Version: KITS-TDS-LMHAluR-Web-1016-eng
DESCRIPTION
APPLICATIONS
BENEFITS
- Eurofins Indoor Air Comfort Gold Standard - Easy to cut
- AS-Quality - Melting point of fibers > 1000 °C
- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install
CERTIFICATS
Data sheet:Lamella matLMF AluR
Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts
Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:
Oct.2016
Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators
Erzeugnisse aus MINERALWOLLE
Version: KITS-TDS-LMHAluR-Web-1016-eng
DESCRIPTION
APPLICATIONS
BENEFITS
- Eurofins Indoor Air Comfort Gold Standard - Easy to cut
- AS-Quality - Melting point of fibers > 1000 °C
- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install
CERTIFICATS
Data sheet:Lamella matLMF AluR
Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts
Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:
Oct.2016
Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators
Erzeugnisse aus MINERALWOLLE
Version: KITS-TDS-LMHAluR-Web-1016-eng
DESCRIPTION
APPLICATIONS
BENEFITS
- Eurofins Indoor Air Comfort Gold Standard - Easy to cut
- AS-Quality - Melting point of fibers > 1000 °C
- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install
CERTIFICATS
Data sheet:Lamella matLMF AluR
Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts
Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:
Oct.2016
Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators
Erzeugnisse aus MINERALWOLLE
Version: KITS-TDS-LMHAluR-Web-1016-eng
DESCRIPTION
APPLICATIONS
BENEFITS
- Eurofins Indoor Air Comfort Gold Standard - Easy to cut
- AS-Quality - Melting point of fibers > 1000 °C
- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install
CERTIFICATS
Data sheet:Lamella matLMF AluR
Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts
Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:
Oct.2016
Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators
Erzeugnisse aus MINERALWOLLE
Version: KITS-TDS-LMHAluR-Web-1016-eng
DESCRIPTION
APPLICATIONS
BENEFITS
- Eurofins Indoor Air Comfort Gold Standard - Easy to cut
- AS-Quality - Melting point of fibers > 1000 °C
- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install
CERTIFICATS
Data sheet:Lamella matLMF AluR
Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts
Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:
Oct.2016
Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators
Erzeugnisse aus MINERALWOLLE
LMH AluR je tepelná izolácia vyrábaná z nehorľavej minerálnej vlny. Štruktúra pružných lamiel z minerálnej vlny v spojení s vystuženou Al fóliou umožňuje ľahké obalenie potrubia izoláciou na jeho zakrivených plochách s väčšími priemermi alebo aj obalenie valcových nádob bez nutnosti použitia dištančných a upevňovacích prvkov.
Izolačná lamela LMH AluR je odporúčaná na použitie ako tepelná izolácia a ochrana proti ohňu v technických zariadeniach typu:• Vzduchotechnické potrubie kruhového alebo obdĺžnikového prierezu• Potrubné rozvody• Akumulačné nádoby
• Zlatý certifikát kvality vnútorného prostredia Eurofins GOLD• AS Kvalita• Kompaktná, odolná a pružná izolácia• Jednoduchá a rýchla inštalácia
• Ľahko sa reže a tvaruje• Bod tavenia vlákien ≥ 1 000 °C• Bez prídavku silikónového oleja
POPIS
POužItIE
VýHODy
CERtIfIKáty
Technický list:lamelová izoláciaLMH AluR
jún 2017
Verzia: KI-TL/LMH-ALUR/CZ-160902
Lamella Forte LMH AluR
Properties Symbol UnitTest method/
Standards
Reaction to fire EN 13501-1
ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR
λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)
≤ 250 AGI Q 132
≤ 80 EN 14706
AGI Q 132
EN 13468Water vapour diffusion resistance value
sd m EN 12086
Water absorption WP kg/m2 AGI Q 132
Melting point of fibres --- °C DIN 4102-17
Silicone free ---
Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303
Product range: Thickness: 20 - 140 mm
Length: 2.500 - 10.000 mm
Width: 500 or 1.000 mm Headoffice
Technical Solutions Europe
Knauf Insulation GmbH
Parkring 15-17
D-85748 Garching bei München
Production Plant
Knauf Insulation d.o.o.
Novi Marof
Croatia
www.knaufinsulation-ts.com
Handling & storage
All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.
Go to product
≥ 1000
Produced without addition of silicone oil
≤ 1,0
Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.
About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.
* reaction to fire for 20 mm thickness: A2
AS-Quality --- ≤ 10 ppm
> 100
non- combustible / A1* Declaration of performance
Thermal conductivity in relation to temperature
Maximum servicetemperature
ST(+) °CMineral wool side
Aluminium side
Description/Data
Lamella Forte LMH AluR
Properties Symbol UnitTest method/
Standards
Reaction to fire EN 13501-1
ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR
λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)
≤ 250 AGI Q 132
≤ 80 EN 14706
AGI Q 132
EN 13468Water vapour diffusion resistance value
sd m EN 12086
Water absorption WP kg/m2 AGI Q 132
Melting point of fibres --- °C DIN 4102-17
Silicone free ---
Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303
Product range: Thickness: 20 - 140 mm
Length: 2.500 - 10.000 mm
Width: 500 or 1.000 mm Headoffice
Technical Solutions Europe
Knauf Insulation GmbH
Parkring 15-17
D-85748 Garching bei München
Production Plant
Knauf Insulation d.o.o.
Novi Marof
Croatia
www.knaufinsulation-ts.com
Handling & storage
All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.
Go to product
≥ 1000
Produced without addition of silicone oil
≤ 1,0
Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.
About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.
* reaction to fire for 20 mm thickness: A2
AS-Quality --- ≤ 10 ppm
> 100
non- combustible / A1* Declaration of performance
Thermal conductivity in relation to temperature
Maximum servicetemperature
ST(+) °CMineral wool side
Aluminium side
Description/Data
Lamella Forte LMH AluR
Properties Symbol UnitTest method/
Standards
Reaction to fire EN 13501-1
ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR
λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)
≤ 250 AGI Q 132
≤ 80 EN 14706
AGI Q 132
EN 13468Water vapour diffusion resistance value
sd m EN 12086
Water absorption WP kg/m2 AGI Q 132
Melting point of fibres --- °C DIN 4102-17
Silicone free ---
Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303
Product range: Thickness: 20 - 140 mm
Length: 2.500 - 10.000 mm
Width: 500 or 1.000 mm Headoffice
Technical Solutions Europe
Knauf Insulation GmbH
Parkring 15-17
D-85748 Garching bei München
Production Plant
Knauf Insulation d.o.o.
Novi Marof
Croatia
www.knaufinsulation-ts.com
Handling & storage
All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.
Go to product
≥ 1000
Produced without addition of silicone oil
≤ 1,0
Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.
About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.
* reaction to fire for 20 mm thickness: A2
AS-Quality --- ≤ 10 ppm
> 100
non- combustible / A1* Declaration of performance
Thermal conductivity in relation to temperature
Maximum servicetemperature
ST(+) °CMineral wool side
Aluminium side
Description/Data
Lamella Forte LMH AluR
Properties Symbol UnitTest method/
Standards
Reaction to fire EN 13501-1
ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR
λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)
≤ 250 AGI Q 132
≤ 80 EN 14706
AGI Q 132
EN 13468Water vapour diffusion resistance value
sd m EN 12086
Water absorption WP kg/m2 AGI Q 132
Melting point of fibres --- °C DIN 4102-17
Silicone free ---
Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303
Product range: Thickness: 20 - 140 mm
Length: 2.500 - 10.000 mm
Width: 500 or 1.000 mm Headoffice
Technical Solutions Europe
Knauf Insulation GmbH
Parkring 15-17
D-85748 Garching bei München
Production Plant
Knauf Insulation d.o.o.
Novi Marof
Croatia
www.knaufinsulation-ts.com
Handling & storage
All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.
Go to product
≥ 1000
Produced without addition of silicone oil
≤ 1,0
Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.
About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.
* reaction to fire for 20 mm thickness: A2
AS-Quality --- ≤ 10 ppm
> 100
non- combustible / A1* Declaration of performance
Thermal conductivity in relation to temperature
Maximum servicetemperature
ST(+) °CMineral wool side
Aluminium side
Description/Data
Lamella Forte LMH AluR
Properties Symbol UnitTest method/
Standards
Reaction to fire EN 13501-1
ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR
λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)
≤ 250 AGI Q 132
≤ 80 EN 14706
AGI Q 132
EN 13468Water vapour diffusion resistance value
sd m EN 12086
Water absorption WP kg/m2 AGI Q 132
Melting point of fibres --- °C DIN 4102-17
Silicone free ---
Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303
Product range: Thickness: 20 - 140 mm
Length: 2.500 - 10.000 mm
Width: 500 or 1.000 mm Headoffice
Technical Solutions Europe
Knauf Insulation GmbH
Parkring 15-17
D-85748 Garching bei München
Production Plant
Knauf Insulation d.o.o.
Novi Marof
Croatia
www.knaufinsulation-ts.com
Handling & storage
All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.
Go to product
≥ 1000
Produced without addition of silicone oil
≤ 1,0
Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.
About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.
* reaction to fire for 20 mm thickness: A2
AS-Quality --- ≤ 10 ppm
> 100
non- combustible / A1* Declaration of performance
Thermal conductivity in relation to temperature
Maximum servicetemperature
ST(+) °CMineral wool side
Aluminium side
Description/Data
LMH AluR
Technický parameter
Súèinite¾ tepelnej vodivosti v závislosti od teploty
0,037 pri 10 °C0,044 pri 50 °C0,056 pri 100 °C0,070 pri 150 °C0,088 pri 200 °C0,109 pri 250 °C
W/(m . K) EN 12667λ
Maximálna prevádzková teplota ST(+) 250* EN 14706
EN 823
EN 13501-1
DIN 4102-17
EN 1602
EN 12086
EN 13468
–
EN 14303
T4
A1
≥ 1 000
≤ 1,0 (WS1) kg/m2
m
ppm
–
> 100
≤ 10
Výroba bez prídavku silikónového oleja
–
–
–
MW EN 14303-T4-ST(+)250-WS1-MV1-CL10
Wp
Sd
–
τt
Trieda tolerancie hrúbky
Trieda reakcie na oheò
Bod tavenia vlákien
Nasiakavosś
Ekvivalentná difúzna hrúbka (fólia)
Obsah silikónu
Kód znaèenia
AS-Kvalita
Symbol Jednotka NormaTrieda/Hodnota
Vlastnosti
* pre povrch na strane fólie ≤ 80 °C
Výrobné rozmery
Manipulácia a skladovanie
Hrúbka: 25 – 140 (mm)Dĺžka: 2 500 – 10 000 (mm)Šírka: 500 alebo 1 000 (mm)
Izolácie LMH AluR sú dodávané v PE obaloch, ktoré sú určené len na krátkodobú ochranu. Materiál musí byť skladovaný na suchom mieste bez vystavenia vplyvu priameho slnečného žiarenia. Informácie o produkte sú uvedené na každom balení.
Všetky práva vyhradené vrátane fotoreprodukcie a uloženia na elektronických nosièoch. Komerèné využitie pracovných postupov uvedených v tomto dokumente nie je povolené. Príprave tohto dokumentu bola venovaná maximálna pozornosś, napriek tomu nie je možné celkom vylúèiś výskyt prípadnej chyby. Vydavate¾ nepreberá žiadnu zodpovednosś za prípadné nesprávne informácie a ich dôsledky. Akéko¾vek podnety a pripomienky k obsahu tohto dokumentu sú vítané.
Knauf Insulation, s. r. o. železničný rad 24 968 14 Nová BaňaSlovenská republika
Zákaznícky servistel.: +421 45 68 33 512fax: +421 45 68 33 [email protected]
O technológii ECOSEVýrobky z minerálnej vlny Knauf Insulation, pri ktorých výrobe sa používa technológia ECOSE, prinášajú výhody bezformaldehydového spojiva z obnoviteľných zdrojov, ktoré nahrádzajú chemikálie na ropnej báze. táto technológia bola vyvinutá pre výrobky z mine-rálnej vlny Knauf Insulation na zvýšenie ich šetrnosti k životnému prostrediu bez zmeny tepel-notechnických, akustických alebo požiarnych vlastností. Materiál neobsahuje žiadne pridané farbivá – farebnosť minerálnej vlny je úplne prírodná.
Izolácie LMH AluR sú označené značkou CE, ktorá dokladuje splnenie všetkých kritérií podľa harmonizovanej normy EN 14303. Vyhlásenie o vlastnostiach a ostatná dokumentácia sú k dispozícii na www.knaufinsulation.sk.
Vyhlásenie o vlastnostiach
Web
Top Related