Exoplanet Imaging with the PIAA Coronagraph: Latest Laboratory Results from NASA Ames
Rus Belikov, Michael Connelley, Tom Greene, Dana Lynch, Mark McKelvey, Eugene Pluzhnik, Fred Witteborn
(NASA Ames Research Center)
Olivier Guyon(Subaru / UofA)
DZ 2.0 - 5.5 l/D, contrast = 5.23e-007
-6 -4 -2 0 2 4 6
-4
-2
0
2
4
6-7
-6.5
-6
-5.5
-5
-4.5
-4
-3.5
-3
Outline
• Motivation for PIAA and overview
• Lab description and results
• New PIAA mirror manufacture and simulationsShanghai, July 23, 2009
PIAA (phase-induced amplitude apodization) PIAA (phase-induced amplitude apodization) overview and motivationoverview and motivation
22
PIAA invented by Olivier Guyon with PIAA invented by Olivier Guyon with significant contributions by Bob significant contributions by Bob Vanderbei, Wesley TraubVanderbei, Wesley Traub
High-throughput (almost 100%)High-throughput (almost 100%) Aggressive IWA (2 Aggressive IWA (2 /D)/D) Potentially enables Earth-like planet Potentially enables Earth-like planet
imaging with a 1.4m telescope (PECO)imaging with a 1.4m telescope (PECO) Can also be used on a balloon Can also be used on a balloon
(planetscope) or TPF Flagship(planetscope) or TPF Flagship Track record of successful hardware Track record of successful hardware
development and testingdevelopment and testing
Focal planeOriginal uniformly
illuminated pupil plane
New, apodized pupil plane Focal plane
PECO mission concept Simulated Earth image around Tau Ceti,
Shaped pupil Apodizer
ARC testbed description and role in PIAA ARC testbed description and role in PIAA technology developmenttechnology development
33
New (March 08), flexible, rapidly New (March 08), flexible, rapidly reconfigurable facility in airreconfigurable facility in air
Successor to Olivier Guyon’s 1Successor to Olivier Guyon’s 1stst PIAA PIAA testbed at Subarutestbed at Subaru
Dedicated to testing PIAA and related Dedicated to testing PIAA and related technologiestechnologies
Partnering with JPL’s HCIT, with Partnering with JPL’s HCIT, with complementary roles identifiedcomplementary roles identified ARCARC
initial validation of lower TRL initial validation of lower TRL technologies and conceptstechnologies and concepts MEMS DMsMEMS DMs WFC architecture tradesWFC architecture trades dichroicsdichroics
PIAAgen2 mirror manufacturePIAAgen2 mirror manufacture JPL/HCITJPL/HCIT
higher TRL and vacuum higher TRL and vacuum validationvalidation
testing a variety of testing a variety of coronagraphscoronagraphs
Ames Coronagraph Lab
In a partnership with JPL’s HCIT
Other partnerships and rolesOther partnerships and roles
44
NASA Ames Research CenterTom Greene ARC testbed directorMark McKelvey ARC testbed managerRus Belikov technical leadEugene Pluzhnik experimentsMichael Connelley experimentsFred Witteborn thermal enclosureDana Lynch optical design
Tinsley Laboratories(PIAA mirror manufacture)Daniel JayAsfaw BekeleLee DettmannBridget PetersTitus RoffClay Sylvester
NASA Jet Propulsion Lab John TraugerAndy KuhnertBrian KernMarie LevineWesley TraubStuart ShaklanAmir Give'onLaurent Pueyo
UCSC (DM characterization)Donald GavelDaren DillonRenate KupkeAndrew Norton
UofA/Subaru (PIAA design and consulting)Olivier Guyon
Lockheed Martin(Optical design)Rick KendrickRob SiglerAlice Palmer
First stage of experimentsFirst stage of experiments
55
Initial goal: create a testbed capable of supporting high contrast levels Initial goal: create a testbed capable of supporting high contrast levels (1e-9)(1e-9)
Approach: keep things as simple as possibleApproach: keep things as simple as possible Use lensesUse lenses Use monochromatic lightUse monochromatic light Switch to mirrors and broadband light once testbed stability and Switch to mirrors and broadband light once testbed stability and
wavefront control are developed to better than ~1e-8 contrastwavefront control are developed to better than ~1e-8 contrast (Or maybe lenses can be made sufficiently achromatic and with a (Or maybe lenses can be made sufficiently achromatic and with a
good enough AR coating?)good enough AR coating?)
Light source(single mode fiber-coupled laser)650nm
DM (deformable mirror)
CCD
PIAA System Focusing lensCollimating lens
Focal plane occulter
Lens
PIAA systemPIAA system
Light source(single mode fiber-coupled laser)650nm
DM (deformable mirror)
CCD
PIAA System Focusing lensCollimating lens
Focal plane occulter
Lens
Made by Axsys, diamond-turned CF2, 16mm active diameterMade by Axsys, diamond-turned CF2, 16mm active diameter Post-apodizer (concentric-ring shaped pupil) made by JPL’s Microdevices Post-apodizer (concentric-ring shaped pupil) made by JPL’s Microdevices
laboratory, aluminum on glasslaboratory, aluminum on glass
77
MEMS Deformable Mirror MEMS Deformable Mirror
Light source(single mode fiber-coupled laser)650nm
DM (deformable mirror)
CCD
PIAA System Focusing lensCollimating lens
Focal plane occulter
Lens
Made by Boston Micromachines, 32x32 actuators, 10mm active areaMade by Boston Micromachines, 32x32 actuators, 10mm active area Strong motivation for small MEMS DMs: for small telescopes, small DM Strong motivation for small MEMS DMs: for small telescopes, small DM
size may be necessary to keep instrument size reasonable size may be necessary to keep instrument size reasonable
Contrast results Wavefront control algorithms (both
based on image-plane sensing through DM diversity):
Variant of classical speckle nulling (Trauger and Burrows)
Based on targeting and removing individual speckles
Many speckles at a time For each speckle, scan not only the
phase, but also the amplitude of corresponding ripples on DM
Slow (100s of iterations, hours), but does not require detailed system model
Electric Field Conjugation (Give’on et. al.)
Estimates and corrects the entire dark zone on each iteration
Fast (minutes), but requires a precise system model
QuickTime™ and aTIFF (LZW) decompressor
are needed to see this picture.
1.5e-7 from 2.0 to 4.8 /D
StabilityStability
99
QuickTime™ and a decompressor
are needed to see this picture.
~10-20mK rms temperature variation over 20 minutes 3e-9 - 1e-8 rms speckle variation over 20 minutes
Active thermal control systemActive thermal control system
Water circuit with PID controllerWater circuit with PID controller An earlier version already demonstrated by Guyon at SubaruAn earlier version already demonstrated by Guyon at Subaru Expected to provide a few mK-level temperature stability or better and stability of better than 1e-9Expected to provide a few mK-level temperature stability or better and stability of better than 1e-9
1010
Limiting factorsLimiting factors Major limiting factors in the past:Major limiting factors in the past:
CCD artifacts (scattering off microlenses, CCD circuitry and shutter)CCD artifacts (scattering off microlenses, CCD circuitry and shutter) Eliminated by introducing a focal plane stopEliminated by introducing a focal plane stop
Ghosts from transmissive elementsGhosts from transmissive elements Eliminated by a long-coherence-length laserEliminated by a long-coherence-length laser
Alignment, baffling, system model, air currentsAlignment, baffling, system model, air currents
Current known limiting factorsCurrent known limiting factors Polarization effectsPolarization effects
Starting to control with polarizersStarting to control with polarizers
Expected future limiting factorsExpected future limiting factors Stability (1e-8)Stability (1e-8) DM voltage level quantization (1e-9 to 1e-8)DM voltage level quantization (1e-9 to 1e-8)
Solving limiting factors seems to proceed at a predictable rate (2x Solving limiting factors seems to proceed at a predictable rate (2x improvement in contrast every 6 weeks), as long as funding persistsimprovement in contrast every 6 weeks), as long as funding persists
1111
1212
By Sydney Harris
New PIAA mirrors manufacturedNew PIAA mirrors manufactured
Made by TinsleyMade by Tinsley Gen2: Better achromatic design, better surface accuracy than gen1 mirrorsGen2: Better achromatic design, better surface accuracy than gen1 mirrors Currently being tested at HCITCurrently being tested at HCIT
1414
Wavefront qualityWavefront quality
Surface figure spec was only for spatial frequencies < 20 cycles per apertureSurface figure spec was only for spatial frequencies < 20 cycles per aperture That left mid-spatial frequency errors highThat left mid-spatial frequency errors high We now know though simulations that these errors can hurt usWe now know though simulations that these errors can hurt us
Modeling of gen2 mirrorsModeling of gen2 mirrors
1515
Fast but approximate model confirmed by higher fidelity Fast but approximate model confirmed by higher fidelity ones (Amir Give’on and Laurent Pueyo)ones (Amir Give’on and Laurent Pueyo)
Predicts that current Tinsley mirrors will get to no better Predicts that current Tinsley mirrors will get to no better than 1e-9than 1e-9
Limited by chromaticity of frequency folding of mid-spatial Limited by chromaticity of frequency folding of mid-spatial frequency errorsfrequency errors
Different WFC architectures don’t help muchDifferent WFC architectures don’t help much Mirrors can be smoothed by a factor of 2, bringing Mirrors can be smoothed by a factor of 2, bringing
theoretically possible contrast to 1e-10theoretically possible contrast to 1e-10 Modeling of PIAA is mature, but accuracy of fast Modeling of PIAA is mature, but accuracy of fast
approximate models not well quantifiedapproximate models not well quantified
ConclusionsConclusions
1616
New laboratory at NASA Ames was established for prototyping New laboratory at NASA Ames was established for prototyping PIAA coronagraph and related technologies through early TRL PIAA coronagraph and related technologies through early TRL levels before vacuum testing at JPL’s HCITlevels before vacuum testing at JPL’s HCIT
State of the art coronagraph performance at 2 State of the art coronagraph performance at 2 /D : 1.5e-7/D : 1.5e-7
Vacuum testbeds may not be required to work in high contrasts Vacuum testbeds may not be required to work in high contrasts (~1e-9)(~1e-9)
A new PIAA coronagraph mirror set manufactured (by Tinsley) A new PIAA coronagraph mirror set manufactured (by Tinsley) designed for 1e-9 contrast in a 10% banddesigned for 1e-9 contrast in a 10% band
Top Related