CBR-24-o-o
A B C D
CBR-24- 5.125 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625
CFR-24-o-o
A B C D
CFR-24- 5.125 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625
B + stroke A + stroke
CC D1/8-27 NPT both ports
1.562
AB
C D
C F R -2 4
1/8-27 NPT both ports
1.562
CDR-24-o-o
A B C D
CDR-24- 4.500 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
B + stroke A + stroke
CC D1/8-27 NPT both ports
1.562
STAINLESS STEEL
Technical Drawings
CRR-24-o-o
A B C D
CRR-24- 4.062 + 1.687 for each 1” of stroke 1.000 7/6-20 thd. x 0.750 3/4-16 thd. x 0.625
AB + stroke
C D1/8-27 NPT both ports
1.562
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
CSN-24-o-o
A B C D
CSN-24- 3.250 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625
CSR-24-o-o
A B C D
CSR-24- 3.250 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625
B A
C D1/8-27 NPT
1.562
AB
C D1/8-27 NPT
1.562
STAINLESS STEEL
Technical Drawings
EBR-24-o-o
A B C D
EBR-24- 4.468 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
EDR-24-o-o
A B C D
EDR-24- 4.250 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
B + stroke A
C D1/8-27 NPT both ports
1.562
B A + stroke
C D1/8-27 NPT both ports
1.562
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
EFR-24-o-o
A B C D
EFR-24- 4.468 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
B A
CD
ESN-24-o-o
A B C D
ESN-24- 3.000 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
ERR-24-o-o
A B C D
ERR-24- 3.812 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
B A
C D1/8-27 NPT
1.562
B + stroke A
C D1/8-27 NPT both ports
1.562
ESR-24-o-o
A B C D
ESR-24- 3.000 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. both ends x 0.625
B A
C D1/8-27 NPT
1.562
STAINLESS STEEL
Technical Drawings
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
FDR-oo-o-o
A B C F Port
FDR-08- 2.062 0.750 #10-32 thd. x 0.562 0.750 sq. #10-32
FDR-10- 2.062 0.750 #10-32 thd. x 0.562 0.750 sq. #10-32
FDR-12- 2.875 0.750 1/4-28 thd. x 0.562 1.000 sq. 1/8-27 NPT
FDR-17- 3.265 0.750 5/16-24 thd. x 0.562 1.250 sq. 1/8-27 NPT
FDR-24- 3.843 1.125 7/16-20 thd. x 0.750 1.750 sq. 1/8-27 NPT
FRR-24-o-o
A B C F
FRR-24- 3.593 + 1.687 for each 1” of stroke 1.125 7/16-20 thd. x 0.750 1.750 sq.
B A + stroke
C
port
F
FRR-24
B + stroke A
C
1/8-27 NPT
F
STAINLESS STEEL
Technical Drawings
FSR-oo-o-o
A B C F Ports
FSR-08- 1.875 + 0.937 for each 1/2” of stroke 0.687 #10-32 thd. x 0.562 0.750 sq. #10-32
FSR-10- 1.875 + 0.937 for each 1/2” of stroke 0.687 #10-32 thd. x 0.562 0.750 sq. #10-32
FSR-12- 2.218 + 1.687 for each 1” of stroke 0.718 1/4-28 thd. x 0.562 1.000 sq. 1/8-27 NPT
FSR-17- 2.578 + 1.562 for each 1” of stroke 0.718 5/16-24 thd. x 0.562 1.250 sq. 1/8-27 NPT
FSR-24- 3.406 + 1.687 for each 1” of stroke 1.125 7/16-20 thd. x 0.750 1.750 sq. 1/8-27 NPT
B A
Cports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
SBR-oo-o-o
A B C D F Ports
SBR-12- 3.093 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.875 dia. 1/8-27 NPT
SBR-17- 3.437 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SBR-24- 3.656 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SBR-32 4.562 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 2.075 dia. 1/4-18 NPT
B + stroke A
C Dports
F
STAINLESS STEEL
Technical Drawings
oo-SDD-oo-o-o
A B C D F
SDD-08- 2.812 0.625 #10-32 thd. both ends x 0.562 7/16-20 thd. both ends x 0.375 0.687 dia.
SDD-09- 2.964 0.625 #10-32 thd. both ends x 0.562 7/16-20 thd. both ends x 0.375 0.610 dia.
SDD-10- 2.812 0.625 #10-32 thd. both ends x 0.562 7/16-20 thd. both ends x 0.375 0.687 dia.
SDD-12- 4.000 0.625 1/4-28 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 0.875 dia.
SDD-14- 3.781 0.625 1/4-28 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 0.937 dia.
SDD-17- 4.031 0.625 5/16-24 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 1.125 dia.
SDD-20- 5.062 1.000 3/8-24 thd. both ends x 0.750 3/4-16 thd. both ends x 0.625 1.312 dia.
SDD-24- 4.562 1.000 7/16-20 thd. both ends x 0.750 3/4-16 thd. both ends x 0.625 1.562 dia.
SDD-28- 5.875 1.187 1/2-20 thd. both ends x 0.875 1-14 thd. both ends x 0.750 1.812 dia.
SDD-32- 5.687 1.250 1/2-20 thd. both ends x 0.875 1 1/4-12 thd. both ends x 0.812 2.075 dia.
SDD-40- 5.687 1.250 1/2-20 thd. both ends x 0.875 1 3/8-12 thd. both ends x 0.812 2.600 dia.
SDD-48- 6.562 1.625 5/8-18 thd. both ends x 1.250 1 1/2-12 thd. both ends x 0.992 3.125 dia.
B + stroke
CD
A + stroke B
1/8-24 NPT both ports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
SDH-oo-o-o
A B C D F
SDH-12- 4.000 0.625 1/4-28 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 0.875 dia.
SDH-14- 3.781 0.625 1/4-28 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 0.937 dia.
SDH-17- 4.031 0.625 5/16-24 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 1.125 dia.
B + stroke A + stroke
CD
1/8-24 NPT both ports
F
STAINLESS STEEL
Technical Drawings
oo-SDR-oo-o-o
A B C D F Ports
SDR-05- 1.562 0.375 #5-40 thd. x 0.340 3/8-24 thd. x 0.312 0.500 sq. #10-32
SDR-08- 2.125 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.687 dia. #10-32
SDR-09- 2.277 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.610 dia. #10-32
SDR-10- 2.125 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.687 dia. 1/8-27 NPT
SDR-12- 2.968 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.875 dia. 1/8-27 NPT
SDR-14- 2.937 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.938 dia. 1/8-27 NPT
SDR-17- 3.125 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SDR-20- 3.750 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 1.312 dia. 1/8-27 NPT
SDR-24- 3.437 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SDR-28- 4.375 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1.812 dia. 1/4-18 NPT
SDR-32- 4.312 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 2.075 dia. 1/4-18 NPT
SDR-40- 4.312 1.250 1/2-20 thd. x 0.875 1 3/8-12 thd. x 0.812 2.600 dia. 1/4-18 NPT
SDR-48- 4.875 1.625 5/8-18 thd. x 1.250 1 1/2-12 thd. x 0.992 3.125 dia. 3/8-18 NPT
SDR-14
B A + stroke
C D ports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
STAINLESS STEEL
Technical Drawings
SFD-oo-o-o
A B C D F
SFD-12- 4.125 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 0.875 dia.
SFD-17- 4.343 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. both ends x 0.562 5/8-18 thd. both ends x 0.500 1.125 dia.
SFD-24- 4.781 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. both ends x 0.750 3/4-16 thd. both ends x 0.625 1.562 dia.
B + stroke A
C D1/8-27 ports
F
SFR-oo-o-o
A B C D F Ports
SFR-12- 3.093 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.875 dia. 1/8-27 NPT
SFR-17- 3.437 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SFR-24- 3.656 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SFR-32- 4.562 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 2.075 dia. 1/4-18 NPT
B A
C Dports
F
TDR-oo-o-o
A B C F
TDR-12- 2.875 0.625 1/4-28 thd. x 0.562 1.000 sq.
TDR-17- 3.265 0.625 5/16-24 thd. x 0.562 1.250 sq.
TDR-24- 3.843 1.000 7/16-20 thd. x 0.750 1.750 sq.
B A + stroke
C
1/8-26 NPT both ports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
STAINLESS STEEL
Technical Drawings
SRR-oo-o-o
A B C D F Ports
SRR-05- 1.468 + 0.750 for each 1/2” of stroke 0.375 #5-40 thd. x 0.340 3/8-24 thd. x 0.312 0.500 sq. #10-32
SRR-08- 1.937 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.687 dia. #10-32
SRR-09- 2.011 + 1.614 for each 1” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.610 dia. #10-32
SRR-10- 1.937 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.687 dia. #10-32
SRR-12- 2.312 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.875 dia. 1/8-27 NPT
SRR-14- 2.312 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.937 dia. 1/8-27 NPT
SRR-17- 2.625 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SRR-20- 3.218 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 1.312 dia. 1/8-27 NPT
SRR-24- 3.187 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SRR-28- 3.718 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1.812 dia. 1/4-18 NPT
SRR-32- 3.546 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 2.075 dia. 1/4-18 NPT
B + stroke A
CD
ports
F
SSN-oo-o-o
A B C D F Ports
SSN-08- 1.312 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 0.562 dia. #10-32
SSN-09- 1.531 + 1.614 for each 1” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.610 dia. #10-32
SSN-10- 1.312 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 0.687 dia. #10-32
SSN-12- 1.500 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 1/2-20 thd. x 0.437 0.812 dia. 1/8-27 NPT
SSN-14- 1.843 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.937 dia. 1/8-27 NPT
SSN-17- 1.937 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SSN-20- 2.406 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 1.312 dia. 1/8-27 NPT
SSN-24- 2.187 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SSN-28- 2.656 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1.812 dia. 1/4-18 NPT
AB
CD
F
ports
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
SSR-oo-o-o
A B C D F Ports
SSR-05- 1.125 + 0.750 for each 1/2” of stroke 0.375 #5-40 thd. x 0.340 1/4-28 thd. x 0.312 0.348 dia. #10-32
SSR-08- 1.312 + 0.937 for each 1/2” stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 0.562 dia. #10-32
SSR-09- 1.531 + 1.614 for each 1” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 0.610 dia. #10-32
SSR-10- 1.312 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 0.687 dia. #10-32
SSR-12- 1.500 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 1/2-20 thd. x 0.437 0.812 dia. 1/8-27 NPT
SSR-14- 1.843 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 0.937 dia. 1/8-27 NPT
SSR-17- 1.937 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 1.125 dia. 1/8-27 NPT
SSR-20- 2.406 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 1.312 dia. 1/8-27 NPT
SSR-24- 2.187 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0750 3/4-16 thd. x 0.625 1.562 dia. 1/8-27 NPT
SSR-28- 2.656 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1.812 dia. 1/4-18 NPT
SSR-32- 3.031 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 2.075 dia. 1/4-18 NPT
B A
DC
F
ports
STAINLESS STEEL
Technical Drawings
TSR-oo-o-o
A B C F
TSR-12- 2.218 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 1.000 sq.
TSR-17- 2.578 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 1.250 sq.
TSR-24- 3.406 + 1.687 for each 1” of stroke 1.000 7/16-20 thd. x 0.750 1.750 sq.
B A
C
1/8-27 NPT both ports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
UBR-oo-o-o
A B C D F Ports
UBR-12- 4.156 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. both ends x 0.500 0.875 dia. 1/8-27 NPT
UBR-17- 4.312 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. both ends x 0.500 1.125 dia. 1/8-27 NPT
UBR-32- 5.937 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. both ends x 0.812 2.075 dia. 1/4-18 NPT
B + stroke A + stroke
STAINLESS STEEL
Technical Drawings
oo-UDR-oo-o-o
A B C D E F Ports
UDR-05- 2.187 0.375 #5-40 thd. x 0.340 3/8-24 thd. x 0.312 3/8-24 thd. x 0.375 0.500 sq. #10-32
UDR-08- 2.812 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 thd. x 0.500 0.687 dia. #10-32
UDR-09- 2.746 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 thd. x 0.437 0.610 dia. #10-32
UDR-10- 2.812 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 thd. x 0.500 0.687 dia. #10-32
UDR-12- 4.031 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 0.875 dia. 1/8-27 NPT
UDR-14- 3.843 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 0.937 dia. 1/8-27 NPT
UDR-17- 4.000 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 1.125 dia. 1/8-27 NPT
UDR-20- 4.875 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 3/4-16 thd. x 0.812 1.312 dia. 1/8-27 NPT
UDR-28- 5.937 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1-14 thd. x 0.907 1.812 dia. 1/4-18 NPT
UDR-32- 5.687 1.250 1/2-20 thd. x 0.875 1 1/14-12 thd. x 0.812 1 1/4-12 thd. x 0.875 2.075 dia. 1/4-18 NPT
UDR-40 5.687 1.250 1/2-20 thd. x 0.875 1 3/8-12 thd. x 0.812 1 3/8-12 thd. x 0.875 2.625 dia. 1/4-18 NPT
UDR-48 6.750 1.625 5/8-18 thd. x 1.250 1 1/2-12 thd. x 0.992 1 1/12-12 thd. x 1.250 3.125 dia. 3/8-18 NPT
B A + stroke
CD
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
UFR-oo-o-o
A B C D E F Ports
UFR-12- 4.156 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 0.875 dia. 1/8-27 NPT
UFR-17- 4.312 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 1.125 dia. 1/8-27 NPT
UFR-32- 5.937 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 1 1/14-12 thd. x 0.875 2.075 dia. 1/4-18 NPT
B A
CD E
ports
F
URR-oo-o-o
A B C D E F Ports
URR-05- 2.093 + 0.750 for each 1/2” of stroke 0.375 #5-40 thd. x 0.340 3/8-24 thd. x 0.312 3/8-24 x 0.375 0.500 sq. #10-32
URR-08- 2.625 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 x 0.500 0.687 dia. #10-32
URR-09- 2.480 + 1.614 for each 1” of stroke 0.625 #10-32 thd. both ends x 0.562 7/16-20 thd. x 0.375 7/16-20 x 0.437 0.610 dia. #10-32
URR-10- 2.625 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. both ends x 0.562 7/16-20 thd. x 0.375 7/16-20 x 0.500 0.687 dia. #10-32
URR-12- 2.718 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 x 0.625 0.875 dia. 1/8-27 NPT
URR-14- 2.906 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/18-18 x 0.625 0.937 dia. 1/8-27 NPT
URR-17- 3.062 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 x 0.625 1.125 dia. 1/8-27 NPT
URR-20- 4.716 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 3/4-16 x 0.812 1.312 dia. 1/8-27 NPT
URR-28- 4.937 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1-14 x 0.907 1.812 dia. 1/4-18 NPT
URR-32- 4.687 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/14-12 thd. x 0.812 1 1/14-12 x 0.875 2.075 dia. 1/4-18 NPT
B + stroke A
CD
STAINLESS STEEL
Technical Drawings
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
STAINLESS STEEL
Technical Drawings
USN-oo-o-o
A B C D E F Ports
USN-08- 2.000 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 7/16-20 thd. x 0.500 0.687 dia. #10-32
USN-09- 2.000 + 1.614 for each 1” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 thd. x 0.437 0.610 dia. #10-32
USN-10- 2.000 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 7/16-20 thd. x 0.500 0.687 dia. #10-32
USN-12- 2.562 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 1/2-20 thd. x 0.437 5/8-18 thd. x 0.625 0.875 dia. 1/8-27 NPT
USN-14- 2.750 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 0.937 dia 1/8-27 NPT
USN-17- 2.828 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 1.125 dia. 1/8-27 NPT
USN-20- 3.531 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 3/4-16 thd. x 0.812 1.312 dia. 1/8-27 NPT
USN-28- 4.218 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1-14 thd. x 0.907 1.812 dia. 1/4-18 NPT
B A
C D Eports
F
USR-oo-o-o
A B C D E F Ports
USR-05- 1.750 + 0.750 for each 1/2” of stroke 0.375 #5-40 thd. x 0.340 1/4-28 thd. x 0.312 3/8-24 thd. x 0.375 0.437 sq. #10-32
USR-08- 2.000 + 0.937 for each 1/2” stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 7/16-20 thd. x 0.500 0.687 dia. #10-32
USR-09- 2.000 + 1.614 for each 1” of stroke 0.625 #10-32 thd. x 0.562 7/16-20 thd. x 0.375 7/16-20 thd. x 0.437 0.610 dia. #10-32
USR-10- 2.000 + 0.937 for each 1/2” of stroke 0.625 #10-32 thd. x 0.562 3/8-24 thd. x 0.312 7/16-20 thd. x 0.500 0.687 dia. #10-32
USR-12- 2.562 + 1.687 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 1/2-20 thd. x 0.437 5/8-18 thd. x 0.625 0.875 dia. 1/8-27 NPT
USR-14- 2.750 + 1.562 for each 1” of stroke 0.625 1/4-28 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 0.937 dia. 1/8-27 NPT
USR-17- 2.828 + 1.562 for each 1” of stroke 0.625 5/16-24 thd. x 0.562 5/8-18 thd. x 0.500 5/8-18 thd. x 0.625 1.125 dia. 1/8-27 NPT
USR-20- 3.531 + 1.812 for each 1” of stroke 1.000 3/8-24 thd. x 0.750 3/4-16 thd. x 0.625 3/4-16 thd. x 0.812 1.312 dia. 1/8-27 NPT
USR-28- 4.218 + 2.000 for each 1” of stroke 1.187 1/2-20 thd. x 0.875 1-14 thd. x 0.750 1-14 thd. x 0.90 1.812 dia. 1/4-18 NPT
USR-32- 4.406 + 2.000 for each 1” of stroke 1.250 1/2-20 thd. x 0.875 1 1/4-12 thd. x 0.812 1 1/4-12 thd. x 0.875 2.075 dia. 1/4-18 NPT
USR-17
B A
CD E
ports
F
Note: Certain Options may cause the overall length of the cylinder to change. View complete 2D drawings and 3D CAD models at clippard.com.
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
3BDD-o
3CD-o
3CS-1
3CS-3
3SD-o
3BDS-o
3CS-1/2
3CS-2
3PS-1/2
3SS-1/2
0.750 + stroke
2.656 + stroke
#10-32 mtg.
0.750#10-32 port
0.750
0.75 2.791 + stroke0.500 0.125
#10-32 ports0.125 dia.
0.500
3SD
0.750
5/16-24 thd.x 0.312
#10-32 port typ.
2.562 + stroke
0.500
#8-32 thd.x 0.375
0.468 1.782
#10-32 port typ.
0.75
5/16-24 thd.x 0.312
2.093
#10-32 port
0.437
3 BDS
0.750
0.7502.140 + stroke
#10-32 mtg.
#10-32 ports
0.750 2.4680.500
0.125
0.125 dia.#10-32 port
0.437
3CS
0.750 3.4060.500 0.125
0.125 dia.#10-32 port
0.437
0.750 5.2810.500
0.125
0.125 dia.#10-32 port
0.437
0.437
0.750 7.1560.500
0.125
0.125 dia.#10-32 port
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
3SS-1
3SS-3
7D-o
7S-1
7SS-1
3SS-2
3SS-AR-1/2
7DD-o
7SD-o
7SS-AR-1
0.75
5/16-24 thd.
3.343
#10-32 port
0.437
0.75
5/16-24 thd.
7.093
#10-32 port
0.437
1.000
1/4-28 thd.x 0.750
4.343
3/4-20 thd.x 0.625
1/8-27 NPT
1.000
1.000
1/4-28 thd.x 0.750 3/4-20 thd.
x 0.6251/8-27 NPT both ports
3.906 + stroke
1.000
1.000
1.000
1/4-28 thd.x 0.750 3/4-20 thd.
x 0.625
5.280
1/8-27 NPT0.250 dia.
0.75
5/16-24 thd.
5.218
#10-32 port
0.437
0.500
1.250
#5-40 thd.x 0.375 5/16-24 thd.
x 0.312#10-32 port
2.687
1/4-28 thd.x 0.750
2.000 4.655
3/4-20 thd.x 0.625
1/8-27 NPT
1.000
1/4-28 thd.x 0.750
1.000 + stroke
3/4-20 thd. x 0.625
3.906 + stroke 1.000
1/8-27 NPT both ports
1.000
1.000
1/4-28 thd.x 0.750 3/4-20 thd.
x 0.625
2.968 + stroke
1/8-27 NPT typ.
1.000
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
9BDD-o
9BS-3/4
9BS-2 1/4
9CD-o
9CS-1 1/2
9BDS-o
9BS-1 1/2
9BS-3
9CS-3/4
9CS-2 1/4
0.750 +stroke
#10-32 ports
1/4-20 mtg.
3.015 + stroke 0.750
1.000
0.75
1/4-20 mtg
2.750#10-32 port
1.000
0.625
0.75 4.7030.750
#10-32 port
0.250
0.75
1/4-20 mtg
5.593#10-32 port
1.000
9 B D S
0.75
#10-32 ports
1/4-20 mtg.
2.469 + stroke
1.000
0.75
1/4-20 mtg
4.218#10-32 port
1.000
0.625
0.75 6.0620.750
#10-32 port
0.250
0.75
1/4-20 mtg
6.937#10-32 port
1.000
0.75 3.3430.750
#10-32 port
0.250 0.625
9 C D
0.75 3.312 + stroke
#10-32 port typ.
0.750
0.187 dia.
0.250 0.625
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
9CS-3
9SD-o
9SS-1 1/2
9SS-3
H9C-oD
9PS-3/4
9SS-3/4
9SS-2 1/4
9SS-AR-1
H9C-1S
0.750 7.4210.750
#10-32 port
0.250 0.625
0.750
1/4-28 thd.x 0.625 1/16-27 NPT
3.718 + stroke
1/2-20 thd.
0.687
0.750 4.531
#10-32 ports15/32-32 thd.
x 0.500
0.625
0.750 3.031
#10-32 ports15/32-32 thd.
x 0.500
0.625
1/4-28 thd.x 0.625
0.750
1/16-27 NPT1/2-20 thd.
3.875
0.250 dia.
0.687
0.750 5.875
#10-32 ports15/32-32 thd.
x 0.500
0.625
1/4-28 thd.x 0.625
1.750 4.359
1/16-27 NPT port1/2-20 thd.x 0.500
0.687
0.750 7.250
#10-32 ports15/32-32 thd.
x 0.500
0.625
0.75
15/32-32 thd.x 0.500
2.937 + stroke0.312
#10-32 port typ.
0.625
#10-32 thd.x 0.625
2.531
#10-32 port typ.
0.750
0.625
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
H9C-2S
H9D-oD
H9S-1S
H9S-3S
H9U-1S
H9C-3S
H9S-oD
H9S-2S
H9U-oD
H9U-2S
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
x 0.500
3.593
1/16-27 NPT
0.687
1/4-28 thd.x 0.625
0.750
1/16-27 NPT1/2-20 thd.
5.531
0.250 dia.
0.687
1/4-28 thd.x 0.625
0.750
1/16-27 NPT1/2-20 thd.
7.187
0.250 dia.
0.687
0.687
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
x 0.500
3.437 + stroke
1/16-27 NPT typ.
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
x 0.500
5.250
1/16-27 NPT
0.687
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
4.218 + stroke
1/16-27 NPT typ. 0.250 dia.
0.687 0.687
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
x 0.500
6.906
1/16-27 NPT
0.750
1/4-28 thd. x 0.625 1/2-20 thd.
x 0.5001/16-27 NPT typ.
4.687 + stroke 0.750 + stroke
0.687
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
both ends
6.031
0.250 dia.1/16-27 NPT
0.687
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
both ends
7.687
0.250 dia.1/16-27 NPT
0.687
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
H9U-3S
SM-3-1
SM-3-3
SM-6
1.171
#10-32 thd. #3-56 thd.
0.125
0.188
2.000
#10-32 thd. #3-56 thd.
0.125
0.188
SM-2
SM-3-2
SM-3-4
1.593
#10-32 thd. #3-56 thd.
0.125
0.188
0.500 1.312
#10-32 thd.#6-32 thd.
x 0.375
0.312
0.750
#10-32 thd. #3-56 thd.
0.125
0.188
0.740
#10-32 thd. #3-56 thd.
0.125
0.188
0.750
1/4-28 thd.x 0.625 1/2-20 thd.
both ends
7.687
0.250 dia.1/16-27 NPT
0.687
BRASS
Technical Drawings
877-245-6247 | clippard.com
CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001
Top Related