valve for pre-setting maximum system pressure
• Oil level indicator allows quick and easy oil levelmonitoring
Power LargeHydraulic Jobs withCompressed Air
H Shown: PAM-2208
PFC-25 Oil Filter Kit
The oil filter kit is easilyinstalled to the Air HydraulicPump, providing 25-micronfiltration for continuous duty applications.
Page: 78
Roll Bars
To protect your Air HydraulicPump when used in harshenvironments, Roll Bars areavailable.
RFL-102 Regulator-Filter-Lubricator
Recommended for use withall air pumps. Providesclean, lubricated air and
allows for air pressure adjustment. Steelbowl guards are standard.
F This Air HydraulicPump has beenmodified tooperate in aunique testingenvironment.
Single Stage or TwoStage
Choose Single Stageoperated pumps, for applicationsthat require constant flowregardless of pressure, such astesting or clamping.
Two Stage operated pumps have an increased output flow(appr.10x higher) at pressuresbelow 65 bar. This allows fastplunger movement towards theload, for reduced cycle timesend increased productivity.
Page: 78
UsableOil
Cap.
(litres)
Valve*ModelNumber
Valve Function
PAN-Series without valve• Ideal for matching your valving to your
system requirements.
PAM-Series with manual valve• Ideal for most applications• Manual valve control for both single
and double-acting cylinders
2 BASIC PUMP CONFIGURATIONS
Select your pump model here. For special requirements see the ordering matrix.
Used withCylinder
•••
•••••
••
••••
–––
VM-2VM-4VM-2
VM-3L
5,07,5
20,05,05,07,5
40,0
24––
26–
29–
–2843–
273065
Page: 89
Single Stage–
1,2 l/min at 700 bar
Model Number
PAN-2005S––
PAM-2205S–
PAM-2208S–
–PAN-2008PAN-2020
–PAM-2405PAM-2208PAM-2640
Weight (kg)
Two Stage10,8 l/min at 65 bar1,2 l/min at 700 bar
Model Number
Weight(kg)
® 89
Air Hydraulic Pumps
PAN/PAMSeries
Reservoir Capacity:
5, 8, 20 and 40 litresFlow at Rated Pressure:
1,2 l/minAir Consumption:
2400 l/minMotor Size:
2,2 kWMaximum Operating Pressure:
700 bar
F
D
H
B
3/8"-18NPT
4 x ø7
R 1/2"
2525
CAE E
16 x ø75010
CUSTOM BUILD YOUR AIR HYDRAULIC PUMP
If the Air Hydraulic pump thatwould best fit your applicationcannot be found in the charts, here you can easily build yourcustom pump.
1Product
Type
2MotorType
3Valve
Opera-tion
4PumpSeries
5ValveType
6ReservoirCapacity
7Options
1 Product Type
P = Pump
2 Motor Type
A = Air Motor
3 Valve Operation
M= ManualN = No Valve
4 Pump Series
2 = 1,2 l/min (2,2 kW)
6 Reservoir Capacity
05 = 5 litres08 = 8 litres20 = 20 litres40 = 40 litres
7 Options
blanc = Two stageS = Single stageV = Viton Seals
5 Valve Type
0 = No Valve2 = 3-way, 2-position
(VM-2)3 = 3-way, 3-position
(VM-3) 4 = 4-way, 3-position
(VM-4) 6 = 3-way, 3-position,
Locking (VM-3L)8 = 4-way, 3-position,
Locking (VM-4L)
Example: PAM-2208
The PAM-2208 is an air operated,two stage hydraulic pump with a 3-way, 2-position manual valve andan 8 litres reservoir.
Ordering Example
P A M - 2 4 08 S .
100 200 300 400 500 600 70000
2,0
4,0
6,0
8,0
10,0
FLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) EPAM-2000SPAM-2000at 7 bar air pressure
Air Inlet
AirPressure
Range
(bar)
4-74-74-74-74-74-74-7
AirConsumption
(l/min)
2400240024002400240024002400
SoundLevel
(dBA)
80-8580-8580-8580-8580-8580-8580-85
ReservoirSize
(litres) A B C D E F H
582040
304304460460
205205340340
335335
––
159191191320
––
5050
165165295295
335367367496
Pump Dimensions (mm)
H This is how an Air Hydraulic Pump model number is built up:
90
®
Hydraulic Technology Worldwide
H Shown from left to right: PGM-3410R, PGM-2408R, PGM-5410R
Atlas Series, Gasoline Pumps
• Patented Genesis Technology means- coaxial piston design ensures high performance- first-stage piston pump for improved efficiency
• High by-pass pressures improve productivity• All Atlas pumps feature sturdy Roll Cages for use in tough
environments• 4, 8, 20 and 40 litres reservoirs for use with a wide range
of cylinders• Available in three four-cycle motor sizes: 1,8, 3,7 and 4,0 kW
Featuring GenesisTechnology
3,83,87,67,69,5
18,99,5
18,99,5
18,99,5
18,937,8
700700700700700700700700700700700700700
Single-ActingDouble-Acting
Single-Acting
Double-Acting
Single-Acting
Double-Acting
Single-ActingDouble-Acting
Usable Oil
Capacity(litres)
Used with Cylinder
PressureRating
(bar)
Output Flow Rate
(l/min)
ModelNumber
PGM-2308R*PGM-2408R*PGM-3310RPGM-3320RPGM-3410RPGM-3420RPGM-5310RPGM-5320RPGM-5410RPGM-5420RPGM-5440R
PGM-2304R*PGM-2404R*
3,23,23,23,27,87,87,87,87,87,87,87,87,8
0,660,660,660,660,900,900,900,901,61,61,61,61,6
H This PGM-5310R is used to power a hydraulic re-bar cutter on a construction site before powerwas available.
1st stage 2nd stage
Hoses:
Enerpac offers a completeline of high quality hydraulichoses. To ensure theintegrity of your system,
specify only Enerpac hydraulic hoses.
Page: 106
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
* Note: The PGM-20 series are available with a carrying handle instead of a rollcage. Forordering omitt the ‘R’ from the model number
® 91
Atlas Gasoline PumpPerformance
Elevation can affect theperformance of any gasoline engine. Atlas pumps are designed to developrated performance at elevations up to1500 m.
For applications above this elevation,please consult your Enerpac office.
Atlas Series, Gasoline Pumps
By-PassPressure
(bar)
Valve Type Valve Function Motor Size
(kW)
SoundLevel
(dBA)
Weight
(kg)
3-way, 3-position4-way, 3-position3-way, 3-position4-way, 3-position3-way, 3-position3-way, 3-position4-way, 3-position4-way, 3-position3-way, 3-position3-way, 3-position4-way, 3-position4-way, 3-position4-way, 3-position
Advance/Hold/Retract
Advance/Hold/Retract
Advance/Hold/Retract
Advance/Hold/Retract
89898989939393939393939393
1,8
1,8
3,7
4,0
25253333404040404884488493
PGMSeries
Reservoir Capacity:
4, 8, 20 and 40 litresFlow at Rated Pressure:
0,66-1,6 l/minMotor Size:
1,8- 4,0 kWMaximum Operating Pressure:
700 bar
3/8"-18NPT
558 444
3/8"-18NPT
558 444
571
Speed Chart
See the Enerpac Cylinder SpeedChart in our ‘Yellow Pages’ section.
Page: 103
M
PGM-20 series
PGM-30 and PGM-50 seriesFLOW CHART
Oil
flow
(l/m
in)
E
Pressure (bar) E
20 Series Atlas30 Series Atlas50 Series Atlas
140140140140140140140140140140140140140
571
(8 a
nd 2
0 lit
res)
863
(40
litre
s)
92
®
Hydraulic Technology Worldwide800 Series, Gasoline Pumps
H Shown: EGM-8418
Locking Valves
Pumps with VM-4 manualvalves are available with VM-4L manual valves.Add suffix “L” to pumpmodel number.
Page: 122
Reservoir Capacity:
95 litresFlow at Rated Pressure:
5,7 l/minMotor Size:
13,2 kWMaximum Operating Pressure:
700 bar
EGMSeries
M
• Industrial grade, 13,2 kW, twin-cylinder motor• Panel mounted pressure gauge and adjustable relief valve
for system pressure control• Two-speed pump design, with high by-pass pressure, for
rapid cylinder advance• Built in oil temperature and oil level gauge• External adjustable relief valve (80-700 bar) allows control
of operating pressure without opening the pump• Integral priming circuit guarantees quick starts after
transport
Single-ActingDouble-Acting
6868
700700
12,812,8
5,75,7
250250
403403
9494
Adv./Retr.Adv./Hold/Retr.
3-way, 2-pos.4-way, 3-pos.
EGM-8218EGM-8418
Usable Oil
Capacity(litres)
Used with Cylinder
PressureRating
(bar)
By-PassPressure
(bar)
Valve Type Valve Function SoundLevel
(dBA)
Weight
(kg)
Output Flow Rate
(l/min)
ModelNumber
1st stage 2nd stage
565
1168
990
Top View
ValveLocation
Relief Valve
Fill Port
Gauge Shut Off Valve
Drain Plug
Oil Level andTemperature GaugeGauge 700 bar
Priming Pump
FLOW CHARTO
il flo
w (l
/min
) E
Pressure (bar) E
800 Series
iii???
!!!93®
Yellow Pages Overview
94-95 E
96-97 E
98-99 E
100-101 E
102-103 E
104 E
✗
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
5 ton 30 ton 50 ton 75 ton
oad
NoLoad
NoLoad
NoLoad
LoadLoad
LoadLoad
1,3
14
44
10
2,8
26
4,1
43
0,8
1,4
4,1
1,4
2,8
2,8
4,1
4,1
11
35
8,1
2,2
20
3,3
34
6 0
1,1
3,2
1,1
2,2
2,2
3,3
3,3
6,0
6,3
20
4,8
1,3
12
1,9
20
3,6
0,6
1,9
0,6
1,3
1,3
1,9
1,9
3,6
4,4
14
3,3
0,9
8,3
1,3
14
2,5
0,4
1,3
0,
00
vel
Not recommended
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
PageSection
Safety Instructions
Pump Selection and
Selection Worksheet
Basic System
Set-ups
Basic Hydraulics
Conversion Tables
and Speed Charts
Valve Information
If selecting hydraulic equipment is not your
daily routine, then you will appreciate these
pages. The ‘Yellow Pages’ are designed to help
you work with hydraulics. They will help you to
better understand the basics of hydraulics, of
system set-ups and of the most commonly used
hydraulic techniques. The better your choice of
equipment, the better you will appreciate
hydraulics. Take the time to go through these
‘Yellow Pages’ and you will benefit even more
from Enerpac High Pressure Hydraulics.
T
A
Enerpacworked
hard to earn the qualityrating ISO 9001, in itsongoing pursuit ofexcellence.
ANSI B30.1
Our cylinders fullycomply with the criteriaset forth by theAmerican NationalStandards Institute(except ‘BRD’ and ‘CL’series).
UL approved
All electricalcomponents used onEnerpac products carrythe UL rating whenpossible.
IP 55F
All electric motors usedon Enerpac powerpumps meet thisprotection andinsulation classification.
DIN 20024
Enerpac thermoplastichoses are related to thecriteria set forth inDeutsche IndustrieNorm 20024.
CanadianStandardsAssociation
Where specified,Enerpac electric pumpassemblies meet thedesign, assembly andtest requirements of theCanadian StandardsAssociation.
Product DesignCriteria
All hydrauliccomponents aredesigned and tested tobe safe for use atmaximum 700 bar pressure unlessotherwise specificallynoted.
EMC Directive89/336/EEC
Where specified,Enerpac electric powerpumps meet therequirements forElectromagneticCompatibility per EMCDirective 89/336/EEC.
WorldStandardGuarantee
All Enerpac productsare guaranteed againstdefects in workmanshipand materials for aslong as you own them.
CE Marking & Conformity
Enerpacprovides a Declarationof Conformity and CEmarking for productsthat conform with theEuropean CommunityDirectives.
Enerpac ‘Yellow Pages’stand for
Hydraulic Information!
Enerpac is certified for several quality standards. Thesestandards require compliance with standards formanagement, administration, product development andmanufacturing.
Lifetime guaranteeEnerpac guarantees that Enerpac’s products will befree from defects in materials and workmanship foras long as they are owned by the Customer. Thisguarantee does not cover ordinary wear and tear,abuse, improper use (including repairs or attemptedrepairs other than by Enerpac or its authorizedservice representatives), alterations or productswhich have not been used or maintained inaccordance with Enerpac’s written instructions.
The foregoing warranty is exclusive and is in lieu ofall other express and implied warranties, includingbut not limited to implied warranties or merchan-tability and fitness for a particular purpose.
Enerpac, at its option, will authorize its authorizedservice representatives to repair or replace, orrefund the purchase price of, any products (or partsthereof) which are covered by this guarantee andwhich are found to be defective. If a claim arises,the Customer must contact Enerpac to arrangereturn shipment to Enerpac.
The remedy of repair, replacement of refund iscustomer’s exclusive remedy in the event of breachof this guarantee. Enerpac shall not be liable for anyincidental, consequential or special damages or forany loss, damage or expense arising from the sale,use or installation of the products or from any othercause whatsoever.
®
Hydraulic Technology Worldwide
94
Safety Instructions
������������yyyyzzzz{{||
Hydraulic power is one of thesafest methods of applyingforce to your work - when usedcorrectly. And to that end weoffer some DOs and DON’Ts,simple common sense pointswhich apply to practically allEnerpac hydraulic products.
The line drawings and applicationphoto’s of Enerpac productsthroughout this catalog are usedto portray how some of our
customers have used hydraulicsin industry. In designing similarsystems, care must be taken toselect the proper componentsthat provide safe operation and fityour needs. Check to see if allsafety measures have been takento avoid the risk of injury andproperty damage from yourapplication or system. Enerpaccan not be hold responsible fordamage or injury, caused by un-safe use, maintenance or
application of its products. Pleasecontact the Enerpac office or arepresentative for guidance whenyou are in doubt as to the propersafety precautions to be taken indesigning and setting up yourparticular system.In addition to these tips, everyEnerpac product comes withinstructions spelling out specificsafety information. Please readthem carefully.
✗ ✓ ✗ ✓
✗ ✓ ✗ ✓
✗ ✓
�y
✗ ✓
✗ ✓✗ ✓
��yy
✗ ✓ ✗ ✓
F Provide a leveland solid support for theentire jack basearea.
Jacks
Cylinders
F Never place anypart of your bodyunder the load.Ensure the load ison a solid support beforeventuring under.
F Provide a solidsupport for theentire cylinderbase area. Usecylinder baseattachment formore stability.
F Do not use cylinderwithout saddle.This will causeplunger to”mushroom”.Saddles distributeload evenly on theplunger.
F Always protectcylinder threadsfor use withattachments.
F The entire jacksaddle must be incontact with theload. Movementof the load to bein the samedirection as jackplunger.
F Remove the jackhandle when it isnot being used.
F The entire cylindersaddle must be incontact with theload. Movement ofthe cylinder must beparallel with themovement of theload.
F As with jacks,never place anypart of your bodyunder the load.Load must be oncribbing beforeventuring under.
F Keep hydraulicequipment awayfrom open fire andtempertures above65 °C (150 °F).
95®
Safety Instructions
����yyyy
����yz{|
��z|
Manufacturer’s rating of load and stroke are maximum safe limits.Good practice encourages using only 80% of these ratings!80% 80%
✗ ✓ ✗ ✓
✗ ✓
������yyyyyy
������yyyyyy
✗ ✓ ✗ ✓
��yy
✗ ✓✗ ✓
HYDRAULIC OIL
MAX. MAX.
HYDRAULIC OIL
✗ ✓
Willy
™
Brake Fluid
HYDRAULIC OIL
✗ ✓
F Don’t use handleextenders.Hand pumpsshould be easy tooperate whenused correctly.
Pumps
Hoses and couplers
F Fill pump only torecommendedlevel. Fill onlywhen connectedcylinder is fullyretracted.
F Clean bothcoupler partsbeforeconnecting.Use dust capswhen couplerparts are notconnected.
F Keep hoses awayfrom the areabeneath loads.
F Don’t lift hydraulic equipment by thehoses.
F Close release valvefinger tight. Usingforce will ruin thevalve.
F Use only genuineEnerpac hydraulicoil. Wrong fluid candestroy seals andpump and will renderyour warranty nulland void yourguarantee.
F Don’t kink hoses.Bending radiusshould be at least115 millimetres.Don’t drive over ordrop heavy objectson hoses.
• Lift slowly and check often
• Avoid standing in the line of force
• Anticipate possible problems and take steps to avoid them
✓ ✗ ✓F Always readinstructions andsafety warningsthat come withyour Enerpachydraulicequipment.
F Don’t override thefactory setting ofrelief valves. Always use agauge to checksystem pressure.
General
R=115 mm
F Detach cylinderonly when fullyretracted or useshut-off valves orsafety valves tolock-in cylinderpressure
< 25 mm25 mm50 mm75 mm
100 mm125 mm150 mm175 mm200 mm225 mm250 mm300 mm325 mm350 mm
®
Hydraulic Technology Worldwide
96
Pump Selection
Flow*
Usable Oil Capacity
Duty Cycle**
Portable/Stationary***
Recommended Series
5 t 10 t 15 t 25 t 30 t 50 t 60 t 75 t 100 t 150 tH Stroke
Capacity (ton) E
Low (0,1 - 0,3 l/min)
Intermittent
Portable Portable
Economy Submerged Titan Hushh 8000/9000 Series
Stationary Stationary Stationary
Continuous ContinuousIntermittent Both
1,9 - 3,8 litres 5,7 litres 5 - 40 litres5 - 38 litres 60 litres
Medium (0,5 -2,0 l/min)
High (2,0 - 14,5 l/min)
* Flow • Determined by motor size• Directly affects electrical power requirements• Determines cylinder or tool speed
** Duty Cycle • Continuous would be applications requiring more than one hour of continuous pump use• Intermittent would be used less than one hour of continuous pump use
*** Portability Portable Stationary• Ergonomic handles • Mounting options• Flexible power requirements • Normally requires stable power
Note: Selection based on oil capacity requirements of cylinders.
H HAND PUMP AND SINGLE-ACTING CYLINDER MATCHING CHART
H POWER PUMP SELECTION CHART
Page: 80Page: 74Page: 66Page: 70Page: 64
P-392 P-80 P-462
Page: 56Page: 56Page: 54
97®
Selection Worksheet
Question: Tips/help Data Model Number
Total force required in tons: Total loadNumber of cylinders required: Number of lifting pointsForce per cylinder in ton: Should be 80% of total cylinder cap.Stroke required: Plunger travelSingle or double-acting (D/A): D/A used when pull force is required,
or retract speed is criticalType of plunger required: Hollow or solidCollapsed height required:Optional saddle required: Tilt, Grooved, Flat Cylinder base: Improves stabilityCylinder attachments: (RC-series) Expanded functions
Selected cylinder model: EIncluding coupler model:
Available power source: n Manual n Electric n Compressed Air n Petrol
Hand pump Not for high cycle applicationsSingle or double acting operation Use 4-way valve for D/A applications
Check speed chart on page 103 for number of mm per stroke)Selected hand pump: E
Electric or Compressed Air pumpNeed for portability:Duty cycle: Intermittent or highRequired usable oil capacity: Intermittent =1,2 x oil capacity
high cycle = 2 x oil capacityAvailable Voltage:Lifting speed (Important/not important): Use speed chart on page 103Type of control: Manual/remote pendantType of actuation/function: Advance/hold/retractAccessories: Roll bar, Caster kit, ...
Selected pump: EIncluding Coupler: Oil connection
Number of hoses and length required:Selected Hoses: E
Manifold or tee: EExtra hose per manifold (2): EGauge (ton, kN or bar scale): Glycerine for high cycle EGauge adapter: EFittings: EPressure Relief Safety Valve: ELoad-holding Valve(s): EHydraulic oil: E
CylinderSelection
H Complete the following information to select the right products:
PumpSelectionThe three mostcommonlyselectedpumps arehand pumps,electric pumpsand air-drivenpumps. Battery andgas poweredpumps, how-ever can beselected in thesame way.
SystemComponents
®
Hydraulic Technology Worldwide
98
Basic System Set-ups
7
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
3 8
413 1
4
1011
M1 Cylinder Applies hydraulic force.Page 7
M2 Cylinder Base PlateFor applications like liftingwhere additional cylinder stability is required. Page 12
M3 PumpProvides hydraulic flow. Page 53
M4 HoseTransports hydraulic fluid.Page 106-107
M5 Male CouplerFor quick connection of thehose to system components.Page 108-109
M6 Female CouplerFor quick connection of thehose end to the system components.Page 108-109
M7 GaugeTo monitor pressure of thehydraulic circuit.Page 112-118
M8 Gauge adaptorFor quick and easy gaugeinstallation. Page 118
M9 Swivel connectorAllows proper allignment ofvalves and/or gauges. Usedwhen units being connectedcannot be rotated.Page 118
M10 Auto-Damper Valve V-10Used to protect gauge fromdamage due to suddenpressure pulses in the system.Needs no adjustment andallows correct positioning ofgauge, prior to tightening. Page 125
M11 4-Way Directional Control ValveControls the direction ofhydraulic fluid in a double-acting system.Page 122
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
7
9
3 8 4
5 1
6
Single-acting push application, such as in a press. The handpump offers controlled cylinder advance, but mayrequire many handpump strokes in longer stroke applicationswhen the cylinder capacity is 25 ton or above.
Examples of pump, hose and cylinder sets can be found onpage 50.
Single-acting cylinder with longer strokeused for lifting applications.
Double-acting cylinder set-up used for liftingapplications where a slow controlled descentof the load must be maintained.
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
7
9
6
3 8
4
2
1
99®
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
3 15
14 8
12
7
10 4
4 13 1
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
4
7
11
3
10
6
114
14481
15 4
Basic System Set-ups
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
15 14 8 4
7
8
10
7
2
13
1
4
12 3
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
Two point lifting set-up using single-acting cylinders.
Four point lifting set-up, using single-acting cylinders anddirectional control valves.
M12 3-Way Directional Control ValveControls the direction of hydraulic fluid in a single-acting system.Page 120
M13 Safety Holding ValveControls load descent in lifting applications.Page 124-125
M14 ManifoldAllows distribution of hydraulic fluid from one powersource to several cylindersPage 110
M15 Needle valveRegulates the flow of hydraulic fluid to or from the cylinders.Page 124-125
Double-acting cylinder set-up used in a push/pull application.
®
Hydraulic Technology Worldwide
100
Basic Hydraulics
Flow Pressure
Pascal’sLaw
A hydraulic pump produces flow. Pressure occurs when there isresistance to flow.
Pressure applied at any pointupon a confined liquid istransmitted undiminished in alldirections (Fig.1).This means that when morethan one hydraulic cylinder isbeing used, each cylinder willlift at its own rate, dependingon the force required to movethe load at that point (Fig. 2).
Cylinders with the lightest loadwill move first, and cylinderswith the heaviest load will movelast (Load A), be it the cylindershave the same capacity.
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
To have all cylinders operateuniformly so that the load isbeing lifted at the same rate ateach point, either controlvalves (see Valve section) orSynchronous Lift Systemcomponents (see Cylindersection) must be added to thesystem (Load B).
Gauge
Pump
Load A
Load B
Synchronous Lift or Control Valves to provide uniform lifting of load.
Manifold
Figure 2
Figure 1
Cylinder
CAUTION!
When lifting or pressing,always use a gauge. A gauge is your ‘window’ to
the system. It lets you see what’s goingon. You will find the gauges in theSystem Components section.
Page: 105
101®
Basic Hydraulics
Use this formula to determineeither force, pressure oreffective area if two of thevariables are known.
Force The amount of force a hydrauliccylinder can generate is equalto the hydraulic pressure timesthe “effective area” of thecylinder (see cylinder selectioncharts).
HydraulicWorkingPressure
x=CylinderEffective
AreaForce
P x= AF
Example 1An RC-106 cylinder with 14,5 cm2 effective area operating at 700 bar will generate what force?Force = 7000 N/cm2 x 14,5 cm2 =101500 N = 101,5 kN
Example 2An RC-106 cylinder lifting 7000 kg will require what pressure?Pressure = 7000 x 9,8 N ÷ 14,5 cm2 = 4731,0 N/cm2 = 473 bar.
Example 3An RC-256 cylinder is required to produce a force of 190.000 N. Whatpressure is required? Pressure = 190.000 N ÷ 33,2 cm2 = 5722,9 N/cm2 = 572 bar.
Example 4Four RC-308 cylinders are required to produce a force of 800.000 N.What pressure is required? Pressure = 800.000 N ÷ (4 x 42,1 cm2) = 4750,6 N/cm2 = 476 bar.Remember, since four cylinders are used together, the area for onecylinder must be multiplied by the number of cylinders used.
Example 5A CLL-2506 cylinder is going to be used with a power source that iscapable of 500 bar. What is the theoretical force available from thatcylinder?Force = 500 N/cm2 x 366,4 cm2 = 1.832.000 N = 1832 kN.
Plunger
Force (Load)
Stroke
EffectiveArea
Cylinder OilCapacity
The volume of oil required for a cylinder (cylinder oilcapacity) is equal to theeffective area of the cylindertimes the stroke*.
* Note: these are theoretical examples and do not take intoaccount the compressibility ofoil under high pressure.
x=Cylinder
Oil Capacity
CylinderEffective
Area
CylinderStroke
Example 1:An RC-158 cylinder with 20,3 cm2 effective areaand 200 mm stroke requires what volume of oil?Oil Capacity = 20,3 cm2 x 20 cm = 406 cm3
Example 2:An RC-5013 cylinder has an effective area of 71,2 cm2 and a stroke of 320 mm. How much oil will be required?Oil Capacity = 71,2 cm2 x 32 cm = 2278,4 cm3
Example 3: An RC-10010 cylinder has an effective area of 133,3 cm2 and a stroke of 260 mm. How much oil will it require?Oil Capacity = 133,3 cm2 x 26 cm = 3466 cm3
Example 4: Four RC-308 cylinders are being used, each with an effective area of42,1 cm2 and a stroke of 210 mm. How much oil will be required?Oil Capacity = 42,1 cm2 x 21 cm = 884 cm3 for one cylinderMultiply by four to obtain the required capacity: 3536 cm3
Stroke
OilCapacity
CAUTION!
Enerpac oil will compress2.28% at 350 bar and 4.1% at 700 bar.
Page: 110
®
Hydraulic Technology Worldwide
102
Conversion Tables
Pressure:
1 psi = 0,069 bar1 bar = 14,50 psi
= 9,8 N/cm2
1 kPa = 0,145 psi
Volume:
1 in3 = 16,387 cm3
1 cm3 = 0,061 in3
1 litre = 61,02 in3
= 0,264 gal1 USgal = 3785 cm3
= 3,785 l= 231 in3
Weight:
1 pound (lb) = 0,4536 kg1 kg = 2,205 lbs1 metric ton= 2205 lbs
= 1000 kg1 ton (short) = 2000 lbs
= 907,18 kg
Temperature:
To Convert °C to °F:T°F = (T°C x 1,8) + 32To Convert °F to °C:T°
C = (T°F – 32) ÷ 1,8
Other measurements:
1 in = 25,4 mm1 mm = 0,039 in1 in2 = 6,452 cm2
1 cm2 = 0,155 in2
1 hp = 0,735 kW1 kW = 1,359 hp
All capacities andmeasurements in the catalogare expressed in uniformvalues.The conversion chartprovides helpful informationfor their translation intoequivalent systems.
All ton values specified in thiscatalogue are metric tonnesand are for cylinder classidentification only. Please refer to the kN datafor calculations.
A = Collapsed heightB = Extended heightC = Cylinder body lengthD = Cylinder outside
diameterD1 = Cylinder widthE = Cylinder inside
diameterF = Plunger rod diameterG = Oil inlet threadH = Cylinder bottom to
advance portI = Cylinder top to retract
portJ = Saddle outside dia-
meterK = Cylinder rod protrusion
at collapsed heightL = Plunger centre to side
of base
M = Mounting holes to plunger centre
N = Length of smaller cylinder part
O = Plunger hole or threadof saddle
P = Plunger thread lengthQ = Plunger outside threadU = Bolt circle diameter of
mounting holesV = Thread of cylinder
mounting holesW = Collar thread X = Collar thread lengthY = Centre hole diameterZ = Internal base threadZ1 = Depth of internal base
thread
Dimensions shown in theSelection Charts of thecylinder section are identifiedon the relevant drawings bythe capital letter referenceslisted here: A for collapsedheight through Z1 for depthof internal base thread.
Key to cylinder dimensions
Key to measurements
Z
X
A
B
K
G
NH
X1
I
C
F
P
OJW
E
W
Y
V
U DM
Imperial to metric
1/161/8
3/161/4
5/163/87/161/2
9/165/8
11/163/4
13/167/8
15/16
1
Inches Decimal mm1,593,184,766,357,949,53
11,1112,7014,2915,8817,4619,0520,6422,2323,8125,40
.06
.13
.19
.25
.31
.38
.44
.50.56.63.69.75.81.88.94
1.00
103®
Cylinder Speed Charts
Cyl. Capacity E
Cyl. Capacity E
5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoadLoad Load Load Load Load Load Load Load
3,9
17,6
25,3
61,4
197
3,9
3,9
3,8
3,9
7,4
1,7
7,8
11,2
27,1
87,1
1,7
1,7
1,7
1,7
3,3
1,2
5,5
7,9
19,3
61,8
1,2
1,2
1,2
1,2
2,3
0,7
3,4
4,9
11,8
37,9
0,6
2,6
3,7
9,0
29,0
0,7
0,7
0,7
0,7
1,4
0,6
0,6
0,6
0,6
1,1
0,3
1,6
2,3
5,5
17,7
0,3
0,3
0,3
0,3
0,7
0,2
1,0
1,5
3,5
11,4
0,2
0,2
0,2
0,2
0,4
0,2
0,8
1,1
2,8
8,8
0,2
0,2
0,2
0,2
0,3
P-391 54P-392 54P-80/801/84 56P-802/842 54P-462/464 56
ManualPump Type Page
5 ton 10 ton 15 ton 25 ton 30 ton 50 ton 75 ton 100 ton
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoad
NoLoadLoad Load Load Load Load Load Load Load
6,8
86
273
53
14
133
21
221
40
221
434
28
17
277
31
281
85
205
205
334
4,3
8,3
26
7,1
14
14
21
21
40
40
197
3,4
3,4
3,8
31
31
17
23
43
148
3,0
38
122
24
6,4
59
9,0
98
18
98
193
12
7,6
123
14
125
38
91
91
148
1,9
3,7
11
3,2
6,4
6,4
9,0
9,0
18
18
88
1,5
1,5
1,7
14
14
7,6
10
19
66
2,1
27
86
17
4,5
42
6,7
70
13
70
137
8,8
5,4
88
9,9
89
27
65
65
105
1,3
2,6
8,1
2,2
4,5
4,5
6,7
6,7
13
13
62
1,1
1,1
1,2
9,9
9,9
5,4
7,4
13
47
1,3
17
53
10
2,8
26
4,1
43
7,6
43
84
5,3
3,3
53
6,0
54
16
39
39
64
0,8
1,6
4,9
1,4
2,8
2,8
4,1
4,1
7,6
7,6
38
0,7
0,7
0,7
6,0
6,0
3,3
4,5
8,2
29
1,0
13
42
8,1
2,2
20
3,3
34
6,0
43
66
4,2
2,6
42
4,8
43
13
31
31
51
0,7
1,3
3,9
1,1
2,2
2,2
3,3
3,3
6,0
6,0
30
0,5
0,5
0,6
4,8
4,8
2,6
3,6
6,5
23
0,6
7,7
25
4,8
1,3
12
1,9
20
3,6
20
39
2,5
1,5
25
2,8
25
7,7
18
18
30
0,4
0,7
2,3
0,6
1,3
1,3
1,9
1,9
3,6
3,6
18
0,3
0,3
0,3
2,8
2,8
1,5
2,1
3,8
14
0,4
5,4
17
3,3
0,9
8,3
1,3
14
2,5
14
27
1,7
1,1
17
1,9
18
5,3
13
13
21
0,3
0,5
1,6
0,4
0,9
0,9
1,3
1,3
2,5
2,5
12
0,2
0,2
0,2
1,9
1,9
1,1
1,5
2,7
9,2
0,3
4,1
13
2,6
0,7
6,4
1,0
11
1,9
11
21
1,3
0,8
13
1,5
14
4,1
9,8
9,8
16
0,2
0,4
1,2
0,3
0,7
0,7
1,0
1,0
1,9
1,9
9,5
0,2
0,2
0,2
1,5
1,5
0,8
1,1
2,0
7,1
WalkPac™ 62Economy 64Titan 66Submerged 702000WS Serie 742000W Serie 743000WS Serie 743000W Serie 745000WS Serie 745000W Serie 748000/9000 Serie 80Turbo 84PA Serie 8610 Serie 872000S Serie 882000 Serie 88Atlas 20 Serie 90Atlas 30 Serie 90Atlas 50 Serie 90800 Serie 92
BatteryElectric(speed basedon 50 Hz)
Air(speed basedon 6,9 bar airpressure)
Petrol
Pump Type Page
No Load indicates the plungerspeed as the plunger extendstowards the load (1st stage).
Load indicates the plunger speedas the load is lifted at a systempressure of 700 bar (2nd stage).
Millimetres of Cylinder Plunger Travel per Hand Pump Plunger Stroke
Millimetres per Second of Cylinder Plunger Travel
H PowerSource
H PowerSource
Pump Oil Flow (cm3/min) x 10
Cylinder Effective Area (cm2) x 60
Example: At what speed (V) will the RC-308 (30 ton) cylinder movewhen powered by a 2000W Serie Hushh pump?
RC-308 Cylinder Effective Area = 42,1 cm2
2000W Serie pump oil Flow (no load) = 5100 cm3/min
Speed V =5100 cm3/min x 10
= 20,2 mm/sec42,1 x 60
To determine:
Cylinder plunger speed
An RC-308 cylinder (30 ton) is powered by a 2000W Serie Hushh pump. While lifting the load,the cylinder plunger travels at 2,2 mm per second.
While extendingtowards theload, thecylinder plungertravels at 20 mmper second.
Cylinder Speed
This chart will help youcalculate the time required foran Enerpac cylinder to lift aload when powered by a 700bar Enerpac hydraulic pump.The Cylinder Speed Chart canalso be used to determine thepump type and model bestsuited for an application whenyou know the plunger speedrequired.
To determine:
Best matching pump
Your 30 ton cylinder needs to move a load at aspeed of 2,2 mm per second. Simply go down fromthe top of the chart, to the value of 2,2 mm per
second. Followthe chart to theright to find thatthe 2000W SerieHushh pump ismost suitable foryour application.
30 ton 50 ton 75 ton 100 ton
NoLoad
NoLoad
NoLoad
NoLoad
LoadLoad
LoadLoad
41
,4
2,8
2,8
4 1
11
35
8,1
2,2
20
3 3
1,1
3,2
1,1
2,2
2,2
3,3
6,3
20
4,8
1,3
12
1,9
0,6
1,9
0,6
1,3
1,3
1,9
1 9
4,4
14
3,3
0,9
8,3
1,3
14
0,4
1,3
0,4
0,9
0,9
1,3
1,3
3,4
11
2,6
0,7
6,4
1,0
11
1 9
0,3
1,0
0,3
0,7
0,7
1,0
1,0
1,9
WalkPac™
Economy
Titan
Submerged
2000WS Serie
2000W Serie
3000WS Serie
3000W Serie
5000WS Ser
Pump Type
Not recommended
30 ton 50 ton 75 ton 100 ton
NoLoad
NoLoad
NoLoad
NoLoad
LoadLoad
LoadLoad
41
,4
2,8
2,8
4 1
11
35
8,1
2,2
20
3 3
1,1
3,2
1,1
2,2
2,2
3,3
6,3
20
4,8
1,3
12
1,9
0,6
1,9
0,6
1,3
1,3
1,9
1 9
4,4
14
3,3
0,9
8,3
1,3
14
0,4
1,3
0,4
0,9
0,9
1,3
1,3
3,4
11
2,6
0,7
6,4
1,0
11
1 9
0,3
1,0
0,3
0,7
0,7
1,0
1,0
1,9
WalkPac™
Economy
Titan
Submerged
2000WS Serie
2000W Serie
3000WS Serie
3000W Serie
5000WS Ser
Pump Type
Not recommended
Not recommended
Use the formula below to calculate cylinder plunger speed
Cylinder Plunger Speed =
(mm/sec)
Retract
The oil flowsfrom thepump andcylinder port A
to the tank T: the cylinderplunger will retract.
Hold
The oil flowsfrom the pumppressure portP to the tank
T. The cylinder port A isclosed: the cylinder plungerwill maintain its position.
Advance
The oil flowsfrom the pumppressure portP to the
cylinder port A: the cylinderplunger will extend.
Retract
The oil flowsfrom the pumppressure portP to cylinder
port B and from cylinder portA to tank T: the cylinderplunger will retract.
Hold
The oil flowsfrom the pumppressure port Pto the tank T.
The cylinder ports A and B areclosed: the cylinder plungerwill maintain position.
®
Hydraulic Technology Worldwide
104 © Enerpac 1997
Valve Information
Directional Control Valves
AdvanceHoldRetract
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢ �@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
3-Way Valves
are used with single-actingcylinders
Valves may be eitherpump mounted orremote mounted.
Pump Mounted
Valves may be eithermanually orsolenoid operated.
Manually Operated Solenoid Operated
Remote Mounted
4-Way Valves
are used with double-actingcylinders
Ways
The (oil) ports on a valve.A 3-way valve has 3 ports: pressure (P), tank (T), and cylinder (A).A 4-way valve has 4 ports:pressure (P), tank (T), advance (A) andretract (B).
Single-Acting cylinders require at least a 3-way valve, and can, under certain instances, be operated with a 4-way valve.
Double-Acting cylinders require a 4-wayvalve, providing control of the flow to eachcylinder port.
Positions
The number of control points a valve canprovide. A 2-position valve has the ability tocontrol only the advance or retraction of thecylinder. To be able to control the cylinderwith a hold position, the valve requires a3rd position.
Centre ConfigurationThe centre position of a valve is the positionat which there is no movement required ofthe hydraulic component, whether a tool orcylinder.
The most common is theTandem Centre. Thisconfiguration provides for
little to no movement of the cylinder and theunloading of the pump. This provides forminimum heat build-up.
The next most common is the Closed Centreconfiguration, which is used
mostly for independent control of multi-cylinder applications. This configurationagain provides for little to no movement ofthe cylinder, but also dead-heads thepump, isolating it from the circuit.Use of this type of valve may require somemeans of unloading the pump to preventheat build-up.
There are many more type of valves, suchas Open Centre and Float Centre. These valves are used mostly in complexhydraulic circuits and require other specialconsiderations.
P T
A B
A
P T
P
A
P T
A
P T
A
Single-acting cylinder
Controlled by a 3-way, 3-position valve.
P T
A
B
P T
A
B
Double-acting cylinder
Controlled by a 4-way, 3-position valve.
Advance
The oil flowsfrom the pumppressure portP to the
cylinder port A and fromcylinder port B to tank T.
P T
A
B
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�@�À�Q¢
P T
A B
OpenCentre
A B
P T
FloatCentre
105®
A D
C B
E
E
AB
BB
3/8"-1
8NPT (7
x)
J
F
C
H
L
H
B
E
F
D
C
3/8"-1
8NPT (6
x)
AC
DB
A D
CB
ENERPAC System Components:
All the additional elements you need to
complete your high pressure hydraulic
system and get started.
Engineered to work with your Enerpac
cylinders, pumps and tools, all Enerpac
components are designed to the most
exacting standards.
With this complete line of hydraulic
hoses, couplers, fittings, manifolds, oil
and gauges, Enerpac has the accessories
to complement your system and ensure
the efficient operation, long life and
safety of your hydraulic equipment.
System Components Section Overview
G, HSGG
T
GFGP
C, FA
HFA
BFZFZ
700
BDDG
GA, VNV, FM
Hoses
Couplers
Hydraulic OilManifolds
Fittings
Hydraulic Force & Pressure Gauges
Hydraulic Pressure Gauges
Test System Gauges
Digital gauges
Gauge Accessories
106 E
108 E
110 E
111 E
112 E
114 E
116 E
117 E
118 E
Component Type Series Page
106
®
Hydraulic Technology Worldwide700-Series, High Pressure HosesH Shown from top to bottom: HA-7206, HC-7206, H-7206
Thermo-Plastic Safety Hoses (700-Series)• For demanding applications, featuring a 4:1 design factor• Maximum working pressure of 700 bar• Four layer design, including two high strength steel wire
braids• Outside jacket is polyurethane, to provide maximum
abrasion resistance• Exhibits low volumetric expansion under pressure to
enhance overall system efficiency• Crimped-on rubber strain relief for improved life and
durability on all models
Safety and Quality
WARNING !
• Do not exceed 700 barmaximum pressure.
• Do not handle hoseswhich are under pressure.
More safety instructions in our ‘Yellow pages’.
Page: 94
1/4" NPT
3/8" NPT
A-604
A-630
AH-604
AH-630
C-604
CH-604
H Hose End Couplings
H To prevent back pressure and to increase cylinder retraction speed, when using longhoses with single-acting cylinders, the Enerpac HC-7300 range of hoses with increasedinternal diameter is the best choice.
107®
High Pressure Hydraulic Hoses
Hose End Assemblies and Couplers*
InternalDiameter
(mm)Model Number
HoseLength
(m)
700-SeriesThermo-Plastic
Weight(kg)
End one End two
1/4" NPT
3/8" NPT
CH-604
3/8" NPT
1/4" NPT
3/8" NPT
A-630 AH-630 CH-604
3/8" NPT
A-604
AH-604
AH-630
C-604
CH-604
CH-604
3/8" NPT
CH-604
1,81,81,81,81,80,60,91,83,06,19,1150,91,83,00,60,91,83,01,80,91,83,00,91,83,06,11,8151,88,03,06,19,1151,83,06,1
1,1
1,00,50,70,91,42,84,57,0
1,1
1,01,5
1,01,31,80,81,01,52,91,17,01,61,62,44,57,3
11,50,42,55,1
6,4
9,7
––HB-7206QB–HC-7206QH-7202H-7203H-7206H-7210H-7220H-7230H-7250–HA-7206B–––HA-7206HA-7210HB-7206HC-7203BHC-7206BHC-7210BHC-7203HC-7206HC-7210HC-7220HC-7206CHC-7250CH-7306H-7308H-7310H-7320H-7330H-7350HC-7306HC-7310HC-7320
Hose Oil Capacity
When using greater hose lengths, it is sometimes necessary to fill thepump reservoir after filling the hoses.To determine the hose oil capacity, usethe following:
For 6,4 mm inside diameter hoses:Capacity (cm3) = 32,1699 x Length (m)
For 9,7 mm inside diameter hoses:Capacity (cm3) = 73,8981 x Length (m)
700Series
Inside Diameter:
6,4 and 9,7 mmLength:
0,6 -15 mMaximum Operating Pressure:
700 bar
* For technical information on couplers see next page.
108
®
Hydraulic Technology Worldwide
3/8" High Flow Couplers• Standard equipment on most Enerpac cylinders• Recommended for use on all Enerpac pumps and cylinders
where space and porting permits• Includes “2-in-1” dust cap for use on male and female
coupler halves
3/8" High Pressure ‘Flush-face’ Couplers• Featuring “Push-to-connect” operation, to guarantee good
connection every time• Flush-face, zero-leak operation for minimal spillage• HTMA* recognized for safety and performance• Will not interchange with low pressure couplers
3/8" Regular Spee-D-Coupler®
• For medium duty applications with hand pumps as an example
• Includes female aluminium dust cap
1/4" Regular Coupler• For use with small cylinders and hand pumps• Includes female aluminium dust cap
* Hydraulic Tool Manufacturers Association
Hydraulic Couplers
Facilitating Quick Connection ofHydraulic Lines
H Shown: CR-400, FR-400, FH-604, AR-400, AH-604, A-630
Thread sealer
To seal NPT threads use oneof the new anaerobic threadsealers or Teflon paste. When using Teflon Tape,
apply the tape one thread from the endof a fitting to prevent it from winding upin the hydraulic system.
WARNING!Couplers should bepressurized only whencompletely connected and
should not be coupled or uncoupledwhen pressurized.
More safety instructions in our ‘Yellow Pages’.
Page: 94
109®
CR-400
FR-400
AR-400
AR-630
Hydraulic Couplers
CompleteSet
MaximumFlow
Capacity(l/min)
Female Half
Male Half
DustCap(s)
A* B C D E F G
CH-604
FH-604
AH-604
AH-630
69
110
77
66
54
72
42
35
3/8"
NPT
3/8"
NPT
3/8"
NPT
1/4"
NPT
35
31
28
22
27
31
26
20
23
26
23
19
22
28
19
15
40
40
7,6
7,6
(2x)CD-411
–
Z-410femaleonly
Z-640femaleonly
BA
CDCE
F G
C-604
BA
CD
G
CE
F
F-604
BA
CDCE
F
A-604 and A-630
Coupler Type
High-Flow Coupler
Metal Dust Caps
Aluminium dust caps areavailable for the C-604 seriescouplers. Order model number: CD-411M for female halfCD-415M for male half
ACFSeries
Maximum Flow Capacity:
40 l/minThread:
1/4" and 3/8" NPTMaximum Operating Pressure:
700 bar
Flush-Face coupler
Regular Spee-D-Coupler©
Regular Coupler
C-604
F-604
A-604
A-630
Model Numbers Dimensions (mm)
* Value A is total length when male and female half are connected.
110
®
Hydraulic Technology Worldwide
Use only genuineEnerpac Hydraulic Oil.The use of any otherfluid will render yourEnerpac warranty nulland void.
Hydraulic Oil, Manifolds and Fittings
178 mm Long Manifold with 7 female ports
369 mm Long Manifold thatallows direct mounting ofcontrol valves to the manifold.Plugs .38 NPTF.
6-Port Hexagon Manifold.Plugs furnished for all ports3/8"-18 NPTF.
Premounted Manifold
Functions as split-flow valveto control two single-actingcylinders simultaneously.
A-64
A-65
A-66
AM-2
32
32 38 3838 32
3/8"-18NPT (7x) 5076
6,3 89
178
32
32 102102102 32
3/8"-18NPT (7x) 83203
6,3 184
369
3/8"-18NPT (6x)
41
1/4"-20UNC
58
50
38
6
21
20
45
ø40
3045
93
110
70
Description Dimensions (mm)ModelNumber
• Maximum pumpvolumetric efficiency
• Maximum internal heattransfer
• Prevents pump cavitation
• Additives prevent rust,oxidation and sludge
• High viscosity index• Maximum film protective
lubricity
1 litre5 litres60 litres
HF-95XHF-95YHF-95Z
Model Number
Contents
H Shown : A-65, FZ-1625, HF-95Y, FZ-1634, FZ-1607, A-64, AM-2
The Genuine Range
Hydraulic Oil
Manifolds
A-64 A-65
111®
Hydraulic Oil, Manifolds and Fittings
B
AD
C
A
DC
B
A
DC
B
A
DC
B
A
C
CB
A
C
CB
A
BC
C
A
DC
B
A
C D
B
Model Number Dimensions (mm)
Recommended Tubing
Enerpac does not supply high-pressure pipe or tubing, but recommends the useof cold drawn steel tubing instead of regular pipe in the following dimensions:In place of .25" pipe, use 13 mm O.D. x 11 ga. (3 mm) wall.In place of .38" pipe, use 9 mm Schedule 80 seamless pipe.In place of .50" pipe, use 21 mm O.D. x .4 mm wall.This tubing can be threaded with standard pipe threading dies.
ABFZFZHFSeries
AdaptorFrom:
M14 x 1,51/4”-NPT1/4”-NPT1/2”-NPT
To:3/8”-NPT3/8”-NPT1/8”-NPT3/8”-NPT
47
44
30
42
24
23
19
28
3/8”-18 NPTF1/4”-18 NPTF1/8”-27 NPTF3/8”-18 NPTF
M14 x 1,53/8”-18 NPTF1/4”-18 NPTF1/2”-14 NPTF
BFZ-16322FZ-1055FZ-1642FZ-1634
A
C D
B
AdaptorFrom:
G 1/4”
G 1/4”
G 3/8”
G 3/8”
To:1/4”-NPT1/8”-NPT1/4”-NPT3/8”-NPT
35
31
43
43
19
19
24
24
1/4”-18 NPTF1/8”-27 NPTF1/4”-18 NPTF3/8”-18 NPTF
G 1/4”
G 1/4”
G 3/8”
G 3/8”
BFZ-16411BFZ-16421BFZ-16323BFZ-16324
ReducerFrom:3/8”-NPT1/4”-NPT3/8”-NPT
To:1/4”-NPT1/2”-NPT
G3/8”
Elbow
Tee
19
28
19
19
22
19
1/4”-18 NPTF1/4”-18 NPTF
G 1/4”
3/8”-18 NPTF1/2”-14 NPTF3/8”-18 NPTF
FZ-1630BFZ-1630BFZ-16301
CrossFrom: 3/8”-NPT Female
To: 3/8”-NPT Female
45 25 3/8”-18NPTF –FZ-1613
Coupling
Street ElbowFrom: 3/8”-NPT Male
To: 3/8”-NPT Female
23 33 3/8”-18 NPTF 3/8”-18 NPTFFZ-1616
Hexagon Nipple
Reducing ConnectorFrom: 3/8”-NPT Female
To: 1/4”-NPT Female
From: 1/2”-NPT Female
To: 3/8”-NPT Female
28
47
25
29
3/8”-18 NPTF
1/2”-14 NPTF
1/4”-18 NPTF
3/8”-18 NPTF
FZ-1615
FZ-1625
A B C D
Fittings 700 bar
From:1/4”-NPT3/8”-NPT3/8”-NPT
To:1/4”-NPT3/8”-NPT3/8”-NPT
38
51
37
16
19
19
1/4”-18 NPTF3/8”-18 NPTF3/8”-18 NPTF
1/4”-18 NPTF3/8”-18 NPTF3/8”-18 NPTF
FZ-1607FZ-1619FZ-1617
From:3/8”-NPT1/4”-NPT
To:3/8”-NPT1/4”-NPT
36
29
23
19
3/8”-18 NPTF1/4”-18 NPTF
3/8”-18 NPTF1/4”-18 NPTF
FZ-1614FZ-1605
From:3/8”-NPT1/4”-NPT3/8”-NPT
To:3/8”-NPT1/4”-NPT3/8”-NPT
45
45
57
25
243/8”-18NPTF
3/8”-18 NPTF1/4”-18 NPTF3/8”-18 NPTF
–
–
–
FZ-1612FZ-1637FZ-16312
From:3/8”-NPT1/4”-NPT
To:3/8”-NPT1/4”-NPT
33
36
20
24
3/8”-18 NPTF1/4”-18 NPTF
–
–
FZ-1610FZ-1638
112
®
Hydraulic Technology Worldwide
All CylindersAll CylindersAll CylindersAll 5 ton CylindersAll 10 ton CylindersAll 25 ton CylindersAll 50 ton Cylinders 13 ton RCH-SeriesRCH-202, 302, 603RCS-201, 302 RCS-502, 1002 10 ton Press25 ton Press50 ton Press25-50 ton H-Frame 100 ton H-Frame200 ton H-Frame
Hydraulic Force & Pressure Gauges
Auto-Damper Valve
For automatic control ofgauge fluctuations, the V-10Auto-Damper Valve controlsthe movement of the gauge
needle by restricting oil flow in and outof the gauge. No adjustments needed.
Page: 125
Used With
• Calibrated to read in bar, kN or ton• Excellent readability:
gauge face dimensions 100 mm• Fast, easy installation
Visual Reference ofSystem Pressure
H Multiple pressure gauges are used to monitor system performance,maintaining process accuracy.
H Shown from left to right: GF-20S, GF-813S, GP-10S
113®
GP-10SGP-15SGP-10L*GF-5SGF-10SGF-20SGF-50SGF-120GF-813SGF-230GF-510GF-10SGF-20SGF-50SGF-835GF-871GF-200S
GP-10SGP-15SGP-10L*GF-5SGF-10SGF-20SGF-50SGF-120GF-813SGF-230GF-510GF-835GF-871GF-200S
5066505050505057385757505050
Hydraulic Force & Pressure Gauges
Gauge AdaptorThreadUnits per Division ModelNumber
Model Number
DepthA
(mm)
bar kN ton GA-1 GA-2 GA-3
Accuracy, % of full scale:
± 2%
Face Diameter:
100 mm
Pressure Range:
0-1000 bar
0 - 7000 - 10000 - 700
––––––––––––––
–––
0 - 450 - 90
0 - 2250 - 4500 - 105
–0 - 175 / 2750 - 450 / 900
0 - 900 - 2250 - 450
–0 - 675 / 900
0 - 1350 / 1800
––––––––
0 - 20/30/600 - 20/300 - 50/100
–––
0 - 25/30/500 - 75/1000 - 150/200
10 bar10 bar10 bar0,5 kN1 kN2 kN5 kN1 kN1 ton
1 ton + 2 kN1 ton + 5 + 10 kN
1 kN2 kN5 kN
5 + 10 ton2 ton + 10 kN
5 + 4 ton + 10 kN
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/4" NPT
1/4" NPT
1/4" NPT
* GP-10L is a L-Fitting type, including a V-10 Auto Damper Valve.
GFGPSeries
Gauge Type and Calibration
Required
••••••••
•••••
••••••••
•••••
•
•••
A100
Pressure Gauges
To measure the input pressureinto cylinders or high pressuresystems. Also for all testingapplications.
Load Gauges
To measure external load supported by a cylinder or jack in ton or kN. For pressing parts together under pre-determined loads, weighing, testing, etc.
Maximum IndicatorPointer
Indicator retains peakreadings of pressure or forcegenerated by the system.
Order model number: H-4000M.
Note: for 100 mm gauges only.
118
114
®
Hydraulic Technology WorldwideHydraulic Pressure Gauges
H Lifting the recommended way with shut-offvalve and pressure gauge.
H Gauges shown: 4048L, 2011R, 2501L, SSG-2512L, SSG-2518L, H-4048L, H-4070L
Maximum IndicatingPointer
Indicator retains peakreadings of pressure or forcegenerated by the system.
Order model number: H-4000M.
Note: For use on H-Series of gauges only.
Glycerine Filled (G-Series)• All pressure sensing parts sealed and dampened by
glycerine for long life• Includes safety blow-out disk and pressure equalling
membrane• Gauge snubbers or needle valves recommended for high
cycle applications
Standard Dry (2500 and 4000-Series)• These economical gauges are the best selection for
general purpose applications• Gauge snubbers or needle valves recommended for high
cycle applications
Stainless Steel (SSG-Series)• Features solid front and safety blow-out in rear• Corrosion resistant stainless steel construction• Glycerine filled for dampening hydraulic pulsation and
equipment vibration
High Cycle (H-Series)• Ideal for use in many applications, specifically for high-
cycle and harsh environments• Gauge snubbers or needle valves recommended to shut
off gauge when not in use
Visual Reference ofSystem Pressure
Gauge adaptor
For easy gauge installationinto almost any system,Enerpac offers a completeline of gauge adaptors.
Page: 118
115®
Size
Dimensions (mm)
Connection A B C D E
Model Number
Hydraulic Pressure Gauges
A
D
B
C
BC
E
Accuracy, % of full scale:
±1% to 3%
Face Diameter:
63-100 mm
Pressure Range:
0-1000 bar
GHSSGSeries
0-20-40-7
0-110-130-200-400-70
0-1400-2000-4000-700
0-10000-10-40-7
0-110-140-20
0-1400-2000-3500-70
0-2000-3500-7000-4000-700
0-1000
G2507LG2508LG2509LG2510LG2511LG2512LG2513LG2514LG2515LG2516LG2517LG2535LG2536L2507L2509L2510L2511L2512L2513L2516L2517L2518L
SSG2514LSSG2516LSSG2518LSSG2519L
–––
–G2525RG2526RG2527R
–G2529RG2530RG2531RG2532RG2533RG2534RG2537RG2538R
––––––––––––––––
––––––––––––––––
2529R2530R
–––––––––––
G4007LG4008LG4009LG4010LG4011LG4012LG4013LG4014LG4015LG4016LG4017LG4088LG4089L
–––
4011L–––––––––
H4048LH4049LH4050L
–––––––––
G4037LG4038LG4039LG4040L
–––––––––––––
H4070LH4071LH4072L
0,511115
10101050
1001001000,111115
105050105050
100–––
0,20,511225
10202050
100100
–––1–––––––––
50100100
0,050,10,10,20,20,51125
1010200,20,10,10,20,20,5255155
10–––
0,020,050,10,10,20,20,51225
1010–––––––––––––5
1010
G-Series
Standard Dry Series
SSG-Series
H-Series
1/4 NPTF
Lower Mount
PressureRange
(bar)
Gauge Series
1/4 NPTF
Center Rear
Face1/4 NPTF
Bottom Rear
1/4 NPTF
Lower Mount
1/2 NPTF
Lower Mount
Major Graduation Minor Graduation
636363
100100
Lower MountCenter RearBottom RearLower MountLower Mount
636363100100
3737272949
84––
121136
–63–––
1/4" NPTF
1/4" NPTF
1/4" NPTF
1/4" NPTF
1/2" NPTF
Note: dimensions for reference only.
H SELECTION CHART
Size 63 mm Size 100 mm ø63 mm
(bar) (bar) (bar) (bar)
ø100 mm ø63 mm ø100 mm
116
®
Hydraulic Technology WorldwideTest System Gauges
TSeries
Accuracy, % of full scale:
±1%
Face Diameter:
152 mm
Pressure Range:
0 - 3500 bar
• ±1% full scale accuracy on all models• All gauges have spring-loaded backs with rubber blow-out
plugs to protect case assembly in case of over-pressurization
• 2800 and 3500 bar models include flange mounting• 1/2" NPTF versions are made of high strength alloy steel• 0,25" cone models are made of 316 stainless steel, with
403 stainless steel on 2800 and 3500 bar models
PressureRange
(bar)
Alloy Steel
1/2" NPT
StainlessSteel
.25" Cone
NumberIntervals
Gradu-ationInter-vals
0 - 700 - 3500 - 700
0 - 14000 - 21000 - 28000 - 3500
T-6001LT-6002LT-6003L
––––
T-6005LT-6006LT-6007LT-6008LT-6009LT-6010LT-6011L
1050
100200200500500
15
1020202050
Model Number
Cone Mount GaugeAdaptor
Contains fittings to connect0,25" cone fitting gauge to 0,38" cone system.
Kit includes 43-301 tee and 43-704gauge adaptor. Order model number: 83-011.
Cone Mount GaugeConnector
For connecting gauges with0,25" cone fitting directly tomodel number 11-100 or
11-400 pump (page 60). May be usedwith other 0,25" cone systemsOrder model number: 43-704
Lens and Needle Kit
Replacement lens and dragpointer for Test Systemgauges.
Order model number: T-6000M
H An Enerpac P-2282 hand pump equipped with aT-6011L test system gauge is used for proofpressure testing of hydraulic valves.
Page: 61
H Gauge shown: T-6011L
117®
Digital, Hydraulic Pressure Gauges
• Each gauge includes: pressure transducer, power transformer, UL/CSA approved line interconnect cordand screwdriver
• 10 psi/1 bar increments in large, easy-to-read digits• Angle bracket in BDGB-1, PDGB-1, BDGL-1 and BDGP-1
and DIN case allows easy mounting• Zero set screw easily adjusts to zero gauge as needed• Solid state design; no moving parts• -1°C up to 54°C operating temperature
Battery Operation
Model BDGB-1 and BDGP-1may be operated by an 8 to18 VDC battery power supplywhen used in remote
applications. The 1,8 m power cord isstandard included, but is also separatelyavailable under model number DGC-1.
Gauge adaptor
For easy gauge installationinto almost any system,Enerpac offers a completeline of gauge adaptors.
47
95 139
PDGB-1PDGP-1PDGL-1BDGB-1BDGP-1BDGL-1
ReadsHydraulicPressure
up to 700 bar
ModelNumber
Retains Peak Value
AdjustableHydraulicPressure
Limit
•
•
•
•
•••
H Shown from left to right: BDGL-1, BDGP-1, BDGB-1 BDG/PDGSeries
Accuracy, % of full scale:
± 0,5%
Voltage:
230 Volt
Pressure Range:
0 -10.000 psi/700 bar
H An Enerpac digital gauge is used on a bench press to provideprecise, easy to read pressure readings for testing.
Page: 118
ReadsHydraulicPressure
up to 10.000 psi
•••
118
®
Hydraulic Technology Worldwide
Needle Valves (V- and NV-Series)• Both NV-25 and V-9 provide positive shut-off• 303 stainless steel stem, 16 threads/in (NV-25)
Swivel Adaptor (GA-918)• Simplifies gauge installation and reading
GA/NV/V/FMSeriesOperating Pressure:
700 bar
C F
E
F
B
A
D
120˚
A
B
C
D E
F
A
F
EB
C
63 mm Standard Dry63 mm Glycerine100 mm Standard Dry100 mm Glycerine
FM-25FM-25GFM-40FM-40G
21242147
19211921
6363
100100
8585
132132
GaugeType
ModelNumber
Model Number
Orifice(mm)
ThreadSize A B C E F
ModelNumber
GaugePort(NPTF)
Male End(NPTF)
Female End(NPTF)
Dimensions (mm)
Dimensions (mm)
Dimensions (mm)
A B C D E F
Dimensions (mm)
CBA
117 43 1/2" NPT 28,5 1/2" NPT 28 38
D E S S1
ModelNumber A B C D E
NV-25V-9
GA-1GA-2GA-3GA-4
GA-918
1/2"1/2"1/4"1/2"
3/8"3/8"3/8"1/4"
71139133111
31352535
32323532
1/2" NPT
1/2" NPT
1/4" NPT
1/2" NPT
3/8" NPT
3/8" NPT
3/8" NPT
1/4" NPT
3/8" NPT
3/8" NPT
3/8" NPT
3/8" NPT
57
8892
2631
5463
6363
2225
1/4" NPTF
1/2" NPTF
3 Ø on 74 Ø B.C.
4 Ø on 116 Ø B.C.
Front Flange Mountings (FM-Series)• For panel mounting of “G” Series and ‘Standard Dry’ Series of gauges• 63 mm and 100 mm may require drilling of gauge cases for installation
Gauge Adaptors (GA-Series)• For easy mounting of a pressure gauge onto your system• Male end screws into pump or cylinder port, female end accepts hose or
coupler, 3rd port is for gauge connection• GA-918 provides for swivel connection
Gauge Accessories
3/8"
GA-2, GA-3, GA-4
GA-1
A
S
E BCD
S1 S
F
E
F
CB
A
D
H Shown: GA-1, GA-2, GA-3, GA-918, NV-25, V-9, FM-25
119®
Valves Section Overview
L
Q
K
NJ
P
E
HM
R
DC
B
A
3/8"-1
8NPT
1.53
7.62 max.
3.12
ø1.503/8"-18NPT (3x)
4.53
ENERPAC hydraulic valves are
available in a wide variety of models
and configurations and are rated for a
700 bar operating pressure. Available
for pump mounted operations or
remote mounting and manual or
solenoid actuation, making your
application requirements easy to solve.
Whether you require directional
control, flow control, or pressure
control, there is an Enerpac valve to
match your application exactly.
V
BV, V
BV, V
3-Way DirectionalControl Valves
4-Way DirectionalControl Valves
Pressure and FlowControl Valves
120 E
122 E
124 E
Valve Type Series Page
120
®
Hydraulic Technology Worldwide3-Way Directional Control Valves
ValveLocation
PumpMounted
RemoteMounted
ValveOperation
ValveType
2-position
3-position,Closed Center
RemoteMounted
3-position,Closed Center,
Locking
RemoteMounted
3-position,Tandem Center
PumpMounted
3-position,Tandem Center
H Shown from left to right: BVS-3, VM-2, VM-3, VM-3L, VC-3, VC-3L
PumpMounted
RemoteMounted
3-position,Tandem Center
3-position,Tandem Center
PumpMounted
3-pos., TandemCenter, Locking
RemoteMounted
3-pos., TandemCenter, Locking
• 3-way, 3-position valves provide advance/hold/retractoperation for use with single-acting cylinders
• Manual or solenoid operation• Remote or pump mounting on most Enerpac pumps• Return line kit VRL-10 included with remote valves• Available ‘locking’ option on VC and VM Series valves for
load-holding applications• Standard ‘locking’ feature on BV Series valves
Push-Button ControlStation
Solenoid valves are suppliedwith 2,4 meter power cordand push-button control
station IC-300 with 3 m control cord.
H A typical multi-cylinder control set-up using V, VC and VM Series Valves.
For Reliable Controlof Single-ActingCylinders
Manual
Manual
Manual
Solenoid24 VAC
Solenoid24 VAC
Manual
Manual
Manual
Manual
121®
3-Way Directional Control Valves
BV VSeries
Flow Capacity:
17 l/minMaximum Operating Pressure:
700 bar
36 47
130
138
28
1279146
ø8 (6x)
2820
15
6382
3/8"-18NPT
2,2
2,1
2,9
3,9
4,7
2,9
4,7
10,3
9,4
ModelNumber
Schematic Flowpath
Advance Hold Retract
HydraulicSymbol
Weight
(kg)
VM-2
VC-15
VC-15L
BVR-3
BVS-3
VM-2
BVR-3, BVS-3 1) BVR-3 onlyVC-3, VC-3L, VC-15, VC-15L
1) VC-3L and VC-15L only
VM-3, VM-3L 1) VM-3L only
P
A
P
A
P
A
P T
A
P T
A
A
P
A
T P
A
T P
A
P T
A
P T
VM-3
VC-3P
A
P T
A
P T
AA
P T
VM-3L
VC-3LP
A
P T
A
P T
A
A
P T
A
P T
A
P T
Valving Help
See Basic System Set-Up andValve Information in our‘Yellow Pages’
Page: 98
Additional Fittings
For additional fittings seeour ‘System ComponentsSection’.
Page: 111
Locking Valves
For applications that requirepositive load holding, mostVC and VM Series valves areavailable with a pilot-
operated check valve. This optionprovides hydraulic locking of the loaduntil the valve is shifted into the retractposition.To order this feature, place an “L” at theend of the model number.
Valve dimension in mm
122
®
Hydraulic Technology Worldwide4-Way Directional Control ValvesH Valves shown: VC-4L, VC-20, BVS-4, VM-4, BVR-4, VM-4L
ValveLocation
RemoteMounted
ValveOperation
Manual
ValveType
3-position,Closed Center
RemoteMounted
Manual 3-position,Closed Center,
Locking
RemoteMounted
Solenoid24 VAC
3-position,Tandem Center
PumpMounted
Solenoid24 VAC
3-position,Tandem Center
PumpMounted
RemoteMounted
Manual 3-position,Tandem Center
Manual 3-position,Tandem Center
PumpMounted
Manual 3-pos., TandemCenter, Locking
RemoteMounted
Manual 3-pos., TandemCenter, Locking
Push-Button ControlStation
Solenoid valves are suppliedwith 2,4 meter power cordand push-button control
station IC-400 with 3 m control cord.
• 4-way, 3-position valves provide advance/hold/retractoperation for use with double-acting or two single-actingcylinders
• Manual or solenoid operation• Remote or pump mounting on most Enerpac electric
pumps• Return line kit VRL-10 included with remote valves• Available ‘locking’ option on VC and VM Series valves for
load-holding applications• Standard ‘locking’ feature on BV Series valves
H A 4-Way directional control valve together with a pressure relief valveare used here to control a double-acting cylinder.
For Double-ActingCylinder Control
123®
4-Way Directional Control Valves
VSeries
Flow Capacity:
17 l/minMaximum Operating Pressure:
700 bar
2,1
2,9
3,9
4,7
2,9
4,7
12,0
11,1
ModelNumber
Schematic Flowpath
Advance Hold Retract
HydraulicSymbol
Weight
(kg)
VC-20
VC-20L
BVR-4
BVS-4
P T
A
B
P T
A
B
P T
A
B
T P
B
A
T P
B
A
T P
B
A
A
P T
B
VM-4
VC-4P T
A
B
P T
A
B
P T
A
B
P T
A
B
P T
A
B
P T
A
B
A
P T
B
VM-4L
VC-4L
P T
A B
P T
A B
A B
P T
BVR-4, BVS-4 1) BVR-4 onlyVC-4, VC-4L,VC-20, VC-20L
1) VC-4L andVC-20L only
VM-4, VM-4L 1) VM-4L only
Valving Help
See Basic System Set-Up andValve Information in our‘Yellow Pages’
Page: 98
Additional Fittings
For additional fittings seeour ‘System ComponentsSection’.
Page: 111
Locking Valves
For applications that requirepositive load holding, mostVC and VM Series valves areavailable with a pilot-
operated check valve. This optionprovides hydraulic locking of the loaduntil the valve is shifted into the retractposition.To order this feature, place an “L” at theend of the model number.
Valve dimension in millimetres.
124
®
Hydraulic Technology WorldwidePressure and Flow Control Valves
• All valves are rated for 700 bar operating pressure• All valves feature NPTF porting to insure against leakage at
rated pressure• All valves are painted, coated, or plated for corrosion
resistance
H Valves shown from left to right: V-66, V-9, V-152, V-17, V-42, V-161, V-10, V-82, V-66F
V-82 V-182 V-8F
V-10 V-17 V-42
V-9
V-66 V-66F V-152 V-161
Valve Dimensions in mm
Your HydraulicControl Solution
H The V-152 Pressure relief valve limitsthe pressure or force developed in thehydraulic system.
125®
Pressure and Flow Control Valves
VSeries
Maximum Operating Pressure:
700 bar
Needle ValveV-82V-182V-8F
Snubber ValveV-9
Auto Damper®
ValveV-10
Check ValveV-17
Pilot OperatedCheck ValveV-42
Manually OperatedCheck ValveV-66V-66F
Pressure Relief ValveV-152
Sequence ValveV-161
Hydraulic Symbol
V-82: To control cylinder speed. Can also be used as shut-off valvefor temporary load holding. 3/8" NPTF female ports.V-182: Same as V-82, but with
1/4" NPTF female ports. Also suitablefor gauge snubbing (also V-82).V-8F: Like V-82, but with very finemetering for precise flow control.Not recommended as shut-off valve.
V-9: Infinitely adjustable for meteringoil out of a gauge to preventsnapping of gauge pointer whenload or pressure is suddenlyreleased. Also suitable as shut-off
valve to protect the gauge duringhigh cycling applications. 1/2" NPTF
male and female threads for use withGA-1, GA-2 or GA-4 gaugeadaptors.
V-10: To be used when gaugepressure must be monitored duringhigh cycle applications. Creates aflow resistance when load isreleased suddenly.
No adjustments are necessary. 1/2" NPTF male and female threads foruse with GA-1, GA-2 or GA-4 gaugeadaptors.
V-17: Ruggedly built to resist shockand operate with low pressure drop.Closes smoothly without pounding. 3/8" NPTF female ports.
V-42: Can be mounted at thecylinder to hold the load in case ofsystem pressure loss. Normally usedwith double-acting cylinders wherepilot port receives pressure from a
Tee-fitting in the cylinder retract line.3/8" NPTF female ports.
V-66: Used for load holdingapplications with single and doubleacting cylinders. Valve is manuallyopened to allow oil to flow back totank when cylinder retracts.
V-66F: Similar to V-66, but with veryfine metering capability for preciseflow control.
V-152: Limits pressure developed by the pump in hydraulic circuit, thuslimiting the force imposed on othercomponents. Valve opens wheneverpreset pressure is reached.
To increase pressure setting, turnhandle clockwise. Includes:• 0,9 m return line hose kit, • ±3% repeatability, • 55-700 bar adjustment range.
V-161: To control oil flow to asecondary circuit. Flow is blockeduntil system pressure rises to the V-161 setting. When this pressurelevel is reached, the V-161 opens to
allow flow to the secondary circuit. Apressure differential is alwaysmaintained between the primary andsecondary circuit. Min. operating pressure: 140 bar.
Valve Type and Model Number Description
Valve Applications
To see these valvesused in typical hydrauliccircuits, please see our‘Yellow Pages’.
Page: 98
AP
Fittings
For additional fittingssee the fitting page ofthe System Componentssection.
Page: 111
G
A
®
Hydraulic Technology Worldwide
K
K
C
D
G
B
F
J
A
Enerpac Hydraulic Presses
These Press features increase productivity andbroaden the range of applications:
Standard on 50, 100and 200 ton H-Framepresses with double-acting cylinder, theexclusive “Hydrajust”bed positioning,allowing adjustment ofupper and lower bed.
On 50, 100 and 200ton presses the pumptable can be movedsideways allowingside-loading ofworkpieces.
Optional “V-blocks”for positioning ofcomplex parts, aredesigned with high-strength steel for longlife.
ENERPAC Hydraulic Presses are available in a
variety of capacities and sizes. The press frames
are welded for maximum strength and
durability. Strong frames and powerful high-
pressure hydraulics will provide years of
dependable service in many applications.
Enerpac Presses are available in Bench,
C-frame, Arbor, H-frame, Workshop and
Roll-frame models.
For safety reasons, all Enerpac presses with air
and electric-drive pumps can be supplied with
hand operated valves. This allows operation
only when the valve handle is hand-held in the
appropriate position. Once released, the valve
automatically returns to the centre (hold)
position.
126
J
F
B
D
CG
J
E
H
127®
U
V
Z
Y
380*
WT60
50
14015
0
Press Section Overview
B
SOP
SOP
BPR
A
A
TMLH
128 E
132 E
132 E
134 E
136 E
136 E
138 E
139 E
Capacity
ton(kN)
Press type and functions Serie Page
10-200(101-1995)
10-100(101-933)
10(101)
50-200(498-1995)
5-20(45-178)
10-30(101-295)
10-200(101-1995)
900-275.000 kg
Heavy Duty H-FramePresses
Workshop Presses
Bench Presses
Roll Frame Presses
C-Clamp Presses
Arbor Presses
Press Accessories andSpeed Chart
Tension MeterLoad Cells
In order to fully complywith CE regulations, some presses must beequipped with specific
safety components, such as springcentered valves, two-hand controldevices or others.
Available in capacities from10 to 200 ton, each Enerpacpress consists of three basichigh quality components: apress frame, a power sourceand a cylinder.
Welded FrameAll presses feature a weldedsteel frame for optimumstrength. The larger modelsinclude features likeworkpiece side-loading andhydraulic height adjustmentof upper and lower bed.
Power SourceDepending on the productionrequirements, Enerpacpresses can be powered bymanual, air-hydraulic andelectric-drive power sources.
CylinderDepending on the applicationdouble-acting cylinders offerincreased efficiency. Checkout the Selection Charts forthe press best suited for yourneeds.
GaugeAll H-frame and Workshoppresses (except SOP-106models) feature an easy tomonitor pressure/force gaugefor increased safety.
128
®
Hydraulic Technology WorldwideB-Series, H-Frame Presses
• Quality welded H-frame for maximum strength andstability
• Manual, air or electric driven power sources• Available with single or double-acting cylinder• Side movement of cylinder (on 10 and 25 ton)• Unique “Hydrajust” bed positioning device on 50, 100 and
200 ton presses equipped with double-acting cylinders
H Press shown: BEP-5273
Great PossibilitiesGreat Performance
V-Blocks
These V-Blocks aredesigned for easy fixturingof round stock and othernon-uniform materials.
Featuring precise fit into the pressbolster.
Page: 138
“Hydrajust”Bed Positioning
Allows vertical adjustment ofupper and lower bed ondouble-acting 50, 100 and200 ton presses.
The “Hydrajust” bedpositioning is not designed
to withstand full cylinder capacity, onlyto be used for bed adjustment.
Page: 138
Swivel Pump Table
All H-Frame presses featurea pump table which can beswivelled to clear the rightside of the press, allowing
side-loading of work-pieces.
Page: 138
F An Enerpac H-framepress makes quick workof removing the shaftfrom this assembly.
129®
Heavy-Duty H-Frame Presses
BSeries
Capacity:
10-200 tonMaximum Daylight x Width:
1339 x 1220 mmMaximum Operating Pressure:
700 bar
* {…} = advance speed in mm per handpump stroke.
** See next pages for specific model numbers.
For increased safety,gauge included
All press models include agauge and gauge adaptor,matching the press capacity.
Page: 112
Best matching powersource
Depending the productionrequirements of your press,a wide range of power
sources are available to best match your application.
Page: 52
Man. Man.Elec. Air Elec.
{7,8}{11,2}12,0
123,0123,0{11,8}{37,9}53,053,02,8
26,026,0
{1,7}{1,7}1,51,71,7
{0,7}{1,4}0,70,72,82,82,8
Stroke(mm)
Speed(mm/sec)*
Power Source** Press ModelNumber
Maximum Bed
Daylight
(mm)
BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176
510510510510510510510510510510510510
102510251025102510251025102510251025102510251025
Maximum Bed
Width
(mm)
10(101)
25(232)
PressCapacity
ton(kN)
•
•
••••
••
••
•••
••
155257155257254159260260260260260159
RapidAdvance
Pressing
= Single-Acting
Type Valve
Cylinder**
••••••••••••
H QUICK SELECTION CHARTFor more technical information see next page.
{2,3}{17,7}25,012,012,020,0{8,8}13,06,4
11,011,011,5
{0,3}{0,7}0,31,31,31,9
{0,3}0,20,71,01,01,3
••
BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253
800800800800800800
100010001000100010001220
133513351335133513351335114511451145114511451339
50(498)
100(933)
200 (1995)
••••••••••
•••
••••
••
•
•
•
159159333333333333168168168333333333
•••••
••••
•
••
= Double-acting
••••
•••
•
•
130
®
Hydraulic Technology WorldwideB-Series, H-Frame Presses
130
A B C E F G J L
Press Model Number
BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253
10(101)
25(232)
50(498)
100(933)
200 (1995)
PressCapacity
ton(kN)
H-Frame Press Dimensions (mm)
P-392P-80PAT-1102NPAM-1021PAM-1041P-80P-462PAM-1021PAM-1041PEM-2305WSPEM-2405WPEM-2205WP-80P-462PAM-1041PEM-2505WPEM-2420WPER-3420WP-464PAM-1041PEM-2408WPEM-3420WPER-3420WPER-3420W
Pump Model Number
RC-106RC-1010RC-106RC-1010RR-1010RC-256RC-2510RC-2510RD-2510RC-2510RD-2510RC-256RC-506RC-506RR-5013RR-5013RR-5013RR-5013RR-1006RR-1006RR-1006RR-10013RR-10013RR-20013
8
8
8
8
26
8
8
8
8
26
24
8
8
8
26
26
26
26
26
26
26
26
26
26
54
56
84
87
87
56
56
87
87
74
74
74
56
56
87
74
74
74
56
87
74
74
74
74
F For full features see previous page.
Page:Page:
CylinderModel Number
260260260260260260260260260260260260312312312312312312432432432432432553
140140140140140140140140140140140140252252252252252252332332332332332233
––––––––––––
292292292292292292392392392392392333
510510510510510510510510510510510510800800800800800800
100010001000100010001220
630630630630630630630630630630630630
100010001000100010001000124012401240124012401620
710710710710710710710710710710710710
118011801180118011801180144014401440144014401740
148315851483158516481513161516151749161517491513203520352199219921992199206520652065213821382370
104210421042104210421042104210421042104210421042117511751175117511751175110511051105110511051792
BA
770
A
E
Z
60122
FG
140
370*
O
170
1420J
N
L
432
BC
1000
A
E
U
V
F
Z
Y
G
380*
180
140
W
N
O
T
L
560
1985
J
50 140
150
10 and 25 ton models* 140 mm for presses with P-80 or P-392 handpump
50 and 100 ton models* 160 mm for BMP-5126
131®
Heavy-Duty H-Frame Presses
Weight
(kg)ZYWVUTON
Press Model Number
BMP-1117BMP-1120BAP-1116BAP-1120BAP-1230BMP-2126BMP-2130BAP-2120BAP-2230BEP-2190BEP-2270BEP-2176BMP-5126BMP-5136BAP-5233BEP-5273BEP-5233BEP-5253BMP-10246BAP-10236BEP-10286BEP-10233BEP-10253BEH-20253
H-Frame Press Dimensions (mm)
BSeries
Capacity:
10-200 tonMaximum Daylight x Width:
1339 x 1220 mmMaximum Operating Pressure:
700 bar
198198198198198198198198198198198198400400400400400400520520520520520453
107010701070107010701070107010701070107010701070420420420420420420280280280280280962
––––––––––––
100100100100100100170170170170170
–
––––––––––––
8080808080806060606060
200
––––––––––––
300300300300300300400400400400400400
––––––––––––
300300300300300300400400400400400410
––––––––––––
4242424242425252525252–
3232323232323232323232323232323232324040404040
76,5
135144137157163150168163170170187177448461485497520528974969986
103210401946
BC
1120
A
E
W
L
J2285
N
O
377
FG
380
253
254
UV
Z
(200 ton model)
‘Hydrajust’ Bed Positioning
Supplied standard with 50,100 and 200 ton presseswith double-acting cylinders.
H-Frame Press Gauges
All press models include agauge and gauge adaptor,matching the press capacity:
For more information on gauges, pleaserefer to the System Components section.
Page: 112
PressCapacity
ton
AdaptorModelNumber
Gauge ModelNumber
GF-10SGF-835GF-835GF-871GF-200S
GA-2GA-3GA-3GA-3GA-3
102550
100200
132
®
Hydraulic Technology Worldwide
SOP-106P142SOP-106PAT1SOP-236P392SOP-236PAT1SOP-506P802SOP-506BPM1SOP-506BPE1SOP-513BPE1SOP-1006BPMSOP-1006BPESOP-1013BPE
10(101)
25(232)
50(498)
100(933)
P-142PAT-1102NP-392PAT-1102NP-802PEM-5405WSPER-5405WSPER-5405WSPEM-2408WPER-2408WPER-2420W
•
•
•
••••••
•
••
••
••••••
•
•
390390
122512251335133513351335114511451145
380380510510800800800800
100010001000
54
84
54
84
54
74
74
74
74
74
74
SOP-Series, Bench and Workshop Presses
No Workshop cando without one
H Shown from left to right: SOP-236P392, SOP-1006BPM, SOP-106P142.
Press Model Number
PressCapacity
ton(kN)
Power Source
Pump Type Valve Type
H SELECTION CHART
Maximum Bed
Daylight(mm)
Maximum Bed
Width(mm) Man. Elec. Air Man. Elec.
Pump Model Nr.
RC-106RC-106RC-256RC-256RC-506RR-506RR-506RR-5013RR-1006RR-1006RR-10013
CylinderModel Nr.
Page:
8
8
8
8
8
26
26
26
26
26
26
Page:
V-Blocks
These V-Blocks aredesigned for easy fixturingof round stock and othernon-uniform materials.
Featuring precise fit into the pressbolster.
Page: 138
Stroke
(mm)
••••••
155155159159159155155333168168333
Cylinder
•••••
‘Hydrajust’Bed Positioning
Allows vertical adjustment of upper and lower bed ondouble-acting 50 and 100ton presses.
The ‘Hydrajust’ bed positioningis not designed to withstand full
cylinder capacity, only to be used forbed adjustment.
Page: 138
• Quality welded frame for maximum strength and stability• Manual, air or electric driven power source• Single or double-acting GOLDEN RING DESIGN cylinders• Moveable pump table on presses with electric drive power
source allows easy loading of large workpieces• Side to side movement of cylinder on 10 and 25-ton
presses for easy fixturing• Height adjustment of lower bed with a winch (25-ton press)• Unique ‘Hydrajust’ bed positioning device on 50 and 100-
ton presses with double-acting cylinders provides quickadjustment of daylight
= Single-Acting = Double acting
133®
SOP-106P142SOP-106PAT1SOP-236P392SOP-236PAT1SOP-506P802SOP-506BPM1SOP-506BPE1SOP-513BPE1SOP-1006BPMSOP-1006BPESOP-1013BPE
Press Model Number
Bench and Workshop Presses
SOPSeries
Capacity:
10-100 tonMaximum Daylight x Width:
1335 x 1000 mmMaximum Operating Pressure:
700 bar
A
Dimensions (mm)
{2,5}12
{3,4}5,3
{5,5}4,34,34,3131313
{0,6}1,5
{0,7}0,7
{0,3}4,34,34,31,51,51,5
113113260260312312312312432432432
Speed (mm/sec)*
RapidAdvance
Pressing
B
8383
140140252252252252332332332
C
––––
292292292292392392392
E
380380510510800800800800100010001000
F
––
6306301000100010001000124012401240
G
4704707107101180118011801180144014401440
J
––
174017401968204720472199206520652138
L
420420124312431175117511751175110511051105
N
100100198198400400400400520520520
O
––
10701070420420420420280280280
T
––––
100100100100170170170
U
––––
80808080606060
V
––––
300300300300400400400
W
––––
300300300300400400400
Y Z
––––
42424242525252
3030323232323232404040
4952
165167510522539556
101510251073
Weight
(kg)
B 160A200
390ø11
EøZ L
N
G
628
33J
E
Z
60122
FG
140
432
140*
O
371
1622J
N
L
BA
770
A
BC
1000
A
E
U
V
F
Z
Y
G
380*
180
140
W
N
O
T
L
560
1985
J
50 140
150
10 ton Bench models
25 ton models* No pump table on SOP-236PAT1
50 and 100 ton models* 180 mm for SOP-506P802
* {…} = advance speed in mm per handpump stroke.
Press Gauges
All press models (except 10-ton) include a gauge andgauge adaptor, matching thepress capacity:
For more information on gauges, pleaserefer to the System Components section.
Page: 112
PressCapacity
ton
AdaptorModelNumber
Gauge ModelNumber
GF-20SGF-50SGF-871
GA-2GA-2GA-3
2550
100
134
®
Hydraulic Technology Worldwide
• Quality welded frame for maximum strength and long life• Frame rolls easily on 4 steel roller bearings• Exclusive ‘Hydra-Lift’ bolster for effortless adjustment of
the vertical daylight• Roller head design is standard to allow lateral movement
and locking of the cylinder up to 300 mm left or right ofcentre
• All models in the quick selection chart have been matchedto an electric pump, double-acting cylinder, hose andgauge, offering the complete package
• Roll Frame design features a stationary bed with the abilityto support heavy loads
H Shown: BPR-5075
BPR-Series, Roll Frame Presses
Double-Acting Cylinder Press ModelNumber
94210481295
152159279
BedDaylight
A(mm)
BPR-5075BPR-10075BPR-20075
7308891219
Maximum Bed
WidthE
(mm)
50 (498)100 (933)200 (1995)
PressCapacity
ton (kN)
RR-5013RR-10013RR-20013
PER-3420WPER-3420WPER-3420W
ModelNumber
ModelNumber
Stroke
(mm)
RapidAdvance
Pressing
Speed
(mm/sec)
Electric Pump
333333330
74
74
74
Expert DesignedVersatility
26
26
26
Page Page
22125,4
2,31,30,6
V-Blocks
These V-Blocks aredesigned for easy fixturingof round stock and othernon-uniform materials.
Featuring precise fit into the pressbolster.
Page: 138
Cylinder adjustment
Cylinder adjustment allowshorizontal side to sidecylinder positioning.
Hydra-Lift
Allows easy, effortlessdaylight adjustment.Standard on all Roll-framepresses.
Page: 138
min. max.
135®
Roll Frame Presses
AB
CM
K
N
GJ H
L
E
F
D
H An BPR-20075 Roll Frame Press is used to remove a large shaft from this pillow-block assembly. The Roll Frame design allows this heavy part to be safely loaded with an over-head crane.
Weight
(kg)A
(min.-max.) B
Roll Frame Press Dimensions (mm)
BPRSeries
Capacity:
50-200 tonMaximum Daylight x Width:
1295 x 1219 mmMaximum Operating Pressure:
700 bar
Roll Frame Press Gauges
All press models include agauge and gauge adaptor,matching the press capacity:
For more information on gauges, pleaserefer to the System Components section.
Page: 112
PressCapacity
ton
AdaptorModelNumber
Gauge ModelNumber
GF-50SGF-871GF-200S
GA-2GA-3GA-3
50100200
152-942159-1048279-1295
387438610
C D E F G H J K L M N
971965933
264222254
730889
1219
93311431626
127146232
142016052150
162616762197
203203203
270270381
762813915
287030213200
91717674186
Press ModelNumber
BPR-5075BPR-10075BPR-20075
136
®
Hydraulic Technology Worldwide
136
A-Series, C-Clamp and Arbor Presses
C-Clamp Press• 5, 10 and 20 ton capacity • Operational in all positions
Arbor Press• 10 and 30 ton capacity• Foot mounting holes for horizontal or vertical positioning• Machined working surfaces for easier fixturing• Slotted back to simplify loading and unloading of
longer parts
H Shown from left to right: A-220, A-330 and A-310
C-Clamp
Arbor
Cylinder Model Number
Press Type
Press ModelNumber
165228305227260
Maximum Bed
Daylight
(mm)
A-205A-210A-220A-310A-330
Maximum Bed
Width
(mm)
5 (45)10 (101)20 (178)10 (101)30 (295)
PressCapacity
ton (kN)
5 ton RC-cylinder*10 ton RC-cylinder*25 ton RC-cylinder**10 ton RC-cylinder*RC-308*
8
8
8
8
8
Push Pin A-183
For applications requiringprecision pressing, such asshaft removal and insertion.This attachment fits 10 ton
cylinders and requires the use of athreaded adaptor saddle (A-13).
Smooth Saddle A-185
For pressing applications ofdelicate parts, such asaluminium castings, thissaddle decreases surface
marks during the pressing application.Requires 10 ton cylinder and threadedadaptor saddle (A-13).
The StandardWorkshop Tools
* Recommended cylinder must be ordered separately.
** Must be limited to 20 ton.
515770
135178
Page:
10 ton BenchPresses
For 10 tonBench Pressselection see:
Page: 132
137®
C-Clamp and Arbor Presses
H
M
E
N
O
8,6(8x)
A
F
291 (A-310)375 (A-330)
D
LJ
K
C
B
12,7G
1/2"-18UN
59
Press ModelNumber
Weight
(kg)
A-205A-210A-220A-310A-330
A
Press Dimensions (mm)
B C D E F G H J K L M N O
Arbor Press A-310, A-330
For high-cycle productionapplications, the C-Clampand Arbor presses shouldbe limited to 50% of theircapacity.
ASeries
Capacity:
5-30 tonMaximum Daylight x Width:
305 x 178 mmMaximum Operating Pressure:
700 bar
H A perfect example of the force and versatility of the Enerpac A-220 C-Clamp press.
291406540414557
203283346281353
165228305227260
95152152152152
7383108135178
2626266363
517695122140
6664701925
25414497
165
–––
175203
–––
6567
–––
5498
–––
219276
717382786
11/2-16 UN
21/4-14 UN
35/16-12 UN
21/4-14 UN
35/16-12 UN
Top View Working Surface
J
FB
D
C
G
A
K
E
H
C-Clamp Press A-205, A-210, A-220
138
®
Hydraulic Technology Worldwide®
Hydraulic Technology WorldwidePress Accessories, Press Speed Chart
138
10(101)
25(232)
30(295)
50(498)
100(933)
200(1995)
PressCapacity
ton(kN)
Cylinderload
P-142 P-392 P-80 P-802P-462P-464 PEM-2305WS
PEM-5405WSPER-5405WS
PEM-2205WPEM-2405WPEM-2408WPEM-2420WPER-2408W *
PEM-3420WPER-3420W PAT-1102N
PAM-1021PAM-1041
Hand Pumps Electric Pumps Air Pumps
mm of plunger travel per handpump stroke
Two-Speed Single-Speed Two-Speed Two-Speed
At 6,9 bar air pressure
No loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoad
12––––––––––
7,81,73,40,72,60,6––––––
11,21,74,90,73,70,62,30,3––––
––––
9,00,65,50,3––––
––
37,91,4
29,01,1
17,70,78,80,3––
––
2,82,82,22,2––––––
––––––
3,63,6––––
––
26,02,8
20,02,2––
6,40,7––
––––––
20,01,9
11,01,05,40,6
121,55,30,74,30,5––––––
1231,7530,7420,6250,3130,2––
Note: Values are approximate. Cylinder speed may vary in actual application.* The 100 ton Workshop Press SOP-1013BPE includes pump model number PER-2420W.
H PRESS SPEED CHART
V-Blocks
Hydra-Lift
‘Hydrajust’BedPositioning
Two-ButtonControl
10 ton Bench10-23 ton H-frame23 ton Workshop50 ton H-frame and Workshop100 ton H-frame and Workshop200 ton H-frame200 ton Roll frame
50-100 ton Roll frame200 ton Roll frame
50 ton H-frame and Workshop100 ton H-frame and Workshop200 ton H-frame
All press models with electricoperated valves
A-110BSA-1021BSA-1021BSA-501BSA-1001A-200A-200R
IPL-R100IPL-R200
BSS-2315BSS-2310BSS-5380
–
• Facilitate positioning ofpipes and bars, or placedupside-down, to serve as aconvenient worktable
• A-110 includes one V-block• All other model numbers
include 2 V-blocks
• Allows easy, effortlessdaylight adjustments
• Includes accessory chain
• Allowing effortless daylightadjustment by moving theupper- and lower bed ondouble-acting presses
• Bolted to the cylinderplunger, both beds can bemoved up and down
• Two hand operation of thepress for maximum operatorsafety
• Call Enerpac for detailedinformation
Description Press FrameCapacity
ModelNumber
Features
mm of plunger travel per second
139®
Tension Meter and Load CellsH Shown: LH-102 and TM-5 (in middle)
DA
BC
G (2x) EF
G F
A
D
1/2"-13UNC
CB
E
5/8"-11UNC
TM, LH Series
Capacity:
900 - 275.000 kgAccuracy, % of full scale:
±2%
Direct MountedDirect Mounted LoadCell
Remote Mounted with0,6 m Hose
Remote Mounted with1,8 m Hose
4500900450090045009000
21.00045.00090.000275.000
500100500100500100020005000
10.00025.000
1002010020100200500100010002500
1217878787878
102133158170
248444444444470
102127152
236575757575786
127159310
51606060606060606060
94102102148148148148148148148
22216216846846846
2094213521672318
191/4"-20, 44,5 BC
1/4"-20, 44,5 BC
1/4"-20, 44,5 BC
1/4"-20, 44,5 BC
1/4"-20, 44,5 BC
3/8"-24, 63,5 BC
3/8"-24, 89,0 BC
3/8"-24, 101,6 BC
1/2"-13, 283,0 BC
TM-5LH-10LH-50LH-102LH-502LH-1002LH-2506LH-5006LH-10006LH-30006
ModelNumber
GaugeCapacity
(kg)
Type MinimumReading
(kg)
Gauge In-crements
(kg) A B C D E F G
Dimensions (mm)
Tension Meter TM-5• Accuracy ±2% of full scale• Zinc and bronze plated to resist corrosion• Dual-range readout in kilograms and pounds• Cushioned metal case provides safe storage and
transport
Load Cells LH Series• Accuracy ±2% of full scale• Swivel loading pad reduces eccentric loading for
improved accuracy• Maximum indicating pointer reading pre-selected forces
or to maintain maximum force readings• Dual-range readout in kilograms and pounds LH-Series
TM-5
140
®
Hydraulic Technology Worldwide
BA
AB
FAD
B
H
G
C
Hydraulic and Mechanical Pullers
ENERPAC offers a complete line of pullers with
the widest range of sizes, capacities and styles.
Whether your application requires mechanical,
hydraulic or the patented Posi Lock® system,
Enerpac can satisfy your requirements.
Made of high strength steel alloys, you can
depend on Enerpac pullers to provide years of
trouble-free operation, even in the harshest
environments.
Mechanical
An economical design for installing andremoving all press fitted or heat fittedparts such as gears, pulleys, wheels,bearings, sleeves, sprockets, pins orother stubborn parts.
Hydraulic Pullers
These hydraulic pullers eliminate time-consuming and unsafe hammering,heating or prying. Damage to parts isminimized through the use of controlledhydraulic power.
Posi Lock® Pullers
The puller that meets the safetychallenge. A control cage holds thepulling jaws securely in workingposition. This patented feature reducesthe possibility of the puller jaws slipping
off the work surface thereby increasing productivity, toollife and reducing dangerous situations for the user. ThePosi Lock® feature is available in a mechanical orhydraulic version.
Always wearSafety Goggleswhile usingpullers.
141®
BA
142 E
144 E148 E
150 E154 E
142 E146 E
144 E
142 E
147 E
143 E147 E
144 E148 E
154 E
Puller Section Overview
MechanicalCapacity 1- 30 tonMaximum Reach 55 - 585 mmMaximum Spread 50 - 580 mm
HydraulicCapacity 8 - 50 tonMaximum Reach 252 - 700 mmMaximum Spread 250 - 1100 mm
Posi Lock®
Capacity 2 - 100 tonMaximum Reach 100 - 1219 mmMaximum Spread 76 - 1778 mm
MechanicalCapacity 10 - 30 tonMaximum Reach 205 - 485 mmMaximum Spread 170 - 450 mm
HydraulicCapacity 8 - 50 tonMaximum Reach 462 - 863 mmMaximum Spread 266 - 570 mm
MechanicalCapacity 2 - 50 tonMaximum Reach 59 - 260 mmMaximum Spread 5 - 252 mm
MechanicalCapacity -Maximum Reach 110 - 145 mmaximum Spread 91- 190 mm
HydraulicCapacity 8 - 50 tonMaximum Reach 110 - 145 mmMaximum Spread 110 - 359 mm
Hydraulic Capacity 8 - 50 ton
Posi Lock®
Capacity 10 - 100 ton
Grip Pullers
Cross-BearingPuller
Bearing Puller
Puller Sets
Bearing Cup
Type and Functions Capacities Page
When selecting a puller it isimportant to consider 3 basic specifications:
Capacity:
the amount of force the puller iscapable of producing.Typically, the capacity requiredfor a job can be determined byusing the shaft diameter of thepart being pulled.For manual pullers, the centerbolt diameter of the puller shouldbe at least half the diameter ofthe shaft being pulled from.For hydraulic pullers, thecapacity in tons should be 0,28to 0,4 times the shaft diameter inmm. Use the following chart:
Shaft PullerDiameter Capacity
0 - 25 mm 10 ton25 - 50 mm 20 ton50 - 89 mm 30 ton89 - 140 mm 50 ton
Reach:
the distance between thebottom of the base and the jawflats. The puller’s reach mustequal or exceed the samedistance of the part being pulled.
Spread:
the distance between the jaws.The puller’s spread needs to begreater than the width of the partbeing pulled.
142
®
Hydraulic Technology WorldwideMP-Series, Mechanical Pullers
Cross Bearing Puller
Cross Bearing Pullers can be used inalmost any pulling orpressing application.Depending on theapplication, bearing cupand bearing pullerattachments can be usedwith the cross bearingpuller.
A
B
• Full line of Mechanical Pullers• Two, two/three and three Jaw Grip Puller designs• Puller jaws are made of forged steel and heat treated for
maximum durability and strength
B
A
B
A
B
A
B
A
2-Jaw
3-Jaw
Reversible Grip Pullers
For flexibility, reversible grip pullersincorporate two tools in one puller. Thisgrip puller uses a reversible jaw thatcombines a standard grip and a slottedgrip. Reversible grip pullers can be usedas standard grip pullers or bolt grippullers.
Lightweight &Flexible
2-Jaw
3-Jaw
Grip/Long Grip Pullers
Grip pullers are used when removing abearing, gear or pulley from a shaft. GripPullers are available in two, two/threeand three arms designs. All puller jawshave additional mounting holes to adjustto shorter long reach applications. Longarm grip pullers are also available.
H The toughest job can be done with ease. An Enerpac mechanicalpuller does not need much physical effort.
H Shown: MPR-23, MP-13, MPL-102, MPR-23, MPR-43
143®
ModelNumber
Grip Pullers
Mechanical Pullers
Bearing Puller Attachments
Bearing puller attachments can be usedwith grip, bearing andbearing cup pullers tosolve many difficultpulling applicationswhere pulling surfacesare limited.
MP-12MP-13MP-102MP-103MP-172MP-173MP-302MP-303
MPL-42MPL-43MPL-72MPL-73MPL-102MPL-103MPL-172MPL-173MPL-302MPL-303
MPR-22MPR-23MPR-42MPR-43MPR-72MPR-73
MPP-10MPP-17MPP-30
MPA-6*MPA-7*MPA-8*
MPA-6AMPA-7AMPA-8A
MPA-1MPA-2MPA-3MPA-4
A
B
Bearing Cup Pullers
Bearing cup pullers are used to removebearing cups, oil seals, bushing and sleevesfrom blind holes. Bearing cup pullers areused with corresponding cross bearingpullers when there is no point of support.When there is a point of support, a centralscrew bearing cup puller may be used byitself.
232
2/32323
22/32
2/32
2/32323
22/32
2/32
2/3
222
222
222
––––
0,20,37,57,5
11,516,525,533,5
1,42,12,53,56,08,5
13,018,523,539,0
0,30,61,01,52,13,0
3,49,5
35,0
2,42,66,0
2,42,66,0
0,72,75,7
12,5
MPSeries
Capacity:
1- 30 tonReach:
55- 585 mmSpread:
50 - 580 mm
1 (8,9)
13 (115)
17,5 (155)
30 (267)
5 (44)
7 (62)
13 (115)
17,5 (155)
30 (267)
2 (17)
5 (44)
7 (62)
10 (89)
17,5 (155)
30 (267)
–––
–––
2 (17)10 (89)
17,5 (155)
30 (267)
7070310310425425520520
175175240240360360480480580580
8080150150200200
50-17086-266116-450
25-9125-9150-190
25-9125-9150-190
5-5010-10910-12915-203
5555
300300365365460460
185185225225385385480480585585
65658585
125125
205255485
110140145
110140145
59110150180
Min.-Max.SpreadB (mm)
Max. ReachA (mm)
Number of
Jaws
Weight
(kg)
Capacity
ton (kN)
* Combinations to make: MPA-6 with MPP-10 or MPP-17, MPA-7 with MPP-10 or MPP-17, MPA-8 with MPP-17 or MPP-30
Long Grip Pullers
A
B
A
B
MPA-6, 7, 8 MPA-A
Bearing Puller Attachments
Bearing Cup Puller (Central Screw)
Bearing Cup Puller Attachment
Reversible Grip Pullers
Cross Bearing Pullers
144
®
Hydraulic Technology Worldwide
54-57 E20 E
21-22 E107 E112 E118 E
145 E146 E147 E147 E
BHP-Serie, Master Puller Sets
8 tonMaster Puller Set Capacity 20 ton 30 ton 50 ton Page:
BHP-1752 BHP-2751G BHP-3751G BHP-5751G
Included Hydraulics Set Weight E
• Hand Pump • Cylinder • Saddle• Hose• Gauge • Gauge Adaptor
Included PullersGrip PullerCross Bearing PullerBearing Cup PullerBearing Puller
• Wooden Case
Model Number E
10203040
37 kgP-142
RWH-121*–
HB-7206GF-120GA-4
BHP-1762BHP-1772BHP-180BHP-181CW-166
90 kgP-392
RCH-202HP-2015HC-7206GF-813S
GA-3
BHP-252BHP-262BHP-280BHP-282CW-166
172 kgP-392
RCH-302HP-3015HC-7206GF-813S
GA-3
BHP-352BHP-362BHP-380BHP-382CW-550
298 kgP-80
RCH-603HP-5016HC-7206GF-813S
GA-3
BHP-552BHP-562BHP-580BHP-582CW-750
Multi PurposePuller Set
H Shown: Master Puller Set BHP-3751G
• Supplied with a full hydraulic set including pump, hose,cylinder, gauge, gauge adaptor and wooden case
• All Master Puller Sets include a Grip Puller, a CrossBearing Puller, a Bearing Cup Puller and a Bearing PullerAttachment
• High quality, forged steel components provide superiorreliability and service
Maintenance engineers throughout the industry
greatly appreciate theEnerpac Master Puller sets E
H SELECTION CHART
Speed Crank and Adjusting Screw
Sets include speed crankand adjusting screw for fastcontact to work beforehydraulics are applied.
Separate Ordering of Single Purpose Pullers
All single purpose pullers canbe ordered separately. Seenext pages for details.
* Specifications of RWH-121 cylinder are the same as for RCH-121.
145®
Model Number E
Included Hydraulics Set Weight E
• Hand Pump • Cylinder • Saddle• Hose• Gauge • Gauge Adaptor
Grip Puller Model Number E
Maximum Spread** 2-jaw3-jaw
Maximum Reach** 2-jaw3-jaw
Jaw** ThicknessWidth
Adjusting Screw** DiameterLength
Grip Puller Sets
20 ton8 ton 30 ton 50 ton
BHPSeries
Capacity:
8, 20, 30 and 50 ton
Spread:
250-1100 mm
Reach:
252 -700 mm
Maximum Operating Pressure:
700 bar
10
BHP-251G56 kgP-392
RCH-202HP-2015HC-7206GF-813S
GA-3BHP-252*
4004993003002027
1"- 8 UNC
508
BHP-15222 kgP-142
RWH-121–
HB-7206GF-120GA-4
BHP-1762*2492492522521523
3/4"- 16 UNF
400
BHP-351G91 kgP-392
RCH-302HP-3015HC-7206GF-813S
GA-3BHP-352*
5938003873872438
11/4"- 7 UNC
609
Grip Puller Set Capacity
BHP-551G160 kgP-80
RCH-603HP-5016HC-7206GF-813S
GA-3BHP-552*
89910997007003039
15/8"- 5.5 UNC
762
* Grip Puller order number without hydraulics.** Dimensions in mm.
H SELECTION CHART
Model Number BHP-251G:
includes Grip Puller BHP-252 and a full hydraulic set. (Hand pump, cylinder, saddle,hose, gauge and gauge adaptor.)
Model Number BHP-252:
includes Grip Puller mechanicalparts only, for use with yourexisting hydraulics.
• Precise hydraulic control allows fast, efficient and safepulling
• High quality, forged steel components provide superiorreliability and service
• Available with and without full hydraulic set
H Shown: Grip Puller Set BHP-351G
Ordering Example
146
®
Hydraulic Technology Worldwide
Model Number E
Included Hydraulics Set Weight E
• Hand Pump • Cylinder • Saddle• Hose• Gauge • Gauge Adaptor
Cross Bearing Puller Model Number E
Spread** MaximumMinimum
Reach** MaximumAdjusting Screw** Diameter
LengthLeg** Length
LengthLengthLength
Upper Leg Ends** ThreadLower Leg Ends** ThreadBearing Cup Puller Model Number E
Bearing Puller Model Number E
Cross Bearing Puller Sets
20 ton8 ton 30 ton 50 ton
20
3040
BHP-261G62 kgP-392
RCH-202HP-2015HC-7206GF-813S
GA-3BHP-262*
351139571
1"- 8 UNC
508239419571114
3/4"- 16, 255/8"- 18, 25BHP-280BHP-282
BHP-16226 kgP-142
RWH-121–
HB-7206GF-120GA-4
BHP-1772*266106462
3/4"- 16 UNF
400210462
––
3/4"- 16, 255/8"- 18, 25BHP-180BHP-181
BHP-361G121 kgP-392
RCH-302HP-3015HC-7206GF-813S
GA-3BHP-362*
454179711
11/4"- 7 UNC
609203457711
–1-14, 351-14, 27BHP-380BHP-382
BHP-561G185 kgP-80
RCH-603HP-5016HC-7206GF-813S
GA-3BHP-562*
570220863
15/8"- 5.5 UNC
762609863
––
11/4"- 12, 3811/4"- 12, 38
BHP-580BHP-582
Attachments
Both the Bearing Cup Pullerand the Bearing Puller maybe ordered separately. (Seenext page.) • Precise hydraulic control allows fast, efficient and safe
pulling• High quality, forged steel components provide superior
reliability and service
* Cross Bearing Puller order number without hydraulics. ** Dimensions in mm.
H Shown: Cross Bearing Puller Set BHP-361G
Cross Bearing Puller Set Capacity
H SELECTION CHART
BHPSeries
Capacity:
8, 20, 30 and 50 ton
Spread:
266 - 570 mm
Reach:
462 - 863 mm
Maximum Operating Pressure:
700 bar
®
BHP-28022025140
1"- 8 UNC
147
Bearing Cup and Bearing Pullers
Bearing Puller
Bearing Puller has wedgeshaped edges for placingpuller behind hard to reachbearings, gears, etc., where
clearance prevents direct application ofgrip puller arms.The Bearing Puller can be used with theCross Bearing Puller or the Grip Puller.
20 ton8 ton 30 ton 50 ton
30BHP-180
11026110
3/4"- 16 UNF
BHP-38035950145
11/4"- 7 UNC
BHP-58035950
14515/8"- 5.5
Spread** Max.Min.
Width** Thread
20 ton8 tonCapacity 30 ton 50 ton
40BHP-282
1309
1505/8"- 18 UNF
BHP-18111435110
5/8"-18 UNF
BHP-38224515260
1"- 14 UNS
BHP-58224515
26011/4"-12 UNF
Model Number
** Dimensions are in mm.
H Shown: BHP-380
H Shown: BHP-382
Bearing Cup Puller
• Made of high strength steelalloy
• Easily adapted to CrossBearing Pullers for fast andefficient removal of the mostdifficult parts
• Adjustable to fit a variety ofbearings and seals
Bearing Puller
• Made of high strength steelalloy
• Wedge-shaped edges allowremoval of the most hard-to-grip components
• Easily adapted to CrossBearing Pullers for fast andefficient removal of the mostdifficult parts
Bearing Puller
Capacity
H SELECTION CHART
H SELECTION CHART
Bearing Cup PullerModel Number
Spread** Max.Min.
Reach** Max.Center Screw Thread
BHPSeries
Capacity:
8, 20, 30 and 50 ton
Maximum Spread:
110 - 359 mm
Reach:
110 -145 mm
Maximum Operating Pressure:
700 bar
148
®
Hydraulic Technology WorldwideBMZ-Series, Master Puller Sets
• Precise hydraulic control allows fast, efficient and safepulling
• High quality, drop-forged steel grip arms provide superiorreliability and service
• Heat treated malleable iron crosshead• Sets include light weight two-speed hand pump,
RC-Series cylinder, saddle and 4:1 safety hose
H Shown from left to right: BMZ-325, BMZ-324
Chain Attachments
Workpieces larger than thestandard grip arms allow,can easily be handled usingoptional chain attachments.
Page: 161
Gauges
Minimize the risk of over-loading and ensure long,dependable service fromyour equipment. Refer to the
System Components section for a full range of gauges.
Page: 105
Storage Cases
Sturdy steel storage casesprotect your equipment fromdust, water, grease and dirt.
Page: 178
Time-saving andEasy in Use
H BMZ-324 with short grip arms used to remove a chain wheel.
® 149
Master Puller Sets
BMZSeries
Capacity:
10 and 25 ton
Maximum Spread:
360-508 mm
Maximum Reach:
310 mm
Maximum Operating Pressure:
700 bar
BMZ-302BMZ-324BMZ-303BMZ-325
11232746
–A-12
–A-29
–HC-7206
–HC-7206
0 - 1
45
ø 168ø 205
30
1333
22 3050 - 140
185
205
ø 168ø 205
28
2295
83
75 - 360
322
205
30
333
- 207
13
ø 204ø 306ø 350
445
225
67
30105
40
75 - 508
170
114
- 310
45
13
BMZ-324
With short grip arms
BMZ-324
With long grip arms
BMZ-325
CAUTION!
When used in combinationwith chains or attachments,the maximum system
pressure must be limited to half therated pressure (350 bar).
max.50%
–RC-106
–RC-256
–P-392
–P-392
0 - 2070 - 207
114 - 310114 - 310
50 - 36050 - 36075 - 50875 - 508
10
25
Capacity
ton
Set Weight
(kg)
Set ModelNumber
Reach
(mm)min. - max.
Spread
(mm)min. - max.
Hand Pump Cylinder Saddle Hose
EP-Serie, Posi Lock® Mechanical Pullers
150
®
Hydraulic Technology Worldwide
H Shown from left to right: EP-206, EP-108
• Patented ‘Safety Cage’ jaw retention system• Roll threaded shafts for less effort when applying high
torque• Slim tapered jaws for improved gripping in tight spots• Available in 2 and 3 jaw design and inside and outside
pulling configuration• More efficient pulling, as one man can do the job where
manual pullers often require two operators
F Positioning an EP-104 3-jaw puller onthe accessory drive of adiesel engine.
For Safer and Faster Pulling
Long Jaws
Long Jaws are used toincrease the reach andspread of pullers. Theymaintain the same pulling
capacity as the standard jaws, butreduce clamping force to 25% of rating.
Page: 153
Shaft Attachments
Shaft protectors andextenders are live centersthat fit over the standardpuller shaft for tip protectionand additional reach.
Page: 153
Application Tip
In determining the correctmanual puller capacity foryour application, use thefolllowing rule:
The center bolt diameter of the pullershould be at least 1/2 the diameter of theshaft being pulled on.
Example:
A part being pulled from a shaft with adiameter of 38 mm would require a pullerwith a center bolt diameter of at least 19 mm.
3
Numberof
Jaws
232323232323
Posi Lock® Mechanical Grip Pullers
151®
1 Patented ‘Safety Cage’ guidesjaws, holding them securely ontothe part.
2 Durable forged jaws providepositive grip.
3 Jaw head provides pivot andreaction point for jaws.
4 Pin, for easy jaw removal andreplacement.
5 T-handle provides control of thepuller jaws.
6 Drive bolt with rolled threads forincreased force with reduced inputtorque.
7 Snap-ring retains cage to drive boltand provides quick removal foreasy service.
EPEPPSeries
Capacity:
2 - 40 ton
Spread Range:
12- 635 mm
Maximum Reach:
101- 355 mm
2 (17)
5 (45)
6 (53)
10 (89)
12 (106)
17 (151)
14 (124)
20 (178)
25 (222)
30 (267)
35 (311)
40 (356)
SpreadRange
(mm)min. - max.
MaximumReach
(mm)
Capacity
ton (kN)
Center BoltDiameter
(mm)
Numberof
Jaws
ModelNumber
EP-204EP-104EP-206EP-106EP-208EP-108EP-210EP-110EP-213EP-113EP-216EP-116
EPPMI-6
101101152152203203245245304304355355
12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635
Weight
(kg)
SpreadRange
(mm)
MaximumReach
(mm)
JawStyle
Jaw Length
(mm)
ModelNumber
Weight
(kg)
141416162020202029293131
1,41,83,23,65,46,45,97,3
17,220,025,830,8
168218
14 - 10125 - 133
StandardLong
StandardLong
168218
3,93,9
H QUICK SELECTION CHART INTERNAL PULLERS
H QUICK SELECTION CHART EXTERNAL PULLERSFor quick technical information see next page.
H EP-204 2 jaw puller positioned to pull a water pump.
EP-Serie, Posi Lock® Mechanical Pullers
152
®
Hydraulic Technology Worldwide
H
A
C
B
F
G
E
J
B
C
AF
E
G
H
3
Numberof
Jaws
232323232323
2 (17)
5 (45)
6 (53)
10 (89)
12 (106)
17 (151)
14 (124)
20 (178)
25 (222)
30 (267)
35 (311)
40 (356)
SpreadRange
(mm)
MaximumReach
(mm)
Capacity
ton (kN)
Center Bolt
Diameter
(mm)
MaximumTorque
(Nm)
MaximumTorque
(Nm)
Numberof
Jaws
ModelNumber
EP-204EP-104EP-206EP-106EP-208EP-108EP-210EP-110EP-213EP-113EP-216EP-116
EPPMI-6
101101152152203203245245304304355355
12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635
SpreadRange
(mm)
MaximumReach
(mm)
JawStyle
Jaw Length
(mm)
ModelNumber
141416162020202029293131
2754
102176203298237373644814
10851153
168218
14 - 10125 - 133
StandardLong
StandardLong
168218
––
H QUICK SELECTION CHART INTERNAL PULLERS
H QUICK SELECTION CHART EXTERNAL PULLERS
JawTipDetail
SlideHammer
2 and 3 Jaw External PullerEP-Series
Internal PullerEPPMI-6
EP-204EP-104EP-206EP-106EP-208EP-108EP-210EP-110EP-213EP-113EP-216EP-116
EPP-4EPP-4EPP-6EPP-6EPP-10EPP-10EPP-10EPP-10EPP-1316EPP-1316EPP-1316EPP-1316
EPX-4EPX-4EPX-6EPX-6EPX-10EPX-10EPX-10EPX-10EPX-1316EPX-1316––
––––EP-11054EP-11054EP-11054LEP-11054LEP-11354LEP-11354LEP-11654LEP-11654L
Posi Lock® Mechanical Grip Pullers
153®
Spread
A
Overall Length
B
Reach
C
Jaw Width
F
CenterBolt
Diam.
E
TipClearance
G
Tip Depth
H
HexSocket
Size(inch)
J
12 - 12712 - 12712 - 12712 - 12719 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576- 635
141416162020202029293131
151519192222252531313636
4,14,18,18,16,46,46,46,412,712,713,513,5
4,64,66,16,19,19,19,19,19,79,7
11,711,7
7/8"7/8"
11/16"11/16"11/8"11/8"11/8"11/8"
111/16"111/16"113/16"113/16"
245 - 323245 - 323323 - 476323 - 476412 - 615412 - 615489 - 736489 - 736660 - 965660 - 965
800 - 1155800 - 1155
100100152152203203245245304304355355
Note: Overall length (B) is dependent on position of center bolt.
Order: ModelNumber
SpreadRange(mm)
Reach
(mm)
EP-11054EP-11054LEP-11354LEP-11654LEP-10554L*
57 - 38138 - 55838 - 76250 - 96525 - 133
245400508635218
Order: ModelNumber
Dia-meter
(mm)
Length
(mm)
IncreasesCenter Bolt
Length(mm)
EPP-4EPX-4EPP-6EPX-6EPP-10EPX-10EPP-1316
25503150315050
19192222252535
9381238123821
ModelNumber
ShaftProtectors
ShaftExtenders
Long Jaws
SpreadRange
A
Overall Length
B
Reach
C
Jaw Width
F
Slide Rod Dia.
E
TipClearance
G
Tip Depth
H
ModelNumber
Optional accessories
EPEPPEPXSeries
Capacity:
2- 40 ton
Spread Range:
12- 635 mm
Maximum Reach:
101- 355 mm
14 - 10125 - 133
736787
168218
14,214,2
88
3,07,6
1,54,6
EPPMI-6
Dimensions (mm)
Dimensions (mm)
* EPPMI-6 only
Long JawsLong Jaws are used to increasethe reach and spread of pullers.They maintain the same pullingcapacity as the standard jaws,but reduce clamping force to 25% of rating.
Shaft Attachments
Shaft protectorsand extenders arelive centers that fitover the standardpuller shaft for tipprotection andadditional reach.
154
®
Hydraulic Technology WorldwideEPH-Serie, Posi Lock® Hydraulic Pullers
304304381381457457635635
17781778
MaximumSpread
(mm)
Capa-city
ton (kN)
Numberof
Jaws
ModelNumber
EPH-208EPH-108EPH-210EPH-110EPH-213EPH-113EPH-216EPH-116EPH-1002EPH-1003
2323232323
H Shown: EPHR-110
All Models:• Patented ‘Safety Cage’ jaw retention system• High force hydraulic system for effortless pulling of large
components• Slim tapered jaws for better gripping in tight spots• Available in 2 and 3 jaw design• More efficient pulling, as one man can do the job where
manual pullers often require two operators
100 Ton Models:• 700 bar electric pump with remote jog feature• Roller cart with power lift• Multiple pushing adaptors
100 ton Puller
The 100 ton puller is sold asan entire system. Itselectrically powered lift cartenables the puller to be
raised up to 1,5 meter above the ground.Lifting brackets allow the puller to beremoved from the cart and lifted intowork places above 1,5 meter. When notin use, the lift cart may be used as ameans to manually transport the puller.Hydraulic power is provided by a 700 bar electric pump. A remote jog switch is included forfingertip control of the removal process.
10 (101)
15 (142)
25 (232)
50 (498)
100 (933)
F The EPH-1002 quicklyand easily removes thisdrive sheeve from itsshaft.
High-Tech Pulling
Transport and Store
Conveniently stores andtransports hydraulic pullersand accessories. Order the EPT-2550 Storage
Cart and make your job easier to do!
®
Dimensions (mm)
155
Posi Lock® Hydraulic Grip Pullers
SpreadRange
A
Overall Length
B
MaximumReach
C
Jaw Length
D
Jaw Width
F
Tip Clearance
G
Tip Depth
H
Weight
(kg)Ram Point
SetsLong Jaws Lift Plates
FA
D
B
H G
C
Pump Sets
All Posi Lock HydraulicPuller Sets that include 230 VAC pumps, will featurethe following components:
Components for 115 VAC pumps areavailable on request.
EPHSeries
Capacity:
10-100 ton
Spread Range:
304-1778 mm
Maximum Reach:
203-1219 mm
Maximum Operating Pressure:
700 bar
19 - 30419 - 30425 - 38125 - 38163 - 45763 - 45776 - 63576 - 635
190 - 1778190 - 1778
498498665665846846919919
19551955
20320324524530430435535512191219
23723727027034834841341312191219
22222525313136367676
7,47,411,211,212,912,915,015,088,988,9
6,96,99,19,19,79,7
11,711,788,988,9
6,47,3
10,011,321,325,040,845,4771907
EPH-155EPH-155EPH-155EPH-155EPH-257EPH-257EPH-508EPH-508
––
EPH-11054EPH-11054
EPH-11054LEPH-11054LEPH-11354LEPH-11354LEPH-11654LEPH-11654L
––
EPH-11052EPH-11052EPH-11052EPH-11052EPH-11352EPH-11352EPH-11652EPH-11652
––
2Jaw
Puller
3Jaw
Puller
EPHR208EPHS208EEPHR210EPHS210EEPHR213EPHS213EEPHR216EPHS216EEPHR108EPHS108EEPHR110EPHS110EEPHR113EPHS113EEPHR116EPHS116E
EPH-208EPH-208EPH-210EPH-210EPH-213EPH-213EPH-216EPH-216EPH-108EPH-108EPH-110EPH-110EPH-113EPH-113EPH-116EPH-116
RC-106RC-106RC-1510RC-1510RC-2514RC-2514RC-5013RC-5013RC-106RC-106RC-1510RC-1510RC-2514RC-2514RC-5013RC-5013
152152254254362362336336152152254254362362336336
–EP-1E
–EP-1E
–EP-1E
–EP-2E
–EP-1E
–EP-1E
–EP-1E
–EP-2E
10272238445387
12311282339485791
127
10101515252550501010151525255050
H SETS SELECTION CHART
Optional Accessories
Weight
(kg)
Style SetModelNumber*
Capa-city(ton)
Basic Puller Cylinder Stroke
(mm)
PumpSet
Order: Model Number
SpreadRange(mm)
Reach
(mm)
EPH-11054LEPH-11354LEPH-11654L–
38 to 55838 to 76250 to 965
–
401508660
–
Specifications: Long Jaws
PumpHoseGaugeAdaptor
PUJ-1200EHC-7210G-2535L
–
PEM-3208EHC-7210G-2535LGA-3
EP-1EPump Set
EP-2EPump Set
* Standard set shipped with 230 VAC pump.
Enerpac Hydraulic Tools ®
Hydraulic Technology Worldwide
K
K
H
D
BC
K
K J
F
A
BC
C
D
J
GA
B
C
F
E
ENERPAC Hydraulic Tools are designed to
survive your toughest applications. Backed by
the World Standard Guarantee, you can
depend on your Enerpac tool to get the job
done, again and again.
Whatever your requirement, you will find an
Enerpac tool to solve your problem, increasing
productivity and safety. For cutting, punching,
bending, pressing, spreading and pulling,
make Enerpac your tool selection.
Hydraulic System Set-up
Check out our ‘Yellow Pages’section for help on system set-ups and valving configurations.
Page: 93
Pump and Tool Sets
Most hydraulic toolsin this section areavailable in sets,
for a perfect tool-pump match.
Page: 158
WalkPac
156
Tool and Pump Sets
Maintenance Sets
Punches
Spread Cylinders
Machine Lifts
Load Skates
Hydraulic Cutters
Nut Splitters
Flange Spreaders
Pipe Benders
Industrial Storage Cases
2,5-12,5(22 -116)
35-50(311-445)
0,75-1,00(6 -8,9)
8,5-20(75 -178)
1-80(8,9 -712)
3-20(26 -178)
5-90(45 -801)
5-10(45 -101)
Nominal Bore15-100 mm
157®
Tool Section Overview
ST
MS
SP
WR
SOH
ER
WHCWMC
NC
FS
STB
CM
158 E
160 E
164 E
168 E
169 E
170 E
172 E
174 E
175 E
176 E
178 E
Tool type and functions SeriesCapacityton (kN)
Page
ST-Series, Tool and Pump Sets
158
®
Hydraulic Technology Worldwide
• Optimum match of individual setcomponents
• Pre-selected combinations, ready-for-use• Including pump, hose, gauge and gauge
adaptor and tool
PerformanceMatched Tool andPump Sets
H Here a hand pump-nut splitter set STN-1924H isused for a railroad maintenance job.
Flange Spreader
Separates pipe flanges with ease, enabling efficient maintenance tasks.
Nut Splitter
Splits nuts quickly and safely in seconds.
Punch
Designed for punching round, square or oblong holes through mild steel up to 12,7 mm thick.
Cutter
Cuts a wide range of steel wire, rope, bar, cable, strand and bolts.
H1 Tool Selection
Refer to the pages indicated for moretechnical information.
Page: 175
Page: 174
Page: 164
Page: 172
Punch-Electric Pump Set
The SP-35S light weightpunch is also available in aset with the PUD-1100Eelectric pump.
See the light weight hydraulic punchpage for more detailed information.
Page: 165
H Shown: STN-1924E
H2 Pump Selection (refer to the pump section for technical information) Accessories included
Tool and Pump Sets
159®
5 (45)
10 (101)
5 (45)
10 (89)
15 (134)
20 (178)
35 (311)
50 (445)
90 (801)
35 (311)
4 (25)
20 (178)
3 (27)
FS-56FS-109
NC-1319NC-1924NC-2432NC-3241NC-4150NC-5060NC-6075SP-35S
WHC-750WHC-1250WHC-3380
STF-56H–
STN-1319H*–––––––
–––
–STF-109H
–STN-1924HSTN-2432HSTN-3241HSTN-4150H
––
STP-35H
STC-750HSTC-1250HSTC-3380H
––
–––––
STN-5060HSTN-6075H
–
–––
–STF-109B
STN-1319BSTN-1924BSTN-2432BSTN-3241BSTN-4150B
––
STP-35B
STC-750BSTC-1250BSTC-3380B
–STF-109A
STN-1319ASTN-1924ASTN-2432ASTN-3241ASTN-4150A
––
STP-35A
STC-750ASTC-1250ASTC-3380A
HC-7206HC-7206
HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206HC-7206
HC-7206HC-7206HC-7206
GP-10SGP-10S
GP-10SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10SGP-10S
GP-10SGP-10SGP-10S
GA-4GA-2
GA-2GA-2GA-2GA-2GA-2GA-2GA-2GA-2
GA-2GA-2GA-2
Hand Pump
P-142
Hand Pump
P-392
Hand Pump
P-80
WalkPac**Battery Pump PBM-12001E
Turbo Air Pump
PAT-1102N
Hose ModelNumber
Gauge ModelNumber
Gauge AdaptorModel Number
Ordering example:
STF-109B
This set consists of:1. the 10 ton flange spreader FS-109,
2. the PBM-12001E WalkPac, battery powered light weight andportable electric pump
3. an HC-7206C hose including malecouplers on both ends
4. a GP-10S gauge with gauge adaptorGA-2
Note: See the relevant tool or pump sections in this catalog for full product descriptions.
* Includes GA-2 gauge adaptor. ** WalkPac™ sets feature HC-7206C hose.
STSeries
Maximum Operating Pressure:
700 bar
Flange Spreaders
Nut Splitters
Punches
Cutters
TOOL AND PUMP SETSELECTION:
E1 Select the tool typeand capacity
E2 Select the pump to usewith it
E3 Find the set modelnumber in the bluematrix
ToolCapa-
city
ton (kN)
Tool ModelNumber
Set ModelNumber
MS2-4MS2-10MS2-20MS2-1020
2,5 (22)5 (50)
12,5 (116)5-12,5 (50-116)
35401959
266395
158
P-142P-392P-392P-392
HC-7206HC-7206HC-7206HC-7206
RC-55RC-106RC-256
RC-102, -106 and -256
GP-10SGP-10SGP-10SGP-10S
GA-2GA-2GA-2GA-2
MS2-Series, Maintenance Sets
160
®
Hydraulic Technology Worldwide
• All sets include Enerpac pump, hose, cylinder and gauge• Lock-on or threaded connectors• Complete maintenance set for almost every maintenance
application
The UniversalHydraulic Tool Box
Maintenance Sets
Enerpac Maintenance sets are acomplete assortment of hydraulic
powered tools. Using these setsallows you to quickly configure a uniquetool to meet your most difficult jobs.Built around the Enerpac light weighthand pump, hose and cylinder, thesesets enable you to push, pull, lift, press,straighten, spread and clamp with forcesup to 12,5 ton.
H QUICK SELECTION CHART
Capacityusing attachments*
ton (kN)
Number ofAttach-ment
Compo-nents
Weight
(kg)
* If no attachments are being used, capacity is double these values. Maximum operating pressure is then 700 bar.
H Shown: MS2-10
F Clamping a workpiece is just one ofthe many applications for theEnerpac maintenance sets.
More Information
For detailed information onall included attachments, see the next pages.
Page: 162
Universal Maintenance Sets
161®
CAUTION!
When cylinders are usedwith maintenance set attachments or components,
the maximum system pressure must belimited to half the rated pressure (350 bar).
max.50%
MSSeries
Capacity (using attachments):
2,5-12,5 tonMaximum Operating Pressure:
350 barH APPLICATION EXAMPLES
■3 Collar Toe
■4 Flat Base
■21 Lock Pins
■18 Chain with Hook
■1i Threaded adaptor
■8 Collar Clamp Head
■27 457 mm Extension Tube
■21 Lock Pin
Lock Pin ■21
Smooth Saddle ■11 attached to the plunger
using a Threaded Adaptor ■1ii
Double Chain Plate ■17 attached to the plunger using
a Threaded Adaptor ■1ii
■6 Lock-on Clamp Toe
■15 Rubber Flex Head
■27 127 mm Extension Tube
127 mm Extension Tube ■27 ■27 254 mm Extension Tube■22 Lock-on Connector
■19 Pipe Coupling
■1 Threaded adaptor
■16 Single Chain Plate
■18 Chain with Hook
■■10 Serrated Saddle,attached to the Plunger using a Threaded Adaptor ■1i
■2 Base Attachment
■4 Flat Base,attached to the Base Attachmentusing a Threaded Connector ■5
■17 Double Chain Plate,attached to the BaseAttachment ■2 using aThreaded Adaptor ■5
Model No.A-23
A-13
A-28
ton
2,5
5,0
12,5
A3/4"- 16 UN
1"- 8 UN
11/2"- 16 UN
AC D
B
Set Model Number MS2-4 MS2-10 MS2-20 MS2-1020Base/Collar/Plunger Attachments 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton
■1 Threaded Adaptor A-23 A-13 A-28 A-13 andA-28
■2 Base Attachment A-25 A-21 A-27 A-21 andA-27
■3 Collar Toe A-1034 A-20 A-595 A-20 andA-595
■4 Flat Base MZ-4010 A-14 A-243 A-14 andA-243
■5 Threaded Connector A-545 A-10 — A-10 (2x)
■6 Lock-On Clamp Toe — A-8 — A-8
■7 Threaded Plunger Toe A-530 A-6 — A-6
■8 Collar Clamp Head MZ-4011 A-192 — A-192
■9 Spreader Toe — A-305 — A-305
■10 Serrated Saddle A-531 A-18 — A-18
■11 Smooth Saddle — A-185 — A-185
■12 90° V-Base A-532 A-15 — A-15
■13 Plunger Base — — A-607 A-607
■14 Wedge Head A-629 A-129 — A-129
■15 Rubber Flex-Head A-539 A-128 — A-128Chains and Attachments for Pulling 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton
■16 Single Chain Plate A-558 A-132 A-238 A-132, -238
■17 Double Chain Plate — A-5 (2x) — A-5 (2x)
■18 Chain with Hook A-557 (2x) A-141 (2x) A-218 (2x) A-141 (2x) andA-218 (2x)
Tubes, Connectors and Adaptors 2,5 ton 5,0 ton 12,5 ton 5,0-12,5 ton
■19 Pipe Coupling A-544 A-19 (2x) A-242 (2x) A-19 (2x) andA-242 (2x)
■20 Spreader WR-5 A-92 — A-92
■21 Lock Pin MZ-4013 (4x) A-16 (4x) — A-16 (4x)
■22 Lock-On Connector MZ-4007 (3x) MZ-1050 (2x) — MZ-1050 (3x)
■23 Male Lock-On Adaptor MZ-4008 (2x) MZ-1051 — MZ-1051 (2x)
■24 Female Lock-On Adaptor MZ-4009 MZ-1052 — MZ-1052
■25 Adjustable Extension — A-285 — A-285
■26 Slip-Lock Extension A-650 — — —
■27 Extension Tubes 76 mm long MZ-4002 — — —127 mm long MZ-4003 MZ-1002 — MZ-1002254 mm long MZ-4004 MZ-1003 A-239 MZ-1003
and A-239457 mm long MZ-4005 (2x) MZ-1004 A-240 MZ-1004 (2x)
and A-240584 mm long MZ-4006 (2x) — — —762 mm long — MZ-1005 A-241 MZ-1005 (2x)
and A-241
■28 Case CM-6 CW-166 CW-166 CW-350Weight (complete set in case) 26 kg 63 kg 95 kg 158 kg
MS2-Series, Maintenance Sets
162
®
Hydraulic Technology Worldwide
* A-243 is a round base model
Note: All dimensions in millimetres.B
28
31
47
C
26
55
69
D3/4"- 14 NPT
11/4"- 111/2 NPT
2"- 111/2 NPT
■1 Threaded Adaptor
Model No.A-25
A-21
A-27
ton
2,5
5,0
12,5
AD
C
B
■2 Base Attachment
Model No.A-545
A-10
ton
2,5
5,0
A3/4"- 14 NPT
11/4"- 14 NPT
B
AA
B
35
41
■5 Threaded Connector
Model No.A-8
ton
5,0
A
17
B
28
B
C
D
A
C
50
D
57
■6 Lock-on Clamp Toe
A3/4"- 14 NPT
11/4"- 111/2 NPT
2"- 111/2 NPT
B
50
57
63
C
12
12
12
D
44
65
98
Model No.A-1034
A-20
A-595
ton
2,5
5,0
12,5
B
C
D
A■3 Collar Toe
A
11/2"- 16 UN
21/4"- 14 UN
35/16"- 12 UN
B
54
80
103
C
50
57
51
D
31
57
80
Model No.MZ-4010
A-14
A-243*
ton
2,5
5,0
12,5
C
D
B
A■4 Flat Base
A3/4"- 14 NPT
11/4"-111/2 NPT
2"- 111/2 NPT
B
114
165
165
C
31
35
58
D
63
88
165
Base/Collar/Plunger AttachmentsCAUTION!
When cylinders are used with maintenance setattachments or components, the maximumsystem pressure must be limited to half therated pressure (350 bar).
max.50%
Universal, Maintenance Sets
163®
Model No.A-530
A-6
ton
2,5
5,0
A3/4"- 14 NPT
11/4"- 111/2 NPT
B
C
D
A
B
57
28
C
25
31
D
33
57
■7 Threaded Plunger Toe
Model No.A-629
A-129
ton
2,5
5,0
A3/4"-14 NPT
11/4"-111/2 NPT
A
C D
B
B
69
101
C
33
50
D
28
44
■14 Wedge Head
Model No.WR-5
A-92
ton
2,5
5,0
A
—
21/4"-14 UN
C
B
D A
B
223
244
C
9
35
D
94
158
■20 Spreader
Model No.A-539
A-128
ton
2,5
5,0
A3/4"-14 NPT
11/4"-111/2 NPT
A
B
C
B
44
86
C
69
86
■15 Rubber Flex-Head
Model No.MZ-4013
A-16
ton
2,5
5,0
A
6,4
11,2
B
60
82
■21 Lock Pin
Model No.MZ-4007
MZ-1050
ton
2,5
5,0
A
19
33
B
A
B
79
127
■22 Lock-on Connector
Model No.MZ-4008
MZ-1051
ton
2,5
5,0
A3/4"-14 NPT
11/4"-111/2 NPT
B
AC
C
19
33
B
60
90
■23 Male Lock-on Adaptor
Model No.MZ-4009
MZ-1052
ton
2,5
5,0
A3/4"-14 NPT
11/4"-111/2 NPT
B
AC
C
19
33
B
65
96
■24 Female Lock-on Adaptor
Model No.A-285
ton
5,0
A
11/4"-111/2 NPT
B
C
AD
B
335
C
441
D
33
■25 Adjustable Extension
Model No.A-650
ton
2,5
A3/4"-14 NPT
B
C
AA
B
200
C
365
■26 Slip-Lock Extension
Model No.MZ-4011
A-192
ton
2,5
5,0
A3/4"-14 NPT
42
BA
DC
B
49
63
C
76
50
D
11/2"-16 UN
21/4"-14 UN
■8 Collar Clamp Head
Model No.A-531
A-18
ton
2,5
5,0
A3/4"- 14 NPT
11/4"- 111/2 NPT
AC
B
C
27
38
D
31
50
■10 Serrated Saddle
Model No.A-532
A-15
ton
2,5
5,0
A3/4"-14 NPT
11/4"-111/2 NPT
A
C B
D
B
38
54
C
47
57
D
25
54
■12 90° V-Base
Model No.A-185
ton
5,0
A
11/4"-111/2 NPT
AC
B
B
38
C
50
■11 Smooth Saddle
Model No.A-305
ton
5,0
A
11/4"-111/2 NPT
A CD
B
B
114
C
25
D
50
■9 Spreader Toe
Model No.A-607
ton
12,5
A
2"-111/2 NPT
B
AC
B
166
C
38
Model No.A-558
A-132
A-238
ton
2,5
5,0
12,5
A
11/2"-16 UN
21/4"-14 UN
35/16"-12 UN
D
C
A
B
B
196
307
450
C
39
63
102
D
44
79
125
■16 Single Chain Plate
Model No.A-557
A-141
A-218
ton
2,5
5,0
12,5
Chain Length
1,5 meters
1,8 meters
2,4 meters
■18 Chain with Hook
Model No.A-544
A-19
A-242
ton
2,5
5,0
12,5
A3/4"-14 NPT
11/4"-111/2 NPT
2"-111/2 NPT
AC
B
B
42
49
88
C
33
54
82
■19 Pipe Coupling
Model No.A-5
ton
5,0
A
11/4"-111/2 NPT
D
A
B C
B
130
C
50
D
126
■17 Double Chain Plate
Chains and Attachments for Pulling
Tubes, Connectors and Adaptors
B
A
■13 Plunger Base
SP-Series, Light weight Hydraulic Punch
164
®
Hydraulic Technology Worldwide
HoleShape
Hole Size
(inch)
Hole Size
(mm)
BoltSize(inch)
BoltSize(mm)
Imperial** Metric**
0,31 0,380,440,530,560,690,780,810,310,380,440,50
0,31x0,750,38x0,750,44x0,750,50x0,75
7,99,511,113,514,317,519,820,67,99,511,112,7
7,9x199,5x1911,1x1912,7x19
–M8
M10M12
–M16M18
––
M8M10M12
–M8
M10M12
1/45/16
3/87/16
1/25/8–
3/41/4
5/16
3/87/16
1/45/16
3/87/16
H STANDARD PUNCHES AND DIESSELECTION CHART
• 12,7 mm thick capacity through mild steel • Round, oblong and square punches and dies are available
to solve your punching applications• Optional bevel dies allow punching through I-Beams and
channel iron• Long life Enerpac single-acting, spring return design• Durable steel case keeps tools and dies together and
provides for easy carrying and storage• CR-400 coupler included
Much Faster thanDrilling
Tool Kit SPK-10
Included with all 35 Tonpunches, this tool kit is usedto remove and install thepunch into the head.
Can be ordered as a replacement undermodel number SPK-10.
Ordering Information
The 35 ton hydraulic Punchmay be ordered by itself oras a set, including anelectric pump.
A punch or die may also be orderedseparately or as a matched set. Please refer to the Quick Selection Chartinformation on top of next page.
** Material thickness should not exceed hole diameter
H Shown: SP-35S
F This PUD-1100E is availableas a matched set with the35 ton punch.
Maximum allowable material thickness to be punched(See listing)
(in)
Bevel Punch & Die Set for INP-Beams (14%)
Model Numbers
Single-Acting, Spring Return Hydraulic Punch
165®
SPD-313SPD-375SPD-438SPD-531SPD-563SPD-688SPD-781SPD-813SPD-458SPD-549SPD-639SPD-728SPD-106SPD-125SPD-188SPD-250
SD-313SD-375SD-438SD-531SD-563SD-688SD-781SD-813SD-458SD-549SD-639SD-728SD-106SD-125SD-188SD-250
SP-313SP-375SP-438SP-531SP-563SP-688SP-781SP-813SP-458SP-549SP-639SP-728SP-106SP-125SP-188SP-250
SBD-313SBD-375SBD-438SBD-531SBD-563SBD-688
––––––––––
––
SBDU-438SBDU-531
–SBDU-688
––––––––––
Standard Punch & Die Set
Standard Punch
Standard Die
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)
7,99,7
11,212,712,712,712,712,77,99,7
11,212,77,99,7
11,212,7
7,99,7
11,212,712,712,712,712,77,99,7
11,212,77,99,7
11,212,7
6,47,99,7
11,212,712,712,712,76,47,99,7
11,26,47,99,7
11,2
6,47,99,7
11,211,211,211,211,26,47,99,7
11,26,47,99,7
11,2
6,47,99,7
11,212,712,712,712,76,47,99,7
11,26,47,99,7
11,2
6,47,97,99,7
11,210,29,77,96,47,97,99,76,47,97,99,7
3,34,84,86,46,46,46,44,83,34,84,86,43,34,84,86,4
4,86,47,97,99,77,97,97,94,86,47,97,94,86,47,97,9
6,47,97,99,7
11,210,29,77,96,47,97,99,76,47,97,99,7
6,47,97,99,7
11,210,29,97,96,47,97,99,76,47,97,99,7
6,47,97,99,7
11,210,29,77,96,47,97,98,66,47,97,99,7
Steel Qualities (see table below):
1) Mild A-72) Boiler Plate3) Structural A-364) Struct Corten (ASTM A242)5) Cold Rolled C-10186) Hot Rolled C-1050
7) Hot Rolled C-10958) Hot Rolled C-1095 Annealed9) Stainless Annealed
10) Stainless 304 Hot Rolled11) Stainless 316 Cold Rolled
* Punch oil capacity: 76 cm3
Includes the following punch and die sets: ** SPD-438, SPD-688, SPD-563 and SPD-813*** SPD-375, SPD-531, SPD-438 and SPD-688
SP-35SP-35SSP-35SPEMSP-351MSP-351PE
–Standard**Standard**Metric***Metric***
1618292132
––
HC-7206–
HC-7206
SP-35SP-35SP-35SP-35SP-35
––
PUD-1100E–
PUD-1100E
ModelNumberPunch &
Die Set
Weight
(kg)
HosePump
H QUICK SELECTION CHART Included
��� �
��
CAUTION!
Chart beneath is forreference only! Maximumallowable material thicknessto be punched varies withset wear.
Bevel Punch & Die Set for UNP-Beams (8%)
SPSeries
Capacity:
35 tonHole Sizes:
7,9- 20,6 mmMaximum Operating Pressure:
700 bar
����
��
��
8 or 14%
*
Maximum allowable material thickness to be punched (mm)
166
®
Hydraulic Technology WorldwideSP-Series, 50 ton Hydraulic Punch
• Available as a complete set including electric pump andhoses
• Double-Acting cylinder design for fast cycle times• Punch and die changeover tools included• Lifting handle for easy carrying• Adjustable power stripper prevents movement of the metal
during stripping• CR-400 couplers included
Bevel Dies
For punching applicationsthrough I-beams andchannel iron, 8° Bevel Diesare available as accessories.
Page: 167
Ordering Information
The 50 ton hydraulic Punchmay be ordered by itself oras a set with an electricpump.A punch or die may be
ordered separately or as a matched set.Please refer to the selection chartinformation.
Foot Mounting Kit
A foot mounting kit for easymounting of the 50 tonpunch to workbench orfixture is available Please order: SP-120
Depth Stop
For simplified repetitivepunching applications anadjustable Depth Stop isavailable.Order model number: SP-110
Cuts the Time SpentForming Holes
Save time using this 50 ton Enerpac Punch. E
H Shown below is the 50 tonpunch with SP-120 and SP-110 assembled.
H Shown: SP-50100
167®
Double-Acting, 50 ton Hydraulic Punch
SPSeries
Capacity:
50 tonHole Sizes:
13-26 mmMaximum Operating Pressure:
700 bar
SP-150SP-170SP-190SP-121SP-123
SD-530SD-630SD-730SD-830SD-930
SDB-530SDB-630SDB-730SDB-830SDB-930
SP-530SP-630SP-730SP-830SP-930
Standard Punch & Die Set
Standard Punch
Standard Die
8%Bevel Die Maximum allowable material thickness
to be punched (mm)*
HoleShape
Hole Size
(mm)
BoltSize
(mm)
13,516,719,823,126,2
M12M16M18M22M24
Model Numbers 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)
Steel Qualities (see table below):
1) Mild A-72) Boiler Plate3) Structural A-364) Struct Corten (ASTM A242)5) Cold Rolled C-10186) Hot Rolled C-10507) Hot Rolled C-10958) Hot Rolled C-1095 Annealed9) Stainless Annealed
10) Stainless 304 Hot Rolled11) Stainless 316 Cold Rolled
H STANDARD PUNCH AND DIE SELECTION CHART
SP-50100SP-5000E
All**All**
115174
–HC-7206
SP-50SP-50
–PER-3408E
Set ModelNumberPunch &
Die SetsModel
NumberPunch*
Weight
(kg)
Hose(2x)
Pump
H QUICK SELECTION CHART PUNCH SETS Included
* Punch Oil Capacity:Advance: 278 cm3
Retract: 229 cm3
** All standard sets from chart below.
CAUTION!
Chart beneath is forreference only! Maximumallowable material thicknessto be punched varies withset wear.
* Material thickness should not exceed hole diameter
SP-50
SP-110 SP-120
13,5––
14,214,2
13,5––
14,214,2
13,5––
14,214,2
13,5––
12,711,2
13,5––
14,214,2
12,413,012,48,97,9
8,18,18,15,64,8
10,210,210,28,97,9
12,413,012,48,97,9
12,413,012,78,97,9
12,413,012,48,97,9
• WR-15: For long stroke spreading applications• WR-5: For use in very confined work areas• A-92: Spreader attachment; threads on RC-Series 10 ton
cylinders (except RC-101)
Hydraulic Wedgie and Spread Cylinders
168
®
Hydraulic Technology Worldwide
1 (8,9)
0,75 (6)
1 (8,9)
93235
6,514,5
–
10,064,1
–
93235
94292158
223549244
–5669
515150
5115791
2,311,33,6
2842
21/4"- 14 UNS
WR-5WR-15A-92
CylinderCapacity
ton (kN)
TipClear-ance(mm)
CylinderEffective
Area(cm2)
Oil Capacity
(cm3) A B C D E F J
Weight
(kg)
ModelNumber
JA
B
EC
F
3/8"-18NPT
3/8"-18NPT
C
BJ
F
AD E
FD
C
A BEJ
WR-5
WR-15
A-92
Capacity:
0,75-1 tonTip Clearance:
9 mmMaximum Spread:
292 mmMaximum Operating Pressure:
700 bar
Dimensions (mm)
H A WR-5 wedgie cylinder is used to positiona concrete block on a construction site.
A/WRSeries
H Shown from top to bottom: WR-15, A-92, WR-5
Hydraulic Machine Lifts
169®
• For lifting heavy equipment with minimum available access• Separate hydraulic pump enhances safety• Low height lifting toe• Precision guided to reduce friction and isolate cylinder
from side-loads• Two extendible support feet provide extra stability• Includes RC-Series Cylinder with CR-400 coupler
SOH-10-6SOH-23-6
8,5 (75)20 (178)
Capacity
ton(kN)
Stroke
(mm)Minimum
A1Central
A2Maximum
A3
Total Ext. Height
C
Total BodyHeight
D F H J K
Weight
(kg)
ModelNumber
136157
2030
95110
169190
430472
294315
–65
190260
214249
7480
2645
K
K
H
D
J FA1
C
A3
A2
Load Skates
In combination with theEnerpac Machine Lifts werecommend Load Skates formoving heavy loads.
Page: 170
Best Match Hand Pump
To power your EnerpacMachine Lift, the Enerpac P-392 hand pump is an idealchoice.
Page: 54
Lifting Capacity:
8,5 - 20 tonStroke:
136-157 mmToe Clearance:
20 mmMaximum Operating Pressure:
700 bar
Toe Clearance (mm) Dimensions (mm)
SOHSeries
H Shown: SOH-10-6
ER-Series, Heavy Duty Load Skates
Move Heavy LoadsEasily and Safely
170
®
Hydraulic Technology Worldwide
• Rugged and sturdy construction for long life• Low profile construction for increased stability• Low rolling-resistance allows for easy transportation• Attachable load leveling plates and swivel turntables
for turning corners
H Load Skates may be ordered separately or as a matched set.
Machine Lifts
To place the Load Skates,the load must first be lifted.This can be done easily andsafely using EnerpacMachine Lifts.
Page: 169
Set ModelNumber
Load Skates (4)
WeightIncludinghandles
and metal box
(kg)
Set Capacity*
ton (kN)
20 (178)30 (267)60 (533)
ERS-20ERS-30ERS-60
Turntable Swivels (2)
Leveling Plates (2)
ER-10ER-15ER-30
ES-10ES-15ES-30
ELP-10ELP-15ELP-30
495575
Sets (see table) includes allcomponents necessary tohandle a variety ofapplications. Link-up Bars (2), Handles (2)
ERH-1 and Metal Box (1) EMB-1 areincluded. Designed to handle rugged moves yetare light weight for portability.
* Sets are designed to enable two skates to take full load for extra safety on uneven floor surfaces
F Heavy transport using Load Skates. The machine is first lifted, using Enerpac Machine Lifts.
H Shown: Set ER-20
Heavy Duty Load Skates
171®
TurntableSwivel
LoadSkates
B
C
F ED
A
C
E
B
D
A
D
C
A
B B
A
D
C
D
C
A
B
A
BE
C
ER-1, ER-10, ER-15, ER-30
Turntable Swivel ES-1, ES-10, ES-15, ES-30
Turntable Swivel ES-60, ES-80
Leveling PlateELP-10 ELP-15 ELP-30
Leveling PlateELP-60ELP-80
ER-60, ER-80
ERSeries
Maximum Carrying Capacity:
80 ton
LevelingPlate
A
ModelNumber
B C D E
Weight
(kg)
ContactRolls per
Skate
Rollersper
Skate
ER-1ER-10ER-15ER-30ER-60ER-80ES-1ES-10ES-15ES-30ES-60ES-80ELP-10ELP-15ELP-30ELP-60ELP-80
8410111413016818286728596
114128728596
114128
138209220270381530207219219250275360149149177270350
666674921251467141414861614141486161
–172330415094130130150190220119119134180199
–5060687685–––––––––––
554446–––––––––––
Capacity*
ton (kN)
11015306080
110153060801015306080
(8,9)(89)(133)(267)(533)(711)(8,9)(89)(133)(267)(533)(711)(89)(133)(267)(533)(711)
121513131317–––––––––––
3,45,27,3
13,031,960,93,14,54,56,7
13,718,93,73,75,3
13,818,8
Dimensions (mm)
Hydraulic Cutterheads
172
®
Hydraulic Technology Worldwide
• Single-acting, spring return on all models, except WHR-1250
• Guillotine action for easy operation• Lifting handles on larger models for easy transport• Carrying bag included for easy carrying and tool
protection• Ideal for use with most Enerpac pumps featuring
3-way valve or dump valve and 700 bar pressure rating(except WHR-1250, which requires 4-way valve)
• CR-400 coupler and dust cap included on all models
WHC/WHRSeries
Capacity:
3-20 tonCutting Capacity:
12-101 mmMaximum Operating Pressure:
700 bar
Cutter Head
Operation
Capa-city
ton
ModelNumber
Oil Capa-
city
(cm3)
Length
(mm)
SteelWire
Rope,Hemp-coreor
IWRC6x7
6x126x19
CopperWire or
Bar
Alumi-nium
Wire orBar
SoftSteelBolts
Rein-forcing
Bar
BareCopper
WireStrands
BareAlumi-niumWire
Strands
6x7
ACSR GuySteelWire
Strands
1x71x19
Tele-phoneCableCPP
Under-groundCable
(Power)
Weight
(kg)
Single-Acting
Dbl.-Act.
420133820
19,7134,4119,665,5
137,7122,9
127279381482609419
193125?
?
31
192831?
?
31
193131?
?
31
192822?
?
28
1225?
?
?
25
19315041?
31
19315042?
31
193150?
?
31
162219?
?
22
?
?
?
85101?
?
?
5085
101?
3,211,310,49,1
14,511,8
WHC-750*WHC-1250*WHC-2000WHC-3380*WHC-4000WHR-1250
Round Bar Wire Strand Cable
H Selection Chart Maximum Cutting Capacities (ø in mm)
Replacement Blades
To order 60-62HRchardened replacementblades use one of the modelnumber shown below.
For CutterModel Number
Order BladesModel Number
WHC-750WHC-1250WHC-2000WHC-3380WHC-4000WHR-1250
WCB-750WCB-1250WCB-2000WCB-3380WCB-4000WCB-1250
Tool Sets
All Hydraulic Cutter-heads marked with an
* are available as sets(pump, tool, gauge, couplers
and hose) for your ordering convenience.
Page: 158
WalkPac
* Available in sets. ? Will not cut designated material
H Shown from left to right: WHC-3380, WHC-750
Self-Contained Hydraulic Cutters
173®
H Shown from left to right: WMC-2000, WMC-750
• Rotating heads for operator convenience• Guillotine action for easy operation• Carrying bag included for easy carrying and tool
protection• Velcro straps to secure handles on larger models for easy
carry• Spring return for easy operation• Light weight self-contained tool, can be used anywhere
WMCSeries
Capacity:
3-20 tonCutting Capacity:
14-85 mmMaximum Operating Pressure:
700 bar
Capa-city
ton
Model Number
Length
(mm)
SteelWire
Rope,Hemp-coreor
IWRC6x7
6x126x19
CopperWire or
Bar
Alumi-nium
Wire orBar
SoftSteelBolts
Rein-forcing
Bar
BareCopper
WireStrands
BareAlumi-niumWire
Strands
6x7
ACSRWire
Strands
Guy SteelWire
Strands
1x7
Guy Steel Wire
Strands
1x19
Tele-phoneCableCPP
Under-groundCable
(Power)
Weight
(kg)
4 420206133
381381679679558628660
1619?
311925?
161719281931?
161719311931?
161719311922?
1619?
31385046
1619?
31415042
1619?
314150?
1414?
221619?
1414?
251619?
1617?
?
415085
?
?
?
?
?
?
85
?
?
1922?
?
?
3,63,6
11,310,46,8
10,910,0
WMC-580WMC-750WMC-1000*WMC-1250WMC-1580WMC-2000WMC-3380
Round Bar Wire Strand Cable
* Cuts 12 mm alloy chain grade 70 (type G7 transport or tie-down) or grade 80 (for overhead lifting applications)
CAUTION!
A “?” in the charts on thesepages means that thishydraulic cutter is not
designed to cut this size or type ofmaterial. Any attempt to do so may resultin personal injury and damage to the unitand will void the warranty.
Replacement Blades
To order 60-62HRchardened replacementblades use one of the modelnumber shown below.
H Selection Chart Maximum Cutting Capacities (ø in mm)
For Cutter Model Number
Blades Model Number
WMC-580WMC-750WMC-1000WMC-1250WMC-1580WMC-2000WMC-3380
WCB-750WCB-750WCB-1000WCB-1250WCB-1580WCB-2000WCB-3380
? Will not cut designated material
Hydraulic Nut Splitter
174
®
Hydraulic Technology Worldwide
• Compact and ergonomic design, easy to use• Unique angled head design• Single-acting, spring return cylinder• Heavy duty chisels can be reground• Applications include service trucks, piping industry, tank
cleaning, petrochemical, steel construction, mining, etc.
F Easily removing rusty nuts during railroad construction is just one of manyapplication examples forthe Enerpac Nut Splitter.
NC-1319NC-1924NC-2432NC-3241NC-4150NC-5060NC-6075
M6-M12M12-M16M16-M22M22-M27M27-M33M33-M39M39-M48
10 - 1919 - 2424 - 3232 - 4141 - 5050 - 6060 - 75
5101520355090
15206080
155240492
48627288
105128181
1,22,03,04,48,2
11,834,1
284051667490
110
19262936455472
7101317212326
170191222244288318393
4054647594
106156
Bolt Range Hexagon NutRange
(mm)
Capa-city
ton
OilCapa-
city (cm3)
Weight
(kg)
ModelNumber
A B C D F H
D
F
B
H
3/8"-18NPT
A
C
Capacity:
5-90 ton
NCSeries
Bolt Range:
M6-M48Maximum Operating Pressure:
700 bar
Ordering Notes: Maximum allowable hardness to split is HRc-44. Not to be used on square nuts.
For Jobs ‘On-the-Road’Nut Splitter Set NC-2450Q
Set in metal case with NC-2432, NC-3241,NC-4150, couplers andspare chisels.
Dimensions (mm)Enerpac NutSplitters
Nut Splittersinclude a sparechisel, a spare
set screw and the wrenchused to secure the chisel.A CR-400 coupler isstandard.
Tool Sets
All Hydraulic NutSplitters are available
as sets (pump, tool,gauge, couplers and hose) for
your ordering convenience.
Page: 158
WalkPac
H Shown from left to right: NC-3241, NC-1319, NC-1924
Pipe Size (mm)
FS-56 FS-109
For flanges that require larger spreadingdistance and have a larger joint, anoptional larger wedge is available .
F-109-7For Model Order Model Number
FS-56 and FS-109
Hydraulic Flange Spreader
175®
• Light weight, ergonomic design for ease of use• Adjustable jaw widths from 59 mm to 224 mm for a wide
range of applications• Single-acting, spring return RC-Series cylinders for fast
trouble-free operation
FSSeries
Capacity:
5 and 10 tonSpread:
59 - 224 mmMaximum Operating Pressure:
700 bar
J
H
F
C
E
B
A
I
MaximumFlange
Thickness(mm)
Stud Size
(mm)
StandardWedge
(mm)
Capa-city
ton
Stroke
(mm)
OilCapa-
city(cm3)
ModelNumber
A B Min. Max.
C
Dimensions (mm)
E F H I J
Weight
(kg)
2 x 572 x 92
19 - 2831- 41
3 - 283 - 28
510
3854
24,678,7
5961
163224
201158
6988
2538
206273
1931
2,35,4
209279
76108
FS-56FS-109
Tool Sets
Both Hydraulic FlangeSpreaders are available assets (pump, tool, gauge,couplers and hose)
for your ordering convenience.Page: 158
WalkPac
Flange Spreader Matching Chart
ASA Rating
(bar)
1020273562
103172
127 - 50863 - 35563 - 30463 - 25412 - 15212 - 8812 - 63
558 - 1066406 - 711355 - 609304 - 508203 - 406101 - 20376 - 101
H Shown: FS-56
STB-Series, Pipe Bender Sets
176
®
Hydraulic Technology Worldwide
H Shown: STB-101H
• Bends with smooth, wrinkle-free bends• Light weight heat treated aluminium bender frame• All sets contain angle indicator Z-12091 for
accurate bending• Powered by hand, air or electric pump• Genuine Enerpac cylinders, including HC-7206 hose
(Eject-O-Matic bender sets include 2 hoses)• Set includes sturdy steel storage gauge
‘One Shot’ and ‘Sweep’
One shot shoes give a 90° bendwithout resetting.
Sweep shoes are used where increasingradii are required for multiple parallelpipe installations.
Quick, Safe andWrinkle-freeBending
––
PUJ-1200E––
PUR-3409E
–PAT-1102N
––––
P-392––
P-84P-80
–
RC-1010RC-1010RC-1010RR-1010RC-2510RR-3014
CM-4CM-4CM-4CM-4CM-7CM-7
––––
65-100-
15-50
25-50
32-100
•
•
STB-101H STB-101ASTB-101ESTB-102HSTB-221HSTB-202E
* See corresponding sections of this catalog for more detailed specifications.
65477368
115196
One Shot Sweep
SetModelNumber
Electric Pump*Air Pump*Hand Pump* Cylinder* Steel CaseEject-O-
Matic
Weightincl. case
(kg)
H SELECTION CHARTPipe Range
Nominal Bore (mm)
Steel pipe is quickly Eand safely bend up to
90° using the STB-101HPipe Bender Set
Eject-O-Matic™
Eject-O-Matic benders have double-acting cylinders tohydraulic ally eject the pipe from the bending shoe.
Pipe Bender Sets
177®
Custom Ordering
If you already own an Enerpac pump andcylinder set, bender sets can be orderedwithout hydraulics. Just change the bender setmodel number suffix to “X”. Check the chart tobe sure you have the correct cylinder.
If you prefer a different pump to go with your bender set,just schange the bender set model number suffix to “N”.followed by the pump model number of your choice. See Pump Section.
STBSeries
Max. Pipe Capacity:
100 mm nominal boreStroke:
257 mmMaximum Operating Pressure:
700 bar
Bending Shoe Model Nr.
NominalInside
Diameter(mm)
Mild Steel Pipe
Max.Outside
Dia.(mm)
Max. Wall
Thickness(mm)
Max. Pipe
Schedule
BendCentreline
Radius
(mm)
Included One-Shot Bending Shoes (NB = Nominal Bore) Included Sweep Bending Shoes SetModelNumber
STB-101HSTB-101ASTB-101ESTB-102HSTB-221HSTB-202E
Z-12011Z-12021Z-12031Z-12041Z-12051Z-12061Z-12341Z-12351Z-12391Z-12392Z-12382Z-12383Z-12384Z-12385
Z-12011
(15 NB)
Z-12021
(20 NB)
Z-12031
(25 NB)
Z-12041
(32 NB)
Z-12051
(40 NB)
Z-12061
(50 NB)
Z-12341
(65NB)
Z-12351
(80 NB)
Z-12391
(90 NB)
Z-12392
(100 NB)
Z-12382
(65 NB)
Z-12383
(80 NB)
Z-12384
(90 NB)
Z-12385
(100 NB)
152025324050658090100658090100
21,326,633,442,248,360,373,088,9
101,6114,373,088,9
101,6114,3
3,74,04,55,05,05,57,07,68,06,07,07,68,06,0
8080808080808080804080808040
83115146184210235267330445508267330445508
•••
•••
••••••
••••••
••••••
•••••• • • • •
• • • •
H Bending Shoe Capacities
Swee
pO
ne S
hot
Electrical Conduit
Page: 53
Industrial Storage Cases
178
®
Hydraulic Technology Worldwide
Protect yourEquipment
CM-16, CM-34, CM-36• Protect your equipment from dust, water, grease and dirt • Constructed of durable 16 gauge steel• Reduce losses on the jobsite, maintenance area or shop• Heavy duty hinges and lifting handles• Painted with rust-resistant primer and finished in durable
enamel
CM-1, CM-4, CM-5, CM-6, CM-7• Constructed of 16 gauge steel (CM-4), 14 gauge steel
(CM-7) or 20 gauge steel (CM-1, CM-5, CM-6)• Heavy duty hinges and lifting handles
Case Size
(litres)
Length
(mm)
Length
(mm)
Width
(mm)
Width
(mm)
Height(mm)
Rear Front
ModelNumber
141932
127212453926
1076
CM-5CM-6CM-1CM-4CM-7CM-16CM-34CM-36
482596635787
1206121915241219
292177292457381609762762
117177168355457609863
1168
117177168355457609558
1168
–––––––
1219
–––––––
304
Case Dimensions Shelf Dimensions
For Your Convienience
You can order a set of fourcasters with mountinghardware for cases CM-16,CM-34 or CM-36.
The diameter is 101 mm and the treadwidth is 38 mm. Order model number:CM-44.
H When not storing the lifting system, this heavy-duty storagecase doubles as a work station.
H Shown: CM-34
179®
HModel Number Index
Page(s) H Page(s) H Page(s) H Page(s) H
AA . . 12, 109, 110
136, 162, 168AD . . . . . . . . . . . 138AH . . . . . . . . . . . 109AM . . . . . . . . . . . 110AR . . . . . . . . . . . 109AW . . . . . . . . . . . . . 12
BB . . . . . . . . . . . . . . 176BAD . . . . . . . . . . . 25BAP . . . . . . . . . 128BC . . . . . . . . . . . . . 62BD- . . . . . . . . . . 117BEH . . . . . . . . . 128BEP . . . . . . . . . . 128BFZ . . . . . . . . . . 111BHP . . . . . . . . . 144BLS . . . . . . . . . . . . 44BMP . . . . . . . . . 128BMZ . . . . . . . . . 148BP . . . . . . . . . . . . . 62BPR . . . . . . . . . 134BRC . . . . . . . . . . . 18BRD . . . . . . . . . . . 24BRP . . . . . . . . . . . 18BV . . . . . 120, 122
CC . . . . . . . . . . . . . . 108CAT . . . . . . 12, 17CD . . . . . . . . . . . 109CH . . . . . . . . . . . 109CLL . . . . . . . . . . . . 38CLP . . . . . . . . . . . 14CLR . . . . . . . . . . . 34CLS . . . . . . . . . . . 30CM . . . . . . . . . . . 178CR . . . . . . . . . . . 109
DDG . . . . . . . . . . . 117
EEAM . . . . . . . . . . . 87EGM . . . . . . . . . . 92ELP . . . . . . . . . . 170EMB . . . . . . . . . 170EP . . 150,153,155EPH . . . . . . . . . 154EPH- . . . . . . . . 155
EPP . . . . . . . . . . 153EPPMI . . . . . . 150EPX . . . . . . . . . . 153ER . . . . . . . . . . . . 170ERH . . . . . . . . . 170ERS . . . . . . . . . . 170ES . . . . . . . . . . . . 170
FF 105, 109, 175FH . . . . . . . . . . . . 109FM . . . . . . . . . . . 118FR . . . . . . . . . . . . 109FS . . . . . . . . . . . . 175FZ . . . . . . . . . . . . 111
GG . . . . . . . . . . . . . 114GA . . . . . . . . . . . 118GF . . . . . . . . . . . . 112GP . . . . . . . . . . . 112
HH . . . . . . . 106, 112
114HA . . . . . . . . . . . 106HB . . . . . . . . . . . 106HC . . . . . . . . . . . 106HF . . . . . . . . . . . . 110HP . . . . . . . . 21, 23
IIC . . . . . . . . . . . . . 122IPK . . . . . . . . . . . 138IPL . . . . . . . . . . . 138
JJBI . . . . . . . . . . . . . 12JH . . . . . . . . . . . . . . 49JHA . . . . . . . . . . . 48JHL . . . . . . . . . . . . 49JTA . . . . . . . . . . . . 48
LLH . . . . . . . . . . . . 139
MMP . . . . . . . . . . . 142MPA . . . . . . . . . 142MPL . . . . . . . . . 142MPP . . . . . . . . . 142MPR . . . . . . . . . 142
MS2- . . . . . . . . 160MSP . . . . . . . . . 164MZ . . . . . . . . . . . 162
NNC . . . . . . . . . . . 174NV . . . . . . . . . . . . 118
PP . . . . . 54, 56, 60PA . . . . . . . . . . . . . . 86PAH . . . . . . . . . . . 82P-AL . . . . . . . . . . 55PAM 84, 87, 88PAN . . . . . . . . . . . 88PAT . . . . . . . . . . . . 84PBM . . . . . . . . . . 62PBR . . . . . . . . . . . 62PC . . . 54, 58, 78PD . . . . . . . . . . . 117PED . . . . . . 70, 74PEJ . . . . . . . . . . . . 70PEM . . . . . 70, 74PEN . . . . . . . . . . . 74PER . . . . . . 70, 74PES . . . . . . 70, 74PFC . . . . . . . . . . . 78PGM . . . . . . . . . . 90PK . . . . . . . . . . . . 138PL . . . . . . . . . . . . . . 58PMB . . . . . . . . . 138PPH . . . . . . . . . . . 78PPK . . . . . . . . . . . 78PPN . . . . . . . . . . . 80PUD . . . . . . 64, 66PUF . . . . . . . . . . . 66PUJ . . . . . . 64, 66PUM . . . . . . . . . . 66PUR . . . . . . . . . . . 66
RRB . . . . . . . . . . . . . 12RC . . . . . . . . . . . . . . . 8RCA . . . . . . . . . . . 13RCH . . . . . . . . . . . 20RCS . . . . . . . . . . . 16REB . . . . . . . . . . . 12REP . . . . . . . . . . . 12RFL . . . . . . . . . . . . 88RPC . . . . . . . . . . . 62RR . . . . . . . . . . . . . 26RRH . . . . . . . . . . . 22
RSM . . . . . . . . . . 16
SSBD . . . . . . . . . 164SCH . . . . . . . . . . . 50SCL . . . . . . . . . . . 50SCP . . . . . . . . . . . 50SCR . . . . . . . . . . . 50SD . . . . . 164, 166SDB . . . . . . . . . 166SL . . . . . . . . . . . . . . 42SOH . . . . . . . . . 169SOP . . . . . . . . . 132SP . . . . . 164, 166SPD . . . . . . . . . 164SSG . . . . . . . . . 114ST . . . . . . . . . . . . . . 46STB . . . 176, 177STC . . . . . . . . . . 158STF . . . . . . . . . . 158STN . . . . . . . . . . 158STP . . . . . . . . . . 158
TT . . . . . . . . . . . . . . 116TM . . . . . . . . . . . 139
VV . . . . . . . 118, 124VA . . . . . . . . . . . . . . 87VC . . . . . 120, 122VM . . . . 120, 122
WWCB . . 172, 173WFS . . . . . . . . . . . 62WHC . . . . . . . . 172WHR . . . . . . . . 172WMC . . . . . . . . 173WR . . . . . . . . . . . 168
ZZ . . . . . . . 109, 176
2500 . . . . . . . . . 1144000 . . . . . . . . . 11411- . . . . . . . . . . . . . 6041- . . . . . . . . . . . . . 6143- . . . . . . 61, 11645- . . . . . . . . . . . . . 6172- . . . . . . . . . . . . . 6083- . . . . . . 61, 116
While every care has been taken in thepreparation of this catalog and all datacontained within is deemed accurate at thetime of printing, Enerpac does reserve the rightto make changes to the specifications of anyproduct, or discontinue any product, containedwithin this catalog without prior notice.All illustrations, performance specifications,weights and dimensions reflect the nominalvalues and slight variations may occur due tomanufacturing tolerances. Please consultEnerpac if final dimensions are critical.
®
AustraliaENERPAC, Applied Power Australia Ltd. (APSY)Block V Unit 3, Regents Park Estate391 Park RoadRegents Park NSW 2134(P.O. Box 261) AustraliaTel: +61 297 438 988Fax: +61 297 438 648
ChinaShanghai BlackhawkMachinery Co Ltd Room 907, China Record Building811, Hengshan RoadShanghai, 200030, ChinaTel: +86 21 6466 9134Fax: +86 21 6466 9139
CISENERPAC Applied Power MoscowLeninsky Prospekt 95a117313 Moscow, RussiaTel: +7 095 956 50 90Fax: +7 095 936 20 05
France, Switzerland, Turkey,Greece, Middle East, AfricaENERPAC S.A.B.P. 200, Parc d’Activités du Moulin de MassyF-91882 Massy CEDEX (Paris)FranceTél: +33 01 601 368 68Fax: +33 01 692 037 50
Germany, Scandinavia, EasternEurope, Austria, SwitzerlandENERPAC Applied Power GmbHP.O. Box 300113D-40401 Düsseldorf, GermanyTel: +49 211 471 490Fax: +49 211 471 49 28/40
Holland, Belgium, Luxemburg,ENERPAC B.V.Storkstraat 25 / P.O. Box 2693900 AG Veenendaal, HollandTel: +31 318 535 911Fax: +31 318 525 613
+31 318 535 848
HongkongENERPACRoom 907 WorkingbergCommercial Building41-47 Marble RoadNorth PointTel: +852-2561 6295Fax: +852-2561 6772
IndiaENERPAC Hydraulics (India) Pvt Ltd203 Vardhaman ChamberPlot #84, Sector 17Vashi, New Bombay 400705Maharashtra, India Tel: +91 22 763 10 62Fax: +91 22 767 03 09
ItalyENERPAC Applied Power Italiana S.p.A.Via Canova 4, 20094 Corsico (Milano)Tel: +39 2 458 274 1/2/3Fax: +39 2 486 012 88
JapanApplied Power Japan Ltd.10-17 Sasame Kita-Machi Toda-Shi, Saitama 335, JapanTel: +81 484 218 931Fax: +81 484 224 108
MalaysiaApplied Power Hytec (M) Sdn Bhd22-1, Jalan SS 15/8BSubang Jaya, 47500P.J. Selangor, West MalaysiaTel: +603 737 29 23/39/19Fax: +603 737 29 18
MexicoENERPAC Applied Power Mexico S.A. de C.V.Avenida Principal, La Paz #100Fracc. Industrial La Paz42084 Pachuca, HidalgoTel: +52 771 337 00Fax: +52 771 838 00
SingaporeApplied Power Asia Pte Ltd47 Jalan Pemimpin,#01-02 & 01-03 Sin Cheong Building Singapore 577200Thomson Road, P.O. Box 114Singapore 915704Tel: +65 258 16 77Fax: +65 258 28 47
South KoreaENERPAC Applied Power Korea Ltd.163-12 Dodang-DongChoong-Ku, Buchun-shi Kyunggi-Do (Seoul)Republic of KoreaTel: +82 32 675 08 36/37Fax: +82 32 675 30 02
Spain, PortugalENERPAC Applied PowerInternational S.A.Calle de la Imprenta, 7Polígono Industrial28108 Alcobendas (Madrid), SpainTel: +34 1 661 11 25Fax: +34 1 661 47 89
United Kingdom, IrelandENERPAC Limited Unit 3Colemeadow RoadNorth Moons MoatRedditchWorcester B98 9BPUnited KingdomTel: +44 1527 598 900Fax: +44 1527 585 500
USA, Canada, Latin America and CaribeanENERPACP.O. Box 325Milwaukee, ButlerWI 53201-0325 USATel: +1 414 781 66 00Fax: +1 414 781 10 49User Inquiries:+1 800 433 2766Distributor Inquiries & Orders:+1 800 558 0530
CanadaUser Inquiries:+1 800 426 4129Distributor Inquiries & Orders:+1 800 426 2284
World Wide Service Excellence
World WideAvailability
World StandardGuarantee
®H
ydrauc P
ower for a
ndustra
App
catons
97043.E(R) © 1997 Applied Power Inc.
Printed in the Netherlands.
E321e
Hydraulic Technology Worldwide
®
Hydraulic Technology Worldwide
CylindersPage 6-51
PumpsPage 52-92
SystemComponents
Page 105-118
Valves Page 119-125
PressesPage 126-139
PullersPage 140-155
ToolsPage 156-178
E321e
Top Related