Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/17/2006 Chapter 9 Capillary Electrophoresis
Chapter 9 Capillary Electrophoresis (CE) References: • Dale R. Baker, Capillary Electrophoresis,
John Wiley & Sons, 1995.• M.G. Khaledi, Ed., High-Performance
Capillary Electrophoresis, John Wiley & Sons, 1998.
• Colin F. Poole, The Essence of Chromatography, Elsevier, 2003.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3. Modes of CE 3.1 Capillary Zone Electrophoresis (CZE)
CZE or Free solution capillary electrophoresis (FSCE).
Fill capillary with a buffer of constant composition Fill source and destination vials with same buffer Analyze cations and anions simultaneously Nor for neutral species
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2008 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2008 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2008 Chapter 9 Capillary Electrophoresis
3.2 Micellar electrokinetic capillary chromatography (MEKC) (Electrochromatography)
Developed by Shigeru Terabe et al. (Anal. Chem. 1984, 56, 111) Provides a method for separation of electrically neutral
compounds Combines the separation mechanism of chromatography with the
electrophoretic and electroosmotic movement of solutes and solutions
Separation is based on the partitioning of solutes between the surfactant micelles and the run buffer.
The detector output is referred to as electrokinetic chromatogram
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Three factors affecting apparent electrophoretic mobility of an anlyte in MEKC:
The system µEOF
The fraction of analyte in the electrolyte solution and its µEP
The fraction of analyte in the pseudo-stationary phase and the µEP of the micelle
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.2.1 Principles of MEKCThis mode of CE is based on the partitioning of solutes
between micelles and the run buffer. Detergents (surfactants)
Molecules that have a hydrophilic, water soluble moiety on one end of the molecule and a hydrophobic,
water insoluble moiety on the other.e.g. Sodium dodecyl sulfate (SDS), [CH3-
(CH2)11-O-SO3-], also called sodium lauryl sulfate
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Critical micelle concentration (CMC) The concentration of a detergent present in
solution when micelles begin to form. Micelles
Aggregations of individual detergent molecules. Aggregation number
The number of detergent that make up the a micelle.
Kraft pointThe temperature at which the solubility of the detergent = the critical micelle concentration
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2005 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Differences between chromatography and MEKC:
Chromatographic separations are based differences in
distribution of sample molecules between a stationary phase and a mobile phase. However, in MEKC, there are two phases, aqueous and micelle, both of which move.
In chromatography, the solutes and mobile phase are moved through the column by pumped flow, whereas in MEKC, they are moved through the capillary by EOF.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Retention Parameters in MEKC
• Capacity factor (retention factor) of an electrically neutral solute is defined the ratio of the umber of moles of solute in the micelles, nmc, to the number of the moles in the aqueous phase, naq:
k’ = nmc/naq [3-1]
k’ = (tR – t0)/t0(1 – tR/tmc) [3-2](Terabe et al. Anal. Chem. 1984, 56, 111)
This is similar to the equation in Chromatographyk’ = (tR – t0)/t0 [3-3]
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2008 Chapter 9 Capillary Electrophoresis
k’ = (tR – t0)/t0(1 – tR/tmc) (3-2)
k’ = (tR – t0)/t0 (3-3)
(1 – tR/tmc) is due to the retention properties of MEKC. When Tmc is very large, eq (3-2) is same as (3-3).
k’ is related to T0, TR, and Tmc in MEKC
Retention Parameters in MEKC
• Because tR = l/s, t0 = l/0, tmc = l/mc:
k’ = (tR – t0)/t0(1 – tR/tmc) [3-2]
Insert tR = l/s, t0 = l/ 0, tmc = l/mc and rearrange
k’ = (0/s – 1)/(1 - mc/s) [3-4]
Since = Ek’ = (EOF/s – 1)/(1- mc/ s) [3-5]
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2008 Chapter 9 Capillary Electrophoresis
Resolution in MEKC
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Baker, 1995
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.2.2 Separation of ionic solutes by MEKC
Neutral molecules:Differences in their distribution between the aqueous buffer and the micelles
Ionic molecules:Differences in their electrophoretic mobilities or because of interactions with micelles, depending on the charges of the ionic solutes and the micelles.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
For negatively charged micelles are used, such as SDS:
Baker, 1995
cations
neutral
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.2.3 Using Modifiers in MEKC
Modifiers affecting the charge on the micelle or the solute and changing the solubility of a solute in the micelles.
e.g. addition of tetraalkylammonium (TAA) to an SDS buffer to improve the separation of carboxylic acids (formation of neutral ion pairs ).
Affects also the retention of positively charged solutes (decreases when TAA salts were added).
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Modifiers serving as a second pseudophase
• Cyclodextrin-modified MEKC has been used to separate very hydrophobic solutes.
• Cyclodextrins (CD’s) are water-soluble oligosacchrides. CD’s have a characteristic toroidal shape, with a hydrophobic cavity and a hydrophilic external surface. CD’s are electrically neutral, they migrate with the velocity of the EOF
• Hydrophobic solute is not separated if no CD is added.• When a CD is added to the buffer,
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
k’ = nmc/nCD
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.3 CAPILLARY ISOELECTRIC FOCUSING (CIEF)
3.3.1 Properties of Amphiprotic Compounds
• An amphiprotic compound is a species that in solution is capable of both donating and accepting a proton. A typical amino acid, such as glycine, is an amphiprotic compound.
• CIEF is used to separated amphiprotic species, such as amino acids and proteins that contains a weak carboxylic acid group and a weak base amine group.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
When glycine is dissolved in water, three important equilibrium:NH2CH2COOH NH3
+CH2COO- [1]
Internal acid/base reaction proceeds far to the right, with product being the predominant species in the solution.
NH3+CH2COO- + H2O NH2CH2COO- + H3O+ [2]
Ka = 2 x 10-10
NH3+CH2COO- + H2O NH3
+CH2COOH + OH- [3]
Kb = 2 x 10-12
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
• zwitterion: The amino acid product bearing both a positive and a negative charge, is called a zwitterion.
• Isoelectric point (PI): The isoelectric point of an amphiprotic compounds is the pH at which the compound has a net charge of zero. No net migration of amino acid occurs in an electric field when the pH of the solvent is such that the concentrations of anionic and cationic forms are identical.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
The PI is readily related to the ionization concentrations for the species. For glycine:
Ka = [H3O+][NH2CH2COO-]/[NH3+CH2COO-]
Kb = [OH-][NH3+CH2COOH]/[NH3
+CH2COO-]
At isoelectric point,[NH2CH2COO-] = [NH3
+CH2COOH]
Thus,Ka/Kb = [H3O+]/[OH-]
Substitution of Kw/[H3O+]for [OH-], then
[H3O+] = (KaKw/Kb)2
[H3O+] = 1 x 10-6
pI = 6
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Three Steps involved in CIEF:
Formation of a pH gradient in the capillary Performing Isoelectric Focusing
Mobilization of the focused zones
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.3.2 Formation of a pH gradient in the capillary
In isoelectric separation of amphiprotic species, the separation is performed in a buffer mixture that varies in pH continuously along its length. The pH gradient is prepared from the mixture of several different ampholytes in an aqueous solution.
.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
NaOHH3PO4
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
To form a pH gradient in a capillary:(1) The capillary is filled with a mixture of ampholytes that will produce a certain pH gradient (e.g. 3-10).(2) One end of the capillary is then inserted in a solution of strong base (NaOH) (cathode). The other end is immersed in a solution of strong acid (phosphoric) (anode).(3) When an electric field is applied, hydrogen ions begin to migrate from the anode toward the cathode, while hydroxide ions begin to move in the opposite direction.(4) The ampholytes in the buffer mixture migrate also depending on their net charge. Ultimately they reach the pH where their net charge is zero (pI).
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.3.3 Isoelectric Focusing
CIEF is performed by filling the capillary with a mixture of ampholytes and SAMPLE.
Similar to the migration of ampholytes, analyte ions also migrate until they reach their pI.
No EOF in the capillary. Large volumes of sample are injected.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
3.3.4 Mobilization of the focused zones Hydrodynamic flow: to pressure the
capillary. Electrophoretic mobilization
• Add NaCl into the NaOH solution after focusing.• Both Cl- and OH- migrate into that end of the
column, and sum of these two concentrations is balanced by H+.
• The pH gradient is no longer stable • Analytes change to positively charged, and moves
toward the cathode.
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
Advanced Analytical Chemistry – CHM 6157 ® Y. CAI Florida International UniversityUpdated on 10/27/2006 Chapter 9 Capillary Electrophoresis
• Dr. Bruce McCordNovember 6, 2006
3.4 Capillary Gel Electrophoresis
Top Related