CertaDrive LED drivers – Linear HV non-isolatedCertaDrive 40w 240mA 160V 230VJanuary 28, 2015
Fixed current/voltage LED drivers for high volume LED propositions The CertaDrive LED drivers are designed to fulfill the market need for essential lighting. TheCertaDrive LED drivers offer basic specifications such as specific current and voltage settings,optimal to operate CertaFlux LED modules. Life time of the driver is set at 50,000 hours.Philips will extend the portfolio of CertaDrive LED drivers to match high volume CertaFluxLED line propositions as well as high volume opportunities of other LED board manufactures.
Benefits• Design freedom• Optimized to operate CertaFlux LED lines• 3-years warranty
Features• Small dimensions• Specific current and voltage• 50,000 hours life time• Fast Time to Market
Applications• Waterproof luminaires• Recessed, surface and suspended luminaires in offices• High bay luminaires
Electrical input dataSpecification item Value Unit ConditionNominal input voltage 220...240 Vac
Nominal input frequency 50...60 HzNominal input current 0.21 A Input voltage 230 Vac, full loadNominal input power 44 W Input voltage 230 Vac, full loadPower factor ≥ 0.9 Input voltage 230 Vac, full loadTotal harmonic distortion ≤ 20 % Input voltage 230 Vac, full loadEfficiency 88 % Input voltage 230 Vac, full load, maximum output powerNominal input voltage DC 186...250 Vdc
Nominal input current DC 0.21 A Input voltage 230 Vdc, full loadInput voltage AC 202...254 Vac Performance rangeInput frequency AC 47.5...63 Hz Maximum permissible rangeInput voltage DC 168...275 Vdc Maximum permissible range
Electrical output dataSpecification item Value Unit ConditionRegulation method Constant CurrentOutput voltage 116...160 Vdc
Output voltage max. 250 V Peak voltage (RMS) at open loadOutput current 0.24 A Full output current settingOutput current tolerance ± 8 %Output current ripple ≤ 30 % Ripple (100Hz) = peak / averageOutput power 38 W Full outputGalvanic isolation No Lamp to mains
Electrical data controls inputSpecification item Value Unit ConditionControl method Fixed
WiringSpecification item Value Unit ConditionInput wire cross-section 0.5...1.5 mm2 WAGO744, solid wire
16...20 AWG WAGO744, solid wireInput wire strip length 8...9 mmOutput wire cross-section 0.5...1.5 mm2 WAGO744, solid wire
16...20 AWG WAGO744, solid wireOutput wire strip length 8...9 mmMaximum cable length 600 mm Total length of wiring including LED module, one way
January 28, 2015 © 2015 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40w 240mA 160V 230V Page 2 of 6
Dimensions and weightSpecification item Value Unit ConditionLength (A1) 209 mmWidth (B1) 30 mmHeight (C1) 20.9 mmFixing hole diameter (D1) 4.1 mmFixing hole distance (A2) 195 mmWeight 140 gram
Operational temperatures and humiditySpecification item Value Unit ConditionAmbient temperature +0...+50 ºCTcase-max 75 ºC Maximum temperature measured at Tc-pointTcase-life 65 ºC Measured at Tc-pointMaximum housing temperature 110 ºC In case of a failureRelative humidity 10...90 % Non-condensing
Storage temperature and humiditySpecification item Value Unit ConditionAmbient temperature -25...+85 ºCRelative humidity 5...95 % Non-condensing
LifetimeSpecification item Value Unit ConditionDriver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life.
Maximum failures = 10%
Programmable featuresSpecification item Value Remark ConditionSet output current (AOC) No See Design-in guide.
Default output current: 0.24 ALED module temperature derating (MTP) NoConstant Lumen Over Lifetime (CLO) NoDC emergency dimming (DCemDIM) NoCorridor mode NoEnergy metering NoDiagnostics No
January 28, 2015 © 2015 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40w 240mA 160V 230V Page 3 of 6
FeaturesSpecification item Value Remark ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection Yes Automatic recoveringHot wiring NoSuitable for fixtures with protection class I
Certificates and standardsSpecification item Value Unit ConditionApproval marks CE / ENECIngress Protection classification 20
Additional information
Inrush current
Specification item Value Unit ConditionInrush current Ipeak 5.3 A Input voltage 230VInrush current Twidth 70 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 24 pcs
Earth leakage currentSpecification item Value Unit ConditionEarth leakage current 0.7 mApk LED module contribution not included
Surge capabilitySpecification item Value Unit ConditionMains surge capability (L-N) 1 kVMains surge capability (L/N-Ground) 2 kV
January 28, 2015 © 2015 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40w 240mA 160V 230V Page 4 of 6
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
January 28, 2015 © 2015 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40w 240mA 160V 230V Page 5 of 6
Logistical dataSpecification item ValueProduct name CertaDrive 40w 240mA 160V 230VOrder code 99956000Logistic code 12NC 9290 009 34906EAN3 8718291999577Pieces per box 20
©2015 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The informationpresented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed withoutnotice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights. Data subject to change.
Date of release: January 28, 2015
www.philips.com/xitanium
Top Related