8/9/2019 Hilti Anchor Selector
1/12
Anchor selector
10 / 20128
Anchor selector
Anchor type Base material Approvals Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalApproval
Seismicapproval
Fatigueapprovalortestreport
Shockapproval
Firetested
Mechanical anchor systemsHeavy duty anchors
HDA-T/ -TR/TF/-P/-PR/-PFundercut anchor
Anchor fastening for highloads e.g. in steelconstruction and plantconstruction
HSL-3 heavy duty anchor Fastening heavy loads e.g.from columns, high racks,machines
HSL-GR heavy duty anchor Fastening heavy loads
Medium and light dutyanchors
HSC-A(R) /-I(R) safety anchor Safety relevant fastening atfacades and ceilings whereshort embedment depth isrequired
HST/-R/-HCR stud anchor Fastening through in placeparts e.g. angles, tracks,channels, wooden beams,
etc.
HSA/-R/-R2/-F stud anchor Fastening through in placeparts like wooden beams,metal sections, columns,brackets, etc.
HSV stud anchor Fastening through in placeparts
HLC sleeve anchor Temporary fastenings inconcrete (e.g. formwork),fastening in base material of
low density
= technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
2/12
Anchor selector
10 / 2012 9
Advantages Dri ll bi t
diameter resp.anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippedgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
Automatic undercutting High load capacity Approved for all dynamic loads
Drill bit dia.:20 37 mmAnchor size:M10 M20
72
Integrated plastic section totelescope and pull down tightly
The bolt can be retorqued
Drill bit dia.:12 32 mmAnchor size:M8 M24
88
Integrated plastic section totelescope and pull down tightly The bolt can be retorqued
Drill bit dia.:12 28 mmAnchor size:M8 M20
100
Automatic undercutting Small edge distances and
spacings Small setting depth
Drill bit dia.:14 20 mmAnchor size:M6 M12
110
Quick and simple settingoperation
Setting mark
Safety wedge for certain followup expansion
Drill bit dia.:8 24 mmAnchor size:
M8 M24
130
Three setting depths Setting mark Extremely ductile steel for high
bending capacity
Drill bit dia.:6 20 mmAnchor size:M8 M24
140
Quick and simple settingoperation
Drill bit dia.:8 1 6 m mAnchor size:M8 M16
160
Short setting and removingoperation
Good loads in green concrete
Bridging of gaps
Drill bit dia.:6,5 20 mmAnchor size:
M5 M16
170
8/9/2019 Hilti Anchor Selector
3/12
Anchor selector
10 / 201210
Anchor type Base material Approval Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalAp
proval
Seismicapproval
Fatigueapprovalortes
treport
Shockapproval
Firetested
Medium and light dutyanchors
HAM hard sleeve anchor Secure fastenings in variousbase materials
HUS-HR screw anchor, stainlesssteel
Fastening channels,brackets, racks, seating
HUS screw anchor, carbon steel Fastening channels,brackets, racks, seating
HUS- 6 screw anchor, redundantfastening
1)
Fastening channels,brackets, racks, seating
HUS 6 / HUS-S 6 screw anchor 1)
Fastening light channels,brackets, interior panellingor cladding
HKD push-in anchor 1) Fastening with threadedrods for pipe suspensions,air ducts, suspendedceilings
HKV push-in anchor Fastening with threadedrods for pipe suspensions,air ducts, suspendedceilings
HUD-1 universal anchor Various applications
HUD-L universal anchor Various applications
= technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
4/12
Anchor selector
10 / 2012 11
Advantages Dri ll bi tdiameter resp.
anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippe
dgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
Wings to prevent spinning in the
bore hole Plastic cap in cone to prevent
dust entrance
Drill bit dia.:12 20 mm
Thread:M6 M12
176
Screw driven straight into basematerial
Forged on washer Matched system of screw
anchor and screw driver
Drill bit dia.:6 14 mm
178
Screw driven straight into basematerial
Forged on washer Matched system of screw
anchor and screw driver
Drill bit dia.:8 14 mm
194
Screw driven straight into basematerial
Forged on washer Matched system of screw
anchor and screw driver
Drill bit dia.:6 mm
218
Screw driven straight into basematerial
Small drill bit diameter Matched system of screw
anchor and screw driver
Drill bit dia.:6 mm
224
Visual verification of fullexpansion Small setting depth
Drill bit dia.:8 25 mmAnchor size:M6 M20
230
Visual verification of fullexpansion
Small setting depth
Drill bit dia.:8 20 mmAnchor size:M6 M16
252
Fast setting Flexibility of screw length An anchor for every base
material
Drill bit dia.:5 14 mm
256
Fast setting
Flexibility of screw length An anchor for every base
material
Drill bit dia.:
6 10 mm
262
8/9/2019 Hilti Anchor Selector
5/12
Anchor selector
10 / 201212
Anchor type Base material Approvals Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalAp
proval
Seismicapproval
Fatigueapprovalortes
treport
Shockapproval
Firetested
Medium and light dutyanchors
HLD light duty anchor Fastenings to weak materialwith cavities
HRD-U/-S frame anchor Securing support frames,timber frames, fascadepanels, curtain walling
HRD frame anchor 1)
On most hollow and solidbase material
HPS-1 impact anchor Fastening wood battens,components for electricaland plumbing installations
HHD-S cavity anchor Fastening battens, channelspanels
HCA coil anchor Temporary externalfastenings
HSP/HFPdrywall plug Fastenings in dry walls
HA8 ring/ hook anchor 1)
For suspended ceilings andother items from concreteceilings
DBZ wedge anchor 1)
Suspension from concreteceilings e.g. using steelstraps, punched band,Nonius system hanger
HT metal frame anchor Fastening door and window
frames
= technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
6/12
Anchor selector
10 / 2012 13
Advantages Dri ll bi tdiameter resp.
anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippe
dgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
Flexibility of screw length Resilient toggling action to suit
every base material
Drill bit dia.:10 mm
266
Preassembled with screw Screw of steel strength 5.8 or
stainless steel A4 (1.4401)
Drill bit dia.:10 and 14 mm
270
impact and temperatureresistant
high quality plastic
Drill bit dia.:8 1 0 m m
276
impact and temperatureresistant
high quality plastic
4 8 mm 294
Controlled setting Deliverable with or without
prefitted screw
Drill bit dia.:8 12 mm
298
Re-usable Removable
Drill bit dia.:16 mm
300
Self-drilling tip One bit for anchor and screw Removable
- 302
Quick and easy setting Automatic follow up expansion
Drill bit dia.:8 mm
304
Small drill bit diameter Quick setting by impact
extension Automatic follow up expansion
Drill bit dia.:6 mm
308
No risk of distortion or forces of
constraint Expansion cone can not be lost
Drill bit dia.:
8 10 mm
312
8/9/2019 Hilti Anchor Selector
7/12
Anchor selector
10 / 201214
Anchor type Base material Approvals Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalAp
proval
Seismicapproval
Fatigueapprovalortes
treport
Shockapproval
Firetested
Medium and light dutyanchors
HK ceiling anchor 1)
Fastening of suspendedceilings, cable trays, pipes
HPD aerated concrete anchor Various fastenings
HKH hollow deck anchor Suspension from pre-stressed concrete hollowdecks
HTB Ingenious and strong forhollow base materials
Insulation fasteners
IDP insulationfastener
Fastening of hard, selfsupporting insulatingmaterials
IZ expandable insulation fastener Fastening of soft and hard,self supporting insulatingmaterials
IDMS / IDMR insulation fastener Fastening of soft and hard,self supporting insulatingmaterials and non selfsupporting insulationmaterials
e per application = technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
8/12
Anchor selector
10 / 2012 15
Advantages Dri ll bi tdiameter resp.
anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippe
dgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
Small bore hole Quick and easy setting
Drill bit dia.:6 mm
M6
316
Approved (DIBt) Fire resistance Immediately loadable
WithoutpredrillingThread:M6 M10
322
Approval for single pointfastenings
Approved for sprinkler systems
Drill bit dia.:10 14 mmThread:M6 M10
328
Load carried by strong metalchannel and screw
Convincing simplicity whensetting
Drill bit dia.:13 14 mm
332
One piece element Corrosion resistant No heat bridge
Drill bit dia.:8 mm insulatingmaterialthickness10 150mm
336
Corrosion resistant No heat bridge Reliable bonding of plaster
Drill bit dia.:8 mm insulatingmaterialthickness
up to 180mm
340
One piece element Corrosion resistant Fire resistant
Drill bit dia.:8 mm insulatingmaterialthicknessup to 150mm
344
8/9/2019 Hilti Anchor Selector
9/12
Anchor selector
10 / 201216
Anchor type Base material Approvals Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalAp
proval
Seismicapproval
Fatigueapprovalortes
treport
Shockapproval
Firetested
Adhesive anchor systems
Foil capsule systems
HVZadhesiveanchor
Heavy-duty fastenings withsmall spacing and edgedistances
HVUadhesiveanchor
Heavy duty fastenings withsmall spacing and edgedistances
Injection mortar systems
HIT-RE500SD
Adhesive anchor in crackedconcrete
HIT-RE500
Adhesive anchor
HIT-HY200
Adhesive anchor in crackedconcrete
table per application = technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
10/12
Anchor selector
10 / 2012 17
Advantages Dri ll bi tdiameter resp.
anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippe
dgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
No expansion pressure Small edge distances and
spacing A strong and flexible foil capsule
M10 M20 350
No expansion pressure Small edge distances and
spacing A strong and flexible foil capsule
HAS M8 M39HIS-M8 - M20Rebar dia.8 40 mm
362
No expansion pressure Long working time
HIT-V M8 M30HIS-M8 - M20Rebar dia.8 3 2 m m
382
No expansion pressure Long working time
HIT-V M8 M39HIS-M8 - M20Rebar dia.8 40 mm
424
No expansion pressure Flexibility in terms of working
time No styrene content No plasticizer content Environmental protection due to
the minimized packaging
HIT-V M8 M30HIS-M8 - M20Rebar dia.8 3 2 m m
490
8/9/2019 Hilti Anchor Selector
11/12
Anchor selector
10 / 201218
Anchor type Base material Approvals Appl ication
Crackedconcrete
Uncrackedconcrete
Lightweightconcrete
Aeratedconcrete
Solidbrickmasonry
Hollow
brickmasonry
Pre-stressedconcretehollowdeck
EuropeanTechnicalAp
proval
Seismicapproval
Fatigueapprovalortes
treport
Shockapproval
Firetested
Injection mortar systems
HIT-HY150 MAX
Adhesive anchor in crackedconcrete
HIT-CT 1 Hilti Clean technologyadhesive anchor
HIT-HY150
Adhesive anchor
HIT ICE Adhesive anchor for lowinstallation temperatures
HIT-HY70
Universal mortar for solidand hollow brick
= technical report 1) redundant fastening
8/9/2019 Hilti Anchor Selector
12/12
Anchor selector
10 / 2012 19
Advantages Dri ll bi tdiameter resp.
anchor size
Specification Setting Page
Steel,galvanised
Steel,sheradised,
hotdippe
dgalv.
StainlesssteelA2(1.4303)
StainlesssteelA4(1.4401)
HCR
steel(1.4529)
Externalthread
Internalthread
Pre-setting
Through-fastening
No expansion pressure No styrene content No plasticizer content Environmental protection due to
the minimized packaging
HIT-V M8 M30HIS-M8 - M20
Rebar dia.8 2 5 m m
560
No expansion pressure Environmentaly and user
friendly: clean of criticalhazardous substances
HIT-V M8 M24 616
No expansion pressure No styrene content No plasticizer content Environmental protection due to
the minimized packaging
HIT-V M8 M30HIS-M8 - M20Rebar dia.8 2 5 m m
632
No expansion pressure HAS M8 M24HIS-M8 - M20Rebar dia.8 2 5 m m
674
No expansion pressure mortar filling control
with HIT-SC sleeves
Drill bit dia.:10 22 mmThread:M6 M12
708
Top Related