8/17/2019 Banh Rang Vanh Quay Toa
1/6
MADE IN ITALY
8/17/2019 Banh Rang Vanh Quay Toa
2/6
T.A.S. is specialised in the manufacture and
sale of replacement spare parts, such asbull gears, crown wheel and pinion sets
(with straight or helical teeth), synchroniser
assemblies with molybdenum or carbon
coating, shafts, main drive gears and other
components, suitable for transmissions
and differentials of light-duty vehicles,
trucks, buses, agricultural tractors and
earthmoving machinery.
These items are heat-treated where
required and may be subjected to specialprocesses, such as Shot-Peening, Sulf BT
and corrosion proofing.
T.A.S. products are totally interchangeable
with the genuine parts, as they are madeto the same high quality standards,
utilising modern technology and thanks
to the continual specialisation of its staff.
The ‘MADE IN ITALY’ nature of the parts
has been maintained with notable efforts.
Thanks to its sales network, T.A.S. products
are distributed and appreciated
throughout the five continents and the
customers enjoy continuous support, both
from local agents and from mother-tongue commercial staff at the company
headquarters.
8/17/2019 Banh Rang Vanh Quay Toa
3/6
MADE IN ITALY
T.A.S. brand is synonymous with high
quality ‘MADE IN ITALY’ products.Its mission is to supply Italian quality spare
parts with speedy delivery.
T.A.S. is able to satisfy any special request
through its Customer Care service,
dedicated and organised in market areas,
with mother-tongue staff at the company
headquarters, who give priority to customer
satisfaction both pre- and post-sale.
The company’s competitiveness is
due to a continual in-depth analysis
of the markets and of the existing andpotential requirements, associated with
a willingness to experiment and innovate
new production lines. All this is coupled
with a managerial approach able to
foresee problems and to intervene at their
root cause, through an accurate system of
advance warning of critical situations.
Through a meticulous warehouse
management organisation, assisted by
sophisticated software based on the latest
technology, T.A.S. is able to track every
product from the manufacturing stage
upto final shipment.
The company philosophy is founded onprinciples of innovation and development,
which for T.A.S. is not limited to vast
investiments in technological equipment.
In fact, T.A.S. goes beyond and aims at
the research and increase of managerial
and operational activities, to ensure rapid
responses to the demands as they arise
from the various markets.
The professional profile of the staff
consents the management and control
of the entire manufacturing process,
commencing from the first planning stage
upto the last stage of final testing, which
comprises certificates relating to the
chemical analysis of the material utilised ,as well as to the heat-treatment.
T.A.S. makes use of ZEISS tri-dimensional
systems and equipment suitable for
the various measuring requirements. In
addition to this, mating tests are constantly
performed utilising original parts to
guarantee the quality required by the
customers.
8/17/2019 Banh Rang Vanh Quay Toa
4/6
T.A.S. has purchased modern tri-lateral
forklifts on which computers are
mounted and connected to the warehouse
management software which, assisted by
bar-code technology, guide the operator
in the selection and collection of the items
required. In the packing department thestaff are also equipped with computers and
bar-code readers which identify the parts
to be packed and trace their movements
until they are deposited in the shipping
carton. All this is constantly monitored in
real time. Thanks to this system, T.A.S. is
in a position to effect despatch within
one working day from the receipt of an
order.
Cars Buses
8/17/2019 Banh Rang Vanh Quay Toa
5/6
A.M. DIAMOND REO HILLMAN LEYLAND NISSAN TOYOTA
AUSTIN DIAMOND T HINO MACK PAZ VOLVO
BEDFORD DODGE IKARUS M.A.N. RENAULT WARNER
BMC EATON INTERNATIONAL MAZ REO WHITE
CHELSEA FARGO KEW ISUZU MAZDA R.V.I. WILLYS JEEP
CHEVROLET FIAT IVECO MERCEDES-BENZ SCANIA ZF
CLARK FORD KAMAZ MERITOR/ROCKWELL SPICER
DAEWOO FULLER KAVZ MORRIS SUZUKIDAF G.M.C. LAND ROVER NEW PROCESS TIMKEN
CARRARO FORD TRACTOR SOMECA
EBRO KUBOTA STEYR TRACTOR
FIAT TRACTOR MASSEY-FERGUSON ZT
CATERPILLAR
FURUKAWA
KOMATSU
SUMITOMO
Trucks Tractors Earthmoving Machinery
8/17/2019 Banh Rang Vanh Quay Toa
6/6
Via dell’Industria, 1 - 40050 Argelato (BO)
Tel: +39 051 758154
Fax: +39 051 732707
T.A.S. was founded in Naples in the
aftermath of World War II thanks to theingenuity and intuition of Gino Coppola.
In his vision, which was resolutely
pursued over the years and today is
vigorously re-affirmed by his children
Silvio and Mercedes, the company was
to establish itself on the international
market, not merely as a supplier of
mechanical spare parts, but also as an
Italian manufacturer catering for the
automotive aftermarket. To this end,
whilst maintaining its registered officeand main commercial and administrative
departments in Naples, T.A.S. invested
in the acquisition of two plants in theBologna area, which is the heart of the
light mechanical industry in Italy.
Until today, T.A.S. has commercialised
products for over 100 different makes.
The turnover figures and high quality
products speak for themselves. Although
already one of the leading companies in
its field, T.A.S. continues in its search for
suitable items to update its range, as well
as for additional accessory parts, such asbearings, gaskets and repair kits.