7/30/2019 Elcometer Protective Coating Inspection Kit 6 Datasheet
1/2
www.elcometer.com
Datasheet
DFT
Fineness of
Grind, Density
Flow & Dip Cups
Rotational Viscosity
Flash Point, Impact Testers
Washability & Abrasion Testers
Film Applicators, Bend Testers, GlossThickness Gauges, Surface Profile, Wet FilmDry Film, Coating Thickness Gauges
Climatic Testing, Adhesion, Pinhole TestersPorosity, Software, Dispersion, Inspection Kits
Zahn Cups, Motorised Film ApplicatorsDrying Time Recorders, Washability, Abrasion
Scratch & Hardness, Elasticity & Deformation
Surface Cleanliness,DOI Gloss MetersColour, Moisture, Dewpoint Meters
Cross-Hatch, Oven Recorders
Surface Contamination
ElcoMaster
ElcometerProtective Coating Inspection Kit 6
www.elcometer.com
ENGLAND
Elcometer Limited
Manchester M43 6BU
Tel: +44 (0)161 371 6000
Fax: +44 (0)161 371 6010
e-mail: [email protected]
FRANCE
Elcometer Sarl
45430 Bou
Tel: +33 (0)2 38 86 33 44
Fax: +33 (0)2 38 91 37 66e-mail: [email protected]
USA
Elcometer Inc
Rochester Hills Michigan 48309
Tel: +1 248 650 0500
Toll Free: 800 521 0635
Fax: +1 248 650 0501
e-mail: [email protected]
GERMANY
Elcometer Instruments GmbH
D-73431 Aalen
Tel: +49(0)7361 52806 0
Fax: +49(0)7361 52806 77
e-mail: [email protected]
REPUBLIC OF SINGAPORE
Elcometer (Asia) Pte Ltd
Singapore 589472,
Tel: +65 6462 2822
Fax: +65 6462 2860
e-mail: [email protected]
BELGIUM
Elcometer SA
B-4681 Hermalle /s Argenteau
Tel: +32 (0)4 379 96 10
Fax: +32 (0)4 374 06 03
e-mail: [email protected]
JAPAN
Elcometer KK
Nisso Dai 23 Building, Room 804,
3-8-25, Toranomon, Minato-ku,Tokyo 105-0001
Tel: +81-3-6869-0770
Fax: +81-3-6809-1442
e-mail: [email protected]
THE NETHERLANDS
Elcometer NL
3584 BH Utrecht
Tel: +31 (0)30 210.7005
Fax: +31 (0)30 210.6666
email: [email protected]
7/30/2019 Elcometer Protective Coating Inspection Kit 6 Datasheet
2/2
www.elcometer.com
Datasheet
Protective Coating Inspection Kit 6Elcometer
Technical Specifcation
Part NumberMetric
Imperial
Description
YKIT-PROTECTIVE-6M YKIT-PROTECTIVE-6E Elcometer Protective Coatings Kit 6
Dimensions 575 x 475 x 205mm (22.64 x 18.70 x 8.07)
The Elcometer Protective Coatings Inspection Kit 6 is a comprehensive kit which
incorporates all the key gauges and inspection accessories required to assess astructure before, during and after coating has been applied.
Measurement parameters include:
Material thickness Climatic conditions
Surface inspection Coating thickness
Weld inspection Adhesion
Surface cleanliness Pinhole detection
Surfaceprole
Contents
STANDARDS:
AS 1580.108.2, AS 1580.408.4, AS 2331.1.4, AS 3894.2, AS 3894.3-B, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, AS 3894.9, AS/NZS 1580.107.3,
AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 2200, ASTM D 3359-B, ASTM D 4138-A, ASTM D 4414-A,
ASTM D 4417-C, ASTM D 5162-A, ASTM D 7091, ASTM E 376, ASTM E 797, ASTM G 12, ASTM G6, ASTM G62-A, BS 3900-C5-5B,
BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, BS 7793-2, DIN 50981, DIN 50984,
DIN 50986, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, EN 15317, IMO MSC.215(82), IMO MSC.244(83), ISO 1461, ISO 14654, ISO 16276-2,
ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-12, ISO 2808-1A, ISO 2808-5B, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C,
ISO 2808-7D, ISO 8289-A, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-5, JIS K 5600-1-7, JIS K 6766,
NACE RP 0188,NACE RP0287, NACE SP 0188, NACE TM0384, NF T30-038,NF T30-123,NF T30-124, NF T30-125, SANS 5772, SS 184159, SS 55900,
SSPC Guide 15, SSPC PA 2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000
Model Description Kit 6
Elcometer 204 Steel Ultrasonic Thickness Gauge
Elcometer 128 Pictorial Standards1
Elcometer 131/1C Telescopic Inspection Mirror
Elcometer 137 IlluminatedMagnier
Elcometer 144 Paint Safe Marker Pens (Pack of 3)
Elcometer 147 Weld Gauge
Elcometer 142 Dust Tape Test Kit
Elcometer 138 Bresle Salt Kit
Elcometer 138/2 Surface Contamination Kit
Elcometer 122 Testex Tape, Coarse & Extra Coarse
Elcometer 124 Thickness Gauge
Elcometer 224 DigitalSurfaceProleSeparateGauge&StandardSeparateProbe Model T
Elcometer 319 Digital Dewpoint Meter, with Magnetic Surface Probe Top
Elcometer 112 Hexagonal Wet Film Comb: 25 - 3000m (1 - 120mils)
Elcometer 456Separate Digital Coating Thickness Gauge
with F2 Standard Probe
Ferrous
Model T
Elcometer 121 Paint Inspection Gauge (Top) with Cross Hatch Cutters
6 x 1, 2 & 3mm & ISO (ASTM) Adhesive Tape
Top
Elcometer 270 Pinhole Detector (9 , 67.5 & 90V)
ElcoMaster2.0data management software
supplied with available with
wireless technology
compatible with
ElcoMastermobile app
Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit, US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit Supplied with Bresle Samplers not Bresle Patches
Top Related