An architect should consider the following items when designing an energy-efficient nonresidential
building, regardless of size and building type.
Windows placed high in the wall near the ceiling provide the most daylight for any given window area, permitti ng daylight to penetrate more deeply into the interior.
PLACE WINDOWS HIGH INTHE WALL OF EACH FLOOR
Because window glass has litt le or no resistance to heat fl ow, it is one of the primary sources of energy waste and discomfort. Window areas
should, therefore, be kept to a reasonable minimum, justi fi ed by clearly defi ned needs for
view, visual relief, venti lati on, and/or daylighti ng.
SIZE WINDOWS ACCORDINGTO USE AND ORIENTATION
USE LIGHT SHELVES
Light shelves are horizontal projecti ons placed on the outside and below a window to refl ect sunlight onto the interior ceiling, making it a light-refl ecti ng surface. At the same ti me, the light shelf shades the lower porti on of the window, reducing the amount of light near the window, which is typically overlit.
The result is more balanced daylighti ng with less glare and contrast between
light levels in the interior.
WITH LIGHT SHELVES WITHOUT LIGHT SHELVES
USE SKYLIGHTING FORDAYLIGHTING, WITH PROPER
SOLAR CONTROLS
Skylighti ng that is properly sized and orientedis an effi cient and cost-eff ecti ve source
of lighti ng. White-painted ceilings and wallsfurther improve the effi ciency. Electric lighti ng
costs, peak demand charges, and work interrupti ons during power brownouts can be
greatly reduced by using daylight.
Cost-eff ecti ve, energy-effi cient skylights can be small, spaced widely, with
“splayed” interior light wells that help refl ect and diff use the light.
WITH SKYLIGHTS WITHOUT SKYLIGHTS
Top Related