GUJARAT WATER SUPPLY & SEWERAGE BOARD
Govt. PSUs as Approved Vendors of GWSSB for Civil Materials
All the products (related to water supply & Sewerage schemes) manufactured by Government PSUs shall be accepted as Approved Vendors.
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
PE‐ 80 up to 315 mm up to PN ‐10
PE‐100 up to 315 mm up to PN ‐10
90 to 315 mm PN ‐ 2.550 to 315 mm PN ‐ 440 to 315 mm PN ‐ 632 to 315 mm PN ‐825 to 315 mm PN ‐1050 to 315 mm PN ‐ 640 to 315 mm PN ‐832 to 315 mm PN ‐1090 to 315 mm & 355 to 1000 mm
PN ‐ 2.5
50 to 315 mm & 355 to 1000 mm
PN ‐ 4
40 to 315 mm & 355 to 1000 mm
PN ‐ 6
32 to 110 mm & 125 to 180 mm & 200 to 710 mm
PN ‐8
32 to 110 mm & 125 to 315 mm & 355 to 630 mm
PN ‐10
25 to 110 mm & 200 to 315 mm
PN ‐12.5
20 to 110 mm PN ‐ 1650 to 315 mm & 355 to 1000 mm
PN ‐ 6
40 to 180 mm & 200 to 900 mm
PN ‐8
32 to 315 mm & 355 to 800 mm
PN ‐10
25 to 110 mm & 200 to 315 mm
PN ‐12.5
20 to 110 mm PN ‐ 16
90 to 1000 mm PN ‐ 2.550 to 1000 mm PN ‐ 432 to 1000 mm PN ‐ 632 to 180 mm PN ‐820 to 450 mm PN ‐1020 to 180 mm PN ‐12.550 to 1000 mm PN ‐ 640 to 315 mm PN ‐832 to 500 mm &
800 mmPN ‐10
20 to 180 mm & 200 to 500 mm
PN ‐ 16
1M/s. Aerochem Piping Pvt. Ltd., Ahmedabad
Plot No. 258, Road No. 1/B, Phase‐I, Kathwada, GIDC, Ahmedabad‐382430
[email protected]@parthvalves.com
31‐1‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE‐80 & 100) Pipes (IS‐4984) with ISI mark as per
Vendor Selection Report submitted by Different TPI (As on Date:‐ 12‐2‐2016)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
PE‐100
3M/s. Purma Plast Pvt.
Ltd., Bhiwadi
B‐494, RICCO Industrial Area, Bhiwadi, Dist. Alwar, Rajasthan‐[email protected]
PE‐80
31‐1‐2017
PE‐100
2M/s. Jet Fibre Pump & equipments pvt. Ltd.,
Ahmedabad
Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm, (Bhudarpura) Mahij,
Kheda‐387 [email protected],[email protected]
PE‐80
31‐1‐2017
4
M/s. Emtelle India Limited, Sanand
(Formerly known as M/s. Parixit Industries LTd.,
Sanand)
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,
Ahmedabad ‐ 382 [email protected]@emtelle.com
PE‐80
31‐01‐2017
Name changed vide letter no. 28
dtd.12‐2‐2016
PE‐100
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 315 mm PN ‐ 2.550 to 315 mm PN ‐ 440 to 315 mm PN ‐ 632 to 250 mm PN ‐825 to 250 mm PN ‐1020 to 180 mm PN ‐12.520 to 180 mm PN ‐ 1650 to 315 mm PN ‐ 640 to 250 mm PN ‐832 to 250 mm PN ‐1025 to 180 mm PN ‐12.520 to 180 mm PN ‐ 16
PE‐80 20 to 400 mmPN ‐ 2.5 to PN
16
PE‐100 20 to 400 mmPN ‐ 6 to PN 16
90 to 1000 mm PN ‐ 2.550 to 1000 mm PN ‐ 440 to 1000 mm PN ‐ 632 to 630 mm PN ‐825 to 630 mm PN ‐1020 to 500 mm PN ‐12.520 to 400 mm PN ‐ 1650 to 1000 mm PN ‐ 640 to 800 mm PN ‐832 to 800 mm PN ‐1025 to 500 mm PN ‐12.520 to 500 mm PN ‐ 1690 to 630 mm PN ‐ 2.550 to 630 mm PN ‐ 440 to 630 mm PN ‐ 632 to 500 mm PN ‐825 to 500 mm PN ‐1020 to 315 mm PN ‐12.550 to 630 mm PN ‐ 640 to 630 mm PN ‐832 to 500 mm PN ‐1025 to 315 mm PN ‐12.520 to 315 mm PN ‐ 1690 to 110 mm PN ‐ 2.550 to 110 mm PN ‐ 440 to 110 mm PN ‐ 632 to 110 mm PN ‐825 to 110 mm PN ‐1050 to 180 mm PN ‐ 640 to 180 mm PN ‐832 to 180 mm PN ‐1025 to 110 mm PN ‐12.590 to 630 mm PN ‐ 2.550 to 630 mm PN ‐ 440 to 630 mm PN ‐ 632 to 630 mm PN ‐825 to 630 mm PN ‐1020 to 180 mm PN ‐12.520 to 180 mm PN ‐ 1650 to 630 mm PN ‐ 640 to 630 mm PN ‐832 to 630 mm PN ‐1025 to 180 mm PN ‐12.520 to 180 mm PN ‐ 16
6M/s. Reliance Industries
Ltd., Hazira
Reliance Industries Ltd, Relpipe Plant, Village‐Mora, Post‐Bhatha, Hazira,
Surat‐[email protected]
31‐1‐2017
PE‐100
5M/s. Polysil Irrigation Systems Pvt. Ltd.,
Silvassa
Survey No. 137/1, Madhuban Road, Village:‐ Karad, Silvassa‐396 230,
D & [email protected]@turfropes.com
PE‐80
31‐1‐2017
9M/s Krishna Plastics,
Rajkot
Plot no. G‐926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,
PE‐80
31‐1‐2017
PE‐100
PE‐100
8M/S Sangir Plastics .Pvt.
Ltd., Valsad
Survey No.146,147 &148, Near Raymong Ltd., Motiwada,
Valsad‐[email protected]
PE‐80
31‐1‐2017
PE‐100
7M/s Time technoplast
Ltd. Silvasa
Survey No. 326/1/1 (Part) & 328, Unit‐2, Dhodharoada, Village‐Velugam,
Silavassa‐ U.T. of D & N. H. ‐396230
PE‐80
31‐1‐2017
10M/s kelvin Plastics Private Ltd.,Rajkot
Survey no. 108/P, Near Toll Plaza, Rajkot‐Gondal National Highway‐27
(Old‐8B), Bhunava, Gondal, Rajkot‐360311
[email protected]:[email protected]
PE‐80
31‐1‐2017
PE‐100
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 1000 mm PN ‐ 2.550 to 1000 mm PN ‐ 440 to 1000 mm PN ‐ 632 to 710 mm PN ‐825 to 630 mm PN ‐1020 to 500 mm PN ‐12.520 to 400 mm PN ‐ 1650 to 1000 mm PN ‐ 640 to 900 mm PN ‐832 to 800 mm PN ‐1025 to 630 mm PN ‐12.520 to 500 mm PN ‐ 16
PE‐ 80 40 to 140 mm PN ‐ 6PE‐100 50 to 180 mm PN ‐ 6PE‐100 32 to 160 mm PN ‐10
90 to 315 mm (Except 125 mm)
PN ‐ 2.5
50 to 315 mm (Except 125 mm)
PN ‐ 4
40 to 315 mm (Except 125 mm)
PN ‐ 6
32 to 315 mm (Except 125 mm)
PN ‐8
25 to 315 mm (Except 125 mm)
PN ‐10
50 to 315 mm (Except 125 mm)
PN ‐ 6
40 to 315 mm (Except 125 mm)
PN ‐8
32 to 315 mm (Except 125 mm)
PN ‐10
200 to 630 mm PN ‐ 2.550 to 630 mm PN ‐ 440 to 630 mm PN ‐ 632 to 630 mm PN ‐832 to 630 mm PN ‐1032 to 355 mm PN ‐12.532 to 355 mm PN ‐ 1650 to 630 mm PN ‐ 640 to 630 mm PN ‐832 to 630 mm PN ‐1032 to 355 mm PN ‐12.532 to 355 mm PN ‐ 1690 to 250 mm PN ‐ 2.550 to 250 mm PN ‐ 440 to 250 mm PN ‐ 632 to 250 mm PN ‐825 to 250 mm PN ‐1020 to 180 mm PN ‐12.5110 to 180 mm PN ‐ 1650 to 250 mm PN ‐ 640 to 250 mm PN ‐832 to 250 mm PN ‐1025 to 250 mm PN ‐12.5110 to 180 mm PN ‐ 16
12M/s. Mayfair Polymers Pvt. Ltd., Himmatnagar
Mayfair Compound, N.H.No.8, Himmatnagar ‐ 383 [email protected]
31‐12‐2017 ‐
PE‐100
11M/s. jain Irrigation
Systems Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon‐425001,
PE‐80
31‐1‐2017
‐
PE‐100
14M/s. Nimabus Pipes Ltd.,
Jaipur
SP2‐123/123A, RIICO Industrial Area, Manda Near Kaladera, Chomu, Jaipur‐
302023, [email protected]
PE‐80
31‐12‐2017 ‐
PE‐100
13M/s. Kothari Agritech Pvt. Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co‐op estate, Mohol, Solapur‐
413 213, [email protected]@kotharipipes.co.in
PE‐80
31‐12‐2017
‐
PE‐100
15M/s. Kishan Moulding
Ltd., Silavasa
108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,
Silvassa‐[email protected]
[email protected]@kisangroup.com
PE‐80
31‐12‐2017
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 630 mm PN ‐ 2.550 to 630 mm PN ‐ 440 to 500 mm PN ‐ 640 to 315 mm PN ‐825 to 315 mm PN ‐1025 to 200 mm PN ‐12.550 to 630 mm PN ‐ 640 to 315 mm PN ‐832 to 630 mm PN ‐1025 to 200 mm PN ‐12.5125 to 200 mm PN ‐ 2.5125 to 200 mm PN ‐ 440 to 200 mm PN ‐ 632 to 200 mm PN ‐825 to 200 mm PN ‐1020 to 200 mm PN ‐12.520 to 200 mm PN ‐ 1650 to 200 mm PN ‐ 640 to 200 mm PN ‐832 to 200 mm PN ‐1025 to 200 mm PN ‐12.520 to 200 mm PN ‐ 1690 to 140 mm & 160 to 400 mm
PN ‐ 2.5
50 to 140 mm & 160 to 400 mm
PN ‐ 4
40 to 400 mm PN ‐ 632 to 400 mm PN ‐825 to 400 mm PN ‐1020 to 200 mm PN ‐12.520 to 200 mm PN ‐ 1650 to 400 mm PN ‐ 640 to 400 mm PN ‐832 to 400 mm PN ‐1025 to 200 mm PN ‐12.520 to 200 mm PN ‐ 1690 to 250 mm PN ‐ 2.550 to 250 mm PN ‐ 440 to 250 mm PN ‐ 632 to 250 mm PN ‐825 to 250 mm PN ‐1050 to 250 mm PN ‐ 640 to 250 mm PN ‐832 to 250 mm PN ‐1040 to 200 mm PN ‐ 632 to 110 mm PN ‐832 to 110 mm PN ‐1032 to 90 mm PN ‐12.550 to 90 mm PN ‐ 1650 to 200 mm PN ‐ 640 to 110 mm PN ‐832 to 110 mm PN ‐1032 to 90 mm PN ‐12.550 to 90 mm PN ‐ 16
16M/s. Dutron Polymers
Ltd., Kheda
Bolck No. 642, N.H. 8, At‐Hariyala, Kheda
PE‐80
31‐12‐2017 ‐
PE‐100
‐
PE‐100
18M/s. Kisan Irrigation & Infrastructure ltd.,
Mumbai
Unit ‐2 , Plot No. 91‐110, Sector ‐3, Pithampur, Dist‐ Dhar (MP)‐454 775
[email protected]_ [email protected]
PE‐ 80
31‐12‐2017 ‐
PE‐100
17M/s. Dolphin Poly Plast
pvt. Ltd., Rajkot
Plot No. G/1/C, Near Gate no. 2, Ta:‐ Lodhika, GIDC Metoda, Rajkot‐360021
[email protected]@dolphinpipe.com
PE‐ 80
31‐12‐2017
‐
PE‐100
19M/s. Meghdoot Polypipes, Jaipur
G‐1‐198, Road No. 10, Bindayaka Industrial Area, Phase‐II, Jaipur‐
PE‐ 80
31‐12‐2017
20M/s. Nataraj Polyplast
Pvt. Ltd., Rajkot
Survey no‐168, Plot no. ‐23, Near Railway Over Bridge, Dhebar Road (South), Kothariya , Rajkot‐360002
PE‐80
31‐12‐2017 ‐
PE‐100
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
500, 630 & 710 mm
PN ‐ 2.5
50 to 110 mm, 355 to 400 mm, 500, 630 & 710
mm
PN ‐ 4
40 to 400 mm, 450, 500, 630 &
710 mm PN ‐ 6
32 to 110 mm, 355 to 400 mm, 450, 500, & 630
mm
PN ‐8
25, 32 to 200 mm (Except 125 mm), 450, 500, & 630
mm
PN ‐10
20 to 180 mm PN ‐12.550 to 500 mm & 630, 710 mm
PN ‐ 6
40 to 500 mm & 630, 710 mm
PN ‐8
32 to 500 mm & 630, 710 mm
PN ‐10
25 to 400 mm PN ‐12.590 to 450 mm PN ‐ 2.550 to 450 mm PN ‐ 440 to 450 mm PN ‐ 632 to 450 mm PN ‐825 to 450 mm PN ‐1020 to 450 mm PN ‐12.520 to 400 mm PN ‐ 1650 to 450 mm PN ‐ 640 to 450 mm PN ‐832 to 450 mm PN ‐1025 to 450 mm PN ‐12.520 to 450 mm PN ‐ 1690 to 630 mm PN ‐ 2.550 to 630 mm PN ‐ 440 to 630 mm PN ‐ 632 to 500 mm PN ‐825 to 500 mm PN ‐1020 to 400 mm PN ‐12.520 to 315 mm PN ‐ 1650 to 630 mm PN ‐ 640 to 500 mm PN ‐832 to 500 mm PN ‐1025 to 400 mm PN ‐12.520 to 315 mm PN ‐ 1690 to 110 mm PN ‐ 2.550 to 110 mm PN ‐ 440 to 110 mm PN ‐ 632 to 110 mm PN ‐825 to 110 mm PN ‐1020 to 110 mm PN ‐12.520 to 110 mm PN ‐ 1650 to 110 mm PN ‐ 640 to 110 mm PN ‐832 to 110 mm PN ‐1025 to 110 mm PN ‐12.520 to 110 mm PN ‐ 16
21M/s. Kriti Industries (India) Ltd., Indore
13/1, Tarapura, Plot no. 75‐86, Sector‐2, Pithampur, Dist. Dhar, [email protected]
PE‐ 80
31‐12‐2017 ‐
PE‐100
‐
PE ‐100
22M/s. Rungta Irrigation
Ltd., Ghaziabad
C‐165, Bulandshahar Road, Industrial Area, Ghaziabad (U.P.)
[email protected]@rungtairrigation.in
PE‐80
31‐12‐2017
‐
PE‐100
24M/s. Sagar Polytechnik
Ltd., Chotila (Surendranagar)
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,
PE‐80
31‐12‐2017 ‐
PE‐100
23M/s. Noble Polymers,
Silvassa
Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :‐ Athal,
Silvassa‐396230, UT of Dadra & Nagar Haveli.
PE‐80
31‐12‐2017
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
40 to 315 mm PN ‐ 6125 to 315 mm PN ‐825 to 180 mm PN ‐1020 to 110 mm PN ‐12.520 to 110 mm PN ‐ 1650 to 315 mm PN ‐ 640 to 315 mm PN ‐832 to 315 mm PN ‐1090 to 180 mm PN ‐ 2.550 to 180 mm PN ‐ 440 to 180 mm PN ‐ 632 to 180 mm PN ‐832 to 180 mm PN ‐1050 to 180 mm PN ‐ 640 to 180 mm PN ‐832 to 180 mm PN ‐1090 to 110 mm PN ‐ 2.550 to 110 mm PN ‐ 440 to 110 mm PN ‐ 632 to 110 mm PN ‐825 to 110 mm PN ‐1050 to 110 mm PN ‐ 640 to 110 mm PN ‐832 to 110 mm PN ‐1063 to 110 mm PN ‐ 2.563 to 110 mm PN ‐ 463 to 125 mm PN ‐ 6
125 mm PN ‐8125 mm PN ‐10
20 to 125 mm PN ‐12.520 to 125 mm PN ‐ 1663 to 125 mm PN ‐ 6
125 mm PN ‐8125 mm PN ‐10
20 to 125 mm PN ‐12.520 to 125 mm PN ‐ 16
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
25M/s. Elegant Polymers,
Rajkot
Elegant Polymers, At‐Navagam (Bamanbore), Taluka:‐ Chotila,
PE‐ 80
31‐12‐2018 ‐
PE‐100
26M/s. Signet Industries
Ltd., Dhar (MP)
Plot no. 462‐465 & 476‐478, Sector‐3, Industrial Area, Pithampur, Dhar,
Madhya [email protected]
PE‐80
28M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad
Block No. 792, Nr. Monik Ind. Sadaspur Road, Village:‐ Moti Bhoyan,
Kalol, [email protected]@vishakhairrigation.com
PE‐80
31‐12‐2018 ‐
PE‐100
31‐12‐2018 ‐
PE‐100
27M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar
Survey no.‐589, 590/2, Harsol‐Ahmedabad Road, At & PO‐ Harsol,
Talod, [email protected]
PE‐80
31‐12‐2018 ‐
PE‐100
Size (mm) Class1 2 3 4 5 6 7
63 to 315 mm Class II‐ 4.0 kg/cm263 to 315 mm Class III‐ 6.0 kg/cm263 to 110 mm Class IV‐ 8.0 kg/cm263 to 315 mm Class V‐ 10.0 kg/cm2
63 to 315 mm Class III‐ 6.0 kg/cm2
90 to 315 mm Class V‐ 10.0 kg/cm2
3M/s. Duke Plasto Tech.Pvt.
Ltd., Palanpur
N.H. 27, Deesa Highway, Badarpura, Palanpur‐385511, North Gujarat
63 to 250 mm ( except 125 &
225 mm)Class III‐ 6.0 kg/cm2 31‐1‐2017
63 to 110 mm Class II‐ 4.0 kg/cm263 to 250 mm Class III‐ 6.0 kg/cm263 to 250 mm Class IV‐ 8.0 kg/cm263 to 250 mm Class V‐ 10.0 kg/cm2
5
M/s. Emtelle India Limited, Sanand (Formerly known as M/s. Parixit Industries LTd.,
Sanand)
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand, Ahmedabad ‐ 382 170
[email protected]@emtelle.com
63 to 315 mm Class III‐ 6.0 kg/cm2 31‐1‐2017
Name changed vide letter no. 28
dtd.12‐2‐2016
63 to 315 mm Class II‐ 4.0 kg/cm240 to 315 mm Class III‐ 6.0 kg/cm225 to 315 mm Class IV‐ 8.0 kg/cm2
63 to 315 mm Class V‐ 10.0 kg/cm2
63 to 200 mm Class II‐ 4.0 kg/cm2
40 to 200 mm Class III‐ 6.0 kg/cm2
8M/s kelvin Plastics Private
Ltd.,Rajkot
Survey no. 108/P, Near Toll Plaza, Rajkot‐Gondal National Highway‐27 (Old‐8B),
Bhunava, Gondal, Rajkot‐[email protected]:
63 to 250 mm Class III‐ 6.0 kg/cm2 31‐1‐2017
9M/s. jain Irrigation Systems
Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon‐425001, Maharastra
[email protected]@jains.com
63 to 630 mm Class II to VI
( 4.0 to 12.5 kg/cm2)31‐1‐2017
90 to 250 mm (Except 125 mm)
Class II‐ 4.0 kg/cm2
63 to 315 mm (Except 280 mm)
Class III‐ 6.0 kg/cm2
90 to 250 mm (Except 125 mm)
Class V‐ 10.0 kg/cm2
63 to 315 mm Class II‐ 4.0 kg/cm240 to 315 mm Class III‐ 6.0 kg/cm263 to 315 mm Class IV‐ 8.0 kg/cm2
32 to 315 mm Class V‐ 10.0 kg/cm2
11M/s. Kishan Moulding Ltd.,
Silavasa
108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli, Silvassa‐396230
[email protected]@[email protected]
31‐12‐2017 ‐
10M/s. Mayfair Polymers Pvt.
Ltd., Himmatnagar
Mayfair Compound, N.H.No.8, Himmatnagar ‐ 383 001
[email protected]@gmai.com
31‐12‐2017 ‐
7 M/s Sumo Polyplast Pvt.Ltd.Plot no. G‐925, GIDC Lodhika, Kishan Gate,
Kalawad Road, At. Metoda, [email protected]
31‐1‐2017
4M/s. Super Industrial Corp.,
PatialaC‐67, Focal Point, Patiala‐147004
[email protected]‐1‐2017
6 M/s. Polysil Pipes, SilvassaSurvey No. 103/1/2, Rakholi Industrial Estate,
Village‐Rakholi, Silvassa, D & [email protected]
31‐1‐2017
1The supreme Industries Ltd.,
At: Gadegaon, PO: Neri. Dist: [email protected]
31‐1‐2017
M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad
2
Vishakha Irr. Pvt., Ltd,Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti
Bhoyan, Tal. Kalol, Dist. [email protected]
31‐1‐2017
M/s. The Supreme Industries Ltd., Jalgaon
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS‐4985) with ISI mark as per Vendor Selection
Report submitted by Different TPI (As on Date:‐12‐2‐2016)Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Remarks
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Remarks
12M/s. Dutron Polymers Ltd.,
KhedaBolck No. 642, N.H. 8, At‐Hariyala, Kheda
[email protected] to 315 mm Class III‐ 6.0 kg/cm2 31‐12‐2017 ‐
90 to 315 mm (Except 125 mm)
Class I‐ 2.5 kg/cm2
63 to 315 mm Class II‐ 4.0 kg/cm240 to 315 mm Class III‐ 6.0 kg/cm2
25 to 315 mm (Except 125 mm)
Class IV‐ 8.0 kg/cm2
20 to 315 mm (Except 125 mm)
Class V‐ 10.0 kg/cm2
63 to 315 mm Class II‐ 4.0 kg/cm240 to 315 mm Class III‐ 6.0 kg/cm225 to 315 mm Class IV‐ 8.0 kg/cm220 to 315 mm Class V‐ 10.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class II‐ 4.0 kg/cm2
40 to 315 mm Class III‐ 6.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class IV‐ 8.0 kg/cm2
63 to 315 mm Class V‐ 10.0 kg/cm2140 to 315 mm Class VI‐ 12.5 kg/cm2
16M/s. AKG Extrusion Pvt. Ltd.,
NoidaB‐39, Sector‐80, Noida, Uttar Pradesh‐201305
[email protected] to 315 mm Class III‐ 6.0 kg/cm2 31‐12‐2017 ‐
63 to 400 mm Class II‐ 4.0 kg/cm2
40 to 400 mm Class III‐ 6.0 kg/cm2
18M/s. Sagar Polytechnik Ltd., Chotila (Surendranagar)
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila, [email protected]
63 to 200 mm Class III‐ 6.0 kg/cm2 31‐12‐2017 ‐
19M/s. Stuti Pipes Pvt. Ltd.,
Sabarkantha
Block no. 433, Tajpur Oran road, Village:‐ Prantij, Taluka:‐ Prantij, Dist.:‐ Sabarkantha‐
63 to 200 mm (Except 125 mm)
Class III‐ 6.0 kg/cm2 31‐12‐2018 ‐
63 to 200 mm Class II‐ 4.0 kg/cm2
63 to 200 mm Class III‐ 6.0 kg/cm2
63 to 200 mm Class IV‐ 8.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class II‐ 4.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class III‐ 6.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class V‐ 10.0 kg/cm2
17M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha‐383215
[email protected]‐12‐2017 ‐
15M/s. Kriti Industries (India)
Ltd., Indore
13/1, Tarapura, Plot no. 75‐86, Sector‐2, Pithampur, Dist. Dhar, [email protected]
31‐12‐2017 ‐
14M/s. Kisan Irrigation &
Infrastructure ltd., Mumbai
Unit ‐2 , Plot No. 91‐110, Sector ‐3, Pithampur, Dist‐ Dhar (MP)‐454 [email protected]_ [email protected]
31‐12‐2017 ‐
13M/s. Kothari Agritech Pvt.
Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co‐op estate, Mohol, Solapur‐413 213,
[email protected]@kotharipipes.co.in
31‐12‐2017 ‐
20M/s. Signet Industries Ltd.,
Dhar (MP)
Plot no. 462‐465 & 476‐478, Sector‐3, Industrial Area, Pithampur, Dhar, Madhya
31‐12‐2018 ‐
21M/s. Vinayak Polypipes Pvt.
Ltd., Himmatnagar
Survey no.‐589, 590/2, Harsol‐Ahmedabad Road, At & PO‐ Harsol, Talod, Sabarkantha
[email protected]‐12‐2018 ‐
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Remarks
22M/s. Swastik Krushi Polypipes Pvt. LTD.,
Dahegam
Plot No. 314, Zak Industrial Area, Vahelal Road, Village‐ Zak, Post‐ Paradhol, Dahegam,
Gandhingar‐[email protected]@swastikkrushi.com
63 to 160 mm (Except 125 mm)
Class III‐ 6.0 kg/cm2 31‐12‐2018 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) (NM) Class
1 2 3 4 5 6 7100, 125, 150, 175, 200, 250 & 300 mm
RMS
250 & 300 mm PMS150, 175, 200, 250 &
300 mm CS
40, 50, 80, 100, 115, 125, 150, 175, 200,
250, 300 mm CM
125, 175, 200 & 250 mm
CD
40 to 200 mm RMS40 to 200 mm CM150 to 200 mm CS200 to 400 mm CD
40 to 250 mm CM
150 to 250 mm CS
150 to 400 mm CS 40 to 400 mm CM40 to 400 mm RMS250 to 400 mm PMS115 to 400 mm CD115 to 175 mm RDS
125, 175, 200, 250 mm
CM
175, 200, 250 mm CS
40 to 250 mm CM
150 to 250 mm CS
100 to 150 mm , 175 mm & 200 mm
CM
150 mm, 175 mm & 200 mm
CS
125 mm, 150 mm & 200 mm
RS
100, 125, 150, 175, 200 & 250 mm
CM
150 , 175, 200 & 250 mm
CS
8M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha‐
31‐12‐2017 ‐
7M/s. Kriti Industries (India) Ltd., Indore
13/1, Tarapura, Plot no. 75‐86, Sector‐2, Pithampur, Dist. Dhar, [email protected]
31‐12‐2017 ‐
6M/s. Kisan Irrigation & Infrastructure ltd.,
Mumbai
Unit ‐2 , Plot No. 91‐110, Sector ‐3, Pithampur, Dist‐ Dhar (MP)‐454 775
[email protected]_ [email protected]
31‐12‐2017 ‐
5M/s. Dutron Polymers
Ltd., Kheda
Bolck No. 642, N.H. 8, At‐Hariyala, Kheda
[email protected]‐12‐2017 ‐
4M/s. jain Irrigation
Systems Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon‐425001,
31‐1‐2017
1M/s. Duke Plasto
Tech.Pvt. Ltd., Palanpur
N.H. 27, Deesa Highway, Badarpura, Palanpur‐385511, North Gujarat
[email protected]‐1‐2017
2M/s. Super Industrial
Corp., PatialaC‐67, Focal Point, Patiala‐147004
[email protected]‐1‐2017
3M/s. Polysil Pipes,
Silvassa
Survey No. 103/1/2, Rakholi Industrial Estate, Village‐Rakholi, Silvassa, D &
31‐1‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS‐12818) with ISI
mark as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail Address
Approved Size & Class Approval Valid up to
Date Remarks
Size (mm) (NM) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E‐mail Address
Approved Size & Class Approval Valid up to
Date Remarks
125, 150, 175, 200 mm
CM
150, 175, 200, 250 mm
CS
100, 115, 125, 150, 175, 200, 250 mm
CM
150, 175, 200, 250 mm
CS
9M/s. Stuti Pipes Pvt. Ltd.,
Sabarkantha
Block no. 433, Tajpur Oran road, Village:‐ Prantij, Taluka:‐ Prantij, Dist.:‐ Sabarkantha‐[email protected]
31‐12‐2018 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
10M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar
Survey no.‐589, 590/2, Harsol‐Ahmedabad Road, At & PO‐ Harsol,
Talod, [email protected]
31‐12‐2018 ‐
1 2 3 4 5 6
1M/s. Samshi Pipe
Industries Ltd., Vadodara
Plot No. E‐9, Savli GIDC Estate, Manjusar, Savli, Vadodara‐391165
hitesh [email protected]
MS Helical Seam Submerge Arc Welded Pipe :‐Size range 18' (457 mm) to 100" (2540 mm) and thickness 5 mm to 20 mm in length 6 mtr to 12 mtr.
31‐1‐2017
2M/s. Bhushan Steel Ltd.,
Raigadh
Nigan‐savroli, Isamba Phata khopoli, Tal;‐ Khalapur, Dist:‐ Raigad, Maharastra‐
ERW Pipes of range:‐ Dia‐ 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.
31‐1‐2017
3M/s. Ratnamani Metals &
Tubes Ltd., Chhatral
Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV, Ahmedabad‐Mehasana
Highway, Chhatral, kadi, Mehasana‐382729
OD:‐ 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:‐ 5 mm to 28 mm
31‐1‐2017
4M/s. Ratnamani Metals &
Tubes Ltd., Kutch
Survey No. 474, Bhimasar road, Vill. Bhimasar, Tal. Anjar, Dist. Kutch ‐370201
OD:‐ 457 mm to 2540 mm (18" to 100" )Wall thickness:‐ 5 mm to 20 mm
31‐1‐2017
5M/s. Jindal Saw Limited,
Kutch
Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar‐Mandvi Road,
Tal: Mundra, Dist: Kutch‐370415
[email protected]@jindalsaw.com
OD:‐ 457.2 mm to 2540 mm (18" to 100" )Wall thickness:‐ 6 mm to 25 mm
31‐1‐2017
6M/s. Asian Mills Pvt. Ltd.,
Ahmedabad
Asian Mills PVt. Ltd., Plot NO. 1, Phase‐1, GIDC Chhatral, Kalol, Mehsana
(1) IS: 1239 (Part‐1)2004:‐ 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589‐2001:‐ 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270‐2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410
31‐1‐2017
7M/s. Welspun corp ltd.,
Dahej (Bharuch)
Unit‐I (Dahej Plant), Welspun Corp. Ltd., Village: Jolva & vadadla, Tal: Vagra, Dahej
Road, Bharuch, Gujarat‐392 130
(1) M.S. Pipe from size :‐457 mm to 1930 mm & thickness 5 mm to 14 mm(2) 3LPE/LPP coating for pipe size:‐ 4 inch to 64 inch OD(3) External coating FBE/CFBE for pipe size:‐ 4 inch to 64 inch OD(4) Internal liquid Epoxy for pipe size:‐ 20 inch to 64 inch ID
31‐1‐2017
8 M/s. PSL Ltd., Anjar
Village varsana, Survey no. 39,40,42, Bhachau ‐ Bhimasha road/ Nr.
Gandhidham Varsana, taluka‐ Anjar, Kutch‐370240
(1) Helical Seam Submerged Arc Welded Pipes:‐ ( IS 3589; Grade 330 & 410 IS 5504);‐(a) Outside Dia. Range:‐ 168.3 mm to 2540 mm OD(b) Thickness Range:‐ 5 mm to 25 mm(2) 3LPE, 3LPP, CWC, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, ICP, DFBE, Coating on Pipes:‐(a) Outside Dia. Range:‐ 168.3 mm to 2540 mm OD(b) Thickness Range:‐ 2 mm to 50 mm
31‐1‐2017
Approved Size & Thickness
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark as per Vendor
Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproval Valid up to
DateRemarks
1 2 3 4 5 6
Approved Size & Thickness Sr. No.
Name of Agency Adress/E‐mail AddressApproval Valid up to
DateRemarks
9M/s. Welspun Corp Ltd, Anjar
Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar,
Kutch‐370110(1) [email protected]
(2) Sanjay_raghavan @ welspun.com
(1) Helical Seam Submerged Arc Welded Pipes:‐ (a) Outside Dia. Range:‐ 168.1 mm to 3556 mm OD(b) Thickness Range:‐ 4 mm to 25 mm(2) 3LPE, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, DFBE, Coating on Pipes:‐(a) Outside Dia. Range:‐ 168.1 mm to 3556 mm OD(b) Thickness Range:‐ 0.1 mm to 50 mm
31‐1‐2017
10M/s. Essar Steel India Ltd.,
Hazira
Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira road, Surat, Gujarat‐
406 mm to 2540 mm in thickness 6 to 25.4 mm WT. 31‐12‐2017 ‐
11Surya Global Steel Tubes
ltd., Kutch
Survey No.188, Anjar‐Mundra highway, Village:‐Bhuvad, Kutch‐[email protected][email protected]@gmail.com
(A) MS ERW pipe:‐ 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:‐ From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410
31‐12‐2017 ‐
12 M/s. SAIL Bokaro Steel City, Bokaro, Jharkhand
M.S. pipe of IS 3589:‐2001 (ISI mark) 406 mm to 1626mm in thickness 6 to 25.4 mm WT.
31‐12‐2017Recommended by TCEL
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1 2 3 4 5 6
1M/s. Welspun Corp Ltd, Anjar
Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar, Kutch‐370110(1) [email protected](2) Sanjay_raghavan @ welspun.com
(1) Hot Rolled Plates:‐ 8 mm to 140 mm thickness in all national & international Grades.(2) Hot Rolled Coils:‐ 6 mm to 25 mm thickness in all national & international Grades
31‐1‐2017
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Mild Steel Hot Rolled Plates & Coils as per Vendor Selection
Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail Address Approved Size & Thickness Approval Valid up to
dateRemarks
Size (mm) Class
1 2 3 4 5 6 7
1M/s. Jai Balaji Industries,
Burdwan (W.B)
Unit‐3, Vill. Banskopa, P.O. Rajbandh, Dist. Bardwan, West Bengal‐[email protected]
80 to 1200 mm (Except 125 & 750
mm)K‐7 & K‐9 31‐1‐2017
2M/s. Jindal Saw Limited,
Kutch
Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar‐Mandvi Road, Tal: Mundra, Dist: Kutch‐[email protected]@jindalsaw.com
80 to 1000 mm K‐7 & K‐9 31‐1‐2017
3
M/s. Srikalahasthi Pipes Ltd., A.P. ( Formerly known as M/s. Lanco Industries Ltd., AP)
Rachagunneri‐517641, Srikalahasthi Mandal, Chittor District, [email protected]@srikalahasthipipes.com
100 to 1100 mm ( Except 125 mm)
K‐7 & K‐9 31‐1‐2017
Name changed vide letter no. 299 dtd.17‐10‐2015
4M/s. Electrotherm (I)
Ltd., Kutch
Survey no. 325, 310 KM Stone, Nr. Tollnaka, Village:‐ Samakhiyali, Ta:‐
Bhachau, Kutch‐[email protected]@electrotherm.com
80 to 1200 mm K‐7 & K‐9 31‐12‐2017 ‐
80 to 1000 mmK‐7 , K‐8, K‐10 & K‐12
80 to 1100 mm K‐9
6M/s. Tata Metaliks Kubota Pipes Ltd., Madinapur (WB)
P.O.‐ Samraipur, Kharagpur, Dist.: Medinapur(West) ‐721301, West
Bengaljitendra.mishra@tatametalikskubota.
com
80 mm to 800 mm (Except 125 & 750
mm) K‐7 & K‐9 31‐12‐2017 ‐
7M/s. Rashmi Metaliks Ltd., Medinipore (WB)
Village:‐ Gokulpur, P.O. Shyamraipur, Dist. Paschim Medinipore, Pin‐721 304, West [email protected]@rashmigroup.com
80 to 1000 mm (Except 125 & 750
mm) K‐7 & K‐9 31‐12‐2017
Cancellation of approval vide letter dt.19‐9‐2015 is revoked by letter dt. 3‐12‐2015, till the final decision on the
matter is finalized by board
5M/s. Electrosteel Castings
Ltd., Kolakatta
30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas (North)
[email protected]@electrosteel.com
31‐12‐2017 ‐
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on Date:‐3‐12‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Size (mm) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 780 to 150 mm (Except 125 mm)
Class‐10
80 to 700 mm (Except 125 mm)
Class‐15
80 to 150 mm (Except 125 mm) & 200 to 600 mm &
700 mm
Class‐20
80 to 150 mm (Except 125 mm) & 200 to 350 mm, 400 to 600 mm & 700
mm
Class‐25
80 to 150 mm , Class ‐1080 to 700 mm, & 800mm, 900mm,
1000 mmClass ‐15
80 to 700 mm & 900mm,
Class ‐20
80 to 700 mm & 800mm
Class ‐25
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1M/s. Aprva Vinimaya Pvt.
Ltd., Ahmedabad
P.O. Digvijay nagar, Ranip, Ahmedabad‐382470
[email protected]‐12‐2017 ‐
2A Infrastructure Ltd., Bhilwara (Rajsthan)
P.O. Hamirgarh‐311025, Dist:‐ Bhilwara, [email protected]@kanoria.org
31‐12‐2017 ‐
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of A.C. Pressure Pipes (IS 1592‐2003) with ISI mark
(Mazza Process) as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Size (mm) Class Type
1 2 3 4 5 6 7 8
1M/s. Navkar Builders Ltd.,
Kheda
Village‐ Sandhana, Block C.K.no:‐ 1160 & 1161A, Taluka‐Matar, [email protected]
300, 450, 500, 600, 900, 1000, 1200 &
1400 mmNP‐3 & NP‐4
Vertical Vibrated cast
31‐12‐2017 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of RCC pipe (IS:‐ 458:1989) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Sr. No.
Name of Agency Adress/E‐mail Address Type GradeApproval Valid up to
Remarks
1 2 3 4 6 7
Ordinary Portland cement
53 grade
Portland Pozzolana cement
‐
Ordinary Portland cement
53 grade
Portland Pozzolana cement
‐
Ordinary Portland cement
53 grade
Portland Pozzolana cement
‐
Ordinary Portland cement
53 grade
Portland Pozzolana cement
‐
Ordinary Portland cement
53 grade
Portland Pozzolana cement (Fly ash
based ‐15 to 35%)‐
Ordinary Portland cement
53 grade
Ordinary Portland cement
43 GradeAs per IS 8112‐
2013With ISI mark
Portland Pozzolana cement (Fly ash
based ‐15 to 35%)‐
Ordinary Portland cement
53 grade
Portland Slag cement ‐As per IS 455:1989
With ISI mark
4 M/s. Ultratech Ultratech cement, B‐wing, 2nd floor, Ahura centre, Mahakali Caves road,
Andheri east, Mumbai‐40009331‐12‐2017
Recommended by TCEL
2 M/s. ACC Ltd. ACC ltd., Cement House, 121, Maharishi karve road, Mumbai‐
40002031‐12‐2017
3 M/s. AmbujaElegant Business park, MIDC Cross road‐B, Off Andheri‐Kurla road, Andheri East , Mumbai‐400059
31‐12‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Cement (as per IS 12269‐1987 & 1489 (part‐I)) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on Date:‐23‐9‐2015)
1M/s. Saurastra Cement
Ltd., Porbandar
Saurashtra Cement Ltd., Nr. Railway Station, Ranavav‐ 360 560, [email protected]
31‐12‐2017 ‐
5M/s. J. K. Laxmi Cement
Ltd., Kalol
Village:‐ Moti Bhoyan, Taluka:‐ Kalol, Gandhinagar‐382721
[email protected]‐12‐2018 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
6M/s. Gujarat Sidhee Cement Ltd., Veraval
Gujarat Sidhee cement ltd., opp. Veraval Kodinar Highway, Veraval,
31‐12‐2018
7M/s. Hi‐Bond Cement (India) Pvt. Ltd., Rajkot
Survey no. 315,316,317, Patidad Gomta Chowkdi, Village Patidad,
Taluka:‐ Gondal, [email protected]@[email protected]
31‐12‐2018
Approved Size & Class
Size (mm)
1 2 3 4 6 7
1M/s. Aashiana Rolling Mills Ltd., Ahmedabad
Survey No.136, Nr. Friends Ispat, Kerala GIDC, Bavla, Ahmedabad‐
Fe 415, Fe 500 & Fe 500 D
8 mm to 32 mm 31‐12‐2017 ‐
2M/s. Electrotherm (I) Ltd.,
Kutch
Survey No. 325, N.H.No. 8A, 310 KM stone, Nr. Toll Naka, Village:‐
Samakhiyali, Ta.: Bhachchau, Kutch‐370140
Fe 415, Fe 500 & Fe 550
8 mm to 36 mm 31‐12‐2017 ‐
3M/s. Vinayak TMT bars Pvt. Ltd., Dahegam
Survey No. 25/1, 25/2, 24/P, Barot na Mosampur, Bayad Road, Post. Sampa,
Dahegam‐382305, [email protected]
Fe 415 & Fe 500 8 mm to 36 mm 31‐12‐2017 ‐
4M/s. Shree Parmeshwar
Steel Pvt. Ltd., Ahmedabad
220/E, Gujarat Vepari Maha Mandal, A.V. Ltd., Odhav, [email protected]
Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,
Fe 550 D
8 mm to 32 mm 31‐12‐2017 ‐
5 M/s. TATA Steel Tata nagar, Jamshedpur, JharkhandFe 415, Fe 500 & Fe
5508 mm to 36 mm 31‐12‐2017
6 M/s. ESSARFe 415, Fe 500 & Fe
5508 mm to 36 mm 31‐12‐2017
7 M/s. SAIL Bokaro Steel City, Bokaro, JharkhandFe 415, Fe 500 & Fe
5508 mm to 36 mm 31‐12‐2017
8 M/s. JINDALFe 415, Fe 500 & Fe
5508 mm to 36 mm 31‐12‐2017
9M/s. Utkarsh Bars Pvt. Ltd., Surendranagar
Plot no. 725, Bamanbore GIDC, Bamanbore, Taluka:‐ Chotila, Dist.
[email protected]@aryagroup.co.in
Fe 415, Fe 500 8 mm to 32 mm (Except 22 mm)
31‐12‐2018 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of TMT/HSD Bars (IS 1786:2008) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail Address Material GradeApproval Valid up to
DateRemarks
Recommended by TCEL
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar‐[email protected]@kartarvalves.com
50 to 600 mmPN 1.0 &
1.6With ISI mark
31‐1‐2017
50 to 1200 mm PN 1.050 to 600 mm PN 1.650 to 1000 mm
(SGI)PN 1.0
50 to 600 mm (SGI)
PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
6M/s. Bharat Engineering Works, Dhrangadhra
Plot No. 67, Phase‐K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra‐363310, [email protected]
50 to 600 mmPN 1.0 &
1.6With ISI mark
31‐1‐2017
7M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase ‐III, APIIC, Pashamylaram, Patancheru Mandal,
Medak District‐502307saleshyderabad@vag‐group.com
50 to 600 mm (DI)
PN 1.0 & 1.6
Without ISI Mark
31‐1‐2017
8M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 1600 mm
PN 0.6 to 3.0
Without ISI mark
31‐12‐2017 ‐
9M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected] to 1200 mm
PN 1.0, 1.6, 2.0 &
2.5
Without ISI mark
31‐12‐2017
Cast steel/S.G. Iron/ DI
(Without ISI Mark)
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
M/s. Calsens Pvt. Ltd., Howrah
Unit‐I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah‐
With ISI Mark
31‐12‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS‐14846) as per Vendor Selection Report
submitted by Different TPI (As on Date:‐ 3‐12‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
2M/s. Sachdeva Metal works, Jalandhar
C‐33, Focal Point Extension, Jalandhar City‐144001
[email protected]‐1‐2017
With ISI mark
M/s. Durga valves Pvt. Ltd., Howrah
3
Ichapur road, Canal side, Santragachi, Howrah ‐ 711104
[email protected], [email protected]
31‐1‐2017With ISI mark
4M/s. Kamala valves & Engg. Pvt. Ltd., Howrah
41/2, 'Q' road, Belgachia, Howrah ‐ 711108
[email protected]@vsnl.net
31‐1‐2017With ISI mark
31‐1‐2017Balitikuri, Bakultala, via Dasnagar,
Howrah‐[email protected]
M/s. H.Sarker & Company, Howrah
5With ISI mark
‐10
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
Up to 600 mm PN 1.0 Up to 300 mm PN 1.6Up to 1200 mm PN 0.6Up to 1500 mm PN 1.0 Up to 1300 mm PN 1.6
Up to 500 mm PN 2.0
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 900 mm PN 1.0
50 to 600 mm PN 1.6
15M/s. Bikaner Engineering Works , Jaipur
F‐445, Road No. 12, V.K.I. Area, Jaipur‐302013
[email protected] to 300 mm 1.0 & 1.6
With ISI Mark
31‐12‐2017 ‐
16M/s. Shiva Industries, Jaipur
gram Niwaroo, Niwaroo Road, Jhotawara, Jaipur‐[email protected]
50 to 600 mmPN 1.0 &
1.6With ISI Mark
31‐12‐2017 ‐
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
18M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar‐
50 to 400 mm ‐With ISI mark
31‐12‐2018 ‐
19M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M‐64, Additional M.I.D.C., Satara‐415 004, Maharashtra
[email protected] to 400 mm
up to PN 1.6
Without ISI mark
31‐12‐2018
‐
17M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot‐360021
With ISI Mark
31‐12‐2017 ‐
14M/s. Upadhaya Valves Manufacturers Pvt. Ltd.,
Kolkatta
P 280 Benaras road, Howrah‐[email protected]
[email protected]@upadhayavalves.net
With ISI Mark
31‐12‐2017
D.I. (without ISI
Mark)
12M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah‐711402
[email protected]@[email protected],
With ISI Mark
31‐12‐2017
13M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah‐711105 (WB)
With ISI Mark
31‐12‐2017
‐
11M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune, Maharastra
[email protected]@kbl.co.in
With ISI Mark
31‐12‐2017
SG Iron/ Cast steel (without ISI
Mark)Without ISI
Mark
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
20M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar‐[email protected]
50 to 300 mmPN 1.0 & PN 1.6
With ISI Mark
31‐12‐2018
Pressure Rating
ammended vide letter no. 301 dt. 19‐10‐2015
21M/s. Fouress Engineering
(I) Ltd., Aurangabad
C‐2, MIDC industrial Area, Paithan, Dist. Aurangabad‐ [email protected]
Up to 750 mmUp to PN
1.6Without ISI
Mark31‐12‐2018
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar‐[email protected]@kartarvalves.com
50 to 600 mmPN 1.0 &
1.6With ISI Mark 31‐1‐2017
2M/s. Sachdeva Metal works, Jalandhar
C‐33, Focal Point Extension, Jalandhar City‐144001
[email protected] to 350 mm
PN 1.0 & 1.6
Without ISI Mark
31‐1‐2017
3M/s. Durga valves Pvt.
Ltd., Howrah
Ichhapur road, Canal side, Santragachi, Howrah ‐ 711104
[email protected], [email protected]
50 to 600 mm PN 1.0 &
1.6With ISI Mark 31‐1‐2017
4M/s. H.Sarker &
Company, Howrah
Balitikuri, Bakultala, via Dasnagar, Howrah‐711113
[email protected] to 600 mm
PN 1.0 & 1.6
With ISI Mark 31‐1‐2017
5M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase ‐III, APIIC, Pashamylaram, Patancheru Mandal, Medak District‐502307saleshyderabad@vag‐group.com
50 to 1000 mm (DI)
PN 1.0 & 1.6
Without ISI Mark
31‐1‐2017
6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 600 mm
PN 0.6 to 3.0
Without ISI Mark
31‐12‐2017As per IS 5312
(part 1 )
7M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected] to 600 mm
PN 1.0 & 1.6
With ISI Mark 31‐12‐2017
Cast steel/S.G. Iron/ DI
(without ISI Mark)
50 to 300 mm PN 1.0
50 to 600 mm PN 1.6
Upto 800 mm PN 0.6
Upto 1500 mm PN 1.0
Upto 1500 mm PN 1.6
Upto 900 mm PN 2.0
Upto 1200 mm PN 3.0
S.G. Iron/ Cast Iron
8M/s. Calsens Pvt. Ltd.,
Howrah
Unit‐I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah‐
With ISI Mark 31‐12‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor
Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
‐
9M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune, Maharastra
[email protected]@kbl.co.in
Without ISI Mark
31‐12‐2017
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 600 mm As per IS 5312
(part 1 )
50 to 1200 mm As per IS 5312
(part 2)
11M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah‐711105 (WB)
[email protected] 900 mm
PN 1.0 & PN 1.6
With ISI Mark 31‐12‐2017 ‐
12M/s. Bikaner
Engineering Works, Jaipur
F‐445, Road No. 12, V.K.I. Area, Jaipur‐302013
[email protected] to 300 mm
PN 1.0 & 1.6
Without ISI mark
31‐12‐2017As per IS 5312
(part 1 )
13M/s. Shiva Industries,
Jaipur
gram Niwaroo, Niwaroo Road, Jhotawara, Jaipur‐[email protected]
50 to 300 mmPN 1.0 &
1.6Without ISI
mark31‐12‐2017
As per IS 5312 (part 1 )
14M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot‐360021
[email protected] to 600 mm
PN 1.0 & PN 1.6
Without ISI mark
31‐12‐2017As per IS 5312
(part 1 )
15M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar‐144026
[email protected] to 300 mm
Without ISI Mark
31‐12‐2018
16M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M‐64, Additional M.I.D.C., Satara‐415 004, Maharashtra
[email protected] to 250 mm
up to PN 1.6
Without ISI Mark
31‐12‐2018
17M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar‐[email protected]
50 to 300 mmPN 1.0 & PN 1.6
With ISI Mark 31‐12‐2018 ‐
18M/s. Fouress
Engineering (I) Ltd., Banglore
Plot‐2, Phase‐II, Peanga Industrial Area, Banglore‐[email protected]
450 to 1800 mm
Up to PN 16 (16 bar)
Without ISI Mark
31‐12‐2018Single Door & Multi door
19M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune‐412114
[email protected] to 600 mm
up to 24 kg/sqcm
Without ISI Mark
31‐12‐2018 ‐
31‐12‐201710M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah‐711402
[email protected]@[email protected],
PN 1.0 & PN 1.6
Without ISI Mark
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8
40 to 600 mm PN 1.0
40 to 300 mm PN 1.6
2M/s. Sachdeva Metal works, Jalandhar
C‐33, Focal Point Extension, Jalandhar City‐144001
[email protected] to 450 mm
PN 1.0 & 1.6
Without ISI mark
31‐1‐2017
3M/s. Durga valves Pvt.
Ltd., Howrah
Ichapur road, Canal side, Santragachi, Howrah ‐ 711104
[email protected], [email protected]
40 to 2000 mmPN 1.0 &
1.6With ISI mark 31‐1‐2017
Double Flanged Type
4M/s. Kamala valves & Engg. Pvt. Ltd., Howrah
41/2, 'Q' road, Belgachia, Howrah ‐ 711108
[email protected]@vsnl.net
40 to 1200 mmPN 1.0 &
1.6With ISI mark 31‐1‐2017
Double Flanged Type
40 to 2600 mm 150#Without ISI
mark31‐1‐2017
Class as per API Standard
40 to 2000 mmPN 1.0 & PN 1.6
With ISI Mark 31‐12‐2017 ‐
6M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase ‐III, APIIC, Pashamylaram, Patancheru Mandal,
Medak District‐502307saleshyderabad@vag‐group.com
200 to 4000 mm (DI)
PN 1.0 & 1.6
Without ISI mark
31‐1‐2017 ‐
7M/s. Delval Flow
Controls Pvt. Ltd., Pune
GAT No. 25+37+43/1A, At‐Kavathe, Post Javale, Taluka Khandala, District‐
Satara‐[email protected]@deltechcontrols.com
80 to 2200 mm PN 10
Without ISI mark
(As per BS EN 593/API 609 Specification)
31‐12‐2017 ‐
8M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant‐I)
Plant I‐ A 1/17, GIDC, Pardi, Dist. Valsad, Gujarat
[email protected]@gmail.com
50 to 1000 mmPN 0.6 to
3.0Without ISI
Mark31‐12‐2017
As per IS 13095/ BS 5155‐593 / AWWA C 504
9M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 2400 mm
PN 0.6 to 3.0
Without ISI Mark
31‐12‐2017As per IS 13095/ BS 5155‐593 / AWWA C 504
With ISI mark
5M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village‐ Metoda, Rajkot‐[email protected]
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar‐[email protected]@kartarvalves.com
31‐1‐2017
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
40 to 600 mm PN 1.0 With ISI Mark
Wafer Short, Double flangedCS/S.G. Iron/M.S. Fabricated/DI
40 to 300 mm PN 1.6 With ISI Mark
CS/S.G. Iron/M.S. Fabricated/DI Wafer Short
650 to 2000 mmPN 1.0 & PN 1.6
Without ISI Mark
2100 to 2600 mmPN 1.0 & PN 1.6
Without ISI Mark
( As per AWWA C504 )
40 to 300 mmPN 1.0 &
1.6Wafer Type
40 to 1200 mmPN 1.0 &
1.6Double Flange
upto 3800 mm PN 0.6
upto 3000 mm PN 1.0
upto 2700 mm PN 1.6
upto 2600 mm PN 2.0
upto 800 mm PN 2.5
upto 1200 mm PN 3.0
upto 650 mm PN 4.0
13M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah‐711402
[email protected]@[email protected],
50 to 1200 mmPN 1.0 &
1.6Without ISI
Mark31‐12‐2017 ‐
40 to 1200 mm PN 1.0
40 to 2000 mm PN 1.6
50 to 300 mmPN 1.0 to
1.6
Wafer Short (resilient Seated)
200 to 1200 mmPN 1.0 to
1.6
Double flange short, (resilient
Seated)
With ISI Mark 31‐12‐2017
SG Iron/ Cast steel
14M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah‐711105 (WB)
[email protected] ISI Mark 31‐12‐2017
D.I. (without ISI Mark)
Without ISI Mark
31‐12‐2017
15M/s. Upadhaya valves Manufacturers Pvt. Ltd.,
Kolkatta
P 280 Benaras road, Howrah‐[email protected]
[email protected]@upadhayavalves.net
12M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune, Maharastra
[email protected]@kbl.co.in
With ISI Mark 31‐12‐2017
10M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]‐12‐2017
11M/s. Calsens Pvt. Ltd.,
Howrah
Unit‐I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah‐
CS/S.G. Iron/M.S.
Fabricated/DI Double flange
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
16M/s. Intervalve (India)
Ltd., Pune
94/1 Manjari, Off Soli, Poonawalla Road, Pune‐412307
[email protected] to 2400 mm
PN 0.6, PN 1.0, PN 1.6
Without ISI mark
(As per IS 13095/ BSEN 593/API ‐609 / AWWA C 504)
31‐12‐2018CI, SGI (DI), M.S.
Fabricated
17M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar‐
40 to 600 mm ‐Without ISI
Mark31‐12‐2018 ‐
18M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M‐64, Additional M.I.D.C., Satara‐415 004, Maharashtra
[email protected] to 2800 mm
up to PN 1.6
Without ISI Mark
31‐12‐2018
19M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar‐[email protected]
40 to 300 mm & 350 to 600 mm
PN 1.0 & PN 1.6
With ISI Mark 31‐12‐2018
20M/s. Fouress Engineering
(I) Ltd., Banglore
Plot‐2, Phase‐II, Peanga Industrial Area, Banglore‐[email protected]
100 to 4000 mmUp to PN 40 (40 Bar)
Without ISI Mark
31‐12‐2018
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8 9
15 to 50 mmPN 1.0 &
1.6With ISI mark
50 to 200 mmPN 1.0 &
1.6Kinetic Air
valveWithout ISI
mark
15 to 50 mmPN 1.0 &
1.6Without ISI
mark
50 to 200 mmPN 1.0 &
1.6Kinetic Air
valveWithout ISI
mark
3M/s. Durga valves Pvt.
Ltd., Howrah
Ichapur road, Canal side, Santragachi, Howrah ‐ 711104
[email protected], [email protected]
40 to 200 mmPN 1.0 &
1.6DK With ISI mark 31‐1‐2017
40 to 200 mm PN 1.0 DK With ISI mark
50 to 150 mmPN 1.0 &
1.6DS With ISI mark
50 to 200 mmPN 1.0 &
1.6DS1 With ISI mark
5M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase ‐III, APIIC, Pashamylaram, Patancheru Mandal,
Medak District‐502307saleshyderabad@vag‐group.com
32 to 200 mm (D.I.)
PN 1.0 & 1.6
Without ISI mark
31‐1‐2017
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
25 to 50 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper Proof
Without ISI mark
20 to 200 mmPN 0.6 to
3.0‐
Without ISI mark
31‐12‐2017 ‐
20 to 300 mmPN 0.6 to
3.0Kinetic
Without ISI mark
31‐12‐2017As per
AWWA C‐512
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report submitted by
Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar‐[email protected]@kartarvalves.com
31‐1‐2017
31‐1‐2017C‐33, Focal Point Extension, Jalandhar
City‐[email protected]
M/s. Sachdeva Metal works, Jalandhar
2
4M/s. Kamala valves & Engg. Pvt. Ltd., Howrah
41/2, 'Q' road, Belgachia, Howrah ‐ 711108
[email protected]@vsnl.net
31‐1‐2017
31‐1‐2017
Plot No. 67, Phase‐K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra‐
363310, [email protected]
M/s. Bharat Engineering Works, Dhrangadhra
6
7M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 50 mmPN 1.0, 1.6, 2.0 &
2.5 S‐1 & S‐2
Without ISI mark
CS/S.G. Iron/DI
25 to 200 mmPN 1.0, 1.6, 2.0 &
2.5 DS‐2
Without ISI mark
CS/S.G. Iron/DI
25 to 200 mmPN 1.0, 1.6, 2.0 &
2.5
Double Acting
Kinetic DK Type
Without ISI mark
CS/S.G. Iron/DI
25 to 200 mmPN 1.0, 1.6, 2.0 &
2.5
Double Acting Temper Proof
Without ISI mark
As per AWWA C‐512‐92CS/S.G. Iron/DI
9M/s. Calsens Pvt. Ltd.,
Howrah
Unit‐I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah‐711101
[email protected] to 200 mm
PN 1.0 & 1.6
DS1, DS2 & DK
Without ISI mark
31‐12‐2017 ‐
upto 200 mmPN 16, PN 20 , PN 30
upto 250 mm PN 10
upto 200 mm PN 4.0
11M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah‐711402
[email protected]@[email protected],
50 to 200 mmPN 1.0 &
1.6DS1, DS2 &
DKWith ISI mark
31‐12‐2017Resilient Seated
15 to 40 mmPN 1.0 &
1.6S1
25 to 50 mmPN 1.0 &
1.6S2
40 to 200 mmPN 1.0 &
1.6DS1, DS2 &
DKResilient Seated
upto 40 mmPN 1.0 &
1.6S1
upto 50 mmPN 1.0 &
1.6S2
50 to 200 mmPN 1.0 &
1.6DS2 & DK
15 to 80 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper Proof
Without ISI mark
As per AWWA C ‐
512
Resilient Seated
14M/s. Bikaner Engineering
Works, Jaipur
F‐445, Road No. 12, V.K.I. Area, Jaipur‐302013
[email protected]‐12‐2017
‐
13M/s. Upadhaya valves Manufacturers Pvt. Ltd.,
Kolkatta
P 280 Benaras road, Howrah‐[email protected]
[email protected]@upadhayavalves.net
With ISI mark
31‐12‐2017
Without ISI mark
31‐12‐2017SG iron/ Cast steel
12M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah‐711105 (WB)
With ISI mark
31‐12‐2017
‐
8M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]‐12‐2017
10M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune, Maharastra
[email protected]@kbl.co.in
Kinetic
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 80 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper Proof
Without ISI mark
As per AWWA C ‐
512
25 to 50 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Kinetic
Without ISI mark
17M/s. Fouress Engineering
(I) Ltd., Aurangabad
C‐2, MIDC industrial Area, Paithan, Dist. Aurangabad‐ [email protected]
up to 300 mmUp to PN
2.5‐
Without ISI mark
31‐12‐2018 ‐
18M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune‐412114
[email protected] to 400 mm
Up to 24 kg/sqcm
‐Without ISI
mark31‐12‐2018 ‐
16M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot‐360021
[email protected]‐12‐2017 ‐
15M/s. Shiva Industries,
Jaipur
gram Niwaroo, Niwaroo Road, Jhotawara, Jaipur‐[email protected]
31‐12‐2017
‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class1 2 3 4 5 6 7 8 9
15 mm to 600 mm
150# to 2500#
SluiceWithout ISI
mark
15 mm to 600 mm
150# to 2500#
ConduitWithout ISI
mark
upto 700 mm 150# ‐
Up to 500 mm
300# & 600#
‐
Up to 100 mm
900# ‐
3M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road,
Jalandhar‐[email protected]
50 to 300 mm
‐ SluiceWithout ISI
mark31‐12‐2018
4M/s. Fouress
Engineering (I) Ltd., Banglore
Plot‐2, Phase‐II, Peanga Industrial Area, Banglore‐
50 to 3600 mm
Up to PN 16 (16 bar)
Knife EdgeWithout ISI
mark31‐12‐2018
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Gate Valves as per Vendor Selection Report submitted by
Different TPI (As on Date:‐23‐9‐2015)Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to RemarksType ISI Mark
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Class AS per API Standard1
M/s. GM Engineering , Rajkot
Plot No.2632, GIDC, Lodhika, village‐ Metoda, Rajkot‐360021
[email protected]‐1‐2017
31‐12‐2017As per API 600(SG Iron/ Cast
steel)2
M/s. Kirloskar Brothers Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no.
252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
Without ISI mark
Size Class1 2 3 4 5 6 7 8 9
1M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,
Up to 1500 x 1500 mm
PN 0.6 to 3.0
Sluice (Single faced
circular/Rectangular
Without ISI mark
31‐12‐2017
As per BS 5155‐593/ AWWA C
504
2M/s. Jash Engineering Ltd., Indore (Unit‐II)
Jash Engg. Ltd., Unit‐II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo
Hospital, sanwer Road, Indore‐453111 (MP)
150 x 150 mm to 3000 x 5000 mm
‐ ‐Without ISI
mark31‐12‐2017 As per IS 13349
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Sluice Gate as per Vendor Selection Report submitted by TPI (As
on Date:‐ 23‐9‐2015)Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class
Type ISI MarkApproval Valid up to
Remarks
Size (mm) Class
1 2 3 4 5 6 7 8
6 mm to 700 mm
150# to 900#
Without ISI mark
31‐1‐2017Class AS per API
Standard
50 to 1500 mm
PN 1.6Without ISI
mark31‐12‐2017
Dual plateAs per API 594
2M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant‐I)
Plant I‐ A 1/17, GIDC, Pardi, Dist. Valsad, [email protected]@gmail.com
50 to 1000 mm
PN 0.6 to 3.0
Without ISI mark
31‐12‐2017Dual plate
As per API 594
1000 to 2400 mm
PN 0.6 to 3.0
Without ISI mark
Dual plateAs per API 594
600 to 1200 mm
PN 0.6 to 3.0
Without ISI mark
Multi Door
4M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, [email protected]
50 to 2000 mm
PN 1.0, 1.6, 2.0 &
2.5
Without ISI mark
31‐12‐2017Dual plate
(Double Flange)As per API 594
upto 1500 mm
PN 6
upto 1100 mm
PN 10
upto 1500 mm
PN 16
upto 900 mm
PN 20
upto 600 mm
PN 40
upto 750 mm
150# & 300#
upto 300 mm
600#
upto 100 mm
900#
6M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah‐
711402 [email protected]
[email protected]@gmail.com,
50 to 300 mm
‐Without ISI
mark31‐12‐2017
Dual plate
Dual plateAs per API 594 (SG Iron/ Cast
steel)
Without ISI mark
Check valveBS:‐1868
1M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village‐ Metoda, Rajkot‐360021
3M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant ‐2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,
31‐12‐2017
5M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur,
Dist. Pune, [email protected]
[email protected]@kbl.co.in
Without ISI mark
31‐12‐2017
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report
submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Approval
Valid up to Date
RemarksISI Mark
7M/s. Shiva Industries,
Jaipur
gram Niwaroo, Niwaroo Road, Jhotawara, Jaipur‐[email protected]
50 to 500 mm
PN 1.0 & PN 1.6
Without ISI mark
31‐12‐2017Dual Plate
As per API 594
up to 800 mm
up to PN 1.6
Without ISI mark
Swing Type
up to 1300 mm
up to PN 1.6
Without ISI mark
Dual plate
9M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road,
Jalandhar‐[email protected]
15 to 100 mm
with ISI mark
31‐12‐2018 As per IS 778
8M/s. Fouress Engineering
(I) Ltd., Aurangabad
C‐2, MIDC industrial Area, Paithan, Dist. Aurangabad‐
31‐12‐2018
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Sr. No.
Name of Agency Adress/E‐mail Address Approved Size & ClassApproval Valid up to
Date Remarks
1 2 3 4 5 6
1M/s. Cair Euromatic Automation Pvt. Ltd.,
Ahmedabad
Plot No. 178/179, Shiv Shakti Estate, Nr. V‐Trans, Narol Road, Ahmedabad‐
(A) Rotary Electrical Actuators:‐ Rotary Electrical Actuator for AWWA Butterfly Valve Double flanged, High‐Performance Butterfly valve, Ball vale, 2‐way ball valve, 3‐way ball valve, and rotary Electrical Actuator for 4‐way ball valve, fire safe design ball valve, fabricated butterfly valve
(B) Multi‐turn Electrical Actuators:‐ Multi turn actuator operated sluice valve double flanged, gate valve double flanged, knife‐gate valve, globe valve, control valve
Item Range:‐ (i) Three phase, single phase electrical actuators quarter turn (WP & Ex proof) Torque range:‐ 35 NM to 5000 NM (ii) Multi turn electrical actuators (WP & Flame proof) torque range;‐ 100 NM to 24000 NM(iii) Single phase electrical actuators (Linear) torque range:‐150 kgf to 2500 kgf
31‐1‐2017
2M/s. Rotork Control (I)
Pvt. Ltd., Chennai
28‐B, Ambattur Industrial Estate (North) Chennai‐
mkumar.mahalingam@rotor
k.com
(A) Single Phase Actuator with electrically operated and remotely controlled quarter turn & multi turnCapacity:‐ 30 Nm to 300 Nm (3 kgm to 30 kgm)(B) Three Phase Actuators with electrically operated and remotely controlled quarter turn & multi turn Capacity:‐ 30 Nm to 1000 Nm (3 kgm to 102 kgm)
31‐12‐2017 ‐
3M/s. Auma India Pvt.
Ltd., Banglore
Plot no. 39‐B Phase, Pennya Industrial Area,
Banglore‐[email protected].
Electric Actuators:‐(a) Range From 30 Nm to 1000 Nm(b) 2000 Nm to 16000 Nm with electronic control. (Optional)
31‐12‐2018 ‐
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Motorized Valve Actuators as per Vendor Selection Report
submitted by Different TPI (As on Date:‐23‐9‐2015)
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Approved Size
Size (mm)
1 2 3 4 5 7 8 9
Zero Velocity 100 mm to 2400 mm ‐
Air cushion valve 100 to 300 mm ‐
Zero velocity valve (PSLC)
500 to 2350 mm ‐
Air Cushion valves (QRDA)
100 to 400 mm ‐
Zero Velocity Up to 2700 mmup to 30 kg./sqcm
Air cushion valve up to 400 mmup to 30 kg./sqcm
M/s. Megha Engineering & Infrastructure Ltd.,
Hyderabad
Plot No. 34/B, IDA Jeedimetla, Hyderabad‐
500055, [email protected]
31‐12‐2017 ‐
3M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises,
Talawade, Pune‐[email protected]
31‐12‐2018 ‐
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Water Hammer Devices (Zero Velocity Valves & Air cushion valves) as per Vendor Selection Report submitted by TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail Address Type of Valves ISI MarkApproval Valid up to
Date Remarks
1M/s Jash Engineering Ltd., Indore (Unit‐II)
Jash Engg. Ltd., Unit‐II, Survey No.74, Bardari,
Road, Gram Bardari, Behind Aurobindo Hospital, sanwer Road, Indore‐453111 (MP)
31‐12‐2017 ‐
2
Size (mm) Class
1 2 3 4 5 6 7
1 to 100 MLD ‐ 31‐12‐2017Fine & Course Multi Rake Course Bar
As per customers Requirement
‐ 31‐12‐2017 Track rack screen
1M/s Jash Engineering Ltd.,
Indore (Unit‐II)
Jash Engg. Ltd., Unit‐II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo Hospital, sanwer
Road, Indore‐453111 (MP)[email protected]
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Screens as per Vendor Selection Report submitted by TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval Valid
up to Date Remarks
Size (mm) Class
1 2 3 4 5 6 7 8 9
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar‐
[email protected]@kartarvalves.com
Ball Valve15 to 100
mmCL‐125 & CL‐250
With ISI mark 31‐1‐2017
Ball Valve6 mm to 300
mm150# to 2500#
Ball Valve6 mm to 600
mm150# to 600#
Globe Valve15 mm to 300 mm
150# to 900#
Strainer Valve15 mm to 300 mm
‐
Plug valve15 mm to 200 mm
150#
Needle Valve6 mm to 50
mm150# to 900#
Floating Ball Valve 15 to 300
mm600#
Without ISI mark
AS per API 609
Trunnion Mounted Ball
vales
up to 400 mm
600#Without ISI
mark
AS per API 609
upto 600 mm
PN 0.2
up to 400 mm
PN 1.0
upto 200 mm125#
upto 500 mm150#
upto 200 mm300#
5M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah‐711105 (WB)
[email protected] valve upto 900 mm ‐
Without ISI Mark
31‐12‐2017As per IS: 4038:1979
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka‐Shirpur, Dist. Pune,
Foot valveWithout ISI
mark31‐12‐2017
CI/ S.G. Iron / Cast steel As per IS: 4038
Globe valveWithout ISI
mark31‐12‐2017
As per BS: 1873 ( CI/ SG Iron / Cast Steel)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Other Valves as per Vendor Selection Report submitted by Different TPI (As on Date:‐ 23‐9‐2015)
Sr. No.
Name of Agency Adress/E‐mail AddressApproved Size & Class Approval
Valid up to Date
Remarks Type of Valves ISI Mark
2M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village‐ Metoda,
Rajkot‐[email protected]
31‐1‐2017AS per API Standard
Without ISI mark
3M/s. Delval Flow
Controls Pvt. Ltd., Pune
GAT No. 25+37+43/1A, At‐Kavathe, Post Javale, Taluka Khandala, District‐Satara‐
412801salesindia@deltechcontrols
m
31‐12‐2017
4M/s. Kirloskar Brothers
Ltd., Pune
Pressure Relief valves/ Safety
Valves
Up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Pressure Reducing valve
up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Float Valvesup to 600
mmPN 0.6 to PN 3.0
Without ISI mark
Pressure Sustaining Valves
up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Ball valve15 to 100
mmWithout ISI
mark31‐12‐2018
Gun metal Gate valve, Globe vavle
15 to 100 mm
With ISI mark 31‐12‐2018As per IS 778
8M/s. Perfect Valves PVt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather
Complex, Jalandhar‐[email protected]
Ball valve 1/2" to 4" Class 125 With ISI mark 31‐12‐2018AS per IS 9890:1981
6M/s. Aira Euro
Automation Pvt. Ltd., Ahmedabad
Plot no. 123‐124, Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad‐
380 028airaeuroautomation@gmail
.com
31‐12‐2018
7M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar‐[email protected]
Note:‐ It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Top Related