1
2
http://www.alteich.com/tidbits/t060401.htm:
An estimated 90% of the world's trade today moves in containers.
One hundred million container loads crisscross the world's oceans each year in
over 5,000 container ships.
Some 20% of the containers on boardare empty…
http://log.ae/2008/09/01/maximising-space/
3
http://www.interasset.com/docs/AssetManagementWP.pdf
Container Usage during its Life-Span
A container can spend on average 56% of its lifespan either idle or being repositioned while empty.
This represents a non revenue generating part involving additional costs (such as warehousing and repositioning)
that are assumed either by the shipping or the leasing company.
Such a cost is part of the leasing rate.
Copyright © 1998-2009, Dr. Jean-Paul Rodrigue, Dept. of Global Studies & Geography, Hofstra University. For personal or classroom use ONLY
4
http://www.interasset.com/docs/AssetManagementWP.pdf
Container Usage during its Life-Span
The lifespan of a container ranges between 10 to 15 years depending on its level of usage and the conditions
it has been exposed to.
A well maintained container not exposed to harsh conditions can even have a lifespan up to 20 years.
Copyright © 1998-2009, Dr. Jean-Paul Rodrigue, Dept. of Global Studies & Geography, Hofstra University. For personal or classroom use ONLY
55
INNOVATION, what can it bring?
The year 1954.
At that time Philip Morris & Co, owners of a brand called Marlboro, was dead last in sales among the major tobacco companies.
Marlboro makeover--- it’s packaging!
For a 5 year exclusivity Marlboro was the first brand to be packaged in the handy “Flip-Top Box.”
Marlboro’s new image paid
huge dividendshuge dividends
in attracting smokers.
Think outside the box !
6
aluminum and/or …
care free aluminum / iron / galvanized iron / …WIKI: galvanizing for protection of iron is favored because of its low cost,
the ease of application, and the extended maintenance-free service that it provides.
1958
7
YESTERDAY’S TECHNOLOGY
8
YESTERDAY’S TECHNOLOGY
9 graphics via www.cosmos.be
Technical innovation, copyrighted design,exclusive implementation through Patent Application,taking into account the range of terminal operations:
10
TODAY’S TECHNOLOGY
11
TODAY’S TECHNOLOGY
Copyright © Holland Container Innovations - 2009
12
Volume reduction!less than 20% of the original volume (16.8%)
© eric parein - 2009
13
40’ Foldable Standard General Purpose Shipping Container (graphics here 12m x 2.44m x 2.70m)
© eric parein - 2009
Trade Mark
14
its automatic upright positioning( the folding principle)
© eric parein - 2009
the Tunnelthe Door-End and
the Back-End are off
15
the essential solid Swivel Rods and Coil Springs
© eric parein - 2009
16
the Side Wall upright on Bottom Plate( the spring here is almost at rest )
© eric parein - 2009
17© eric parein - 2009
the Tunnel, its controlled folding or rising the folding principle - think outside the box, literally!
18
extra hinges, serving the overall strength
© eric parein - 2009
19© eric parein - 2009
the Enfolded Tunnel ( held or secured in ‘Enfolded Position’ )
20
12 Contickes stacked horizontally
© eric parein - 2009
21 conditioning towards ‘repositioning’
© eric parein - 2009
22utilizing existing port and terminal’s equipment
the
straddle
carrier
23coast to coast repositioning
24© eric parein - 2009
40’ (-)
2m44 wide
2m70 high
4 solid hinges
4 coil springs
2 fork lift holes
25
dry freight – technical issue(half in length depiction, scaled down Tunnel-Elements, in width and height only)
© eric parein - 2009
26 coil springs positioning on one axle
© eric parein - 2009
27
being folded
© eric parein - 2009
28
sturdily enfolded
© eric parein - 2009
29
30
The Manufacturing
31
The Manufacturing
32© eric parein - 2009
Google:
Container Corner Blocks
33one End engages the other
© eric parein - 2009
34
locking device on door / positioning rods / rubber
© eric parein - 2009
35
Locking Device (yellow) and Positioning Rod (red)The locking devices (yellow) are located in the vertical sections
© eric parein - 2009
36
Handles (red) securing the Door-End and Back-End to the Tunnel
© eric parein - 2009
37
moving Conticke’s Door-Ends onlyMaximal reduction !
adjust Ends thickness to ½ foot = 80 Door Ends assembled within 40’!
© eric parein - 2009
38
Feasibility – Huge Dividends Check ‘Foldable Containers: a New Perspective on Reducing Container-Repositioning Costs’ on ‘http://www.ejtir.tudelft.nl/issues/2001_04/pdf/2001_04_01.pdf
39Copyright © 1998-2009, Dr. Jean-Paul Rodrigue, Dept. of Global Studies & Geography, Hofstra University. For personal or classroom use ONLY
From 1/5th, to ‘Complete Empty Volume Reduction’ …
40Scheme from study by the Technical University of Delft - (link on previous slide)
YES
YES
YESYES
not enfolded
41
42
1. Other technical option is to enfold from 16 cm higher hinge to also store the two container ends. Less efficient.
2. Preferably, the back end would be entirely flat outside, to allow more volume inside.3. Both end parts, as well as the extremities of the green parts, are possibly without the forklift cut outs.4. Possibly, (some) manipulation or use of the containers do not require the springs.5. The watertight property is not compulsory for all transported goods or commodities.
Watertight packing or covering the goods inside might even be possible.6. The plates and the back end are hollow or not. If hollow the container has increased floatation capacity.
Possibly they are ecologically foam-filled, also to offer a temperature barrier.7. The side walls could be made of a single corrugated plate. 8. Full recycle ability is pursued. Adhering maximal to the Cradle to Cradle philosophy...
If one part is damaged, the other parts remain fully recoupable to further serve.9. Longer hinges or extra hinge parts in between the shown hinges if required. All measurements are possibly to
be adapted.10. Most preferably galvanized steel execution, equals longevity. Or, no paint.11. Outside the great money-saving folding property, longevity further compensates initial manufacturing costs.12. Outside visual identification of the Conticke happens through its tags all around the door-end, as well
vertically as horizontally. On the front, the top side, as on its two sides. As there is only one door-end per container assembly, the other parts remain neutral as they are interchangeable.
13. Patent protection is pursued to acquire exclusivity and to easily control the development, manufacture and exploitation.
14. “In this age of terrorism, the folding container ensures better security since it cannot be so easily used as a means of smuggling,”
15. Strategically, own specific corner fittings and consecutive own equipment clamps is an option.
© eric parein - 2009
43
Thank You for considering: The environment-friendly key to lower IT costs.
Significantly increasing the TOS appeal.
Eric Parein – CONCEPT LICENSING
© eric parein - 2009
Top Related