I N T E R I O R S.
R E D E F I N E D.
AUTHORIZED DISTRIBUTOR
INTERIOR DIVIDERS
SLIDING PASSAGE DOOR
ROOM DIVIDER
The INTERIOR DIVIDERS is a distinct set of innovative and contemporary sliding door panels with proprietary hardware systems used in a wardrobe application, surface mounted door, wall pockets, corner room dividers or wall partitions. These door systems are limited to interior applications only.
SLIDING CLOSET DOOR
INTERIORS. REDEFINED.
SLIDING CLOSET DOOR
The bottom rolling system features high end nylon rollers with a geared component for easy adjustability up to 7/8” with anti-jump protection.
The top rolling system features twin rollers consisting of rubber wheels for smooth and quiet operation.
INTERIORS. REDEFINED.
CLOSET SLIDING DOOR
8001 TRACK, TOP, DOUBLE
8002 TRACK, BOTTOM, DOUBLE
H-171 ROLLER, BOTTOM
H-161 TWIN ROLLER, TOP
INTERIORS. REDEFINED.
SLEEK WARDROBE
INTERIORS. REDEFINED.
INTERIORS. REDEFINED.
SLIDING PASSAGE DOOR
The Sliding Passage Door System does not require a floor track. It features a uniquely designed wall mounted wheel guide for easy installation and full egress.
Each top roller assembly consist of two top roller assemblies each consisting of four nylon wheels with ball bearing axles for easy and smooth operation. Roller assemblies also feature anti-jump design with 3/4” vertical adjustability.
INTERIORS. REDEFINED.
SLIDING PASSAGE DOOR
8011 TRACK, TOP, ROLLED
81010 L-BRACKET32-076-2 TOP ROLLER
ASSEMBLY
8012 FASCIA100353 TWIN
ROLLER GUIDE
INTERIORS. REDEFINED.
COZY WINE CELLAR
INTERIORS. REDEFINED.
Latch
INTERIORS. REDEFINED.
LATCHES (Continued)
SURFACE AND POCKET DOOR LATCH
PARTITION LATCH
OUTSIDE VIEW INSIDE VIEW OUTSIDE VIEW INSIDE VIEW
INTERIORS. REDEFINED.
ROOM DIVIDER
The bottom rolling system features high end nylon rollers with a geared component for easy adjustability up to 3/4” with anti-jump protection.
The top rolling system features twin rollers consisting of rubber wheels for smooth and quiet operation.
Horizontal and vertical support beams aremade of 14 gauge aluminum, 6063 or 6065alloy. Available in 2” x 4”, 4” x 4” and 4” x6”.
Other options available upon request.
INTERIORS. REDEFINED.
LOFT BEDROOM
INTERIORS. REDEFINED.
HOME OFFICE IN STYLE
INTERIORS. REDEFINED.
COZY NOOK
INTERIORS. REDEFINED.
BEAUTIFUL STORAGE
INTERIORS. REDEFINED.
2 PANEL TRACKLESS WARDROBE
FASCIA SPACERS
BACK TO BACK TWINBOTTOM ROLLERS
INTERIORS. REDEFINED.
2 PANEL TRACKLESS WARDROBE(Continued)By butting the top tracks together we get the correct distance for butting the twin bottom guides together allowing for correct alignment of the panels.
The current distance between the doors is ½” which is a gap that is 3/16” larger than the gap in the 3 Panel door.
If we were to create a new stamped metal part that combined the twin bottom rollers we could reduce the gap to 5/16”.
INTERIORS. REDEFINED.
3 PANEL TRACKLESS WARDROBE
ATTACHED TO FLOOR ATTACHED TO STILE
THIS CONFIGURATION, 2 OPEN POSITION OPTIONS
INTERIORS. REDEFINED.
3 PANEL TRACKLESS WARDROBE(Continued)It is necessary to rip the tab off of the track so the twin bottom roller bracket mounts to the stile with the correct distance to allow alignment of the panels.
As a result of ripping the tab, the gap between the doors becomes 5/16” instead of ½” as in the two panel system.
INTERIORS. REDEFINED.
FRAME FINISH OPTIONS
BLACK
WHITE
SATIN ALUMINUM
JAVA
INTERIORS. REDEFINED.
GLASS OPTIONS
MIRROR
WHITE LAMIPOLAR WHITE
BEIGE BLACK RAINFOREST GREEN
INTERIORS. REDEFINED.
DÉCOR RAIL
3-LITE 4-LITE 5-LITE
INTERIORS. REDEFINED.
5/16” Reveal
1/2” Reveal3/16” Reveal
1/8”Reveal
Pivot Door
INTERIORS. REDEFINED.
PIVOT DOOR (Continued)1/8” Adjustmentsfor out of plumb
Floor spacer
Wall brackets
Pivot inserts
Pivot Pin
Knurled edge
o Wall brackets are mirrors of each other so only two stamped parts are required to handle left or right hinge installations.
o Pivot inserts are mirrors of each other so only two die cast parts are required to handle left or right hinge installations.
o The Pivot pin has a knurled edge to allow for easy rotation for alignment during installation.
o The door will require a ball catch latch to secure and stop the door in the closed position, like we currently do with the geared hinge door. Our current UDC latch could work with a few modifications to the handle and bolt catch.
o If casing is going to be used to stop the door, the minimum height would be 5/16” unless an out of plumb condition dictated otherwise.
INTERIORS. REDEFINED.
www.dividersusa.us
SHOWER ENCLOSURES
SS-180SHOWER ENCLOSURE WITH FIXED
PANELThe DIVIDERS SHOWER ENCLOSURES is set of premium sliding door panels with the most inspiring and innovative proprietary hardware systems in the market today.
Both the DS-200 and SS-180 presents a blend of style and luxury that satisfies the most discriminating taste in décor.
DS-200FULL BIPASS SHOWER
ENCLOSURE
INTERIORS. REDEFINED.
o Full bi-pass shower enclosure
o Contemporary and exposed stainless steel rollers and anti-
jump feature
o Maximum width of 60” / Maximum height of 78”
o Available in 5/16” clear glass only
o Aluminum flush finger pull
o Metal finish options: polished chrome and brushed nickel
Solid stainless steel header system provide the support to hold up
the 5/16” glass.
Exposed 2-1/8” diameter ball bearing
top rollers.
Bottom Door Guide Flush Finger Pull
DS-200 | FULL BI-PASS SHOWER
ENCLOSUREPRODUCT FEATURES + OPTIONS
INTERIORS. REDEFINED.
Solid stainless steel header system provide
the support to hold up the 5/16” and 3/8” glass.
Exposed 1-1/2” diameter ball bearing
top rollers.
Door Stop Flush Finger Pull
SS-180 | SHOWER ENCLOSURE W/ FIXED
PANELPRODUCT FEATURES + OPTIONS
INTERIORS. REDEFINED.
o Single stationary shower enclosure
o Contemporary and exposed stainless steel rollers and anti-jump features
o Maximum width of 72” / Maximum height of 78”
o Available in 5/16” and 3/8” glass
o Contemporary square handle or
finger pull
o Metal finish options: polished chrome and brushed nickel
Top Related