Download - Final Project

Transcript
Page 1: Final Project

DISSERTATION REPORT

ON

“PERFORMANCE APPRAISAL”

 (AT PARLE INDUSTRIES LIMITED)

 

SUBMITTED TO KUMAON UNIVERSITY IN PARTIAL FULFILMENT OF

“BACHELOR OF BUSINESS ADMINISTRARION” 

(THREE YEARS FULL TIME DEGREE PROGRAMME)

 

SUBMITTED BY

 DEEPANSHI JOSHI

B.B.A (IV SEMESTER)

(2008-2011)

 

 

 

JAI ARIHANT INSTITUTE

 

Page 2: Final Project

CERTIFICATE

This is to certify that ANJALI SHARMA has completed the project title “PERFORMANCE APPRAISAL AT BIL.” under my guidance and supervision. She is submitting the project in the partial fulfillment of the requirement for the award Masters of Business Administration, UTTRAKHAND TECHNICAL University, DehraDun. This work is original and has not been published or submitted elsewhere for any purpose what so ever. All sources of information have been mentioned and dully acknowledged.     SUBMITTED TO:MISS. RINKY RANA (FACULTY MBA.DPT.)

Page 3: Final Project

ACKNOWLEDGEMENT

I am very thankful to my Faculty Guide “MISS.RINKY RANA” without whose meticulous attention, invaluable suggestions, encouraging guidance and creative support; I would not have been able to complete my dissertation which is one of the important parts of the MBA program.

 She helped me in simplifying the problems involved in the work. I would also like to thank the overwhelming support of all the people who gave me an opportunity to learn and gain knowledge.    

 DEEPANSHI JOSHI   (BBA.IV SEM) 

Page 4: Final Project

PREFACE    As a part of my BBA IV Sem. program , I was asked to undergo 6 weeks of Summer Training in any organization, so as to give exposure to practical knowledge and to get familiar with the various activities taking place in organization.  I got an opportunity to undergo Summer Training in the reputed organization PARLE INDUSTRIES LIMITED, PANTNAGAR”, where I was assigned the project entitled “PERFORMANCE APPRAISAL.”.  

Page 5: Final Project

DECLARATION

I DEEPANSHI JOSHI student of BBA IV sem. of JAI ARIHANT INSTITUTE, hereby

declare that this Dissertation report “PERFORMANCE APPRAISAL” is written and submitted by me

under the guidance of MISS. DEEPTI SARKI is my original work. The entire analysis and conclusion

of this report are based on the information which is collected by me during the training period.

The empirical finding in the report are based on the data collected myself while preparing this

project. I have not copied any thing from any source or other project submitted for the similar purpose, if

any.

DEEPANSHI JOSHI

Page 6: Final Project

CONTENT

Chapter-1: EXECUTIVE SUMMARY 1-2

Chapter-2: OBJECTIVE OF THE STUDY 3-4

Chapter-3: INTRODUCTION ABOUT BRITANNIA 5-22 Company overview Company Profile Board of Directors Mile stones Activities of the company

PANTNAGAR UNIT Introduction Company Profile SWOT Analysis Department of the company

Chapter-4: PERFORMANCE APPRAISAL 23-44 Definition of Performance Objectives,& Features of Performance Appraisal Process & Methods of Performance Appraisal Key elements of Performance Appraisal Problems of Performance Appraisal Process of Performance Appraisal Performance Appraisal at BIL. Process of Appraisal in Britannia Industries Limited

Chapter-5: LITERATURE REVIEW 45-50

Chapter-6: RESEARCH METHODOLOGY 51-54

Sample Size Method of Sampling Area of work

Page 7: Final Project

Method of Data collection Scope of the study Sources of data collection Limitation of the study

Chapter-7: ANALYSIS & FINDINGS 55-56

Chapter-8: RECOMMENDATIONS 57-58

Chapter-9: CONCLUSION 59-60

Chapter-10: QUESTIONNAIER 61-66

Chapter-11: BIBLIOGRAPHY 67-68

Page 8: Final Project

CHAPTER-I

EXECUTIVE

SUMMARY

EXECUTIVE SUMMARY FOR PERFORMANCE APPRAISAL

Performance appraisals can be a good way for organizations to boost employees' motivation and their competitive edge. But creating useful performance appraisals -- and making sure they are used effectively

Page 9: Final Project

throughout an organization -- isn't easy. The 10 lessons here can help your company move closer to appraisals that help staff perform their best.

"The irony is that our organization has been doing formal appraisals for at least 30 years and we still struggle to do them right. It takes a clear purpose, a good system, and effective managers all operating together to get the job done." -- Director of human resources, Fortune 500 manufacturing organization.

It is common knowledge that most managers and employees find participating in formal performance appraisals as appealing as having a root canal. However, it is also true that -- for better or worse -- formal performance appraisals are an inescapable part of organizational life.

There are two main reasons that formal performance appraisals are here to stay. First, formal appraisals are required to justify a wide range of human resource decisions such as pay raises, promotions, demotions, terminations, and selection validation. They also are key to evaluating recruitment results and determining training needs. Second, formal appraisals are required to maintain a competitive edge. In a recent study of high-performance organizations, the practice of employing a value-added performance appraisal process was cited as one of the top 10 vehicles for creating competitive advantage. The manufacturing organizations in this study clearly stated that an effective appraisal and review process created focus, a platform for measurement, a vehicle for employee improvement, and a means of linking key outcomes to performance.

Our lessons for developing and sustaining a high-performance appraisal system are based upon two key tenets. The first tenet suggests that if appraisal processes operate as a system, a systems perspective must be applied to identify the critical appraisal system components and stages to make sure that organizational procedures and practices work in harmony. The second tenet is that individual managers play a pivotal role in achieving effective appraisals and that they need the right tools and support to be effective.

CHAPTER II

Page 10: Final Project

OBJECTIVE

OF

THE

STUDY

OBJECTIVE OF THE STUDY

The objective for my Dissertation Report, is to make my self capable for moving forward in corporate

world, to gain knowledge & experience & know how to work in the organization environment. It will help

me to gain more & more about corporate sector, which was very essential for me to do. Therefore I joined

BIL Pantnagar to improve my capabilities.

Page 11: Final Project

MAIN OBJECTIVE

To Know about the existing system of Performance Appraisal in Britannia Industries Limited”

To study the awareness of the employees regarding the appraisal system.

To evaluate the effectiveness of appraisal system.

To know the satisfaction of the employees, with the appraisal system followed in BIL.

SUB-OBJECTIVE

Are the present performance appraisal is sufficient enough to analyze the ability of a

company.

To see the difference between the theoretical knowledge & practical knowledge.

Page 12: Final Project

CHAPTER-III

INTRODUCTION

ABOUT

THE COMPANY

Page 13: Final Project

COMPANY OVERVIEW

In 1929 a small company by the name of Parle products emerged in British dominated India. The intent was to spread joy and cheer to children and adults alike, all over the country with its sweets and candies. The company knew that it wouldn’t be an easy task, but they decided to take the brave step. A small factory was set up in the suburbs of Mumbai, to manufacture sweets and toffees. A decade later it was upgraded to manufacture biscuits as well. Since then, the Parle name has grown in all directions, won international fame and has been sweetening people's lives all over India and abroad.

COMPANY PROFILE

TYPE: PUBLIC

Apart from the factories in Mumbai and Bangalore Parle also has factories in Bahadurgarh in Haryana and

Neemrana in Rajasthan, which are the largest biscuit and confectionery plants in the country. Additionally,

Parle Products also has 7 manufacturing units and 51 manufacturing units on contract.

Page 14: Final Project

FOUNDED IN: 1982

HEADQUARTERS: BANGALORE

KEY PEOPLE: Mr.NUSLI WADIA(CM)

MS.VINITA BALI(MD)

INDUSTRY: FOOD

PRODUCTS: BISCUITS, CAKE, BREAD,

BUTTER, MILK, CURD etc

EMPLOYEES: 2,337

REVENU: 22,663 MILLIONS(2009-2010)

WEBSITE: http://www.britannia.co.in

BOARD OF DIRECTORS

Page 15: Final Project

MILE STONES

 1892 The Genesis– Britannia established with an investment of Rs. 295 in

Kolkata

 1910 Advent of electricity sees operations mechanized

NAME DESIGNATION

Mr. Nusli N Wadia Chairman

Ms. Vinita Bali Managing Director

Mr. George Casala Director

Mr. Keki Dadiseth Director

Mr. Avijit Deb Director

Mr. Stephan Gerlich Director

Mr. A K Hirjee Director

Mr. Nimesh N Kampani Director

Mr. S. S Kelkar Director

Dr. Vijay Kelkar Director

Mr. Pratap Khanna Director

Mr. Jeh Wadia Director

Mr. Francois Xavier Roger Director

Field Marshall Sam Manekshaw Director Emeritus

Page 16: Final Project

 

 1921 Imported machinery introduced; Britannia becomes the first company

East of the Suez to use gas ovens

 

 1939- 44 Sales rise exponentially to Rs.16,27,202 in 1939

During 1944 sales ramp up by more than eight times to reach

Rs.1.36crore

 

 1975 Britannia Biscuit Company takes over biscuit distribution from Parry’s

 1978 Public issue – Indian shareholding crosses 60%

 

 1979 Re-christened Britannia Industries Ltd. (BIL)

 

 1983 Sales cross Rs.100crore

 

 1989 The Executive Office relocated to Bangalore

 

 1992 BIL celebrates its Platinum Jubilee

 

 1993 Wadia Group acquires stake in ABIL, UK and becomes an equal partner

with Group Danone in BIL

 

 1994 Volumes cross 1,00,000 tons of biscuits

 

 1997 Re-birth – new corporate identity ‘Eat Healthy, Think Better’ leads to

new mission: ‘Make every third Indian a Britannia consumer’

BIL enters the dairy products market

 1999 “Britannia Khao World Cup Jao” – a major success! Profit up by 37%

 

Page 17: Final Project

 2000 Forbes Global Ranking – Britannia among Top 300 small companies

 

 2001 BIL ranked one of India’s biggest brands

No.1 food brand of the country

Britannia Lagaan Match: India’s most successful promotional activity of

the year

Maska Chaska: India’s most successful FMCG launch

 2002 BIL launches joint venture with Fonterra, the world’s second largest

dairy company

Britannia New Zealand Foods Pvt. Ltd. Is born

Rated as ‘One amongst the Top 200 Small Companies of the World’ by

Forbes Global

Economic Times ranks BIL India’s 2nd Most Trusted Brand

Pure Magic –Winner of the World star, Asia star and India star award for

packaging

 2003 ‘Treat Duet’- most successful launch of the year

Britannia Khao World Cup Jao rocks the consumer lives yet again

 2004 Britannia accorded the status of being a ‘Super brand’

Volumes cross 3,00,000 tons of biscuits

Good Day adds a new variant – Coconut – in its range

 2005 Re-birth of Tiger – ‘Swasth Khao, Tiger Ban Jao’ becomes the popular

chant!

Britannia launched ‘Greetings’ range of premium assorted gift packs

The new plant in Uttarakhand, commissioned ahead of schedule.

The launch of yet another exciting snacking option – Britannia 50-50

Pepper Chakkar.

Page 18: Final Project

OUR PRODUCTS

Page 19: Final Project

WHAT MAKES A BRITANNIA

If you think Britannia’s are extraordinary individuals who are passionate about everything they do…

create inspiration through everything they do…and succeed in everything they do…you’re probably right.

Britannians are hand-picked for a singular purpose…to perpetually ensure Market Leadership and

generate exemplary performance in every function.

Britannians exhibit the following leadership behaviors (we fondly call BULBs – Britannia Universal

Leadership Behaviors)     :

Integrity

Team Orientation

People Development

Page 20: Final Project

Learning Orientation

Customer Orientation

Quality Orientation

Drive for Results

Entrepreneurial Spirit

System and Process Orientation

Communication

 

If feel you stack up well in terms of all these behaviors…don’t waste time…Join us!!!

Page 21: Final Project

OBJECTIVES OF THE COMPANY

The objectives of the company are as follows:

1. To acquire and take over as a going concern the biscuit manufacturing business now carried on at Dum

dum junction under the styles or firms of V.S Brothers and company, Gupta and company and Britannia

biscuits company and all or any of the lands, buildings, plant and machinery, assets and liabilities of the

proprietors of that business in connection there with and with a view thereto to enter into the agreement

referred to in clause 3 of the companies article of association and to carry the same into effect with or

without modification.

2. To manufacture, buy, sell, prepare for market and deal in farinaceous foods for all kinds and in

particular biscuits, breads, cakes and confectionary and food of every description suitable for individuals.

3. To carry on business as millers and grain merchants, dealers in flour, rice and other produces.

4. To carry on business as bakers and confectioners and to manufacture buy, sell, refine prepare, grow,

import export and deal in provisions of all kinds of wholesale and retail, whether solid or liquid.

5. To make, accept, endorse, discount and issue promissory notes, bills of exchange and other negotiable

instruments etc.

Page 22: Final Project

INTRODUCTION

ABOUT

PANTNAGAR UNIT

Page 23: Final Project

INTRODUCTION ABOUT THE UNIT

(PANTNAGAR BRANCH)

INTRODUCTION

Britannia industries limited was established at Pantnagar on 1st April 2005in the area of approximately 20

acres mainly for the purpose of production of biscuits as this area is free from almost all types of taxes.

In Britannia Industries Limited there are many types of departments which are inter connected to each

other and work together for the welfare of the Company as the whole. There is a well built

communication system inside the Company which helps in doing the work on time and with full

efficiency and effectiveness.

The departments of the Company includes Quality assurance, Stores, Production, Purchase,

Maintenance, Engineering, Packaging and dispatch, Personnel and training, Finance, legal and

administrative security.

In the Company when the raw material is entered in the Company from that time onwards the quality of

material is taken into consideration. Firstly the material is taken into the laboratory and it is being tested

and after that it is being taken in progress.

At the production plant also care is being taken for the neatness and cleanness of the biscuits and the

biscuits are prepared in full hygienic conditions. For this purpose all the persons who enter the production

or plant area is not allowed to go inside without wearing a cap.

New concept like 5S is also being implemented in Britannia Industries Limited. The Company is perusing

for ISO14001certificate and it is ISO 22000 certified.

There are four plants in operation in the Company at this branch. First plant is for Marie Gold which has a

flexi line for Good day also. Second plant is for Good day, third one is for 50:50 variants, pepper chakkar

and Maska Chaska. Forth and last plant is for Bourbon which has a flexi line for Orange cream also.

Page 24: Final Project

MAIN EVENTS OF THE COMPANY

1) Bhumi poojan of Britannia industries limited was on 20th may 2004.

2) Machinery was set up on 23rd march 2005.

3) Production trial was taken on 23rd march 2005 itself.

4) Actual production was started on 1st April 2005.

5) First dispatch of finished goods was done on 20th April 2005.

6) Biggest plant of the company is plant number two.

7) The company is set up in an area of approximately 20 acres.

8) Minimum production of the company is 180 tons per day.

9) Maximum production is 300 tons per day.

10) Control of management is through Board of Directors.

11) It is a public limited company.

12) The auditors of the company are Lovelock & Lewes.

13) The bankers of the company are:

State Bank of India.

Standard Chartered Bank.

ABN Ambro Bank.

City Bank.

The hongkong and shanghai banking corporation limited.

Bank of America.

HDFC Bank limited.

ICICI Bank limited.

Page 25: Final Project

NUMBER OF PLANTS AND PRODUCTION AT THE PANTNAGAR

BRANCH

Not all the brands of Britannia are produced in this branch only some brands of biscuits are

produced at this branch.

Production of biscuits in Britannia Pantnagar branch is divided in to four Plants.

1) Plant I

Marigold

Good day butter

Good day Pista badam

2) Plant II

good day cashew

3) Plant III

fifty- fifty (50-50)

i) 50-50

ii) 50-50 Maska Chaska

iii) 50-50 pepper chakker

4) Plant IV

Chocolate treat bourbon

Orange treat

Page 26: Final Project

OBJECTIVES OF THE UNIT

Investing in appropriate technology.

Working collaborators with the business partners.

Quality products to customers.

Continuous training and retraining of the employees to create culture that value quality and food

safety as a core pillar of the business.

To control the wastage and save time and efforts.

To work under the principals of Kiazen, Haccp and 5 S.

THINGS YOU DON’T KNOW ABOUT BRITANNIA

Britannia products are sold in over two million outlets, reaching millions of customers who buy

approximately 2.4 billion packets each year.

A small army keeps Britannia going – over 180 stock keeping units, 3000 employees, over 2200

authorized whole sellers and 56 depots.

The number of biscuits produced by Britannia in one year would be the equivalent of one pack of

twelve biscuits for every two people in the world.

Stacked on top of each other, all Britannia biscuits sold in a year would stand 10,000 times taller

than Mount Everest.

Britannia has had a long association with cricket and cricket players. Nearly half the members of the

current Indian cricket team serve as its brand ambassadors.

Launched in 1997, Tiger became the largest selling Britannia biscuit brand in just 4 months of launch.

It crossed Rs.1 billion sales mark in its very first year and is growing stronger.

Page 27: Final Project

SWOT ANALYSIS

STRENGTH

Goodwill of company

Financially a very strong company

Effective well designed and developed production and marketing network.

Superior quality and service to provide maximum benefits to customers.

The family environment in the company.

Dedicated work force.

Continuous growth.

Market share of the company.

Tax benefit to the company.

WEAKNESSES

No uniform of the officers and of the workers too.

Storage capacity of the company is limited.

Land is not properly utilized.

Raw material is wasted at the time of unloading.

Unit is situated far away from main plant.

There is no board of Britannia at the entry gate.

Page 28: Final Project

OPPORTUNITY

There can be minimization of waste.

There must be more efficient utilization of the raw material.

More and more incentives should be given to workers to motivate them which help in

increasing the employee moral.

There can be use of the foreign technologies for efficient utilization of raw material so that

the production of a biscuit can be increased.

Lang can be used more efficiently.

THREATS

New entrants in the business

Threats of substitute products.

Availability of the other brands.

Rivalry among the competitions.

Taste and preference of customers.

Page 29: Final Project

UNIT HEAD

Human resource

Accounts Production PurchaseMaintenanc

eQuality

OfficersOfficers

OfficersOfficers

Officers Officers

Departments/ hierarchy of the company

There are mainly six departments of the company. These are as follows:

Page 30: Final Project

CHAPTER-IV

INTRODUCTION

ABOUT

PERFORMANCE

APPRAISAL

Page 31: Final Project

PERFORMANCE APPRAISAL

Performance appraisal or merit rating is one of the oldest and most universal practices of management.

Performance appraisal is a method of evaluating the behavior in the works pot, normally including both

the quantitative and aspects of job performance.

It implies assessing the performance of an employee on the job.

A formal defining by C. Heyel is as following:-

“Performance appraisal is the process of evaluating the performance & qualification of the employees in

term of the requirements of the job for which he is employed for the purpose of administration including

placement, selection for promotion, providing financial rewards & other action which require differential

treatment among the member of a group as distinguished from action affecting all members equally.”

According to Dale S. Beach: “Performance appraisal is the systematic Evaluation of the individual with

regard to his or her performance on the job & his potential for development.”

According to Shubin: “evaluation is a systematic appraisal of the employee’s personality traits &

performance on the job & is designed to determine his contribution & relative worth to the firm.”

According to Deal Yoder: “All formal procedures used in working Organization to evaluate personalities

& contribution s & potentials of group member.”

A formal definition of Performance appraisal is that, “It is the systematic evaluation of the individual

with respect to his or her performance on the job & his potential for development.”

A more Comprehensive definition is, “Performance appraisal is a formal structured system of measuring

& evaluating an employee’s job, related behaviors & outcomes to discover how & why the employee is

presently

Performing on the job & how the employee can perform more effectively in the future so that the

employee, organization & society all benefit.”

Under Performance appraisal we evaluate not only the performance of a worker but also his potential for

development.

Page 32: Final Project

TRENDS IN PERFORMANCE APPRAISAL

ITEM FORMER EMPHASIS PRESENT FOCUS

1. Terminology Merit-Rating Performance Appraisal

2. Purpose Determine wage increase,

promotion, transfer, layoff

Development of the

individual improved job

performance.

3. Application For rank & file workers For managerial & technical

personnel.

4. Factors rate d

Personal traits Performance, result or

accomplishment.

5. Techniques Rating scales with emphasis

upon scores

Mutual goal-setting, critical

incidents, group appraisal.

6. Post appraisal Superior communicates his

rating to the subordinate &

seeks to have employee

accept the rating.

Superior stimulates

employee to analyse

himself & set goals with the

help.

FEATURES OF PERFORMANCE APPRAISAL

1) Performance appraisal is the systematic description of an employee’s job relevant strength and

weaknesses.

2) It is a continuous process in every large-scale organization.

3) The basic purpose is to find out how well the employee is performing the job & establish a plan

of improvement.

4) Performance evaluation is not job evaluation.

5) Appraisals are arranged periodically according to a definite plan.

Page 33: Final Project

FUNCTIONS

Identification the areas of training & development.

Helps in reward allocation.

Provide the opportunity to review the strange & weakness of the employees.

It helps in career planning & personnel development.

Helps in establishing credibility of the selection procedure.

Act as a motivation factor.

OBJECTIVES OF PERFORMANCE APPRAISAL

1) SALARY INCREASE: Performance appraisal play a role in making decision about salary

increase. Normally salary increase depends on how employee is performing his job. There is

continuous evaluation of this performance either formally or informally in small organization.

There is direct contact between employees & Performance appraisal has to be a undertaken.

2) PROMOTION: Performance appraisal plays a significance role where promotion is based on

merits most of organization use a combination of merit & seniority for promotion. Performance

appraisal discloses how an employee is working in his present job & what his strong & weak

points are. It can be decided whether he can be promoted or not. It is also used for transfer,

promotion, demotion & discharge of employees.

3) TRAINNING & DEVELOPMENT: Performance appraisal tries to identify the strengths &

weaknesses of an employee on his present job. This information can be used for devising training

& development programmes appropriate for overcoming weakness of the employees.

4) FEEDBACK: Performance appraisal provides feedback to employees about their performance.

It tells them where they stand. A person works better when he knows how he is working first, the

person gets feedback about his performance & try to overcome his deficiencies second, when the

person gets feedback about his performance, he can relate his work to the organizational

objectives.

5) PRESSURE ON EMPLOYEES: Performance appraisal put a post of pressure on employees for

better performance. If the employees are conscious that they are being appraisal in respect of

certain factors & their future largely depends on such appraisal, Appraisal can work automatically

as control device.

Page 34: Final Project

PROCESS OF PERFORMANE APPRAISAL

1)ESTABLISMENT OF PERFORMANCE: We need some kind

of measures again which we are going to compare the performance of employees.

some of these standards are based on job description should be clear enough to be measured &

understood by everyone standers are the expectations.

Establishment of Performance Standards

Establishment of Performance Standards

Establishment of Performance

Standards

Establishment of Performance

Standards

Establishment of Performance Standards

Establishment of Performance Standards

1

4

2

35

6

Page 35: Final Project

2)COMMUNICATE EXPECTATION TO EMPLOYEES: Standards need to be

communicated is employees so that they know what is expected of them & how will they about it.

It has to be received by employees & manager should receive the feedback so that he comes to

know whether employees have understood the intention of communication.

3)MEASURES ACTULY PERFORMANCE: After setting standard you will some critical to

measure the performance of employees.

4)COMPARE ACTUAL PERFORMANCE WITH STANDARD: This is done to

see if any discrepancy exist & if so then how will it be rectified.

5)DISCUSS APPRAISAL WITH EMPLOYEE: Performance of employee is reviewed &

then manager has to convince the employees about his judgment. He conduct meeting with

employees for this purpose.

6)INITIAL CORRECTIVE ACTION: If there is any deviation in performance then suggestive

corrective action can be provided to the employees.

Page 36: Final Project

METHODS OF PERFORMANE APPRAISAL

PERFORMANCE APPRAISAL METHODS

Individual evaluation

method

Multiple-person evaluation method

Other method

Confidential report

Easy evaluation Critical incidents Checklists Graphic rating

scale Behaviorally

anchored Rating scale Forced choice

method

Ranking Paired Comparison Forced Comparison

Group appraisal HRA Assessment center Field review

Page 37: Final Project

APPRAISAL BASED ON TRADITIONAL TRAITS

There are various methods of Performance Appraisal based on traits:

1) Ranking Method: Ranking is the oldest & simplest method of appraisal in which a person is

ranked against other on the basis of certain traits & characteristics. It is not good for large

number5 of employees. It does not indicate absolute or equal difference of ability between

individuals.

2) Faired comparison Method: Paired comparison is a slight variation of ranking system. In this

method each person or employees is compared with all other person. Then the rank is given

according Rader gives rating & puts a tick mark the name of each employee alter which the name

of ticks are counted & the employees having the most no. of tick marks is rated the highest. The

larger the no. of employees the more difficult in composition.

3) Grading: In this method certain categories well in advance & persons are put in their traits &

characteristics such categories are like :- outstanding, goods, average, poor, very poor or may be

in terms of A, B, C, D etc.

4) Forced Distribution Method: It assumes that employee’s performance conforms to the bell-

shaped, this method tries to remove the error of leniency or central tendency error.

10 20 30 40 50

10% - Excellent 30% - Average 20% - Good 40% - Below Average

Page 38: Final Project

This method can be challenged people might question why they have been put in the category.

This method is useful to rate job performance & Promotability.

5) Forced-choice Method: The forced-choice rating method contains a service group of statement

& the rater checks how effectively the statement each individual being evaluated. Since forced

choice is made might be disliked by the managers also depends on whether the statements

properly formulated or not. The ultimate scoring lines with the H.R department.

6) Check- list Method: It is list of traits pertaining to the job. There are two options – Yes or No.

this list is passed to H.R Department & they have a recording key. Accordingly they mark the Yes

or No & give the overall rating. It is easily administered standardized & economical since it is

applicable for everyone.

7) Critical incidents Method: Here focus on the incidents which are crucial for the performance of

job. The behavior of employee is checked & a record is maintained about how he reacted in a

particular situations. Here, since, we are keeping a record of job-related behavior it is more

appropriate. We are considering both effective & iniency & primary basis. Chances of

improvement are there.

8) Graphic scale Method: Graphic scale also known as linear rating scale is the most commonly

used method of performance appraisal. In this method a printed appraisal from is used for each

appraise. It contain various employee characteristics & his job performance various

characteristics include initiative, leadership, dependability, co-operativeness, enthusiasm, creative

ability, decisiveness etc. The rating is done on the basic of scale which is in continuum. The

central idea behind this scaling is to provide the rate varying degree of a particular quality. The

degree of quality is measured on a scale which can very from three points to several points,

graphical scale method is good one in measuring various job behavior of an employee. However

it is not free from rater’s biases.

1 2 3 4 5 6 7 8 9 10

Satisfactory Unsatisfactory

Page 39: Final Project

9) Essay Method: It is a detailed description or narrative form of the employee evaluation. It does

not provide any quantitative data to compare & is very unstructured, one need to have good analytical

& writing skills.

The essay method is useful in providing useful information about an employee on the basic of which

he can be apprised.

10) Field Review Method: Employee are related by any other person expect than the immediate

supervisor or own dept, the person can be from some other dept, or outside the organization ratings

are given on the employees record with organization & the information provided by the supervisor

when he is interviewed by enumerator. A complied report given by the enumerator & is free form

bias. It based on second final information.

APPRAISAL BASED ON MODERN METHOD

1) Assessment Centre: It is only method used for promotion. In this method there is a team of

experts or evaluators who judge the performance. In this method all the candidates who clime for

promotion are called participant. They asked to do different exercise of development or they have

to give the answers of the expert. By this expert know their behavior or attitude & according to

this expert prepare report & gave promotion.

2) Human Resource Accounting Method: Human Resource According are a valuable asset of

any organization. This asset can be valued in term of money. Under this method performance is

judged in term of cost & contributions of employees. Cost of human resource planning,

recruitment, selection, induction, training, compensation etc. Contribution of human resource is

the money of labour productivity or value added by human resources.

3) Behaviorally Anchored Rating Scale (BARS): This method combines graphic rating scales

with critical incidents methods. BARS are descriptions of various degrees of behavior relating to

specifics performance dimensions. The behavior of the employees is checked through graphic

rating method.

Page 40: Final Project

NEED FOR PERFORMANE APPRAISAL

Provide information about the performance ranks basing on which decision regarding salary

fixation, conformation, promotion, transfer & demotion are taken.

To prevent grievances & indisciplinary activities.

Provides information which helps to counsel the subordinate.

Provides feedback information about the level of achievement & behavior of subordinate.

Provides information to diagnose deficiency in employee regarding skill, knowledge, determine

training & developmental need & to prescribe the means for employee growth provides

information for correcting placement.

PURPOSE

To create & maintain a satisfactory level of performance.

To provide information for making decision regarding lay-off, retrenchment, etc.

To guide the job changes with the help to continuous ranking.

To contribute to the employee growth & development through training, self & management

development programmes.

To facilitate for testing & validating selection tests, interview techniques through comparing their

scores with performance appraisal ranks.

To ensure organization effectiveness through correcting employee for standard & improved

performance, & suggesting the change in employee behavior.

To facilitate fair & equitable compensation based on performance.

To help the superior to have a proper understanding about their subordinates.

Page 41: Final Project

KEY ELEMENTS OF PERFORMANCE APPRAISAL SYSTEM

Human Resource Decisions

Employee Record

Performance – Related

Standard

Employee Feedback

PerformanceMeasure

Human Performance

Performance Appraisal

Page 42: Final Project

USES OF PERFORMANCE APPRAISAL

1) PERFORMANCE IMPROVEMENT: Performance feedback allows the employee, manager,

& personnel specialists to intervene with appropriate action to improve performance.

2) COMPENSATION ADJUSTMENTS: Performance evaluation help decision-makers

determine who should receive pay rises. Many firms grant part or all of their pay increases &

bonuses based upon merit, which is determine mostly through performance appraisals.

3) PLACEMENT DECISION: Promotion, transfer, & demotion are usually based on past or

anticipated performance. Often promotions are reward for past performance.

4) TRAINING & DEVELOPMENT NEEDS: Poor performance may indicated the need for

retaining. Likewise, good performance may indicate untapped potential that should be developed.

5) CAREER PLANNING & DEVELOPMANT: Performance feedback guides career decision

about specific career paths one should investigate.

6) STAFFING PROCESS DEFICIENCIES: Good or bad performance implies strength or

weakness in the personnel department staffing procedure.

7) INFORMATION INACCURACIES: Poor performance may indicate errors in job analysis

information, human resource plans, or other parts or the personnel management information

system. Reliance on inaccurate information may have led to inappropriate hiring, training, or

counseling decisions.

8) JOB DECISION ERRORS: Poor performance may be a symptom of ill-conceived job designs.

Appraisals help diagnose these errors.

9) EQUAL EMPLOYMENT OPPORTUNITY: Accurate performance appraisals that actually

measure job-related performance ensure that internal placement may be able to provide

assistance.

FEEDBACK TO HUMAN RESOURCES: Good / bad performance throughout the organization

indicates how well the human resources function is performing.

Page 43: Final Project

PROBLEMS OF PERFORMANCE APPRAISAL1) Rating Biases: The problem subjective measure (is that rating which is not verifiable by others) has

the opportunity for bias. The rater biases include:

(i) Halo effect,

(ii) The error of central tendency,

(iii) The leniency & strictness biases,

(iv)Personal prejudice, &

(v) The recency effect.2) Failure of the superior in conducting performance appraisal & post performance appraisal interviews.3) Most part of the appraisal is based on subjectivity.4) Less reliability & validity of the performance appraisal techniques.5) Negative rating affects interpersonal relating & industrial relations system.6) Influence of external environment factors & uncontrollable internal factors.7) Feedback & post appraisal interview may have a setback on production.8) Management emphasizes on punishment rather than development of an employee in performance

appraisal.9) Some rating particularly about the potential appraisal is purely based on guesswork.

ADVANTAGES OF PERFORMANCE APPRAISAL

There will be an objective analysis of traits of both the superior & subordinate.

There will be change to subordinate to express his views even after performance appraisal.

An employee shall express his emotional needs & his value system, which is considered taboo will

today.

It overcomes the communication barrier.

It will remove the inherent weakness of the appraisal system, i.e., subjective assessment of vague

& abstract performance targets, unclear guidelines for appraisal etc.

Page 44: Final Project

PERFORMANCEAPPRAISAL

ATBRITANNIA

INDUSTRIES LTD.

Page 45: Final Project

Performance & Development Plan

PERFORMANCE APPRAISAL AT BRITANNIA

Definition of performance in MAP is based up on Key Result Areas of KRAs and Routine Responsibilities.

KRAs are ‘critical outcomes towards which effort is directed to achievedesired business results.’

Routine Responsibilities are ‘significant on-going tasks or outcomes that are undertaken or delivered on day-to-day basis.’

Unique Role and Responsibility (URR) templates provide the KRAs, relative weight of KRAs and

Routine Responsibilities, the competencies and their required proficiency levels for a role. The URR

Template in MAP helps deliver consistency and clarity. On expected performance measures to

Appraisee’s and Appraisers alike.

MAP allows the Appraisee to define the performance measures applicable to the Appraisee’s situation

using combination of KRAs and Routine Responsibilities.

The achievement against targets sets for each of these will together constitute the Appraisee’s

Performance Plan in the Performance Cycle or Period.

KRAs Routine Responsibilities

Competencies

Performance Plan Development Plan

Page 46: Final Project

Performance Cycle at a Glance

A Performance Cycle refers to the year for which your performance is being evaluated.

Key phases of evaluating Performance at Britannia:

1. Performance and Development Planning

2. Mid Year Review

3. Final Review

The figure below provides an overview of the Performance Cycle with key dates for each phase.

March-Mid April

Appraiser

ONGOING FEEDBACK

Appraise

Unit/business Sector Draft Budget End February

Offline Performance Planning

Normalision & score

Mid Year Review

Final Review & Feedback

Final Review & Feedback

September-October

Mid April-End April

April

May

Page 47: Final Project

In certain cases, such as those involving a mid-cycle change in role to transfers etc, an Appraisee may be

more than one Performance Plan in a Performance Cycle. The period that each Performance Plan covers

is referred to as the Performance Period for that Performance Plan.

PROCESS OF

PERFORMANCE

APPRAISAL IN

BRITANNIA

INDUSTRIES LIMITED

Page 48: Final Project

BRITANNIA INDUSTRIES LIMITED

STAFF ASSESSMENT FORM

Name: Emp. No. Grade:

Job & Position Title: Function:

A. PERFORMANCE ASSESSMENT from__/__/____to__/__/____Location:

S.No Outcom

e

Measur

e

Standard Weightag

e

%

Achievemen

t

Self

Ratin

g

Coach’

s

Rating

Lo

w

Mediu

m

Hig

h

CRITICAL

KRAs

IMPORTANT

KRAs

Rating Scale for Individual KRAs (1) Needs improvement (2) Meets expectations (3)

Above Expectations (4) Outstanding

OVERALL PERFORMANCE ASSESSMENT (By Coach)

1. Needs Improvement 2. Meets Expectation 3. Above Expectation

4. Outstanding

Page 49: Final Project

EMPLOYEE’S SIGNATURE COACH’S SIGNATURE

Page 50: Final Project

B. POTENTIAL ASSESSMENT

1. LEADERSHIP COMPETENCY: (LC)

Rating scale for individual competency: (Scale would be from 1-4.1 being the lowest

and 4 being the highest)

S.NO. Competency Proficiency required for position Self Rating Coach Rating

1 Team working

2 Thinking logically

3 Listening & Responding

4 Planning & Initiating

OVERALL ASSESSMENT (By Coach)

2. FUNCTIONAL COMPETENCY: (FC)

Rating scale for individual Functional Competency: (Scale would be from1-4.1 being

the lowest and 4 being the highest)

S.NO. Competency Proficiency required for position Self

Rating

Coach Rating

1 Customer Centricity

2 Drive for Results

3 Process & Systems Orientation

4 Innovation

OVERALL ASSESSMENT (By Coach)

C. NEEDS IDENTIFIED FOR TRAINING

LEADERSHIP COMPETENCY FUNCTIONAL COMPETENCY

1

2

3

4

Page 51: Final Project

D. ASPIRATIONS & FEEDBACK

Self assessment(By Employee) Assessment by the coach

STRENGTHS

AREAS FOR

IMPROVEMENT

CAREER ASPIRATIONS

DISCUSSION DETAILS PRE BAT DIALOGUE POST-BAT FEEDBACK

Employee’s Signature _______________ Coach’s Signature____________

Date _______________ Date _____________

OVERALL RANKING:

(Tick appropriate box)

H.R. HEAD FUNCTIONAL HEAD

Outstanding Exceeds Expectation Meets expectation

Needs ImprovementBelow Expectation

Page 52: Final Project

BRITANNIA INDUSTRIES LIMITED

MID-YEAR PERFORMANCE REVIEW

(A copy of the review year (2007-08) BAT Form to be attached with this form)

Employee Name Review Period

Function/Location Coach

PROGRESS ON GOALS (KRAs)

Post discussion of the Employee and Coach, the progress on goals identified on the BAT Form is

noted below…

GOAL REVISION / ADDITIONS, DELETIONS ANOTHER CHANGES IF ANY

(Any change in the Employee’s Job Description or KRAs should be noted here. As

well as areas of work requiring improvement)

TRIANING & DEVELOPMENT REQUIREMENTS INVIEW OF CHANGED ROLE/ JOB

DESCRIPTION

REVIEW COMMENTS

(By Coach)

Employee’s Signature Coach’s Signature

Date: Date:

Page 53: Final Project

CHAPTER-V

LITERATURE

REVIEW

Page 54: Final Project

LITERATURE REVIEW ON PERFORMANCE APPRAISAL

Title: A review of performance appraisal within Liverpool Direct Revenue Services.

Authors: Lamb, Frank

Publisher: University of Chester.

Abstract:

This dissertation sets out to review and explain the challenge of performance management and how this is addressed through the performance appraisal process within Liverpool Direct Revenues Service. The research will examine the elements which constitute a high performing appraisal process and consider the current problems inherent within the appraisal process within the revenues service and the impact this maybe having on service delivery. The study also considers the impact on staff and their development of an appraisal system which is not delivering key messages or addressing individual performance issues. The research used a number of data capture methods. Secondary survey data was used to underline and support findings from the primary interview data. In addition a survey of all frontline staff within the revenues service was undertaken to provide a greater wealth of data and enrich the overall research. As a result of this research it was discovered that the revenues service does not have a coherent performance appraisal process. There exists a clear dichotomy between senior managers and senior officers as to what elements should be present in the performance appraisal. The research also discovered there was little engagement or confidence in the process from the participants. The research makes several recommendations which include the training of all managers within the revenues service and the embedding of the appraisal process within the organisation. Further recommendations are made to improve staff engagement in the process and create better feedback of information.

Page 55: Final Project

Title:Performance without Appraisal (Pay, Promotion, and Improvement)

Authors: Esther Derby (scrum alliance)

Abstract:

The idea of merit rating is alluring. The sound of the words captivates the imagination: pay for what you get; get what you pay for; motivate people to do their best, for their own good. The effect is exactly the opposite of what the words promise. Everyone propels himself forward, or tries to, for his own good, on his own life preserver. The organization is the loser.

Merit rating rewards people who do well within the system. It does not reward attempts to improve the system.

W. Edwards Deming in Out of the Crisis

In my previous column, I suggested that ScrumMasters should steer clear of annual performance reviews. Rating and ranking individuals interferes with a ScrumMaster’s responsibilities as a coach in service to the team. In fact, I went further than that: I suggested that managers and the rest of us steer clear of performance reviews, as well.

My suggestion does run counter to widespread practice. But I’m not alone in questioning performance evaluations and rankings.

W. Edwards Deming identified performance appraisal as one of the Seven Deadly Diseases of Management. Deming is clear and concise in stating the negative effects of performance appraisals and merit ratings: “It nourishes short-term performance, annihilates long-term planning, builds fear, demolishes teamwork, nourishes rivalry and politics.” [Deming p. 102]

More recently, Stanford University professors Robert Sutton and Jeffrey Pfeffer combed through data and studies related to widespread management practices. They reference a survey of 200

Page 56: Final Project

human resource professionals which reports that forced ranking—a common component of performance appraisal programs—results in “lower productivity, inequity and skepticism, negative effects on employee engagement, reduced collaboration, and damage to morale and mistrust of leadership.” [Pfeffer and Sutton, p. 107] They go on to describe the damage done by merit pay plans.

In short, the evidence supporting the benefits of rating, ranking, and then tying pay to the rating—the stuff of performance evaluations—is thin to none. Deming had it right.

My readers did raise legitimate concerns:

Without performance appraisals….

How do we determine how much to pay people?How do we know who to promote or fire?How do people know they need to improve?

Organizations do need answers to these questions. Performance appraisals and pay-for-performance (PFP) aren’t the only way to answer those questions, or even the best way. In this column, I’ll walk through some alternatives to the prevailing practice.

How do we determine how much to pay people?

One reader pointed out, “people get their salaries on an individual basis.” True. Tying annual salary actions to ratings and rankings is just one way to determine what those actions should be. There are other rational and non-capricious ways to adjust individual salaries:

Adjust based on the cost of living so that the buying power of salaries keeps pace with economic conditions.

Allow all employees to share in the company’s success through profit sharing. Adjust salaries based on the current market rate for skills and roles.

Another reader posed the rhetorical question, “So all certified scrum masters earn the same amount?”

Performance is a function of the person and the environment. Systems thinking and lean production at Toyota tell us that gains in productivity come from inspecting and adapting the system, not from focusing on individual performance. An improvement mindset, thinking for the long term, eliminating waste, respect for people, and removing impediments bring high performance.

Page 57: Final Project

Still, there are people who are clearly outstanding performers (both outstandingly good and outstandingly poor), who outperform the limits of the system. Once again, pay increases based on performance ratings is only one way to accomplish the goal of recognizing outstanding individuals.

People—and their jobs—evolve over time. ScrumMaster may start off coaching a team on the basics of Scrum, and over time, take a bigger role working on systemic issues that hinder the team. Or he may develop exceptional coaching skills. If someone is truly performing above others within the same job it may be time to promote him or reclassify his job so that it’s at a higher pay level.

How do we know who to promote or fire?

Other readers asked, “Without yearly ratings, how will we know who to promote?” Looking at how a person has evolved in his job and the level of responsibilities is one way. Another option is to treat promotions as seriously as hiring: create a rigorous internal application process that involves interviews and auditions.

The truth is that many outstanding performers aren’t doing it for the money. They stay for love of their work and are most rewarded by new and challenging assignments.

The reverse question came up, too: “How will we know who to fire?”

It doesn’t take a rating to fire someone. If someone isn’t doing his job, there’s no reason to keep him on the payroll until the annual review cycle comes around. A ScrumMaster will know when someone isn’t doing his job or is making it harder for other people to do their jobs. He can coach the person, or if coaching is not or is no longer an option, work with a functional manager to move the person off the team. (Some teams manage their own team membership, and people who need to go move off the team, without a manager’s involvement.) And, poor performers will hang onto a job even if they aren’t receiving raises. They won’t be improving, though. They’ll be harboring resentment and telling themselves that they really are above average.

As with identifying outstanding good performers, consider the environment, as well as individual skills. Ask whether someone is truly underperforming, or whether the system is limiting his performance.

I spoke with a new agile coach recently who was beginning to doubt he was in the right role. “I just can’t get this group moving in the right direction,” he said. “Maybe I should go back to being a developer.”

When he described the situation to me in detail, I began to wonder if any new coach could move this group in the right direction. The project has several stakeholders who disagree about the direction

Page 58: Final Project

of product. The team is split into three factions, which swirl around a long standing conflict between two team members. One member of the team is skeptical of agile methods and baits the coach at every opportunity. When he’s not baiting the coach, he’s working to bring other team members to his point of view. The new coach is struggling in his job. The person who is supposed to mentor him is missing in action. I don’t think firing him—or giving him a low rating—is the answer.

It would be more fruitful (and more difficult) to look at the system that assigned a brand new coach to this project and failed to provide support.

How do people know they need to improve?

How will people know they need to improve if they don’t have an annual review? The answer to this question is simple (though not easy): their ScrumMaster will tell them.

A letter or number rating or ranking is an evaluation. It may tell someone he needs to improve, but it doesn’t tell him what specifically he needs to do differently. In order to improve, people need clear behavioral descriptions and they need to understand the impact of behavior or results. Some managers provide specific examples along with the letter or number evaluation grade. However, most humans resist labels, so they may be busy with the emotional response to the rating, and not ready to fully listen as the manger gives examples.

Scrum runs on frequent feedback loops. That includes feedback to people on their work interactions and work results. Feedback on an annual cycle is worse than useless and is totally out of congruence with agile methods.

When organizations adopt Scrum, sooner or later they bump up against the problems caused by asking people to work collaboratively and then measuring and rewarding them for individual effort. But Scrum is all about making issues visible, so we can inspect and adapt. The time has come look at the evidence about pay and appraisal systems. We may want to succumb to the allure of the “merit pay” words, but performance appraisals are a barrier to delivering valuable software; it’s time for them to go.

Page 59: Final Project

CHAPTER-VI

RESEARCH METHODOLOGY

Page 60: Final Project

RESEARCH METHODOLOGY

When we talk of Research Methodology, we not only talk of the research methods but also consider the

logic behind the methods we use in the context of our research study and explain why we are using a

particular method or technique and why we are not using so that research results are capable of being

evaluated either by research himself or by others.

As the title of the project suggests the project is about the study of the performance appraisal in the

company. So my objective is that to know that how the working appraisal should be maintained in the

company & which method is used in this.

Performance Appraisal has been considered as a most significant and indispensable tool for every

organization for the information it provides is highly useful in making decisions regarding various aspects

such as promotions and merit increases. Thus, an attempt was made to study the Performance Technique

in BRITANNIA.

SAMPLE SIZE

The sample size refers to the no. of employees selected from the co. to constitute a sample. The sample

size used for study includes 80 employees from the company.

METHOD OF SAMPLING

The process employed for the sample was Random Sampling. Random Sampling is the sampling in which

every person has an equal opportunity of being selected in the sample. The method is more representative

of the persons as there are no personal biases.

Sample Size: The sample size taken is 80 in which 20 were executives and 60 were supervisors and

workers

Method of Sampling: Random Sampling

Area of work: Performance Appraisal

Page 61: Final Project

Method of Data collection:Primary and Secondary.

PRIMARY DATA

Primary data is that data, which is collected for the first time & thus happens to be original in character.

The primary source to carry out study is:-

a) Questionnaire

b) Schedule

c) Observation

d) Interview

SECONDARY DATA

Secondary data are those which have already been collected by someone else and have already been

passed through the statistical process.

Acc. to Dessel-“Data collected by other persons”

All the data has been collected from internal source, that includes :-

a) Magazines

b) Books

c) Websites

d) Reports

e) Files

f) Staff

SCOPE OF THE STUDY

It provides useful information for research and also introduces the researcher with the practical problem

faced in the company. This research is very important for any Human Resource student to gain a real time

experience. I have done my research at Britannia in Performance Appraisal.

There are many departments in Britannia but my research work is confined with Human Resource

department where I studied that how the Performance Appraisal method should be done.

Page 62: Final Project

TOOLS FOR DATA COLLECTION

The data was collected by me from both the sources for my Dessertation report. In primary method of

data collection personal interviews was used and in case of secondary ways of data collection of

magazines and books of Britannia were used.

LIMITATION TO THE STUDY

Following are the limitations of this project:-

♣ While going through the research I had faced a bit problem like frequent visits were required.

♣ Workers and supervisors were not immediately responding.

♣ Due to the tight schedule of managers, there are some difficulties for me to get co-operation and

attention.

♣ Extra large unit to cover.

♣ Large no. of employees in the company, more than 2000, not possible to cover entire lot.

Page 63: Final Project

CHAPTER-VII

ANALYSIS

&

FINDINGS

Page 64: Final Project

ANALYSIS & FINDINGS

In BIL, I Came to Know about the appraisal method of an employee. During my visit at BIL, I found that it works under the guidance of its head office.

The Appraisal method of an employee was totally based up on the proper test and interview of an employee.

I also found that their appraisal Method was very good.

The time period for appraisal is based on quarterly basis.

Besides all the above findings I also found that the BIL is the well reputed, well managed and the well built company. The Management of company is very Hardworking in nature and takes care about the well being of their staff and workers.

They are provided with all the required facilities. They are goal oriented and work as a team in a whole and the main emphasis of the company is on the quality products manufacturing.

I also found that in the last month of the financial year highest production and the highest dispatch was made.

Page 65: Final Project

CHAPTER-VIII

RECOMMENDATIONS

Page 66: Final Project

RECOMMENDATIONS

After making a Study on the topic of Performance Appraisal system in BIL, I Would Suggest that the following Points should be implemented:-

Give the employee a few days notice of the discussion and its purpose.

Prepare notes and use the completed performance appraisal form as a discussion guide so that each important topic will be covered.

Be ready to suggest specific developmental activities suitable to each employee’s needs.

They would suggest changes in job analysis & standards, if necessary.

There should be no negative ratings because it affects interpersonal relations and industrial relations systems.

The feedback must be positive, corrective on observed behavior and facts and not on inferences, assumptions or what one has heard from others.

The final performance rating must be done in a fair manner.

Appraisal tools must be relate to the employees satisfaction.

Page 67: Final Project

CHAPTER-IX

CONCLUSION

Page 68: Final Project

CONCLUSION

At last it is concluded that the company as a whole is a well branded company. The goodwill of the

company is very high.

After having a study of the present system of Performance Appraisal system in Britannia Industries

Limited Rudrapur I have come up with a conclusion that Britannia industries Limited employees are

aware of the system of Performance Appraisal being followed in their organisation i.e. KRA(staff

assessment form). Most of the employees hold the view that the system of KRA is effective to

evaluate and truly reflects their roles and activity.

About the company it is derived that the company is very well managed and its management is

highly devoted towards the quality of their products and the well being of their staff members and

workers.

Staff members and workers are also work very enthusiastically and complete every assignment on

time. Every one is very supportive in nature and cooperate each other. They work effectively and

efficiently to achieve the company goals and the individual goals. This is the reason that the

company is achieving commanding heights and the last month of the financial year 2009-2010 made

the records of highest production and highest dispatch and BRITANNIA as a whole has achieved

the Second position in the FMCG sector in India.

Page 69: Final Project

CHAPTER-X

QUESTIONNAIRE

Page 70: Final Project

Performance appraisal questionnaire:-

I/ Employee information

1. Employee name:2. Position:3. Department:4. Start working from:

II/ Rating scales

Yes / No / NA

III/ Appraisal questions

1. Are u satisfied with the methods of Performance Appraisal?

2. Quality of personal objective setting is poor.

3. Which method of performance appraisal is mostly used in your company?

4. Ratings are sometimes seen as based on subjective judgments?

5-IS Appraisal method of an employee totally based up on the proper test and interview of an employee?

Page 71: Final Project

1.Are u satisfied with the methods of Performance Appraisal?

(a) Yes

(b)No

Ans:

Interpretation:-

65% of employees are satisfied with the methods used by company for performance appraisal,but 35% of employees are not satisfied with the methods used in performance appraisal.

2. Quality of personnel objective setting is poor ?

(a) Yes

(b)No

Ans:

Page 72: Final Project

Interpretation:-

55% of employees think that quality for setting personnel objective is poor where as 45%of employees think its not so.

3.Which method of performance appraisal is mostly used in your company?

(a) Individual Method

(b) multiple-person evaluation method

(c) others

Ans:

Interpretation:-

Multipe –person evaluation method is mostly used according to 5o% of employees,40%

says individual method is used and 10% says other methods are used.

Page 73: Final Project

4. Ratings are sometimes seen as based on subjective judgments.

(a) Yes

(b) No

Ans:

Interpretation:-

40% employees says,yes that ratings are sometimes seen to be based on subjective judgment,where as 60% of employees says no.

Page 74: Final Project

5-IS Appraisal method of an employee totally based up on the proper test and interview of an employee?

(a) Yes

(b) No

Ans:

Interpretation:-

70% of employees says that appraisal method is totally based up no proper test and

interview but 30%of employees does not agree with this.

Page 75: Final Project
Page 76: Final Project

CHAPTER-XI

BIBLIOGRAPHY

Page 77: Final Project

BIBLIOGRAPHY

Websites

www.britindia.com

www.sidcul.com

www.google.com

Books

PERSONAL MANAGEMENT----------- C.B. MAMORIA

ESSENTIALS OF HUMAN RESOURSE MANAGEMENT AND

INDUSTRIAL RELATIONS ------------ P.SUBA RAO

MANAGING HUMAN RESOURSE------ R.S. DWIVEDI