External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
1/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
133527 A2C AIR COSTCONTROL
RUE DUCOMMANDANT
COUSTEAU
LISLE JOURDAIN 32600 France N/A 07 Electrical 07-06 Identification ofconnectors
Laser wire and cablemarking by Ultra
Violet UV process
AIPS07-06-001 Laser wire and cablemarking by Ultra
Violet UV process
4 AIPI07-06-001 Lser wire and cablemarking by ultra
violet UV process
A1 Yes QUALIFIED 15/06/2018 10:55:50 02/08/2017 09:39:43
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
14 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED 19/07/2019 09:49:43 16/01/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 AIPI01-02-017 General assemblyand installation of
fasteners
3 Yes QUALIFIED 19/07/2019 09:49:43 28/07/2014 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
AIPS01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
5 AIPI01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
A4 Yes QUALIFIED 19/07/2019 09:49:43 26/02/2016 20:18:06
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
AIPS01-02-005 Preparation of Holesin Plastic and Mixed
PlasticMetalAssemblies for
Fastening
11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and
mixed FRPMETALassemblies for
fastening
A4 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:43 Drilling on polyacetaland mixed
(polyacetal / Metal)assemblies
13/02/2017 16:09:27
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
AIPS01-02-003 Preparation of Holesin Metallic Materials
for Fastening
8 AIPI01-02-003 Preparation of holesin metallic materials
for fastening
A1 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:43 Only for manual,semi-auto and
automatic drilling
28/07/2014 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Generalrequirements for
welding and alliedprocesses
AIPS01-04-001 Generalrequirements for
welding and alliedprocesses
4 NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:44 27/02/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Resistance welding AIPS01-04-004 Resistance Welding 5 AIPI01-04-004 RESISTANCEWELDING SPOT
AND SEAMWELDING
A2 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:44 ONLY ON TITANIUMPARTS, SPOT
WELDING DEGRE BAND C; RANGE
0.4:0.4 TO 3.2:3.2
27/02/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Tungsten Inert Gaswelding of metallic
materials
ADET0262 REPAIR ORREWORK OF
SHEET METALPARTS BY MANUAL
TIG WELDING
B AIPI01-04-008 TUNGSTEN INERTGAS WELDING
A1 Yes QUALIFIED 19/07/2019 09:49:44 08/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Tungsten Inert Gaswelding of metallic
materials
AIPS01-04-008 Tungsten Inert GasTIG Welding of
Metallic Materials
5 AIPI01-04-008 TUNGSTEN INERTGAS WELDING
A1 Yes QUALIFIED 19/07/2019 09:49:44 08/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
03-09 Cutting ofmetals
Laser cutting of steel,titanium and nickel
alloys
AIPS03-09-001 Laser cutting of steel,titanium and nickel
alloys
5 AIPI03-09-001 LASER CUTTINGOF STEEL,
TITANIUM, ANDNICKEL ALLOYS
2 Yes QUALIFIED WITHLIMITATIONS
29/07/2019 11:10:13 Titanium thicknessrange: 0.8mm ; 1
mm; 1,27 mm;1,4mm; 1,6 mm to3,2 mm and 5 mm
03/03/2016 16:37:58
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
03-10 Straighteningof metals
Super plastic formingof aluminium alloys
ADET0064 Aluminium alloyssuperplastic forming
C NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:42 CLASSEFONCTIONNELLE2 S ET 3 + PIÈCEF531 20072 200
27/03/2012 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
03-10 Straighteningof metals
Super plastic formingof titanium alloys
ADET0161 Superplastic formingof titanium alloys
C NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:42 27/08/2008 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
03-10 Straighteningof metals
Super plastic formingof titanium alloys
AIPS03-10-008 Superplastic Formingof Titanium Alloys
7 AIPI03-10-008 Superplastic formingof titanium alloys
A2 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:43 Limited to: - partsclass 2.3 & 3 withstrain class A or B
- parts class2.1 & 2.2 with strain
class A
QCS180600 issue 1 ManufacturingProcess Qualified for
FC 2.2 regardi
Corresponds toQualification
extension of ACBcompany Id 133961to get Manufacturing
Process Qualifi
22/09/2011 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 AIPI05-02-003 Application ofexternal paint
systems
2 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:42 limitation on varnishapplication
21/04/2017 10:46:57
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of nonhardening jointing
compounds
AIPS05-05-006 Application of nonhardening jointing
compounds
4 AIPI05-05-006 APPLICATION OFNON HARDENING
JOINTINGCOMPOUNDS
A3 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:44:56
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
7 AIPI05-05-001 SEALING OFAIRCRAFT
STRUCTURE
A4 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:45 ONLY USE FORRIVETING
PROCESS / ONLYINTERPOSITION
11/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 AIPI05-05-004 Wet installation offasteners
A4 Yes QUALIFIED WITHLIMITATIONS
19/07/2019 09:49:45 ONLY USE FORRIVETINGPROCESS
11/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
2 AIPI06-01-004 MECHANICALSURFACE
PREPARATION OFNON-STRUCTURALADHEREND PRIOR
TO ADHESIVEBONDING
A2 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:26:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-01 Pre-treatment Surface preparationof adherends forsilicone based
ahesives sealants
AIPS06-01-008 Surface preparationofl adherends for
silicone basedahesives sealants
1 AIPI06-01-008 Surface preparationof adherends forsilicone based
adhesivessealants
1 Yes QUALIFIED 19/07/2019 09:49:45 23/12/2016 10:08:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A3 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:34:05
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A Non DestructiveTesting
AITM6-9 DirectReading
ElectricalConductivity
EN2004-1 ElectricalConductivity
NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:44 06/03/2018 12:57:23
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A TBD TBD Linear FrictionWelding
AIPS01-04-019 Linear FrictionWelding for Titanium
Alloys
4 NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:43 17/05/2016 15:21:32
134349 ADEL WIGGINSGROUP
TRANSDIGM INC
5000 TRIGGSSTREET
LOS ANGELES 90022 USA N/A Non DestructiveTesting
AITM6-0Measurement
Measure ResistanceOf Electrical Bonding
Points
AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
4 AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
3 Yes QUALIFIED WITHLIMITATIONS
17/06/2019 08:40:06 Two pointmeasurement
method - M9 with500VDC measuring
Current andcalculation of
resistence (methodenforced by Airbus
Soecification
20/05/2019 12:35:51
134656 SAFRANAEROSYSTEMS
4 RUE LESAGEMAILLE
CAUDEBEC LESELBEUF
76320 France N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening ADET0030 Structural bolttightening torques
P IPDA71-03 APPL COUPLESERRAGE
BOULONNERIESTRUCTUR
A2 Yes QUALIFIED WITHLIMITATIONS
28/11/2018 13:57:47 Limitation to de-icingsystem
08/03/2017 11:27:05
134656 SAFRANAEROSYSTEMS
4 RUE LESAGEMAILLE
CAUDEBEC LESELBEUF
76320 France N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
ADET0082 Application ofsealants
M IPDA77-01 DEFROSTING -APPLICATION OF
SEALANTS
A6 Yes QUALIFIED WITHLIMITATIONS
28/11/2018 13:57:48 Limitation to de-icingsystem
08/03/2017 11:35:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
7 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
7 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
14 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED 05/09/2018 16:10:09 28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 AIPI01-02-017 General assemblyand installation of
fasteners
3 Yes QUALIFIED 05/09/2018 16:10:09 15/01/2018 08:57:06
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1067 RIVETING WITHBLIND RIVETS
3 ABP2-1067 RIVETING WITHBLIND RIVETS
3 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-2077 MANUALFASTENING WITH
BLIND BOLTSCOMPOSI-LOK
1 ABP2-2077 MANUALFASTENING WITH
BLIND BOLTSCOMPOSI-LOK
1 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
2/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
AIPS01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
5 AIPI01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
A4 Yes QUALIFIED 05/09/2018 16:10:09 24/03/2015 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
ABP2-2075 MANUALFASTENING WITHSHORT THREAD
POINT DRIVEBOLTS
8 ABP2-2075 MANUALFASTENING WITHSHORT THREAD
POINT DRIVEBOLTS
8 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
AIPS01-02-022 Installation of parallelshank threaded
fasteners
4 AIPI01-02-022 INSTALLINGTHREADED
CYLINDRICALFASTENERS
A2 Yes QUALIFIED 05/09/2018 16:10:10 13/03/2018 08:38:52
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
ABP6-2183 MACHININGCOMPOSITES
2-2 ABP6-2183 MACHININGCOMPOSITES
2-2 Yes QUALIFIED 05/09/2018 16:10:08 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
AIPS01-02-005 Preparation of Holesin Plastic and Mixed
PlasticMetalAssemblies for
Fastening
11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and
mixed FRPMETALassemblies for
fastening
A4 Yes QUALIFIED 05/09/2018 16:10:09 27/10/2016 10:24:40
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-03 Inserts,Locking
Installation of metallicinserts acres sleeves
ABP2-3095 INSTALLINGMETALLIC INSERTS
ACRES SLEEVES
2 ABP2-3095 INSTALLINGMETALLIC INSERTS
ACRES SLEEVES
2 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-03 Inserts,Locking
Installation of metallicinserts acres sleeves
AIPS01-03-005 Installation of metallicinserts Acres sleeves
5 AIPI01-03-005 Installation of metallicinserts Acres sleeves
2 Yes QUALIFIED 12/12/2019 11:56:17 05/01/2016 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-03 Inserts,Locking
Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
3 ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
3 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
01-03 Inserts,Locking
Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
5 AIPI01-03-002 Manual fastening of2- or 4- start quickrelease fasternerswith oder without
acres sleeves
1 Yes QUALIFIED 12/12/2019 11:49:22 05/01/2016 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
ABP6-2185 MANUFACTURE OFCARBON-FIBRE
EPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 ABP6-2185 MANUFACTURE OFCARBON-FIBRE
EPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 Yes QUALIFIED WITHLIMITATIONS
05/09/2018 16:10:08 ADDITION OFAUTHORISATION
TO PROCEED FORHONEYCOMB
FORMING FORSINGLE AISLE FLAP
TRACK FAIRINGSWORK PACKAGEREF: TS/AD/262PENDING FIRST
ARTICLEACCEPTANCE
19/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND
ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND
ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 Yes QUALIFIED 05/09/2018 16:10:08 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
AIPS03-02-018 Manufacture ofStructural Sandwich
Parts withThermosetting Fiber
Reinforced Skins
7 AIPI03-02-018 Manufacture ofStructural Sandwich
Parts withThermosetting Fiber
Reinforced Skins
A3 Yes QUALIFIED 05/09/2018 16:10:10 30/07/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-02 Compositestructural, non-
metallic
Manufacturing ofCFRP and GFRP
with thermosetprepreg material
AIPS03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg
Materials
11 AIPI03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg
Materials
A3 Yes QUALIFIED 05/09/2018 16:12:26 20/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-07 Composites,non-structural
Machining of fibrereinforced plasticFRP components
AIPS03-07-002 Machining of fibrereinforced plasticFRP components
7 AIPI03-07-002 Machining of FibreReinforced PlasticFRP Components
A2 Yes QUALIFIED WITHLIMITATIONS
05/09/2018 16:12:26 ONLYMONOLYTHICCOMPOSITES
19/06/2013 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
03-08 Rework ofComposites
Rework of StructuresManufactured from
Composite MaterialsLaminates and
Sandwich
AIPS03-08-003 Rework of StructuresManufactured from
Composite MaterialsLaminates and
Sandwich
5 AIPI03-08-003 Rework of structuresmanufactured fromcomposite materials
laminates andsandwich
A4 Yes QUALIFIED WITHLIMITATIONS
05/09/2018 16:12:26 FOR REPAIRSAUTHORISED BY
CONCESSION ANDREWORK AS PER
AIPI 03-08-003
08/06/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-01 Primer Application of basicprimer
ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
25 ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
25 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application of anti-erosion paint
ABP4-2133 APPLICATION OFEROSION
RESISTANT PAINT
7 ABP4-2133 APPLICATION OFEROSION
RESISTANT PAINT
7 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application of anti-static paints oncomposite parts
ABP4-2125 Application of anti-static paints to
composites excludingcarbon fibre
1 ABP4-2125 Application of anti-static paints to
composites excludingcarbon fibre
1 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
ABP4-1121 APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
4 ABP4-1121 APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
4 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2364 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATE-FREE
PRIMER TO ANEXTERNALSURFACE
8 ABP4-2364 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATE-FREE
PRIMER TO ANEXTERNALSURFACE
8 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 AIPI05-02-003 Application ofexternal paint
systems
2 Yes QUALIFIED 05/09/2018 16:12:26 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
ABP4-3135 APPLICATION OFFILLER TO SMALL
HOLES
6 ABP4-3135 APPLICATION OFFILLER TO SMALL
HOLES
6 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
ABP4-3350 APPLICATION OFPINHOLE FILLER
2 ABP4-3350 APPLICATION OFPINHOLE FILLER
2 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
3/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
AIPS05-02-009 Application ofstructural paints
5 AIPI05-02-009 APPLICATION OFSTRUCTURAL
PAINTS
A3 Yes QUALIFIED 05/09/2018 16:12:26 27/07/2011 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Rework of paints onmetallic and
nonmetallic structuralparts
AIPS05-02-011 Rework of paints onmetallic and non-metallic structural
parts
5 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural
parts
2 Yes QUALIFIED 05/09/2018 16:12:26 08/04/2011 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of lowadhesion sealants
ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of nonhardening jointing
compounds
ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
AIPS05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
2 AIPI05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
A4 Yes QUALIFIED 19/12/2018 09:05:44 20/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Process for themanufature of form-in-place seals using
sealants
ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 Yes QUALIFIED 05/09/2018 16:10:08 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Process for themanufature of form-in-place seals using
sealants
AIPS05-05-005 Process for themanufacture of form-in-place seals using
sealant
3 AIPI05-05-005 Process for themanufacture of form-in-place seals using
sealant
A2 Yes QUALIFIED 20/12/2018 15:24:11 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
ABP4-3329 APPPLICATION OFAERODYNAMIC
FILLER SEALANT
4 ABP4-3329 APPPLICATION OFAERODYNAMIC
FILLER SEALANT
4 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
7 AIPI05-05-001 SEALING OFAIRCRAFT
STRUCTURE
A4 Yes QUALIFIED 05/09/2018 16:12:26 19/12/2017 14:29:59
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Surface protection offasteners andsealants by
application of varnish
AIPS05-05-003 Surface protection offasteners andsealants by
application of varnish
3 AIPI05-05-003 Surface protection offasteners andsealants by
application of varnish
A5 Yes QUALIFIED 20/12/2018 15:24:11 28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 AIPI05-05-004 Wet installation offasteners
A4 Yes QUALIFIED 21/11/2018 15:15:57 06/12/2017 09:49:36
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
2 AIPI06-01-004 MECHANICALSURFACE
PREPARATION OFNON-STRUCTURALADHEREND PRIOR
TO ADHESIVEBONDING
A2 Yes QUALIFIED 21/11/2018 18:49:19 19/11/2018 18:15:43
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-01 Pre-treatment Surface preparationfor thermosetting
parts beforestructural bonding
AIPS06-01-003 Surface Preparationfor Thermosetting
parts beforestructural bonding
5 AIPI06-01-003 Surface preparationfor thermosetting
parts beforestructural bonding
A3 Yes QUALIFIED 22/01/2019 09:18:34 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 Yes QUALIFIED 22/01/2019 09:19:31 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 Yes QUALIFIED 22/01/2019 09:21:33 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 Yes QUALIFIED 22/01/2019 09:20:25 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1162 ADHESIVEBONDING WITH
TWO PARTACRYLIC
11 ABP5-1162 ADHESIVEBONDING WITH
TWO PARTACRYLIC
11 Yes QUALIFIED 22/01/2019 09:23:46 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES
2 ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES
2 Yes QUALIFIED 22/01/2019 09:25:00 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A3 Yes QUALIFIED 21/11/2018 18:50:32 02/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED WITHLIMITATIONS
05/09/2018 16:10:09 LIMITED ASDEFINED IN BVTI
ACT/AB TECH 0034ISSUE 8, AC/AB
TECH 0040 ISSUE 6& AC/AB TECH 0043
ISSUE 1.
26/02/2018 12:18:31
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED 05/09/2018 16:10:09 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS
20/12/2018 15:24:10 LIMITATION FORASSEMBLY
PROCESS 12, SPMETHOD 11, FPMETHOD 3 AND
BONDING CLASS 3
28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 09 Cleaning, De-oxidation, Pickling,Chemical Coating
09-04 Masking Surface preparationprior to external paint
application
AIPS09-04-001 Surface preparationprior to external paint
application
2 AIPI09-04-001 Surface preparationprior to external paint
application
2 Yes QUALIFIED 20/12/2018 15:24:10 10/12/2013 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-0Measurement
Measure ResistanceOf Electrical Bonding
Points
AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
4 AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
3 Yes QUALIFIED WITHLIMITATIONS
21/11/2018 18:51:45 LIMITATION TOTEST METHOD # 1
28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-0 NDI generic Non DestructiveInspection of
Composite Parts
ABP6-5233 TESTINGCOMPOSITES BY
ULTRASONIC FLAWDETECTION
6 ABP6-5233 TESTINGCOMPOSITES BY
ULTRASONIC FLAWDETECTION
6 Yes QUALIFIED 05/09/2018 16:10:09 05/06/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-4 Ultrasonic Throughtransmission
ultrasonic inspectionof CFRP and
sandwich
AITM6-4002 Ultrasonic throughtransmission
Inspection of fibrecomposite
7 AITM6-4002 Ultrasonic throughtransmission
Inspection of fibrecomposite
7 Yes QUALIFIED 21/12/2018 12:55:54 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-4 Ultrasonic Ultrasonic pulse echoinspection of CFRP
AITM6-4005 Ultrasonic pulse-echo inspection of
carbon fibre plastics
11 AITM6-4005 Ultrasonic pulse-echo inspection of
carbon fibre plastics
10 Yes QUALIFIED 21/11/2018 16:11:05 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-4 Ultrasonic Ultrasonic pulse-echo inspection of
areas aroundfastener and rivet
holes in composites
AITM6-4022 Ultrasonic pulse-echo inspection of
areas aroundfastener and rivet
holes in composites
3 AITM6-4022 Ultrasonic pulse-echo inspection of
areas aroundfastener and rivet
holes in composites
3 Yes QUALIFIED 21/12/2018 12:55:54 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
AITM6-4 Ultrasonic Ultrasonic testing ofmetallic materials
plates, bars,extrusions and
blanks
ABP0-2017 SUPPLY OFALUMINIUM PLATEWITH ULTRASONICFLAW DETECTION
2 NA Yes QUALIFIED 05/09/2018 16:10:03 14/12/2009 00:00:00
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
4/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening 80-T-34-3050 Tightening of Screwsand Nuts
80-T-34-3050 Tightening of Screwsand Nuts
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
7 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
7 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
14 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED WITHLIMITATIONS
15/10/2018 11:30:34 Manual Tighteningonly
10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
80-T-34-3001 Installation ofFasteners and Nuts
80-T-34-3001 Installation ofFasteners and Nuts
Yes QUALIFIED 04/04/2017 12:14:40 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 AIPI01-02-017 General assemblyand installation of
fasteners
3 Yes QUALIFIED 26/07/2018 15:08:41 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind
Bolts
80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind
Bolts
Yes QUALIFIED 26/03/2015 00:00:00 230.00 90.00 80.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1065 RIVETING WITHBLIND NUT PLATE
RIVETS
2 ABP2-1065 RIVETING WITHBLIND NUT PLATE
RIVETS
2 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1066 RIVETING WITHBLIND STEM LOCK
RIVETS AVDEL
1 ABP2-1066 RIVETING WITHBLIND STEM LOCK
RIVETS AVDEL
1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1067 RIVETING WITHBLIND RIVETS
3 ABP2-1067 RIVETING WITHBLIND RIVETS
3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1068 RIVETING WITHBLIND RIVETS
CHOBERT
1 ABP2-1068 RIVETING WITHBLIND RIVETS
CHOBERT
1 Yes QUALIFIED 30/11/2009 00:00:00 230.00 90.00 80.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
AIPS01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
5 AIPI01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
A4 Yes QUALIFIED WITHLIMITATIONS
27/11/2019 09:28:40 Rivets only. Plasticsand AluminumAssemblies.
28/10/2019 12:07:57
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation ofbushes, shrink and
press fit
ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER
FASTENING PARTS
2 ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER
FASTENING PARTS
2 Yes QUALIFIED 30/11/2009 00:00:00 230.00 90.00 80.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
AIPS01-02-022 Installation of parallelshank threaded
fasteners
4 AIPI01-02-022 INSTALLINGTHREADED
CYLINDRICALFASTENERS
A2 Yes QUALIFIED 16/09/2019 10:40:23 12/10/2018 15:16:52
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw
Holes
80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw
Holes
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
AIPS01-02-005 Preparation of Holesin Plastic and Mixed
PlasticMetalAssemblies for
Fastening
11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and
mixed FRPMETALassemblies for
fastening
A4 Yes AUTHORISATIONTO PROCEED WITH
LIMITATIONS
2020-03-31 27/11/2019 09:30:53 Manual Drilling Only 08/11/2019 10:20:32
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
ABP2-3097 PREPARATION OFCOUNTERSUNK
HOLES INMETALLIC
MATERIALS FORFASTENING AND
RIVETING
1 ABP2-3097 PREPARATION OFCOUNTERSUNK
HOLES INMETALLIC
MATERIALS FORFASTENING AND
RIVETING
1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
ABP6-3205 FABRICATION ANDDEBURRING OF
HOLES INMETALLIC
MATERIALS
1 ABP6-3205 FABRICATION ANDDEBURRING OF
HOLES INMETALLIC
MATERIALS
1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
AIPS01-02-003 Preparation of Holesin Metallic Materials
for Fastening
8 AIPI01-02-003 Preparation of holesin metallic materials
for fastening
A1 Yes QUALIFIED 20/09/2018 16:27:52 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-03 Inserts,Locking
Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
3 ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-03 Inserts,Locking
Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
5 AIPI01-03-002 Manual fastening of2- or 4- start quickrelease fasternerswith oder without
acres sleeves
1 Yes QUALIFIED 16/09/2019 10:39:21 12/10/2018 15:36:30
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Brazing of MetallicMaterials
ABP2-4099 APPROVAL OFWELDING AND
BRAZINGOPERATORS
9 ABP2-4099 APPROVAL OFWELDING AND
BRAZINGOPERATORS
9 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Brazing of MetallicMaterials
ABP2-4105 MANUAL BRAZINGOF STEELS
COPPER ANDNICKEL ALLOYS
3 ABP2-4105 MANUAL BRAZINGOF STEELS
COPPER ANDNICKEL ALLOYS
3 Yes QUALIFIED 30/11/2009 00:00:00 0.00 0.00 0.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Brazing of MetallicMaterials
ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON
ROD
6 ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON
ROD
6 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Generalrequirements for
welding and alliedprocesses
80-T-34-6620 Inert Gas FusionWelding TIG
80-T-34-6620 Inert Gas FusionWelding TIG
Yes QUALIFIED 10/04/2018 16:07:02 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Plasma Arc Weldingof Metallic Materials
ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT
GAS T.I.G.PLASMA ARC
WELDING P.A.W.PROCESSES
4 ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT
GAS T.I.G.PLASMA ARC
WELDING P.A.W.PROCESSES
4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
01-04 Weldling,Brazing, Soldering
Tungsten Inert Gaswelding of metallic
materials
ABP2-4102 TUNGSTEN INERTGAS TIG WELDING
8 ABP2-4102 TUNGSTEN INERTGAS TIG WELDING
8 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
02-01 Anodizing Tartaric sulfuricanodising of
aluminium alloys forcorrosion protection
and paintpretreatment
AIPS02-01-003 Tartaric SulphuricAnodising of
aluminium alloys forcorrosion protection
and paintpretreatment.
2 AIPI02-01-003 Tartaric SulphuricAnodizing of
aluminium alloysTSA
A3 Yes QUALIFIED WITHLIMITATIONS
03/08/2018 11:25:21 PAINTED PARTSONLY
17/06/2016 11:59:35
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
Yes QUALIFIED WITHLIMITATIONS
10/04/2018 16:18:26 QUALIFIED ONLYFOR USE OF
ALODINE PEN FORREWORK
25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
80-T-35-9124 Repair of PaintCoatings on Metallic
and Non-MetallicSurfaces
80-T-35-9124 Repair of PaintCoatings on Metallic
and Non-MetallicSurfaces
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 Yes QUALIFIED WITHLIMITATIONS
LIMITED TOIMMERSION AND
BRUSH/SWAB,METHOD 1 AND 2
ONLY.
06/06/2018 13:53:46
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
5/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
AIPS02-05-001 Chemical conversioncoating
3 AIPI02-05-001 Chemical conversioncoating
2 Yes QUALIFIED WITHLIMITATIONS
06/06/2018 14:26:25 IMMERSIONPROCESS ONLY.
17/01/2018 12:02:16
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication
03-03 Fabrication,bearings, swaging
Rework of scratchesin Aluminium alloyson external surfaces
80-T-39-0230 Treatment ofDamage on
Components Made ofAluminium-Alloy
80-T-39-0230 Treatment ofDamage on
Components Made ofAluminium-Alloy
Yes QUALIFIED 10/04/2018 16:21:01 26/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication
03-03 Fabrication,bearings, swaging
Rework of scratchesin Aluminium alloyson external surfaces
AIPS03-03-001 Rework of scratchesin Aluminium alloyson external surfaces
5 AIPI03-03-001 Rework of scratchesin aluminium and
aluminium alloys onexternal surfaces
2 Yes QUALIFIED 16/09/2019 10:41:49 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication
03-06 Installation Installation of AnchorNuts
80-T-34-3000 Installation of AnchorNuts
80-T-34-3000 Installation of AnchorNuts
Yes QUALIFIED 04/04/2017 12:20:56 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys
Heat treatment ofaluminium alloy parts
80-T-36-1010 Heat Treatment ofAluminium
80-T-36-1010 Heat Treatment ofAluminium
Yes QUALIFIED 12/04/2018 12:47:46 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys
Heat treatment ofaluminium alloy parts
ABP3-1119 HEAT TREATMENTOF ALUMINIUM
9 ABP3-1119 HEAT TREATMENTOF ALUMINIUM
9 Yes QUALIFIED 30/11/2009 00:00:00 1.00 0.01 1.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys
Heat treatment ofaluminium alloy parts
ABP3-1120 REFRIGERATEDSTORAGE OF
ALUMINIUM AFTERHEAT TREATMENT
1-3 ABP3-1120 REFRIGERATEDSTORAGE OF
ALUMINIUM AFTERHEAT TREATMENT
1-3 Yes QUALIFIED 14/11/2018 09:32:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys
Heat treatment ofaluminium alloy parts
AIPS04-01-001 Heat treatment ofaluminium alloys
parts
5 AIPI04-01-001 Heat Treatment ofAluminium Alloy
Parts
A3 Yes QUALIFIED 26/07/2018 09:46:36 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys
Heat treatment ofsolid rivets
ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR
TO RIVETING
2 ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR
TO RIVETING
2 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-01 Primer Application of basicprimer
ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
25 ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
25 Yes QUALIFIED 28/09/2012 00:00:00 28/09/2012 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application of anti-static paints oncomposite parts
80-T-35-9120 Coating with Paintsand Varnishes,
General
80-T-35-9120 Coating with Paintsand Varnishes,
General
Yes QUALIFIED 10/04/2018 16:12:25 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
80-T-35-5218 Application of ElasticProtective Coatings
80-T-35-5218 Application of ElasticProtective Coatings
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 Yes QUALIFIED 30/11/2009 00:00:00 1000.00 1200.00 300.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
ABP4-2128 APPLICATION OFPOLYURETHANE
PAINTS ANDVARNISHES FOR
OVERCOATING OFSEALANTS AND
PART MARKINGSAND FOR
IDENTIFICATIONPURPOSES
11 ABP4-2128 APPLICATION OFPOLYURETHANE
PAINTS ANDVARNISHES FOR
OVERCOATING OFSEALANTS AND
PART MARKINGSAND FOR
IDENTIFICATIONPURPOSES
11 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 AIPI05-02-003 Application ofexternal paint
systems
2 Yes QUALIFIED WITHLIMITATIONS
25/10/2019 12:58:05 ABRASIONRESISTANT PAINTON NON VISIBLEDETAIL PARTS,
WHEN AIRCRAFTON THE GROUND
12/10/2018 14:41:45
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
ABP4-2131 APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
3 ABP4-2131 APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
80-T-35-5030 Coating withTwoThree-
component Water-based Primer
80-T-35-5030 Coating withTwoThree-
component Water-based Primer
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
80-T-35-5130 Coating withTwoThree-
component Water-based Top Coat
80-T-35-5130 Coating withTwoThree-
component Water-based Top Coat
Yes QUALIFIED 26/03/2015 00:00:00 500.00 230.00 120.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
AIPS05-02-009 Application ofstructural paints
5 AIPI05-02-009 APPLICATION OFSTRUCTURAL
PAINTS
A3 Yes QUALIFIED 26/07/2018 15:19:59 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Rework of paints onmetallic and
nonmetallic structuralparts
AIPS05-02-011 Rework of paints onmetallic and non-metallic structural
parts
5 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural
parts
2 Yes QUALIFIED 25/09/2018 16:29:54 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of lowadhesion sealants
ABP4-5141 APPLICATION OFSEALANT FOR
INTEGRAL FUELTANKS
16 ABP4-5141 APPLICATION OFSEALANT FOR
INTEGRAL FUELTANKS
16 Yes QUALIFIED 02/08/2018 15:09:32 12/04/2018 15:47:57
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of lowadhesion sealants
ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes QUALIFIED 30/11/2009 00:00:00 1200.00 2500.00 800.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of nonhardening jointing
compounds
80-T-35-5903 Assembly withDuroplastic Anti-
corrosive Compound,Zink Chromate
Based
80-T-35-5903 Assembly withDuroplastic Anti-
corrosive Compound,Zink Chromate
Based
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Application of nonhardening jointing
compounds
ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Process for themanufature of form-in-place seals using
sealants
ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 Yes QUALIFIED 03/08/2018 11:25:21 07/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
80-T-34-9600 Application ofSealing Compounds
80-T-34-9600 Application ofSealing Compounds
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
7 AIPI05-05-001 SEALING OFAIRCRAFT
STRUCTURE
A4 Yes QUALIFIED WITHLIMITATIONS
21/11/2018 11:15:28 No qualification forfreezing and
defreezing process.
10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Surface protection offasteners andsealants by
application of varnish
AIPS05-05-003 Surface protection offasteners andsealants by
application of varnish
3 AIPI05-05-003 Surface protection offasteners andsealants by
application of varnish
A5 Yes QUALIFIED 21/11/2018 11:15:28 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Wet installation offasteners
80-T-34-5803 Wet Installation ofFasteners
80-T-34-5803 Wet Installation ofFasteners
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05-05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 AIPI05-05-004 Wet installation offasteners
A4 Yes QUALIFIED WITHLIMITATIONS
21/11/2018 11:15:28 No qualification forfreezing and
defreezing process.
10/06/2013 00:00:00
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
6/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-01 Pre-treatment Etching offluorpolymer
adherends prior toadhesive bonding
ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING
1 ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING
1 Yes QUALIFIED 30/11/2009 00:00:00 600.00 2700.00 750.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
2 AIPI06-01-004 MECHANICALSURFACE
PREPARATION OFNON-STRUCTURALADHEREND PRIOR
TO ADHESIVEBONDING
A2 Yes QUALIFIED 26/07/2018 09:55:40 15/09/2017 11:36:30
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
80-T-34-9032 Bonding of Non-structural
Connections
80-T-34-9032 Bonding of Non-structural
Connections
Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A3 Yes QUALIFIED 16/09/2019 10:38:09 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding 80-T-40-3312 Electrical bonding 80-T-40-3312 Electrical bonding Yes QUALIFIED 26/03/2015 00:00:00 500.00 230.00 120.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED WITHLIMITATIONS
17/12/2018 15:20:12 LIMITED TO PARTSAND PROCESS
REFERENCED INBVTI AFBT 001
ISSUE 3.
08/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED WITHLIMITATIONS
03/08/2018 11:25:21 LIMITED TO PARTSAND PROCESS
REFERENCED INBVTI AFBT 001
ISSUE 3.
09/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS
21/11/2018 15:17:11 LIMITED TOMethods SP1, SP2,SP7, SP8, 2a/2b, 7,
FP2 and FP3
28/01/2014 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-0Measurement
Determination ofelectrical conductivityof non-ferromagnetic
materials
ABP6-5224 TESTING OFALUMINIUMALLOYS BY
ELECTRICALCONDUCTIVITY
5 ABP6-5224 TESTING OFALUMINIUMALLOYS BY
ELECTRICALCONDUCTIVITY
4 Yes QUALIFIED 30/11/2009 00:00:00 UK UK 895.00 1796.00 1200.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-0Measurement
Measure ResistanceOf Electrical Bonding
Points
AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
4 AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
3 Yes QUALIFIED WITHLIMITATIONS
12/10/2018 15:50:57 LIMITED TOMETHOD 1 and 2
04/04/2014 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-1 Penetrant Penetrant testing ABP6-5230 TESTING BYPENETRANT FLAW
DETECTION
12 ABP6-5230 TESTING BYPENETRANT FLAW
DETECTION
12 Yes QUALIFIED WITHLIMITATIONS
22/05/2019 10:10:57 sensitivity 2penetrant and
aluminium 2000,6000, 7000 series
(when etching step isperformed)
09/08/2017 11:51:38
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-1 Penetrant Penetrant testing AITM6-1001 Penetrant Testing 12 AITM6-1001 Penetrant Testing 10 Yes QUALIFIED WITHLIMITATIONS
22/05/2019 10:12:01 sensitivity 2penetrant and
aluminium 2000,6000, 7000 series
(when etching step isperformed)
07/07/2017 11:40:42
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-9 Conductivity Inspection forconfirmation of
anodising process
AITM6-9004 Inspection forconfirmation of theanodising process
based uponmeasurement of
surface resistance
2 AITM6-9004 Inspection forconfirmation of theanodising process
based uponmeasurement of
surface resistance
2 Yes QUALIFIED 22/05/2019 11:43:57 17/06/2016 12:06:05
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-9 DirectReading
Coating thicknessmeasurement
AITM6-6006 Measuring coatingthickness by
equipments of themagnetic and eddy
current type
3 AITM6-6006 Measuring coatingthickness by
equipments of themagnetic and eddy
current type
3 Yes QUALIFIED 22/05/2019 11:40:25 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
AITM6-9 DirectReading
Determination ofelectrical conductivityof non-ferromagnetic
materials
AITM6-6004 For InspectionProcesses
Determination ofelectrical conductivityof aluminium alloys
by Eddy currentmethod
5 AITM6-6004 For InspectionProcesses
Determination ofelectrical conductivityof aluminium alloys
by Eddy currentmethod
3 Yes QUALIFIED 12/04/2018 13:00:56 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A TBD TBD DEOXIDATION OFALUMINIUM
ALLOYS
ABP8-1296 DEOXIDATION OFALUMINIUM
ALLOYS
7 ABP8-1296 DEOXIDATION OFALUMINIUM
ALLOYS
7 Yes QUALIFIED 22/05/2019 10:03:41 06/06/2018 14:09:04
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
02 SurfaceTreatments
02-02 Shot Peening,surface
improvement,blasting, cold
expansion
Dry blasting 80-T-35-0200 Abrasive Blasting -Cleaning -
80-T-35-0200 Abrasive Blasting -Cleaning -
Yes QUALIFIED 14/11/2019 09:58:02 26/06/2019 23:30:46
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
02 SurfaceTreatments
02-04 Plating,coating, temporaryprotection, release
agents
Electrolytic cadmiumplating
80-T-35-1107 ChromiumPassivation of
Cadmium - PlatedSurfaces
80-T-35-1107 ChromiumPassivation of
Cadmium - PlatedSurfaces
Yes QUALIFIED WITHLIMITATIONS
14/11/2019 09:58:02 Limited To ChromiumPassivation of
Vacuum DepositedCadmium as per 80-T-35-4200. Limited
To ExtendedWorkbench Activities
(see AP2190.0 fordefinition).
05/05/2009 00:00:00
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
02 SurfaceTreatments
02-04 Plating,coating, temporaryprotection, release
agents
Electrolytic cadmiumplating
80-T-35-4200 Vacuum Deposistionof Cadmium
80-T-35-4200 Vacuum Deposistionof Cadmium
Yes QUALIFIED WITHLIMITATIONS
14/11/2019 09:58:02 LIMITED TOEXTENDED
WORKBENCHACTIVITIES (SEE
AP2190.0 FORDEFINITION)
26/01/2008 00:00:00
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
Yes QUALIFIED 15/11/2019 11:51:29 11/11/2019 14:29:17
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
05 Paints, Coatings,Filler, Sealant
05-01 Primer Application of basicprimer
80-T-35-5002 Coating with Two-component Primer
EP-based
80-T-35-5002 Coating with Two-component Primer
EP-based
Yes QUALIFIED WITHLIMITATIONS
14/11/2019 09:58:02 LIMITED TOEXTENDED
WORKBENCHACTIVITIES (SEE
AP2190.0 FORDEFINITION)
1200.00 9000.00 3000.00 26/01/2008 00:00:00
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
05 Paints, Coatings,Filler, Sealant
05-01 Primer Application of basicprimer
80-T-35-5025 Coating with Two -component Primer
Chromate - free
80-T-35-5025 Coating with Two -component Primer
Chromate - free
Yes QUALIFIED WITHLIMITATIONS
14/11/2019 09:58:02 LIMITED TOEXTENDED
WORKBENCHACTIVITIES (SEE
AP2190.0 FORDEFINITION)
26/01/2008 00:00:00
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application of anti-static paints oncomposite parts
80-T-35-9120 Coating with Paintsand Varnishes,
General
80-T-35-9120 Coating with Paintsand Varnishes,
General
Yes QUALIFIED 14/11/2019 09:58:03 26/06/2019 23:38:48
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
05 Paints, Coatings,Filler, Sealant
05-02 Paints,coatings
Application ofstructural paints
80-T-35-5106 Coating with PUR -based Top Coat
80-T-35-5106 Coating with PUR -based Top Coat
Yes QUALIFIED WITHLIMITATIONS
14/11/2019 09:58:03 LIMITED TOEXTENDED
WORKBENCHACTIVITIES (SEE
AP2190.0 FORDEFINITION)
26/01/2008 00:00:00
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
Non DestructiveTesting
AITM6-9 DirectReading
Coating thicknessmeasurement
AITM6-6006 Measuring coatingthickness by
equipments of themagnetic and eddy
current type
3 AITM6-6006 Measuring coatingthickness by
equipments of themagnetic and eddy
current type
3 Yes QUALIFIED 14/11/2019 09:58:03 01/07/2019 14:23:15
134767 AERO COATINGGMBH
GEWERBEGEBIETREDENTIN
LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS
TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes QUALIFIED 15/11/2019 12:03:41 11/11/2019 14:32:56
134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 I+D-P-146 Application ofsealants
F3 Yes QUALIFIED 11/06/2019 14:27:34 800.00 3000.00 1500.00 01/07/2000 00:00:00
External Report Created On
© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
16 Dec 2019 09:50
7/624
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 01 JoiningTechniques
01-02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 I+D-P-231 Remachado deestructuras de
materialescompuestos de fibra
de carbono
B7 Yes QUALIFIED 09/07/2019 08:43:36 01/07/2000 00:00:00
134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 02 SurfaceTreatments
02-05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
I+D-P-202 Chemical conversionfilms on aluminium
and its alloys
B5 I+D-P-202 Chemical conversionfilms on aluminium
and its alloys
B5 Yes QUALIFIED WITHLIMITATIONS
09/07/2019 08:57:02 VALID ONLY FORTOUCH-UP ONSMALL AREASWITH HANDLE
APPLICATION BYBRUSH (SA WP).
ALODINEMIXTURES
MATERIAL BOUGHTTO QUALIFIEDPROVIDERS.
06/03/2015 00:00:00
134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 05 Paints, Coatings,Filler, Sealant
05-01 Primer Application of basicprimer
I+D-P-064 Paint systems formetallic detail parts
and assemblies
C I+D-P-064 Paint systems formetallic detail parts
and assemblies
C Yes QUALIFIED WITHLIMITATIONS
Top Related