8/12/2019 Ficha Braum L955 Millennium Series
1/43
8/12/2019 Ficha Braum L955 Millennium Series
2/43
Congratulations
We at The Braun Corporation wish to express our fullest appreciationon your new purchase. With you in mind, our skilled craftsmen have de-
signed and assembled the finest lift available.
This manual includes safety precautions, lift operating instructions,
manual operating instructions, and instructions for maintenance and lubrica-
tion procedures.
Your lift is built for dependability, and will bring you years of pleasure
and independence, as long as maintenance is performed regularly and the lift
is operated by an instructed person.
Sincerely,
THE BRAUN CORPORATION
Ralph W. Braun
Chief Executive Officer
8/12/2019 Ficha Braum L955 Millennium Series
3/43
Page 1
Contents
Lift Terminology
Lift Terminology Illustration .................................... 2
Introduction ............................................................ 3
Direction ................................................................. 3
Lift Components ...................................................3-5
Lift Actions and Functions ...................................5, 6
Lift Operation Safety
Safety Symbols ...................................................... 7
Lift Operation Safety Precautions ......................8-11
Pre-Lift Operation Notes and Details
General Safety ................................................ 12, 13
Lift Control Switches ....................................... 13, 14
Lift Features
Bridge Plate ................................................... 15
Automatic Floor Level Switching .................... 15Automatic Roll Stops .................................16-18
Roll Stop Latch ............................................... 18
Latch Operation ........................................ 18, 19
Bridging .......................................................... 19
Handrails ........................................................19
Lift Passengers
Passenger Orientation (Boarding Direction) ... 20
Vehicle (Floor Level) Loading and
Unloading .......................................................20
Wheelchair-equipped Occupant Seat Belts .......... 21
Operation Procedure Review .......................... 21, 22
Preventive Maintenance..................................22, 23
Lift Operating Instructions ............................24-30
Manual Operating Instructions .....................31-33
Decals and Antiskid ...................................... 34, 35
Maintenance and Lubrication ......................36, 37
Warranty and Registration Instructions ...... 38, 39
8/12/2019 Ficha Braum L955 Millennium Series
4/43
THEBRAUNCORPORATION
P.O.BO
X 310WINAM
ACIN
46996
219-94
6-6153
1099
DOM
SERIALNUM
BER
MODELL955U
314248
01.01
33 .28.14CB
PATENT
TM
Page 2
PumpModule(Rear)
Roll Stop Latch
Module-mountedControl Switches
Towers (2)
Pump Side
Cylinder
Base Plate
Unfold Assist Compression Springs (2)
Top Parallel Arms (2)
Adjustable Quiet-Ride Bumper
Opposite Pump Side Cylinder
Vertical Arm Covers (4)Opposite Pump Side Vertical Arm
Handrail-mounted Up/Down Switch
Roll Stop Cylinder(not visible -underside of platform)
Platform Side Plates (2)
Automatic Roll Stop (ARS)
PlatformRotating PivotSlide Arms (2)
Platform Pivot Arms (2)
Pump Side Vertical Arm
Bottom ParallelArms (2)
OutboardLeft (Rear)
Right (Front)Inboard
Lift TerminologyIllustration
Side Entry Roll Stop (L955SE only)
Bridge Plate
Handrails (2)
Bridge PlateExtension
L955U: Roll stop cylinderand latch are on oppositeside of platform.
8/12/2019 Ficha Braum L955 Millennium Series
5/43
Page 3
Lift Terminology
Introduction:
Braun L955 Millennium Serieslifts are consumer oriented(designed to allow operation bythe wheelchair passenger). L955lift models provide fully automaticoperation of all lift functions aswell as optional automatic dooroperators (if so equipped).
The L955 Millennium Lift Seriesincludes variations of L955SEand L955U lift models. Lift modelnumbers indicate platform/rollstop configuration and physicaldimensions. A standard L955SElift model is depicted in the LiftTerminology Illustration. Thebridge plate extension is bolted to
the bridge plate (as shipped). Instepwell applications where
additional platform length isrequired, the extension plate maybe bolted to the heel (inboard
end) of the platform.
Lift operation procedures areidentical for all L955 Series liftmodels. The operating Instruc-tions contained in this manualand appearing on lift-postedoperating instructions decalsaddress the lift control switches
and the corresponding lift func-tions. Instructions are providedfor manual operation of the lift inevent of power or equipmentfailure.
Terminology: Become familiarwith the terminology that will beused throughout this manual.
Become familiar with the identifi-cation of lift components and their
functions. Contact your lift salesrepresentative or call The BraunCorporation at 1-800-THE LIFT if
any of this information is not fullyunderstood.
Direction: The terms "left (rear),""right (front)," "inboard," and"outboard" will be used through-out this manual to indicatedirection (as viewed from outsidethe vehicle looking directly at the
lift). Refer to the Lift TerminologyIllustration for clarification ofdirection terms.
Lift Components
Refer to the Lift TerminologyIllustration for identification of liftcomponents.
Pump Module: The lift-mounted
8/12/2019 Ficha Braum L955 Millennium Series
6/43
Page 4
Lift Terminology
pump module consists of thehydraulic pump, the manual handpump and electrical components
that power the lift electric/hydrau-lic systems.
Module-mounted ControlSwitches: The pump module isequipped with three color-codedand function-labeled controlswitches (OPEN/CLOSE, IN/OUTand UP/DOWN). The switches
activate the automatic lift func-tions and optional door operators.Further details are provided in theLift Pre-Lift Operation section(page 13).
Lift Frame: The lift frameconsists of the base plate, twotowers, the parallel arms, the
vertical arms, platform pivot armsand the handrails. The two main
hydraulic cylinders are housed inthe parallel arms. The electrical/hydraulic powered lift frame
components mechanically unfold,lower, raise and fold the liftplatform assembly.
Bridge Plate: The bridge plateassembly consists of the bridgeplate (striker back) and the bridgeplate extension (flap). The hingedbridge plate assembly bridges the
gap between the lift platform andthe vehicle floor when the platformis positioned at floor level. Note:The bridge plate extension (flap) isbolted to the bridge plate (asshipped) in the Lift TerminologyIllustration. In stepwell applica-tions where additional platformlength is required, the extension
plate may be bolted to the heel(inboard end) of the platform.
Dual Handrails: Dual handrailsare provided for wheelchairpassenger use. The handrails
automatically unfold to thedeployed position when theplatform unfolds and fold auto-matically to the stowed positionwhen the platform folds. Thepassenger may choose to grip thehandrails when on the lift platform(if applicable). Note:An addi-tional UP/DOWN control switch is
built into the right (front) handrail.
Platform Assembly: The liftplatform assembly consists of thesteel tubing frame with gratingsurface upon which the wheel-chair is positioned, the outboardroll stop, roll stop latch, the sideentry roll stop (SE only), and the
hydraulic cylinder assembly thatpowers the outboard roll stop.
8/12/2019 Ficha Braum L955 Millennium Series
7/43
Page 5
Lift Terminology
Manual Operation System: Amanual backup hand pump isbuilt into the pump module. The
lift platform can be unfolded,lowered, raised and folded usingthe hand pump. Manual Opera-tion Instructions are provided onpages 31-33.
Lift Actions and Functions
UNFOLD (Out) - Platform
Unfold: Unfold is the action ofthe platform rotating out anddown from the fully-stowed(vertical) position to floor level(horizontal) position when theUNFOLD switch is pressed.
DOWN - Platform Lower: Downis the action of the platform
lowering from floor level positionto fully-lowered (ground level)
position when the DOWN switchis pressed.
DOWN - Roll Stop Unfold(Deploy)- When the platformreaches the fully-lowered(ground) position and the DOWNswitch is continued to bepressed, the outboard roll stopand the side entry roll stop rotatedownward from vertical positionto ramp position.
UP - Roll Stop Fold (Raise):When the lift is fully lowered andthe roll stops are in the rampposition, pressing the UP switchfirst rotates the roll stops upwardfrom ramp position to verticalposition.
UP - Platform Raise: Up is theaction of the platform raising
Automatic Roll Stop(s):L955SE and L955U lift platformsare equipped with a cylinder-
powered outboard roll stop thatprovides a ramp for wheelchairloading and unloading at groundlevel. L955SE platforms areequipped with an outboard rollstop and a side entry roll stop.The side entry roll stop is useful intight parking situations by reducingwheelchair caster turn-out when
boarding and exiting the platform.The two roll stops function to-gether in unison.
Roll Stop Latch: The spring-loaded latch locks the outboardroll stop in the vertical positionwhen the platform raises aboveground level.
8/12/2019 Ficha Braum L955 Millennium Series
8/43
Page 6
from ground level to floor level(fully-raised) position when theUP switch is pressed.
FOLD (In) - Platform Fold: Foldis the action of the platformrotating up and in from the floorlevel (horizontal) position to fully-stowed (vertical) position whenthe FOLD switch is pressed.
Stowed Position: The lift is
stowed when the lift platform hasbeen fully raised and folded fully(vertical position).
Floor Level: Floor level is theposition (height) the platformassembly reaches in order forthe wheelchair passenger toenter and exit the vehicle (fully
raised). The platform automati-cally stops at floor level when
Lift Terminology
unfolding from the stowedposition and when raising fromground level.
Note: Further details regardinglift control switches and thecorresponding lift functions areprovided in the Pre-Lift OperationNotes and Details section.
8/12/2019 Ficha Braum L955 Millennium Series
9/43
Page 7
Safety Symbols
Lift Operation Safety
SAFETY FIRST! Know That ...
supplements (if included), isprovided for your safety. Famil-iarity with proper operationinstructions as well as propermaintenance procedures are
necessary to ensure safe,troublefree operation. Safetyprecautions are provided toidentify potentially hazardoussituations and provide instructionon how to avoid them.
All information containedin this manual and
Note: Additional information provided to help clarify or detail a specific subject.
These symbols will appear throughout this manual as well as on the labels posted on your lift. Recognizethe seriousness of this information.
WARNING
This symbol indicatesimportant safetyinformation regardinga potentially hazard-ous situation thatcould result in seriousbodily injury and/orproperty damage.
CAUTION
This symbol indicatesimportant informationregarding how toavoid a hazardoussituation that couldresult in minor per-sonal injury or prop-erty damage.
CA B
D
8/12/2019 Ficha Braum L955 Millennium Series
10/43
Page 8
Lift Operation Safety Precautions
Read manual and supplement(s) before operating lift. Read
and become familiar with all safety precautions, pre-liftoperation notes and details, operating instructions andmanual operating instructions before operating the lift. Note:Wheelchair passengers and all transit agency personnel(drivers and wheelchair lift attendants) must read andbecome familiar with the contents of this manual andsupplement(s) before operation.
Load and unload on level surface only.
Engage vehicle parking brake before operating lift.
Provide adequate clearance outside the vehicle to accom-modate the lift before opening lift door(s) or operating lift.
WARNING
Lift Operation Safety
WARNING
WARNING
WARNING
Inspect lift before operation. Do not operate lift if you suspect lift damage, wear or anyabnormal condition.
Keep operator and bystanders clear of area in which the lift operates.WARNING
WARNING
WARNING
If the lift operatinginstructions, manualoperating instructionsand/or lift operationsafety precautions arenot fully understood,contact The Braun
Corporation immedi-ately. Failure to do somay result in seriousbodily injury and/orproperty damage.
8/12/2019 Ficha Braum L955 Millennium Series
11/43
Page 9
WARNING Whenever a wheelchair passenger (or standee) is on the platform, the: Passenger must be positioned fully inside yellow boundaries Wheelchair brakes must be locked
Roll stops must be up (vertical) Roll stop latch must be fully engaged Passenger should grip both handrails (if able).
Load and unload clear of vehicular traffic.
Do not overload or abuse. The load rating applies to both the raising and lowering functions- continuous lifting capacity is 800 lbs.
Do not operate or board the lift if you or your lift operator are intoxicated.
Do not raise front wheelchair wheels (pull wheelie) when loading (boarding) the platform.
Open lift door(s) fully and secure before operating lift.
Position and secure (buckle, engage, fasten, etc.) the wheelchair-equipped occupant seatbelt (torso restraint) before loading onto the wheelchair lift platform.
Lift attendants must ensure that lift occupants keep hands, arms and all other body partswithin the lift occupant area and clear of moving parts.
WARNING
WARNING
WARNING
Lift Operation Safety
WARNING
WARNING
WARNING
WARNING
8/12/2019 Ficha Braum L955 Millennium Series
12/43
Page 10
Lift Operation Safety Precautions
Lift Operation Safety
Platform must be positioned at floor level (bridge plateheight) when loading or unloading in and out of vehicle.
Do not use platform roll stops as a barrier (brake). Stop andbrake wheelchair when loading onto the platform (manuallystop and brake manual wheelchairs stop powered wheel-chairs with the wheelchair controls).
Turn powered (electric) wheelchairs off when on lift platform.
Press the DOWN switch until the entire platform rests onground level (lowered fully) and the outboard roll stop is fullyunfolded (ramp position) before loading or unloading apassenger at ground level.
Outboard platform roll stops must be fully unfolded (rampposition) until the entire wheelchair crosses roll stops whenloading or unloading at ground level.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING Accidental activation of control switch(es) may cause unintended operation(s).
WARNING
If the lift operatinginstructions, manualoperating instructionsand/or lift operationsafety precautions arenot fully understood,
contact The BraunCorporation immedi-ately. Failure to do somay result in seriousbodily injury and/orproperty damage.
8/12/2019 Ficha Braum L955 Millennium Series
13/43
Page 11
Lift Operation Safety
WARNING Maintenance and lubrication procedures must be performed as specified in this manual byauthorized (certified) service personnel.
Replace missing, worn or illegible decals.
Keep this operator's manual in lift-mounted manual storage pouch when not in use.
Never modify (alter) a Braun Corporation lift.
Do not use accessory devices not authorized by The Braun Corporation.
Do not remove any guards or covers.
Keep clear of any hydraulic leak.
Failure to follow these safety precautions may result in serious bodily injury and/or prop-erty damage.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
8/12/2019 Ficha Braum L955 Millennium Series
14/43
Page 12
Pre-Lift Operation Notes and Details
Braun L955 Millennium Series liftsare consumer oriented (designed toallow operation by the wheelchair
passenger). L955 Series lifts aretypically installed in vehiclesequipped with fully-automatic dooroperators. The L955 provides fullyautomatic operation of all lift func-tions as well as optional automaticdoor operators (if so equipped).Note: An attendant must manuallyopen and close lift door(s) in appli-
cations where power dooroperator(s) are not provided.
It is the responsibility of the liftoperator (attendant and/or wheel-chair passenger) to properly activateall power (lift and door) functions.
Read and become familiar with all lift
operation safety precautions, pre-liftoperation notes and details, lift
operating instructions and manualoperating instructions before at-tempting lift operating procedures.
Become familiar with all lift featuresand the proper operation of the liftcomponents beforeattempting liftoperation. Refer to the Lift Terminol-ogy section for identification of anddesrciption of lift components.Contact The Braun Corporationimmediately if any of this information
is not fully understood. Call 1-800-THE LIFT.
General Safety: Before operatingthe lift, always engage the vehicletransmission in Park P and engagethe vehicle parking brake. Liftoperators (attendants), wheelchairpassengers and bystanders must
keep clear of the area in which thepower doors (if equipped), and the lift
WARNING
Read and becomefamiliar with all liftoperation safetyprecautions, pre-liftoperation notes anddetails, operatinginstructions andmanual operatinginstructions prior to
operating the lift. Ifthis information is notfully understood,contact The BraunCorporation immedi-ately. Failure to do somay result in seriousbodily injury and/orproperty damage.
8/12/2019 Ficha Braum L955 Millennium Series
15/43
Page 13
Pump Module ControlSwitches: The lift-mounted
Pre-Lift Operation Notes and Details
Door(s) Platform
Press switches upwardfor these functions:
Press switches downwardfor these functions:
CLOSE IN (Fold) UP
OPEN OUT (Unfold) DOWN
Door(s) Platform
Yellow Orange Red
Yellow Orange Red
operates (clear of all movingparts). The lift occupant (passen-ger) must keep hands, arms and
all other body parts within the lift
Control Switches
occupant area and clear ofmoving parts. Follow all liftoperation and wheelchair passen-
ger information detailed in thismanual.
WARNINGDiscontinue lift useimmediately if any liftcomponent does notoperate properly.Failure to do so mayresult in seriousbodily injury and/or
property damage.
control switches are color-codedand function-labeled to corre-spond to the color coding andswitch-function labels that appear
on the lift operating instructionsdecal. Triangular-shaped color-coded symbols ( ) appear onthe lift operating instructionsdecal. The color of the symbolcorresponds to the color of theswitch to be used. The direction(point) of the symbol correspondswith the direction the switch
should be activated (pressed) toproduce the intended lift function.
8/12/2019 Ficha Braum L955 Millennium Series
16/43
Page 14
Pre-Lift Operation Notes and Details
Control Switches(continued)
UP
DOWN
Handrail UP/DOWN Switch: A
spring-loaded horizontal-slidestyle switch is built in the right(front) handrail. The handrail UP/DOWN switch activates theplatform and the roll stops (sameas pump-mounted UP/DOWNswitch). Slide the switch knob out
to the UP position to raise theplatform. Slide the knob in to theDOWN position to lower theplatform.
Auxiliary Control Switches: Asix-touch remote control system,a third station control, a hand-held control and an outsidecontrol station are available asoptions. All auxiliary controls
activate lift functions and auto-matic door operators except thehand-held control. The hand-held control activates lift func-tions only.
Do not press lift-mountedswitches and auxiliary controlstation switches at the sametime. Do not attempt to interface
after-market control systems.
Braun Corporation After-market Control SystemsPolicy:
The Braun Corporationmanufactures dedicatedcontrol systems for itsproducts. These controlsystems have been de-signed and tested for use inconjunction with specific
Braun products. Brauncontrol systems are the onlycontrol systems authorizedfor use with Braun products.
Do notattempt to interfaceaftermarket control systemswith Braun products. To doso may result in serious
bodily injury and/or prop-erty damage.
8/12/2019 Ficha Braum L955 Millennium Series
17/43
Page 15
Pre-Lift Operation Notes and Details
Bridge Plate: The hinged bridge
plate assembly bridges the gapbetween the lift platform and thevehicle floor when the platform ispositioned at floor level. Thebridge plate assembly consists ofthe bridge plate and the bridgeplate extension.
Typically, the bridge plateextension is bolted to thebridge plate as shown in the LiftTerminology Illustration (stan-dard bridge plate configura-tion). In stepwell applicationswhere additional platformlength is required, the exten-sion plate may be bolted to theheel (inboard end) of theplatform.
When the OUT (Unfold) switchis pressed and the platformunfolds from stow position tofloor level, the bridge plate isautomatically deployed to thebridging (horizontal) position.When the IN (Fold) switch ispressed and the platform folds
from deployed (horizontal)position to stowed position, the
bridge plate folds (rotates) to thevertical position.
The outboard edge of the bridgeplate extension rests on the liftplatform (standard bridge plateconfiguration). When theextension plate is bolted to theheel of the platform, the bridgeplate rests on the extensionplate.
Automatic Floor Level Switch-ing: When the platform unfoldsfrom the stowed position, theplatform stops automatically atfloor level when fully unfolded.When raising the platform fromground level, the platform auto-matically stops at floor level when
raised fully.
Fully-Unfolded (horizontal)
Bridge Plate (bridging position)
Lift Features
8/12/2019 Ficha Braum L955 Millennium Series
18/43
Page 16
Pre-Lift Operation Notes and Details
Lift Features (continued)
Although the L955 featuresautomatic floor level switching,the lift operator (wheelchairpassenger or attendant), mustviewthe platform to be certainthe platform is properly posi-tioned at vehicle floor level and
the bridge plate is properlypositioned when a passengeris entering or exiting thevehicle. If the lift platform doesnot automatically stop at floorlevel as outlined, discontinuelift operation immediately.
Automatic Roll Stops: TheL955SE platform is equippedwith an outboard roll stop and
a side entry roll stop (L955U liftmodels are not equipped with aside entry roll stop). Seephotos A, B and C. Bothcylinder-powered roll stopsprovide a ramp for wheelchairloading and unloading atground level. The side entryroll stop is useful in tight
parking situations by reducingwheelchair caster turn-out
when boarding and exiting theplatform. The two roll stopsfunction in unison. Detailsfollow. Discontinue lift opera-tion immediately if either rollstop does not operate prop-erly.
Belt-operated Side Entry Roll Stop(L955SEmodels only)
Aluminum Extruded Outboard Roll Stop
AWARNINGDiscontinue lift useimmediately if any liftcomponent does notoperate properly.Failure to do so mayresult in seriousbodily injury and/or
property damage.
8/12/2019 Ficha Braum L955 Millennium Series
19/43
Page 17
Pre-Lift Operation Notes and Details
Fully-EngagedRoll Stop Latch
Latch Foot
Fully-Folded
(Up-vertical)Roll Stops
Fully-Unfolded(Ramp position) Roll Stops
Disengaged
Roll StopLatch
B C
Outboard Roll Stop: When theplatform lowers fully to groundlevel, the roll stop cylindercompression spring automati-cally unfolds (rotates) the rollstop to the ramp position (fullyunfolded). See photos A and B.Although the outboard roll stopis lift-powered, the activation of
the roll stop is controlled by thelift operator. Activating eitherDOWN switch unfolds the rollstop. The roll stop is cylinder-powered to automatically fold(rotate) to the vertical positionwhen the UP switch is activated(roll stop raises before platformraises).
Side Entry Roll Stop: Whenthe platform lowers fully toground level, the spring-loadedside entry roll stop unfolds(rotates) to the ramp positionsimultaneously with the out-board roll stop (when DOWNswitch is activated). See photosA and B. The belt and chain
2"
Note: The platform must raise
approximatelytwo inchesbeforethe latch engages fully.
L955U: The roll stoplatch is on opposite
side of the platform.
8/12/2019 Ficha Braum L955 Millennium Series
20/43
Page 18
Pre-Lift Operation Notes and Details
Lift Features(continued) Roll Stop Latch: A spring-loaded latch engages theoutboard roll stop when theroll stop rotates upward fromramp position to the verticalposition (UP switch is acti-vated to raise the platformabove ground level).
Note: The platform mustraise approximately twoinches beforethe latchengages fully(see photo C on17). L955U: The roll stop latchand roll stop cylinder are on theopposite (left) side of platform.
The latch disengages the rollstop when the platform lowersfully (reaches ground level)and the latch foot contacts theground (latch raises above the
roll stop).
Outboard Roll Stop and RollStop Latch Operation: The lift
WARNINGDiscontinue lift useimmediately if any liftcomponent does notoperate properly.Failure to do so mayresult in seriousbodily injury and/or
property damage.
The lift operator or attendant mustbe certainthe entire platform
reaches and rests safely on theground.
driven roll stop is powered bythe roll stop cylinder to auto-matically fold (rotate) to thevertical position when the UPswitch is activated.
8/12/2019 Ficha Braum L955 Millennium Series
21/43
Page 19
Pre-Lift Operation Notes and Details
operator must activate theDOWN switch to lower theplatform fully to the ground. Thelift operator or attendant mustviewthe platform as it lowers tobe certainthe entire platformreaches and rests safely on theground. Stop activating theDOWN switch if any portion ofthe platform is obstructed whiledescending or the platform doesnot reach ground level for anyreason(contact with an obstruc-tion, mechanical failure, exceed-ing the lift floor-to-groundcapacity, etc.).
After the platform is fully lowered(platform reaches the ground),the lift operator should continueto press the DOWN switch to
unfold the outboard roll stop andthe side entry roll stop fully(ramp position). Note: The rollstops must be fully unfoldeduntil the entire wheelchair hascrossed the roll stops whenloading or unloading at groundlevel. Discontinue lift opera-tion immediately if the rollstops or latch do not operateproperly.
Bridging: The L955SE incorpo-rates a bridging feature. Thisfeature stops the down travel ofthe platform if the outboard endof the platform contacts a raisedsurface (such as a curb), pre-venting the operator from lower-ing the inboard end of theplatform.
Handrails: Dual handrails areprovided for wheelchair passen-ger (or standee) use. Thehandrails automatically unfold tothe deployed position when theplatform unfolds and fold auto-matically to the stowed positionwhen the platform folds. Thepassenger may choose to gripthe handrails when on the liftplatform (if applicable).
Note: The right (front) handrailis equipped with an UP/DOWNcontrol switch (details in ControlSwitches section). Discontinuelift operation immediately ifthe handrails do not operateproperly.
8/12/2019 Ficha Braum L955 Millennium Series
22/43
Page 20
Pre-Lift Operation Notes and Details
the fully-up(vertical) position andthe outboard roll stop latch mustbe fully engaged whenever awheelchair passenger is on theplatform.
Do not use the outboard roll stopas a barrier (brake). Stop andbrake the wheelchair when fullyloaded on the platform. Manuallystop and brake manual wheel-chairs. Stop powered wheel-chairs with the wheelchair con-trols. Turn powered (electric)wheelchairs off when on theplatform.
Vehicle (Floor Level) Loadingand Unloading: The platformmust be fully raised(at floorlevel) and the bridge plate mustbe properly positioned whenloading or unloading a passenger
in or out of the vehicle. Althoughthe L955 features automatic floorlevel switching,it is the respon-sibility of the lift operator toensure the platform and thebridge plate are properlypositioned at floor level whenloading and unloading passen-gers.
If the roll stops, bridge plate,handrails or any other lift compo-nent does not operate as outlinedin this manual, discontinue liftuse immediatelyand contactyour sales representative or callThe Braun Corporation at 1-800-THE LIFT. One of our nationalProduct Support representativeswill direct you to an authorizedservice technician who willinspect your lift.
Lift Passengers
Do not attempt to load or unloada passenger in a wheelchair orother apparatus that does not fiton the platform area. Do notexceed the 800 pound loadcapacity of the lift.
Passenger Orientation (Board-ing Direction): The wheelchairpassenger must face outwardwhenever on the platform.
The passenger must be posi-tioned in the center of theplatformto prevent side-to-sideload imbalance. Other personsshould notride on the platformwith the wheelchair passenger.
The wheelchair brakes must belocked, the roll stops must be in
8/12/2019 Ficha Braum L955 Millennium Series
23/43
Page 21
WARNING
Position and secure(buckle, engage,
fasten, etc.) thewheelchair-equippedoccupant seat beltbefore loading ontothe wheelchair liftplatform. Failure todo so may result inserious bodily injuryand/or property
damage.
The Braun Corporation recom-mends wheelchair passengersposition and buckle their wheel-
chair-equipped seat belt (torsorestraint) as specified by themanufacturebeforeloading ontoa wheelchair lift.
Different types of disabilitiesrequire different types of wheel-chairs and different types ofwheelchair-equipped occupantrestraint belt systems (torsorestraint). It is the responsibilityof the wheelchair passenger tohave his or her wheelchairequipped with an occupantrestraint (seat belt) under thedirection of their health careprofessional.
Wheelchair lift attendants shouldbe instructed on any special
needs and/or procedures requiredfor safe transport of wheelchairpassengers.
Operation Procedure Review
The Braun Corporation recom-mends that the wheelchair liftuser and/or attendant review thesafety precautions and operationprocedures appearing in thismanual and on lift-posted decalswith your wheelchair lift salesrepresentative, beforeattemptinglift operation. Any questions orconcerns can be answered byyour sales representative at thattime.
Using your own wheelchair,operate the lift through allfunctions and enter and exit the
Wheelchair-Equipped Occupant Seat Belts
Pre-Lift Operation Notes and Details
8/12/2019 Ficha Braum L955 Millennium Series
24/43
Page 22
vehicle with the salesrepresentative on hand toensure the lift is right for youas the end user (applicablefor your use based on yourphysical abilities and thephysical characteristics ofyour personal wheelchair).Become familiar with theproper operation of your liftbefore operating the lift byyourself.
This lift operators manualmust be stored in the lift-mounted manual storagepouch when not in use.
Maintenance is necessary toensure safe and trouble-free liftoperation. Preventive liftmaintenance consisting ofcareful inspections of your liftsystem and cleaning the liftshould be a part of your routine.Simple inspections can detectpotential lift operational problems.
Regular preventive maintenancewill reduce potential lift opera-tion downtime and increase theservice life of the lift, as well asenhancing safety.
During routine inspections,operate the lift through a mini-mum of one complete cycle andnote the following:
Do the automatic door(s) openfully (if equipped)?
Does the lift safely clear thedoor(s) when unfolding andfolding?
Do the lift control switchesfunction properly?
Do the automatic roll stopsoperate properly?
Does the roll stop latch oper-ate properly?
Do the handrails fuctionproperly?
Is the power source adequateor weak?
Exposure to harsh weatherelements, environment condi-tions, or heavy usage, etc. mayrequire more frequent mainte
Pre-Lift Operation Notes and Details
Preventive Maintenance
8/12/2019 Ficha Braum L955 Millennium Series
25/43
Page 23
WARNING
Maintenance andlubrication proce-
dures must be per-formed by authorizedservice personnel asspecified in theapplicable installa-tion/service manual.Failure to do so mayresult in seriousbodily injury and/or
property damage.
Pre-Lift Operation Notes and Details
nance and lubrication proce-dures.
Preventive maintenance visualinspections do nottake the
place of the procedures speci-fied in the Maintenance andLubrication Schedule providedin the applicable lift installationand service manual. Refer tothe Maintenance and Lubrica-tion section in this manual forfurther details.
8/12/2019 Ficha Braum L955 Millennium Series
26/43
Page 24
Lift Operating Instructions
WARNING
Read and becomefamiliar with all liftoperation safetyprecautions, pre-liftoperation notes anddetails, operatinginstructions andmanual operatinginstructions prior to
operating the lift. Ifthis information is notfully understood,contact The BraunCorporation immedi-ately. Failure to do somay result in seriousbodily injury and/orproperty damage.
Before lift operation, park thevehicle on a level surface, awayfrom vehicular traffic. Place the
vehicle itransmission in Parkand engage the parking brake.
Photos appearing in the LiftOperating Instructions depict liftfunctions being activated by lift-mounted control switches only.
Lift-posted Warnings and Lift
Operating Instructions decal24069 provides lift operatinginstructions. Replace anymissing, worn or illegibledecals.
Follow the Manual OperatingInstructions provided on pages31-33 in event of power or
equipment failure.
WARNING
Whenever apassenger is on theplatform, the: Passenger must
face outward Wheelchair brakes
must be locked Roll stops must be
UP
Failure to do so mayresult in seriousbodily injury and/orproperty damage.
8/12/2019 Ficha Braum L955 Millennium Series
27/43
Page 25
Lift Operating Instructions
To Open Door(s):
Automatic Door Operator(s):
Press yellow OPEN switch untildoor(s) are fully open. Releaseswitch.
Manual Door(s):
Manually open door(s) fullyandsecure.
To Unfold Platform (Out):
Press orange OUT switch untilplatform stops (unfolds fullyreaches floor level). Releaseswitch.
A B
DC
8/12/2019 Ficha Braum L955 Millennium Series
28/43
Page 26
DOWN
Lift Operating Instructions
2.Press red DOWN switch until the
entireplatform reaches groundlevel (stops) and roll stop unfoldsfully (see Photos H and I). Re-lease switch.
Handrail Switch: Slide knob in to
DOWN position. See Photo G.
E F
HG
To Unload Passenger:
1. Read notes below! Load passen-
ger onto platform facing outwardand lockwheelchair brakes.
Note:Roll stops mustbe UP androll stop latch mustbe fully en-gaged beforeloading passengeronto platform. Lower headtoclear vehicle door jamb header.
8/12/2019 Ficha Braum L955 Millennium Series
29/43
Page 27
Lift Operating Instructions
To Unload Passenger: (continued)I
3.Unlock wheelchair brakes and
unload passenger from platform.
Note:Roll stops mustbe fullyunfolded(ramp position) until theentire wheelchair has crossed theroll stop. See Photos K and L.
K L
J
8/12/2019 Ficha Braum L955 Millennium Series
30/43
Page 28
UP
Lift Operating Instructions
To Load Passenger:
1.Load passenger onto platform
facing outwardand lock wheel-chair brakes.
Note:Roll stops mustbe fullyunfolded(ramp position) until theentire wheelchair has crossed theroll stop. See Photos K and L.
2.Press red UP switch until platformstops (reaches floor level). Re-
lease switch.
Handrail Switch: Slide knob out toUP position.
Note:Roll stops mustbe UP androll stop latch mustbe fully en-gaged beforeraising platform.Platform will raise above ground
level approximately two inchesbeforelatch engagesfully. approximately2"
M N
P
O
8/12/2019 Ficha Braum L955 Millennium Series
31/43
Page 29
To Load Passenger (continued):
3.Unlock wheelchair brakes and load
passenger from platform intovehicle. Note: Lower head toclear door jamb header.
To Fold Platform (In):
Press orange IN switch untilplatform stops(fully folded).Release switch.
Lift Operating Instructions
Q
S
R
T
8/12/2019 Ficha Braum L955 Millennium Series
32/43
Page 30
Lift Operating Instructions
To Close Door(s):
Automatic Door Operator(s):
Press yellow CLOSE switch untildoor(s) are fully closed. Releaseswitch.
Manual Door(s):
Manually close door(s) fully.
U
8/12/2019 Ficha Braum L955 Millennium Series
33/43
Page 31
WARNINGContact The BraunCorporation beforeadjusting hydraulic
pressure reliefvalve. Failure todo so may result
in serious bodilyinjury and/orproperty damage.
22249
MicroswitchAdjustmentInstructions
Unfold/Down(Top)Microswitch
Turn adjustment bolt counterclockwiseto stop platform unfold function sooner.Turn adjustment bolt clockwise to allowplatform to unfold further.
Up/Fold(Bottom)Microswitch
Turn adjustment bolt clockwise to stopplatform raise function sooner. Turnadjustment bolt counterclockwise to allowplatform to raise further. 24242
MANUALINSTRUCTIONS
TO UNLOAD PASSENGER:
1. TO UNFOLD PLATFORM (OUT):
Using hand pump handle: a. Open hand pump valve
counterclockwise (open 1/2 turn only)until platform reaches floor level.
b. Close hand pump valve clockwise.
2. DOWN (TO LOWER):
Use hand pump handle to open (turn) hand pump valve counterclockwise (open 1/2 turn only).
TO LOAD PASSENGER:
1. UP (TO RAISE):
Using hand pump handle: a. Close hand pump valve clockwise. b. Insert handle in pump and stroke until
platform reaches floor level.
2. TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
19448
HAND PUMP
VALVE
Close valvebefore operatingelectric pump.
HAND PUMP
OPEN
CL
OSE
Manual Operating Instructions
If you experience power or equip-
ment failure, refer to the ManualOperating Instructions to operate
the lift. Instructions and photos are
provided for all steps that differ
from standard lift operation proce-dures. Manual Instructions Decal
27146 (posted on pump cover)provides manual operating instruc-
tions also. Refer to the Lift Operat-
ing Instructions for all normal liftoperation procedures (such as
loading and unloading passengers).Follow all Lift Operation Safety
Precautions!
Release Valve
maximum30 inch lbs
minimum
15 inch lbs
seats(stops)
OPEN
CLOSE
approximate1/16" intervals
Valve TighteningSpecification:Once valve seats(stops), tighten 15to 30 inch poundsas shown.
Release Valve
Note: Close backup
pump release valvesecurely beforeoperating
electric pump.A
( T):
Press O UT switchuntil platform stops(reaches floorlevel).
TO UNLOAD PASSENGER:
1. Load passenger ontoplatform facing outwardand lock wheelchairbrakes.
2. Press DOWN switchuntil platform stops androll stopunfolds fully.
3. Unlock wheelchairbrakes and unloadpassenger from platform.
TO LOADPASSENGER:
1. Load passenger ontoplatform facing outwardand lock wheelchairbrakes.
2. Press UP switch untilplatform stops(reaches floor level).
3. Unlock wheelchairbrakes and unloadpassenger from platfor m.
TO FOLD PLATFORM (IN):
Press IN switch untilplatform stops.
TO CLOSE DOOR(S):
Press CLOSE switchuntil door(s) are fullyclosed.
24069
8/12/2019 Ficha Braum L955 Millennium Series
34/43
Page 32
Open(Down)
Close(Up/Stop)
Manual Operating Instructions
Refer to photos and illustration ofrelease valve on previous page.
To Unfold Platform (Out):
Using hand pump handle (Photo B):
a. Place slotted end of pump handleonto back-up pump release valveand turn counterclockwise(open 1/2 turn only) until theplatform reaches floor level(fullyunfolded). See Photo C.
b. Turn the release valve clockwise(close) to stop the platform. See
Photo C.
Note: Valve must be tight, but donotovertighten.
Place slotted end of pump handle
onto back-up pump release valve
DOWN To Lower Platform: To Unfold Roll Stop:
B C
HandPumpHandle
and turn counterclockwise(open 1/2 turn only) until the platformreaches ground level and/or roll
stop unfolds.
8/12/2019 Ficha Braum L955 Millennium Series
35/43
Page 33
Open(Down)
Close(Up/Stop)
E
Using hand pump handle:
a. Place slotted end of pump handleonto back-up pump release valveand turn clockwiseto closesecurely. See Photo D.
Note: Valve must be tight, but donotovertighten.
b. Insert handle into back-up pumpand stroke until platform reachesfloor level (see Photo E).
To Fold Platform (In):
Insert handle into back-up pump andstroke until platform stops(foldsfully). See Photo E.
Manual Operating Instructions
UP To Fold Roll Stop: To Raise Platform:
D
Refer to photos and illustration ofrelease valve on page 31.
Note: Close back-up pump releasevalve securely beforeoperatingelectric pump.
8/12/2019 Ficha Braum L955 Millennium Series
36/43
Page 34
TM
12375
Fairfield, NJ USAOslo, Norway
Clearwater, FL USAKitchener, Ontario Can.
Huntington Beach, CA USARocklea, Queensland Aust.
"Providing Access to the World"International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT (219) 946-6153 FAX: (219) 946-4670
Parking Courtesy
Requested
1237517866
25652
25652
Microswitch Adjustment Instructions
Unfold/Down (Top) Microswitch
Turn adjustment bolt counterclockwiseto stop platform unfold function sooner.Turn adjustment bolt clockwise to allow
platform to unfold further.
Up/Fold (Bottom) Microswitch
Turn adjustment bolt clockwise to stopplatform raise function sooner. Turnadjustment bolt counterclockwise to allow
platform to raise further. 24242
24242
Replace missing, worn
or illegible decals.Failure to do so mayresult in serious bodilyinjury and/or propertydamage.
WARNING
Decals and Antiskid
Decals
The lift is only as safe as
the operator. Replace anymissing, worn or illegibledecals! Part numbers areprovided for decals. Inspectyour lift for missing, worn orillegible decals. Call 1-800-THE LIFT for replacements.
WARNINGContact The BraunCorporation beforeadjusting hydraulicpressure reliefvalve. Failure todo so may resultin serious bodilyinjury and/orproperty damage.
22249
27146
22249
24069
Note: Clean surfaces as
detailed on opposite pagebefore posting decals.
WARNINGLift installation and servicing prohibited byanyone who has not been certified by The BraunCorporation Sales and Service School. Certifiedservice technicians should call 1-800-THE LIFTto receive applicable installation/service manual.
Failure to follow this policy may result in seriousbodily injury and/or property damage.25675
25675
LIFT OPERATINGINSTRUCTIONS
WARNINGRead manualbefore operatinglift.Loadandunloadonlevel surfaceonly.Engage vehicleparking brakebeforeoperatinglift.Provide adequateclearance outsideofvehicle toaccommodatelift.Donotoperateliftifyou suspectlift damage,wear oranyabnormalcondition. Keep operator andbystandersclearof area
inwhichliftoperates.
Wheneverawheelchairpassengerison theplatform,the:
Passengermust face outward
Wheelchairbrakes must belocked
RollstopmustbeupFailuretofollow theserulesmayresult inseriousbodilyinjuryand/or property damage.
TO OPEN DOOR(S)
Press OPEN switchuntil door(s) are fullyopen.
TO UNFOLD PLATFORM(OUT):
Press OUT switchuntil platform stops(reaches floor level).
TO UNLOAD PASSENGER:
1. Load passenger ontoplatform facing outwardand lock wheelchairbrakes.
2. Press DOWN switchuntil platform stops androll stop unfolds fully.
3. Unlock wheelchairbrakes and unload
passenger from platform.
TO LOAD PASSENGER:
1. Load passenger ontoplatform facing outwardand lock wheelchairbrakes.
2. Press UP switch untilplatform stops(reaches floor level).
3. Unlock wheelchairbrakes and unload
passenger from platform.
TOFOLDPLATFORM(IN):
Press INswitchuntil platformstops.
TOCLOSEDOOR(S):
Press CLOSEswitch untildoor(s)are fully closed.
24069
MANUALOPERATION
Using hand pump handle:
TO UNFOLD PLATFORM (OUT):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke untilplatform folds fully (stops).
3. Open hand pump valve (turn
counterclockwise) until platform reachesfloor level. Open 1/2 turn only.
4. Close hand pump valve (turn clockwise).
DOWN (TO LOWER):
Open hand pump valve (turncounterclockwise). Open 1/2 turn only.
UP (TO RAISE):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke untilplatform reaches floor level.
TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
Close valve before operating electric pump.
27146
OP
EN
CL
OSE
OPEN
CLOSE
UP
DOWN
26701
26701
8/12/2019 Ficha Braum L955 Millennium Series
37/43
8/12/2019 Ficha Braum L955 Millennium Series
38/43
Page 36
Maintenance is necessary toensure safe and trouble-free liftoperation. General preventivemaintenance consisting ofinspections of your lift system andcleaning the lift should be a partof your routine.
The L955 has been designed withmany self-lubricating compo-nents. Lubricate the pivot pointsspecified on page 37 approxi-mately every four weeks (or 100cycles) with a light penetratingtype oil (30 weight or equivalent).Severe conditions (weather,environment, heavy usage, etc.)may require more frequentlubrication.
Preventive maintenance visualinspections and lubricationprocedures do nottake the place
of the procedures specified in theMaintenance and LubricationSchedule provided in the appli-cable lift installation and servicemanual. The procedures outlinedin the Maintenance and Lubrica-tion Schedule must be per-formed at the recommendedscheduled intervals by anauthorized Braun Corporationservice representative who hasattended and been certified byThe Braun Corporation Salesand Service School.
If the scheduled maintenance andlubrication procedures are notbeing performed, or if there is anysign of lift damage, wear, abnor-mal condition or improper opera-tion, discontinue lift use imme-diately. Contact your salesrepresentative or call The Braun
Corporation at 1-800-THE LIFT.One of our national ProductSupport representatives will directyou to an authorized servicetechnician who will inspect yourlift.
Maintenance and Lubrication
WARNING
Maintenance andlubrication proce-dures must be per-formed by authorizedservice personnel asspecified in theapplicable installa-tion/service manual.Failure to do so mayresult in seriousbodily injury and/orproperty damage.
Bridge Plate
8/12/2019 Ficha Braum L955 Millennium Series
39/43
THEBRAUNCORPORATION
P.O.BOX310WINAMAC
IN46996
219-946
-6153
1099
DOM
SERIALNUMBER
MODELL95 5
U3 14248
01.0133.28. 14C
B
PATENT
TM
Page 37
Roll Stop Latch
(pivot and slide points)
Platform Pivot Pin(2 places)
Platform Fold Axles(2 places)
Rotating PivotSlide Arm Pivot Pins(2 places - behind cover)
Maintenance and Lubrication
Note: LPS2 GeneralPurpose Penetrating Oilis available in elevenounce aerosol cans from
The Braun Corporation(part number 15807).
Side Entry Roll StopHinge (4 places)
Bridge PlatePivot Points(2 places)
Note: Clean lubricationpoints beforeapplyinglubricants.
Note: Disregard referencesto components not present.
8/12/2019 Ficha Braum L955 Millennium Series
40/43
OWNER'S WARRANTY REGISTRATION
PURCHASEDFROM
DATEINSTALLED
NAME
ADDRESS
CITY
TELEPHONE
TO VALIDATE WARRANTYREGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION.
OWNER
STATE ZIP
Page 38
Warranty and Registration Instructions
Sample Warranty/Registration Card
Serial No.Model No. Cylinder Code
Series No. Pump Code
Immediately upon receiving yourlift, examine the unit for anydamage. Notify the carrier atonce with any claims.
Two warranty/registration cards(shown below) are located in thelift-mounted owners manualstorage pouch. The sales repre-sentative must process one of the
located on the opposite pumpside tower. This I.D. tag containsthe product identification informa-tion provided on the Warranty/
Registration card. Record theinformation in the space providedon the next page. This informa-tion must be provided whenfiling a warranty claim orordering parts.
cards. The consumer must fill outthe other card and mail it to TheBraun Corporation. The warrantyis provided on the back cover of
this manual. The warranty cardsmust be processed to activatethe warranty.
The Braun Serial No./Series No.identification tag (shown below) is
L955SE314248-A4-04293-35-14CF
The Braun CorporationPO Box 310
Winamac, IN 46996
(574) 946-6153
LIFT MODEL #
L955SE314248
A4-04293
35 14CF
1/12/2003
SERIAL NUMBER
MFG DATE
PATENTS PENDING-5,261,779-5,806,632
PUMP CODE CYLINDER
Sample Serial No./Series No. Identification Tag
8/12/2019 Ficha Braum L955 Millennium Series
41/43
Page 39
Warranty and Registration Instructions
Model No.
Series No.
Serial No.
Pump Code
Cylinder Code
Date of Manufacture
Note: Retain this informationfor future use. You must havethis information when filing a
warranty claim or ordering
8/12/2019 Ficha Braum L955 Millennium Series
42/43
"Providing Access to the World"
Over 300 Braun
Dealers Worldwide
8/12/2019 Ficha Braum L955 Millennium Series
43/43
Top Related