Download - Custom Railing - Trex Commercial Products, Inc. · Tensiline stainless steel cable railing system is designed and constructed using stainless steel cables and a selection of stainless

TENSILINE™ CABLE RAILINGCustom Railing

7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com

© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia

Tensiline stainless steel cable railing system is designed and constructed using stainless steel cables and a selection of stainless steel fittings and turnbuckles to achieve the desired look for your project. The use of stainless steel cable allows for minimal sightline obstruction. A variety of materials, finishes and colors are available to meet your requirements.

Tensiline™ Cable Railing



Mounting Options

Top Mount (Custom Options Available)

Fascia Mount (Custom Options Available)




Tech Specifications

Material: Aluminum, Stainless Steel, Steel

Finishes: Aluminum: Anodized/High Performance Coatings/Architectural Powder Coat

Stainless Steel: Brushed/Polished

Steel: Galvanized/High Performance Coatings/Architectural Powder Coat

Height: 30", 36" or 42" - Standard (Custom Available)

Standard Post Spacing: 4' On Center - Standard (Custom Available)

Mount Type: Top or Fascia

Frame: Square Tube, Round Pipe, Flat Bar - Standard (Custom Available)

Top Rail/Handrail: To match frame material and finish (Custom Available)

Infill Options: Cable: 3/16" and 1/4" - Standard (Custom Available)

ASTM STDS: A240/A240M/A554/A555/A666 (Stainless), C1048-12 (Glass),

F837-08 & F2281-04 (S/S Hardware)




Frame Configurations (Custom Available)

Flat Bar Frame

Square Tube Frame

Round Pipe Frame

Custom Frames

FLAT BAR FRAMECABLE FITTING

CABLE FITTING

CABLE FITTING

CABLE FITTING

STAINLESS STEEL CABLE



SQUARE TUBE FRAME

ROUND PIPE FRAME

CUSTOMIZE THE FRAME, CABLE, AND FITTINGS TO ACHIEVE THE DESIRED LOOK




Top Mount Base Plate Stringer Mount

Fascia Mount Base Plate Fascia Mount Stair Base Plate

Core Mount

Notes:Handrails can be mounted to concrete or steel. Anchor size/Type may vary due to field conditions.

O.D. 3/8” WELD STUD W/NYLOCK NUT

Dimensions dependent on steel geometry.

2 1/2”

2 1/2”

4 1/2”

4 1/2”

4 1/2”

5”

5”

6”

6”

O.D. 3/8” THREADED ROD W/EPOXY AND NYLOCK NUT

O.D. 3/8” THREADED ROD W/EPOXY AND NYLOCK NUT

4”

O.D. 3/8” THREADED ROD W/EPOXY AND

NYLOCK NUT

Dimensions dependent on steel geometry.

8,000 PSI MIN NON-SHRINK, NON-METALLIC GROUT

CONDITIONDEPENDENT