Download - Buckingham Catalog

Buckingham Manufacturing Company, Inc. G

en

era

l Ca

talo

g

05/12

i

BuckinghamThe Occupational Safety and Health Administration (OSHA) has spelled out certain requirements for equipment used

in the construction (including power line construction) and telecommunications industries. These standards are under Title 29, CFR Chapter XVII, Parts 1910 and 1926 as detailed below.• Part 1910.67 (c) (2) (V) apply specifically to extensible and articulation boom platforms — belting requirements.• Part 1910.268 (g) (2) and (g) (3) applies specifically to telecommunications and personal climbing equipment for use

in that industry.• 1910.269 applies to electric power generation, transmission and distribution, electrical protection equipment.• Part 1926.104 (e) and (f ) applies to safety belts, lifelines and lanyards used primarily in the construction industry.• Part1926.453(b)(2)(v)applyspecificallytoaeriallift-beltingrequirements.• Part1926.502fallprotectionsystemcriteriaandpractices• Part1926.951b,ToolandProtectiveEquipment,dealwiththecareanduseofpersonalclimbingequipment.Other

requirements and/or standards may be issued.• Part1926.959appliesspecificallytolinemens’bodybelts,polestrapsandlanyards.(Otherthanintelecommunica-tionscoveredin1910.268).

TheAmericanNationalStandardsInstitute(ANSI)inZ359establishesrequirementsfortheperformance,design,marking,qualification,instruction,training,use,maintenanceandremovalfromserviceofconnectors,fullbodyharnesses,lanyards,energyabsorbers,anchorageconnectors,fallarresters,verticallifelines,andself-retractinglanyardscomprising personal fall arrestsystems.TheANSIZ359FallProtectionCodecurrentlyincludesninestandards:• Z359.0-2009“DefinitionsandNomenclatureUsedforFallProtectionandFallArrest”• Z359.1-2007“SafetyRequirementsforPersonalFallArrestSystems,SubsystemsandComponents"• Z359.2-2007“MinimumRequirementsforaComprehensiveManagedFallProtectionProgram"• Z359.3-2007“SafetyRequirementsforPositioningandTravelRestraintSystems”• Z359.4-2007“SafetyRequirementsforAssisted-RescueandSelf-RescueSystems,SubsystemsandComponents”• Z359.6-2009“SpecificationandDesignRequirementsforActiveFallProtectionSystems”• Z359.12-2009“ConnectingComponentsforPersonalFallArrestSystems”• Z359.13-2009“PersonalEnergyAbsorbersandEnergyAbsorbingLanyards”

TheAmericanSocietyforTestingandMaterials(ASTM)hasrevisedtheEdisonElectricalInstitute(EEI)“SpecificationsforLinemen’sClimbingEquipment”AP-21973.ThenewstandardisASTMF887,“StandardSpecificationsforPersonalClimbingEquipment.”

CSAInternationalisaproviderofthirdpartyproducttestingandcertificationservicesforcompliancetonationalandinternational standards. The CSA Certification mark, generally required by the Canadian market, indicates that a product hasbeenevaluatedbytheirprocess(examination,testingandfollow-upinspection)andcompliestotherequirementsofthe applicable standard for which the product is labeled. •CSA-Z259.1-05-Bodybeltsandsaddlesforworkpositioningandtravelrestraint•CSA-Z259.2.2-98(Reaffirmed2004)-Selfretractingdevicesforpersonalfall-arrestsystem•CSA-Z259.10-06-FullBodyHarness•CSA-Z259.11-05-EnergyAbsorbersandLanyards•CSA-Z259.12-01-ConnectingComponentsFor(PFAS)•CSA-Z259.14-01-FallRestrictEquipmentForWoodPoleClimbing.

Weguaranteetheequipmentwemanufacturetobefreefromdefectsinmaterialandworkmanship.Wewillrepairorreplaceanyequipmentdefectivewhichisreturnedtous.Thisexpressguaranteesupersedesallother expressed or implied guarantees, obligations or liabilities.

Ifyouhavequestionsaboutaproductoritsintendeduse,pleasecontactusbetween8:00a.m.and5:00p.m.,EasternTime,MondaythroughFriday,at(607)773-2400.

Buckingham and Safety StandardSOSha

cSa

Our guarantee

anSi Z359

aStm

iiPhone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

BuckinghamManufacturingCompanyhasproudlyservedindustrieswithworkers who climb wood poles, trees, towers and structures that support electricityandtelecommunicationsequipmentforwellover100years.Whetherforworkaboveorbelowgroundintheseindustries,weproducesafetyequipmentandspecialtytoolsforworkpositioning,retrieval,fallrestraint,fallrestriction,fallarrestandsuspensionworkapplications.Mostpeople do not think about the importance of work performed by linemen everydayuntilthepowergoesout,thetelephone/computerstopswork-ing or a tree falls on a house or power line. Our customers maintain and restoreservicesinalltypesofweather.Thiscatalogisatributetothesehighly trained workers performing dangerous jobs with little recognition!

FallArrestSystem:A product specifically designed to arrest a fall from anelevatedposition.

SuspensionSystem:Equipmentdesignedtosuspend or lower a person to a work site. Not intended to arrest a fall.

WorkPositioningSystem&WoodPole Fall Restriction Device

FallRestraintSystem:Equipmentdesigned&usedtopreventtheworkerfromreach-ing an area where a free fall could occur.

RetrievalSystem:Equipmentusedtoevacuateaperson from an area in an upright position. Not intended to arrest a fall unless also equipped for fall arrest.

• AmericanSocietyforTestingandMaterials(ASTM)• AmericanSocietyofSafetyEngineers(ASSE)• GreaterBinghamtonChamberofCommerce• InternationalSafetyEquipmentAssociation(ISEA)• InternationalSocietyofArborculture(ISA)

• NationalAssociationofManufacturers(NAM)• NationalAssociationofTowerErectors(NATE)• NortheastPublicPowerAssociation• TreeCareIndustryAssociation(TCIA)• UnitedWay

Membership in Professional Trade Associations & Community Involvement

Buck tough

Buck tested

Product application

Knowingthedangersoftheseindustries,wemakeourproductsBuckTough.Theyaredesignedforroughuseandnoproductismadewithoutthoroughtestingandinspection.Thisincludestherawmaterials,in-processmanufacturingand the finished product.

Whenmultiplestandardscanbeappliedtoaproduct,Buckinghamusesthetougheststandardforcompliance.AndtomakesureweareuptodateonstandardswearemembersofANSI,ASTMandCSA.

Buckinghamiscommittedtodevelopnewproductsforourcustomersthataretopqualityandsafe.Wewillcontinuetolistentoourcustomerstoimproveexistingproductsanddevelopnew.OurproductswillbeproducedwiththeutmostattentiontoqualityandsafetyprovidingourcustomersassuranceofbeingBuckToughandBuckTested.

To help you use this catalog, most products are accompanied by a symbol that indicates whether the productisintendedforfallarrest,workpositioning,suspension,retrieval,orfallrestraint.

Buckingham Manufacturing

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.comiii

taBle Of cOntentSSafety Standards .............................................................................................................................................................................................. iYour Partner in Safety .................................................................................................................................................................................... ii

new Products 1climbers 9

Climber Information & Options ............................................................................................................................................. 10Pole Climbers ............................................................................................................................................................................... 12Tree Climbers ............................................................................................................................................................................... 14ReplaceableGaffs ...................................................................................................................................................................... 15ClimberGuide.............................................................................................................................................................................. 16

climber accessories 19Climber Pads ................................................................................................................................................................................ 20Climber Straps ............................................................................................................................................................................. 24Climber Accessories .................................................................................................................................................................. 25

Body Belts 27NewBodyBelts ........................................................................................................................................................................... 28Sizing Information ..................................................................................................................................................................... 29FullFloatBodyBelts .................................................................................................................................................................. 31SemiFloatBodyBelts ............................................................................................................................................................... 36 BodyBeltAccessories ............................................................................................................................................................... 37BodyBeltSafety .......................................................................................................................................................................... 39

Pouches & holsters 41Pouches & Holsters .................................................................................................................................................................... 42MiscellaneousHolsters ............................................................................................................................................................. 43LeatherNut&BoltBags ........................................................................................................................................................... 45CarryBelts ..................................................................................................................................................................................... 45

Positioning Straps & rescue Products 47BuckSqueezeWoodPoleFallRestraint............................................................................................................................... 48SuperSqueezeWoodPoleFallRestraint ............................................................................................................................ 49WoodPoleFallRestraintAccessories .................................................................................................................................. 50ConventionalPositioningStraps .......................................................................................................................................... 51Positioning Strap Safety ........................................................................................................................................................... 52

knives & tools 53Knives ............................................................................................................................................................................................. 54Thread Restorers ......................................................................................................................................................................... 55Scissors & Accessories ............................................................................................................................................................... 55Staple Sticks & Pullers ............................................................................................................................................................... 56Staple Puller ................................................................................................................................................................................. 56Strand&WireDispenser .......................................................................................................................................................... 56GoatWrench ................................................................................................................................................................................ 57WheelChocks .............................................................................................................................................................................. 57ManholeCoverHook ................................................................................................................................................................ 57GroundRodDriver ..................................................................................................................................................................... 57

guards & Scabbards 59

ivPhone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

canvas & fiberglass 63CanvasOptions ........................................................................................................................................................................... 64Aerial Accessories ....................................................................................................................................................................... 65Nut&BoltBags ........................................................................................................................................................................... 68ToolBags ....................................................................................................................................................................................... 70UtilityBags .................................................................................................................................................................................... 72NoseBags ...................................................................................................................................................................................... 73Buckets ........................................................................................................................................................................................... 75GloveBags .................................................................................................................................................................................... 77SleeveRollups.............................................................................................................................................................................. 78SpecialtyCanvasItems ............................................................................................................................................................. 79MeshBags ..................................................................................................................................................................................... 81HydraulicTool&BatteryStorageBags ............................................................................................................................... 82Fiberglass Accessories .............................................................................................................................................................. 83

fall Protection 87Harnesses ...................................................................................................................................................................................... 88 ErgovationHarnesses ............................................................................................................................................................... 93 HarnessMatrix ............................................................................................................................................................................. 94 Dual,SpecialtyandTieBackShockAbsorbingLanyards ............................................................................................. 97RopeandCableGrabs .............................................................................................................................................................. 99LanyardMatrix ...........................................................................................................................................................................101RetractableLanyards ..............................................................................................................................................................101PersonalFallLimiters .............................................................................................................................................................103Rope&CableGrabs .................................................................................................................................................................104VerticalLifeLinesandAnchorSlings ...............................................................................................................................104RetractableLifeline .................................................................................................................................................................105 Bosun'sChair ..............................................................................................................................................................................105 RiggingBlocks ...........................................................................................................................................................................105 Apprentice Fall Protection ....................................................................................................................................................106Rescue Systems .........................................................................................................................................................................107Buck-ItRestraintSystem ........................................................................................................................................................111ConfinedSpaceRetrieval ......................................................................................................................................................112Non-EntryManholeRescue ..................................................................................................................................................114LadderFallProtection .............................................................................................................................................................115

tower 117"ABC's"ofFallProtection .......................................................................................................................................................118DualLanyardSystem ..............................................................................................................................................................119BuckHookSystem ...................................................................................................................................................................120Step-SafeTM System ..................................................................................................................................................................121Anchorage ..................................................................................................................................................................................122Harness&BodyBeltCombinations ...................................................................................................................................123ConnectingDevices ................................................................................................................................................................126PersonalFallLimiters ..............................................................................................................................................................127Rescue Systems .........................................................................................................................................................................128HorizontalLifeline ....................................................................................................................................................................130RopeProDeluxeBags .....................................................................................................................................................................

Promotional Products 131index 135

Buckingham is pleased to introduce their newest products including the NEW SuperSqueeze which offers superb Wood Pole Fall Restriction and the Easiest, One Hand Adjustment on the market.

2Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

New

Prod

ucts

New Products

The SuperSqueeze offers superb Wood Pole Fall Restriction and offers the easiest adjustment on the market. With Buckingham's patent pending WebGrab the SuperSqueeze can be adjusted with just a flick of the wrist. The SuperSqueeze can be configured to fit many climbing styles and needs, and it's modular design makes it easy to change out worn or damaged components or straps in the field.

Model 488W2Q3 for Distribution

Model 488TW2Q3 for Transmission

Available with CarabinersModel 488W2 for Distribution

Model 488TW2 for Transmission Available with CarabinersModel 488R for Distribution

Model 488RT for Transmission

Model 488RQ4 for Distribution

Model 488RTQ4 for Transmission

2011 BuckSqueeze with WebGrabModel 482D - For distribution polesModel 482T - For transmission poles

Buckingham has yet again enhanced the BuckSqueeze by adding their WebGrab to the green strap for even easier adjustment. In production since 2000 the BuckSqueeze is the most widely used Wood Pole Fall Restriction Device in the U.S. With thousands in use and numerous documented saves, the BuckSqueeze provides Wood Pole Fall Protection during ascent and descent.

Model 48129W2YWeb SuperStrap• Features the patent pending WebGrab for easy adjustment.• Has all the benefits of web combined with the easy adjustment of rope.• Designed to use climbing over obstruction

Model 33709E - Neoprene SuperStrap• Features the patent pending WebGrab for easy adjustment.• No more holes to find or run out of as with conventional positioning straps• Made from 6 ply neoprene nylon with red warning core.• Available in any length with 2 snaps.• Order Model 337099E for a SuperStrap with linkless snap on WebGrab

Buckingham's SuperStraps have the same, easy to use adjustment as the popular BuckAdjuster.

Featuring the Patent Pending WebGrab for

the Easiest Adjustment for the Circumference

of the Pole

2011 Bucksqueeze

supersqueeze

superstrap

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com3

New Products

New Products

Over the years, Linemen have had to adapt to the equipment they used causing stress and strain on their bodies. Buckingham teamed up with Ergonomic Specialist to design a line of products specifically for Linemen and Arborist that fit human skeletal structure and make work more comfortable, safe and productive. The new Ergovation line from Buckingham makes hard work comfortable.

Model 4200 - ErgoBelt

Model 4201 - Deluxe LineBacker

Model 4202 - LineBacker

Model 6263 is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and standard tongue buckle.

Model 6264 is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and easy to use quick connect buckles.

The New LineBackers offer ergonomic advantages and turns a two dee belt into a four dee belt. Linebackers feature an abdominal stabilizer, dee ring distributing pads, and lumbar support (removable in Model 4201, permanent in Model 4202). The deluxe Model 4201 also feature harness attachment buckles to attach to a harness (to order attachable harness, add option '4C' to harness model number).

Features:A. Abdominal Stabilizer System - Elastic Abdominal Stabilizer belt maintains continual pressure and proper position of Lumbar Pad .B. Dee Ring Distributing Pads - Distributes pressure from the heel of dee by disbursing pressure over a greater area.C. Equalization Strap - When in work position transfers users weight from back support to seat section or seat section to back support.D. Lumbar Pocket - Removable lumbar pad for ideal back support.

A. B.

C.

D.

E.

F.

E. Harness Attachment Buckles - Attach harness to belt with man rated straps. Add option '4C to the harness model numberF. Removable Seat - Connects to upper belt using steel interlocking T buckles, BuckSqueeze can connect to the lower D rings for increased comfort, provides hip support for ultimate comfort and support, and seat D rings are adjustable for ideal placement and comfort of the individual while climbing.

Man rated Gut strap

LineBacker

Buck ergoBelt


New

Prod

ucts

New Products

Waist Belt / Harness Floating Restraint

Strap

Model 125R - Buck-It Restraint SystemBuckingham has developed a bucket restraint system to address the concern of the OSHA compliance officers allowing a person outfitted with a full body harness and 6 foot lanyard to fall from the basket and hit an object below.

System Concept:• A 10,000 lb. rated nylon strap attached, with a ratchet buckle and cotter pin that places the anchor point at the basket.• The strap has an 8" float with a 6" lanyard that attaches to the harness seat or waist belt to keep user from being catapulted.• This system allows users the mobility to do the work and avert the chance of falling.

Should the webbing around the basket be severed, the attachment back to the anchor is independent of the webbing around the basket.

Buck-it Restraint System attached to Harness

In addition, a shock absorber is attached to the Buck-it Restraint strap and the anchor point on the boom. This unique feature will keep the operator, the basket and the boom from hitting the ground in the event of a catastrophic separation of the bucket from the boom.

Extension Strap

Ratcheting Basket Strap

Ratchet Jacket

Wear Guard

Basket Restraint Deceleration Lanyard

Cotter Pin to prevent from coming loose

Model 125R2 - Mounting BracketFor Buckets with controls on the outside, the Buck-It Fiberglass Bracket keeps webbing against the basket to prevent user getting tangled in webbing while using the controls.

Before without Bracket

After with Bracket

Model 125R1 - Retro Harness StrapThe Retro Harness Strap adds onto a harness to connect the Buck-It Restraint System

Buck-It restraint system

Accessories


New Products

New Products

Model 3816 - Tower Rescue BlocksDesigned specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a life line. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.

Model 301SR - Self Rescue SystemThis New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape.Rated to 300 lbs.

Model 301SR-50 for 50'Model 301SR-75 for 75Model 301SR-100 for 100'Custom lengths available upon request.

Model 949C• Made from ballistic Nylon • 15 pockets • 2" Tunnel to pass belt through (Tools not Included)

Model 41333C7R5W3Camouflage Canvas Bag with Rubber bottom

CompaCt!

Ballistic tool Pouchcamo tool Bag

tower rescue Blocks

self rescue system

• Ideal for transporting equipment in rough terrain

• 6" diameter heavy duty rubber wheels

• Push button handle retracts when not in use


New

Prod

ucts

New Products

4371B14 - Rope Pail Haul BagThe Rope Pail constructed of 44oz. Vinyl was designed for the Arborist, Tower Worker, or Rope Access Technician, who has to haul their rope around and needs to pack it quick and convenient while keeping pace on the vertical job site. Features includes: • Measures 6" x 11" oval x 19"H• Fits 200' of 1/2" climbing line• Ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points• Metal buckles and snaps, that will far out last plastic components• 1 large grommet on underside used as a drain hole, or to run rope out of bottom of bag• MOLLE webbing exterior and interior of bag for organization and racking gear.

4370B14 - Gear Bucket Haul BagThe Buck Gear Bucket is constructed of 44oz. Vinyl with 4300 cubic inches of internal storage and is built to withstand the most abusive environments and treatment. Features include: • Measures 13"Dia x 27"H• An ergonomic back pad that easily removes for travel or storage• Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far outlast plastic components• 2 large grommets on underside used for drain holes, or to run rope out of bottom• MOLLE webbing on exterior and interior of bag for organizing and racking gear• Fits 200' of rope

Model 4374Large RopePro Deluxe Bag• Holds 250' of 1/2" rope or a saddle, helmet and 120' of rope• Measures: 16" Tall x 12" Wide

Model 4373 X-Large RopePro Deluxe Bag• Holds 500' of 1/2" rope or a saddle, helmet and 250' of rope• Measures: 24" Tall x 14" Wide

Buckingham announces the new Buck International line of rope bags featuring:• Water resistant fabric to help keep equipment dry•1 1/4" rope access port located in the lid with cap to keep dirt and water out• Zippered ventilation panels for air circulation and quick visual identification • Heavy duty lid zipper provides secure closure and maximum access to contents• Webbing gaps for tool holding clips and web loops for extra carabiners • Exterior pockets for additional storage • Attachment system for use with 4375 RopePro Deluxe Back Pack accessory

Model 4375 RopePro Deluxe Back Pack Attachment (sold separately)• Quickly converts a RopePro Deluxe bag to a backpack or climbing duffle• Padded for comfort and breathable materials for cool and dry operations• Carabiner storage loops in the shoulder straps• Adjustable chest strap• Reinforced edging and double stitching throughout

Haul Bags

ropePro deluxe Bags


New Products

New Products

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy.• Tangle free swivel top for added mobility.• 7' extension for expanded work area• Dyneema® polymer fiber 1" webbing - up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals.• A braking system designed for smooth consistent operation to prevent "jerky" lock-ups.• No factory recertification required.•Retractable unit (no hardware) only weighs 1.9lbs• Rated to 350 lbs.

Model 5V+T7A16X6 - Buck Stop LanyardThe Tie Back Buck Stop Lanyard features locking rope snap and a N 3618 tie back snap and 1" polyester web with a nylon tube.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009.

Model 6007-164DV+Z16' Lightweight Webbing Retractable Lifeline Features a light yet rugged composite housing. Housing swivels minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

Model 6008-74+Y+4+Z

Model 6008-74D+4+Z

Model 6008-74+YV+Z

Model 6008-74+Y+Y+Z

Dual BuckLimiterModel D6008Q1

Tie Back BuckLimiter

Model 6008-74+Y+TC+Z

Model NB9106A for use with all T, TB &

SB, CCA replaceable gaff pole climbers.

Model NB9206A for use with all T, TB & SB replaceable gaff pole

climbers.

Model NB9306 for use with all titanium and steel replaceable

gaff tree climbers.

Buckingham Replaceable Climbers are now even easier to replace! The Dowel and Screw Replaceable Climber Gaffs are available for any climber issued January 2011 or later.

N 3618 Tie back snap

Buck Limiter - Personal Fall Limiters

self retracting Lanyard tie Back Buckstop Lanyard

dowel & screw replaceable climbers


New

Prod

ucts

Notes:

Buckingham’s skilled craftsmen make the widest choice of climbers, including narrow climbers, to provide each user with proper fit and comfort. Linemen in Tanzania - Photo courtesy of Northwest Lineman College


Clim

bers

Inspect Your Climbers As Well As All Safety Equipment Before Each Use!

We at Buckingham are committed to making sure that our equipment can help you be safe at work. Our skilled craftsmen make the widest choice of climbers and options to provide each user with proper fit and comfort. All of our leg irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruction. Buckingham climbers are rated to 350 lbs. when the user is fully outfitted with tools and equipment.

All of Buckingham's leg irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruction. Buckingham climber leg irons are manufactured from selected high strength grades of steel and titanium. Gaffs are forged from a quality steel. Before, during and after manufacturing climbers from every production lot undergo rigorous testing. They are subjected to physical abuse far beyond that encountered in normal use.

• Leg irons are bent 180° around a two inch diameter mandrel to test for ductility.• Gaff tips are bent 3/4" beyond normal position.• Gaff security is checked then reexamined for loose gaffs.• Hardness of steel in both leg irons and gaffs are rechecked through Rockwell readings.• Gaffs are magnaflux inspected to ensure there are no flaws in the forging.• Upon completion, every climber is reviewed to insure the gaff angle, position and contour meet very tight tolerances.• Once the gaff has been final honed, it is inspected to make sure width, thickness, length, and radius meet the specified requirements.• Random sample climbers are fatigue cycle tested to simulate a lineman climbing a pole.• The deformation test is to aid in the elimination of climber fatigue in the event a climber is used in an unusual manner such as descending a pole with large steps.

If any of these conditions exist, discontinue use immediately.

Climbers and all safety equipment must be inspected before use. While inspecting climbers look for:• Visible Cracks - usually a fine jagged line• Cuts or marks in the steel - create stress risers causing the climber to

break at that point• Make sure loop on climber sleeve is secure• Make sure footstrap ring or loop is secured to climber stirrup• Use two fasteners to secure the sleeve to the climber• Inspect climber straps for cuts and excessive wear• Make sure the pad loops are secure and free of cuts and are not worn thin• Inspect climber stirrup to be sure it's not worn too thin

Model 6025Model 6025C for CCA GaffsCorrectly shaped gaffs are essential for climbing safety. Buckingham offers a Pole Gaff Maintenance Kit to safely and properly shape gaffs.Kit Includes:6058 - Smooth, single cut file6303 - Pole Gaff Gauge (6303C for CCA Gaff)6501 - Finishing Hone

This is what happened to a climber with a stress riser. Someone chiseled their initial 'L' into the climber shank. It eventually broke in the spot the shank was initialed.

Never chisel initials or marks into climbers!

Strength & Reliability

Climber Safety & Inspection

Gaff Maintenance

ClIMBER InfoRMAtIon


Climbers

Cleated Climbers

Model TB95089S

Tape Measuring

Model 6025

Proper fit is important to your comfort and safety. Correct climber length is normally measured from the boot sole under the instep to a point 1/2" below the bone projection just below the knee

joint. Standard sleeves are included unless long sleeves are requested by adding suffix 'L' to the product number. Long sleeves are generally preferred by people over 6'2".

Standard Stirrup Width Narrow Stirrup Width

Standard SleevesModel 9204

16 1/4" - 18 3/4"(40cm - 48cm)

14 1/2" - 17 1/4"(37cm - 42cm)

Long SleevesModel 9202

19 1/4" - 21 3/4"(48cm - 55cm)

17 1/4" - 20 1/4"(37cm - 51cm)

Climber Sleeve Leg Length Adjustment

Non Contoured Shank (Prefix T)

Contoured Shank (Prefix TB & SB)

Twisted Shank (Add Suffix 'T') Offset Stirrup Narrow Stirrup

Shank is straight from the top of the sleeve

to the base of the gaff.

Shank top is straight with an outward curve to accommodate the ankle

bone.

Shank follows the contour of the calf

muscle to help reduce chafing. Able to be

used with metal insert but not recommended.

Stirrup sits in the center of the foot.

Stirrup width of 4" opposed to the

standard 4 1/2".

No two people are alike, that is why Buckingham offers the widest choice of climbers and options to provide users with a customized, comfortable fit.

Cleated Climbers are also available. With 2 threaded replaceable cleat like logger spikes in the stirrup of the climber for traction climbing in wet and in damp conditions. Sold with 12 replacement cleats & wrench. To order, add an ‘S’ suffix to the climber number.

9202 Long Sleeve

9204 Standard Sleeve

Permanent Pole:• Standard 1 3/4” [4.5cm] • CCA 1 3/4” [4.5cm] Dowel & Screw Style Replaceable Pole: • Standard 1 3/4” [4.5cm]• CCA 1 3/4” [4.5cm] Pin Style Replaceable Pole: • Standard 1 3/4” [4.4cm] • CCA 1 11/16” [4.3cm]

Permanent Tree:• Tree 3 1/4” [8.25cm]Screw Style Replaceable Pole: • Standard 1 3/4” [4.4cm] • CCA 1 5/8” [4.1cm]Replaceable Tree: • Tree 2 ¾” [7cm]

See pg. 15 for Replaceable Gaff Details.

Climber Iron options

Gaff options

Proper fit & Comfort

ClIMBER oPtIonS & SIzInG


Clim

bers •Gold colored with chrome colored gaffs & sleeves. •Contoured shank for ankle relief and

comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 16° angle. •Climber with gaff weighs 1 lb. 2 oz.

Model # Style CCA Foot StrapsModel 21391

Leg StrapsModel 2239

Climber PadsModel 3122

TB94089A Offset X - -TB91089A Offset X X - -TB94059A Offset X X XTB91059A Offset X X X X

For climbers with a narrow stirrup order TB96089A

•Chrome colored with a black sleeves. •Non contoured shank and beveled stirrup. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaff with 16° angle. •Climber with

gaff weighs 1 lb. 2 oz.




T94089A Offset X - -T91089A Offset X X - -T94059A Offset X X XT91059A Offset X X X X

•Silver colored with black sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Permanent gaff with 12° Angle. •Climber with gaff weighs 1 lb. 1 oz.




TB98479 Offset X - -TB91079 Offset X X - -TB87479 Offset X X XTB81059 Offset X X X X

Popular

Choice

lEAthER ClIMBInG StRAPS ARE AvAIlABlE foR All ClIMBERS

tItAnIUM PolE ClIMBERS

titanium Contoured Shank Replaceable Gaff Pole Climbers

titanium non Contoured Shank Replaceable Gaff Pole Climbers

titanium Contoured Shank Permanent Gaff Pole Climbers


Climbers

Buckingham Climbers may be used by persons weighing up to 350 lbs. when

fully outfitted with tools and equipment.


•Black color with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Permanent gaff with 12° angle.




98479 Offset X - -

91079 Offset X X - -

87479 Offset X X X

81059 Offset X X X X

For climbers with a narrow stirrup order 9047

•Blue color with chrome colored gaffs and sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 16° angle




SB94089A Offset X - -

SB91089A Offset X X - -

SB94059A Offset X X X

SB91059A Offset X X X X

For climbers with a narrow stirrup order SB96089A

Popular

Choice

Popular

Choice

StEEl PolE ClIMBERS

Steel Contoured Shank Replaceable Gaff Pole Climbers

Steel Contoured Shank Permanent Gaff Pole Climbers


Clim

bers

Buckingham Climbers may be used by persons weighing 350 lbs. when fully outfitted with tools and equipment.

•Silver color with black gaffs and sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaff gaff with 23° angle.

•Climber with gaff weighs 1 lb. 3.6 oz.

Model # - Style Foot StrapsModel 21391



TB95089 - Offset X - -

TB93089 - Straight X - -

TB95059 - Offset X X X

TB93059 - Straight X X X

For climbers with a narrow stirrup order TB97089

•Silver colored with with black sleeves. •Contoured shank for ankle relief and comfort. •Straight stirrup. •Permanent gaff with 19° angle. •Climber with gaff weighs 1 lb. 3.6 oz.




TB91429R - Straight X - -

TB81429R - Straight X X XPopular

Choice

•Black with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 23° angle.




SB95089 - Offset X - -

SB93089 - Straight X - -

SB95059 - Offset X X X

SB93059 - Straight X X X

For climbers with a narrow stirrup order S97089

Popular

Choice

•Black with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight stirrup. •Permanent gaff with 19° angle.


Leg Straps2239


91429R - Straight X - -

81429R - Straight X X X

For climbers with a narrow stirrup order 9142NR

Popular

Choice

Popular

Choices


tREE ClIMBERS

titanium Contoured Shank Replaceable Gaff tree Climbers

Steel Contoured Shank Replaceable Gaff tree Climbers

titanium Contoured Shank Permanent Gaff tree Climbers

Steel Contoured Shank Permanent Gaff tree Climbers


Climbers

The Buckingham replaceable gaff climber came to being in WWI so the servicemen could climb both trees and poles, and if gaffs became damaged it was easier to carry spare gaffs rather than a whole set of climbers.

NOTE: To order replacement screws: Dowel & Screw: Model N11T, Screw Style: Model 11T (4/pkg), Pin Style: Model 11 (4/pkg)

CCA Gaffs are designed to pen-etrate hard CCA poles with ease.

Gaffs are 16 degree angled.Pole Gaffs Tree Gaffs

Dowel & Screw

Comes with 4 Screws(Climbers

issued Jan. 2011 or

later)

Model NB9106A for use with all T, TB & SB, CCA replaceable

gaff pole climbers.

Model NB9206A for use with all T, TB & SB replaceable gaff

pole climbers.

Model NB9306 for use with all titanium and steel

replaceable gaff tree climbers.

Screw Style

Comes with 4 Screws(Climbers

issued prior to Jan. 2011)

Model T9106A for use with all T, TB & SB, CCA replaceable gaff

pole climbers.

Model T9206A for use with all T, TB & SB replaceable gaff pole

climbers.

Model TB9306 for use

with all titanium and steel replaceable gaff tree climbers.

Pin StyleComes with

4 Drive Lock Pins.(Climbers

issued prior to Oct. 2007) Model 9106 for use with CCA

pole climbers 9109 (straight) and 9009 (offset).

Model 9206 for use with pole climbers 9209 (straight) and

9409 (offset).

Model 9306 for use with tree climbers 9309 (straight) and

9509 (offset)

RUlE of thUMB: Buckingham recommends that all replaceable gaff climbers be replaced when the original gaff and one replacement set of gaffs have been worn out from normal use.

New, &

Improved!

eASIer to

repLACe

Measures2 3/4 (7 cm)

Measures1 3/4" (4.5 cm)


Measures1 3/4 (4.5 cm)






BUCkInGhAM REPlACEABlE GAffS


Clim

bers

(D) The point of the gaff shall cut into the wood and hold. The pole surface cut shall not be longer than 2 inches, measured from the point of gaff entry into the pole to the bottom of the cut on the pole surface.

This test may be used to determine that the gaff is correctly shaped and sharpened to properly penetrate the pole. Place the climber on a flat, soft pine or cedar board as shown in Fig. 1. Holding it upright with the shank parallel to the board, but with no pressure on the stirrup, push the climber forward along the board. If the gaff is properly shaped and sharpened and if the gaff angle with the wood is sufficient, the gaff point will dig into the wood and begin to hold within a distance of approximately 1" (2.54cm). If the climber gaff slides along the wood without digging in, or merely leaves a mark or groove in the wood as shown in Fig. 2 the gaff is either not properly sharpened and shaped or the gaff angle is too small. The gaff angle is built into the climber by the manufacturer and should be between 11 and 17 degrees with the climber placed parallel to the surface of the wood.

An improperly sharpened climber gaff may be as dangerous as a gaff not sharpened at all. The gaff radius tip is critical for gaff penetration. Follow the instructions to be sure of proper maintenance and have a qualified person inspect your work.

(A) Place the climber on the leg, holding the sleeve with the hand (palm facing the pole). With the leg at about a 30° angle to the pole and the foot about 12 inches off the ground, lightly jab the gaff into the pole to a distance of approximately 1/4".

(B) Keeping enough pressure on the stirrup to keep the gaff in the pole but not so much as to cause the gaff to penetrate any deeper, push the climber and the hand toward the pole by moving the knee until the strap loop of the sleeve is against the pole.

(C) Making certain that the strap loop is held against the pole with pressure from the leg, gradually exert full pressure of the foot straight down on the stirrup without raising the other foot off the ground to maintain balance if the gaff does not hold.

InSPECtIon IS YoUR RESPonSIBIlItY!

1. Place climber in a clamp with blocks on each side to protect the climber.

2. File gaff from heel to tip in a smooth over and down motion. Never file across or against the grain or the beehive of the gaff.

3. Slot marked “Correct” on the gaff gauge should be your GUIDE to proper shaping of the gaff tip.

4. Never use a pole gaff shorter than 1 1/4" long. Never use a tree gaff shorter than 2 1/4" long.

5. Check gaff width and thickness at the 1/2" and 1" windows as illustrated in the instructions included with the gaff gauge.

6. Check thickness of stirrup to ensure it is thick enough to support your weight.

Model 6303 (6303C for CCA)

Hint: Before filing, color the gaff with a black marker to ensure you are taking material off evenly.

ClIMBER GUIdEhow to Properly Shape a Gaff

how to Perform the Plane test

how to Perform the Pole Cut out test


Climbers

GAFF REMOVAL1. Secure the climber such that the heads of the gaff attachment screws are facing you. Buckingham Mfg. recommends using a vise to secure. (Use protective jaw covers or small wooden blocks to prevent the climber from being marred). 2. With a 3/16” hex head wrench, loosen and remove the two gaff attachment screws. Remove the gaff from the opposite direction (see fig 1).3. If gaff does not release from the leg iron, gently strike the gaff ridge approximately ½” from the tip on a soft surface such as a block of wood and remove. Ensure no damage is done to the leg iron or gaff dowel hole. Discard the gaff and gaff attachment screws.

GAFF INSTALLATION 1. Press the gaff dowel into the gaff dowel hole of the leg iron, properly orientate the gaff so the tip is facing the stirrup, and align the screw holes of the gaff to the screw holes of the leg iron.2. Insert the two included gaff attachment screws. Hand tighten the bottom gaff screw (nearest the gaff tip). Repeat hand tightening on the top gaff screw. Tighten using a 3/16” x 4” length Allen wrench (with maximum torque to achieve complete and maximum tightness, this method can yield Buckingham’s 235 inch pound tightening recommendation for these screws). Note: use of a longer wrench can yield results exceeding the 235 inch pound recommendation and result in stripping and / or fracture of the screw head. Visually inspect to ensure screw heads are flush with the inside surface of the climber leg iron. Gaff attachment screws should be replaced after the first time removed, but if re-using, apply a low to medium strength thread sealant (Loctite® or equivalent) to prevent the screws from loosening. Screws may not be removable if a permanent type thread sealant is used.

Figure 1

Figure 2 Figure 3 Figure 4

GAFF REMOVAL1. Secure the climber such that the heads of the hex head fasteners are facing you (Buckingham Mfg. recommends using

a vise with protective jaw covers or small wooden blocks to secure the climber). 2. With a 5/32” hex head wrench loosen and remove the two hex head screws. See fig. 1.3. To remove the gaff from the climber place the gaff on a soft surface such as a block of wood and strike the ridge of the

gaff 5/8” from the tip of the gaff. The gaff will come out of the slot. See fig. 2.4. Ensure no damage is done to the climber or climber slot.

ClIMBER GUIdEhow to Change dowel & Screw Style Gaffs on Buckingham Climbers

how to Change Screw Style Gaffs on Buckingham Climbers

GAFF INSTALLATION1. The climber slot and gaff lug are both manufactured for a precision fit. The climbers are then given a protective powder

coat finish that may impede the insertion of gaff into climber slot. The finish may be removed from the boss hole and the gaff lug with fine emery cloth.

2. Press the front of the gaff lug into the climber leg iron slot. (A light coat of grease will ease insertion). It may be necessary to drive the gaff in by striking the back ridge of the gaff on a soft surface such as a block of wood. See Fig. 3

3. Insert the two black grade 8 screws and tighten using a 5/32” x 2 ¾” length Allen wrench. Hand tighten with maximum torque to achieve complete and maximum tightness. This method can yield Buckingham’s 136 inch pound tightening recommendation for these fasteners. Note: use of a longer wrench can yield results exceeding the 136 inch pound recommendation and result in stripping of the screw head. Visually inspect to ensure screw heads are flush with the inside surface of the climber leg iron. See fig. 4.

4. Screw fasteners should be replaced after the first time removed. If re-using, apply a low to medium strength thread sealant (Loctite® or equivalent) to prevent screws from loosening. Screws may not be removable if a permanent type thread sealant is used.


Clim

bers

Notes:

Buckingham is committed to the comfort of Lineman and offers a variety of innovated climber accessories like the Big Buck Wrap Pad.


Clim

ber A

cces

sorie

s

Climber pads are a major factor in the user's comfort. At Buckingham we offer more pad options than any manufacturer. Daily inspection should be done to ensure user's safety.

Buckingham's innovative commitment to climber comfort has led to the production of the Big Buck Wrap Pad. The

Big Buck Wrap Pad is a combination of our two favorite climber pads. We have taken the

adjustability of the Hook and Loop wrap pad, the increased surface area of the Big Buck pad and added a moisture wicking Dri-lex lining. Features also include:• Increased surface area to distribute pressure• Steel 'C-Pad' insert for proper climber shank position• Cinch loop to provide an extra tight fit• Rolled edge to prevent chafing

To order Big Buck Wrap Pads with an angled insert and no cinch use model number 3202.

• 3" and 4" width; with or without a cinch loop • The cinch loop design provides a tight fit

• Rolled edge to prevent chafing • Maximum adjustability

• Available with or without metal inserts • Fits Buckingham, Bashlin, Stringer Brooks* and Klein Climbers.

*To fit Stringer Brooks climber add the suffix 'S' to the model number, e.g. 3500CS with cinch or 3500S without cinch.Hook & Loop Pads with metal insert do not fit Stringer Brooks Climbers.

Model 3202C - Big Buck Wrap Pad

Inspection checkpoints for climber pads:

• Torn stitching • Ripped or torn leather• Loose / Damaged rivets • Hook & loop that does not adhere• Damaged cinch loop • Hook & loop wraps to minimum wrap label (longer

hook & loop straps are available)

Buckingham was the first manufacturer to introduce the industry to the revolutionary idea of the Hook & Loop Wrap Pad. The Hook & Loop Cushion Wrap Pads are easy to put on and more comfortable than conventional climber pads. Hook & Loop Pads feature:

With the help of line personnel in the field Buckingham has developed a new, stronger metal insert that will hold up to the vigorous use in the field and for rodeo participants. Formed strap loop prevents

sleeve from twisting out of insert.

Angled Metal Insert Straight Metal Insert Metal Insert for Klein ClimbersAlso available in straight style

new

new

New & Improved Metal Inserts

Hook & Loop Wrap Pads

Big Buck Wrap Pad

CLIMBer Pads


Climber accessories

Without Cinch• Continuous Wrap• Ideal for Rodeos

With Cinch• Pass Strap through the

cinch loop• Pull Tight & Secure

Add suffix "C" to part number

All wrap pads are offered in XL size. XL adds 4" to length of strap.Recommended for anyone with calf circumference of 21" or larger.

Model 3503 & 3500 - Cushion Wrap Pads without Metal Insert

Buckingham's Cushion Wrap Pads without metal insert secure with hook and loop to allow for maximum adjustability. The Cushion Wrap Pad is available in two different wrap widths: Model 3503 - 3" widthModel 3500 - 4" width.To order pads with a cinch loop, add suffix "C" to the end of the part number.

Metal Insert

Model 3502 & 3504 - Cushion Wrap Pads with Metal InsertThe Cushion Wrap Pad with a metal insert is offered in a straight or angled design, with or without the cinch. The metal insert is designed to keep the climber shank stationary to reduce chafing to the leg. Buckingham does not recommend using angled inserts with twisted shank climbers.

Model 3502KL - 4" AngledModel 3504KL - 4" Straight

Wrap pads for Klein climbers also available with cinch. Add suffix "C" to

part number. Ex. 3502CKL

To fit Klein Climbers add suffix "KL"

Model 35044" Straight

Without Cinch - Continuous Wrap, Ideal for Rodeos

With Cinch (Add suffix "C" to part number) Passes through cinch loop, pull tight and secure

Cushion Wrap Pads with metal insert are offered in two different styles:

Cushion Wrap pads are available with a cinch or without a cinch:

Model 35024" Angled

Cushion Wrap Pads without Metal Insert

Cushion Wrap Pads with Metal Insert

CLIMBer Pads


Clim

ber A

cces

sorie

s

Model 35032 & 35034 - 'C' Pad with Metal Insert

Model 3126 - 'L' Pad

Model 3127 - Climber Pads

Features our new

and Improved metal Insert

The most comfortable 'L' pad on the market. The closed cell foam filler prevents the climber shank from irritating the user's leg. The rolled edges prevents chafing the calf muscle. Provides maximum comfort.

• Rounded edges - no sharp corners to chafe leg• Closed cell foam filler• Tunnel design to hold shank• Requires a 26" strap

The 3127 provides increased support and helps to reduce leg irritation. The 8" wide pad secures the climber to the leg with dual straps and the thick felt filler prevents irritation from the climber shank rubbing the calf muscle.

• Requires two 26" straps• Felt lined• Tunnel design to keep climber shank rigid• Heavy leather construction• Dual strap design provides superior support

The 'C' pad has gotten even better. With the help of line personnel in the field Buckingham has developed a new, stronger metal insert that will hold up to the vigorous use in the field and for rodeo participants. The 'C' pad has also been improved with a new thicker, oversized felt liner for additional comfort. The liner edge minimizes chafing on the leg and the metal insert prevents the climber shank from shifting on the calf, reducing irritation.

Climber pads require a strap to attach the climber and climber pad to the leg.

• Requires a 26" Strap • Felt Lined • Heavy Leather Construction

Style Model Number

Angled 35032

Straight 35034

Klein 35032KL / 35034KL

Replacement Inserts 5032 (angled) / 5032S (straight)

Climber Pads with straps

CLIMBer Pads


Climber accessories

Model 3119 - UnderpadThis Hook and Loop Padded Leg protector mounts directly to the leg and underneath a standard climber pad. Provides an additional 1/4" of padding to protect the calf from being rubbed by the climber shank. Ideal for apprentice training. An elastic strap with hook and loop closure makes it easy to get on and off. It is recommended that users add an additional 2" of length to the top strap for a comfortable fit and adjustment. ONE SIZE FITS ALL. 10"H x 8 1/2"W

Model 3201 - 'I' PadThe 'I' pad cushions only the climber's shank with a minimum addition of weight. All leather construction with 3/4" padding.

Model 3120 - Rivetless PadRivet-less pad with a built in tunnel design. A soft leather is used against the leg. All leather construction with 3/4" padding.

Model 3122 - Climber PadA quality leather pad with 3 loops and a tunnel design to keep climber stationary. All leather construction with 3/4" padding.

Model 3125 - 'L' Tunnel PadThe 'L' Tunnel pad has a soft 3/4" cushion sandwiched between two pieces of leather. 3 loops and a tunnel design to keep climber stationary.

Model 3124 - 'T' PadThe 'T' pad has a thick felt liner and a tunnel design to stabilize the climber shank. All leather construction with 3/4" padding.

Model 3118 - Big Buck Pad Big Buck climber pad utilizes

a double strap system, that fits 1" and 1 1/4" straps, to secure the pad to the calf resulting in superior support of the leg. An

angled metal insert prevents the climber shank from shifting on the calf and the thick felt padding adds to the overall comfort making this climber pad a favorite among linemen and arborists. Comes with two pairs of 2639 straps (Big Buck pad requires two pair of leg straps). 9"H x 121/2"W

Climber Pads with straps

CLIMBer Pads


Clim

ber A

cces

sorie

s

Two piece strap is permanently attached to stirrup ring.

One piece strap are used to weave through stirrup loop or as top straps

Safety Note: Climber straps should be inspected daily.

Inspect for: •cuts, nicks or cracks •elongated holes •rotted leather

•faulty buckle

Sold in Pairs1" (25mm) 1" (25mm)

Nylon Latigo Leather

22" (56cm) 2239 2234

24" (61cm) 2439 2434

24" (61cm) with Buckle Pad 2449 2444

26" (66cm) 2639 2634


28" (71cm) 2839 28344


30" (76cm) - 263432

30" (76cm) with Buckle Pad 3049 -

Sold in Pairs1" (25mm) 1" (25mm)

Nylon Latigo Leather

26" (66cm) assembled 21391 21341

26" (66cm) unassembled 2139 2134

CLIMBer straPs

single Piece straps

Climber straps

two Piece straps


Climber accessories

Model 3128 - Shank PadIf the climber shank irritates your ankle try the benefit of a pad designed to cushion this tender area. A cushion between the climber and your ankle prevents the irritation.

Model 10 - Climber ShieldA light weight shield that is ideal for apprentices. Helps prevent gaff puncture wounds when learning to climb. Shield attaches easily with one screw to the climber shank. Slot in shield allows for climber foot strap.

OSHA requires gaff guards when climbers

are not in use. 6909U - A coated wire univer-sal pole gaff guard that fits all

pole climbers: Buckingham, Bashlin, Klein and Stringer

Brooks.

6909 - Only for Buckingham permanent pole gaff climbers.

60091 - Leather Gaff Guard

with hook and loop fasteners60091 - Tree60092 - Pole

Fits all climbers.

6909A Snap on Gaff Guard fits all Buckingham replaceable pole gaffs with a 16° angle

(A style).

60094 - Leather Gaff Guard

works with all manufacturers replaceable or permanent pole gaff climbers. Hook and loop closures and reinforced steel rivets to prevent gaff tip from

protruding.

60093 - Leather Gaff Guard with Bungee strap that at-

taches to the sleeve loop. Fits all climbers.

6009 - Leather Gaff Guard with

a buckle fastener. Fits all climbers.

Model 35033 - Climber FootplateThe climber footplate attaches easily to any steel or titanium climber. Two plate construction fastened together with two screws. Simply screw the two plates together with the rubber sole down. Standing on the pole was never so comfortable. Instructions packed with footplate. To order replacement screws use part #14. Not for use with aluminum climbers.

Comfort and safety are features Buckingham strives to provide our customers

new

CLIMBer aCCessorIes

Gaff Guards

Climber shields, shank Pads & Footplates


Clim

ber A

cces

sorie

s

996 - Sleeve Fasteners

Model 6027 - Holder - Multi-Gaff Gauge Holder for the crew foreman or safety director who has to check more than one manufacturers' climbers. Order gauges separately.

Complete illustrated instructions are provided in a protective covering.

They show each step in the shaping operation. Each tool may be

purchased separately.

Model - 6303 Pole Gaff Shaping GaugeModel - 6303C CCA Pole Gaff Shaping GaugeModel - 6306 Tree Gaff Shaping Gauge

Buckingham Gaff GaugeCorrectly shaped gaffs are essential for climbing. The Buckingham gauge is your guide to proper shaping. It is compact, uncomplicated, revealing and indispensable. Your gauge should be a busy tool. It defines your work, checks your progress and judges your results.In 30 seconds time the gauge will survey the condition of your climbers and indicate what is wrong, where it is wrong, and what needs to be done.

Model 6025 & 6025C - Gaff Maintenance Kit - Correctly shaped gaffs are essential for climbing safety. Buckingham offers a gaff maintenance

kit to safely and properly shape gaffs. Kit includes:

9215 - Sleeve Fasteners (Barrel)

Model 996 & 9215 Sleeve Fasteners - There are two replacement sleeve fasteners. Model 996 uses a 10/32 threaded sem, and Model 9215 uses a barrel fastener and screw. Examine the hole in your climbers to see if they are threaded or smooth. Use Model 996 if threaded and, if smooth, use Model 9215.

Model 9204 Sleeves - Chrome colored short sleeves adjust from 16 1/4" to 18 3/4" for standard length climbers. Narrow stirrup climbers adjust from 14 1/2" to 17 1/4".Model 9202 Long Sleeves - Chrome colored long sleeves adjust from 19 1/4" to 21 3/4" for standard length climbers. Narrow stirrup climbers adjust from 17 1/4" to 20 1/4".

9204

9202

Model 9218 Split Ring - Replacement Split Rings for use with two piece climber straps. Split rings are sold in pairs.

Order Model 6025C for CCA Kit

6058 smooth, single cut file6303 pole gaff gauge (6303C for CCA Gaff)6501 finishing hone

CLIMBer aCCessorIesMiscellaneous Climber accessories

Gaff Maintenance

Climb Comfortably with the new line of Ergovation products including the Buck ErgoBelt. Your back will thank you!


Body

Belt

s Over the years, Linemen have had to adapt to the equipment they used causing stress and strain on their bodies. Buckingham teamed up with Ergonomic Specialist to design a line of products specifically for Linemen and Arborist that fit the human skeletal structure and make work more comfortable, safe and productive. The new Ergovation line from Buckingham makes hard work comfortable.

Traditional Lineman's BeltConsist of two dee rings and offers no back support which can cause a

curve in the lower back.

Model 4200 - Buck ErgoBeltConsist of four dee rings and offers proper back support.

Back Not

Supported

Back Supported

Model 4201 & 4202 Buck LineBackerConsist of four dee rings and offers

proper back support.

Back Supported

Model 4200 - Buck ErgoBeltModel 4201 - Deluxe LineBacker

Model 4202 - LineBacker

new

New Body BeltsBuck ergoBelt & lineBacker


Body Belts

To size the Buck ErgoBelt, Buck LineBacker and the Buck LineBacker Deluxe for proper fit, the ‘A’ and ‘B’ measurements are required:• Measurement ‘A’ is measured approximately 2” above waist and from center of hip bone (seam of shirt) around the small of the back to the center of hip bone (seam of shirt) on other side.• Measurement ‘B’ is from center of navel around the small of the back to the center of navel. Measurement ‘B’ is taken in the same location as measurement ‘A’.

X - Distance from waist to top of hip bone to where body belt is worn.Y - Measurement is from front of hip bone around the back to the front of the other hip bone.Measure - ("Y" distance) is hip to hip and add 2" to padded belts and 4" for lightweight Dri-lex belts.

The most critical measurement of a traditional body belt, in terms of comfort, is the dee measurement. The proper dee size is normally found by measuring from the prominent part of one hip bone around the back to the same point on the other hip bone. Add 4" (102mm) for light weight and Dri-lex® belts, and 2" (50mm) for padded belts so that the dee ring heels are just forward of the hip bones and not on them. All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurements are shown on the next page.

Measurement B

Measurement

A

34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

16

17

18

19

20

21

22

23

24

25

26

27

28

29

Body Belt siziNgBuck ergoBelt & lineBacker sizing

Conventional Body Belt sizing


Body

Belt

s

All Buckingham body belts meet applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all consensus and governing standards. Every Buckingham body belt is designed to provide the user with maximum comfort, safety and the necessary belt accessories. Body belts are designed for work positioning and not intended for fall arrest.

All body belts come with pouch tabs, a tape thong, knife snap, sleeve bag ring, gut strap or suspender rings, and tool loops. All neoprene impregnated waist straps have 9 holes punched in the waist strap to accommodate for adjustment of heavy clothing in the winter.

Buckingham body belts are tested to 350 lbs. A person who’s weight and tools do not exceed 350 lbs. can work safely. There is a surcharge for persons requiring a body belt larger than size 30 or smaller than size 18. Special sized body belts may not be returned.

On Semi-float body belts the dee rings are stationary and the waist strap shifts within the back pad.

The full float body belt allows the dee rings to shift approximately 4" and the waist strap is stationary.

Full Float Semi Float

Left Handed Body Belts can be ordered by adding suffix '0' to belt size. Ex: 2000M-220

Model 6087Model 6087 - Sizing BeltThis sizing belt ensures accurate dee measurement. This belt is designed to provide the user with an exact hip to hip measurement. For proper belt size add 2 inches to padded belts and 4 inches to lightweight Dri-lex belts. Measures sizes 18 to 30.

*Belt Strap is Not Waist Size.

For proper sizing, follow the body belt sizing instructions or previous page.

Dee Size Belt Strap Min Belt Strap Cen-ter Hole Belt Strap Max Number

of Tool Loopsin. cm. in. cm. in. cm. in. cm.

D 18 46 32 81 36 91 40 102 3

D 19 48 33 84 37 94 41 104 3

D 20 51 34 86 38 97 42 107 3

D 21 53 36 91 40 102 44 112 4

D 22 56 37 94 41 104 45 114 4

D 23 58 38 97 42 107 46 117 4

D 24 61 40 102 44 112 48 122 4

D 25 64 41 104 45 114 49 125 4

D 26 66 42 107 46 117 50 127 4

D 27 69 44 112 48 122 52 132 4

D 28 71 45 114 49 125 53 135 4

D 29 74 46 117 50 127 54 137 4

D 30 76 47 119 51 130 55 140 4

Body Belt iNformatioN

dee sizing Chart

types of Body Belts


Body Belts

Model 2100M is handcrafted of the highest quality leather. Bridge pieces and belt straps are crafted of leather

with a nylon center to provide strength and longer life. Body belt features a 5 1/2" foam cushioned pad reinforced with rawhide lace, 2 large full float

double bar dee rings, 2 small upper dee rings, 9" Back Pad. Waist strap only; no

upper gut strap. Available in black (BL), burgundy (BU) and brown (BR). Weight

7.8 lbs. Measures 9"H.

Model 2107M is handcrafted of the highest quality leather. Bridge pieces and belt straps are crafted of leather

with a nylon center to provide strength and longer life. Body belt features a 5 1/2" foam cushioned pad reinforced with rawhide lace, 2 large full float

double bar dee rings, 2 small upper dee rings, 9" Padded Back Pad. Removable

MAN RATED gut strap. Available in black (BL), burgundy (BU) and brown (BR).

Weight 9.2 lbs. Measures 9"H.

Model 2019M Lightweight Dri-lex® lined body belt features, stacked dee rings, 2 large full float double bar dee, 2 small upper dee rings. Back support;

no gut strap. Weight 6.35 lbs. Measures 9"H.

Model 2018M- Same as the 2019M but with a removable MAN RATED gut

strap. (Must be used with a Buckingham provided man rated gut strap.)

Measures 9"H.

Pending

Body Beltsfull float, four dee, stacked Body Belts with Backsavers

leather & lightweight dri-lex®


Body

Belt

s

Model 2000EM - This is the finest belt available and is hand crafted

of the highest quality leather. It features a full float body belt

with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and

longer life. The floating dees provide 4" lateral movement to reduce the

wear on the pole strap. Available in Black (BL), Burgundy (BU), or Brown

(BR). Weight 7 lbs.

Model 2014M - Lightweight Dri-lex® lined body belt features four in line

dee rings for attaching another strap when crossing an obstacle on the

pole: 2 large full float double bar dee (front), 2 small dee rings (back), 5" cushioned back pad. Weight 6.35

lbs.

Model 2015M - Like the 2014M with an 8" back pad to provide additional

support, this Lightweight Dri-lex® lined body belt features four in line

dee rings for attaching another strap when crossing an obstacle on the pole: 2 large full float double bar

dee (front), 2 small dee rings (back). Weight 6.5 lbs.

Model 2017M Lightweight Dri-lex® lined body belt features four in line

dee rings for attaching another strap when crossing an obstacle on the

pole: 2 large full float double bar dee (front), 2 small dee rings (back). Man Rated removable gut strap. Weight

6.5 lbs.

Body Beltsfull float, four dee, in-line Body Belts

leather & lightweight dri-lex®


Body BeltsModel 2000M - This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4" lateral movement to reduce the wear on the pole strap. Available in Black (BL), Burgundy (BU) or Brown (BR). Weight 7 lbs. Measures 5 1/2"H.

Model 1988M - This full float body belt has a 5 1/2" wide pad and utilizes a leather lined 6-ply neoprene impregnated nylon waist strap. The pad has a soft cushion to provide the user maximum comfort. The laced belt offers a quality look and added longevity for the user. Weight 7 lbs.

Model 1962M - A full float body belt constructed of the highest quality leather with a 6-ply neoprene impregnated waist nylon. The pad has rounded corners on the front to eliminate sharp edges from irritating the user when bending or reaching. The pad is 5" wide. Weight 5 lbs.

Model 19655M - The economy model of traditional full float body belts. The padded leather liner has a soft cushion. The 1 3/4" waist strap is made of 6-ply neoprene impregnated nylon. The formed leather bridge pieces allows the dee rings to float smoothly and easily. The pad width is 5". Weight 5 lbs.

Body Beltsfull float, two dee Body Belts

Add Suffix 'E' for four dee rings, applicable to all 2000 Series (special order only)


Body

Belt

s

Model 2012M - A light weight full float body belt with a 5" Dri-lex® lined cushion pad designed to wick moisture away from the user. Superior comfort is provided by extra padding in the back support. Weight 6 lbs.

Model 2013M - A light weight full float body belt with a 8" Dri-lex® lined cushion pad designed to wick moisture away from the user. Superior comfort is provided by extra padding in the back support. Weight 6.2 lbs.

Model 1993F - A lightweight full float body belt with an extra wide back support. The back pad is 8" of continuous firm cushion lined with durable brushed leather. The 1 3/4" waist strap is 6-ply neoprene impregnated nylon with 9 adjustment holes. Weight 6 lbs.

Model 1994FR - Designed to be functional, yet lightweight. Waist strap is constructed of 1 3/4" 6-ply neoprene nylon with 9 adjustment holes. 5" wide pad has rounded edges for added comfort and is covered with tuff duck nylon on the outside and brush leather against the user's back. Weight 6 lbs.

Body Beltsfull float, two dee Body Belts



Body BeltsModel 20003M - The body belt section of Model 20003M is constructed using the padded

2000M belt and has the added feature of a stitched on backsaver. The extra width provides

support to the back helping to relieve lower back strain. The backsaver helps hold the belt and the dee rings in the perfect location. The

backsaver is tightened by the single strap with a tongue buckle. Backsaver is not designed as a life

support belt. Available in Black (BL), Burgundy (BU), or Brown (BR). Measures 11 3/8" H.

Model 20005M - The backsaver attached to the padded 2000M body belt allows the user to adjust the back rest using two straps in the center of the back. The front of the backsaver

is tightened using a single strap with a tongue buckle. Backsaver is not designed as a life

support. Weight 7 lbs. Available in Black (BL) Burgundy (BU), and Brown (BR). Weighs 7 lbs.

Measures 12 1/2" H.

Model 20006M - The body belt section of Model 20006M is constructed using the 2000M belt with padding removed and has the added

feature of a backsaver constructed from a single piece of leather, eliminating a ridge line and

minimizing chafing. Back Pad provides support to the back and fits comfortably on those with a shorter torso. The backsaver helps hold the belt and the dee rings in the perfect location. The backsaver is tightened by the single strap

with a tongue buckle. Backsaver is not designed as a life support belt. Available in Black (BL), Burgundy (BU), or Brown (BR). Weighs 7 lbs.

Measures 9" H.

Body Beltsfull float, two dee Body Belts with Backsaver



Body

Belt

s

Model 38523Q1 - Made of 1 3/4" (44mm) woven nylon sewn to a man-made synthetic material wear. A 3" (76mm) wide soft woven

pad is attached for added comfort. Features leather tool loops, pouch tabs, tape thong and grommet holes on the billet end of strap for adjustment. Also features 2 stationary work positioning dee rings.

Model 1958 - This body belt has a 5" wide back pad made of the highest quality leather. The 1 3/4" waist strap is 6-ply

neoprene impregnated nylon. The pad corners are rounded to prevent irritation when bending or reaching. Weighs 5 lbs.

Model 1902 - This body belt is an economy model of the typical linemen's belt using

quality leathers with a 6-ply neoprene impregnated nylon 1 3/4" waist strap. The rounded edge and the 5" pad make this a favorite body belt among fixed dee ring, semi-float body belt users. Weighs 5 lbs.

Model 1997T2 - This body belt is a light weight semi-float body belt that can be

attached to a harness utilizing quick connect plastic clips. This belt is ideal for someone

climbing towers and needing back support and a place to hold tools. Weighs 4 lbs.

Typical Fit of a Ladder Belt for a Person with Waist Size:

24 - 28 X-Small

28 - 32 Small

32 - 36 Medium

36 - 40 Large

40 - 44 X-Large

Body Beltssemi float Body Belts

ladder Belts

Belts are made so the waist strap shifts within the back pad


Body Belts

For an additional charge, leather suspenders & gut straps may be ordered in black, brown or burgundy to match your body belt.

Model 62531 - Gut StrapDesigned for comfort and functionality. Sponge lined pad relieves irritation when bending. Connecting straps and snaps slide on the waist strap for aligning to suspension dee rings on body belt. Each snap supports up to 25 lbs. Model 6272 - Gut Strap with Back Support

Attaches to any body belt with four suspension dee rings. Back support features dual take-up straps in the back, wide back saver, and a front buckle to assure a comfortable fit. Backsaver width 9". For proper fit: take the dee size center hole measurement on Body Belt Sizing and subtract 2 i.e. dee size 23, center hole measurement is 42", subtract 2 and order a 6272-40.)

Model 6258 Leather suspenders with shoulder pads are used to support the weight of the belt and tools. The 6258 uses a snap hook with a flat keeper to prevent the snap from disengaging accidentally (25 lbs. maximum support).

Model 62583-LeatherModel 62593 - NylonA suspender that attaches to the belt using adjustment buckles that form a loop. Ideal if your body belt does not have suspension dee rings.

Model 6259 Woven nylon with leather shoulder pads designed to disburse the weight of the belt and tools. Straight keeper snap used to attach suspender to the body belt (25 lbs. maximum support).

Model 6256 - Gut StrapGut Strap is a 4 ply nylon 1 3/4" waist belt with a wide leather pad to help support belt and provide added comfort.

Model 6257 - Gut StrapGut Strap is a heavy 1 3/4" leather waist belt with 4 buckles and snaps designed to help support the tool belt and tools.

Model 6263 - Man Rated Gut StrapGut Strap is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and standard tongue buckle.

Model 6264 - Man Rated Gut StrapGut Strap is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and easy to use quick connect buckles.

Suspenders are not intended to hold the belt without the assistance of the body belt waist strap being buckled. One Size Fits All.

Gut Straps are not to be used solely to support belt without assistance of body belt waist strap. Never detach the body belt waist strap tongue from the billet end of the waist while working aloft.

Typical Fits for a Person with Waist Size::24 - 28 X-Small28 - 32 Small32 - 36 Medium36 - 40 Large40 - 44 X-Large

new

Body Belts aCCessoriessuspenders

man rated gut straps

Non man rated gut straps

gut strap sizing


Body

Belt

s

E. Model 6109A wire hour glass shaped handline carrier that separates when approximately 14 - 18 lbs. of pressure is applied.

A. Model 6107Tape thongs connect to belt or holster by a rivet or barrel fastener.

D. Model 6104Lowell Wrench holder constructed of two layers of heavy leather with a steel bracket. Barrel fasteners provided. (Wrench is not included.)

C. Model 6102A durable wrench keeper designed to attach to the body belt. The strong leather back holds heavy tools the Bell Wrench. (Wrench is not included.) 2 1/2" x 3 3/4"

Model 201 CleanerModel 202 ConditionerClean and recondition your leather products regularly to extend their life. Lexol cleaner removes dirt and grime and the conditioner restores essential oils to keep leather soft and supple.

Model 2406Handline HookA reliable tool to raise and lower material at the work site. The welded eye and formed hook is rated to 500 lbs.

Model 2407-80 Handline System to raise and lower material at the work site. Includes the 500 lb. rated Buckingham handline hook, 750 lb. test rope snap, a 1000 lb. nylon block and 80' of 12 strand rope. The kit can also be purchased with 60', 100' and 120' rope lengths [2407-60, 2407-100 and 2407-120]. Custom rope lengths available upon request.

A.

F.

D.

F. Model 2402 A nylon handline carrier that will straighten when approximately 14 - 18 lbs. pressure is applied to allow the handline to pull free.

B.C.

E.

B. Model 341 Leather adjustable loop and strap to fit up to a 2" belt.

Body Belts aCCessoriesaccessories


Body BeltsImmediately remove the belt from service if any of these conditions exist.

An extra hole was punched to fit a larger user.

Do Not Use Improperly Configured Dee Rings when using a positioning strap with non-locking snap hooks

Double Bar Dee Ring straight sides

Properly shaped 'S' bend

Single Bar Dee Ring straight sides

Use Properly Shaped Dee Rings When Using Non-locking Snap Hooks

Excessive 'S' Bend

Exterior Circle Shaped Dee Ring

'D' Dee Ring

• Modify or punch a hole in a support component of the body belt.• Use a body belt made of all leather.• Disconnect waist strap and rely on gut strap or suspenders (suspenders & gut straps are rated to maximum of 25 lbs.).• Use an accessory ring, snap or suspender rings for work positioning.

• Cracks, nicks, distortion, or corrosion of hardware

• Loose or worn rivets

• Worn material

• Tool loops worn to allow tools to fall free

• Loose stitching, broken threads or burns

• Loose grommets or elongated holes on waist strap

• Broken accessory snap or ring

• Pocket tabs that won’t support pouches and tools

notes:

Inspect Your Body Belt

Prior to Each Use!

Body Belts safety tipsinspect for

Never!

Buckingham strongly recommends the Use of locking snap Hooks


Body

Belt

s

notes:

Buckingham's Pouches and Holsters are made with the highest quality leather and are built to last.Photo courtesy of Northwest Lineman College


Pouc

hes &

hols

ters Pouches & holsters

Model 49190• 6 Pockets • 10" x 3 1/2"

Model 42266S-BR• 5 Pockets • 2 Way Knife Snap • 8" x 9 1/4"

Model 4923• 3 Pockets • 11" x 6

1/4"

Leather holsters are made of heavy tanned leather. Pouches and Holsters may be ordered, at an additional charge, to match body belt colors in black (BL suffix), brown (BR suffix), or burgundy (BU suffix). For left handed persons add suffix 'L' to reverse pockets. To prevent your holster from hanging too low order the short back holster by adding suffix 'S'.

Model 49261S• 4 Pocket • 8" x 5"

• Short back • 2 Way Knife Snap

Model 492614 Pockets • 11" x 6 1/4"

• 2 Way Knife Snap

Model 4926-BR• 4 Pockets • 11" x 6 1/4"

Model 4951-BL• 2 speed wrench slots

• 10" x 7" •3 Pocket

Model 42266• 5 Pockets • 10 3/4" x 8"

• 2 Way Knife Snap

Model 66Burr and Barrel Nut Fas-tener Kit. One assem-bled unit per package.

Unassembled

Assembled

Model 42666-BL• 5 Pockets • 10 3/4" x 8" • 2 Way Knife

Snap • 4089 Knife Sheath Attached

Double back holsters stay rigid, even after years of use, to ensure easy tool removal from the pockets. The double back design features pockets that are riveted to a thick layer of leather with another leather layer sewn over the rivet heads. Sandwiched in the middle of the leather layers is a plastic stiffener to keep the back rigid.

ChoiCe!

Double Back holsters


Pouches & holsters

Pouches & holstersBuckingham holsters are constructed of the highest quality leather and built to last. Our craftsmen take pride in their work and years of experience has proven to be an asset to manufacturing the best.

Model 4223• 3 Pockets • 10 1/4" x 6"

Model 4051• 1 Pocket • 11 3/4" x 3 3/4"

Model 4020• 2 Pockets • 11 1//2" x 4"

Model 4226• 4 Pockets • 11” x 6 1/4”

Model 4079• Knife Sheath

• 9 1/2" x 3"

Model 40231-BR• 3 Pockets

• 11 1/4" x 6 1/4"

Model 4023• 3 Pockets

• 11 1/4" x 6 1/4"

Model 4659• 9 Pockets w/ Ham-

mer Loop & Tape Thong

• 11" x 9 1/2"

Model 4164• 8 Pockets • 10" x 7" Model 4650

• 5 Pockets • 10" x 8 1/4"

Model 4089• Knife Sheath

• 9 1/2" x 3"

Model 5041 Top View

Model 5041• 4 Pockets, 5 Tool Loops

• 9 1/4" x 5 1/2"

Model 40892• Knife Sheath with Steel

Clip •8 1/2" x 3"

single Back holsters

Miscellaneous holsters


Pouc

hes &

hols

ters Pouches & holsters

Model 931• 5 Pocket

• 10 1/2" x 4 5/8"

Model 930• 3 Pockets

• 10 1/2" x 4 5/8"

Model 945 LEA• Tool Holster

• 5 Pockets, 4 Tool Loops • 8 1/2" x 6"

Model 945 LEA Top View

Model 4013• 1 Scissor Pocket

• 6" x 2"

Model 628 Side View

Model 628•3 Pockets

• 6 3/4" x 5 3/4"

Model 4191 Top View

Model 4191• 7 Pockets, 4 Tool Loops

• 8" x 6" x 2"

Model 4074• 1 Tool Loop • 11" x 3 3/4"

Model 4076• Spray Can Holder

• 1 Pocket• 8" x 4"

Model 949C• Made from ballistic Nylon

• 15 pockets • 2" Tunnel to pass belt through

(Tools not Included)

new

Miscellaneous holsters


Pouches & holsters

Pouches & holsters

Model 4578Nut & Bolt Bag

Extra heavy duty nut & bolt bag with a covered front

pocket.10 1/4" x 10"

Model 5299 - Nut & Bolt Bag Available in Brown (BR), Black

(BL), and Burgundy (BU). To specify color, add the

designated abbreviation as a suffix to the model number.

10 1/4" x 10"

Model 52993-BR - Nut & Bolt BagLike Model 5299 with 3 inside

pockets to accommodate speed wrenches. Available in Brown (BR), Black (BL), and Burgundy (BU). To specify color, add the designated

abbreviation as a suffix to the model number.

10 1/4" x 10"

Model 5302 - Nut & Bolt BagA heavy duty Nut and Bolt Bag

with side gussets to keep the bag open. Raw hide lace provided to connect to body belt. 9" x 6 1/2"

Model 628721" wide, 50" long belt designed so user can cut

off excess strap.

Model 1285 - Electrician Belt• 1 3/4" Wide • Accessory snap

• Tool loop • Tape thong

Model 6286 - Telephone Installers Belt• 1 1/4" Wide • Adjustable slide buckle

• T-buckle connection • Telephone hanger

Model 5279 - Carry All Belt• 2" Wide •Double Tongue

ChoiCe!

Model 6287• 1 3/4" Wide • Single Tongue

Order Industrial Carry Belts By Waist Size

Fit is important to comfort. Be sure to allow for wear over

heavy clothing.

SizeTypically Fit for a

Person with Waist Size

Small 28-32

Medium 32-36

Large 36-40

X-Large 40-44

leather Nut & Bolt Bags

Industrial carry Belts


Pouc

hes &

hols

ters

46Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com 46Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

notes:

Buckingham has been a leader in Wood Pole Fall Restraint Systems for over 10 years and continues to offer innovative products like the BuckSqueeze and SuperSqueeze to fit many climbing styles.


Posi

tioni

ng st

raPs

In production since 2000, the BuckSqueeze is the most widely used Wood Pole Fall Restriction Device in the U.S. With thousands in use and numerous documented saves, the BuckSqueeze provides Wood Pole Fall Protection during ascent and descent. With the use of a secondary lanyard, like the BuckAdjuster, the user is still protected while climbing over obstacles. Designed to grip the pole if the user starts to fall. For distribution poles with a circumference up to 50" (16" diameter) and transmission poles with a circumference up to 90" (28.7" diameter). Both 2011 & 2010 models are rated to 350 lbs.

• One disconnect to climb over an obstruction• Does not work itself out of adjustment • Friction buckle & cam buckle adjustments at user’s sides makes it easy to adjust for the circumference of the pole

• No tongue buckle to adjust at the back of the pole• One model, with accessories, can be used during all seasons: Wet or Iced Poles with or without Conduit• CSA AB Certified

Buckingham, leaders in Wood Pole Fall Restraint Systems for over 10 years, is pleased to offer multiple options to fit your climbing style. With outstanding factory support and follow up training, Buckingham Wood Pole Fall Restraint Systems are an easy choice.

2010 Enhanced BuckSqueezeModel 483D - For distribution polesModel 484T - For transmission poles

G. WebGrab (Patent Pending): Added to the green strap for even easier adjustment. (New 2011 Model)

A.

B.

C.

D.E.

F.

Buckingham has yet again enhanced the BuckSqueeze by adding their WebGrab to the green

strap for even easier adjustment.

A. 3 Slot Dee: Modifications were made with the 3 slot dee to increase rigidity of the strap while hitchhiking. All three slots are usable, but the center provides maximum rigidity.B. Serrated Roto-Snap: Carabiner with teeth that increases stopping power.C. Linkless Snap (Patent Pending): Less metal and easier adjustment to and from the pole.D. NEW Gold Spring Cam: Reduced tension to ease adjustment of brown strap. 13.43 lbf. to adjust.

E. Cleat: Threaded removable cleat built into the housing of the CAM buckle improves the arresting ability in the event of a fall.F. Channel Handle: Paddle handle has a channel allowing the webbing to glide freely keeping the strap evenly spaced while ascending and descending.

A. B.

D.E.

F.

G.

new

2011 BuckSqueeze with WebGrabModel 482D - For distribution polesModel 482T - For transmission poles

Model 483DModel 482D

The original BuckSqueeze concept featuring a spring loaded cam to adjust the brown strap.

The BuckSqueeze

Benefits

Features

Wood Pole Fall ReSTRainT SySTemS


PoSiTioning STRaPS

• Easy One Handed Brown Strap & Green Woven Strap Adjustment with the New Buck WebGrab• Same Adjustability as the Rope BuckGrab but on Web• Modular Design for Easy Strap Change Out• Can Easily Change Out Worn or Damaged Components or Straps in the Field• Can Easily Be Configured to Use A Rope or Web Strap• One Disconnect to Climb Over An Obstruction

• Can Be Assembled for Right Handed or Left Handed Individuals• Outstanding Factory Support - Follow Up Training After The Sale• Lightweight Design: Rope Model = 4.5 lbs & Web Model = 4.85 lbs• Meets ASTM F887-11 Including Dry Pole, Wet Pole, Conduit & Iced Pole• All Straps & Rope Have Red Warning Center• 3600 lb. Gate Rated Hardware

The SuperSqueeze offers superb Wood Pole Fall Restriction and offers the easiest adjustment on the market. With Buckingham's patent pending WebGrab the SuperSqueeze can be adjusted with just a flick of the wrist. The SuperSqueeze can be configured to fit many climbing styles and needs, and it's modular design makes it easy to change

out worn or damaged components or straps in the field. Rated to 310 lbs.

Buck WebGrabEasiest Adjustment for the Circumference of the Pole and Distance from the Pole

new

Benefits & Features

The SuperSqueeze

Wood Pole Fall ReSTRainT SySTemS

Available with CarabinersModel 488W2 for Distribution

Model 488TW2 for Transmission

Available with CarabinersModel 488R for Distribution

Model 488RT for Transmission

Model 488RQ4 for DistributionModel 488RTQ4 for Transmission

Features a rope inner strap with BuckGrab LAD, and WebGrab on the brown strap.

Model 488W2Q3 for DistributionModel 488TW2Q3 for TransmissionFeatures a WebGrab on the inner strap

as well as the brown strap.


Posi

tioni

ng st

raPs

Pole top rescue requires practice to be proficient in a real life situation. Buckingham offers practice kits so expensive units are not damaged

Model 38N99E - Pole Top Rescue with Conventional Positioning Strap

Replacement Practice Straps• 483A - 30 1/2" Nylon Strip with holes• 483A-50 - 50' Webbing with punched holes

Model 5004B - BuckGrabPatent Pending

Model 485BuckToothUsed for climbing icy poles.

Model 487 - BuckWheelUsed for icy or slippery poles. Angled wheel allows cutting edge to penetrate through ice and into the pole to arrest a fall.

Great for use with the BuckSqueeze and SuperSqueeze.

Model 9-8 - BuckAdjuster(9 designates model # and 8 is the length in feet)

• May be used as a primary work positioning device.• Stitched 1/2" rope lanyard with 1706 Snap Hook.

• Green and white jacket with red core.• Features the new BuckGrab 5004B

LAD (Length Adjusting Device)

Model 48129W2Y - SuperStrap• Features the new patent pending WebGrab for easy adjustment.• Has all the benefits of web combined with the easy adjustment of rope.• Designed to use climbing over obstructionModel 48129W2Y-6 - 6'Model 48129W2Y-7 - 7'Model 48129W2Y-8 - 8'Model 48129W2Y-9 - 9'

Model 4812Y-8Secondary Web Lanyard• Web Lanyard has a friction buckle for adjustment

During practice the only part that is cut is the 12" 6-ply neoprene piece that can be used 3 times and is less costly than cutting a pole strap. It simulates how difficult it is to cut the pole strap in a real emergency. The other components of the system may be reused.

Model 483M - BuckSqueeze Rescue TrainerPractice BuckSqueeze unit for hurt man rescue training. During practice the only part that is cut is the 30 1/2" orange nylon webbing. With replacement of the 30 1/2" strip, the unit can be reused.• 483A: 30 1/2" nylon strip with holes.• 483A-50: 50' of webbing with punched holes.

Model 483M

Model 483A

new

• Model 38A-150150' of six-ply neoprene with buckle holes spaced every three inches.

For BuckSqueeze Models Prior to 2010Model 483C1-6 - Wear GuardFor BuckSqueeze or Web SuperSqueeze. Made from black belting.

Model 483C-6 Wear Guardfor BuckSqueeze or Web SuperSqueeze. Made from black leather.

Wood Pole Fall ReSTRainT acceSSoRieSBuckSqueeze / SuperSqueeze Accessories

WPFR Secondary Positioning Straps

Practice Pole Top Rescue

• Model 38ATwo 12" six-ply neoprene strips with 4 punched holes.


PoSiTioning STRaPS

Positioning straps, commonly referred to as pole straps or safety straps, are one part of a work positioning system designed to provide the user the ability to work and have free use of both hands. The positioning strap is not intended to be used as a fall protection device unless the user secures their strap above a cross arm, lattice tower, etc. limiting the fall distance to less than two feet. Buckingham provides the widest choice of positioning strap styles and options.

Tongue BuckleTongue Buckle

Model 494299E

Model 48129Y-6

There are three basic types of material used to manufacture a pole strap: 6-ply neoprene impregnated nylon, leather with a nylon center and woven nylon.

6-ply neoprene impregnated is the most widely used among utility line personnel. The 6-Ply neoprene features excellent abrasion resistance, contrasting center color to alert user to replace, stiff material to start & slides on pole easily.

Model 386099E

Model 386099E

Slide Buckle

Model 346099E

Length 99E Lockers 77 Lockers

5'8" 384299E 384277

6' 386099E 386077

6'6" 386699E 386677

7' 387099E 387077

8' 388099E 388077


5'8" 344299E 344277

6' 346099E 346077

6'6" 346699E 346677

7' 347099E 347077

8' 348099E 348077

ChoiCe!


6' 48129Y-6 48127Y-6

6'6" 48129Y-66 48127Y-66

7' 48129Y-7 48127Y-7

8' 48129Y-8 48127Y-8

The woven nylon positioning strap uses a friction buckle in conjunction with a carabiner.


5'8" 364299E 364277

6' 366099E 366077

6'6" 366699E 366677

7' 367099E 367077

A timeless tool among linemen and available in black (BL), burgundy (BU) and brown (BR). Features a tongue buckle and nylon center as a wear indicator.

Adjusts easily with a friction buckle. Ideal for transmission towers, substations or ladders. Has contrasting red color to alert for wear.


5'8" 494299E 494277

6' 496099E 496077

6'6" 496699E 496677

7' 497099E 497077

8' 498099E 498077

Friction Buckle and Carabiner Friction Buckle

new

Length Model

5'8" 334299E

6' 336099E

6'6" 336699E

7' 337099E

8' 338099E

convenTional PoSiTioning STRaPS

6 - Ply Neoprene Impregnated Positioning Straps

Woven Nylon Positioning Straps

Leather with Woven Nylon Center Neoprene SuperStrapSuperStrap is made from 6 ply neoprene nylon with red warning core and features the patent pending WebGrab

for easy adjustment, with no holes to find or run out of like conventional straps. Order Model 33709E for a SuperStrap

with a Linkless snap on the WebGrab.


Posi

tioni

ng st

raPs

NEVER DEFEAT THE LOCK MECHANISM ON ANY LOCKING SNAP HOOK - It could result in a serious injury or death.• Always inspect equipment prior to each use. Check to make sure all lockers on hardware are in proper working condition• When attaching the positioning strap to the body belt, always look to ensure you are attached to the dee ring.• Never use a positioning strap if red is exposed.• Never use an all leather positioning strap.• If repositioning, immediately recheck snap hook engagement.• Never hook snap hook to snap hook or back on to itself.• Never hook multiple snap hooks to a single dee ring.• Never attach a non-locking snap hook to a dee ring with an exterior circle or a 'D' shaped dee ring.• Never allow the positioning strap to become twisted.

notes:

Exterior Circle Shaped Dee Ring

'D' ShapedDee Ring

Model 38189EExtension Strap 18" Provides extra length if po-sitioning strap in not long enough. Simply connect the snap to the dee ring and the snap to the body belt.

Model 99E An easy-to-use snap hook designed to operate like a non-locker. This snap offers the widest opening to ease attachment and detachment with the glove hand.

Model 77The hinge points make this locker easy to handle. This locker is easy to operate with a gloved hand. The bump & lock system will not easily malfunction.

PoSiTioning STRaP SaFeTy guideAccessories

Remember:

Buckingham offers an array of knives and tools to get the job done. The New ErgoBlade adds comfort to any knife application.


Knives & Tools

Knive

s & To

ols

Model 70951 Buckskinner Guard

Model 4051Buckskinner

Holster

Model 7095 - BuckskinnerThe Buckskinner is ideal for stripping cable in any position, has the ability to strip outer jackets on overhead or underground cables up to 2" in diameter and features finger grips and a convex edge that cuts the jacket not the conductor. Dual handle design to quickly, easily and safely strip wire with less fatigue. User can flip over to use with one hand, just like a regular hook knife to do end connections. Finger guards prevents user lacerations. Sharpens like any other edge. Add Suffix 'R' for an accessory ring.

Penetrate the blade into the insulation jacket at approximately thirty degrees. Place thumbs under the cable, applying pressure against the bottom of the cable as the knife cuts the jacket. Pull with straightened arms once the sharpened edge is on the conductor, leaning back and easing the knife toward you to strip the insulation jacket.

Buckingham knives are well accepted for their durable blades. The blade stays sharp, and when sharpening is needed, the honing stone can put a sharp edge on it in no time.

Accessory Ring

Without Accessory

Ring

Blunt Point

Notched Blade

Notched & Blunt

Point

Wood Handle

7080 70801 70802 70803 70804

1 1/4" Dia Yellow Handle

7086 70861 70862 70863 70864

1 1/8" Dia Red Handle

7089 70891 70892 70893 70894

Cushioned Handle

7090 70901 70902 70903 70904

7088 - 6" length with Comfortable Rubber Grip, High quality Steel Blade

ChoiCe!

Buckskinner - 3 P's for Stripping Cable

new

Buckingham is proud to introduce the new ErgoBlade lineman’s skinning knife. With a 1 ¼” diameter rubber handle, this knife fits comfortably in a gloved hand. The Round handle allows the user to create the proper cutting angle by rotating the knife within the hand instead of constantly, and repetitively, turning the wrist.

Model 7091 - Buck ErgoBlade

The 5 ¾” long handle extends beyond the palm of the hand reducing the force needed to secure the knife while skinning cable. The textured rubber handle increases grip while working in inclement weather.

• Model 70911 - Without Accessory Ring • Model 70912 - Blunt Point • Model 70913 - Notched Point• Model 70914 Notched & Blunt Point

Buck ergoBlade

Buckskinner

skinning Knives


Climber Accessories

Knives & Tools Knives & Tools

No Need for Elaborate Dies! Chase & Renew Battered & Rusted ThreadsJust one tool, with the standard set of die blades, handles SAE, USS, NPT or Metric type threads in any pitch from 6 to 28 threads per inch - right or left hand threads - in any outside diameter from 1/4" up to and including 12" diameters, depending on the specific model.

Model 6103 Model 6203 Model 62070 & 61060 Model 62040 & 6212

Outside diameter capacity of 1/4" to 1". Weighs 1 lb.

Outside diameter capac-ity of 1/4" to 1". Maximum handle swing of 3" for work in closely confined places. For such applications as cylinder head studs, 'U' bolts, wheel lugs, etc. Weighs 1 1/4 lbs.

62070 - Outside diam-eter capacity of 4" to 6". Has plain guide die blade which allows dies to pass over keyways and milled flats on threaded parts. Weighs 4 1/2 lbs.

61060 - Outside diameter capacity of 1 3/4" to 4". Same general design as Model 62070. Weighs 3 1/4 lbs.

62040 - Outside diameter capacity of 1" to 2 9/16". Same general design as Model 62070. Weighs 2 3/4 lbs.

Model 6212 - Outside diameter capacity of 6" to 12". Weighs 10 lbs.

Model 7058JIncludes

• 7058 Pouch• 7088 Knife

• 7075 Scissors • 2" x 7 1/2"

Model 7059 - Tool Pouch

Designed to hold scissors, knife and

can wrench.(Tools not included)

Model 7075•Stainless steel •1 7/8" cut •Less fatigue •Ice tempered •Notched & serrated blades

Model 7058CKIncludes:

• 7058 Pouch • 7088 Knife

• 7085 Scissors

Model 4089Knife Sheath

Model 7085•Tempered •1 7/8" cut

•Plated forged steel •Notched and serrated blades

Thread Restorers

scissors & AccessoriesMore Pouches Available - see Pouches & Holsters section


Knives & Tools

Knive

s & To

ols

Model 6150 - Strand and Wire DispenserA new design with strength where it is needed. Raise the pivoted swing-away arm, drop in the coil of strand, lower the arm and you are ready to cut the bands and feed strand. No loose parts to drop and lose, no unneeded metal bands with this sturdy tool. Handles full coils with ease while storing partially used ones safely. A time and labor saver.

Available in Two Sizes:Model 6150 - 6"D x 30"W; 10 lbs.Model 61501 - 8"D x 36"W; 12 lbs.

Arm swings to drop in guide wire and arm locks with wing nut.

The Staple Stick allows for added dexterity and accuracy, especially when wearing rubber gloves. It also prevents the user from dropping staples or having them fly into the road or the user’s face. Approximately two loaded staple sticks service a standard distribution pole. The overall dimensions = 7/8" x 3/4" x 14 1/4" and the diameter of hole to hang stick = 1/2".

To Use: Hold the stick with staple over the ground wire, hammer top of staple to get started, pull staple stick away and set staple.

6400 - Cushioned Handle

Model 6400 - Staple PullerAids in easy removal of staples installed over ground wire moulding. Welded bridge straddles the molding so removal is accomplished without damage.

Model - 574L• Holds 10 staples• Slots 1/8" W x 1" L

Model - 574• Holds 12 staples• Slots 1/8" W x 3/4" L

Hang the Staple Stick on the belt while climbing.

staple stick

strand & Wire Dispenser

staple Puller


Climber Accessories

Knives & Tools Knives & Tools

Model 6160 - Ground Rod Driver (with no moving parts)Rugged manual unit designed for one man to sink ground rods using the weight of the tool as the driving force. The permanently attached weight avoids finger crushing hazards. The dual-ended unit permits efficient use to start driving with "long" end, finish with "short" end. Fits over 5/8" ground rod. Overall length 6 feet (180 cm), weight 36 lbs. (16 kg). Inside diameter fits 5/8" rod.

Model 6142 - Manhole Cover HookThis forged and heat treated hook is bent at just the right angle for easy lifting of vault and manhole covers. 26" (66 cm) long, weight 2 lbs, 4 oz. (1 kg).

Model 7071 - Goat WrenchMade from alloy steel to withstand hard usage. The jaws are designed so that a nut, bolt or pipe is drawn further into the throat as pressure is applied. Weighs 2 lbs.

Model 4559 Model 4558 Model 4559 & 4558 Wheel ChocksBuckingham wheel chocks grip the surface and the tire for a positive lock. The interior of wheel chocks have a void in the center to allow easy handling. Solid rubber chocks are available upon request.Model 4559 - Ribbed 10" x 8" x 6" (25 x 20 x 15cm), Weight 8.5 lbs (4 kg)Model 4558 - Smooth 10" x 8" x 5.5" (25 x 20 x 14cm), Weight 7 lbs. (3 kg)

Goat Wrench

Wheel Chocks

Manhole Cover Hook

Ground Rod Driver


Knive

s & To

ols notes:

Buckingham manufactures Guards and Scabbards to fit many different saws. All are made with high quality materials and are built to last.Photo Courtesy of ArborMaster® Training

Guar

ds &

scab

bard

s


Guards & scabbards

Saw ScabbardModel 6226C - BeltingModel 6226 - LeatherFits curved blade hand pruning saws with a 26" blade.• Overall Length 30" (78cm)• Pocket Depth 26" (66cm)

Saw ScabbardModel 6222C - BeltingModel 6222 - LeatherFits curved blade hand pruning saws with 22" and 24" blades.• Overall Length 26" (66cm) • Pocket Depth 21" (53cm)

Dual Saw ScabbardModel 6223C - BeltingModel 6223 - LeatherLarge pocket is designed for curved blade pruning saws with up to a 24" blade. Small pocket fits curved blade pruning saws with up to a 16" blade.Large Pocket:• Overall Length 26" (66cm) • Pocket Depth 21" (53cm) Small Pocket:• Overall Length 17" (43cm) • Pocket Depth 16" (41cm)

Pole Saw ScabbardModel 60156C - BeltingFits Fanno blade F1-17S.• Overall Length 16" (41cm)• Pocket Depth 16" (41cm)• Wide 4" (10cm)

Pole Saw ScabbardModel 65156C - BeltingFits Fanno blades #16 and #17 as well as Mundo pruning saws.• Overall Length 16" (41cm)• Pocket Depth 16" (41cm)• Wide 4" (10cm)

Straight Blade ScabbardModel 6016C - BeltingModel 6016 - LeatherFits straight blade hand pruning saws with up to a 16" blade.• Overall Length 19 1/2" (49cm)

• Pocket Depth 14 1/2" (37cm)

Buckingham's line of pruning saw scabbards are made from the highest quality top grain leather or rubberized belting material. They feature a 1/2" nylon washer and double thick leather spacers on the tooth side to ease inserting and removing the saw from the scabbard. A 1 1/8" steel ring is attached to the back, 3" down from the top, to suspend scabbard and saw closer to the user.

Note: Clean out openings on the side and bottom to prevent buildup of saw chips and dust in the bottom of the scabbard.

saw scabbards


Guards & scabbards

Guards & scabbards

Straight Saw ScabbardModel 6208C BeltingModel 6208 LeatherDesigned to be used with pruning saws with a 22" to 26" blade length.• Overall Length 26" (66cm)• Pocket Depth 19 1/2" (50cm)

Saw ScabbardModel 6515CP BeltingModel 6515P LeatherDesigned to hold curved blade hand pruning saws with a 16" blade. A leather pruner pouch is included to hold hand pruners.• Overall Length 3 1/2" x 19 3/4" 9cm x 50cm)• Pocket Depth 3" x 15" (8cm x 38cm)• Pouch 2 1/2" x 5 3/4" (5cm x 12 cm)

Model 6221C - BeltingModel 6221 - Leather• Overall Length 29" (74cm)• Pocket Depth 23" (58cm)

Chainsaw ScabbardModel 60212C - BeltingModel 60212 - LeatherPrevents damage to chain and other equipment. For use with bar lengths from 12" to 14". • Overall Length 12 3/4" (32cm) • Pocket Depth 12" (30cm)

Chainsaw ScabbardModel 6022C - BeltingModel 6022 - LeatherPrevents damage to chain and other equipment. For use with bar lengths from 16" to 20".• Overall Length 18 1/4" (46cm)• Pocket Depth 17" (45cm)

Hydraulic Chainsaw ScabbardModel 6020C - BeltingModel 6020 - LeatherHydraulic Chainsaw Scabbard• Overall Length 15" (38cm)• Width 3 1/4" (8cm)• Pocket 14 1/2" (37cm)

Manual Pruner Guard (Large)Model 6019 - LeatherModel 6019C - BeltingFor pruners with 1 1/2" cutting capacity. 4 1/2" x 6 3/4"(11cm x 17cm)

Single Edge Axe CoverModel 6030 - LeatherModel 6030C - Belting4" x 9 1/2" (10cm x 24cm)Blade end depth 5 1/2" (14cm)

Hydraulic Pruner GuardModel 6031 - LeatherModel 6031C - Belting• Overall 7 1/2" x 7 1/2" (19cm x 19 cm)• Pocket 6 3/4" x 6 3/4" (17cm x 17cm)

Bow Saw Blade GuardModel 6225-21 - LeatherSpecify length when ordering.Model 6225-21 Fits 21" saw bladeModel 6225-24 Fits 24" saw bladeModel 6225-30 Fits 30" saw blade

Brush Axe GuardModel 6217 - LeatherModel 6217C - Belting• Overall Depth 18" (45cm)• Pocket Depth 12" (30.5cm)• Width 6 1/2" (16.5cm)

Hydraulic Circle Saw GuardModel 62005 - LeatherModel 62005C - BeltingFits circle saws with 9" blades.

Double Edge Axe CoverModel 60299C - BeltingModel 60299 - Leather5 3/4" x 11 1/2"(15cm x 29cm)

Manual Pruner Guard (Small)Model 6017 - LeatherModel 6017C - BeltingPruners with 1" cutting capacity.3 3/4" x 4 1/2" (10cm x 11cm)

Single Edge Axe CoverModel 6029 - LeatherModel 6029C - Belting3" (8cm) x 5" (13cm)

Saw ScabbardModel 6515C - BeltingModel 6515 - LeatherDesigned to be used with curved blade hand pruning saws with up to a 16" blade.• Overall Length 3 1/2" x 19 3/4" (9cm x 50cm)• Pocket Depth 3" x 15" (8cm x 38cm)

saw scabbards

Miscellaneous saw scabbards


Guar

ds &

scab

bard

s

Notes:

Buckingham Canvas & Fiberglass products are Buck Tough and made from high quality materials to provide our customers with years of service.


Canv

as &

Fibe

rgla

ss Buckingham has developed a line of canvas, coated vinyl , mesh and fiberglass products to accommodate and protect tools and equipment for linemen, arborists and industrial users. Our objective is to manufacture them of high quality materials to provide our customers a product that will provide years of service.

Contact us for custom logos and artwork of all your canvas products

Adder Description Adder Description Adder DescriptionG6 Gold Tuff Duck

H1 Hard Body (Mainly Oval Buckets)

K PVC Bumper Bar to level while Suspended (Canvas Buckets)

L Less Oval Bucket Hooks

L1 No Inside Pockets (Buckets Only)

L2 No Elastic Socket Holders (P/N 41333 & 45333)

M1 Maroon TNX

M2 Magnetic Strip

O 1000 D Neon Orange

O1 Orange TNX (Vinyl Coated Polyester)

O2 Pumpkin Orange Cordura

O3 7 oz. Blaze Orange PVC Fabric

P Outside Pocket (4569 Series)

P1 Purple Cordura

P2 Neon Pink Cordura

P3 Black Mesh Outside Closure w/ Hook and loop Closure

P4 Padded Bag

P5 One Clear Vinyl Pocket

P6 Purple Tuff Duck

P7 Two Outside Pockets

R1 Red Magna Tuff

R2 Red Tuff Duck

R3 Red TNX 18oz. (Vinyl Coated Polyester)

R4 Red # 8 Canvas

R5 Rubber Bottom

R6 Red Mesh

S Adjustable Should Strap w/ Pad

S1 Bronze 4958 Swivel Snap

S2 Two Attachment Snaps

S3 Z-711 1" Strap

S4 1/4" Spliced Polypropylene Rope

S5 Three Attachment Snaps

S6 Adjustable Should Straps (Backpack Style)

S7 Built-In Stiffener

S9 3/4" Web with Snap & Dee Attachment Straps

T Oval Bucket add 2" to Height

T1 Oval Bucket Cover

T2 Add 10" of height to bucket

T3 Drawstring Closure

V Hook and loop Closure

W1 Wheel/Handle Mechanism

W2 All Terrain Wheel Assembly

W3 All Terrain Wheel Assembly w/ Fixed Axel

Y Yellow TNX 180 oz. (Vinyl Coated Polyester)

Y1 Yellow TNX 22 oz. (Vinyl Coated Polyester)

Y2 Yellow Cordura

Y3 Yellow Canvas

Y4 Yellow Canvas TNX 14 oz.

Y5 Yellow Canvas # 4

1 Hard Bottom (4569 Series Only)

B1 Blue Tuff Duck

B2 Black Canvas

B3 Black TNX (Vinyl Coated Polyester)

B4 Black Magna Tuff

B5 Blue TNX (Vinyl Coated Polyester)

B6 Blue Magna Tuff

B7 PVC Coated Black Tuff Duck

B8 Black Mesh

B9 Blue Nylon (70 Denier)

B12 Blue Mesh

B13 Black 1680 Basket Weave Nylon

B14 40 oz. Black Coated Vinyl

C Oval Bucket Nylon Handles

C1 Tri-Suspension System (Canvas Only)

C4 # 4 Canvas

C5 #10 Natural Canvas

C6 Camouflage (300/600 Denier)

C7 Camouflage (1000 Denier)

C8 #8 Natural Canvas

D1 3/4" Steel D-Ring in Center

G1 Green Mesh

G2 Green TNX (Vinyl Coated Polyester)

G3 Green Canvas

G4 Neon Green Cordura

G5 Kelly Green Cordura

Custom Logos & Artwork Available

CAnvAs OptiOns


Canvas & Fiberglass

Model 4545 Aerial Basket CoverThis 18oz. vinyl coated nylon cover holds snugly on standard one-man buckets with a heavy sewn in bungee cord and snap to secure to the bucket. The secure grommet hole may be used to install tie line or for hang-up loop. Fits a 29" square bucket.Order Model 4548 for a larger aerial basket cover to fit two man baskets. Fits up to 50" x 62" basket.

Model 45150 - Line Hose Bag• Measures 12"dia x 48" length• Made of heavy weight canvas• 3/8" polypropylene handle• Molded 12" bottom with drain holes• Solid PVC ring• Available in yellow or orange coated nylon, add Y for yellow or O1 for orange to end of model number• Also available with snap, add S1 to end of model numberModel 45151 - for bag measuring 12" dia. x 60" length

Hose bags are used for numerous purposes such as hoisting materials up and down poles or hot stick "caddy" for multiple sticks on a pole or aerial basket.

Model 451509S1Line Hose Bag• Measures 9" dia x 48" high. • PVC ring in top• Bronze swivel snap• Plastic bottom

Model 45158S1-44XL Line Hose BagAn extra large sized Line Hose Bag. • 18" diameter x 44" high is large enough to store line hose or other miscellaneous equipment• Includes a PVC ring in top, bronze swivel snap and hard bottom

Model 45152• Measures 6"W x 72"L• Made of 18oz. yellow coated nylon• Heavy duty carry handle• Variable lengths available• Also available in orange coated nylon, add O1 to end of model numberModel 45153 6" x 84"Model 45154 6" x 130"Model 45155 8" x 84"Model 45156 6" x 102"Model 45157 6" x 66"

Fiberglass insert

Snap Closure

Carry Handle

Model 45147Y• Measures 9" W x 9" D x 32" H• Features a hard bottom for added support• Suspends on the basket using 2 standard bucket hooks (Not Included).• Hook and loop closure designed to keep weather out• Manufactured with heavy duty vinyl coated nylon. • Includes 2 brass grommet drain holes in bottom.

Model 45455 Aerial Basket CoverFeatures a fiberglass pyramid shaped insert. Measures 29" x 29" to fit various buckets. Increases water drainage. Outer cover same as 4545.

Aerial Bucket Covers Also Available in: Yellow (Suffix Y) Black (Suffix B3)

For Fiberglass insert only. order Model 454551.

new

Aerial Bucket Covers

Line Hose Bags

Hot stick Bags telescopic Hotstick Bag

AeriAL ACCessOries


Canv

as &

Fibe

rgla

ss

All Buckingham Aprons are designed to provide years of service using heavy vinyl coated nylon or heavy canvas duck. Aerial Aprons feature pockets that are sewn through two layers of vinyl coated nylon plus one layer of heavy canvas and feature grommet holes for drainage. Two large 3/4" grommets reinforced with PVC rods suspend apron from the bucket using Buckingham PVC or polymer hooks.

Model 4500YM2(Hooks not included)Same as 4500Y but features a Magnetic Strip to allow the lineman to store loose hardware and easily access it when required.

Model 4045Aerial Tool Apron(Hooks not included)• Measures 26" H x 4" W x 28" L

Model 4044Aerial Tool Apron(Hooks not included)• Measures 29" H x 4" W x 24" L

Model 4500YAerial Tool Apron(Tools & Hooks not included)• Measures 23 7/8"L x 4"W x 21 3/4"H• Sewn in stiffener• PVC pipe for auger bit holder• 11 Socket pockets with grommet drain holes• 2 Nut and bolt bags• 2 Pocket Holster• Hammer Loop

Model 4040Heavy Canvas Tool Apron(Hooks not included)• Measures 18"L x 4"W x 10 1/2"H• Built in stiffener• 3 Pockets with 3 straps, 2 double pockets, and one large pocket

Model 4048Heavy Canvas Tool ApronMounts on door panel to hold miscellaneous small parts. • Overall 17 1/2"W x 28"L• Pockets–8 each measuring 8"W x 6 3/4"Deep• 4 PVC rods to maintain rigidity• Comes with bungee cord hanger

Model 4041Heavy Canvas Tool Apron (Hooks not included)• Overall 18"L x 4"W x 19 1/2"H• 8 Tool Pockets, one large pocket and a knife snap• Sewn in stiffener• Rivet reinforcements

Model 4042Heavy Canvas Tool Apron (Hooks not included)• Overall 18"L x 4"W x 10"H• Two pockets measuring 6"x8"• PVC Rods to support apron and pockets• Rivet reinforcements

AeriAL ACCessOriesAerial tool Aprons


Canvas & Fiberglass

PVC hooks are formed from PVC Rod. These hooks are economical and offer a wide variety of styles.

Model 5134 S-Hook 3/4" stock (each)

Model 2405 - Polymer HookA strong polymer hook that features a 1/2" tapered end allowing the user to hang up to four rubber blankets from an aerial basket without ripping the eyelets. Fits up to a 3" wide bucket lip.

Model 5358• Aerial Basket fits 3" lip •5/8" stock (pair)

Model 5058• Aerial Basket • 5/8" stock (pair)

Model 5034 • Aerial Basket • 3/4" stock (pair)

Model 5175 • Cross Arm Hook • 3/4" stock (each)

Buckingham nylon, polymer and PVC hooks fit a wide range of aerial buckets and serve many applications.

Polymer hooks are molded from a mixture of plastics and nylon that give them high breaking strength and excellent cold resistance.

new

Model 2401-3 - Polymer HookMade from yellow model 11/16" O.D. polyment, this hook fits 3" Bucket Lips. Hook maintains its strength and flexibility through temperature extremes.

Model 2401 - Polymer HookMade from yellow model 11/16" O.D. polyment, this hook fits 2 1/4" Bucket Lips. Hook maintains its strength and flexibility through temperature extremes. Sold in pairs.

Model 2403 - Nylon HookThe 2403 hook is made of 100% nylon and is virtually indestructible if used in normal conditions. Hook stretches horizontally without breaking at 1,000 lbs and retains their physical properties up to 200o F (+93.3° C) and as low as -40o F (-4.4°). Fits 3" Bucket Lip. 5/8" stock. Sold in pairs.

Model 5434 • Aerial Basket fits 4 1/2" lip• 3/4" stock (pair)

AeriAL ACCessOry HOOks

polymer Hooks

nylon Hooks

pvC Hooks


Canv

as &

Fibe

rgla

ss

Model 4595M2The best built nut and bolt bag designed for many small parts that can be easily inserted and removed. Measuring 3" W x 9" H x 9" L , it is bigger than most bags. There is a plastic liner on the bottom of the bag to help keep the bag open and makes picking up small parts easier. A 2 1/8" long magnet can be used to stow metal hardware for easy access. A 2 1/2"x 3 1/2" outside pocket can be used for storage. The extra wide gusset makes it easy to insert a gloved hand to remove parts. This bag is built BuckTough - wear points have double thick canvas.

Buckingham Canvas Nut & Bolt Bags are made from top quality, heavy cotton duck. Some nut & bolt bags are made of durable 6oz. leather. All bags have reinforced tops, drain holes and attachment straps.

Models:4570: 10" deep x 9" wide. U-shaped with no bottom corners to trap small parts.4570B2: A 4570 in black canvas.4570M2: With magnetic strip to allow the lineman to store loose hardware and easily access it when required.4573: 10" deep x 9" wide. Same as 4570 but with reinforced vinyl bottom.

4571: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4").45701: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4") and 1" friction buckle on straps.45100: 9" deep x 9" wide.4574: 9" deep x 9" wide. With rigid vinyl liner to keep pouch open.

Model 45703C4S9An Equipment Storage Bag with a drawstring top. A bag specially designed to keep miscellaneous parts and tools securely stored while working aloft. Snap/Dee attachment straps. Heavy weight canvas. Measures 3"W x 10"H x 9"L.

Model 45702C4S9Similar to model shown at left. Except elastic retainer prevents equipment from falling out while allowing easy access into the bag.

4570 4570B2 45744570M2 45100

Model 45911M2Finally, a canvas bag built with the lineman in mind. An inside pocket for organizing spare parts, web loops strategically positioned to store cotter pins during work, a powerful magnet, and a reinforced bottom to prevent premature wear makes this bag a must for any line worker. Measures 3" W x 8"H x 9"L.

new

nut & BOLt BAgs

Canvas


Canvas & Fiberglass

• Reinforced top keeps bag open• Heavy weight canvas for added durability• An optional hook and loop closure is available to keep contents securely stored

• Available with a standard tunnel loop or dee ring/attachment straps• Measures 10" H x 4" W x 10" L • Also available in 16" high

Model 45772 Nut/Bolt Bag w/ hook and loop ClosureModel 45772-16 Nut/Bolt Bag w/ hook and loop Closure 16" high

45771S9 Nut/Bolt Bag45771S9-16 Nut/Bolt Bag 16" high45772S9 Nut/Bolt Bag w/ hook and loop Closure45772S9-16 Nut/Bolt Bag w/hook and loop Closure 16" high

Model 5302Made of heavy leather for long service and hard usage. This bag is considered a “must” by most linemen. With one of these spacious bags on your belt it is possible to carry loose tools, and connectors and remove with gloved hand. Measures 9"H x 3 1/2"W x 7"L

Model 52994-BRA leather nut and bolt bag with leather thongs for attachment to a body belt. Snap closure helps contain parts. Measures 9"H x 3"W x 8.5"L. Available in black (BL), brown (BR) or burgundy (BU). Brown is standard.

Above bags are available in black (BL), brown (BR) or burgundy (BU). Brown is standard. Add appropriate suffix to the model number for requested color.

Model 52993-BRSame construction as 5299 except with 3 inside pockets to store wrenches or screwdrivers. Measures 10"H x 3"W x 9"L

Model 5288Same construction as 5299 except has a tunnel piece to slip on belt. Measures 10"H x 3"W x 9"L.

Model 5299-BRA strong pliable lightweight leather, ideal for maintenance and repair work. Measures 10"H x 3"W x 9"L .

A line of Tool, Nut and Bolts bags manufactured with the tower worker in mind.

Model 45771 Nut/Bolt BagModel 45771-16 Nut/Bolt Bag 16" high

nut & BOLt BAgsLeather

tower Worker nut & Bolt Bags

tunnel Loop Attachment snap / Dee Attachment


Canv

as &

Fibe

rgla

ss

All tool bags have the following construction:• Heavy canvas or vinyl coated nylon• 1/4" double tempered Masonite bottom• Six brass studs on bottom • Heavy duty nylon web handles sewn around the bag• Heavy steel top frame enclosed in canvas• Industrial weight nickel plated snaps on pockets

• Heavy vinyl coated nylon bottom reinforcement • Top grain reinforced leather straps are double riveted with leather and weather sealed washers• Available in a variety of colors [see material chart] • Any tool bag can have a shoulder strap by adding suffix 'S' • Any tool bag 11" wide by 24" long can be made with hard rubber bottom by adding the suffix R5

Model 45333R5SY• Dimensions 15"H x11"W x 24"L• Two inch molded rubber lip protects against water getting into bag• Heavy gauge rubber for superior strength• The rigidity of the formed rubber bottom allows bag to maintain its shape• Double stitched body to the rubber bottom• Cleats on bottom are designed to prevent water from being absorbed

Model 45300C• Dimensions 15"H x 7"W x 20"L• Made of heavy duty canvas• One inside pocket for small parts• Leather handles and straps• Order Model 45300C-24 for a 24" long bag (15"H x 7"W x 20"L)

Model 45334• Dimensions 12"H x 9"W x 16"L• Web handles• Leather snap closure• Reinforced bottom

Model 506 - Small Tool Bag • Dimensions 14” L x 9” H x 6” W• Heavy canvas for maximum durability• Heavy duty zipper closure• Tempered Masonite bottom• 1” web carry handles

Model 45333S• Dimensions 17"H x 11"W x 24"L • Made of heavy duty canvas• Adjustable and removable nylon shoulder strap with leather pad for comfort• Two side pockets for storing protectors, sockets and miscellaneous tools (one pocket has elastic socket holders.• Pocket bottoms are double lined for added wear• Hook and loop closure rain flap lined with TNX for added protection

Model 45332• Dimensions 17"H x 11"W x 24"L• Made of heavy duty canvas• One large outside pocket for storage of protectors or tools

Model 45331Y• Dimensions 17"H x 11"W 24"L• Made of heavy duty yellow coated nylon• Completely weather proof with fold over storm flap• Roomy inside pocket for storage of small parts

Model 506P7-14 - Small Tool Bag • Heavy canvas for maximum durability• Two large outside pocket with snap fasteners• Heavy duty zipper closure• Tempered Masonite bottom• 1” web carry handles• Measures 14” L x 9” H x 6” W

tOOL BAgsBuckingham tool Bags are Built to Last!


Canvas & Fiberglass

Model 41333O1R5W1Rubber Bottom Tool Bag with Wheels• Ideal for transporting equipment between trucks or to remote work sites.• Heavy-duty rubber wheels designed for years of use.

Model 41333R5SY• Hard rubber bottom equipment bag with 2" molded rubber lip to prevent water seeping into the bottom of the bag.• Heavy gauge rubber bottom is double stitched to the bag and is very durable, even in cold weather

Model 41333• An economically priced equipment bag with features and quality of bags costing much more. • Two large (20" x 5" x 11") outside pockets can be secured with three snap fasteners•Vinyl coated nylon rain flap and heavy-duty leather straps and buckle to secure bag closed

Model 41333C7R5W3Camouflage Canvas Bag with Rubber Bottom• 6" diameter heavy duty rubber wheels• Ideal for transporting equipment in rough terrain• Push button handle retracts when not in use

Model 4371B14 - Rope Pail Haul BagThe Rope Pail constructed of 44oz. Vinyl was designed for the Arborist, Tower Worker, or Rope Access Technician, who has to haul their rope around and needs to pack it quickly and conveniently while keeping pace on the vertical job site. Features includes: • Measures 6" x 11" oval x 19"H• Fits 200' of 1/2" climbing line• Ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points• Metal buckles and snaps, that will far out last plastic components• 1 large grommet on underside used as a drain hole, or to run rope out of bottom of bag• MOLLE webbing exterior and interior of bag for organization and racking gear.

Model 4370B14 - Gear Bucket Haul BagThe Buck Gear Bucket constructed of 44oz. Vinyl with 4300 cubic inches of internal storage was built to withstand the most abusive environments and treatment. Features include: • Measures 13"Dia x 27"H• An ergonomic back pad that easily removes for travel or storage• Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far outlast plastic components• 2 large grommets on underside used for drain holes, or to run rope out of bottom• MOLLE webbing on exterior and interior of bag for organizing and racking gear• Fits 200' of rope

new

Option W3All terrain wheel

assembly with fixed axel

new

tOOL BAgs

• Push button handle retractswhen not in use.• Wheels can be manufactured with any 11"W x 24"L rubber bottom tool bag by adding Suffix ‘W1’. IE. Model 4133301R5SW1.


Canv

as &

Fibe

rgla

ss

Model 45299Bag has hundreds or uses.• Dimensions 17"L x 24"H x 6"W• Constructed of heavy canvas• Reinforced bottom for durability.• Double carry handles for added strength

Model 45402R-36An extra large Duffel Bag designed to carry miscellaneous equipment. •Dimensions 12" Dia x 36" L

Model 45297• Double ply bottom• Grommet drain hole• 1 3/4" web handle/shoulder strap

Model 50037BY - Tripod Bag•Dimensions 56"L x 22"W Tapered• Made from heavy duty yellow coated nylon• Strong nylon handles surround the bag for added carrying strength• Snap closures along entire length• Fits 7' tripod• Available in orange coated nylon, add suffix O1• Model 50039BY fits 9' tripod

Model 5000BDimensions 21"L x 11"H x 10"W• Made from heavy duty yellow coated nylon• Ideal for carrying or storing winches, safety gear, etc.• Nylon zipper closure won't corrode or bind• Strong nylon handles 1,000 lb. break strength• Available in orange coated nylon, add suffix O1 to end of model number

Model 45521• Dimensions 13" H x 11" W x 22" L• Web handles• 1 outside pocket• Inside pocket• Leather strap closure on bag and pockets• For shoulder strap add suffix 'S'.

Model 45400R2-18• Dimensions 18"L x 9.5"H x 9.5"W•Ideal for carrying personal fall protection equipment• Made from heavy weight red water resistant polyester•Strong nylon handles 1,000 lb. break strength•Nylon zipper closure that won’t corrode or bind•Available in blue, add suffix B to end of model numberModel 45400-12 for 12"Model 45400-24 for 24"

utiLity BAgsyou'll Find Many uses for these popular Bags!


Canvas & Fiberglass

Tool Buckets have many unique features that make them EXTRA TOUGH! Features include:

11215 Also Available:Model 11216 - without pocketModel 11217 - without snapModel 11218 - without pocket and snap

Note: Buckets may be made of yellow TNX material by adding suffix 'Y' to the model number i.e. 1215Y.

Model 11227 (The Big One)• Measures 16"Dia x 23"H• Heavy canvas construction• 8" x 10" inside pocket• Polypropylene rope• Reinforced leather bottom

Model 309C• Measures 9"Dia x 11 1/2"H• Heavy canvas construction• Steel top ring• Polypropylene rope with 4958 brass swivel snap• Inside glove strap• Molded rubber bottom

Model 1215•Measures 12"Dia x 15"H• Heavy canvas construction• Solid continuous PVC ring in top• Polypropylene rope with 4958 brass swivel snap• 8" x 8" inside pocket• Molded rubber bottom

• Polypropylene Rope - Won't rot. Spliced for added durability.• Solid PVC Ring - Top ring is continuous solid PVC material, stronger than typical PVC rod.• Bottoms - Made from high impact thermoplastic rubber or leather for durability under the toughest working conditions.

• Leather Side Supports - Reinforcement at rope holes to prevent wear of canvas.• Nylon Thread - Heavy durable thread that will not rot.• Unique Construction - Heavy Canvas construction that is folded over outside stitches to protect thread from abrasion and then stitched again on outside for added strength.

Model 1231 - Without Pockets Model 1230 - With Pockets• Measures 5"Dia x 7"H• Can be used for connectors, nuts and other small items• Can be set on desk or hung in vehicle for other uses• Great for safety awards

Also Available:• Model 1215TS - with drawstring top ideal for keeping parts from coming out during travel.• Model 1216 - without pocket• Model 1216P - with 15 inside pockets• Model 1217 - without snap• Model 1218 - without pocket and snap

Model 1231

Model 1215TS

Model 1230

Model 11215• Measures 12"Dia x 15"H• Heavy canvas construction• Solid continuous PVC ring in top• Polypropylene rope with 4958 brass swivel snap• 8" x 8" inside pocket• Leather bottom reinforced with Masonite

tOOL / nOse BAgstotal Quality for the inside Out

Mini tool Buckets


Canv

as &

Fibe

rgla

ss

Model 312C• Measures 12"Dia at top, 9"Dia at bottom x 13"H• 12" steel ring in top• Inside glove strap• Polypropylene rope with 4958 brass swivel snap• Molded rubber bottom• Heavy canvas

Model 4958 Light Duty Handline & Tool Bucket Swivel Snap (not for human support)• 11/16" (17mm) Eye• 4 3/8" (111mm) Length• 9/16" (14mm) Opening

Model 1219 Heavy Canvas Body rubber bottom without swivel snapModel 11219 Heavy Canvas Body leather bottomModel 11229 Heavy Canvas Body rubber bottom with swivel snapModel 11239 Heavy Canvas Body leather bottom with swivel snapBuckets Measure 12"Dia x 22"H

Model 1220• Measures 12"Dia at top, 9"Dia at bottom x 13"H• PVC molded top ring• Polypropylene rope with 4958 brass swivel snap• Molded rubber bottom• Heavy canvas

Model 311• Measures 12"Dia at top, 9"Dia at bottom x 14"H• PVC molded top ring• Polypropylene rope with 4958 brass swivel snap• Molded rubber bottom• Heavy canvas

Model 121514• PVC ring• 14 outside pockets• Heavy canvas• Rubber bottom• 12" Dia x 12" H

Model 1213 Canvas Body with rubber bottom without swivel snapModel 11213 Canvas Body with rubber bottom with swivel snapModel 11223 Canvas Body with leather bottomModel 11233 Canvas Body with leather bottom with swivel snapBuckets Measure 9" Dia x 12"H

Model 11213

• 4 outside pockets• Heavy canvas• Molded rubber bottom

Model 1228S8• Measures 9" Dia x 12" H • Loops accommodate up to 20 Amp tool cartridge shells• An extra large grommet can be used to suspend off a bucket hook• Includes a bronze swivel snap

Canvas buckets that feature:• Polypropylene rope with 4985 brass swivel snap• 2 inside pockets•PVC molded top ring

Model 11229

tOOL / nOse BuCketsMiscellaneous tool Buckets

tapered tool Buckets

splicer tool Buckets


Canvas & Fiberglass

All oval buckets are available with Hard Body style, add H1 to end of model number, example 12165H1. Oval buckets can have the bumper feature by adding the suffix letter "K" to the model number.

Buckingham oval buckets are designed to accommodate your needs. They are built to last and provide the user with enough variety of configurations to meet every need. If we don't have one that meets your needs we can build one that does.

Model 12163• Measures 14"L x 10"H x 6 1/2"W• Heavy canvas for maximum durability• 13 outside tool pockets• Nylon web carry handles• Durable molded bottom with drain holes• Molded top ring• Hooks not included

Model 12165L• Dimensions 14"L x 10"H x 6 1/2"W• Heavy canvas for maximum durability• 14 outside tool pockets• Nylon web carry handles• Large 13/16" grommet hole• Durable molded bottom with drain holes• Molded top ring• Hooks not included

Model 12166• Measures 14"L x 6 1/2" W• Heavy canvas for maximum durability• 8 inside tool pockets• Large 13/16" grommet hole• Durable molded bottom with drain holes• Molded top ring• Two 5334 PVC hooks included• Order Model 12166L for bucket without PVC hooks• Order Model 121656 for bucket with 15 outside pockets

Model 12161• Dimensions 14" L x 10"H x 6 1/2"W• Heavy canvas for maximum durability• 15 inside tool pockets• Built inside stiffeners so bucket won’t collapse• Large 13/16" grommet holes• Molded top ring• Two 5334 3/4" bucket hook by 3" width included• Durable molded bottom with drain holes• Order Model 12161L for bucket without PVC hooksOrder Model 12161M2 for magnetic to store loose hardware for easy accessibility.

Model 12162• Dimensions 14" L x 10"H x 6 1/2"W• Heavy canvas for maximum durability• 15 inside tool pockets• 2 polypropylene ropes connected to a heavy snap for suspension• Durable molded bottom with drain holes• Molded top ring• Hooks not included

Model 12164• Heavy canvas for maximum durability• 12 shell loops on front• Inside pocket 8" x 5"• Large 13/16" grommet hole• Durable molded bottom with drain holes• Molded top ring• Two 5334 PVC hooks included•Order Model 121614 for bucket without PVC hooks

CAnvAs BuCketsOval Buckets


Canv

as &

Fibe

rgla

ss

Model 121615CH1L• 14 Outside tool pockets• 15 inside pockets• Canvas exterior with hard body• No bucket hooks• Molded top ring• Heavy canvas• Nylon web handles• Hooks not included

Model 12167• Heavy canvas for maximum durability• 6 inside pockets• Large 13/16" grommet holes• Molded bottom• Two 5334 PVC hooks included• Order Model 12167L for bucket without hooks Order Model 12167H1 for bucket constructed with canvas exterior and a plastic liner.

Model 12168• Heavy canvas for maximum durability• 9 inside tool pockets• 1 inside tool pouch• Molded rubber bottom• Two 5334 PVC hooks included• Order Model 12168L for bucket without hooks

All oval buckets are available with Hard Body style, add H1 to end of model number, example 12167H1. Any oval bucket can be made with the bumper feature by adding suffix "K" to the model number.

Model 12168K• Measures 14"L x 19"H x 6 1/2"W• Same as 12168 with bumper added• Includes twp 5334 PVC hooks.

Model 1216241• Measures 14” L x 10” H x 6 1/2”W• Heavy canvas for maximum durability• 26 inside, and 15 outside pockets• Molded top ring• Durable molded bottom with drain holes• Manila suspension rope with 4958 brass swivel snap• Hooks not included

Model 1216OS1H1L - Street Light Bulb Bag: • Measures 23"L x 14"H x 12.5"W• Designed to carry oversized bulbs aloft in an aerial basket• Solid luan bottom and hard body construction help keep bag rigid• Grommet in bottom provides adequate drainage• Hooks not included

Model 12169H1K• Measures 14"L x 10"H x 6 1/2"W• Heavy canvas for maximum durability• 12 inside pockets• PVC bumper to keep bucket from tilting on bucket• Molded rubber bottom• Two 5358 5/8" x 3" wide bucket hooks included• Without hooks order Model 12169H1KL

CAnvAs BuCketsOval Buckets


Canvas & Fiberglass

All glove bags can be made of orange or yellow vinyl by adding O1 (for orange) or Y (for yellow) to end of model number.

Reinforced Snap For Hanging

455805Y - Tapered Sides• Measures 14"L x 8"W x 6" (top) tapers to 3" (bottom) dia• Yellow TNX (drop suffix 'Y' for canvas)• Double stitched rolled edges• Grommet hole in bottom for ventilation• Back snap with leather holder for hanging• Gusseted sides

Model 418 - Glove, Sleeve & Goggle Bag• Glove pocket 18" x 4 1/2"• Sleeve pocket 20" x 3"• Goggle pouch 7" x 4"• Heavy duty canvas• Nickel plated steel snap fasteners• Back snap with leather holder for hanging

Model 455400 - Straight Sides• Measures 14"L x 9"W x 3 1/2"Dia• Heavy duty canvas• Nickel plated steel snap fasteners• Double stitch rolled edges• Grommet hole in bottom for ventilation• Back snap with leather holder for hanging• Straight sided

Cotton DuckModel Glove Pocket Glove Sleeve519 17 1/2" x 3 1/2" 19" x 3 1/2"521 17" x 4" 20" x 4"

Cotton DuckModel Straight Sides455300 For 12" (31cm) gloves455400 For 14" (36cm) gloves455401 For 18" (46cm) gloves

Yellow TNXModel Tapered Sides455805 For 14" (36cm) gloves455895 For 18" (46cm) gloves

Model 521 - Glove and Sleeve Bag• Heavy duty canvas• Hook and loop closure• Back snap with leather holder for hanging• Grommet holes in bottom for ventilation•Double stitched rolled edges

Model 455200H1 - "Hard Body" Glove Bag• Measures 7"L x 20"H x 4"W• Heavy duty canvas• Rigid polyethylene on sides to prevent collapsing• Grommet holes in bottom for ventilation• Hook and loop closure• Back snap with leather holder for hanging

gLOve BAgs


Canv

as &

Fibe

rgla

ss

Model 4585 - Sleeve Roll-Up• Nylon reinforced vinyl• Hook and loop button fastening• Sized to hold X-long sleeves flat without folding• Dee ring to hang up• 32 1/2" x 21"

Model 4587 - Blanket Roll Up• Measures 3' x 6"• Heavy duty canvas• Webbing tie straps• Sewn web carry handle

Model 45148 & 45149 - Hoist Bag• Sturdy canvas bags, with a #5258 hook to fit truck racks, provide a clean place to store nylon strap hoists, keeping them off the truck floor and extending the life of the hoist straps.•Model 45148 fits the Eaton Little Mule #300 and #344. Also fits Lug All #2 and #3. 38" long.• Model 45149 fits Lug All #4 and A.B. Chance 1 ton strap hoist. 42" long.• Available in yellow ('Y') or orange ('O') add appropriate suffix to model number

Model 5231 - Sleeve Bag• Measures 30"L x 3"W• Fits up to 29" sleeves• Front Pocket accommodates up to 18" gloves• A hook and loop retainer prevents sleeves from falling to the bottom • Also features a glove liner dust pouch• All pockets have a hook and loop closure

Model 4588 - Blanket Bag• Heavy yellow vinyl• Nylon zipper closure won’t rust or corrode• 1 3/4" nylon carry handles• 6 3/4" x 40 1/2"

Model 528 - Sleeve Bag• Heavy duty canvas• Holds 29" sleeves• Tapered to support sleeves when hung on belt• Quick release snap on back• Snap closure top

trADitiOnAL sLeeve BAgs & sLeeve rOLL ups


Canvas & Fiberglass

Model 45775• A belt mounted tool bag that measures 14" high x 9" wide x 5" deep.• Constructed from heavy duty canvas with steel rivets for reinforcements at all stress points. • An 8"W x 5"H x 1"D inside pocket with two fasteners to keep parts securely stowed. • Features 8 inside tool loops and 2 inside tool/bull pin holders.• Tunnel piece accepts up to a 3" belt strap. • Reinforced top lip that keeps opening rigid

Model 4560 - Throw Line Bag • Measures 8" x 12"•Made of tough water resistant polyester fabric• Top drawstring closure• Used for carrying or storing throw line • Holds up to 100 ft.• Drawstring closure fold out for easy access to throw line

Model 4469B1-150 Back Pack Equipment BagMakes it easy to carry a rescue line, tools or miscellaneous equipment aloft.•Measures 12"Dia x 16"H• Outside mesh pockets with hook and loop closures • Padded shoulder straps add to comfort• A drawstring top keeps equipment securely stored.

Model 5081R3A bag specially designed to

store your 15KV Jumpers.• Measure 5"H x 20"L x 3"Deep• Has an inside pocket with hook and loop closure.• Durable coated nylon material and 2 ply bottom for years of service.• A nylon web carry handle and hook and loop closure

• Overall dimensions are 25" long x 28" high x 5" deep.

Model 4569R2-150 - Rope Bag• Made of heavy water resistant cordura fabric • Top drawstring to keep water out and rope or tools in

• Sturdy when in use yet collapsible for storage when not used• Holds 150 ft. of 1/2" rope• Drawstring closure folds outward to give easy access

Model 502 Jumper Cable Bag• Measures 5" x 13" x 19"• Made of heavy duty canvas• Hook and loop top closures• 1" nylon carry handle• Available in TNX, add suffix 'Y' yellow, and 'O' for orange

Model 526 Tower Beacon Carry Bag

Allows the user to transport bulbs aloft.• Four individual compartments insure glass bulbs will not come in contact with each other.• A snap allows the bag to be attached to a harness. • A 1/8" steel ring on the bottom allows multiple bags to be attached.• A hook and loop closure keeps cover

securely closed.• Measures 14" H x 8" D x 8" W• Individual pockets measuring 14" H x 4" D x 4" W.

Model 4569R2-120 for 120' of rope (12"x13")Model 4569R2-225 for 225' of rope (12"x22")Add 'P' after 4569 for an outside pocket

speCiALty CAnvAs iteMs


Canv

as &

Fibe

rgla

ss

Buckingham offers a wide variety of grounding, danger and line marker flags. All are constructed of a durable high visibility vinyl coated nylon for years of service. Custom screen printing, sizes and designs are available.

Model 8454O3VHi-visibility Orange GROUNDS Flag With two reflective strips on front and back

for easy visibility at night. Hook and loop straps for a secure attachment. Wire attachment for hot line clamp on top and PVC stiffener on bottom. Includes truck/radio # and service location lettering along the top. Measures 17 1/2" H x 16 1/2" W.To order without truck/radio # and service location lettering order Model 8452O3V.

Model 8451G7P5VHi-visibility green DANGER Flag With two reflective strips for easy visibility

at night. Hook and loop strap for a secure attachment. Features a 6 1/2" x 6 1/2" clear vinyl pocket on back-side for crew, truck or company information. PVC stiffener on top. Measures 18 1/2" H x 16 1/2" W. To order without clear vinyl pocket and snap closure attachment instead order Model 8451G7S.

Model 8453O1-45 Hi-visibility orange WORKER ON LINE Marker With two reflective strips for easy visibility when working at night. 1 1/2" wide hook and loop is used to securely wrap around pole. 9 1/2" long x 7" wide clear vinyl pocket for truck, crew or company information.

Measures 45" L x 7" H. Order Model 8453O1-50 for 50"

Model 8455G7-45Hi-visibility green LINE BEING PATROLLED Marker With two reflective strips for easy viewing at night. 1 1/2" wide hook and loop is used to securely wrap around pole. 9" L x 6" W clear vinyl pocket for truck, crew

or company information. Measures 45" L x 6" H. Order Model 8455G7-50 for 50".

First Aid Blood Stopper PouchThe New First Aid Blood Stopper Pouch quickly attaches to any Buckingham saddle or body belt and contains one large blood stopper to control bleeding until the victim can be administered First Aid on the ground. Secures to any body support using either an attachment snap or 3/4" steel dee ring. Measures 3 1/2" W X 5 1/2" H

Model 694 - Rescue Buck• Height 5'6"• Ideal for pole top rescue training, retrieval training and fall protection testing• Fill with tire chips or ground up rubber to get desired training weight• Loop on back for lifting• Loops on front for holding body belt• Separate compartments for actual lifelike movementModel 694F1 - Rubber Pellets• Buck mix–55 lbs. of rubber pelletsModel 38523-M body belt is recommended for the Rescue Buck

Model 5Y2-M - Arm ProtectorsDesigned to prevent splinters in the forearm during apprentice lineman training Made from 1000 denier cordura for durability. Measures 16" long.

Model 4600S3Y First Aid Blood Stopper Pouch with Attachment Snap

Model 4600D1Y First Aid Blood Stopper Pouch with 3/4" Steel Dee Ring

Model 4600NY First Aid Blood Stopper Pouch with 1 3/4" Nylon Belt Loop

1 Large Blood Stopper is Included with Each Kit

speCiALty sAFety prODuCts

Warning Flags & Markers


Canvas & Fiberglass

45400G1-18

45400G1-9 4561G1See Through Storage & Rope Mesh BagsThese See Through Mesh Bags make it easy to locate carabiners and small accessories. No longer will you have to open every bag to find the right equipment. Mesh material also allows sufficient airflow through the bag, which aids in drying wet gear. Available in many different sizes and styles. See below for ordering information:45400G1-9 5" Diameter X 9" Long45400G1-12 9 1/2" Diameter X 12" Long45400G1-18 9 1/2" Diameter X 18" Long45400G1-24 9 1/2" Diameter X 24" Long45400G1-30 9 1/2" Diameter X 30" Long4560G1 8" Diameter X 12" High4561G1 8" Diameter X 10" High

Model 45500G1Mesh Harness Tote Bag• Measures 13"L x 14"H• Made of heavy coated nylon mesh to let the harness breathe• Hook and loop closure• Grommet reinforced hole for hanging• Allows air circulation

Private Label Logos Available

We'll give your logo center stage on your products.

Generate team spirit and company recognition with

your logo.

Keeping your name in front of your customers

and employees is just good business.

Model 4540MB - Mesh BagThe new mesh bag is designed to contain a full body harness or other soft goods when laundering. Can also be used to store and carry miscellaneous equipment. The mesh design allows air to flow through reducing the possibility of mold and mildew. A heavy duty draw string closure keeps equipment securely inside. Measures 8"W x 14"H

Model 4581Ideal to hang on a step ladder to accommodate miscellaneous parts. A wire frame with a removable heat resistant PVC coated material.• Measures 9" D x7"W x 11" L• Metal frame to hang on ladder rung• Heat resistant material• Bag removes from frame

MesH BAgs


Canv

as &

Fibe

rgla

ss

Model 4555 - Battery Tool Holder

Overall Dimension – 14" x 4" x 14 1/2"Pocket Dimension – 6 1/2" x 4" x 14 1/2"

Model 4036B4 Greenlee & Fairmont Tool HolderMade to fit Greenlee and Fairmont battery powered, slim profile crimping tools.• Made of 1000 Denier Cordura® for maximum durability. • Nylon strap with hook and loop closure keeps tool securely stowed when not in use. • Snap and Dee ring attachment strap can be used to secure to a tool belt or suspend from an aerial basket hook.• A nylon carry strap, Model 4036S, can be purchased separately and easily attaches to the holster to be used for working on a ladder or underground.

Holster4036B4

Front Back

Model 4035YCompression Tool Holder Two Pocket carry bag designed to carry an inline tool , spare batteries and dies• Measures 22"H x 10"W• Both pockets have a hook and loop closure that can be fastened out of the way for easy access to the pockets•Tool pocket measures 18"L x 8"W• Accessory pocket measures 8"L x 7"W• Padded bottom in tool pocket for added protection• Adjustable shoulder strap• Grommets for mounting to an aerial basket• Durable vinyl coated nylon

Model 4037Compression Tool Holder• Heavy orange vinyl• Heavy neoprene nylon bottom to prevent premature wear• Grommet hole in bottom for drainage• Grommet eyes in top for suspension from bucket• 3 pockets for compression tools and/or a combination of bolt cutters• Overall dimensions 10"x26" Pocket 1 15" Pocket 2 18" Pocket 3 22"

Model 40351B3 - Inline Hydraulic Crimper Carry Bag Designed to safely carry & store an inline crimper, charger, batteries and dies.• Measures 25 1/2"H x 11"W x 7"D •Tool pocket measures 22"L x 10"W with a hook and loop closure to keep the tool securely stowed• Charger/battery pocket, with hook and loop closure, measures 9 1/2" x 8 3/4"W• Die pocket measures 7 1/2"L x 7"W and features an elastic closure for easy access. • Adjustable shoulder strap• Grommets for mounting to an aerial basket• Durable vinyl coated nylon

HyDrAuLiC tOOL & BAttery stOrAge BAgsHydraulic tool Carry Bags

Manual Compression tool Bags

Strap4036S


Canvas & Fiberglass

Model 4510• 9"W x 11"D x 18"L• PVC hooks (#5334) included• May be hung inside or outside basket• B1 Bumper available

Model 4512• 6"W x 8"D x 11.5"L• Built on hanger fits 3 3/4" basket lip• Ideal for trouble lantern• B2 Bumper is available

Model 4511• 6.5"W x 19.25"D x 18.4"L• Built on hanger and bumper to keep level• Reinforced lip around edge for added strength• Built-in bumper keeps tray level

Model 4510M2With magnetic strip to allow the lineman to store loose hardware and easily access it when required.

Bumpers are available to keep fiberglass tool trays and aprons level. Note the styles available:Model B1 - Half Circle BumperMode B2 - L-Shape Bumper

B1

Model 4509• 8.25"W x 8"D x 19"L• Built on hanger fits a 2 5/8" basket lip• Reinforced lip around tray• Built-in bumper keeps tray level

B2

FiBergLAss ACCessOriestool trays


Canv

as &

Fibe

rgla

ss

Model 45006The 45006 is the top of the line tool board. It can hold numerous tools without having to carry them and it keeps them organized.• 20"W x 18"L• Removable fluorescent light ideal to illuminate tools and bucket• Light interchanges with small pocket to hold test set• Numerous pockets to hold all tools needed• Auger bit holder• B1 Bumper is available• Reinforced 4-ply neoprene nylon behind the leather pouches for added strength• Order Model 400094 for Light Replacement Order• Light illustrated not available The 45006 is the top of the line tool board. It can hold numerous tools without having to carry them and it keeps them organized.

Now available with holes instead of built in hanger. Holes align with Model 4510 tool tray. Ideal for hanging tool tray on outside of a basket and the apron inside the basket.

Model 45004 - Model 4500 with Model 4226 four pocket holster replaces the 3

pocket holster.

Model 4501 - A Bare board to allow for a custom designed board layout. Measures

20" W x 18" L

Pouches

Model 4505• 20" W x 20 1/2" L• Auger bit holder• Wrench and

hammer loops• Canvas nut and

bolt bag• B1 Bumper is

available

Model 4500• 20" W x 18" L• 3 pocket holster• Wrench and hammer loops• Canvas nut and bolt bag• B1 Bumper is available

Model 45003• 20" W x 18" L• 4 pocket holster• Wrench and hammer loops• Knife pouch• 5299 leather nut and bolt bag

FiBergLAss ACCessOries

tool Aprons


Canvas & Fiberglass

The economical long reach bucket tool holder offers the user a secure method to hold long reach tools horizontally on the basket lip and vertically inside the basket. It does not allow the tool holder clip to rotate 360 degrees nor allow the user to physically move the clip from horizontal to vertical position as the 4590 model. The non-rotating version does provide the user a permanent vertical and/or horizontal mount. This unit provides multiple options to accommodate the user's needs as shown below:

Mounting Brackets

Model 45894589 4589

45891

4589 45891

A combination of 4589/45891 allows user to hold one saw horizontal and two vertical.

Mount 4589 and 45891 to hold multiple tools - two vertical and one horizontal.

Mount two 4589's to hold one tool horizontal.

Two of the 4589 mounts allows user to hold one single stick.

Model 45301R - Square BoomSelect a Long Reach Boom Tool Holder:Square Boom45301R - Handle45311R - Chainsaw45321R - Pruner

Model 4530R - Handle Holder• Round boom-mount with ratchet closure• Clip spring accepts handle end of hydraulic tool• Redesigned spring clips–Now more durable• Foam pad to prevent slippage on boomRound Boom4530R - Handle4531R - Chainsaw4532R - Pruner

Model 4532R - Pruner Holder• Round boom-mount with ratchet• Bonnet fit hydraulic pruner• Foam pad back to prevent slippageNote: For longer base order 4531RC

Model 4531R Chainsaw Holder• Accepts chainsaw head• Ratchet closure to attach to boom• Foam back to prevent slippage

Model 45311RC• Extra long to shield boom

Hydraulic Boom Tool HoldersRound Boom

Square Boom

Handle End 4530R 45301RReplacement

Clip 45302** 45302**

Chainsaw 4531R* 45311R*Replacement

Pocket 45312** 453112**

Pruner 4532R* 45321R*Replacement

Pocket 45322** 453212**

Circular Saw NA 453311R*Extra long base available to prevent damage to boom when inserting and removing tool. Add suffix 'C' (i.e. 4531RC)**All replacement parts come with sticky backed foam and fasteners

FiBergLAss ACCessOriesnon-rotating reach Bucket tool Holder

Long reach Hydraulic Boom tool Holders


Canv

as &

Fibe

rgla

ss

A bumper is available to keep holders level. See page 83.

Model 4503• 4.5" W x 10" L• Equipped with Streamlight base• Built in hanger to fit over 3 3/4" basket lip• Light sold separately• B2 Bumper is available

Model 4503BOrder without Streamlight charger. 4503B comes with 4 barrel fasteners to mount your own recharger.

Model 4514 - Chainsaw Scabbard• Designed to hold most chainsaws• 8.5" W x 33" L• Mounts outside or inside• Springs prevent falling off if mounted outside• Reinforced sides• B1 Bumper is availableReplacement pocket, order Model 45141.

Model 4514W - Chainsaw ScabbardWith reinforced pocket for added durability of the chainsaw pocket.

Model 4522M• Measures 9.5" W x 13" L• Built-in hanger to fit over 3 3/4" basket lip• Accepts most impact wrenches Stanley - IW05, IW08, IW09 and IW04 Fairmont - 6500, 6505, 6505A and 8508• B2 Bumper is available

Model 45502 - Fiberglass Bucket StepThe Fiberglass Bucket Step provides the user ease in and out of the bucket. This unit will enable the user to step out of the bucket to other elevated work surfaces where work practices allow. Two 4" wide steps with a nonskid surface and leveling bumper make climbing safer and easier.Dimensions 12"W x 27 1/2"LBuilt-in bumper keeps step level.

Model 4550 - Fiberglass Step• Reinforced to support 300 lbs.• Ease stepping into and out of the basket• Small enough not to interfere when in basket – 24" long• B1 Bumper is available

FiBergLAss ACCessOries

Don't learn safety by accident. Climb Safe with Buckingham.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

Fall P

rote

ctio

n

88

Harness Sizing Matrix

Economy Harnesses

HarnESSES

Our standard design Economy Harnesses are made from Type 13 (7000 lbs. nylon) nylon webbing with orange upper and black lower sections and meet all applicable ANSI and/or ASTM standards. Order by adding size S, M, L, X, to part number (except for universal harnesses). Non-standard sizes available upon request.

Model U64A23H6E00‘H’ Style Full Body Harness. • Interlocking buckles at the leg positions for height and leg strap length adjustment.• Fixed position interlocking chest strap buckle.• Steel Dee ring dorsal attachment.• Universal Size - One size fits most.

Model 6381700‘H’ Style Full Body Harness.No Metal, Light Weight• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Reinforced web loop dorsal attachment used to half hitch a shock absorbing lanyard.• Step in leg straps.• No height or leg strap adjustment.

Model 63936E00T2‘H’ Style Full Body Harness• Interlocking buckles at the leg positions for height and leg strap length adjustment.• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Interlocking leg strap buckles.• Steel Dee ring dorsal attachment.• Standard friction buckle for vertical adjustment.

S = Small; M = Medium; L = Large, X = Extra Large; XX = 2X; XXX = 3X.

Indicates meets ASTM F887 Electric Arc Performance Requirements.

Buckingham Manufacturing offers a full array of standard design full body harnesses to be used in fall arrest, work positioning, suspension, retrieval and rappelling applications. Standard design harnesses are returnable and can be ordered in sizes S, M, L, & X. Buckingham Manufacturing allows you to design a harness from our matrix or to specify a non-standard size. We’ll manufacture the harness to accommodate your needs. Non standard harnesses and sizes are not returnable.


Fall Protection

89

Basic Harnesses

HarnESSESOur standard design Basic Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. Harnesses meet all applicable ANSI and/or ASTM standards. Order by adding S, M, L, X, to part number. Non-standard sizes available upon request.


603B3700-Web Dorsal Loop [shown]or 603B3600-Steel Dorsal Dee

‘X’ Style Full Body Harness• Interlocking torso & leg strap buckles with leather chafes.• Web loop or steel dee dorsal attachment.• Reinforced web front loop that can be used for rescue or rope/cable grab.• Chest strap sewn above web loop to prevent spreading.• Made from Type 13 nylon webbing with orange upper & black lower sections.

603E3700R3-Web Dorsal Loop [shown]or 603E3600R3-Steel Dorsal Dee

‘X’ Style Full Body Harness • Interlocking torso & leg strap buckles.• Web loop or steel dee dorsal attachment.• Fully adjustable interlocking torso buckles for height adjustment.• Reinforced web front loop that can be used for rescue or rope/cable grab.• Made from Type 10 (R3) nylon webbing with red upper and black lower sections.• No chafes behind buckles.

6383700-Web Dorsal Loop [shown]or 6383600-Steel Dorsal Dee

‘H’ style full body harness• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Interlocking leg strap buckles with leather chafes.• Web loop or steel dee dorsal attachment.• Made from Type 13 nylon webbing with orange upper & black lower sections.• No vertical adjustment because the harness has no metal above the waist.

6483600-Steel Dorsal Dee [shown]or 6483700-Web Dorsal Loop

‘H’ Style Full Body Harness• Interlocking chest strap buckle with leather chafe.• Interlocking leg strap buckles with leather chafes.• Steel dee or web loop dorsal attachment.• Made from Type 13 nylon webbing with orange upper & black lower sections.• No vertical adjustment.

6493500D1R3 Steel Chest Buckle [shown]or 6393500D1R3 Hook & Loop Chest Strap

‘H’ Style Full Body Harness• Interlocking chest strap buckle or hook and loop chest strap.• 24" [61cm] dorsal pigtail with small dee ring.• Standard friction buckle for vertical height adjustment.• Made from Type 10 nylon (R3) webbing with red upper and black lower sections.• No chafes behind buckles.• Interlocking leg strap buckles.

‘H’ Style Full Body Harness• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Interlocking leg strap buckles with leather chafes.• Web loop or steel dee dorsal attachment.• Standard friction buckle for height adjustment.• Made from Type 13 nylon webbing with orange upper & black lower sections.

6393700-Web Dorsal Loop [shown]or 6393600-Steel Dorsal Dee


Fall P

rote

ctio

n

90

HarnESSES

Basic Harnesses

High End HarnessesOur standard design High End Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. They feature the Buckingham patented split tongue Quick Connect Buckle for ease of use and adjustability and they meet all applicable ANSI, ASTM & OSHA standards. Order by adding size S, M, L, X, to part number. Non-standard sizes available upon request.

6493600K-Steel Dorsal Dee [shown]or 6493700K-Web Dorsal Loop

Kevlar® ‘H’ Style Full Body Harness• Interlocking chest strap & leg strap buckles, all with leather chafes.• Steel dee or web loop dorsal attachment.• Friction buckles mounted on vertical shoulder strap for height adjustment.• Made from Kevlar® with yellow upper and black lower sections.

6494600-Steel Chest Buckle [shown]or 6394600-Hook & Loop Chest Strap

‘H’ style full body harness• Interlocking chest strap buckle or hook and loop chest strap.• Grommet & Tongue Buckle leg straps.• Steel dee dorsal attachment.• Friction buckles mounted on vertical shoulder strap for height adjustment.• Made from Type 13 nylon webbing with orange upper & black lower sections.

6493700R3-Web Dorsal Loop [shown]or 6493600R3-Steel Dorsal Dee

‘H’ Style Full Body Harness• Interlocking chest and leg strap buckles - no chafes behind buckles.• Web loop or steel dee dorsal attachment.• Friction buckles mounted on vertical shoulder strap for height adjustment.• Made from Type 10 (R3) nylon webbing with red upper and black lower sections.

6398C700-Web Dorsal Loop [shown]or 6398C600-Steel Dorsal Dee

‘H’ style full body H arness• Minimal amount of metal above the waist.• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Leg straps with the patented Quick Connect Buckles and leather chafes.• Web loop or steel dee dorsal attachment.• Friction buckles mounted on vertical shoulder strap for height adjustment.

68D98C600-Steel Dorsal Dee [shown]or 68D98C700-Web Dorsal Loop

‘H’ Style Full Body Harness• Patented Quick Connect Buckles with leather chafes on the chest and leg straps.• Steel dee or web loop dorsal attachment.• Friction buckles mounted on vertical shoulder strap for height adjustment.

603S8C700-Web Dorsal Loop [shown]or 603S8C600-Steel Dorsal Dee

‘X’ style full body harness• Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for height adjustment.• Web loop or steel dee dorsal attachment.• Reinforced web front loop that can be used for rescue or rope/cable grab.



Fall Protection

91

HarnESSES

BuckFit & BuckFit Fr Harnesses

The standard design Buckfit harnesses are uniquely constructed for the user’s safety, comfort and ease of use. The full body harness slips on like a vest [‘H’ style] or pullover [‘X’ style]. No more twisted loops of webbing to untangle before you start your day! They meet all applicable ANSI standards and our Buckfit FR Harnesses have a Kevlar® mesh shell that meets the ASTM F887 Electric Arc performance requirements. Order by adding size S, M, L, X, to part number. Non-standard sizes available upon request.


'X' Style Full Body Buckfit Harness: • Drilex® shell, shoulder and leg pads that is designed to wick moisture away from the user and add comfort• Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for adjustment• Web loop or steel dee dorsal attachment.• A reinforced web front loop can be used for rescue or with a rope/cable grab.• Made from Type 13 nylon webbing with silver upper and black lower sections.

603S8C700V9-Web Dorsal Loop [shown]or 603S8C600V9-Steel Dorsal Dee

'X' Style Full Body Buckfit FR Harness:• A Kevlar® mesh shell that is designed to “breathe”.• Foam padded shoulder and leg pads for added overall comfort.• Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for adjustment• Web loop or steel dee dorsal attachment.• Reinforced web front loop can be used for rescue or with a rope/cable grab.• Made from Type 13 nylon webbing with silver upper and black lower sections.

603S8C700K1-Web Dorsal Loop [shown]or 603S8C600K1-Steel Dorsal Dee

'H' Style Full Body Buckfit FR Harness:• A Kevlar® mesh shell that is designed to “breathe”.• Foam padded shoulder and leg pads for added overall comfort.• Hook and loop chest strap that meets ANSI Z359.1 requirement.• Patented Quick Connect Buckles with leather chafes on the leg straps.• 18" [45.7cm] dorsal pigtail with small dee ring to attach a 4 1/2' [1.37m] shock absorbing lanyard.• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black lower sections.

637G8C500CK1- FR w/ Dorsal Pigtail [shown]or 637G8C500CV9- Non FR w/ Dorsal Pigtail

637G8C700V9-Web Dorsal Loop [shown]or 637G8C600V9-Steel Dorsal Dee

637G8C700K1-Web Dorsal Loop [shown]or 637G8C600K1-Steel Dorsal Dee

'H' Style Full Body Buckfit FR Harness:• A mesh shell that is designed to “breathe”.• FR foam padded shoulder and leg pads that add to overall comfort.• Patented Quick Connect Buckles with leather chafes on the chest and leg straps.• Steel dee or web loop dorsal attachment.• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black lower sections.

68D7G8C600K1-Steel Dorsal Dee [shown]or 68D7G8C700K1-Web Dorsal Loop

'H' Style Full Body Buckfit Harness:• A Drilex® shell that is designed to wick moisture away from the user and padded Drilex® shoulder and leg pads for added overall comfort.• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Patented Quick Connect Buckles with leather chafes on the leg straps.• Web loop or steel dee dorsal attachment.• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black lower sections.

'H' Style Full Body Buckfit FR Harness:• A Kevlar® mesh shell that is designed to “breathe”.• Foam padded shoulder and leg pads that add to overall comfort.• Hook and loop chest strap that meets ANSI Z359.1 requirements.• Patented Quick Connect Buckles with leather chafes on the leg straps.• Web loop or steel dee dorsal attachment.• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black lower sections.


Fall P

rote

ctio

n

92

HarnESSESBuckFit Harnesses Continued

Miscellaneous Harnesses

'H' Style Full Body Buckfit Harness• A Drilex® shell that is designed to wick moisture away from the user and padded Drilex® shoulder and leg pads for added overall comfort.• Patented Quick Connect Buckles with leather chafes on the chest and leg straps.• Steel dee or web loop dorsal attachment.• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black lower sections.

68D7G8C600V9-Steel Dorsal Dee [shown]or 68D7G8C700V9-Web Dorsal Loop

'X' Style Full Body Harness“X” style full body harness meets ASTM ARC performance test and ANSI Z359.1 requirements. Rather than have webbing cross to form an ‘X’, this harness has more of a ‘U’ shaped design that spreads the opening around the neck to eliminate the irritation of webbing against the neck. Harness features a nylon web loop at the sternum and dorsal attachment points, webbing and interlocking buckles to allow user to insert a body belt, patented quick connect buckles at the leg straps and front connection, and a 5000lb rated extra seat strap for use with the Buck-It restraint system.

603P8Q8 - Web Dorsal Dee

68D98C74C0K4 - Web Dorsal Loop'H' Style Full Body HarnessThe Buck Mini Back Pad harness offers comfort and ease in donning the harness. The unique shoulder pads are made from sateen fabric with fire resistant padding. Harness features back straps with male end aluminum interlocking buckles to connect to the Buck ErgoBelt, patented quick connect buckles at the chest strap and leg pads, vertical shoulder adjustment, and leather chafes behind the leg quick connect buckles for comfort and to reduce the potential of static charge. Harness features a 5000 lb rated nylon dorsal loop that eliminates metal and allows user to girth hitch their shock absorber (can be ordered with a dorsal dee).



Fall Protection

93

HarnESSESErgovation Harnesses

The Ergovation® 'H'-Style Harness accommodates dorsal fall arrest. It also has the ability to accommodate climbers utilizing Single Rope Technique (SRT) to access their work vertically. This 'H'-Style Harness is unmatched in comfort, durability and versatility. Features include:• ¼” closed cell foam padding for improved comfort and hygiene.• Pads are stitched to the harness webbing to prevent shifting and improve easy donning of harness.• Aluminum dee ring for decreased weight and increased comfort while aloft.• Plastic quick connect buckles to anchor and keep chest cam vertical and in tension while ascending.• Y2 friction buckles for quick and secure adjustment of webbing in front and in back.• Hook and loop chest retention strap for quick and easy donning of harness• By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the

climber is using, throughout the entire upper body. Rated to 310lbs.

The Ergovation® Y-Style Harness is a unique harness tailored specifically to users that require either dorsal or sternal fall arrest attachment. It also has the ability to accommodate individuals utilizing Single Rope Technique (SRT) to access their work vertically. This Y-Style Harness is unmatched in comfort, durability, and versatility. Features include:• ¼” closed cell foam padding for improved comfort and hygiene.• Pads are stitched to the harness webbing to prevent shifting and improve easy donning of harness.• Aluminum D-ring for decreased weight and increased comfort while aloft.• Y2 friction buckles for quick and secure adjustment of webbing in front and in back.• A one of a kind snap retention system to secure chest ascender to Y-Style Harness.• The only harness that accommodates both sternal and dorsal fall arrest, as well as a chest cam attachment for SRT access.• By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body. Rated to 310 lbs.

Climb comfortably with Buck! Your back will Thank You!

Model 16906H1 - The Ergovation® H-Style Harness(shown with optional batten seat Model 1368)

Model 16906H2 - The Ergovation® Y-Style Harness(shown with SRT Model WES)

Model WES - The Ergovation® Sigma Suspension SRT Attachment (shown above on 16906H1 & 16901H2)

The Ergovation® Sigma Suspension SRT attachment is a revolutionary design that accommodates users that want a ventral attachment for vertical work. Once attached to the harness, the SRT’s two loops are used to anchor life support connecting links. The SRT attachment consists of a 1.75” web loop to create the attachment to the waist belt and two 1” adjustment straps and buckles that attach to the leg straps. Because the 1” red straps adjust the position of a user’s chest cam, and the height of the SRT attachment, it can be adjusted to support the climber’s lower back while keeping the climber upright on the rope. This positioning increases vertical gain and maintains vertical efficiency.The SRT attachment of the Ergovation® harness can be rigged two ways: for full time use by users that require a ventral attachment all of the time or for part time use for users that only require a ventral attachment for a portion of their work. Rated to 310 lbs.


Fall P

rote

ctio

n

94

HarnESSESHarness Matrix

To order a harness to meet your specific needs, use the following procedure. Simply insert the digit noted to configure the harness you desire (note: harness always starts with a 6)

350 lb.

Rated *Harnesses configured from the matrix are non-returnable.**8C=Quick Connect Buckle


If prefix 'U' inserted universal fit. Only available with harness with upper body adjustment buckles.

X

6 HARNESS TYPECHEST STRAP ATTACHMENT

LEG STRAP ATTACHMENT

FALL ARREST ATTACHMENT

SHOULDER PADS

BODY BELT ATTACHMENT

0 = Used only with harness type 3

3 = Hook and Loop Chest Strap

4 = Interlocking Buckle

4B = Interlocking Buckle black powder coated

8D = Quick Connect Buckle w/ black belt chafes for vertical adjustment

3 = Cross-over design w/ perm. attach. chest strap located 3 3/4" above front 'X'. ApplicAble only to chest strAp AttAchment 0

3B = #3 with loop at cross on front of harness

3D = #3 without chest strap, with 1 3/4" nylon attach. pieces stitched across back shoulder straps directly below the chafe in back

3E = #3D with loop at cross on front of harness

3S = #3B w/ quick connect buckles

8C = Quick Connect Buckle w/ hook and loop for vertical adjustments

8E = Quick Connect Buckle w/ dee ring

7G = Spring loaded friction buckle on vertical shoulder straps

8 = Basic Harness no shoulder strap adjustment

9 = Basic harness with shoulder strap adjustment

9A = Basic harness. #9 with black coated shoulder strap hardware

1 = Step-in leg straps - no buckles

3 = Interlocking Buckle

3A = Interlocking Buckle (black powder coated)

4 = Grommets

8C = Quick Connect Buckle

5 = Permanently attached

5Q = Shock Absorber permanently attached

6 = Dee Ring (1069)

7 = Web loop

9 = Small shoulder dee ring

0 = None 0 = None

1 = Outside Mount 1" Plastic Buckles

4 = Body belt attached through means of loops attached to harness

4C = Straps with Interlock buckles to connect Buck Ergo Harness. Buck Ergo Only

1 = Permanent

2 = Replaceable

3 = Replaceable w/ 1" 4-ply nylon loop for snaphook and hook and loop to hold lanyard on shoulder (6JLV)

4 = Light Weight Permanent

8E/ = # 3 FR Style Pad

4Q = Body Belt Permanently attached


Fall Protection

95

HarnESSESHarness Matrix Options


A3 = 1½" diameter rappelling loops. Sewn to shoulder strap at 20° angle and encased in yellow tube wear piece. not AvAilAble on hArness type 8.

A2 = 3" length rappelling loops on vertical shoulder straps. only AvAilAble on hArness type 8.

A = 15" rappelling loop (seat section) - 1" yellow web with hook and loop back

A4 = 'A' rappelling loop with the addition of 3" wide elastic keeper.

C = 18" extension strap (1" yellow web) that terminates with a dee ring

C1 = Leather cover for adjustment buckles with 2" hook and loop.

C2 = 18" extension strap (1¾" orange web) terminating with a small dee ring.

C4 = 1¾" orange web cross piece to prevent fall arrest attachment from sliding down.

D1 = 24" extension strap (1" yellow web) terminating with dee ring

E = left side only E1 = right side only 1¾" diameter loop (1" 4-ply nylon) in hip area to attach snap hook. for both sides use ee

F = Work positioning dee rings attached to harness by green web, which goes around the back and connects to two dee rings.

G = 18" extension strap (1" yellow web) that terminates with ¾" diameter loop for carabiner.

G1 = 18" extension strap (1" yellow web) with a loop (approx. 3" dia.) to half hitch on a shock absorber.

G3 = 18" extension strap (1¾" orange web) with wear piece around 3½" diameter loop for attachment of shock absorber.

G4 = 18" extension strap (1¾" orange web) that terminates with a 1¾" diameter loop encased in yellow wear piece.

G6 = 18" extension strap (1¾" orange web) that terminates with a small dee ring attached in a 1¾" diameter loop encased in yellow tube wear piece.


Fall P

rote

ctio

n

96

HarnESSESHarness Matrix Options


H = Reflective material stAndArd grAy

H1 = 10" Reflective strips stitched to front and back shoulder straps. Hook and loop chest strap.

K1 = Kevlar mesh; meets ASTM F887 electric arc performance requirements.

N = 2" diameter loops on 1" black web stitched to both shoulder straps 5" above the hook and loop chest strap adjustment buckles.

N1 = Chafe loop attached to left shoulder strap and used to attach snap hook.

N8 = 1 ¼" diameter loop PVC black belting stitched to both shoulder straps.buckfit hArnesses only

P = Shoulder Dee Ring for retrieval

R3 = Type X red upper section, black lower section. No chafes under buckles.

T2 = Harness made without leg strap elastic bands and leather chafes and with 2" plastic slide buckles.

T3 = Harness made without leg strap leather chafe and with 2" plastic slide buckle.

T7 = 3" diameter loop with 1" yellow web with a yellow fluorescent reflective strip on each shoulder for retrieval.

T8 = 3" diameter loop with 1" yellow web with a yellow fluorescent reflective strip on the side of each hip.

T9 = Harness manufactured without leather chafes behind hardware but with elastic bands.

V9 = Cool Max padded shell and leg pads green with grAy type 13 webbing

Z12 = 5 labels inside leather cover with hook and loop wrap (wallet style)

K4 = FR Mini BuckFit style back pad.K3 = FR Mini BuckFit style back pad and leg pads


Fall Protection

97

SHOCk aBSOrBing LanYardS

What's Changed with Consensus Standards

How To Order

rule of Thumb

Buckingham Manufacturing offers four different styles of shock absorbing lanyards. Standard design shock absorbing lanyards are returnable and can be ordered in 4', 4 1/2' and 6' lengths. Buckingham Manufacturing also allows you to design a shock absorbing lanyard from our matrix, specifying connection options and lengths. We’ll manufacture the shock absorbing lanyard to accommodate your needs. Matrix designed shock absorbing lanyards are not considered standard design and are not returnable.

Harness Dorsal Attachment

Maximum Lanyard Length

Steel Dee Ring 6' (1.8 m)

Web Loop 6' (1.8 m)

18" Pigtail 4 1/2' (1.4 m)

24" Pigtail 4' (1.2 m)

nOT rECOMMEndEd TO USE a LOCking SnaP HOOk WiTH a FULL BOdY HarnESS dOrSaL WEB LOOP!When using a full body harness with a steel dee ring dorsal attachment, only use a shock

absorbing lanyard with a locking snap hook or a locking carabiner connector.

• ARC Test (40 cal) Requirement ASTM - To stamp ASTM must also meet ANSI Z359.13• ANSI Z359.12 - Requires a 3600lb Gate on snaps and carabiners• ANSI Z359.13 - Offers 2 Shock Absorbers: - 6' Length for a 6' drop, maximum deceleration 48", arresting force is less than 900 lbs. - 6' Length for a 12' drop, maximum deceleration 60", arresting force is less than 1350 lbs.

To get desired shock absorber please add correct suffix to the part number:

ASTM 40 cal (Must also meet ANSI Z359.13)

ANSI Z359.123600 lb. Gate

ANSI Z359.136' | 12' Suffix to add to Model Example Buck Yard

X X X S1X6 8VV116S1X6

X X X S1X12 8VV116S1X12

for Shock absorbing Lanyards

New Rule of Thumb Old Rule of Thumb

Note: The length of deployment on the shock absorber will vary depending on the anchor, length of fall, and the user’s weight. If connected to a solid anchor such as an I-Beam the user will experience a greater deployment distance. When the same person is connected to an anchor on the bucket truck and the boom is not straight up and down, the shock absorber may deploy very little due to the flex in the boom. If the boom is straight up and down the shock absorber will deploy a greater distance.


Fall P

rote

ctio

n

98

SHOCk aBSOrBing LanYardSBuckyard

BuckYard StretchThe Buckyard Stretch offers the same benefits as the Buckyard with the addition of elastic Bungee. This feature reduces a 6' lanyard to approximately 44" greatly reducing trip hazards while climbing in and out of an aerial basket. The Buckyard Stretch is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard Stretch, add the 'S1' suffix to the model number; e.g.: 84V716S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.


The Buckyard has the flexibility of a standard web or rope lanyard with the benefit of a reduced arresting force. The tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force to less than 900 lbs. The Buckyard is available in 4', 4 1/2' and 6' non-adjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard, add the 'S1' suffix to the model number; e.g.: 84V116S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

8VV116S1+Z84V114+Z

84V714.5+Z8VV714.5+Z

Indicates hardware meetsANSI Z359.12-2009


Fall Protection

99

SHOCk aBSOrBing LanYardSBuck arrest

Buck Stop

6VV114+Z64V114+Z

5VV114+Z54V114+Z

6VV126+Z

5VV126+Z

5VV116S1+Z

The Buck Stop features a 6" shock pack covered by clear shrink tube making inspection easy. When ordering an arc tested (Meets ASTM F887) Buck Stop, add the 'S1' suffix to the model #; e.g.: 54V116S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

The Buck Arrest features a 16" shock pack covered by a water resistant nylon tube that reduces the bulkiness of the pack on the back. When ordering an arc tested (Meets ASTM F887) Buck Arrest add the ‘S2’ suffix to the model number; eg: 64V114S2+Z. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.


Indicates hardware meetsANSI Z359.12-2009


Fall P

rote

ctio

n

100

dUaL, SPECiaLTY & TiE BaCk SHOCk aBSOrBing LanYardS

dual & Specialty Shock absorbing Lanyards

Work Positioning Lanyards & Straps

Model 9+N08K15A2M4Lightweight Work Positioning LanyardThis lightweight work positioning lanyard features a micro adjuster for ease of use. A double locking aluminum snap hook is used to keep the overall weight under 2 lbs. A protective sleeve is included to protect the rope from excessive wear. Overall length is 5’ [1.5m].

Buckingham Manufacturing offers a wide variety of dual and tie back shock absorbing lanyards for 100% fall protection while climbing and working on transmission towers, cell towers and steel structures. Suffix +Z indicates the hardware meets ANSI Z359.12-2009.

Model 546716RDR+Z Buck Stop Dual Lanyard Features two 3130 Locking Ladder Snaps that have a 2 1/2" gate opening. Red rescue loops facilitate the rescue of an injured worker.

Model 8+66716D+J+6W4 Dual Shock Absorbing Lanyard Features an aluminum double locking rope snap piggybacked with large auto locking carabiners so that users can tie off to step bolts.

Model 8+66716D+JW4Dual Shock Absorbing Lanyard Weighs in at just 3 lbs. and features lightweight aluminum hardware. The auto locking 2” offset gate and double locking aluminum snap help keep weight to a minimum. A stretch core automatically contracts lanyard length preventing it from becoming tangled when not in use and while climbing.

Model 7VV7A13B+4 - Rebar AssemblyFeatures polyester webbing and easy to use 1706 locking snaphooks. The locking rebar snap has a 2 1/4” gate opening. The 1” polyester webbing has a red warning center to indicate excessive wear or cuts, and is encased in a nylon tube to protect against abrasion (36” length). Please indicate desired length when ordering.

Model 5V+T7A16X6 - Buck Stop Tie Back LanyardThe Buck Stop Tie Back Shock Absorbing Lanyard features a specially designed snap hook making it safe and easy to ‘tie back’ to itself. Lanyard is made with 1” inch wide polyester web with a red warning center to alert the user of excessive wear and is protected by an outer web sleeve for added safety. A 17061 snap hook is used to attach to the users harness dorsal dee ring.

Model 546716RD+H+ZBuck Stop Dual Lanyard Features two 30342 Large Locking Rebar Hooks that have a 3 11/32" gate opening. Red rescue loops facilitate the rescue of an injured worker.

+T - N 3618 Tie Back Snap with 3600 lb. gate.

Indicates hardware meets ANSI Z359.12-2009 standard.


Fall Protection

101

LanYardSMatrix for Shock absorbing / Work Positioning Lanyards

Hardware Used with Lanyards

A B C D E F (Hardware for both Ends Except Items with (*) for End #2 Only) X XDECELERATOR/WORK POSITIONING

(Illustrated Model 64V126R)

5-BUCK STOP6-BUCK ARREST7-WORK POSITIONING LANYARD8-BUCK YARD

HARDWARE (END #1 ATTACHED TO USER)

0 = 3/4" eye forcarabiner

4 = StandardHalf-hitch loop

6 = 3" Nylon LoopduAl lAnyArds only

+4 = 2 1/4" lockingladder snap 30351 or when used w/ option +Z, a 30351 w/ 3600lb gateload

+6 = Aluminum Body Locking Rope Snap

+7 = 1709 RopeSnap or when used w/ option +Z, a1712 w/ 3600lb gateload

+J = 2" offsetcarabiner*

8 = 1704 Swivelsnap

A = Aluminum Carabiner Self-Locking 5005S3

D = 50051, 3600 lb. Gate Steel Carabiner

HARDWARE (END #2 ATTACHED TO ANCHOR)

M = PermanentlyAttached Loop

R = 2 1/2" LadderHook 3130 or when used w/ option +Z, a 31301 w/ 3600lb gateload

V = 1706 Snap or when used w/ option +Z, a 17061 w/ 3600lb gateload

Z = 1 3/4" LadderHook Model 3129*

+H = Model 30342Large LockingRebar Hook

+K = Model 1711Roto Snap

+N = Model 1710 Aluminum LockingSnap

+T = N 3618 Tie Back Snap 3600lb gateload

+W = 1714 Locking Rope Snap, 3600lb side and gate load

MATERIALWEB/ROPE

1 = 1" Yellowpolyester web; 5,6,7 Series Only

1 = 1 3/16" Green Nylon tube; 8 Series Only

3B = 5/8" Polyester3 Strand Rope

4 = 1/2" Multiline Rope (3 Strand)

4A = 5/8' Multiline Rope (3 Strand)

4B = 3/4" MultilineRope (3 Strand)

7 = Green Nylon Tube w/ elasticcore; 5,6 & 8Series Only

7A = #1 with nylon tube

8A = 1/2" BlueStreak Rope

8G = 5/8" DoubleBraid Rope

8K = 1/2" XTC 16 Strand Rope w/ Red Warning Core

FIXED ORADJUSTABLE

1 = Fixed

2 = Adjustable

OVERALL LENGTH

4 = 4'

4.5 = 4 1/2'

5 = 5'

6 = 6'

OPTIONS

D = Dual Lanyard

R = Rescue Loop

S1 = Shrink Tube Over Arc Flash Rated Label. Used on Arc Flash Approved Products.

S2 = Arc Flash Rated Cover for Buck Arrest

V = Hook and Loop Sewn at Anchor End of Lanyard

W = Leather WearGuard

W5 = Clear PlasticTube Wear Guard

X6 = Meets ANSI-Z359.13-09 for 6' FF

X12 = Meets ANSI-Z359.13-09 for 12' FF

+Z = Hardwaremeets Z359.12-09(3600 lbs gate)


1706 (Option V); Locking Rope Snap: 1" (25mm) eye, 15/16" opening, 6" (152mm) long. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 17061 Locking Rope Snap with a 3600 lb gate load

1706 31301

31301 (Option R); Large Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.5" (63.5mm) opening, 9 3/4" (248mm) length, 1 lb. 8 oz. weight. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 31301 Locking Ladder Snap with a 3600 lb gate load.

1712

1712 (Option +7); Locking Rope Snap [1" (25mm) eye (I.D.), 3/4" (19mm) opening, 6 1/8" (156mm) length, 10.2 oz. (290gm) weight. Min. tensile strength 5000 lbs. (22kn)] or, when using suffix +Z in part number, model 1712 Locking Rope Snap with a 3600 lb gate load.

30351 (Option +4); Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.5" (64mm) opening, 9.5" (241mm) length, 1 lb. 7 oz. weigh. Rated to 5000 lbs. (22kn) or when using suffix +Z in part number, Model 30351 Locking Rope Snap with a 3600 lb gate load.

30351

30342 (Option +H); Large Locking Snap Hook: 15/16" (24mm) eye (I.D.), 3 11/32" (85mm) opening, 13" (330mm) length. Rated to 5000 lbs.

1711 (Option +K); Alloy Steel Roto Snap: .670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs.

17051 (Option L) Locking Rope Snap [1" (25mm) eye (I.D.), .583",(15mm) opening (keeper to bill in open position), 5.75" (146mm) length, 12.6 oz. weight. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 17051 Locking Rope Snap (not shown) with a 3600 lb gate load.

E - desired length

D C BFA

17051

1711 30342

See following page for carabiner options


Fall P

rote

ctio

n

102

LanYardSCarabiners

retractable Lanyards

Indicates Hardware meets ANSI

Z359.12-2009 standard.

5008-83RV

Retractable Lanyard For use in an aerial lift truck. Attaches directly to boom.

The retractable lanyard, rated to 310 lbs., automatically extends and retracts to allow user mobility. This unit utilizes an inertia-brake mechanism which locks when 5" of material pulls out per second to restrain the worker to a fall of less than 12". Meets all applicable ANSI standards.

A - desired length

C B DModel 5008-83EV

(Hardware for both ends except when noted)

RETRACTABLE UNIT

5008 DCBA OPTIONAL

LENGTH IN FEET SWIVEL CONNECTING DEVICE FRAME END

CONNECTING DEVICE - LANYARD END

OPTIONS

8'

6'

10'

0 = None3 = 5/16 Swivel w/ Bolt & Nut

0 = 1" dia. Integral loop with wear piece

+6 = Locking Rope Snap, aluminum body - stamped

F = 1 3/4" ret. lanyard bracket (frame end only)

V = 1706 locking snap or when used with option +Z, a 17061 with 3600 lb gateload

Z = 3129 ladder hook 1 3/4"

+N = Attac carabiner 223516Suffix +Z = Indicates hardware meets Z359.1 (3600 lbs gate)

A1 - Rubber boot for carabiner

K = Signifies Buck Stop pack only attached to lanyard end

5008-80+1V

5008-103EV

5555SA Ball Lock Aluminum Carabiner (Option +2)Length – 4 5/8" (117.48 mm)Opening – 1" (25.4 mm)Breaking Strength – 6,295 lbs. (28 kn.)

5005K Steel Auto Lock CarabinerLength – 4 1/2" (114.3mm)Opening – 1 1/16" (26.99mm)Breaking Strength – 6,747 lbs. (30kn)

5555W1 Tri-Act CarabinerLength – 4 5/8" (117.48mm)Opening – 1 1/8" (28.58mm)Breaking Strength – 5,625 lbs. (25kn)

5555WSA William Ball Lock Aluminum CarabinerLength – 4 5/8" (117.48mm)Opening – 1 1/8" (28.58mm)Breaking Strength – 5,625 lbs. (25kn)

5555S1 AM'D Aluminum CarabinerLength – 4 3/8" (111.13 mm)Opening – 7/8" (22.23 mm)Breaking Strength – 6,295 lbs. (28 kn.)

Non 3600 lb Gate Triple Action

5005L2 Steel Twist Lock CarabinerLength – 7" [177.8mm]Opening – 1 3/8" [34.93mm]Breaking Strength – 10,120 lbs. (70 kn)

5005T Twist Lock Steel CarabinerLength – 4.38" (111.3 mm)Opening – .94" (24mm)Breaking Strength – 51 (kN)

Miscellaneous

50051 (Option D) Auto Lock Steel Carabiner w/ 3600 rated gate keeperLength –4.88" (124mm)Opening – .94 (24mm)Breaking Strength 9,217 lbs (41 KN)

5555S3 (Option A) Aluminum Carabiner w/ 3600 lb gateLength – 4. 7/8" (123.83 mm)Opening – 3/4" (19.05 mm)Breaking Strength – 6744 lbs. (30 kn.)

3600 lb. Gate Triple Action - Meets ANSI Z359.12-20093600 lb. Gate Double Action - Meets ANSI Z359.12-2009

5005L1 (Option +3) Steel Twist Lock CarabinerLength – 7 5/8" (193.68mm)Opening – 2 1/8" (53.98mm)Breaking Strength – 9,220 lbs. (40kn)

1711 (Option +K); Alloy Steel Roto Snap:.670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs

5555S2 Aluminum Carabiner w/ 3600 lb gateLength – 4.80" (122 mm)Opening – .78" (20 mm)Breaking Strength – 6,730 lbs. (30 kN.)

5005M Screw Gate Steel Carabiner*Length – 4 1/2" (114.3mm)Opening – 1 1/8" (28.58mm)Breaking Strength – 11,240 lbs. (50kN)

Non Man Rated

*WARNING: NOT INTENDED FOR HUMAN SUPPORT OR FALL PROTECTION


Fall Protection

103

PErSOnaL FaLL LiMiTErSBuckLimiter

6008-74+Y+4+Z

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy.• Tangle free swivel top for added mobility.• 7' extension for expanded work area• Dyneema® polymer fiber 1" webbing - up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals.

• A braking system designed for smooth consistent operation to prevent "jerky" lock-ups.• No factory recertification required.•Retractable unit (no hardware) only weighs 1.9lbs• Rated to 350 lbs.• Dual BuckLimiters offer continuous 100% fall protection (not for multiple user connection)

6008-74D+4+Z 6008-74+YV+Z 6008-74+Y+Y+Z6008-74DV+Z6008-74D+4+ZAttached to a

BuckFit harness

6008 = Single PFL

RETRACTABLE UNITCONNECTING

DEVICE (WEB END)*CONNECTING

DEVICE (SWIVEL END) * SWIVELLENGTH IN FEET

7'

4 = Swivel Built In

D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

+4 = 2 1/4" locking snap 3035 or when used w/ option +Z , a 30351 w/ 3600 lb. gateload

+Y = Triple Lock Aluminum Carabiner (3600 lbs. gate) D = P/N 50051 Steel Carabiner

w/ 3600 lb. gate

V = 1706 snap or when used w/ option +Z, a 17061 w/ 3600 lb. gateload.

+Y = Triple Lock Aluminum Carabiner (3600 lbs gate)

+Z = All hardware on lanyard meets Z359.12 2009, 3600 lb requirements

* Load capacity = 350 lbs.

+T = N 3618 Tie Back Snap, 3600 lb side & gate load compatible

OPTIONS

C = Red 1' tube wear piece 22" long working length (26" cut length)

D6008 = Dual PFL

Model 6008-74+Y+TC+Z - Tie Back BuckLimiterFeatures a specifically designed flat bill snap which allows webbing to lay flat.

Model D6008Q1Dual BuckLimiter

new

Model D6008-74+Y+ZDual BuckLimiter

6008K = For Kevlar to meet ASTM F887 Sections: 23.8.1, 23.8.2, & 23.8.3

P = Conlour Foam Pad with two adjustable straps and two elastic straps

W4 = Manufactured with deployment label. To deploy @ 600lbs.


Fall P

rote

ctio

n

104

rOPE / CaBLE graBS & VErTiCaL LiFELinES & anCHOr SLingSrope & Cable grabs

Vertical Lifelines anchor Slings

Model 7V-8G150+Z - Lifeline5/8" diameter 16 strand double braided rope vertical lifeline with a 17061 locking snap hook that meets ANSI Z359.12-09 3600 lb. gate requirements. This is a high strength, low stretch lifeline that is Samthane coated to resist wear.Model 7V-8G1100+Z: 100' Lifeline

Model 3901 - Temporary Anchor Rated to 5000 lb.A sling that allows user to make a half hitch around a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 5' length use model number 3901-5).

Model 7V-4A150+Z - Lifeline5/8" diameter 3 strand vertical lifeline with a 17061 locking snap hook that meets ANSI Z359.12-09 3600 lb. gate requirements. A blended polyester/polyolefin rope is used to provide maximum life. Model 7V-4A1100+Z: 100' Lifeline

Model 4888-40 - Lifeline3/8" eye to eye wire sling, 5/8" metal thimble with a 40' spliced 5/8" Tenex rope with dual whipping twine, 80lbs. each, and a locked brummell splice. Available in different lengths.

Model 3902-6 - Temporary Anchor Rated to 5000 lb.A sling that utilizes a small dee to pass through a larger dee making a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 4' length use model number 3902-4).

Model 5004T - Rope GrabThis Rope Grab is made to fit 5/8” - 3/4” rope. The grab is made of high quality aluminum alloy with dual cams for better braking. This grab will move freely up and down until a fall occurs.Model 5004K for use on 1/2" - 5/8" rope.

Model 5013 - Cable GrabThis Cable Grab is designed to work on 3/8” cable. Should the user fall while ascending or descending, the cable grab will lock onto the cable preventing the user from falling more than one foot.Model 5012 for use on 5/16" cable.

Model 3032L - Spreader SnapEasy to use locking spreader snap.Overall Length - 9 3/4"Eye Diameter - 1"Rated to 5000 lbs.

Model 39SQ1-150 Lifeline1/2" Kernmantle lifeline features a stitched end with steel thimble.

Model 5004F - 5/8" Rope Grab Moves up and down the rope with user until a fall happens, then it locks to the rope. This rope grab also has the added feature of a park brake, so the user can lock the grab above their head while working to minimize the fall distance.

Model 5004 - Stainless Steel 5/8” Rope Grab Moves freely up and down until a fall occurs. The downward pull will stop the fall by locking the CAM to the rope.


Fall Protection

105

rETraCTaBLE LiFELinES & SUSPEnSiOn SYSTEMSretractable Lifelines

Bosun's Chair

rigging Blocks

Model 1305 - Bosuns ChairA sturdy 1" x 12" x 24" (25 x 30 x 61 cm) bosun's chair, utilizing plywood with metal cleats on the underside for reinforcement. The body support harness is constructed of 1 3/4" (44.5 mm) nylon web that weaves through the seat in four corners to a single dee ring to assure the user support and balance. The waist belt fastens around the user's waist using a tongue buckle and grommeted holes. Attached to the center of the waist belt is a 5000 lb. (22 kn) rated dee ring used to secure to an independent lifeline. Meets OSHA 1910.28.

Model 6007-164DV+Z Lightweight 16' Webbing Retractable Lifeline Lightweight Retractable lanyard features a light yet rugged composite housing. Housing swivels to minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

Model 5201-50 - Retractable LifelineRetractable lifelines are ideal for persons susceptible to a slip or fall from elevated heights. Should the user fall, a centrifugal braking mechanism engages to limit the free fall to less than two feet (.6 m). The simple rules of fall protection requires a suitable anchor, a connection device such as a retractable lifeline and a full body harness. Shock absorbers should always be used to protect the user and reduce force applied to the anchor point. Rated at 350 lbs.

Model 5201-25 25 ft. (7.6 m) of galvanized cableModel 5201-50 50 ft. (15.2 m) of galvanized cableModel 5201-100 100 ft. (30.4) of galvanized cableNote: If Kevlar desired add suffix 'K', example 5201K-25. If stainless desired add suffix 'S' example 5201S-25. For steel stamped housing model add suffix 'SH' to the model

Model 5007S & 5007LAluminum Rigging BlocksThese rigging blocks from Buckingham combine the convenience of a spring loaded upper pin with a captive bushing, and a lightweight aluminum design. Simply push and twist the upper pin, and the checkplates will swing open. And best of all, the bushing and pin can not fall out of the block. Stainless steel sheave and bushing pins, with an epoxy polyester coating over aluminum make up the construction of this high quality rigging block. Available for 5/8" and 3/4" rigging lines.


new


Fall P

rote

ctio

n

106

HarnESS BEaMSBuck Trainer

Harness BeamModel 5203 - Harness BeamThe answer to OSHA 1910.269 when training (unqualified) wood pole climbers.• Full 360° Ball Bearing rotation for traditional climber training• Provides a 5400 lb. anchor point (OSHA 29CFR 1910.269)• Requires no pole drilling• Weighs approximately 160 lbs.• Adjustable to fit over a max. 9.5" diameter pole top*• 36" Arm length (Center pole to arm end)• Center lifting eye• Limits arresting force to less than 900 lbs. when used in conjunction with a quality retractable lifeline and full body harness• Installation on a 45' class 3 pole takes less than 10 minutes• Eight bolts to secure to pole*To fit poles with a 12" diameter top order Model 5203-12.

Model 5203Model 52032 - Dual harness beam - two trainees are fall protected.

New Feature - Leveling footpads

Model 5204 - Buck Trainer The Buck Trainer is a reliable apprentice fall protection 5000 lb. anchor that rotates 250°. It can be attached to any pole up to a 9" diameter at any height by a qualified climber and a groundman. This unit is ideal to transport to remote areas to field test potential apprentices before sending them to the actual training facility.

Benefits and specifications of the Buck Trainer:• Fits a pole with diameter up to 9"• Mounts anywhere on pole• Rotates 250°• Keeps climber 36" from pole• Tested to 5000 lbs.

All parts included to secure to Pole• Ratchet strap to lift Buck Trainer with handline• Bolts and nuts• Mounting brackets• Carabiner to mount lifelineRetractable Lifeline sold separately.


Fall Protection

107

Model 301SR - Self Rescue SystemThis New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape. Comes with two rappelling straps.Model 301SR-50 for 50'Model 301SR-75 for 75Model 301SR-100 for 100'Custom lengths available upon request.Rated to 300 lbs.

rESCUE SYSTEMSSelf rescue System

after Fall Self rescue System

Model 101SR - Self Rescue SystemThe Buckingham 101SR provides all the components required to self-rescue or if the need arises to rescue a fellow employee. The 101SR descender will automatically stop the user until the user compresses the handle allowing a smooth controlled descent. An additional built in (anti-panic) safety feature stops descent if the user compresses the handle too hard. This unit will allow the rescuer the advantage of lowering a hurt person with ease as well. The 101SR kit comes with retrofit rappelling straps that can be added to an existing harness for self-rescue.101SR-50 (50' 1/2" braided rope)101SR-75 (75' 1/2" braided rope)101SR-100 (100' 1/2" braided rope)Order Option W (101SRW) for Water Resistant Packing - All components Vacuumed Sealed4563 Bag onlyCustom lengths available and packed in a back pack rope bag.Rated to 330 lbs.

new

To ascend the user climbs up the built-in steps.

Steps spaced 8" apart and stiffeners are built in to ease inserting foot.

Model 102SRS A short pack that connects to an anchor point and hangs freely.

Model 102SR & 102SRS - After Fall Self Rescue SystemAn employee working alone subjected to a fall from a bucket truck could be suspended for hours if no assistance is available. With the 102SR or 102SRS, the victim subjected to a fall can easily climb back into the basket, reducing the risk of suspension trauma. When the person falls, the 102SR systems deploys a 15' webbed ladder allowing them to ascend back to the bucket and safety.

Model 102SR A longer pack that mounts to the bucket truck boom.

CompaCt!


Fall P

rote

ctio

n

108

rESCUE SYSTEMSafter Fall Self rescue System

dual Self rescue System

Model 106-50 - Self Rescue System Provides the means to safely and easily descend to the ground in the event of a fall from the bucket or need to evacuate an inoperable bucket. Ideal for the 'One Man Crew', this system combines a specially designed bag that, when deployed, releases a ladder [to relieve pressure], an ascender, descender and 50' of rope. Longer lengths are available upon request.Rated to 330 lbs.

After fall victim pulls components from bag

and attaches descender to rappelling loops on

harness

Victim then steps up into ladder and disconnects shock absorbing lanyard.

Then descends safely to the

ground.

Model 3813D1Q4-95 Combination Hurtman/High Elevation Self Rescue SystemThis kit provides all the components needed to remove an injured co-worker from the bottom of an aerial basket and will also allow someone who is stranded in an aerial basket to safely and easily descend to the ground. Kit contains stainless steel blocks with a 5 to 1 lifting ratio, 95' of a 1/2" braided rope, boom strap with dee ring, descending device with built in anti-panic feature and retrofit rappelling straps. Locking snap hooks and carabiner feature ANSI Z359 3600 lb. rated gates. Packed in a 6" diameter by 26" tall containment bag. Rated to 330 lbs.

Model 4469B1-150 - Back Pack Rope BagBack Pack Rope Bag makes carrying the high elevation system aloft easy. Padded shoulder straps and a chest strap to keep shoulder straps in place while climbing. Three outside mesh pockets with hook and loop closures. Includes quick adjust friction buckles, elastic strap retainers, fairlead drawstring closure system, poly battens and a carry handle. Available in 120', 150',200, 225' and 300' models.

Model 7003SDual Rescue StrapRescuing an injured co-worker has never been easier. The Dual Rescue Strap from Buckingham enables the user to safely and easily rescue a co-worker from an elevated position using our 101SR Self-Rescue System. The newly redesigned strap requires only one carabin-er and keeps the descent device closer to the user for better control.


Fall Protection

109

rESCUE SYSTEMSTower rescue Blocks

Buck diaper

Hurt Man Bucket Truck Basket removal

Model 81 - Buck Diaper Designed to be used for a victim that needs to be lowered from a high elevation. The Buck Diaper provides a secure, easy method to transport the victim.

Model 3816 - Tower Rescue BlocksDesigned specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a lifeline. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.

Model 3813Unit designed to stay on boom at all times.Non-slip adhesive rubber to prevent slippage.

Model 3813D1Boom strap with dee ring stays on boom. Rescue blocks are stored in a compartment of the line truck.

Should a fellow employee experience an accident where they fall to the bottom of the basket floor, removing them without a mechanical advantage can be near impossible. The Model 3813, with the stainless steel block and tackle provides a lifting ratio of 5 to 1 with 95' of double braid, 11 mm rope. Since harnesses are predominately used in bucket trucks, the ability to lift the victim higher is a must to clear the top of the basket. Buckingham has addressed this by a higher mount on the boom and a lower cord to deploy and activate the block and tackle system.


Fall P

rote

ctio

n

110

rESCUE SYSTEMSFigure 8 rescue Straps

BuckStep rescue Buck

ratchet Boom Strap

Model 4578 Leather

Model 4579 Canvas

Model 4579 / 4578 Rescue Pouch The Rescue Pouch is designed to store a knife and a Figure 8 with strap in the front pocket. The main section of the pouch would be used to store tools and miscellaneous nuts and bolts.

Model 5009E-36Shown girth hitched on a structure.

Model 5009E-36 shown tied to a victim's shock absorbing lanyard.

Model 5009-36 Should a worker fall, the rescuer has everything they need to lower the victim to the ground safely. • The rescuer would rig the handline through the Figure 8 already secured to the structure [see photo above].• The rescuer would then attach the handline to the victim's shock absorbing lanyard loop.• The rescuer would then cut the red rescue loop on the shock absorbing lanyard and lower the victim to the ground.

rescue Procedure:

Rescue Figure 8 straps are designed to be girth hitched on a structure to aid in a rescue of an injured victim. The strap is 36" long and made from 1" yellow webbing. The Figure 8 is made from aluminum and can either be ordered without ears (model 5009-36), or with ears (model 5009E-36) to prevent rope from slipping down and knotting at the bottom of the Figure 8.

Model 5009E-36

Model 694 - Rescue Buck Rescue Buck is ideal for pole top rescue training, retrieval training and fall protection testing. You can fill rescue Buck with recycled tires to the desired weight. Height - 5' 6" (1.68 m)Model 38523-M body belt is recommended for the Rescue Buck

Model 694F1 - BuckMixBuckmix rubber pellets: 55 lb. bag.

Designed to alleviate the effects of orthostatic intolerance, also known as suspension trauma. Potentially fatal suspension trauma can occur within minutes of a fall. Since the typical rescue time is 15 minutes, the BuckStep allows a victim to immediately deploy a body support system that allows for improved blood circulation and the ability to move and flex muscles until rescue. Compact and easy to mount, the BuckStep attaches to any brand full body harness and is fully adjustable for any sized user. Order Model 105RS for an arc tested system that meets ASTM F887.

1.) Remove carabiner & strap from pouch

3.) Step into sling with both feet

BuckStep 105RS

2.) Attach carabiner to opposite side of harness

Model 105RS - BuckStep System

Model 3809RRatchet Boom Strap (5000 lbs. rated) The ratchet boom strap provides a secure anchor on the bucket truck boom.


Fall Protection

111

BUCkET rESTrainT

Buck-it accessories

Buck-it restraint System new

Waist Belt / Harness Floating Restraint

Strap

Model 125R - Buck-It Restraint SystemBuckingham has developed a bucket restraint system to address the concern of the OSHA compliance officers allowing a user wearing a full body harness and 6 foot lanyard to fall from the basket and hit an object below.

System Concept:• A 10,000 lb. nylon strap is secured around the basket using a ratchet strap and secured with a cotter pin.• The strap that secures the user is independent of the basket strap and ties back to the anchor• This system allows users the mobility to do the work and avert the chance of falling.

Should the webbing around the basket be severed, the attachment back to the anchor is independent of the webbing around the basket.

Buck-it Restraint System attached to Harness

Extension Strap

Ratcheting Basket Strap

Ratchet Jacket

Wear Guard

Basket Restraint Deceleration Lanyard

Cotter Pin to prevent from coming loose

Model 125R2 - Mounting BracketFor Buckets with controls on the outside, the Buck-It Fiberglass Bracket keeps webbing against the basket to prevent user getting tangled in webbing while using the controls.

Before without Bracket

After with Bracket

Model 125R1 - Retro Harness StrapThe Retro Harness Strap adds onto a harness to connect the Buck-It Restraint System

System also includes a shock absorber between the anchor attachment and user. This unique feature will keep the operator, the basket and the boom from hitting the ground in the event of a catastrophic separation of the bucket from the boom.


Fall P

rote

ctio

n

112

COnFinEd SPaCE rETriEVaL

Confined Space Retrieval Harness

Confined Space Retrieval Systems

accessories

When entering a confined space, a worker must be attached to an independent lifeline for adequate fall protection and retrieval. Buckingham's retrieval systems exceed all current OSHA and ANSI requirements. Read and follow the users manual enclosed with every system.

A complete retrieval system should consist of:1) A man rated winch to be attached to personnel at all times during the descent and work below grade.2) Tripod3) Full Body Harnesses (See Harness Section)4) Work Winch to raise and lower materials only.Tripod, Man Rated Winch and Work Winch are purchased separately.

5003(Tripod)

50003-wayWinch

5010(PersonnelWinch)

Model 5007 - Pulley Model 72 - Retrieval Yoke w/ Two 36" (.9mm) LegsUses two locking snaphooks, 1 3/4" (44.5 mm) nylon web and a 5000 lb. (22.2 kn) rated dee ring.

Model 50037BCarry bag for 7' Tripod

Model 50039BYCarry bag for 9' Tripod

Model 5000BCarry bag for retrieval system winch

Model 80 - Confined Space Retrieval Harness Designed to easily lift a hurt man out of a confined area. Simply place the harness under the victim just below the armpits, secure the hook and loop chest strap closures, pass the leg straps with carabiners between the victim's legs and attach to leg strap loops. Attach winch line hook to the retrieval loop, and lift to safety. The unique design of the retrieval harness supports the victim in an upright position making it easy to lift victim through man hole. One size fits all.


Fall Protection

113

COnFinEd SPaCE rETriEVaL

Component accessories

Above winches come in 50', 65' or 100' lengths. Please designate length desired.Winches may be purchased with spectra rope (Kevlar) as lifeline by adding suffix 'K' to model number.

5007 Pulley and carabiner sold

separately

Capabilities Model 5000 3 Way Winch

Model 5002 Work Winch

Model 5010 Personnel Winch

1) Arresting Yes No No

2) Retrieval Yes Yes-Materials Only Yes

3) Lowering Yes Yes-Materials Only Yes

BUCKINGHAM WINCHES (Made in the USA)

Winches Specifications

Model 5000

Maximum Working Load 350 Pounds (136 kg

Cable Speed to Engage Brake

4.5 Ft./Sec. (1.4 m/sec)

Stopping Distance <24" (220# Wt. - No Free Fall) .6 m (100 kg)

Arresting Force 1200 Pounds (5.3 kn) (approx.)

Gear Ratio 5.5:1

Retrieval Speed 20 Ft./Min. (6 m/sec) (approx.)

Brake System Friction Disk

Cable Length 50, 65 or 100 ft. (15, 20 or 30 m)

Weight 50 ft. (15 m) - 32 lbs. (14.5 kg) 65 ft. (20 m) - 35 lbs. (15.9 kg) 100 ft. (30 m) - 50 lbs. (22.7 kg)

Housing Aluminum Alloy

Rope Drum Aluminum Alloy

Shaft Stainless Steel

Mainspring Spring Steel

Brake Pawls Stainless Steel

Brake Cog Stainless Steel

Bearings Ball Bearings

Brake Pad Composite

Cable Galvanized Steel Stainless Steel Kevlar Rope

Tripod Specifications

Model 50037 Foot Tripod

Model 50039 9 Foot Tripod

Maximum Static Load 5400 pounds 5400 pounds

Maximum Work Load 350 pounds 350 pounds

Height With Legsat Maximum Extensionat Minimum Extension

84"84"48"

108"108"96"

Distance Between Feetat Maximum Extensionat Minimum Extension

56"36"

68"45"

Upper LegsAluminum ExtrusionWall Thickness

1 3/4" x 1 3/4" o.d1/8"

1 3/4" x 1 3/4" o.d.1/8"

Lower LegsAluminum ExtrusionWall Thickness

1 1/2" x 1 1/2" o.d.1/8"

1 3/4" x 1 3/4" o.d.1/8"

Adjustment Lengths 2 3/4" 2 3/4"

Permanently AttachedPush Pin

Galvanized Steel3/8" dia.

Galvanized Steel3/8" dia.

Feet

Rubber Pad

Cast Aluminum6 1/2" x 3" W x 2" H5 1/4" x 2 1/2" W

Cast Aluminum6 1/2" x 3" W x 2" H5 1/4" x 2 1/2" W

HeadForged Anchor BoltsPre-drilled Leg Locks

Cast Aluminum5/8" x 6"3/8" x 4"

Cast Aluminum5/8" x 6"3/8" x 4"

Leg ChainsWeight

168"40 pounds

192"46 pounds


Fall P

rote

ctio

n

114

nOn - EnTrY ManHOLE rESCUE SYSTEMSMaterial / rescue Lift with guard

Model 39SAM13Q9-30[Fig. 3] Rescue Line Kit includes two 30' rescue lines, Model 40 telescopic pole adaptor and rope bag.

Model 39SAM13Q3-30[Fig. 2] Lifeline Kit includes one 30' lifeline, with ascender, break away assembly and rope bag.

[Fig. 2]

[Fig. 3]

[Fig. 1]

Model 105Q1-30 Lifeline Kit includes: manhole guard, winch [Fig.1] and 39SAM13Q3-30 Lifeline Kit [Fig. 2].

Model 105Q2-30 Rescue Kit includes: manhole guard, winch, [Fig. 1] 39SAM13Q9-30 Rescue Line Kit [Fig 3] and 16' telescopic fiberglass pole [not pictured].

Model 40 for Telescopic Pole Adapter Assembly (shown attached to a carabiner).

Model 63936QFeatures a dorsal web loop ring and easy access reflective loops at the shoulders, hips, pigtail and neck area. Order Harnesses separately.

For a free DVD demonstrating both systems, call Buckingham Customer Service at 1-800-937-2825

This unique system allows for a rescue to be accomplished without having to send additional personnel into the hazardous area. Two ways in which a rescue can be performed are: Model 105Q1-30: Entrant suited with a full body harness (No. 63936Q) enters the confined space with a lifeline (39SAM13Q1) attached. The lifeline is attached to the manhole guard/rescue winch with a specially designed breakaway assembly. This device will release upon impact such as that of a vehicle which has entered the work zone and strikes the manhole guard. For rescue the attendant/rescuer attaches the ascender to the winch line and proceeds to raise the victim. Model 105Q2-30: Entrant suited with a full body harness (No. 63936Q) enters the confined space without being tethered. For rescue the attendant/rescuer uses the rescue line system (39SAM13Q9-30). The rescue line equipped with a carabiner is attached to a 16' telescopic pole via the telescopic pole adaptor (Model 40). The adaptor releases the carabiner once the rescuer locates one of four reflective rescue loops, "hooks" into a loop and pulls back on the pole. The rescue line is then tied on to the winch and the rescuer then proceeds to raise the victim.

This rugged material lift is an excellent device for raising and lowering equipment and material into manholes. It clamps securely to the manhole guard, making it a safety fence as well as a valuable tool and rescue device.The entire unit is lightweight and portable, sets up quickly and has a 300 lb. capacity. The side pieces are constructed of high tensile, heavy-gauge aluminum with a durable yellow finish that stands up to rough weather and wear. Lift rope 3/8” Amsteel II Braided Rope.

Turns retrievals into rescues


Fall Protection

115

LaddEr & rOOF TOP FaLL PrOTECTiOnLadder Fall Protection Systems

roof Top Fall Protection Systems

Ladders and rounded poles are a potentially dangerous combination. Buckingham offers a ladder safety solution that includes ladder safety straps enclosed in bags that are attached to your ladders. No more forgetting the safety straps in the vehicle or the garage. Straps are ready for deployment when the ladder goes up to prevent kickout and excessive rocking. The Buck Ladder Lock is designed for poles and trees. The Buck Ladder Lock advantages include:• Bags that do not interfere with the climbing space of the technician’s foot or interfere with the storage of the ladder on the truck.• Highly visible brightly colored bags to remind technicians that protection is required.• Quick access to straps.• Weather resistant storage bags.• Complete system with top and bottom bags and straps: Model 355BT• Bottom bag and straps: Model 355B• Top bag and straps: Model 355T

Model 355T, Orange Top Storage Bag & StrapsModel 355B, Yellow Bottom Storage Bag & Straps

Model 3114The Fall Arrest Solution for roofers designed as a temporarily installed anchorage connector on wood frame structures with lifeline components including:• Full Body Harness• Shock Absorber attached to Rope Positioner (compatible with 5/8" rope only)• 50' of Multiline 5/8" rope• Roof Anchor• Nails• Carry BagRated to 310 lbs.

Model 3111 is designed to fall protect individuals installing roof top equipment. Includes:• Model U6393600 - Full body harness.• Model 5V+5113H - Buck Stop Deceleration Lanyard.• Model 7+K+K4A1100 - 100' of 5/8" diameter multiline rope with 2 locking rope snaps on opposite ends.• Model 45400R2-18 - Carry bag.

Model 355BT

Roof top fall protection is required when working on sloped roofs or within 10 feet of the edge of flat roofs.

• Model 16-16R-150 - 16 oz. red throw bag with 150' of attached slickline.• Model 4560 - Carry bag for throw bag and slickline.


Fall P

rote

ctio

n

116

notes:

Buckingham Offers a variety of Tower Fall Protection Systems to fit many needs.


Towe

r

118

Tower Fall ProTecTion SySTemSSummary of the "aBc's" for Tower Fall Protection

Tower Fall Protection consists of three crucial components: Anchors, Body Support, and Connecting Devices. All three components are required for any fall protection system whether it is work positioning, fall arrest, fall restraint, retrieval, or suspension. Without the "ABC" components fall protection can not be completed. Buckingham offers numerous anchors, body support and connecting device components used in fall protection as well as complete systems.The information in this catalog is to be used as a reference. Please consult instructions and warnings before use.

Anchor StrapsModel 3901

Model 3902-6

Rope GrabsModel 5004

Model 5004FModel 5004T / 5004K

Buck HookModel 50371U

Temporary Anchors Anchors

FlangeModel 30-F1Model 30-F2Model 30-F3Model 30-F4

Step BoltsModel 3058Model 3075

Anchors

Body Support

Buck Ergo ModularBody Belt: Model 4200Harness Model: 68D98C74C0K4

Connecting Devices

BuckAdjusterModel 9+N08K15A2M4

Pole StrapModel 337099E

SuperStrapModel 48129W2Y

PFLModel 6008-74+YV+ZDual PFLModel D6008Q1

Buck ErgoModel 619891

Y Style Harness w/ Body BeltModel 61992

X-Style Harness w/ Body BeltModel 61991

Dual Buck StopModel 546716RD+H+Z

Buck Stop Tie BackModel 5V+T7A116X6

Buck YardModel 84V116+Z

Examples of:

Examples of:

Examples of:

Tie Back PFLModel 6008-74+Y+TC+ZStep-SafeTM

Model 61


Body Belt features female interlocking buckles and harness features male to connect.


Tower

119

Tower Fall ProTecTion SySTemSDual lanyard System

Dual Lanyard Fall Arrest Systems mandate the user to be continually attached to the structure starting from the ground, all the way to the top of the structure, and back down to the ground. A rescue system is built into the Dual Fall Arrest System.

Model D6008Q1Dual PFL

Model 546716RD+H+ZDual Buck Stop

- Step Bolt / Flange - 5000lbsSee pg. 122 for details.

- Harness ideal for Work Positioning and RescueSee pg. 123-125 for details.

- Dual Lanyard with hardware optionsSee pg. 126-127 for details

1. The climber attaches one end of the dual lanyard to the anchor step bolt/flange on the tower or pole and begins stepping up until the waist is even with the connection.2. The climber would then take the other end of the dual lanyard and connect to the anchor above approximately three steps up.3. Once secure, the climber would disconnect the connection at the waist and ascend until the connection above is at the waist and repeat the process until desired height is reached.To Descend: Disconnect the upper connection while the connection is maintained at the waist level.To Transition Horizontally: Use a temporary anchor strap Model 5009E-36 or 3901 (see pg. 122 for details) and wrap around davit arm. Take one leg of the dual lanyard and connect to temporary anchor while other leg is still connected to step bolt / flange.

anchorage

Body Support

connecting Device

rescue

To ascend / Descend

Model 3058 & 3075Step Bolts

Model 30-F1Flange

- In the event user was to fall rescuer would:1. Connect Descender to Anchor2. Connect LifeLine to Loop on Lanyard closest to victim3. Ensure LifeLine is secure and then cut the red rescue loopSee pg. 128-129 for details.

Model 3901Temporary Anchor

Model 5009E-36Rescue Figure 8 Strap

Model 101SRQ38-250Self Rescue System

Model 301SR Self Rescue System

Model 619891Buck ErgoBelt / Harness

Red Rescue Loop


Towe

r

120

Tower Fall ProTecTion SySTemSBuck Hook System

The Buck Hook offers fall protection from ground, to elevated heights, back to ground.

Model 50045/8” Rope Grab

anchorage

Body Support

connecting Device

- Buck Hook - Temporary AnchorSee pg. 122 for details.

- Full Body Harness / Body Belt combination with work positioning dee rings See pg. 123-125 for details

- Secondary Lanyard / Positioning StrapSee pg. 126 for details

- Rope with Rope GrabSee pg. 122 for details.

Model 5004F5/8" Rope Grab

Model 5004T5/8 - 3/4" Rope Grab

Model 9+N08K15A2M4Secondary Lanyard

Model 48129W2YSecondary Lanyard

1. With sternum attachment on harness, connect short tether to rope grab using a carabiner.2. Using the extension pole with Buck Hook and 1/2" non-stretch rope attached, lift hook up and hook onto lattice making sure the end of the pole is at foot level to ensure pole does not get caught in a bolt bag or other equipment allowing the possibility of lifting the hook off the lattice.3. Once hook is in place on lattice, climb up near Buck Hook.4. Secure secondary positioning lanyard (not to exceed a 2' fall) around lattice. Once secure, move Buck Hook up to next highest point making sure the end of the pole is below the feet.5. Once at work site user should secure the climbing line to a suitable anchorage point. Lifeline can then be attached to anchor strap.6. Once lifeline is installed to secure anchor, other climbers can connect their sternum attachment on harness to a rope grab and ascend or descend.

Rescue System should always be available.See page 128-129 for rescue systems.

Model 61992Y Style HarnessWith Body Belt

To ascend / Descend

Model 301SRSelf Rescue System

Model 337099EPositioning Strap

Model 101SRQ38-250Self Rescue System

Buck HookModel 50371U

LifelineModel 39SQ3-30


Tower

121

Tower Fall ProTecTion SySTemSStep-SafeTm System

1. The user would reach up to a step connecting one leg of the lanyard.2. Step up until snap is slightly below waist and connect second leg to a solid step ensuring snap is locked in place.3. Once hook is secured disconnect connection by waist and climb up until connection above is at waist.To Transition Horizontally: User can connect either the carabiner or secure the web anchor strap over the davit arm or lattice steel as shown below.

Web Anchor Straps(Sold Separately)

Model 3901 Model 3902-6

Model 61, the Step-SafeTM System, offers the user a dual lanyard for continuous attachment while climbing lattice or tubular transmission structures. This system utilizes an ergonomic snap that fits over an existing 3/4" dia step bolt with a hex or cap. The system consists of the dual lanyard, two special carabiners and two web anchor straps. See pg. 126 for details.

To ascend / Descend

Specifications

Step-SafeTM Dual LanyardStep-Safe Dual Lanyard with Scaffold

Carabiners Attached

Step-SafeTM Web Anchor Sling

Model 3902-6 Web Anchor Strap

Scaffold Carabiner

Web Anchor Sling (included)

Ergonomic Snap

Alloy Double Action Snaps Gate Face 220 lbf.Side Load 350 lbf.

Meets ANSI Z359.12-2009 Tensile Test, 5000 lbf.Snap features an integral load limiting design to

help reduce the force coming onto a step bolt and the hook itself.

Scaffold Carabiner Gate Opening 2.04" (52 mm)

Weight 13.22 oz (375 g)Outside Dimension 8.93" x 5.19" (227 mm x 132 mm)

Meets ANSI Z359.12-2009 Tensile Test, 5000 lbf.


Towe

r

122

Tower Fall ProTecTion comPonenTSanchorage

Model 50371U - Buck HookThe Buck Hook offers fall protection from ground to elevated heights back to ground. The system can be used in conjunction with Model 39SQ3-30 lifeline and Model 5004K rope grab or Model 6007-164DV+Z retractable lifeline.Buck Hook has a universal head and connects to a standard fiberglass stick.

Model 3901Temporary AnchorAllows user to make a half hitch around a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 5' length use model number 3901-5). Rated to 5000 lbs.

Model 3902-6Temporary AnchorUtilizes a small dee to pass through a larger dee making a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 4' length use model number 3902-4). Rated to 5000 lbs.

Model 5004Stainless steel 5/8” Rope Grab Grab moves freely up and down until a fall occurs. The downward pull will stop the fall by locking the CAM to the rope.

Model 5004T - Rope GrabRope Grab fits 5/8” - 3/4” rope. The grab is made of high quality aluminum alloy with dual cams for better braking. This grab will move freely up and down until a fall occurs.Model 5004K for use on 1/2" kernmantle rope.

Model 5013 - Cable GrabThis Cable Grab works on 3/8” cable. Should the user fall while ascending or descending, the cable grab will lock onto the cable preventing the user from falling more than one foot.Model 5012 for use on 5/16" cable.

Model 5004F - 5/8" Rope GrabMoves up and down the rope with user until a fall happens, then it locks to the rope. Rope grab also has the added feature of a park brake, so the user can lock the grab above their head while working to minimize the fall distance.

Overall Length: 8 1/2"Tread Length: 5"Thread Length: 2 3/8"5000 lbs. Rated

Model 3058 & 3075Step bolts with anchor:3058 - 5/8" Diameter thread 3075 - 3/4" Diameter thread

Model 7V-4A150+Z - 50' Lifeline• 5/8" diameter 3 strand blended polyester/polyolefin rope• 17061 locking snap hook• Meets ANSI Z359.12-2009 standardModel 7V-4A1100+Z: 100' Life LineUse with Rope Grabs: 5004F, 5004, 5004T

Model 4888-40 - Lifeline• 3/8" eye to eye wire sling• 5/8" metal thimble• 40' spliced 5/8" Tenex rope with dual whipping twine, 80lbs. each, and a locked brummell splice. Other lengths available.Use with Rope Grabs: 5004F, 5004, 5004T

Model 39SQ1-150 Lifeline1/2" Kernmantle lifeline features a stitched end with steel thimble.Use with Rope Grab: 5004KModel 39SQ3-30 30' Lifeline for use with Model 50371U Buck Hook

Flange Bolt HoleModel# Dia.30-F1 11/16"30-F2 15/16"

Flange Bolt HoleModel# Dia.30-F3 13/16"30-F4 1 1/16

30342 (Option +H); Tower Snap 15/16" (24mm) eye (I.D.), 3 11/32" (85mm) opening, 13" (330mm) length. Rated to 5000 lbs.


Tower

123

Tower Fall ProTecTion comPonenTSHarness & Body Belt combinations

Buckingham Harness and Body Belt combinations are ideal for individuals working where both Fall Protection and Work Positioning are required. Any lineman’s body belt can be permanently attached to a harness by means of stitching or by web loops. If you want a belt that can be removed, Buckingham offers quick connect nylon clips attached to the harness that keeps the body belt in place.

Model 619891 - Harness, ErgoBelt Combination (Sold TogeTher)Harness: 'H' StyleBody Belt: 4200 Buck ErgoBeltMeets all applicable ANSI standardsOrder by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

The 619891 is a combination of a harness connected permanently to the Buck ErgoBelt upper section through tunnels built into the belt. The harness is not sandwiched between the user and belt providing greater freedom of movement. Harness features a sateen liner on belt and shoulder pads, grommet leg straps, adjustable chest strap with patented quick connect buckle, rescue loop that can be used for pole top rescue, and dorsal attachment for pole top rescue (can be replaced with a dee ring or nylon loop).The ErgoBelt features a stabilizing strap, removable lumbar pad, plus buckles to connect to the lower seat section providing an extra set of dee rings if desired.

Model 61992 - Harness, Body Belt Combination (Sold TogeTher)Harness Model: 'Y' StyleBody BeltMeets all applicable ANSI standardsOrder by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

This 'Y' style harness, body belt combination features five dee rings: one at the dorsal, one at the sternum, one at the waist, and two for work positioning, and is put on by stepping into the belt, pulling the 'Y' over head and connecting a carabiner to the 5000 lb. rated loop at the waist. Harness features blue sateen shoulder pads, and wide leg pads with patented quick connect buckles for added comfort. The harness neck features a 'U' designed stitch pattern making the opening wider eliminating neck irritation. Buckle in front and back adjust height to create a snug fit.Body belt features tool loops, accessory snap and rings. Belt tightens using two friction buckles in front of the work positioning dees.


Model 61991 - Harness, Body Belt Combination (Sold TogeTher)Harness: 'Y' StyleBody Belt: Four DeeMeets all applicable ANSI standardsOrder by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

The 61991 is a combination of an 'X' style harness permanently attached to a four dee ring body belt. Harness features grommet leg straps, and shoulder straps that articulate through the sternum dee ring allowing the user to move with comfort. Shoulder straps adjust with a single slide buckle on the upper portion of the harness.The body belt has four work positioning dee rings, one upper set for secondary lanyard attachment and one lower set for primary attachment. Body belt is lined with sateen material and features a waist belt made of neoprene sandwiched between leather. Upper and lower sections are are connected together with webbing exceeding 5000 lbs tensile strength.


Towe

r

124


Harness is designed to connect to the 4200 Buck ErgoBelt with interlocking buckles. Features patented quick connect buckles at the chest strap and leg pads, vertical shoulder adjustment, and leather chafes behind the leg buckles for comfort and to reduce the potential of static charge. Harness features a 5000 lb rated nylon dorsal loop that eliminates metal and allows user to girth hitch their shock absorber.Body belt attaches to harness with female interlocking buckles located at the top of the pad. The ErgoBelt offers supreme comfort and features abdominal stabilizer system, dee ring distributing pads, equalization straps, removable lumbar support, and removable seat.

Harness: 68D98C74C0K4 - 'H' Style (Sold SeparaTely)Body Belt: 4200 Buck ErgoBelt (Sold SeparaTely)Meets all applicable ANSI standards


Harness Model: 603P8Q10 - 'X' Style (Sold SeparaTely)Body Belt Model: 2000M (Sold SeparaTely)Meets all applicable ANSI standards

Harness features a nylon web loop at the sternum, steel dorsal dee attachment point, webbing and interlocking buckles to allow user to insert a body belt, patented quick connect buckles at the leg straps and front connection, FR shoulder pads with loops and a 5000lb rated extra seat strap for use with the Buck-It restraint system.Body belt shown (2000M) is made from the highest quality leather and features a 5 1/2" foam cushioned back pad reinforced with raw hide lace.Harness can be adjusted to fit any size/type of body belt.Note: Similar harness with body belt attachment point can be ordered with a 'U' shape design to eliminate irritation of webbing around neck. See pg. 92 Model 603P8Q8.

Model: 169064H2 - Ergovation Harness (Sold TogeTher)Meets all applicable ANSI standardsThe Ergovation® Y-Style Harness is a unique harness tailored specifically to users that require either dorsal or sternal fall arrest attachment. It also has the ability to accommodate individuals utilizing Single Rope Technique (SRT) to access their work vertically. By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body. This Y-Style Harness is unmatched in comfort, durability, and versatility and it’s features include: ¼” closed cell foam padding for improved comfort and hygiene, pads stitched to the harness webbing to prevent shifting and improve easy donning of harness, aluminum dee ring for decreased weight and increased comfort while aloft, and Y2 friction buckles for quick and secure adjustment of webbing in front and in back.Rated to 310 lbs.


Tower

125


Harness features a Dri-lex® shell and Dri-lex® shoulder and leg pads that are designed to wick moisture away from the user and for added overall comfort, patented quick connect buckles with leather chafes at the chest and leg straps, friction buckles for height adjustment and a steel dorsal dee attachment. Harness is made from Type 13 nylon webbing with silver upper section and black lower sections.Body belt is Dri-lex® lined and features a 4" (10.2 cm) wide padded back pad for maximum support, patented quick connect buckles at the waist belt, and steel dee rings on the hips for use with WPFR system.

Model 61999 - Harness, Body Belt Combination (Sold TogeTher)Harness: 'H' StyleBody Belt: Lightweight DrilexMeets all applicable ANSI StandardsOrder by adding suffix S, M, L & X

‘H’ style full body harness features Dri-lex® shell that fits like a vest, Dri-lex® shoulder and leg pads to add to overall comfort and wick moisture away from the user, patent pending quick connect buckles on the chest and leg straps, steel dee dorsal attachment, spring loaded friction buckles for height adjustment, frontal chest dee ring that adjusts up and down independently of the shoulder straps allowing the user to correctly position when using a ladder climb system, and PVC shoulder loops to stow lanyard hardware

when not in use. Harness is made from Type 13 nylon webbing with silver upper and black lower sections.Body belt features specially designed work positioning dee rings to ease the attachment of a positioning strap by restricting dee ring swing, leather tool loops and an accessory snap and ring for tool storage, grommet tongue buckle to fasten the waist belt, and a 5" [12.7cm] wide belt with thick padding and built in stiffener for maximum comfort.The modular suspension system can be entirely removed if desired and includes a rigid batten seat with padding for maximum comfort (batten can be removed for those preferring a soft seat) and elastic retainers with snap fasteners on seat section to stow suspension dee rings out of the way when climbing.

This ‘H’ style full body harness is an economical choice and features interlocking buckles on the chest strap, steel dee dorsal attachment, friction buckles for height adjustment, and grommet leg straps. Harness is made from Type 13 nylon webbing with orange upper and black lower sections.Body belt is lightweight and padded for comfort and features work positioning dee rings and a grommet and waist strap.

Model 61995 - Harness, Body Belt Combination (Sold TogeTher)Harness: 'H' Style Body Belt: Lightweight DrilexMeets all applicable ANSI StandardsOrder by adding suffix S, M, L & XOrder Model 61995K1 for Kevlar mesh to meet ASTM 5887 Electric Arc Performance Requirements.

Model 62995 - Harness, Body Belt Combination (Sold TogeTher)Harness: 'H' StyleBody Belt: Lightweight PaddedOrder by adding suffix S, M, L & X


Towe

r

126

Tower Fall ProTecTion comPonenTSconnecting Devices

Model 5V+T7A16X6Buck Stop TieBack LanyardShock absorbing lanyard with specially designed snap hook making it safe and easy to tie back to itself. A 17061 snap hook is used to attach to the users harness. Meets ANSI Z359.13-2009 standard.

Model 5V6716RD+4+Z Buck Stop Dual LanyardFeatures two 30351 Locking Ladder Snaps that have a 2 1/4" gate opening, and a locking rope snap. Red rescue loops facilitate the rescue of an injured worker. For web loop attachment order Model 546716RD+4+Z.

Model 9+N08K15A2M4BuckAdjusterMade from stitched 1/2" rope with a green and white jacket with red core. Lanyard features a snap hook and the BuckGrab.

Model 84V116 - Buck Yard LanyardThe Buck Yard has the flexibility of a standard web or rope lanyard with the benefit of a reduced arresting force. The tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force to less than 900 lbs. The Buck Yard is available in 4', 4 1/2' and 6' non-adjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard, add the 'S1' suffix to the model#; e.g.: 84V116S1. Add suffix +Z for all 3600lb. hardware to meet ANSI Z359.12-2009.

Model 61 - Step-SafeTM

The Step-SafeTM system features the first connecting snaps that have been designed around hand ergonomics. The Step-SafeTM snaps can hook right onto the step bolts, or the scaffolding hooks can be used. System features a shock absorber to reduce impact in the event of a fall.

Model 546716RD+H+ZBuck Stop Dual LanyardFeatures two 30342 Tower Snaps that have a 3 11/32" gate opening. Red rescue loops facilitate the rescue of an injured worker.For locking rope snap attachment order Model 5V6716RD+H+Z.

Model 48129W2Y - SuperStrapThe SuperStrap has all the benefits of web combined with the easy adjustment of rope. Features the patent pending WebGrab for easy adjustment. Designed to use climbing over obstruction. Available in 6', 7', 8' and 9' lengths (add suffix: '-length' i.e. 48129W2Y-8).

Model 337099E - SuperStrapSuperStrap is made from 6 ply neoprene nylon with red warning core and features the patent pending WebGrab for easy adjustment, and no holes to find or run out of like conventional straps.

Model 334299E - 5'8" Model - 337099E - 7'Model 336099E - 6' Model - 338099E - 8'Model 336699E - 6'6"

Model 6007-164DV+Z Lightweight 16' Webbing Retractable Lifeline This Lightweight Retractable lanyard features a light yet rugged composite housing. Housing swivels to minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

new

Model 500000Shock Pack6" shock pack covered by clear plastic for easy inspection that greatly reduces the force of a fall at both the anchor point and the person.


Tower

127

PerSonal Fall limiTerSBucklimiter

6008-74+Y+4+Z

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy.• Tangle free swivel top for added mobility.• 7' extension for expanded work area• Dyneema® polymer fiber 1" webbing - up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals.

• A braking system designed for smooth consistent operation to prevent "jerky" lock-ups.• No factory recertification required.•Retractable unit (no hardware) only weighs 1.9lbs• Rated to 350 lbs.• Dual BuckLimiters offer continuous 100% fall protection (not for multiple user connection)

6008-74D+4+Z 6008-74+YV+Z 6008-74+Y+Y+Z6008-74DV+Z6008-74D+4+ZAttached to a

BuckFit harness

6008 = Single PFL

RETRACTABLE UNITConnecting

Device (web end)*Connecting

Device (Swivel end) * SWIVELLENGTH IN FEET

7'

4 = Swivel Built In

D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

+4 = 2 1/4" locking snap 3035 or when used w/ option +Z , a 30351 w/ 3600 lb. gateload

+Y = Triple Lock Aluminum Carabiner (3600 lbs. gate) D = P/N 50051 Steel Carabiner

w/ 3600 lb. gate

V = 1706 snap or when used w/ option +Z, a 17061 w/ 3600 lb. gateload.

+Y = Triple Lock Aluminum Carabiner (3600 lbs gate)

+Z = All hardware on lanyard meets Z359.12 2009, 3600 lb requirements

* Load capacity = 350 lbs.

+T = N 3618 Tie Back Snap, 3600 lb side & gate load compatible

OPTIONS

C = Red 1' tube wear piece 22" long working length (26" cut length)

D6008 = Dual PFL

Model 6008-74+Y+TC+Z - Tie Back BuckLimiterFeatures a specifically designed flat bill snap which allows webbing to lay flat.

Model D6008Q1 Dual BuckLimiter

new

Model D6008-74+Y+Z Dual BuckLimiter

6008K = For Kevlar to meet ASTM F887 Sections: 23.8.1, 23.8.2, & 23.8.3

P = Conlour Foam Pad with two adjustable straps and two elastic straps

W4 = Manufactured with deployment label. To deploy @ 600lbs.


Towe

r

128

Tower Fall ProTecTion reScue SySTemSrescue Systems

new CompaCt!

Model 5009E-36 - Rescue Figure 8 StrapRescue Figure 8 strap is designed to be girth hitched on a structure to aid in a rescue of an injured victim. The strap is 36" long and made from 1" yellow webbing. The Figure 8 is made from aluminum and can either be ordered without ears (Model 5009-36), or with ears (Model 5009E-36) to prevent rope from slipping down and knotting at the bottom.

Model 301SR - Self Rescue SystemThis New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8 mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape. Comes with two rappelling straps. Rated to 300 lbs.Model 301SR-50 for 50'Model 301SR-75 for 75Model 301SR-100 for 100'Custom lengths available upon request.

Model 101SRQ38-250 - Self Rescue SystemThis Self Rescue System comes complete with everything needed to perform a rescue of an injured victim from a tower or steel structure. System includes a 250' line with descender, anchor slings, pick off strap, rappelling straps, skinning knife with pouch, all packed in a backpack rope bag.Custom lengths available

Model 4578 Leather

Model 4579 Canvas

Model 4579 / 4578 - Rescue Pouch The Rescue Pouch is designed to store a knife and a Figure 8 with strap in the front pocket. The main section of the pouch can be used to store tools and miscellaneous nuts and bolts.


Tower

129

Tower Fall ProTecTion reScue SySTemSrescue Systems

Model 7003S - Dual Rescue StrapRescuing an injured co-worker has never been easier. The Dual Rescue Strap from Buckingham enables the user to safely and easily rescue a co-worker from an elevated position using our 101SR Self-Rescue System. The newly redesigned strap requires only one carabiner and keeps the descent device closer to the user for better control.

Model 81- Buck DiaperDesigned to be used for a victim that needs to

be lowered from a high elevation. The Buck Diaper provides a secure, easy method to

transport the victim.

1.) Remove carabiner & strap from pouch

3.) Step into sling with both feet

BuckStep 105RS

2.) Attach carabiner to opposite side of harness

Model 105RS - BuckStep SystemDesigned to alleviate the effects of orthostatic intolerance, also known as suspension trauma. Potentially fatal suspension trauma can occur within minutes of a fall. Since the typical rescue time is 15 minutes, the BuckStep allows a victim to immediately deploy a body support system that allows for improved blood circulation and the ability to move and flex muscles until rescue. Compact and easy to mount, the BuckStep attaches to any brand full body harness and is fully adjustable for any sized user. Order Model 105RSK1 for an arc tested system that meets ASTM F887.

Model 3816 - Tower Rescue BlocksDesigned specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a life line. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.


Towe

r

130

Tower acceSSorieS

Buck international rope Bags

Horizontal lifelines

Buckingham announces the new Buck International Line of Rope Bags featuring:• Water resistant fabric to help keep equipment dry

•1 1/4" rope access port located in the lid with cap to keep dirt and water out• Zippered ventilation panels for air circulation and quick visual identification

• Heavy duty lid zipper provides secure closure and maximum access to contents• Webbing gaps for tool holding clips and web loops for extra carabiners

• Exterior pockets for additional storage • Attachment system for use with 4375 RopePro Deluxe Back Pack accessory

Model 4375 RopePro Deluxe Back Pack Attachment (sold separately)Converts a RopePro Deluxe bag to a backpack or climbing duffle. Backpack is padded for comfort and is made with breathable materials to keep user cool and dry. Features carabiner storage loops in the shoulder straps, adjustable chest strap and reinforced edging and double stitching throughout.

new

Model 4374Large RopePro Deluxe Bag

• Measures: 16" Tall x 12" Wide

Model 4373X-Large RopePro Deluxe Bag• Measures: 24" Tall x 14" Wide

Model 5389-60 - Horizontal Lifeline SystemThis Horizontal Rope Lifeline System with 5/8" synthetic rope polysteel is a temporary fixed safety lifeline. Lifeline is suspended between two anchor points and allows a worker to freely move across a horizontal plane. This system contains a rope tensioner that maintains desired tension on lifeline, absorbs energy in the event of a fall, and permits adjustment of the horizontal

lifeline. System also includes two anchor slings, two carabiners, and a storage bag.

Buckingham Manufacturing, Excelling With Safety Since 1896.

Prom

otio

nal P

rodu

cts


132

Shirt 7 - Long Sleeve BuckManBuckMan long sleeved shirt features Climb Safe With Buck on back and the Buckingham logo on the front. Also features Buckingham on sleeve. Available in S, M, L, XL & 2X.

Shirt 6 - Short Sleeve BuckManBuckMan short sleeved T-Shirt features Climb Safe With Buck on back and the Buckingham logo on front.Available in S, M, L, XL & 2X.

Shirt 1 - Long Sleeve Buck LogoA long sleeved green shirt that features a larger Buckingham logo on back and a smaller logo on front. Also features Buckingham on the sleeve. Available in S, M, L, XL & 2X.

Shirt 2 - Short Sleeve Buck LogoA green Buckingham T-shirt that features a big Buckingham logo on the back and a small logo on front. Available in S, M, L, XL & 2X.

Buckingham Promotional Products

Promotional Products


5555CT - Carhart Buckingham JacketA green Carhart zip up jacket with two front pockets. Features the Buckingham logo on the front. Available in S, M, L, XL & 2X.

1- Buckingham HatGreen Buckingham hat that features the Buckingham logo on the front and Climber's Choice on the back.One size fits all.

Shirt 3 & 4 - Golf ShirtsBoth shirts feature the Buckingham logo on front. Available in S, M, L, XL & 2X.Shirt 3 Comes in green with a navy collar. Shirt 4 Comes in white with a green collar.

Shirt 3

Shirt 4

Shirt 5 - Denim Button UpA denim button up shirt that features the Buckingham logo on the front. Available in S, M, L, and XL.

1C - Buckingham Camo HatCamouflage hat that features the Buckingham logo on the front and Climber's choice on the back.One size fits all.


Prom

otio

nal P

rodu

cts

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com 134

5296-BL - PortfolioA black leather portfolio that features a pocket for business cards. Mea-sures 10" x 12".

1231 & 1230 - Mini BucketsCan be used for connectors, nuts and other small items. Also can be set on a desk or hung in a vehicle for other uses. Great for safety awards

5295-BL - SatchelThe Buck satchel features a spring loaded closure and measures 10 1/2" diameter x 16" length. Comes in brown (BR), burgundy (BU) and black (BL).

5005NK - Carabiner Key ChainA Non-locking key chain carabiner. Length 3", opening 5" and breaking strength is not rated. Not intended for human support.

4004 - Leather Key ChainA Buckingham key chain featuring the Buck-ingham logo.

Model 1230Model 1231

Notes:


Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg.

B1 Fiberglass Bumpers 83B2 Fiberglass Bumpers 83D6008-74+Y+Z Dual BuckLimiter PFL 103, 127D6008Q1 Dual BuckLimiter PFL 7, 103, 118, 119, 127N11T Replacement Gaff Screws 15NB9106A Climber Gaff 7, 15NB9206A Climber Gaff 7, 15NB9306 Climber Gaff 7, 15S97089 Climbers 14SB91059A Climbers 13SB91089A Climbers 13SB93059 Climbers 14SB93089 Climbers 14SB94059A Climbers 13SB94089A Climbers 13SB95059 Climbers 14SB95089 Climbers 14SB96089A Climbers 13Shirt 1 Long Sleeve T-Shirt 132Shirt 2 Short Sleeve T-Shirt 132Shirt 3 Golf Shirt 133Shirt 4 Golf Shirt 133Shirt 5 Denim Button Up Shirt 133Shirt 6 Short Sleeve T-Shirt 132Shirt 7 Long Sleeve T-Shirt 132T91059A Climbers 12T9106A Climber Gaff 15T91089A Climbers 12T9206A Climber Gaff 15T94059A Climbers 12T94089A Climbers 12TB81059 Climbers 12TB81429R Climbers 14TB87479 Climbers 12TB91059A Climbers 12TB91079 Climbers 12TB91089A Climbers 12TB91429R Climbers 14TB93059 Climbers 14TB9306 Climber Gaff 15TB93089 Climbers 14TB94059A Climbers 12TB94089A Climbers 12TB95059 Climbers 14TB95089A Climbers 14TB95089S Cleated Climber 11TB96089A Climbers 12TB97089 Climbers 14TB98479 Climbers 12U6393600 Harness 115U64A23H6E00 H’ Style Harness 88WES Ergovation SRT Attachment 931 Hat 1331C Hat 13310 Climber Shield 25101SR Self Rescue System 107101SR-100 Self Rescue System 107101SR-50 Self Rescue System 107101SR-75 Self Rescue System 107101SRQ38-250 Self Rescue System 119, 120, 128102SR After Fall Self Rescue System 107102SRS After Fall Self Rescue System 107105Q1-30 Non-Entry Manhole System 114105Q2-30 Non-Entry Manhole System 114105RS BuckStep System 110, 129106-50 Self Rescue System 10811 Replacement Gaff Screws 1511T Replacement Gaff Screws 1511213 Tool Bucket 7411215 Tool Bucket 7311216 Tool Bucket 7311217 Tool Bucket 7311218 Tool Bucket 7311219 Tool Bucket 7411223 Tool Bucket 7411227 Tool Bucket 7311229 Tool Bucket 7411233 Tool Bucket 7411239 Tool Bucket 741213 Tool Bucket 741215 Tool Bucket 73

1215TS Tool Bucket 73121514 Tool Bucket 741216 Tool Bucket 731216OS1H1L Oval Bucket 761216P Tool Bucket 7312161 Oval Bucket 7512161L Oval Bucket 7512161M2 Oval Bucket 75121615CH1L Oval Bucket 7612162 Oval Bucket 751216241 Oval Bucket 7612163 Oval Bucket 7512164 Oval Bucket 7512164L Oval Bucket 7512165L Oval Bucket 75121656 Oval Bucket 7512166 Oval Bucket 7512166L Oval Bucket 7512167 Oval Bucket 7612167H1 Oval Bucket 7612167L Oval Bucket 7612168 Oval Bucket 7612168K Oval Bucket 7612168L Oval Bucket 7612169H1K Oval Bucket 7612169H1KL Oval Bucket 761217 Tool Bucket 731218 Tool Bucket 731219 Tool Bucket 741220 Tool Bucket 741228S8 Tool Bucket 741230 Mini Tool Bucket 73, 1341231 Mini Tool Bucket 73, 134125R Buck-It Restraint System 4, 111125R1 Buck-It Restraint Retro Straps 4, 111125R2 Buck-It Mounting Bracket 4, 1111285 Electrician Belt 451305 Bosuns Chair 1051368 Ergovation Batten Seat 9316-16R-150 Throw Bag 115169064H2 Ergovation Harness 12416906H1 Ergovation ‘H’ Style Harness 9316906H2 Ergovation ‘Y’ Style Harnress 9317051 Locking Rope Snap 1011706 Locking Rope Snap 1011711 Roto Snap 101, 1021712 Locking Rope Snap 1011902 Body Belt 361958 Body Belt 361962M Body Belt 3319655M Body Belt 331988M Body Belt 331993F Body Belt 34, 931994FR Body Belt 341997T2 Body Belt 36, 9320003M Body Belt 3520005M Body Belt 3520006M Body Belt 352000EM Body Belt 322000M Body Belt 33, 124201 Leather Cleaner 382012M Body Belt 342013M Body Belt 342014M Body Belt 322015M Body Belt 322017M Body Belt 322018M Body Belt 312019M Body Belt 31202 Leather Conditioner 382100M Body Belt 312107M Body Belt 312134 Climber Straps 2421341 Climber Straps 242139 Climber Straps 2421391 Climber Straps 242234 Climber Straps 242239 Climber Straps 242401 Bucket Hook 672401-3 Bucket Hook 672402 Handline Carrier 382403 Bucket Hook 672405 Bucket Hook 67

2406 Handline Hook 382407-80 Handline System 382434 Climber Straps 242439 Climber Straps 242444 Climber Straps 242449 Climber Straps 242634 Climber Straps 24263432 Climber Straps 242639 Climber Straps 242644 Climber Straps 242649 Climber Straps 2428344 Climber Straps 242839 Climber Straps 242844 Climber Straps 242849 Climber Straps 2430-F1 Flange 118, 119, 12230-F2 Flange 118, 12230-F3 Flange 118, 12230-F4 Flange 118, 122301SR Self Rescue System 5, 107, 120, 119, 128301SR-100 Self Rescue System 5, 107, 128301SR-50 Self Rescue System 5, 107, 128301SR-75 Self Rescue System 5, 107, 1283032L Rope Grab 10430342 Locking Ladder Snap 10130351 Locking Ladder Snap 1013049 Climber Straps 243058 Step Bolts 118, 119, 1223075 Step Bolts 118, 119, 122309C Tool Bucket 73311 Tool Bucket 743111 Roof Top Fall Protection 1153114 Roof Top Fall Protection 1153118 Climber Pad 233119 Climber Pad 23312C Tool Bucket 743120 Climber Pad 233122 Climber Pad 233124 Climber Pad 233125 Climber Pad 233126 Climber Pad 223127 Climber Pad 223128 Shank Pad 2531301 Locking Ladder Snap 1013201 Climber Pad 233202 Climber Pad 203202C Climber Pad 20334299E Neoprene SuperStrap 51, 126336099E Neoprene SuperStrap 51, 126336699E Neoprene SuperStrap 51, 126337099E Neoprene SuperStrap 2, 51, 118, 120, 12633709E Neoprene SuperStrap 2, 51338099E Neoprene SuperStrap 51, 126341 Loop and Snap 383500 Climber Pad 213502 Climber Pad 213502CKL Climber Pad 213502KL Climber Pad 213503 Climber Pad 2135032 Climber Pad 2235032KL Climber Pad 2235033 Climber Footplate 2535034 Climber Pad 2235034KL Climber Pad 223504 Climber Pad 213504KL Climber Pad 21355B Ladder Fall Protection System 115355BT Ladder Fall Protection System 115355T Ladder Fall Protection System 115364277 Positioning Strap 51364299E Positioning Strap 51366077 Positioning Strap 51366099E Positioning Strap 51366677 Positioning Strap 51366699E Positioning Strap 51367077 Positioning Strap 51367099E Positioning Strap 513809R Ratchet Boom Strap 1103813 Hurt Man Basket Removal 1093813D1 Hurt Man Basket Removal 109

Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg.INDEX



3813D1Q4-95 Hurtman / High Elevation Self Rescue System 1083816 Tower Rescue Blocks 5, 109, 12938189E Positioning Strap Extention 52384277 Positioning Strap 51384299E Positioning Strap 5138523Q1 Ladder Belt 36386077 Positioning Strap 51386099E Positioning Strap 51386677 Positioning Strap 51386699E Positioning Strap 51387077 Positioning Strap 51387099E Positioning Strap 51388077 Positioning Strap 51388099E Positioning Strap 5138A Pole Top Rescue System 5038A-150 Pole Top Rescue System 5038N99E Pole Top Rescue System 5039SAM13Q3-30 Lifeline Kit 11439SAM13Q9-30 Rescue Line Kit 11439SQ1-150 Lifeline 104, 12239SQ3-30 Lifeline 120, 1223901 Temporary Anchor 104, 118, 120, 1223902-6 Temporary Anchor 104, 118, 120, 12240 Telescopic Pole Adapter 114400094 Light Replacement 844004 Leather Key Chain 1344013 Tool Pouch 444020 Tool Pouch 434023 Tool Pouch 4340231-BR Tool Pouch 434035Y Compression Tool Holder 8240351B3 Inline Hydraulic Crimper Bag 824036B4 Greenlee & Fairmont Tool Holder 824036S Nylon Carry Strap 824037 Compression Tool Holder 824040 Tool Apron 664041 Tool Apron 664042 Tool Apron 664044 Tool Apron 664045 Tool Apron 664048 Tool Apron 664051 Tool Pouch 43, 544074 Tool Pouch 444076 Tool Pouch 444079 Tool Pouch 434089 Knife Sheath 43, 5540892 Tool Pouch 4341333 Tool Bag 7141333C7R5W3 Tool Bag 5, 7141333O1R5W1 Tool Bag 7141333R5Sy Tool Bag 714164 Tool Pouch 43418 Glove Bag 774191 Tool Pouch 444200 ErgoBelt 3, 28, 118, 123, 1244201 Delux LineBacker 3, 284202 LineBacker 3, 284223 Tool Pouch 434226 Tool Pouch 4342266 Tool Pouch 42, 8442266S-BR Tool Pouch 4242666-BL Tool Pouch 424370B14 Haul Bag 6, 714371B14 Haul Bag 6, 714373 RopePro Delux Bag 6, 1304374 RopePro Delux Bag 6, 1304375 RopePro Delux Bag 6, 1304469B1-150 Back Pack Equipment Bag 79, 1084500 Tool Apron 844500Y Tool Apron 664500YM2 Tool Apron 6645003 Tool Apron 8445004 Tool Apron 8445006 Tool Apron 844501 Tool Apron 844503 Tool Holder 864503B Tool Holder 864505 Tool Apron 844509 Tool Tray 83

4510 Tool Tray 834510M2 Tool Tray 8345100 Nut & Bolt Bag 684511 Tool Tray 834512 Tool Tray 834514 Chainsaw Scabbard 864514W Chainsaw Scabbard 8645141 Chainsaw Scabbard Replacement Pocket 8645147Y Telescopic Hotstick Bag 6545148 Hoist Bag 7845149 Hoist Bag 7845150 Line Hose Bag 65451509S1 Line Hose Bag 6545151 Line Hose Bag 6545152 Hot Stick Bag 6545153 Hot Stick Bag 6545154 Hot Stick Bag 6545155 Hot Stick Bag 6545156 Hot Stick Bag 6545157 Hot Stick Bag 6545158S1-44 Line Hose Bag 654522M Tool Holder 8645297 Utility Bucket 7245299 Utility Bag 724530R Boom Tool Holder 8545300C Tool Bag 7045301R Boom Tool Holder Handle End 8545302 Boom Tool Holder Replacement Clip 854531R Boom Tool Holder 8545311R Boom Tool Holder 8545311RC Boom Tool Holder 85453112 Boom Tool Holder 8545312 Boom Tool Holder 854532R Boom Tool Holder 8545321R Boom Tool Holder 85453212 Boom Tool Holder Replacement Pocket 8545322 Boom Tool Holder Replacement Pocket 8545331Y Tool Bag 70453311R Boom Tool Holder 8545332 Tool Bag 7045333R5SY Tool Bag 7045333S Tool Bag 7045334 Tool Bag 704540MB Mesh Bag 8145400-12 Utility Bag 7245400-24 Utility Bag 7245400G1-9 Mesh Bag 8145400G1-12 Mesh Bag 8145400G1-18 Mesh Bag 8145400G1-24 Mesh Bag 8145400G1-30 Mesh Bag 8145400R2-18 Utility Bag 72, 11545402R-36 Duffle Bag 724545 Aerial Basket Cover 6545455 Aerial Basket Cover 65454551 Aerial Basket Cover 654548 Aerial Basket Cover 654550 Fiberglass Step 8645500G1 Mesh Bag 8145502 Fiberglas Bucket Step 86455200H1 Glove Bag 7745521 Utility Bag 72455300 Glove Bag 77455400 Glove Bag 77455401 Glove Bag 774555 Batter Tool Holder 824558 Wheel Chocks 57455805 Glove Bag 77455805Y Glove Bag 77455895 Glove Bag 774559 Wheel Chocks 574560 Throw Line Bag 79, 1154560G1 Mesh Bag 814561G1 Mesh Bag 814563 Bag 1074569R2-120 Rope Bag 794569R2-150 Rope Bag 794569R2-225 Rope Bag 79

4570 Nut & Bolt Bag 684570B2 Nut & Bolt Bag 684570M2 Nut & Bolt Bag 6845701 Nut & Bolt Bag 6845702C4S9 Nut & Bolt Bag 6845703C4S9 Nut & Bolt Bag 684571 Nut & Bolt Bag 684573 Nut & Bolt Bag 684574 Nut & Bolt Bag 6845771 Tower Worker Nut & Bolt Bag 6945771-16 Tower Worker Nut & Bolt Bag 6945771S9 Tower Worker Nut & Bolt Bag 6945771S9-16 Tower Worker Nut & Bolt Bag 6945772 Tower Worker Nut & Bolt Bag 6945772-16 Tower Worker Nut & Bolt Bag 6945772S9 Tower Worker Nut & Bolt Bag 6945772S9-16 Tower Worker Nut & Bolt Bag 6945775 Tool Bag 794578 Rescue Pouch 45, 110, 1284579 Rescue Pouch 110, 1284581 Ladder Bag 8145891 Bucket Tool Holder 854585 Sleeve Roll Up 784587 Blanket Roll Up 784588 Blanket Bag 784589 Bucket Tool Holder 8545911M2 Nut & Bolt Bag 684595M2 Nut & Bolt Bag 684600D1Y First Aid Blood Stopper Pouch 804600NY First Aid Blood Stopper Pouch 804600S3Y First Aid Blood Stopper Pouch 804650 Tool Pouch 434659 Tool Pouch 4348127Y-6 Positioning Strap 5148127Y-66 Positioning Strap 5148127Y-7 Positioning Strap 5148127Y-8 Positioning Strap 5148129W2Y Web SuperStrap 2, 50, 118, 120, 12648129W2Y-6 Secondary Web Lanyard 5048129W2Y-7 Secondary Web Lanyard 5048129W2Y-8 Secondary Web Lanyard 50, 12648129W2Y-9 Secondary Web Lanyard 5048129Y-6 Positioning Strap 5148129Y-66 Positioning Strap 5148129Y-7 Positioning Strap 5148129Y-8 Positioning Strap 51482D BuckSqueeze 2, 48482T BuckSqueeze 2, 48483A Practice Pole Rescue System 50483A-50 Practice Pole Rescue System 50483C-6 Wear Guard 50483C1-6 Wear Guard 50483D BuckSqueeze 48483M BuckSqueeze Rescue Trainer 50484T BuckSqueeze 48485 BuckTooth 50487 BuckWheel 50488R SuperSqueeze 2, 49488RQ4 SuperSqueez 2488RT SuperSqueeze 2, 49488RTQ4 SuperSqueeze 2488TW2 SuperSqueeze 2, 49488TW2Q3 SuperSqueeze 2, 49488W2 SuperSqueeze 2, 49488W2Q3 SuperSqueeze 2, 494888-40 Lifeline 104, 12249190 Tool Pouch 424923 Tool Pouch 424926-BR Tool Pouch 4249261 Tool Pouch 4249261S Tool Pouch 42494277 Positioning Strap 51494299E Positioning Strap 514951-BL Tool Pouch 424958 Tool Bucket 74496077 Positioning Strap 51496099E Positioning Strap 51496677 Positioning Strap 51496699E Positioning Strap 51497077 Positioning Strap 51497099E Positioning Strap 51



498077 Positioning Strap 51498099E Positioning Strap 515V+T7A16X6 Tie Back BuckStop Lanyard 7, 100, 118, 1265V+5113H BuckStop 1155V6716RD+4+Z BuckStop Dual Lanyard 1265V6716RD+H+Z BuckStop Dual Lanyard 1265VV114+Z BuckStop 995VV114.5+Z BuckStop 995VV116+Z BuckStop 995VV116S1X6 BuckStop 995VV116S1X12 BuckStop 995VV116X6 BuckStop 995VV116X12 BuckStop 995VV126+Z BuckStop 995Y2-M Arm Protectors 805000 3-Way Winch 112, 113500000 Shock Pack 1225000B Utility Bag 72, 1125002 Work Winch 1135003 Tripod 112, 11350037B Tripod Bag 11250037BY Tripod Bag 72, 11250039 Tripod 11350039BY Tripod Bag 725004 Rope Grab 104, 118, 120, 1225004B BuckGrab 505004F Rope Grab 104, 118, 120, 1225004K Rope Grab 104, 118, 1225004T Rope Grab 104, 118, 120, 1225005K Carabiner 1025005L1 Carabiner 1025005L2 Carabiner 1025005M Carabiner 1025005NK Carabiner Key Chain 1345005T Carabiner 10250051 Carabiner 1025007 Pulley 1125007L Rigging Blocks 1055007S Rigging Blocks 1055008-103EV Retractable Lanyard 1025008-83RV Retractable Lanyard 1025009-36 Figure 8 Rescue Strap 110, 1285009E-36 Figure 8 Rescue Strap 110, 119, 1285010 Personal Winch 112, 1135013 Rope Grab 104, 122502 Jumper Cable Bag 795032 Climber Insert 225032S Climber Insert 225034 Bucket Hook 6750371U Buck Hook 118, 120, 1225041 Tool Pouch 435058 Bucket Hook 67506 Tool Bag 70506P7-14 Tool Bag 705081R3 Jumper Bag 795134 Bucket Hook 675175 Bucket Hook 67519 Glove Bag 775201-50 Retractable Lifeline 1055203 Harness Beam 10652032 Dual Harness Beam 1065204 Buck Trainer 106521 Glove Bag 775231 Sleeve Bag 78526 Tower Beacon Carry Bag 795279 Carry All Belt 45528 Sleeve Bag 785288 Nut & Bolt Bag 695295-BL Satchel 1345296 Portfolio 1345299 Nut & Bolt Bag 45, 695299-BR Nut & Bolt Bag 6952993-BR Nut & Bolt Bag 45, 6952994-BR Nut & Bolt Bag 695302 Nut & Bolt Bag 45, 695358 Bucket Hook 675389-60 Horizontal Lifeline System 1305434 Bucket Hook 67546716RD+H+Z BuckStop Dual Lanyard 100, 118, 119, 126546716RDR+Z BuckStop Dual Lanyard 100, 118

54V114+Z BuckStop 9954V114.5+Z BuckStop 9954V116S1 BuckStop 9954V116+Z BuckStop 9954V126+Z BuckStop 995555CT Carhart Jacket 1335555WSA Carabiner 1025555S1 Carabiner 1025555S2 Carabiner 1025555S3 Carabiner 1025555SA Carabiner 1025555W1 Carabiner 102574 Staple Stick 56574L Staple Stick 566VV114+Z Buck Arrest 996VV114.5+Z Buck Arrest 996VV116S2X6 Buck Arrest 996VV116S2X12 Buck Arrest 996VV116X6 Buck Arrest 996VV116X12 Buck Arrest 996VV116+Z Buck Arrest 996VV126+Z Buck Arrest 996007-164DV+Z Lightweight Retractable Lifeline 7, 105, 122, 1266008-74+Y+4+Z BuckLimiter PFL 7, 1276008-74+Y+TC+Z BuckLimiter PFL 7, 103, 118, 1276008-74+Y+Y+Z BuckLimiter PFL 7, 103, 1276008-74+YV+Z BuckLimiter PFL 7, 103, 118, 1276008-74D+4+Z BuckLimiter PFL 7, 103, 1276008-74DV+Z BuckLimiter PFL 103, 1276009 Gaff Guard 2560091 Gaff Guard 2560092 Gaff Guard 2560093 Gaff Guard 2560094 Gaff Guard 256015 Saw Scabbard 606015C Saw Scabbard 6060156C Pole Saw Scabbard 606016 Straight Blade Scabbard 606016C Straight Blade Scabbard 606017 Manual Pruner Guard 616017C Manual Pruner Guard 616019 Manual Pruner Guard 616019C Manual Pruner Guard 616020 Hydraulic Chainsaw Scabbard 616020C Hydraulic Chainsaw Scabbard 6160212 Chainsaw Scabbard 6160212C Chainsaw Scabbard 616022 Chainsaw Scabbard 616022C Chainsaw Scabbard 616025 Gaff Maintenance Kit 10, 266025C Gaff Maintenance Kit 10, 266027 Gaff Gauge Holder 266029 Single Edge Axe Cover 616029C Single Edge Axe Cover 6160299 Double Edge Axe Cover 6160299C Double Edge Axe Cover 61603B3600 X’ Style Harness 89603B700 X’ Style Harness 89603E3600R3 X’ Style Harness 89603E3700R3 X’ Style Harness 89603P8Q8 X’ Style Harness 92, 124603PQ10 Harness 124603S8C600 X’ Style Harness 90603S8C600K1 BuckFit FR Harness 91603S8C600V9 BuckFit Harness 91603S8C700 X’ Style Harness 90603S8C700K1 BuckFit FR Harness 91603S8C700V9 BuckFit Harness 916030 Single Edge Axe Cover 616030C Single Edge Axe Cover 616031 Hydraulic Pruner Guard 616031C Hydraulic Pruner Guard 616058 Smooth, Single Cut File 10, 266087 Sizing Belt 3061 Step-SafeTM 118, 121, 1266102 Wrench Keeper 386103 Thread Restorer 556104 Wrench Holder 3861060 Thread Restorer 556107 Tape Thong 386109 Handline Carrier 38

6142 Manhole Cover Hook 576150 Strand Wire Dispenser 5661501 Strand Wire Dispenser 566160 Ground Rod Driver 5761991 Body Belt Harness Combo 118, 12361992 Body Belt Harness Combo 118, 120, 12361995 Body Belt Harness Combo 12561995K1 Body Belt Harness Combo 125619891 Body Belt Harness Combo 118, 119, 12361999 Body Belt Harness Combo 12562005 Hydraulic Circle Saw Guard 6162005C Hydraulic Circle Saw Guard 616203 Thread Restorer 5562040 Thread Restorer 5562070 Thread Restorer 556208 Straight Blade Scabbard 616208C Straight Blade Scabbard 616212 Thread Restorer 556217 Brush Axe Guard 616217C Brush Axe Guard 616221 Straight Blade Scabbard 616221C Straight Blade Scabbard 616222 Saw Scabbard 606222C Saw Scabbard 606223 Saw Scabbard 606223C Saw Scabbard 606225-21 Bow Saw Blade Guard 616225-24 Bow Saw Blade Guard 616225-30 Bow Saw Blade Guard 616226 Saw Scabbard 606226C Saw Scabbard 6062531 Gut Strap 376256 Gut Strap 376257 Gut Strap 376258 Suspenders 3762583 Suspenders 376259 Suspenders 3762593 Suspenders 376263 Man Rated Gut Strap 3, 376264 Man Rated Gut Strap 3, 376272 Gut Strap 37628 Tool Pouch 446286 Telephone Installer Belt 456287 Industrial Carry Belt 4562872 Industrial Carry Belt 4562995 Body Belt Harness Combo 1256303 Gaff Gauge 10, 16, 266303C Gaff Gauge - CCA 10, 166306 Tree Gaff Gauge 26637G8C500CK1 BuckFit FR Harness 91637G8C500CV9 BuckFit FR Harness 91637G8C600K1 BuckFit FR Harness 91637G8C600V9 BuckFit Harness 91637G8C700K1 BuckFit FR Harness 91637G8C700V9 BuckFit Harness 916381700 H’ Style Harness 886393500D1R3 H’ Style Harness 896383600 H’ Style Harness 896383700 H’ Style Harness 8963936E00T2 H’ Style Harness 886393600 H’ Style Harness 8963936Q Harness 1146393700 H’ Style Harness 896394600 H’ Style Harness 906398C600 H’ Style Harness 906398C700 H’ Style Harness 9064V114S2+Z Buck Arrest 9964V114+Z Buck Arrest 9964V114.5+Z Buck Arrest 9964V116+Z Buck Arrest 9964V126+Z Buck Arrest 996400 Staple Puller 566483600 H’ Style Harness 896483700 H’ Style Harness 896493500D1R3 H’ Style Harness 896493600K Kevlar Harness 906493600R3 H’ Style Harness 906493700K Kevlar Harness 906493700R3 H’ Style Harness 906494600 H’ Style Harness 90



6501 Finishing Hone 10, 266515 Saw Scabbard 60, 616515C Saw Scabbard 60, 616515CP Saw Scabbard 60, 616515CS Saw Scabbard 606515P Saw Scabbard 60, 6165155 Saw Scabbard 6065156C Saw Scabbard 6065156C Pole Saw Scabbard 606517 Saw Scabbard 606517C Saw Scabbard 6066 Burr & Barrell Nut Fastener Kit 4268D7G8C600K1 BuckFit FR Harness 9168D7G8C600V9 BuckFit Harness 9268D7G8C700K1 BuckFit FR Harness 9168D7G8C700V9 BuckFit Harness 9268D98C600 H’ Style Harness 9068D98C700 H’ Style Harness 9068D98C74C0K4 H’ Style Harness 92, 118, 1246909 Gaff Guard 256909A Gaff Guard 256909U Gaff Guard 25694 Rescue Buck 80, 110694F1 Buck Mix Rubber Pellets 80, 1107+K+K4A1100 Rope 1157V-4A150+Z Lifeline 104, 1227V-4A1100+Z Lifeline 1227V-8G150+Z Lifeline 1047VV7A13B+4 Rebar Assembly 1007003S Dual Rescue Strap 108, 1297058 Pouch 557058CK Pouch with Knife & Scissors 557058J Pouch with Knife & Scissors 557059 Tool Pouch 557071 Goat Wrench 577075 Scissors 557080 Skinning Kinfe 5470801 Skinning Kinfe 5470802 Skinning Kinfe 5470803 Skinning Kinfe 5470804 Skinning Kinfe 547085 Scissors 557086 Skinning Kinfe 5470861 Skinning Kinfe 5470862 Skinning Kinfe 5470863 Skinning Kinfe 5470864 Skinning Kinfe 547088 Skinning Kinfe 54, 557089 Skinning Kinfe 5470891 Skinning Kinfe 5470892 Skinning Kinfe 5470893 Skinning Kinfe 5470894 Skinning Kinfe 547090 Skinning Kinfe 5470901 Skinning Kinfe 5470902 Skinning Kinfe 5470903 Skinning Kinfe 5470904 Skinning Kinfe 547091 Buck ErgoBlade 5470911 Buck ErgoBlade 5470912 Buck ErgoBlade 5470913 Buck ErgoBlade 5470914 Buck ErgoBlade 547095 BuckSkinner 5470951 BuckSkinner Guard 5472 Retrieval Yoke 11277 Locking Snap Hook 528VV114+Z BuckYard 988VV114.5+Z BuckYard 988VV116S1X6 BuckYard 97, 988VV116S1X12 BuckYard 988VV116X6 BuckYard 988VV116+Z BuckYard 988VV714+Z BuckYard Stretch 988VV714.5+Z BuckYard Stretch 988VV716+Z BuckYard Stretch 988+66716D+J+6W4 Dual Shock Absorbing Lanyard 1008+66716D+JW4 Dual Shock Absorbing Lanyard 10080 Confined Space Retrieval Harness 11281 Buck Diaper 109, 129

81059 Climbers 1384V114+Z BuckYard 9884V114.5+Z BuckYard 9884V116S1 BuckYard 9884V116+Z BuckYard 9884V116+Z BuckYard 118, 12684V714+Z BuckYard Stretch 9884V714.5+Z BuckYard Stretch 9884V716S1 BuckYard Stretch 9884V716+Z BuckYard Stretch 9881429R Climbers 148451G7P5V Warning Flags & Markers 808451G7S Warning Flags & Markers 808452O3V Warning Flags & Markers 808453O1-45 Warning Flags & Markers 808453O1-50 Warning Flags & Markers 808454O3V Warning Flags & Markers 808455G7-45 Warning Flags & Markers 808455G7-50 Warning Flags & Markers 8087479 Climbers 139+N08K15A2M4 Work Positioning Rope Lanyard 100, 118, 120, 1269-8 BuckAdjuster 509009 Climber Gaff 159047 Climbers 139106 Climber Gaff 159109 Climber Gaff 1591079 Climbers 139142NR Climbers 1491429R Climbers 149202 Climber Sleeves 11, 269204 Climber Sleeves 11, 269206 Climber Gaff 159209 Climber Gaff 159215 Sleeve Fasteners 269218 Split Ring 26930 Tool Pouch 449306 Climber Gaff 159309 Climber Gaff 15931 Tool Pouch 449409 Climber Gaff 15945 LEA Tool Pouch 44949C Ballistic Tool Pouch 5, 449509 Climber Gaff 1598479 Climbers 1399E Locking Snap Hook 52996 Sleeve Fasteners 26
