8/10/2019 DCX Recycling Instruction 53 1000799 01
1/10
8/10/2019 DCX Recycling Instruction 53 1000799 01
2/10
Dismantl ing the Brocade DCX Backbone
Door
1. Remove the door.
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 2 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
3/10
Power supplies
WWN card bezel
Blowers (3)
2. Remove the power supplies, the World Wide Name (WWN) card bezel, and thethree blowers.
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 3 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
4/10
CP blades
Core blades
Port and
application
blades
3. Remove the CPs, the port cards, and the core blades.
Follow the directions for the WWN card, the CP and Core blades, and various port bladescontained in this document. Follow the separate recycling instructions for all application
blades.
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 4 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
5/10
Dismantling the World Wide Name card
WEEE items for removal
Other than the components listed below, which contain Brominated Flame Retardants,
follow your normal recycling process for the WWN card.
The components that contain Brominated Flame Retardants are on the board in thefollowing locations:
C5, U5, U1, U9, U10, Q2, Q1
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 5 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
6/10
Dismantling the CP blade
WEEE items for removal
1. Lithium battery: Board location XB1, XB2 (WEEE Annex II component)
2. Compact flash: Board location XJ24, XJ26Can be resold.
Other than the components listed below, which contain Brominated Flame Retardants,
you can follow your normal recycling process. The components that contain Brominated
Flame Retardants are on the board in the following locations:
Y1, Y2, L9, D1, U82, U83, D6, D5, D2, D3, D7, U57, U59, U62, U103, U101, U88,
U41, U51, U149, U89, U91, U97, U99, U108, U150, D4, U176, U124, U153, U178, U5,
U25, U26, U27, U28, U55, U56, U110, U111, U114, U115, U116, U191, U192, U194,U195, U196, U197, U200, U120, U121, U122, U123, U133, U134, U135, U136, U137,
U139, U140, U141, U205, U86, U145, U146, U175, U100, U70, U73, U129, U131,
U152, U96, U102, U15, U22, U24, U16, U21, U23, U187, U2, U54, U188, U52, U53,
U1, U3, U4, U8, U9, U10, U11, U12, U14, U17, U19, U20, U35, U37, U58, U60, U61,U63, U64, U68, U71, U42, U6, U13, U186, U69, U117, U125, U148, U36, U38, U45,
U65, U43, U72, U87, U104, Q21, Q18, Q3, Q5, Q7, Q10, Q20, Q12, Q14, Q16, Q23,
Q24, Q11, Q15, Q17, Q22, Q25, U90, Q1
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 6 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
7/10
Dismantling the Core blade
WEEE items for removal
ASICs: Board location U11, U17, U34, U42
Remove the heat sink covering the ASICs. Destroy the ASICs.
Other than the components listed below, which contain Brominated Flame Retardants,
you can follow your normal recycling process. The components that contain Brominated
Flame Retardants are on the board in the following locations:
D4, D9, D12, D16, D18, D22, D1, D23, D21, D2, D3, D5, D6, D7, D8, D10, D11, D13,D14, D15, D19, D20, U55, U16, U20, U26, U43, U46, U18, U25, U39, U47, U62, U15,
U48, U49, D17, U176, U19, U32, U28, U37, U12, U56, U23, U1, U2, U3, U6, U7, U8,
U51, U40, U44, U117, U148, Q14, Q31, Q32, Q36, Q38, Q41, Q42, Q44, Q30, Q33,Q34, Q37, Q39, Q40, Q43, Q45, U10, U31, U38, U57, U61, Q27, Q21, U50, Q3, Q12,
Q15, Q24, Q26, Q84, U24, U29
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 7 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
8/10
Dismantling the FC8-16 port blade
WEEE items for removal
ASICs: Board location U34
Remove the heat sink covering the ASICs. Destroy the ASICs.
Other than the components listed below, which contain Brominated Flame Retardants,you can follow your normal recycling process. The components that contain Brominated
Flame Retardants are on the board in the following locations:
D5, D13, D14, D3, D1, D11, D4, D6, D12, D15, U48, U12, U22, U57, U58, U59, U69,
U41, U31, U13, U49, U50, D7, U42, U44, U45, U46, U56, U47, U5, U6, U7, U3, U97,U63, U64, U4, U8, U9, U11, U24, U25, Q4, Q5, Q22, Q25, Q14, U40, U95, Q12, Q11,
Q9, Q13, Q3, Q6, Q16, Q17, Q18, Q28, Q29, Q30, Q31, Q32, U55, Q1, U1, U2, U54,
U60, U61, U94
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 8 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
9/10
Dismantling the FC8-32 port blade
WEEE items for removal
ASICs: Board location U28, U34
Remove the heat sink covering the ASICs. Destroy the ASICs.
Other than the components listed below, which contain Brominated Flame Retardants,you can follow your normal recycling process. The components that contain Brominated
Flame Retardants are on the board in the following locations:
Main Board: D5,D9,D13,D14, D2, D1, D11, D3,D4,D6,D8,D10,D12,D15, U48,
U12,U14,U22, U30,U41, U31, U13,U49,U50, D7, U42, U44, U45, U46, U56, U47,U5,U6,U7, U3,U57, U4,U8,U9,U11,U24,U25, Q2,Q3,Q4,Q5, Q18,Q21,Q22,Q25,
Q1,U1,U2,U51,U52,U53,U54, Q14,U36,U38,U40, Q12, Q11, Q6,Q9,Q13, Q16,Q17,
U55Daughter Card: L33, D4, D14, D1, U10, U29, U30, U31, U35, U36, U37, U38, U22,U59, U23, U11, U13, U20, U25, U41, U7, U46, U50, U84, U81, U85, Q1, Q2, Q3, Q5,
Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q28
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 9 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
8/10/2019 DCX Recycling Instruction 53 1000799 01
10/10
Dismantling the FC8-48 port blade
WEEE items for removal ASICs: Board location U28, U34
Remove the heat sink covering the ASICs. Destroy the ASICs.
Other than the components listed below, which contain Brominated Flame Retardants,
you can follow your normal recycling process. The components that contain BrominatedFlame Retardants are on the board in the following locations:
Main Board: D5, D9, D13, D14, D1, D2, D11, D3, D4, D6, D8, D10, D12, D15, U48,
U12, U14, U22, U30, U41, U31, U13, U49, U50, D7, U42, U44, U45, U46, U56, U47,
U5, U6, U7, U3, U57, U4, U8, U9, U11, U24, U25, Q2, Q3, Q4, Q5, Q18, Q21, Q22,Q25, Q14,U36,U38,U40, Q12, Q11, Q6,Q9,Q13, Q16, Q17, U55, Q1, U1, U2, U51, U52,
U53,U54,
Daughter Card: L33, D4, D14, D1, U10, U28, U29, U30, U31, U33, U34, U35, U36,
U37, U38, U39, U6, U22, U59, U23, U45, U11, U5, U8, U13, U20, U25, U41, U7, U46,U50, U84, U81, U85, Q1, Q2, Q3, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15,
Q16, Q17, Q18, Q28
Copyright 2008 Brocade Communications Systems, Inc. All Rights Reserved. Page 10 of 10Brocade DCX Backbone Recycling Instruction 02/20/2008 53-1000799-01
Top Related