3Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
Introduction
This catalogue provides an overview of Grau products for the European aftermarket. They include air tanks and saddles, fittings, air coils and air tubes as well as electrical coils.
Durable and reliable, Grau products are thoroughly tested for compliance with Haldex standards and come with a full warranty.
This catalogue presents detailed information about each product range for easy identification of required items. Inclusion or exclusion of an item has no bearing on its availability. For availability, please contact Haldex directly.
If you cannot find an item:
› Check Findex at www.haldex.com/Findex
› Contact Haldex directly
We hope you find this catalogue useful. We welcome all feedback and suggestions for improvement.
Thank you for choosing Haldex.
INTRODUCTION
Although Haldex does its best to ensure the accuracy of all information in this catalogue, Haldex assumes no responsibility for any issues that may arise as a result of inaccurate data in this catalogue. Haldex reserves the right to amend this information without notice.
Go to Findex
4 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue EuropeCONTENTS
System components Page
ABS system 10
EBS system 12
Air coils and air tubes Page
Air coils 24
Air tubes polyamide PA12 PHLY air tubes 26
Air tubes polyamide PA10.12 PHL air tubes 28
Air tubes elastomeric polyester 30
Air tanks and saddles Page
Aluminium air tanks 16
Steel air tanks 18
Saddles for air tanks 20
Accessories Page
Alu manifold 34
Miscellaneous 35
5Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe CONTENTS
Actuation Page
Double diaphragm spring brake actuators 44
Pressure converters 45
Air brake Page
Switches 48
Brake adjusters Page
Manual brake adjusters 52
Air disc brakes Page
Disc brake pads 56
6 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue EuropeCONTENTS
Fittings
Straight male terminal-RTC 61
Straight male terminal 63
Adjustable elbow stud-RTC 65
Adjustable elbow stud 66
Adjustable tee stud-RTC 67
Adjustable tee stud 68
Adjustable tee stud with test point-RTC 69
Adjustable tee stud with test point 70
Union-RTC 71
Union 71
Tee union-RTC 72
Fittings
Straight female terminal 73
Stud bulkhead terminal-RTC 73
Stud bulkhead terminal 74
Swivel elbow stud-RTC 74
Swivel elbow stud 75
Swivel stud with test point 75
Swivel tee stud 76
Swivel adaptor 77
Swivel stud 79
Swivel 80
7Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe CONTENTS
Fittings
Pivoted adaptor 82
Test point 85
Plug 86
Reducer 86
Adaptor 87
Bulkhead adaptor 89
Threaded adaptor bulkhead 90
Bulkhead elbow 91
Drain valve 91
Elbow hosetail 92
Fittings
Hosetail 92
Male connector 93
Bulkhead male connector 93
Bulkhead union 94
Male elbow 94
Reinforcing insert for DIN tube 95
Stud-standpipe adaptor 95
RTC tool 39 96
9Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
SYSTEM COMPONENTS
ABS system 10
EBS system 12
ABS system
Anti-lock braking system which provides better road adherence and prevents the wheels from locking up during braking.
042 566 509 042 572 209 042 572 309 950 364 072 950 364 436
950 610 010
10 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
SYSTEM COMPONENTS
ABS system
Part
nu
mb
er
Typ
e
Ap
plic
atio
n
Syst
em
Iden
tifica
tion
Incl
ud
ed
Fuse
Vo
ltag
e (V
)
No
te
042 566 509 socket ISO 7638 c/w pin
042 572 209 pin ISO 7638 fused 1.5 mm
042 572 309 socket ISO 7638MODAL/MODULAR
green pins x5 (crimp) fused 24
302 002 011 plug ISO 7638 pins x7 24 c/w boot
364 143 031power cable
ISO 7638 MODAL pins x5 unfused 12
950 364 072 socket ISO 7638MODAL/MODULAR
green pins x5 (crimp) fused 24 5x1.5 mm²
950 364 436 socket ISO 7638 universal blue pins x7 (screw) fused 24(3/5)x1.5 mm² +2x4 mm²
950 610 010 plug ISO 7638
950 611 030 flex coil ISO 1185 (24N) pins x7light system; also for EBS
950 611 030/OM flex coil ISO 37315 (24S)overmoulded; also for EBS
950 611 035 flex coil ISO 3731 (24S)light system; also for EBS
950 611 035/OM flex coil ISO 3731 (24S)overmoulded; also for EBS
016 705 309 018 500 309 018 500 409 042 566 409 042 571 409 042 585 709
756 115 88 756 116 75 756 119 12 756 119 73 756 132 18
016 705 509 393 585 001
11Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
SYSTEM COMPONENTS
ABS system
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
016 705 309 exciter 100 teeth inner Ø (mm): 152
016 705 509 exciter 100 teeth inner Ø (mm): 176 BPW 12 TM
016 705 609 exciter 100 teeth inner Ø (mm): 183
016 705 709 exciter 80 teeth inner Ø (mm): 183
018 500 309 exciter 100 teeth inner Ø (mm): 165 ROR 22.5'' TM, Fruehauf
018 500 409 exciter 80 teeth inner Ø (mm): 162 ROR 15'' TM, Fruehauf
028 512 809 label tab-tag
028 532 409 label Info Point 39x39 transparent
042 566 409 pin ISO 7638 socket x1 1.5 mm
042 571 409 bulb ABS trailer warning lamp 24V, 5W double pole
042 585 709 grease 4 mg molycotte
393 585 001 exciter 80 teeth inner Ø (mm): 152 BPW 9 TM
393 585 011 exciter 80 teeth inner Ø (mm): 176
756 115 88 warning lamp
756 116 75 junction box
756 119 12 bulb ABS trailer warning lamp 24V, 5W double pole
756 119 73 bracket ABS trailer warning lamp
756 132 18 connection box electrical connection MGX orange
Syst
em c
om
po
nen
ts
950 610 020 950 610 030 950 610 040 950 611 040
EBS system
EBS system – electronic braking system that combines ABS function, Electronic load sensing, CAN communication and Stability function.
12 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
SYSTEM COMPONENTS
EBS system
Part
nu
mb
er
Typ
e
For
Wo
rkin
g
len
gh
t (m
)
Incl
ud
ed
Mat
eria
l
Ap
plic
atio
n
072 113 socket ADR
072 123 socket ADR
072 213 plug ADR
072 223 plug ADR
950 610 020 socket ISO 7638 pins x7 (crimp) EB+
950 610 030 socket ISO 7638 pins x7 parking
950 610 040 electrical coil ISO 7638 3.5 pins x7 PUR 5x1,5mm²+2x4mm²
950 610 050 electrical coil ISO 12098 3.5 pins x15 light system
950 611 040 flex power coil ISO 12098 (24N/24S) 3.5 pins x15 PUR light system
950 611 040/OM flex power coil ISO 12098 (24N/24S) 3.5 pins x15 PUR light system
13Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
SYSTEM COMPONENTS
EBS system
042 623 719
Part
nu
mb
er
Typ
e
Att
rib
ute
A
042 623 719PC interface carry case
c/w foam inserts
11541 hose clamp kit
4200033 bracket alu
Syst
em c
om
po
nen
ts
AIR TANKS
Aluminium air tanks 16
Steel air tanks 18
Saddles for air tanks 20
15Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR TANKS AND SADDLES
Aluminium air tanks
Aluminium air tanks offer safe storage of pressurised air. Lightweight aluminium tanks guarantee more than 60 percent less vehicle tare weight. And the absence of rust and iron particles means better cleaning in the pneumatic cycle.
Part
nu
mb
er
No
. of
sid
e &
en
d p
ort
s
Mat
eria
l
Ø (
mm
)
Len
gth
L
(mm
)
Len
gth
L1
(mm
)
Port
Stan
dar
d
Cap
acit
y (L
)
Max
o
per
atin
g
pre
ssu
re (
bar
)
030 06031 013U U (1+1+1+2) aluminium 310 898 690 M22x1,5 EN286-2 60 13
030 10039 612C C (2+1+1) aluminium 396 913 671 M22x1,5 EN286-2 100 12
030 1020 615C C (2+1+1) aluminium 206 375 259 M22x1,5 EN286-2 10 15
030 12039 612C C (2+1+1) aluminium 396 1074 807 M22x1,5 EN286-2 120 12
030 2020 615C C (2+1+1) aluminium 206 700 563.5 M22x1,5 EN286-2 20 15
030 2024 615C C (2+1+1) aluminium 246 510 370 M22x1,5 EN286-2 20 15
030 3.815 415C C (2+1+1) aluminium 154 M22x1,5 EN286-2 3.8 15
030 3024 615C C (2+1+1) aluminium 246 730 568 M22x1,5 EN286-2 30 15
030 4024 615C C (2+1+1) aluminium 246 945 805 M22x1,5 EN286-2 40 15
030 4027 615C C (2+1+1) aluminium 276 766 612 M22x1,5 EN286-2 40 15
030 4031 013C C (2+1+1) aluminium 310 629 427 M22x1,5 EN286-2 40 13
030 6031 013C C (2+1+1) aluminium 310 907 707 M22x1,5 EN286-2 60 13
030 6039 612C C (2+1+1) aluminium 396 583 316 M22x1,5 EN286-2 60 12
030 8031 013C C (2+1+1) aluminium 310 1180 980 M22x1,5 EN286-2 80 13
030 8039 612C C (2+1+1) aluminium 396 748 501 M22x1,5 EN286-2 80 12
030 4027 615C 030 6039 612C 030 8031 013C030 4031 013C 030 6031 013C
030 10039 612C 030 2020 615C 030 2024 615C030 1020 615C 030 12039 612C
030 8039 612C
030 3024 615C
16 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR TANKSAluminium air tanks
Air Tank Model “C”
L
A
L1
A
A
Air tank model C
Air Tank Model “U”
L
A
L1
A A
A
Air tank model U
17Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR TANKS
Air
tan
ks
Aluminium air tanks
Steel air tanksSteel air tanks offer safe storage of pressurised air. They are powder-coated inside and out. They are renowned for longevity and resistance to corrosion. They offer not only top safety and maximum service life but also, due to their powder coating, satisfy the highest quality requirements of leading European vehicle manufacturers.
Part
nu
mb
er
No
. of
sid
e &
en
d p
ort
s
Mat
eria
l
Ø (
mm
)
Len
gth
L
(mm
)
Len
gth
L1
(mm
)
Port
Stan
dar
d
Cap
acit
y (L
)
030 202 446WB U (1+1+1+2) steel 246 500 483 M22x1,5 EN286-2 20
030 302 446WB U (1+1+1+2) steel 246 720 703 M22x1,5 EN286-2 30
030 350 109 C (2+1+1) steel 206 315 190 M22x1,5 EN286-2 8.5
030 350 109_24 C (2+1+1) steel 206 315 190 M22x1,5 EN286-2 8.5
030 350 209 C (2+1+1) steel 206 370 245 M22x1,5 EN286-2 10
030 350 209/A C (2+1+1) steel 206 M22x1,5 EN286-2 10
030 350 509 C (2+1+1) steel 206 690 565 M22x1,5 EN286-2 20
030 350 609 C (2+1+1) steel 246 500 361 M22x1,5 EN286-2 20
030 350 909 C (2+1+1) steel 246 720 571 M22x1,5 EN286-2 30
030 351 209 C (2+1+1) steel 276 760 605 M22x1,5 EN286-2 40
030 351 509 C (2+1+1) steel 246 940 773 M22x1,5 EN286-2 40
030 351 609 C (2+1+1) steel 276 1110 949 M22x1,5 EN286-2 60
030 351 709 C (2+1+1) steel 396 580 333 M22x1,5 EN286-2 60
030 351 809 C (2+1+1) steel 246 1352 1185 M22x1,5 EN286-2 60
030 352 009 C (2+1+1) steel 396 750 503 M22x1,5 EN286-2 80
030 352 209 C (2+1+1) steel 396 915 706 M22x1,5 EN286-2 100
030 360 809 C (2+1+1) steel 310 895 712 M22x1,5 EN286-2 60
030 362 009 C (2+1+1) steel 310 620 405 M22x1,5 EN286-2 40
030 362 009/12 C (2+1+1) steel 310 620 405 M22x1,5 EN286-2 40
030 363 609 C (2+1+1) steel 206 530 405 M22x1,5 EN286-2 15
030 390 109/30 C (2+1+1) steel 246 M22x1,5 EN286-2 30
030 390 709 C (2+1+1) steel 206 M22x1,5 EN286-2 20
030 402 776WB U (1+1+1+2) steel 276 760 743 M22x1,5 EN286-2 40
030 603 110WB U (1+1+1+2) steel 310 895 878 M22x1,5 EN286-2 60
030 803 996WB U (1+1+1+2) steel 396 750 733 M22x1,5 EN286-2 80
032 253 013S U (1+1+1+2) steel 246 685 M22x1,5 EN286-2 30
032 304 513S U (1+1+1+2) steel 300 700 M22x1,5 EN286-2 45
032 306 013S U (1+1+1+2) steel 300 888 M22x1,5 EN286-2 60
18 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR TANKSSteel air tanks
030 350 909 030 351 209030 350 109 030 350 609030 350 209 030 350 509
030 351 609030 351 509 030 351 709 030 351 809 030 352 009 030 352 209
030 360 809 030 362 009 030 363 609 032 253 013S 032 304 513S
1
032 306 013S
19Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
Air
tan
ks
AIR TANKS
Steel air tanks
030 406 009 030 7020 600 030 7027 600030 7024 600 030 7031 000 030 7039 600
030 406 001 030 406 003 030 406 005030 406 004 030 406 007 030 406 008
20 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR TANKS
Saddles for air tanks
Part
nu
mb
er
Typ
e
Ø (
mm
)
R A B E H J L P No
te
030 406 001 standard ''V-shaped'' 276 138 80 30 288 288 320 361
030 406 003 standard ''V-shaped'' 310 155 80 30 323 323 357 386
030 406 004 standard ''V-shaped'' 396 198 80 30 409 409 444 465
030 406 005 standard ''V-shaped'' 206 103 80 30 218 265 255 275
030 406 006 strap 152for air tank (alu)
030 406 007 standard ''V-shaped'' 246 123 80 30 258 258 292 325
030 406 008 italian ''V-shaped'' 396 198 80 30 45 45 444 465U bolt M8; 1 support; flat washer
030 406 009 italian ''V-shaped'' 310 155 82 30 45 45 357 382U bolt M8; 1 support; flat washer
030 7020 600 foldable ''strap'' 206 130 65 11x16 11x16 230 kit of 2
030 7024 600 foldable ''strap'' 246 180 90 11x16 11x16 270 kit of 2
030 7027 600 foldable ''strap'' 276 180 90 11x16 11x16 300 kit of 2
030 7031 000 foldable ''strap'' 310 200 100 11x16 11x16 335 kit of 2
030 7039 600 foldable ''strap'' 396 250 125 11x16 11x16 420 kit of 2
032 1500 01S standard 150 kit of 2
032 2000 01S standard 200 100 90 280 kit of 2
032 4000 01S standard 246 125 55 300 kit of 2
032 5000 01S standard 396 200 110 506 kit of 2
032 7530 01S standard 300 150 50 347 kit of 2
032 7730 00S standard 300 150 70 370 kit of 2
032 2000 01S 032 4000 01S 032 7530 01S032 5000 01S 032 7730 00S 030 406 001
21Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR TANKS
Air
tan
ks
Saddles for air tanks
V-shaped Italian V-shaped
Standard Foldable strap
AIR COILS AND AIR TUBES
Air coils 24
Air tubes polyamide PA12 PHLY air tubes 26
Air tubes polyamide PA10.12 PHL air tubes 28
Air tubes elastomeric polyester 30
23Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
070 311 232 1331C 070 31123 31331C070 11122 23131 070 21123 21331C 070 21123 31331C 11968
24 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
C
DFemale swivel
m18x1,5
FMale removable
m 16x1,5
EFemale fixed
m18x1,5
GMale fix
m16 x 1,5
HMale fix long
m18 x 1,5
A
B
Air coils
Air coils with plastic colour-coded tails satisfy DIN74323 safety parameters as tested by TÜV. The coils have been tested to 10,000 articulations (ISO 7375). The tube has been approved in accordance with DIN 74324 (black) or DIN 73378 (colour).
› Working pressure: < 10 bars
› Minimum burst pressure: 57 bars
› Operating temperature : -40°C to +70°C
Part
nu
mb
er
Mat
eria
l
Co
il co
lor
Wo
rkin
g le
ng
ht
(m)
Thre
ad 1
B (
mm
)
C (
mm
)
Pro
teti
on
sp
rin
g
Thre
ad 2
Ap
plic
atio
n
070 11122 23131 PA12 PHL black 4 male M16 12x9 110black plastic
male M18general and OEM
070 21123 21331C PA12 PHL black 4 male M16 12x9 110 red plastic male M18general and OEM
070 21123 31331C PA12 PHL black 6 male M16 12x9 110 red plastic male M18 extended
070 31123 21331C PA12 PHL black 4 male M16 12x9 110yellow plastic
male M18general and OEM
070 31123 31331C PA12 PHL black 6 male M16 12x9 110yellow plastic
male M18 extended
11968 nylon tubing red4.572 (15FT)
1/2'' metal
Air coils
070 33124 45522C033 016 509 070 22124 45522C033 016 009
25Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
Air coils
Part
nu
mb
er
Mat
eria
l
Co
il co
lor
Wo
rkin
g le
ng
ht
(m)
Thre
ad 1
B (
mm
)
C (
mm
)
Pro
teti
on
sp
rin
g
Thre
ad 2
Ap
plic
atio
n
033 016 009 PA10.12 PHL yellow 4 female M18 12x9 105black plastic
female M18iron zinc plated
033 016 509 PA10.12 PHL red 4 female M18 12x9 105black plastic
female M18iron zinc plated
070 22124 45522C PA10.12 PHL red 4.72 female M18 12x9 115 metalmale M16 L15mm
drawbar
070 33124 45522C PA10.12 PHL yellow 4.72 female M18 12x9 115 metalmale M16 L15mm
drawbar
Air
co
ils a
nd
air
tu
bes
Part
nu
mb
er
Len
gth
(m
)
Co
lou
r
Mat
eria
l
Ø in
t (m
m)
Thic
knes
s (m
m)
Min
imu
m
ben
din
g r
adi-
us
(mm
)
Wo
rkin
g p
res-
sure
(b
ar)
Stan
dar
d
Dep
th m
ark
067 006 010H 1000 black PA12 PHLY 4 1 35 36 DIN74324 c/w
067 008 010H 850 black PA12 PHLY 6 1 40 26 DIN74324 c/w
067 010 010H 500 black PA12 PHLY 8 1 60 20 DIN74324 c/w
067 012 015H 400 black PA12 PHLY 9 1.5 70 26 DIN74324 c/w
067 015 015H 250 black PA12 PHLY 12 1.5 100 20 DIN74324 c/w
067 006 010H 067 008 010H 067 010 010H
PA12 PHLY air tubes
PA12 high-pressure monolayers air tubes are produced in accordance with DIN 74324 (black tubes) for automotive braking applications, and with DIN 73378 for automotive suspension application.
Operating temperature › From -60° C to +130°C
How to use air tubes › Cut tube in increments equal to the depth
› Insert tube into push-in fitting
› Check that end of push-in fitting touches next depth mark
Tolerance for external diameter
› From 3 mm to 10 mm: ± 0.10 mm
› From 11 mm to 20 mm: ± 0.15 mm
067 012 015H 067 015 015H
26 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
Air tubes PA12 PHLY
Our standard marking
› Grau
› DIN 74324 (black) for automotive braking applications or DIN 73378 (colour) for automotive suspension application
› External diameter
› Wall thickness
› PA12 ... (detailed specification of material)
› Manufacturer code (one letter + one number)
› Made in (country of production)
› Production information (production date / production lot)
27Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
Air tubes PA12 PHLY
Air
co
ils a
nd
air
tu
bes
Part
nu
mb
er
Len
gh
t (m
m)
Co
lor
Mat
eria
l
Ø e
xt (
mm
)
Ø in
t (m
m)
Thic
knes
s (m
m)
Min
imu
m
ben
din
g
rad
ius
Wo
rkin
g
pre
ssu
re (
bar
)
Stan
dar
dS
067 0410 110 25 black PA10.12 PHL 4 2 1 20 49 ISO7628 Cat.3
067 0610 110 25 black PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 111 100 black PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 121i 100 yellow PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 131i 100 red PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 141 100 blue PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 161 100 green PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0610 171 100 natural PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3
067 0810 110 25 black PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 111 100 black PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 118 850 black PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 121i 100 yellow PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 131i 100 red PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 141 100 blue PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 161 100 green PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 0810 171 100 natural PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3
067 1010 110 25 black PA10.12 PHL 10 8 1 60 16 ISO7628 Cat.1
067 1010 111 100 black PA10.12 PHL 10 8 1 60 16 ISO7628 Cat.1
067 1012 111 100 black PA10.12 PHL 10 7.5 1.25 50 21 ISO7628 Cat.3
067 1015 110 25 black PA10.12 PHL 10 7 1 45
067 1015 111 100 black PA10.12 PHL 10 7 1 45
067 1210 111 100 black PA10.12 PHL 12 8 2 80 29
067 1215 110 25 black PA10.12 PHL 12 9 1.5 70 21 ISO7628 Cat.3
28 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
Air tubes PA10.12 PHL
067 0410 110 067 0610 110 067 0610 111 067 0610 121i
067 0610 161 067 0610 171 067 0810 110 067 0810 111
067 0810 141 067 0810 161
067 0610 131i 067 0610 141
067 1010 110 067 1010 111
067 0810 118 067 0810 121i
067 1012 111 067 1015 110
067 1015 111 067 1210 111 067 1215 110
29Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR COILS AND AIR TUBES
Air tubes PA10.12 PHL
Air
co
ils a
nd
air
tu
bes
Part
nu
mb
er
Len
gh
t (m
m)
Co
lor
Mat
eria
l
Ø e
xt (
mm
)
Ø in
t (m
m)
Thic
knes
s (m
m)
Stan
dar
dS
067 1215 110_1000MM 10 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_1010MM 10.1 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_1120MM 11.2 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_140MM 1.4 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_150MM 15 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_190MM 1.9 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_210MM 2.1 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_230MM 2.3 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_320MM 3.2 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_380MM 3.8 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_425MM 4.25 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 110_980MM 9.8 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 111 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 114 400 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 121i 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1215 131i 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1420 111 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1515 110 25 black elastomeric polyester 12 9 1.5 ISO7628 Cat.1
067 1515 111 100 black elastomeric polyester 12 9 1.5 ISO7628 Cat.1
067 1520 210 25 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1520 211 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010
067 1620 110 25 black elastomeric polyester 12 9 1.5 ISO7628 Cat.3
067 1620 111 100 black elastomeric polyester 12 9 1.5 ISO7628 Cat.3
067 1820 110 25 black elastomeric polyester 12 9 1.5 ISO7628 Cat.1
067 1820 111 100 black elastomeric polyester 12 9 1.5 ISO7628 Cat.1
067 2020 111 100 black elastomeric polyester 12 9 1.5
30 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR COILS AND AIR TUBESAir tubes elastomeric polyester
067 1215 111 067 1215 114 067 1215 121i 067 1215 131i 067 1420 111 067 1515 110
067 1515 111 067 1620 111067 1520 210 067 1520 211 067 1620 110 067 1820 110
067 1820 111 067 2020 111
31Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
AIR COILS AND AIR TUBESAir tubes elastomeric polyester
Air
co
ils a
nd
air
tu
bes
ACCESSORIES
Alu manifold 34
Miscellanous 35
33Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
Part
nu
mb
er
Tub
e ø
Stra
igh
t
Ch
eck
po
int
plu
g
No
te
420VM0300 8 mm & 6 mm 6 mm & 1 mm no & no 1
420VM0301 8 mm & 6 mm 6 mm no 1
980 00000 0013 8 mm 8 mm yes no elbow
420VM0300 420VM0301 980 000000 0013
34 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
ACCESSORIES
Alu manifold
024 027 609 031 001 309 032 071 409 032 072 819
032 6920 0700 032 6920 0700OR 032 6980 0600 032RID67
032OR13
032 6920 0600 032 6920 0600OR
032OR6
032 776 709T 032DMM96050
35Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
Att
rib
ute
D
006 000 884_M sticker for tool case RTC
024 027 609 O-ring ECAM
025 027 109 flange seal
030 9300 000 kit protection for air tank strap 0307
031 001 309 silencer ILAS® for exhaust R1/8''
032 040 609 nipple MA16-MA12=TU6
032 071 409 fitting COLAS® valve
032 072 819 fitting COLAS® valve universal push-in ø 8 mm
032 3620 0142 plug M14x1.5 brass cup c/w O-ring
032 6920 0600 nut F: 16x1.5 H (mm): 7.5 Ch (mm): 22
032 6920 0600OR nut F: 16x1.5 H (mm): 7.5 Ch (mm): 22 c/w O-ring
032 6920 0700 nut F: 22x1.5 H (mm): 8.5 Ch (mm): 28
032 6920 0700OR nut F: 22x1.5 H (mm): 8.5 Ch (mm): 28 c/w O-ring
032 6980 0600 nut F: 16x1.5 H (mm): 6 Ch (mm): 22
032 776 709T manifold M16 7 ports
032DMM96050 steel spring tube 12 mm M16M c/w fittings
032RID67 adaptor M16x1.5 F: 22x1.5 L (mm): 8.5Ch (mm): 28
032OR13 O-ring M1/2
032OR6 O-ring M16
Acc
esso
ries
36 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
032OR7 065 000 109 065 000 109/40 065 001 009
11150 11500 135 626 284 156 569 507
065 001 009/40 073 133 008
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
032OR7 O-ring M22
051 016 009 screw ISO 4017
054 501 209 washer
065 000 109 hose 13x25 50 m DIN 74310
065 000 109/40 hose 13x25 40 m DIN 74310
065 001 009 hose 11x18 50 m DIN 74310
065 001 009/40 hose 11x18 40 m DIN 74310
065 001 009P hose 11x18length as required; 44 m minimum
DIN 74310
073 133 008 cable ADR
11150 plug reducer
11500 flexastik
11547 hose clamp for flexastik N30200AE pack of 10
11611 hose ring
135 626 2842 pole electrical connector
female in
156 569 507 vent valve
312 364 037 flatpoint II cable 1,5 m
316 614 077 flatpoint LED trailer light white c/w 0,5 m cable
320 065 011 foot valve
37Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
420 100 258 420 2300 102 420 56030 0204 420CAP01
420FTN005 420FTN0505 420VM0104 42593163
420CLAMP001 420FTN004
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
420 100 258 cap cap caoutchouc for test point fitting
420 2300 102 modulator valve 0.8 bar pneumatic
420 56030 0204 gasket 0.3 m
420CAP01 protection cap
420VP0107 steel bracket inox 430
4203726 fitting, miscellaneous
420CLAMP001 zip tie 200x3.6 mm
420FTN004 exhaust protection filter 1/8''
420FTN005 exhaust protection filter 1/4''
420FTN0505 filter nylon M16x1,5
420VM0104 support manometer, inox D100 ½'' gas
42593163 air connection brake chamber 2x M16
580 13115 9802 fitting manifold M12x1.5 76 mm 9 mm
580 D20 040 cylinder double effect980000111038, 980000111055, 980000111906
ø 20 mm stroke 40 mm
580 D20 040WS control cylinder ø 20 mm stroke 40 mm c/w boot
580 S20 100 cylinder simple effect 980000159002
580 D20 040WS
Acc
esso
ries
38 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
580011
580013 580014K 580019 580023K 580024
580 S20 040SP 580001 580002 580004 580006
580027K
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
Att
rib
ute
D
580 S20 040SP cylinder
580001 3/2 way valve
580002 3/2 way valve 1/8”bi-stable c/w top lever
manual
580004 3/2 way valve 1/8”normally opened-pneumatic pilot
580006 3/2 way valve 1/8” roller lever spring return
580011 double check valve 1/8”
580013 one way flow regulator
580014K 3/2 way valve 1/8” solenoidnormally closed-spring
580019 3/2 way valve 1/8”normally closed pneumatic pilot-spring
580023K 3/2 way valve 1/8” solenoid spring return 24V
580024 5/2 way valve 1/4”normally open detented
push-pull
580027K 3/2 way valve 1/4” solenoid spring return 24V
580028 control valve
580029 3/2 way valve 1/8”tappet operated spring return
39Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
580042K 580044 580050 580060 580061 580062
580028 580032 580033K 580038K 580039 580040K
580065K 580066K 580067
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
Att
rib
ute
D
580032 5/2 way valve 1/4” pneumatic pilot
580033K 3/2 way valve 1/4” solenoid spring return 24V
580038K 3/2 way valve 1/8” solenoid normally closed 24V
580039 double check valve 1/4”
580040K 3/2 way valve 1/8” solenoidnormally opened/closed
580042K 3/2 way valve 1/8” solenoidnormally opened
24V
580044 pressure gauge ø 50 mm 1/4”
580050 3/2 way valve 1/8” c/w red knob
580060 3/2 way valve 1/8” solenoid
580061 5/2 way valve 1/8” normally opened push pull
580062 5/3 way valve 1/8” pneumatic
580065K 5/2 way valve 1/4” c/w coil
580066K DC coil
580067 3/2 way valve 1/4” normally closed pneumatic pilot
580068X pressure gauge
580070 3/2 way valve 1/8
580068X 580070
Acc
esso
ries
40 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
580071 580075K 580078 580082 580084 580085K
580086C 580090 580109 580LP1 680 002 127
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
Att
rib
ute
D
580071 3/2 way valve 1/4” normally closed 90° bi-stable
580074 5/2 way valve 24V 2w +/- 10% 1/8”
580075K 3/2 way valve 1/8” solenoidnormally opened
580078 3/2 way valve 1/8”with manual bi-stable
Electrical
580082 pressure gauge 0-10 bar
580084 3/2 way valve 1/8”normally closed/open
Pneumatic
580085K 5/2 way valve + connector complete
580086C 3/2 way valve 1/4” solenoid -40°/+100°C
580090 3/2 way valve normally closed M5 threaded
580109 5/2 way valve c/w toplever 522l 1/4” bistable
580LP1 axle lift valve
680 002 127 cable 16 m 2 cores c/w AspockSG1 connector 1 side only
41Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
ACCESSORIES
Miscellaneous
760 407 001 815 015 002 815 999 999 904 053 001 905 002 001 980 00000 0LP1
FSI20.050 N30200AE N30200AG RN55N
Part
nu
mb
er
Typ
e
Att
rib
ute
A
Att
rib
ute
B
Att
rib
ute
C
760 407 001 fitting case20 different PN of fittings for 77 fittings in total
3 different PN of RTC tools for 9 RTC tools in total
see picture for more details
815 015 002 sensor
815 999 999 sensor
904 053 001pressure regulating/setting tool
ILAS® III 352047.../ 352049.../ 352051...
905 002 001 leak detection spray
905 003 001 anti-freeze 1l
980 00000 0LP1 1st axle lift valve
FSI20.050 cylinder
N30200AE flexastik 40” c/w hose clamp
N30200AG flexastik 50” c/w hose clamp
RN55N repair kit pressure converter N4274
S21/15W hose clamp ø 21 mm
Acc
esso
ries
Double diaphragm spring brake actuators 44
Pressure converter 45
ACTUATION
43Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
44 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
ACTUATION
Double diaphragm spring brake actuators
Double diaphragm spring brake actuators
Double diaphragm cylinders are combined cylinders. The front section is dedicated to the service brake and the rear section to the spring brake. The front section is always a diaphragm type. In the rear section, the powerful spring is compressed during normal vehicle operation (driving). When parked, the pressure holding the spring in position is released. The spring then acts directly on the brake.
Part
nu
mb
er
Ver
sio
n
Push
ro
d
(mm
)
Pro
tect
ion
Yoke
Sid
e p
ort
Mo
un
tin
g
thre
ad
Bre
ath
er p
ipe
Sid
e p
ort
(d
egre
es)
Max
. o
per
atin
g
pre
ssu
re (
bar
)
Stro
ke
346 2430 001 24/30 M16x1.5 wiper c/w M16x1.5 M16x1.5 w/o +90 10 76
45Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
ACTUATION
Pressure converters
Part
nu
mb
er
Typ
e
Hyd
./ai
r ra
tio
Med
ium
Cu
bic
inch
d
isp
lace
men
t
Ap
plic
atio
n
No
te
Hyd
rau
lic
cylin
der
Ø
Pneu
mat
ic
cylin
der
Ø
Len
gth
Elec
tric
o
vers
tro
ke
ind
icat
ion
33090009 series II 16:1 brake fluid 5.0 Terex (N4185C) 1.12” 4.50” 17.25'' @ 93%
N4194 series I 23:1 brake fluid 8.8 1.25” 6.00” 22.70'' @ 75%
33090009 N4194
Part
nu
mb
er
Typ
e
Port
Cu
t-in
(b
ar)
Cu
t-o
ut
(bar
)
Term
inal
s
361 006 003 pressure switch M12x1.5 male screw
361 006 201 pressure switch M12x1.5 male 0.5 spade
361 006 301 pressure switch M12x1.5 male spade
361 006 302 pressure switch M12x1.5 male 5.5 spade
361 006 305 pressure switch M12x1.5 male 4.5 spade
361 006 306 pressure switch M12x1.5 male 2.5 spade
361 007 001 pressure switch M12x1.5 0.5 screw
361 007 002 pressure switch M12x1.5 1.0 screw
361 007 101 pressure switch M12x1.5 0.3 screw
361 007 104 pressure switch M12x1.5 5.0 screw
361 007 201 pressure switch M12x1.5 0.5 spade
361 007 206 pressure switch M12x1.5 spade
361 007 301 pressure switch M12x1.5 4.5 spade
361 007 302 pressure switch M12x1.5 5.0 spade
361 007 305 pressure switch M12x1.5 5.5 spade
Switches
Switches are used to activate electronic circuits such as pilot lights, acoustic control, electromagnetic valves etc...<br>A control switch in the brake system enables activation of the brake lights when the brakes are activated.
48 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR BRAKE
Switches
361 006 201 361 006 302 361 006 305 361 006 306 361 007 001 361 007 002
361 007 104 361 007 201 361 007 301 361 007 302 361 007 305
BRAKE ADJUSTERS
Manual brake adjusters 52
51Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
Manual brake adjusters
Manual brake adjusters are installed as the lever linking the actuator to the camshaft, in a drum brake system. Regular manual adjustment is required to maintain a constant clearance between the brake linings and the drum.
Part
nu
mb
er
Leve
r ty
pe
No
. of
splin
e te
eth
No
. of
ho
les
Bu
shin
g
Leve
r le
ng
th
(mm
)
Ap
plic
atio
n
A B I (o
ffse
t)
Splin
e ty
pe
Mec
han
ism
KN44051 straight 28 2 1/2'' 170 MERITOR 5.0'' 6.0''SAE 1 1/2''-28 C
posi lock
KN44061 straight 28 2 1/2'' 195 MERITOR 5.5'' 6.5''SAE 1 1/2''-28 C
posi lock
KN47081 straight 10 2 1/2'' 171 USA 6.0'' 5.0''SAE 1 1/2''-10
posi lock
KN49000 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/4''-10
posi lock
KN49010 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/4''-10
posi lock
KN50000 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/2''-10
posi lock
KN50010 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/2''-10
posi lock
52 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
BRAKE ADJUSTERS
Manual brake adjusters
KN44051 KN44061 KN47081
AIR DISC BRAKES
Disc brake pads 56
55Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
Part
nu
mb
er
Mar
ket
ref.
Bra
ke
ECE
R90
Len
gth
(m
m)
Hei
gh
t (m
m)
thic
knes
s (m
m)
nb
of
pad
s
191 0089 010 29087 Knorr SB/SN7 E11 90R-02A0393/32869 247 109.2 29.7 4
191 0309 010 29030 MERITOR D3/D-Elsa1 E11 90R-02A0393/32859 249.2 118 28 4
191 0889 020 29088 Wabco PAN 17 E11 90R-02A0393/32858 175.8 86 26 4
191 0959 010 29093 Knorr SB/SN6 E11 90R-02A0393/32868 210.5 92.5 29.8 4
191 1159 010 29183 Knorr SN5/SB5 E11 90R-02A0393/32860I: 173.3 O: 184.8
I: 84 O: 84
I: 26.8 O: 33.8
4
191 1229 020 29122 Brembo 2x60 E11 90R-02A0393/32857 174.8 85.4 21.8 4
191 1269 010 29126 Wabco PAN 19-1 E11 90R-02A0393/32867 210 92.4 29.7 4
191 1319 010 29131 MERITOR D-Elsa2 E11 90R-02A0393/32866 249.6 118 30 4
191 1589 010 29158Knorr SK / Knorr SB 4309T / WABCO PAN 22-1
E11 90R-02A0393/32865 210.65 108.1 29.2 4
191 1629 010 29162 Wabco Pan 22-1 Plus E11 90R-02A0393/32864 210.45 110 31.8 4
191 1659 010 29165 Knorr SB3745T (SB6) E11 90R-02A0393/32863 210.5 92.5 29.8 4
191 1679 010 29167 Knorr SB4345T (SN7) / BPW E11 90R-02A0393/32862 247 109.2 30 4
191 1719 010 29171 Knorr SB4309T (SK7) E11 90R-02A0393/32865 210.5 108 29.8 4
Disc brake pads
All pads have been through extensive testing and meet the ECE R90 standard, ensuring an original equipment quality and performance. Formulated to these standards Grau disc brake pads have been developed for aftermarket applica-tion, withstanding the rigours of heavy vehicle braking.
56 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
AIR DISC BRAKES
Disc brake pads
191 1269 010 191 1319 010 191 1589 010 191 1629 010 191 1659 010 191 1679 010
191 0089 010 191 0309 010 191 0889 020 191 0959 010 191 1159 010 191 1229 020
191 1719 010
FITTINGS
Straight male terminal-RTC 61
Straight male terminal 63
Adjustable elbow stud-RTC 65
Adjustable elbow stud 66
Adjustable tee stud-RTC 67
Adjustable tee stud 68
Adjustable tee stud with test point-RTC 69
Adjustable tee stud with test point 70
Union-RTC 71
Union 71
Tee union-RTC 72
Straight female terminal 73
Stud bulkhead terminal-RTC 73
Stud bulkhead terminal 74
Swivel elbow stud-RTC 74
Swivel elbow stud 75
Swivel stud with test point 75
Swivel tee stud 76
Swivel adaptor 77
Swivel stud 79
Swivel 80
Pivoted adaptor 82
Test point 85
Plug 86
Reducer 86
Adaptor 87
Bulkhead adaptor 89
Threaded adaptor bulkhead 90
Bulkhead elbow 91
Drain valve 91
Elbow hosetail 92
Hosetail 92
Male connector 93
Bulkhead male connector 93
Bulkhead union 94
Male elbow 94
Reinforcing insert for DIN tube 95
Stud-standpipe adaptor 95
RTC tool 96
FITTINGS
59Edition 1 Innovative Vehicle Solutions
Grau Product Catalogue Europe
60 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGS Straight male terminal-RTC
RTC fittings
RTC fittings offer the highest standards in safety, quality and reliability. They have been designed for use with 11/12 polyamide (Rilsan) or elastomeric polyester (Hytrel) tubing in the pneumatic circuits of truck and trailer auxiliary and braking systems. RTC is a ready-to-use safety fitting: simply insert the tubing by hand into the fitting. Estimated assembly time is 70-80 percent faster than for traditional cutting ring fittings.
› The tubing can be easily removed using a simple plastic tool
› The tubing tolerance complies with ISO 7628 and DIN 74324/73378
› The RTC operating heat range is -40°C to +100°C
› The seal under these conditions has been designed specifically for the RTC O-ring
Straight male terminal-RTC
Part numberTube ø (mm)
MH
(mm)B
(mm)L
(mm)Ch
(mm)Type
032 800 11000-RTC 6 x 4 10 x 1 19.8 7 31.3 18 A
032 800 14000-RTC 6 x 4 12 x 1.5 19.8 8 31.3 18 A
032 800 16000-RTC 6 x 4 16 x 1.5 19.8 8.5 23.5 22 B
032 800 17000-RTC 6 x 4 22 x 1.5 19.8 8.5 23.5 28 B
032 800 1G/18000-RTC 6 x 4 1/8'' 19.8 6 30.2 17 A
032 800 21000-RTC 8 x 6 10 x 1 20.5 5.5 30.4 18 A
032 800 24000-RTC 8 x 6 12 x 1.5 20.5 8 23.5 18 A
032 800 26000-RTC 8 x 6 16 x 1.5 20.5 8.5 24.4 22 B
032 800 27000-RTC 8 x 6 22 x 1.5 20.5 8.5 20.15 28 B
032 800 46000-RTC 10 x 7 16 x 1.5 24 8.5 36.45 22 A
032 800 47000-RTC 10 x 7 22 x 1.5 24 8.5 24.65 28 B
032 800 64000-RTC 10 x 8 12 x 1.5 24 8 36.45 18 A
Type A
Type B
61Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Straight male terminal-RTC
Fitt
ing
s
Part numberTube ø (mm)
MH
(mm)B
(mm)L
(mm)Ch
(mm)Type
032 800 66000-RTC 10 x 8 16 x 1.5 24 8.5 36.45 22 A
032 800 67000-RTC 10 x 8 22 x 1.5 24 8.5 24.65 28 B
032 800 94000-RTC 12 x 9 12 x 1.5 25 8 36 22 A
032 800 95000-RTC 12 x 9 14 x 1.5 25 8 36 22 A
032 800 96000-RTC 12 x 9 16 x 1.5 25 8.5 36 22 A
032 800 97000-RTC 12 x 9 22 x 1.5 25 8.5 26.6 28 B
032 800 98000-RTC 15 x 12 16 x 1.5 27 8.5 40 28 A
032 800 99000-RTC 15 x 12 22 x 1.5 27 8.5 40 28 A
Type A
Type B
62 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Straight male terminal-RTC
Straight male terminal
Part numberTube ø (mm)
MH
(mm)B
(mm)D
(mm)L
(mm)Ch
(mm)
032 800 12000 6 x 4 12 x 1 19.8 8 16 24.5 18
032 800 15000 6 x 4 14 x 1.5 19.8 9 - 24.5 20
032 800 1G/18000 6 x 4 1/8'' 19.8 6 16 24.5 16
032 800 G1/8000 8 x 6 1/8'' 20.5 6 18 25.5 18
032 800 21000 8 x 6 10 x 1 20.5 8 18 25.5 18
032 800 22000 8 x 6 12 x 1 20.5 8 18 25.5 18
032 800 25000 8 x 6 14 x 1.5 20.5 9 18 25.5 20
032 800 2G1/4000 8 x 6 1/4'' 20.5 6 18 25.5 20
032 800 44000 10 x 7 12 x 1.5 24 8 20 28.5 20
032 800 47000 10 x 7 22 x 1.5 24 9 20 29 28
032 800 55000 10 x 7.5 14 x 1.5 24 9 20 28.5 20
032 800 57000 10 x 7.5 22 x 1.5 24 9 20 29 28
032 800 61000 10 x 8 10 x 1 24 8 20 29.5 20
032 800 65000 10 x 8 14 x 1.5 24 9 20 28.5 20
032 800 86000 12 x 8 16 x 1.5 25 8.5 22 29.5 22
032 800 87000 12 x 8 22 x 1.5 25 9 22 29.5 28
032 800 107000 15 x 12 22 x 1.5 27 9 28 31.5 28
032 800 108000 15 x 12 16 x 1.5 27 8.5 28 33 28
63Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Straight male terminal
Fitt
ing
s
Part numberTube ø (mm)
MH
(mm)B
(mm)D
(mm)L
(mm)Ch
(mm)
032 800 116000 16 x 12 16 x 1.5 27 8.5 28 33 28
032 800 117000 16 x 12 22 x 1.5 27 9 28 31.5 28
032 800 11G1/2000 16 x 12 1/2" 27 - 28 - 28
032 800 126000 18 x 14 16 x 1.5 27 8.5 - 41.5 30
032 800 127000 18 x 14 22 x 1.5 27 9 - 40.5 30
032 800 137000 20 x 16 22 x 1.5 27 10 - 42.5 32
64 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Straight male terminal
Adjustable elbow stud-RTC
Part numberTube ø (mm)
M F L
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 800 16400-RTC 6 x 4 M16 x 1.5 M12 x 1.5 38.5 34 10 17 22
032 810 14400-RTC 6 x 4 M12 x 1.5 M12 x 1.5 38.9 34 10 17 17
032 810 24400-RTC 8 x 6 M12 x 1.5 M12 x 1.5 40.25 34 10 17 17
032 810 26400-RTC 8 x 6 M16 x 1.5 M12 x 1.5 40.25 34 10 17 22
032 810 27400-RTC 8 x 6 M22 x 1.5 M12 x 1.5 40.25 34 10 17 28
032 810 46400-RTC 10 x 7 M16 x 1.5 M12 x 1.5 44.2 34 10 17 22
032 810 66400-RTC 10 x 8 M16 x 1.5 M12 x 1.5 44.2 34 10 17 22
032 810 67400-RTC 10 x 8 M22 x 1.5 M12 x 1.5 44.2 34 10 17 28
032 810 94600-RTC 12 x 9 M12 x 1.5 M16 x 1.5 47 36 10 22 17
032 810 96600-RTC 12 x 9 M16 x 1.5 M16 x 1.5 47 36 10 22 22
032 810 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28
032 810 98600-RTC 15 x 12 M22 x 1.5 M16 x 1.5 50.3 36 10 22 28
65Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable elbow stud-RTC
Fitt
ing
s
Part numberTube ø (mm)
M F L
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 810 16400 6 x 4 M16 x 1.5 M12 x 1.5 40 34 10 17 22
032 810 46400 10 x 7 M16 x 1.5 M12 x 1.5 44 34 10 17 22
032 810 107600 15 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28
032 810 117600 16 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28
032 810 127700 18 x 14 M22 x 1.5 M22 x 1.5 56 41 10 24 28
Adjustable elbow stud
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 840 97700 12 x 9 M22 x 1.5 M22 x 1.5 49.5 39 10 24 28
032 840 117700 16 x 12 M22 x 1.5 M22 x 1.5 51.5 39 10 24 28
66 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable elbow stud
Part numberTube ø (mm)
M F L
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 841 27600 8 x 6 M22 x 1.5 M16 x 1.5 36.1 37 10 22 28
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 820 26400-RTC 8 x 6 M16 x 1.5 M12 x 1.5 40.25 34 10 17 22
032 820 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28
Adjustable tee stud-RTC
67Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable elbow stud Adjustable tee stud-RTC
Fitt
ing
s
Adjustable tee stud
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 820 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 10 17 28
032 820 97600 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28
032 820 117600 16 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28
Part numberTube ø (mm)
M F L
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 830 24400-RTC 8 x 6 12 x 1.5 12 x 1.5 40.25 34 10 17 17
032 830 26400-RTC 8 x 6 16 x 1.5 12 x 1.5 40.25 34 10 17 22
68 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable tee stud-RTCAdjustable tee stud
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 830 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 10 17 28
Adjustable tee stud with test point-RTC
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 823 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 45.5 10 28 22
318 058 001-RTC 12 x 9 M16 x 1.5 M16 x 1.5 47 36 45.5 10 22 22
69Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable tee studAdjustable tee stud with test
point-RTC
Fitt
ing
s
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 821 96600 12 x 9 M16 x 1.5 M16 x 1.5 47 36 45.5 10 22 22
Adjustable tee stud with test point
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 823 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 45.5 10 28 17
032 823 97600 12 x 9 M22 x 1.5 M16 x 1.5 47 36 45.5 10 28 22
70 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adjustable tee stud with test point
Union-RTC
Part number Tube ø (mm) H (mm) L (mm)
032 850 10400-RTC 6 x 4 19.8 38
032 850 20400-RTC 8 x 6 20.5 43.6
032 850 40400-RTC 10 x 7 24 50.6
032 850 60400-RTC 10 x 8 24 50.6
032 850 90600-RTC 12 x 9 25 54.5
Union
Part number Tube ø (mm) H (mm) L (mm)
032 850 30400 9 x 6 22.5 45
032 850 40400 10 x 7 25.5 51
032 850 70400 11 x 8 25.5 51
032 850 110600 16 x 12 27 58
032 850 120600 18 x 14 27 58
71Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Union-RTCUnion
Fitt
ing
s
Tee union-RTC
Part number Tube ø (mm) L1 (mm) L2 (mm) Ch (mm)
032 870 10400-RTC 6 x 4 26 26 13
032 870 20400-RTC 8 x 6 28.5 26 15
032 870 60400-RTC 10 x 8 33.5 31.5 18
032 870 90600-RTC 12 x 9 36 32 18
Part number Tube ø (mm) F L1 (mm) Ch1(mm) Ch2 (mm)
032 870 60400 10 x 8 M12 x 1.5 46.5 20 19
032 870 90600 12 x 9 M16 x 1.5 50 22 22
72 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
UnionTee union-RTC
Straight female terminal
Part numberTube ø (mm)
FH
(mm)B
(mm)L
(mm)Ch
(mm)
032 808 20600 8 x 6 M16 x 1.5 20.5 10 34 22
032 808 60600 10 x 8 M16 x 1.5 24 10 38 22
032 808 90600 12 x 9 M16 x 1.5 25 10 38.5 22
Stud bulkhead terminal-RTC
Part numberTube
ø (mm)
M FD
(mm)L
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)Ch3
(mm)
032 803 27400-RTC 8 x 6 M22 x 1.5 M12 x 1.5 19 59.7 9 15 32.7 28 24 18
032 803 96600-RTC 12 x 9 M16 x 1.5 M16 x 1.5 23 69.5 8.5 16 41.5 28 28 22
73Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Straight female terminalStud bulkhead terminal-RTC
Fitt
ing
s
Stud bulkhead terminal
Part numberTube ø (mm)
M FD
(mm)L
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)Ch3
(mm)
032 803 26400 8 x 6 M16 x 1.5 M12 x 1.5 19 60.5 9 15 45.5 22 24 18
032 803 27400 8 x 6 M22 x 1.5 M12 x 1.5 19 60.5 9 15 45.5 28 24 18
032 803 67400 10 x 8 M22 x 1.5 M12 x 1.5 19 63.5 9 15 48.5 28 24 20
032 803 96600 12 x 9 M16 x 1.5 M16 x 1.5 23 69.5 8.5 16 53.5 28 28 22
032 803 97600 12 x 9 M22 x 1.5 M16 x 1.5 23 68.5 9 15 53.5 28 28 22
Swivel elbow stud-RTC
Part numberTube ø (mm)
ML
(mm)L1
(mm)L2
(mm)Ch1 (mm)
032 815 16400-RTC 6 x 4 M16 x 1.5 41.4 33 8.5 22
032 815 24400-RTC 8 x 6 M12 x 1.5 42.75 32.5 8 18
032 815 96600-RTC 12 x 9 M16 x 1.5 49.5 35 8.5 22
032 815 97600-RTC 12 x 9 M22 x 1.5 49.5 36 9 28
74 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Stud bulkhead terminalSwivel elbow stud-RTC
Part numberTube ø (mm)
ML
(mm)L1
(mm)L2
(mm)Ch1
(mm)
032 815 16400 6 x 4 M16 x 1.5 32 32 42.5 22
032 815 24400 6 x 4 M12 x 1.5 32 31.5 42.5 18
032 815 26400 6 x 4 M16 x 1.5 32 32 42.5 22
032 815 200B 8 x 6 M12 x 1.5 32 31.5 - 18
032 815 900B 12 x 9 M12 x 1.5 36 31.5 20
032 815 94600 12 x 9 M12 x 1.5 36 31.5 50 20
032 815 117600 16 x 12 M22 x 1.5 39.5 34.5 53.5 28
Swivel elbow stud
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 826 96600 12 x 9M16 x
1.5M16 x
1.550 35.5 8.5 48.5 22 22
Swivel stud with test point
75Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel elbow studSwivel stud with test point
Fitt
ing
s
Part numberTube ø (mm)
M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 835 96600 12 x 9 M16 x 1.5 M16 x 1.5 36 32 50 22 22
Swivel tee stud
Swivel adaptor
Part number M F L
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 715 06600 M16 x 1.5 M16 x 1.5 20 35 8.5 22 22
76 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel tee studSwivel adaptor
Part number M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 725 04400 M12 x 1.5 M12 x 1.5 18 32.5 8 19 18
032 725 06600 M16 x 1.5 M16 x 1.5 20.5 35.5 8.5 22 22
032 725 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 22 28
Part number M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 735 04400 M12 x 1.5 M12 x 1.5 18 32.5 8 19 18
032 735 06600 M16 x 1.5 M16 x 1.5 20.5 35.5 8.5 22 22
032 735 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 22 29
77Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel adaptor
Fitt
ing
s
Part number M FL
(mm)L1
(mm)L2
(mm)Ch1
(mm)
032 749 04600 M12 x 1.5 M16 x 1.5 20.5 35 8 20
032 749 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 28
Part number M F L (mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 746 04600 M12 x 1.5 M16 x 1.5 20.5 35 8 22 20
Part number M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch2
(mm)
032 751 06600 M16 x 1.5 M16 x 1.5 20 40.5 8.5 35 16
78 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel adaptor
Swivel stud
Part number M L (mm) Ch (mm) S (mm)
032 660 B01/4GAS000 1/4'' 6 20 5.5
032 66B 001/8GAS000 1/8'' 7 20 5.5
032 660 B04000 M12 x 1.5 8 20 5.5
032 660 B05000 M14 x 1.5 9 20 5.5
032 660 B06000 M16 x 1.5 8.5 22 5.5
032 660 B07000 M22 x 1.5 9 28 6
Swivel
Part number F L (mm)
032 615 B00600 M16 x 1.5 20
79Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel studSwivel
Fitt
ing
s
Part number F L (mm) Ch (mm)
032 625 00600 M16 x 1.5 20.5 22
Part number F L (mm) Ch (mm)
032 635 00600 M16 x 1.5 20.5 22
Part number F L (mm) L1 (mm) Ch (mm)
032 645 B00600 M16 x 1.5 14.5 17.5 22
80 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel
Part number F L (mm) Ch (mm)
032 646 00600 M16 x 1.5 20.5 22
Part number F L (mm) L1 (mm)
032 647 B00600 M16 x 1.5 19 20.5
Part number F L (mm)
032 649 B00600 M16 x 1.5 20.5
81Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Swivel
Fitt
ing
s
Pivoted adaptor
Part number M F L (mm)L1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 710 01400 M10 x 1 M12 x 1.5 31.5 9 15.5 17 14
032 710 03300 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17
032 710 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 14 17
032 710 06400 M16 x 1.5 M12 x 1.5 34 10 15.5 17 22
032 710 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 14 22
032 710 07400 M22 x 1.5 M12 x 1.5 34 10 15.5 17 28
032 710 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28
032 710 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 22 28
82 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Pivoted adaptor
Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)
032 720 04400 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17
032 720 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 22 17
032 720 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 22 22
032 720 07400 M22 x 1.5 M12 x 1.5 34 10 15.5 17 28
032 720 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28
032 720 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 24 28
Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)
032 730 04400 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17
032 730 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 22 17
032 730 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 22 22
032 730 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28
032 730 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 24 28
83Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Pivoted adaptor
Fitt
ing
s
Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)
032 740 06600 M16 x 1.5 M16 x 1.5 34.5 10 16.5 22 22
Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)
032 742 06600 M16 x 1.5 M16 x 1.5 37 10 19 22 22
032 742 07600 M22 x 1.5 M16 x 1.5 36 10 19 22 28
Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)
032 741 06600 M16 x 1.5 M16 x 1.5 36 10 20.5 22 22
032 741 07600 M22 x 1.5 M16 x 1.5 36 10 20.5 22 28
84 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Pivoted adaptor
Part number M F L1 (mm) L3 (mm) L4 (mm) L5 (mm) Ch2 (mm) Ch3 (mm)
032 743 06600 M16 x 1.5 M16 x 1.5 10 38 35 20 22 16
032 743 07600 M22 x 1.5 M16 x 1.5 10 38 35 20 28 16
Test point
Part number M L (mm) L1 (mm) Ch (mm)
032 790 04000 12 x 1.5 39 9 18
032 790 06000 16 x 1.5 37 9 22
318 056 001 16 x 1.5 female 45 10.8 22
032 790 07000 22 x 1.5 37 9 28
85Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Pivoted adaptorTest point
Fitt
ing
s
Plug
Part number M L (mm) Ch
032 695 04000 12 x 1.5 9 18
0326956 16 x 1.5 8.5 22
0326957 22 x 1.5 8.5 28
Reducer
Part number M F L (mm) Ch (mm) Type
032 696 04400 12 x 1.5 12 x 1.5 9 17 B
032 696 06400 16 x 1.5 12 x 1.5 9 22 A
032 696 07400 22 x 1.5 12 x 1.5 8.5 28 A
032 696 A6G1/8 1/8'' 16 x 1.5 9 22 A
032 024 409 22 x 1.5 1/4”-18-NPT 8.5 28 A
032RID76LA 22 x 1.5 16 x 1.5 9 28 A
Type A
Type B
Type A Type B
86 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
PlugReducer
Adaptor
Part number F L Ch1
032 750 0600 M16 x 1.5 22 22
032 750 0700 M22 x 1.5 26 28
Part number F L Ch
032 770 0400 M12 x 1.5 18 19
032 770 0500 M16 x 1.5 20.5 22
032 770 0700 M22 x 1.5 27.5 16
87Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adaptor
Fitt
ing
s
Part number F L1 (mm) Ch2 (mm)
032 780 0500 16 x 1.5 20.5 22
Part number F L Ch
032 760 0400 M12 x 1.5 18 19
032 760 0600 M16 x 1.5 20.5 15
88 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Adaptor
Bulkhead adaptor
Part number M M1 FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 703 3GC14 1/4'' M18 x 1.5 M12 x 1.5 32 6 20 6 22 24
032 703 5GC14B M1/4 M16 x 1.5 - 32 6 19.5 10 20 22
032 703 076100ML M22 x 1.5 M16 x 1.5 M10 x 1 35 9 20 6 28 22
032 703 077600ML M22 x 1.5 M22 x 1.5 M16 x 1.5 39 9 24 6 28 28
032 703 079400ML M22 x 1.5 M18 x 1.5 M12 x 1.5 35 9 20 6 28 24
Part number M F1 F2L
(mm)L1
(mm)Ch1
(mm)Ch2
(mm)
032 753 07600 M22 x 1.5 M16 x 1.5 M16 x 1.5 30 24 28 28
032 753 09400 M18 x 1.5 M12 x 1.5 M12 x 1.5 26 20 22 24
89Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Bulkhead adaptor
Fitt
ing
s
Part number M M1 FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 703 066100M M16 x 1.5 M16 x 1.5 M10 x 1 34 8.5 20 10 22 22
032 703 067600M M16 x 1.5 M22 x 1.5 M16 x 1.5 40 8.5 24 10 28 28
032 703 07600 M22 x 1.5 M22 x 1.5 M16 x 1.5 41 9 24 10 28 28
Threaded adaptor bulkhead
Part number M M1L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)
032 GMM 67LACA M16 x 1.5 M22 x 1.5 20 25 45 - -
032 GMM 77LACA M22 x 1.5 M22 x 1.5 20 25 45 19 28
90 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Threaded adaptor bulkhead
Bulkhead elbow
Part number M FL
(mm)L1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)Ch3
(mm)
032 763 07600 M22 x 1.5 M16 x 1.5 20.5 24 44 - 22 28 -
032 763 06600 M16 x 1.5 M16 x 1.5 20.5 37 56 10 22 22 22
Drain valve
Part number ML
(mm)L1
(mm)Ch
(mm)Note
315 019 021 M22 x 1.5 24.5 9 28 w/o ring
315 019 031 M22 x 1.5 24.5 9 28 c/w ring
420 101 782 M22 x 1.5 22.8 9 28 automatic
91Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Bulkhead elbowDrain valve
Fitt
ing
s
Elbow hosetail
Part number MTube ø (mm)
032 056 909 M16 x 1.5 10
Hosetail
Part numberTube ø (mm)
MD
(mm)d
(mm)L
(mm)L1
(mm)L2
(mm)Ch
(mm)
032 0326 9766 9 M16 x 1.5 11.5 10 46.5 32 8.5 22
032 697 176 12 M16 x 1.5 14.5 13 54.5 38 8.5 22
032 697 177 12 M22 x 1.5 14.5 13 51 35 8.5 28
032 699 176 13 M16 x 1.5 - - - - - -
92 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Elbow hosetailHosetail
Male connector
Part numberTube ø (mm)
ML1
(mm)L2
(mm)Ch1
(mm)Ch2
(mm)
032 DMM 137LACP 20 M22 x 1.5 14 32 27 32
032 DMM 96LACP 12 M16 x 1.5 12 27 22 22
032 800 21/8N10 18 - - - - -
Bulkhead male connector
Part numberTube ø (mm)
ML1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)Ch3
(mm)
032 PDM 107LACA 15 M22 x 1.5 46 12 20 27 27 28
032 PDM 96LACA 12 M16 x 1.5 41.5 12 20 22 22 24
93Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Male connectorBulkhead male connector
Fitt
ing
s
Part numberTube ø (mm)
L1 (mm)
L2 (mm)
Ch1 (mm)
Ch2 (mm)
Ch3 (mm)
032 DMM IDP8LACA 12 25 44 24 22 24
Bulkhead union
Male elbow
Part numberTube ø (mm)
ML1
(mm)L2
(mm)L3
(mm)Ch1
(mm)Ch2
(mm)Ch3
(mm)
032 TPG 96LACA 12 M16 x 1.5 32 20 25 17 22 32
032 TPG 137LACA 20 M22 x 1.5 42 26 25 24 32 28
032 TPG 137LACP 20 M22 x 1.5 42 26 25 24 32 28
94 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
Bulkhead unionMale elbow
Reinforcing insert for DIN tube
Part number Tube ø (mm)
4201768 12 x 9
4201782 20 x 16
Stud-standpipe adaptor
Part numberTube ø (mm)
M L1 (mm) L2 (mm) Ch (mm) Ch1 (mm)
032 ORM 97LA 12 22 x 1.5 12 29 27 22
95Edition 2 Innovative Vehicle Solutions
Grau Product Catalogue Europe
FITTINGSFITTINGS
Reinforcing insert for DIN tubeStud-standpipe adaptor
Fitt
ing
s
RTC tool
Part number Tube ø (mm)
RT006 6 x 4
RT008 8 x 6
RT010 10 x 7; 10 x 7.5; 10 x 8
RT012 12 x 9
RT015 15 x 12; 16 x 12
96 Innovative Vehicle Solutions Edition 2
Grau Product Catalogue Europe
FITTINGSFITTINGS
RTC tool
Innovative Vehicle Solutions www.haldex.com
Haldex develops and provides reliable and innovative solutions focused on brake and air suspension products to the global commercial vehicle industry.In 2017, the company had net sales of approximately SEK 4.4 billion and employed2,176 people.
AustriaHaldex Wien Ges.m.b.H. Vienna Tel.: +43 1 8 69 27 97 Fax: +43 1 8 69 27 97 27 E-Mail: [email protected]
Australia Haldex Brake Products Pty Ltd Victoria Tel.: +61 3 9579 7070 Fax: +61 418 170 879
BelgiumHaldex N.V. Balegem Tel.: +32 9 363 90 00 Fax: +32 9 363 90 09 E-Mail: [email protected]
BrazilHaldex do Brasil Ind. E Com. Ltda São José dos Campos Tel.: +55 12 3935 4000 E-Mail: [email protected]
CanadaHaldex Ltd Cambridge, Ontario Tel.: +1 519 621 6722 Fax: +1 519 621 3924
ChinaHaldex Vehicle Products Co. Ltd. Suzhou Tel.: +86 512 8885 5301 Fax: +86 512 8765 6066 E-Mail: [email protected]
FranceHaldex Europe SAS Weyersheim Tel.: +33 3 88 68 22 00 Fax: +33 3 88 68 22 09 E-Mail: [email protected]
GermanyHaldex Brake Products GmbH Heidelberg Tel.: +49 6 221 7030 Fax: +49 6 221 703400 E-Mail: [email protected]
HungaryHaldex Hungary Kft Szentlörinckáta Tel.: +36 29 631 400 Fax: +36 29 631 401 E-Mail: [email protected]
IndiaHaldex India Private limited Nashik Tel.: +91 253 66 99 501 Fax: +91 253 23 80 729
©2018, Haldex AB. This material may contain Haldex trademarks and third party trademarks, trade names, corporate logos, graphics and emblems which are the property of their respective companies. The contents of this document may not be copied, distributed, adapted or displayed for commercial purposes or otherwise without prior written consent from Haldex.
006
700
073_
EN /1
1.18
/Hal
dex
EU
R
ItalyHaldex Italia Srl. Lissone Tel.: +39 039 47 17 02 Fax: +39 039 27 54 309 E-Mail: [email protected]
KoreaHaldex Korea Ltd. Seoul Tel.: +82 2 2636 7545 Fax: +82 2 2636 7548
MexicoHaldex de Mexico S.A. De C.V. Monterrey Tel.: +52 81 8156 9500
PolandHaldex Sp. z.o.o. Praszka Tel.: +48 34 350 11 00 Fax: +48 34 350 11 11 E-Mail: [email protected]
RussiaOOO “Haldex RUS” Moscow Tel.: +7 495 747 59 56 Fax: +7 495 786 39 70 E-Mail: [email protected]
SpainHaldex España S.A. Granollers Tel.: + 34 93 84 07 239 Fax: + 34 93 84 91 218 E-Mail: [email protected]
SwedenHaldex Brake Products AB Landskrona Tel.: +46 418 47 60 00 Fax: +46 418 47 60 01 E-Mail: [email protected]
United KingdomHaldex Ltd. Newton Aycliffe Tel.: +44 1325 310 110 Fax: +44 1325 311 834 E-Mail: [email protected]
Haldex Brake Products Ltd. MIRA Technology Park Tel: +44 2476 400 300 Fax: +44 2476 400 301 E-Mail: [email protected]
USAHaldex Brake Products Corp. Kansas City Tel.: +1 816 891 2470 Fax: +1 816 891 9447 E-Mail: [email protected]
Top Related