www.vdocyclecomputing.com
Dealer Catalogue 2012
VDO_Haendlerkatalog_2011_12_GB.indd 1 17.08.11 13:48
www.vdocyclecomputing.com
Visit us!
Product comparison:
Tabular comparison of two models.
Distributor Search:
No matter where – Your retail customers will find
you by your country by country locator.
Microsites:
WEBSITE
VDO_Haendlerkatalog_2011_12_GB.indd 2 17.08.11 13:48
YEAR
WARRANTY
DATA SAFEDATA SAFE
VDO-Warranty
Water Resistant
EASY MENU CONTROL
Battery Status Display
Analogue Wireless Technology
Integrated Heart Rate
Data storage during battery replacement
Integrated Altimeter
Display backlight
ANT+ wireless protocol*
PC Analysis
Prepared for optional digital cadence
DIGITAL WIRELESS technology
SMART SET BOX
Wattage (Virtual Power)
Hiking Mode
VDO CYCLECOMPUTING – DEALER CAT CON OVERVIEW
*ANT+ is a registered trademark of Dynastream Inc.
ICON OVERVIEW
VDO_Haendlerkatalog_2011_12_GB.indd 1 17.08.11 13:48
B Images Title / p. 8 / p. 26 / p. 31 / p. 36
with courtesy of Multivan Merida Biking Team, Merida Europe GmbH
B Image p. 28 top Copyright Jean Schweitzer, 2009 used under license from Shutterstock.com
B Image p. 28 bottom Copyright Danny Warren, 2009 used under license from Shutterstock.com
B Image p. 27 / p. 30 / p. 34 Copyright, 2010 used under license from fotolia.de
VDO CYCLECOMPUTING – DeALeR CAtALOG 2011 – iCOn OveRview
*ANT+ is a registered trademark of Dynastream Inc.
Contents
4 – 11 MC 2.0
4 introduction
9 Models
10 Function overview
11 Accessories
12 – 15 SERIES-A
12 introduction
14 Models
15 Function overview / Accessories
16 – 21 SERIES-X
16 introduction
18 Models
20 Function overview
21 Accessories
22 – 29 SERIES-Z
22 introduction
26 Models
28 Function overview
29 Accessories
30 – 31 PC-Sport analysis software
32 POS
33 Service support / Smart Set Box SSB
34 Quality management
35 Contact
NEW!
CONTENTS
COntentsiCOn OveRview
VDO_Haendlerkatalog_2011_12_GB.indd 3 17.08.11 13:48
03
Dear stockist,
Nothing is more constant than change.
For 2012 as well, we have again prepared a number of innovations.
MC 2.0 Can you make a good product even better? Yes, you can. The new MC 2.0 is the latest
technological upgrade of an already tested and proven product. The MC 2.0 comes
with a digital wireless transmission, selection option for heart rate or cadence,
display backlight, battery status display and data storage during battery replacement.
As before, the MC 2.0 has both cable and wireless versions.
The Series-A The new Series-A has surpassed all our expectations. For this reason bottlenecks
too came about at the start of deliveries. We hope you will understand with hindsight.
For 2012 we have done minor facelift on the new Series-A. The brackets for the cable
and wireless versions were technically standardized. The transmitting range was
slightly increased.
Series-X The Series-X remains unchanged in the product range. With just 0.1% warranty
return rate, the Series-X is qualitatively the best series VDO has ever built.
Very high reliability and smooth functioning are the result of our continuous
quality management.
Series-Z The new MC 2.0 replaces the Z1 in the product range. The Z2 with heart rate
measurement and Z3 with altitude and heart rate measurements remain in
the range, just as the PC link versions with the PC Sport analysis software.
As you see, there are constant changes at VDO.
We wish you every success with our product range.
With kind regards
H.J. Noenen
Management
eDitORiAL
VDO CYCLECOMPUTING – DeALeR CAtALOG 2011 – eDitORiAL
VDO_Haendlerkatalog_2011_12_GB.indd 3 17.08.11 13:48
MC 2.0 WR MC 2.0 WL
04
MC 2.0
Altitude measurement version 2.0
Track Cycling
Downhill
Freeride
X-Country
Marathon
Road Bike
Touren / Trekking
City
Commuting
VDO CYCLECOMPUTING – MC 2.0
the MC 2.0
The new MC 2.0 offers:
Either altitude measurement + heart rate or altitude measurement + cadence
Simple use
Everything in view, the most important details on display at once
Digital wireless transmission for speed + heart rate or speed + cadence
Menu system for settings
Display backlight
Data storage during battery replacement
Battery warning when the battery is weak
2 home altitudes, adjustable
Stopwatch direct access
Altitude correction during transport
Altitude measurement uphill and downhill
For dealers: Adjustable via SSB
All information quickly on call
Recommended use
MC 2.0 quickscreen
VDO_Haendlerkatalog_2011_12_GB.indd 4 17.08.11 13:48
Permanent** im Display
05
MC 2.0
MENUCLEAR PERMAMENT IN DISPLAY*
Speed Temperature Current altitude Current gradient uphill / downhill Current heart rate or current cadence*
* with installed heart rate transmitter / with installed cadence transmitter
HR / CAD
With installed HEART RATE transmitter Average heart rate Maximum heart rate Calories burnt Time below the set training zone Time in the set training zone Time above the set training zone Stopwatch Clock
With installed cadence transmitter Average cadence Maximum cadence Time below the set cadence zone Time in the set cadence zone Time above the set cadence zone Stopwatch Clock
With no other installed transmitter: Stopwatch Clock
ALTI
Uphill altitude difference Uphill altitude difference bike 1 / bike 2 Uphill altitude difference total (bike 1 + bike 2) Maximum altitude of the trip Maximum altitude bike 1 / bike 2 Average ascending gradient Maximum ascending gradient Downhill altitude difference Downhill altitude difference bike 1 / bike 2 Downhill altitude difference total
(bike 1 + bike 2) Average descending gradient Maximum descending gradient
BIKE
Trip distance Total distance bike 1 / bike 2 Total distance bike 1 + 2 Ride time Ride time bike 1 / bike 2 Total combined ride time Average KMH Max KMH Navigator (2nd trip distance counter)
With MC 2.0, either heart rate data or cadence data can also be displayed. In a selection menu it is defined whether heart rate, cadence or no other information should be displayed. All heart rate functions are located on the button HR / CAD. The heart rate / cadence functions can be accessed sequentially by pressing a button.
Heart rate functions: Average / maximum heart rate on the current trip Calories burnt on current trip Time when the heart rate
– was below the set lower limit – was in the set training zone – was above the set upper limit A beeper emits a signal when the current heart rate exceeds the set upper limit or is below the set lower limit. The beeper can be turned off.
3 training zones can be selected in the MC 2.0: The FIT and FAT zones are automatically calculated from the set
personal data and from the personal maximum HR. The values for the OWN zone are similarly calculated, but can
be adjusted individually. The training zone can be selected directly via a short-cut button.
Cadence functions Average / maximum cadence on the current trip Time when the cadence
– was below the set lower limit – was in the set training zone – was above the set upper limit
In addition, the heart rate / cadence will be permanently shown on the display.
For both the heart rate and cadence measurement, the indicators show whether the heart rate/cadence:
is below the lower limit is above the upper limit is in the selected training zone
All information quickly on call
heart rate or cadence ?
VDO CYCLECOMPUTING – MC 2.0
MC 2.0
VDO_Haendlerkatalog_2011_12_GB.indd 5 17.08.11 13:48
VDO CYCLECOMPUTING – MC 2.006
MC 2.0
MAGNET
STOP STOP
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
Battery indicator
The MC 2.0 provides information on the
display when the battery level drops below
a critical level. The user then has sufficient
time to replace the battery.
All data and settings are saved during battery
replacement.
Display with backlight
The MC 2.0 has a large illuminated display.
The backlight is switched on for 5 seconds
after pressing the button.
Digital wireless transmission
CODED DATA TRANSMISSION
SAVING AND CODING OF DATA
INTEGRATED RECEIVER
NO FAILURE POSSIBLE
NO FAILURE POSSIBLE
SPEED TRANSMITTER CADENCE TRANSMITTER
MAGNETIC IMPULSE
HEART RATE TRANSMITTER
OR
DW stands for “Digital Wireless” and “Double Wireless”
The MC 2.0 has a 2-channel digital wireless transmission.
It can receive either:
speed + heart rate or
speed + cadence
Note: Heart rate and cadence cannot be received simultaneously.
Each transmitter generates its own coding. Thus, “cross-talking”
is effectively prevented while riding in a group.
The pairing of the transmitter with the computer is carried out
automatically in MC 2.0.
Insert computer into the handlebar bracket and set off;
computer does the pairing on its own.
The MC 2.0 also has automatic bike recognition.
It recognizes when the computer is used on bike 1 or bike 2.
With a 75 cm range (30 inches) for the speed transmitter,
90 cm (35 inches) for the cadence transmitter and
90 cm (35 inches) for the heart rate transmitter all normal
mounting positions are covered.
Powerful design
A cool design with powerful shapes and
edges was the challenge to the designer.
MAGNET
VDO CYCLECOMPUTING – MC 2.0
VDO_Haendlerkatalog_2011_12_GB.indd 6 17.08.11 13:49
07VDO CYCLECOMPUTING – MC 2.0
MC 2.0
CLEAR MENU
Data storage during replacement of battery
When replacing batteries, all settings (wheel size) and
all data (total distance, trip time) are stored. A permanent
memory ensures that the data is not lost even if the
battery fails.
The altitude functions
The new MC 2.0 makes altitude measurements both UPHILL
and DOWNHILL.
All altitude functions are on the button “ALTI”. The
functions are accessed by pressing the button sequentially.
Uphill altitude difference, for current trip
In the submenu:
– Uphill altitude difference total bike 1 / bike 2
– Uphill altitude difference total (bike 1 + bike 2)
Maximum altitude of a trip
In the submenu:
– Maximum altitude of all trips with bike 1 / bike 2
Average ascending gradient of a trip, in percentage
Maximum ascending gradient, in percentage
Downhill altitude difference, for current trip
In the submenu:
– Downhill altitude difference total for bike 1 / bike 2
– Downhill altitude difference total (bike 1 + bike 2)
Average descending gradient of a trip, in percentage
Maximum descending gradient of a trip, in percentage
In addition, permanently shown in the display:
Current altitude
Current gradient uphill / downhill
Current temperature
The MC 2.0 has a transport function, which corrects the
current altitude automatically, when the MC 2.0 is for instance
transported in the car (for this the MC 2.0 must be in the
handlebar bracket).
The home altitude can be selected or the current altitude
adjusted directly via a short-cut button.
Two selectable home altitudes
Current altitude can be set in meters
or sea level pressure
RESET the actual
trip data
Access to
submenu
MORE
SETTINGS
Simple operation with Easy Menu Control
PERMANENT MEMORY
DURING BATTERY CHANGE
WHEN BATTERY FAILS
VDO CYCLECOMPUTING – MC 2.0
Simple and intuitive, the EMC operating system enables
operation while riding and the computer settings to be
made when first used.
All settings can be accessed from a common menu.
VDO_Haendlerkatalog_2011_12_GB.indd 7 17.08.11 13:49
MC 2.0
08 VDO CYCLECOMPUTING – MC 2.0
24 x 1 3/8
26 x 1.9
26 x 2.35
20 – 622
SMART SET BOX SSB
You can set the computer with the SBB in no time. Language, time, wheel size and total distance can be set with a few button clicks. The computer can be set in a matter of seconds. Even the RESET can be done with the SSB. With the SSB you can make a total reset, or a reset of trip distance or riding time according to your choice. You can also use the SSB as a test station in the workshop.
Wheel size setting via tyre table
With the MC 2.0, the wheel size can optionally be
selected using a tyre table or, as before, set in
millimeters or inches. Thus the wheel size setting
is even more convenient.
Stopwatch, quick access
3-2-1 Start
Press a button and the stopwatch is in the display ... and it runs. The MC 2.0 has a direct access to the stopwatch, whereby you can access it from any function by pressing a button. The stopwatch is on the display immediately and runs or is stopped.
VDO_Haendlerkatalog_2011_12_GB.indd 8 17.08.11 13:49
MC 2.0
09VDO CYCLECOMPUTING – MC 2.0 wR / MC 2.0 wL
YEAR
WARRANTY
DATA SAFE
YEAR
WARRANTY
DATA SAFE
MC 2.0 WLRef. No. 2100
Digital wireless transmission
MC 2.0 WRRef. No. 2000
Wired speed transmission
Cycling functions
Current speed, in increments of 0.5 KMH or MPH Trip distance, up to 999.99 KM or M Ride Time up to 99:59:59 Average speed, with 2 decimal places Maximum speed on a trip distance,
with 2 decimal places Navigator, second, independent trip distance,
counter Total distance for bike 1 / bike 2,
up to 99,999 KM or M Total distance for bike 1 + bike 2,
up to 199,999 KM or M Total ride time bike 1 / bike 2,
up to 999:59 HHH:MM Total ride time bike 1 + bike 2,
up to 1999:59 HHH:MM Permanent comparison of current speed with
the average speed Stopwatch (to be started / stopped manually) Clock (current time)
Altimeter functions
Uphill altitude difference, for current trip Uphill altitude difference total for bike 1 / bike 2 Uphill altitude difference total (bike 1 + bike 2) Maximum altitude of a trip Maximum altitude of all trips with bike 1 / bike 2 Average ascending gradient of a trip,
in percentage Maximum ascending gradient, in percentage Downhill altitude difference, for current trip Downhill altitude difference total for bike 1 / bike 2 Downhill altitude difference total (bike 1 + bike 2) Average descending gradient of a trip,
in percentage Maximum descending gradient of a trip,
in percentage Current altitude Current gradient uphill / downhill Current temperature Automatic altitude correction during transport 2 selectable home altitudes Current altitude can be set in meters or
sea level pressure Further features
Digital wireless transmission DW, 2-channel receiver for speed + heart rate or speed + cadence
Automatic pairing Automatic bike recognition bike 1 or bike 2 Display backlight Battery status display Data storage during battery replacement Settings with Up / Down menu Clear function Full text display in 7 languages Can be used for 2 bikes Wheel sizes can be set via tyre table
Package contents MC 2.0 WL
Computer, battery 3 V, type 2032, battery compartment lid, handlebar bracket, digital transmitter, battery 3 V, type 2032, rubber pad, spoke magnet and cable ties
Heart rate functions (optional)
Note: Heart rate and cadence cannot be received simultaneously.
Current heart rate Average heart rate on the current trip Maximum heart rate on the current trip Calories burnt on current trip Time when the heart rate is below the set
lower limit Time when the heart rate is in the set
training zone Time when the heart rate is above the set
upper limit Heart rate display Beeper (switch-off-able) when heart rate
– is below the lower limit – above the upper limit
Indicator when heart rate is – below the lower limit – in the training zone – above the upper limit
3 trainig zones: FIT, FAT and OWN zones
Cadence functions (optional)
Note: Heart rate and cadence cannot be received simultaneously.
Current cadence Average cadence current trip Maximum cadence current trip Time below the set lower limit Time in the set training zone Time above the set training zone Indicator when cadence is
– below the lower limit – in the training zone – above the upper limit
For dealers: Basic settings and test via SSB
Cycling functions
Current speed, in increments of 0.5 KMH or MPH Trip distance, up to 999.99 KM or M Ride Time up to 99:59:59 Average speed, with 2 decimal places Maximum speed on a trip distance,
with 2 decimal places Navigator, second, independent trip distance,
counter Total distance for bike 1 / bike 2,
up to 99,999 KM or M Total distance for bike 1 + bike 2,
up to 199,999 KM or M Total ride time bike 1 / bike 2,
up to 999:59 HHH:MM Total ride time bike 1 + bike 2,
up to 1999:59 HHH:MM Permanent comparison of current speed with
the average speed Stopwatch (to be started / stopped manually) Clock (current time)
Altimeter functions
Uphill altitude difference, for current trip Uphill altitude difference total for bike 1 / bike 2 Uphill altitude difference total (bike 1 + bike 2) Maximum altitude of a trip Maximum altitude of all trips with bike 1 / bike 2 Average ascending gradient of a trip,
in percentage Maximum ascending gradient, in percentage Downhill altitude difference, for current trip Downhill altitude difference total for bike 1 /
bike 2 Downhill altitude difference total
(bike 1 + bike 2) Average descending gradient of a trip,
in percentage Maximum descending gradient of a trip,
in percentage Current altitude Current gradient uphill / downhill Current temperature Automatic altitude correction during transport 2 selectable home altitudes Current altitude can be set in meters or
sea level pressure
Further features
Display backlight Battery status display Data storage during battery replacement Settings with Up / Down menu Clear function Full text display in 7 languages Can be used for 2 bikes Wheel sizes can be set via tyre table
Package contents MC 2.0 WR
Computer, battery 3 V, type 2032, battery compartment lid, handlebar bracket, rubber pad, spoke magnet and cable ties
OPTIONAL
OPTIONAL
VDO_Haendlerkatalog_2011_12_GB.indd 9 17.08.11 13:49
10
MC 2.0 WR
MC 2.0 WR
MC 2.0 WL
MC 2.0 WL
MC 2.0 / FUnCtiOn OveRview
CYCLING FUNCTIONS
Digital wireless transmission Speed
Digital heart rate option
Digital cadence option
Current speed
Trip distance
Total distance (bike 1 + bike 2)
Total distance bike 1
Total distance bike 2
Trip time current
Total trip time bike 1
Total trip time bike 2
Total trip time combined
Average KMH
Comparison KMH / to average
Max. speed
Second trip distance counter
Clock
Stopwatch
HEART RATE FUNCTIONS*
Current, average and maximum heart rate
Time in, below and above training zone
Calories burnt
Selectable training zones 3
Optical signal for heart rate transmission
Acoustic signal for above / below set values (switch-off-able)
Heart rate zone indicator
CADENCE FUNCTIONS *
Current, average and maximum cadence
Time in, below and above training zone
Adjustable training zones
Optical signal for cadence transmission
Cadence zone indicator
* Available only when heart rate or cadence transmitter is installed
ALTIMETER FUNCTIONS
Current altitude
Current gradient
Current temperature
Day's gain uphill
Maximum day's altitude
Average gradient uphill
Max. gradient uphill
Total altitude gain bike 1 / bike 2 / combined
Maximum altitude bike 1 / bike 2
Day's loss downhill
Average gradient downhill
Max. gradient downhill
Total downhill altitude loss bike 1 / bike 2 / combined
Adjustable home altitudes 2 2
Recalibration of current altitude
Automatic altitude correction during transport
FURTHER FEATURES
Digital wireless transmission DW, 2-channel receiver for speed + heart rate or speed + cadence
Stopwatch - quick access
Sleep mode with auto wake-up
Total distance adjustable
Automatic pairing
Automatic bike recognition bike 1 or bike 2
Display backlight
Battery status display
Data storage during battery replacement
Settings with Up / Down menu
Clear function
Full text display in 7 languages
Can be used for 2 bikes
Wheel sizes can be set via tyre table
For dealers:Basic settings and test using SSB
VDO CYCLECOMPUTING – MC 2.0 – FUnCtiOn OveRview
VDO_Haendlerkatalog_2011_12_GB.indd 10 17.08.11 13:49
11VDO CYCLECOMPUTING – MC 2.0 – ACCessORies
Wireless model – MC 2.0 WLGeneral – MC 2.0 WR / MC 2.0 WL
Wired model – MC 2.0 WR
HEART RATE KIT MC 2.0 WLRef. No. 7704
Package contents: 1 heart rate transmitter including battery 1 elastic strap
WIRELESS KIT MC 2.0 WLReference No 7706
Assembly - Kit Wireless MC 2.0,including magnetPackage contents: 1 universal bracket,1 transmitter including battery 3 V,1 clip magnet, cable ties
CAD KIT MC 2.0 WLRef. No. 7705
CAD - KIT for MC 2.0, Digital wireless cadence extension including transmitter, cadence magnet and battery 3 VPackage contents: 1 cadence transmitter, 1 battery 3 V, 1 cadence magnet, cable ties
CAD MAGRef. No. 4411
Cadence magnet for mounting on the crank, for Series-X DW, MC 2.0Package contents: cadence magnet, cable ties
UMWLRef. No. 5503
Universal bracket for handlebars and stemWirelessPackage contents: 1 universal bracket, cable ties
BAT 3 VRef. No. 1013
Battery 3 V, Type 2032 Package contents: battery 3 V
CMAG S / M Ref. No. 4410
Clip Magnet S / M for round spokes up to 2.3 mm or flat spokes up to 3.4 mm Package contents: clip magnet
CMAG L / XL Ref. No. 4412
Clip Magnet L / XL for round spokes up to 3.2 mm or flat spokes up to 5.4 mm Package contents: clip magnet
UMW 75 Ref. No. 5502
Universal bracket for handlebars and stem Cable length: 0.75 mPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad, cable ties
UMW 150Ref. No. 5504
Universal bracket for handlebars and stemCable length: 1,5 mPackage contents: 1 handlebar bracket with cable and sensor, 1 rubber pad, cable ties
UMW KITRef. No. 5505
Assembly - Kit Cable including magnetPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad,1 clip magnet, cable ties
MC 2.0 / ACCessORies
VDO_Haendlerkatalog_2011_12_GB.indd 11 17.08.11 13:49
12
Ø 35 mm
A4 A4+ A8+A8
Better readability
The display has become even bigger. With a new font design, the numbers and letters are significantly easier to read. Display technology is also new. The green back-ground increases the contrast and facilitates reading even in full sunlight.
Large buttons
Large buttons with a well-defined pressure point ensure easy operation, even with gloves.
The models in the Series-A have been designed for cyclists of all age groups, hobby cyclists, those cycling on long trips, sporty holidays, weekend excursions and to and from work, but also for serious cyclists. For an entry-level price, even the cost-conscious sports and leisure cyclist can now get hold of the advanced technology and fine design from VDO.
A vDO for any case
the seRies-A
Downhill
Freeride
X-Country
Marathon
Road Bike
Track Cycling
Touren / Trekking
City
Commuting
Recommended use Ø 35 mm
seRies-A
VDO CYCLECOMPUTING – seRies-A
VDO_Haendlerkatalog_2011_12_GB.indd 12 17.08.11 13:50
13
20SEK.
Proven operation
The operation is very easy via two large and smooth buttons – one button for accessing the functions and another for the setting modes.
Setting mode
The SET button activates the setting mode
Bike functions
B Current speed
B Trip distance
B Clock
B Total distance
B Average speed
B Maximum speed
B Ride time
B Comparison current speed to average
RESET
SET + MODE button
High speed 40 KMH
Low speed 20 KMH
Number of waves (impulses) per time unit
Analog wireless technology
Wireless waves represent speed.
Data storage during battery replacement
When replacing batteries,
all programmed values are
retained up to 20 seconds –
that will be enough time for
you to insert the new battery.
Universal bracket for handlebar and stem mounting
All models of the Series-A are
supplied with the universal
bracket for handlebars and
stem.
New design
Fresh colors and racy lines; these were
the guidelines for the designer.
The Series-A can be set on the VDO
Smart Set Box. Wheel size, time and total
distance can be set on the SSB quickly
and easily. A function test of the Series-A
can be done just as quickly. Test is not
possible for wireless models.
seRies-A
VDO CYCLECOMPUTING – seRies-A
Smart Set Box SSB
VDO_Haendlerkatalog_2011_12_GB.indd 13 17.08.11 13:50
14
WIRELESS WIRELESS
YEAR
WARRANTY
YEAR
WARRANTY
YEAR
WARRANTY
YEAR
WARRANTY
seRies-A / wiReD MODeLs / A4 / A8
seRies-A / wiReLess MODeLs / A4+ / A8+
Cycling functionsB Current speedB Trip distanceB ClockB Total distance
Further featuresB Total distance adjustableB Sleep mode (display shut-off)B Automatic Start / StopB Universal Twist-Click bracket for handlebar and stemB KM / MI selectableB Data storage during battery replacement
Package contents
computer, battery 3 V type 2032, battery compartment lid, universal handlebar / stem bracket with cable and sensor, rubber pad, spoke magnet, cable ties
For dealers
Adjustable via Smart Set Box SSB
B Data storage during battery replacement
Package contents
computer, analog transmitter, battery 3 V type 2032, battery 12 V, computer & transmitter, battery compartment lid, universal handlebar / stem bracket, rubber pad, spoke magnet, cable ties
For dealers
Adjustable via Smart Set Box SSB
Cycling functionsB Current speedB Trip distanceB ClockB Total distanceB Average speedB Maximum speedB Ride timeB Comparison of current/ average speed
Further featuresB Total distance adjustableB Sleep mode (display shut-off)B Automatic Start / StopB KM / MI selectable
Cycling functionsB Current speedB Trip distanceB ClockB Total distanceB Average speedB Maximum speedB Ride timeB Comparison of current / average speed
Further features
Wireless, analog transmissionB Total distance adjustableB Sleep mode (display shut-off)B Auto start / stop up to 5 hrs.
Cycling functionsB Current speedB Trip distanceB ClockB Total distance
Further features
Wireless, analog transmissionB Total distance adjustableB Sleep mode (Display shut-off)B Auto start / stop up to 5 hrs.B Universal Twist-Click -bracket for handlebar and stemB KM / MI display selectable
A4Ref. No. 1100
A8Ref. No. 1200
A4+Ref. No. 1101
A8+Ref. No. 1201
B Universal Twist-Click bracket for handlebar and stemB Data storage during battery replacement
Package contents
computer, battery 3 V type 2032, battery compartment lid, universal handlebar/stem bracket with cable and sensor, handlebar clamp, rubber pad, spoke magnet, cable ties
For dealers
Adjustable via Smart Set Box SSB
B KM / MI selectableB Universal Twist -Click-bracket for handlebar and stemB Data storage during battery replacement
Package contents
computer, analog transmitter, battery 3 V type 2032, battery 12 V, computer & transmitter, battery compartment lid, universal handlebar/stem bracket, rubber pad, spoke magnet, cable ties
For dealers
Adjustable via Smart Set Box SSB
VDO CYCLECOMPUTING – seRies-A – MODeLs
VDO_Haendlerkatalog_2011_12_GB.indd 14 17.08.11 13:50
A4 A4A8 A8A4+ A4+A8+ A8+
15
WIRELESS
WIRELESS
WIRELESS
WIRELESS
Max. speed
Clock
Automatic Start / Stop *
Short function text
Sleep mode
Total distance adjustable
For dealers:Settable viaSmart Set Box (SSB)
seRies-A / OveRview OF FUnCtiOns / ACCessORies
Analog wireless transmissionspeed
Current speed
Trip distance
Total distance
Ride time
Average KMH
Comparison KMH / to average
Features
General – A4 / A8 / A4+ / A8+
Wired models – A4 / A8
BAT 3 VRef. No. 1013
Battery 3 V, type 2032Package contents: battery 3 V
CMAG S / M Ref. No. 4410
Clip Magnet S / M for round spokes up to 2.3 mm or flat spokes up to 3.4 mmPackage contents: clip magnet
CMAG L / XL Ref. No. 4412
Clip Magnet L / XL for round spokes up to 3.2 mm or flat spokes up to 5.4 mm Package contents: clip magnet
UMW 75Ref. No. 5502
Universal bracket for handlebars and stemCable length: 0,75 mPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad, cable ties
UMW 150Ref. No. 5504
Universal bracket for handlebars and stemCable length: 1,5 mPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad, cable ties
UMW KITRef. No. 5505
Assembly kit cable, including magnetPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad,1 clip magnet, cable ties
Accessories
up to 5 hup to 5 h
* After 5 hours, the receiver is switched off. The receiver can be switched on again by pressing a button.
Wireless models – A4+ / A8+
UMWLRef. No. 5503
Universal bracket for handlebars and stemWirelessPackage contents: 1 universal bracket, cable ties
UMWL KIT ARef. No. 5506
Assembly kit wireless Series-A,including magnetPackage contents: 1 universal bracket,1 analog transmitter including battery 12 V1 rubber pad,1 clip magnet, cable ties
AWTMRef. No. 5501
Series-A analog transmitter for speedPackage contents: 1 transmitter analog, 1 rubber pad, cable ties
BAT 12 VRef. No. 1014
Battery 12 V, type A 23 / LR 23 / 23 AEPackage contents: battery 12 V
VDO CYCLECOMPUTING – seRies-A – OveRview OF FUnCtiOns / ACCessORies
VDO_Haendlerkatalog_2011_12_GB.indd 15 17.08.11 13:50
16
X1 X2 X2DW
X3DW
X1DW
the sportive
the seRies-X
A little more of everything! More display, more features, more technology, more digital transmission. That’s what the Series-X offers to the sportively ambitious biker.
The features:
Full text menu display EMC menu operation Time permanently displayed Digital wireless transmission for speed
and cadence Cadence optional on all wireless models Automatic bike recognition bike 1 / bike 2
in the wireless models Can be used for 2 bikes Permanent data storage during battery replacement
(except X1 and X1DW) Wheel size setting either in milimeter or inch
(wheel size) or via tyre size table (stored in computer) Smart Set Box SSB for quick basic settings at the
dealer's, including test function
seRies-X
VDO CYCLECOMPUTING – seRies-X
Downhill
Freeride
X-Country
Marathon
Road Bike
Track Cycling
Touren / Trekking
City
Commuting
Recommended use
VDO_Haendlerkatalog_2011_12_GB.indd 16 17.08.11 13:50
R 1 R 1 R 2 R 2 R 3 R 3
Ø 45 mm
20 x 1,75
24 x 1 3/8
30 – 622
37 – 622
***
VDO CYCLECOMPUTING – seRies-X 17
MAGNET
STOP STOP
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
LAPS MANUAL STOP
LAPS AUTOMATIC STOP
START
0 KM
Training goal
To cover 10 kilometers in 15 minutes
3.5 KM
Forecast 1
17 minutes for 10 kilometers
6,5 KM
Forecast 2
13 minutes for 10 kilometers
FINISH
10 KM
Ride time
14.5 minutes for 10 kilometers
Time trial timer
Lap timer
Large display
The display of the Series-X is extra large. The figures
for speed and additional data could thus be enlarged.
The text in the display is more readable. The time is
permanently shown on the display. In the wireless
models, the current cadence (optional) is permanently
displayed. Thus we have all the important information
at a glance.
Variable service intervals
Individual service intervals can be set
for two bikes.
After reaching the set mileage* the
display will prompt for the service
of the bike**.
This feature can be turned off.
Wheel size setting via tyre table
With the Series-X, the wheel size can
optionally be selected using a tyre
table or, as before, be set in millimeters
or inch. Thus the wheel size setting is
even more convenient.
Easy menu control
The EMC control system easily and intuitively allows the
operation while riding, and the setting of the computer for
the first time. All settings are accessible in a common menu.
New stopwatch functions
Digital wireless transmission
CODED DATA TRANSMISSION
SAVING AND CODING OF
DATA
INTEGRATEDRECEIVER
SPEED TRANSMITTER
CADENCE TRANS-MITTER
NO FAILURE POSSIBLE
NO FAILURE POSSIBLE
DW stands for “Digital Wireless” and “Double Wireless”
Ø 45 mm
C = CLEAR
DOWN
M = MENU
UP
FUNCTION 2
FUNCTION 1
seRies-X
VDO_Haendlerkatalog_2011_12_GB.indd 17 17.08.11 13:50
YEAR
WARRANTY
* *
03/10
18
07-08/10 YEAR
WARRANTY
DATA SAFEDATA SAFE
X2 Cycling functionsB Current speedB Trip distanceB Total distance bike 1 / bike 2 / combinedB Ride timeB Total ride time bike 1 / bike 2 / combinedB Average speedB Maximum speedB StopwatchB Navigator (2nd programmable trip distance counter, counting forward or backward)B Clock
Further featuresB EMC menu operation systemB FULL TEXT in 7 languages DE, GB, FR, IT, ES, NL, PLB Sleep mode (display shut-off)B Stopwatch indicator shows running stopwatchB Variable service intervals for BIKE 1 and BIKE 2 B Wheel sizes adjustable via tyre table or manually in mm or inchB Data storage during battery replacement
Can be used for 2 bikes
For dealersB Adjustable via Smart Set Box SSB
* X2DW All functions as on X2, plus:
Wireless transmission
Digital, coded wireless transmission DW: Digital Wireless / Double Wireless for speed and cadence (optional)B Automatic pairingB Automatic bike recognition bike 1 / bike 2
X1 Cycling functionsB Current speedB Trip distanceB Total distance bike 1 / bike 2 / combinedB Ride timeB Average speedB Maximum speedB Clock
Further featuresB EMC menu operation systemB FULL TEXT in 7 languages DE, GB, FR, IT, ES, NL, PLB Sleep mode (display shut-off)B Variable service intervals for BIKE 1 and BIKE 2B Wheel sizes adjustable via tyre table or manually in mm or inch
Can be used for 2 bikes
For dealersB Adjustable via Smart Set Box SSB
* X1DW All features as on X1, plus:
Wireless transmission
Digital, coded wireless transmission DW: Digital Wireless / Double Wireless for speed and cadence (optional) B Automatic pairingB Automatic bike recognition bike 1 / bike 2
X1DW CAD KIT Complete package with cadence kit
All functions as on X1DW
Additional package contents:B cadence transmitterB cadence magnetB mounting material
seRies-X / X1 / X1Dw / X2 / X2Dw
the digital wireless entry-level mode
the intelligent tourer
X1Ref. No. 7101
X2Ref. No. 7102
X2DWRef. No. 7112
X1DW CAD KITRef. No. 7114
X1DWRef. No. 7111
VDO CYCLECOMPUTING – seRies-X – X1 / X1Dw / X2 / X2Dw
VDO_Haendlerkatalog_2011_12_GB.indd 18 17.08.11 13:50
19
YEAR
WARRANTY
DATA SAFEDATA SAFE
seRies-X / X3Dw / X3Dw CAD Kit
X3DW Cycling functionsB Current speedB Trip distanceB Total distance bike 1 / bike 2 / combinedB Ride timeB Total ride time bike 1 / bike 2 / combinedB Average speedB Maximum speedB StopwatchB Timer 1, Timer 2B Timer 1+2 with up to 99 repetitionsB Countdown timerB Time trial timer with adjustable distanceB Lap timer for 30 laps, time, distance, lap average, automatic or manual start of the lapB Navigator (second programmable trip distance counter, counting forward or backward)B Alarm, adjustable alarm or reminder alarmB Clock
Wireless transmission
Digital, coded wireless transmission DW: Digital Wireless / Double Wireless for speed and cadence (optional)B Automatic pairingB Automatic bike recognition bike 1 / bike 2
Further featuresB EMC menu operation systemB FULL TEXT in 7 languages DE, GB, FR, IT, ES, NL, PLB Sleep mode (display shut-off)B Stopwatch indicator shows running timerB Beeper for timer and alarm clockB Variable service intervals for BIKE 1 and BIKE 2 B Wheel sizes adjustable via tyre table or manually in mm or inchB Data storage during battery replacement
Can be used for 2 bikes
For dealersB Adjustable via Smart Set Box SSB
X3DW CAD KIT Complete package with cadence kit
All functions as on X3DW
Additional package contents:B cadence transmitterB cadence magnetB mounting material
the super sports computer
the super athlete with cadence kit
X3DWRef. No. 7113
X3DW CAD KITRef. No. 7114
VDO CYCLECOMPUTING – seRies-X – X3Dw / X3Dw CAD-Kit
VDO_Haendlerkatalog_2011_12_GB.indd 19 17.08.11 13:50
20
X1 X2 X2DW
X1DW
X3DW
X1 X 2 X1DW
X2DW
X3DW
VDO CYCLECOMPUTING – seRies-X – OveRview OF FUnCtiOns
Clock
Alarm
Current cadence*
Average cadence*
Maximum cadence*
* Only if cadence has been installed
FURTHER FEATURES
EMC menu operation system
FULL TEXT in 7 languages DE / GB / FR / IT / ES / NL / PL
Variable service intervals for bike 1 and bike 2
Sleep mode
Can be used for 2 bikes
Wheel sizes adjustable via tyre table or manually in mm or inch
Data storage during battery replacement
For dealers: Basic settings and function test via Smart Set Box SSB
seRies-X / OveRview OF FUnCtiOns
WIRELESS FUNCTIONS
Digital wireless transmission speed
Digital wireless transmission cadence (optional)
Automatic pairing
Automatic bike recognition bike 1 / bike 2
CYCLING FUNCTIONS
Current speed
Trip distance
Ride time
Total ride time bike 1
Total ride time bike 2
Total combined ride time
Average
Comparison of average with current speed
Max. speed
Stopwatch
Timer 1
Timer 2
Timer 1+2
Countdown
Time trial timer
Lap timer (30 laps)
Navigator (2nd trip distance counter, adjustable)
Total distance combined
Total distance bike 1
Total distance bike 2
VDO_Haendlerkatalog_2011_12_GB.indd 20 17.08.11 13:50
21
X TRANSMITTERRef. No. 7701
Transmitter for Series-X, Digital speed transmitter, including battery 3 VPackage contents: 1 transmitter digital, 1 battery 3 V, cable ties
UMWL KIT XRef. No. 7703
Assembly - Kit Wireless Series-X, including magnetPackage contents: 1 universal bracket,1 X transmitter including battery 3 V,1 clip magnet, cable ties
X CAD KITRef. No. 7702
X - CAD - KIT for Series-X, Digital wireless cadence extension including transmitter, cadence magnet and battery 3 VPackage contents: 1 cadence transmitter, 1 battery 3 V, 1 cadence magnet, cable ties
CAD MAGRef. No. 4411
Cadence magnet for mounting on the crank, for Series-X DWPackage contents: cadence magnet, cable ties
UMWLRef. No. 5503
Universal bracket for handlebars and stem WirelessPackage contents: 1 universal bracket, cable ties
BAT 3 VRef. No. 1013
Battery 3 V, type 2032 Package contents: battery 3 V
CMAG S / M Ref. No. 4410
Clip Magnet S / M for round spokes up to 2.3 mm or flat spokes up to 3.4 mm Package contents: clip magnet
CMAG L / XL Ref. No. 4412
Clip Magnet L / XL for round spokes up to 3,2 mm or flat spokes up to 5.4 mm Package contents: clip magnet
UMW 75Ref. No. 5502
Universal bracket for handlebars and stemCable length: 0,75 mPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad, cable ties
UMW 150Ref. No. 5504
Universal bracket for handlebars and stemCable length: 1,5 mPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad, cable ties
UMW KITRef. No. 5505
Assembly kit cable, including magnetPackage contents: 1 universal bracket with cable and sensor, 1 rubber pad,1 clip magnet, cable ties
VDO CYCLECOMPUTING – seRies-X – ACCessORies
seRies-X / ACCessORies
General – X1 / X1DW / X2 / X2DW / X3DW / CAD-KIT Wireless models – X1DW / X2DW / X3DW / CAD KIT
Wired models – X1 / X2
VDO_Haendlerkatalog_2011_12_GB.indd 21 17.08.11 13:50
22
Z3 Z3PC-LINK
Z2 Z2PC-LINK
trust is good ... controlled performance is better
the seRies-Z
With the Series-Z, we bring computer models with heart rate monitoring, altimeter, cadence and PC analysis. The Series-Z is for the ambitious cyclist who wants to control his performances and also document and analyze them with the PC-Link models. All models of the Series-Z have a 3-channel 2.4 GHz digital wireless technology for speed, heart rate and cadence. For wireless protocol, we rely on the proven ANT+* protocol. Thus, the Series-Z models are compatible with products of other providers, which also use the ANT+ protocol. Innovative and high class design make the new Series-Z models absolute eye-catchers. In addition to the measurement functions for bike, heart rate, cadence and altitude, the Series-Z models offer performance measurement in WATTS and determine the calories burnt. The extensive computer analysis program provides a detailed tours analysis and allows an individual training plan.
seRies-Z
Downhill
Freeride
X-Country
Marathon
Road Bike
Track Cycling
Touren / Trekking
City
Commuting
Recommended use
VDO CYCLECOMPUTING – seRies-Z
VDO_Haendlerkatalog_2011_12_GB.indd 22 17.08.11 13:50
23
trust is good ... controlled performance is better
Operating concept
Clear allocation of functions to specific buttons Button A: Altitude functions Button P: Heart rate functions and timer Button 1: Bike functions of the current trip Button 2: Bike functions, total data of all trips Button STW: Start / Stop of the selected timer Buttons with clearly defined pressure point, to use with gloves Menu-controlled EMC system in the setting mode Feedback from the system when setting is completed
Altimeter functions
Current altitude Current gradient uphill / downhill Current temperature Day’s altitude difference
uphill / downhill Daily distance uphill/downhill Annual altitude difference
uphill / downhill Highest point day / year value Average gradient uphill / downhill Max. gradient uphill / downhill
Cycling functions
Current speed Trip distance Ride time Average Maximum Cadence Average cadence Maximum cadence
*varies according to model
Heart rate functions
Current heart rate Timer (6 timers selectable) Average heart rate Max. heart rate Heart rate in % of HR max. Times in, above, below the limit Calories burnt Watt output Recovery heart rate / Recovery time
Start/Stop
of all timer functions
Total values
Clock Navigator (2nd trip distance counter) Total distance bike 1 Total distance bike 2 Total distance bike 1+2 Trip time bike 1 Trip time bike 2 Total trip time bike 1+2
All information quickly at hand
Permanent* in the display
Speed Heart rate Altitude Temperature Gradient uphill/downhill in % Cadence Comparison of current/average
speed
seRies-Z
VDO CYCLECOMPUTING – seRies-Z
VDO_Haendlerkatalog_2011_12_GB.indd 23 17.08.11 13:50
24
seRies-Z
Hiking mode
All models can be switched from bicycle mode to walking mode. The Series-Z was indeed developed as a bike computer, but can also
be used for hiking, jogging, Nordic walking and other sports. The heart rate monitoring is completely available in the hiking mode. With the altitude measurement, the hiked uphill and downhill altitudes
are saved in the special hiking mode memory. So you know exactly what you've done on the bike or in Nordic walking.
For the hiking mode, the computer can be transformed into a sports watch with a close-fitting wrist strap.
From biking to hiking
Altitude measurement
Gain / loss in altitude Annual altitude gain / loss uphill and downhill
separate for bike 1 / bike 2 / hiking mode Annual altitude gain / loss can be set Distance cycled uphill and downhill Current altitude / gradient / temperature
permanently displayed Average / max. gradient uphill / downhill Simple starting altitude recalibration
(button short cut) Possible to adjust the current altitude
Heart rate display
3 training zones can be defined
Personal HR max automatically calculated on the basis of
personal data or individually customized
Training zones automatically calculated on the basis of
personal HR max or individually customized
Current heart rate is also displayed in % of HR max
(allows easy monitoring of the training setting)
Calorie consumption display
Both recovery heart rate and recovery time measurement operations
are optionally possible
Watt output, display of current power in watts
Display of training times in, under and above the set training zone
Acoustic warning when values are below or above the set
training zone limits (switch-off-able)
VDO CYCLECOMPUTING – seRies-Z
VDO_Haendlerkatalog_2011_12_GB.indd 24 17.08.11 13:51
25
STOP STOP
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
0100110100110101
00110100110101
10100110101
010011010
0100110
10011
01
010011010
0100110
10011
01
Watt display (virtual power)
In the models Z3 and Z3 PC-Link, the wattage can be calculated. For this, the cadence must be installed.
The calculation algorithm takes into account several adjustable influencing factors such as – Weight – Rolling resistance (via tyre type) – Aerodynamic drag (via sitting position)
Under the same conditions the watt display gives comparable watt values that can be used for an analysis of the training progress.
Cadence
All models can be retrofitted with cadence
Current CAD / Average CAD / Max. CAD
With CAD: Watt display possible in the models
Z3, Z3 PC-Link
Service interval display
Customizable service intervals,
separately for bike 1 / bike 2
Universal handlebar bracket
For handlebar or stem mounting, fast assembly with cable ties
Battery service life
With three-channel wireless reception, the battery
in the computer lasts for about 4000-6000 KM or
2400 to 3600 MI and the batteries in the transmitter,
between 8,000 and 12,000 KM or 4800 to 7200 MI
VDO CYCLECOMPUTING – seRies-Z
CODED DATA TRANSMISSION
SAVING AND CODING OF DATA
MAGNETIC IMPULSE
HEART RATE TRANSMITTER
MAGNET
seRies-Z
Wireless transmission
Fully digital 3-channel wireless transmission
for speed, heart rate and cadence
ANT+ wireless protocol: extremely fast and safe
wireless protocol
2.4 GHz wireless frequency: very interference-free
frequency
Compatible with other devices that also use the
ANT+ wireless protocol
Fixed pairing for 5 transmitters (bike 1 / bike 2 /
cadence 1 / cadence 2 / heart rate)
(Pairing will be retained until the next battery
change)
Data update after wireless interference,
up to 60 seconds
Long transmission range
INTEGRATED RECEIVER
NO FAILURE POSSIBLENO FAILURE
POSSIBLE
Cadence
ADjUSTABLECONDITIONS
ALGORITHM
CALCULATION
WATT output
CADENCE TRANSMITTER
SPEED TRANSMITTER
VDO_Haendlerkatalog_2011_12_GB.indd 25 17.08.11 13:51
26
*
YEAR
WARRANTY
seRies-Z / Z2 / Z2 pC-LinK
have your finger on the pulse
The Z2 offers bike and heart rate functions.
The Z2 is designed for all ambitious cyclists
who want to monitor and document their
performance without altitude measurement.
Cycling functionsB Current / average / Max KMH/MPHB Trip time / Total ride time combined bike 1 / 2 / 1+2B Trip distance / Total distance combined bike 1 / 2 / 1+2B 2nd trip distance, programmableB Cadence current / average / Max (optional)
Heart rate functionsB Current / average / maximum heart rateB Heart rate in % of personal max. heart rateB 3 training zones can be setB Training times in, above, below the set limitB 6 different training timers selectableB LAP timer for 50 lapsB Calories burntB Recovery heart rate (time or target heart rate)
Further features
3-channel digital wireless transmission for speed, heart rate and cadenceB Up to 5 functions simultaneously in the displayB Select from 7 languagesB Sleep modeB Clock / AlarmB Service interval display (programmable)B For use on two bikesB Hiking mode selectableB Can be worn as sports watch with wrist strap.
* Z2 PC-Link
All functions as on Z2, plus:
B Data storage for up to 100 hours of riding timeB 2 recording intervals selectable 10 sec / 20 secB Comprehensive data analysis software for PCB Docking station for PC download
VDO CYCLECOMPUTING – seRies-Z – Z2 / Z2 pC-LinK
Z2 PC-LINKRef. No. 6010 Z2 PC
Z2Ref. No. 6005 Z2
VDO_Haendlerkatalog_2011_12_GB.indd 26 17.08.11 13:51
27
**
YEAR
WARRANTY
03/09
seRies-Z / Z3 / Z3 pC-LinK
Control is better
The Z3 offers bike, heart rate and
altimeter functions. The wattage
measurement is also available
with optional cadence.
Cycling functionsB Current / average / Max KMH / MPHB Trip time / Total ride time combined bike 1 / 2 / 1+2B Trip distance / Total distance combined bike 1 / 2 / 1+2B 2nd trip distance, programmableB Cadence current / average / Max (optional)
Heart rate functionsB Current / average / maximum heart rateB Heart rate in % of personal max. heart rateB 3 training zones can be setB Training times in, above, below the set limitB 6 different training timers selectableB LAP timer for 50 lapsB Calories burntB Recovery heart rate measurement (time or target heart rate)B WATT-performance measurement
Altimeter functionsB Current altitude / gradient / TemperatureB Altitude difference uphill / downhillB Distance uphill / downhillB Average / Max. gradient uphill / downhillB Highest altitude current / all toursB Annual altitude difference uphill / downhillB Altitude measurement also in the hiking mode
Further features
3-channel digital wireless transmission for speed, heart rate and cadenceB Up to 7 functions simultaneously in the displayB Select from 7 languagesB Sleep modeB Clock / AlarmB Service interval display (programmable)B For use on two bikesB Hiking mode selectableB Can be worn as sports watch with wrist strap.
** Z3 PC-Link
All functions as on Z3, plus:
B Data storage for up to 100 hours of riding timeB 3 selectable recording intervals 5 sec, 10 sec, 20 secB Comprehensive data analysis software for PCB Docking station for PC download
VDO CYCLECOMPUTING – seRies-Z – Z3 / Z3 pC-LinK
Z3 PC-LINKRef. No. 6020 Z3 PC
Z3Ref. No. 6015 Z3
VDO_Haendlerkatalog_2011_12_GB.indd 27 17.08.11 13:51
Z3
28
Z2 Z3Z2PC-LINK
Z3PC-LINK
Z2 Z2PC-LINK
Z3PC-LINK
3 3 3 3
VDO CYCLECOMPUTING – seRies-Z – OveRview OF FUnCtiOns
seRies-Z / OveRview OF FUnCtiOns
Time below training zone
Time above training zone
Recovery heart rate
Recovery time
Calories burnt
Display of the upper / lower limit
Adjustable training zones
Optical signal for heart rate transmission
Acoustic signal for above / below set values
ALTIMETER FUNCTIONS
Current altitude
Current gradient
Current temperature
Day's gain uphill
Daily distance uphill
Maximum day's altitude
Average ascending gradient
Max. ascending gradient
Annual altitude gain 1 / 2
Max. annual altitude 1 / 2
Day's loss downhill
Daily distance downhill
Average descending gradient
Max. descending gradient
Annual downhill difference bike 1 / 2
Adjustable home altitude
Recalibration of home altitude
Hiking mode / jogging mode
FURTHER FEATURES
Full text in 7 languages
Service interval display
Stopwatch indicator
Sleep mode
Total distance adjustable
PC analysis
Recording interval Z2 PC-Link: 10 / 20 sec. Z3 PC-Link: 5 / 10 / 20 sec.
Digital wireless transmission speed
Digital wireless transmission heart rate
Digital cadence optional
CYCLING FUNCTIONS
Current speed
Trip distance
Total distance combined
Total distance bike 1
Total distance bike 2
Ride time
Total ride time bike 1
Total ride time bike 2
Total ride time combined
Average KMH / MPH
Comparison actual to average speed
Max. speed
Second trip distance counter
Clock
Stopwatch
Countdown with beeper
Timer 1, Timer 2, Timer 1+2 with beeper
Lap timer (50 Laps)
2 wheel sizes
Automatic Start / Stop
HEART RATE FUNCTIONS
Current heart rate
Average heart rate
Maximum heart rate
Curent heart rate in percentage of max. HR
WATT output
Time in training zone
VDO_Haendlerkatalog_2011_12_GB.indd 28 17.08.11 13:51
29
seRies-Z / ACCessORies
ELASTIC Z Ref. No. 6606
Elastic strap for heart rate transmitter Series-ZPackage contents: 1 elastic strap
COMFORT GEARRef. No. 6610
Soft Belt heart rate transmitter Package contents:1 heart rate transmitter including battery1 textile fabric belt, conductive
Z WRIST Ref. No. 6607-S (black) Ref. No. 6607-B (brown)
Wrist strap “black” Package contents: 1 wrist strap black
Wrist strap “brown” Package contents: 1 wrist strap brown
Z WRIST LOCK Ref. No. 6608-S (black)Ref. No. 6608-B (brown)
Lid fastener for wrist strap “black”Package contents: 1 1 lid fastener black
Lid fastener for wrist strap “brown”Package contents: 1 1 lid fastener brown
DOCKRef. No. 6609
Docking Station Series Z for transferring data to the PCPackage contents: 1 docking station including USB cable
BAT 3 VRef. No. 1013
Battery 3 V, type 2032Package contents: battery 3 V
CMAG S / M Ref. No. 4410
Clip Magnet S / M for round spokes up to 2.3 mm or flat spokes up to 3.4 mmPackage contents: clip magnet
CMAG L / XL Ref. No. 4412
Clip Magnet L / XL for round spokes up to 3.2 mm or flat spokes up to 5.4 mm Package contents: clip magnet
UMWLRef. No. 5503
Universal bracket for handlebars and stemwirelessPackage contents: 1 universal bracket, cable ties
UMWL-KIT ZRef. No. 6601
Assembly Kit Wireless Series-Z including magnetPackage contents: 1 universal bracket,1 Z transmitter including battery 3 V,1 clip magnet, cable ties
Z TRANSMITTERRef. No. 6602
Transmitter for Series-Z, Digital speed transmitter, including battery 3 VPackage contents: 1 transmitter digital, 1 battery 3 V, cable ties
Z CAD KITRef. No. 6603
Z CAD KIT for Series-Z, Digital wireless cadence extension including transmitter, cadence magnet and battery 3 VPackage contents: 1 cadence transmitter, 1 battery 3 V, 1 cadence magnet, cable ties
CAD MAGRef. No. 4411
Cadence magnet for mounting on the crank, for Series-ZPackage contents: cadence magnet, cable ties
HEART RATE Z Ref. No. 6604
Series-Z, heart rate digital transmitterPackage contents: 1 heart rate digital transmitter, including battery
HEART RATE KIT ZRef. No. 6605
Series-Z, heart rate transmitter and elastic strap, including batteryPackage contents: 1 heart rate transmitter including battery, 1 elastic strap
VDO CYCLECOMPUTING – seRies-Z – ACCessORies
ONLY
Z2/Z2 PC-Link,
Z3/Z3 PC-Link!
ONLY
Z2/Z2 PC-Link,
Z3/Z3 PC-Link!
ONLY
PC-Link models
ONLY Z2/
Z2 PC-Link,
Z3/Z3 PC-Link!
ONLY Z1!
ONLY Z1!
ONLY Z2/Z2 PC-Link,
Z3/Z3 PC-Link!
ONLY
Z2/Z2 PC-Link,
Z3/Z3 PC-Link!
ONLY
Z2/Z2 PC-Link,
Z3/Z3 PC-Link!
VDO_Haendlerkatalog_2011_12_GB.indd 29 17.08.11 13:51
30 VDO CYCLECOMPUTING – pC-spORt AnALysis sOFtwARe
pC-spORt AnALysis sOFtwARe
PC-Sport analysis software for Series-Z
Suitable for Windows XP, Vista, Windows 7
Drivers for the USB docking station on the installation CD
Software updates available at www.vdocyclecomputing.com
On MAC OS install-able under Parallels or VM Ware Fusion
Set up any number of users (e.g. biking club) Every single recorded dataset is individually editable
(e.g. add comments)
Graphical representation of data (time axis or distance axis) Selection of data that should be displayed in the graphic Graphic display can be freely configured Zoom function in graphic display enables detailed analysis
Individual datasets, individually editable
Summary of trip
VDO_Haendlerkatalog_2011_12_GB.indd 30 17.08.11 13:51
31
pC-spORt AnALysis sOFtwARe
VDO CYCLECOMPUTING – pC-spORt AnALysis sOFtwARe
A data editor can be displayed for graphics. The data editor displays the exact data at any selected
point on the graph.
Easy switch from graph to dataset table
Tabular or graphical comparison of 2 training sessions Several training sessions (e.g. morning/afternoon)
can be merged into a single session For different sports (e.g. triathlon) training blocks
(cycling, running, swimming) can be defined A section manager enables the management of training
sections
Analysis according to training sections possible Equipment manager for managing the bikes used for
training
Possible training analyses: – Period analysis, strain analysis, stress-styles analysis
– Training planning / comparison of plan with actual Graphical illustration of the tripFreely selectable graph data
Graphics with zoom window
Calendar view of the training sessions
Stress statistics about a training period
The models Z2 PC-Link and Z3 PC-Link are supplied with the analysis software PC-Sport.
VDO_Haendlerkatalog_2011_12_GB.indd 31 17.08.11 13:51
VDO CYCLECOMPUTING – pOs32
pOs
PREMIUM DEALER
DEMOBOX Series-XRef. No: 7905
The cheapest seller you can engage in the shop.
The Series-X Demobox actively supports your sales.
All functions of the Series-X can be tested on the Demobox.
Equipped with the models:
X1, X2, X3DW-DEMO (X3DW wired version for Demobox)
STICKER Ref. No.: PREMIUM - STICKER
Premium Dealer Sticker
Show to your customers: We have VDO expertise.
point-of-sale material support
VDO CYCLECOMPUTING – pOs
VDO_Haendlerkatalog_2011_12_GB.indd 32 17.08.11 13:51
33
the vDO smart set box ssb
SMART SET BOX SSBRef. No. 7901
With the SSB, all models of the Series-X and Series-A and MC 2.0
can be B set: Language, time, wheel size, total distance, service intervalB reset: Trip distance, ride time and total distanceB tested: Speed, cadence, transmitter test
Suitable for the models:
X1 A4 (2010) MC 2.0 WL
X2 A8 (2010) MC 2.0 WR
X1DW A4+ (2010)
X2DW A8+ (2010)
X3DW
A product with a high standard of quality and technology also
has an appropriate service. Our service center wants to make
your job as easy as possible.
VDO service support
With the VDO service support, the complaint processing
between you and VDO is simplified and accelerated.
1. In case of a complaint, just call us.
2. We decide whether a claim exists over the telephone.
3. If a claim exists, we confirm to you over the phone.
4. You can make immediate replacement for your customer.
5. We immediately send replacement to you, or alternatively directly to your customer.
6. You can send us the already replaced complaints together every quarter. This saves time and money.
That's service, as we understand it. Thus you demonstrate your
competence and win the trust of your customers in the long
term.
Telephone Hotline
Once you have technical questions or need our assistance in
assessing the complaint: Just call us. We are always available
with advice and practical help.
Service Hotline +49 (0) 6321 - 95 82 7 - 10
+49 (0) 6321 - 95 82 7 - 18
Only English. Hotline open from 10:00 to 12:00 (German Time)
The VDO Smart Set Box
Our Smart Set Box SSB helps you to process complaints reliably.B Does the computer function?B Does the wireless transmission function?
These questions will be answered reliably by the Smart Set Box.
the vDO service support
seRviCe sUppORt / sMARt set bOX ssb
VDO CYCLECOMPUTING – seRviCe-sUppORt / sMARt set bOX ssb
VDO_Haendlerkatalog_2011_12_GB.indd 33 17.08.11 13:51
34
Planned quality
For a new model series, we already think of the quality at the development stage. Quality criteria are identified for each component and quality tests defined for each phase of production. We have also provided our computers with an automatic test routine. Display, wireless transmission, transmitter pairing and data download are automatically tested. This facilitates the quality control during and after production. The proper wireless transmission of the wireless transmitter is already tested in the production stage with a specially developed test software.
Quality is the result of production
One must produce quality To do that, quality controls are carried out continuously during the entire production process. PCBs are measured, displays are reviewed and receiver chips have to demonstrate that they can receive data. Only then are all the parts assembled.
Complete final inspection
At the end of production a full function check is carried out for every computer by our inhouse quality inspection team. Wireless transmission, button function, software check, data download, rain test and climatic chamber are only some of the stations in the final inspection.
Function test before shipment
The computers are prepared for shipping only after they pass this final inspection. Before packing, an equipment check takes place once again on an automatic test station.
Pressure test
Cold chamber Abrasion test
Rain simulatorvDO quality management
qUALity MAnAGeMent
VDO CYCLECOMPUTING – qUALity MAnAGeMent
VDO_Haendlerkatalog_2011_12_GB.indd 34 17.08.11 13:51
35
Cycle Parts GmbH
Le Quartier Hornbach 13
D-67433 Neustadt / Weinstrasse
Headquarters
Your national distributor
Tel.: +49 (0) 63 21 - 95 82 7 - 0
Fax: +49 (0) 63 21 - 95 82 7 - 20
www.vdocyclecomputing.com
COntACt
VDO CYCLECOMPUTING – COntACt
Service Hotline:
+49 (0) 63 21- 95 82 7 - 10
+49 (0) 63 21- 95 82 7 - 18
Only English.Hotline open 10:00 to 12.00 (German Time)
VDO_Haendlerkatalog_2011_12_GB.indd 35 17.08.11 13:51
www.vdocyclecomputing.com
CP9018/1
VDO_Haendlerkatalog_2011_12_GB.indd 36 17.08.11 13:51
Top Related