Assignment IIIntegrated Circuits Design
Ping-Hsiu Lee
Reagan High School, Houston I. S. D.
Deborah Barnett
Tidehaven High School, Tidehaven I. S. D.
Faculty Mentor: Dr. Peng Li, Assistant Professor
Department of Electrical and Computer Engineering
Assignment II
What is the Research Question?
Introduction of Integrated Circuits
Introduction of Integrated Circuits
The oldest integrated circuit (7/16-by-1/16-inches in size) was created by Jack Kilby in 1958
Introduction of Integrated CircuitsJack Kilby explains the story of integrated circuits
Introduction of Integrated Circuits
Introduction of Integrated Circuits
Introduction of Integrated CircuitsStructural domain
Behavioral domain
Physical domain
Algorithm
Finite state machineModule
descriptionBoolean function
Mask
Cell placement
Module placement
Floorplan
Processor
Register Gate
Transistor
Introduction of Integrated Circuits
Research Interests and Focus• VLSI (Very-Large-Scale-Integration) Design and CAD (computer-aided design ) with an emphasis on analog/RF optimization and test.
•Circuit simulation, parallel CAD algorithms, design and analysis of power and clock distribution networks.
•Interconnect and timing analysis, statistical circuit analysis and optimization.
My Research Assignment
Objectives:• Have basic understanding on CMOS Circuits.
• Use CMOS Circuits to design a circuit system which has basic logic functionalities.
• Analyze the circuit functionality and performance through hand (graphical) analysis.
• Verify the circuit through PSPICE simulation.
My Research AssignmentWhat is CMOS?Complementary metal–oxide–semiconductor CMOS is a major class of integrated circuits.
CMOS was also sometimes referred to as complementary-symmetry metal–oxide–semiconductor (or COS-MOS). The words "complementary-symmetry" refer to the fact that the typical digital design style with CMOS uses complementary and symmetrical pairs of p-type and n-type metal oxide semiconductor field effect transistors for logic functions.
Two important characteristics of CMOS devices are high noise immunity and low static power consumption. Significant power is only drawn when the transistors in the CMOS device are switching between on and off states.
My Research Assignment
My Research Assignment
A
BY
A
B
Y
VDD
A Y
GND
My Research Assignment
A B
Y
C
D
DC
B
AA
B
C
DY
My Research Assignment
My Research Assignment
What is the Pspice?
PSpice is a SPICE analog circuit and digital logic simulation software that runs on personal computers, hence the first letter "P" in its name. It is used in electronic design automation. The name is an acronym for Personal Simulation Program with Integrated Circuit Emphasis. Today it has evolved into an analog mixed signal simulator.
My Research Assignment
My Research Assignment
My Research Assignment
Summary:
focus on modeling basic CMOS transistor behavior using simple switch models and more sophisticated continuous models, and then analyzing circuit functionality and performance through hand (graphical) analysis and verifying through PSPICE simulation.
My Research Assignment
Student Project
Student will be able to use PSPICE (downloadable) not only to simulate circuit design process but also verify and analyze their design.
My Research AssignmentReference
CMOS Digital Integrated Circuits-3rd EditionThe lecture notes from Dr. Peng Lihttp://www.billbuxton.com/10CADchallenges.pdfhttp://bwrc.eecs.berkeley.edu/People/Faculty/jan/publications/jp44.pdfhttp://en.wikipedia.org/wiki/Main_Pagehttp://www.ema-eda.com/products/orcad/pspice.aspxhttp://www.ti.com/corp/docs/company/history/tihistory_subpage2.shtml
Acknowledgement
Special Thanks :
• Dr. Peng Li
• The staff of E3 program
• National Science Foundation (NSF)
• My partner Deborah Barnett
Top Related