drum andcontainer pumps
We deliver values.
2
FLUX pumps: Perfection in pumping
Do you want to transfer differing liquids quickly and economically? Do you want to measure out varying quantities?Do you want to ensure total safety for the operator or the environment when pumping hazardous products?Do you want a pump which can cope even with peak loadings?Drum and Container pumps are used in almost every sector of the processing and manufacturing industries.Initially designed for decanting and transfer operations of differing liquids from drums and containers, current production time scales are now requiring these pumps to be used on applications with extended run times and frequent stopping and starting.
Whenever liquids are pumped out of a drum or container, FLUX can supply a unit of unsurpassed quality: all FLUX pumps are available in different materials. You can choose between a pump with a mechanical seal or a sealless version. One of the unique features of both, the polypropylene and the PVDF mechanical seal version, is the steel cored inner tube providing, through increased lateral stability, a longer service life. Both, mixed centrifugal and axial impellers are available to suit differing head and flow appli-cations. And if you want to combine the pumping and mixing operation FLUX also have the pump you need.
Another feature is the FLUX quick assembly system.This allows for simple and speedy pump strip down.
Of course, FLUX pumps require a powerful and reliable drive motor. A wide range of electric or compressed air motors provides a matched power unit throughout the pump range – even inhazardous locations or when pumping highly flammable liquids.To complete the comprehensive FLUX program, a wide rangeof top class accessories is available – from protection againstemission of noxious vapours through to the volumetric measurement of liquids.
For further information to our pre-configureddrum-pump kits see our brochure FLUX pump kits
3
Table of contents
Which material goes best with which liquid
Design concepts of FLUX drumand container pumps
FLUX drum pumps (pump tube sets) in stainless steel (S), aluminium alloy (AL)and Hastelloy C (HC) in detail,together with performance charts
FLUX drum pumps (pump tube sets)in polypropylene (PP) andpolyvinylendene fluoride (PVDF) in detail,together with performance charts
FLUX container pump (pump tube set)in polypropylene (PP) in detail,together with performance chart
FLUX drum and container pumpsfor horizontal use FLUX quick action coupling
FLUX motor data in detail
Summary of FLUX motor –pump combination
Outline of FLUX drum andcontainer pumps with accessories
Dimensions of FLUX drum pumpsand drive motors
4
5 – 9
10 – 13
14 – 17
18
19
20 – 27
28 – 29
30 – 31
32 – 34
4
FLUX drum and container pumps –which material goes best with which liquid
stainless steel 1.4571/316 Ti (S) up to 100 °CSuitable for highly flammable liquids (up to tempera-tures of class T4) as well as for all neutral and non-flammable, thin liquids like solvents, organic acids, dilute anorganic acids and alkalis.certified for use in Zone 0*.Examples of suitable liquids: acetone, alcohol, ammo-nia, petrol, flammable solvents, nitrocellulose varnishes, perchlorethylene, trichlorethylene, toluene, potassic alkali, soda alkali, phosphoric acid (up to 60 %), sul-phuric acid (up to 7,5 % and more than 96 %), fruit juices, milk, salad oil andall liquids listed for aluminium alloy.
hastelloy C (HC) up to 120 °CSpecially designed for pumping alternatively highly flammable and chemically aggressive liquids. certified for use in Zone 0*.Examples of suitable liquids: hydrofluoric acid,aqua regia, oleum, hydrochloric acid (up to 30 %),sulphuric acid, various mixed acids and all liquidslisted for aluminium alloy and stainless steel.
aluminium alloy AlMg5 (AL) up to 100 °CSuitable for neutral, hardly flammable liquids.Examples of suitable liquids: drilling emulsion, diesel oil, fuel oil, hydraulic oil, non-flammable solvents, liquid soap, liquid wax, water.
polypropylene (PP) up to 50 °CSuitable for both, chemically aggressive and neutral liquids, together with hardly flammable liquids suchas acids and alkalis.Examples of suitable liquids: formic acid, ammonia,boric acid, chromic acid (up to 10 %), liquid fertilizers,acetic acid, photo developers, hydrofluoric acid (up to 70 %), fruit acids, potassic alkali, copper chloride, lac-tic acid, soda alkali, phosphoric acid, hydrochloric acid,sulphuric acid (up to 80 %), distilled water.
polyvinylendene fluoride (PVDF) up to 100 °CSuitable for both, chemically aggressive and neutral liquids, together with hardly flammable liquids such asacids and alkalis. Examples of suitable liquids: hydrobromic acid, chro- mic acid, chloric acid, hydrofluoric acid, sodium hypo- chlorite, nitric acid (up to 75 %), sulphuric acid and all liquids listed for polypropylene (except soda alkali).
*Zone 0 Area in which a hazardous and explosive atmosphere of gases, vapours or fogs exists permanently or for a long period of time. In general such conditions exist inside of drums or containers only.The following pump models are tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for transferring highly flammable liquids out of portable drums or containers in hazardous areas:
F 424 S – EC Type examination certificate PTB 11 ATEX 5009 X
F 425 S – EC Type examination certificate PTB 11 ATEX 5009 X
F 426 S – EC Type examination certificate PTB 11 ATEX 5009 X
F 430 S – EC Type examination certificate PTB 11 ATEX 5009
F 430 HC – EC Type examination certificate PTB 00 ATEX 4110 X
In selecting a pump model, please always check material of pump and material of seals for compatibility.
Due to the enormous variety and complexity of industrial chemicals, together with the range and variation of FLUX products, we can only list some of all the suitable liquids. But we would be glad to send you a detailed Resistance Chart.
A FLUX drum pump is always a˝Two-Component-Team˝ consisting of a drive motor and a pump (tube set). Both component parts are universally interchangeable. For further details please see page 10 onwards.
5
The sealless FLUX F 424
The liquids to be pumped areabrasive, but they do not leaveany deposits. Dry running of the pump must not cause any pro-blems. You are looking for a lightweight, general purpose pump in stainless steel, poly- propylene or polyvinylendene fluoride.
The inner tube supports the pump shaft, which is lubricated by the liquid. The level of the liquid in the inner tube always corresponds to that in the drum or container.
Special advantages:– Safe dry running of the pump– No wearing of seals– The liquid being pumped is
not contaminated by the shaft lubricant
– Inner tube and helix shaped support bearings completely self-draining
Here a FLUX pump in seallessversion is your pump.
Non-metallic helixshaped shaft support bearing
Impeller in ETFE
Flexible couplingbetween motorand pump
Pressure relief ports
Bottom bearing assembly which centers the shaft within the inner tube
O-ring to seal between inner and outer tube (not in the liquid section)
Radial shaft seals toprevent liquid and/or vapours entering thecoupling area
Type F 424
Explosion-proof versions available
1
1
6
The FLUX F 430 with mechanical seal
Type F 430
The pump must be used with many varying liquids, conse-quently the smallest residual left within the pump is unacceptable.You want to pump adhesive sub- stances like paints or liquids which tend to crystallize orharden.
The inner tube houses the shaft.It is sealed at the bottom by a mechanical seal through which the shaft passes. Consequently the shaft does not come intocontact with the liquid exceptfor the small section betweenthe impeller and seal.
Special advantages:– The shaft support bearings
are isolated from the liquid– Steel cored inner tube in PP
and PVDF pumps. This pre- vents elongation of the plastics, even at high temperatures
– Extended service life through well proven seal design
Here a FLUX pump withmechanical seal is the bestchoice.
Steel cored inner tube in PP and PVDF pro-vides the ultimate in stability. This core prevents elongationof the plastics at hightemperatures. This results in an extended service life of the mechanical seal
Packaging of themechanical seal and rotary shaft seal adjacent to eachother ensures the maximum integrity of the sealed inner tube
Flexible couplingbetween motor and pump
Impeller in ETFE
3A-certified products available
2Products complying with EC 1935/2004 and EU 10/2011 available
1
Explosion-proof versions available
3
1
2
3
7
The FLUX F 425 for emptying drums up to 99,98 %
You are not prepared to accept any residual liquid in the drum in order to avoid problems and costs of disposal or to avoid losing high value liquids.
Before the motor is switched off, the flowback stop valve at the pump inlet must be closed by operating the lever. This prevents the liquid flowing back into the empty drum.
Special advantages:– Especially easy operating of
the pump– Optimum use of the liquids– Remains of less than 0,05 l
Here the FLUX F 425 foremptying drums up to 99,98 % is your pump.
Flexible couplingbetween pump and motor
Operating leversto close/openthe flowback stop valve
Packaging of themechanical seal androtary shaft seal adjacent to each other ensures the maximum integrity of the sealed inner tube
Flowback stop valve
Type F 425
Flowback stop valveclosedopen
Impeller in ETFE
Explosion-proof versions available
1
1
8
The FLUX mixing pump F 426
mixing pumping
Type F 426
You want to mix and pump liquids within a closed drum or an open container.
By turning the adjusting lever, the pump can either mix or pump. Liquids can also be mixed even when being transferred toanother container.
Special advantages:– No changes in the outer
diameter of the pump tube in stainless steel as the pump works without any additional components
– Light and handy design– Pump/drum connection glands
are also in vapour-proof version available
Here the FLUX mixing pump is the right pump for you.
Flexible couplingbetween pump and motor
Mixing openings
Packaging of the mechanical seal and rotary shaft seal adjacent to each other ensures the maximum integrity of the sealed inner tube
Adjusting lever to setthe pump to mixing ordischarge
Impeller in ETFE
1
Explosion proof versions available
1
9
The FLUX F 427 can be taken apart completely
Type F 427
You want a safe pumping of food, cosmetic or pharmaceutical products. The operating condi-tions require an easy and quick cleaning or sterilization of the pump at regular intervals to avoid any contamination of the product, e.g. when pumping varying liquids or different colours as well as quick-drying or film forming liquids.
Special advantages:– All wetted parts are made of
stainless steel, PTFE or ETFE– The pump can be quickly
stripped down for cleaning or sterilization
– Negligible wear by friction on seals and bearings
Here a FLUX sanitary pumpis your pump.
Clamp connection
FLUX facilitates aseptic pumping of delicate products. The sanitary pump can be stripped down- within a few seconds because of its ingenious design.The F 427 does not have any inaccessible voids. This allows you to completely clean the pump at any time.
Easy to strip down– Easy to clean!
3A-certified products available
2Products complying with EC 1935/2004 and EU 10/2011 available
1
1
2
Relief opening
Plug-in bearing
Outer tube
Inner tube
Shaft
Bearing housing
Impeller
10
FLUX drum pumps in stainless steel
FLUX drum pumps in stainless steel 316 Ti – except sanitary pump F 427 S – are approved according to ATEX-Directive 94/9/EC for usein Zone 0, temperature class T4, for transferring highly flammable liquids out of portable drums or containers.
With the help of the performance charts you can compare the delivery rates achieved by each pump model powered by the various FLUX motors. Detailed motor data are shown on pages 21 to 29.
When using the pump with a discharge hose(of approx. 6,5 ft) and a quick action tap, the delivery rate will be approx. 18 GPM.Depending on the motor type a 55 GAL drumcan be emptied within 3 – 4 minutes.The delivery rates shown in the performance charts are obtained at the outlet connection of the pump.
Special version for horizontal use on request.
motor FBM 4000 Ex
Detailed motor data see pages 21 to 29
Max. viscosity per pump and motor,please see pages 28 and 29.
This pump version will achievea higher delivery rate!
This pump version will achievea higher delivery head!
FP 4
24 E
x S-
43/3
8 w
ith z
one
sepa
ratio
n
motor F 416 Ex, F 416-1 Ex or F 416-2 Ex
FEM 4070
F 416 Ex
F 414
F 416-2 Ex
F 458F 458 ELF 458-1
F 460 ExF 460 Ex ELF 460-1 Ex
FBM 4000 Ex
F 457F 457 EL
FEM 4070
motor FEM 4070
0 40 80 120 1600
4
8
12
16
20
24
0 10 20 30
0
10
20
30
40
50
60
70
0 10 20 30 40
H [m
WS
]
H [f
t]
11
motor F 458-1 or F 460-1 Exmotor F 458, F 458 EL, F 460 Ex or F 460 Ex EL
Values ± 10% with water (68 °F) and a voltage of 230 Volt. Curves with a voltage of 120 Volt / 60 Hz are similar.
drum pump (tube set) in stainless steel, thread on outlet G 1¼ male, motors on page 21type/curve FP 424 Ex S-43/38(1 FP 424 Ex S-43/37 Z(1 FP 424 Ex S-50/45 Z(1
version
seal type sealless within the liquid section
material shaft in stainless steel 316 Ti, impeller in ETFE, o-ring in FKM
max. temperature 212 °F
outer-Ø 111∕16˝ 111∕16˝ 2˝
part no. / weight
immersion length 27˝ 424 22 007 / 4,85 Ibs 424 22 107 / 4,85 Ibs 424 22 207 / 6,61 Ibs
immersion length 39˝ 424 22 010 / 6,39 Ibs 424 22 110 / 6,39 Ibs 424 22 210 / 8,81 Ibs
immersion length 47˝ 424 22 012 / 7,27 Ibs 424 22 112 / 7,27 Ibs 424 22 212 / 10,6 Ibs
type/curve FP 425 Ex S-41/34(1,2 F 426 S-41/38 F 427 S3-43/38
version 99,98 % drum emptying mixing pump sanitary pump
seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM sealless within the liquid section
material shaft in stainless steel 316 Ti, seal in FKM, impeller in ETFE shaft in stainless steel 316 Ti, impeller in ETFE, o-ring in FKM
max. temperature 212 °F
outer-Ø 119∕32˝ 119∕32˝ 111∕16˝
part no. / weight
immersion length 27˝ 425 22 008 / 6,61 Ibs – 427 20 307 / 6,61 Ibs
immersion length 39˝ 425 22 011 / 8,37 Ibs 426 20 010 / 8,37 Ibs 427 20 310 / 6,39 Ibs
immersion length 47˝ 425 22 013 / 9,70 Ibs 426 20 012 / 9,70 Ibs 427 20 312 / 7,27 Ibs
type/curve F 430 S-41/38(1 F 430 S-41/37 Z(1 F 430 S-50/45 Z
version
seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
material shaft in stainless steel 316 Ti, seal in FKM, impeller in ETFE
max. temperature 212 °F
outer-Ø 119∕32˝ 119∕32˝ 2˝
part no. / weight
immersion length 27˝ 430 20 107 / 5,29 Ibs 430 20 407 / 5,29 Ibs 430 20 207 / 7,49 Ibs
immersion length 39˝ 430 20 110 / 6,61 Ibs 430 20 410 / 6,61 Ibs 430 20 210 / 9,92 Ibs
immersion length 47˝ 430 20 112 / 7,93 Ibs 430 20 412 / 7,93 Ibs 430 20 212 / 11,46 Ibs
accessories hose connection complete with nut G 1¼ female DN 19 part no. 959 04 061 DN 25 part no. 959 04 041
Pump models in immersion lengths of 8 – 118˝ (in steps of 4˝) on request 2 Model for higher delivery head on request.
motor F 457 or F 457 EL
1 with zone separation
12
FLUX drum pumps in aluminium alloy and hastelloy C
Detailed motor data see pages 21 to 29
motor FBM 4000 Ex motor F 416 Ex, F 416-1 Ex or F 416-2 Ex
F 416 Ex
F 414
F 416-2 Ex
F 458F 458 ELF 458-1
F 460 ExF 460 Ex ELF 460-1 Ex
FBM 4000 Ex
F 457F 457 EL
FEM 4070
FLUX drum pumps in aluminium alloy AlMg5 are suitable for transferringneutral, hardly flammable liquids.
FLUX drum pumps in hastelloy C are appro-ved according to ATEX-Directive 94/9/EC for use in Zone 0, temperature class T4, for transferring highly flammable liquids out of portable drums or containers. In addition, hastelloy C is chemically resistant to most of acids and alkalis, allowing the most univer-sal use of this pump type.
With the help of the performance charts you can compare the delivery rates achieved by each pump model poweredby the various FLUX motors. Detailed motor data are shown on pages 21 to 29.
When using the pump with a discharge hose (of approx. 6,5 ft) and a quick action tap, the delivery rate will be approx.18 GPM. Depending on the motor typea 55 GAL drum can be emptied within3 – 4 minutes.The delivery rates shown in the performance charts are obtained at the outlet connection of the pump.
F 43
0 A
L-41
/38
F 43
0 H
C-4
0/38
motor FEM 4070
0 40 80 120 1600
4
8
12
16
20
24
0 10 20 30
0
10
20
30
40
50
60
70
0 10 20 30 40
H [m
WS
]
H [f
t]
Drum Pump (tube set) in Aluminium Alloy, thread on outlet G 1¼ A (BSP 1¼˝ male), motors on page 21
Drum pump (tube set) in Hastelloy C, thread on outlet G 1¼ A, (BSP 1¼˝ male), without motor
Type/Curve F 430 AL-41/38 F 430 AL-41/37 Z F 430 AL-50/38
Version
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in NBR
Material shaft in Stainless Steel 316 Ti, seal in NBR, impeller in ETFE
Max. temperature 212 °F (for short periods)
Outer-Ø 119∕32˝ 119∕32˝ 2˝
Part No. / Weight
Immersion length 27˝ 430 10 107 / 2,64 lbs 430 10 407 / 2,64 lbs 430 10 307 / 3,30 lbs
Immersion length 39˝ 430 10 110 / 3,30 lbs 430 10 410 / 3,30 lbs 430 10 310 / 3,96 lbs
Immersion length 47˝ 430 10 112 / 3,74 lbs 430 10 412 / 3,74 lbs 430 10 312 / 4,63lbs
Type/Curve F 430 HC-40/38
Version
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FFKM
Material shaft in Hastelloy C, seal in FFKM, impeller in ETFE
Max. temperature 248 °F
Outer-Ø 19∕16˝
Part No. / Weight
Immersion length 27˝ 430 30 107 / 5,07 lbs
Immersion length 39˝ 430 30 110 / 6,61 lbs
Immersion length 47˝ 430 30 112 / 7,71 lbs
Pump models in immersion lengths of 8 – 78˝ (in steps of 4˝) on request.
Other immersion lengths on request.
13Values ± 10% with water (68 °F) and a voltage of 230 Volt. Curves with a voltage of 120 Volt / 60 Hz are similar.
motor F 458-1 or F 460-1 Exmotor F 457 or F 457 EL motor F 458, F 458 EL, F 460 Ex or F 460 Ex EL
Max. viscosity per pump and motor,please see pages 28 and 29.
This pump version will achievea higher delivery rate!
This pump version will achievea higher delivery head!
14
FLUX drum pumps in polypropylene
motor FBM 4000 Ex motor F 416 Ex, F 416-1 Ex or F 416-2 Ex
FLUX drum pumps in polypropylene are used for chemically and aggressive liquids such as acids and alkalis, together with most thin and neutral liquids.
With the help of the performance charts you can compare the delivery rates achieved by each pump model poweredby the various FLUX motors.Detailed motor data are shown on pages 21 to 29.
When using the pump with a discharge hose (of approx. 6,5 ft) and a quick action tap, the delivery rate will be approx.18 GMP.Depending on the motor type a 55 GAL drum can be emptied within 3 – 4 minutes.The delivery rates shown in the performance charts are obtained at the outlet connection of the pump.
Special version for horizontal use on request.
F 43
0 PP
-40/
33
F 457F 457 EL
F 414
FEM 4070
F 458F 458 ELF 458-1
F 416 Ex F 416-2 Ex
F 460 ExF 460 Ex ELF 460-1 Ex
FBM 4000 Ex
Detailed motor data see pages 21 to 29.
Max. viscosity per pump and motor,please see pages 28 and 29.
This pump version will achievea higher delivery rate!
This pump version will achievea higher delivery head!
motor FEM 4070
15
motor F 458-1 or F 460-1 Exmotor F 458, F 458 EL, F 460 Ex or F 460 Ex EL
Values ± 10% with water (68 °F) and a voltage of 230 Volt. Curves with a voltage of 120 Volt / 60 Hz are similar.
motor F 457 or F 457 EL
Type/Curve F 424 PP-41/36 F 424 PP-41/35 Z F 424 PP-50/38 F 424 PP-50/43 Z
Version
Seal type sealless within the liquid section
Material shaft in Hastelloy C, impeller in ETFE, o-ring in FKM
Max. temperature 122 °F
Outer-Ø 119∕32˝ 119∕32˝ 2˝ 2˝
Part No. / Weight
Immersion length 27˝ 424 40 007 / 1,76 lbs 424 40 107 / 1,76 lbs 424 40 207 / 1,98 lbs 424 40 307 / 1,98 lbs
Immersion length 39˝ 424 40 010 / 2,20 lbs 424 40 110 / 2,20 lbs 424 40 210 / 2,86 lbs 424 40 310 / 2,86 lbs
Immersion length 47˝ 424 40 012 / 2,64 lbs 424 40 112 / 2,64 lbs 424 40 212 / 3,53 lbs 424 40 312 / 3,53 lbs
Type/Curve F 430 PP-40/33 F 430 PP-40/33 Z F 430 PP-50/43 Z F 430 PP-50/38
Version
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
Material shaft in Hastelloy C, seal in FKM, impeller in ETFE
Max. temperature 122 °F
Outer-Ø 19∕16˝ 19∕16˝ 2˝ 2˝
Part No. / Weight
Immersion length 27˝ 430 40 107 / 2,42 lbs 430 40 407 / 2,42 lbs 430 40 207 / 2,42 lbs 430 40 307 / 2,42 lbs
Immersion length 39˝ 430 40 110 / 3,08 lbs 430 40 410 / 3,08 lbs 430 40 210 / 3,30 lbs 430 40 310 / 3,30 lbs
Immersion length 47˝ 430 40 112 / 3,53 lbs 430 40 412 / 3,53 lbs 430 40 212 / 3,75 lbs 430 40 312 / 3,75 lbs
Accessories Hose connection complete with nut G 1¼ DN 19 Part No. 959 04 053 DN 25 Part No. 959 04 052
Type/Curve F 425 PP-50/34 F 426 PP-50/33
Version 99,98 % drum emptying mixing pump
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
Material shaft in Hastelloy C, seal in FKM, impeller in ETFE
Max. temperature 122 °F
Outer-Ø 2˝ 2˝
Part No. / Weight
Immersion length 27˝ 425 40 048 / 3,53 lbs –
Immersion length 39˝ 425 40 051 / 4,41 lbs 426 40 001 / 3,97 lbs
Immersion length 47˝ 425 40 053 / 5,07 lbs 426 40 002 / 4,63 lbs
Drum Pump (tube set) in Polypropylene, thread on outlet G 1¼ A (BSP 1¼˝ male), motors on page 21
Pump models in immersion lengths of 8 – 118˝ mm (in steps of 4˝) on request.
16
FLUX drum pumps in polyvinylidene fluoride
FLUX drum pumps in polyvinylidene fluoride are used for both chemically aggressive and hardly flammable liquids such as acids and alkalis, together with most thin and neutral liquids.
With the help of the performance charts you can compare the delivery rates achieved by each pump model powered by the various FLUX motors.Detailed motor data are shown on pages 21 to 29.
When using the pump with a discharge hose (of approx. 6,5 ft) and a quick action tap, the delivery rate will be approx.18 GPM.Depending on the motor type a55 GAL drum can be emptied within3 – 4 minutes.The delivery rates shown in the performance charts are obtained at the outlet connection of the pump.
F 42
4 PV
DF-
41/3
6
F 416 Ex F 416-2 Ex
F 460 ExF 460 Ex ELF 460-1 Ex
FBM 4000 Ex
Detailed motor data see pages 21 to 29.
F 457F 457 EL
F 414
F 458F 458 ELF 458-1
FEM 4070
motor FBM 4000 Ex motor F 416 Ex, F 416-1 Ex or F 416-2 Ex
motor FEM 4070
Max. viscosity per pump and motor,please see pages 28 and 29.
This pump version will achievea higher delivery rate!
This pump version will achievea higher delivery head!
17
Values ± 10% with water (68 °F) and a voltage of 230 Volt. Curves with a voltage of 120 Volt / 60 Hz are similar.
motor F 458-1 or F 460-1 Exmotor F 458, F 458 EL, F 460 Ex or F 460 Ex EL
motor F 457 or F 457 EL
Drum Pump (tube set) in Polyvinylidene fluoride, thread on outlet, G 1¼ A (BSP 1¼˝ male), motors on page 21Type/Curve F 424 PVDF-41/36 F 424 PVDF-41/35 Z F 424 PVDF-50/38
Version
Seal type sealless
Material shaft in Hastelloy C, impeller in ETFE, o-ring in FKM
Max. temperature 176 °F
Outer-Ø 119∕32˝ 119∕32˝ 2˝
Part No. / Weight
Immersion length 27˝ 424 60 007 / 2,42 lbs 424 60 107 / 2,42 lbs 424 60 207 / 3,08 lbs
Immersion length 39˝ 424 60 010 / 3,08 lbs 424 60 110 / 3,08 lbs 424 60 210 / 4,18 lbs
Immersion length 47˝ 424 60 012 / 3,53 lbs 424 60 112 / 3,53 lbs 424 60 212 / 4,85 lbs
Type/Curve F 430 PVDF-40/33 F 430 PVDF-40/33 Z F 430 PVDF-50/43 Z F 430 PVDF-50/38
Version
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
Material shaft in Hastelloy C, seal in FKM, impeller in ETFE
Max. temperature 176 °F
Outer-Ø 19∕16˝ 19∕16˝ 2˝ 2˝
Part No. / Weight
Immersion length 27˝ 430 60 107 / 3,08 lbs 430 60 407 / 3,08 lbs 430 60 207 / 3,08 lbs 430 60 307 / 3,75 lbs
Immersion length 39˝ 430 60 110 / 3,75 lbs 430 60 410 / 3,75 lbs 430 60 210 / 3,75 lbs 430 60 310 / 4,63 lbs
Immersion length 47˝ 430 60 112 / 4,41 lbs 430 60 412 / 4,41 lbs 430 60 212 / 4,41 lbs 430 60 312 / 5,51 lbs
Accessories Hose connection with nut G 1¼ DN 19 Part No. 959 04 101 DN 25 Part No. 959 04 102
Pump models in immersion lengths of 8 – 118˝ (in steps of 4˝) on request.
18
FLUX container pump in polypropylene in detail
The powerful, extremely lightweight and easy-to-handle solution for transferring corrosive acids and alkalis and almost every thin and hardly flammable liquid out of larger containers: FLUX container pump type F 430 PP-100/50 in polypropylene. Especially designed for emptying 250 GAL-Containers, this pump provides the high safety and ease of handling you do appreciate on FLUX drum pumps.
The use of this pump allows to dispense with floor drains, to mini-mize leakage risks and to eliminate residual liquid within suction pipes and subsequent handling cost. A compression gland or a vapour-proof gland always secures the pump in a vertical position within the dome of the container.
Depending on the motor type, this pump will achieve a maximum delivery rate of 28 GPM and a maximum delivery head of 105 ft liquid column in transferring liquids up to a maximum viscosity of 150 mPas (cP).
F 457
F 414
F 458-1
FLUX container pumpF 430 PP-100/50in combination with
1 = Commutator motor Type F 457/F 458-1
2 = Three-phase gearmotor Type F 414
detailed motor datasee pages 21 to 29
Values ± 10% with water (68 °F) and a voltage of 230 Volt. Curves with a voltage of 120 Volt / 60 Hz are similar.
F 43
0 PP
-100
/50
Container pump (tube set) in Polypropylene, thread on outlet G 1¼ A (BSP 1¼” male), motors on page 21Type F 430 PP-100/50
Version with impeller
Seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
Material shaft in Hastelloy C, seal in FKM, impeller in Polypropylene
Max. temperature 122 ° F
Outer-Ø 4˝ on the pump body
Part No./Weight
Immersion length 39” 430 40 510 / 5 lbs
Immersion length 47” 430 40 512 / 5 lbs
Immersion length 60” 430 40 515 / 6 lbs
Accessories Hose connection with nut G 1¼ DN 25 Part No. 959 04 052 DN 32 Part No. 959 04 054
19
centrifugal pumps for horizontal and vertical use
Dimensions
centrifugal pumps for horizontal and vertical usetype F 430 S-41/38 TR F 430 PP-40/33 TR
seal type mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
mechanical seal in ceramic oxide, PTFE/carbon, o-rings in FKM
material stainless steel 1.4571, seal in FKM, impeller in ETFE
polypropylene, shaft in hastelloy C, seal in FKM, impeller in ETFE
dimensions see dimensional drawing
max. temperature 212 °F 122 °F
outer-Ø 119∕32˝ 19∕16˝
part no. / weight 430 20 002 / 3 Ibs 430 40 002 / 1,3 Ibs
type part no.
quick action coupling SSK 400 complete
consisting of threaded ring (motor side) and clamping element (pump side)
001 10 802
or as individual parts:
threaded ring to be screwed onto the drive motor 001 10 800
clamping element to be mounted onto the pump tube set 001 10 804
hose connections complete for inlet
material stainless steel with brass nut G 2 female
polypropylene with nut G 2 female
DN 32 959 04 059 959 04 010
DN 38 959 04 060 959 04 011
You will find the suitable motors and performance charts for the pump F 430 S-41/38 TR on page 10 and 11,for the pump F 430 PP-40/38 TR on page 14 and 15.
F 430 S TR
FLUX quick action coupling SSK 400
FLUX Quick Action Coupling Type SSK 400 suits all FLUX drum and container pumps Type F 424, F 425, F 426, F 427 and F 430 and allows a quick assembly/disassembly of pump and motor within a few seconds only. This allows the use of several pump tube sets with one drive motor only. The quick action coupling SSK 400 consists of a clamping element which is mounted onto the pump tube set and a threaded ring which is screwed onto the drive motor.
F 430 S-41/38 TR F 430 PP-40/33 TR
20
21
FLUX brushless motor FBM 4000 Exin detail
The brushless motor type FBM 4000 Ex is featuring a compact design, a robust double shell housing in aluminium and a very low noise level. The explosion-proof motor is tested and certified according to the latest ATEX-Directive 94/9/EC.EC-Type-Examination Certificate PTB 10 ATEX 1054 X.The combined on/off switch and easy to use speed controller allow precise dispensing operations.Electronic monitoring of speed, voltage and temperature.An integral no-volt release monitors the power and prevents unintentional re-start of the pump. This feature ensures additional safety for the user.Due to negligible wear, the brushless motor design guarantees lowest cost of ownership, even with continuous use.
Accessories
Brushless motor, explosion-proof to II 2G Ex d e IIC T6 / T5 Gb, protection class I. Jet-proof according to IP 55. With power supply cable, 16˝ long, with safety plug (not explosion-proof).
type capacity voltage frequency weight part no. version
with no-volt release safety circuit
FBM 4000 Ex 600 W 230 V 50-60 Hz 13,66 Ibs 400 01 000
part no.
System CEAG System Stahl
CEE Explosion-proofplug
explosion-proof to II 2 G Ex de (ia) II C T6 / T5, 3-pole, 220-240 Volt, jet-proof to IP 55
937 01 030 937 01 018
CEE Explosion-proofsocket
explosion-proof to II 2 G Ex de (ia) II C T6 / T5, 3-pole, 220-240 Volt,jet-proof to IP 55
937 50 041 937 50 022
Earth (ground) wire with crocodile clip
13 ft long6 ft long, reinforced version
931 90 023931 90 015
sarrying handle allowing easy immersion and removal of the pump 001 10 557
22
FLUX commutator motor F 460 Ex in detail
Explosion-proof commutator motor type F 460 Ex featuring a compact design, a robust double shell housing in aluminium and a very low noise level. Tested and certified according to ATEX-Directive 94/9/EC.Type F 460 Ex EL, 230 volt, with infinitely variable speed control included in the switch knob for an easy control of the delivery rate.EC-Type-Examination Certificate PTB 10 ATEX 1053 X.An improved ventilation system provides optimal coolingand ensures an extended service life.Additional safety by an integral no-volt release to prevent from any unintentional re-starting after a voltage discontinuity.
The commutator motor Type F 460-1 Ex is identical with Type F 460 Ex, but has a considerably higher capacity of 700 watt. This model is recommended for applications requiring a higher delivery rate or when transferring medium viscosity products or liquids with a higher density.
120 V, 60 Hz version UL-listed, File No. E67399, class I,group C + D.
F 460 Ex (pict)F 460 Ex ELF 460-1 Ex
Commutator motor, explosion-proof to II 2 G Ex d e IIC T6 / T5 Gb, protection class I in 230, 240 or 110 volt,protection class III in 42, 24 or 12 volt. Jet-proof according to IP 55, version with novolt release, with power supply cable, 16˝ long, with safety plug (not explosion-proof). – 42, 24 and 12 volt version without plug.
230 Volt version, approved to VDE / GS standards.Other voltages and/or frequencies on request.
Type Capacity Voltage Frequency Weight Part No. Version
with variable speed control
without variable speed control
F 460 Ex UL 460 W 120 V 60 Hz 11,24 lbs – 460 00 031
F 460 Ex 460 W 230 V 50 – 60 Hz 11,24 lbs – 460 00 026
F 460 Ex 410 W 24 V DC 11,24 lbs – 460 00 003
F 460 Ex 230 W 12 V DC 11,24 lbs – 460 00 004
F 460 Ex EL 230 W 230 V 50 Hz 11,24 lbs 460 00 028 –
F 460-1 Ex UL 700 W 120 V 60 Hz 13,00 lbs – 460 01 024
F 460-1 Ex 700 W 230 V 50 – 60 Hz 13,00 lbs – 460 01 001
Accessories Part No.
Earth (ground) wire with crocodile clip
6 ft long, reinforced version13 ft long
931 90 015931 90 023
Carrying handle allowing easy immersion and removal of the pump in combinationwith commutator motors Type F 460 Ex, F 460 Ex EL, F 460-1 Exor FBM 4000 Ex.
001 10 557
23
Commutator motor, special corrosion-resistant painting, protection class I bei 240, 230 and 110 volt.Protection class III in 24 or 12 volt, jet-proof according to IP 55, with novolt release, power supply cable 16˝ longand safety plug. – 24 and 12 volt version without plug.
Commutator motor type F 458 featuring a compact design, a robust double shell housing in aluminium and a very low noise level. Type F 458 EL, 230 volt, with infinitely variable speed control included in the switch knob for an easy control of the delivery rate. An improved ventilation system provides optimal cooling and ensures an extended service life.Totally enclosed, fan cooled motor design and special corrosion-resistant painting, making these models parti-cularly suitable for use in corrosive, vapour laden atmospheres.Additional safety by an integral no-volt release to prevent from any unintentional re-starting after a voltage discontinuity.
The commutator motor Type F 458-1 is identical with Type F 458, but has a considerably higher capacity of 700 watt.This model is recommended for applications requiring a higher delivery rate or when transferring products with a medium viscosity or liquids with a higher density.
120 V, 60 Hz version approved to CSA standards,File No. LR 39984-7.
F 458 (pict)F 458 ELF 458-1
FLUX commutator motor F 458 in detail
For transferring highly flammable liquids and for use in hazardous areas explosion-proof motors must be used.
Note:230 volt version, approved to VDE / GS standards.Other voltages and/or frequencies on request.
Accessories see page 21.
Type Capacity Voltage Frequency Weight Part No. Version
with variable speed control
without variable speed control
F 458 CSA 460 W 120 V 60 Hz 11,24 lbs – 458 00 026
F 458 460 W 230 V 50 – 60 Hz 11,24 lbs – 458 00 025
F 458 410 W 24 V DC 11,24 lbs – 458 00 003
F 458 230 W 12 V DC 11,24 lbs – 458 00 004
F 458 EL 460 W 230 V 50 Hz 11,24 lbs 458 00 027 –
F 458-1 CSA 700 W 120 V 60 Hz 13,00 lbs – 458 01 021
F 458-1 700 W 230 V 50 – 60 Hz 13,00 lbs – 458 01 020
Accessories Part No.
Carrying handle allowing easy immersion and removal of the pump in combinationwith commutator motors Type F 458, F 458 EL or F 458-1
001 10 557
24
FLUX commutator motor F 457 in detail
F 457 (pict)F 457 EL
The strongest drum pump motor with 800 watt. Collector motor in compact design with very good air cooling, low noise level and long service life. Optionally available with an integrated undervoltage trigger that prevents an uncon-trolled start and therefore guarantees optimum safety.
The F 457 EL motor also has an easy to operate electronic speed setting to control the pumping volume.
230 volt version, approved to VDE / GS standards.other voltages and/or frequencies on request.
Commutator motor F 457double isolated according to protection class II, IP 24 splash-proof,with power supply cable, 16˝ long and 2-pole plug.
Other voltages and/or frequencies on request.
Type Capacity Voltage Frequency Weight Part No. Version
with no-volt release, with variable speed control
with no-volt release, without variable speed control
F 457 800 W 120 V 60 Hz 8,82 lbs – 457 01 000
F 457 EL 800 W 120 V 60 Hz 8,82 lbs 457 01 001 –
F 457 800 W 230 V 50 – 60 Hz 8,82 lbs – 457 01 037
F 457 EL 800 W 230 V 50 – 60 Hz 8,82 lbs 457 01 003 –
Accessories Part No.
Carrying handle allowing an easy immersion and removal of the pump.In combination with commutator motor F 457 or F 457 EL
001 10 533
25
FEM 4070
For transferring highly flammable liquids and for use in hazardous areas explosion-proof motors must be used.
Note:
Commutator motor FEM 4070double isolated according to protection class II, IP 24 splash-proof, with electronic and thermal overload protection, electronic adjustable power pack with 4 speed ranges, 16˝ cable and plug.
With progressively controllable speed for various pumping volu-mes and a concentrated power of 500 watt. It can be combined with all FLUX barrel pumps. The ergonomically shaped handle allows safe single-handed operation of the rotary switch to start the pump and the setting knob to adjust the speed. The following features are the FEM 4070 advantages:
– Optimum overload protection in all speed ranges– With integrated undervoltage trigger to prevent an unintentional start after a temporary loss of power– Integrated suspension option– Compact design– Low weight– Low noise level– Long service life
FLUX commutator motor FEM 4070 in detail
230 volt version, approved to VDE / GS standards.
Type Capacity Voltage Frequency Weight Part No. Version
with novolt release without novolt release
FEM 4070 500 W 120 V 60 Hz 5,8 lbs 407 01 012 407 01 013
FEM 4070 500 W 230 V 50 – 60 Hz 5,8 lbs 407 01 023 –
26
FLUX three-phase gearmotor F 414 in detail
The robust three-phase gearmotor F 414 is especiallydesigned for extreme operating conditions and extendedoperating periods.
F 414
Values ± 10% with water (68 °F) and a voltage of 230 Volt.
motor F 414 in combination with drum pump in stainless steel
motor F 414 in combination withdrum pump in PP and PVDF
motor F 414 in combination with drum pump in aluminium and hastelloy C
Three-phase gearmotor, protection class I, jet-proof to IP 55, available with motor protection switch or with cable terminal box, without power supply cable.
type capacity voltage fFrequency range of setting motor protection switch
weight part no. version
with motor protec-tion switch, moun-ted on the motor
without motor pro-tection switch, with cable terminal box
F 414 0,55 kW 230/400 V 50 Hz 0,9 – 1,6 A 19/18 Ibs 414 01 112 414 01 110
F 414 0,75 kW 230/400 V 50 Hz 1,5 – 2,5 A 25/23 Ibs 414 01 137 414 01 136
F 414 1,1 kW 230/400 V 50 Hz 2,4 – 3,5 A 28/26 Ibs 414 01 139 414 01 138
accessories: part no.
carrying handle allowing an easy immersion and removal of the pump in combination with the three-phase Gearmotor F 414
001 10 582
power supply cable 16˝ long, complete with Cekon plug, 5-pole 934 08 020
power supply cable 16˝ long, without plug 934 08 025
power supply cable yard ware 934 08 901
cekon plug 5-pole 937 01 014
27
FLUX air motors F 416 Ex in detail
In combination with air motors FLUX drum and container pumps are very lightweight, easy to handle and extremely powerful at the same time.FLUX air motors are explosion-proof according to ATEX-Directive 94/9/EC. PTB Registration No. 02 ATEX D022-1.These motors are recommended for transferring highly flammable liquids and are particularly suitable for appli-cations requiring a powerful and easy to adjust motor.The speed can be adjusted via the filter-regulator-lubricator unit on models F 416 Ex and F 416-1 Ex or on a ball valve on model F 416-2 Ex.
Power at 86 psi operating pressure – 470 watt.Power at 43 psi operating pressure – 170 watt.
F 416 Exwith triggeroperated valve
F 416-2 Exwith ball valve
F 416-1 Exwithout valve
Air motor, explosion-proof to II 2 G c IIC T6, easily variable speed control by adjusting either the air supply pressure or volume, motor overload-proof, air connection G ¼ (BSP ¼˝ female).
type capacity operating pressure max.
air consumption version weight part no.
F 416 Ex 470 W 86 psi 17 cfm with trigger operated valve
3,10 lbs 416 00 122
F 416-1 Ex 470 W 86 psi 17 cfm without valve 2,00 lbs 416 00 125
F 416-2 Ex 470 W 86 psi 17 cfm with ball valve 2,20 lbs 416 00 030
accessories: part no.
filter-regulator lubricator unit consisting of water separator, pressure gauge and lubricator. Thread on inlet and outlet G ¼ (BSP ¼˝ female)
001 10 100
compressed air hose DN 10, electrically conductive (blue) 001 10 098
hose coupling brass, spring-actuated, with hose nozzle DN 10 for compressed air hose 959 13 066
nipple brass, DN 10 – G ¼ A (BSP ¼˝ male) for hose coupling 959 13 065
hose nozzle brass, DN 10 – G ¼ A (BSP ¼˝ male) for compressed air hose 959 05 022
earth (ground) wire with crocodile clip
20 ft long9,8 ft long, reinforced version
931 90 023931 90 015
28
Capacity range
Pump tube set Type
Motor Type
Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity rate* head** max. rate* head** max. rate* head** max. rate* head** max. rate* rate** max. rate* head** max. rate* head** max. GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP
29 57 1000 26 46 1000 30 62 900 30 39 1000 32 79 1200 28 52 800 32 66 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
32 75 800 34 62 900 38 82 900 42 69 1000 38 98 1200 – – – 40 85 900
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
29 57 1000 26 46 1000 30 62 900 30 39 1000 32 79 1200 28 52 800 32 66 1000
29 26 800 30 26 800 30 33 900 26 23 1000 34 43 1200 28 24 800 32 36 900
32 75 800 34 62 900 38 82 900 42 69 1000 38 98 1200 – – – 40 85 900
F 430 S-41/37 Z
F 430 S-41/38
F 430 S-50/38
F 430 S-50/45 Z
F 424 S-43/38
F 424 S-43/37 Z
F 424 S-50/45 Z
F 425 S-41/34
FBM 4000 Ex F 458 F 460 Ex F 458 EL F 460 Ex EL F 458-1 F 460-1 Ex
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
29 57 1000 26 46 1000 30 62 800 30 39 1000 32 79 1200 28 52 800 32 66 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
22 51 1000 22 49 1000 24 66 900 24 36 1000 26 79 1200 22 59 600 24 66 1000
42 34 800 45 31 800 50 39 900 38 33 1000 54 43 1200 43 31 600 50 39 800
29 26 800 24 23 1000 29 33 900 24 26 1000 29 39 1200 28 24 800 32 36 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
28 98 1000 25 75 1000 29 92 900 28 69 1000 28 98 1200 26 85 800 29 98 900
22 51 1000 22 49 1000 24 66 900 24 36 1000 26 79 1200 22 59 800 24 66 1000
46 36 800 45 31 800 50 39 900 38 33 1000 54 43 1200 43 31 600 50 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 43 33 600 58 39 800
33 98 1000 25 75 1000 29 92 900 28 69 1000 28 98 1200 26 85 800 29 98 900
42 34 800 45 31 800 50 39 900 38 33 900 54 43 1200 43 31 800 50 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
Values ± 10 % with water (68 °F) and a voltage of 230 Volt. * Maximum delivery rate with free outlet; obtained on the outlet connection. ** Maximum delivery head with closed outlet; obtained on the outlet connection.
F 430 PP/PVDF-50/43 Z
F 430 PP/PVDF-50/38
F 430 PP/PVDF-40/33 Z
F 430 PP/PVDF-40/33
F 430 HC-40/38
F 430 AL-50/38
F 430 AL-41/37 Z
F 430 AL-41/38
F 427 S3-43/38
F 426 S-41/38
F 426 PP-50/33
F 425 PP-50/34
F 424 PP-50/43 Z
F 424 PP/PVDF-50/38
F 424 PP/PVDF-41/35 Z
F 424 PP/PVDF-41/36
29
Motor Type
Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity Delivery Delivery Viscosity rate* head** max. rate* head** max. rate* head** max. rate* head** max. rate* rate** max. rate* head** max. rate* head** max. GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP GPM ft cP
29 57 1000 26 46 1000 30 62 900 30 39 1000 32 79 1200 28 52 800 32 66 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
32 75 800 34 62 900 38 82 900 42 69 1000 38 98 1200 – – – 40 85 900
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
29 57 1000 26 46 1000 30 62 900 30 39 1000 32 79 1200 28 52 800 32 66 1000
29 26 800 30 26 800 30 33 900 26 23 1000 34 43 1200 28 24 800 32 36 900
32 75 800 34 62 900 38 82 900 42 69 1000 38 98 1200 – – – 40 85 900
F 414
F 416 Ex F 416-1 Ex
F 416-2 Ex FEM 4070 F 457 F 457 EL
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
29 57 1000 26 46 1000 30 62 800 30 39 1000 32 79 1200 28 52 800 32 66 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
22 51 1000 22 49 1000 24 66 900 24 36 1000 26 79 1200 22 59 600 24 66 1000
42 34 800 45 31 800 50 39 900 38 33 1000 54 43 1200 43 31 600 50 39 800
29 26 800 24 23 1000 29 33 900 24 26 1000 29 39 1200 28 24 800 32 36 1000
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
28 98 1000 25 75 1000 29 92 900 28 69 1000 28 98 1200 26 85 800 29 98 900
22 51 1000 22 49 1000 24 66 900 24 36 1000 26 79 1200 22 59 800 24 66 1000
46 36 800 45 31 800 50 39 900 38 33 1000 54 43 1200 43 31 600 50 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 43 33 600 58 39 800
33 98 1000 25 75 1000 29 92 900 28 69 1000 28 98 1200 26 85 800 29 98 900
42 34 800 45 31 800 50 39 900 38 33 900 54 43 1200 43 31 800 50 39 800
58 36 800 53 31 800 58 39 700 49 36 900 63 43 1000 57 33 600 58 39 800
Values ± 10 % with water (68 °F) and a voltage of 230 Volt. * Maximum delivery rate with free outlet; obtained on the outlet connection. ** Maximum delivery head with closed outlet; obtained on the outlet connection.
30
general view FLUX drum and container pump with accessories for highly flammable liquids (explosion-proof version)
It is not merely the pump that makes the FLUX solution a perfect equipment. On this page you will find a general view on the explosion-proof FLUX drum pump together with all accessories for transferring highly flammable liquids. With all items in bold printing you will have a ready to use pump assembly, which may be completed by other accessories shown on this page.
drive motor
drum pump (pump tube set)
FLUX-clip
suction strainer
compression gland
fume gland type FES
flexible hose*
swaged hose fittings*
quick action tap
discharge spout
liquid meter
connecting piece FMC 100
carrying handle
earth (ground) wire
explosion-proof plug
explosion-proof socket
wall bracket
* On request also available completely mountedand tested for electrical conductivity.
1
2
3
4
56
78
9
10
11
12
13 14
16
15
8
17
1 10
2 11
3 12
4 13
5 14
6 15
7 16
8 17
9
31
general view FLUX drum and container pumpwith accessories for non-flammable liquids
It is not merely the pump that makes the FLUX solution a perfect equipment. On this page you will find a general view on the FLUX drum pump together with all accessories for transferring non-flammable liquids. With all items in bold printing you will have a ready to use pump assembly, which may be completed by other accessories shown on this page.
drive motor
drum pump (pump tube set)
FLUX-clip
suction strainer
compression gland
fume gland type FES
hose connection
flexible hose*
hose clip
quick action tap
discharge spout
liquid meter
carrying handle
quick action coupling type SSK 400
attachment clamp
wall bracket
1
2
3
4
56
7
910
11
12
13
14
1615
89
1 9
2 10
3 11
4 12
5 13
6 14
7 15
8 16
32
dimensions FLUX motors
FEM 4070 F 458/F 458 EL/F 458-1/ F 460 Ex/F 460 Ex EL/ F 460-1 Ex/FBM 4000 Ex
F 416 Ex
F 457/F 457 EL
F 416-2 ExF 416-1 Ex
4˝211∕16˝411∕16˝
11½
˝
85∕16˝
411∕16˝9˝
178
411 ∕1
6˝
211∕16˝
4˝
8½˝
87∕8˝
F 414 type F 414
with motor and pumpassembled, the total lengthreduces by 5/8˝.
Note:
capacity x y Øz
0,55 kW 8˝ 11˝ 519∕32˝
0,75 kW 8½˝ 12˝ 63∕16˝
1,1 kW 8½˝ 12˝ 63∕16˝
6 47⁄64˝
723
⁄32˝
7˝
33
drum and container pumps without zone separation
F 424 PP/PVDFF 427 S3-43/38
F 426 S-41/38 F 430 AL/HC/PP/PVDF
F 426 PP-50/33
(use
able
IL)
Posi
tion:
Pum
ping
type F 424 PP/PVDF and (S with Ø 2˝) F 427 S3
F 425 PP-50/34* F 426 PP-50/33
dimensions in mm Ø a b Ø a b c Ø a b c
immersion length 27˝119∕32˝ or 2˝
28˝ 31˝ 2˝ 32˝ 35˝ 28½˝ – – – –
immersion length 39˝ 40˝ 43˝ 2˝ 44˝ 47˝ 40½˝ 2˝ 43½˝ 46½˝ 40˝
immersion length 47˝ 48˝ 51˝ 2˝ 52˝ 55˝ 48½˝ 2˝ 51½˝ 54½˝ 48˝
type F 426 S-41/38 F 430 AL/HC/PP/PVDF(S with Ø 2“)
dimensions in mm Ø a b c d e Ø a b
immersion length 27˝ – – – – – –
19∕16˝or 2˝
28˝ 31˝
immersion length 39˝ 119∕32˝ 43½˝ 46½˝ 40˝ 14˝ 8˝ 40˝ 42½˝
immersion length 47˝ 119∕32˝ 51½˝ 54½˝ 48˝ 14˝ 8˝ 47½˝ 50½˝
F 425 PP-50/34
*With open valve dimensions a and b are increased by 0,3˝.
(use
able
IL)
23∕16˝
23∕16˝–21∕2˝
34
drum and container pumps with zone separation
FP 424 Ex S FP 425 Ex S-41/34 FP 430 Ex S
type FP 424 Ex S FP 425 Ex S-41/38* FP 430 Ex S
dimensions in mm Ø a b Ø a b c Ø a b
immersion length 27˝111/16˝ or 2˝
27½˝ 31˝ 119/32˝ 31½˝ 35˝ 28½˝ 119/32˝ 27½˝ 31˝
immersion length 39˝ 39˝ 42½˝ 119/32˝ 43½˝ 47˝ 40˝ 119/32˝ 39˝ 42½˝
immersion length 47˝ 47˝ 50½˝ 119/32˝ 51½˝ 54½˝ 48˝ 119/32˝ 47˝ 50½˝
*With open valve dimensions a and b are increased by 0,3˝
35
It is not merely the pump that makes the FLUX solutiona perfect equipment. FLUX Pump Kits include everythingfor that quick start required by today’s busy engineersand buyers: a ready to work, straight out of the box pump.All component parts – pump, motor and accessories –are carefully selected to complement each other.FLUX Pump Kits are available for:– acids and alkalis– concentrated acids and alkalis– petroleum products– highly flammable liquids– universal applications– 99,98 % drum emptyingSelect the most suitable combinationand see the advantages of buyinga FLUX Pump Kit, theall-inclusive service!
Flow meters and FLUXTRONIC®
Flow meters based on the nutating disc (FMC) or oval rotor principle (FMO) offer the right solution for any application.In combination with the FLUXTRONIC® evaluation electronics, filling and dosing processes of almost all fluids can be carried out with maximal preci-sion and safety. This goes for a wide range of liquids from thin to highly viscous. In automatic operation, signals can be output for control purposes. In this way, the most varied processes can be controlled..
For detailed information on FLUX Pump Kits,FLUX Liquid Meters and other FLUX productsplease ask for our sales brochures.
FLUX accessories & complements
FLUX is a world renowned brand for the highest standards in pump technology. It all began in 1950 with the invention of the electric barrel pump. Today, FLUX offers a wide range of pro-ducts which can be configured individually. For example, FLUX pumps are used in the chemical and pharmaceutical industries, in machine and plant construction, as well as in electroplating, sewage treatment plants, and the food industry.
Whether as a stand-alone or a system solution, FLUX quality means long useful life, excellent economic efficiency and a maximum of safety.
Apart from the outstanding FLUX product quality and reliability, our clients appreciate the expertiseand dedication of our employees to customer service.
Today, FLUX-GERÄTE GMBH supplies pumps to almost one hundred countries world wide.
FP 1
113/
1-U
SA p
rint
ed in
Ger
man
y
We deliver values.
FLUX PUMPS CORPORATION4330 Commerce CircleAtlanta, GA 30336Phone: (404) 691-6010 Fax (404) 691-63141-800-for-FLUX
Top Related