GC4: THE PRODUCT
MATERIAL LIST
• 2x2 pieces of wood• 2x4 pieces of wood• 2 pieces of MDF• Card• String
Equipment list
• Hand drill• Long screws• Hinges
STEP BY STEP GUIDE
1. Gather all equipment2. Mark on the wood the measurements3. Cut the wood4. Put the wood together with screws in two
sections (make both sides first then connect beams between them) (make sure to make a pilot hole before drilling in the screw)
5. If not already cut, cut the MDF to size and attach to front and sides and top of counter
6. Cut out holes in both sides for manoeuvrability7. Paint to spec
Top Related