FC 007 US 60K23 v1_01
HI-PE/CFMETAL DETECTORS
FOR HIGH FLOW RATE
BANKING APPLICATIONS
FC 007 US 60K23 v1_01
- 2 -
HI-PE/CFMETAL DETECTORS FOR HIGH FLOW RATE BANKING APPLICATIONS
This metal detector is designed to detect firearms to allow a high flow entrance into Banks The HI-PE/CF combines the characteristic reliability of CEIA products with very high discrimination of metal personal effects, even if these are numerous and of large dimensions.
In banking applications, the technical innovations implemented in the HI-PE/CF Firearms Detector now
Traditional cabin bank entrances: the situation today.
The nuisance alarms in current cabin bank entrances fitted with metal detectors are mainly due to mobile phones and female customers’ handbags and their contents.
In these systems, if the metal detector is correctly calibrated to detect conven-tional and light-alloy firearms such as the Beretta Model 950 B, 6.35 calibre, the rate of nuisance alarms varies from 35% to 55%.
A reduction in sensitivity reduces the alarm rate, but is not a solution in that it also reduces security, allowing medium-sized firearms to be brought in.
NO!allow the number of people stopped to be reduced to a fifth, compared with the best Metal Detectors available until today, while maintaining the same level of security.
From now on mobile phones, make-up containers, keys, coins, PDA’s, and other such items can be allowed into bank branches, creating a virtually-open bank for customers while simultaneously maintaining the detection of dangerous weapons.
The HI-PE/CF has already been implemented in numerous bank installations both throughout the world.
The HI-PE/CF represents the definitive complete, flexible and highly-integrated answer for a High Flow Rate Bank Application.
PASS!
FC 007 US 60K23 v1_01
- 3 -
The HI-PE/CF Firearms Detector
CEIA recently introduced a Weapons Detector designed especially for the bank access control sector, with the following functional results:
FIREARMS
Detection of conventional and light-alloy firearms.
PERSONAL ITEMS
Fluid, even in the presence of numerous and/or large metal personal effects.
Mobile phones are tolerated.
HIGH FLOW RATE
An “Open Bank” and Security for staff and customers.
Main characteristics
This is an innovative, specific device for the detection of firearms, whether magnetic or non-magnetic, with simultaneous discrimination of personal metal effects such as:
- Large quantities of keys or coins
- Mobile phones
- Walkmans and/or Palm-top organizers
- Metal cosmetics containers
- Watches and jewellery
FC 007 US 60K23 v1_01
- 4 -
How it works
The two figures below illustrate the difference in response between a traditional metal detector and the new HI-PE/CF Firearms Detector. Note the clear increase in discrimination achieved by the latter:
Traditional Metal Detector HI-PE/CF Firearms Detector
Airlock Entrances with HI-PE/CF Firearms DetectorComparison with entrances with traditional metal detectorThe entrance with the HI-PE/CF Firearms Detector allows 93 out of 100 people through while guaranteeing detection of conventional and light-alloy firearms (Security Reference: NILECJ AM7 Beretta Model 950 B Calibre 6.35 in light alloy).The comparison was carried out on two entrances installed at a bank branch, originally equipped with traditional metal detectors and subsequently updated with HI-PE/CF Firearms Detectors.
A unique contribution to Security
The HI-PE/CF Firearms Detector incorporates the experience accumulated from more than 25,000 metal detectors installed in banks.
The use of this detector, together with other complementary technology, allows construction of bank access control systems with innovative characteristics in terms of Flowrate and Security. 0
5
10
15
20
25
30
35
40
%
Percentuale di allarmi intempestivi
Cabina con metal detector Cabina con HI-PE/CF
7%
38%
Percentage of nuisance alarms
Entrance with metal detector Entrance with HI-PE/CF
NILECJ AM7
NILECJ AM7
Alarm Threshold Alarm Threshold
FC 007 US 60K23 v1_01
- 5 -
The transit of metal personal effects in common daily use through Metal Detector checkpoints generates signals which often exceed those of some types of fire-arm available on the market. Discrimination of these by the Metal Detector therefore becomes a necessary condition for establishing access systems with high flow rates.
As a solution to this problem, CEIA presents its new HI-PE/CF Metal Detector which, with its detection functions based on an innovative signal analysis system, raises the threshold of discrimination between medium-sized fire-arms and personal effects to a level up to 500% above that of the 02PN8 HI-PE model.
The advantages of using this new Metal Detector are the following: a notable reduction in the need for the bank staff to act to check inward- and outward-bound traffic; increase in convenience of access to the bank for customers; and, not least, the opportunity to increase the level of security.
Statistical data obtained in real operating situations with the HI-PE/CF Metal Detector have demonstrated the almost total elimination of false alarms compared with earlier systems, at the same level of detection capability relating to fire-arms of conventional construction and in light metal, such as the Beretta 6.35mm.
The HI-PE/CF Metal Detector keeps the same dimensions and programming characteristics as the 02PN8 HI-PE Metal Detector, so that it can be fitted into systems which were designed for the earlier model. As far as its application is concerned, the parameters already in use for walk-through Metal Detectors remain valid, in particular the importance of the electromagnetic compatibility of the metal structure.
In order to guarantee the levels of performance described above, use of this new Metal Detector is restricted to cabins previously certified for electromagnetic compatibility with the HI-PE/CF Metal Detector.
HI-PE/CFMetal Detector for high flow rate Banking Applications
Main Features
• Digitally adjustable sensitivity with a wide range of values.
• International Standards: Direct selection of the International Security Standards.
• Very high discrimination.
• Very high immunity to electromagnetic and mechanical interference.
• All functions programmable and controlled by a microprocessor.
• Programming: via built-in keypad and RDU or RS232/RS485 serial connection to PC or computer network.
• Programming access protected by both a mechanical lock and by two software level passwords.
• Automatic synchronization between two or more metal detectors, at a distance of up to 5 cm, from each other, without using cables.
• Professional high integration and high reliability electronics.
• Electronic control unit separated from the archway.
• No need for initial or periodic calibration.
• Easy maintenance. The electronic control unit can be replaced in less than one minute.
• Color: light gray RAL 7040
Technical DataAlarms
Acoustic signal:
• Buzzer - 90 dBA (1 m)
Relay outputs:
• NO, NC, C exchange contact - 1 A - 24 Vdc
Reset:
• PP input, automatic or manual, N.C. contact
Inhibition:
• INI input, N.O. contact
Selfdiagnosis:
• Embedded, with intermittent acoustic signal
Certifications and conformity
• Harmless to wearers of pacemakers or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
• Satisfies EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC).
CEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), their accessories and optionals, to the prices and conditions of sale.
Installation Data
Power Supply:
• 20... 30 Vdc, 25W max
Inputs:
• RS-232C interface for the connection with a terminal, a computer or an external modem
• RS-232C interface for the network connection with other CEIA metal detectors
Temperature and relative humidity:
• Working temperature: -10°C ... +65 °C (14...149°F);
• Storage temperature: -35°C ... +70 °C (-31...158°F);
Relative humidity: from 0 to 95% (without condensation)
Dimensions and weight of the control unit:
• 380 x 157 x 82 mm (15”x6.2”x23.3”) / 1.2kg (2.7lb)
Accessories / Options
• Metallic test samples.
FC 007 US 60K23 v1_01
- 6 -
UW+110 (4 .3” )
ø10 (3/8”) L=3000 (10ft)
Rmin 40 (1.5”)
UW
TH
600 (23.6”)
60 (
2.4”
)
629 (24.8”)
657 (26”)
ø6.5 (1/4”)60 (2.4”)
UW+ 50 (2”)
50 (2” )
Dimensions02PN8 HI-PE/CF-PN-AS-600
HI-PE/CF-PN-AS-600UW 680 ... 820 (26.8...32.3”)
TH 2172 (85.5”)2220 (87.4”)
Model
UW
UW + 115 (4" 1/2)
2050
(80
" 3 /
4)
660 (26")
2255
(88
" 3 /
4)
UW + 50 (2")
630
(24"
3/4
)
ø 6.5 (ø 1/4")
Dimensions02PN8 HI-PE/CF-PN-TR-600
HI-PE/CF-PN-TR-600
UW 720 / 820 (28.3”/32.3”)
Model
OptionsTransit CounterTwo photocells fitted into the antennae allow counting of transits, alarms and percentage of alarms.
CEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), their accessories and optionals, to the prices and conditions of sale.
Dimensions in mm (inches)
Dimensions in mm (inches)
FC 007 US 60K23 v1_01
- 7 -
1 32 4
5 76
Dimensions
OptionsExample of the model with options 2, 3 and 5 (see below)
Type of cable Anchoring
Top fixing and cable exits
Anchoring without flangeFixing via insertion of central conical support fixed to floor.
Anchoring with flangeFixing via a flange with holes
as shown in the picture.
0,8m cable with connector, with 8m extension.
Simple 3m cable.
Fixing via locking of the metal tube. The cable leads out of the middle of the tube.
Fixing via direct locking of the column body. Axial cable exit.
Fixing vie central screw M10x12. Off-centre cable exit.
02PN8 HI-PE/CF-AS-140
HI-PE/CF-AS-140UW 640 ... 740 (25...29”)PL 40 (1.5”)
130 (5.1”)250 (9.9”)280 (11”)
Model
CEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), their accessories and optionals, to the prices and conditions of sale.
40 (1.5”)130 (5.1”)250 (9.9”)280 (11”)
PL
11 (0.4”) max
35 (1.4”) 32 (1.25”)
168
(6.6
”)
8000
(26
ft)80
0 (3
1.5”
)
11 (0.4”) max
3000
(10
ft)
ø144 (5.7”)
ø22 (0.87”)
ø20 (0.8”)
11 (
0.4”
)
25 (1”)
30 (
1.2”
)P
L 3 (0
.12”
)
27 (1.1”)
15 (
0.6”
)M
10
3 (0
.12”
)
60°
ø9 (0.35”)
105
(4.1
”)
ø188 (7.4”)
20.5
(0.
8”)
ø147 (5.8”)
ø210 (8.3”)
15.5
(0.
6”)
1970
(77
.6”)
UW
ø25 (1”)
ø140 (5.5”)
PL
Rmin 40 (1.5”)
15 (
0.6”
)
15 (
0.6”
)
ø144 (5.7”)
ø144 (5.7”)
Dimensions in mm (inches)
FC 007 US 60K23 v1_01
- 8 -
217 (8.5”)
145 (5.7”)
360 (14.2”)
320 (12.6”)
210 (8.3”)
85 (3.4”)
TW
UW22
55 (8
8.8”
)
2040
(80.
3”)
150
(5.9
”)
40 (1.6”)
20 (0
.8”)
UW +145 (5.7”)
ø8.5 (0.33”)
200 (7.9”)UW+345 (13.6”)80
(3.2
”)
Dimensions
02PN8 HI-PE/CF Elliptic
HI-PE/CF-ENUW 720 / 820 (28.3”/32.3”)
TW UW + 320 (12.6”)
Model
217 (8.5”)
145 (5.7”)
360 (14.2”)
320 (12.6”)
210 (8.3”)
85 (3.4”)
TW
UW
2255
(88.
8”)
2040
(80.
3”)
150
(5.9
”)
40 (1.6”)
20 (0
.8”)
UW +145 (5.7”)
ø8.5 (0.33”)
200 (7.9”)UW+345 (13.6”)80
(3.2
”)
Dimensions
02PN8 HI-PE/CF Elliptic Waterproof
HI-PE/CF-EWModelUW 720 / 820 (28.3”/32.3”)
TW UW + 360 (14.2”)
CEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), their accessories and optionals, to the prices and conditions of sale.
Dimensions in mm (inches)
Dimensions in mm (inches)
Top Related