STYPE KIT - TRACKING SYSTEM FOR CAMERA CRANES
DATASHEETA SYSTEM FOR HIGH-END
VIRTUAL AND AUGMENTED REALITY BROADCAST
W W W. S T Y P E G R I P.C O M
P A G E 2S T Y P E K I T D A T A S H E E T
P A G E 3S T Y P E K I T D A T A S H E E T
FEATURE WHY IT IS BENEFITIAL
BOLT-ON SYSTEM
No need for physical modifications of the crane — no special tools are necessary and
you get to keep your crane’s warranty. This also means you can reuse the Stype kit on
different cranes and on different locations.
AUTOMATIC AIMING & FOCUSING
Stype kit enables automatic aiming and focusing — targeting. Move the crane arm and
don’t worry about focus or frame. Very useful for beginner camera crane operators.
More experienced operators can get creative with this feature, too.
ROBUST & STANDALONENo need for external sensors, special floor surfaces or markers in the studio. Camera
crane and Stype kit is everything you need.
NO NEED FOR LINE-OF-SIGHT Because of mechanical tracking, there is no problem with interfering objects.
NOT PHOTOSENSITIVE Works equally well in a dark studio and outdoors in the sun.
EASY AND FAST SETUP Takes half an hour for initial installation and ~15 minutes for initial calibration.
LENS CALIBRATION Save time and do a better job with Stype kit’s integrated lens calibration feature.
PORTABLE Every component fits easily in a standard flight case – take it with you anywhere.
COST EFFECTIVE You can use your existing camera crane and don’t need to invest in expensive add-ons.
STYPE KIT OVERVIEW
Stype Kit is a mechanical tracking system for camera cranes.
Professionals can use the system in high-end television
studios for virtual studio and augmented reality broadcast.
Complete freedom of production techniques is available with
the Stype kit: green or blue screen, augmented reality (no
screens), inside or outside broadcast.
Stype kit is designed and manufactured by Stype in EU.
P A G E 4S T Y P E K I T D A T A S H E E T
ENCODER INPUT (8 CHANNELS) Pan, Tilt, Roll/External Encoder, Zoom, Focus, Dolly
RE-CALIBRATION TIME AFTER POWER UP Under 30 sec
DOLLY Travel on tracks (rail)
CAMERA TILT ANGLE 360 degrees
CAMERA PAN ANGLE 360 degrees
HEAD MAX SPEED 90 degrees/sec
HEAD MAX PAYLOAD 22,6KG
TRACK MAX LENGTH 13 METERS
ACCURACY (ANGLE) +-0.05 DEGREES
CANON LENSES DIGITAL PROTOCOL Yes
FUJION LENSES DIGITAL PROTOCOL Yes
AUTO AIMING Yes
AUTO FOCUSING Yes
DATA RECORDING FOR POST PROCESSING Yes
INPUT POWER 24V
POWER CONSUMPTION 50W
KIT WEIGHT 13KG
CRANE PAN RESOLUTION 524,288 per 360 DEG
CRANE TILT RESOLUTION 524,288 per 360 DEG
HEAD PAN RESOLUTION 524,288 per 360 DEG
HEAD TILT RESOLUTION 524,288 per 360 DEG
HEAD ROLL RESOLUTION 524,288 per 360 DEG
DOLLY RESOLUTION 31,066 PULSES PER M
ZOOM ENCODER RESOLUTION
~8,500 PULSES
SERIAL PORT RS-422, 38 400 kbps
PROTOCOLS FREED, STYPE
ETHERNET UDP over IP
DATA OUTPUTPOWER UP Genlock synchronized
BACKUP Offsets are permanently stored in nonvoilatile memory
TECHNICAL SPECIFICATIONS TABLE
P A G E 5S T Y P E K I T D A T A S H E E T
1
6
2
7
5
9
3
8
4
SYSTEM CONFIGURATION SCHEME
STYPE KIT CONSOLE - CONNECTOR SIDE
LEFT RIGHT
CRANE PAN/TILT
TRAVEL ON DOLLY
CAMERA FOCUS/ZOOM
PAN/TILT/ROLL
Stype kit sensors are placed on all pivot points of the camera crane. Sensors collect the positional data of the camera in 3D space.
Data is sent to the Stype kit main console in real-time where position is calculated and sent to the render engine.
GENLOCK
POSITIONAL DATA
VR DATA VR DATA
IN
OUTIN INRENDERENGINE
INAC POWER
Render engine composites the real-time camera footage and 3D virtual graphic overlays.
1
2 3
1 USB – Mini USB connector used to connect with PC for firmware upgrade.
2 24V POWER SUPPLY – standard 3 pin XLR for 24V power supply connector for connecting with power supply.
3VIRTUAL OUTPUT – Ethernet connector used for virtual studio serial output, as well as UDP/IP output of camera position, rotation, zoom and focus.
4 SYNC – BNC connector for connecting BlackBurst Genlock signal.
5DOLLY – 4 pin connector used to connect a string encoder if the crane is used on a dolly, or to connect a focus external encoder when the kit is used on a fixed tripod.
6HEAD CABLE – 24 pin AMP plug for connecting with head 24 pin cable. If you try to connect it to 37-pin head extension cable it will not work.
7 JOYSTICK – 16 pin AMP plug for connecting with Stanton joystick and zoom/focus handle.
8 ROLL – Used to connect Roll joystick when the roll axis is used on the camera head.
9 SENSORS – 12 pin Hirose female connector for connection with encoder set (part #7).
P A G E 6S T Y P E K I T D A T A S H E E T
COMPATIBLE RENDER ENGINES
marketgraph
COMPATIBLE CAMERA CRANES
2000 SERIES TRAVEL SERIES
CamMateSystems
®
Jimmy Jib
SUPER TECHNO
2012 CRANE
REACH 7,3FT (2.21M)
T1REACH 5FT (1.52M)
TRIANGLE STANDARD REACH 6FT (1.8M)
SUPERTECHNO 20 (TELESCOPIC)REACH 17FT (5,2M)
2018 CRANE REACH 13FT (4.17M)
T15REACH 9FT (2.74M)
TRIANGLE GIANT REACH 12FT (3.6M)
SUPERTECHNO 30 (TELESCOPIC)REACH 22,8FT (6,9M)
2024 CRANE REACH 20,1FT (6.12M)
T18REACH 13FT (3.96M)
TRIANGLE SUPER JIB
REACH 17,7FT (5.4M)
SUPERTECHNO 50 (TELESCOPIC)REACH 37,5FT (11,4M)
2032 CRANE REACH 26,6FT (8.08M)
T21REACH 17,5FT (5.31M)
TRIANGLE SUPER PLUS REACH 24FT (7.3)
2039 CRANE
REACH 32,11 FT (10,03M)
T25REACH 21FT (6,40M)
TRIANGLE EXTREME REACH 30FT (9.1M)
2043 CRANE REACH 39,4FT (11.99M)
TRIANGLE 12 METER HEIGHT 40FT (12M)
2050 CRANE REACH 45,9FT (39,94M)
OTHER CAMERA CRANES ARE AVAILABLE ON REQUEST. DELIVERY TIME IS FROM 2-4 WEEKS.OPTION: EVERY CRANE CAN BE PUT ON TRACKS
P A G E 7S T Y P E K I T D A T A S H E E T
CONTACT US
TELEPHONE
+385 91 888 66 72
WEBSITE
www.stypegrip.com
STYPE KIT DATASHEET
Top Related