CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -1 -
EVT Eye Vision Technology
Technology is our passion !
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -2 -
Sensorfusion
Multisensorik in der Bildverarbeitung 3D Vision, Thermografie und Farbe
Michael Beising CEO EVT
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -3 -
EVT kurzer Überblick
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -4 -
EVT Standort & Distribution
EVT Headquater
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -5 -
EyeVision
„Ready to use“ Software für die optische QS
Multi Sensor und Multi Plattform Support
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -6 -
EyeVision
Hardwareplattformen
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -7 -
Vision Sensoren
Smart Kameras
Embedded Systeme
PC Systemen
3D Sensors and Systems
EyeVision verfügbar auf
Windows, LINUX, MacOSX, VCOS
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -8 -
EyeVision Sensorauswahl
1-D Sensoren (Zeilenkameras grau/farbe)
2-D Sensoren (Matrixkameras grau/farbe)
2-D Temperatursensoren (Bolometriesensoren)
3-D Sensoren (Triangulation, Flächensensor)
X-Ray
Ultraschall
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -9 -
EyeVision
Drag and Drop –
aus der Toolbox zum Programm
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -10 -
Toolbox mit Befehlssätzen Messen, Prüfen, 3D ...
Programmeditor – grafische Drag and Drop Programmierung
Bildanzeigen für Grau- und Farbbild,
2D, 2 ½ D, 3D Punktewolke
Einlernoberfläche
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -11 -
Beispiel Prüfmerkmal einlernen
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -12 -
Beispiel Prüfprogramm Biegewinkel
Ziele
• Kantenantastung
• Geradenbestimmung
• Winkelbestimmung
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -13 -
EyeVision
Multi Sensor Auswertung
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -14 -
Beispiel 3D und Thermographie
Toolboxen
Lesen
3D Punktewolke
3D Profil
Thermographie
Beleuchtungsteuerung (z.B. Laser, Heizstrahler)
Hardware
3D Scanner - Punktewolke - Intensitätsbild
Thermokamera
Wärmebild
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -15 -
Programmerstellungs-Modus
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -16 -
Prozess Modus
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -17 -
Spezielle Hardware
Sensoren - Thermographie Kamera
Auswertehardware
- ZYNQ SoC mit FPGA
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -18 -
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -19 -
EyeVision im Einsatz
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -20 -
EyeVision
Beispiel im Prüfmodus
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -21 -
Display 3D Punktewolke Display 2 ½ D Abbildung 2D Profilschnitt aus Punktewolke
Prozessmode Designer
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -22 -
3D Sensoren zur Erzeugung
einer Punktewolke
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -23 -
Triangulations- Scanner
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -24 -
Technical Data: EyeScan LT 3D
Scan Rate up to 400 Hz
Laser Class 1, wave length 635nm, rated power 5 mW
Interface 2 x Input, 4 x Output
Supply Voltage 24 V ± 20%
Dimension 140 x 70 x 35 mm
Lateral Resolution 80 - 300 µm
Vertical Resolution 15 - 50 µm
Horizontal Range 50 - 200 mm
Vertical Range 25 - 90 mm
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -25 -
weitere 3D Sensoren
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -26 -
Triangulations- Sensor Triangulations- Sensor
Flächensensoren Flächensensoren
Verschiedene 3D Sensoren eine Software
EyeVision
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -27 -
Beispiel von 3D Punktewolken
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -28 -
Verbundfaserwerkstoff
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -29 -
Andruckpunkte aus Gummi
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -30 -
Platinenkontrolle
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -31 -
Arbeitsbereich Überwachung ToF Time of Flight
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -32 -
EyeVision Seminare 2D und 3D
Regelmäßige Schulungen
Monatliches Basis-Seminar
Alle 2 Monate Advanced-Seminar
Wo: Karlsruhe * Chicago * Singapur * Tokyo
CONTROL 2015 * 5. -8. Mai - 2015 © EVT Eye Vision Technology -33 -
Vielen Dank
EVT Eye Vision Technology Haid-und-Neu-Str. 7 76131 Karlsruhe Tel.: +49 721 626 905 82 Mail: [email protected] Web: www.evt-web.com
Top Related