Condition monitoringOur condition monitoring service is a proactive maintenance health check for all types of electromechanical equipment. This service can help prevent total loss of equipment function and reduce the risk of production unplanned downtime.
By applying predictive technologies and root cause analysis techniques to rotating equipment (including pumps, gear drives, conveyors and motors) we can fully understand the actual condition of your critical assets.
Techniques such as vibration analysis through to thermal imaging target potential issues and help accurately predict and identify when a breakdown is likely to occur. Additionally we provide a reactive service to assist, identify and accurately diagnose root cause of failure. We offer advice on the appropriate maintenance and/or corrective work that needs to be carried out, allowing for the optimisation of assets and prevention of unplanned events.
Our Reliability Service technicians and engineers hold ISO/ASNT Certificates to Level 2/3 in vibration analysis, infrared thermography and lubrication management, together with many years industry experience.
Our condition based monitoring service is a proactive maintenance health check for all types of electromechanical equipment. This service can help prevent total loss of equipment function and again reduce the risk of production unplanned downtime.
Key Services
•Asset commissioning
•Conventional vibration analysis
•Remote / online vibration analysis
•Vibration phase analysis
•Lubricant analysis
•Bearing & gear analysis
•Acceptance testing
•Resonance testing
•Energy analysis
•Shaft current discharge measuring
•Driving proactive maintenance
•Ultrasonic air leak surveys
•Mechanical thermal imaging
•Electrical thermal imaging
•Process thermal imaging
•On-site analysis and correction
•Re-engineering solutions
•Failure mode analysis
•Thermographic surveys
•Laser alignment
•Asset management
•24 hour availability
•Thermographic surveys
•ATEX certified repairs
•24 hour availability
Loose connection found by thermal imaging
Bearing inner-raceway suffering from fluting (EDM) identified by vibration analysis and
shaft current discharge analysis Powered by Technology. Driven by Service.www.parsons-peebles.com
We provide a complete portfolio of service solutions for motors, generators, pumps, gearboxes and compressed air solutions.
With 11 manufacturing and service workshops in the UK as well as representation worldwide, we are well positioned to ensure you receive a high quality, rapid service for all your electromechanical requirements.
SERVICE A
ND SPA
RES O
FFE
RIN
G
For more information visit www.parsons-peebles.com or email: [email protected]
Our locations
Avonmouth, BS11 9HST: +44 (0) 1179 820 081
Cardiff, CF10 4DFT: +44 (0) 2920 481 831
Castle Donington, DE74 2NPT: +44 (0) 1332 850 346
Cornwall, PL26 7YHT: +44 (0) 1726 828 987
London, IG11 0BAT: +44 (0) 20 8591 9957
Reading, RG30 1DZT: +44 (0) 845 408 4699
Rosyth, KY11 2EAT: +44 (0) 1383 421 150
Rotherham, S26 5NUT: +44 (0) 114 248 4391
Somerset, BA20 2YB T: +44 (0) 1935 703 685
Stonehouse, GL10 3RFT: +44 (0) 1453 826 433
Swindon, SN3 4TAT: +44 (0) 1793 832 828
Powered by Technology. Driven by Service.www.parsons-peebles.com
Top Related