BERG Energ iekon t ro l l s y s teme
measurement technology – overview
design
for fixed mounting on DIN rail
mobile in case
configurable display
measurement values
harmonics analysis for current and voltage, accuracy class B acc. EN 61000-4-7
flicker measurement acc. . EN 61000-4-15
control of the power supply acc. standard quality with millisecond grid
record of all three-phase values
event-oriented storage of limit exceedance acc. EN 50160 and EN 61000.
communication
direct read out via RS232 or remote read out via ETHERNET
(COM-server / LAN-modem) or Görlitz- Skalar
networking via field bus RS485 up to 32 units
BEA-Q software for analyze and visualizations
Fault indicator output for building management system integration
grid quality_grid analyzer
The grid analyzer is the perfect instrument to monitor the voltage of low- and middle voltage networks. It is
analyzing the long term variation according the norms as a “voltage alarm” , where the standard testing period
is one week. The voltage drops are stored in millisecond intervals and alert of limit exceedance of superior
control systems. For detection of possible disturbing sources in extensive industrial or administration buildings
a networked structure of MFT 6040 via RS485 or Ethernet can be used.
Grid Analyzer – MFT 6040
accessories_current-transformer
types
clamp on transformer ASK 31.3
primary conductor 30x10mm
round conductor 26 mm
transformer width 60 mm
split core current transformer KBU 23 / 58 / 812
primary conductor 20x30 / 50x80 / 80x120mm
transformer width 93 / 125 / 155mm
accessories_external interface modules for UBN and electricity meters
bip 8 II for profibus
DIN rail mounting
convert three-phase values into profibus DP standard protocol
enable to connect up to 8 UBN units
bip 8 S0 for profibus
DIN rail mounting
convert S0 pulses into Profibus DP standard protocol
enable to connect up to 8 meters with pulse output
ccl 220 for LON
DIN rail mounting
convert S0 pulses into profibus DP standard protocol
enable to connect up to 8 meters with pulse outputCCL 220
BIP 8 II
KBU
Berg Energiekontrollsysteme GmbH
Fraunhoferstr. 22 | 82152 Martinsried | Germany
Tel.: 0049 (0)89/379160-0
Fax: 0049 (0)89/379160-199
homepage: www.berg-energie.de
email: [email protected]
ubersicht messtechnik engl_10-04-01.indd 1-3 17.08.2010 11:21:55 Uhr
measurement technology – basic for successful energy managementThe right choice save money!
Due to the majority of the costs of energy management system are with the infrastructure
and measurement the measurement technology has to be selected very carefully.
Use our scope of measurement technology:
From impressive simple to unlimited modularity!
Berg – the energy optimizer
electricity meterThe electricity meter as smallest unit for collection of electric energy flux,
is used as detector in energy- and building management systems.
As calibrated version essential for energy billing.
design
compact design for DIN rail mounting from 1 – 7 pitches
front door installation with adapter frame
optional with mechanical totalizer or with multifunction LCD display
connections
for all low-, middle- and high voltage networks
complete current range: direct- or transformer installation
remote data collection via standard communication
local grid-connected: S0-pulse | LON-bus | M-bus | EIB/KNX | Modbus | Profibus DP
billing ability
accuracy class 1 or 2 acc. EN 61036 or EN 61268
certified on demand
special features
display of three-phase current values
multi tariff function
combined meter active/reactive
DCi BZ 40 DZ+
design
compact design for DIN rail mounting, 6 pitches
door mounting, housing 96x96 or 144x144 mm
functionality
measurement of electrical values in low- and middle voltage networks
precision energy meters for four-quadrant measurement of active, reactive, delivery and supply
harmonics analysis up to 31st order for U, I
bimetal or drag indicator function
Alarm management and threshold setting
equipment
LED or LCD display
integrated memory
serial RS485 / 232 interface
Ethernet (option)
Pulse- and digital in- and outputs (option)
Analog output (option)
communication
standard protocol with Modbus RTU, Berg-ASCII
option: Profibus DP, LON-bus
energy monitoring with Dedalo software
universal BERG network analyzer (UBN)The universal BERG network analyzer provides measuring, controls, and storage of electrical parameters for
low- and middle voltage range. The UBN’s replaces multiplicity of analog measuring instruments (amp meter,
voltmeter). The integrated electricity meter can be used for internal billing of energy cost.
Standard protocols enables the UBN’s to communicate as an detector with building management- and
SPS-systems.
UBN 315 UBN 3100UBN 30
ubersicht messtechnik engl_10-04-01.indd 4-6 17.08.2010 11:21:57 Uhr
measurement technology – basic for successful energy managementThe right choice save money!
Due to the majority of the costs of energy management system are with the infrastructure
and measurement the measurement technology has to be selected very carefully.
Use our scope of measurement technology:
From impressive simple to unlimited modularity!
Berg – the energy optimizer
electricity meterThe electricity meter as smallest unit for collection of electric energy flux,
is used as detector in energy- and building management systems.
As calibrated version essential for energy billing.
design
compact design for DIN rail mounting from 1 – 7 pitches
front door installation with adapter frame
optional with mechanical totalizer or with multifunction LCD display
connections
for all low-, middle- and high voltage networks
complete current range: direct- or transformer installation
remote data collection via standard communication
local grid-connected: S0-pulse | LON-bus | M-bus | EIB/KNX | Modbus | Profibus DP
billing ability
accuracy class 1 or 2 acc. EN 61036 or EN 61268
certified on demand
special features
display of three-phase current values
multi tariff function
combined meter active/reactive
DCi BZ 40 DZ+
design
compact design for DIN rail mounting, 6 pitches
door mounting, housing 96x96 or 144x144 mm
functionality
measurement of electrical values in low- and middle voltage networks
precision energy meters for four-quadrant measurement of active, reactive, delivery and supply
harmonics analysis up to 31st order for U, I
bimetal or drag indicator function
Alarm management and threshold setting
equipment
LED or LCD display
integrated memory
serial RS485 / 232 interface
Ethernet (option)
Pulse- and digital in- and outputs (option)
Analog output (option)
communication
standard protocol with Modbus RTU, Berg-ASCII
option: Profibus DP, LON-bus
energy monitoring with Dedalo software
universal BERG network analyzer (UBN)The universal BERG network analyzer provides measuring, controls, and storage of electrical parameters for
low- and middle voltage range. The UBN’s replaces multiplicity of analog measuring instruments (amp meter,
voltmeter). The integrated electricity meter can be used for internal billing of energy cost.
Standard protocols enables the UBN’s to communicate as an detector with building management- and
SPS-systems.
UBN 315 UBN 3100UBN 30
ubersicht messtechnik engl_10-04-01.indd 4-6 17.08.2010 11:21:57 Uhr
measurement technology – basic for successful energy managementThe right choice save money!
Due to the majority of the costs of energy management system are with the infrastructure
and measurement the measurement technology has to be selected very carefully.
Use our scope of measurement technology:
From impressive simple to unlimited modularity!
Berg – the energy optimizer
electricity meterThe electricity meter as smallest unit for collection of electric energy flux,
is used as detector in energy- and building management systems.
As calibrated version essential for energy billing.
design
compact design for DIN rail mounting from 1 – 7 pitches
front door installation with adapter frame
optional with mechanical totalizer or with multifunction LCD display
connections
for all low-, middle- and high voltage networks
complete current range: direct- or transformer installation
remote data collection via standard communication
local grid-connected: S0-pulse | LON-bus | M-bus | EIB/KNX | Modbus | Profibus DP
billing ability
accuracy class 1 or 2 acc. EN 61036 or EN 61268
certified on demand
special features
display of three-phase current values
multi tariff function
combined meter active/reactive
DCi BZ 40 DZ+
design
compact design for DIN rail mounting, 6 pitches
door mounting, housing 96x96 or 144x144 mm
functionality
measurement of electrical values in low- and middle voltage networks
precision energy meters for four-quadrant measurement of active, reactive, delivery and supply
harmonics analysis up to 31st order for U, I
bimetal or drag indicator function
Alarm management and threshold setting
equipment
LED or LCD display
integrated memory
serial RS485 / 232 interface
Ethernet (option)
Pulse- and digital in- and outputs (option)
Analog output (option)
communication
standard protocol with Modbus RTU, Berg-ASCII
option: Profibus DP, LON-bus
energy monitoring with Dedalo software
universal BERG network analyzer (UBN)The universal BERG network analyzer provides measuring, controls, and storage of electrical parameters for
low- and middle voltage range. The UBN’s replaces multiplicity of analog measuring instruments (amp meter,
voltmeter). The integrated electricity meter can be used for internal billing of energy cost.
Standard protocols enables the UBN’s to communicate as an detector with building management- and
SPS-systems.
UBN 315 UBN 3100UBN 30
ubersicht messtechnik engl_10-04-01.indd 4-6 17.08.2010 11:21:57 Uhr
BERG Energ iekon t ro l l s y s teme
measurement technology – overview
design
for fixed mounting on DIN rail
mobile in case
configurable display
measurement values
harmonics analysis for current and voltage, accuracy class B acc. EN 61000-4-7
flicker measurement acc. . EN 61000-4-15
control of the power supply acc. standard quality with millisecond grid
record of all three-phase values
event-oriented storage of limit exceedance acc. EN 50160 and EN 61000.
communication
direct read out via RS232 or remote read out via ETHERNET
(COM-server / LAN-modem) or Görlitz- Skalar
networking via field bus RS485 up to 32 units
BEA-Q software for analyze and visualizations
Fault indicator output for building management system integration
grid quality_grid analyzer
The grid analyzer is the perfect instrument to monitor the voltage of low- and middle voltage networks. It is
analyzing the long term variation according the norms as a “voltage alarm” , where the standard testing period
is one week. The voltage drops are stored in millisecond intervals and alert of limit exceedance of superior
control systems. For detection of possible disturbing sources in extensive industrial or administration buildings
a networked structure of MFT 6040 via RS485 or Ethernet can be used.
Grid Analyzer – MFT 6040
accessories_current-transformer
types
clamp on transformer ASK 31.3
primary conductor 30x10mm
round conductor 26 mm
transformer width 60 mm
split core current transformer KBU 23 / 58 / 812
primary conductor 20x30 / 50x80 / 80x120mm
transformer width 93 / 125 / 155mm
accessories_external interface modules for UBN and electricity meters
bip 8 II for profibus
DIN rail mounting
convert three-phase values into profibus DP standard protocol
enable to connect up to 8 UBN units
bip 8 S0 for profibus
DIN rail mounting
convert S0 pulses into Profibus DP standard protocol
enable to connect up to 8 meters with pulse output
ccl 220 for LON
DIN rail mounting
convert S0 pulses into profibus DP standard protocol
enable to connect up to 8 meters with pulse outputCCL 220
BIP 8 II
KBU
Berg Energiekontrollsysteme GmbH
Fraunhoferstr. 22 | 82152 Martinsried | Germany
Tel.: 0049 (0)89/379160-0
Fax: 0049 (0)89/379160-199
homepage: www.berg-energie.de
email: [email protected]
ubersicht messtechnik engl_10-04-01.indd 1-3 17.08.2010 11:21:55 Uhr
measurement technology – overview
design
for fixed mounting on DIN rail
mobile in case
configurable display
measurement values
harmonics analysis for current and voltage, accuracy class B acc. EN 61000-4-7
flicker measurement acc. . EN 61000-4-15
control of the power supply acc. standard quality with millisecond grid
record of all three-phase values
event-oriented storage of limit exceedance acc. EN 50160 and EN 61000.
communication
direct read out via RS232 or remote read out via ETHERNET
(COM-server / LAN-modem) or Görlitz- Skalar
networking via field bus RS485 up to 32 units
BEA-Q software for analyze and visualizations
Fault indicator output for building management system integration
grid quality_grid analyzer
The grid analyzer is the perfect instrument to monitor the voltage of low- and middle voltage networks. It is
analyzing the long term variation according the norms as a “voltage alarm” , where the standard testing period
is one week. The voltage drops are stored in millisecond intervals and alert of limit exceedance of superior
control systems. For detection of possible disturbing sources in extensive industrial or administration buildings
a networked structure of MFT 6040 via RS485 or Ethernet can be used.
Grid Analyzer – MFT 6040
accessories_current-transformer
types
clamp on transformer ASK 31.3
primary conductor 30x10mm
round conductor 26 mm
transformer width 60 mm
split core current transformer KBU 23 / 58 / 812
primary conductor 20x30 / 50x80 / 80x120mm
transformer width 93 / 125 / 155mm
accessories_external interface modules for UBN and electricity meters
bip 8 II for profibus
DIN rail mounting
convert three-phase values into profibus DP standard protocol
enable to connect up to 8 UBN units
bip 8 S0 for profibus
DIN rail mounting
convert S0 pulses into Profibus DP standard protocol
enable to connect up to 8 meters with pulse output
ccl 220 for LON
DIN rail mounting
convert S0 pulses into profibus DP standard protocol
enable to connect up to 8 meters with pulse outputCCL 220
BIP 8 II
KBU
Berg GmbH
Fraunhoferstr. 22 | 82152 Martinsried | Germany
Tel.: 0049 (0)89/379160-0
Fax: 0049 (0)89/379160-199
homepage: www.berg-energie.de
email: [email protected]
ubersicht messtechnik engl_10-04-01.indd 1-3 17.08.2010 11:21:55 Uhr
Top Related